---
title: "simDAG Cookbook"
output: 
  rmarkdown::html_vignette:
    toc: true
    toc_depth: 4
author: "Robin Denz"
vignette: >
  %\VignetteIndexEntry{simDAG Cookbook}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r, include=FALSE}
knitr::opts_chunk$set(
  collapse=TRUE,
  comment="#>",
  fig.align="center"
)
```

# Introduction

The `simDAG` package can be used to generate all kinds of data, as shown in the many examples and other vignettes of this package. In this vignette we will further illustrate the capabilities of the package, by giving very short and simplified examples on how to use `simDAG` to generate multiple different kinds of data. The vignette can be seen as a sort of "cookbook", in the sense that it includes the building blocks for many different possible data generation processes (DGP), which users can expand on for their specific needs. Note that the examples shown are not meant to be realistic, they are only meant to show the general structure of the required code.

This vignette assumes that the reader is already somewhat familiar with the `simDAG` syntax. More detailed explanations of how to simulate data using a time-fixed DAG and DAGs including time-dependent variables is given in other vignettes and the documentation of the functions. We recommend consulting these vignettes first to get a feeling for the required syntax before diving into these specific examples.

```{r, message=FALSE, warning=FALSE}
library(simDAG)
library(data.table)
library(survival)

set.seed(23414)
```

# Simulating Randomized Controlled Trials

First, we will give some examples on how data for randomized controlled trials (RCT) could be generated. In a classic RCT, the treatment of interest (below named `Treatment`) is randomly assigned to the individuals of the study, making it a "root node" (a variable with no direct causes) in the terminology of DAGs.

## Two Treatment Groups

Below is an example for an RCT with two treatment groups, a binary outcome and two baseline covariates (`Age` and `Sex`):

```{r}
dag <- empty_dag() +
  node("Age", type="rnorm", mean=55, sd=5) +
  node("Sex", type="rbernoulli", p=0.5) +
  node("Treatment", type="rbernoulli", p=0.5) +
  node("Outcome", type="binomial",
       formula= ~ -12 + Age*0.2 + Sex*1.1 + Treatment*-0.5)

data <- sim_from_dag(dag, n_sim=1000)
head(data)
```

## Three or More Treatment Groups

The example from earlier can easily be made a little more complex, by including three treatment groups instead of just two. This can be achieved by using the `rcategorical()` function as node type instead of the `rbernoulli()` function.

```{r}
dag <- empty_dag() +
  node("Age", type="rnorm", mean=55, sd=5) +
  node("Sex", type="rbernoulli", p=0.5, output="numeric") +
  node("Treatment", type="rcategorical", probs=c(0.33333, 0.33333, 0.33333),
       labels=c("Placebo", "Med1", "Med2"), output="factor") +
  node("Outcome", type="binomial",
       formula= ~ -12 + Age*0.2 + Sex*1.1 + TreatmentMed1*-0.5 + 
         TreatmentMed2*-1)

data <- sim_from_dag(dag, n_sim=1000)
head(data)
```

By setting `probs=c(0.33333, 0.33333, 0.33333)`, each treatment group is choosen with a probability of 0.33333, meaning that the resulting groups should be roughly of equal size in expectation.

## Multiple Outcome Measurements

The previous two examples assumed that there was a single fixed time at which the binary outcome was measured. Below we switch things up a bit by using a continuous outcome that is measured at 5 different points in time after baseline. The syntax is nearly the same as before, with the major difference being that we now use a `node_td()` call to define the outcome, because it is time-dependent. Additionally, because of this inclusion of a time-dependent node, we have to use the `sim_discrete_time()` function instead of the `sim_from_dag()` function. Finally, the `sim2data()` has to be called to obtain the desired output in the long-format.

