Network Working GroupInternet Engineering Task Force (IETF) J. GouldInternet-DraftRequest for Comments: 8495 VeriSign, Inc.Intended status:Category: Standards Track K. FeherExpires: April 7, 2019ISSN: 2070-1721 NeustarOctober 04,November 2018 Allocation Token Extension for the Extensible Provisioning Protocol (EPP)draft-ietf-regext-allocation-token-12Abstract This document describes an Extensible Provisioning Protocol (EPP) extension for including an Allocation Token in "query" and "transform" commands. The Allocation Token is used as a credential that authorizes a client to request the allocation of a specific object from theserver,server using one of the EPP transformcommandscommands, includingcreate"create" andtransfer."transfer". Status of This Memo ThisInternet-Draftissubmitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documentsan Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF).Note that other groups may also distribute working documents as Internet-Drafts. The listIt represents the consensus ofcurrent Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents validthe IETF community. It has received public review and has been approved fora maximumpublication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 ofsix monthsRFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may beupdated, replaced, or obsoleted by other documentsobtained atany time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on April 7, 2019.https://www.rfc-editor.org/info/rfc8495. Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . .32 1.1. Conventions Used in This Document . . . . . . . . . . . . 3 2. Object Attributes . . . . . . . . . . . . . . . . . . . . . .43 2.1. Allocation Token . . . . . . . . . . . . . . . . . . . . 4 3. EPP Command Mapping . . . . . . . . . . . . . . . . . . . . .54 3.1. EPP Query Commands . . . . . . . . . . . . . . . . . . .54 3.1.1. EPP <check> Command . . . . . . . . . . . . . . . . .54 3.1.2. EPP <info> Command . . . . . . . . . . . . . . . . .98 3.1.3. EPP <transfer> Query Command . . . . . . . . . . . .1110 3.2. EPP Transform Commands . . . . . . . . . . . . . . . . .1211 3.2.1. EPP <create> Command . . . . . . . . . . . . . . . .1211 3.2.2. EPP <delete> Command . . . . . . . . . . . . . . . .1312 3.2.3. EPP <renew> Command . . . . . . . . . . . . . . . . .1312 3.2.4. EPP <transfer> Command . . . . . . . . . . . . . . .1312 3.2.5. EPP <update> Command . . . . . . . . . . . . . . . .1413 4. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .1514 4.1. Allocation Token Extension Schema . . . . . . . . . . . .1514 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . .1615 5.1. XML Namespace . . . . . . . . . . . . . . . . . . . . . .1615 5.2. EPP Extension Registry . . . . . . . . . . . . . . . . .1615 6.Implementation Status . . . . . . . . . . . . . . . . . . . . 16 6.1. Verisign EPP SDK . . . . . . . . . . . . . . . . . . . . 17 6.2. Neustar EPP SDK . . . . . . . . . . . . . . . . . . . . . 17 6.3. Neustar gTLD SRS . . . . . . . . . . . . . . . . . . . . 18 6.4. Net::DRI . . . . .Security Considerations . . . . . . . . . . . . . . . . . . .1815 7.Security Considerations . . . . . . . . . . . . . . . .References . . .19 8. Acknowledgements. . . . . . . . . . . . . . . . . . . . . .19 9.16 7.1. Normative References . . . . . . . . . . . . . . . . . . 16 7.2. Informative References . . . . . . .19 9.1. Normative References .. . . . . . . . . . 17 Acknowledgements . . . . . . .19 9.2. Informative References. . . . . . . . . . . . . . . . .2017 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . .2617 1. Introduction This document describes an extension mapping for version 1.0 of the Extensible Provisioning Protocol (EPP) [RFC5730]. This mapping, which is an extension to EPP object mappingslikesimilar to the EPP domain name mapping [RFC5731], supports passing an Allocation Token as a credential that authorizes a client to request the allocation of a specific object from theserver,server using one of the EPP transformcommandscommands, includingcreate"create" andtransfer."transfer". Allocation is when a server assigns the sponsoring client of an object based on the use of an Allocation Token credential. Examples include allocating a registration based on a pre-eligibility Allocation Token, allocating a premium domain name registration based on an auction Allocation Token, allocating a registration based on a founders Allocation Token, and allocating an existing domain name held by the server or by a different sponsoring client based on an Allocation Token that is passed with a transfer command. Clients pass an Allocation Token to the server for validation, and the server determines if the supplied Allocation Token is one supported by the server. It is up to server policy which EPP transform commands and which objects require the Allocation Token. The Allocation Token MAY be returned to an authorized client for passing out-of-band to a client that uses it with an EPP transform command. 