Internet Engineering Task Force (IETF) R. Bush
Request for Comments: 6945 Internet Initiative Japan
Category: Standards Track B. Wijnen
ISSN: 2070-1721 RIPE NCC
K. Patel
Cisco Systems
M. Baer
SPARTA
May 2013
Definitions of Managed Objects for the
Resource Public Key Infrastructure (RPKI) to Router Protocol
Abstract
This document defines a portion of the Management Information Base
(MIB) for use with network management protocols in the Internet
community. In particular, it describes objects used for monitoring
the Resource Public Key Infrastructure (RPKI) to Router Protocol.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6945.
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Requirements Language . . . . . . . . . . . . . . . . . . 2
2. The Internet-Standard Management Framework . . . . . . . . . 2
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 21
6. Security Considerations . . . . . . . . . . . . . . . . . . . 22
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.1. Normative References . . . . . . . . . . . . . . . . . . 23
7.2. Informative References . . . . . . . . . . . . . . . . . 23
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 24
1. Introduction
This document defines a portion of the Management Information Base
(MIB) for use with network management protocols in the Internet
community. In particular, it defines objects used for monitoring the
RPKI-Router Protocol [RFC6810].
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in RFC
2119 [RFC2119].
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. Managed objects are accessed via a virtual
information store, termed the Management Information Base or MIB.
MIB objects are generally accessed through the Simple Network
Management Protocol (SNMP). Objects in the MIB are defined using the
mechanisms defined in the Structure of Management Information (SMI).
This memo specifies a MIB module that is compliant to the SMIv2,
which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579
[RFC2579], and STD 58, RFC 2580 [RFC2580].
3. Overview
The objects defined in this document are used to monitor the RPKI-
Router Protocol [RFC6810]. The MIB module defined here is broken
into these tables: the RPKI Router RPKI-Router Cache Server (Connection) Table,
the RPKI Router RPKI-Router Cache Server Errors Table, and the RPKI Router RPKI-Router Prefix
Origin Table.
The RPKI Router RPKI-Router Cache Server Table contains information about the
state and current activity of connections with the RPKI router RPKI-router cache
servers. It also contains counters for the number of messages
received and sent, plus the number of announcements, withdrawals, and
active records. The RPKI Router RPKI-Router Cache Server Errors Table contains
counters of occurrences of errors on the connections (if any). The
RPKI Router
RPKI-Router Prefix Origin Table contains IP prefixes with their
minimum and maximum prefix lengths and the Origin Autonomous System
(AS). This data is the collective set of information received from
all RPKI cache servers that the router is connected with. The cache
servers are running the RPKI Router protocol. RPKI-Router Protocol.
Two notifications have been defined to inform a Network Management
Station (NMS) or operators about changes in the connection state of
the connections listed in the RPKI RPKI-Router Cache Server (Connection)
Table.
4. Definitions
The following MIB module imports definitions from [RFC2578],
[RFC2579], [RFC2580], [RFC4001], and [RFC2287]. That means we have a
normative reference to each of those documents.
The MIB module also has a normative reference to the RPKI Router
protocol RPKI-Router
Protocol [RFC6810]. Furthermore, for background and informative
information, the MIB module refers to [RFC1982], [RFC4252],
[RFC5246], and [RFC5925].
RPKI-RTR-MIB
RPKI-ROUTER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Unsigned32, mib-2, Gauge32, Counter32
FROM SNMPv2-SMI -- RFC 2578
InetAddressType, InetAddress, InetPortNumber,
InetAddressPrefixLength, InetAutonomousSystemNumber
FROM INET-ADDRESS-MIB -- RFC 4001
TEXTUAL-CONVENTION, TimeStamp
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
LongUtf8String FROM SYSAPPL-MIB -- RFC 2287
;
rpkiRouter
rpkiRtrMIB MODULE-IDENTITY
LAST-UPDATED "201305010000Z"
ORGANIZATION "IETF Secure Inter-Domain Routing (SIDR)
Working Group
"
CONTACT-INFO "Working Group Email: sidr@ietf.org
Randy Bush
Internet Initiative Japan
5147 Crystal Springs
Bainbridge Island, WA 98110
USA
Email: randy@psg.com
Bert Wijnen
RIPE NCC
Schagen 33
3461 GL Linschoten
Netherlands
Email: bertietf@bwijnen.net
Keyur Patel
Cisco Systems
170 W. Tasman Drive
San Jose, CA 95134
USA
Email: keyupate@cisco.com
Michael Baer
SPARTA
P.O. Box 72682
Davis, CA 95617
USA
Email: baerm@tislabs.com
"
DESCRIPTION "This MIB module contains management objects to
support monitoring of the Resource Public Key
Infrastructure (RPKI) protocol on routers.
