Internet Engineering Task Force (IETF) D. Benjamin Request for Comments: 8701 Google LLC Category: InformationalDecember 2019January 2020 ISSN: 2070-1721 Applying Generate Random Extensions And Sustain Extensibility (GREASE) to TLS Extensibility Abstract This document describes GREASE (Generate Random Extensions And Sustain Extensibility), a mechanism to prevent extensibility failures in the TLS ecosystem. It reserves a set of TLS protocol values that may be advertised to ensure peers correctly handle unknown values. Status of This Memo This document is not an Internet Standards Track specification; it is published for informational purposes. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are candidates for any level of Internet Standard; see Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8701. Copyright Notice Copyright (c)20192020 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction 1.1. Requirements Language 2. GREASE Values 3. Client-Initiated Extension Points 3.1. Client Behavior 3.2. Server Behavior 4. Server-Initiated Extension Points 4.1. Server Behavior 4.2. Client Behavior 5. Sending GREASE Values 6. IANA Considerations 7. Security Considerations 8. Normative References Acknowledgments Author's Address 1. Introduction The TLS protocol [RFC8446] includes several points of extensibility, including the list of cipher suites and several lists of extensions. The values transmitted in these lists identify implementation capabilities. TLS follows a model where one side, usually the client, advertises capabilities, and the peer, usually the server, selects them. The responding side must ignore unknown values so that new capabilities may be introduced to the ecosystem while maintaining interoperability. However, bugs may cause an implementation to reject unknown values. It will interoperate with existing peers, so the mistake may spread through the ecosystem unnoticed. Later, when new values are defined, updated peers will discover that the metaphorical joint in the protocol has rusted shut and the new values cannot be deployed without interoperability failures. To avoid this problem, this document reserves some currently unused values for TLS implementations to advertise at random. Correctly implemented peers will ignore these values and interoperate. Peers that do not tolerate unknown values will fail to interoperate, revealing the mistake before it is widespread. In keeping with the rusted joint metaphor, this technique is called "GREASE" (Generate Random Extensions And Sustain Extensibility). 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. GREASE Values This document reserves a number of TLS protocol values, referred to as GREASE values. These values were allocated sparsely to discourage server implementations from conditioning on them. For convenience, they were also chosen so all types share a number scheme with a consistent pattern while avoiding collisions with any existing applicable registries in TLS. The following values are reserved as GREASE values for cipher suites and Application-Layer Protocol Negotiation (ALPN) [RFC7301] identifiers:+-------------+ |{0x0A,0x0A}| +-------------+ |{0x1A,0x1A}| +-------------+ |{0x2A,0x2A}| +-------------+ |{0x3A,0x3A}| +-------------+ |{0x4A,0x4A}| +-------------+ |{0x5A,0x5A}| +-------------+ |{0x6A,0x6A}| +-------------+ |{0x7A,0x7A}| +-------------+ |{0x8A,0x8A}| +-------------+ |{0x9A,0x9A}| +-------------+ |{0xAA,0xAA}| +-------------+ |{0xBA,0xBA}| +-------------+ |{0xCA,0xCA}| +-------------+ |{0xDA,0xDA}| +-------------+ |{0xEA,0xEA}| +-------------+ |{0xFA,0xFA}| +-------------+ Table 1: GREASE Values for Cipher Suites and ALPN IdentifiersThe following values are reserved as GREASE values for extensions, named groups, signature algorithms, and versions:+--------+ |0x0A0A| +--------+ |0x1A1A| +--------+ |0x2A2A| +--------+ |0x3A3A| +--------+ |0x4A4A| +--------+ |0x5A5A| +--------+ |0x6A6A| +--------+ |0x7A7A| +--------+ |0x8A8A| +--------+ |0x9A9A| +--------+ |0xAAAA| +--------+ |0xBABA| +--------+ |0xCACA| +--------+ |0xDADA| +--------+ |0xEAEA| +--------+ |0xFAFA| +--------+ Table 2: GREASE Values for Ex tensio ns, Named Groups , Sign ature Algori thms, and Ve rsionsThe values allocated above are thus no longer available for use as TLS or DTLS [RFC6347] version numbers. The following values are reserved as GREASE values forPskKeyExchangeModes. +------+ |PskKeyExchangeModes: 0x0B| +------+ |0x2A| +------+ |0x49| +------+ |0x68| +------+ |0x87| +------+ |0xA6| +------+ |0xC5| +------+ |0xE4| +------+ Tabl e 3: GREA SE V alue s for PskK eyEx chan geMo des3. Client-Initiated Extension Points Most extension points in TLS are offered by the client and selected by the server. This section details client and server behavior around GREASE values for these. 3.1. Client Behavior When sending a ClientHello, a client MAY behave asfollows.follows: * A client MAY select one or more GREASE cipher suite values and advertise them in the "cipher_suites" field. * A client MAY select one or more GREASE extension values and advertise them as extensions with varying length and contents. * A client MAY select one or more GREASE named group values and advertise them in the "supported_groups" extension, if sent. It MAY also send KeyShareEntry values for a subset of those selected in the "key_share" extension. For each of these, the "key_exchange" field MAY be any value. * A client MAY select one or more GREASE signature algorithm values and advertise them in the "signature_algorithms" or "signature_algorithms_cert" extensions, if sent. * A client MAY select one or more GREASE version values and advertise them in the "supported_versions" extension, if sent. * A client MAY select one or more GREASE PskKeyExchangeMode values and advertise them in the "psk_key_exchange_modes" extension, if sent. * A client MAY select one or more GREASE ALPN identifiers and advertise them