1.1. Conventions Used in This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. XML is case sensitive. Unless stated otherwise, XML specifications and examples provided in this document MUST be interpreted in the character case presented in order to develop a conforming implementation. In examples, "C:" represents lines sent by a protocol client and "S:" represents lines returned by a protocol server. Indentation and white space in the examples are provided only to illustrate element relationships and are not REQUIRED in the protocol. The XML namespace prefix "allocationToken" is used for the namespace "urn:ietf:params:xml:ns:allocationToken-1.0", but implementations MUST NOT depend on it and instead employ a proper namespace-aware XML parser and serializer to interpret and output the XML documents. The "abc123" token value is used as a placeholder value in the examples. The server MUST support token values that follow the Security Considerations (Section7) section.6). Thedomain objectdomain-object attribute values, including the "2fooBAR" <domain:pw> value, in the examples are provided for illustration purposes only. Refer to [RFC5731] for details on thedomain objectdomain-object attributes. 2. Object Attributes This extension adds additional elements to EPP object mappingslikesimilar to the EPP domain name mapping [RFC5731]. Only those new elements are described here. 2.1. Allocation Token The Allocation Token is a simple XML "token" type. The exact format of the Allocation Token is up to server policy. The server MAY have the Allocation Token for each object to match against the Allocation Token passed by the client to authorize the allocation of the object. The <allocationToken:allocationToken> element is used for all of the supported EPP commands as well as the info response. If the supplied Allocation Token passed to the server does not apply to the object, the server MUST return an EPP error result code of 2201. Authorization information,likesimilar to what is defined in the EPP domain name mapping [RFC5731], is associated with objects to facilitate transfer operations. The authorization information is assigned when an object is created. The Allocation Token and the authorization information are bothcredentials,credentials but are used for different purposes andusedin different ways. The Allocation Token is used to facilitate the allocation of an object instead of transferring the sponsorship of the object. The Allocation Token is not managed by theclient,client but is validated by the server to authorize assigning the initial sponsoring client of the object. An example <allocationToken:allocationToken> element with value of "abc123": <allocationToken:allocationToken xmlns:allocationToken= "urn:ietf:params:xml:ns:allocationToken-1.0"> abc123 </allocationToken:allocationToken> 3. EPP Command Mapping A detailed description of the EPP syntax and semantics can be found in the EPP core protocol specification [RFC5730]. 3.1. EPP Query Commands EPP provides three commands to retrieve object information: <check> to determine if an object can be provisioned, <info> to retrieve information associated with an object, and <transfer> to retrieveobject transferobject-transfer status information. 3.1.1. EPP <check> Command This extension defines additional elements to extend the EPP <check> command of an object mappinglikesimilar to the mapping specified in [RFC5731]. This extension allows clients to check the availability of an object with an Allocation Token, as described in Section 2.1. Clients can check if an object can be created using the Allocation Token. The Allocation Token is applied to all object names included in the EPP <check> command.ExampleThe following is an example <check> command for the allocation.example domain name using the <allocationToken:allocationToken> extension with the allocation token of 'abc123': C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <check> C: <domain:check C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>allocation.example</domain:name> C: </domain:check> C: </check> C: <extension> C: <allocationToken:allocationToken C: xmlns:allocationToken= C: "urn:ietf:params:xml:ns:allocationToken-1.0"> C: abc123 C: </allocationToken:allocationToken> C: </extension> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> If the query was successful, the server replies with a <check> response providing the availability status of the queried object based on the following Allocation Tokencases,cases where the object is otherwise available: 1. If an object requires an Allocation Token and the Allocation Token does apply to the object, then the server MUST return the availability status as available (e.g., the "avail" attribute is "1" or "true"). 2. If an object requires an Allocation Token and the Allocation Token does not apply to the object, then the server SHOULD return the availability status as unavailable (e.g., the "avail" attribute is "0" or "false"). 