# Quick Start Primer

#### Hansjörg Neth & Nico Gradwohl, SPDS, uni.kn

#### 2025-09-15

riskyr is a toolbox for rendering risk literacy more transparent. Its goal is to gain insights into risk-related scenarios with a minimum of hassle and maximum of fun.

This page assumes that you just installed the riskyr package and are eager to see what you can do with it.
(See the User guide for a more comprehensive introduction and Neth et al., 2021, for its theoretical background.)

## Getting started

How can you use riskyr? Basically, there are two ways to get started:

1. Define your own scenario from risk-related information (typically provided in terms of probabilities).

2. Inspect one of 24 predefined scenarios to get a glimpse of what types of scenarios are possible.

Either way, you will soon explore some specific risk-related scenario and uncover relationships between its parameters. Please load the package first, if you have not already done so:

    library("riskyr")  # loads the package

### Defining a scenario

Let’s launch your riskyr-career by creating a ficticious risk scenario that we construct from scratch:1

#### Example

> Identifying reoffenders

> Imagine you are developing a test to predict if a jailed criminal offender will reoffend after his or her release. Your research yields the following information:

> 1. 45% of 753 jailed offenders in some prison re-offend after they are released (`prev = .45`).
> 2. Your test correctly detects those who will re-offend in 98% of the cases (`sens = .98`).
> 3. Your test falsely identifies 54% of those who will not re-offend as potential re-offenders. Conversely, this implies that your test correctly identifies 46% of those that will not reoffend (`spec = .46`).

> John D. is about to get released and is tested. The test predicts that he will reoffend.

> What is the probability that John D. will actually reoffend, given his test result?

To answer this question, you could calculate the corresponding probabilities or frequencies (as explained in the user guide). Alternatively, you can use the `riskyr()` function to create a riskyr scenario that you can modify, inspect, and visualize in various ways.

#### Necessary scenario information

First, we need to translate the numeric information provided in our example into parameter values:

1. The probability of reoffending provides the prevalence in our population: `prev = .45`.

2. The test’s conditional probability of correctly detecting a reoffender provides its sensitivity: `sens = .98`.

3. The test’s conditional probability of correctly detecting someone who will not reoffend provides its specificity: `spec = .46`.
   (This corresponds to a false alarm rate `fart = 1 - spec = .54`.)

4. In addition, the population size of your sample was mentioned to be `N = 753`.2

The following code defines a perfectly valid `riskyr` scenario from 3 essential probabilities:

    # Create a minimal scenario (from probabilities):
    my_scenario <- riskyr(prev = .45,
                          sens = .98,
                          spec = .46)

This creates `my_scenario` from 3 essential probabilities (`prev`, `sens`, and `spec` or `fart`) and computes a suitable population size `N` of 1000.

Alternatively, we could create the same minimal scenario from 4 essential frequencies (if they are known). The following code creates the scenario a second time, but now uses the frequencies of `my_scenario` to do so:

    # Create a minimal scenario (from frequencies):
    my_scenario_2 <- riskyr(hi = my_scenario$hi,
                            mi = my_scenario$mi,
                            fa = my_scenario$fa,
                            cr = my_scenario$cr)

If this succeeds, `my_scenario` and `my_scenario_2` contain the same information:

    all.equal(my_scenario, my_scenario_2)
    #> [1] TRUE

#### Optional scenario information

To make various outputs more recognizable, many aspects of a `riskyr` scenario can be described by setting optional `arguments`:

- `scen_lbl` specifies a label by which you can recognize the scenario (e.g., “Identifying reoffenders”).

- `popu_lbl` specifies the population of interest (e.g., “inmates”).

- `cond_lbl` specifies the condition of interest (i.e., “reoffending”).

- `cond_true_lbl` specifies a label for the condition being true (“offends again”).

- `cond_false_lbl` specifies a label for the condition being false (“does not offend again”).

- `dec_lbl` specifies the nature of the decision, prediction, or test (“test result”).

- `dec_pos_lbl` specifies a positive decision regarding the condition (“predict to reoffend”).