```{r}
dag <- empty_dag() +
  node("Age", type="rnorm", mean=55, sd=5) +
  node("Sex", type="rbernoulli", p=0.5, output="numeric") +
  node("Treatment", type="rbernoulli", p=0.5) +
  node_td("Outcome", type="gaussian",
          formula= ~ -12 + Age*0.2 + Sex*1.1 + Treatment*-0.5, error=1)

sim <- sim_discrete_time(dag, n_sim=1000, max_t=5, save_states="all")
data <- sim2data(sim, to="long")
head(data)
```

## Non-Compliance to Treatment Assignment

Previously we assumed that the treatment was assigned at baseline and never changed throughout the study. In real RCTs, individuals are often assigned to *treatment strategies* instead (for example: one pill per week). Some individuals might not adhere to their assigned treatment strategy, by for example "switching back" to not taking the pill.

The following code shows one possible way to simulate such data. In the shown DGP, individuals are assigned to a treatment strategy at baseline. Here, `Treatment = FALSE` refers to the control condition in which the individual should not take any pills. In the intervention group (`Treatment = TRUE`), however, the individual is assigned to take a pill every week. On average, 5% of these individuals stop taking their pills with each passing week. Once they stop, they never start taking them again. The continuous outcome at each observation time depends on how many pills each individual took in total. None of the individuals in the control group start taking pills. For simplicity, the simulation is run without any further covariates for 5 weeks.

```{r}
# function to calculate the probability of taking the pill at t,
# given the current treatment status of the person
prob_treat <- function(data) {
  fifelse(!data$Treatment_event, 0, 0.95)
}

dag <- empty_dag() +
  node("Treatment_event", type="rbernoulli", p=0.5) +
  node_td("Treatment", type="time_to_event", parents=c("Treatment_event"),
          prob_fun=prob_treat, event_count=TRUE, event_duration=1) +
  node_td("Outcome", type="gaussian", formula= ~ -2 + 
            Treatment_event_count*-0.3, error=2)
sim <- sim_discrete_time(dag, n_sim=1000, max_t=5, save_states="all")
data <- sim2data(sim, to="long")
head(data)
```

What this DAG essentially means is that first, the `Treatment_event` column is generated, which includes the assigned treatment at baseline. We called it `Treatment_event` here instead of just `Treatment`, because the value in this column should be updated with each iteration and nodes of type `"time_to_event"` always split the node into two columns: status and time. By setting `event_count=TRUE` in the `node_td()` call for the `Treatment` node, a count of the amount of pills taken up to $t$ is directly calculated at each point in time (column `Treatment_event_count`), which can then be used directly to generate the `Outcome` node.

This simulation could be made more realistic (or just more complex), by for example adding either of the following things:

* making the probability of switching dependent on the outcome at $t - 1$
* making the probability of switching dependent on other variables
* allowing patients to switch back to taking the pill after discontinuation
* allowing patients in the control group to switch to the treatment

These additions are left as an exercise to the user.

## With Cluster Randomization

Instead of randomly assigning *individuals* to the treatment, many trials actually randomly assign the treatment at the level of clinics or other forms of *clusters*, which is fittingly called cluster randomization. This may be implemented in `simDAG` using the following syntax:

```{r, eval=FALSE}
dag <- empty_dag() +
  node("Clinic", type="rcategorical", probs=rep(0.02, 50)) +
  node("Treatment", type="identity", formula= ~ Clinic >= 25) +
  node("Outcome", type="poisson", formula= ~ -1 + Treatment*4 + (1|Clinic),
       var_corr=0.5)
data <- sim_from_dag(dag, n_sim=1000)
head(data)
```

In this DGP, each individual is randomly assigned to one of 50 Clinics with equal probability. All patients in clinics numbered 0-24 are assigned to the control group, while the other patients are assigned to the treatment group. The outcome is then generated using a Poisson regression with a random intercept based on the clinic.


# Simulating Observational Studies

In all previous examples, the variable of interest was a treatment that was randomly assigned and did not depend on other variables (excluding the `Clinic` for the cluster randomization example). In observational studies, the variable of interest is usually not randomly assigned. Below are some examples for generating such observational study data.

## Crossectional Data

In the following example, the treatment probability is dependent on both a categorical and a continuous variable, which both also cause the outcome:

```{r}
dag <- empty_dag() +
  node("cat", type="rcategorical", probs=c(0.4, 0.2, 0.2),
       labels=LETTERS[1:3]) +
  node("cont", type="rbeta", shape1=0.2, shape2=1.2) +
  node("treatment", type="binomial",
       formula= ~ -0.2 + catB*0.3 + catC*1 + cont*0.2) +
  node("outcome", type="gaussian",
       formula= ~ 3 + catB*1.1 + catC*0.2 + cont*-0.1,
       error=1)
data <- sim_from_dag(dag, n_sim=100)
head(data)
```

If the goal was to estimate the causal effect of the treatment on the outcome, we would need to adjust for both `cat` and `cont` here, using for example a linear regression model (same as in the DGP) or something like inverse probability of treatment weighting.

## Longitudinal Data

Here we give a small example for a longitudinal non-randomized study in which the `treatment` at $t$ is dependent on past values of itself, and on past values of the `outcome`. Additionally, the `outcome` is dependent on past values of itself and on the current `treatment`. We use the discrete-time simulation approach implemented in the `sim_discrete_time()` function to achieve this: 

```{r}
## function that generates the probability of treatment at t 
## for all individuals, given the current state of the simulation
prob_treat <- function(data, base_p, rr_treat, rr_outcome) {
  base_p * rr_treat^(data$treatment_event) * rr_outcome^(data$outcome_event)
}

## function that generates the probability of the outcome at t 
## for all individuals, given the current state of the simulation
prob_outcome <- function(data, base_p, rr_treat, rr_outcome) {
  base_p * rr_treat^(data$treatment_event) * rr_outcome^(data$outcome_event)
}

dag <- empty_dag() +
  node_td("treatment", type="time_to_event", prob_fun=prob_treat,
          parents=c("outcome_event"), event_duration=1,
          base_p=0.05, rr_treat=2, rr_outcome=0.5) +
  node_td("outcome", type="time_to_event", prob_fun=prob_outcome,
          parents=c("treatment_event"),
          event_duration=1, immunity_duration=40,
          base_p=0.01, rr_treat=0.3, rr_outcome=1.2)

sim <- sim_discrete_time(dag, n_sim=100, max_t=500)
data <- sim2data(sim, to="start_stop", overlap=TRUE)
head(data)
```

In this simulation, all individuals start out with no `treatment` and without having experienced the `outcome`. The baseline probability to get the treatment is 0.05 (`base_p=0.05`). It is twice as likely that someone who got the `treatment` in the last period of time gets it again in the next period of time (`rr_treat=2`), and it is much less likely that someone who experienced the `outcome` at $t-1$ will start treatment (`rr_outcome=0.5`). Similarly, the baseline probability of the `outcome` is `base_p=0.01`, with a much lower probability of experiencing it when currently receiving the `treatment` (`rr_treat=0.3`) and a slightly higher chance of experiencing it again when having it at $t-1$ (`rr_outcome=1.2`).

## Cox Model with Time-Varying Covariates

Below we give a small example for simulating data from a Cox model with a time-dependent covariate using the discrete-time simulation approach. In this example, there is one time-dependent covariate named `A` and a single time-to-event outcome called `Y`.

