<?xmlversion="1.0" encoding="US-ASCII"?>version='1.0' encoding='utf-8'?> <!DOCTYPE rfc SYSTEM"rfc2629.dtd"> <?xml-stylesheet type='text/xsl' href='rfc2629.xslt' ?> <?rfc toc="yes"?> <?rfc tocompact="yes"?> <?rfc tocdepth="2"?> <?rfc symrefs="no"?> <?rfc sortrefs="no" ?> <?rfc compact="yes" ?> <?rfc subcompact="no" ?> <?rfc rfcedstyle="yes" ?>"rfc2629-xhtml.ent"> <rfc xmlns:xi="http://www.w3.org/2001/XInclude" category="std" docName="draft-ietf-nfsv4-rfc5661sesqui-msns-04" number="8881" obsoletes="5661"ipr="pre5378Trust200902">ipr="pre5378Trust200902" updates="" submissionType="IETF" consensus="true" xml:lang="en" tocInclude="true" tocDepth="2" symRefs="false" sortRefs="false" version="3"> <!-- xml2rfc v2v3 conversion 2.41.0 --> <front> <title abbrev="NFSv4.1 with Namespace Update "> Network File System (NFS) Version 4 Minor Version 1 Protocol </title> <seriesInfo name="RFC" value="8881"/> <author fullname="David Noveck" initials="D." surname="Noveck" role="editor"> <organization abbrev="NetApp">NetApp</organization> <address> <postal> <street>1601 Trapelo Road, Suite 16</street> <city>Waltham</city> <region>MA</region> <code>02451</code><country>USA</country><country>United States of America</country> </postal> <phone>+1-781-768-5347</phone> <email>dnoveck@netapp.com</email> </address> </author> <authorinitials='C.' surname='Lever' fullname = 'Charles Lever'>initials="C." surname="Lever" fullname="Charles Lever"> <organizationabbrev='ORACLE'>abbrev="ORACLE"> Oracle Corporation </organization> <address> <postal> <street>1015 Granger Avenue</street> <city>Ann Arbor</city> <region>MI</region> <code>48104</code> <country>United States of America</country> </postal><phone>+1 248 614 5091</phone><phone>+1-248-614-5091</phone> <email>chuck.lever@oracle.com</email> </address> </author> <date month="August" year="2020"/> <area>Transport</area> <workgroup>NFSv4</workgroup> <keyword>example</keyword> <abstract> <t> This document describes the Network File System (NFS) version 4 minor version 1, including features retained from the base protocol (NFS version 4 minor version 0, which is specified in RFC 7530) and protocol extensions made subsequently. The later minor version has no dependencies on NFS version 4 minor version 0, and is considered a separate protocol. </t> <t> This document obsoletesRFC5661.RFC 5661. It substantially revises the treatment of features relating to multi-server namespace, superseding the description of those features appearing inRFC5661.RFC 5661. </t> </abstract> </front> <middle> <section anchor="intro"title="Introduction" >numbered="true" toc="default"> <name>Introduction</name> <section anchor="intro_the_document"title="Introductionnumbered="true" toc="default"> <name>Introduction tothis Update">This Update</name> <t> Two important features previously defined in minor version 0 but never fully addressed in minor version 1 are trunking, which is the simultaneous use of multiple connections between a client and server, potentially to different network addresses, andtransparent state migration,Transparent State Migration, which allows a file system to be transferred between servers in a way that provides to the client the ability to maintain its existing locking state across the transfer. </t> <t> The revised description of the NFS version 4 minor version 1 (NFSv4.1) protocol presented in this update is necessary to enable full use of these features together with other multi-server namespace features. This document is in the form of an updated description of the NFSv4.1 protocol previously defined inRFC5661RFC 5661 <xreftarget="RFC5661"/>. RFC5661target="RFC5661" format="default"/>. RFC 5661 is obsoleted by this document. However, the update has a limited scope and is focused on enabling full use of trunking andtransparent state migration.Transparent State Migration. The need for these changes is discussed inAppendix A. Appendix B<xref target="NEED"/>. <xref target="CHG"/> describes the specific changes made to arrive at the current text. </t> <t> This limited-scope update replaces the current NFSv4.1 RFC with the intention of providing an authoritative and complete specification, the motivation for which is discussed in <xreftarget="I-D.roach-bis-documents"/>,target="I-D.roach-bis-documents" format="default"/>, addressing the issues within the scope of the update. However, it will not address issues that are known but outside of this limited scope as could be expected by a full update of the protocol. Below are some areaswhichthat are known to need addressing in a future update of theprotocol. <list style="symbols"> <t>protocol: </t> <ul spacing="normal"> <li> Work needs to be done with regard toRFC8178RFC 8178 <xreftarget="RFC8178"/>target="RFC8178" format="default"/>, which establishes NFSv4-wide versioning rules. AsRFC5661RFC 5661 is currently inconsistent with that document, changes are needed in order to arrive at a situation in which there would be no need forRFC8178RFC 8178 to update the NFSv4.1 specification.</t> <t></li> <li> Work needs to be done with regard toRFC8434RFC 8434 <xref target="RFC8434"/>,format="default"/>, which establishes the requirements forpNFSparallel NFS (pNFS) layout types, which are not clearly defined inRFC5661.RFC 5661. When that work is done and the resulting documents approved, the new NFSv4.1 specification document will provide a clear set of requirements for layout types and a description of the file layout type that conforms to those requirements. Other layout types will have their own specification documents thatconformsconform to those requirements as well.</t></li> <li> <t> Work needs to be done to address many errata reports relevant to RFC 5661, other than errata report 2006 <xreftarget="Err2006"/>,target="Err2006" format="default"/>, which is addressed in this document. Addressing that report was not deferrable because of the interaction of the changes suggested there and the newly described handling of state and session migration.<vspace blankLines="1"/></t> <t> The errata reports that have been deferred and that will need to be addressed in a later document include reports currently assigned a range of statuses in the errata reportingsystemsystem, including reports marked Accepted and those marked Hold For Document Update because the change was too minor to address immediately.<vspace blankLines="1"/></t> <t> In addition, there is a set of other reports, including at least one in state Rejected,whichthat will need to be addressed in a later document. This will involve making changes to consensus decisions reflected in RFC 5661, insituationsituations in which the working group has decided that the treatment in RFC 5661 isincorrect,incorrect and needs to be revised to reflect the working group's new consensus and to ensure compatibility with existing implementations that do not follow the handling described ininRFC 5661.<vspace blankLines="1"/></t> <t> Note that it is expected that all such errata reports will remain relevant toimplementersimplementors and the authors of an eventual rfc5661bis, despite the fact that thisdocument, when approved, will obsoletedocument obsoletes RFC 5661 <xreftarget="RFC5661"/>.target="RFC5661" format="default"/>. </t><t></li> <li> There is a need for a new approach to the description of internationalization since the current internationalization section (<xreftarget="internationalization"/>)target="internationalization" format="default"/>) has never been implemented and does not meet the needs of the NFSv4 protocol. Possible solutions are to create a new internationalization section modeled on that in <xreftarget="RFC7530"/>target="RFC7530" format="default"/> or to create a new document describing internationalization for all NFSv4 minor versions and reference that document in the RFCs defining both NFSv4.0 and NFSv4.1.</t> <t></li> <li> There is a need for a revised treatment of security in NFSv4.1. The issues with the existing treatment are discussed in <xreftarget="SECBAD"/>. </t> </list> </t>target="SECBAD" format="default"/>. </li> </ul> <t> Until the above work is done, there will not be a consistent set of documentsprovidingthat provides a description of the NFSv4.1protocolprotocol, and any full description would involve documents updating other documents within the specification. The updates applied byRFC8434RFC 8434 <xreftarget="RFC8434"/>target="RFC8434" format="default"/> andRFC8178RFC 8178 <xreftarget="RFC8178"/>target="RFC8178" format="default"/> toRFC5661RFC 5661 also apply to this specification, and will apply to any subsequent v4.1 specification until that work is done. </t> </section> <section anchor="intro_the_protocol"title="Thenumbered="true" toc="default"> <name>The NFS Version 4 Minor Version 1Protocol">Protocol</name> <t> The NFS version 4 minor version 1 (NFSv4.1) protocol is the second minor version of the NFS version 4 (NFSv4) protocol. The first minor version, NFSv4.0, is now described in RFC 7530 <xref target="RFC7530"/>.format="default"/>. It generally follows the guidelines for minor versioning that are listed in Section10<xref target="RFC3530" sectionFormat="bare" section="10"/> of RFC3530.3530 <xref target="RFC3530" format="default"/>. However, it diverges from guidelines 11 ("a client and server that support minor version X must support minor versions 0 through X-1") and 12 ("no new features may be introduced as mandatory in a minor version"). These divergences are due to the introduction of the sessions model for managing non-idempotent operations and the RECLAIM_COMPLETE operation. These two new features are infrastructural in nature and simplify implementation of existing and other new features. Making them anything butREQUIRED<bcp14>REQUIRED</bcp14> would add undue complexity to protocol definition and implementation. NFSv4.1 accordingly updates the <xreftarget="minor_versioning">minortarget="minor_versioning" format="default">minor versioning guidelines</xref>. </t> <t> As a minor version, NFSv4.1 is consistent with the overall goals for NFSv4, but extends the protocol so as to better meet those goals, based on experiences with NFSv4.0. In addition, NFSv4.1 has adopted some additional goals, which motivate some of the major extensions in NFSv4.1. </t> </section> <sectiontitle="Requirements Language">numbered="true" toc="default"> <name>Requirements Language</name> <t>The key words"MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY","<bcp14>MUST</bcp14>", "<bcp14>MUST NOT</bcp14>", "<bcp14>REQUIRED</bcp14>", "<bcp14>SHALL</bcp14>", "<bcp14>SHALL NOT</bcp14>", "<bcp14>SHOULD</bcp14>", "<bcp14>SHOULD NOT</bcp14>", "<bcp14>RECOMMENDED</bcp14>", "<bcp14>MAY</bcp14>", and"OPTIONAL""<bcp14>OPTIONAL</bcp14>" in this document are to be interpreted as described in RFC 2119 <xreftarget="RFC2119">RFC 2119</xref>. </t>target="RFC2119"/>.</t> </section> <section anchor="scope_of_doc"title="Scopenumbered="true" toc="default"> <name>Scope of ThisDocument">Document</name> <t> This document describes the NFSv4.1 protocol. With respect to NFSv4.0, this document does not:<list style='symbols'> <t></t> <ul spacing="normal"> <li> describe the NFSv4.0 protocol, except where needed to contrast with NFSv4.1.</t> <t></li> <li> modify the specification of the NFSv4.0 protocol.</t> <t></li> <li> clarify the NFSv4.0 protocol.</t> </list> </t></li> </ul> </section> <section anchor="version4_goals"title="NFSv4 Goals">numbered="true" toc="default"> <name>NFSv4 Goals</name> <t> The NFSv4 protocol is a further revision of the NFS protocol defined already by NFSv3 <xref target="RFC1813"/>.format="default"/>. It retains the essential characteristics of previous versions: easy recovery; independence of transport protocols, operating systems, and file systems; simplicity; and good performance. NFSv4 has the following goals:<list style='symbols'></t> <ul spacing="normal"> <li> <t> Improved access and good performance on the Internet<vspace blankLines='1' /></t> <t> The protocol is designed to transit firewalls easily, perform well where latency is high and bandwidth is low, and scale to very large numbers of clients per server. </t> </li> <li> <t> Strong security with negotiation built into the protocol<vspace blankLines='1' /></t> <t> The protocol builds on the work of the ONCRPC working group in supporting the RPCSEC_GSS protocol. Additionally, the NFSv4.1 protocol provides a mechanism to allow clients and servers the ability to negotiate security and require clients and servers to support a minimal set of security schemes. </t> </li> <li> <t> Good cross-platform interoperability<vspace blankLines='1' /></t> <t> The protocol features a file system model that provides a useful, common set of features that does not unduly favor one file system or operating system over another. </t> </li> <li> <t> Designed for protocol extensions<vspace blankLines='1' /></t> <t> The protocol is designed to accept standard extensions within a framework that enables and encourages backward compatibility. </t></list> </t></li> </ul> </section> <section anchor="minor_version1_goals"title="NFSv4.1 Goals">numbered="true" toc="default"> <name>NFSv4.1 Goals</name> <t> NFSv4.1 has the following goals, within the framework established by the overall NFSv4 goals.<list style="symbols"> <t></t> <ul spacing="normal"> <li> To correct significant structural weaknesses and oversights discovered in the base protocol.</t> <t></li> <li> To add clarity and specificity to areas left unaddressed or not addressed in sufficient detail in the base protocol. However, as stated in <xref target="scope_of_doc"/>,format="default"/>, it is not a goal to clarify the NFSv4.0 protocol in the NFSv4.1 specification.</t> <t></li> <li> To add specific features based on experience with the existing protocol and recent industry developments.</t> <t></li> <li> To provide protocol support to take advantage of clustered server deployments including the ability to provide scalable parallel access to files distributed among multiple servers.</t> </list> </t></li> </ul> </section> <section anchor="intro_definitions"title="General Definitions">numbered="true" toc="default"> <name>General Definitions</name> <t> The following definitions provide an appropriate context for the reader.<list style='hanging'> <t hangText="Byte:"</t> <dl newline="false" spacing="normal"> <dt>Byte:</dt> <dd anchor="byte"> In this document, a byte is an octet, i.e., a datum exactly 8 bits in length.</t> <t hangText="Client:"</dd> <dt>Client:</dt> <dd anchor="client_def"> <t> The client is the entity that accesses the NFS server's resources. The client may be an application that contains the logic to access the NFS server directly. The client may also be the traditional operating system client that provides remote file system services for a set of applications.<vspace blankLines='1' /></t> <t> A client is uniquely identified by a client owner.<vspace blankLines='1' /></t> <t> With reference to byte-range locking, the client is also the entity that maintains a set of locks on behalf of one or more applications. This client is responsible for crash or failure recovery for those locks it manages.<vspace blankLines='1' /></t> <t> Note that multiple clients may share the same transport and connection and multiple clients may exist on the same network node. </t><t hangText="Client ID:"></dd> <dt>Client ID:</dt> <dd> The client ID is a 64-bit quantity used as a unique, short-hand reference to a client-supplied verifier and client owner. The server is responsible for supplying the client ID.</t> <t hangText="Client Owner:"></dd> <dt>Client Owner:</dt> <dd> The client owner is a unique string, opaque to the server, that identifies a client. Multiple network connections and source network addresses originating from those connections may share a client owner. The server is expected to treat requests from connections with the same client owner as coming from the same client.</t> <t hangText="File System:"></dd> <dt>File System:</dt> <dd> The file system is the collection of objects on a server (as identified by the major identifier of a server owner, which is defined later in this section) that share the same fsid attribute (see <xreftarget="attrdef_fsid"/>). </t> <t hangText="Lease:">target="attrdef_fsid" format="default"/>). </dd> <dt>Lease:</dt> <dd> <t> A lease is an interval of time defined by the server for which the client is irrevocably granted locks. At the end of a lease period, locks may be revoked if the lease has not been extended. A lock must be revoked if a conflicting lock has been granted after the lease interval.<vspace blankLines='1' /></t> <t> A server grants a client a single lease for all state. </t><t hangText="Lock:"></dd> <dt>Lock:</dt> <dd> The term "lock" is used to refer to byte-range (in UNIX environments, also known as record) locks, share reservations, delegations, or layouts unless specifically stated otherwise.</t> <t hangText="Secret</dd> <dt>Secret State Verifier(SSV):">(SSV):</dt> <dd> The SSV is a unique secret key shared between a client and server. The SSV serves as the secret key for an internal (that is, internal to NFSv4.1) Generic Security Services (GSS) mechanism (the SSV GSS mechanism; see <xreftarget="ssv_mech"/>).target="ssv_mech" format="default"/>). The SSV GSS mechanism uses the SSV to compute message integrity code (MIC) and Wrap tokens. See <xreftarget="protect_state_change"/>target="protect_state_change" format="default"/> for more details on how NFSv4.1 uses the SSV and the SSV GSS mechanism.</t> <t hangText="Server:"></dd> <dt>Server:</dt> <dd> The Server is the entity responsible for coordinating client access to a set of file systems and is identified by a server owner. A server can span multiple network addresses.</t> <t hangText="Server Owner:"></dd> <dt>Server Owner:</dt> <dd> The server owner identifies the server to the client. The server owner consists of a major identifier and a minor identifier. When the client has two connections each to a peer with the same major identifier, the client assumes that both peers are the same server (the server namespace is the same via each connection) and that lock state issharableshareable across both connections. When each peer has both the same major and minor identifiers, the client assumes that each connection might be associable with the same session.</t> <t hangText="Stable Storage:"></dd> <dt>Stable Storage:</dt> <dd> <t> Stable storage is storage from which data stored by an NFSv4.1 server can be recovered without data loss from multiple power failures (including cascading power failures, that is, several power failures in quick succession), operating system failures, and/or hardware failure of components other than the storage medium itself (such as disk, nonvolatile RAM, flash memory, etc.).<vspace blankLines='1' /></t> <t> Some examples of stable storage that are allowable for an NFS server include:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> Media commit of data; that is, the modified data has been successfully written to the disk media, for example, the disk platter.</t> <t></li> <li> An immediate reply disk drive with battery-backed, on-drive intermediate storage or uninterruptible power system (UPS).</t> <t></li> <li> Server commit of data with battery-backed intermediate storage and recovery software.</t> <t></li> <li> Cache commit with uninterruptible power system (UPS) and recovery software.</t> </list> </t> <t hangText="Stateid:"></li> </ol> </dd> <dt>Stateid:</dt> <dd> A stateid is a 128-bit quantity returned by a server that uniquely defines the open and locking states provided by the server for a specific open-owner or lock-owner/open-owner pair for a specific file and type of lock.</t> <t hangText="Verifier:"></dd> <dt>Verifier:</dt> <dd> A verifier is a 64-bit quantity generated by the client that the server can use to determine if the client has restarted and lost all previous lock state.</t> </list> </t></dd> </dl> </section> <section anchor="feature-overview"title="Overviewnumbered="true" toc="default"> <name>Overview of NFSv4.1Features">Features</name> <t> The major features of the NFSv4.1 protocol will be reviewed in brief. This will be done to provide an appropriate context for both the reader who is familiar with the previous versions of the NFS protocol and the reader who is new to the NFS protocols. For the reader new to the NFS protocols, there is still a set of fundamental knowledge that is expected. The reader should be familiar with the External Data Representation (XDR) and Remote Procedure Call (RPC) protocols as described in <xref target="RFC4506"/>format="default"/> and <xref target="RFC5531"/>.format="default"/>. A basic knowledge of file systems and distributed file systems is expected as well. </t> <t> In general, this specification of NFSv4.1 will not distinguish those features added in minor version 1 from those present in the base protocol but will treat NFSv4.1 as a unified whole. See <xref target="intro_differences"/>format="default"/> for a summary of the differences between NFSv4.0 and NFSv4.1. </t> <section anchor="rpc_and_security"title="RPCnumbered="true" toc="default"> <name>RPC andSecurity">Security</name> <t> As with previous versions of NFS, the External Data Representation (XDR) and Remote Procedure Call (RPC) mechanisms used for the NFSv4.1 protocol are those defined in <xref target="RFC4506"/>format="default"/> and <xref target="RFC5531"/>.format="default"/>. To meet end-to-end security requirements, the RPCSEC_GSS framework <xref target="RFC2203"/>format="default"/> is used to extend the basic RPC security. With the use of RPCSEC_GSS, various mechanisms can be provided to offer authentication, integrity, and privacy to the NFSv4 protocol. Kerberos V5 is used as described in <xref target="RFC4121"/>format="default"/> to provide one security framework. With the use of RPCSEC_GSS, other mechanisms may also be specified and used for NFSv4.1 security. </t> <t> To enable in-band security negotiation, the NFSv4.1 protocol has operations that provide the client a method of querying the server about its policies regarding which security mechanisms must be used for access to the server's file system resources. With this, the client can securely match the security mechanism that meets the policies specified at both the client and server. </t> <t> NFSv4.1 introduces parallel access (see <xreftarget="parallel_access"/>),target="parallel_access" format="default"/>), which is called pNFS. The security framework described in this section is significantly modified by the introduction of pNFS (see <xreftarget="security_considerations_pnfs"/>),target="security_considerations_pnfs" format="default"/>), because data access is sometimes not over RPC. The level of significance varies with the storage protocol (see <xreftarget="storage_protocol"/>)target="storage_protocol" format="default"/>) and can be as low as zero impact (see <xreftarget="file_security_considerations"/>).target="file_security_considerations" format="default"/>). </t> </section> <section anchor="protocol_structure"title="Protocol Structure">numbered="true" toc="default"> <name>Protocol Structure</name> <section anchor="core_protocol"title="Core Protocol">numbered="true" toc="default"> <name>Core Protocol</name> <t> Unlike NFSv3, which used a series of ancillary protocols (e.g., NLM, NSM (Network Status Monitor), MOUNT), within all minor versions of NFSv4 a single RPC protocol is used to make requests to the server. Facilities that had been separate protocols, such as locking, are now integrated within a single unified protocol. </t> </section> <section anchor="parallel_access"title="Parallel Access">numbered="true" toc="default"> <name>Parallel Access</name> <t> Minor version 1 supports high-performance data access to a clustered server implementation by enabling a separation of metadata access and data access, with the latter done to multiple servers in parallel. </t> <t> Such parallel data access is controlled by recallable objects known as "layouts", which are integrated into the protocol locking model. Clients direct requests for data access to a set of data servers specified by the layout via a data storage protocol which may be NFSv4.1 or may be another protocol. </t> <t> Because the protocols used for parallel data access are not necessarily RPC-based, the RPC-based security model (<xreftarget="rpc_and_security"/>)target="rpc_and_security" format="default"/>) is obviously impacted (see <xreftarget="security_considerations_pnfs"/>).target="security_considerations_pnfs" format="default"/>). The degree of impact varies with the storage protocol (see <xreftarget="storage_protocol"/>)target="storage_protocol" format="default"/>) used for data access, and can be as low as zero (see <xreftarget="file_security_considerations"/>).target="file_security_considerations" format="default"/>). </t> </section> </section> <section anchor="file_system_model"title="Filenumbered="true" toc="default"> <name>File SystemModel">Model</name> <t> The general file system model used for the NFSv4.1 protocol is the same as previous versions. The server file system is hierarchical with the regular files contained within being treated as opaque byte streams. In a slight departure, file and directory names are encoded with UTF-8 to deal with the basics of internationalization. </t> <t> The NFSv4.1 protocol does not require a separate protocol to provide for the initial mapping between path name and filehandle. All file systems exported by a server are presented as a tree so that all file systems are reachable from a special per-server global root filehandle. This allows LOOKUP operations to be used to perform functions previously provided by the MOUNT protocol. The server provides any necessary pseudo file systems to bridge any gaps that arise due to unexported gaps between exported file systems. </t> <section anchor="intro_filehandles"title="Filehandles">numbered="true" toc="default"> <name>Filehandles</name> <t> As in previous versions of the NFS protocol, opaque filehandles are used to identify individual files and directories. Lookup-type and create operations translate file and directory names to filehandles, which are then used to identify objects in subsequent operations. </t> <t> The NFSv4.1 protocol provides support for persistent filehandles, guaranteed to be valid for the lifetime of the file system object designated. In addition, it provides support to servers to provide filehandles with more limited validity guarantees, called volatile filehandles. </t> </section> <section anchor="intro_attributes"title="File Attributes">numbered="true" toc="default"> <name>File Attributes</name> <t> The NFSv4.1 protocol has a rich and extensible file object attribute structure, which is divided intoREQUIRED, RECOMMENDED,<bcp14>REQUIRED</bcp14>, <bcp14>RECOMMENDED</bcp14>, and named attributes (see <xreftarget="file_attributes"/>).target="file_attributes" format="default"/>). </t> <t> Several (but not all) of theREQUIRED<bcp14>REQUIRED</bcp14> attributes are derived from the attributes of NFSv3 (see the definition of the fattr3 data type in <xreftarget="RFC1813"/>).target="RFC1813" format="default"/>). An example of aREQUIRED<bcp14>REQUIRED</bcp14> attribute is the file object's type (<xreftarget="attrdef_type"/>)target="attrdef_type" format="default"/>) so that regular files can be distinguished from directories (also known as folders in some operating environments) and other types of objects.REQUIRED<bcp14>REQUIRED</bcp14> attributes are discussed in <xreftarget="mandatory_attributes_intro"/>.target="mandatory_attributes_intro" format="default"/>. </t> <t> An example of threeRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes are acl, sacl, and dacl. These attributes define an Access Control List (ACL) on a file object (<xreftarget="acl"/>).target="acl" format="default"/>). An ACL provides directory and file access control beyond the model used in NFSv3. The ACL definition allows for specification of specific sets of permissions for individual users and groups. In addition, ACL inheritance allows propagation of access permissions and restrictions down a directory tree as file system objects are created.RECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes are discussed in <xreftarget="recommended_attributes_intro"/>.target="recommended_attributes_intro" format="default"/>. </t> <t> A named attribute is an opaque byte stream that is associated with a directory or file and referred to by a string name. Named attributes are meant to be used by client applications as a method to associate application-specific data with a regular file or directory. NFSv4.1 modifies named attributes relative to NFSv4.0 by tightening the allowed operations in order to prevent the development of non-interoperable implementations. Named attributes are discussed in <xref target="named_attributes_intro"/>.format="default"/>. </t> </section> <sectiontitle="Multi-Server Namespace" anchor="PREP-intro">anchor="PREP-intro" numbered="true" toc="default"> <name>Multi-Server Namespace</name> <t> NFSv4.1 contains a number of features to allow implementation of namespaces that cross server boundaries and that allow and facilitate anon-disruptivenondisruptive transfer of support for individual file systems between servers. They are all based upon attributes that allow one file system to specify alternate, additional, and new location information that specifies how the client may access that file system. </t> <t> These attributes can be used to provide for individual active file systems:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Alternate network addresses to access the current file system instance.</t> <t></li> <li> The locations of alternate file system instances or replicas to be used in the event that the current file system instance becomes unavailable.</t> </list> </t></li> </ul> <t> These file system location attributes may be used together with the concept of absent file systems, in which a position in the server namespace is associated with locations on other servers without there being any corresponding file system instance on the current server. For example,<list style="symbols"> <t></t> <ul spacing="normal"> <li> These attributes may be used with absent file systems to implement referrals whereby one server may direct the client to a file system provided by another server. This allows extensive multi-server namespaces to be constructed.</t> <t></li> <li> These attributes may be provided when a previously present file system becomes absent. This allowsnon-disruptivenondisruptive migration of file systems to alternate servers.</t> </list> </t></li> </ul> </section> </section> <section anchor="intro_locking"title="Locking Facilities">numbered="true" toc="default"> <name>Locking Facilities</name> <t> As mentioned previously, NFSv4.1 is a single protocol that includes locking facilities. These locking facilities include support for many types of locks including a number of sorts of recallable locks. Recallable locks such as delegations allow the client to be assured that certain events will not occur so long as that lock is held. When circumstances change, the lock is recalled via a callback request. The assurances provided by delegations allow more extensive caching to be done safely when circumstances allow it. </t> <t> The types of locks are: </t><t> <list style="symbols"> <t><ul spacing="normal"> <li> Share reservations as established by OPEN operations.</t> <t></li> <li> Byte-range locks.</t> <t></li> <li> File delegations, which are recallable locks that assure the holder that inconsistent opens and file changes cannot occur so long as the delegation is held.</t> <t></li> <li> Directory delegations, which are recallable locks that assure the holder that inconsistent directory modifications cannot occur so long as the delegation is held.</t> <t></li> <li> Layouts, which are recallable objects that assure the holder that direct access to the file data may be performed directly by the client and that no change to the data's location that is inconsistent with that access may be made so long as the layout is held.</t> </list> </t></li> </ul> <t> All locks for a given client are tied together under a single client-wide lease. All requests made on sessions associated with the client renew that lease. When the client's lease is not promptly renewed, the client's locks are subject to revocation. In the event of server restart, clients have the opportunity to safely reclaim their locks within a special grace period. </t> </section> </section> <section anchor="intro_differences"title="Differencesnumbered="true" toc="default"> <name>Differences fromNFSv4.0">NFSv4.0</name> <t> The following summarizes the major differences between minor version 1 and the base protocol:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Implementation of the sessions model (<xreftarget="Session"/>). </t> <t>target="Session" format="default"/>). </li> <li> Parallel access to data (<xreftarget="pnfs"/>). </t> <t>target="pnfs" format="default"/>). </li> <li> Addition of the RECLAIM_COMPLETE operation to better structure the lock reclamation process (<xreftarget="OP_RECLAIM_COMPLETE"/>). </t>target="OP_RECLAIM_COMPLETE" format="default"/>). </li> <li> <t> Enhanced delegation support as follows.<list style="symbols"> <t></t> <ul spacing="normal"> <li> Delegations on directories and other file types in addition to regular files (<xreftarget="OP_GET_DIR_DELEGATION"/>,target="OP_GET_DIR_DELEGATION" format="default"/>, <xreftarget="OP_WANT_DELEGATION"/>). </t> <t>target="OP_WANT_DELEGATION" format="default"/>). </li> <li> Operations to optimize acquisition of recalled or denied delegations (<xreftarget="OP_WANT_DELEGATION"/>,target="OP_WANT_DELEGATION" format="default"/>, <xreftarget="OP_CB_PUSH_DELEG"/>,target="OP_CB_PUSH_DELEG" format="default"/>, <xreftarget="OP_CB_RECALLABLE_OBJ_AVAIL"/>). </t> <t>target="OP_CB_RECALLABLE_OBJ_AVAIL" format="default"/>). </li> <li> Notifications of changes to files and directories (<xreftarget="OP_GET_DIR_DELEGATION"/>,target="OP_GET_DIR_DELEGATION" format="default"/>, <xreftarget="OP_CB_NOTIFY"/>). </t> <t>target="OP_CB_NOTIFY" format="default"/>). </li> <li> A method to allow a server to indicate that it is recalling one or more delegations for resource management reasons, and thus a method to allow the client to pick which delegations to return (<xreftarget="OP_CB_RECALL_ANY"/>). </t> </list> </t> <t>target="OP_CB_RECALL_ANY" format="default"/>). </li> </ul> </li> <li> Attributes can be set atomically during exclusive file create via the OPEN operation (see the new EXCLUSIVE4_1 creation method in <xreftarget="OP_OPEN"/>). </t> <t>target="OP_OPEN" format="default"/>). </li> <li> Open files can be preserved if removed and the hard link count ("hard link" is defined in an <xreftarget="hardlink">Opentarget="hardlink" format="default">Open Group</xref> standard) goes to zero, thus obviating the need for clients to rename deleted files to partially hidden names -- colloquially called "silly rename" (see the new OPEN4_RESULT_PRESERVE_UNLINKED reply flag in <xreftarget="OP_OPEN"/>). </t> <t>target="OP_OPEN" format="default"/>). </li> <li> Improved compatibility with Microsoft Windows for Access Control Lists (<xreftarget="attrdef_sacl"/>,target="attrdef_sacl" format="default"/>, <xreftarget="attrdef_dacl"/>,target="attrdef_dacl" format="default"/>, <xreftarget="auto_inherit"/>). </t> <t>target="auto_inherit" format="default"/>). </li> <li> Data retention (<xreftarget="retention"/>). </t> <t>target="retention" format="default"/>). </li> <li> Identification of the implementation of the NFS client and server (<xreftarget="OP_EXCHANGE_ID"/>). </t> <t>target="OP_EXCHANGE_ID" format="default"/>). </li> <li> Support for notification of the availability of byte-range locks (see the new OPEN4_RESULT_MAY_NOTIFY_LOCK reply flag in <xreftarget="OP_OPEN"/>target="OP_OPEN" format="default"/> and see <xreftarget="OP_CB_NOTIFY_LOCK"/>). </t> <t>target="OP_CB_NOTIFY_LOCK" format="default"/>). </li> <li> In NFSv4.1, LIPKEY and SPKM-3 are not required security mechanisms <xreftarget="RFC2847"/>. </t> </list> </t>target="RFC2847" format="default"/>. </li> </ul> </section> </section> <section anchor="Core_Infrastructure"title="Core Infrastructure">numbered="true" toc="default"> <name>Core Infrastructure</name> <section anchor="Introduction"title="Introduction">numbered="true" toc="default"> <name>Introduction</name> <t> NFSv4.1 relies on core infrastructure common to nearly every operation. This core infrastructure is described in the remainder of this section. </t> </section><!-- Introduction --><section anchor="RPC_and_XDR"title="RPCnumbered="true" toc="default"> <name>RPC andXDR">XDR</name> <t> The NFSv4.1 protocol is a Remote Procedure Call (RPC) application that uses RPC version 2 and the corresponding eXternal Data Representation (XDR) as defined in <xreftarget="RFC5531"/>target="RFC5531" format="default"/> and <xreftarget="RFC4506"/>.target="RFC4506" format="default"/>. </t> <section anchor="RPC-based_Security"title="RPC-Based Security">numbered="true" toc="default"> <name>RPC-Based Security</name> <t> Previous NFS versions have been thought of as having a host-based authentication model, where the NFS server authenticates the NFS client, and trusts the client to authenticate all users. Actually, NFS has always depended on RPC for authentication. One of the first forms of RPC authentication, AUTH_SYS, had no strong authentication and required a host-based authentication approach. NFSv4.1 also depends on RPC for basic security services and mandates RPC support for a user-based authentication model. The user-based authentication model has user principals authenticated by a server, and in turn the server authenticated by user principals. RPC provides some basic security services that are used by NFSv4.1. </t> <section anchor="RPC_Security_Flavors"title="RPCnumbered="true" toc="default"> <name>RPC SecurityFlavors">Flavors</name> <t> As described inSection 7.2 ("Authentication") of"Authentication", <xreftarget="RFC5531"/>,target="RFC5531" sectionFormat="of" section="7"/>, RPC security is encapsulated in the RPC header, via a security or authentication flavor, and information specific to the specified security flavor. Every RPC header conveys information used to identify and authenticate a client and server. As discussed in <xref target="RPCSEC_GSS_and_Security_Services"/>,format="default"/>, some security flavors provide additional security services. </t> <t> NFSv4.1 clients and serversMUST<bcp14>MUST</bcp14> implement RPCSEC_GSS. (This requirement to implement is not a requirement to use.) Other flavors, such as AUTH_NONE and AUTH_SYS,MAY<bcp14>MAY</bcp14> be implemented as well. </t> <section anchor="RPCSEC_GSS_and_Security_Services"title="RPCSEC_GSSnumbered="true" toc="default"> <name>RPCSEC_GSS and SecurityServices">Services</name> <t> RPCSEC_GSS <xref target="RFC2203"/>format="default"/> uses the functionality of GSS-API <xreftarget="RFC2743"/>.target="RFC2743" format="default"/>. This allows for the use of various security mechanisms by the RPC layer without the additional implementation overhead of adding RPC security flavors. </t> <section anchor="Authentication_Integrity_Privacy"title="Identification,numbered="true" toc="default"> <name>Identification, Authentication, Integrity,Privacy">Privacy</name> <t> Via the GSS-API, RPCSEC_GSS can be used to identify and authenticate users on clients to servers, and servers to users. It can also perform integrity checking on the entire RPC message, including the RPC header, and on the arguments or results. Finally, privacy, usually via encryption, is a service available with RPCSEC_GSS. Privacy is performed on the arguments and results. Note that if privacy is selected, integrity, authentication, and identification are enabled. If privacy is not selected, but integrity is selected, authentication and identification are enabled. If integrity and privacy are not selected, but authentication is enabled, identification is enabled. RPCSEC_GSS does not provide identification as a separate service. </t> <t> Although GSS-API has an authentication service distinct from its privacy and integrity services, GSS-API's authentication service is not used for RPCSEC_GSS's authentication service. Instead, each RPC request and response header is integrity protected with the GSS-API integrity service, and this allows RPCSEC_GSS to offer per-RPC authentication and identity. See <xref target="RFC2203"/>format="default"/> for more information. </t> <t> NFSv4.1 client and serversMUST<bcp14>MUST</bcp14> support RPCSEC_GSS's integrity and authentication service. NFSv4.1 serversMUST<bcp14>MUST</bcp14> support RPCSEC_GSS's privacy service. NFSv4.1 clientsSHOULD<bcp14>SHOULD</bcp14> support RPCSEC_GSS's privacy service. </t> </section><!-- Identity, Authentication, Integrity, Privacy --><section anchor="security_mechs"title="Securitynumbered="true" toc="default"> <name>Security Mechanisms forNFSv4.1">NFSv4.1</name> <t> RPCSEC_GSS, via GSS-API, normalizes access to mechanisms that provide security services. Therefore, NFSv4.1 clients and serversMUST<bcp14>MUST</bcp14> support the Kerberos V5 security mechanism. </t> <t> The use of RPCSEC_GSS requires selection of mechanism, quality of protection (QOP), and service (authentication, integrity, privacy). For the mandated security mechanisms, NFSv4.1 specifies that a QOP of zero is used, leaving it up to the mechanism or the mechanism's configuration to map QOP zero to an appropriate level of protection. Each mandated mechanism specifies a minimum set of cryptographic algorithms for implementing integrity and privacy. NFSv4.1 clients and serversMUST<bcp14>MUST</bcp14> be implemented on operating environments that comply with theREQUIRED<bcp14>REQUIRED</bcp14> cryptographic algorithms of eachREQUIRED<bcp14>REQUIRED</bcp14> mechanism. </t> <section anchor="kerberosv5"title="Kerberos V5">numbered="true" toc="default"> <name>Kerberos V5</name> <t> The Kerberos V5 GSS-API mechanism as described in <xreftarget="RFC4121"/> MUSTtarget="RFC4121" format="default"/> <bcp14>MUST</bcp14> be implemented with the RPCSEC_GSS services as specified in the following table: </t><t> <figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ column descriptions: 1 == number of pseudo flavor 2 == name of pseudo flavor 3 == mechanism's OID 4 == RPCSEC_GSS service 5 == NFSv4.1 clients MUST support 6 == NFSv4.1 servers MUST support 1 2 3 4 5 6 ------------------------------------------------------------------ 390003 krb5 1.2.840.113554.1.2.2 rpc_gss_svc_none yes yes 390004 krb5i 1.2.840.113554.1.2.2 rpc_gss_svc_integrity yes yes 390005 krb5p 1.2.840.113554.1.2.2 rpc_gss_svc_privacy no yes</artwork> </figure> </t>]]></artwork> <t> Note that the number and name of the pseudo flavor are presented here as a mapping aid to the implementor. Because the NFSv4.1 protocol includes a method to negotiate security and it understands the GSS-API mechanism, the pseudo flavor is not needed. The pseudo flavor is needed for the NFSv3 since the security negotiation is done via the MOUNT protocol as described in <xreftarget="RFC2623"/>.target="RFC2623" format="default"/>. </t> <t> At the time NFSv4.1 was specified, the Advanced Encryption Standard (AES) with HMAC-SHA1 was aREQUIRED<bcp14>REQUIRED</bcp14> algorithm set for Kerberos V5. In contrast, when NFSv4.0 was specified, weaker algorithm sets wereREQUIRED<bcp14>REQUIRED</bcp14> for Kerberos V5, and wereREQUIRED<bcp14>REQUIRED</bcp14> in the NFSv4.0 specification, because the Kerberos V5 specification at the time did not specify stronger algorithms. The NFSv4.1 specification does not specifyREQUIRED<bcp14>REQUIRED</bcp14> algorithms for Kerberos V5, and instead, the implementor is expected to track the evolution of the Kerberos V5 standard if and when stronger algorithms are specified. </t> <section anchor="krb5_sec_consider"title="Securitynumbered="true" toc="default"> <name>Security Considerations for Cryptographic Algorithms in KerberosV5">V5</name> <t> When deploying NFSv4.1, the strength of the security achieved depends on the existing Kerberos V5 infrastructure. The algorithms of Kerberos V5 are not directly exposed to or selectable by the client or server, so there is some due diligence required by the user of NFSv4.1 to ensure that security is acceptable where needed. </t> </section> </section><!-- Kerberos V5 --></section><!-- Security mechanisms for NFSv4.1 --><section anchor="GSS_Server_Principal"title="GSSnumbered="true" toc="default"> <name>GSS ServerPrincipal">Principal</name> <t> Regardless of what security mechanism under RPCSEC_GSS is being used, the NFS serverMUST<bcp14>MUST</bcp14> identify itself in GSS-API via a GSS_C_NT_HOSTBASED_SERVICE name type. GSS_C_NT_HOSTBASED_SERVICE names are of the form:<figure> <artwork> service@hostname </artwork> </figure></t> <artwork name="" type="" align="left" alt=""><![CDATA[ service@hostname ]]></artwork> <t> For NFS, the "service" element is<figure> <artwork> nfs </artwork> </figure></t> <artwork name="" type="" align="left" alt=""><![CDATA[ nfs ]]></artwork> <t> Implementations of security mechanisms will convert nfs@hostname to various different forms. For Kerberos V5, the following form isRECOMMENDED: <figure> <artwork> nfs/hostname </artwork> </figure><bcp14>RECOMMENDED</bcp14>: </t> <artwork name="" type="" align="left" alt=""><![CDATA[ nfs/hostname ]]></artwork> </section><!-- GSS Server Principal --></section><!-- RPCSEC_GSS and Security Services --></section><!-- RPC Security Flavors --></section><!-- RPC-based Security --></section><!-- RPC and XDR --><section anchor="COMPOUND_and_CB_COMPOUND"title="COMPOUNDnumbered="true" toc="default"> <name>COMPOUND andCB_COMPOUND">CB_COMPOUND</name> <t> A significant departure from the versions of the NFS protocol before NFSv4 is the introduction of the COMPOUND procedure. For the NFSv4 protocol, in all minor versions, there are exactly two RPC procedures, NULL and COMPOUND. The COMPOUND procedure is defined as a series of individual operations and these operations perform the sorts of functions performed by traditional NFS procedures. </t> <t> The operations combined within a COMPOUND request are evaluated in order by the server, without any atomicity guarantees. A limited set of facilities exist to pass results from one operation to another. Once an operation returns a failing result, the evaluation ends and the results of all evaluated operations are returned to the client. </t> <t> With the use of the COMPOUND procedure, the client is able to build simple or complex requests. These COMPOUND requests allow for a reduction in the number of RPCs needed for logical file system operations. For example, multi-component look up requests can be constructed by combining multiple LOOKUP operations. Those can be further combined with operations such as GETATTR, READDIR, or OPEN plus READ to do more complicated sets of operation without incurring additional latency. </t> <t> NFSv4.1 also contains a considerable set of callback operations in which the server makes an RPC directed at the client. Callback RPCs have a similar structure to that of the normal server requests. In all minor versions of the NFSv4 protocol, there are two callback RPC procedures: CB_NULL and CB_COMPOUND. The CB_COMPOUND procedure is defined in an analogous fashion to that of COMPOUND with its own set of callback operations. </t> <t> The addition of new server and callback operations within the COMPOUND and CB_COMPOUND request framework provides a means of extending the protocol in subsequent minor versions. </t> <t> Except for a small number of operations needed for session creation, server requests and callback requests are performed within the context of a session. Sessions provide a client context for every request and support robust replay protection for non-idempotent requests. </t> </section><!-- COMPOUND and CB_COMPOUND --><section anchor="Client_Identifiers"title="Clientnumbered="true" toc="default"> <name>Client Identifiers and ClientOwners">Owners</name> <t> For each operation that obtains or depends on locking state, the specific client needs to be identifiable by the server. </t> <t> Each distinct client instance is represented by a client ID. A client ID is a 64-bit identifier representing a specific client at a given time. The client ID is changed whenever the client re-initializes, and may change when the server re-initializes. Client IDs are used to support lock identification and crash recovery. </t> <t> During steady state operation, the client ID associated with each operation is derived from the session (see <xref target="Session"/>)format="default"/>) on which the operation is sent. A session is associated with a client ID when the session is created. </t> <t> Unlike NFSv4.0, the only NFSv4.1 operations possible before a client ID is established are those needed to establish the client ID. </t> <t> A sequence of an EXCHANGE_ID operation followed by a CREATE_SESSION operation using that client ID (eir_clientid as returned from EXCHANGE_ID) is required to establish and confirm the client ID on the server. Establishment of identification by a new incarnation of the client also has the effect of immediately releasing any locking state that a previous incarnation of that same client might have had on the server. Such released state would include all byte-range lock, share reservation, layout state, and -- where the server supports neither the CLAIM_DELEGATE_PREV nor CLAIM_DELEG_CUR_FH claim types -- all delegation state associated with the same client with the same identity. For discussion of delegation state recovery, see <xref target="delegation_recovery"/>.format="default"/>. For discussion of layout state recovery, see <xref target="pnfs_client_recovery"/>.format="default"/>. </t> <t> Releasing such state requires that the server be able to determine that one client instance is the successor of another. Where this cannot be done, for any of a number of reasons, the locking state will remain for a time subject to lease expiration (see <xref target="lease_renewal"/>)format="default"/>) and the new client will need to wait for such state to be removed, if it makes conflicting lock requests. </t> <t> Client identification is encapsulated in the following client owner data type: </t><t> <figure> <artwork><sourcecode type="xdr"><![CDATA[ struct client_owner4 { verifier4 co_verifier; opaqueco_ownerid<NFS4_OPAQUE_LIMIT>;co_ownerid<NFS4_OPAQUE_LIMIT>; };</artwork> </figure> </t>]]></sourcecode> <t> The first field, co_verifier, is a client incarnation verifier, allowing the server to distinguish successive incarnations(e.g.(e.g., reboots) of the same client. The server will start the process of canceling the client's leased state if co_verifier is different than what the server has previously recorded for the identified client (as specified in the co_ownerid field). </t> <t> The second field, co_ownerid, is a variable length string that uniquely defines the client so that subsequent instances of the same client bear the same co_ownerid with a different verifier. </t> <t> There are several considerations for how the client generates the co_ownerid string:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The string should be unique so that multiple clients do not present the same string. The consequences of two clients presenting the same string range from one client getting an error to one client having its leased state abruptly and unexpectedly cancelled.</t> <t></li> <li> The string should be selected so that subsequent incarnations (e.g., restarts) of the same client cause the client to present the same string. The implementor is cautioned from an approach that requires the string to be recorded in a local file because this precludes the use of the implementation in an environment where there is no local disk and all file access is from an NFSv4.1 server.</t> <t></li> <li> The string should be the same for each server network address that the client accesses. This way, if a server has multiple interfaces, the client can trunk traffic over multiple network paths as described in <xref target="Trunking"/>.format="default"/>. (Note: the precise opposite was advised in the NFSv4.0 specification <xref target="RFC3530"/>.) </t> <t>format="default"/>.) </li> <li> The algorithm for generating the string should not assume that the client's network address will not change, unless the client implementation knows it is using statically assigned network addresses. This includes changes between client incarnations and even changes while the client is still running in its current incarnation. Thus, with dynamic address assignment, if the client includes just the client's network address in the co_ownerid string, there is a real risk that after the client gives up the network address, another client, using a similar algorithm for generating the co_ownerid string, would generate a conflicting co_ownerid string.</t> </list> </t></li> </ul> <t> Given the above considerations, an example of a well-generated co_ownerid string is one that includes: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> If applicable, the client's statically assigned network address.</t></li> <li> <t> Additional information that tends to be unique, such as one or more of:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The client machine's serial number (for privacy reasons, it is best to perform some one-way function on the serial number).