- `dec_neg_lbl` specifies a negative decision regarding the condition (“predict to not reoffend”).

- `hi_lbl`, `mi_lbl`, `fa_lbl`, and `cr_lbl` specify the four possible combinations of conditions and decisions:

  1. hit: The test predicts that the inmate reoffends and s/he does (“reoffender found”);
  2. miss: The test predicts that the inmate does not reoffend but s/he does (“reoffender missed”);
  3. false alarm: The test predicts that the inmate reoffends but s/he does not (“false accusation”;
  4. correct rejection: The test predicts that the inmate does not reoffend and s/he does not (“correct release”).

Whereas specifying three essential probabilities is necessary to define a valid `riskyr` scenario, providing `N` and the other arguments are entirely optional. For illustrative purposes, we create a very well-specified `riskyr` scenario:

    # Create a scenario with custom labels:
    my_scenario <- riskyr(scen_lbl = "Identifying reoffenders",
                          popu_lbl = "prison inmates",
                          cond_lbl = "reoffending",
                          cond_true_lbl = "reoffends", cond_false_lbl = "does not reoffend",
                          dec_lbl = "test result",
                          dec_pos_lbl = "predict to\nreoffend", dec_neg_lbl = "predict to\nnot reoffend",
                          hi_lbl = "reoffender found", mi_lbl = "reoffender missed",
                          fa_lbl = "false accusation", cr_lbl = "correct release",
                          prev = .45,  # prevalence of being a reoffender.
                          sens = .98,  # p( will reoffend | offends again )
                          spec = .46,  # p( will not reoffend | does not offend again )
                          fart =  NA,  # p( will reoffend | does not offend gain )
                          N = 753,     # population size
                          scen_src = "(a ficticious example)")

#### Viewing scenario information

> The simple graph has brought more information to the data analyst’s mind than any other device. (…) the meat of the matter can usually be set out in a graph.
> (John W. Tukey)3

We always can inspect the details of `my_scenario` by computing additional metrics and studying their values with `summary(my_scenario)`. But anyone who regularly works with data knows that graphs can provide key insights faster and in different ways than written summaries and tables. To illustrate this point, we create and inspect some visualizations of our scenario.

##### Prism plot

    plot(my_scenario)

A prism plot (or network diagram) shows key frequencies as colored boxes and corresponding probabilities as the edges that connect the boxes. In this particular version, the size of the boxes is fixed. However, we can visualize the relative size of frequencies by using the `area` argument and show the names of the frequencies (as provided by our text labels) by adding the `f_lbl = "nam"` argument. To save space, we do not show the plots here, but please try and see for yourself:

    plot(my_scenario, area = "sq", f_lbl = "nam", p_lbl = "mix")  # show frequency names
    plot(my_scenario, area = "hr", f_lbl = "num", p_lbl = "num")  # only numeric labels

The resulting graph maps frequency to the size of square boxes, which makes it easier to distinguish between cases with high and with low frequencies.

##### Practice

- Plot `my_scenario` with the option `area = "hr"`. What do you see?
- Add `by = "cdac"` as another argument to your plotting call. How does the resulting plot relate to the previous ones?
- When calling `plot(my_scenario)`, riskyr creates a plot of `type = "prism"` by default:

Use `?plot_prism` for the documentation of `plot_prism()` to learn about and try out additional arguments.

##### Icon array

An icon array displays the entire population of inmates classified by condition (whether they will reoffend or not) and decisions (our test’s predictions). We can use this display for our scenario by using the `plot()` function and specifying the `type = "icons"`:

    plot(my_scenario, type = "icons")

From the icon array, we can easily see that roughly half of the inmates reoffend (see the icons in dark green and dark blue). The majority of the reoffenders are classified correctly (shown in dark green rather than dark blue).