3. If an object does not require an Allocation Token, the server MAY return the availability status as available (e.g., the "avail" attribute is "1" or "true").ExampleThe following is an example <check> domain response for a <check> command using the <allocationToken:allocationToken> extension: S:<?xml version="1.0" encoding="UTF-8"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> S: <response> S: <result code="1000"> S: <msg lang="en-US">Command completed successfully</msg> S: </result> S: <resData> S: <domain:chkData S: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> S: <domain:cd> S: <domain:name avail="1">allocation.example</domain:name> S: </domain:cd> S: </domain:chkData> S: </resData> S: <trID> S: <clTRID>ABC-DEF-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp>ExampleThe following is an example <check> command with the <allocationToken:allocationToken> extension for the allocation.example and allocation2.example domain names. Availability of allocation.example and allocation2.example domain names are based on the Allocation Token 'abc123': C:<?xml version="1.0" encoding="UTF-8"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <check> C: <domain:check C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>allocation.example</domain:name> C: <domain:name>allocation2.example</domain:name> C: </domain:check> C: </check> C: <extension> C: <allocationToken:allocationToken C: xmlns:allocationToken= C: "urn:ietf:params:xml:ns:allocationToken-1.0"> C: abc123 C: </allocationToken:allocationToken> C: </extension> C: <clTRID>ABC-DEF-12345</clTRID> C: </command> C:</epp>ExampleThe following is an example <check> domain response for multiple domain names in the <check> command using the <allocationToken:allocationToken> extension, where the Allocation Token 'abc123' matches allocation.example but does not match allocation2.example: S:<?xml version="1.0" encoding="UTF-8"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> S: <response> S: <result code="1000"> S: <msg lang="en-US">Command completed successfully</msg> S: </result> S: <resData> S: <domain:chkData S: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> S: <domain:cd> S: <domain:name avail="1">allocation.example</domain:name> S: </domain:cd> S: <domain:cd> S: <domain:name avail="0">allocation2.example</domain:name> S: <domain:reason>Allocation Token mismatch</domain:reason> S: </domain:cd> S: </domain:chkData> S: </resData> S: <trID> S: <clTRID>ABC-DEF-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp> This extension does not add any elements to the EPP <check> response described inthe[RFC5730]. 3.1.2. EPP <info> Command This extension defines additional elements to extend the EPP <info> command of an object mappinglikesimilar to the mapping specified in [RFC5731]. The EPP <info> command allows a client to request information associated with an existing object. Authorized clients MAY retrieve the Allocation Token (Section 2.1) along with the other object information by supplying the <allocationToken:info> element in the command. The <allocationToken:info> element is an empty element that serves as a marker to the server to return the <allocationToken:allocationToken> element in the info response. If the client is not authorized to receive the Allocation Token, the server MUST return an EPP error result code of 2201. If the client is authorized to receive the Allocation Token, but there is no Allocation Token associated with the object, the server MUST return an EPP error result code of 2303. The authorization is subject to server policy.ExampleThe following is an example <info> command with the allocationToken:info extension for the allocation.example domain name: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <info> C: <domain:info C:xmlns:domain="urn:ietf:params:xml:ns:domain-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:domain-1.0 C: domain-1.0.xsd">xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>allocation.example</domain:name> C: </domain:info> C: </info> C: <extension> C: <allocationToken:info C: xmlns:allocationToken= C:"urn:ietf:params:xml:ns:allocationToken-1.0/>"urn:ietf:params:xml:ns:allocationToken-1.0"/> C: </extension> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> If the query was successful, the server replies with an <allocationToken:allocationToken> element along with the regular EPP <resData>. The <allocationToken:allocationToken> element is described in Section 2.1.ExampleThe following is an example <info> domain response using the <allocationToken:allocationToken> extension: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> S: <domain:infData S: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> S: <domain:name>allocation.example</domain:name> S: <domain:roid>EXAMPLE1-REP</domain:roid> S: <domain:status s="pendingCreate"/> S: <domain:registrant>jd1234</domain:registrant> S: <domain:contact type="admin">sh8013</domain:contact> S: <domain:contact type="tech">sh8013</domain:contact> S: <domain:clID>ClientX</domain:clID> S: <domain:crID>ClientY</domain:crID> S: <domain:crDate>2012-04-03T22:00:00.0Z</domain:crDate> S: <domain:authInfo> S: <domain:pw>2fooBAR</domain:pw> S: </domain:authInfo> S: </domain:infData> S: </resData> S: <extension> S: <allocationToken:allocationToken S: xmlns:allocationToken= S: "urn:ietf:params:xml:ns:allocationToken-1.0"> S: abc123 S: </allocationToken:allocationToken> S: </extension> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp> 3.1.3. EPP <transfer> Query Command This extension does not add any elements to the EPP <transfer> query command or <transfer> query response described in [RFC5730]. 