```{r}
## function that generates the probability of the outcome at t 
## for all individuals, given the current state of the simulation
prob_Y <- function(data, base_p, rr_treat) {
  base_p * rr_treat^(data$A_event)
}

dag <- empty_dag() +
  node_td("A", type="time_to_event", prob_fun=0.01,
          event_duration=20) +
  node_td("Y", type="time_to_event", prob_fun=prob_Y,
          parents=c("A_event"),
          event_duration=Inf, base_p=0.01, rr_treat=0.5)

sim <- sim_discrete_time(dag, n_sim=500, max_t=500)
data <- sim2data(sim, to="start_stop", overlap=TRUE, target_event="Y",
                 keep_only_first=TRUE)
head(data)
```

More specifically, the treatment `A` has no causes but only a general probability of being given (0.01). If it is given, it stays active for 20 days. During that time-frame, the probability of developing the outcome `Y` is reduced by 50%. The time until the first occurrence of `Y` can be described as a Cox proportional hazards model, where `A` is a time-dependent variable:

$$\lambda(t) = \lambda_0(t) \exp(\beta_AA(t))$$.

Here, $\lambda_0(t)$ is the baseline hazard, which in our example is constant over time and equal to 0.01. The relative risk used in the simulation can be recovered as the hazard ratio, e.g. it is equal to $\exp(\beta_A)$. It can be recovered as:

```{r}
mod <- coxph(Surv(start, stop, Y) ~ A, data=data)
summary(mod)
```

Note that the estimate above will not show an exact hazard ratio of 0.5, because only 500 individuals were simulated. With increasing `n_sim`, the estimated value will be closer to the true value of 0.5.

If continuous time is required, a nearly equivalent discrete-event simulation may be used:

```{r}
dag <- empty_dag() +
  node_td("A", type="next_time", prob_fun=0.01,
          event_duration=20) +
  node_td("Y", type="next_time",
          formula= ~ log(0.01) + log(0.5)*A,
          event_duration=Inf)

data <- sim_discrete_event(dag, n_sim=500, max_t=500, target_event="Y",
                           keep_only_first=TRUE)
head(data)
```

Here, we used nodes of type `"next_time"` instead, as required for `sim_discrete_event()` calls. Otherwise the specification is very similar. Note that instead of using a custom probability function, we used the `formula` interface to specify the probability of `Y`. This could have been done in the discrete-time simulation as well, but for performance reasons it is often better to use `prob_fun`.

Again, we can check the code by fitting the corresponding Cox model:

```{r}
mod <- coxph(Surv(start, stop, Y) ~ A, data=data)
summary(mod)
```

Which again shows a hazard ratio for `A` that is fairly close to 0.5, as expected. Alternatively, we could have used `model="cox"` here to directly use the `node_cox()` functionality to generate the times for `Y`. This may be useful when Weibull distributed baseline hazards should be used.

## Aalen Additive Hazards Model with Time-Dependent Covariates

Similar to the Cox model shown above, the Aalen additive hazards model with a time-dependent covariate is defined as:

$$\lambda(t) = \lambda_0(t) + \beta_AA(t)$$

The main difference here is that the coefficients are directly on the hazard difference scale and not on the log hazard ratio scale. Data from such a model can be simulated by slightly adapting the `prob_Y()` function: 

```{r}
## function that generates the probability of the outcome at t 
## for all individuals, given the current state of the simulation
prob_Y <- function(data, intercept, beta_treat) {
  h <- intercept + beta_treat*data$A_event
  return(1 - exp(-(h)))
}

dag <- empty_dag() +
  node_td("A", type="time_to_event", prob_fun=0.01,
          event_duration=20) +
  node_td("Y", type="time_to_event", prob_fun=prob_Y,
          parents=c("A_event"),
          event_duration=Inf, intercept=0.001, beta_treat=0.05)

sim <- sim_discrete_time(dag, n_sim=500, max_t=500)
data <- sim2data(sim, to="start_stop", overlap=TRUE, target_event="Y",
                 keep_only_first=TRUE)
head(data)
```

The coefficients could be recovered using an `aalen()` model from the `timereg` R package. The code is not shown to avoid an unneeded dependency on that package.

Again, we could use the `sim_discrete_event()` function instead, if we want to generate data from the same data generation process but with continuous time:

```{r}
dag <- empty_dag() +
  node_td("A", type="next_time", prob_fun=0.01,
          event_duration=20) +
  node_td("Y", type="next_time",
          formula= ~ 0.001 + A*0.05, model="aalen",
          event_duration=Inf)

data <- sim_discrete_event(dag, n_sim=500, max_t=500, target_event="Y",
                           keep_only_first=TRUE)
head(data)
```

This specification uses the `model` argument to specify that an Aalen additive hazards model should be used to generate the time until `Y`. By also specifying a `formula`, the model is fully specified and times are generated directly from `node_aalen()`.

# Miscellaneous Simulations

## Simulating Multi-Level Data

The `simDAG` package directly supports the inclusion of arbitrary mixed model syntax in the `formula` interface of nodes of type `"gaussian"`, `"binomial"` and `"poisson"`, which makes it relatively straightforward to simulate multi-level data as well. In the following example, we consider students that are nested in different schools. The outcome is a continuous score of some kind.

```{r, eval=FALSE}
dag <- empty_dag() +
  node("school", type="rcategorical", probs=rep(0.1, 10),
       labels=LETTERS[1:10]) +
  node("female", type="rbernoulli", p=0.5) +
  node("age", type="rnorm", mean=12, sd=3) +
  node("score", type="gaussian",
       formula= ~ -2 + female*3 + age*0.1 + (1|school),
       var_corr=0.5, error=1)
data <- sim_from_dag(dag, n_sim=10)
head(data)
```

In this example, there is a single random effect for school, with a standard deviation of 0.5. This example could be expanded to include a random slope for age per school, by exchanging `(1|school)` with `(age|school)`, although we would then also need to adjust the `var_corr` argument accordingly. More examples are given in the formula vignette.

## Simulating Mixture Distributions

Instead of using random effects and random slopes, another possibility to simulate a sort of "mixed" variables is to directly model it using different regression models for different individuals. This can be done using the `"mixture"` node type. Consider the following example:

```{r}
dag <- empty_dag() +
  node("strata", type="rbernoulli", p=0.5) +
  node(c("var1", "var2"), type="rnorm", mean=0, sd=1) +
  node("Y", type="mixture", parents=c("strata", "var1", "var2"),
       distr=list(
         "strata==0", node(".", type="gaussian",
                           formula= ~ -2 + var1*2 + var2*-0.5, error=1),
         "strata==1", node(".", type="gaussian",
                           formula= ~ 5 + var1*-1 + var2*2.3, error=1.5)
       ))
data <- sim_from_dag(dag, n_sim=10)
head(data)
```

Using the `distr` argument, we can easily define to which simulated individuals the corresponding node definitions should be applied to. In the example above, we defined different linear regression models for individuals with `strata==0` and for individuals with `strata==1`. It would also be possible to use entirely different node types etc.

## Simulating Outliers

One possibility to introduce a kind of outliers to a variable, is by defining the variable that should contain it as a kind of mixture distribution, made up of two parts, similar to how zero-inflated models work. First, values are generated from the general distribution. Then, if that variable exceeds some value, sample different values for it. A very simple example:

```{r}
dag <- empty_dag() +
  node(c("A", "B", "C"), type="rnorm") +
  node("Y", type="mixture", parents=c("A", "B", "C"),
       distr=list(
         "TRUE", node(".", type="gaussian", formula= ~ -2 + A*0.1 + B*1 + C*-2,
                      error=1),
         "Y > 3", node(".", type="rnorm", mean=10000, sd=500)
       ))
data <- sim_from_dag(dag, n_sim=10000)
```

Here, we first simulate 3 standard normal variables `A`, `B` and `C`, which will be used as predictor variables for our desired outcome `Y`. For `Y` itself, we use the `"mixture"` node type, which allows us to define the node as a mix of multiple node types, based on some conditions, which are generated from one by one. Because we set the first condition to `TRUE`, the linear model next to it gets applied to all individuals in the first run, generating values from the specified linear model for all individuals. In the next run we condition on `Y` itself, instructing the function to only simulate new values for `Y > 3`. These values are drawn from a normal distribution with a very high mean.

## Simulating Missing Values

Real data usually includes at least some missing values in key variables. Below is a very simple example on how users could include missing values in their data:

```{r}
dag <- empty_dag() +
  node("A_real", type="rnorm", mean=10, sd=3) +
  node("A_missing", type="rbernoulli", p=0.5) +
  node("A_observed", type="identity",
       formula= ~ fifelse(A_missing, NA, A_real))

data <- sim_from_dag(dag, n_sim=10)
head(data)
```

In this DAG, the real values of node `A` are generated first. Afterwards, an indicator of whether the corresponding values is observed is drawn randomly for each individual in node `A_missing`. The actually observed value, denoted `A_observed`, is then generated by simply using either the value of `A_real` or a simple `NA` if `A_missing==TRUE`. The missingness shown here would correspond to **missing completely at random** (MCAR) in the categorisation by XX. Although this might seem a little cumbersome at first, it does allow quite a lot of flexibility in the specification of different missingness mechanisms. For example, to simulate **missing at random** (MAR) patterns, we could use the following code instead:

```{r}
dag <- empty_dag() +
  node("A_real", type="rnorm", mean=0, sd=1) +
  node("B_real", type="rbernoulli", p=0.5) +
  node("A_missing", type="rbernoulli", p=0.1) +
  node("B_missing", type="binomial", formula= ~ -5 + A_real*0.1) +
  node("A_observed", type="identity",
       formula= ~ fifelse(A_missing, NA, A_real)) +
  node("B_observed", type="identity",
       formula= ~ fifelse(B_missing, NA, B_real))

data <- sim_from_dag(dag, n_sim=10)
head(data)
```

Here, the missingness in `A_observed` is again MCAR, because it is independent of everything. The missingness in `B_observed`, however, is MAR because the probability of missingness is dependent on the actually observed value of `A_real`.

## Simulating Measurement Error

Measurement error refers to situations in which variables of interest are not measured perfectly. For example, the disease of interest may only be detected in 90% of all patients with the disease and may falsely be detected in 1% of all patients without the disease. The same strategy shown for missing values could be used to simulate such data using `simDAG`:

```{r}
probs <- list(`TRUE`=0.9, `FALSE`=0.01)

dag <- empty_dag() +
  node("Disease_real", type="rbernoulli", p=0.5) +
  node("Disease_observed", type="conditional_prob", parents="Disease_real",
       probs=probs)

data <- sim_from_dag(dag, n_sim=10)
head(data)
```

In this example, the disease is present in 50% of all individuals. By using a node with `type="conditional_prob"` we can easily draw new values for the observed disease status by specifying the `probs` argument correctly. We could similarly extend this example to make the probability of misclassification dependent on another variable:

```{r}
# first TRUE / FALSE refers to Sex = TRUE / FALSE
# second TRUE / FALSE refers to Disease = TRUE / FALSE
probs <- list(TRUE.TRUE=0.9, TRUE.FALSE=0.01,
              FALSE.TRUE=0.8, FALSE.FALSE=0.05)

dag <- empty_dag() +
  node("Sex", type="rbernoulli", p=0.5) +
  node("Disease_real", type="rbernoulli", p=0.5) +
  node("Disease_observed", type="conditional_prob",
       parents=c("Sex", "Disease_real"), probs=probs)

data <- sim_from_dag(dag, n_sim=1000)
head(data)
```

In this extended example, `Sex` is equally distributed among the population (with `TRUE` = "female" and `FALSE` = "male"). In this example, the probability of being diagnosed with the disease (`Disease_observed`) if the disease is actually present is 0.9 for females and only 0.8 for males. Similarly, the probability of being diagnosed if the disease is not present is 0.01 for females and 0.05 for males.