Copyright (c) 2013 IETF Trust and the persons
identified as authors of the code. All rights
reserved.
Redistribution and use in source and binary
forms, with or without modification, is
permitted pursuant to, and subject to the
license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF
Trust's Legal Provisions Relating to IETF
Documents
(http://trustee.ietf.org/license-info).
This version of this MIB module is part of
RFC 6945; see the RFC itself for full legal
notices."
REVISION "201305010000Z"
DESCRIPTION "Initial version, published as RFC 6945."
::= { mib-2 218 }
rpkiRtrNotifications OBJECT IDENTIFIER ::= { rpkiRouter rpkiRtrMIB 0 }
rpkiRtrObjects OBJECT IDENTIFIER ::= { rpkiRouter rpkiRtrMIB 1 }
rpkiRtrConformance OBJECT IDENTIFIER ::= { rpkiRouter rpkiRtrMIB 2 }
-- ==============================================================
-- Textual Conventions used in this MIB module
-- ==============================================================
RpkiRtrConnectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The connection type used between a router (as a
client) and a cache server.
The following types have been defined in RFC 6810:
ssh(1) - Section 7.1; see also RFC 4252.
tls(2) - Section 7.2; see also RFC 5246.
tcpMD5(3) - Section 7.3; see also RFC 2385.
tcpAO(4) - Section 7.4; see also RFC 5925.
tcp(5) - Section 7.
ipsec(6) - Section 7; see also RFC 4301.
other(7) - none of the above."
REFERENCE "The RPKI-Router Protocol, RFC 6810, Section 7"
SYNTAX INTEGER {
ssh(1),
tls(2),
tcpMD5(3),
tcpAO(4),
tcp(5),
ipsec(6),
other(7)
}
-- ==============================================================
-- Scalar objects
-- ==============================================================
rpkiRtrDiscontinuityTimer OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This timer represents the timestamp (value
of sysUpTime) at which time any of the
Counter32 objects in this MIB module
encountered a discontinuity.
For objects that use rpkiRtrDiscontinuityTimer to
indicate discontinuity, only values received since
the time indicated by rpkiRtrDiscontinuityTimer are
comparable to each other. A manager should take the
possibility of rollover into account when
calculating difference values.
In principle, that should only happen if the
SNMP agent or the instrumentation for this
MIB module starts or restarts."
::= { rpkiRtrObjects 1 }
-- ==============================================================
-- RPKI Router RPKI-Router Cache Server Connection Table
-- ==============================================================
rpkiRtrCacheServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RpkiRtrCacheServerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the RPKI cache servers
known to this router/system."
::= { rpkiRtrObjects 2 }
rpkiRtrCacheServerTableEntry OBJECT-TYPE
SYNTAX RpkiRtrCacheServerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the rpkiRtrCacheServerTable.
It holds management attributes associated
with one connection to a RPKI cache server.
Implementers should be aware that if the
rpkiRtrCacheServerRemoteAddress object exceeds 114
octets, the index values will exceed the 128
sub-identifier limit and cannot be accessed using
SNMPv1, SNMPv2c, or SNMPv3."