3.2. EPP Transform Commands EPP provides five commands to transform objects: <create> to create an instance of an object, <delete> to delete an instance of an object, <renew> to extend the validity period of an object, <transfer> to manage object sponsorship changes, and <update> to change information associated with an object. 3.2.1. EPP <create> Command This extension defines additional elements to extend the EPP <create> command of an object mappinglikesimilar to the mapping specified in [RFC5731]. The EPP <create> command provides a transform operation that allows a client to create an instance of an object. In addition to the EPP command elements described in an object mappinglikesimilar to the mapping specified in [RFC5731], the command MUST contain a child <allocationToken:allocationToken> element for the client to be authorized to create and allocate the object. If the Allocation Token does not apply to the object, the server MUST return an EPP error result code of 2201.ExampleThe following is an example <create> command to create a domain object with an Allocation Token: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <create> C: <domain:create C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>allocation.example</domain:name> C: <domain:registrant>jd1234</domain:registrant> C: <domain:contact type="admin">sh8013</domain:contact> C: <domain:contact type="tech">sh8013</domain:contact> C: <domain:authInfo> C: <domain:pw>2fooBAR</domain:pw> C: </domain:authInfo> C: </domain:create> C: </create> C: <extension> C: <allocationToken:allocationToken C: xmlns:allocationToken= C: "urn:ietf:params:xml:ns:allocationToken-1.0"> C: abc123 C: </allocationToken:allocationToken> C: </extension> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> This extension does not add any elements to the EPP <create> response described inthe[RFC5730]. 3.2.2. EPP <delete> Command This extension does not add any elements to the EPP <delete> command or <delete> response described inthe[RFC5730]. 3.2.3. EPP <renew> Command This extension does not add any elements to the EPP <renew> command or <renew> response described inthe[RFC5730]. 3.2.4. EPP <transfer> Command This extension defines additional elements to extend the EPP <transfer>requestcommand of an object mappinglikesimilar to the mapping specified in [RFC5731]. The EPP <transfer>requestcommand provides a transform operation that allows a client to request the transfer of an object. In addition to the EPP command elements described in an object mappinglikesimilar to the mapping specified in [RFC5731], the command MUST contain a child <allocationToken:allocationToken> element for the client to be authorized to transfer and allocate the object. The authorization associated with the Allocation Token is in additiontoto, and does notreplacereplace, the authorization mechanism defined for the object's <transfer>requestcommand. If the Allocation Token is invalid or not required for the object, the server MUST return an EPP error result code of 2201.ExampleThe following is an example <transfer>requestcommand to allocate the domain object with the Allocation Token: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <transfer op="request"> C: <domain:transfer C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example1.tld</domain:name> C: <domain:period unit="y">1</domain:period> C: <domain:authInfo> C: <domain:pw>2fooBAR</domain:pw> C: </domain:authInfo> C: </domain:transfer> C: </transfer> C: <extension> C: <allocationToken:allocationToken C: xmlns:allocationToken= C: "urn:ietf:params:xml:ns:allocationToken-1.0"> C: abc123 C: </allocationToken:allocationToken> C: </extension> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> This extension does not add any elements to the EPP <transfer> response described inthe[RFC5730]. 3.2.5. EPP <update> Command This extension does not add any elements to the EPP <update> command or <update> response described inthe[RFC5730]. 4. Formal Syntax One schema is presentedhere that ishere: the EPP Allocation Token Extension schema. The formal syntax presented here is a complete schema representation of the object mapping suitable for automated validation of EPP XML instances. The BEGIN and END tags are not part of the schema; they are used to note the beginning and ending of the schema for URI registration purposes. 4.1. Allocation Token Extension Schema BEGIN <?xml version="1.0" encoding="UTF-8"?> <schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:allocationToken="urn:ietf:params:xml:ns:allocationToken-1.0" targetNamespace="urn:ietf:params:xml:ns:allocationToken-1.0" elementFormDefault="qualified"> <annotation> <documentation> Extensible Provisioning Protocol v1.0 Allocation Token Extension </documentation> </annotation> <!