But where is John D.? His test result predicted that he would reoffend. Depending on his actual behavior, this means that he will either be classified as a “reoffender found” (if he actually reoffends: dark green icons) or as a “false accusation” (if he does not reoffend: light red icons). As there are a similar number of both types of icons (with some skew towards “reoffenders found”), it appears that his chances of actually reoffending are only slightly higher than chance. To dig deeper into the dirty details of `my_scenario`, let us look at its `summary()`:

    summary(my_scenario)
    #> Scenario:  Identifying reoffenders
    #>
    #> Condition:  reoffending
    #> Decision:  test result
    #> Population:  prison inmates
    #> N =  753
    #> Source:  (a ficticious example)
    #>
    #> Probabilities:
    #>
    #>  Essential probabilities:
    #> prev sens mirt spec fart
    #> 0.45 0.98 0.02 0.46 0.54
    #>
    #>  Other probabilities:
    #>  ppod   PPV   NPV   FDR   FOR   acc
    #> 0.738 0.598 0.966 0.402 0.034 0.694
    #>
    #> Frequencies:
    #>
    #>  by conditions:
    #>  cond_true cond_false
    #>        339        414
    #>
    #>  by decision:
    #> dec_pos dec_neg
    #>     556     197
    #>
    #>  by correspondence (of decision to condition):
    #> dec_cor dec_err
    #>     522     231
    #>
    #>  4 essential (SDT) frequencies:
    #>  hi  mi  fa  cr
    #> 332   7 224 190
    #>
    #> Accuracy:
    #>
    #>  acc:
    #> 0.694

The text output (printed in R’s Console) provides a brief description of our scenario (i.e., its name, the condition and decision of interest, as well as the type and size of population), followed by a range of numeric parameters (structured into probabilities, frequencies, and overall accuracy).

In the present case, we were interested in a person’s conditional probability of reoffending given a positive test result. This metric is also known as the positive predictive value (PPV). Our summary information shows `PPV = 0.598`. Thus, based on the information provided, John D.’s probability of reoffending is 59.8% (quite in line with our visual estimate from the icon array above):

#### Alternative perspectives

An alternative way to view the our scenario is a frequency tree that splits the population into two subgroups (e.g., by the two possible results of our test) and then classify all members of the population by the possible combinations of decision and actual condition, yielding the same four types of frequencies as identified above (and listed as `hi`, `mi`, `fa`, and `cr` in the `summary` above):

    plot(my_scenario, type = "tree", by = "dc")  # plot tree diagram (splitting N by decision)

The frequency tree also shows us how the PPV (shown on the arrow on the lower left) can be computed from frequencies (shown in the boxes): PPV = (number of offenders found)/(number of people predicted to reoffend) (or `PPV = hi/dec_pos`). Numerically, we see that `PPV = 332/556`, which amounts to about 60% (or `1 - 0.403`).

The tree also depicts additional information that corresponds to our `summary` from above. For instance, if we had wondered about the negative predictive value (NPV) of a negative test result (i.e., the conditional probability of not offending given that the test predicted this), the tree shows this to be `NPV = 190/197` or about 96.4% (as `NPV = cr/dec_neg`). Again, this closely corresponds to our `summary` information of `NPV = 0.966`.4

A good question to ask is: To what extend do the positive and negative predictive values (PPV and NPV) depend on the likelihood of reoffending in our population (i.e., the condition’s prevalence)? To answer this, the following code allows to show conditional probabilities (here `PPV` and `NPV`) as a function of `prev` (and additionally assumes a 5%-uncertainty concerning the exact parameter values):

    plot(my_scenario, type = "curve", uc = .05)

As before, we can read off that the current values of `PPV = 59.76%` and `NPV = 96,56%`, but also see that our 5%-uncertainty implies relatively large fluctuations of the exact numeric values. Importantly, the curves also show that the prevalence value is absolutely crucial for the value of both `PPV` and `NPV`. For instance, if `prev` dropped further, the `PPV` of our test was also considerably lower. In fact, both the PPV and NPV always vary from 0 to 1 depending on the value of `prev`, which means that specifying them is actually meaningless when the corresponding value of `prev` is not communicated as well. (See the guide on functional perspectives for additional information and options.)