INDEX { rpkiRtrCacheServerRemoteAddressType,
rpkiRtrCacheServerRemoteAddress,
rpkiRtrCacheServerRemotePort
}
::= { rpkiRtrCacheServerTable 1 }
RpkiRtrCacheServerTableEntry ::= SEQUENCE {
rpkiRtrCacheServerRemoteAddressType InetAddressType,
rpkiRtrCacheServerRemoteAddress InetAddress,
rpkiRtrCacheServerRemotePort InetPortNumber,
rpkiRtrCacheServerLocalAddressType InetAddressType,
rpkiRtrCacheServerLocalAddress InetAddress,
rpkiRtrCacheServerLocalPort InetPortNumber,
rpkiRtrCacheServerPreference Unsigned32,
rpkiRtrCacheServerConnectionType RpkiRtrConnectionType,
rpkiRtrCacheServerConnectionStatus INTEGER,
rpkiRtrCacheServerDescription LongUtf8String,
rpkiRtrCacheServerMsgsReceived Counter32,
rpkiRtrCacheServerMsgsSent Counter32,
rpkiRtrCacheServerV4ActiveRecords Gauge32,
rpkiRtrCacheServerV4Announcements Counter32,
rpkiRtrCacheServerV4Withdrawals Counter32,
rpkiRtrCacheServerV6ActiveRecords Gauge32,
rpkiRtrCacheServerV6Announcements Counter32,
rpkiRtrCacheServerV6Withdrawals Counter32,
rpkiRtrCacheServerLatestSerial Unsigned32,
rpkiRtrCacheServerSessionID Unsigned32,
rpkiRtrCacheServerRefreshTimer Unsigned32,
rpkiRtrCacheServerTimeToRefresh Integer32,
rpkiRtrCacheServerId Unsigned32
}
rpkiRtrCacheServerRemoteAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The network address type of the connection
to this RPKI cache server.
Note: Only IPv4, IPv6, and DNS support are required
for read-only compliance with RFC 6945."
::= { rpkiRtrCacheServerTableEntry 1 }
rpkiRtrCacheServerRemoteAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The remote network address for this connection
to this RPKI cache server.
The format of the address is defined by the
value of the corresponding instance of
rpkiRtrCacheServerRemoteAddressType.
This object matches the address type used within
the local router configuration. If the address is
of type dns (fqdn), then the router will resolve it
at the time it connects to the cache server."
::= { rpkiRtrCacheServerTableEntry 2 }
rpkiRtrCacheServerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The remote port number for this connection
to this RPKI cache server."
::= { rpkiRtrCacheServerTableEntry 3 }
rpkiRtrCacheServerLocalAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The network address type of the connection
to this RPKI cache server.
Note: Only IPv4, IPv6, and DNS support are required
for read-only compliance with RFC 6945."
::= { rpkiRtrCacheServerTableEntry 4 }
rpkiRtrCacheServerLocalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local network address for this connection
to this RPKI cache server.
The format of the address is defined by the
value of the corresponding instance of
rpkiRtrCacheServerLocalAddressType.
This object matches the address type used within
the local router configuration. If the address is
of type dns (fqdn), then the router will resolve it
at the time it connects to the cache server."
::= { rpkiRtrCacheServerTableEntry 5 }
rpkiRtrCacheServerLocalPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local port number for this connection
to this RPKI cache server."
::= { rpkiRtrCacheServerTableEntry 6 }
rpkiRtrCacheServerPreference OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The routers' preference for this RPKI cache server.
A lower value means more preferred. If two entries
have the same preference, then the order is
arbitrary.
In two cases, the maximum value for an Unsigned32
object should be returned for this object:
- If no order is specified in the RPKI Router RPKI-Router
configuration.
- If a preference value is configured that is
larger than the max value for an Unsigned32
object."
REFERENCE "The RPKI-Router Protocol, RFC 6810, Section 8."
DEFVAL { 4294967295 }
::= { rpkiRtrCacheServerTableEntry 7 }
rpkiRtrCacheServerConnectionType OBJECT-TYPE
SYNTAX RpkiRtrConnectionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The connection type or transport security suite
in use for this RPKI cache server."
::= { rpkiRtrCacheServerTableEntry 8 }
rpkiRtrCacheServerConnectionStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The connection status for this entry
(connection to this RPKI cache server)."
::= { rpkiRtrCacheServerTableEntry 9 }
rpkiRtrCacheServerDescription OBJECT-TYPE
SYNTAX LongUtf8String
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Free form description/information for this
connection to this RPKI cache server."
::= { rpkiRtrCacheServerTableEntry 10 }
rpkiRtrCacheServerMsgsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of messages received from this
RPKI cache server via this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerTableEntry 11 }
rpkiRtrCacheServerMsgsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of messages sent to this
RPKI cache server via this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerTableEntry 12 }
rpkiRtrCacheServerV4ActiveRecords OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of active IPv4 records received from
this RPKI cache server via this connection."