</t> <t></li> <li> A Media Access Control (MAC) address (again, a one-way function should be performed).</t> <t></li> <li> The timestamp of when the NFSv4.1 software was first installed on the client (though this is subject to the previously mentioned caution about using information that is stored in a file, because the file might only be accessible over NFSv4.1).</t> <t></li> <li> A true random number. However, since this number ought to be the same between client incarnations, this shares the same problem as that of using the timestamp of the software installation.</t> </list> </t> <t></li> </ul> </li> <li> For a user-level NFSv4.1 client, it should contain additional information to distinguish the client from other user-level clients running on the same host, such as a process identifier or other unique sequence.</t> </list> </t></li> </ul> <t> The client ID is assigned by the server (the eir_clientid result from EXCHANGE_ID) and should be chosen so that it will not conflict with a client ID previously assigned by the server. This applies across server restarts. </t> <t> In the event of a server restart, a client may find out that its current client ID is no longer valid when it receives an NFS4ERR_STALE_CLIENTID error. The precise circumstances depend on the characteristics of the sessions involved, specifically whether the session is persistent (see <xref target="Persistence"/>),format="default"/>), but in each case the client will receive this error when it attempts to establish a new session with the existing client ID and receives the error NFS4ERR_STALE_CLIENTID, indicating that a new client ID needs to be obtained via EXCHANGE_ID and the new session established with that client ID. </t> <t> When a session is not persistent, the client will find out that it needs to create a new session as a result of getting an NFS4ERR_BADSESSION, since the session in question was lost as part of a server restart. When the existing client ID is presented to a server as part of creating a session and that client ID is not recognized, as would happen after a server restart, the server will reject the request with the error NFS4ERR_STALE_CLIENTID. </t> <t> In the case of the session being persistent, the client will re-establish communication using the existing session after the restart. This session will be associated with the existing client ID but may only be used to retransmit operations that the client previously transmitted and did not see replies to. Replies to operations that the server previously performed will come from the reply cache; otherwise, NFS4ERR_DEADSESSION will be returned. Hence, such a session is referred to as "dead". In this situation, in order to perform new operations, the client needs to establish a new session. If an attempt is made to establish this new session with the existing client ID, the server will reject the request with NFS4ERR_STALE_CLIENTID. </t> <t> When NFS4ERR_STALE_CLIENTID is received in either of these situations, the client needs to obtain a new client ID by use of the EXCHANGE_ID operation, then use that client ID as the basis of a new session, and then proceed to any other necessary recovery for the server restart case (see <xref target="server_failure"/>).format="default"/>). </t> <t> See the descriptions of EXCHANGE_ID (<xref target="OP_EXCHANGE_ID"/>)format="default"/>) and CREATE_SESSION (<xref target="OP_CREATE_SESSION"/>)format="default"/>) for a complete specification of these operations. </t> <sectiontitle="Upgradenumbered="true" toc="default"> <name>Upgrade from NFSv4.0 toNFSv4.1" >NFSv4.1</name> <t> To facilitate upgrade from NFSv4.0 to NFSv4.1, a server may compare a value of data type client_owner4 in an EXCHANGE_ID with a value of data type nfs_client_id4 that was established using the SETCLIENTID operation of NFSv4.0. A server that does so will allow an upgraded client to avoid waiting until the lease (i.e., the lease established by the NFSv4.0 instance client) expires. This requires that the value of data type client_owner4 be constructed the same way as the value of data type nfs_client_id4. If the latter's contents included the server's network address (per the recommendations of the NFSv4.0 specification <xref target="RFC3530"/>),format="default"/>), and the NFSv4.1 client does not wish to use a client ID that prevents trunking, it should send two EXCHANGE_ID operations. The first EXCHANGE_ID will have a client_owner4 equal to the nfs_client_id4. This will clear the state created by the NFSv4.0 client. The second EXCHANGE_ID will not have the server's network address. The state created for the second EXCHANGE_ID will not have to wait for lease expiration, because there will be no state to expire. </t> </section> <sectiontitle="Servernumbered="true" toc="default"> <name>Server Release of ClientID" >ID</name> <t> NFSv4.1 introduces a new operation called DESTROY_CLIENTID (<xref target="OP_DESTROY_CLIENTID"/>),format="default"/>), which the clientSHOULD<bcp14>SHOULD</bcp14> use to destroy a client ID it no longer needs. This permits graceful, bilateral release of a client ID. The operation cannot be used if there are sessions associated with the client ID, or state with an unexpired lease. </t> <t> If the server determines that the client holds no associated state for its client ID (associated state includes unrevoked sessions, opens, locks, delegations, layouts, and wants), the serverMAY<bcp14>MAY</bcp14> choose to unilaterally release the client ID in order to conserve resources. If the client contacts the server after this release, the serverMUST<bcp14>MUST</bcp14> ensure that the client receives the appropriate error so that it will use the EXCHANGE_ID/CREATE_SESSION sequence to establish a new client ID. The server ought to be very hesitant to release a client ID since the resulting work on the client to recover from such an event will be the same burden as if the server had failed and restarted. Typically, a server would not release a client ID unless there had been no activity from that client for many minutes. As long as there are sessions, opens, locks, delegations, layouts, or wants, the serverMUST NOT<bcp14>MUST NOT</bcp14> release the client ID. See <xref target="loss_of_session"/>format="default"/> for discussion on releasing inactive sessions. </t> </section><!-- Server Release of Client ID --><sectiontitle="Resolvinganchor="cowner_conflicts" numbered="true" toc="default"> <name>Resolving Client OwnerConflicts" anchor="cowner_conflicts">Conflicts</name> <t> When the server gets an EXCHANGE_ID for a client owner that currently has no state, or that has state but the lease has expired, the serverMUST<bcp14>MUST</bcp14> allow the EXCHANGE_ID and confirm the new client ID if followed by the appropriate CREATE_SESSION. </t> <t> When the server gets an EXCHANGE_ID for a new incarnation of a client owner that currently has an old incarnation with state and an unexpired lease, the server is allowed to dispose of the state of the previous incarnation of the client owner if one of the following is true:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The principal that created the client ID for the client owner is the same as the principal that is sending the EXCHANGE_ID operation. Note that if the client ID was created with SP4_MACH_CRED state protection (<xref target="OP_EXCHANGE_ID"/>),format="default"/>), the principalMUST<bcp14>MUST</bcp14> be based on RPCSEC_GSS authentication, the RPCSEC_GSS service usedMUST<bcp14>MUST</bcp14> be integrity or privacy, and the same GSS mechanism and principalMUST<bcp14>MUST</bcp14> be used as that used when the client ID was created.</t> <t></li> <li> The client ID was established with SP4_SSV protection (<xref target="OP_EXCHANGE_ID"/>,format="default"/>, <xref target="protect_state_change"/>)format="default"/>) and the client sends the EXCHANGE_ID with the security flavor set to RPCSEC_GSS using the GSS SSV mechanism (<xref target="ssv_mech"/>). </t> <t>format="default"/>). </li> <li> The client ID was established with SP4_SSV protection, and under the conditions described herein, the EXCHANGE_ID was sent with SP4_MACH_CRED state protection. Because the SSV might not persist across client and server restart, and because the first time a client sends EXCHANGE_ID to a server it does not have an SSV, the clientMAY<bcp14>MAY</bcp14> send the subsequent EXCHANGE_ID without an SSV RPCSEC_GSS handle. Instead, as with SP4_MACH_CRED protection, the principalMUST<bcp14>MUST</bcp14> be based on RPCSEC_GSS authentication, the RPCSEC_GSS service usedMUST<bcp14>MUST</bcp14> be integrity or privacy, and the same GSS mechanism and principalMUST<bcp14>MUST</bcp14> be used as that used when the client ID was created.</t> </list></li> </ul> <t> If none of the above situations apply, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_CLID_INUSE. </t> <t> If the server accepts the principal and co_ownerid as matching that which created the client ID, and the co_verifier in the EXCHANGE_ID differs from the co_verifier used when the client ID was created, then after the server receives a CREATE_SESSION that confirms the client ID, the server deletes state. If the co_verifier values are the same (e.g., the client either is updating properties of the client ID (<xref target="OP_EXCHANGE_ID"/>)format="default"/>) or is attempting trunking (<xref target="Trunking"/>),format="default"/>), the serverMUST NOT<bcp14>MUST NOT</bcp14> delete state. </t> </section><!-- Handling Client Owner Conflicts --></section><!-- Client Identifiers --><section anchor="Server_Owners"title="Server Owners">numbered="true" toc="default"> <name>Server Owners</name> <t> The server owner is similar to a client owner (<xref target="Client_Identifiers"/>),format="default"/>), but unlike the client owner, there is no shorthand server ID. The server owner is defined in the following data type: </t><t> <figure> <artwork><sourcecode type="xdr"><![CDATA[ struct server_owner4 { uint64_t so_minor_id; opaqueso_major_id<NFS4_OPAQUE_LIMIT>;so_major_id<NFS4_OPAQUE_LIMIT>; };</artwork> </figure> </t>]]></sourcecode> <t> The server owner is returned from EXCHANGE_ID. When the so_major_id fields are the same in two EXCHANGE_ID results, the connections that each EXCHANGE_ID were sent over can be assumed to address the same server (as defined in <xref target="intro_definitions"/>).format="default"/>). If the so_minor_id fields are also the same, then not only do both connections connect to the same server, but the session can be shared across both connections. The reader is cautioned that multiple servers may deliberately or accidentally claim to have the same so_major_id or so_major_id/so_minor_id; the reader should examine Sections <xref target="Trunking"format="counter" />format="counter"/> and <xref target="OP_EXCHANGE_ID"format="counter" />format="counter"/> in order to avoid acting on falsely matching server owner values. </t> <t> The considerations for generating an so_major_id are similar to that for generating a co_ownerid string (see <xref target="Client_Identifiers"/>).format="default"/>). The consequences of two servers generating conflicting so_major_id values are less dire than they are for co_ownerid conflicts because the client can use RPCSEC_GSS to compare the authenticity of each server (see <xref target="Trunking"/>).format="default"/>). </t> </section><!-- Server Owners --><section anchor="Security_Service_Negotiation"title="Securitynumbered="true" toc="default"> <name>Security ServiceNegotiation">Negotiation</name> <t> With the NFSv4.1 server potentially offering multiple security mechanisms, the client needs a method to determine or negotiate which mechanism is to be used for its communication with the server. The NFS server may have multiple points within its file system namespace that are available for use by NFS clients. These points can be considered security policy boundaries, and, in some NFS implementations, are tied to NFS export points. In turn, the NFS server may be configured such that each of these security policy boundaries may have different or multiple security mechanisms in use. </t> <t> The security negotiation between client and serverSHOULD<bcp14>SHOULD</bcp14> be done with a secure channel to eliminate the possibility of a third party intercepting the negotiation sequence and forcing the client and server to choose a lower level of security than required or desired. See <xref target="SECCON"/>format="default"/> for further discussion. </t> <section anchor="NFSv4_Security_Tuples"title="NFSv4.1numbered="true" toc="default"> <name>NFSv4.1 SecurityTuples">Tuples</name> <t> An NFS server can assign one or more "security tuples" to each security policy boundary in its namespace. Each security tuple consists of a security flavor (see <xref target="RPC_Security_Flavors"/>)format="default"/>) and, if the flavor is RPCSEC_GSS, a GSS-API mechanism Object Identifier (OID), a GSS-API quality of protection, and an RPCSEC_GSS service. </t> </section><!-- NFSv4.1 Security Tuples --><section anchor="SECINFO_and_SECINFO_NO_NAME"title="SECINFOnumbered="true" toc="default"> <name>SECINFO andSECINFO_NO_NAME">SECINFO_NO_NAME</name> <t> The SECINFO and SECINFO_NO_NAME operations allow the client to determine, on a per-filehandle basis, what security tuple is to be used for server access. In general, the client will not have to use either operation except during initial communication with the server or when the client crosses security policy boundaries at the server. However, the server's policies may also change at any time and force the client to negotiate a new security tuple. </t> <t> Where the use of different security tuples would affect the type of access that would be allowed if a request was sent over the same connection used for the SECINFO or SECINFO_NO_NAME operation (e.g., read-only vs. read-write) access, security tuples that allow greater access should be presented first. Where the general level of access is the same and different security flavors limit the range of principals whose privileges are recognized (e.g., allowing or disallowing root access), flavors supporting the greatest range of principals should be listed first. </t> </section><!-- SECINFO and SECINFO_NO_NAME --><section anchor="Security_Error"title="Security Error">numbered="true" toc="default"> <name>Security Error</name> <t> Based on the assumption that each NFSv4.1 client and serverMUST<bcp14>MUST</bcp14> support a minimum set of security (i.e., Kerberos V5 under RPCSEC_GSS), the NFS client will initiate file access to the server with one of the minimal security tuples. During communication with the server, the client may receive an NFS error of NFS4ERR_WRONGSEC. This error allows the server to notify the client that the security tuple currently being used contravenes the server's security policy. The client is then responsible for determining (see <xref target="using_secinfo"/>)format="default"/>) what security tuples are available at the server and choosing one that is appropriate for the client. </t> <section anchor="using_secinfo"title="Usingnumbered="true" toc="default"> <name>Using NFS4ERR_WRONGSEC, SECINFO, andSECINFO_NO_NAME">SECINFO_NO_NAME</name> <t> This section explains the mechanics of NFSv4.1 security negotiation. </t> <section anchor="putfh_series"title="Putnumbered="true" toc="default"> <name>Put FilehandleOperations">Operations</name> <t> The term "put filehandle operation" refers to PUTROOTFH, PUTPUBFH, PUTFH, and RESTOREFH. Each of the subsections herein describes how the server handles a subseries of operations that starts with a put filehandle operation. </t> <section anchor="PUTFHplusSAVEFH"title="Putnumbered="true" toc="default"> <name>Put Filehandle Operation +SAVEFH">SAVEFH</name> <t> The client is saving a filehandle for a future RESTOREFH, LINK, or RENAME. SAVEFHMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC. To determine whether or not the put filehandle operation returns NFS4ERR_WRONGSEC, the server implementation pretends SAVEFH is not in the series of operations and examines which of the situations described in the other subsections of <xreftarget="putfh_series"/>target="putfh_series" format="default"/> apply. </t> </section><!-- Put Filehandle Operation + SAVEFH --><section anchor="PUTFHplusPUTFH"title="Twonumbered="true" toc="default"> <name>Two or More Put FilehandleOperations">Operations</name> <t> For a series of N put filehandle operations, the serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC to the first N-1 put filehandle operations. The Nth put filehandle operation is handled as if it is the first in a subseries of operations. For example, if the server received a COMPOUND request with this series of operations -- PUTFH, PUTROOTFH, LOOKUP -- then the PUTFH operation is ignored for NFS4ERR_WRONGSEC purposes, and the PUTROOTFH, LOOKUP subseries is processed as according to <xreftarget="PUTFHplusLOOKUP"/>.target="PUTFHplusLOOKUP" format="default"/>. </t> </section><!-- PUTFH + PUTFH --><section anchor="PUTFHplusLOOKUP"title="Putnumbered="true" toc="default"> <name>Put Filehandle Operation + LOOKUP (or OPEN of an ExistingName)">Name)</name> <t> This situation also applies to a put filehandle operation followed by a LOOKUP or an OPEN operation that specifies an existing component name. </t> <t> In this situation, the client is potentially crossing a security policy boundary, and the set of security tuples the parent directory supports may differ from those of the child. The server implementation may decide whether to impose any restrictions on security policy administration. There are at least three approaches (sec_policy_child is the tuple set of the child export, sec_policy_parent is that of the parent). </t><t> <list style="format (%c)"> <t><ol spacing="normal" type="(%c)"> <li> sec_policy_child <= sec_policy_parent (<= for subset). This means that the set of security tuples specified on the security policy of a child directory is always a subset of its parent directory.</t> <t></li> <li> sec_policy_child ^ sec_policy_parent != {} (^ for intersection, {} for the empty set). This means that the set of security tuples specified on the security policy of a child directory always has a non-empty intersection with that of the parent.</t> <t></li> <li> sec_policy_child ^ sec_policy_parent == {}. This means that the set of security tuples specified on the security policy of a child directory may not intersect with that of the parent. In other words, there are no restrictions on how the system administrator may set up these tuples.</t> </list> </t></li> </ol> <t> In order for a server to support approaches (b) (for the case when a client chooses a flavor that is not a member of sec_policy_parent) and (c), the put filehandle operation cannot return NFS4ERR_WRONGSEC when there is a security tuple mismatch. Instead, it should be returned from the LOOKUP (or OPEN by existing component name) that follows. </t> <t> Since the above guideline does not contradict approach (a), it should be followed in general. Even if approach (a) is implemented, it is possible for the security tuple used to be acceptable for the target of LOOKUP but not for the filehandles used in the put filehandle operation. The put filehandle operation could be a PUTROOTFH or PUTPUBFH, where the client cannot know the security tuples for the root or public filehandle. Or the security policy for the filehandle used by the put filehandle operation could have changed since the time the filehandle was obtained. </t> <t> Therefore, an NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC in response to the put filehandle operation if the operation is immediately followed by a LOOKUP or an OPEN by component name. </t> </section><!-- PUTFH + LOOKUP --><section anchor="PUTFHplusLOOKUPP"title="Putnumbered="true" toc="default"> <name>Put Filehandle Operation +LOOKUPP">LOOKUPP</name> <t> Since SECINFO only works its way down, there is no way LOOKUPP can return NFS4ERR_WRONGSEC without SECINFO_NO_NAME. SECINFO_NO_NAME solves this issue via style SECINFO_STYLE4_PARENT, which works in the opposite direction as SECINFO. As with <xref target="PUTFHplusLOOKUP"/>,format="default"/>, a put filehandle operation that is followed by a LOOKUPPMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC. If the server does not support SECINFO_NO_NAME, the client's only recourse is to send the put filehandle operation, LOOKUPP, GETFH sequence of operations with every security tuple it supports. </t> <t> Regardless of whether SECINFO_NO_NAME is supported, an NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC in response to a put filehandle operation if the operation is immediately followed by a LOOKUPP. </t> </section><!-- PUTFH + LOOKUPP --><sectiontitle="Putanchor="PUTFHplusSECINFO" numbered="true" toc="default"> <name>Put Filehandle Operation +SECINFO/SECINFO_NO_NAME" anchor="PUTFHplusSECINFO">SECINFO/SECINFO_NO_NAME</name> <t> A security-sensitive client is allowed to choose a strong security tuple when querying a server to determine a file object's permitted security tuples. The security tuple chosen by the client does not have to be included in the tuple list of the security policy of either the parent directory indicated in the put filehandle operation or the child file object indicated in SECINFO (or any parent directory indicated in SECINFO_NO_NAME). Of course, the server has to be configured for whatever security tuple the client selects; otherwise, the request will fail at the RPC layer with an appropriate authentication error. </t> <t> In theory, there is no connection between the security flavor used by SECINFO or SECINFO_NO_NAME and those supported by the security policy. But in practice, the client may start looking for strong flavors from those supported by the security policy, followed by those in theREQUIRED<bcp14>REQUIRED</bcp14> set. </t> <t> The NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC to a put filehandle operation that is immediately followed by SECINFO or SECINFO_NO_NAME. The NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC from SECINFO or SECINFO_NO_NAME. </t> </section><!-- PUTFH + SECINFO --><section anchor="PUTFHplusNothing"title="Putnumbered="true" toc="default"> <name>Put Filehandle Operation +Nothing">Nothing</name> <t> The NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC. </t> </section><!-- PUTFH + Nothing --><section anchor="PUTFHplusAnythingElse"title="Putnumbered="true" toc="default"> <name>Put Filehandle Operation + AnythingElse">Else</name> <t> "Anything Else" includes OPEN by filehandle. </t> <t> The security policy enforcement applies to the filehandle specified in the put filehandle operation. Therefore, the put filehandle operationMUST<bcp14>MUST</bcp14> return NFS4ERR_WRONGSEC when there is a security tuple mismatch. This avoids the complexity of adding NFS4ERR_WRONGSEC as an allowable error to every other operation. </t> <t> A COMPOUND containing the series put filehandle operation + SECINFO_NO_NAME (style SECINFO_STYLE4_CURRENT_FH) is an efficient way for the client to recover from NFS4ERR_WRONGSEC. </t> <t> The NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC to any operation other than a put filehandle operation, LOOKUP, LOOKUPP, and OPEN (by component name). </t> </section><!-- PUTFH + Anything Else --><section anchor="aftersecinfo"title="Operationsnumbered="true" toc="default"> <name>Operations after SECINFO andSECINFO_NO_NAME">SECINFO_NO_NAME</name> <t> Suppose a client sends a COMPOUND procedure containing the series SEQUENCE, PUTFH, SECINFO_NONAME, READ, and suppose the security tuple used does not match that required for the target file. By rule (see <xreftarget="PUTFHplusSECINFO"/>),target="PUTFHplusSECINFO" format="default"/>), neither PUTFH nor SECINFO_NO_NAME can return NFS4ERR_WRONGSEC. By rule (see <xreftarget="PUTFHplusAnythingElse"/>),target="PUTFHplusAnythingElse" format="default"/>), READ cannot return NFS4ERR_WRONGSEC. The issue is resolved by the fact that SECINFO and SECINFO_NO_NAME consume the current filehandle (note that this is a change from NFSv4.0). This leaves no current filehandle for READ to use, and READ returns NFS4ERR_NOFILEHANDLE. </t> </section><!-- Operations after SECINFO and SECINFO_NO_NAME" --></section> <section anchor="link_rename"title="LINKnumbered="true" toc="default"> <name>LINK andRENAME" >RENAME</name> <t> The LINK and RENAME operations use both the current and saved filehandles. Technically, the serverMAY<bcp14>MAY</bcp14> return NFS4ERR_WRONGSEC from LINK or RENAME if the security policy of the saved filehandle rejects the security flavor used in the COMPOUND request's credentials. If the server does so, then if there is no intersection between the security policies of saved and current filehandles, this means that it will be impossible for the client to perform the intended LINK or RENAME operation. </t> <t> For example, suppose the client sends this COMPOUND request: SEQUENCE, PUTFH bFH, SAVEFH, PUTFH aFH, RENAME "c" "d", where filehandles bFH and aFH refer to different directories. Suppose no common security tuple exists between the security policies of aFH and bFH. If the client sends the request using credentials acceptable to bFH's security policy but not aFH's policy, then the PUTFH aFH operation will fail with NFS4ERR_WRONGSEC. After a SECINFO_NO_NAME request, the client sends SEQUENCE, PUTFH bFH, SAVEFH, PUTFH aFH, RENAME "c" "d", using credentials acceptable to aFH's security policy but not bFH's policy. The server returns NFS4ERR_WRONGSEC on the RENAME operation. </t> <t> To prevent a client from an endless sequence of a request containing LINK or RENAME, followed by a request containing SECINFO_NO_NAME or SECINFO, the serverMUST<bcp14>MUST</bcp14> detect when the security policies of the current and saved filehandles have no mutually acceptable security tuple, andMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC from LINK or RENAME in that situation. Instead the serverMUST<bcp14>MUST</bcp14> do one of two things:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The server can return NFS4ERR_XDEV.</t> <t></li> <li> The server can allow the security policy of the current filehandle to override that of the saved filehandle, and so return NFS4_OK.</t> </list> </t></li> </ul> </section> </section><!-- Using NFS4ERR_WRONGSEC, SECINFO, and SECINFO_NO_NAME --></section><!-- Security Error --></section><!-- Security Service Negotiation --><section anchor="minor_versioning"title="Minor Versioning">numbered="true" toc="default"> <name>Minor Versioning</name> <t> To address the requirement of an NFS protocol that can evolve as the need arises, the NFSv4.1 protocol contains the rules and framework to allow for future minor changes or versioning. </t> <t> The base assumption with respect to minor versioning is that any future accepted minor version will be documented in one or more Standards Track RFCs. Minor version 0 of the NFSv4 protocol is represented by <xref target="RFC3530"/>,format="default"/>, and minor version 1 is represented by this RFC. The COMPOUND and CB_COMPOUND procedures support the encoding of the minor version being requested by the client. </t> <t> The following items represent the basic rules for the development of minor versions. Note that a future minor version may modify or add to the following rules as part of the minor version definition.<list style='numbers'></t> <ol spacing="normal" type="1"> <li> <t> Procedures are not added or deleted.<vspace blankLines='1' /></t> <t> To maintain the general RPC model, NFSv4 minor versions will not add to or delete procedures from the NFS program. </t> </li> <li> <t> Minor versions may add operations to the COMPOUND and CB_COMPOUND procedures.<vspace blankLines='1' /></t> <t> The addition of operations to the COMPOUND and CB_COMPOUND procedures does not affect the RPC model.<list style='symbols'></t> <ul spacing="normal"> <li> <t> Minor versions may append attributes to the bitmap4 that represents sets of attributes and to the fattr4 that represents sets of attribute values.<vspace blankLines='1' /></t> <t> This allows for the expansion of the attribute model to allow for future growth or adaptation. </t> </li> <li> <t> Minor version X must append any new attributes after the last documented attribute.<vspace blankLines='1' /></t> <t> Since attribute results are specified as an opaque array of per-attribute, XDR-encoded results, the complexity of adding new attributes in the midst of the current definitions would be too burdensome. </t></list> </t></li> </ul> </li> <li> <t> Minor versions must not modify the structure of an existing operation's arguments or results.<vspace blankLines='1' /></t> <t> Again, the complexity of handling multiple structure definitions for a single operation is too burdensome. New operations should be added instead of modifying existing structures for a minor version.<vspace blankLines='1' /></t> <t> This rule does not preclude the following adaptations in a minor version:<list style='symbols'> <t></t> <ul spacing="normal"> <li> adding bits to flag fields, such as new attributes to GETATTR's bitmap4 data type, and providing corresponding variants of opaque arrays, such as a notify4 used together with such bitmaps</t> <t></li> <li> adding bits to existing attributes like ACLs that have flag words</t> <t></li> <li> extending enumerated types (including NFS4ERR_*) with new values</t> <t></li> <li> adding cases to a switched union</t> </list> </t> <t></li> </ul> </li> <li> Minor versions must not modify the structure of existing attributes.</t></li> <li> <t> Minor versions must not delete operations.<vspace blankLines='1' /></t> <t> This prevents the potential reuse of a particular operation "slot" in a future minor version. </t><t></li> <li> Minor versions must not delete attributes.</t> <t></li> <li> Minor versions must not delete flag bits or enumeration values.</t></li> <li> <t> Minor versions may declare an operationMUST NOT<bcp14>MUST NOT</bcp14> be implemented.<vspace blankLines='1' /></t> <t> Specifying that an operationMUST NOT<bcp14>MUST NOT</bcp14> be implemented is equivalent to obsoleting an operation. For the client, it means that the operationMUST NOT<bcp14>MUST NOT</bcp14> be sent to the server. For the server, an NFS error can be returned as opposed to "dropping" the request as an XDR decode error. This approach allows for the obsolescence of an operation while maintaining its structure so that a future minor version can reintroduce the operation.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> Minor versions may declare that an attributeMUST NOT<bcp14>MUST NOT</bcp14> be implemented.</t> <t></li> <li> Minor versions may declare that a flag bit or enumeration valueMUST NOT<bcp14>MUST NOT</bcp14> be implemented.</t> </list> </t> <t></li> </ol> </li> <li> Minor versions may downgrade features fromREQUIRED<bcp14>REQUIRED</bcp14> toRECOMMENDED,<bcp14>RECOMMENDED</bcp14>, orRECOMMENDED<bcp14>RECOMMENDED</bcp14> toOPTIONAL. </t> <t><bcp14>OPTIONAL</bcp14>. </li> <li> Minor versions may upgrade features fromOPTIONAL<bcp14>OPTIONAL</bcp14> toRECOMMENDED,<bcp14>RECOMMENDED</bcp14>, orRECOMMENDED<bcp14>RECOMMENDED</bcp14> toREQUIRED. </t> <t><bcp14>REQUIRED</bcp14>. </li> <li> A client and server that support minor version XSHOULD<bcp14>SHOULD</bcp14> support minor versions zero through X-1 as well.</t></li> <li> <t> Except for infrastructural changes, a minor version must not introduceREQUIRED<bcp14>REQUIRED</bcp14> new features.<vspace blankLines='1' /></t> <t> This rule allows for the introduction of new functionality and forces the use of implementation experience before designating a feature asREQUIRED.<bcp14>REQUIRED</bcp14>. On the other hand, some classes of features are infrastructural and have broad effects. Allowing infrastructural features to beRECOMMENDED<bcp14>RECOMMENDED</bcp14> orOPTIONAL<bcp14>OPTIONAL</bcp14> complicates implementation of the minor version. </t><t></li> <li> A clientMUST NOT<bcp14>MUST NOT</bcp14> attempt to use a stateid, filehandle, or similar returned object from the COMPOUND procedure with minor version X for another COMPOUND procedure with minor version Y, where X != Y.</t> </list> </t></li> </ol> </section><!-- Minor Versioning --><section anchor="Non-RPC-based_Security_Services"title="Non-RPC-Basednumbered="true" toc="default"> <name>Non-RPC-Based SecurityServices">Services</name> <t> As described in <xref target="Authentication_Integrity_Privacy"/>,format="default"/>, NFSv4.1 relies on RPC for identification, authentication, integrity, and privacy. NFSv4.1 itself provides or enables additional security services as described in the next several subsections. </t> <section anchor="Authorization"title="Authorization">numbered="true" toc="default"> <name>Authorization</name> <t> Authorization to access a file object via an NFSv4.1 operation is ultimately determined by the NFSv4.1 server. A client can predetermine its access to a file object via the OPEN (<xref target="OP_OPEN"/>)format="default"/>) and the ACCESS (<xref target="OP_ACCESS"/>)format="default"/>) operations. </t> <t> Principals with appropriate access rights can modify the authorization on a file object via the SETATTR (<xref target="OP_SETATTR"/>)format="default"/>) operation. Attributes that affect access rights include mode, owner, owner_group, acl, dacl, and sacl. See <xref target="file_attributes"/>.format="default"/>. </t> </section><!-- Authorization --><section anchor="Auditing"title="Auditing">numbered="true" toc="default"> <name>Auditing</name> <t> NFSv4.1 provides auditing on a per-file object basis, via the acl and sacl attributes as described in <xref target="acl"/>.format="default"/>. It is outside the scope of this specification to specify audit log formats or management policies. </t> </section><!-- Auditing --><section anchor="Intrusion_Detection"title="Intrusion Detection">numbered="true" toc="default"> <name>Intrusion Detection</name> <t> NFSv4.1 provides alarm control on a per-file object basis, via the acl and sacl attributes as described in <xref target="acl"/>.format="default"/>. Alarms may serve as the basis for intrusion detection. It is outside the scope of this specification to specify heuristics for detecting intrusion via alarms. </t> </section><!-- Intrusion Detection --></section><!-- Non-RPC-based Security Services --><section anchor="Transport_Layers"title="Transport Layers">numbered="true" toc="default"> <name>Transport Layers</name> <section anchor="Required_and_Recommended_Transport_Attributes"title="REQUIREDnumbered="true" toc="default"> <name><bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> Properties ofTransports">Transports</name> <t> NFSv4.1 works over Remote Direct Memory Access (RDMA) and non-RDMA-based transports with the following attributes:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The transport supports reliable delivery of data, which NFSv4.1 requires but neither NFSv4.1 nor RPC has facilities for ensuring <xref target="Chet"/>. </t> <t>format="default"/>. </li> <li> The transport delivers data in the order it was sent. Ordered delivery simplifies detection of transmit errors, and simplifies the sending of arbitrary sized requests and responses via the record marking protocol <xref target="RFC5531"/>. </t> </list> </t>format="default"/>. </li> </ul> <t> Where an NFSv4.1 implementation supports operation over the IP network protocol, any transport used between NFS and IPMUST<bcp14>MUST</bcp14> be among the IETF-approved congestion control transport protocols. At the time this document was written, the only two transports that had the above attributes were TCP and the Stream Control Transmission Protocol (SCTP). To enhance the possibilities for interoperability, an NFSv4.1 implementationMUST<bcp14>MUST</bcp14> support operation over the TCP transport protocol. </t> <t> Even if NFSv4.1 is used over a non-IP network protocol, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the transport support congestion control. </t> <t> It is permissible for a connectionless transport to be used under NFSv4.1; however, reliable and in-order delivery of data combined with congestion control by the connectionless transport isREQUIRED.<bcp14>REQUIRED</bcp14>. As a consequence, UDP by itselfMUST NOT<bcp14>MUST NOT</bcp14> be used as an NFSv4.1 transport. NFSv4.1 assumes that a client transport address and server transport address used to send data over a transport together constitute a connection, even if the underlying transport eschews the concept of a connection. </t> </section><!-- Required and Recommended Transport Attributes --><section anchor="Client_and_Server_Transport_Behavior"title="Clientnumbered="true" toc="default"> <name>Client and Server TransportBehavior">Behavior</name> <t> If a connection-oriented transport (e.g., TCP) is used, the client and serverSHOULD<bcp14>SHOULD</bcp14> use long-lived connections for at least three reasons:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> This will prevent the weakening of the transport's congestion control mechanisms via short-lived connections.</t> <t></li> <li> This will improve performance for the WAN environment by eliminating the need for connection setup handshakes.</t> <t></li> <li> The NFSv4.1 callback model differs from NFSv4.0, and requires the client and server to maintain a client-created backchannel (see <xref target="conn_chann_assoc"/>)format="default"/>) for the server to use.</t> </list> </t></li> </ol> <t> In order to reduce congestion, if a connection-oriented transport is used, and the request is not the NULL procedure:<list style='symbols'> <t></t> <ul spacing="normal"> <li> A requesterMUST NOT<bcp14>MUST NOT</bcp14> retry a request unless the connection the request was sent over was lost before the reply was received.</t> <t></li> <li> A replierMUST NOT<bcp14>MUST NOT</bcp14> silently drop a request, even if the request is a retry. (The silent drop behavior of RPCSEC_GSS <xref target="RFC2203"/>format="default"/> does not apply because this behavior happens at the RPCSEC_GSS layer, a lower layer in the request processing.) Instead, the replierSHOULD<bcp14>SHOULD</bcp14> return an appropriate error (see <xref target="Slot_Identifiers_and_Server_Reply_Cache"/>),format="default"/>), or itMAY<bcp14>MAY</bcp14> disconnect the connection.</t> </list> </t></li> </ul> <t> When sending a reply, the replierMUST<bcp14>MUST</bcp14> send the reply to the same full network address (e.g., if using an IP-based transport, the source port of the requester is part of the full network address) from which the requester sent the request. If using a connection-oriented transport, repliesMUST<bcp14>MUST</bcp14> be sent on the same connection from which the request was received. </t> <t> If a connection is dropped after the replier receives the request but before the replier sends the reply, the replier might have a pending reply. If a connection is established with the same source and destination full network address as the dropped connection, then the replierMUST NOT<bcp14>MUST NOT</bcp14> send the reply until the requester retries the request. The reason for this prohibition is that the requesterMAY<bcp14>MAY</bcp14> retry a request over a different connection (provided that connection is associated with the original request's session). </t> <t> When using RDMA transports, there are other reasons for not tolerating retries over the same connection:<list style='symbols'> <t></t> <ul spacing="normal"> <li> RDMA transports use "credits" to enforce flow control, where a credit is a right to a peer to transmit a message. If one peer were to retransmit a request (or reply), it would consume an additional credit. If the replier retransmitted a reply, it would certainly result in an RDMA connection loss, since the requester would typically only post a single receive buffer for each request. If the requester retransmitted a request, the additional credit consumed on the server might lead to RDMA connection failure unless the client accounted for it and decreased its available credit, leading to wasted resources.</t> <t></li> <li> RDMA credits present a new issue to the reply cache in NFSv4.1. The reply cache may be used when a connection within a session is lost, such as after the client reconnects. Credit information is a dynamic property of the RDMA connection, and stale values must not be replayed from the cache. This implies that the reply cache contents must not be blindly used when replies are sent from it, and credit information appropriate to the channel must be refreshed by the RPC layer.</t> </list> </t></li> </ul> <t> In addition, as described in <xref target="Retry_and_Replay"/>,format="default"/>, while a session is active, the NFSv4.1 requesterMUST NOT<bcp14>MUST NOT</bcp14> stop waiting for a reply. </t> </section><!-- Client and Server Transport Behavior --><section anchor="Ports"title="Ports">numbered="true" toc="default"> <name>Ports</name> <t> Historically, NFSv3 servers have listened over TCP port 2049. The registered port 2049 <xreftarget="RFC3232"/>target="RFC3232" format="default"/> for the NFS protocol should be the default configuration. NFSv4.1 clientsSHOULD NOT<bcp14>SHOULD NOT</bcp14> use the RPC binding protocols as described in <xreftarget="RFC1833"/>.target="RFC1833" format="default"/>. </t> </section><!-- Ports --></section><!-- Transport Layers --><section anchor="Session"title="Session">numbered="true" toc="default"> <name>Session</name> <t> NFSv4.1 clients and serversMUST<bcp14>MUST</bcp14> support andMUST<bcp14>MUST</bcp14> use the session feature as described in this section. </t> <section anchor="Motivation_and_Overview"title="Motivationnumbered="true" toc="default"> <name>Motivation andOverview">Overview</name> <t> Previous versions and minor versions of NFS have suffered from the following:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Lack of support for Exactly Once Semantics (EOS). This includes lack of support for EOS through server failure and recovery.</t> <t></li> <li> Limited callback support, including no support for sending callbacks through firewalls, and races between replies to normal requests and callbacks.</t> <t></li> <li> Limited trunking over multiple network paths.</t> <t></li> <li> Requiring machine credentials for fully secure operation.</t> </list></li> </ul> <t> Through the introduction of a session, NFSv4.1 addresses the above shortfalls with practical solutions:<list style='symbols'> <t></t> <ul spacing="normal"> <li> EOS is enabled by a reply cache with a bounded size, making it feasible to keep the cache in persistent storage and enable EOS through server failure and recovery. One reason that previous revisions of NFS did not support EOS was because some EOS approaches often limited parallelism. As will be explained in <xref target="Exactly_Once_Semantics"/>,format="default"/>, NFSv4.1 supports both EOS and unlimited parallelism.</t> <t></li> <li> The NFSv4.1 client (defined in <xreftarget="intro_definitions" />, <xref target="client_def"/>)target="client_def" format="default"/>) creates transport connections and provides them to the server to use for sending callback requests, thus solving the firewall issue (<xref target="OP_BIND_CONN_TO_SESSION"/>).format="default"/>). Races between responses from client requests and callbacks caused by the requests are detected via the session's sequencing properties that are a consequence of EOS (<xref target="sessions_callback_races"/>). </t> <t>format="default"/>). </li> <li> The NFSv4.1 client can associate an arbitrary number of connections with the session, and thus provide trunking (<xref target="Trunking"/>). </t> <t>format="default"/>). </li> <li> The NFSv4.1 client and server produce a session key independent of client and server machine credentials which can be used to compute a digest for protecting critical session management operations (<xref target="protect_state_change"/>). </t> <t>format="default"/>). </li> <li> The NFSv4.1 client can also create secure RPCSEC_GSS contexts for use by the session's backchannel that do not require the server to authenticate to a client machine principal (<xref target="Backchannel_RPC_Security"/>). </t> </list> </t>format="default"/>). </li> </ul> <t> A session is a dynamically created, long-lived server object created by a client and used over time from one or more transport connections. Its function is to maintain the server's state relative to the connection(s) belonging to a client instance. This state is entirely independent of the connection itself, and indeed the state exists whether or not the connection exists. A client may have one or more sessions associated with it so that client-associated state may be accessed using any of the sessions associated with that client's client ID, when connections are associated with those sessions. When no connections are associated with any of a client ID's sessions for an extended time, such objects as locks, opens, delegations, layouts, etc. are subject to expiration. The session serves as an object representing a means of access by a client to the associated client state on the server, independent of the physical means of access to that state. </t> <t> A single client may create multiple sessions. A single sessionMUST NOT<bcp14>MUST NOT</bcp14> serve multiple clients. </t> </section><!-- Motivation and Overview --><section anchor="NFSv4_Integration"title="NFSv4 Integration">numbered="true" toc="default"> <name>NFSv4 Integration</name> <t> Sessions are part of NFSv4.1 and not NFSv4.0. Normally, a major infrastructure change such as sessions would require a new major version number to an Open Network Computing (ONC) RPC program like NFS. However, because NFSv4 encapsulates its functionality in a single procedure, COMPOUND, and because COMPOUND can support an arbitrary number of operations, sessions have been added to NFSv4.1 with little difficulty. COMPOUND includes a minor version number field, and for NFSv4.1 this minor version is set to 1. When the NFSv4 server processes a COMPOUND with the minor version set to 1, it expects a different set of operations than it does for NFSv4.0. NFSv4.1 defines the SEQUENCE operation, which is required for every COMPOUND that operates over an established session, with the exception of some session administration operations, such as DESTROY_SESSION (<xref target="OP_DESTROY_SESSION"/>).format="default"/>). </t> <section anchor="SEQUENCE_and_CB_SEQUENCE"title="SEQUENCEnumbered="true" toc="default"> <name>SEQUENCE andCB_SEQUENCE">CB_SEQUENCE</name> <t> In NFSv4.1, when the SEQUENCE operation is present, itMUST<bcp14>MUST</bcp14> be the first operation in the COMPOUND procedure. The primary purpose of SEQUENCE is to carry the session identifier. The session identifier associates all other operations in the COMPOUND procedure with a particular session. SEQUENCE also contains required information for maintaining EOS (see <xref target="Exactly_Once_Semantics"/>).format="default"/>). Session-enabled NFSv4.1 COMPOUND requests thus have the form: </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ +-----+--------------+-----------+------------+-----------+---- | tag | minorversion | numops |SEQUENCE op | op + args | ... | | (== 1) | (limited) | + args | | +-----+--------------+-----------+------------+-----------+----</artwork> </figure>]]></artwork> <t> and the replies have the form: </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ +------------+-----+--------+-------------------------------+--// |last status | tag | numres |status + SEQUENCE op + results | // +------------+-----+--------+-------------------------------+--// //-----------------------+---- // status + op + results | ... //-----------------------+----</artwork> </figure>]]></artwork> <t> A CB_COMPOUND procedure request and reply has a similar form to COMPOUND, but instead of a SEQUENCE operation, there is a CB_SEQUENCE operation. CB_COMPOUND also has an additional field called "callback_ident", which is superfluous in NFSv4.1 andMUST<bcp14>MUST</bcp14> be ignored by the client. CB_SEQUENCE has the same information as SEQUENCE, and also includes other information needed to resolve callback races (<xref target="sessions_callback_races"/>).format="default"/>). </t> </section><!-- SEQUENCE and CB_SEQUENCE --><section anchor="Client_ID_and_Session_Association"title="Clientnumbered="true" toc="default"> <name>Client ID and SessionAssociation">Association</name> <t> Each client ID (<xref target="Client_Identifiers"/>)format="default"/>) can have zero or more active sessions. A client ID and associated session are required to perform file access in NFSv4.1. Each time a session is used (whether by a client sending a request to the server or the client replying to a callback request from the server), the state leased to its associated client ID is automatically renewed. </t> <t> State (which can consist of share reservations, locks, delegations, and layouts (<xref target="intro_locking"/>))format="default"/>)) is tied to the client ID. Client state is not tied to any individual session. Successive state changing operations from a given state ownerMAY<bcp14>MAY</bcp14> go over different sessions, provided the session is associated with the same client ID. A callbackMAY<bcp14>MAY</bcp14> arrive over a different session than that of the request that originally acquired the state pertaining to the callback. For example, if session A is used to acquire a delegation, a request to recall the delegationMAY<bcp14>MAY</bcp14> arrive over session B if both sessions are associated with the same client ID. Sections <xref target="Session_Callback_Security" format="counter"/> and <xref target="Backchannel_RPC_Security" format="counter"/> discuss the security considerations around callbacks. </t> </section><!-- Client ID and Session Association --></section><!-- NFSv4 Integration --><section anchor="Channels"title="Channels">numbered="true" toc="default"> <name>Channels</name> <t> A channel is not a connection. A channel represents the direction ONC RPC requests are sent. </t> <t> Each session has one or two channels: the fore channel and the backchannel. Because there are at most two channels per session, and because each channel has a distinct purpose, channels are not assigned identifiers. </t> <t> The fore channel is used for ordinary requests from the client to the server, and carries COMPOUND requests and responses. A session always has a fore channel. </t> <t> The backchannel is used for callback requests from server to client, and carries CB_COMPOUND requests and responses. Whether or not there is a backchannel is decided by the client; however, many features of NFSv4.1 require a backchannel. NFSv4.1 serversMUST<bcp14>MUST</bcp14> support backchannels. </t> <t> Each session has resources for each channel, including separate reply caches (see <xref target="Slot_Identifiers_and_Server_Reply_Cache"/>).format="default"/>). Note that even the backchannel requires a reply cache (or, at least, a slot table in order to detect retries) because some callback operations arenonidempotent.non-idempotent. </t> <section anchor="conn_chann_assoc"title="Associationnumbered="true" toc="default"> <name>Association of Connections, Channels, andSessions">Sessions</name> <t> Each channel is associated with zero or more transport connections (whether of the same transport protocol or different transport protocols). A connection can be associated with one channel or both channels of a session; the client and server negotiate whether a connection will carry traffic for one channel or both channels via the CREATE_SESSION (<xref target="OP_CREATE_SESSION"/>)format="default"/>) and the BIND_CONN_TO_SESSION (<xref target="OP_BIND_CONN_TO_SESSION"/>)format="default"/>) operations. When a session is created via CREATE_SESSION, the connection that transported the CREATE_SESSION request is automatically associated with the fore channel, and optionally the backchannel. If the client specifies no state protection (<xref target="OP_EXCHANGE_ID"/>)format="default"/>) when the session is created, then when SEQUENCE is transmitted on a different connection, the connection is automatically associated with the fore channel of the session specified in the SEQUENCE operation. </t> <t> A connection's association with a session is not exclusive. A connection associated with the channel(s) of one session may be simultaneously associated with the channel(s) of other sessions including sessions associated with other client IDs. </t> <t> It is permissible for connections of multiple transport types to be associated with the same channel. For example, both TCP and RDMA connections can be associated with the fore channel. In the event an RDMA and non-RDMA connection are associated with the same channel, the maximum number of slotsSHOULD<bcp14>SHOULD</bcp14> be at least one more than the total number of RDMA credits (<xref target="Slot_Identifiers_and_Server_Reply_Cache"/>).format="default"/>). This way, if all RDMA credits are used, the non-RDMA connection can have at least one outstanding request. If a server supports multiple transport types, itMUST<bcp14>MUST</bcp14> allow a client to associate connections from each transport to a channel. </t> <t> It is permissible for a connection of one type of transport to be associated with the fore channel, and a connection of a different type to be associated with the backchannel. </t> </section> </section><!