Having illustrated how we can create a scenario from scratch and begin to inspect it in a few ways, we can now turn towards loading scenarios that are contained in the riskyr package.

### Using existing scenarios

As defining your own scenarios can be cumbersome and the literature is full of existing problems (that study so-called Bayesian reasoning), riskyr provides a set of — currently 25) — pre-defined scenarios (stored in a list `scenarios`). The following table provides a first overview of the scenarios available, including their relevant condition, their population size `N`, and basic probability information:

Scenario | Condition | N | prev | sens | spec | fart
--- | --- | --- | --- | --- | --- | ---
Bowel cancer screening | Bowel cancer | 2030 | 0.015 | 0.667 | 0.910 | 0.090
Cab problem | Company | 100 | 0.150 | 0.800 | 0.800 | 0.200
Hemoccult test | Colorectal cancer | 100000 | 0.300 | 0.050 | 0.970 | 0.030
Mammography | Breast cancer | 1000 | 0.010 | 0.800 | 0.900 | 0.100
Mammography (freq) | Breast cancer | 1000 | 0.010 | 0.800 | 0.904 | 0.096
Mammography (prob) | Breast cancer | 1000 | 0.010 | 0.800 | 0.904 | 0.096
Mushrooms | Color | 100 | 0.200 | 0.200 | 0.950 | 0.050
Musical town | Choir membership | 1000 | 0.500 | 0.200 | 0.400 | 0.600
PSA test (baseline) | Prostate cancer | 1000 | 0.063 | 0.210 | 0.940 | 0.060
PSA test (patients) | Prostate cancer | 1000 | 0.500 | 0.210 | 0.940 | 0.060
Psylicraptis screening | Psylicraptis | 100 | 0.010 | 0.900 | 0.990 | 0.010
Sepsis | Sepsis | 100 | 0.100 | 0.800 | 0.900 | 0.100
Amniozentese | Trisomie 21 | 10000 | 0.080 | 0.994 | 0.995 | 0.005
HIV-Test | HIV | 100000 | 0.000 | 1.000 | 1.000 | 0.000
HIV-Test | HIV | 250000 | 0.000 | 1.000 | 1.000 | 0.000
HIV-Test | HIV | 10000000 | 0.000 | 0.997 | 1.000 | 0.000
HIV-Test | HIV | 10000000 | 0.000 | 0.997 | 1.000 | 0.000
Mammografie | Brustkrebs | 1000 | 0.010 | 0.900 | 0.910 | 0.090
Mammografie | Brustkrebs | 1000 | 0.010 | 0.900 | 0.910 | 0.090
Mammografie | Brustkrebs | 1000 | 0.600 | 0.900 | 0.910 | 0.090
Mammografie | Brustkrebs | 1000 | 0.940 | 0.900 | 0.910 | 0.090
Nackenfaltentest (NFT) | Trisomie 21 | 1000 | 0.010 | 0.900 | 0.950 | 0.050
Nackenfaltentest (NFT) | Trisomie 21 | 10000 | 0.019 | 0.800 | 0.820 | 0.180
Sigmoidoskopie | Darmkrebs | 1000000 | 0.000 | 0.700 | 0.900 | 0.100
Sigmoidoskopie | Darmkrebs | 1000000 | 0.035 | 0.700 | 0.900 | 0.100

In the following, we show you can select and explore these scenarios.

#### 1. Selecting a scenario

Let us assume you want to learn more about the controversy surrounding screening procedures of prostate-cancer (known as PSA screening). Scenario 21 in our collection of `scenarios` is from an article on this topic (Arkes & Gaissmaier, 2012). To select a particular scenario, simply assign it to an R object. For instance, we can assign Scenario 10 (i.e., `scenarios$n10`) to an R object `s10`:

    s10 <- scenarios$n10  # assign pre-defined Scenario 10 to s10.