::= { rpkiRtrCacheServerTableEntry 13 }
rpkiRtrCacheServerV4Announcements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of IPv4 records announced by the
RPKI cache server via this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerTableEntry 14 }
rpkiRtrCacheServerV4Withdrawals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of IPv4 records withdrawn by the
RPKI cache server via this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerTableEntry 15 }
rpkiRtrCacheServerV6ActiveRecords OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of active IPv6 records received from
this RPKI cache server via this connection."
::= { rpkiRtrCacheServerTableEntry 16 }
rpkiRtrCacheServerV6Announcements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of IPv6 records announced by the
RPKI cache server via this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerTableEntry 17 }
rpkiRtrCacheServerV6Withdrawals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of IPv6 records withdrawn by the
RPKI cache server via this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerTableEntry 18 }
rpkiRtrCacheServerLatestSerial OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The latest serial number of data received from
this RPKI server on this connection.
Note: this value wraps back to zero when it
reaches its maximum value."
REFERENCE "RFC 1982 and RFC 6810, Section 2"
::= { rpkiRtrCacheServerTableEntry 19 }
rpkiRtrCacheServerSessionID OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Session ID associated with the RPKI cache
server at the other end of this connection."
REFERENCE "RFC 6810, Section 2"
::= { rpkiRtrCacheServerTableEntry 20 }
rpkiRtrCacheServerRefreshTimer OBJECT-TYPE
SYNTAX Unsigned32 (60..7200)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of seconds configured for the refresh
timer for this connection to this RPKI cache
server."
REFERENCE "RFC 6810, Sections 6.1 and 8"
::= { rpkiRtrCacheServerTableEntry 21 }
rpkiRtrCacheServerTimeToRefresh OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of seconds remaining before a new
refresh is performed via a Serial Query to
this cache server over this connection.
A negative value means that the refresh time has
passed this many seconds and the refresh has not
yet been completed. It will stop decrementing at
the maximum negative value.
Upon a completed refresh (i.e., a successful
and complete response to a Serial Query) the
value of this attribute will be reinitialized
with the value of the corresponding
rpkiRtrCacheServerRefreshTimer attribute."
REFERENCE "RFC 6810, Section 8"
::= { rpkiRtrCacheServerTableEntry 22 }
rpkiRtrCacheServerId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unique ID for this connection.
An implementation must make sure this ID is unique
within this table. It is this ID that can be used
to find entries in the rpkiRtrPrefixOriginTable
that were created by announcements received on
this connection from this cache server."
REFERENCE "RFC 6810, Section 4"
::= { rpkiRtrCacheServerTableEntry 23 }
-- ==============================================================
-- Errors Table
-- ==============================================================
rpkiRtrCacheServerErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RpkiRtrCacheServerErrorsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table provides statistics on errors per
RPKI peer connection. These can be used for
debugging."
::= { rpkiRtrObjects 3 }
rpkiRtrCacheServerErrorsTableEntry OBJECT-TYPE
SYNTAX RpkiRtrCacheServerErrorsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the rpkiCacheServerErrorTable. It
holds management objects associated with errors
codes that were received on the specified
connection to a specific cache server."
REFERENCE "RFC 6810, Section 10"
AUGMENTS { rpkiRtrCacheServerTableEntry }
::= { rpkiRtrCacheServerErrorsTable 1 }
RpkiRtrCacheServerErrorsTableEntry ::= SEQUENCE {
rpkiRtrCacheServerErrorsCorruptData Counter32,
rpkiRtrCacheServerErrorsInternalError Counter32,
rpkiRtrCacheServerErrorsNoData Counter32,
rpkiRtrCacheServerErrorsInvalidRequest Counter32,
rpkiRtrCacheServerErrorsUnsupportedVersion Counter32,
rpkiRtrCacheServerErrorsUnsupportedPdu Counter32,
rpkiRtrCacheServerErrorsWithdrawalUnknown Counter32,
rpkiRtrCacheServerErrorsDuplicateAnnounce Counter32
}
rpkiRtrCacheServerErrorsCorruptData OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Corrupt Data' errors received
from the RPKI cache server at the other end
of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 1 }
rpkiRtrCacheServerErrorsInternalError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Internal Error' errors received
from the RPKI cache server at the other end
of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 2 }
rpkiRtrCacheServerErrorsNoData OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'No Data Available' errors received
from the RPKI cache server at the other end
of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 3 }
rpkiRtrCacheServerErrorsInvalidRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Invalid Request' errors received
from the RPKI cache server at the other end
of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 4 }
rpkiRtrCacheServerErrorsUnsupportedVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Unsupported Protocol Version'
errors received from the RPKI cache server at
the other end of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 5 }
rpkiRtrCacheServerErrorsUnsupportedPdu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Unsupported PDU Type' errors
received from the RPKI cache server at the
other end of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 6 }
rpkiRtrCacheServerErrorsWithdrawalUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Withdrawal of Unknown Record'
errors received from the RPKI cache server at
the other end of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 7 }
rpkiRtrCacheServerErrorsDuplicateAnnounce OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of 'Duplicate Announcement Received'
errors received from the RPKI cache server at
the other end of this connection.