-- Channels --><sectiontitle="Server Scope" anchor="Server_Scope">anchor="Server_Scope" numbered="true" toc="default"> <name>Server Scope</name> <t> Servers each specify a server scope value in the form of an opaque string eir_server_scope returned as part of the results of an EXCHANGE_ID operation. The purpose of the server scope is to allow a group of servers to indicate to clients that a set of servers sharing the same server scope value has arranged to use distinct values of opaque identifiers so that the two servers never assign the same value to two distinct objects. Thus, the identifiers generated by two servers within that set can be assumed compatible so that, in certain important cases, identifiers generated by one server in that set may be presented to another server of the same scope. </t> <t> The use of such compatible values does not imply that a value generated by one server will always be accepted by another. In most cases, it will not. However, a server will not inadvertently accept a value generated by another server. When it does accept it, it will be because it is recognized as valid and carrying the same meaning as on another server of the same scope. </t> <t> When servers are of the same server scope, this compatibility of values applies to the following identifiers:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Filehandle values. A filehandle value accepted by two servers of the same server scope denotes the same object. A WRITE operation sent to one server is reflected immediately in a READ sent to the other.</t> <t></li> <li> Server owner values. When the server scope values are the same, server owner value may be validly compared. In cases where the server scope values are different, server owner values are treated as different even if they contain identical strings of bytes.</t> </list> </t></li> </ul> <t> The coordination among servers required to provide such compatibility can be quite minimal, and limited to a simple partition of the ID space. The recognition of common values requires additional implementation, but this can be tailored to the specific situations in which that recognition is desired. </t> <t> Clients will have occasion to compare the server scope values of multiple servers under a number of circumstances, each of which will be discussed under the appropriate functional section:<list style="symbols"> <t></t> <ul spacing="normal"> <li> When server owner values received in response to EXCHANGE_ID operations sent to multiple network addresses are compared for the purpose of determining the validity of various forms of trunking, as described in <xref target="SEC11-USES-trunk"/>. . </t> <t>format="default"/>. </li> <li> When network or server reconfiguration causes the same network address to possibly be directed to different servers, with the necessity for the client to determine when lock reclaim should be attempted, as described in <xref target="reclaim_locks"/>. </t> </list> </t>format="default"/>. </li> </ul> <t> When two replies from EXCHANGE_ID, each from two different server network addresses, have the same server scope, there are a number of ways a client can validate that the common server scope is due to two servers cooperating in a group.<list style="symbols"> <t></t> <ul spacing="normal"> <li> If both EXCHANGE_ID requests were sent with RPCSEC_GSS (<xreftarget="RFC2203"/>,target="RFC2203" format="default"/>, <xreftarget="RFC5403"/>,target="RFC5403" format="default"/>, <xreftarget="RFC7861"/>)target="RFC7861" format="default"/>) authentication and the server principal is the same for both targets, the equality of server scope is validated. It isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that two servers intending to share the same server scope and server_owner major_id also share the same principal name. In some cases, this simplifies the client's task of validating server scope.</t> <t></li> <li> The client may accept the appearance of the second server in the fs_locations or fs_locations_info attribute for a relevant file system. For example, if there is a migration event for a particular file system or there are locks to be reclaimed on a particular file system, the attributes for that particular file system may be used. The client sends the GETATTR request to the first server for the fs_locations or fs_locations_info attribute with RPCSEC_GSS authentication. It may need to do this in advance of the need to verify the common server scope. If the client successfully authenticates the reply to GETATTR, and the GETATTR request and reply containing the fs_locations or fs_locations_info attribute refers to the second server, then the equality of server scope is supported. A client may choose to limit the use of this form of support to information relevant to the specific file system involved (e.g. a file system being migrated).</t> </list> </t></li> </ul> </section> <sectiontitle="Trunking" anchor="Trunking">anchor="Trunking" numbered="true" toc="default"> <name>Trunking</name> <t> Trunking is the use of multiple connections between a client and server in order to increase the speed of data transfer. NFSv4.1 supports two types of trunking: session trunking and client ID trunking. </t> <t> In the context of a single server network address, it can be assumed that all connections are accessing the sameserverserver, and NFSv4.1 serversMUST<bcp14>MUST</bcp14> support both forms of trunking. When multiple connections use a set of network addressesaccessingto access the same server, the serverMUST<bcp14>MUST</bcp14> support both forms of trunking. NFSv4.1 servers in a clustered configurationMAY<bcp14>MAY</bcp14> allow network addresses for different servers to use client ID trunking. </t> <t> Clients may use either form of trunking as long as they do not, when trunking between different server network addresses, violate the servers' mandates as to the kinds of trunking to be allowed (see below). With regard to callback channels, the clientMUST<bcp14>MUST</bcp14> allow the server to choose among all callback channels valid for a given client ID andMUST<bcp14>MUST</bcp14> support trunking when the connections supporting the backchannel allow session or client ID trunking to be used for callbacks. </t> <t> Session trunking is essentially the association of multiple connections, each with potentially different target and/or source network addresses, to the same session. When the target network addresses (server addresses) of the two connections are the same, the serverMUST<bcp14>MUST</bcp14> support such session trunking. When the target network addresses are different, the serverMAY<bcp14>MAY</bcp14> indicate such support using the data returned by the EXCHANGE_ID operation (see below). </t> <t> Client ID trunking is the association of multiple sessions to the same client ID. ServersMUST<bcp14>MUST</bcp14> support client ID trunking for two target network addresses whenever they allow session trunking for those same two network addresses. In addition, a serverMAY,<bcp14>MAY</bcp14>, by presenting the same major server owner ID (<xref target="Server_Owners"/>)format="default"/>) and server scope (<xref target="Server_Scope"/>),format="default"/>), allow an additional case of client ID trunking. When two servers return the same major server owner and server scope, it means that the two servers are cooperating on locking state management, which is a prerequisite for client ID trunking. </t> <t> Distinguishing when the client is allowed to use session and client ID trunking requires understanding how the results of the EXCHANGE_ID (<xref target="OP_EXCHANGE_ID"/>)format="default"/>) operation identify a server. Suppose a client sends EXCHANGE_IDs over two different connections, each with a possibly different target network address, but each EXCHANGE_ID operation has the same value in the eia_clientowner field. If the same NFSv4.1 server is listening over each connection, then each EXCHANGE_ID resultMUST<bcp14>MUST</bcp14> return the same values of eir_clientid, eir_server_owner.so_major_id, and eir_server_scope. The client can then treat each connection as referring to the same server (subject to verification; see <xref target="PREP-trunk-verify"/>format="default"/> below), and it can use each connection to trunk requests and replies. The client's choice is whether session trunking or client ID trunking applies.<list style="hanging"> <t hangText="Session Trunking."></t> <dl newline="false" spacing="normal"> <dt>Session Trunking.</dt> <dd> <t> If the eia_clientowner argument is the same in two different EXCHANGE_ID requests, and the eir_clientid, eir_server_owner.so_major_id, eir_server_owner.so_minor_id, and eir_server_scope results match in both EXCHANGE_ID results, then the client is permitted to perform session trunking. If the client has no session mapping to the tuple of eir_clientid, eir_server_owner.so_major_id, eir_server_scope, and eir_server_owner.so_minor_id, then it creates the session via a CREATE_SESSION operation over one of the connections, which associates the connection to the session. If there is a session for the tuple, the client can send BIND_CONN_TO_SESSION to associate the connection to the session.<vspace blankLines='1' /></t> <t> Of course, if the client does not desire to use session trunking, it is not required to do so. It can invoke CREATE_SESSION on the connection. This will result in client ID trunking as described below. It can also decide to drop the connection if it does not choose to use trunking.<vspace blankLines='1' /></t><t hangText="Client</dd> <dt>Client IDTrunking.">Trunking.</dt> <dd> <t> If the eia_clientowner argument is the same in two different EXCHANGE_ID requests, and the eir_clientid, eir_server_owner.so_major_id, and eir_server_scope results match in both EXCHANGE_ID results, then the client is permitted to perform client ID trunking (regardless of whether the eir_server_owner.so_minor_id results match). The client can associate each connection with different sessions, where each session is associated with the same server.<vspace blankLines='1' /></t> <t> The client completes the act of client ID trunking by invoking CREATE_SESSION on each connection, using the same client ID that was returned in eir_clientid. These invocations create two sessions and also associate each connection with its respective session. The client is free to decline to use client ID trunking by simply dropping the connection at this point.<vspace blankLines='1' /></t> <t> When doing client ID trunking, locking state is shared across sessions associated with that same client ID. This requires the server to coordinate state across sessions and the client to be able to associate the same locking state with multiple sessions. </t></list> </t></dd> </dl> <t> It is always possible that, as a result of various sorts of reconfiguration events, eir_server_scope and eir_server_owner values may be different on subsequent EXCHANGE_ID requests made to the same network address. </t> <t> In mostcasescases, such reconfiguration events will be disruptive and indicate that an IP address formerly connected to one server is now connected to an entirely different one. </t> <t> Some guidelines on client handling of such situations follow:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> When eir_server_scope changes, the client has no assurance that anyid'sIDs that it obtained previously(e.g. file handles)(e.g., filehandles) can be validly used on the new server, and, even if the new server accepts them, there is no assurance that this is not due to accident. Thus, it is best to treat all such state aslost/stalelost or stale, although a client may assume that the probability of inadvertent acceptance is low and treat this situation as within the next case.</t> <t></li> <li> When eir_server_scope remains the same and eir_server_owner.so_major_id changes, the client can use the filehandles it has, consider its locking state lost, and attempt to reclaim or otherwise re-obtain its locks. It might find that itsfile handlefilehandle is now stale. However, if NFS4ERR_STALE is not returned, it can proceed to reclaim or otherwise re-obtain its open locking state.</t> <t></li> <li> When eir_server_scope and eir_server_owner.so_major_id remain the same, the client has to use the now-current values of eir_server_owner.so_minor_id in deciding on appropriate forms of trunking. This may result in connections being dropped or new sessions being created.</t> </list> </t></li> </ul> <sectiontitle="Verifyinganchor="PREP-trunk-verify" numbered="true" toc="default"> <name>Verifying Claims of Matching ServerIdentity" anchor="PREP-trunk-verify">Identity</name> <t> When the server responds using two different connectionsclaimingthat claim matching or partially matching eir_server_owner, eir_server_scope, and eir_clientid values, the client does not have to trust the servers' claims. The client may verify these claims before trunking traffic in the following ways:<list style='symbols'></t> <ul spacing="normal"> <li> <t> For session trunking, clientsSHOULD<bcp14>SHOULD</bcp14> reliably verify if connections between different network paths are in fact associated with the same NFSv4.1 server and usable on the same session, and serversMUST<bcp14>MUST</bcp14> allow clients to perform reliable verification. When a client ID is created, the clientSHOULD<bcp14>SHOULD</bcp14> specify that BIND_CONN_TO_SESSION is to be verified according to the SP4_SSV or SP4_MACH_CRED (<xref target="OP_EXCHANGE_ID"/>)format="default"/>) state protection options. For SP4_SSV, reliable verification depends on a shared secret (the SSV) that is established via the SET_SSV (see <xref target="OP_SET_SSV"/>)format="default"/>) operation.<vspace blankLines='1' /></t> <t> When a new connection is associated with the session (via the BIND_CONN_TO_SESSION operation, see <xref target="OP_BIND_CONN_TO_SESSION"/>),format="default"/>), if the client specified SP4_SSV state protection for the BIND_CONN_TO_SESSION operation, the clientMUST<bcp14>MUST</bcp14> send the BIND_CONN_TO_SESSION with RPCSEC_GSS protection, using integrity or privacy, and an RPCSEC_GSS handle created with the GSS SSV mechanism (see <xref target="ssv_mech"/>). <vspace blankLines='1' />format="default"/>). </t> <t> If the client mistakenly tries to associate a connection to a session of a wrong server, the server will either reject the attempt because it is not aware of the session identifier of the BIND_CONN_TO_SESSION arguments, or it will reject the attempt because the RPCSEC_GSS authentication fails. Even if the server mistakenly or maliciously accepts the connection association attempt, the RPCSEC_GSS verifier it computes in the response will not be verified by the client, so the client will know it cannot use the connection for trunking the specified session.<vspace blankLines='1' /></t> <t> If the client specified SP4_MACH_CRED state protection, the BIND_CONN_TO_SESSION operation will use RPCSEC_GSS integrity or privacy, using the same credential that was used when the client ID was created. Mutual authentication via RPCSEC_GSS assures the client that the connection is associated with the correct session of the correct server.<vspace blankLines='1' /></t> </li> <li> <t> For client ID trunking, the client has at least two options for verifying that the same client ID obtained from two different EXCHANGE_ID operations came from the same server. The first option is to use RPCSEC_GSS authentication when sending each EXCHANGE_ID operation. Each time an EXCHANGE_ID is sent with RPCSEC_GSS authentication, the client notes the principal name of the GSS target. If the EXCHANGE_ID results indicate that client ID trunking is possible, and the GSS targets' principal names are the same, the servers are the same and client ID trunking is allowed.<vspace blankLines='1' /></t> <t> The second option for verification is to use SP4_SSV protection. When the client sends EXCHANGE_ID, it specifies SP4_SSV protection. The first EXCHANGE_ID the client sends always has to be confirmed by a CREATE_SESSION call. The client then sends SET_SSV. Later, the client sends EXCHANGE_ID to a second destination network address different from the one the first EXCHANGE_ID was sent to. The client checks that each EXCHANGE_ID reply has the same eir_clientid, eir_server_owner.so_major_id, and eir_server_scope. If so, the client verifies the claim by sending a CREATE_SESSION operation to the second destination address, protected with RPCSEC_GSS integrity using an RPCSEC_GSS handle returned by the second EXCHANGE_ID. If the server accepts the CREATE_SESSION request, and if the client verifies the RPCSEC_GSS verifier and integrity codes, then the client has proof the second server knows the SSV, and thus the two servers are cooperating for the purposes of specifying server scope and client ID trunking. </t></list> </t></li> </ul> </section> </section> <section anchor="Exactly_Once_Semantics"title="Exactlynumbered="true" toc="default"> <name>Exactly OnceSemantics">Semantics</name> <t> Via the session, NFSv4.1 offers exactly once semantics (EOS) for requests sent over a channel. EOS is supported on both the fore channel and backchannel. </t> <t> Each COMPOUND or CB_COMPOUND request that is sent with a leading SEQUENCE or CB_SEQUENCE operationMUST<bcp14>MUST</bcp14> be executed by the receiver exactly once. This requirement holds regardless of whether the request is sent with reply caching specified (see <xref target="optional_reply_caching"/>).format="default"/>). The requirement holds even if the requester is sending the request over a session created between a pNFS data client and pNFS data server. To understand the rationale for this requirement, divide the requests into three classifications:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Non-idempotent requests.</t> <t></li> <li> Idempotent modifying requests.</t> <t></li> <li> Idempotent non-modifying requests.</t> </list></li> </ul> <t> An example of a non-idempotent request is RENAME. Obviously, if a replier executes the same RENAME request twice, and the first execution succeeds, the re-execution will fail. If the replier returns the result from the re-execution, this result is incorrect. Therefore, EOS is required for non-idempotent requests. </t> <t> An example of an idempotent modifying request is a COMPOUND request containing a WRITE operation. Repeated execution of the same WRITE has the same effect as execution of that WRITE a single time. Nevertheless, enforcing EOS for WRITEs and other idempotent modifying requests is necessary to avoid data corruption. </t> <t> Suppose a client sends WRITE A to a noncompliant server that does not enforce EOS, and receives no response, perhaps due to a network partition. The client reconnects to the server and re-sends WRITE A. Now, the server has outstanding two instances of A. The server can be in a situation in which it executes and replies to the retry of A, while the first A is still waiting in the server's internal I/O system for some resource. Upon receiving the reply to the second attempt of WRITE A, the client believes its WRITE is done so it is free to send WRITE B, which overlaps the byte-range of A. When the original A is dispatched from the server's I/O system and executed (thus the second time A will have been written), then what has been written by B can be overwritten and thus corrupted. </t> <t> An example of an idempotent non-modifying request is a COMPOUND containing SEQUENCE, PUTFH, READLINK, and nothing else. The re-execution of such a request will not cause data corruption or produce an incorrect result. Nonetheless, to keep the implementation simple, the replierMUST<bcp14>MUST</bcp14> enforce EOS for all requests, whether or not idempotent and non-modifying. </t> <t> Note that true and complete EOS is not possible unless the server persists the reply cache in stable storage, and unless the server is somehow implemented to never require a restart (indeed, if such a server exists, the distinction between a reply cache kept in stable storage versus one that is not is one without meaning). See <xref target="Persistence"/>format="default"/> for a discussion of persistence in the reply cache. Regardless, even if the server does not persist the reply cache, EOS improves robustness and correctness over previous versions of NFS because the legacy duplicate request/reply caches were based on the ONC RPC transaction identifier (XID). <xref target="Slot_Identifiers_and_Server_Reply_Cache"/>format="default"/> explains the shortcomings of the XID as a basis for a reply cache and describes how NFSv4.1 sessions improve upon the XID. </t> <section anchor="Slot_Identifiers_and_Server_Reply_Cache"title="Slotnumbered="true" toc="default"> <name>Slot Identifiers and ReplyCache">Cache</name> <t> The RPC layer provides a transaction ID (XID), which, while required to be unique, is not convenient for tracking requests for two reasons. First, the XID is only meaningful to the requester; it cannot be interpreted by the replier except to test for equality with previously sent requests. When consulting an RPC-based duplicate request cache, the opaqueness of the XID requires a computationally expensive look up (often via a hash that includes XID and source address). NFSv4.1 requests use a non-opaque slot ID, which is an index into a slot table, which is far more efficient. Second, because RPC requests can be executed by the replier in any order, there is no bound on the number of requests that may be outstanding at any time. To achieve perfect EOS, using ONC RPC would require storing all replies in the reply cache. XIDs are 32 bits; storing over four billion(2^32)(2<sup>32</sup>) replies in the reply cache is not practical. In practice, previous versions of NFS have chosen to store a fixed number of replies in the cache, and to use a least recently used (LRU) approach to replacing cache entries with new entries when the cache is full. In NFSv4.1, the number of outstanding requests is bounded by the size of the slot table, and a sequence ID per slot is used to tell the replier when it is safe to delete a cached reply. </t> <t> In the NFSv4.1 reply cache, when the requester sends a new request, it selects a slot ID in the range 0..N, where N is the replier's current maximum slot ID granted to the requester on the session over which the request is to be sent. The value of N starts out as equal to ca_maxrequests - 1 (<xref target="OP_CREATE_SESSION"/>),format="default"/>), but can be adjusted by the response to SEQUENCE or CB_SEQUENCE as described later in this section. The slot ID must be unused by any of the requests that the requester has already active on the session. "Unused" here means the requester has no outstanding request for that slot ID. </t> <t> A slot contains a sequence ID and the cached reply corresponding to the request sent with that sequence ID. The sequence ID is a 32-bit unsigned value, and is therefore in the range 0..0xFFFFFFFF(2^32(2<sup>32</sup> - 1). The first time a slot is used, the requesterMUST<bcp14>MUST</bcp14> specify a sequence ID of one (<xref target="OP_CREATE_SESSION"/>).format="default"/>). Each time a slot is reused, the requestMUST<bcp14>MUST</bcp14> specify a sequence ID that is one greater than that of the previous request on the slot. If the previous sequence ID was 0xFFFFFFFF, then the next request for the slotMUST<bcp14>MUST</bcp14> have the sequence ID set to zero (i.e.,(2^32(2<sup>32</sup> - 1) + 1 mod2^32).2<sup>32</sup>). </t> <t> The sequence ID accompanies the slot ID in each request. It is for the critical check at the replier: it used to efficiently determine whether a request using a certain slot ID is a retransmit or a new, never-before-seen request. It is not feasible for the requester to assert that it is retransmitting to implement this, because for any given request the requester cannot know whether the replier has seen it unless the replier actually replies. Of course, if the requester has seen the reply, the requester would not retransmit. </t> <t> The replier compares each received request's sequence ID with the last one previously received for that slot ID, to see if the new request is: </t><t> <list style="symbols"> <t><ul spacing="normal"> <li> A new request, in which the sequence ID is one greater than that previously seen in the slot (accounting for sequence wraparound). The replier proceeds to execute the new request, and the replierMUST<bcp14>MUST</bcp14> increase the slot's sequence ID by one.</t> <t></li> <li> A retransmitted request, in which the sequence ID is equal to that currently recorded in the slot. If the original request has executed to completion, the replier returns the cached reply. See <xref target="Retry_and_Replay"/>format="default"/> for direction on how the replier deals with retries of requests that are still in progress.</t> <t></li> <li> A misordered retry, in which the sequence ID is less than (accounting for sequence wraparound) that previously seen in the slot. The replierMUST<bcp14>MUST</bcp14> return NFS4ERR_SEQ_MISORDERED (as the result from SEQUENCE or CB_SEQUENCE).</t> <t></li> <li> A misordered new request, in which the sequence ID is two or more than (accounting for sequence wraparound) that previously seen in the slot. Note that because the sequence IDMUST<bcp14>MUST</bcp14> wrap around to zero once it reaches 0xFFFFFFFF, a misordered new request and a misordered retry cannot be distinguished. Thus, the replierMUST<bcp14>MUST</bcp14> return NFS4ERR_SEQ_MISORDERED (as the result from SEQUENCE or CB_SEQUENCE).</t> </list> </t></li> </ul> <t> Unlike the XID, the slot ID is always within a specific range; this has two implications. The first implication is that for a given session, the replier need only cache the results of a limited number of COMPOUND requests. The second implication derives from the first, which is that unlike XID-indexed reply caches (also known as duplicate request caches - DRCs), the slot ID-based reply cache cannot be overflowed. Through use of the sequence ID to identify retransmitted requests, the replier does not need to actually cache the request itself, reducing the storage requirements of the reply cache further. These facilities make it practical to maintain all the required entries for an effective reply cache. </t> <t> The slot ID, sequence ID, and session ID therefore take over the traditional role of the XID and source network address in the replier's reply cache implementation. This approach is considerably more portable and completely robust -- it is not subject to the reassignment of ports as clients reconnect over IP networks. In addition, the RPC XID is not used in the reply cache, enhancing robustness of the cache in the face of any rapid reuse of XIDs by the requester. While the replier does not care about the XID for the purposes of reply cache management (but the replierMUST<bcp14>MUST</bcp14> return the same XID that was in the request), nonetheless there are considerations for the XID in NFSv4.1 that are the same as all other previous versions of NFS. The RPC XID remains in each message and needs to be formulated in NFSv4.1 requests as in any other ONC RPC request. The reasons include:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The RPC layer retains its existing semantics and implementation.</t> <t></li> <li> The requester and replier must be able to interoperate at the RPC layer, prior to the NFSv4.1 decoding of the SEQUENCE or CB_SEQUENCE operation.</t> <t></li> <li> If an operation is being used that does not start with SEQUENCE or CB_SEQUENCE (e.g., BIND_CONN_TO_SESSION), then the RPC XID is needed for correct operation to match the reply to the request.</t> <t></li> <li> The SEQUENCE or CB_SEQUENCE operation may generate an error. If so, the embedded slot ID, sequence ID, and session ID (if present) in the request will not be in the reply, and the requester has only the XID to match the reply to the request.</t> </list> </t></li> </ul> <t> Given that well-formulated XIDs continue to be required, this raises the question: why do SEQUENCE and CB_SEQUENCE replies have a session ID, slot ID, and sequence ID? Having the session ID in the reply means that the requester does not have to use the XID to look up the session ID, which would be necessary if the connection were associated with multiple sessions. Having the slot ID and sequence ID in the reply means that the requester does not have to use the XID to look up the slot ID and sequence ID. Furthermore, since the XID is only 32 bits, it is too small to guarantee the re-association of a reply with its request <xref target="rpc_xid_issues"/>;format="default"/>; having session ID, slot ID, and sequence ID in the reply allows the client to validate that the reply in fact belongs to the matched request. </t> <t> The SEQUENCE (and CB_SEQUENCE) operation also carries a "highest_slotid" value, which carries additional requester slot usage information. The requesterMUST<bcp14>MUST</bcp14> always indicate the slot ID representing the outstanding request with the highest-numbered slot value. The requester should in all cases provide the most conservative value possible, although it can be increased somewhat above the actual instantaneous usage to maintain some minimum or optimal level. This provides a way for the requester to yield unused request slots back to the replier, which in turn can use the information to reallocate resources. </t> <t> The replier responds with both a new target highest_slotid and an enforced highest_slotid, described as follows:<list style="symbols"></t> <ul spacing="normal"> <li> <t> The target highest_slotid is an indication to the requester of the highest_slotid the replier wishes the requester to be using. This permits the replier to withdraw (or add) resources from a requester that has been found to not be using them, in order to more fairly share resources among a varying level of demand from other requesters. The requester must always comply with the replier's value updates, since they indicate newly established hard limits on the requester's access to session resources. However, because of request pipelining, the requester may have active requests in flight reflecting prior values; therefore, the replier must not immediately require the requester to comply.<vspace blankLines='1' /></t> </li> <li> <t> The enforced highest_slotid indicates the highest slot ID the requester is permitted to use on a subsequent SEQUENCE or CB_SEQUENCE operation. The replier's enforced highest_slotidSHOULD<bcp14>SHOULD</bcp14> be no less than the highest_slotid the requester indicated in the SEQUENCE or CB_SEQUENCE arguments.<vspace blankLines='1' /></t> <t> A requester can be intransigent with respect to lowering its highest_slotid argument to a Sequence operation, i.e. the requester continues to ignore the target highest_slotid in the response to a Sequence operation, and continues to set its highest_slotid argument to be higher than the target highest_slotid. This can be considered particularly egregious behavior when the replier knows there are no outstanding requests with slot IDs higher than its target highest_slotid. When faced with such intransigence, the replier is free to take more forceful action, andMAY<bcp14>MAY</bcp14> reply with a new enforced highest_slotid that is less than its previous enforced highest_slotid. Thereafter, if the requester continues to send requests with a highest_slotid that is greater than the replier's new enforced highest_slotid, the serverMAY<bcp14>MAY</bcp14> return NFS4ERR_BAD_HIGH_SLOT, unless the slot ID in the request is greater than the new enforced highest_slotid and the request is a retry.<vspace blankLines='1' /></t> <t> The replierSHOULD<bcp14>SHOULD</bcp14> retain the slots it wants to retire until the requester sends a request with a highest_slotid less than or equal to the replier's new enforced highest_slotid.<vspace blankLines='1' /></t> <t> The requester can also be intransigent with respect to sending non-retry requests that have a slot ID that exceeds the replier's highest_slotid. Once the replier has forcibly lowered the enforced highest_slotid, the requester is only allowed to send retries on slots that exceed the replier's highest_slotid. If a request is received with a slot ID that is higher than the new enforced highest_slotid, and the sequence ID is one higher than what is in the slot's reply cache, then the server can both retire the slot and return NFS4ERR_BADSLOT (however, the serverMUST NOT<bcp14>MUST NOT</bcp14> do one and not the other). The reason it is safe to retire the slot is because by using the next sequence ID, the requester is indicating it has received the previous reply for the slot.<vspace blankLines='1' /></t><t></li> <li> The requesterSHOULD<bcp14>SHOULD</bcp14> use the lowest available slot when sending a new request. This way, the replier may be able to retire slot entries faster. However, where the replier is actively adjusting its granted highest_slotid, it will not be able to use only the receipt of the slot ID and highest_slotid in the request. Neither the slot ID nor the highest_slotid used in a request may reflect the replier's current idea of the requester's session limit, because the request may have been sent from the requester before the update was received. Therefore, in the downward adjustment case, the replier may have to retain a number of reply cache entries at least as large as the old value of maximum requests outstanding, until it can infer that the requester has seen a reply containing the new granted highest_slotid. The replier can infer that the requester has seen such a reply when it receives a new request with the same slot ID as the request replied to and the next higher sequence ID.</t> </list> </t></li> </ul> <sectiontitle="Cachinganchor="cacheseq" numbered="true" toc="default"> <name>Caching of SEQUENCE and CB_SEQUENCEReplies" anchor="cacheseq">Replies</name> <t> When a SEQUENCE or CB_SEQUENCE operation is successfully executed, its replyMUST<bcp14>MUST</bcp14> always be cached. Specifically, session ID, sequence ID, and slot IDMUST<bcp14>MUST</bcp14> be cached in the reply cache. The reply from SEQUENCE also includes the highest slot ID, target highest slot ID, and status flags. Instead of caching these values, the serverMAY<bcp14>MAY</bcp14> re-compute the values from the current state of the fore channel, session, and/or client ID as appropriate. Similarly, the reply from CB_SEQUENCE includes a highest slot ID and target highest slot ID. The clientMAY<bcp14>MAY</bcp14> re-compute the values from the current state of the session as appropriate. </t> <t> Regardless of whether or not a replier is re-computing highest slot ID, target slot ID, and status on replies to retries, the requesterMUST NOT<bcp14>MUST NOT</bcp14> assume that the values are being re-computed whenever it receives a reply after a retry is sent, since it has no way of knowing whether the reply it has received was sent by the replier in response to the retry or is a delayed response to the original request. Therefore, it may be the case that highest slot ID, target slot ID, or status bits may reflect the state of affairs when the request was first executed. Although acting based on such delayed information is valid, it may cause the receiver of the reply to do unneeded work. RequestersMAY<bcp14>MAY</bcp14> choose to send additional requests to get the current state of affairs or use the state of affairs reported by subsequent requests, in preference to acting immediately on data that might be out of date. </t> </section> <sectiontitle="Errorsanchor="err_sequence" numbered="true" toc="default"> <name>Errors from SEQUENCE andCB_SEQUENCE" anchor="err_sequence">CB_SEQUENCE</name> <t> Any time SEQUENCE or CB_SEQUENCE returns an error, the sequence ID of the slotMUST NOT<bcp14>MUST NOT</bcp14> change. The replierMUST NOT<bcp14>MUST NOT</bcp14> modify the reply cache entry for the slot whenever an error is returned from SEQUENCE or CB_SEQUENCE. </t> </section><!-- Errors from SEQUENCE and CB_SEQUENCE --><sectiontitle="Optionalanchor="optional_reply_caching" numbered="true" toc="default"> <name>Optional ReplyCaching" anchor="optional_reply_caching">Caching</name> <t> On a per-request basis, the requester can choose to direct the replier to cache the reply to all operations after the first operation (SEQUENCE or CB_SEQUENCE) via the sa_cachethis or csa_cachethis fields of the arguments to SEQUENCE or CB_SEQUENCE. The reason it would not direct the replier to cache the entire reply is that the request is composed of all idempotent operations <xref target="Chet"/>.format="default"/>. Caching the reply may offer little benefit. If the reply is too large (see <xref target="COMPOUND_Sizing_Issues"/>),format="default"/>), it may not be cacheable anyway. Even if the reply to idempotent request is small enough to cache, unnecessarily caching the reply slows down the server and increases RPC latency. </t> <t> Whether or not the requester requests the reply to be cached has no effect on the slot processing. If the result of SEQUENCE or CB_SEQUENCE is NFS4_OK, then the slot's sequence IDMUST<bcp14>MUST</bcp14> be incremented by one. If a requester does not direct the replier to cache the reply, the replierMUST<bcp14>MUST</bcp14> do one of following:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The replier can cache the entire original reply. Even though sa_cachethis or csa_cachethis is FALSE, the replier is always free to cache. It may choose this approach in order to simplify implementation.</t></li> <li> <t> The replier enters into its reply cache a reply consisting of the original results to the SEQUENCE or CB_SEQUENCE operation, and with the next operation in COMPOUND or CB_COMPOUND having the error NFS4ERR_RETRY_UNCACHED_REP. Thus, if the requester later retries the request, it will get NFS4ERR_RETRY_UNCACHED_REP. If a replier receives a retried Sequence operation where the reply to the COMPOUND or CB_COMPOUND was not cached, then the replier,<list style='symbols'> <t> MAY</t> <ul spacing="normal"> <li> <bcp14>MAY</bcp14> return NFS4ERR_RETRY_UNCACHED_REP in reply to a Sequence operation if the Sequence operation is not the first operation (granted, a requester that does so is in violation of the NFSv4.1 protocol).</t> <t> MUST NOT</li> <li> <bcp14>MUST NOT</bcp14> return NFS4ERR_RETRY_UNCACHED_REP in reply to a Sequence operation if the Sequence operation is the first operation.</t> </list> </t> <t></li> </ul> </li> <li> If the second operation is an illegal operation, or an operation that was legal in a previous minor version of NFSv4 andMUST NOT<bcp14>MUST NOT</bcp14> be supported in the current minor version (e.g., SETCLIENTID), the replierMUST NOT<bcp14>MUST NOT</bcp14> ever return NFS4ERR_RETRY_UNCACHED_REP. Instead the replierMUST<bcp14>MUST</bcp14> return NFS4ERR_OP_ILLEGAL or NFS4ERR_BADXDR or NFS4ERR_NOTSUPP as appropriate.</t> <t></li> <li> If the second operation can result in another error status, the replierMAY<bcp14>MAY</bcp14> return a status other than NFS4ERR_RETRY_UNCACHED_REP, provided the operation is not executed in such a way that the state of the replier is changed. Examples of such an error status include: NFS4ERR_NOTSUPP returned for an operation that is legal but notREQUIRED<bcp14>REQUIRED</bcp14> in the current minor versions, and thus not supported by the replier; NFS4ERR_SEQUENCE_POS; and NFS4ERR_REQ_TOO_BIG.</t> </list> </t></li> </ul> <t> The discussion above assumes that the retried request matches the original one. <xreftarget="false_retry"/>target="false_retry" format="default"/> discusses what the replier might do, andMUST<bcp14>MUST</bcp14> do when original and retried requests do not match. Since the replier may only cache a small amount of the information that would be required to determine whether this is a case of a false retry, the replier may send to the client any of the following responses:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The cached reply to the original request (if the replier has cached it in its entirety and the users of the original request and retry match).</t> <t></li> <li> A reply that consists only of the Sequence operation with the errorNFS4ERR_FALSE_RETRY. </t> <t>NFS4ERR_SEQ_FALSE_RETRY. </li> <li> A reply consisting of the response to Sequence with the status NFS4_OK, together with the second operation as it appeared in the retried request with an error of NFS4ERR_RETRY_UNCACHED_REP or other error as described above.</t> <t></li> <li> A reply that consists of the response to Sequence with the status NFS4_OK, together with the second operation as it appeared in the original request with an error of NFS4ERR_RETRY_UNCACHED_REP or other error as described above.</t> </list> </t></li> </ul> <section anchor="false_retry"title="False Retry">numbered="true" toc="default"> <name>False Retry</name> <t> If a requester sent a Sequence operation with a slot ID and sequence ID that are in the reply cache but the replier detected that the retried request is not the same as the original request, including a retry that has different operations or different arguments in the operations from the original and a retry that uses a different principal in the RPC request's credential field that translates to a different user, then this is a false retry. When the replier detects a false retry, it is permitted (but not always obligated) to returnNFS4ERR_FALSE_RETRYNFS4ERR_SEQ_FALSE_RETRY in response to the Sequence operation when it detects a false retry. </t> <t> Translations of particularly privileged user values to other users due to the lack of appropriately secure credentials, as configured on the replier, should be applied before determining whether the users are the same or different. If the replier determines the users are different between the original request and a retry, then the replierMUST<bcp14>MUST</bcp14> returnNFS4ERR_FALSE_RETRY.NFS4ERR_SEQ_FALSE_RETRY. </t> <t> If an operation of the retry is an illegal operation, or an operation that was legal in a previous minor version of NFSv4 andMUST NOT<bcp14>MUST NOT</bcp14> be supported in the current minor version (e.g., SETCLIENTID), the replierMAY<bcp14>MAY</bcp14> returnNFS4ERR_FALSE_RETRYNFS4ERR_SEQ_FALSE_RETRY (andMUST<bcp14>MUST</bcp14> do so if the users of the original request and retry differ). Otherwise, the replierMAY<bcp14>MAY</bcp14> return NFS4ERR_OP_ILLEGAL or NFS4ERR_BADXDR or NFS4ERR_NOTSUPP as appropriate. Note that the handling is in contrast for how the replier deals with retries requests with no cached reply. The difference is due toNFS4ERR_FALSE_RETRYNFS4ERR_SEQ_FALSE_RETRY being a valid error for only Sequence operations, whereas NFS4ERR_RETRY_UNCACHED_REP is a valid error for all operations except illegal operations and operations thatMUST NOT<bcp14>MUST NOT</bcp14> be supported in the current minor version of NFSv4. </t> </section> </section><!-- Optional Reply Caching --></section><!-- Slot Identifiers and Server Reply Cache --><section anchor="Retry_and_Replay"title="Retrynumbered="true" toc="default"> <name>Retry and Replay ofReply">Reply</name> <t> A requesterMUST NOT<bcp14>MUST NOT</bcp14> retry a request, unless the connection it used to send the request disconnects. The requester can then reconnect and re-send the request, or it can re-send the request over a different connection that is associated with the same session. </t> <t> If the requester is a server wanting to re-send a callback operation over the backchannel of a session, the requester of course cannot reconnect because only the client can associate connections with the backchannel. The server can re-send the request over another connection that is bound to the same session's backchannel. If there is no such connection, the serverMUST<bcp14>MUST</bcp14> indicate that the session has no backchannel by setting the SEQ4_STATUS_CB_PATH_DOWN_SESSION flag bit in the response to the next SEQUENCE operation from the client. The clientMUST<bcp14>MUST</bcp14> then associate a connection with the session (or destroy the session). </t> <t> Note that it is not fatal for a requester to retry without a disconnect between the request and retry. However, the retry does consume resources, especially with RDMA, where each request, retry or not, consumes a credit. Retries for no reason, especially retries sent shortly after the previous attempt, are a poor use of network bandwidth and defeat the purpose of a transport's inherent congestion control system. </t> <t> A requesterMUST<bcp14>MUST</bcp14> wait for a reply to a request before using the slot for another request. If it does not wait for a reply, then the requester does not know what sequence ID to use for the slot on its next request. For example, suppose a requester sends a request with sequence ID 1, and does not wait for the response. The next time it uses the slot, it sends the new request with sequence ID 2. If the replier has not seen the request with sequence ID 1, then the replier is not expecting sequence ID 2, and rejects the requester's new request with NFS4ERR_SEQ_MISORDERED (as the result from SEQUENCE or CB_SEQUENCE). </t> <t> RDMA fabrics do not guarantee that the memory handles (Steering Tags) within each RPC/RDMA "chunk" <xref target="RFC8166"/>format="default"/> are valid on a scope outside that of a single connection. Therefore, handles used by the direct operations become invalid after connection loss. The server must ensure that any RDMA operations that must be replayed from the reply cache use the newly provided handle(s) from the most recent request. </t> <t> A retry might be sent while the original request is still in progress on the replier. The replierSHOULD<bcp14>SHOULD</bcp14> deal with the issue by returning NFS4ERR_DELAY as the reply to SEQUENCE or CB_SEQUENCE operation, but implementationsMAY<bcp14>MAY</bcp14> return NFS4ERR_MISORDERED. Since errors from SEQUENCE and CB_SEQUENCE are never recorded in the reply cache, this approach allows the results of the execution of the original request to be properly recorded in the reply cache (assuming that the requester specified the reply to be cached). </t> </section><!-- Retry and Replay --><section anchor="sessions_callback_races"title="Resolvingnumbered="true" toc="default"> <name>Resolving Server CallbackRaces">Races</name> <t> It is possible for server callbacks to arrive at the client before the reply from related fore channel operations. For example, a client may have been granted a delegation to a file it has opened, but the reply to the OPEN (informing the client of the granting of the delegation) may be delayed in the network. If a conflicting operation arrives at the server, it will recall the delegation using the backchannel, which may be on a different transport connection, perhaps even a different network, or even a different session associated with the same client ID. </t> <t> The presence of a session between the client and server alleviates this issue. When a session is in place, each client request is uniquely identified by its { session ID, slot ID, sequence ID } triple. By the rules under which slot entries (reply cache entries) are retired, the server has knowledge whether the client has "seen" each of the server's replies. The server can therefore provide sufficient information to the client to allow it to disambiguate between an erroneous or conflicting callback race condition. </t> <t> For each client operation that might result in some sort of server callback, the serverSHOULD<bcp14>SHOULD</bcp14> "remember" the { session ID, slot ID, sequence ID } triple of the client request until the slot ID retirement rules allow the server to determine that the client has, in fact, seen the server's reply. Until the time the { session ID, slot ID, sequence ID } request triple can be retired, any recalls of the associated objectMUST<bcp14>MUST</bcp14> carry an array of these referring identifiers (in the CB_SEQUENCE operation's arguments), for the benefit of the client. After this time, it is not necessary for the server to provide this information in related callbacks, since it is certain that a race condition can no longer occur. </t> <t> The CB_SEQUENCE operation that begins each server callback carries a list of "referring" { session ID, slot ID, sequence ID } triples. If the client finds the request corresponding to the referring session ID, slot ID, and sequence ID to be currently outstanding (i.e., the server's reply has not been seen by the client), it can determine that the callback has raced the reply, and act accordingly. If the client does not find the request corresponding to the referring triple to be outstanding (including the case of a session ID referring to a destroyed session), then there is no race with respect to this triple. The serverSHOULD<bcp14>SHOULD</bcp14> limit the referring triples to requests that refer to just those that apply to the objects referred to in the CB_COMPOUND procedure. </t> <t> The client must not simply wait forever for the expected server reply to arrive before responding to the CB_COMPOUND that won the race, because it is possible that it will be delayed indefinitely. The client should assume the likely case that the reply will arrive within the average round-trip time for COMPOUND requests to the server, and wait that period of time. If that period of time expires, it can respond to the CB_COMPOUND with NFS4ERR_DELAY. There are other scenarios under which callbacks may race replies. Among them are pNFS layout recalls as described in <xref target="pnfs_operation_sequencing"/>.format="default"/>. </t> </section><!-- Resolving server callback races with sessions --><section anchor="COMPOUND_Sizing_Issues"title="COMPOUNDnumbered="true" toc="default"> <name>COMPOUND and CB_COMPOUND ConstructionIssues">Issues</name> <t> Very large requests and replies may pose both buffer management issues (especially with RDMA) and reply cache issues. When the session is created (<xref target="OP_CREATE_SESSION"/>),format="default"/>), for each channel (fore and back), the client and server negotiate the maximum-sized request they will send or process (ca_maxrequestsize), the maximum-sized reply they will return or process (ca_maxresponsesize), and the maximum-sized reply they will store in the reply cache (ca_maxresponsesize_cached). </t> <t> If a request exceeds ca_maxrequestsize, the reply will have the status NFS4ERR_REQ_TOO_BIG. A replierMAY<bcp14>MAY</bcp14> return NFS4ERR_REQ_TOO_BIG as the status for the first operation (SEQUENCE or CB_SEQUENCE) in the request (which means that no operations in the request executed and that the state of the slot in the reply cache is unchanged), or itMAY<bcp14>MAY</bcp14> opt to return it on a subsequent operation in the same COMPOUND or CB_COMPOUND request (which means that at least one operation did execute and that the state of the slot in the reply cache does change). The replierSHOULD<bcp14>SHOULD</bcp14> set NFS4ERR_REQ_TOO_BIG on the operation that exceeds ca_maxrequestsize. </t> <t> If a reply exceeds ca_maxresponsesize, the reply will have the status NFS4ERR_REP_TOO_BIG. A replierMAY<bcp14>MAY</bcp14> return NFS4ERR_REP_TOO_BIG as the status for the first operation (SEQUENCE or CB_SEQUENCE) in the request, or itMAY<bcp14>MAY</bcp14> opt to return it on a subsequent operation (in the same COMPOUND or CB_COMPOUND reply). A replierMAY<bcp14>MAY</bcp14> return NFS4ERR_REP_TOO_BIG in the reply to SEQUENCE or CB_SEQUENCE, even if the response would still exceed ca_maxresponsesize. </t> <t> If sa_cachethis or csa_cachethis is TRUE, then the replierMUST<bcp14>MUST</bcp14> cache a reply except if an error is returned by the SEQUENCE or CB_SEQUENCE operation (see <xref target="err_sequence"/>).format="default"/>). If the reply exceeds ca_maxresponsesize_cached (and sa_cachethis or csa_cachethis is TRUE), then the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_REP_TOO_BIG_TO_CACHE. Even if NFS4ERR_REP_TOO_BIG_TO_CACHE (or any other error for that matter) is returned on an operation other than the first operation (SEQUENCE or CB_SEQUENCE), then the replyMUST<bcp14>MUST</bcp14> be cached if sa_cachethis or csa_cachethis is TRUE. For example, if a COMPOUND has eleven operations, including SEQUENCE, the fifth operation is a RENAME, and the tenth operation is a READ for one million bytes, the server may return NFS4ERR_REP_TOO_BIG_TO_CACHE on the tenth operation. Since the server executed several operations, especially the non-idempotent RENAME, the client's request to cache the reply needs to be honored in order for the correct operation of exactly once semantics. If the client retries the request, the server will have cached a reply that contains results for ten of the eleven requested operations, with the tenth operation having a status of NFS4ERR_REP_TOO_BIG_TO_CACHE. </t> <t> A client needs to take care that, when sending operations that change the current filehandle (except for PUTFH, PUTPUBFH, PUTROOTFH, and RESTOREFH), it does not exceed the maximum reply buffer before the GETFH operation. Otherwise, the client will have to retry the operation that changed the current filehandle, in order to obtain the desired filehandle. For the OPEN operation (see <xref target="OP_OPEN"/>),format="default"/>), retry is not always available as an option. The following guidelines for the handling of filehandle-changing operations are advised:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Within the same COMPOUND procedure, a clientSHOULD<bcp14>SHOULD</bcp14> send GETFH immediately after a current filehandle-changing operation. A clientMUST<bcp14>MUST</bcp14> send GETFH after a current filehandle-changing operation that is also non-idempotent (e.g., the OPEN operation), unless the operation is RESTOREFH. RESTOREFH is an exception, because even though it is non-idempotent, the filehandle RESTOREFH produced originated from an operation that is either idempotent (e.g., PUTFH, LOOKUP), or non-idempotent (e.g., OPEN, CREATE). If the origin is non-idempotent, then because the clientMUST<bcp14>MUST</bcp14> send GETFH after the origin operation, the client can recover if RESTOREFH returns an error.