-- Element used in info command to get allocation token. --> <element name="info"> <complexType> <complexContent> <restriction base="anyType" /> </complexContent> </complexType> </element> <!-- Allocation Token used in transform commands and info response --> <element name="allocationToken" type="allocationToken:allocationTokenType" /> <simpleType name="allocationTokenType"> <restriction base="token"> <minLength value="1" /> </restriction> </simpleType> <!-- End of schema. --> </schema> END 5. IANA Considerations 5.1. XML Namespace This document uses URNs to describe XML namespaces and XML schemas conforming to a registry mechanism described in [RFC3688].Registration request for theThe allocationTokennamespace:namespace has been registered as follows. URI: urn:ietf:params:xml:ns:allocationToken-1.0 Registrant Contact: IESG XML: None. Namespace URIs do not represent an XML specification.Registration request for theThe allocationToken XMLschema:schema has been registered as follows. URI: urn:ietf:params:xml:schema:allocationToken-1.0 Registrant Contact: IESG XML: See the "Formal Syntax" section of this document. 5.2. EPP Extension Registry The followingregistration ofentry has been added to theEPP Extension Registry,Extensions for the Extensible Provisioning Protocol (EPP) registry, as described in[RFC7451], is requested:[RFC7451]. Name of Extension:"AllocationAllocation Token Extension for the Extensible Provisioning Protocol(EPP)"(EPP) Documentstatus:Status: Standards Track Reference:(insert reference toRFCversion of this document) Registrant Name and Email Address: IESG,8495 Registrant: IESG <iesg@ietf.org> TLDs: Any IPR Disclosure: None Status: Active Notes: None7.6. Security Considerations The mapping described in this document does not provide any security services beyond those described by EPP [RFC5730] and protocol layers used by EPP. The security considerations described in these other specifications apply to this specification as well. The mapping acts as a conduit for the passing of Allocation Tokens between a client and a server. The definition of the Allocation Token SHOULD be defined outside of this mapping. The following are security considerations in the definition and use of an Allocation Token: 1. An Allocation Token should be considered secret information by theclient andclient; it SHOULD be protected at rest and MUST be protected in transit. 2. An Allocation Token should be single use, meaning it should be unique per object and per allocation operation. 3. An Allocation Token should have a limited life with some form of expiry in the AllocationTokenToken, if generated by a trusted3rdthird party, or with a server-sideexpiryexpiry, if generated by the server. 4. An Allocation Token should use a strong random value if it is based on an unsigned code. 5. An Allocation Token should leverage digital signatures to confirm its authenticity if generated by a trusted3rdthird party. 6. An Allocation Token that is signed XML should be encoded (e.g., base64 [RFC4648]) to mitigate server validation issues.9.7. References9.1.7.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004, <https://www.rfc-editor.org/info/rfc3688>. [RFC5730] Hollenbeck, S., "Extensible Provisioning Protocol (EPP)", STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009, <https://www.rfc-editor.org/info/rfc5730>. [RFC5731] Hollenbeck, S., "Extensible Provisioning Protocol (EPP) Domain Name Mapping", STD 69, RFC 5731, DOI 10.17487/RFC5731, August 2009, <https://www.rfc-editor.org/info/rfc5731>.[RFC7942] Sheffer, Y. and A. Farrel, "Improving Awareness[RFC8174] Leiba, B., "Ambiguity ofRunning Code: The Implementation Status Section",Uppercase vs Lowercase in RFC 2119 Key Words", BCP205,14, RFC7942,8174, DOI10.17487/RFC7942, July 2016, <https://www.rfc-editor.org/info/rfc7942>. 9.2.10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. 7.2. Informative References [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, <https://www.rfc-editor.org/info/rfc4648>. [RFC7451] Hollenbeck, S., "Extension Registry for the Extensible Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451, February 2015, <https://www.rfc-editor.org/info/rfc7451>.[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. 8.Acknowledgements The authors wish to acknowledge the original concept for thisdraftdocument and the efforts in the initial draft versions of thisdraftdocument by Trung Tran and Sharon Wodjenski. Special suggestions that have been incorporated into this document were provided by Ben Campbell, Scott Hollenbeck, Benjamin Kaduk, Mirja Kuehlewind, Rubens Kuhl, Alexander Mayrhofer, Patrick Mevzek, Eric Rescoria, and Adam Roach. Authors' Addresses James Gould VeriSign, Inc. 12061 Bluemont Way Reston, VA 20190USUnited States of America Email: jgould@verisign.com URI:http://www.verisigninc.comhttp://www.verisign.com Kal Feher Neustar lvl 8/10 Queens Road Melbourne, VIC 3004AUAustralia Email: ietf@feherfamily.org URI: http://www.neustar.biz