Discontinuities are indicated by the value
of rpkiRtrDiscontinuityTimer."
::= { rpkiRtrCacheServerErrorsTableEntry 8 }
-- ==============================================================
-- The rpkiRtrPrefixOriginTable
-- ==============================================================
rpkiRtrPrefixOriginTable OBJECT-TYPE
SYNTAX SEQUENCE OF RpkiRtrPrefixOriginTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the prefixes that were
announced by RPKI cache servers to this system.
That is the prefixes and their Origin Autonomous
System Number (ASN) as received by announcements
via the RPKI-Router Protocol."
::= { rpkiRtrObjects 4 }
rpkiRtrPrefixOriginTableEntry OBJECT-TYPE
SYNTAX RpkiRtrPrefixOriginTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the rpkiRtrPrefixOriginTable. This
represents one announced prefix. If a cache server
is removed from the local configuration, any table
rows associated with that server (indicated by
rpkiRtrPrefixOriginCacheServerId) are also removed
from this table.
Implementers should be aware that if the
rpkiRtrPrefixOriginAddress object exceeds 111
octets, the index values will exceed the 128
sub-identifier limit and cannot be accessed using
SNMPv1, SNMPv2c, or SNMPv3."
INDEX { rpkiRtrPrefixOriginAddressType,
rpkiRtrPrefixOriginAddress,
rpkiRtrPrefixOriginMinLength,
rpkiRtrPrefixOriginMaxLength,
rpkiRtrPrefixOriginASN,
rpkiRtrPrefixOriginCacheServerId
}
::= { rpkiRtrPrefixOriginTable 1 }
RpkiRtrPrefixOriginTableEntry ::= SEQUENCE {
rpkiRtrPrefixOriginAddressType InetAddressType,
rpkiRtrPrefixOriginAddress InetAddress,
rpkiRtrPrefixOriginMinLength InetAddressPrefixLength,
rpkiRtrPrefixOriginMaxLength InetAddressPrefixLength,
rpkiRtrPrefixOriginASN InetAutonomousSystemNumber,
rpkiRtrPrefixOriginCacheServerId Unsigned32
}
rpkiRtrPrefixOriginAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The network address type for this prefix.
Note: Only IPv4 and IPv6 support are required
for read-only compliance with RFC 6945."
::= { rpkiRtrPrefixOriginTableEntry 1 }
rpkiRtrPrefixOriginAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The network address for this prefix.
The format of the address is defined by the
value of the corresponding instance of
rpkiRtrPrefixOriginAddressType."
::= { rpkiRtrPrefixOriginTableEntry 2 }
rpkiRtrPrefixOriginMinLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The minimum prefix length allowed for this prefix."
::= { rpkiRtrPrefixOriginTableEntry 3 }
rpkiRtrPrefixOriginMaxLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The maximum prefix length allowed for this prefix.
Note, this value must be greater or equal to the
value of rpkiRtrPrefixOriginMinLength."
::= { rpkiRtrPrefixOriginTableEntry 4 }
rpkiRtrPrefixOriginASN OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ASN that is authorized to announce the
prefix or sub-prefixes covered by this entry."
::= { rpkiRtrPrefixOriginTableEntry 5 }
rpkiRtrPrefixOriginCacheServerId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unique ID of the connection to the cache
server from which this announcement was received.
