db_log
NAME
db_log - log management functions
SYNOPSIS
#include <db.h>
int
log_open(const char *dir,
int flags, int mode, DB_ENV *dbenv, DB_LOG **regionp);
int
log_close(DB_LOG *logp);
int
log_flush(DB_LOG *logp, const DB_LSN *lsn);
int
log_get(DB_LOG *logp, DB_LSN *lsn, DBT *data, int flags);
int
log_compare(const DB_LSN *lsn0, const DB_LSN *lsn1);
int
log_file(DB_LOG *logp, const DB_LSN *lsn, char *namep, size_t len);
int
log_put(DB_LOG *logp, DB_LSN *lsn, const DBT *data, int flags);
int
log_unlink(const char *dir, int force, DB_ENV *);
int
log_archive(DB_LOG *logp,
char **list[], int flags, void *(*db_malloc)(size_t));
int
log_register(DB_LOG *logp,
const DB *dbp, const char *name, DBTYPE type, u_int32_t *fidp);
int
log_unregister(DB_LOG *logp, u_int32_t fid);
int
log_stat(DB_LOG *logp, DB_LOG_STAT **spp, void *(*db_malloc)(size_t));
DESCRIPTION
The DB library is a family of groups of functions that
provides a modular programming interface to transactions
and record-oriented file access. The library includes
support for transactions, locking, logging and file page
caching, as well as various indexed access methods. Many
of the functional groups (e.g., the file page caching
functions) are useful independent of the other DB func-
tions, although some functional groups are explicitly
taining a set of files. The log is a record-oriented,
append-only file, with records identified and accessed via
DB_LSN's (database log sequence numbers).
DB_LSN's are returned on each log_put operation, and only
those DB_LSN's returned by log_put can later be used to
retrieve records from the log.
log_open
The log_open function copies a pointer, to the log identi-
fied by the directory dir, into the memory location refer-
enced by regionp.
If the dbenv argument to log_open was initialized using
db_appinit, dir is interpreted as described by
db_appinit(3).
Otherwise, if dir is not NULL, it is interpreted relative
to the current working directory of the process. If dir
is NULL, the following environment variables are checked
in order: ``TMPDIR'', ``TEMP'', and ``TMP''. If one of
them is set, log files are created relative to the direc-
tory it specifies. If none of them are set, the first
possible one of the following directories is used:
/var/tmp, /usr/tmp, /temp, /tmp, C:/temp and C:/tmp.
All files associated with the log are created in this
directory. This directory must already exist when is
called. If the log already exists, the process must have
permission to read and write the existing files. If the
log does not already exist, it is optionally created and
initialized.
If the log region is being created and log files are
already present, the log files are ``recovered'' and sub-
sequent log writes are appended to the end of the log.
The log is stored in one or more files in the specified
directory. Each file is named using the format
log.NNNNN
where ``NNNNN'' is the sequence number of the file within
the log.
The flags and mode arguments specify how files will be
opened and/or created when they don't already exist. The
flags value is specified by or'ing together one or more of
the following values:
DB_CREATE
Create any underlying files, as necessary. If the
files do not already exist and the DB_CREATE flag is
not specified, the call will fail.
The logging subsystem is configured based on the dbenv
argument to log_open, which is a pointer to a structure of
type DB_ENV (typedef'd in <db.h>). It is expected that
applications will use a single DB_ENV structure as the
argument to all of the subsystems in the DB package. In
order to ensure compatibility with future releases of DB,
all fields of the DB_ENV structure that are not explicitly
set should be initialized to 0 before the first time the
structure is used. Do this by declaring the structure
external or static, or by calling the C library routine
bzero(3) or memset(3).
The fields of the DB_ENV structure used by log_open are
described below. As references to the DB_ENV structure
may be maintained by log_open, it is necessary that the
DB_ENV structure and memory it references be valid until
the log_close function is called. If dbenv is NULL or any
of its fields are set to 0, defaults appropriate for the
system are used where possible.
The following fields in the DB_ENV structure may be ini-
tialized before calling log_open:
void *(*db_errcall)(char *db_errpfx, char *buffer);
FILE *db_errfile;
const char *db_errpfx;
int db_verbose;
The error fields of the DB_ENV behave as described
for db_appinit(3).
u_int32_t lg_max;
The maximum size of a single file in the log.
Because DB_LSN file offsets are unsigned 4-byte val-
ues, lg_max may not be larger than the maximum
unsigned 4-byte value.
If lg_max is 0, a default value is used.
The log_open function returns the value of errno on fail-
ure and 0 on success.
log_close
The log_close function closes the log specified by the
logp argument.