</t> <t></li> <li> A serverMAY<bcp14>MAY</bcp14> return NFS4ERR_REP_TOO_BIG or NFS4ERR_REP_TOO_BIG_TO_CACHE (if sa_cachethis is TRUE) on a filehandle-changing operation if the reply would be too large on the next operation.</t> <t></li> <li> A serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_REP_TOO_BIG or NFS4ERR_REP_TOO_BIG_TO_CACHE (if sa_cachethis is TRUE) on a filehandle-changing, non-idempotent operation if the reply would be too large on the next operation, especially if the operation is OPEN.</t> <t></li> <li> A serverMAY<bcp14>MAY</bcp14> return NFS4ERR_UNSAFE_COMPOUND to a non-idempotent current filehandle-changing operation, if it looks at the next operation (in the same COMPOUND procedure) and finds it is not GETFH. The serverSHOULD<bcp14>SHOULD</bcp14> do this if it is unable to determine in advance whether the total response size would exceed ca_maxresponsesize_cached or ca_maxresponsesize.</t> </list> </t></li> </ul> </section><!-- COMPOUND and CB_COMPOUND Construction Issues --><section anchor="Persistence"title="Persistence">numbered="true" toc="default"> <name>Persistence</name> <t> Since the reply cache is bounded, it is practical for the reply cache to persist across server restarts. The replierMUST<bcp14>MUST</bcp14> persist the following information if it agreed to persist the session (when the session was created; see <xref target="OP_CREATE_SESSION"/>): <list style='symbols'> <t>format="default"/>): </t> <ul spacing="normal"> <li> The session ID.</t> <t></li> <li> The slot table including the sequence ID and cached reply for each slot.</t> </list></li> </ul> <t> The above are sufficient for a replier to provide EOS semantics for any requests that were sent and executed before the server restarted. If the replier is a client, then there is no need for it to persist any more information, unless the client will be persisting all other state across client restart, in which case, the server will never see any NFSv4.1-level protocol manifestation of a client restart. If the replier is a server, with just the slot table and session ID persisting, any requests the client retries after the server restart will return the results that are cached in the reply cache, and any new requests (i.e., the sequence ID is one greater than the slot's sequence ID)MUST<bcp14>MUST</bcp14> be rejected with NFS4ERR_DEADSESSION (returned by SEQUENCE). Such a session is considered dead. A serverMAY<bcp14>MAY</bcp14> re-animate a session after a server restart so that the session will accept new requests as well as retries. To re-animate a session, the server needs to persist additional information through server restart:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The client ID. This is a prerequisite to let the client create more sessions associated with the same client ID as the re-animated session.</t> <t></li> <li> The client ID's sequence ID that is used for creating sessions (see Sections <xref target="OP_EXCHANGE_ID"format="counter" />format="counter"/> and <xref target="OP_CREATE_SESSION"format="counter" />).format="counter"/>). This is a prerequisite to let the client create more sessions.</t> <t></li> <li> The principal that created the client ID. This allows the server to authenticate the client when it sends EXCHANGE_ID.</t> <t></li> <li> The SSV, if SP4_SSV state protection was specified when the client ID was created (see <xref target="OP_EXCHANGE_ID"/>).format="default"/>). This lets the client create new sessions, and associate connections with the new and existing sessions.</t> <t></li> <li> The properties of the client ID as defined in <xref target="OP_EXCHANGE_ID"/>. </t> </list> </t>format="default"/>. </li> </ul> <t> A persistent reply cache places certain demands on the server. The execution of the sequence of operations (starting with SEQUENCE) and placement of its results in the persistent cacheMUST<bcp14>MUST</bcp14> be atomic. If a client retries a sequence of operations that was previously executed on the server, the only acceptable outcomes are either the original cached reply or an indication that the client ID or session has been lost (indicating a catastrophic loss of the reply cache or a session that has been deleted because the client failed to use the session for an extended period of time). </t> <t> A server could fail and restart in the middle of a COMPOUND procedure that contains one or more non-idempotent or idempotent-but-modifying operations. This creates an even higher challenge for atomic execution and placement of results in the reply cache. One way to view the problem is as a single transaction consisting of each operation in the COMPOUND followed by storing the result in persistent storage, then finally a transaction commit. If there is a failure before the transaction is committed, then the server rolls back the transaction. If the server itself fails, then when it restarts, its recovery logic could roll back the transaction before starting the NFSv4.1 server. </t> <t> While the description of the implementation for atomic execution of the request and caching of the reply is beyond the scope of this document, an example implementation for NFSv2 <xreftarget="RFC1094"/>target="RFC1094" format="default"/> is described in <xref target="ha_nfs_ibm"/>.format="default"/>. </t> </section><!-- Persistence --></section><!-- Exactly Once Semantics --><section anchor="RDMA_Considerations"title="RDMA Considerations">numbered="true" toc="default"> <name>RDMA Considerations</name> <t> A complete discussion of the operation of RPC-based protocols over RDMA transports is in <xref target="RFC8166"/>.format="default"/>. A discussion of the operation of NFSv4, including NFSv4.1, over RDMA is in <xref target="RFC8267"/>.format="default"/>. Where RDMA is considered, this specification assumes the use of such a layering; it addresses only the upper-layer issues relevant to making best use of RPC/RDMA. </t> <section anchor="RDMA_Connection_Resources"title="RDMAnumbered="true" toc="default"> <name>RDMA ConnectionResources">Resources</name> <t> RDMA requires its consumers to register memory and post buffers of a specific size and number for receive operations. </t> <t> Registration of memory can be a relatively high-overhead operation, since it requires pinning of buffers, assignment of attributes (e.g., readable/writable), and initialization of hardware translation. Preregistration is desirable to reduce overhead. These registrations are specific to hardware interfaces and even to RDMA connection endpoints; therefore, negotiation of their limits is desirable to manage resources effectively. </t> <t> Following basic registration, these buffers must be posted by the RPC layer to handle receives. These buffers remain in use by the RPC/NFSv4.1 implementation; the size and number of them must be known to the remote peer in order to avoid RDMA errors that would cause a fatal error on the RDMA connection. </t> <t> NFSv4.1 manages slots as resources on a per-session basis (see <xref target="Session"/>),format="default"/>), while RDMA connections manage credits on a per-connection basis. This means that in order for a peer to send data over RDMA to a remote buffer, it has to have both an NFSv4.1 slot and an RDMA credit. If multiple RDMA connections are associated with a session, then if the total number of credits across all RDMA connections associated with the session is X, and the number of slots in the session is Y, then the maximum number of outstanding requests is the lesser of X and Y. </t> </section><!-- RDMA Connection Resources --><section anchor="Flow_Control"title="Flow Control">numbered="true" toc="default"> <name>Flow Control</name> <t> Previous versions of NFS do not provide flow control; instead, they rely on the windowing provided by transports like TCP to throttle requests. This does not work with RDMA, which provides no operation flow control and will terminate a connection in error when limits are exceeded. Limits such as maximum number of requests outstanding are therefore negotiated when a session is created (see the ca_maxrequests field in <xref target="OP_CREATE_SESSION"/>).format="default"/>). These limits then provide the maxima within which each connection associated with the session's channel(s) must remain. RDMA connections are managed within these limits as described inSection 3.3 of<xref target="RFC8166"/>;sectionFormat="of" section="3.3"/>; if there are multiple RDMA connections, then the maximum number of requests for a channel will be divided among the RDMA connections. Put a different way, the onus is on the replier to ensure that the total number of RDMA credits across all connections associated with the replier's channel does exceed the channel's maximum number of outstanding requests. </t> <t> The limits may also be modified dynamically at the replier's choosing by manipulating certain parameters present in each NFSv4.1 reply. In addition, the CB_RECALL_SLOT callback operation (see <xref target="OP_CB_RECALL_SLOT"/>)format="default"/>) can be sent by a server to a client to return RDMA credits to the server, thereby lowering the maximum number of requests a client can have outstanding to the server. </t> </section><!-- Flow Control --><section anchor="Padding"title="Padding">numbered="true" toc="default"> <name>Padding</name> <t> Header padding is requested by each peer at session initiation (see the ca_headerpadsize argument to CREATE_SESSION in <xref target="OP_CREATE_SESSION"/>),format="default"/>), and subsequently used by the RPC RDMA layer, as described in <xref target="RFC8166"/>.format="default"/>. Zero padding is permitted. </t> <t> Padding leverages the useful property that RDMA preserve alignment of data, even when they are placed into anonymous (untagged) buffers. If requested, client inline writes will insert appropriate pad bytes within the request header to align the data payload on the specified boundary. The client is encouraged to add sufficient padding (up to the negotiated size) so that the "data" field of the WRITE operation is aligned. Most servers can make good use of such padding, which allows them to chain receive buffers in such a way that any data carried by client requests will be placed into appropriate buffers at the server, ready for file system processing. The receiver's RPC layer encounters no overhead from skipping over pad bytes, and the RDMA layer's high performance makes the insertion and transmission of padding on the sender a significant optimization. In this way, the need for servers to perform RDMA Read to satisfy all but the largest client writes is obviated. An added benefit is the reduction of message round trips on the network -- a potentially good trade, where latency is present. </t> <t> The value to choose for padding is subject to a number of criteria. A primary source of variable-length data in the RPC header is the authentication information, the form of which is client-determined, possibly in response to server specification. The contents of COMPOUNDs, sizes of strings such as those passed to RENAME, etc. all go into the determination of a maximal NFSv4.1 request size and therefore minimal buffer size. The client must select its offered value carefully, so as to avoid overburdening the server, and vice versa. The benefit of an appropriate padding value is higher performance. </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ Sender gather: |RPC Request|Pad bytes|Length| -> |User data...| \------+----------------------/ \ \ \ \ Receiver scatter: \-----------+- ... /-----+----------------\ \ \ |RPC Request|Pad|Length| -> |FS buffer|->|FS buffer|->...</artwork> </figure>]]></artwork> <t> In the above case, the server may recycle unused buffers to the next posted receive if unused by the actual received request, or may pass the now-complete buffers by reference for normal write processing. For a server that can make use of it, this removes any need for data copies of incoming data, without resorting to complicated end-to-end buffer advertisement and management. This includes most kernel-based and integrated server designs, among many others. The client may perform similar optimizations, if desired. </t> </section><!-- Padding --><section anchor="dual"title="Dualnumbered="true" toc="default"> <name>Dual RDMA and Non-RDMATransports">Transports</name> <t> Some RDMA transports (e.g., RFC 5040 <xreftarget="RDMAP">RFC 5040</xref>)target="RFC5040" format="default"/>) permit a "streaming" (non-RDMA) phase, where ordinary traffic might flow before "stepping up" to RDMA mode, commencing RDMA traffic. Some RDMA transports start connections always in RDMA mode. NFSv4.1 allows, but does not assume, a streaming phase before RDMA mode. When a connection is associated with a session, the client and server negotiate whether the connection is used in RDMA or non-RDMA mode (see Sections <xref target="OP_CREATE_SESSION"format="counter" />format="counter"/> and <xref target="OP_BIND_CONN_TO_SESSION"format="counter" />).format="counter"/>). </t> </section><!-- RDMA Transports --></section><!-- RDMA Considerations --><section anchor="Sessions_Security"title="Session Security">numbered="true" toc="default"> <name>Session Security</name> <section anchor="Session_Callback_Security"title="Sessionnumbered="true" toc="default"> <name>Session CallbackSecurity">Security</name> <t> Via session/connection association, NFSv4.1 improves security over that provided by NFSv4.0 for the backchannel. The connection is client-initiated (see <xref target="OP_BIND_CONN_TO_SESSION"/>)format="default"/>) and subject to the same firewall and routing checks as the fore channel. At the client's option (see <xref target="OP_EXCHANGE_ID"/>),format="default"/>), connection association is fully authenticated before being activated (see <xref target="OP_BIND_CONN_TO_SESSION"/>).format="default"/>). Traffic from the server over the backchannel is authenticated exactly as the client specifies (see <xref target="Backchannel_RPC_Security"/>).format="default"/>). </t> </section><!-- Session Callback Security --><section anchor="Backchannel_RPC_Security"title="Backchannelnumbered="true" toc="default"> <name>Backchannel RPCSecurity">Security</name> <t> When the NFSv4.1 client establishes the backchannel, it informs the server of the security flavors and principals to use when sending requests. If the security flavor is RPCSEC_GSS, the client expresses the principal in the form of an established RPCSEC_GSS context. The server is free to use any of the flavor/principal combinations the client offers, but itMUST NOT<bcp14>MUST NOT</bcp14> use unoffered combinations. This way, the client need not provide a target GSS principal for the backchannel as it did with NFSv4.0, nor does the server have to implement an RPCSEC_GSS initiator as it did with NFSv4.0 <xref target="RFC3530"/>.format="default"/>. </t> <t> The CREATE_SESSION (<xref target="OP_CREATE_SESSION"/>)format="default"/>) and BACKCHANNEL_CTL (<xref target="OP_BACKCHANNEL_CTL"/>)format="default"/>) operations allow the client to specify flavor/principal combinations. </t> <t> Also note that the SP4_SSV state protection mode (see Sections <xref target="OP_EXCHANGE_ID"format="counter" />format="counter"/> and <xref target="protect_state_change"format="counter" />)format="counter"/>) has the side benefit of providing SSV-derived RPCSEC_GSS contexts (<xref target="ssv_mech"/>).format="default"/>). </t> </section><!-- Backchannel RPC Security --><section anchor="protect_state_change"title="Protectionnumbered="true" toc="default"> <name>Protection from Unauthorized StateChanges">Changes</name> <t> As described to this point in the specification, the state model of NFSv4.1 is vulnerable to an attacker that sends a SEQUENCE operation with a forged session ID and with a slot ID that it expects the legitimate client to use next. When the legitimate client uses the slot ID with the same sequence number, the server returns the attacker's result from the reply cache, which disrupts the legitimate client and thus denies service to it. Similarly, an attacker could send a CREATE_SESSION with a forged client ID to create a new session associated with the client ID. The attacker could send requests using the new session that change locking state, such as LOCKU operations to release locks the legitimate client has acquired. Setting a security policy on the file that requires RPCSEC_GSS credentials when manipulating the file's state is one potential work around, but has the disadvantage of preventing a legitimate client from releasing state when RPCSEC_GSS is required to do so, but a GSS context cannot be obtained (possibly because the user has logged off the client). </t> <t> NFSv4.1 provides three options to a client for state protection, which are specified when a client creates a client ID via EXCHANGE_ID (<xref target="OP_EXCHANGE_ID"/>).format="default"/>). </t> <t> The first (SP4_NONE) is to simply waive state protection. </t> <t> The other two options (SP4_MACH_CRED and SP4_SSV) share several traits:<list style="symbols"> <t></t> <ul spacing="normal"> <li> An RPCSEC_GSS-based credential is used to authenticate client ID and session maintenance operations, including creating and destroying a session, associating a connection with the session, and destroying the client ID.</t> <t></li> <li> Because RPCSEC_GSS is used to authenticate client ID and session maintenance, the attacker cannot associate a rogue connection with a legitimate session, or associate a rogue session with a legitimate client ID in order to maliciously alter the client ID's lock state via CLOSE, LOCKU, DELEGRETURN, LAYOUTRETURN, etc.</t> <t></li> <li> In cases where the server's security policies on a portion of its namespace require RPCSEC_GSS authentication, a client may have to use an RPCSEC_GSS credential to remove per-file state (e.g., LOCKU, CLOSE, etc.). The server may require that the principal that removes the state match certain criteria (e.g., the principal might have to be the same as the one that acquired the state). However, the client might not have an RPCSEC_GSS context for such a principal, and might not be able to create such a context (perhaps because the user has logged off). When the client establishes SP4_MACH_CRED or SP4_SSV protection, it can specify a list of operations that the serverMUST<bcp14>MUST</bcp14> allow using the machine credential (if SP4_MACH_CRED is used) or the SSV credential (if SP4_SSV is used).</t> </list> </t></li> </ul> <t> The SP4_MACH_CRED state protection option uses a machine credential where the principal that creates the client IDMUST<bcp14>MUST</bcp14> also be the principal that performs client ID and session maintenance operations. The security of the machine credential state protection approach depends entirely on safeguarding the per-machine credential. Assuming a proper safeguard using the per-machine credential for operations like CREATE_SESSION, BIND_CONN_TO_SESSION, DESTROY_SESSION, and DESTROY_CLIENTID will prevent an attacker from associating a rogue connection with a session, or associating a rogue session with a client ID. </t> <t> There are at least three scenarios for the SP4_MACH_CRED option:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> The system administrator configures a unique, permanent per-machine credential for one of the mandated GSS mechanisms (e.g., if Kerberos V5 is used, a "keytab" containing a principal derived from a client host name could be used).</t> <t></li> <li> The client is used by a single user, and so the client ID and its sessions are used by just that user. If the user's credential expires, then session and client ID maintenance cannot occur, but since the client has a single user, only that user is inconvenienced.</t> <t></li> <li> The physical client has multiple users, but the client implementation has a unique client ID for each user. This is effectively the same as the second scenario, but a disadvantage is that each user needs to be allocated at least one session each, so the approach suffers from lack of economy.</t> </list> </t></li> </ol> <t> The SP4_SSV protection option uses the SSV (<xreftarget="intro_definitions"/>),target="intro_definitions" format="default"/>), via RPCSEC_GSS and the SSV GSS mechanism (<xref target="ssv_mech"/>),format="default"/>), to protect state from attack. The SP4_SSV protection option is intended for the situation comprised of a client that has multiple active users and a system administrator who wants to avoid the burden of installing a permanent machine credential on each client. The SSV is established and updated on the server via SET_SSV (see <xref target="OP_SET_SSV"/>).format="default"/>). To prevent eavesdropping, a clientSHOULD<bcp14>SHOULD</bcp14> send SET_SSV via RPCSEC_GSS with the privacy service. Several aspects of the SSV make it intractable for an attacker to guess the SSV, and thus associate rogue connections with a session, and rogue sessions with a client ID:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The arguments to and results of SET_SSV include digests of the old and new SSV, respectively.</t> <t></li> <li> Because the initial value of the SSV is zero, therefore known, the client that opts for SP4_SSV protection and opts to apply SP4_SSV protection to BIND_CONN_TO_SESSION and CREATE_SESSIONMUST<bcp14>MUST</bcp14> send at least one SET_SSV operation before the first BIND_CONN_TO_SESSION operation or before the second CREATE_SESSION operation on a client ID. If it does not, the SSV mechanism will not generate tokens (<xref target="ssv_mech"/>).format="default"/>). A clientSHOULD<bcp14>SHOULD</bcp14> send SET_SSV as soon as a session is created.</t> <t></li> <li> A SET_SSV request does not replace the SSV with the argument to SET_SSV. Instead, the current SSV on the server is logically exclusive ORed (XORed) with the argument to SET_SSV. Each time a new principal uses a client ID for the first time, the clientSHOULD<bcp14>SHOULD</bcp14> send a SET_SSV with that principal's RPCSEC_GSS credentials, with RPCSEC_GSS service set to RPC_GSS_SVC_PRIVACY.</t> </list> </t></li> </ul> <t> Here are the types of attacks that can be attempted by an attacker named Eve on a victim named Bob, and how SP4_SSV protection foils each attack:<list style="symbols"></t> <ul spacing="normal"> <li> <t> Suppose Eve is the first user to log into a legitimate client. Eve's use of an NFSv4.1 file system will cause the legitimate client to create a client ID with SP4_SSV protection, specifying that the BIND_CONN_TO_SESSION operationMUST<bcp14>MUST</bcp14> use the SSV credential. Eve's use of the file system also causes an SSV to be created. The SET_SSV operation that creates the SSV will be protected by the RPCSEC_GSS context created by the legitimate client, which uses Eve's GSS principal and credentials. Eve can eavesdrop on the network while her RPCSEC_GSS context is created and the SET_SSV using her context is sent. Even if the legitimate client sends the SET_SSV with RPC_GSS_SVC_PRIVACY, because Eve knows her own credentials, she can decrypt the SSV. Eve can compute an RPCSEC_GSS credential that BIND_CONN_TO_SESSION will accept, and so associate a new connection with the legitimate session. Eve can change the slot ID and sequence state of a legitimate session, and/or the SSV state, in such a way that when Bob accesses the server via the same legitimate client, the legitimate client will be unable to use the session.<vspace blankLines='1' /></t> <t> The client's only recourse is to create a new client ID for Bob to use, and establish a new SSV for the client ID. The client will be unable to delete the old client ID, and will let the lease on the old client ID expire.<vspace blankLines='1' /></t> <t> Once the legitimate client establishes an SSV over the new session using Bob's RPCSEC_GSS context, Eve can use the new session via the legitimate client, but she cannot disrupt Bob. Moreover, because the clientSHOULD<bcp14>SHOULD</bcp14> have modified the SSV due to Eve using the new session, Bob cannot get revenge on Eve by associating a rogue connection with the session.<vspace blankLines='1' /></t> <t> The question is how did the legitimate client detect that Eve has hijacked the old session? When the client detects that a new principal, Bob, wants to use the session, itSHOULD<bcp14>SHOULD</bcp14> have sent a SET_SSV, which leads to the following sub-scenarios:<vspace blankLines='1' /> <list style="symbols"></t> <ul spacing="normal"> <li> <t> Let us suppose that from the rogue connection, Eve sent a SET_SSV with the same slot ID and sequence ID that the legitimate client later uses. The server will assume the SET_SSV sent with Bob's credentials is a retry, and return to the legitimate client the reply it sent Eve. However, unless Eve can correctly guess the SSV the legitimate client will use, the digest verification checks in the SET_SSV response will fail. That is an indication to the client that the session has apparently been hijacked.<vspace blankLines='1' /></t> </li> <li> <t> Alternatively, Eve sent a SET_SSV with a different slot ID than the legitimate client uses for its SET_SSV. Then the digest verification of the SET_SSV sent with Bob's credentials fails on the server, and the error returned to the client makes it apparent that the session has been hijacked.<vspace blankLines='1' /></t> </li> <li> <t> Alternatively, Eve sent an operation other than SET_SSV, but with the same slot ID and sequence that the legitimate client uses for its SET_SSV. The server returns to the legitimate client the response it sent Eve. The client sees that the response is not at all what it expects. The client assumes either session hijacking or a server bug, and either way destroys the old session.<vspace blankLines='1' /> </t> </list></t> </li> </ul> </li> <li> <t> Eve associates a rogue connection with the session as above, and then destroys the session. Again, Bob goes to use the server from the legitimate client, which sends a SET_SSV using Bob's credentials. The client receives an error that indicates that the session does not exist. When the client tries to create a new session, this will fail because the SSV it has does not match that which the server has, and now the client knows the session was hijacked. The legitimate client establishes a new client ID.<vspace blankLines='1' /></t> </li> <li> <t> If Eve creates a connection before the legitimate client establishes an SSV, because the initial value of the SSV is zero and therefore known, Eve can send a SET_SSV that will pass the digest verification check. However, because the new connection has not been associated with the session, the SET_SSV is rejected for that reason.<vspace blankLines='1' /></t></list></li> </ul> <t> In summary, an attacker's disruption of state when SP4_SSV protection is in use is limited to the formative period of a client ID, its first session, and the establishment of the SSV. Once a non-malicious user uses the client ID, the client quickly detects any hijack and rectifies the situation. Once a non-malicious user successfully modifies the SSV, the attacker cannot use NFSv4.1 operations to disrupt the non-malicious user. </t> <t> Note that neither the SP4_MACH_CRED nor SP4_SSV protection approaches prevent hijacking of a transport connection that has previously been associated with a session. If the goal of a counter-threat strategy is to prevent connection hijacking, the use of IPsec isRECOMMENDED.<bcp14>RECOMMENDED</bcp14>. </t> <t> If a connection hijack occurs, the hijacker could in theory change locking state and negatively impact the service to legitimate clients. However, if the server is configured to require the use of RPCSEC_GSS with integrity or privacy on the affected file objects, and if EXCHGID4_FLAG_BIND_PRINC_STATEID capability (<xreftarget="OP_EXCHANGE_ID"/>)target="OP_EXCHANGE_ID" format="default"/>) is in force, this will thwart unauthorized attempts to change locking state. </t> </section><!-- Protection from Unauthorized State Changes --></section><!-- Sessions Security --><sectiontitle="Theanchor="ssv_mech" numbered="true" toc="default"> <name>The Secret State Verifier (SSV) GSSMechanism" anchor="ssv_mech">Mechanism</name> <t> The SSV provides the secret key for a GSS mechanism internal to NFSv4.1 that NFSv4.1 uses for state protection. Contexts for this mechanism are not established via the RPCSEC_GSS protocol. Instead, the contexts are automatically created when EXCHANGE_ID specifies SP4_SSV protection. The only tokens defined are the PerMsgToken (emitted by GSS_GetMIC) and the SealedMessage token (emitted by GSS_Wrap). </t> <t> The mechanism OID for the SSV mechanism is iso.org.dod.internet.private.enterprise.Michael Eisler.nfs.ssv_mech (1.3.6.1.4.1.28882.1.1). While the SSV mechanism does not define any initial context tokens, the OID can be used to let servers indicate that the SSV mechanism is acceptable whenever the client sends a SECINFO or SECINFO_NO_NAME operation (see <xref target="Security_Service_Negotiation"/>).format="default"/>). </t> <t> The SSV mechanism defines four subkeys derived from the SSV value. Each time SET_SSV is invoked, the subkeys are recalculated by the client and server. The calculation of each of the four subkeys depends on each of the four respective ssv_subkey4 enumerated values. The calculation uses the HMAC <xref target="RFC2104"/>format="default"/> algorithm, using the current SSV as the key, the one-way hash algorithm as negotiated by EXCHANGE_ID, and the input text as represented by the XDR encoded enumeration value for that subkey of data type ssv_subkey4. If the length of the output of the HMAC algorithm exceeds the length of key of the encryption algorithm (which is also negotiated by EXCHANGE_ID), then the subkeyMUST<bcp14>MUST</bcp14> be truncated from the HMAC output, i.e., if the subkey is of N bytes long, then the first N bytes of the HMAC outputMUST<bcp14>MUST</bcp14> be used for the subkey. The specification of EXCHANGE_ID states that the length of the output of the HMAC algorithmMUST NOT<bcp14>MUST NOT</bcp14> be less than the length of subkey needed for the encryption algorithm (see <xreftarget="OP_EXCHANGE_ID"/>).target="OP_EXCHANGE_ID" format="default"/>). </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ /* Input for computing subkeys */ enum ssv_subkey4 { SSV4_SUBKEY_MIC_I2T = 1, SSV4_SUBKEY_MIC_T2I = 2, SSV4_SUBKEY_SEAL_I2T = 3, SSV4_SUBKEY_SEAL_T2I = 4 };</artwork> </figure>]]></sourcecode> <t> The subkey derived from SSV4_SUBKEY_MIC_I2T is used for calculating message integrity codes (MICs) that originate from the NFSv4.1 client, whether as part of a request over the fore channel or a response over the backchannel. The subkey derived from SSV4_SUBKEY_MIC_T2I is used for MICs originating from the NFSv4.1 server. The subkey derived from SSV4_SUBKEY_SEAL_I2T is used for encryption text originating from the NFSv4.1 client, and the subkey derived from SSV4_SUBKEY_SEAL_T2I is used for encryption text originating from the NFSv4.1 server. </t> <t> The PerMsgToken description is based on an XDR definition: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ /* Input for computing smt_hmac */ struct ssv_mic_plain_tkn4 { uint32_t smpt_ssv_seq; opaquesmpt_orig_plain<>;smpt_orig_plain<>; };</artwork> </figure> <figure> <artwork>]]></sourcecode> <sourcecode type="xdr"><![CDATA[ /* SSV GSS PerMsgToken token */ struct ssv_mic_tkn4 { uint32_t smt_ssv_seq; opaquesmt_hmac<>;smt_hmac<>; };</artwork> </figure>]]></sourcecode> <t> The field smt_hmac is an HMAC calculated by using the subkey derived from SSV4_SUBKEY_MIC_I2T or SSV4_SUBKEY_MIC_T2I as the key, the one-way hash algorithm as negotiated by EXCHANGE_ID, and the input text as represented by data of type ssv_mic_plain_tkn4. The field smpt_ssv_seq is the same as smt_ssv_seq. The field smpt_orig_plain is the "message" input passed to GSS_GetMIC() (seeSection 2.3.1 of<xreftarget="RFC2743"/>).target="RFC2743" sectionFormat="of" section="2.3.1"/>). The caller of GSS_GetMIC() provides a pointer to a buffer containing the plain text. The SSV mechanism's entry point for GSS_GetMIC() encodes this into an opaque array, and the encoding will include an initial four-byte length, plus any necessary padding. Prepended to this will be the XDR encoded value of smpt_ssv_seq, thus making up an XDR encoding of a value of data type ssv_mic_plain_tkn4, which in turn is the input into the HMAC. </t> <t> The token emitted by GSS_GetMIC() is XDR encoded and of XDR data type ssv_mic_tkn4. The field smt_ssv_seq comes from the SSV sequence number, which is equal to one after SET_SSV (<xref target="OP_SET_SSV"/>)format="default"/>) is called the first time on a client ID. Thereafter, the SSV sequence number is incremented on each SET_SSV. Thus, smt_ssv_seq represents the version of the SSV at the time GSS_GetMIC() was called. As noted in <xref target="OP_EXCHANGE_ID"/>,format="default"/>, the client and server can maintain multiple concurrent versions of the SSV. This allows the SSV to be changed without serializing all RPC calls that use the SSV mechanism with SET_SSV operations. Once the HMAC is calculated, it is XDR encoded into smt_hmac, which will include an initial four-byte length, and any necessary padding. Prepended to this will be the XDR encoded value of smt_ssv_seq. </t> <t> The SealedMessage description is based on an XDR definition: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ /* Input for computing ssct_encr_data and ssct_hmac */ struct ssv_seal_plain_tkn4 { opaquesspt_confounder<>;sspt_confounder<>; uint32_t sspt_ssv_seq; opaquesspt_orig_plain<>;sspt_orig_plain<>; opaquesspt_pad<>;sspt_pad<>; };</artwork> </figure> <figure> <artwork>]]></sourcecode> <sourcecode type="xdr"><![CDATA[ /* SSV GSS SealedMessage token */ struct ssv_seal_cipher_tkn4 { uint32_t ssct_ssv_seq; opaquessct_iv<>;ssct_iv<>; opaquessct_encr_data<>;ssct_encr_data<>; opaquessct_hmac<>;ssct_hmac<>; };</artwork> </figure>]]></sourcecode> <t> The token emitted by GSS_Wrap() is XDR encoded and of XDR data type ssv_seal_cipher_tkn4. </t> <t> The ssct_ssv_seq field has the same meaning as smt_ssv_seq. </t> <t> The ssct_encr_data field is the result of encrypting a value of the XDR encoded data type ssv_seal_plain_tkn4. The encryption key is the subkey derived from SSV4_SUBKEY_SEAL_I2T or SSV4_SUBKEY_SEAL_T2I, and the encryption algorithm is that negotiated by EXCHANGE_ID. </t> <t> The ssct_iv field is the initialization vector (IV) for the encryption algorithm (if applicable) and is sent in clear text. The content and size of the IVMUST<bcp14>MUST</bcp14> comply with the specification of the encryption algorithm. For example, the id-aes256-CBC algorithmMUST<bcp14>MUST</bcp14> use a 16-byte initialization vector (IV), whichMUST<bcp14>MUST</bcp14> be unpredictable for each instance of a value of data type ssv_seal_plain_tkn4 that is encrypted with a particular SSV key. </t> <t> The ssct_hmac field is the result of computing an HMAC using the value of the XDR encoded data type ssv_seal_plain_tkn4 as the input text. The key is the subkey derived from SSV4_SUBKEY_MIC_I2T or SSV4_SUBKEY_MIC_T2I, and the one-way hash algorithm is that negotiated by EXCHANGE_ID. </t> <t> The sspt_confounder field is a random value. </t> <t> The sspt_ssv_seq field is the same as ssvt_ssv_seq. </t> <t> The field sspt_orig_plain field is the original plaintext and is the "input_message" input passed to GSS_Wrap() (seeSection 2.3.3 of<xreftarget="RFC2743"/>).target="RFC2743" sectionFormat="of" section="2.3.3"/>). As with the handling of the plaintext by the SSV mechanism's GSS_GetMIC() entry point, the entry point for GSS_Wrap() expects a pointer to the plaintext, and will XDR encode an opaque array into sspt_orig_plain representing the plain text, along with the other fields of an instance of data type ssv_seal_plain_tkn4. </t> <t> The sspt_pad field is present to support encryption algorithms that require inputs to be in fixed-sized blocks. The content of sspt_pad is zero filled except for the length. Beware that the XDR encoding of ssv_seal_plain_tkn4 contains three variable-length arrays, and so each array consumes four bytes for an array length, and each array that follows the length is always padded to a multiple of four bytes per the XDR standard. </t> <t> For example, suppose the encryption algorithm uses 16-byte blocks, and the sspt_confounder is three bytes long, and the sspt_orig_plain field is 15 bytes long. The XDR encoding of sspt_confounder uses eight bytes (4 + 3 + 1-byte pad), the XDR encoding of sspt_ssv_seq uses four bytes, the XDR encoding of sspt_orig_plain uses 20 bytes (4 + 15 + 1-byte pad), and the smallest XDR encoding of the sspt_pad field is four bytes. This totals 36 bytes. The next multiple of 16 is 48; thus, the length field of sspt_pad needs to be set to 12 bytes, or a total encoding of 16 bytes. The total number of XDR encoded bytes is thus 8 + 4 + 20 + 16 = 48. </t> <t> GSS_Wrap() emits a token that is an XDR encoding of a value of data type ssv_seal_cipher_tkn4. Note that regardless of whether or not the caller of GSS_Wrap() requests confidentiality, the token always has confidentiality. This is because the SSV mechanism is for RPCSEC_GSS, and RPCSEC_GSS never produces GSS_wrap() tokens without confidentiality. </t> <t> There is one SSV per client ID. There is a single GSS context for a client ID / SSV pair. All SSV mechanism RPCSEC_GSS handles of a client ID / SSV pair share the same GSS context. SSV GSS contexts do not expire except when the SSV is destroyed (causes would include the client ID being destroyed or a server restart). Since one purpose of context expiration is to replace keys that have been in use for "too long", hence vulnerable to compromise by brute force or accident, the client can replace the SSV key by sending periodic SET_SSV operations, which is done by cycling through different users' RPCSEC_GSS credentials. This way, the SSV is replaced without destroying the SSV's GSS contexts. </t> <t> SSV RPCSEC_GSS handles can be expired or deleted by the server at any time, and the EXCHANGE_ID operation can be used to create more SSV RPCSEC_GSS handles. Expiration of SSV RPCSEC_GSS handles does not imply that the SSV or its GSS context has expired. </t> <t> The clientMUST<bcp14>MUST</bcp14> establish an SSV via SET_SSV before the SSV GSS context can be used to emit tokens from GSS_Wrap() and GSS_GetMIC(). If SET_SSV has not been successfully called, attempts to emit tokensMUST<bcp14>MUST</bcp14> fail. </t> <t> The SSV mechanism does not support replay detection and sequencing in its tokens because RPCSEC_GSS does not use those features(See Section 5.2.2,(see "Context Creation Requests",in<xref target="RFC2203"/>).sectionFormat="of" section="5.2.2"/>). However, <xreftarget="rpcsec_ssv_consider"/>target="rpcsec_ssv_consider" format="default"/> discusses special considerations for the SSV mechanism when used with RPCSEC_GSS. </t> </section><!-- The SSV GSS Mechanism --><section anchor="rpcsec_ssv_consider"title="Securitynumbered="true" toc="default"> <name>Security Considerations for RPCSEC_GSS When Using the SSVMechanism">Mechanism</name> <t> When a client ID is created with SP4_SSV state protection (see <xreftarget="OP_EXCHANGE_ID"/>),target="OP_EXCHANGE_ID" format="default"/>), the client is permitted to associate multiple RPCSEC_GSS handles with the single SSV GSS context (see <xreftarget="ssv_mech"/>).target="ssv_mech" format="default"/>). Because of the way RPCSEC_GSS (both version 1 and version 2, see <xreftarget="RFC2203"/>target="RFC2203" format="default"/> and <xreftarget="RFC5403"/>)target="RFC5403" format="default"/>) calculate the verifier of the reply, special care must be taken by the implementation of the NFSv4.1 client to prevent attacks by a man-in-the-middle. The verifier of an RPCSEC_GSS reply is the output of GSS_GetMIC() applied to the input value of the seq_num field of the RPCSEC_GSS credential (data type rpc_gss_cred_ver_1_t) (seeSection 5.3.3.2 of<xreftarget="RFC2203"/>).target="RFC2203" sectionFormat="of" section="5.3.3.2"/>). If multiple RPCSEC_GSS handles share the same GSS context, then if one handle is used to send a request with the same seq_num value as another handle, an attacker could block the reply, and replace it with the verifier used for the other handle. </t> <t> There are multiple ways to prevent the attack on the SSV RPCSEC_GSS verifier in the reply. The simplest is believed to be as follows.<list style='symbols'> <t></t> <ul spacing="normal"> <li> Each time one or more new SSV RPCSEC_GSS handles are created via EXCHANGE_ID, the clientSHOULD<bcp14>SHOULD</bcp14> send a SET_SSV operation to modify the SSV. By changing the SSV, the new handles will not result in the re-use of an SSV RPCSEC_GSS verifier in a reply.</t> <t></li> <li> When a requester decides to use N SSV RPCSEC_GSS handles, itSHOULD<bcp14>SHOULD</bcp14> assign a unique and non-overlapping range of seq_nums to each SSV RPCSEC_GSS handle. The size of each rangeSHOULD<bcp14>SHOULD</bcp14> be equal to MAXSEQ / N (seeSection 5 of<xreftarget="RFC2203"/>target="RFC2203" sectionFormat="of" section="5"/> for the definition of MAXSEQ). When an SSV RPCSEC_GSS handle reaches its maximum, itSHOULD<bcp14>SHOULD</bcp14> force the replier to destroy the handle by sending a NULL RPC request with seq_num set to MAXSEQ + 1 (seeSection 5.3.3.3 of<xreftarget="RFC2203"/>). </t> <t>target="RFC2203" sectionFormat="of" section="5.3.3.3"/>). </li> <li> When the requester wants to increase or decrease N, itSHOULD<bcp14>SHOULD</bcp14> force the replier to destroy all N handles by sending a NULL RPC request on each handle with seq_num set to MAXSEQ + 1. If the requester is the client, itSHOULD<bcp14>SHOULD</bcp14> send a SET_SSV operation before using new handles. If the requester is the server, then the clientSHOULD<bcp14>SHOULD</bcp14> send a SET_SSV operation when it detects that the server has forced it to destroy a backchannel's SSV RPCSEC_GSS handle. By sending a SET_SSV operation, the SSV will change, and so the attacker will be unavailable to successfully replay a previous verifier in a reply to the requester.</t> </list> </t></li> </ul> <t> Note that if the replier carefully creates the SSV RPCSEC_GSS handles, the related risk of a man-in-the-middle splicing a forged SSV RPCSEC_GSS credential with a verifier for another handle does not exist. This is because the verifier in an RPCSEC_GSS request is computed from input that includes both the RPCSEC_GSS handle and seq_num (seeSection 5.3.1 of<xreftarget="RFC2203"/>).target="RFC2203" sectionFormat="of" section="5.3.1"/>). Provided the replier takes care to avoid re-using the value of an RPCSEC_GSS handle that it creates, such as by including a generation number in the handle, the man-in-the-middle will not be able to successfully replay a previous verifier in the request to a replier. </t> </section> <section anchor="Session_Mechanics_Steady_State"title="Sessionnumbered="true" toc="default"> <name>Session Mechanics - SteadyState">State</name> <section anchor="Obligations_of_the_Server"title="Obligationsnumbered="true" toc="default"> <name>Obligations of theServer">Server</name> <t> The server has the primary obligation to monitor the state of backchannel resources that the client has created for the server (RPCSEC_GSS contexts and backchannel connections). If these resources vanish, the server takes action as specified in <xref target="Events_Requiring_Server_Action"/>.format="default"/>. </t> </section><!-- Obligations of the Server --><section anchor="Obligations_of_the_Client"title="Obligationsnumbered="true" toc="default"> <name>Obligations of theClient">Client</name> <t> The clientSHOULD<bcp14>SHOULD</bcp14> honor the following obligations in order to utilize the session:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Keep a necessary session from going idle on the server. A client that requires a session but nonetheless is not sending operations risks having the session be destroyed by the server. This is because sessions consume resources, and resource limitations may force the server to cull an inactive session. A serverMAY<bcp14>MAY</bcp14> consider a session to be inactive if the client has not used the session before the session inactivity timer (<xreftarget="session_inactive"/>)target="session_inactive" format="default"/>) has expired.</t> <t></li> <li> Destroy the session when not needed. If a client has multiple sessions, one of which has no requests waiting for replies, and has been idle for some period of time, itSHOULD<bcp14>SHOULD</bcp14> destroy the session.</t> <t></li> <li> Maintain GSS contexts and RPCSEC_GSS handles for the backchannel. If the client requires the server to use the RPCSEC_GSS security flavor for callbacks, then it needs to be sure the RPCSEC_GSS handles and/or their GSS contexts that are handed to the server via BACKCHANNEL_CTL or CREATE_SESSION are unexpired.</t> <t></li> <li> Preserve a connection for a backchannel. The server requires a backchannel in order to gracefully recall recallable state or notify the client of certain events. Note that if the connection is not being used for the fore channel, there is no way for the client to tell if the connection is still alive (e.g., the server restarted without sending a disconnect). The onus is on the server, not the client, to determine if the backchannel's connection is alive, and to indicate in the response to a SEQUENCE operation when the last connection associated with a session's backchannel has disconnected.</t> </list> </t></li> </ul> </section><!-- Obligations of the Client --><section anchor="Steps_the_Client_Takes_To_Establish_a_Session"title="Stepsnumbered="true" toc="default"> <name>Steps the Client Takes to Establish aSession">Session</name> <t> If the client does not have a client ID, the client sends EXCHANGE_ID to establish a client ID. If it opts for SP4_MACH_CRED or SP4_SSV protection, in the spo_must_enforce list of operations, itSHOULD<bcp14>SHOULD</bcp14> at minimum specify CREATE_SESSION, DESTROY_SESSION, BIND_CONN_TO_SESSION, BACKCHANNEL_CTL, and DESTROY_CLIENTID. If it opts for SP4_SSV protection, the client needs to ask for SSV-based RPCSEC_GSS handles. </t> <t> The client uses the client ID to send a CREATE_SESSION on a connection to the server. The results of CREATE_SESSION indicate whether or not the server will persist the session reply cache through a server that has restarted, and the client notes this for future reference. </t> <t> If the client specified SP4_SSV state protection when the client ID was created, then itSHOULD<bcp14>SHOULD</bcp14> send SET_SSV in the first COMPOUND after the session is created. Each time a new principal goes to use the client ID, itSHOULD<bcp14>SHOULD</bcp14> send a SET_SSV again. </t> <t> If the client wants to use delegations, layouts, directory notifications, or any other state that requires a backchannel, then it needs to add a connection to the backchannel if CREATE_SESSION did not already do so. The client creates a connection, and calls BIND_CONN_TO_SESSION to associate the connection with the session and the session's backchannel. If CREATE_SESSION did not already do so, the clientMUST<bcp14>MUST</bcp14> tell the server what security is required in order for the client to accept callbacks. The client does this via BACKCHANNEL_CTL. If the client selected SP4_MACH_CRED or SP4_SSV protection when it called EXCHANGE_ID, then the clientSHOULD<bcp14>SHOULD</bcp14> specify that the backchannel use RPCSEC_GSS contexts for security. </t> <t> If the client wants to use additional connections for the backchannel, then it needs to call BIND_CONN_TO_SESSION on each connection it wants to use with the session. If the client wants to use additional connections for the fore channel, then it needs to call BIND_CONN_TO_SESSION if it specified SP4_SSV or SP4_MACH_CRED state protection when the client ID was created. </t> <t> At this point, the session has reached steady state. </t> </section><!-- Steps the Client Takes To Establish a Session --></section><!-- Session Mechanics - Steady State --><section anchor="session_inactive"title="Sessionnumbered="true" toc="default"> <name>Session InactivityTimer" >Timer</name> <t> The serverMAY<bcp14>MAY</bcp14> maintain a session inactivity timer for each session. If the session inactivity timer expires, then the serverMAY<bcp14>MAY</bcp14> destroy the session. To avoid losing a session due to inactivity, the clientMUST<bcp14>MUST</bcp14> renew the session inactivity timer. The length of session inactivity timerMUST NOT<bcp14>MUST NOT</bcp14> be less than the lease_time attribute (<xreftarget="attrdef_lease_time"/>).target="attrdef_lease_time" format="default"/>). As with lease renewal (<xreftarget="lease_renewal"/>),target="lease_renewal" format="default"/>), when the server receives a SEQUENCE operation, it resets the session inactivity timer, andMUST NOT<bcp14>MUST NOT</bcp14> allow the timer to expire while the rest of the operations in the COMPOUND procedure's request are still executing. Once the last operation has finished, the serverMUST<bcp14>MUST</bcp14> set the session inactivity timer to expire no sooner than the sum of the current time and the value of the lease_time attribute. </t> </section> <section anchor="Session_Mechanics_Recovery"title="Sessionnumbered="true" toc="default"> <name>Session Mechanics -Recovery">Recovery</name> <section anchor="Events_Requiring_Client_Action"title="Eventsnumbered="true" toc="default"> <name>Events Requiring ClientAction">Action</name> <t> The following events require client action to recover. </t> <sectiontitle="RPCSEC_GSSnumbered="true" toc="default"> <name>RPCSEC_GSS Context Loss by CallbackPath">Path</name> <t> If all RPCSEC_GSS handles granted by the client to the server for callback use have expired, the clientMUST<bcp14>MUST</bcp14> establish a new handle via BACKCHANNEL_CTL. The sr_status_flags field of the SEQUENCE results indicates when callback handles are nearly expired, or fully expired (see <xreftarget="OP_SEQUENCE_DESCRIPTION"/>).target="OP_SEQUENCE_DESCRIPTION" format="default"/>). </t> </section><!-- RPCSEC_GSS Context Loss by Callback_Path --><sectiontitle="Connection Loss">numbered="true" toc="default"> <name>Connection Loss</name> <t> If the client loses the last connection of the session and wants to retain the session, then it needs to create a new connection, and if, when the client ID was created, BIND_CONN_TO_SESSION was specified in the spo_must_enforce list, the clientMUST<bcp14>MUST</bcp14> use BIND_CONN_TO_SESSION to associate the connection with the session. </t> <t> If there was a request outstanding at the time of connection loss, then if the client wants to continue to use the session, itMUST<bcp14>MUST</bcp14> retry the request, as described in <xref target="Retry_and_Replay"/>.format="default"/>. Note that it is not necessary to retry requests over a connection with the same source network address or the same destination network address as the lost connection. As long as the session ID, slot ID, and sequence ID in the retry match that of the original request, the server will recognize the request as a retry if it executed the request prior to disconnect. </t> <t> If the connection that was lost was the last one associated with the backchannel, and the client wants to retain the backchannel and/or prevent revocation of recallable state, the client needs to reconnect, and if it does, itMUST<bcp14>MUST</bcp14> associate the connection to the session and backchannel via BIND_CONN_TO_SESSION. The serverSHOULD<bcp14>SHOULD</bcp14> indicate when it has no callback connection via the sr_status_flags result from SEQUENCE. </t> </section><!-- Connection Disconnect --><sectiontitle="Backchannelnumbered="true" toc="default"> <name>Backchannel GSS ContextLoss">Loss</name> <t> Via the sr_status_flags result of the SEQUENCE operation or other means, the client will learn if some or all of the RPCSEC_GSS contexts it assigned to the backchannel have been lost. If the client wants to retain the backchannel and/or not put recallable state subject to revocation, the client needs to use BACKCHANNEL_CTL to assign new contexts. </t> </section><!-- Backchannel GSS Context Loss --><section anchor="loss_of_session"title="Lossnumbered="true" toc="default"> <name>Loss ofSession">Session</name> <t> The replier might lose a record of the session. Causes include:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Replier failure and restart.