#### 2. Printing scenario information

As each scenario is stored as a list, different aspects of a scenario can be printed by their element names:

    # Show basic scenario information:
    s10$scen_lbl  # shows descriptive label:
    #> [1] "PSA test (patients)"
    s10$cond_lbl  # shows current condition:
    #> [1] "Prostate cancer"
    s10$dec_lbl   # shows current decision:
    #> [1] "PSA-Test"
    s10$popu_lbl  # shows current population:
    #> [1] "Male patients with symptoms"
    s10$scen_apa  # shows current source:
    #> [1] "Arkes, H. R., & Gaissmaier, W. (2012). Psychological research and the prostate-cancer screening controversy. Psychological Science, 23(6), 547--553."

A description of the scenario can be printed by inspecting `s10$scen.txt`:

    With a cutoff point of 4 ng/ml, the PSA test is reported to have a sensitivity of approximately 21% and a specificity of approximately 94% (Thompson et al., 2005).  That means the PSA test will correctly classify 21% of the men with prostate cancer and 94% of the men who do not have prostate cancer.  Conversely, the test will miss about 79% of the men who actually have prostate cancer, and raise a false alarm in 6% of the men who actually do not have prostate cancer. Suppose that this test is given to 1,000 patients at a urology clinic who have symptoms diagnostic of prostate cancer.  Perhaps 50% of these men truly have prostate cancer. Table 1 depicts this situation.  Of the 135 men who test positive, 105 actually have prostate cancer.  Thus, the positive predictive value of the PSA test in this situation is approximately 78% (i.e., 105/135 _ 100).

As explained above, an overview of the main parameters of a scenario is provided by `summary()`:

    summary(s10) # summarizes key scenario information:
    #> Scenario:  PSA test (patients)
    #>
    #> Condition:  Prostate cancer
    #> Decision:  PSA-Test
    #> Population:  Male patients with symptoms
    #> N =  1000
    #> Source:  Arkes & Gaissmaier (2012), p. 550
    #>
    #> Probabilities:
    #>
    #>  Essential probabilities:
    #> prev sens mirt spec fart
    #> 0.50 0.21 0.79 0.94 0.06
    #>
    #>  Other probabilities:
    #>  ppod   PPV   NPV   FDR   FOR   acc
    #> 0.135 0.778 0.543 0.222 0.457 0.575
    #>
    #> Frequencies:
    #>
    #>  by conditions:
    #>  cond_true cond_false
    #>        500        500
    #>
    #>  by decision:
    #> dec_pos dec_neg
    #>     135     865
    #>
    #>  by correspondence (of decision to condition):
    #> dec_cor dec_err
    #>     575     425
    #>
    #>  4 essential (SDT) frequencies:
    #>  hi  mi  fa  cr
    #> 105 395  30 470
    #>
    #> Accuracy:
    #>
    #>  acc:
    #> 0.575

Note that — in this particular population — the prevalence for the condition (Prostate cancer) is assumed to be relatively high (with a value of 50%).

#### 3. Visualizing frequencies and probabilities

To eyeball basic scenario information, we can visualize it in many different ways. To save space, we do not show the plots here, but please try and see for yourself:

    plot(s10, type = "tab")                   # plot 2x2 table
    plot(s10, type = "icons", cex_lbl = .75)  # plot an icon array
    plot(s10, type = "prism", area = "sq")    # plot a network/prism diagram
    plot(s10, type = "area")                  # plot an area plot
    plot(s10, type = "bar", dir = 2)          # plot a bar chart

These initial inspections reveal that the overall accuracy of the decision considered (PSA test (patients)) is not great: There are almost as many cases of incorrect classifications (shown in blue) as correct ones (shown in green). In fact, both the summary and the icon array note that the overall accuracy of the test is at 57.5%. Given that green squares signal correct classifications and blue squares signal incorrect classifications, it is immediately obvious that our main issue with accuracy here consists in so-called misses: Patients with cancer that remain undetected (marked with “FN” and denoted by icons in lighter blue).