In addition, if the dir argument to log_open was NULL and
dbenv was not initialized using db_appinit, all files cre-
ated for this shared region will be removed, as if
log_unlink were called.
When multiple threads are using the DB_LOG handle concur-
rently, only a single thread may call the log_close func-
ure and 0 on success.
log_get
The log_get function implements a cursor inside of the
log, retrieving records from the log according to the lsn
and flags parameters.
The data field of the data structure is set to the record
retrieved and the size field indicates the number of bytes
in the record. See db_dbt(3) for a description of other
fields in the data structure. When multiple threads are
using the returned DB_LOG handle concurrently, either the
DB_DBT_MALLOC or DB_DBT_USERMEM flags must be specified
for any DBT used for data retrieval.
The flags parameter must be set to exactly one of the fol-
lowing values:
DB_CHECKPOINT
The last record written with the DB_CHECKPOINT flag
specified to the log_put function is returned in the
data argument. The lsn argument is overwritten with
the DB_LSN of the record returned. If no record has
been previously written with the DB_CHECKPOINT flag
specified, the first record in the log is returned.
If the log is empty the log_get function will return
DB_NOTFOUND.
DB_FIRST
The first record from any of the log files found in
the log directory is returned in the data argument.
The lsn argument is overwritten with the DB_LSN of
the record returned.
If the log is empty the log_get function will return
DB_NOTFOUND.
DB_LAST
The last record in the log is returned in the data
argument. The lsn argument is overwritten with the
DB_LSN of the record returned.
If the log is empty, the log_get function will return
DB_NOTFOUND.
DB_NEXT
The current log position is advanced to the next
record in the log and that record is returned in the
data argument. The lsn argument is overwritten with
the DB_LSN of the record returned.
If the pointer has not been initialized via DB_FIRST,
DB_LAST, DB_SET, DB_NEXT, or DB_PREV, log_get will
the DB_LSN of the record returned.
If the pointer has not been initialized via DB_FIRST,
DB_LAST, DB_SET, DB_NEXT, or DB_PREV, log_get will
return the last record in the log. If the first log
record has already been returned or the log is empty,
the log_get function will return DB_NOTFOUND.
If the log was opened with the DB_THREAD flag set,
calls to log_get with the DB_PREV flag set will
return EINVAL.
DB_CURRENT
Return the log record currently referenced by the
log.
If the log pointer has not been initialized via
DB_FIRST, DB_LAST, DB_SET, DB_NEXT, or DB_PREV, or if
the log was opened with the DB_THREAD flag set,
log_get will return EINVAL.
DB_SET
Retrieve the record specified by the lsn argument.
If the specified DB_LSN is invalid (e.g., does not
appear in the log) log_get will return EINVAL.
Otherwise, the log_get function returns the value of errno
on failure and 0 on success.
log_compare
The log_compare function allows the caller to compare two
DB_LSN's. Log_compare returns 0 if the two DB_LSN's are
equal, 1 if lsn0 is greater than lsn1, and -1 if lsn0 is
less than lsn1.
log_file
The log_file function maps DB_LSN's to file names. The
log_file function copies the name of the file containing
the record named by lsn into the memory location refer-
enced by namep. (This mapping of DB_LSN to file is needed
for database administration. For example, a transaction
manager typically records the earliest DB_LSN needed for
restart, and the database administrator may want to
archive log files to tape when they contain only DB_LSN's
before the earliest one needed for restart.)
The len argument is the length of the namep buffer in
bytes. If namep is too short to hold the file name,
log_file will return ENOMEM. Note, as described above,
log file names are quite short, on the order of 10 charac-
ters.
The log_file function returns the value of errno on fail-
ure and 0 on success.
The log is forced to disk after this record is writ-
ten, guaranteeing that all records with DB_LSNs less
than or equal to the one being put are on disk before
this function returns (this function is most often
used for a transaction commit, see db_txn(3)).
The caller is responsible for providing any necessary
structure to data. (For example, in a write-ahead logging
protocol, the application must understand what part of
data is an operation code, what part is redo information,
and what part is undo information. In addition, most
transaction managers will store in data the DB_LSN of the
previous log record for the same transaction, to support
chaining back through the transaction's log records during
undo.)
The log_put function returns the value of errno on failure
and 0 on success.
log_unlink
The log_unlink function destroys the log region identified
by the directory dir, removing all files used to implement
the log region. (The log files themselves and the direc-
tory dir are not removed.) If there are processes that
have called log_open without calling log_close (i.e.,
there are processes currently using the log region),
log_unlink will fail without further action, unless the
force flag is set, in which case log_unlink will attempt
to remove the log region files regardless of any processes
still using the log region.