That connection is identified/found by a matching
value in attribute rpkiRtrCacheServerId."
::= { rpkiRtrPrefixOriginTableEntry 6 }
-- ==============================================================
-- Notifications
-- ==============================================================
rpkiRtrCacheServerConnectionStateChange NOTIFICATION-TYPE
OBJECTS { rpkiRtrCacheServerConnectionStatus,
rpkiRtrCacheServerLatestSerial,
rpkiRtrCacheServerSessionID
}
STATUS current
DESCRIPTION "This notification signals a change in the status
of an rpkiRtrCacheServerConnection.
The management agent MUST throttle the generation of
consecutive rpkiRtrCacheServerConnectionStateChange
notifications such that there is at least a 5 second
gap between them.
If more than one notification has occurred locally
during that time, the most recent notification is
sent at the end of the 5 second gap and the others
are discarded."
::= { rpkiRtrNotifications 1 }
rpkiRtrCacheServerConnectionToGoStale NOTIFICATION-TYPE
OBJECTS { rpkiRtrCacheServerV4ActiveRecords,
rpkiRtrCacheServerV6ActiveRecords,
rpkiRtrCacheServerLatestSerial,
rpkiRtrCacheServerSessionID,
rpkiRtrCacheServerRefreshTimer,
rpkiRtrCacheServerTimeToRefresh
}
STATUS current
DESCRIPTION "This notification signals that an RPKI cache
server connection is about to go stale.
It is suggested that this notification is
generated when the value of the
rpkiRtrCacheServerTimeToRefresh attribute
goes below 60 seconds.
The SNMP agent MUST throttle the generation of
consecutive rpkiRtrCacheServerConnectionToGoStale
notifications such that there is at least a
5 second gap between them.
"
::= { rpkiRtrNotifications 2 }
-- ==============================================================
-- Module Compliance information
-- ==============================================================
rpkiRtrCompliances OBJECT IDENTIFIER ::=
{rpkiRtrConformance 1}
rpkiRtrGroups OBJECT IDENTIFIER ::=
{rpkiRtrConformance 2}
rpkiRtrRFC6945ReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the rpkiRouter rpkiRtrMIB module. There
are only read-only objects in this MIB module, so the
'ReadOnly' in the name of this compliance statement is there
only for clarity and truth in advertising.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2, but for
which there are compliance requirements. Those requirements
and similar requirements for related objects are expressed
below, in pseudo-OBJECT clause form, in this description:
-- OBJECT rpkiRtrCacheServerRemoteAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2), dns(16) }
-- DESCRIPTION
-- The MIB requires support for the IPv4, IPv6, and DNS
-- InetAddressTypes for this object.
-- OBJECT rpkiRtrCacheServerLocalAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2), dns(16) }
-- DESCRIPTION
-- The MIB requires support for the IPv4, IPv6, and DNS
-- InetAddressTypes for this object.
-- OBJECT rpkiRtrPrefixOriginAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
-- DESCRIPTION
-- The MIB requires support for the IPv4, and IPv6
-- InetAddressTypes for this object.
"
MODULE -- This module
MANDATORY-GROUPS { rpkiRtrCacheServerGroup,
rpkiRtrPrefixOriginGroup,
rpkiRtrNotificationsGroup
}
GROUP rpkiRtrCacheServerErrorsGroup
DESCRIPTION "Implementation of this group is optional and
would be useful for debugging."
::= { rpkiRtrCompliances 1 }
rpkiRtrCacheServerGroup OBJECT-GROUP
OBJECTS {
rpkiRtrDiscontinuityTimer,
rpkiRtrCacheServerLocalAddressType,
rpkiRtrCacheServerLocalAddress,
rpkiRtrCacheServerLocalPort,
rpkiRtrCacheServerPreference,
rpkiRtrCacheServerConnectionType,
rpkiRtrCacheServerConnectionStatus,
rpkiRtrCacheServerDescription,
rpkiRtrCacheServerMsgsReceived,
rpkiRtrCacheServerMsgsSent,
rpkiRtrCacheServerV4ActiveRecords,
rpkiRtrCacheServerV4Announcements,
rpkiRtrCacheServerV4Withdrawals,
rpkiRtrCacheServerV6ActiveRecords,
rpkiRtrCacheServerV6Announcements,
rpkiRtrCacheServerV6Withdrawals,
rpkiRtrCacheServerLatestSerial,
rpkiRtrCacheServerSessionID,
rpkiRtrCacheServerRefreshTimer,
rpkiRtrCacheServerTimeToRefresh,
rpkiRtrCacheServerId
}
STATUS current
DESCRIPTION "The collection of objects to monitor the RPKI peer
connections."