</t> <t></li> <li> A catastrophe that causes the reply cache to be corrupted or lost on the media on which it was stored. This applies even if the replier indicated in the CREATE_SESSION results that it would persist the cache.</t> <t></li> <li> The server purges the session of a client that has been inactive for a very extended period of time.</t> <t></li> <li> As a result of configuration changes among a set of clustered servers, a network address previously connected to one server becomes connected to a different server that has no knowledge of the session in question. Such a configuration change will generally only happen when the original server ceases to function for a time.</t> </list></li> </ul> <t> Loss of reply cache is equivalent to loss of session. The replier indicates loss of session to the requester by returning NFS4ERR_BADSESSION on the next operation that uses the session ID that refers to the lost session. </t> <t> After an event like a server restart, the client may have lost its connections. The client assumes for the moment that the session has not been lost. It reconnects, and if it specified connection association enforcement when the session was created, it invokes BIND_CONN_TO_SESSION using the session ID. Otherwise, it invokes SEQUENCE. If BIND_CONN_TO_SESSION or SEQUENCE returns NFS4ERR_BADSESSION, the client knows the session is not available to it when communicating with that network address. If the connection survives session loss, then the next SEQUENCE operation the client sends over the connection will get back NFS4ERR_BADSESSION. The client again knows the session was lost. </t> <t> Here is one suggested algorithm for the client when it gets NFS4ERR_BADSESSION. It is not obligatory in that, if a client does not want to take advantage of such features as trunking, it may omit parts of it. However, it is a useful example that draws attention to various possible recovery issues:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> If the client has other connections to other server network addresses associated with the same session, attempt a COMPOUND with a single operation, SEQUENCE, on each of the other connections.</t> <t></li> <li> If the attempts succeed, the session is still alive, and this is a strong indicator that the server's network address has moved. The client might send an EXCHANGE_ID on the connection that returned NFS4ERR_BADSESSION to see if there are opportunities for client ID trunking (i.e., the same client ID andso_majorso_major_id value are returned). The client might use DNS to see if the moved network address was replaced with another, so that the performance and availability benefits of session trunking can continue.</t> <t></li> <li> If the SEQUENCE requests fail with NFS4ERR_BADSESSION, then the session no longer exists on any of the server network addresses for which the client has connections associated with that session ID. It is possible the session is still alive and available on other network addresses. The client sends an EXCHANGE_ID on all the connections to see if the server owner is still listening on those network addresses. If the same server owner is returned but a new client ID is returned, this is a strong indicator of a server restart. If both the same server owner and same client ID are returned, then this is a strong indication that the server did delete the session, and the client will need to send a CREATE_SESSION if it has no other sessions for that client ID. If a different server owner is returned, the client can use DNS to find other network addresses. If it does not, or if DNS does not find any other addresses for the server, then the client will be unable to provide NFSv4.1 service, and fatal errors should be returned to processes that were using the server. If the client is using a "mount" paradigm, unmounting the server is advised.</t> <t></li> <li> If the client knows of no other connections associated with the session ID and server network addresses that are, or have been, associated with the session ID, then the client can use DNS to find other network addresses. If it does not, or if DNS does not find any other addresses for the server, then the client will be unable to provide NFSv4.1 service, and fatal errors should be returned to processes that were using the server. If the client is using a "mount" paradigm, unmounting the server is advised.</t> </list> </t></li> </ol> <t> If there is a reconfiguration event that results in the same network address being assigned to servers where the eir_server_scope value is different, it cannot be guaranteed that a session ID generated by the first will be recognized as invalid by the first. Therefore, in managing server reconfigurations among servers with different server scope values, it is necessary to make sure that all clients have disconnected from the first server before effecting the reconfiguration. Nonetheless, clients should not assume that servers will always adhere to this requirement; clientsMUST<bcp14>MUST</bcp14> be prepared to deal with unexpected effects of server reconfigurations. Even where a session ID is inappropriately recognized as valid, it is likely either that the connection will not be recognized as valid or that a sequence value for a slot will not be correct. Therefore, when a client receives results indicating such unexpected errors, the use of EXCHANGE_ID to determine the current server configuration isRECOMMENDED.<bcp14>RECOMMENDED</bcp14>. </t> <t> A variation on the above is that after a server's network address moves, there is no NFSv4.1 server listening, e.g., no listener on port 2049. In this example, one of the following occur: the NFSv4 server returns NFS4ERR_MINOR_VERS_MISMATCH, the NFS server returns a PROG_MISMATCH error, the RPC listener on 2049 returns PROG_UNVAIL, or attempts to reconnect to the network address timeout. TheseSHOULD<bcp14>SHOULD</bcp14> be treated as equivalent to SEQUENCE returning NFS4ERR_BADSESSION for these purposes. </t> <t> When the client detects session loss, it needs to call CREATE_SESSION to recover. Any non-idempotent operations that were in progress might have been performed on the server at the time of session loss. The client has no general way to recover from this. </t> <t> Note that loss of session does not imply loss of byte-range lock, open, delegation, or layout state because locks, opens, delegations, and layouts are tied to the client ID and depend on the client ID, not the session. Nor does loss of byte-range lock, open, delegation, or layout state imply loss of session state, because the session depends on the client ID; loss of client ID however does imply loss of session, byte-range lock, open, delegation, and layout state. See <xref target="server_failure"/>.format="default"/>. A session can survive a server restart, but lock recovery may still be needed. </t> <t> It is possible that CREATE_SESSION will fail with NFS4ERR_STALE_CLIENTID (e.g., the server restarts and does not preserve client ID state). If so, the client needs to call EXCHANGE_ID, followed by CREATE_SESSION. </t> </section><!-- Loss of Session --></section><!-- Events Requiring Client Action --><section anchor="Events_Requiring_Server_Action"title="Eventsnumbered="true" toc="default"> <name>Events Requiring ServerAction">Action</name> <t> The following events require server action to recover. </t> <sectiontitle="Clientnumbered="true" toc="default"> <name>Client Crash andRestart">Restart</name> <t> As described in <xref target="OP_EXCHANGE_ID"/>,format="default"/>, a restarted client sends EXCHANGE_ID in such a way that it causes the server to delete any sessions it had. </t> </section><!-- Client Crash and Restart --><sectiontitle="Clientanchor="client_crash_no_restart" numbered="true" toc="default"> <name>Client Crash with NoRestart" anchor="client_crash_no_restart">Restart</name> <t> If a client crashes and never comes back, it will never send EXCHANGE_ID with its old client owner. Thus, the server has session state that will never be used again. After an extended period of time, and if the server has resource constraints, itMAY<bcp14>MAY</bcp14> destroy the old session as well as locking state. </t> </section><!-- Client Crash with No Restart --><sectiontitle="Extendednumbered="true" toc="default"> <name>Extended NetworkPartition">Partition</name> <t> To the server, the extended network partition may be no different from a client crash with no restart (see <xref target="client_crash_no_restart"/>).format="default"/>). Unless the server can discern that there is a network partition, it is free to treat the situation as if the client has crashed permanently. </t> </section><!-- "Extended Network Partition" --><sectiontitle="Backchannelnumbered="true" toc="default"> <name>Backchannel ConnectionLoss">Loss</name> <t> If there were callback requests outstanding at the time of a connection loss, then the serverMUST<bcp14>MUST</bcp14> retry the requests, as described in <xref target="Retry_and_Replay"/>.format="default"/>. Note that it is not necessary to retry requests over a connection with the same source network address or the same destination network address as the lost connection. As long as the session ID, slot ID, and sequence ID in the retry match that of the original request, the callback target will recognize the request as a retry even if it did see the request prior to disconnect. </t> <t> If the connection lost is the last one associated with the backchannel, then the serverMUST<bcp14>MUST</bcp14> indicate that in the sr_status_flags field of every SEQUENCE reply until the backchannel is re-established. There are two situations, each of which uses different status flags: no connectivity for the session's backchannel and no connectivity for any session backchannel of the client. See <xref target="OP_SEQUENCE"/>format="default"/> for a description of the appropriate flags in sr_status_flags. </t> </section><!-- Backchannel Connection Loss --><sectiontitle="GSSnumbered="true" toc="default"> <name>GSS ContextLoss">Loss</name> <t> The serverSHOULD<bcp14>SHOULD</bcp14> monitor when the number of RPCSEC_GSS handles assigned to the backchannel reaches one, and when that one handle is near expiry (i.e., between one and two periods of lease time), and indicate so in the sr_status_flags field of all SEQUENCE replies. The serverMUST<bcp14>MUST</bcp14> indicate when all of the backchannel's assigned RPCSEC_GSS handles have expired via the sr_status_flags field of all SEQUENCE replies. </t> </section><!-- GSS Context Loss --></section><!-- Events Requiring Server Action --></section><!-- Session Mechanics - Recovery --><sectiontitle="Parallelanchor="pnfs_and_sessions" numbered="true" toc="default"> <name>Parallel NFS andSessions" anchor="pnfs_and_sessions">Sessions</name> <t> A client and server can potentially be a non-pNFS implementation, a metadata server implementation, a data server implementation, or two or three types of implementations. The EXCHGID4_FLAG_USE_NON_PNFS, EXCHGID4_FLAG_USE_PNFS_MDS, and EXCHGID4_FLAG_USE_PNFS_DS flags (not mutually exclusive) are passed in the EXCHANGE_ID arguments and results to allow the client to indicate how it wants to use sessions created under the client ID, and to allow the server to indicate how it will allow the sessions to be used. See <xref target="pnfs_session_stuff"/>format="default"/> for pNFS sessions considerations. </t> </section><!-- Parallel NFS and Sessions --></section><!-- Session --></section><!-- Core Infrastructure --> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Protocolnumbered="true" toc="default"> <name>Protocol Constants and DataTypes">Types</name> <t> The syntax and semantics to describe the data types of the NFSv4.1 protocol are defined in the XDR<xref target="RFC4506">RFC 4506</xref>(<xref target="RFC4506" format="default">RFC 4506</xref>) and RPC<xref target="RFC5531">RFC 5531</xref>(<xref target="RFC5531" format="default">RFC 5531</xref>) documents. The next sections build upon the XDR data types to define constants, types, and structures specific to this protocol. The full list of XDR data types is in <xref target="RFC5662"/>.format="default"/>. </t> <sectiontitle="Basic Constants"> <figure> <artwork>numbered="true" toc="default"> <name>Basic Constants</name> <sourcecode type="xdr"><![CDATA[ const NFS4_FHSIZE = 128; const NFS4_VERIFIER_SIZE = 8; const NFS4_OPAQUE_LIMIT = 1024; const NFS4_SESSIONID_SIZE = 16; const NFS4_INT64_MAX = 0x7fffffffffffffff; const NFS4_UINT64_MAX = 0xffffffffffffffff; const NFS4_INT32_MAX = 0x7fffffff; const NFS4_UINT32_MAX = 0xffffffff; const NFS4_MAXFILELEN = 0xffffffffffffffff; const NFS4_MAXFILEOFF = 0xfffffffffffffffe;</artwork> </figure>]]></sourcecode> <t> Except where noted, all these constants are defined in bytes.<list style="symbols"> <t></t> <ul spacing="normal"> <li> NFS4_FHSIZE is the maximum size of a filehandle.</t> <t></li> <li> NFS4_VERIFIER_SIZE is the fixed size of a verifier.</t> <t></li> <li> NFS4_OPAQUE_LIMIT is the maximum size of certain opaque information.</t> <t></li> <li> NFS4_SESSIONID_SIZE is the fixed size of a session identifier.</t> <t></li> <li> NFS4_INT64_MAX is the maximum value of a signed 64-bit integer.</t> <t></li> <li> NFS4_UINT64_MAX is the maximum value of an unsigned 64-bit integer.</t> <t></li> <li> NFS4_INT32_MAX is the maximum value of a signed 32-bit integer.</t> <t></li> <li> NFS4_UINT32_MAX is the maximum value of an unsigned 32-bit integer.</t> <t></li> <li> NFS4_MAXFILELEN is the maximum length of a regular file.</t> <t></li> <li> NFS4_MAXFILEOFF is the maximum offset into a regular file.</t> </list> </t></li> </ul> </section> <sectiontitle="Basicnumbered="true" toc="default"> <name>Basic DataTypes">Types</name> <t> These are the base NFSv4.1 data types. </t><texttable anchor='basic_data_types'> <ttcol align='left'>Data Type</ttcol> <ttcol align='left'>Definition</ttcol> <c>int32_t</c> <c>typedef<table anchor="basic_data_types" align="center"> <thead> <tr> <th align="left">Data Type</th> <th align="left">Definition</th> </tr> </thead> <tbody> <tr> <td align="left">int32_t</td> <td align="left">typedef intint32_t;</c> <c>uint32_t</c> <c>typedefint32_t;</td> </tr> <tr> <td align="left">uint32_t</td> <td align="left">typedef unsigned intuint32_t;</c> <c>int64_t</c> <c>typedefuint32_t;</td> </tr> <tr> <td align="left">int64_t</td> <td align="left">typedef hyperint64_t;</c> <c>uint64_t</c> <c>typedefint64_t;</td> </tr> <tr> <td align="left">uint64_t</td> <td align="left">typedef unsigned hyperuint64_t;</c> <c>attrlist4</c> <c>typedefuint64_t;</td> </tr> <tr> <td align="left">attrlist4</td> <td align="left"><t>typedef opaqueattrlist4<>;</c> <c/> <c>Usedattrlist4<>;</t> <t>Used for file/directoryattributes.</c> <c>bitmap4</c> <c>typedefattributes.</t></td> </tr> <tr> <td align="left">bitmap4</td> <td align="left"><t>typedef uint32_tbitmap4<>;</c> <c/> <c>Usedbitmap4<>;</t> <t>Used in attribute arrayencoding.</c> <c>changeid4</c> <c>typedefencoding.</t> </td> </tr> <tr> <td align="left">changeid4</td> <td align="left"><t>typedef uint64_tchangeid4;</c> <c/> <c>Usedchangeid4;</t> <t>Used in the definition ofchange_info4.</c> <c>clientid4</c> <c>typedefchange_info4.</t> </td> </tr> <tr> <td align="left">clientid4</td> <td align="left"><t>typedef uint64_tclientid4;</c> <c/> <c>Shorthandclientid4;</t> <t>Shorthand reference to clientidentification.</c> <c>count4</c> <c>typedefidentification.</t> </td> </tr> <tr> <td align="left">count4</td> <td align="left"><t>typedef uint32_tcount4;</c> <c/> <c>Variouscount4;</t> <t>Various count parameters (READ, WRITE,COMMIT).</c> <c>length4</c> <c>typedefCOMMIT).</t> </td> </tr> <tr> <td align="left">length4</td> <td align="left"><t>typedef uint64_tlength4;</c> <c/> <c>Thelength4;</t> <t>The length of a byte-range within afile.</c> <c>mode4</c> <c>typedeffile.</t> </td> </tr> <tr> <td align="left">mode4</td> <td align="left"><t>typedef uint32_tmode4;</c> <c/> <c>Modemode4;</t> <t>Mode attribute datatype.</c> <c>nfs_cookie4</c> <c>typedeftype.</t> </td> </tr> <tr> <td align="left">nfs_cookie4</td> <td align="left"><t>typedef uint64_tnfs_cookie4;</c> <c/> <c>Opaquenfs_cookie4;</t> <t>Opaque cookie value forREADDIR.</c> <c>nfs_fh4</c> <c>typedefREADDIR.</t> </td> </tr> <tr> <td align="left">nfs_fh4</td> <td align="left"><t>typedef opaquenfs_fh4<NFS4_FHSIZE>;</c> <c/> <c>Filehandle definition.</c> <c>nfs_ftype4</c> <c>enum nfs_ftype4;</c> <c/> <c>Variousnfs_fh4<NFS4_FHSIZE>;</t> <t>Filehandle definition.</t> </td> </tr> <tr> <td align="left">nfs_ftype4</td> <td align="left"><t>enum nfs_ftype4;</t> <t>Various defined filetypes.</c> <c>nfsstat4</c> <c>enum nfsstat4;</c> <c/> <c>Return value for operations.</c> <c>offset4</c> <c>typedeftypes.</t> </td> </tr> <tr> <td align="left">nfsstat4</td> <td align="left"><t>enum nfsstat4;</t> <t>Return value for operations.</t> </td> </tr> <tr> <td align="left">offset4</td> <td align="left"><t>typedef uint64_toffset4;</c> <c/> <c>Variousoffset4;</t> <t>Various offset designations (READ, WRITE, LOCK,COMMIT).</c> <c>qop4</c> <c>typedefCOMMIT).</t> </td> </tr> <tr> <td align="left">qop4</td> <td align="left"><t>typedef uint32_tqop4;</c> <c/> <c>Qualityqop4;</t> <t>Quality of protection designation inSECINFO.</c> <c>sec_oid4</c> <c>typedefSECINFO.</t> </td> </tr> <tr> <td align="left">sec_oid4</td> <td align="left"><t>typedef opaquesec_oid4<>;</c> <c/> <c>Securitysec_oid4<>;</t> <t>Security Object Identifier. The sec_oid4 data type is not really opaque. Instead, it contains an ASN.1 OBJECT IDENTIFIER as used by GSS-API in the mech_type argument to GSS_Init_sec_context. See <xref target="RFC2743"/>format="default"/> fordetails.</c> <c>sequenceid4</c> <c>typedefdetails.</t> </td> </tr> <tr> <td align="left">sequenceid4</td> <td align="left"><t>typedef uint32_tsequenceid4;</c> <c/> <c>Sequencesequenceid4;</t> <t>Sequence number used for various session operations (EXCHANGE_ID, CREATE_SESSION, SEQUENCE,CB_SEQUENCE).</c> <c>seqid4</c> <c>typedefCB_SEQUENCE).</t> </td> </tr> <tr> <td align="left">seqid4</td> <td align="left"><t>typedef uint32_tseqid4;</c> <c/> <c>Sequenceseqid4;</t> <t>Sequence identifier used forlocking.</c> <c>sessionid4</c> <c>typedeflocking.</t> </td> </tr> <tr> <td align="left">sessionid4</td> <td align="left"><t>typedef opaquesessionid4[NFS4_SESSIONID_SIZE];</c> <c/> <c>Session identifier.</c> <c>slotid4</c> <c>typedefsessionid4[NFS4_SESSIONID_SIZE];</t> <t>Session identifier.</t> </td> </tr> <tr> <td align="left">slotid4</td> <td align="left"><t>typedef uint32_tslotid4;</c> <c/> <c>Sequencingslotid4;</t> <t>Sequencing artifact for various session operations (SEQUENCE,CB_SEQUENCE).</c> <c>utf8string</c> <c>typedefCB_SEQUENCE).</t> </td> </tr> <tr> <td align="left">utf8string</td> <td align="left"><t>typedef opaqueutf8string<>;</c> <c/> <c>UTF-8utf8string<>;</t> <t>UTF-8 encoding forstrings.</c> <c>utf8str_cis</c> <c>typedefstrings.</t> </td> </tr> <tr> <td align="left">utf8str_cis</td> <td align="left"><t>typedef utf8stringutf8str_cis;</c> <c/> <c>Case-insensitiveutf8str_cis;</t> <t>Case-insensitive UTF-8string.</c> <c>utf8str_cs</c> <c>typedefstring.</t> </td> </tr> <tr> <td align="left">utf8str_cs</td> <td align="left"><t>typedef utf8stringutf8str_cs;</c> <c/> <c>Case-sensitiveutf8str_cs;</t> <t>Case-sensitive UTF-8string.</c> <c>utf8str_mixed</c> <c>typedefstring.</t> </td> </tr> <tr> <td align="left">utf8str_mixed</td> <td align="left"><t>typedef utf8stringutf8str_mixed;</c> <c/> <c>UTF-8utf8str_mixed;</t> <t>UTF-8 strings with a case-sensitive prefix and a case-insensitivesuffix.</c> <c>component4</c> <c>typedefsuffix.</t> </td> </tr> <tr> <td align="left">component4</td> <td align="left"><t>typedef utf8str_cscomponent4;</c> <c/> <c>Representscomponent4;</t> <t>Represents pathnamecomponents.</c> <c>linktext4</c> <c>typedefcomponents.</t> </td> </tr> <tr> <td align="left">linktext4</td> <td align="left"><t>typedef utf8str_cslinktext4;</c> <c/> <c>Symboliclinktext4;</t> <t>Symbolic link contents ("symbolic link" is defined in an <xreftarget="symlink">Opentarget="symlink" format="default">Open Group</xref>standard).</c> <c>pathname4</c> <c>typedefstandard).</t> </td> </tr> <tr> <td align="left">pathname4</td> <td align="left"><t>typedef component4pathname4<>;</c> <c/> <c>Representspathname4<>;</t> <t>Represents pathname forfs_locations.</c> <c>verifier4</c> <c>typedeffs_locations.</t> </td> </tr> <tr> <td align="left">verifier4</td> <td align="left"><t>typedef opaqueverifier4[NFS4_VERIFIER_SIZE];</c> <c/> <c>Verifierverifier4[NFS4_VERIFIER_SIZE];</t> <t>Verifier used for various operations (COMMIT, CREATE, EXCHANGE_ID, OPEN, READDIR, WRITE) NFS4_VERIFIER_SIZE is defined as8.</c> <postamble>End8.</t> </td> </tr> </tbody> </table> <t>End of Base DataTypes</postamble> </texttable>Types</t> </section><!-- start here for the structured data types --><sectiontitle="Structurednumbered="true" toc="default"> <name>Structured DataTypes">Types</name> <section toc="exclude" anchor="nfstime4"title="nfstime4"> <figure> <artwork>numbered="true"> <name>nfstime4</name> <sourcecode type="xdr"><![CDATA[ struct nfstime4 { int64_t seconds; uint32_t nseconds; };</artwork> </figure>]]></sourcecode> <t> The nfstime4 data type gives the number of seconds and nanoseconds since midnight or zero hour January 1, 1970 Coordinated Universal Time (UTC). Values greater than zero for the seconds field denote dates after the zero hour January 1, 1970. Values less than zero for the seconds field denote dates before the zero hour January 1, 1970. In both cases, the nseconds field is to be added to the seconds field for the final time representation. For example, if the time to be represented is one-half second before zero hour January 1, 1970, the seconds field would have a value of negative one (-1) and the nseconds field would have a value of one-half second (500000000). Values greater than 999,999,999 for nseconds are invalid. </t> <t> This data type is used to pass time and date information. A server converts to and from its local representation of time when processing time values, preserving as much accuracy as possible. If the precision of timestamps stored for a file system object is less than defined, loss of precision can occur. An adjunct time maintenance protocol isRECOMMENDED<bcp14>RECOMMENDED</bcp14> to reduce client and server time skew. </t> </section> <section toc="exclude" anchor="time_how4"title="time_how4"> <figure> <artwork>numbered="true"> <name>time_how4</name> <sourcecode type="xdr"><![CDATA[ enum time_how4 { SET_TO_SERVER_TIME4 = 0, SET_TO_CLIENT_TIME4 = 1 };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="settime4"title="settime4"> <figure> <artwork>numbered="true"> <name>settime4</name> <sourcecode type="xdr"><![CDATA[ union settime4 switch (time_how4 set_it) { case SET_TO_CLIENT_TIME4: nfstime4 time; default: void; };</artwork> </figure>]]></sourcecode> <t> The time_how4 and settime4 data types are used for setting timestamps in file object attributes. If set_it is SET_TO_SERVER_TIME4, then the server uses its local representation of time for the time value. </t> </section> <section toc="exclude" anchor="specdata4"title="specdata4"> <figure> <artwork>numbered="true"> <name>specdata4</name> <sourcecode type="xdr"><![CDATA[ struct specdata4 { uint32_t specdata1; /* major device number */ uint32_t specdata2; /* minor device number */ };</artwork> </figure>]]></sourcecode> <t> This data type represents the device numbers for the device file types NF4CHR and NF4BLK. </t> </section> <section toc="exclude" anchor="fsid4"title="fsid4"> <figure> <artwork>numbered="true"> <name>fsid4</name> <sourcecode type="xdr"><![CDATA[ struct fsid4 { uint64_t major; uint64_t minor; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="chg_policy4"title="change_policy4"> <figure> <artwork>numbered="true"> <name>change_policy4</name> <sourcecode type="xdr"><![CDATA[ struct change_policy4 { uint64_t cp_major; uint64_t cp_minor; };</artwork> </figure>]]></sourcecode> <t> The change_policy4 data type is used for the change_policyRECOMMENDED<bcp14>RECOMMENDED</bcp14> attribute. It provides change sequencing indication analogous to the change attribute. To enable the server to present a value valid across server re-initialization without requiring persistent storage, two 64-bit quantities are used, allowing one to be a server instance ID and the second to be incremented non-persistently, within a given server instance. </t> </section> <section toc="exclude" anchor="fattr4"title="fattr4"> <figure> <artwork>numbered="true"> <name>fattr4</name> <sourcecode type="xdr"><![CDATA[ struct fattr4 { bitmap4 attrmask; attrlist4 attr_vals; };</artwork> </figure>]]></sourcecode> <t> The fattr4 data type is used to represent file and directory attributes. </t> <t> The bitmap is a counted array of 32-bit integers used to contain bit values. The position of the integer in the array that contains bit n can be computed from the expression (n / 32), and its bit within that integer is (n mod 32). </t><t> <figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 +-----------+-----------+-----------+-- | count | 31 .. 0 | 63 .. 32 | +-----------+-----------+-----------+--</artwork> </figure> </t>]]></artwork> </section> <section toc="exclude" anchor="change_info4"title="change_info4"> <figure> <artwork>numbered="true"> <name>change_info4</name> <sourcecode type="xdr"><![CDATA[ struct change_info4 { bool atomic; changeid4 before; changeid4 after; };</artwork> </figure>]]></sourcecode> <t> This data type is used with the CREATE, LINK, OPEN, REMOVE, and RENAME operations to let the client know the value of the change attribute for the directory in which the target file system object resides. </t> </section> <section toc="exclude" anchor="netaddr4"title="netaddr4"> <figure> <artwork>numbered="true"> <name>netaddr4</name> <sourcecode type="xdr"><![CDATA[ struct netaddr4 { /* see struct rpcb in RFC 1833 */ stringna_r_netid<>;na_r_netid<>; /* network id */ stringna_r_addr<>;na_r_addr<>; /* universal address */ };</artwork> </figure>]]></sourcecode> <t> The netaddr4 data type is used to identify network transport endpoints. The na_r_netid and na_r_addr fields respectively contain a netid and uaddr. The netid and uaddr concepts are defined in <xreftarget="RFC5665"/>.target="RFC5665" format="default"/>. The netid and uaddr formats for TCP over IPv4 and TCP over IPv6 are defined in <xreftarget="RFC5665"/>,target="RFC5665" format="default"/>, specifically Tables 2 and 3 and in Sections5.2.3.3<xref target="RFC5665" section="5.2.3.3" sectionFormat="bare"/> and5.2.3.4.<xref target="RFC5665" section="5.2.3.4" sectionFormat="bare"/>. </t> </section> <section toc="exclude" anchor="state_owner4"title="state_owner4"> <figure> <artwork>numbered="true"> <name>state_owner4</name> <sourcecode type="xdr"><![CDATA[ struct state_owner4 { clientid4 clientid; opaqueowner<NFS4_OPAQUE_LIMIT>;owner<NFS4_OPAQUE_LIMIT>; }; typedef state_owner4 open_owner4; typedef state_owner4 lock_owner4;</artwork> </figure>]]></sourcecode> <t> The state_owner4 data type is the base type for the open_owner4 (<xref target="open_owner4"/>)format="default"/>) and lock_owner4 (<xref target="lock_owner4"/>).format="default"/>). </t> <section toc="exclude" anchor="open_owner4"title="open_owner4">numbered="true"> <name>open_owner4</name> <t> This data type is used to identify the owner of OPEN state. </t> </section> <section toc="exclude" anchor="lock_owner4"title="lock_owner4">numbered="true"> <name>lock_owner4</name> <t> This structure is used to identify the owner of byte-range locking state. </t> </section> </section> <section toc="exclude" anchor="open_to_lock_owner4"title="open_to_lock_owner4"> <figure> <artwork>numbered="true"> <name>open_to_lock_owner4</name> <sourcecode type="xdr"><![CDATA[ struct open_to_lock_owner4 { seqid4 open_seqid; stateid4 open_stateid; seqid4 lock_seqid; lock_owner4 lock_owner; };</artwork> </figure>]]></sourcecode> <t> This data type is used for the first LOCK operation done for an open_owner4. It provides both the open_stateid and lock_owner, such that the transition is made from a valid open_stateid sequence to that of the new lock_stateid sequence. Using this mechanism avoids the confirmation of the lock_owner/lock_seqid pair since it is tied to established state in the form of the open_stateid/open_seqid. </t> </section> <section toc="exclude" anchor="stateid4"title="stateid4"> <figure> <artwork>numbered="true"> <name>stateid4</name> <sourcecode type="xdr"><![CDATA[ struct stateid4 { uint32_t seqid; opaque other[12]; };</artwork> </figure>]]></sourcecode> <t> This data type is used for the various state sharing mechanisms between the client and server. The client never modifies a value of data type stateid. The starting value of the "seqid" field is undefined. The server is required to increment the "seqid" field by one at each transition of the stateid. This is important since the client will inspect the seqid in OPEN stateids to determine the order of OPEN processing done by the server. </t> </section> <section toc="exclude" anchor="layouttype4"title="layouttype4"> <figure> <artwork>numbered="true"> <name>layouttype4</name> <sourcecode type="xdr"><![CDATA[ enum layouttype4 { LAYOUT4_NFSV4_1_FILES = 0x1, LAYOUT4_OSD2_OBJECTS = 0x2, LAYOUT4_BLOCK_VOLUME = 0x3 };</artwork> </figure>]]></sourcecode> <t> This data type indicates what type of layout is being used. The file server advertises the layout types it supports through the fs_layout_type file system attribute (<xref target="attrdef_fs_layout_type"/>).format="default"/>). A client asks for layouts of a particular type in LAYOUTGET, and processes those layouts in its layout-type-specific logic. </t> <t> The layouttype4 data type is 32 bits in length. The range represented by the layout type is split into three parts. Type 0x0 is reserved. Types within the range 0x00000001-0x7FFFFFFF are globally unique and are assigned according to the description in <xref target="pnfsiana"/>;format="default"/>; they are maintained by IANA. Types within the range 0x80000000-0xFFFFFFFF are site specific and for private use only. </t> <t> The LAYOUT4_NFSV4_1_FILES enumeration specifies that the NFSv4.1 file layout type, as defined in <xref target="file_layout_type"/>,format="default"/>, is to be used. The LAYOUT4_OSD2_OBJECTS enumeration specifies that the object layout, as defined in <xref target="RFC5664"/>,format="default"/>, is to be used. Similarly, the LAYOUT4_BLOCK_VOLUME enumeration specifies that the block/volume layout, as defined in <xref target="RFC5663"/>,format="default"/>, is to be used. </t> </section> <section toc="exclude" anchor="deviceid4"title="deviceid4"> <figure> <artwork>numbered="true"> <name>deviceid4</name> <sourcecode type="xdr"><![CDATA[ const NFS4_DEVICEID4_SIZE = 16; typedef opaque deviceid4[NFS4_DEVICEID4_SIZE];</artwork> </figure>]]></sourcecode> <t> Layout information includes device IDs that specify a storage device through a compact handle. Addressing and type information is obtained with the GETDEVICEINFO operation. Device IDs are not guaranteed to be valid across metadata server restarts. A device ID is unique per client ID and layout type. See <xref target="device_ids"/>format="default"/> for more details. </t> </section> <section toc="exclude" anchor="device_addr4"title="device_addr4"> <figure> <artwork>numbered="true"> <name>device_addr4</name> <sourcecode type="xdr"><![CDATA[ struct device_addr4 { layouttype4 da_layout_type; opaqueda_addr_body<>;da_addr_body<>; };</artwork> </figure>]]></sourcecode> <t> The device address is used to set up a communication channel with the storage device. Different layout types will require different data types to define how they communicate with storage devices. The opaque da_addr_body field is interpreted based on the specified da_layout_type field. </t> <t> This document defines the device address for the NFSv4.1 file layout (see <xref target="file_data_types"/>),format="default"/>), which identifies a storage device by network IP address and port number. This is sufficient for the clients to communicate with the NFSv4.1 storage devices, and may be sufficient for other layout types as well. Device types for object-based storage devices and block storage devices (e.g., Small Computer System Interface (SCSI) volume labels) are defined by their respective layout specifications. </t> </section> <section toc="exclude" anchor="layout_content4"title="layout_content4"> <figure> <artwork>numbered="true"> <name>layout_content4</name> <sourcecode type="xdr"><![CDATA[ struct layout_content4 { layouttype4 loc_type; opaqueloc_body<>;loc_body<>; };</artwork> </figure>]]></sourcecode> <t> The loc_body field is interpreted based on the layout type (loc_type). This document defines the loc_body for the NFSv4.1 file layout type; see <xref target="file_data_types"/>format="default"/> for its definition. </t> </section> <section toc="exclude" anchor="layout4"title="layout4"> <figure> <artwork>numbered="true"> <name>layout4</name> <sourcecode type="xdr"><![CDATA[ struct layout4 { offset4 lo_offset; length4 lo_length; layoutiomode4 lo_iomode; layout_content4 lo_content; };</artwork> </figure>]]></sourcecode> <t> The layout4 data type defines a layout for a file. The layout type specific data is opaque within lo_content. Since layouts are sub-dividable, the offset and length together with the file's filehandle, the client ID, iomode, and layout type identify the layout. </t> </section> <section toc="exclude" anchor="layoutupdate4"title="layoutupdate4"> <figure> <artwork>numbered="true"> <name>layoutupdate4</name> <sourcecode type="xdr"><![CDATA[ struct layoutupdate4 { layouttype4 lou_type; opaquelou_body<>;lou_body<>; };</artwork> </figure>]]></sourcecode> <t> The layoutupdate4 data type is used by the client to return updated layout information to the metadata server via the LAYOUTCOMMIT (<xref target="OP_LAYOUTCOMMIT"/>)format="default"/>) operation. This data type provides a channel to pass layout type specific information (in field lou_body) back to the metadata server. For example, for the block/volume layout type, this could include the list of reserved blocks that were written. The contents of the opaque lou_body argument are determined by the layout type. The NFSv4.1 file-based layout does not use this data type; if lou_type is LAYOUT4_NFSV4_1_FILES, the lou_body fieldMUST<bcp14>MUST</bcp14> have a zero length. </t> </section> <section toc="exclude" anchor="layouthint4"title="layouthint4"> <figure> <artwork>numbered="true"> <name>layouthint4</name> <sourcecode type="xdr"><![CDATA[ struct layouthint4 { layouttype4 loh_type; opaqueloh_body<>;loh_body<>; };</artwork> </figure>]]></sourcecode> <t> The layouthint4 data type is used by the client to pass in a hint about the type of layout it would like created for a particular file. It is the data type specified by the layout_hint attribute described in <xref target="attrdef_layout_hint"/>.format="default"/>. The metadata server may ignore the hint or may selectively ignore fields within the hint. This hint should be provided at create time as part of the initial attributes within OPEN. The loh_body field is specific to the type of layout (loh_type). The NFSv4.1 file-based layout uses the nfsv4_1_file_layouthint4 data type as defined in <xref target="file_data_types"/>.format="default"/>. </t> </section> <section toc="exclude" anchor="layoutiomode4"title="layoutiomode4"> <figure> <artwork>numbered="true"> <name>layoutiomode4</name> <sourcecode type="xdr"><![CDATA[ enum layoutiomode4 { LAYOUTIOMODE4_READ = 1, LAYOUTIOMODE4_RW = 2, LAYOUTIOMODE4_ANY = 3 };</artwork> </figure>]]></sourcecode> <t> The iomode specifies whether the client intends to just read or both read and write the data represented by the layout. While the LAYOUTIOMODE4_ANY iomodeMUST NOT<bcp14>MUST NOT</bcp14> be used in the arguments to the LAYOUTGET operation, itMAY<bcp14>MAY</bcp14> be used in the arguments to the LAYOUTRETURN and CB_LAYOUTRECALL operations. The LAYOUTIOMODE4_ANY iomode specifies that layouts pertaining to both LAYOUTIOMODE4_READ and LAYOUTIOMODE4_RW iomodes are being returned or recalled, respectively. The metadata server's use of the iomode may depend on the layout type being used. The storage devicesMAY<bcp14>MAY</bcp14> validate I/O accesses against the iomode and reject invalid accesses. </t> </section> <section toc="exclude" anchor="nfs_impl_id4"title="nfs_impl_id4"> <figure> <artwork>numbered="true"> <name>nfs_impl_id4</name> <sourcecode type="xdr"><![CDATA[ struct nfs_impl_id4 { utf8str_cis nii_domain; utf8str_cs nii_name; nfstime4 nii_date; };</artwork> </figure>]]></sourcecode> <t> This data type is used to identify client and server implementation details. The nii_domain field is the DNS domain name with which the implementor is associated. The nii_name field is the product name of the implementation and is completely free form. It isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the nii_name be used to distinguish machine architecture, machine platforms, revisions, versions, and patch levels. The nii_date field is the timestamp of when the software instance was published or built. </t> </section> <section toc="exclude" anchor="threshold_item4"title="threshold_item4"> <figure> <artwork>numbered="true"> <name>threshold_item4</name> <sourcecode type="xdr"><![CDATA[ struct threshold_item4 { layouttype4 thi_layout_type; bitmap4 thi_hintset; opaquethi_hintlist<>;thi_hintlist<>; };</artwork> </figure>]]></sourcecode> <t> This data type contains a list of hints specific to a layout type for helping the client determine when it should send I/O directly through the metadata server versus the storage devices. The data type consists of the layout type (thi_layout_type), a bitmap (thi_hintset) describing the set of hints supported by the server (they may differ based on the layout type), and a list of hints (thi_hintlist) whose content is determined by the hintset bitmap. See the mdsthreshold attribute for more details. </t> <t> The thi_hintset field is a bitmap of the following values: </t><texttable> <ttcol align='left'>name</ttcol> <ttcol align='left'>#</ttcol> <ttcol align='left'>Data Type</ttcol> <ttcol align='left'>Description</ttcol> <c>threshold4_read_size</c><c>0</c><c>length4</c> <c><table align="center" anchor="table2"> <thead> <tr> <th align="left">name</th> <th align="left">#</th> <th align="left">Data Type</th> <th align="left">Description</th> </tr> </thead> <tbody> <tr> <td align="left">threshold4_read_size</td> <td align="left">0</td> <td align="left">length4</td> <td align="left"> If a file's length is less than the value of threshold4_read_size, then it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the client read from the file via the MDS and not a storage device.</c> <c>threshold4_write_size</c><c>1</c><c>length4</c> <c></td> </tr> <tr> <td align="left">threshold4_write_size</td> <td align="left">1</td> <td align="left">length4</td> <td align="left"> If a file's length is less than the value of threshold4_write_size, then it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the client write to the file via the MDS and not a storage device.</c> <c>threshold4_read_iosize</c><c>2</c><c>length4</c> <c></td> </tr> <tr> <td align="left">threshold4_read_iosize</td> <td align="left">2</td> <td align="left">length4</td> <td align="left"> For read I/O sizes below this threshold, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> to read data through the MDS.</c> <c>threshold4_write_iosize</c><c>3</c><c>length4</c> <c></td> </tr> <tr> <td align="left">threshold4_write_iosize</td> <td align="left">3</td> <td align="left">length4</td> <td align="left"> For write I/O sizes below this threshold, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> to write data through the MDS.</c> </texttable></td> </tr> </tbody> </table> </section> <section toc="exclude" anchor="mdsthreshold4"title="mdsthreshold4"> <figure> <artwork>numbered="true"> <name>mdsthreshold4</name> <sourcecode type="xdr"><![CDATA[ struct mdsthreshold4 { threshold_item4mth_hints<>;mth_hints<>; };</artwork> </figure>]]></sourcecode> <t> This data type holds an array of elements of data type threshold_item4, each of which is valid for a particular layout type. An array is necessary because a server can support multiple layout types for a single file. </t> </section> </section> </section><!-- End of Data Types --> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="Filehandles"title="Filehandles">numbered="true" toc="default"> <name>Filehandles</name> <t> The filehandle in the NFS protocol is a per-server unique identifier for a file system object. The contents of the filehandle are opaque to the client. Therefore, the server is responsible for translating the filehandle to an internal representation of the file system object. </t> <sectiontitle="Obtainingnumbered="true" toc="default"> <name>Obtaining the FirstFilehandle">Filehandle</name> <t> The operations of the NFS protocol are defined in terms of one or more filehandles. Therefore, the client needs a filehandle to initiate communication with the server. With the NFSv3 protocol (<xreftarget="RFC1813">RFCtarget="RFC1813" format="default">RFC 1813</xref>), there exists an ancillary protocol to obtain this first filehandle. The MOUNT protocol, RPC program number 100005, provides the mechanism of translating a string-based file system pathname to a filehandle, which can then be used by the NFS protocols. </t> <t> The MOUNT protocol has deficiencies in the area of security and use via firewalls. This is one reason that the use of the public filehandle was introduced in <xreftarget="RFC2054">RFCtarget="RFC2054" format="default">RFC 2054</xref> and <xreftarget="RFC2055">RFCtarget="RFC2055" format="default">RFC 2055</xref>. With the use of the public filehandle in combination with the LOOKUP operation in the NFSv3 protocol, it has been demonstrated that the MOUNT protocol is unnecessary for viable interaction between NFS client and server. </t> <t> Therefore, the NFSv4.1 protocol will not use an ancillary protocol for translation from string-based pathnames to a filehandle. Two special filehandles will be used as starting points for the NFS client. </t> <sectiontitle="Root Filehandle">numbered="true" toc="default"> <name>Root Filehandle</name> <t> The first of the special filehandles is the ROOT filehandle. The ROOT filehandle is the "conceptual" root of the file system namespace at the NFS server. The client uses or starts with the ROOT filehandle by employing the PUTROOTFH operation. The PUTROOTFH operation instructs the server to set the "current" filehandle to the ROOT of the server's file tree. Once this PUTROOTFH operation is used, the client can then traverse the entirety of the server's file tree with the LOOKUP operation. A complete discussion of the server namespace is in <xreftarget="single_server_namespace"/>.target="single_server_namespace" format="default"/>. </t> </section> <sectiontitle="Public Filehandle">numbered="true" toc="default"> <name>Public Filehandle</name> <t> The second special filehandle is the PUBLIC filehandle. Unlike the ROOT filehandle, the PUBLIC filehandle may be bound or represent an arbitrary file system object at the server. The server is responsible for this binding. It may be that the PUBLIC filehandle and the ROOT filehandle refer to the same file system object. However, it is up to the administrative software at the server and the policies of the server administrator to define the binding of the PUBLIC filehandle and server file system object. The client may not make any assumptions about this binding. The client uses the PUBLIC filehandle via the PUTPUBFH operation. </t> </section> </section> <sectiontitle="Filehandle Types">numbered="true" toc="default"> <name>Filehandle Types</name> <t> In the NFSv3 protocol, there was one type of filehandle with a single set of semantics. This type of filehandle is termed "persistent" in NFSv4.1. The semantics of a persistent filehandle remain the same as before. A new type of filehandle introduced in NFSv4.1 is the "volatile" filehandle, which attempts to accommodate certain server environments. </t> <t> The volatile filehandle type was introduced to address server functionality or implementation issues that make correct implementation of a persistent filehandle infeasible. Some server environments do not provide a file-system-level invariant that can be used to construct a persistent filehandle. The underlying server file system may not provide the invariant or the server's file system programming interfaces may not provide access to the needed invariant. Volatile filehandles may ease the implementation of server functionality such as hierarchical storage management or file system reorganization or migration. However, the volatile filehandle increases the implementation burden for the client. </t> <t> Since the client will need to handle persistent and volatile filehandles differently, a file attribute is defined that may be used by the client to determine the filehandle types being returned by the server. </t> <sectiontitle="Generalnumbered="true" toc="default"> <name>General Properties of aFilehandle">Filehandle</name> <t> The filehandle contains all the information the server needs to distinguish an individual file. To the client, the filehandle is opaque. The client stores filehandles for use in a later request and can compare two filehandles from the same server for equality by doing a byte-by-byte comparison. However, the clientMUST NOT<bcp14>MUST NOT</bcp14> otherwise interpret the contents of filehandles. If two filehandles from the same server are equal, theyMUST<bcp14>MUST</bcp14> refer to the same file. ServersSHOULD<bcp14>SHOULD</bcp14> try to maintain a one-to-one correspondence between filehandles and files, but this is not required. ClientsMUST<bcp14>MUST</bcp14> use filehandle comparisons only to improve performance, not for correct behavior. All clients need to be prepared for situations in which it cannot be determined whether two filehandles denote the same object and in such cases, avoid making invalid assumptions that might cause incorrect behavior. Further discussion of filehandle and attribute comparison in the context of data caching is presented in <xreftarget="data_caching_and_file_identity"/>.target="data_caching_and_file_identity" format="default"/>. </t> <t> As an example, in the case that two different pathnames when traversed at the server terminate at the same file system object, the serverSHOULD<bcp14>SHOULD</bcp14> return the same filehandle for each path. This can occur if a hard link (see <xreftarget="hardlink"/>)target="hardlink" format="default"/>) is used to create two file names that refer to the same underlying file object and associated data. For example, if paths /a/b/c and /a/d/c refer to the same file, the serverSHOULD<bcp14>SHOULD</bcp14> return the same filehandle for both pathnames' traversals. </t> </section> <sectiontitle="Persistent Filehandle">numbered="true" toc="default"> <name>Persistent Filehandle</name> <t> A persistent filehandle is defined as having a fixed value for the lifetime of the file system object to which it refers. Once the server creates the filehandle for a file system object, the serverMUST<bcp14>MUST</bcp14> accept the same filehandle for the object for the lifetime of the object. If the server restarts, the NFS serverMUST<bcp14>MUST</bcp14> honor the same filehandle value as it did in the server's previous instantiation. Similarly, if the file system is migrated, the new NFS serverMUST<bcp14>MUST</bcp14> honor the same filehandle as the old NFS server. </t> <t> The persistent filehandle will be become stale or invalid when the file system object is removed. When the server is presented with a persistent filehandle that refers to a deleted object, itMUST<bcp14>MUST</bcp14> return an error of NFS4ERR_STALE. A filehandle may become stale when the file system containing the object is no longer available. The file system may become unavailable if it exists on removable media and the media is no longer available at the server or the file system in whole has been destroyed or the file system has simply been removed from the server's namespace (i.e., unmounted in a UNIX environment). </t> </section> <sectiontitle="Volatile Filehandle">numbered="true" toc="default"> <name>Volatile Filehandle</name> <t> A volatile filehandle does not share the same longevity characteristics of a persistent filehandle. The server may determine that a volatile filehandle is no longer valid at many different points in time. If the server can definitively determine that a volatile filehandle refers to an object that has been removed, the server should return NFS4ERR_STALE to the client (as is the case for persistent filehandles). In all other cases where the server determines that a volatile filehandle can no longer be used, it should return an error of NFS4ERR_FHEXPIRED. </t> <t> TheREQUIRED<bcp14>REQUIRED</bcp14> attribute "fh_expire_type" is used by the client to determine what type of filehandle the server is providing for a particular file system. This attribute is a bitmask with the following values: </t><t> <list style="hanging"> <t hangText="FH4_PERSISTENT"><dl newline="false" spacing="normal"> <dt>FH4_PERSISTENT</dt> <dd> The value of FH4_PERSISTENT is used to indicate a persistent filehandle, which is valid until the object is removed from the file system. The server will not return NFS4ERR_FHEXPIRED for this filehandle. FH4_PERSISTENT is defined as a value in which none of the bits specified below are set.</t> <t hangText="FH4_VOLATILE_ANY"></dd> <dt>FH4_VOLATILE_ANY</dt> <dd> The filehandle may expire at any time, except as specifically excluded (i.e., FH4_NO_EXPIRE_WITH_OPEN).</t> <t hangText="FH4_NOEXPIRE_WITH_OPEN"></dd> <dt>FH4_NOEXPIRE_WITH_OPEN</dt> <dd> May only be set when FH4_VOLATILE_ANY is set. If this bit is set, then the meaning of FH4_VOLATILE_ANY is qualified to exclude any expiration of the filehandle when it is open.</t> <t hangText="FH4_VOL_MIGRATION"></dd> <dt>FH4_VOL_MIGRATION</dt> <dd> The filehandle will expire as a result of a file system transition (migration or replication), in those cases in which the continuity of filehandle use is not specified by handle class information within the fs_locations_info attribute. When this bit is set, clients without access to fs_locations_info information should assume that filehandles will expire on file system transitions.</t> <t hangText="FH4_VOL_RENAME"></dd> <dt>FH4_VOL_RENAME</dt> <dd> The filehandle will expire during rename. This includes a rename by the requesting client or a rename by any other client. If FH4_VOL_ANY is set, FH4_VOL_RENAME is redundant.</t> </list> </t></dd> </dl> <t> Servers that provide volatile filehandles that can expire while open require special care as regards handling of RENAMEs and REMOVEs. This situation can arise if FH4_VOL_MIGRATION or FH4_VOL_RENAME is set, if FH4_VOLATILE_ANY is set and FH4_NOEXPIRE_WITH_OPEN is not set, or if a non-read-only file system has a transition target in a different handle class. In these cases, the server should deny a RENAME or REMOVE that would affect an OPEN file of any of the components leading to the OPEN file. In addition, the server should deny all RENAME or REMOVE requests during the grace period, in order to make sure that reclaims of files where filehandles may have expired do not do a reclaim for the wrong file. </t> <t> Volatile filehandles are especially suitable for implementation of the pseudo file systems used to bridge exports. See <xref target="pseudo_fs_volatility"/>format="default"/> for a discussion of this. </t> </section> </section> <sectiontitle="Onenumbered="true" toc="default"> <name>One Method of Constructing a VolatileFilehandle">Filehandle</name> <t> A volatile filehandle, while opaque to the client, could contain: </t><figure> <artwork><sourcecode type="pseudocode"><![CDATA[ [volatile bit = 1 | server boot time | slot | generation number]o slot]]></sourcecode> <ul> <li>slot is an index in the server volatile filehandletable o generationtable</li> <li>generation number is the generation number for the tableentry/ slot </artwork> </figure>entry/slot</li> </ul> <t> When the client presents a volatile filehandle, the server makes the following checks, which assume that the check for the volatile bit has passed. If the server boot time is less than the current server boot time, return NFS4ERR_FHEXPIRED. If slot is out of range, return NFS4ERR_BADHANDLE. If the generation number does not match, return NFS4ERR_FHEXPIRED. </t> <t> When the server restarts, the table is gone (it is volatile). </t> <t> If the volatile bit is 0, then it is a persistent filehandle with a different structure following it. </t> </section> <sectiontitle="Clientnumbered="true" toc="default"> <name>Client Recovery from FilehandleExpiration">Expiration</name> <t> If possible, the clientSHOULD<bcp14>SHOULD</bcp14> recover from the receipt of an NFS4ERR_FHEXPIRED error. The client must take on additional responsibility so that it may prepare itself to recover from the expiration of a volatile filehandle. If the server returns persistent filehandles, the client does not need these additional steps. </t> <t> For volatile filehandles, most commonly the client will need to store the component names leading up to and including the file system object in question. With these names, the client should be able to recover by finding a filehandle in the namespace that is still available or by starting at the root of the server's file system namespace. </t> <t> If the expired filehandle refers to an object that has been removed from the file system, obviously the client will not be able to recover from the expired filehandle. </t> <t> It is also possible that the expired filehandle refers to a file that has been renamed. If the file was renamed by another client, again it is possible that the original client will not be able to recover. However, in the case that the client itself is renaming the file and the file is open, it is possible that the client may be able to recover. The client can determine the new pathname based on the processing of the rename request. The client can then regenerate the new filehandle based on the new pathname. The client could also use the COMPOUND procedure to construct a series of operations like:<figure> <artwork></t> <sourcecode type="nfsv4compound"><![CDATA[ RENAME A B LOOKUP B GETFH</artwork> </figure>]]></sourcecode> <t> Note that the COMPOUND procedure does not provide atomicity. This example only reduces the overhead of recovering from an expired filehandle. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="file_attributes"title="File Attributes">numbered="true" toc="default"> <name>File Attributes</name> <t> To meet the requirements of extensibility and increased interoperability with non-UNIX platforms, attributes need to be handled in a flexible manner. The NFSv3 fattr3 structure contains a fixed list of attributes that not all clients and servers are able to support or care about. The fattr3 structure cannot be extended as new needs arise and it provides no way to indicate non-support. With the NFSv4.1 protocol, the client is able to query what attributes the server supports and construct requests with only those supported attributes (or a subset thereof). </t> <t> To this end, attributes are divided into three groups:REQUIRED, RECOMMENDED,<bcp14>REQUIRED</bcp14>, <bcp14>RECOMMENDED</bcp14>, and named. BothREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes are supported in the NFSv4.1 protocol by a specific and well-defined encoding and are identified by number. They are requested by setting a bit in the bit vector sent in the GETATTR request; the server response includes a bit vector to list what attributes were returned in the response. NewREQUIRED<bcp14>REQUIRED</bcp14> orRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes may be added to the NFSv4 protocol as part of a new minor version by publishing a Standards Track RFC that allocates a new attribute number value and defines the encoding for the attribute. See <xreftarget="minor_versioning"/>target="minor_versioning" format="default"/> for further discussion. </t> <t> Named attributes are accessed by the new OPENATTR operation, which accesses a hidden directory of attributes associated with a file system object. OPENATTR takes a filehandle for the object and returns the filehandle for the attribute hierarchy. The filehandle for the named attributes is a directory object accessible by LOOKUP or READDIR and contains files whose names represent the named attributes and whose data bytes are the value of the attribute. For example: </t><texttable> <ttcol align='left' /> <ttcol align='left' /> <ttcol align='left' /> <c>LOOKUP</c><c>"foo"</c><c>;<table align="center" anchor="table3"> <tbody> <tr> <td align="left">LOOKUP</td> <td align="left">"foo"</td> <td align="left">; look upfile</c> <c>GETATTR</c><c>attrbits</c><c /> <c>OPENATTR</c><c /><c>;file</td> </tr> <tr> <td align="left">GETATTR</td> <td align="left">attrbits</td> <td align="left"/> </tr> <tr> <td align="left">OPENATTR</td> <td align="left"/> <td align="left">; access foo's namedattributes</c> <c>LOOKUP</c><c>"x11icon"</c><c>;attributes</td> </tr> <tr> <td align="left">LOOKUP</td> <td align="left">"x11icon"</td> <td align="left">; look up specificattribute</c> <c>READ</c><c>0,4096</c><c>;attribute</td> </tr> <tr> <td align="left">READ</td> <td align="left">0,4096</td> <td align="left">; read stream ofbytes</c> </texttable>bytes</td> </tr> </tbody> </table> <t> Named attributes are intended for data needed by applications rather than by an NFS client implementation. NFS implementors are strongly encouraged to define their new attributes asRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes by bringing them to the IETF Standards Track process. </t> <t> The set of attributes that are classified asREQUIRED<bcp14>REQUIRED</bcp14> is deliberately small since servers need to do whatever it takes to support them. A server should support as many of theRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes as possible but, by their definition, the server is not required to support all of them. Attributes are deemedREQUIRED<bcp14>REQUIRED</bcp14> if the data is both needed by a large number of clients and is not otherwise reasonably computable by the client when support is not provided on the server. </t> <t> Note that the hidden directory returned by OPENATTR is a convenience for protocol processing. The client should not make any assumptions about the server's implementation of named attributes and whether or not the underlying file system at the server has a named attribute directory. Therefore, operations such as SETATTR and GETATTR on the named attribute directory are undefined. </t> <section anchor="mandatory_attributes_intro"title="REQUIRED Attributes">numbered="true" toc="default"> <name><bcp14>REQUIRED</bcp14> Attributes</name> <t> TheseMUST<bcp14>MUST</bcp14> be supported by every NFSv4.1 client and server in order to ensure a minimum level of interoperability. The serverMUST<bcp14>MUST</bcp14> store and return these attributes, and the clientMUST<bcp14>MUST</bcp14> be able to function with an attribute set limited to these attributes. With just theREQUIRED<bcp14>REQUIRED</bcp14> attributes some client functionality may be impaired or limited in some ways. A client may ask for any of these attributes to be returned by setting a bit in the GETATTR request, and the serverMUST<bcp14>MUST</bcp14> return their value. </t> </section> <section anchor="recommended_attributes_intro"title="RECOMMENDED Attributes">numbered="true" toc="default"> <name><bcp14>RECOMMENDED</bcp14> Attributes</name> <t> These attributes are understood well enough to warrant support in the NFSv4.1 protocol. However, they may not be supported on all clients and servers. A client may ask for any of these attributes to be returned by setting a bit in the GETATTR request but must handle the case where the server does not return them. A clientMAY<bcp14>MAY</bcp14> ask for the set of attributes the server supports andSHOULD NOT<bcp14>SHOULD NOT</bcp14> request attributes the server does not support. A server should be tolerant of requests for unsupported attributes and simply not return them rather than considering the request an error. It is expected that servers will support all attributes they comfortably can and only fail to support attributes that are difficult to support in their operating environments. A server should provide attributes whenever they don't have to "tell lies" to the client. For example, a file modification time should be either an accurate time or should not be supported by the server. At times this will be difficult for clients, but a client is better positioned to decide whether and how to fabricate or construct an attribute or whether to do without the attribute. </t> </section> <section anchor="named_attributes_intro"title="Named Attributes">numbered="true" toc="default"> <name>Named Attributes</name> <t> These attributes are not supported by direct encoding in the NFSv4 protocol but are accessed by string names rather than numbers and correspond to an uninterpreted stream of bytes that are stored with the file system object. The namespace for these attributes may be accessed by using the OPENATTR operation. The OPENATTR operation returns a filehandle for a virtual "named attribute directory", and further perusal and modification of the namespace may be done using operations that work on more typical directories. In particular, READDIR may be used to get a list of such named attributes, and LOOKUP and OPEN may select a particular attribute. Creation of a new named attribute may be the result of an OPEN specifying file creation. </t> <t> Once an OPEN is done, named attributes may be examined and changed by normal READ and WRITE operations using the filehandles and stateids returned by OPEN. </t> <t> Named attributes and the named attribute directory may have their own (non-named) attributes. Each of these objectsMUST<bcp14>MUST</bcp14> have all of theREQUIRED<bcp14>REQUIRED</bcp14> attributes and may have additionalRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes. However, the set of attributes for named attributes and the named attribute directory need not be, and typically will not be, as large as that for other objects in that file system. </t> <t> Named attributes and the named attribute directory might be the target of delegations (in the case of the named attribute directory, these will be directory delegations). However, since granting of delegations is at the server's discretion, a server need not support delegations on named attributes or the named attribute directory. </t> <t> It isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that servers support arbitrary named attributes. A client should not depend on the ability to store any named attributes in the server's file system. If a server does support named attributes, a client that is also able to handle them should be able to copy a file's data and metadata with complete transparency from one location to another; this would imply that names allowed for regular directory entries are valid for named attribute names as well. </t> <t> In NFSv4.1, the structure of named attribute directories is restricted in a number of ways, in order to prevent the development of non-interoperable implementations in which some servers support a fully general hierarchical directory structure for named attributes while others support a limited but adequate structure for named attributes. In such an environment, clients or applications might come to depend on non-portable extensions. The restrictions are:<list style="symbols"> <t></t> <ul spacing="normal"> <li> CREATE is not allowed in a named attribute directory. Thus, such objects as symbolic links and special files are not allowed to be named attributes. Further, directories may not be created in a named attribute directory, so no hierarchical structure of named attributes for a single object is allowed.</t> <t></li> <li> If OPENATTR is done on a named attribute directory or on a named attribute, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_WRONG_TYPE.</t> <t></li> <li> Doing a RENAME of a named attribute to a different named attribute directory or to an ordinary (i.e., non-named-attribute) directory is not allowed.</t> <t></li> <li> Creating hard links between named attribute directories or between named attribute directories and ordinary directories is not allowed.</t> </list> </t></li> </ul> <t> Names of attributes will not be controlled by this document or other IETF Standards Track documents. See <xreftarget="namedattributesiana"/>target="namedattributesiana" format="default"/> for further discussion. </t> </section> <sectiontitle="Classificationnumbered="true" toc="default"> <name>Classification ofAttributes">Attributes</name> <t> Each of theREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes can be classified in one of three categories: per server (i.e., the value of the attribute will be the same for all file objects that share the same server owner; see <xreftarget="Server_Owners"/>target="Server_Owners" format="default"/> for a definition of server owner), per file system (i.e., the value of the attribute will be the same for some or all file objects that share the same <xreftarget="attrdef_fsid">fsidtarget="attrdef_fsid" format="default">fsid attribute</xref> and server owner), or per file system object. Note that it is possible that some per file system attributes may vary within the file system, depending on the value of the <xreftarget="attrdef_homogeneous">"homogeneous"</xref>target="attrdef_homogeneous" format="default">"homogeneous"</xref> attribute. Note that the attributes time_access_set and time_modify_set are not listed in this section because they are write-only attributes corresponding to time_access and time_modify, and are used in a special instance of SETATTR.<list style='symbols'></t> <ul spacing="normal"> <li> <t> The per-server attribute is:<list style='empty'> <t> lease_time </t> </list></t> <ul empty="true" spacing="normal"> <li> lease_time </li> </ul> </li> <li> <t> The per-file system attributes are:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> supported_attrs, suppattr_exclcreat, fh_expire_type, link_support, symlink_support, unique_handles, aclsupport, cansettime, case_insensitive, case_preserving, chown_restricted, files_avail, files_free, files_total, fs_locations, homogeneous, maxfilesize, maxname, maxread, maxwrite, no_trunc, space_avail, space_free, space_total, time_delta, change_policy, fs_status, fs_layout_type, fs_locations_info, fs_charset_cap</t> </list> </t></li> </ul> </li> <li> <t> The per-file system object attributes are:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> type, change, size, named_attr, fsid, rdattr_error, filehandle, acl, archive, fileid, hidden, maxlink, mimetype, mode, numlinks, owner, owner_group, rawdev, space_used, system, time_access, time_backup, time_create, time_metadata, time_modify, mounted_on_fileid, dir_notif_delay, dirent_notif_delay, dacl, sacl, layout_type, layout_hint, layout_blksize, layout_alignment, mdsthreshold, retention_get, retention_set, retentevt_get, retentevt_set, retention_hold, mode_set_masked</t> </list> </t> </list> </t></li> </ul> </li> </ul> <t> For quota_avail_hard, quota_avail_soft, and quota_used, see their definitions below for the appropriate classification. </t> </section> <section anchor="rw_attr"title="Set-Onlynumbered="true" toc="default"> <name>Set-Only and Get-OnlyAttributes">Attributes</name> <t> SomeREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes are set-only; i.e., they can be set via SETATTR but not retrieved via GETATTR. Similarly, someREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes are get-only; i.e., they can be retrieved via GETATTR but not set via SETATTR. If a client attempts to set a get-only attribute or get a set-only attributes, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t> </section> <section anchor="mandatory_attributes"title="REQUIREDnumbered="true" toc="default"> <name><bcp14>REQUIRED</bcp14> Attributes - List and DefinitionReferences">References</name> <t> The list ofREQUIRED<bcp14>REQUIRED</bcp14> attributes appears in <xreftarget="req_attr_table"/>.target="req_attr_table" format="default"/>. The meaning of the columns of the table are:<list style='symbols'> <t>Name: The</t> <dl spacing="normal"> <dt>Name:</dt><dd>The name of theattribute.</t> <t>Id: Theattribute.</dd> <dt>Id:</dt><dd>The number assigned to the attribute. In the event of conflicts between the assigned number and <xreftarget="RFC5662"/>,target="RFC5662" format="default"/>, the latter is likely authoritative, but should be resolved with Errata to this document and/or <xreftarget="RFC5662"/>.target="RFC5662" format="default"/>. See <xreftarget="errata"/>target="errata" format="default"/> for the Errataprocess. </t> <t>Data Type: Theprocess.</dd> <dt>Data Type:</dt><dd>The XDR data type of theattribute.</t> <t> Acc: Accessattribute.</dd> <dt>Acc:</dt><dd>Access allowed to the attribute. R means read-only (GETATTR may retrieve, SETATTR may not set). W means write-only (SETATTR may set, GETATTR may not retrieve). R W means read/write (GETATTR may retrieve, SETATTR mayset). </t> <t>Defined in: Theset).</dd> <dt>Defined in:</dt><dd>The section of this specification that describes theattribute.</t> </list> </t> <texttable anchor="req_attr_table"> <ttcol align='left' >Name</ttcol> <ttcol align='left' >Id</ttcol> <ttcol align='left' >Data Type</ttcol> <ttcol align='left' >Acc</ttcol> <ttcol align='left' >Defined in:</ttcol> <c>supported_attrs</c><c>0</c><c>bitmap4</c><c>R</c> <c>attribute.</dd> </dl> <table anchor="req_attr_table" align="center"> <thead> <tr> <th align="left">Name</th> <th align="left">Id</th> <th align="left">Data Type</th> <th align="left">Acc</th> <th align="left">Defined in:</th> </tr> </thead> <tbody> <tr> <td align="left">supported_attrs</td> <td align="left">0</td> <td align="left">bitmap4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_supp_attr"/> </c> <c>type</c><c>1</c><c>nfs_ftype4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">type</td> <td align="left">1</td> <td align="left">nfs_ftype4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_type"/> </c> <c>fh_expire_type</c><c>2</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fh_expire_type</td> <td align="left">2</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fh_expire_type"/> </c> <c>change</c><c>3</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">change</td> <td align="left">3</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_change"/> </c> <c>size</c><c>4</c><c>uint64_t</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">size</td> <td align="left">4</td> <td align="left">uint64_t</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_size"/> </c> <c>link_support</c><c>5</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">link_support</td> <td align="left">5</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_link_support"/> </c> <c>symlink_support</c><c>6</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">symlink_support</td> <td align="left">6</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_symlink_support"/> </c> <c>named_attr</c><c>7</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">named_attr</td> <td align="left">7</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_named_attr"/> </c> <c>fsid</c><c>8</c><c>fsid4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fsid</td> <td align="left">8</td> <td align="left">fsid4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fsid"/> </c> <c>unique_handles</c><c>9</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">unique_handles</td> <td align="left">9</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_unique_handles"/> </c> <c>lease_time</c><c>10</c><c>nfs_lease4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">lease_time</td> <td align="left">10</td> <td align="left">nfs_lease4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_lease_time"/> </c> <c>rdattr_error</c><c>11</c><c>enum</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">rdattr_error</td> <td align="left">11</td> <td align="left">enum</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_rdattr_error"/> </c> <c>filehandle</c><c>19</c><c>nfs_fh4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">filehandle</td> <td align="left">19</td> <td align="left">nfs_fh4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_filehandle"/> </c> <c>suppattr_exclcreat</c><c>75</c><c>bitmap4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">suppattr_exclcreat</td> <td align="left">75</td> <td align="left">bitmap4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_suppattr_exclcreat"/> </c> </texttable>format="default"/> </td> </tr> </tbody> </table> </section> <section anchor="recommended_attributes"title="RECOMMENDEDnumbered="true" toc="default"> <name><bcp14>RECOMMENDED</bcp14> Attributes - List and DefinitionReferences">References</name> <t> TheRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes are defined in <xreftarget="rec_attr_tbl"/>.target="rec_attr_tbl" format="default"/>. The meanings of the column headers are the same as <xreftarget="req_attr_table"/>;target="req_attr_table" format="default"/>; see <xref target="mandatory_attributes"/>format="default"/> for the meanings. </t><texttable anchor="rec_attr_tbl"> <ttcol align='left' >Name</ttcol> <ttcol align='left' >Id</ttcol> <ttcol align='left' >Data Type</ttcol> <ttcol align='left' >Acc</ttcol> <ttcol align='left' >Defined in:</ttcol> <c>acl</c><c>12</c><c>nfsace4<></c><c>R W</c> <c><table anchor="rec_attr_tbl" align="center"> <thead> <tr> <th align="left">Name</th> <th align="left">Id</th> <th align="left">Data Type</th> <th align="left">Acc</th> <th align="left">Defined in:</th> </tr> </thead> <tbody> <tr> <td align="left">acl</td> <td align="left">12</td> <td align="left">nfsace4<></td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_acl"/> </c> <c>aclsupport</c><c>13</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">aclsupport</td> <td align="left">13</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_aclsupport"/> </c> <c>archive</c><c>14</c><c>bool</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">archive</td> <td align="left">14</td> <td align="left">bool</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_archive"/> </c> <c>cansettime</c><c>15</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">cansettime</td> <td align="left">15</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_cansettime"/> </c> <c>case_insensitive</c><c>16</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">case_insensitive</td> <td align="left">16</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_case_insensitive"/> </c> <c>case_preserving</c><c>17</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">case_preserving</td> <td align="left">17</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_case_preserving"/> </c> <c>change_policy</c><c>60</c><c>chg_policy4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">change_policy</td> <td align="left">60</td> <td align="left">chg_policy4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_change_policy"/> </c> <c>chown_restricted</c><c>18</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">chown_restricted</td> <td align="left">18</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_chown_restricted"/> </c> <c>dacl</c><c>58</c><c>nfsacl41</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">dacl</td> <td align="left">58</td> <td align="left">nfsacl41</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_dacl"/> </c> <c>dir_notif_delay</c><c>56</c><c>nfstime4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">dir_notif_delay</td> <td align="left">56</td> <td align="left">nfstime4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_dir_notif_delay"/> </c> <c>dirent_notif_delay</c><c>57</c><c>nfstime4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">dirent_notif_delay</td> <td align="left">57</td> <td align="left">nfstime4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_dirent_notif_delay"/> </c> <c>fileid</c><c>20</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fileid</td> <td align="left">20</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fileid"/> </c> <c>files_avail</c><c>21</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">files_avail</td> <td align="left">21</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_files_avail"/> </c> <c>files_free</c><c>22</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">files_free</td> <td align="left">22</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_files_free"/> </c> <c>files_total</c><c>23</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">files_total</td> <td align="left">23</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_files_total"/> </c> <c>fs_charset_cap</c><c>76</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fs_charset_cap</td> <td align="left">76</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fs_charset_cap"/> </c> <c>fs_layout_type</c><c>62</c><c>layouttype4<></c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fs_layout_type</td> <td align="left">62</td> <td align="left">layouttype4<></td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fs_layout_type"/> </c> <c>fs_locations</c><c>24</c><c>fs_locations</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fs_locations</td> <td align="left">24</td> <td align="left">fs_locations</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fs_locations"/> </c> <c>fs_locations_info</c><c>67</c><c>*</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fs_locations_info</td> <td align="left">67</td> <td align="left">fs_locations_info4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fs_locations_info"/> </c> <c>fs_status</c><c>61</c><c>fs4_status</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">fs_status</td> <td align="left">61</td> <td align="left">fs4_status</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_fs_status"/> </c> <c>hidden</c><c>25</c><c>bool</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">hidden</td> <td align="left">25</td> <td align="left">bool</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_hidden"/> </c> <c>homogeneous</c><c>26</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">homogeneous</td> <td align="left">26</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_homogeneous"/> </c> <c>layout_alignment</c><c>66</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">layout_alignment</td> <td align="left">66</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_layout_alignment"/> </c> <c>layout_blksize</c><c>65</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">layout_blksize</td> <td align="left">65</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_layout_blksize"/> </c> <c>layout_hint</c><c>63</c><c>layouthint4</c><c> W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">layout_hint</td> <td align="left">63</td> <td align="left">layouthint4</td> <td align="left"> W</td> <td align="left"> <xref target="attrdef_layout_hint"/> </c> <c>layout_type</c><c>64</c><c>layouttype4<></c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">layout_type</td> <td align="left">64</td> <td align="left">layouttype4<></td> <td align="left">R</td> <td align="left"> <xref target="attrdef_layout_type"/> </c> <c>maxfilesize</c><c>27</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">maxfilesize</td> <td align="left">27</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_maxfilesize"/> </c> <c>maxlink</c><c>28</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">maxlink</td> <td align="left">28</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_maxlink"/> </c> <c>maxname</c><c>29</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">maxname</td> <td align="left">29</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_maxname"/> </c> <c>maxread</c><c>30</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">maxread</td> <td align="left">30</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_maxread"/> </c> <c>maxwrite</c><c>31</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">maxwrite</td> <td align="left">31</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_maxwrite"/> </c> <c>mdsthreshold</c><c>68</c><c>mdsthreshold4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">mdsthreshold</td> <td align="left">68</td> <td align="left">mdsthreshold4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_mdsthreshold"/> </c> <c>mimetype</c><c>32</c><c>utf8str_cs</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">mimetype</td> <td align="left">32</td> <td align="left">utf8str_cs</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_mimetype"/> </c> <c>mode</c><c>33</c><c>mode4</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">mode</td> <td align="left">33</td> <td align="left">mode4</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_mode"/> </c> <c>mode_set_masked</c><c>74</c><c>mode_masked4</c><c> W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">mode_set_masked</td> <td align="left">74</td> <td align="left">mode_masked4</td> <td align="left"> W</td> <td align="left"> <xref target="attrdef_mode_set_masked"/> </c> <c>mounted_on_fileid</c><c>55</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">mounted_on_fileid</td> <td align="left">55</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_mounted_on_fileid"/> </c> <c>no_trunc</c><c>34</c><c>bool</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">no_trunc</td> <td align="left">34</td> <td align="left">bool</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_no_trunc"/> </c> <c>numlinks</c><c>35</c><c>uint32_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">numlinks</td> <td align="left">35</td> <td align="left">uint32_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_numlinks"/> </c> <c>owner</c> <c>36</c><c>utf8str_mixed</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">owner</td> <td align="left">36</td> <td align="left">utf8str_mixed</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_owner"/> </c> <c>owner_group</c> <c>37</c><c>utf8str_mixed</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">owner_group</td> <td align="left">37</td> <td align="left">utf8str_mixed</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_owner_group"/> </c> <c>quota_avail_hard</c> <c>38</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">quota_avail_hard</td> <td align="left">38</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_quota_avail_hard"/> </c> <c>quota_avail_soft</c> <c>39</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">quota_avail_soft</td> <td align="left">39</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_quota_avail_soft"/> </c> <c>quota_used</c> <c>40</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">quota_used</td> <td align="left">40</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_quota_used"/> </c> <c>rawdev</c><c>41</c><c>specdata4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">rawdev</td> <td align="left">41</td> <td align="left">specdata4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_rawdev"/> </c> <c>retentevt_get</c><c>71</c><c>retention_get4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">retentevt_get</td> <td align="left">71</td> <td align="left">retention_get4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_retentevt_get"/> </c> <c>retentevt_set</c><c>72</c><c>retention_set4</c><c> W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">retentevt_set</td> <td align="left">72</td> <td align="left">retention_set4</td> <td align="left"> W</td> <td align="left"> <xref target="attrdef_retentevt_set"/> </c> <c>retention_get</c><c>69</c><c>retention_get4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">retention_get</td> <td align="left">69</td> <td align="left">retention_get4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_retention_get"/> </c> <c>retention_hold</c><c>73</c><c>uint64_t</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">retention_hold</td> <td align="left">73</td> <td align="left">uint64_t</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_retention_hold"/> </c> <c>retention_set</c><c>70</c><c>retention_set4</c><c> W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">retention_set</td> <td align="left">70</td> <td align="left">retention_set4</td> <td align="left"> W</td> <td align="left"> <xref target="attrdef_retention_set"/> </c> <c>sacl</c><c>59</c><c>nfsacl41</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">sacl</td> <td align="left">59</td> <td align="left">nfsacl41</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_sacl"/> </c> <c>space_avail</c><c>42</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">space_avail</td> <td align="left">42</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_space_avail"/> </c> <c>space_free</c><c>43</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">space_free</td> <td align="left">43</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_space_free"/> </c> <c>space_total</c><c>44</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">space_total</td> <td align="left">44</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_space_total"/> </c> <c>space_used</c><c>45</c><c>uint64_t</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">space_used</td> <td align="left">45</td> <td align="left">uint64_t</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_space_used"/> </c> <c>system</c><c>46</c><c>bool</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">system</td> <td align="left">46</td> <td align="left">bool</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_system"/> </c> <c>time_access</c> <c>47</c><c>nfstime4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_access</td> <td align="left">47</td> <td align="left">nfstime4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_time_access"/> </c> <c>time_access_set</c><c>48</c><c>settime4</c><c> W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_access_set</td> <td align="left">48</td> <td align="left">settime4</td> <td align="left"> W</td> <td align="left"> <xref target="attrdef_time_access_set"/> </c> <c>time_backup</c><c>49</c><c>nfstime4</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_backup</td> <td align="left">49</td> <td align="left">nfstime4</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_time_backup"/> </c> <c>time_create</c><c>50</c><c>nfstime4</c><c>R W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_create</td> <td align="left">50</td> <td align="left">nfstime4</td> <td align="left">R W</td> <td align="left"> <xref target="attrdef_time_create"/> </c> <c>time_delta</c><c>51</c><c>nfstime4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_delta</td> <td align="left">51</td> <td align="left">nfstime4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_time_delta"/> </c> <c>time_metadata</c><c>52</c><c>nfstime4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_metadata</td> <td align="left">52</td> <td align="left">nfstime4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_time_metadata"/> </c> <c>time_modify</c><c>53</c><c>nfstime4</c><c>R</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_modify</td> <td align="left">53</td> <td align="left">nfstime4</td> <td align="left">R</td> <td align="left"> <xref target="attrdef_time_modify"/> </c> <c>time_modify_set</c><c>54</c><c>settime4</c><c> W</c> <c>format="default"/> </td> </tr> <tr> <td align="left">time_modify_set</td> <td align="left">54</td> <td align="left">settime4</td> <td align="left"> W</td> <td align="left"> <xref target="attrdef_time_modify_set"/> </c> </texttable> <t>* fs_locations_info4</t>format="default"/> </td> </tr> </tbody> </table> </section> <section anchor="attribute_definitions"title="Attribute Definitions">numbered="true" toc="default"> <name>Attribute Definitions</name> <section anchor="required_attr"title="Definitionsnumbered="true" toc="default"> <name>Definitions ofREQUIRED Attributes"><bcp14>REQUIRED</bcp14> Attributes</name> <section toc="exclude" anchor="attrdef_supp_attr"title="Attributenumbered="true"> <name>Attribute 0:supported_attrs">supported_attrs</name> <t> The bit vector that would retrieve allREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes that are supported for this object. The scope of this attribute applies to all objects with a matching fsid. </t> </section> <section toc="exclude" anchor="attrdef_type"title="Attributenumbered="true"> <name>Attribute 1:type">type</name> <t> Designates the type of an object in terms of one of a number of special constants:<list style="symbols"> <t></t> <ul spacing="normal"> <li> NF4REG designates a regular file.</t> <t></li> <li> NF4DIR designates a directory.</t> <t></li> <li> NF4BLK designates a block device special file.</t> <t></li> <li> NF4CHR designates a character device special file.</t> <t></li> <li> NF4LNK designates a symbolic link.</t> <t></li> <li> NF4SOCK designates a named socket special file.</t> <t></li> <li> NF4FIFO designates a fifo special file.</t> <t></li> <li> NF4ATTRDIR designates a named attribute directory.</t> <t></li> <li> NF4NAMEDATTR designates a named attribute.</t> </list> </t></li> </ul> <t> Within the explanatory text and operation descriptions, the following phrases will be used with the meanings given below:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The phrase "is a directory" means that the object's type attribute is NF4DIR or NF4ATTRDIR.</t> <t></li> <li> The phrase "is a special file" means that the object's type attribute is NF4BLK, NF4CHR, NF4SOCK, or NF4FIFO.</t> <t></li> <li> The phrases "is an ordinary file" and "is a regular file" mean that the object's type attribute is NF4REG or NF4NAMEDATTR.</t> </list> </t></li> </ul> </section> <section toc="exclude" anchor="attrdef_fh_expire_type"title="Attributenumbered="true"> <name>Attribute 2:fh_expire_type">fh_expire_type</name> <t> Server uses this to specify filehandle expiration behavior to the client. See <xreftarget="Filehandles"/>target="Filehandles" format="default"/> for additional description. </t> </section> <section toc="exclude" anchor="attrdef_change"title="Attributenumbered="true"> <name>Attribute 3:change">change</name> <t> A value created by the server that the client can use to determine if file data, directory contents, or attributes of the object have been modified. The server may return the object's time_metadata attribute for this attribute's value, but only if the file system object cannot be updated more frequently than the resolution of time_metadata. </t> </section> <section toc="exclude" anchor="attrdef_size"title="Attributenumbered="true"> <name>Attribute 4:size">size</name> <t> The size of the object in bytes. </t> </section> <section toc="exclude" anchor="attrdef_link_support"title="Attributenumbered="true"> <name>Attribute 5:link_support">link_support</name> <t> TRUE, if the object's file system supports hard links. </t> </section> <section toc="exclude" anchor="attrdef_symlink_support"title="Attributenumbered="true"> <name>Attribute 6:symlink_support">symlink_support</name> <t> TRUE, if the object's file system supports symbolic links. </t> </section> <section toc="exclude" anchor="attrdef_named_attr"title="Attributenumbered="true"> <name>Attribute 7:named_attr">named_attr</name> <t> TRUE, if this object has named attributes. In other words, object has a non-empty named attribute directory. </t> </section> <section toc="exclude" anchor="attrdef_fsid"title="Attributenumbered="true"> <name>Attribute 8:fsid">fsid</name> <t> Unique file system identifier for the file system holding this object. The fsid attribute has major and minor components, each of which are of data type uint64_t. </t> </section> <section toc="exclude" anchor="attrdef_unique_handles"title="Attributenumbered="true"> <name>Attribute 9:unique_handles">unique_handles</name> <t> TRUE, if two distinct filehandles are guaranteed to refer to two different file system objects. </t> </section> <section toc="exclude" anchor="attrdef_lease_time"title="Attributenumbered="true"> <name>Attribute 10:lease_time">lease_time</name> <t> Duration of the lease at server in seconds. </t> </section> <section toc="exclude" anchor="attrdef_rdattr_error"title="Attributenumbered="true"> <name>Attribute 11:rdattr_error">rdattr_error</name> <t> Error returned from an attempt to retrieve attributes during a READDIR operation. </t> </section> <section toc="exclude" anchor="attrdef_filehandle"title="Attributenumbered="true"> <name>Attribute 19:filehandle">filehandle</name> <t> The filehandle of this object (primarily for READDIR requests). </t> </section> <section toc="exclude" anchor="attrdef_suppattr_exclcreat"title="Attributenumbered="true"> <name>Attribute 75:suppattr_exclcreat">suppattr_exclcreat</name> <t> The bit vector that would set allREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes that are supported by the EXCLUSIVE4_1 method of file creation via the OPEN operation. The scope of this attribute applies to all objects with a matching fsid. </t> </section> </section> <section anchor="recommended_attr"title="Definitionsnumbered="true" toc="default"> <name>Definitions of UncategorizedRECOMMENDED Attributes"><bcp14>RECOMMENDED</bcp14> Attributes</name> <t> The definitions of most of theRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes follow. Collections that share a common category are defined in other sections. </t> <section toc="exclude" anchor="attrdef_archive"title="Attributenumbered="true"> <name>Attribute 14:archive">archive</name> <t> TRUE, if this file has been archived since the time of last modification (deprecated in favor of time_backup). </t> </section> <section toc="exclude" anchor="attrdef_cansettime"title="Attributenumbered="true"> <name>Attribute 15:cansettime">cansettime</name> <t> TRUE, if the server is able to change the times for a file system object as specified in a SETATTR operation. </t> </section> <section toc="exclude" anchor="attrdef_case_insensitive"title="Attributenumbered="true"> <name>Attribute 16:case_insensitive">case_insensitive</name> <t> TRUE, if file name comparisons on this file system are case insensitive. </t> </section> <section toc="exclude" anchor="attrdef_case_preserving"title="Attributenumbered="true"> <name>Attribute 17:case_preserving">case_preserving</name> <t> TRUE, if file name case on this file system is preserved. </t> </section> <section toc="exclude" anchor="attrdef_change_policy"title="Attributenumbered="true"> <name>Attribute 60:change_policy">change_policy</name> <t> A value created by the server that the client can use to determine if some server policy related to the current file system has been subject to change. If the value remains the same, then the client can be sure that the values of the attributes related to fs location and the fss_type field of the fs_status attribute have not changed. On the other hand, a change in this value does necessarily imply a change in policy. It is up to the client to interrogate the server to determine if some policy relevant to it has changed. See <xref target="chg_policy4"/>format="default"/> for details. </t> <t> This attributeMUST<bcp14>MUST</bcp14> change when the value returned by the fs_locations or fs_locations_info attribute changes, when a file system goes from read-only to writable or vice versa, or when the allowable set of security flavors for the file system or any part thereof is changed. </t> </section> <section toc="exclude" anchor="attrdef_chown_restricted"title="Attributenumbered="true"> <name>Attribute 18:chown_restricted">chown_restricted</name> <t> If TRUE, the server will reject any request to change either the owner or the group associated with a file if the caller is not a privileged user (for example, "root" in UNIX operating environments or, in Windows 2000, the "Take Ownership" privilege). </t> </section> <section toc="exclude" anchor="attrdef_fileid"title="Attributenumbered="true"> <name>Attribute 20:fileid">fileid</name> <t> A number uniquely identifying the file within the file system. </t> </section> <section toc="exclude" anchor="attrdef_files_avail"title="Attributenumbered="true"> <name>Attribute 21:files_avail">files_avail</name> <t> File slots available to this user on the file system containing this object -- this should be the smallest relevant limit. </t> </section> <section toc="exclude" anchor="attrdef_files_free"title="Attributenumbered="true"> <name>Attribute 22:files_free">files_free</name> <t> Free file slots on the file system containing this object -- this should be the smallest relevant limit. </t> </section> <section toc="exclude" anchor="attrdef_files_total"title="Attributenumbered="true"> <name>Attribute 23:files_total">files_total</name> <t> Total file slots on the file system containing this object. </t> </section> <section toc="exclude" anchor="attrdef_fs_charset_cap"title="Attributenumbered="true"> <name>Attribute 76:fs_charset_cap">fs_charset_cap</name> <t> Character set capabilities for this file system. See <xreftarget="utf8_caps"/>.target="utf8_caps" format="default"/>. </t> </section> <section toc="exclude" anchor="attrdef_fs_locations"title="Attributenumbered="true"> <name>Attribute 24:fs_locations">fs_locations</name> <t> Locations where this file system may be found. If the server returns NFS4ERR_MOVED as an error, this attributeMUST<bcp14>MUST</bcp14> be supported. See <xreftarget="fs_locations"/>target="fs_locations" format="default"/> for more details. </t> </section> <section toc="exclude" anchor="attrdef_fs_locations_info"title="Attributenumbered="true"> <name>Attribute 67:fs_locations_info">fs_locations_info</name> <t> Full function file system location. See <xreftarget="SEC11-fsli-info"/>target="SEC11-fsli-info" format="default"/> for more details. </t> </section> <section toc="exclude" anchor="attrdef_fs_status"title="Attributenumbered="true"> <name>Attribute 61:fs_status">fs_status</name> <t> Generic file system type information. See <xreftarget="fs_status"/>target="fs_status" format="default"/> for more details. </t> </section> <section toc="exclude" anchor="attrdef_hidden"title="Attributenumbered="true"> <name>Attribute 25:hidden">hidden</name> <t> TRUE, if the file is considered hidden with respect to the Windows API. </t> </section> <section toc="exclude" anchor="attrdef_homogeneous"title="Attributenumbered="true"> <name>Attribute 26:homogeneous">homogeneous</name> <t> TRUE, if this object's file system is homogeneous; i.e., all objects in the file system (all objects on the server with the same fsid) have common values for all per-file-system attributes. </t> </section> <section toc="exclude" anchor="attrdef_maxfilesize"title="Attributenumbered="true"> <name>Attribute 27:maxfilesize">maxfilesize</name> <t> Maximum supported file size for the file system of this object. </t> </section> <section toc="exclude" anchor="attrdef_maxlink"title="Attributenumbered="true"> <name>Attribute 28:maxlink">maxlink</name> <t> Maximum number of links for this object. </t> </section> <section toc="exclude" anchor="attrdef_maxname"title="Attributenumbered="true"> <name>Attribute 29:maxname">maxname</name> <t> Maximum file name size supported for this object. </t> </section> <section toc="exclude" anchor="attrdef_maxread"title="Attributenumbered="true"> <name>Attribute 30:maxread">maxread</name> <t> Maximum amount of data the READ operation will return for this object. </t> </section> <section toc="exclude" anchor="attrdef_maxwrite"title="Attributenumbered="true"> <name>Attribute 31:maxwrite">maxwrite</name> <t> Maximum amount of data the WRITE operation will accept for this object. This attributeSHOULD<bcp14>SHOULD</bcp14> be supported if the file is writable. Lack of this attribute can lead to the client either wasting bandwidth or not receiving the best performance. </t> </section> <section toc="exclude" anchor="attrdef_mimetype"title="Attributenumbered="true"> <name>Attribute 32:mimetype">mimetype</name> <t> MIME body type/subtype of this object. </t> </section> <section toc="exclude" anchor="attrdef_mounted_on_fileid"title="Attributenumbered="true"> <name>Attribute 55:mounted_on_fileid">mounted_on_fileid</name> <t> Like fileid, but if the target filehandle is the root of a file system, this attribute represents the fileid of the underlying directory. </t> <t> UNIX-based operating environments connect a file system into the namespace by connecting (mounting) the file system onto the existing file object (the mount point, usually a directory) of an existing file system. When the mount point's parent directory is read via an API like readdir(), the return results are directory entries, each with a component name and a fileid. The fileid of the mount point's directory entry will be different from the fileid that the stat() system call returns. The stat() system call is returning the fileid of the root of the mounted file system, whereas readdir() is returning the fileid that stat() would have returned before any file systems were mounted on the mount point. </t> <t> Unlike NFSv3, NFSv4.1 allows a client's LOOKUP request to cross other file systems. The client detects the file system crossing whenever the filehandle argument of LOOKUP has an fsid attribute different from that of the filehandle returned by LOOKUP. A UNIX-based client will consider this a "mount point crossing". UNIX has a legacy scheme for allowing a process to determine its current working directory. This relies on readdir() of a mount point's parent and stat() of the mount point returning fileids as previously described. The mounted_on_fileid attribute corresponds to the fileid that readdir() would have returned as described previously. </t> <t> While the NFSv4.1 client could simply fabricate a fileid corresponding to what mounted_on_fileid provides (and if the server does not support mounted_on_fileid, the client has no choice), there is a risk that the client will generate a fileid that conflicts with one that is already assigned to another object in the file system. Instead, if the server can provide the mounted_on_fileid, the potential for client operational problems in this area is eliminated. </t> <t> If the server detects that there is no mounted point at the target file object, then the value for mounted_on_fileid that it returns is the same as that of the fileid attribute. </t> <t> The mounted_on_fileid attribute isRECOMMENDED,<bcp14>RECOMMENDED</bcp14>, so the serverSHOULD<bcp14>SHOULD</bcp14> provide it if possible, and for a UNIX-based server, this is straightforward. Usually, mounted_on_fileid will be requested during a READDIR operation, in which case it is trivial (at least for UNIX-based servers) to return mounted_on_fileid since it is equal to the fileid of a directory entry returned by readdir(). If mounted_on_fileid is requested in a GETATTR operation, the server should obey an invariant that has it returning a value that is equal to the file object's entry in the object's parent directory, i.e., what readdir() would have returned. Some operating environments allow a series of two or more file systems to be mounted onto a single mount point. In this case, for the server to obey the aforementioned invariant, it will need to find the base mount point, and not the intermediate mount points. </t> </section> <section toc="exclude" anchor="attrdef_no_trunc"title="Attributenumbered="true"> <name>Attribute 34:no_trunc">no_trunc</name> <t> If this attribute is TRUE, then if the client uses a file name longer than name_max, an error will be returned instead of the name being truncated. </t> </section> <section toc="exclude" anchor="attrdef_numlinks"title="Attributenumbered="true"> <name>Attribute 35:numlinks">numlinks</name> <t> Number of hard links to this object. </t> </section> <section toc="exclude" anchor="attrdef_owner"title="Attributenumbered="true"> <name>Attribute 36:owner">owner</name> <t> The string name of the owner of this object. </t> </section> <section toc="exclude" anchor="attrdef_owner_group"title="Attributenumbered="true"> <name>Attribute 37:owner_group">owner_group</name> <t> The string name of the group ownership of this object. </t> </section> <section toc="exclude" anchor="attrdef_quota_avail_hard"title="Attributenumbered="true"> <name>Attribute 38:quota_avail_hard">quota_avail_hard</name> <t anchor="quota_avail_hard"> The value in bytes that represents the amount of additional disk space beyond the current allocation that can be allocated to this file or directory before further allocations will be refused. It is understood that this space may be consumed by allocations to other files or directories. </t> </section> <section toc="exclude" anchor="attrdef_quota_avail_soft"title="Attributenumbered="true"> <name>Attribute 39:quota_avail_soft">quota_avail_soft</name> <t anchor="quota_avail_soft"> The value in bytes that represents the amount of additional disk space that can be allocated to this file or directory before the user may reasonably be warned. It is understood that this space may be consumed by allocations to other files or directories though there is a rule as to which other files or directories. </t> </section> <section toc="exclude" anchor="attrdef_quota_used"title="Attributenumbered="true"> <name>Attribute 40:quota_used">quota_used</name> <t anchor="quota_used"> The value in bytes that represents the amount of disk space used by this file or directory and possibly a number of other similar files or directories, where the set of "similar" meets at least the criterion that allocating space to any file or directory in the set will reduce the "quota_avail_hard" of every other file or directory in the set.