in the "application_layer_protocol_negotiation" extension, if sent. Clients MUST reject GREASE values when negotiated by the server. In particular, the client MUST fail the connection if a GREASE value appears in any of the following: * The "version" value in a ServerHello or HelloRetryRequest * The "cipher_suite" value in a ServerHello * Any ServerHello extension * Any HelloRetryRequest, EncryptedExtensions, or Certificate extension in TLS 1.3 * The "namedcurve" value in a ServerKeyExchange for an Ephemeral Elliptic Curve Diffie-Hellman (ECDHE) cipher in TLS 1.2 [RFC5246] or earlier * The signature algorithm in a ServerKeyExchange signature in TLS 1.2 or earlier * The signature algorithm in a server CertificateVerify signature in TLS 1.3 Note that this can be implemented without special processing on the client. The client is already required to reject unknown server- selected values, so it may leave GREASE values as unknown and reuse the existing logic. 3.2. Server Behavior When processing a ClientHello, servers MUST NOT treat GREASE values differently from any unknown value. Servers MUST NOT negotiate any GREASE value when offered in a ClientHello. Servers MUST correctly ignore unknown values in a ClientHello and attempt to negotiate with one of the remaining parameters. (There may not be any known parameters remaining, in which case parameter negotiation will fail.) Note that these requirements are restatements or corollaries of existing server requirements in TLS. 4. Server-Initiated Extension Points Some extension points are offered by the server and selected by the client. This section details client and server behavior around GREASE values for these. 4.1. Server Behavior When sending a CertificateRequest in TLS 1.3, a server MAY behave as follows: * A server MAY select one or more GREASE extension values and advertise them as extensions with varying length and contents. * A server MAY select one or more GREASE signature algorithm values and advertise them in the "signature_algorithms" or "signature_algorithms_cert" extensions, if present. When sending a NewSessionTicket message in TLS 1.3, a server MAY select one or more GREASE extension values and advertise them as extensions with varying length and contents. Servers MUST reject GREASE values when negotiated by the client. In particular, the server MUST fail the connection if a GREASE value appears in any of the following: * Any Certificate extension in TLS 1.3 * The signature algorithm in a client CertificateVerify signature Note that this can be implemented without special processing on the server. The server is already required to reject unknown client- selected values, so it may leave GREASE values as unknown and reuse the existing logic. 4.2. Client Behavior When processing a CertificateRequest or NewSessionTicket, clients MUST NOT treat GREASE values differently from any unknown value. Clients MUST NOT negotiate any GREASE value when offered by the server. Clients MUST correctly ignore unknown values offered by the server and attempt to negotiate with one of the remaining parameters. (There may not be any known parameters remaining, in which case parameter negotiation will fail.) Note that these requirements are restatements or corollaries of existing client requirements in TLS. 5. Sending GREASE Values Implementations advertising GREASE values SHOULD select them at random. This is intended to encourage implementations to ignore all unknown values rather than any individual value. Implementations MUST honor protocol specifications when sending GREASE values. For instance, Section 4.2 of [RFC8446] forbids duplicate extension types within a single extension block. Implementations sending multiple GREASE extensions in a single block must therefore ensure the same value is not selected twice. Implementations SHOULD balance diversity in GREASE advertisements with determinism. For example, a client that randomly varies GREASE value positions for each connection may only fail against a broken server with some probability. This risks the failure being masked by automatic retries. A client that positions GREASE values deterministically over a period of time (such as a single software release) stresses fewer cases but is more likely to detect bugs from those cases. 6. IANA Considerations This document updates the "TLS Cipher Suites" registry, available at <https://www.iana.org/assignments/tls-parameters>: +-------------+-------------+---------+-------------+-----------+ | Value | Description | DTLS-OK | Recommended | Reference | +=============+=============+=========+=============+===========+ | {0x0A,0x0A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x1A,0x1A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x2A,0x2A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x3A,0x3A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x4A,0x4A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x5A,0x5A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x6A,0x6A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x7A,0x7A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x8A,0x8A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0x9A,0x9A} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0xAA,0xAA} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0xBA,0xBA} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0xCA,0xCA} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0xDA,0xDA} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0xEA,0xEA} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ | {0xFA,0xFA} | Reserved | Y | N | [RFC8701] | +-------------+-------------+---------+-------------+-----------+ Table4:1: Additions to the TLS Cipher Suites Registry This document updates the "TLS Supported Groups" registry, available at <https://www.iana.org/assignments/tls-parameters>: +-------+-------------+---------+-------------+-----------+ | Value | Description | DTLS-OK | Recommended | Reference | +=======+=============+=========+=============+===========+ | 2570 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 6682 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 10794 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 14906 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 19018 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 23130 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 27242 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 31354 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 35466 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 39578 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 43690 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 47802 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 51914 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 56026 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 60138 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ | 64250 | Reserved | Y | N | [RFC8701] | +-------+-------------+---------+-------------+-----------+ Table5:2: Additions to the TLS Supported Groups Registry This document updates the "TLS ExtensionType Values" registry, available at <https://www.iana.org/assignments/tls-extensiontype- values>: +-------+----------------+-------------+-------------+-----------+ | Value | Extension Name | TLS 1.3 | Recommended | Reference | +=======+================+=============+=============+===========+ | 2570 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 6682 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 10794 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 14906 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 19018 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 23130 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 27242 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 31354 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 35466 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 39578 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 43690 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 47802 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 51914 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 56026 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 60138 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ | 64250 | Reserved | CH, CR, NST | N | [RFC8701] | +-------+----------------+-------------+-------------+-----------+ Table6:3: Additions to the TLS ExtensionType Values Registry This document updates the "TLS Application-Layer Protocol Negotiation (ALPN) Protocol IDs" registry, available at <https://www.iana.org/assignments/tls-extensiontype-values>: +----------+-------------------------+-----------+ | Protocol | Identification Sequence | Reference | +==========+=========================+===========+ | Reserved | 0x0A 0x0A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x1A 0x1A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x2A 0x2A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x3A 0x3A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x4A 0x4A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x5A 0x5A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x6A 0x6A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x7A 0x7A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x8A 0x8A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0x9A 0x9A | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0xAA 0xAA | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0xBA 0xBA | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0xCA 0xCA | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0xDA 0xDA | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0xEA 0xEA | [RFC8701] | +----------+-------------------------+-----------+ | Reserved | 0xFA 0xFA | [RFC8701] | +----------+-------------------------+-----------+ Table7:4: Additions to the TLS Application- Layer Protocol Negotiation (ALPN) Protocol IDs Registry 7. Security Considerations GREASE values cannot be negotiated, so they do not directly impact the security of TLS connections. Historically, when interoperability problems arise in deploying new TLS features, implementations have used a fallback retry on error with the feature disabled. This allows an active attacker to silently disable the new feature. By preventing a class of such interoperability problems, GREASE reduces the need for this kind of fallback. Implementations SHOULD NOT retry with GREASE disabled on connection failure. While allowing an attacker to disable GREASE is unlikely to have immediate security consequences, such a fallback would prevent GREASE from defending against extensibility failures. If an implementation does not select GREASE values at random, it is possible it will allow for fingerprinting of the implementation or perhaps even of individual users. This can result in a negative impact to a user's privacy. 8. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>. [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, <https://www.rfc-editor.org/info/rfc5246>. [RFC6347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer Security Version 1.2", RFC 6347, DOI 10.17487/RFC6347, January 2012, <https://www.rfc-editor.org/info/rfc6347>. [RFC7301] Friedl, S., Popov, A., Langley, A., and E. Stephan, "Transport Layer Security (TLS) Application-Layer Protocol Negotiation Extension", RFC 7301, DOI 10.17487/RFC7301, July 2014, <https://www.rfc-editor.org/info/rfc7301>. [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, <https://www.rfc-editor.org/info/rfc8446>. Acknowledgments The author would like to thank Adam Langley, Nick Harper, and Steven Valdez for their feedback and suggestions. In addition, the rusted joint metaphor is originally due to Adam Langley. Author's Address David Benjamin Google LLC Email: davidben@google.com