The result of attempting to forcibly destroy the region
when a process has the region open is unspecified. Pro-
cesses using a shared memory region maintain an open file
descriptor for it. On UNIX systems, the region removal
should succeed and processes that have already joined the
region should continue to run in the region without
change, however processes attempting to join the log
region will either fail or attempt to create a new region.
On other systems, e.g., WNT, where the unlink(2) system
call will fail if any process has an open file descriptor
for the file, the region removal will fail.
In the case of catastrophic or system failure, database
recovery must be performed (see db_recovery(1) or the
DB_RECOVER flags to db_appinit(3)). Alternatively, if
recovery is not required because no database state is
maintained across failures, it is possible to clean up a
log region by removing all of the files in the directory
specified to the log_open function, as log region files
are never created in any directory other than the one
specified to log_open. Note, however, that this has the
potential to remove files created by the other DB subsys-
involved in active transactions), and that may be archived
for catastrophic recovery and then removed from the sys-
tem. If there were no file names to return, list will be
set to NULL.
Arrays of log file names are created in allocated memory.
If db_malloc is non-NULL, it is called to allocate the
memory, otherwise, the library function malloc(3) is used.
The function db_malloc must match the calling conventions
of the malloc(3) library routine. Regardless, the caller
is responsible for deallocating the returned memory. To
deallocate the returned memory, free each returned memory
pointer; pointers inside the memory do not need to be
individually freed.
The flags argument is specified by or'ing together one or
more of the following values:
DB_ARCH_ABS
All pathnames are returned as absolute pathnames,
instead of relative to the database home directory.
DB_ARCH_DATA
Return the database files that need to be archived in
order to recover the database from catastrophic fail-
ure. If any of the database files have not been
accessed during the lifetime of the current log
files, log_archive will not include them in this
list. It is also possible that some of the files
referenced in the log have since been deleted from
the system.
DB_ARCH_LOG
Return all the log file names regardless of whether
or not they are in use.
The DB_ARCH_DATA and DB_ARCH_LOG flags are mutually exclu-
sive.
The log_archive function returns the value of errno on
failure and 0 on success.
The log_archive function is the underlying function used
by the db_archive(1) utility. See the source code for the
db_archive utility for an example of using log_archive in
a UNIX environment. See the db_archive(1) manual page for
more information on database archival procedures.
log_register
The log_register function registers a file name with the
log manager and copies a file identification number into
the memory location referenced by fidp. This file identi-
fication number should be used in all subsequent log mes-
The log_register function returns the value of errno on
failure and 0 on success.
log_unregister
The log_unregister function disassociates the file name to
file identification number mapping for the file identifi-
cation number specified by the fid parameter. The file
identification number may then be reused.
The log_unregister function returns the value of errno on
failure and 0 on success.
log_stat
The log_stat function creates a statistical structure and
copies a pointer to it into the user-specified memory
location.
Statistical structure are created in allocated memory. If
db_malloc is non-NULL, it is called to allocate the mem-
ory, otherwise, the library function malloc(3) is used.
The function db_malloc must match the calling conventions
of the malloc(3) library routine. Regardless, the caller
is responsible for deallocating the returned memory. To
deallocate the returned memory, free each returned memory
pointer; pointers inside the memory do not need to be
individually freed.
The log region statistics are stored in a structure of
type DB_LOG_STAT (typedef'd in <db.h>). The following
DB_LOG_STAT fields will be filled in:
u_int32_t st_magic;
The magic number that identifies a file as a log
file.
u_int32_t st_version;
The version of the log file type.
int st_mode;
The mode of any created log files.
u_int32_t st_lg_max;
The maximum size of any individual file comprising
the log.
u_int32_t st_w_bytes;
The number of bytes over and above st_w_mbytes writ-
ten to this log.
u_int32_t st_w_mbytes;
The number of megabytes written to this log.
u_int32_t st_wc_bytes;
The number of bytes over and above st_wc_mbytes writ-
ten to this log since the last checkpoint.
u_int32_t st_wc_mbytes;
The number of megabytes written to this log since the
last checkpoint.
u_int32_t st_region_wait;
using db_appinit, the environment variable DB_HOME
may be used as the path of the database home for the
interpretation of the dir argument to log_open, as
described in db_appinit(3). Specifically, log_open
is affected by the configuration string value of
DB_LOG_DIR.
TMPDIR
If the dbenv argument to log_open was NULL or not
initialized using db_appinit, the environment vari-
able TMPDIR may be used as the directory in which to
create the log, as described in the log_open section
above.