<vspace blankLines='1' /></t> <t> Note that there may be a number of distinct but overlapping sets of files or directories for which a quota_used value is maintained, e.g., "all files with a given owner", "all files with a given group owner", etc. The server is at liberty to choose any of those sets when providing the content of the quota_used attribute, but should do so in a repeatable way. The rule may be configured per file system or may be "choose the set with the smallest quota". </t> </section> <section toc="exclude" anchor="attrdef_rawdev"title="Attributenumbered="true"> <name>Attribute 41:rawdev">rawdev</name> <t> Raw device number of file of type NF4BLK or NF4CHR. The device number is split into major and minor numbers. If the file's type attribute is not NF4BLK or NF4CHR, the value returnedSHOULD NOT<bcp14>SHOULD NOT</bcp14> be considered useful. </t> </section> <section toc="exclude" anchor="attrdef_space_avail"title="Attributenumbered="true"> <name>Attribute 42:space_avail">space_avail</name> <t> Disk space in bytes available to this user on the file system containing this object -- this should be the smallest relevant limit. </t> </section> <section toc="exclude" anchor="attrdef_space_free"title="Attributenumbered="true"> <name>Attribute 43:space_free">space_free</name> <t> Free disk space in bytes on the file system containing this object -- this should be the smallest relevant limit. </t> </section> <section toc="exclude" anchor="attrdef_space_total"title="Attributenumbered="true"> <name>Attribute 44:space_total">space_total</name> <t> Total disk space in bytes on the file system containing this object. </t> </section> <section toc="exclude" anchor="attrdef_space_used"title="Attributenumbered="true"> <name>Attribute 45:space_used">space_used</name> <t> Number of file system bytes allocated to this object. </t> </section> <section toc="exclude" anchor="attrdef_system"title="Attributenumbered="true"> <name>Attribute 46:system">system</name> <t> This attribute is TRUE if this file is a "system" file with respect to the Windows operating environment. </t> </section> <section toc="exclude" anchor="attrdef_time_access"title="Attributenumbered="true"> <name>Attribute 47:time_access">time_access</name> <t> The time_access attribute represents the time of last access to the object by a READ operation sent to the server. The notion of what is an "access" depends on the server's operating environment and/or the server's file system semantics. For example, for servers obeying Portable Operating System Interface (POSIX) semantics, time_access would be updated only by the READ and READDIR operations and not any of the operations that modify the content of the object <xreftarget="read_atime"/>,target="read_atime" format="default"/>, <xreftarget="readdir_atime"/>,target="readdir_atime" format="default"/>, <xreftarget="write_atime"/>.target="write_atime" format="default"/>. Of course, setting the corresponding time_access_set attribute is another way to modify the time_access attribute. </t> <t> Whenever the file object resides on a writable file system, the server should make its best efforts to record time_access into stable storage. However, to mitigate the performance effects of doing so, and most especially whenever the server is satisfying the read of the object's content from its cache, the serverMAY<bcp14>MAY</bcp14> cache access time updates and lazily write them to stable storage. It is also acceptable to give administrators of the server the option to disable time_access updates. </t> </section> <section toc="exclude" anchor="attrdef_time_access_set"title="Attributenumbered="true"> <name>Attribute 48:time_access_set">time_access_set</name> <t> Sets the time of last access to the object. SETATTR use only. </t> </section> <section toc="exclude" anchor="attrdef_time_backup"title="Attributenumbered="true"> <name>Attribute 49:time_backup">time_backup</name> <t> The time of last backup of the object. </t> </section> <section toc="exclude" anchor="attrdef_time_create"title="Attributenumbered="true"> <name>Attribute 50:time_create">time_create</name> <t> The time of creation of the object. This attribute does not have any relation to the traditional UNIX file attribute "ctime" or "change time". </t> </section> <section toc="exclude" anchor="attrdef_time_delta"title="Attributenumbered="true"> <name>Attribute 51:time_delta">time_delta</name> <t> Smallest useful server time granularity. </t> </section> <section toc="exclude" anchor="attrdef_time_metadata"title="Attributenumbered="true"> <name>Attribute 52:time_metadata">time_metadata</name> <t> The time of last metadata modification of the object. </t> </section> <section toc="exclude" anchor="attrdef_time_modify"title="Attributenumbered="true"> <name>Attribute 53:time_modify">time_modify</name> <t> The time of last modification to the object. </t> </section> <section toc="exclude" anchor="attrdef_time_modify_set"title="Attributenumbered="true"> <name>Attribute 54:time_modify_set">time_modify_set</name> <t> Sets the time of last modification to the object. SETATTR use only. </t> </section> </section> </section> <section anchor="owner_owner_group"title="Interpretingnumbered="true" toc="default"> <name>Interpreting owner andowner_group">owner_group</name> <t> TheRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes "owner" and "owner_group" (and also users and groups within the "acl" attribute) are represented in terms of a UTF-8 string. To avoid a representation that is tied to a particular underlying implementation at the client or server, the use of the UTF-8 string has been chosen. Note that Section6.1<xref target="RFC2624" sectionFormat="bare" section="6.1"/> of RFC 2624 <xreftarget="RFC2624">RFC 2624</xref>target="RFC2624" format="default"/> provides additional rationale. It is expected that the client and server will have their own local representation of owner and owner_group that is used for local storage or presentation to the end user. Therefore, it is expected that when these attributes are transferred between the client and server, the local representation is translated to a syntax of the form "user@dns_domain". This will allow for a client and server that do not use the same local representation the ability to translate to a common syntax that can be interpreted by both. </t> <t> Similarly, security principals may be represented in different ways by different security mechanisms. Servers normally translate these representations into a common format, generally that used by local storage, to serve as a means of identifying the users corresponding to these security principals. When these local identifiers are translated to the form of the owner attribute, associated with files created by such principals, they identify, in a common format, the users associated with each corresponding set of security principals. </t> <t> The translation used to interpret owner and group strings is not specified as part of the protocol. This allows various solutions to be employed. For example, a local translation table may be consulted that maps a numeric identifier to the user@dns_domain syntax. A name service may also be used to accomplish the translation. A server may provide a more general service, not limited by any particular translation (which would only translate a limited set of possible strings) by storing the owner and owner_group attributes in local storage without any translation or it may augment a translation method by storing the entire string for attributes for which no translation is available while using the local representation for those cases in which a translation is available. </t> <t> Servers that do not provide support for all possible values of the owner and owner_group attributesSHOULD<bcp14>SHOULD</bcp14> return an error (NFS4ERR_BADOWNER) when a string is presented that has no translation, as the value to be set for a SETATTR of the owner, owner_group, or acl attributes. When a server does accept an owner or owner_group value as valid on a SETATTR (and similarly for the owner and group strings in an acl), it is promising to return that same string when a corresponding GETATTR is done. Configuration changes (including changes from the mapping of the string to the local representation) and ill-constructed name translations (those that contain aliasing) may make that promise impossible to honor. Servers should make appropriate efforts to avoid a situation in which these attributes have their values changed when no real change to ownership has occurred. </t> <t> The "dns_domain" portion of the owner string is meant to be a DNS domain name, for example, user@example.org. Servers should accept as valid a set of users for at least one domain. A server may treat other domains as having no valid translations. A more general service is provided when a server is capable of accepting users for multiple domains, or for all domains, subject to security constraints. </t> <t> In the case where there is no translation available to the client or server, the attribute value will be constructed without the "@". Therefore, the absence of the @ from the owner or owner_group attribute signifies that no translation was available at the sender and that the receiver of the attribute should not use that string as a basis for translation into its own internal format. Even though the attribute value cannot be translated, it may still be useful. In the case of a client, the attribute string may be used for local display of ownership. </t> <t> To provide a greater degree of compatibility with NFSv3, which identified users and groups by 32-bit unsigned user identifiers and group identifiers, owner and group strings that consist of decimal numeric values with no leading zeros can be given a special interpretation by clients and servers that choose to provide such support. The receiver may treat such a user or group string as representing the same user as would be represented by an NFSv3 uid or gid having the corresponding numeric value. A server is not obligated to accept such a string, but may return an NFS4ERR_BADOWNER instead. To avoid this mechanism being used to subvert user and group translation, so that a client might pass all of the owners and groups in numeric form, a serverSHOULD<bcp14>SHOULD</bcp14> return an NFS4ERR_BADOWNER error when there is a valid translation for the user or owner designated in this way. In that case, the client must use the appropriate name@domain string and not the special form for compatibility. </t> <t> The owner string "nobody" may be used to designate an anonymous user, which will be associated with a file created by a security principal that cannot be mapped through normal means to the owner attribute. Users and implementations of NFSv4.1SHOULD NOT<bcp14>SHOULD NOT</bcp14> use "nobody" to designate a real user whose access is not anonymous. </t> </section> <section anchor="character_case_attributes"title="Characternumbered="true" toc="default"> <name>Character CaseAttributes">Attributes</name> <t> With respect to the case_insensitive and case_preserving attributes, each UCS-4 character (which UTF-8 encodes) can be mapped according to AppendixB.2<xref target="RFC3454" sectionFormat="bare" section="B.2"/> of RFC 3454 <xreftarget="RFC3454">RFC 3454</xref>.target="RFC3454" format="default"/>. For general character handling and internationalization issues, see <xreftarget="internationalization"/>.target="internationalization" format="default"/>. </t> </section> <sectiontitle="Directoryanchor="dir_not_attrs" numbered="true" toc="default"> <name>Directory NotificationAttributes" anchor="dir_not_attrs">Attributes</name> <t> As described in <xref target="OP_GET_DIR_DELEGATION"/>,format="default"/>, the client can request a minimum delay for notifications of changes to attributes, but the server is free to ignore what the client requests. The client can determine in advance what notification delays the server will accept by sending a GETATTR operation for either or both of two directory notification attributes. When the client calls the GET_DIR_DELEGATION operation and asks for attribute change notifications, it should request notification delays that are no less than the values in the server-provided attributes. </t> <section toc="exclude" anchor="attrdef_dir_notif_delay"title="Attributenumbered="true"> <name>Attribute 56:dir_notif_delay">dir_notif_delay</name> <t> The dir_notif_delay attribute is the minimum number of seconds the server will delay before notifying the client of a change to the directory's attributes. </t> </section> <section toc="exclude" anchor="attrdef_dirent_notif_delay"title="Attributenumbered="true"> <name>Attribute 57:dirent_notif_delay">dirent_notif_delay</name> <t> The dirent_notif_delay attribute is the minimum number of seconds the server will delay before notifying the client of a change to a file object that has an entry in the directory. </t> </section> </section> <section anchor="pnfs_attr_full"title="pNFSnumbered="true" toc="default"> <name>pNFS AttributeDefinitions">Definitions</name> <section toc="exclude" anchor="attrdef_fs_layout_type"title="Attributenumbered="true"> <name>Attribute 62:fs_layout_type">fs_layout_type</name> <t> The fs_layout_type attribute (see <xreftarget="layouttype4"/>)target="layouttype4" format="default"/>) applies to a file system and indicates what layout types are supported by the file system. When the client encounters a new fsid, the clientSHOULD<bcp14>SHOULD</bcp14> obtain the value for the fs_layout_type attribute associated with the new file system. This attribute is used by the client to determine if the layout types supported by the server match any of the client's supported layout types. </t> </section> <section toc="exclude" anchor="attrdef_layout_alignment"title="Attributenumbered="true"> <name>Attribute 66:layout_alignment">layout_alignment</name> <t> When a client holds layouts on files of a file system, the layout_alignment attribute indicates the preferred alignment for I/O to files on that file system. Where possible, the client should send READ and WRITE operations with offsets that are whole multiples of the layout_alignment attribute. </t> </section> <section toc="exclude" anchor="attrdef_layout_blksize"title="Attributenumbered="true"> <name>Attribute 65:layout_blksize">layout_blksize</name> <t> When a client holds layouts on files of a file system, the layout_blksize attribute indicates the preferred block size for I/O to files on that file system. Where possible, the client should send READ operations with a count argument that is a whole multiple of layout_blksize, and WRITE operations with a data argument of size that is a whole multiple of layout_blksize. </t> </section> <section toc="exclude" anchor="attrdef_layout_hint"title="Attributenumbered="true"> <name>Attribute 63:layout_hint">layout_hint</name> <t> The layout_hint attribute (see <xreftarget="layouthint4"/>)target="layouthint4" format="default"/>) may be set on newly created files to influence the metadata server's choice for the file's layout. If possible, this attribute is one of those set in the initial attributes within the OPEN operation. The metadata server may choose to ignore this attribute. The layout_hint attribute is a subset of the layout structure returned by LAYOUTGET. For example, instead of specifying particular devices, this would be used to suggest the stripe width of a file. The server implementation determines which fields within the layout will be used. </t> </section> <section toc="exclude" anchor="attrdef_layout_type"title="Attributenumbered="true"> <name>Attribute 64:layout_type">layout_type</name> <t> This attribute lists the layout type(s) available for a file. The value returned by the server is for informational purposes only. The client will use the LAYOUTGET operation to obtain the information needed in order to perform I/O, for example, the specific device information for the file and its layout. </t> </section> <section toc="exclude" anchor="attrdef_mdsthreshold"title="Attributenumbered="true"> <name>Attribute 68:mdsthreshold">mdsthreshold</name> <t> This attribute is a server-provided hint used to communicate to the client when it is more efficient to send READ and WRITE operations to the metadata server or the data server. The two types of thresholds described are file size thresholds and I/O size thresholds. If a file's size is smaller than the file size threshold, data accessesSHOULD<bcp14>SHOULD</bcp14> be sent to the metadata server. If an I/O request has a length that is below the I/O size threshold, the I/OSHOULD<bcp14>SHOULD</bcp14> be sent to the metadata server. Each threshold type is specified separately for read and write. </t> <t> The serverMAY<bcp14>MAY</bcp14> provide both types of thresholds for a file. If both file size and I/O size are provided, the clientSHOULD<bcp14>SHOULD</bcp14> reach or exceed both thresholds before sending its read or write requests to the data server. Alternatively, if only one of the specified thresholds is reached or exceeded, the I/O requests are sent to the metadata server. </t> <t> For each threshold type, a value of zero indicates no READ or WRITE should be sent to the metadata server, while a value of all ones indicates that all READs or WRITEs should be sent to the metadata server. </t> <t> The attribute is available on a per-filehandle basis. If the current filehandle refers to a non-pNFS file or directory, the metadata server should return an attribute that is representative of the filehandle's file system. It is suggested that this attribute is queried as part of the OPEN operation. Due to dynamic system changes, the client should not assume that the attribute will remain constant for any specific time period; thus, it should be periodically refreshed. </t> </section> </section><!-- "PNFS Attributes" --><section anchor="retention"title="Retention Attributes">numbered="true" toc="default"> <name>Retention Attributes</name> <t> Retention is a concept whereby a file object can be placed in an immutable, undeletable, unrenamable state for a fixed or infinite duration of time. Once in this "retained" state, the file cannot be moved out of the state until the duration of retention has been reached. </t> <t> When retention is enabled, retentionMUST<bcp14>MUST</bcp14> extend to the data of the file, and the name of file. The serverMAY<bcp14>MAY</bcp14> extend retention to any other property of the file, including any subset ofREQUIRED, RECOMMENDED,<bcp14>REQUIRED</bcp14>, <bcp14>RECOMMENDED</bcp14>, and named attributes, with the exceptions noted in this section. </t> <t> ServersMAY<bcp14>MAY</bcp14> support or not support retention on any file object type. </t> <t> The five retention attributes are explained in the next subsections. </t> <section toc="exclude" anchor="attrdef_retention_get"title="Attributenumbered="true"> <name>Attribute 69:retention_get">retention_get</name> <t> If retention is enabled for the associated file, this attribute's value represents the retention begin time of the file object. This attribute's value is only readable with the GETATTR operation andMUST NOT<bcp14>MUST NOT</bcp14> be modified by the SETATTR operation (<xreftarget="rw_attr"/>).target="rw_attr" format="default"/>). The value of the attribute consists of:<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ const RET4_DURATION_INFINITE = 0xffffffffffffffff; struct retention_get4 { uint64_t rg_duration; nfstime4rg_begin_time<1>;rg_begin_time<1>; };</artwork> </figure>]]></sourcecode> <t> The field rg_duration is the duration in seconds indicating how long the file will be retained once retention is enabled. The field rg_begin_time is an array of up to one absolute time value. If the array is zero length, no beginning retention time has been established, and retention is not enabled. If rg_duration is equal to RET4_DURATION_INFINITE, the file, once retention is enabled, will be retained for an infinite duration. </t> <t> If (as soon as) rg_duration is zero, then rg_begin_time will be of zero length, and again, retention is not (no longer) enabled. </t> </section> <section toc="exclude" anchor="attrdef_retention_set"title="Attributenumbered="true"> <name>Attribute 70:retention_set">retention_set</name> <t> This attribute is used to set the retention duration and optionally enable retention for the associated file object. This attribute is only modifiable via the SETATTR operation andMUST NOT<bcp14>MUST NOT</bcp14> be retrieved by the GETATTR operation (<xreftarget="rw_attr"/>).target="rw_attr" format="default"/>). This attribute corresponds to retention_get. The value of the attribute consists of:<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ struct retention_set4 { bool rs_enable; uint64_trs_duration<1>;rs_duration<1>; };</artwork> </figure>]]></sourcecode> <t> If the client sets rs_enable to TRUE, then it is enabling retention on the file object with the begin time of retention starting from the server's current time and date. The duration of the retention can also be provided if the rs_duration array is of length one. The duration is the time in seconds from the begin time of retention, and if set to RET4_DURATION_INFINITE, the file is to be retained forever. If retention is enabled, with no duration specified in either this SETATTR or a previous SETATTR, the duration defaults to zero seconds. The serverMAY<bcp14>MAY</bcp14> restrict the enabling of retention or the duration of retention on the basis of the ACE4_WRITE_RETENTION ACL permission. The enabling of retentionMUST NOT<bcp14>MUST NOT</bcp14> prevent the enabling of event-based retention or the modification of the retention_hold attribute. </t> <t> The following rules apply to both the retention_set and retentevt_set attributes.<list style='symbols'> <t></t> <ul spacing="normal"> <li> As long as retention is not enabled, the client is permitted to decrease the duration.</t> <t></li> <li> The duration can always be set to an equal or higher value, even if retention is enabled. Note that once retention is enabled, the actual duration (as returned by the retention_get or retentevt_get attributes; see <xreftarget="attrdef_retention_get"/>target="attrdef_retention_get" format="default"/> or <xreftarget="attrdef_retentevt_get"/>)target="attrdef_retentevt_get" format="default"/>) is constantly counting down to zero (one unit per second), unless the duration was set to RET4_DURATION_INFINITE. Thus, it will not be possible for the client to precisely extend the duration on a file that has retention enabled.</t> <t></li> <li> While retention is enabled, attempts to disable retention or decrease the retention's durationMUST<bcp14>MUST</bcp14> fail with the error NFS4ERR_INVAL.</t> <t></li> <li> If the principal attempting to change retention_set or retentevt_set does not have ACE4_WRITE_RETENTION permissions, the attemptMUST<bcp14>MUST</bcp14> fail with NFS4ERR_ACCESS.</t> </list> </t></li> </ul> </section> <section toc="exclude" anchor="attrdef_retentevt_get"title="Attributenumbered="true"> <name>Attribute 71:retentevt_get">retentevt_get</name> <t> Gets the event-based retention duration, and if enabled, the event-based retention begin time of the file object. This attribute is like retention_get, but refers to event-based retention. The event that triggers event-based retention is not defined by the NFSv4.1 specification. </t> </section> <section toc="exclude" anchor="attrdef_retentevt_set"title="Attributenumbered="true"> <name>Attribute 72:retentevt_set">retentevt_set</name> <t> Sets the event-based retention duration, and optionally enables event-based retention on the file object. This attribute corresponds to retentevt_get and is like retention_set, but refers to event-based retention. When event-based retention is set, the fileMUST<bcp14>MUST</bcp14> be retained even if non-event-based retention has been set, and the duration of non-event-based retention has been reached. Conversely, when non-event-based retention has been set, the fileMUST<bcp14>MUST</bcp14> be retained even if event-based retention has been set, and the duration of event-based retention has been reached. The serverMAY<bcp14>MAY</bcp14> restrict the enabling of event-based retention or the duration of event-based retention on the basis of the ACE4_WRITE_RETENTION ACL permission. The enabling of event-based retentionMUST NOT<bcp14>MUST NOT</bcp14> prevent the enabling of non-event-based retention or the modification of the retention_hold attribute. </t> </section> <section toc="exclude" anchor="attrdef_retention_hold"title="Attributenumbered="true"> <name>Attribute 73:retention_hold">retention_hold</name> <t> Gets or sets administrative retention holds, one hold per bit position. </t> <t> This attribute allows one to 64 administrative holds, one hold per bit on the attribute. If retention_hold is not zero, then the fileMUST NOT<bcp14>MUST NOT</bcp14> be deleted, renamed, or modified, even if the duration on enabled event or non-event-based retention has been reached. The serverMAY<bcp14>MAY</bcp14> restrict the modification of retention_hold on the basis of the ACE4_WRITE_RETENTION_HOLD ACL permission. The enabling of administration retention holds does not prevent the enabling of event-based or non-event-based retention. </t> <t> If the principal attempting to change retention_hold does not have ACE4_WRITE_RETENTION_HOLD permissions, the attemptMUST<bcp14>MUST</bcp14> fail with NFS4ERR_ACCESS. </t> </section> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Accessanchor="acl" numbered="true" toc="default"> <name>Access ControlAttributes" anchor="acl">Attributes</name> <t> Access Control Lists (ACLs) are file attributes that specify fine-grained access control. This section covers the"acl", "dacl", "sacl", "aclsupport", "mode","acl", "dacl", "sacl", "aclsupport", "mode", and"mode_set_masked""mode_set_masked" file attributes and their interactions. Note that file attributes may apply to any file system object. </t> <sectiontitle="Goals">numbered="true" toc="default"> <name>Goals</name> <t> ACLs and modes represent two well-established models for specifying permissions. This section specifies requirements that attempt to meet the following goals:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If a server supports the mode attribute, it should provide reasonable semantics to clients that only set and retrieve the mode attribute.</t> <t></li> <li> If a server supports ACL attributes, it should provide reasonable semantics to clients that only set and retrieve those attributes.</t> <t></li> <li> On servers that support the mode attribute, if ACL attributes have never been set on an object, via inheritance or explicitly, the behavior should be traditional UNIX-like behavior.</t></li> <li> <t> On servers that support the mode attribute, if the ACL attributes have been previously set on an object, either explicitly or via inheritance:<list> <t></t> <ul spacing="normal"> <li> Setting only the mode attribute should effectively control the traditional UNIX-like permissions of read, write, and execute on owner, owner_group, and other.</t> <t></li> <li> Setting only the mode attribute should provide reasonable security. For example, setting a mode of 000 should be enough to ensure that future OPEN operations for OPEN4_SHARE_ACCESS_READ or OPEN4_SHARE_ACCESS_WRITE by any principal fail, regardless of a previously existing or inherited ACL.</t> </list> </t> <t></li> </ul> </li> <li> NFSv4.1 may introduce different semantics relating to the mode and ACL attributes, but it does not render invalid any previously existing implementations. Additionally, this section provides clarifications based on previous implementations and discussions around them.</t> <t></li> <li> On servers that support both the mode and the acl or dacl attributes, the server must keep the two consistent with each other. The value of the mode attribute (with the exception of the three high-order bits described in <xref target="attrdef_mode"/>)format="default"/>) must be determined entirely by the value of the ACL, so that use of the mode is never required for anything other than setting the three high-order bits. See <xref target="setattr"/>format="default"/> for exact requirements.</t> <t></li> <li> When a mode attribute is set on an object, the ACL attributes may need to be modified in order to not conflict with the new mode. In such cases, it is desirable that the ACL keep as much information as possible. This includes information about inheritance, AUDIT and ALARM ACEs, and permissions granted and denied that do not conflict with the new mode.</t> </list> </t></li> </ul> </section> <sectiontitle="Filenumbered="true" toc="default"> <name>File AttributesDiscussion">Discussion</name> <section anchor="attrdef_acl"title="Attributenumbered="true" toc="default"> <name>Attribute 12:acl">acl</name> <t> The NFSv4.1 ACL attribute contains an array of Access Control Entries (ACEs) that are associated with the file system object. Although the client can set and get the acl attribute, the server is responsible for using the ACL to perform access control. The client can use the OPEN or ACCESS operations to check access without modifying or reading data or metadata. </t> <t> The NFS ACE structure is defined as follows: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ typedef uint32_t acetype4;</artwork> </figure> <figure> <artwork>typedef uint32_t aceflag4;</artwork> </figure> <figure> <artwork>typedef uint32_t acemask4;</artwork> </figure> <figure> <artwork>struct nfsace4 { acetype4 type; aceflag4 flag; acemask4 access_mask; utf8str_mixed who; };</artwork> </figure>]]></sourcecode> <t> To determine if a request succeeds, the server processes each nfsace4 entry in order. Only ACEs that have a "who" that matches the requester are considered. Each ACE is processed until all of the bits of the requester's access have been ALLOWED. Once a bit (see below) has been ALLOWED by an ACCESS_ALLOWED_ACE, it is no longer considered in the processing of later ACEs. If an ACCESS_DENIED_ACE is encountered where the requester's access still has unALLOWED bits in common with the "access_mask" of the ACE, the request is denied. When the ACL is fully processed, if there are bits in the requester's mask that have not been ALLOWED or DENIED, access is denied. </t> <t> Unlike the ALLOW and DENY ACE types, the ALARM and AUDIT ACE types do not affect a requester's access, and instead are for triggering events as a result of a requester's access attempt. Therefore, AUDIT and ALARM ACEs are processed only after processing ALLOW and DENY ACEs. </t> <t> The NFSv4.1 ACL model is quite rich. Some server platforms may provide access-control functionality that goes beyond the UNIX-style mode attribute, but that is not as rich as the NFS ACL model. So that users can take advantage of this more limited functionality, the server may support the acl attributes by mapping between its ACL model and the NFSv4.1 ACL model. Servers must ensure that the ACL they actually store or enforce is at least as strict as the NFSv4 ACL that was set. It is tempting to accomplish this by rejecting any ACL that falls outside the small set that can be represented accurately. However, such an approach can render ACLs unusable without special client-side knowledge of the server's mapping, which defeats the purpose of having a common NFSv4 ACL protocol. Therefore, servers should accept every ACL that they can without compromising security. To help accomplish this, servers may make a special exception, in the case of unsupported permission bits, to the rule that bits not ALLOWED or DENIED by an ACL must be denied. For example, a UNIX-style server might choose to silently allow read attribute permissions even though an ACL does not explicitly allow those permissions. (An ACL that explicitly denies permission to read attributes should still be rejected.) </t> <t> The situation is complicated by the fact that a server may have multiple modules that enforce ACLs. For example, the enforcement for NFSv4.1 access may be different from, but not weaker than, the enforcement for local access, and both may be different from the enforcement for access through other protocols such as SMB (Server Message Block). So it may be useful for a server to accept an ACL even if not all of its modules are able to support it. </t> <t> The guiding principle with regard to NFSv4 access is that the server must not accept ACLs that appear to make access to the file more restrictive than it really is. </t> <sectiontitle="ACE Type">numbered="true" toc="default"> <name>ACE Type</name> <t> The constants used for the type field (acetype4) are as follows: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ const ACE4_ACCESS_ALLOWED_ACE_TYPE = 0x00000000; const ACE4_ACCESS_DENIED_ACE_TYPE = 0x00000001; const ACE4_SYSTEM_AUDIT_ACE_TYPE = 0x00000002; const ACE4_SYSTEM_ALARM_ACE_TYPE = 0x00000003;</artwork> </figure>]]></sourcecode> <t> Only the ALLOWED and DENIED bits may be used in the dacl attribute, and only the AUDIT and ALARM bits may be used in the sacl attribute. All four are permitted in the acl attribute. </t><texttable> <ttcol>Value</ttcol> <ttcol>Abbreviation</ttcol> <ttcol>Description</ttcol> <c>ACE4_ACCESS_ALLOWED_ACE_TYPE</c> <c>ALLOW</c> <c><table align="center"> <thead> <tr> <th align="left">Value</th> <th align="left">Abbreviation</th> <th align="left">Description</th> </tr> </thead> <tbody> <tr> <td align="left">ACE4_ACCESS_ALLOWED_ACE_TYPE</td> <td align="left">ALLOW</td> <td align="left"> Explicitly grants the access defined in acemask4 to the file or directory.</c> <c>ACE4_ACCESS_DENIED_ACE_TYPE</c> <c>DENY</c> <c></td> </tr> <tr> <td align="left">ACE4_ACCESS_DENIED_ACE_TYPE</td> <td align="left">DENY</td> <td align="left"> Explicitly denies the access defined in acemask4 to the file or directory.</c> <c>ACE4_SYSTEM_AUDIT_ACE_TYPE</c> <c>AUDIT</c> <c></td> </tr> <tr> <td align="left">ACE4_SYSTEM_AUDIT_ACE_TYPE</td> <td align="left">AUDIT</td> <td align="left"> Log (in a system-dependent way) any access attempt to a file or directory that uses any of the access methods specified in acemask4.</c> <c>ACE4_SYSTEM_ALARM_ACE_TYPE</c> <c>ALARM</c> <c></td> </tr> <tr> <td align="left">ACE4_SYSTEM_ALARM_ACE_TYPE</td> <td align="left">ALARM</td> <td align="left"> Generate an alarm (in a system-dependent way) when any access attempt is made to a file or directory for the access methods specified in acemask4.</c> </texttable></td> </tr> </tbody> </table> <t> The"Abbreviation""Abbreviation" column denotes how the types will be referred to throughout the rest of this section. </t> </section> <section anchor="attrdef_aclsupport"title="Attributenumbered="true" toc="default"> <name>Attribute 13:aclsupport">aclsupport</name> <t> A server need not support all of the above ACE types. This attribute indicates which ACE types are supported for the current file system. The bitmask constants used to represent the above definitions within the aclsupport attribute are as follows: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ const ACL4_SUPPORT_ALLOW_ACL = 0x00000001; const ACL4_SUPPORT_DENY_ACL = 0x00000002; const ACL4_SUPPORT_AUDIT_ACL = 0x00000004; const ACL4_SUPPORT_ALARM_ACL = 0x00000008;</artwork> </figure>]]></sourcecode> <t> Servers that support either the ALLOW or DENY ACE typeSHOULD<bcp14>SHOULD</bcp14> support both ALLOW and DENY ACE types. </t> <t> Clients should not attempt to set an ACE unless the server claims support for that ACE type. If the server receives a request to set an ACE that it cannot store, itMUST<bcp14>MUST</bcp14> reject the request with NFS4ERR_ATTRNOTSUPP. If the server receives a request to set an ACE that it can store but cannot enforce, the serverSHOULD<bcp14>SHOULD</bcp14> reject the request with NFS4ERR_ATTRNOTSUPP. </t> <t> Support for any of the ACL attributes is optional (albeitRECOMMENDED).<bcp14>RECOMMENDED</bcp14>). However, a server that supports either of the new ACL attributes (dacl or sacl)MUST<bcp14>MUST</bcp14> allow use of the new ACL attributes to access all of the ACE types that it supports. In other words, if such a server supports ALLOW or DENY ACEs, then itMUST<bcp14>MUST</bcp14> support the dacl attribute, and if it supports AUDIT or ALARM ACEs, then itMUST<bcp14>MUST</bcp14> support the sacl attribute. </t> </section> <section anchor="acemask"title="ACEnumbered="true" toc="default"> <name>ACE AccessMask">Mask</name> <t> The bitmask constants used for the access mask field are as follows: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ const ACE4_READ_DATA = 0x00000001; const ACE4_LIST_DIRECTORY = 0x00000001; const ACE4_WRITE_DATA = 0x00000002; const ACE4_ADD_FILE = 0x00000002; const ACE4_APPEND_DATA = 0x00000004; const ACE4_ADD_SUBDIRECTORY = 0x00000004; const ACE4_READ_NAMED_ATTRS = 0x00000008; const ACE4_WRITE_NAMED_ATTRS = 0x00000010; const ACE4_EXECUTE = 0x00000020; const ACE4_DELETE_CHILD = 0x00000040; const ACE4_READ_ATTRIBUTES = 0x00000080; const ACE4_WRITE_ATTRIBUTES = 0x00000100; const ACE4_WRITE_RETENTION = 0x00000200; const ACE4_WRITE_RETENTION_HOLD = 0x00000400; const ACE4_DELETE = 0x00010000; const ACE4_READ_ACL = 0x00020000; const ACE4_WRITE_ACL = 0x00040000; const ACE4_WRITE_OWNER = 0x00080000; const ACE4_SYNCHRONIZE = 0x00100000;</artwork> </figure>]]></sourcecode> <t> Note that some masks have coincident values, for example, ACE4_READ_DATA and ACE4_LIST_DIRECTORY. The mask entries ACE4_LIST_DIRECTORY, ACE4_ADD_FILE, and ACE4_ADD_SUBDIRECTORY are intended to be used with directory objects, while ACE4_READ_DATA, ACE4_WRITE_DATA, and ACE4_APPEND_DATA are intended to be used with non-directory objects. </t> <sectiontitle="Discussionnumbered="true" toc="default"> <name>Discussion of MaskAttributes">Attributes</name> <t>ACE4_READ_DATA</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>READ</t> <t>OPEN</t></dd> <dt>Discussion:</dt> <dd> <t><list style="hanging"> <t hangText="ACE4_READ_DATA"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="READ" /> <t hangText="OPEN" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' />Permission to read the data of the file.<vspace blankLines='1' /></t> <t> ServersSHOULD<bcp14>SHOULD</bcp14> allow a user the ability to read the data of the file when only the ACE4_EXECUTE access mask bit is allowed. </t></list> </t> <t hangText="ACE4_LIST_DIRECTORY"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="READDIR" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_LIST_DIRECTORY</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>READDIR</dd> <dt>Discussion:</dt> <dd> Permission to list the contents of a directory.</t> </list> </t> <t hangText="ACE4_WRITE_DATA"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="WRITE" /> <t hangText="OPEN" /> <t hangText="SETATTR of size" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl> </li> </ul> <t>ACE4_WRITE_DATA</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>WRITE</t> <t>OPEN</t> <t>SETATTR of size</t> </dd> <dt>Discussion:</dt> <dd> Permission to modify a file's data.</t> </list> </t> <t hangText="ACE4_ADD_FILE"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="CREATE" /> <t hangText="LINK" /> <t hangText="OPEN" /> <t hangText="RENAME" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl> </li></ul> <t>ACE4_ADD_FILE</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>CREATE</t> <t>LINK</t> <t>OPEN</t> <t>RENAME</t> </dd> <dt>Discussion:</dt> <dd> Permission to add a new file in a directory. The CREATE operation is affected when nfs_ftype4 is NF4LNK, NF4BLK, NF4CHR, NF4SOCK, or NF4FIFO. (NF4DIR is not listed because it is covered by ACE4_ADD_SUBDIRECTORY.) OPEN is affected when used to create a regular file. LINK and RENAME are always affected.</t> </list> </t> <t hangText="ACE4_APPEND_DATA"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="WRITE" /> <t hangText="OPEN" /> <t hangText="SETATTR of size" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_APPEND_DATA</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>WRITE</t> <t>OPEN</t> <t>SETATTR of size</t> </dd> <dt>Discussion:</dt> <dd> The ability to modify a file's data, but only starting at EOF. This allows for the notion of append-only files, by allowing ACE4_APPEND_DATA and denying ACE4_WRITE_DATA to the same user or group. If a file has an ACL such as the one described above and a WRITE request is made for somewhere other than EOF, the serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_ACCESS.</t> </list> </t> <t hangText="ACE4_ADD_SUBDIRECTORY"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="CREATE" /> <t hangText="RENAME" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_ADD_SUBDIRECTORY</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>CREATE</t> <t>RENAME</t></dd> <dt>Discussion:</dt> <dd> Permission to create a subdirectory in a directory. The CREATE operation is affected when nfs_ftype4 is NF4DIR. The RENAME operation is always affected.</t> </list> </t> <t hangText="ACE4_READ_NAMED_ATTRS"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="OPENATTR" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_READ_NAMED_ATTRS</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>OPENATTR</t></dd> <dt>Discussion:</dt> <dd> Permission to read the named attributes of a file or to look up the named attribute directory. OPENATTR is affected when it is not used to create a named attribute directory. This is when 1) createdir is TRUE, but a named attribute directory already exists, or 2) createdir is FALSE.</t> </list> </t> <t hangText="ACE4_WRITE_NAMED_ATTRS"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="OPENATTR" /> <t hangText="" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_WRITE_NAMED_ATTRS</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>OPENATTR</t> </dd> <dt>Discussion:</dt> <dd> Permission to write the named attributes of a file or to create a named attribute directory. OPENATTR is affected when it is used to create a named attribute directory. This is when createdir is TRUE and no named attribute directory exists. The ability to check whether or not a named attribute directory exists depends on the ability to look it up; therefore, users also need the ACE4_READ_NAMED_ATTRS permission in order to create a named attribute directory.</t> </list> </t> <t hangText="ACE4_EXECUTE"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="READ" /> <t hangText="OPEN" /> <t hangText="REMOVE" /> <t hangText="RENAME" /> <t hangText="LINK" /> <t hangText="CREATE" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl> </li> </ul> <t>ACE4_EXECUTE</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>READ</t> <t>OPEN</t> <t>REMOVE</t> <t>RENAME</t> <t>LINK</t> <t>CREATE</t> </dd> <dt>Discussion:</dt> <dd> <t> Permission to execute a file.<vspace blankLines='1' /></t> <t> ServersSHOULD<bcp14>SHOULD</bcp14> allow a user the ability to read the data of the file when only the ACE4_EXECUTE access mask bit is allowed. This is because there is no way to execute a file without reading the contents. Though a server may treat ACE4_EXECUTE and ACE4_READ_DATA bits identically when deciding to permit a READ operation, itSHOULD<bcp14>SHOULD</bcp14> still allow the two bits to be set independently in ACLs, andMUST<bcp14>MUST</bcp14> distinguish between them when replying to ACCESS operations. In particular, serversSHOULD NOT<bcp14>SHOULD NOT</bcp14> silently turn on one of the two bits when the other is set, as that would make it impossible for the client to correctly enforce the distinction between read and execute permissions.<vspace blankLines='1' /> As</t> <t>As an example, following a SETATTR of the followingACL: <vspace blankLines='1' /> nfsuser:ACE4_EXECUTE:ALLOW <vspace blankLines='1' />ACL:</t> <ul empty="true"> <li>nfsuser:ACE4_EXECUTE:ALLOW</li> </ul> <t> A subsequent GETATTR of ACL for that fileSHOULD<bcp14>SHOULD</bcp14> return:<vspace blankLines='1' /> nfsuser:ACE4_EXECUTE:ALLOW <vspace blankLines='1' /></t> <ul empty="true"> <li>nfsuser:ACE4_EXECUTE:ALLOW</li> </ul> <t> Rather than:<vspace blankLines='1' /> nfsuser:ACE4_EXECUTE/ACE4_READ_DATA:ALLOW </t> </list> </t> <t hangText="ACE4_EXECUTE"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="LOOKUP" /> </list></t><t hangText="Discussion:"> <vspace blankLines='1' /><ul empty="true"> <li> nfsuser:ACE4_EXECUTE/ACE4_READ_DATA:ALLOW </li></ul> </dd> </dl></li> </ul> <t>ACE4_EXECUTE</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>LOOKUP</dd> <dt>Discussion:</dt> <dd> Permission to traverse/search a directory.</t> </list> </t> <t hangText="ACE4_DELETE_CHILD"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="REMOVE" /> <t hangText="RENAME" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl> </li></ul> <t>ACE4_DELETE_CHILD</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>REMOVE</t> <t>RENAME</t></dd> <dt>Discussion:</dt> <dd> Permission to delete a file or directory within a directory. See <xreftarget="delete-delete_child"/>target="delete-delete_child" format="default"/> for information on ACE4_DELETE and ACE4_DELETE_CHILD interact.</t> </list> </t> <t hangText="ACE4_READ_ATTRIBUTES"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="GETATTR</dd> </dl></li> </ul> <t>ACE4_READ_ATTRIBUTES</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>GETATTR of file system objectattributes" /> <t hangText="VERIFY" /> <t hangText="NVERIFY" /> <t hangText="READDIR" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' />attributes</t> <t>VERIFY</t> <t>NVERIFY</t> <t>READDIR</t></dd> <dt>Discussion:</dt> <dd> The ability to read basic attributes (non-ACLs) of a file. On a UNIX system, basic attributes can be thought of as the stat-level attributes. Allowing this access mask bit would mean that the entity can execute "ls -l" and stat. If a READDIR operation requests attributes, this mask must be allowed for the READDIR to succeed.</t> </list> </t> <t hangText="ACE4_WRITE_ATTRIBUTES"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="SETATTR</dd> </dl></li> </ul> <t>ACE4_WRITE_ATTRIBUTES</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>SETATTR of time_access_set,time_backup," /> <t hangText="time_create,time_backup,</t> <t>time_create, time_modify_set, mimetype, hidden,system" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' />system</t></dd> <dt>Discussion:</dt> <dd> Permission to change the times associated with a file or directory to an arbitrary value. Also permission to change the mimetype, hidden, and system attributes. A user having ACE4_WRITE_DATA or ACE4_WRITE_ATTRIBUTES will be allowed to set the times associated with a file to the current server time.</t> </list> </t> <t hangText="ACE4_WRITE_RETENTION"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="SETATTR</dd> </dl></li> </ul> <t>ACE4_WRITE_RETENTION</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>SETATTR of retention_set,retentevt_set." /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' />retentevt_set.</dd> <dt>Discussion:</dt> <dd> Permission to modify the durations of event and non-event-based retention. Also permission to enable event and non-event-based retention. A serverMAY<bcp14>MAY</bcp14> behave such that setting ACE4_WRITE_ATTRIBUTES allows ACE4_WRITE_RETENTION.</t> </list> </t> <t hangText="ACE4_WRITE_RETENTION_HOLD"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="SETATTR of retention_hold." /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_WRITE_RETENTION_HOLD</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>SETATTR of retention_hold.</dd> <dt>Discussion:</dt> <dd> Permission to modify the administration retention holds. A serverMAY<bcp14>MAY</bcp14> map ACE4_WRITE_ATTRIBUTES to ACE_WRITE_RETENTION_HOLD.</t> </list> </t> <t hangText="ACE4_DELETE"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="REMOVE" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_DELETE</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>REMOVE</dd> <dt>Discussion:</dt> <dd> Permission to delete the file or directory. See <xreftarget="delete-delete_child"/>target="delete-delete_child" format="default"/> for information on ACE4_DELETE and ACE4_DELETE_CHILD interact.</t> </list> </t> <t hangText="ACE4_READ_ACL"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="GETATTR</dd> </dl></li> </ul> <t>ACE4_READ_ACL</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd><t>GETATTR of acl, dacl, orsacl" /> <t hangText="NVERIFY" /> <t hangText="VERIFY" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' />sacl</t> <t>NVERIFY</t> <t>VERIFY</t></dd> <dt>Discussion:</dt> <dd> Permission to read the ACL.</t> </list> </t> <t hangText="ACE4_WRITE_ACL"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="SETATTR</dd> </dl></li> </ul> <t>ACE4_WRITE_ACL</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>SETATTR of acl andmode" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /> Permissionmode</dd> <dt>Discussion:</dt> <dd>Permission to write the acl and modeattributes. </t> </list> </t> <t hangText="ACE4_WRITE_OWNER"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="SETATTRattributes.</dd> </dl></li> </ul> <t>ACE4_WRITE_OWNER</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>SETATTR of owner andowner_group" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' />owner_group</dd> <dt>Discussion:</dt> <dd> Permission to write the owner and owner_group attributes. On UNIX systems, this is the ability to execute chown() and chgrp().</t> </list> </t> <t hangText="ACE4_SYNCHRONIZE"> <list style="hanging"> <t hangText="Operation(s) affected:"> <list style="hanging"> <t hangText="NONE" /> </list> </t> <t hangText="Discussion:"> <vspace blankLines='1' /></dd> </dl></li> </ul> <t>ACE4_SYNCHRONIZE</t> <ul empty="true"><li> <dl newline="true" spacing="normal"> <dt>Operation(s) affected:</dt> <dd>NONE</dd> <dt>Discussion:</dt> <dd> <t> Permission to use the file object as a synchronization primitive for interprocess communication. This permission is not enforced or interpreted by the NFSv4.1 server on behalf of the client.<vspace blankLines='1' /></t> <t> Typically, the ACE4_SYNCHRONIZE permission is only meaningful on local file systems, i.e., file systems not accessed via NFSv4.1. The reason that the permission bit exists is that some operating environments, such as Windows, use ACE4_SYNCHRONIZE.<vspace blankLines='1' /></t> <t> For example, if a client copies a file that has ACE4_SYNCHRONIZE set from a local file system to an NFSv4.1 server, and then later copies the file from the NFSv4.1 server to a local file system, it is likely that if ACE4_SYNCHRONIZE was set in the original file, the client will want it set in the second copy. The first copy will not have the permission set unless the NFSv4.1 server has the means to set the ACE4_SYNCHRONIZE bit. The second copy will not have the permission set unless the NFSv4.1 server has the means to retrieve the ACE4_SYNCHRONIZE bit. </t></list> </t> </list> </t></dd> </dl></li> </ul> <t> Server implementations need not provide the granularity of control that is implied by this list of masks. For example, POSIX-based systems might not distinguish ACE4_APPEND_DATA (the ability to append to a file) from ACE4_WRITE_DATA (the ability to modify existing contents); both masks would be tied to a single "write" permission <xreftarget="chmod"/>.target="chmod" format="default"/>. When such a server returns attributes to the client, it would show both ACE4_APPEND_DATA and ACE4_WRITE_DATA if and only if the write permission is enabled. </t> <t> If a server receives a SETATTR request that it cannot accurately implement, it should err in the direction of more restricted access, except in the previously discussed cases of execute and read. For example, suppose a server cannot distinguish overwriting data from appending new data, as described in the previous paragraph. If a client submits an ALLOW ACE where ACE4_APPEND_DATA is set but ACE4_WRITE_DATA is not (or vice versa), the server should either turn off ACE4_APPEND_DATA or reject the request with NFS4ERR_ATTRNOTSUPP. </t> </section> <section anchor="delete-delete_child"title="ACE4_DELETEnumbered="true" toc="default"> <name>ACE4_DELETE vs.ACE4_DELETE_CHILD">ACE4_DELETE_CHILD</name> <t> Two access mask bits govern the ability to delete a directory entry: ACE4_DELETE on the object itself (the "target") and ACE4_DELETE_CHILD on the containing directory (the "parent"). </t> <t> Many systems also take the "sticky bit" (MODE4_SVTX) on a directory to allow unlink only to a user that owns either the target or the parent; on some such systems the decision also depends on whether the target is writable. </t> <t> ServersSHOULD<bcp14>SHOULD</bcp14> allow unlink if either ACE4_DELETE is permitted on the target, or ACE4_DELETE_CHILD is permitted on the parent. (Note that this is true even if the parent or target explicitly denies one of these permissions.) </t> <t> If the ACLs in question neither explicitly ALLOW nor DENY either of the above, and if MODE4_SVTX is not set on the parent, then the serverSHOULD<bcp14>SHOULD</bcp14> allow the removal if and only if ACE4_ADD_FILE is permitted. In the case where MODE4_SVTX is set, the server may also require the remover to own either the parent or the target, or may require the target to be writable. </t> <t> This allows servers to support something close to traditional UNIX-like semantics, with ACE4_ADD_FILE taking the place of the write bit. </t> </section> </section> <section anchor="aceflag"title="ACE flag">numbered="true" toc="default"> <name>ACE flag</name> <t> The bitmask constants used for the flag field are as follows:<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ const ACE4_FILE_INHERIT_ACE = 0x00000001; const ACE4_DIRECTORY_INHERIT_ACE = 0x00000002; const ACE4_NO_PROPAGATE_INHERIT_ACE = 0x00000004; const ACE4_INHERIT_ONLY_ACE = 0x00000008; const ACE4_SUCCESSFUL_ACCESS_ACE_FLAG = 0x00000010; const ACE4_FAILED_ACCESS_ACE_FLAG = 0x00000020; const ACE4_IDENTIFIER_GROUP = 0x00000040; const ACE4_INHERITED_ACE = 0x00000080;</artwork> </figure>]]></sourcecode> <t> A server need not support any of these flags. If the server supports flags that are similar to, but not exactly the same as, these flags, the implementation may define a mapping between the protocol-defined flags and the implementation-defined flags. </t> <t> For example, suppose a client tries to set an ACE with ACE4_FILE_INHERIT_ACE set but not ACE4_DIRECTORY_INHERIT_ACE. If the server does not support any form of ACL inheritance, the server should reject the request with NFS4ERR_ATTRNOTSUPP. If the server supports a single "inherit ACE" flag that applies to both files and directories, the server may reject the request (i.e., requiring the client to set both the file and directory inheritance flags). The server may also accept the request and silently turn on the ACE4_DIRECTORY_INHERIT_ACE flag. </t> <sectiontitle="Discussionnumbered="true" toc="default"> <name>Discussion of FlagBits"> <t> <list style="hanging"> <t hangText="ACE4_FILE_INHERIT_ACE"> <vspace />Bits</name> <dl newline="true" spacing="normal"> <dt>ACE4_FILE_INHERIT_ACE</dt> <dd> Any non-directory file in any sub-directory will get this ACE inherited.