::= { rpkiRtrGroups 1 }
rpkiRtrCacheServerErrorsGroup OBJECT-GROUP
OBJECTS {
rpkiRtrCacheServerErrorsCorruptData,
rpkiRtrCacheServerErrorsInternalError,
rpkiRtrCacheServerErrorsNoData,
rpkiRtrCacheServerErrorsInvalidRequest,
rpkiRtrCacheServerErrorsUnsupportedVersion,
rpkiRtrCacheServerErrorsUnsupportedPdu,
rpkiRtrCacheServerErrorsWithdrawalUnknown,
rpkiRtrCacheServerErrorsDuplicateAnnounce
}
STATUS current
DESCRIPTION "The collection of objects that may help in
debugging the communication between RPKI
clients and cache servers."
::= { rpkiRtrGroups 2 }
rpkiRtrPrefixOriginGroup OBJECT-GROUP
OBJECTS {
rpkiRtrPrefixOriginCacheServerId
}
STATUS current
DESCRIPTION "The collection of objects that represent
the prefix(es) and their validated Origin
ASes."
::= { rpkiRtrGroups 3 }
rpkiRtrNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { rpkiRtrCacheServerConnectionStateChange,
rpkiRtrCacheServerConnectionToGoStale
}
STATUS current
DESCRIPTION "The set of notifications to alert an NMS of change
in connections to RPKI cache servers."
::= { rpkiRtrGroups 4 }
END
5. IANA Considerations
IANA has assigned the MIB module in this document the following
OBJECT IDENTIFIER within the SMI Numbers registry.
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
rpkiRouter
rpkiRtrMIB { mib-2 218 }
6. Security Considerations
There are no management objects defined in this MIB module that have
a MAX-ACCESS clause of read-write and/or read-create. So, if this
MIB module is implemented correctly, then there is no risk that an
intruder can alter or create any management objects of this MIB
module via direct SNMP SET operations.
Most of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. They are vulnerable in the
sense that when an intruder sees the information in this MIB module,
then it might help him/her to set up an attack on the router or cache
server. It is thus important to control even GET and/or NOTIFY
access to these objects and possibly to even encrypt the values of
these objects when sending them over the network via SNMP.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
there is no control as to who on the secure network is allowed to
access and GET/SET (read/change/create/delete) the objects in this
MIB module.
Implementations MUST provide the security features described by the
SNMPv3 framework (see [RFC3410]), including full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
7. References
7.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2287] Krupczak, C. and J. Saperia, "Definitions of System-Level
Managed Objects for Applications", RFC 2287, February
1998.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD
58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC6810] Bush, R. and R. Austein, "The Resource Public Key
Infrastructure (RPKI) to Router Protocol", RFC 6810,
January 2013.
7.2. Informative References
[RFC1982] Elz, R. and R. Bush, "Serial Number Arithmetic", RFC 1982,
August 1996.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826, June 2004.
[RFC4252] Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
Authentication Protocol", RFC 4252, January 2006.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008.
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)", RFC
5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
[RFC5925] Touch, J., Mankin, A., and R. Bonica, "The TCP
Authentication Option", RFC 5925, June 2010.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
RFC 6353, July 2011.
Authors' Addresses
Randy Bush
Internet Initiative Japan
5147 Crystal Springs
Bainbridge Island, WA 98110
US
EMail: randy@psg.com
Bert Wijnen
RIPE NCC
Schagen 33
3461 GL Linschoten
Netherlands
EMail: bertietf@bwijnen.net
Keyur Patel
Cisco Systems
170 W. Tasman Drive
San Jose, CA 95134
USA
EMail: keyupate@cisco.com
Michael Baer
SPARTA
P.O. Box 72682
Davis, CA 95617
USA
EMail: baerm@tislabs.com