ERRORS
The log_open function may fail and return errno for any of
the errors specified for the following DB and library
functions: atoi(3), close(2), db_version(3), fcntl(2),
fflush(3), log_close(3), log_unlink(3), lseek(2),
malloc(3), memcpy(3), memset(3), mmap(2), munmap(2),
open(2), opendir(3), read(2), readdir(3), realloc(3),
sigfillset(3), sigprocmask(2), stat(2), strchr(3),
strcpy(3), strdup(3), strerror(3), strlen(3), strncmp(3),
unlink(2), and write(2).
In addition, the log_open function may fail and return er-
rno for the following conditions:
[EAGAIN]
The shared memory region was locked and (repeatedly)
unavailable.
[EINVAL]
An invalid flag value or parameter was specified.
The DB_THREAD flag was specified and spinlocks are
not implemented for this architecture.
The specified file size was too large.
The log_close function may fail and return errno for any
of the errors specified for the following DB and library
functions: close(2), fcntl(2), fflush(3), munmap(2), and
strerror(3).
The log_flush function may fail and return errno for any
of the errors specified for the following DB and library
functions: close(2), fcntl(2), fflush(3), fsync(2),
lseek(2), malloc(3), memcpy(3), memset(3), open(2),
sigfillset(3), sigprocmask(2), stat(2), strcpy(3),
strdup(3), strerror(3), strlen(3), unlink(2), and
write(2).
In addition, the log_flush function may fail and return
errno for the following conditions:
In addition, the log_get function may fail and return er-
rno for the following conditions:
[EINVAL]
An invalid flag value or parameter was specified.
The DB_FIRST flag was specified and no log files were
found.
The log_file function may fail and return errno for any of
the errors specified for the following DB and library
functions: close(2), fcntl(2), fflush(3), malloc(3),
memcpy(3), memset(3), open(2), sigfillset(3),
sigprocmask(2), stat(2), strcpy(3), strdup(3),
strerror(3), strlen(3), and unlink(2).
In addition, the log_file function may fail and return er-
rno for the following conditions:
[ENOMEM]
The supplied buffer was too small to hold the log
file name.
The log_put function may fail and return errno for any of
the errors specified for the following DB and library
functions: close(2), fcntl(2), fflush(3), fsync(2),
lseek(2), malloc(3), memcpy(3), memset(3), open(2),
sigfillset(3), sigprocmask(2), stat(2), strcpy(3),
strdup(3), strerror(3), strlen(3), time(3), unlink(2), and
write(2).
In addition, the log_put function may fail and return er-
rno for the following conditions:
[EINVAL]
An invalid flag value or parameter was specified.
The record to be logged is larger than the maximum
log record.
The log_unlink function may fail and return errno for any
of the errors specified for the following DB and library
functions: close(2), fcntl(2), fflush(3), malloc(3),
memcpy(3), memset(3), mmap(2), munmap(2), open(2),
sigfillset(3), sigprocmask(2), stat(2), strcpy(3),
strdup(3), strerror(3), strlen(3), and unlink(2).
In addition, the log_unlink function may fail and return
errno for the following conditions:
[EBUSY]
The shared memory region was in use and the force
In addition, the log_archive function may fail and return
errno for the following conditions:
[EINVAL]
An invalid flag value or parameter was specified.
The log was corrupted.
The log_register function may fail and return errno for
any of the errors specified for the following DB and li-
brary functions: close(2), fcntl(2), fflush(3), fsync(2),
lseek(2), malloc(3), memcmp(3), memcpy(3), memset(3),
open(2), realloc(3), sigfillset(3), sigprocmask(2),
stat(2), strcpy(3), strdup(3), strerror(3), strlen(3),
time(3), unlink(2), and write(2).
In addition, the log_register function may fail and return
errno for the following conditions:
[EINVAL]
An invalid flag value or parameter was specified.
The log_unregister function may fail and return errno for
any of the errors specified for the following DB and li-
brary functions: close(2), fcntl(2), fflush(3), fsync(2),
lseek(2), malloc(3), memcpy(3), memset(3), open(2),
sigfillset(3), sigprocmask(2), stat(2), strcpy(3),
strdup(3), strerror(3), strlen(3), time(3), unlink(2), and
write(2).
In addition, the log_unregister function may fail and re-
turn errno for the following conditions:
[EINVAL]
An invalid flag value or parameter was specified.
The log_stat function may fail and return errno for any of
the errors specified for the following DB and library
functions: fcntl(2), and malloc(3).
BUGS
The log files are not machine architecture independent.
Specifically, log file metadata is not stored in a fixed
byte order.
SEE ALSO
db_archive(1), db_checkpoint(1), db_deadlock(1), db_dump(1),
db_load(1), db_recover(1), db_stat(1), db_intro(3),
db_appinit(3), db_cursor(3), db_dbm(3), db_jump(3), db_lock(3),
db_log(3), db_mpool(3), db_open(3), db_thread(3), db_txn(3)