Next, we could another prism diagram, to further illuminate the interplay between probabilities and frequencies in this scenario:

    plot(s10,
         by = "cddc",      # perspective: upper half by condition, lower half by decision
         area = "hr",      # frequency boxes as horizontal rectangles (scaled to N)
         p_lbl = "num")    # probability labels: numeric only

This variant of the prism plot shows how the probability values of key condition and decision parameters split the assumed population of `N = 1000` patients into subgroups that correspond to 9 frequencies (also listed in the summary). Calling the same command with the optional argument `p_lbl = "nam"` would print the probability names, rather than their values (see also the options `p_lbl = "min"` and `"mix"`.) The middle row of boxes shows the four essential frequencies (of hits `hi`, misses `mi`, false alarms `fa`, and correct rejections `cr`) in colors corresponding to the icon array above. Setting `area = "hr"` in our `plot` command switched the default display (of rectangular boxes) to a version in which the frequency boxes at each level of the network are shown as horizontal rectangles (hence `hr`) and the box widths are scaled to add up to the population width `N` on each level. Thus, the relative width of each box illustrates the frequency of corresponding cases, making it easy to spot locations and paths with few or many cases.

A fact that was not so obvious in the icon array — but shown in the lower half of the prism plot — is that the current scenario yields mostly negative decisions (865 out of 1000, or 86.5%). Of those negative decisions, 470 (or 54.34%) are correct (see `cr` shown in light green) and 395 (or 45.66%) are incorrect (see `mi` shown in dark red). The ratio `cr/dec_neg = 470/865 = 54.34`% indicates the negative predictive value (`NPV`) of the test.

##### Practice

- Can you find the current positive predictive value (`PPV`) in the diagram? (Hint: Its value marks an arrow between two boxes, but is also shown on the margin and was contained in the summary above.)

- Re-create the prism plot of `s10` from different perspectives (e.g., `by = "cdac"`) and different area settings (e.g., `area = "sq"`, see “?plot_prism” for the options available). For instance, what would the following commands plot:

    plot(s10, by = "cdac", area = "sq")
    plot(s10, by = "ac", area = "hr")

#### 4. Visualizing probabilistic relationships

One way to further understand the relations between basic probabilities — like the prevalence `prev`, which does not depend on our decision, but only on the environmental probability of the condition (here: “Prostate cancer”) — and probabilities conditional on both the condition and on features of the decision (like `PPV` and `NPV`) is to plot the latter as a function of the former. Calling `type = "curve"` does this for us. To save space, we do not show the plots here, but please try and see for yourself:

    plot(s10, type = "curve",
         what = "all",  # plot "all" available curves
         uc = .05)      # with a 5%-uncertainty range

The additional argument `what = "all"` instructed riskyr to provide us with additional curves, corresponding to the percentage of positive decisions (`ppod`) and overall accuracy (`acc`). Just like `PPV` and `NPV`, the values of these metrics crucially depend on the value of the current prevalence (shown on the x-axis) and on our current range of uncertainty (shown as shaded polygons around the curves). Interestingly, the curves of `ppod` and `acc` appear to be linear, even though the riskyr function plots them in exactly the same way as `PPV` and `NPV`. Would you have predicted this without seeing it?

##### Practice

- Explain why the line of `acc` intersects the curve of `PPV` at the point at the same point as the curve of `NPV`.

While the curves shown for `PPV` and `NPV` so far illustrate their dependence on the prevalence (`prev`), we can also ask: How do these conditional probabilities vary as a function of the decisions sensitivity (`sens`) and specificity (`spec`)? To provide a visual answer to this question, we plot them as 3D planes (i.e., as functions of both `sens` and `spec`, for a given value of `prev`) with the following commands:5

    ## Plot plane of PPV and NPV as functions of sens and spec (for given prev):
    plot(s10, type = "plane", what = "PPV", cex_lbl = .7)  # PPV by sens x spec (fixed prev)
    plot(s10, type = "plane", what = "NPV", cex_lbl = .7)  # NPV by sens x spec (fixed prev)

This comparison shows that the curves of `PPV` and `NPV` (created by `type = "curve"` above) were only two out of an infinite number of possible intersections of two planes (created by `type = "plane"` here). Consequently, the current values of `PPV` and `NPV` (shown as yellow points on the planes) crucially depend on the condition’s prevalence (`prev`), the sensitivity (`sens`), and the specificity (`spec`).

In retrospect, these dependencies make it clear why it is so hard to provide an answer to the seemingly simple question: What’s the probability of having some condition when testing positive or negative for it? While riskyr cannot simplify this issue, we hope that you are convinced that it helps to compute, transform, and see some relationships that are not immediately obvious from the mathematical definitions of the underlying concepts. If you feel that this improves your understanding, we came a little closer to our goal of rendering risk literacy more transparent.

##### Practice

- Scenario 9 in the riskyr collection of `scenarios` contains a version of the same situation that assumes a different population (with a lower prevalence value for the same condition). Inspect and explore the consequence of this change by following the same steps for `s9` as for `s10` above.

Here are the first steps:

    # Select Scenario 9:
    s9 <- scenarios$n9  # assign pre-defined Scenario 9 to s9.

    # Basic scenario information:
    s9$scen_lbl  # shows descriptive label:
    #> [1] "PSA test (baseline)"
    s9$popu_lbl  # shows current population:
    #> [1] "Males (general population)"

Now re-do the plots (for `s10` above), and note the changes between `s9` and `s10`. Importantly, the properties of the test are identical for both scenarios — only the population (i.e., its prevalence for the condition) has changed.

### Conclusion

This introduction gets you started with using riskyr (see Neth et al., 2021, for additional details). Have fun by exploring the provided examples and creating your own scenarios!

## References

- Arkes, H. R., & Gaissmaier, W. (2012). Psychological research and the prostate-cancer screening controversy. Psychological Science, 23, 547–553.

- Dressel, J., & Farid, H. (2018). The accuracy, fairness, and limits of predicting recidivism. Science Advances, 4, eaao5580.

- Neth, H., Gradwohl, N., Streeb, D., Keim, D.A., & Gaissmaier, W. (2021). Perspectives on the 2x2 matrix: Solving semantically distinct problems based on a shared structure of binary contingencies. Frontiers in Psychology, 11, 567817. doi: 10.3389/fpsyg.2020.567817 (Available online)

### Resources

The following resources and versions are currently available:

Type: | Version: | URL:
--- | --- | ---
A. riskyr (R package): | Release version | https://CRAN.R-project.org/package=riskyr
| Development version | https://github.com/hneth/riskyr/
B. riskyrApp (R Shiny code): | Online version | https://riskyr.org/
| Development version | https://github.com/hneth/riskyrApp/
C. Online documentation: | Release version | https://hneth.github.io/riskyr/
| Development version | https://hneth.github.io/riskyr/dev/

## Contact

We appreciate your feedback, comments, or questions.

- Please report any riskyr-related issues at https://github.com/hneth/riskyr/issues/.

- Contact us at contact.riskyr@gmail.com with any comments, questions, or suggestions.

## All riskyr vignettes

Nr. | Vignette | Content
--- | --- | ---
A. | User guide | Motivation and general instructions
B. | Data formats | Data formats: Frequencies and probabilities
C. | Confusion matrix | Confusion matrix and accuracy metrics
D. | Functional perspectives | Adopting functional perspectives
E. | Quick start primer | Quick start primer

1. The data is made-up, but the issue is real. See Dressel and Farid (2018) for a recent study on this issue.↩︎

2. If no population size value `N` is specified, a suitable value is provided.↩︎

3. Tukey, J.W. (1962). The future of data analysis. (In: The Collected Works of John W. Tukey, Volume 3, p. 457).↩︎

4. The difference between `NPV = 190/197 = 0.964467` (when computing the ratio of frequencies) and `NPV = 0.966` (in the `summary`) is due to rounding tree frequencies to integer values. If absolute precision is required, we can plot the frequency tree without rounding by adding an argument `round = FALSE`. ↩︎

5. The `par()` commands before and after the calls to `plot()` in this example are not needed if you re-create the plots for yourself. They only set and reset the R plotting space to allow plotting both planes next to each other.↩︎