</t> <t hangText="ACE4_DIRECTORY_INHERIT_ACE"> <vspace /></dd> <dt>ACE4_DIRECTORY_INHERIT_ACE</dt> <dd> <t> Can be placed on a directory and indicates that this ACE should be added to each new directory created.<vspace /></t> <t> If this flag is set in an ACE in an ACL attribute to be set on a non-directory file system object, the operation attempting to set the ACLSHOULD<bcp14>SHOULD</bcp14> fail with NFS4ERR_ATTRNOTSUPP. </t><t hangText="ACE4_NO_PROPAGATE_INHERIT_ACE"> <vspace /></dd> <dt>ACE4_NO_PROPAGATE_INHERIT_ACE</dt> <dd> Can be placed on a directory. This flag tells the server that inheritance of this ACE should stop at newly created child directories.</t> <t hangText="ACE4_INHERIT_ONLY_ACE"> <vspace /></dd> <dt>ACE4_INHERIT_ONLY_ACE</dt> <dd> <t> Can be placed on a directory but does not apply to the directory; ALLOW and DENY ACEs with this bit set do not affect access to the directory, and AUDIT and ALARM ACEs with this bit set do not trigger log or alarm events. Such ACEs only take effect once they are applied (with this bit cleared) to newly created files and directories as specified by the ACE4_FILE_INHERIT_ACE and ACE4_DIRECTORY_INHERIT_ACE flags.<vspace blankLines="1"/></t> <t> If this flag is present on an ACE, but neither ACE4_DIRECTORY_INHERIT_ACE nor ACE4_FILE_INHERIT_ACE is present, then an operation attempting to set such an attributeSHOULD<bcp14>SHOULD</bcp14> fail with NFS4ERR_ATTRNOTSUPP. </t><t hangText="ACE4_SUCCESSFUL_ACCESS_ACE_FLAG"> <vspace /> </t> <t hangText="ACE4_FAILED_ACCESS_ACE_FLAG"> <vspace /></dd> <dt>ACE4_SUCCESSFUL_ACCESS_ACE_FLAG and ACE4_FAILED_ACCESS_ACE_FLAG</dt> <dd> <t> The ACE4_SUCCESSFUL_ACCESS_ACE_FLAG (SUCCESS) and ACE4_FAILED_ACCESS_ACE_FLAG (FAILED) flag bits may be set only on ACE4_SYSTEM_AUDIT_ACE_TYPE (AUDIT) and ACE4_SYSTEM_ALARM_ACE_TYPE (ALARM) ACE types. If during the processing of the file's ACL, the server encounters an AUDIT or ALARM ACE that matches the principal attempting the OPEN, the server notes that fact, and the presence, if any, of the SUCCESS and FAILED flags encountered in the AUDIT or ALARM ACE. Once the server completes the ACL processing, it then notes if the operation succeeded or failed. If the operation succeeded, and if the SUCCESS flag was set for a matching AUDIT or ALARM ACE, then the appropriate AUDIT or ALARM event occurs. If the operation failed, and if the FAILED flag was set for the matching AUDIT or ALARM ACE, then the appropriate AUDIT or ALARM event occurs. Either or both of the SUCCESS or FAILED can be set, but if neither is set, the AUDIT or ALARM ACE is not useful. </t><t hangText=""><t> The previously described processing applies to ACCESS operations even when they return NFS4_OK. For the purposes of AUDIT and ALARM, we consider an ACCESS operation to be a "failure" if it fails to return a bit that was requested andsupported. </t> <t hangText="ACE4_IDENTIFIER_GROUP"> <vspace />supported.</t> </dd> <dt>ACE4_IDENTIFIER_GROUP</dt> <dd> Indicates that the "who" refers to a GROUP as defined under UNIX or a GROUP ACCOUNT as defined under Windows. Clients and serversMUST<bcp14>MUST</bcp14> ignore the ACE4_IDENTIFIER_GROUP flag on ACEs with a who value equal to one of the special identifiers outlined in <xref target="acewho"/>. </t> <t hangText="ACE4_INHERITED_ACE"> <vspace />format="default"/>. </dd> <dt>ACE4_INHERITED_ACE</dt> <dd> Indicates that this ACE is inherited from a parent directory. A server that supports automatic inheritance will place this flag on any ACEs inherited from the parent directory when creating a new object. Client applications will use this to perform automatic inheritance. Clients and serversMUST<bcp14>MUST</bcp14> clear this bit in the acl attribute; it may only be used in the dacl and sacl attributes.</t> </list> </t></dd> </dl> </section> </section> <sectiontitle="ACE Who" anchor="acewho">anchor="acewho" numbered="true" toc="default"> <name>ACE Who</name> <t> The"who""who" field of an ACE is an identifier that specifies the principal or principals to whom the ACE applies. It may refer to a user or a group, with the flag bit ACE4_IDENTIFIER_GROUP specifying which. </t> <t> There are several special identifiers that need to be understood universally, rather than in the context of a particular DNS domain. Some of these identifiers cannot be understood when an NFS client accesses the server, but have meaning when a local process accesses the file. The ability to display and modify these permissions is permitted over NFS, even if none of the access methods on the server understands the identifiers. </t><texttable anchor="specialwho"> <ttcol>Who</ttcol> <ttcol>Description</ttcol> <c>OWNER</c> <c><table anchor="specialwho" align="center"> <thead> <tr> <th align="left">Who</th> <th align="left">Description</th> </tr> </thead> <tbody> <tr> <td align="left">OWNER</td> <td align="left"> The owner of the file.</c> <c>GROUP</c> <c></td> </tr> <tr> <td align="left">GROUP</td> <td align="left"> The group associated with the file.</c> <c>EVERYONE</c> <c></td> </tr> <tr> <td align="left">EVERYONE</td> <td align="left"> The world, including the owner and owning group.</c> <c>INTERACTIVE</c> <c></td> </tr> <tr> <td align="left">INTERACTIVE</td> <td align="left"> Accessed from an interactive terminal.</c> <c>NETWORK</c> <c></td> </tr> <tr> <td align="left">NETWORK</td> <td align="left"> Accessed via the network.</c> <c>DIALUP</c> <c></td> </tr> <tr> <td align="left">DIALUP</td> <td align="left"> Accessed as a dialup user to the server.</c> <c>BATCH</c> <c></td> </tr> <tr> <td align="left">BATCH</td> <td align="left"> Accessed from a batch job.</c> <c>ANONYMOUS</c> <c></td> </tr> <tr> <td align="left">ANONYMOUS</td> <td align="left"> Accessed without any authentication.</c> <c>AUTHENTICATED</c> <c></td> </tr> <tr> <td align="left">AUTHENTICATED</td> <td align="left"> Any authenticated user (opposite of ANONYMOUS).</c> <c>SERVICE</c> <c></td> </tr> <tr> <td align="left">SERVICE</td> <td align="left"> Access from a system service.</c> </texttable></td> </tr> </tbody> </table> <t> To avoid conflict, these special identifiers are distinguished by an appended "@" and should appear in the form "xxxx@" (with no domain name after the "@"), for example, ANONYMOUS@. </t> <t> The ACE4_IDENTIFIER_GROUP flagMUST<bcp14>MUST</bcp14> be ignored on entries with these special identifiers. When encoding entries with these special identifiers, the ACE4_IDENTIFIER_GROUP flagSHOULD<bcp14>SHOULD</bcp14> be set to zero. </t> <sectiontitle="Discussionnumbered="true" toc="default"> <name>Discussion ofEVERYONE@">EVERYONE@</name> <t> It is important to note that "EVERYONE@" is not equivalent to the UNIX "other" entity. This is because, by definition, UNIX "other" does not include the owner or owning group of a file. "EVERYONE@" means literally everyone, including the owner or owning group. </t> </section> </section> </section> <section anchor="attrdef_dacl"title="Attributenumbered="true" toc="default"> <name>Attribute 58:dacl">dacl</name> <t> The dacl attribute is like the acl attribute, but dacl allows just ALLOW and DENY ACEs. The dacl attribute supports automatic inheritance (see <xref target="auto_inherit"/>).format="default"/>). </t> </section> <section anchor="attrdef_sacl"title="Attributenumbered="true" toc="default"> <name>Attribute 59:sacl">sacl</name> <t> The sacl attribute is like the acl attribute, but sacl allows just AUDIT and ALARM ACEs. The sacl attribute supports automatic inheritance (see <xref target="auto_inherit"/>).format="default"/>). </t> </section> <section anchor="attrdef_mode"title="Attributenumbered="true" toc="default"> <name>Attribute 33:mode">mode</name> <t> The NFSv4.1 mode attribute is based on the UNIX mode bits. The following bits are defined: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ const MODE4_SUID = 0x800; /* set user id on execution */ const MODE4_SGID = 0x400; /* set group id on execution */ const MODE4_SVTX = 0x200; /* save text even after use */ const MODE4_RUSR = 0x100; /* read permission: owner */ const MODE4_WUSR = 0x080; /* write permission: owner */ const MODE4_XUSR = 0x040; /* execute permission: owner */ const MODE4_RGRP = 0x020; /* read permission: group */ const MODE4_WGRP = 0x010; /* write permission: group */ const MODE4_XGRP = 0x008; /* execute permission: group */ const MODE4_ROTH = 0x004; /* read permission: other */ const MODE4_WOTH = 0x002; /* write permission: other */ const MODE4_XOTH = 0x001; /* execute permission: other */</artwork> </figure>]]></sourcecode> <t> Bits MODE4_RUSR, MODE4_WUSR, and MODE4_XUSR apply to the principal identified in the owner attribute. Bits MODE4_RGRP, MODE4_WGRP, and MODE4_XGRP apply to principals identified in the owner_group attribute but who are not identified in the owner attribute. Bits MODE4_ROTH, MODE4_WOTH, and MODE4_XOTH apply to any principal that does not match that in the owner attribute and does not have a group matching that of the owner_group attribute. </t> <t> Bits within a mode other than those specified above are not defined by this protocol. A serverMUST NOT<bcp14>MUST NOT</bcp14> return bits other than those defined above in a GETATTR or READDIR operation, and itMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL if bits other than those defined above are set in a SETATTR, CREATE, OPEN, VERIFY, or NVERIFY operation. </t> </section> <section anchor="attrdef_mode_set_masked"title="Attributenumbered="true" toc="default"> <name>Attribute 74:mode_set_masked">mode_set_masked</name> <t> The mode_set_masked attribute is a write-only attribute that allows individual bits in the mode attribute to be set or reset, without changing others. It allows, for example, the bits MODE4_SUID, MODE4_SGID, and MODE4_SVTX to be modified while leaving unmodified any of the nine low-order mode bits devoted to permissions. </t> <t> In such instances that the nine low-order bits are left unmodified, then neither the acl nor the dacl attribute should be automatically modified as discussed in <xref target="setattr"/>.format="default"/>. </t> <t> The mode_set_masked attribute consists of two words, each in the form of a mode4. The first consists of the value to be applied to the current mode value and the second is a mask. Only bits set to one in the mask word are changed (set or reset) in the file's mode. All other bits in the mode remain unchanged. Bits in the first word that correspond to bits that are zero in the mask are ignored, except that undefined bits are checked for validity and can result in NFS4ERR_INVAL as described below. </t> <t> The mode_set_masked attribute is only valid in a SETATTR operation. If it is used in a CREATE or OPEN operation, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t> <t> Bits not defined as valid in the mode attribute are not valid in either word of the mode_set_masked attribute. The serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL if any such bits are set to one in a SETATTR. If the mode and mode_set_masked attributes are both specified in the same SETATTR, the serverMUST<bcp14>MUST</bcp14> also return NFS4ERR_INVAL. </t> </section> </section> <sectiontitle="Common Methods">numbered="true" toc="default"> <name>Common Methods</name> <t> The requirements in this section will be referred to in future sections, especially <xref target="aclreqs"/>.format="default"/>. </t> <sectiontitle="Interpretinganchor="useacl" numbered="true" toc="default"> <name>Interpreting anACL" anchor="useacl">ACL</name> <sectiontitle="Server Considerations" anchor="serverinterp">anchor="serverinterp" numbered="true" toc="default"> <name>Server Considerations</name> <t> The server uses the algorithm described in <xreftarget="attrdef_acl"/>target="attrdef_acl" format="default"/> to determine whether an ACL allows access to an object. However, the ACL might not be the sole determiner of access. For example:<list style="symbols"> <t></t> <ul spacing="normal"> <li> In the case of a file system exported as read-only, the server may deny write access even though an object's ACL grants it.</t> <t></li> <li> Server implementationsMAY<bcp14>MAY</bcp14> grant ACE4_WRITE_ACL and ACE4_READ_ACL permissions to prevent a situation from arising in which there is no valid way to ever modify the ACL.</t> <t></li> <li> All servers will allow a user the ability to read the data of the file when only the execute permission is granted (i.e., if the ACL denies the user the ACE4_READ_DATA access and allows the user ACE4_EXECUTE, the server will allow the user to read the data of the file).</t> <t></li> <li> Many servers have the notion of owner-override in which the owner of the object is allowed to override accesses that are denied by the ACL. This may be helpful, for example, to allow users continued access to open files on which the permissions have changed.</t> <t></li> <li> Many servers have the notion of a"superuser""superuser" that has privileges beyond an ordinary user. The superuser may be able to read or write data or metadata in ways that would not be permitted by the ACL.</t> <t></li> <li> A retention attribute might also block access otherwise allowed by ACLs (see <xreftarget="retention"/>). </t> </list> </t>target="retention" format="default"/>). </li> </ul> </section> <sectiontitle="Client Considerations" anchor="clientinterp">anchor="clientinterp" numbered="true" toc="default"> <name>Client Considerations</name> <t> ClientsSHOULD NOT<bcp14>SHOULD NOT</bcp14> do their own access checks based on their interpretation of the ACL, but rather use the OPEN and ACCESS operations to do access checks. This allows the client to act on the results of having the server determine whether or not access should be granted based on its interpretation of the ACL. </t> <t> Clients must be aware of situations in which an object's ACL will define a certain access even though the server will not enforce it. In general, but especially in these situations, the client needs to do its part in the enforcement of access as defined by the ACL. To do this, the clientMAY<bcp14>MAY</bcp14> send the appropriate ACCESS operation prior to servicing the request of the user or application in order to determine whether the user or application should be granted the access requested. For examples in which the ACL may define accesses that the server doesn't enforce, see <xreftarget="serverinterp"/>.target="serverinterp" format="default"/>. </t> </section> </section> <sectiontitle="Computinganchor="computemode" numbered="true" toc="default"> <name>Computing a Mode Attribute from anACL" anchor="computemode">ACL</name> <t> The following method can be used to calculate the MODE4_R*, MODE4_W*, and MODE4_X* bits of a mode attribute, based upon an ACL. </t> <t> First, for each of the special identifiers OWNER@, GROUP@, and EVERYONE@, evaluate the ACL in order, considering only ALLOW and DENY ACEs for the identifier EVERYONE@ and for the identifier under consideration. The result of the evaluation will be an NFSv4 ACL mask showing exactly which bits are permitted to that identifier. </t> <t> Then translate the calculated mask for OWNER@, GROUP@, and EVERYONE@ into mode bits for, respectively, the user, group, and other, as follows:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Set the read bit (MODE4_RUSR, MODE4_RGRP, or MODE4_ROTH) if and only if ACE4_READ_DATA is set in the corresponding mask.</t> <t></li> <li> Set the write bit (MODE4_WUSR, MODE4_WGRP, or MODE4_WOTH) if and only if ACE4_WRITE_DATA and ACE4_APPEND_DATA are both set in the corresponding mask.</t> <t></li> <li> Set the execute bit (MODE4_XUSR, MODE4_XGRP, or MODE4_XOTH), if and only if ACE4_EXECUTE is set in the corresponding mask.</t> </list> </t></li> </ol> <sectiontitle="Discussion">numbered="true" toc="default"> <name>Discussion</name> <t> Some server implementations also add bits permitted to named users and groups to the group bits (MODE4_RGRP, MODE4_WGRP, and MODE4_XGRP). </t> <t> Implementations are discouraged from doing this, because it has been found to cause confusion for users who see members of a file's group denied access that the mode bits appear to allow. (The presence of DENY ACEs may also lead to such behavior, but DENY ACEs are expected to be more rarely used.) </t> <t> The same user confusion seen when fetching the mode also results if setting the mode does not effectively control permissions for the owner, group, and other users; this motivates some of the requirements that follow. </t> </section> </section> </section> <sectiontitle="Requirements" anchor="aclreqs">anchor="aclreqs" numbered="true" toc="default"> <name>Requirements</name> <t> The server that supports both mode and ACL must take care to synchronize the MODE4_*USR, MODE4_*GRP, and MODE4_*OTH bits with the ACEs that have respective who fields of "OWNER@", "GROUP@", and "EVERYONE@". This way, the client can see if semantically equivalent access permissions exist whether the client asks for the owner, owner_group, and mode attributes or for just the ACL. </t> <t> In this section, much is made of the methods in <xref target="computemode"/>.format="default"/>. Many requirements refer to this section. But note that the methods have behaviors specified with"SHOULD"."<bcp14>SHOULD</bcp14>". This is intentional, to avoid invalidating existing implementations that compute the mode according to the withdrawn POSIX ACL draft (1003.1e draft 17), rather than by actual permissions on owner, group, and other. </t> <sectiontitle="Settinganchor="setattr" numbered="true" toc="default"> <name>Setting the Mode and/or ACLAttributes" anchor="setattr">Attributes</name> <t> In the case where a server supports the sacl or dacl attribute, in addition to the acl attribute, the serverMUST<bcp14>MUST</bcp14> fail a request to set the acl attribute simultaneously with a dacl or sacl attribute. The error to be given is NFS4ERR_ATTRNOTSUPP. </t> <sectiontitle="Settinganchor="setmode" numbered="true" toc="default"> <name>Setting Mode and notACL" anchor="setmode">ACL</name> <t> When any of the nine low-order mode bits are subject to change, either because the mode attribute was set or because the mode_set_masked attribute was set and the mask included one or more bits from the nine low-order mode bits, and no ACL attribute is explicitly set, the acl and dacl attributes must be modified in accordance with the updated value of those bits. This must happen even if the value of the low-order bits is the same after the mode is set as before. </t> <t> Note that any AUDIT or ALARM ACEs (hence any ACEs in the sacl attribute) are unaffected by changes to the mode. </t> <t> In cases in which the permissions bits are subject to change, the acl and dacl attributesMUST<bcp14>MUST</bcp14> be modified such that the mode computed via the method in <xref target="computemode"/>format="default"/> yields the low-order nine bits (MODE4_R*, MODE4_W*, MODE4_X*) of the mode attribute as modified by the attribute change. The ACL attributesSHOULD<bcp14>SHOULD</bcp14> also be modified such that:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> If MODE4_RGRP is not set, entities explicitly listed in the ACL other than OWNER@ and EVERYONE@SHOULD NOT<bcp14>SHOULD NOT</bcp14> be granted ACE4_READ_DATA.</t> <t></li> <li> If MODE4_WGRP is not set, entities explicitly listed in the ACL other than OWNER@ and EVERYONE@SHOULD NOT<bcp14>SHOULD NOT</bcp14> be granted ACE4_WRITE_DATA or ACE4_APPEND_DATA.</t> <t></li> <li> If MODE4_XGRP is not set, entities explicitly listed in the ACL other than OWNER@ and EVERYONE@SHOULD NOT<bcp14>SHOULD NOT</bcp14> be granted ACE4_EXECUTE.</t> </list></li> </ol> <t> Access mask bits other than those listed above, appearing in ALLOW ACEs,MAY<bcp14>MAY</bcp14> also be disabled. </t> <t> Note that ACEs with the flag ACE4_INHERIT_ONLY_ACE set do not affect the permissions of the ACL itself, nor do ACEs of the type AUDIT and ALARM. As such, it is desirable to leave these ACEs unmodified when modifying the ACL attributes. </t> <t> Also note that the requirement may be met by discarding the acl and dacl, in favor of an ACL that represents the mode and only the mode. This is permitted, but it is preferable for a server to preserve as much of the ACL as possible without violating the above requirements. Discarding the ACL makes it effectively impossible for a file created with a mode attribute to inherit an ACL (see <xref target="aclcreate"/>).format="default"/>). </t> </section> <sectiontitle="Settinganchor="settingacl" numbered="true" toc="default"> <name>Setting ACL and NotMode" anchor="settingacl">Mode</name> <t> When setting the acl or dacl and not setting the mode or mode_set_masked attributes, the permission bits of the mode need to be derived from the ACL. In this case, the ACL attributeSHOULD<bcp14>SHOULD</bcp14> be set as given. The nine low-order bits of the mode attribute (MODE4_R*, MODE4_W*, MODE4_X*)MUST<bcp14>MUST</bcp14> be modified to match the result of the method in <xref target="computemode"/>.format="default"/>. The three high-order bits of the mode (MODE4_SUID, MODE4_SGID, MODE4_SVTX)SHOULD<bcp14>SHOULD</bcp14> remain unchanged. </t> </section> <sectiontitle="Settinganchor="setboth" numbered="true" toc="default"> <name>Setting Both ACL andMode" anchor="setboth">Mode</name> <t> When setting both the mode (includes use of either the mode attribute or the mode_set_masked attribute) and the acl or dacl attributes in the same operation, the attributesMUST<bcp14>MUST</bcp14> be applied in this order: mode (or mode_set_masked), then ACL. The mode-related attribute is set as given, then the ACL attribute is set as given, possibly changing the final mode, as described above in <xref target="settingacl"/>.format="default"/>. </t> </section> </section> <sectiontitle="Retrievingnumbered="true" toc="default"> <name>Retrieving the Mode and/or ACLAttributes">Attributes</name> <t> This section applies only to servers that support both the mode and ACL attributes. </t> <t> Some server implementations may have a concept of"objects"objects withoutACLs",ACLs", meaning that all permissions are granted and denied according to the mode attribute and that no ACL attribute is stored for that object. If an ACL attribute is requested of such a server, the serverSHOULD<bcp14>SHOULD</bcp14> return an ACL that does not conflict with the mode; that is to say, the ACL returnedSHOULD<bcp14>SHOULD</bcp14> represent the nine low-order bits of the mode attribute (MODE4_R*, MODE4_W*, MODE4_X*) as described in <xref target="computemode"/>.format="default"/>. </t> <t> For other server implementations, the ACL attribute is always present for every object. Such serversSHOULD<bcp14>SHOULD</bcp14> store at least the three high-order bits of the mode attribute (MODE4_SUID, MODE4_SGID, MODE4_SVTX). The serverSHOULD<bcp14>SHOULD</bcp14> return a mode attribute if one is requested, and the low-order nine bits of the mode (MODE4_R*, MODE4_W*, MODE4_X*)MUST<bcp14>MUST</bcp14> match the result of applying the method in <xref target="computemode"/>format="default"/> to the ACL attribute. </t> </section> <sectiontitle="Creatinganchor="aclcreate" numbered="true" toc="default"> <name>Creating NewObjects" anchor="aclcreate">Objects</name> <t> If a server supports any ACL attributes, it may use the ACL attributes on the parent directory to compute an initial ACL attribute for a newly created object. This will be referred to as the inherited ACL within this section. The act of adding one or more ACEs to the inherited ACL that are based upon ACEs in the parent directory's ACL will be referred to as inheriting an ACE within this section. </t> <t> Implementors should standardize what the behavior of CREATE and OPEN must be depending on the presence or absence of the mode and ACL attributes.<list style="numbers"></t> <ol spacing="normal" type="1"> <li> <t>If just the mode is given in the call:<vspace blankLines="1" /></t> <t> In this case, inheritanceSHOULD<bcp14>SHOULD</bcp14> take place, but the modeMUST<bcp14>MUST</bcp14> be applied to the inherited ACL as described in <xref target="setmode"/>,format="default"/>, thereby modifying the ACL. </t> </li> <li> <t>If just the ACL is given in the call:<vspace blankLines="1" /></t> <t> In this case, inheritanceSHOULD NOT<bcp14>SHOULD NOT</bcp14> take place, and the ACL as defined in the CREATE or OPEN will be set without modification, and the mode modified as in <xref target="settingacl"/>.format="default"/>. </t> </li> <li> <t>If both mode and ACL are given in the call:<vspace blankLines="1" /></t> <t> In this case, inheritanceSHOULD NOT<bcp14>SHOULD NOT</bcp14> take place, and both attributes will be set as described in <xref target="setboth"/>.format="default"/>. </t> </li> <li> <t> If neither mode nor ACL is given in the call:<vspace blankLines="1" /></t> <t> In the case where an object is being created without any initial attributes at all, e.g., an OPEN operation with an opentype4 of OPEN4_CREATE and a createmode4 of EXCLUSIVE4, inheritanceSHOULD NOT<bcp14>SHOULD NOT</bcp14> take place (note that EXCLUSIVE4_1 is a better choice of createmode4, since it does permit initial attributes). Instead, the serverSHOULD<bcp14>SHOULD</bcp14> set permissions to deny all access to the newly created object. It is expected that the appropriate client will set the desired attributes in a subsequent SETATTR operation, and the serverSHOULD<bcp14>SHOULD</bcp14> allow that operation to succeed, regardless of what permissions the object is created with. For example, an empty ACL denies all permissions, but the server should allow the owner's SETATTR to succeed even though WRITE_ACL is implicitly denied.<vspace blankLines="1" /></t> <t> In other cases, inheritanceSHOULD<bcp14>SHOULD</bcp14> take place, and no modifications to the ACL will happen. The mode attribute, if supported,MUST<bcp14>MUST</bcp14> be as computed in <xref target="computemode"/>,format="default"/>, with the MODE4_SUID, MODE4_SGID, and MODE4_SVTX bits clear. If no inheritable ACEs exist on the parent directory, the rules for creating acl, dacl, or sacl attributes are implementation defined. If either the dacl or sacl attribute is supported, then the ACL4_DEFAULTED flagSHOULD<bcp14>SHOULD</bcp14> be set on the newly created attributes.<vspace blankLines='1' /> </t> </list></t> </li> </ol> <sectiontitle="Theanchor="inheritreq" numbered="true" toc="default"> <name>The InheritedACL" anchor="inheritreq">ACL</name> <t> If the object being created is not a directory, the inherited ACLSHOULD NOT<bcp14>SHOULD NOT</bcp14> inherit ACEs from the parent directory ACL unless the ACE4_FILE_INHERIT_FLAG is set. </t> <t> If the object being created is a directory, the inherited ACL should inherit all inheritable ACEs from the parent directory, that is, those that have the ACE4_FILE_INHERIT_ACE or ACE4_DIRECTORY_INHERIT_ACE flag set. If the inheritable ACE has ACE4_FILE_INHERIT_ACE set but ACE4_DIRECTORY_INHERIT_ACE is clear, the inherited ACE on the newly created directoryMUST<bcp14>MUST</bcp14> have the ACE4_INHERIT_ONLY_ACE flag set to prevent the directory from being affected by ACEs meant for non-directories. </t> <t> When a new directory is created, the serverMAY<bcp14>MAY</bcp14> split any inherited ACE that is both inheritable and effective (in other words, that has neither ACE4_INHERIT_ONLY_ACE nor ACE4_NO_PROPAGATE_INHERIT_ACE set), into two ACEs, one with no inheritance flags and one with ACE4_INHERIT_ONLY_ACE set. (In the case of a dacl or sacl attribute, both of those ACEsSHOULD<bcp14>SHOULD</bcp14> also have the ACE4_INHERITED_ACE flag set.) This makes it simpler to modify the effective permissions on the directory without modifying the ACE that is to be inherited to the new directory's children. </t> </section> <sectiontitle="Automatic Inheritance" anchor="auto_inherit">anchor="auto_inherit" numbered="true" toc="default"> <name>Automatic Inheritance</name> <t> The acl attribute consists only of an array of ACEs, but the <xreftarget="attrdef_sacl">sacl</xref>target="attrdef_sacl" format="default">sacl</xref> and <xreftarget="attrdef_dacl">dacl</xref>target="attrdef_dacl" format="default">dacl</xref> attributes also include an additional flag field.<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ struct nfsacl41 { aclflag4 na41_flag; nfsace4na41_aces<>;na41_aces<>; };</artwork> </figure>]]></sourcecode> <t> The flag field applies to the entire sacl or dacl; three flag values are defined:<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ const ACL4_AUTO_INHERIT = 0x00000001; const ACL4_PROTECTED = 0x00000002; const ACL4_DEFAULTED = 0x00000004;</artwork> </figure>]]></sourcecode> <t> and all other bits must be cleared. The ACE4_INHERITED_ACE flag may be set in the ACEs of the sacl or dacl (whereas it must always be cleared in the acl). </t> <t> Together these features allow a server to support automatic inheritance, which we now explain in more detail. </t> <t> Inheritable ACEs are normally inherited by child objects only at the time that the child objects are created; later modifications to inheritable ACEs do not result in modifications to inherited ACEs on descendants. </t> <t> However, the dacl and sacl provide anOPTIONAL<bcp14>OPTIONAL</bcp14> mechanism that allows a client application to propagate changes to inheritable ACEs to an entire directory hierarchy. </t> <t> A server that supports this performs inheritance at object creation time in the normal way, andSHOULD<bcp14>SHOULD</bcp14> set the ACE4_INHERITED_ACE flag on any inherited ACEs as they are added to the new object. </t> <t> A client application such as an ACL editor may then propagate changes to inheritable ACEs on a directory by recursively traversing that directory's descendants and modifying each ACL encountered to remove any ACEs with the ACE4_INHERITED_ACE flag and to replace them by the new inheritable ACEs (also with the ACE4_INHERITED_ACE flag set). It uses the existing ACE inheritance flags in the obvious way to decide which ACEs to propagate. (Note that it may encounter further inheritable ACEs when descending the directory hierarchy and that those will also need to be taken into account when propagating inheritable ACEs to further descendants.) </t> <t> The reach of this propagation may be limited in two ways: first, automatic inheritance is not performed from any directory ACL that has the ACL4_AUTO_INHERIT flag cleared; and second, automatic inheritance stops wherever an ACL with the ACL4_PROTECTED flag is set, preventing modification of that ACL and also (if the ACL is set on a directory) of the ACL on any of the object's descendants. </t> <t> This propagation is performed independently for the sacl and the dacl attributes; thus, the ACL4_AUTO_INHERIT and ACL4_PROTECTED flags may be independently set for the sacl and the dacl, and propagation of one type of acl may continue down a hierarchy even where propagation of the other acl has stopped. </t> <t> New objects should be created with a dacl and a sacl that both have the ACL4_PROTECTED flag cleared and the ACL4_AUTO_INHERIT flag set to the same value as that on, respectively, the sacl or dacl of the parent object. </t> <t> Both the dacl and sacl attributes areRECOMMENDED,<bcp14>RECOMMENDED</bcp14>, and a server may support one without supporting the other. </t> <t> A server that supports both the old acl attribute and one or both of the new dacl or sacl attributes must do so in such a way as to keep all three attributes consistent with each other. Thus, the ACEs reported in the acl attribute should be the union of the ACEs reported in the dacl and sacl attributes, except that the ACE4_INHERITED_ACE flag must be cleared from the ACEs in the acl. And of course a client that queries only the acl will be unable to determine the values of the sacl or dacl flag fields. </t> <t> When a client performs a SETATTR for the acl attribute, the serverSHOULD<bcp14>SHOULD</bcp14> set the ACL4_PROTECTED flag to true on both the sacl and the dacl. By using the acl attribute, as opposed to the dacl or sacl attributes, the client signals that it may not understand automatic inheritance, and thus cannot be trusted to set an ACL for which automatic inheritance would make sense. </t> <t> When a client application queries an ACL, modifies it, and sets it again, it should leave any ACEs marked with ACE4_INHERITED_ACE unchanged, in their original order, at the end of the ACL. If the application is unable to do this, it should set the ACL4_PROTECTED flag. This behavior is not enforced by servers, but violations of this rule may lead to unexpected results when applications perform automatic inheritance. </t> <t> If a server also supports the mode attribute, itSHOULD<bcp14>SHOULD</bcp14> set the mode in such a way that leaves inherited ACEs unchanged, in their original order, at the end of the ACL. If it is unable to do so, itSHOULD<bcp14>SHOULD</bcp14> set the ACL4_PROTECTED flag on the file's dacl. </t> <t>Finally, in the case where the request that creates a new file or directory does not also set permissions for that file or directory, and there are also no ACEs to inherit from the parent's directory, then the server's choice of ACL for the new object is implementation-dependent. In this case, the serverSHOULD<bcp14>SHOULD</bcp14> set the ACL4_DEFAULTED flag on the ACL it chooses for the new object. An application performing automatic inheritance takes the ACL4_DEFAULTED flag as a sign that the ACL should be completely replaced by one generated using the automatic inheritance rules. </t> </section> </section> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="single_server_namespace"title="Single-Server Namespace">numbered="true" toc="default"> <name>Single-Server Namespace</name> <t> This section describes the NFSv4 single-server namespace. Single-server namespaces may be presented directly to clients, or they may be used as a basis to form larger multi-server namespaces (e.g., site-wide or organization-wide) to be presented to clients, as described in <xreftarget='NEW11' />.target="NEW11" format="default"/>. </t> <section anchor="server_exports"title="Server Exports">numbered="true" toc="default"> <name>Server Exports</name> <t> On a UNIX server, the namespace describes all the files reachable by pathnames under the root directory or "/". On a Windows server, the namespace constitutes all the files on disks named by mapped disk letters. NFS server administrators rarely make the entire server's file system namespace available to NFS clients. More often, portions of the namespace are made available via an "export" feature. In previous versions of the NFS protocol, the root filehandle for each export is obtained through the MOUNT protocol; the client sent a string that identified the export name within the namespace and the server returned the root filehandle for that export. The MOUNT protocol also provided an EXPORTS procedure that enumerated the server's exports. </t> </section> <section anchor="browsing_exports"title="Browsing Exports">numbered="true" toc="default"> <name>Browsing Exports</name> <t> The NFSv4.1 protocol provides a root filehandle that clients can use to obtain filehandles for the exports of a particular server, via a series of LOOKUP operations within a COMPOUND, to traverse a path. A common user experience is to use a graphical user interface (perhaps a file "Open" dialog window) to find a file via progressive browsing through a directory tree. The client must be able to move from one export to another export via single-component, progressive LOOKUP operations. </t> <t> This style of browsing is not well supported by the NFSv3 protocol. In NFSv3, the client expects all LOOKUP operations to remain within a single server file system. For example, the device attribute will not change. This prevents a client from taking namespace paths that span exports. </t> <t> In the case of NFSv3, an automounter on the client can obtain a snapshot of the server's namespace using the EXPORTS procedure of the MOUNT protocol. If it understands the server's pathname syntax, it can create an image of the server's namespace on the client. The parts of the namespace that are not exported by the server are filled in with directories that might be constructed similarly to an NFSv4.1 "pseudo file system" (see <xref target="server_pseudo_file_system"/>)format="default"/>) that allows the user to browse from one mounted file system to another. There is a drawback to this representation of the server's namespace on the client: it is static. If the server administrator adds a new export, the client will be unaware of it. </t> </section> <section anchor="server_pseudo_file_system"title="Servernumbered="true" toc="default"> <name>Server Pseudo FileSystem">System</name> <t> NFSv4.1 servers avoid this namespace inconsistency by presenting all the exports for a given server within the framework of a single namespace for that server. An NFSv4.1 client uses LOOKUP and READDIR operations to browse seamlessly from one export to another. </t> <t> Where there are portions of the server namespace that are not exported, clients require some way of traversing those portions to reach actual exported file systems. A technique that servers may use to provide for this is to bridge the unexported portion of the namespace via a "pseudo file system" that provides a view of exported directories only. A pseudo file system has a unique fsid and behaves like a normal, read-only file system. </t> <t> Based on the construction of the server's namespace, it is possible that multiple pseudo file systems may exist. For example, </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ /a pseudo file system /a/b real file system /a/b/c pseudo file system /a/b/c/d real file system</artwork> </figure>]]></artwork> <t> Each of the pseudo file systems is considered a separate entity and thereforeMUST<bcp14>MUST</bcp14> have its own fsid, unique among all the fsids for that server. </t> </section> <sectiontitle="Multiple Roots">numbered="true" toc="default"> <name>Multiple Roots</name> <t> Certain operating environments are sometimes described as having "multiple roots". In such environments, individual file systems are commonly represented by disk or volume names. NFSv4 servers for these platforms can construct a pseudo file system above these root names so that disk letters or volume names are simply directory names in the pseudo root. </t> </section> <sectiontitle="Filehandle Volatility"anchor="pseudo_fs_volatility">numbered="true" toc="default"> <name>Filehandle Volatility</name> <t> The nature of the server's pseudo file system is that it is a logical representation of file system(s) available from the server. Therefore, the pseudo file system is most likely constructed dynamically when the server is first instantiated. It is expected that the pseudo file system may not have an on-disk counterpart from which persistent filehandles could be constructed. Even though it is preferable that the server provide persistent filehandles for the pseudo file system, the NFS client should expect that pseudo file system filehandles are volatile. This can be confirmed by checking the associated "fh_expire_type" attribute for those filehandles in question. If the filehandles are volatile, the NFS client must be prepared to recover a filehandle value (e.g., with a series of LOOKUP operations) when receiving an error of NFS4ERR_FHEXPIRED. </t> <t> Because it is quite likely that servers will implement pseudo file systems using volatile filehandles, clients need to be prepared for them, rather than assuming that all filehandles will be persistent. </t> </section> <sectiontitle="Exported Root">numbered="true" toc="default"> <name>Exported Root</name> <t> If the server's root file system is exported, one might conclude that a pseudo file system is unneeded. This is not necessarily so. Assume the following file systems on a server: </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ / fs1 (exported) /a fs2 (not exported) /a/b fs3(exported) </artwork> </figure>(exported)]]></artwork> <t> Because fs2 is not exported, fs3 cannot be reached with simple LOOKUPs. The server must bridge the gap with a pseudo file system. </t> </section> <sectiontitle="Mountnumbered="true" toc="default"> <name>Mount PointCrossing">Crossing</name> <t> The server file system environment may be constructed in such a way that one file system contains a directory that is 'covered' or mounted upon by a second file system. For example: </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ /a/b (file system 1) /a/b/c/d (file system2) </artwork> </figure>2)]]></artwork> <t> The pseudo file system for this server may be constructed to look like: </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ / (place holder/not exported) /a/b (file system 1) /a/b/c/d (file system2) </artwork> </figure>2)]]></artwork> <t> It is the server's responsibility to present the pseudo file system that is complete to the client. If the client sends a LOOKUP request for the path /a/b/c/d, the server's response is the filehandle of the root of the file system /a/b/c/d. In previous versions of the NFS protocol, the server would respond with the filehandle of directory /a/b/c/d within the file system /a/b. </t> <t> The NFS client will be able to determine if it crosses a server mount point by a change in the value of the "fsid" attribute. </t> </section> <sectiontitle="Securitynumbered="true" toc="default"> <name>Security Policy and NamespacePresentation">Presentation</name> <t> Because NFSv4 clients possess the ability to change the security mechanisms used, after determining what is allowed, by using SECINFO and SECINFO_NONAME, the serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> present a different view of the namespace based on the security mechanism being used by a client. Instead, it should present a consistent view and return NFS4ERR_WRONGSEC if an attempt is made to access data with an inappropriate security mechanism. </t> <t> If security considerations make it necessary to hide the existence of a particular file system, as opposed to all of the data within it, the server can apply the security policy of a shared resource in the server's namespace to components of the resource's ancestors. For example: </t><figure> <artwork><artwork name="" type="" align="left" alt=""><![CDATA[ / (place holder/not exported) /a/b (file system 1) /a/b/MySecretProject (file system2) </artwork> </figure>2)]]></artwork> <t> The /a/b/MySecretProject directory is a real file system and is the shared resource. Suppose the security policy for /a/b/MySecretProject is Kerberos with integrity and it is desired to limit knowledge of the existence of this file system. In this case, the server should apply the same security policy to /a/b. This allows for knowledge of the existence of a file system to be secured when desirable. </t> <t> For the case of the use of multiple, disjoint security mechanisms in the server's resources, applying that sort of policy would result in the higher-level file system not being accessible using any security flavor. Therefore, that sort of configuration is not compatible with hiding the existence (as opposed to the contents) from clients using multiple disjoint sets of security flavors. </t> <t> In other circumstances, a desirable policy is for the security of a particular object in the server's namespace to include the union of all security mechanisms of all direct descendants. A common and convenient practice, unless strong security requirements dictate otherwise, is to make the entire the pseudo file system accessible by all of the valid security mechanisms. </t> <t> Where there is concern about the security of data on the network, clients should use strong security mechanisms to access the pseudo file system in order to prevent man-in-the-middle attacks. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="State Management" >numbered="true" toc="default"> <name>State Management</name> <t> Integrating locking into the NFS protocol necessarily causes it to be stateful. With the inclusion of such features as share reservations, file and directory delegations, recallable layouts, and support for mandatory byte-range locking, the protocol becomes substantially more dependent on proper management of state than the traditional combination of NFS and NLM (Network Lock Manager) <xref target="xnfs"/>.format="default"/>. These features include expanded locking facilities, which provide some measure of inter-client exclusion, but the state also offers features not readily providable using a stateless model. There are three components to making this state manageable:<list style='symbols'> <t></t> <ul spacing="normal"> <li> clear division between client and server</t> <t></li> <li> ability to reliably detect inconsistency in state between client and server</t> <t></li> <li> simple and robust recovery mechanisms</t> </list> </t></li> </ul> <t> In this model, the server owns the state information. The client requests changes in locks and the server responds with the changes made. Non-client-initiated changes in locking state are infrequent. The client receives prompt notification of such changes and can adjust its view of the locking state to reflect the server's changes. </t> <t> Individual pieces of state created by the server and passed to the client at its request are represented by 128-bit stateids. These stateids may represent a particular open file, a set of byte-range locks held by a particular owner, or a recallable delegation of privileges to access a file in particular ways or at a particular location. </t> <t> In all cases, there is a transition from the most general information that represents a client as a whole to the eventual lightweight stateid used for most client and server locking interactions. The details of this transition will vary with the type of object but it always starts with a client ID. </t> <section anchor="client_id"title="Clientnumbered="true" toc="default"> <name>Client and SessionID" >ID</name> <t> A client must establish a client ID (see <xref target="Client_Identifiers"/>)format="default"/>) and then one or more sessionids (see <xref target="Session"/>)format="default"/>) before performing any operations to open, byte-range lock, delegate, or obtain a layout for a file object. Each session ID is associated with a specific client ID, and thus serves as a shorthand reference to an NFSv4.1 client. </t> <t> For some types of locking interactions, the client will represent some number of internal locking entities called "owners", which normally correspond to processes internal to the client. For other types of locking-related objects, such as delegations and layouts, no such intermediate entities are provided for, and the locking-related objects are considered to be transferred directly between the server and a unitary client. </t> </section><!-- "Client and Session ID" --><section anchor="stateid"title="Stateid Definition" >numbered="true" toc="default"> <name>Stateid Definition</name> <t> When the server grants a lock of any type (including opens, byte-range locks, delegations, and layouts), it responds with a unique stateid that represents a set of locks (often a single lock) for the same file, of the same type, and sharing the same ownership characteristics. Thus, opens of the same file by different open-owners each have an identifying stateid. Similarly, each set of byte-range locks on a file owned by a specific lock-owner has its own identifying stateid. Delegations and layouts also have associated stateids by which they may be referenced. The stateid is used as a shorthand reference to a lock or set of locks, and given a stateid, the server can determine the associated state-owner or state-owners (in the case of an open-owner/lock-owner pair) and the associated filehandle. When stateids are used, the current filehandle must be the one associated with that stateid. </t> <t> All stateids associated with a given client ID are associated with a common lease that represents the claim of those stateids and the objects they represent to be maintained by the server. See <xref target="lease_renewal"/>format="default"/> for a discussion of the lease. </t> <t> The server may assign stateids independently for different clients. A stateid with the same bit pattern for one client may designate an entirely different set of locks for a different client. The stateid is always interpreted with respect to the client ID associated with the current session. Stateids apply to all sessions associated with the given client ID, and the client may use a stateid obtained from one session on another session associated with the same client ID. </t> <section anchor="stateid_types"title="Stateid Types">numbered="true" toc="default"> <name>Stateid Types</name> <t> With the exception of special stateids (see <xreftarget="special_stateid"/>),target="special_stateid" format="default"/>), each stateid represents locking objects of one of a set of types defined by the NFSv4.1 protocol. Note that in all these cases, where we speak of guarantee, it is understood there are situations such as a client restart, or lock revocation, that allow the guarantee to be voided.<list style='symbols'></t> <ul spacing="normal"> <li> <t> Stateids may represent opens of files.<vspace blankLines="1" /></t> <t> Each stateid in this case represents the OPEN state for a given client ID/open-owner/filehandle triple. Such stateids are subject to change (with consequent incrementing of the stateid's seqid) in response to OPENs that result in upgrade and OPEN_DOWNGRADE operations. </t> </li> <li> <t> Stateids may represent sets of byte-range locks.<vspace blankLines="1" /></t> <t> All locks held on a particular file by a particular owner and gotten under the aegis of a particular open file are associated with a single stateid with the seqid being incremented whenever LOCK and LOCKU operations affect that set of locks. </t> </li> <li> <t> Stateids may represent file delegations, which are recallable guarantees by the server to the client that other clients will not reference or modify a particular file, until the delegation is returned. In NFSv4.1, file delegations may be obtained on both regular and non-regular files.<vspace blankLines="1" /></t> <t> A stateid represents a single delegation held by a client for a particular filehandle. </t> </li> <li> <t> Stateids may represent directory delegations, which are recallable guarantees by the server to the client that other clients will not modify the directory, until the delegation is returned.<vspace blankLines="1" /></t> <t> A stateid represents a single delegation held by a client for a particular directory filehandle. </t> </li> <li> <t> Stateids may represent layouts, which are recallable guarantees by the server to the client that particular files may be accessed via an alternate data access protocol at specific locations. Such access is limited to particular sets of byte-ranges and may proceed until those byte-ranges are reduced or the layout is returned.<vspace blankLines="1" /></t> <t> A stateid represents the set of all layouts held by a particular client for a particular filehandle with a given layout type. The seqid is updated as the layouts of that set of byte-ranges change, via layout stateid changing operations such as LAYOUTGET and LAYOUTRETURN. </t></list> </t></li> </ul> </section> <section anchor="stateid_structure"title="Stateid Structure">numbered="true" toc="default"> <name>Stateid Structure</name> <t> Stateids are divided into two fields, a 96-bit "other" field identifying the specific set of locks and a 32-bit "seqid" sequence value. Except in the case of special stateids (see <xreftarget="special_stateid"/>),target="special_stateid" format="default"/>), a particular value of the "other" field denotes a set of locks of the same type (for example, byte-range locks, opens, delegations, or layouts), for a specific file or directory, and sharing the same ownership characteristics. The seqid designates a specific instance of such a set of locks, and is incremented to indicate changes in such a set of locks, either by the addition or deletion of locks from the set, a change in the byte-range they apply to, or an upgrade or downgrade in the type of one or more locks. </t> <t> When such a set of locks is first created, the server returns a stateid with seqid value of one. On subsequent operations that modify the set of locks, the server is required to increment the "seqid" field by one whenever it returns a stateid for the same state-owner/file/type combination and there is some change in the set of locks actually designated. In this case, the server will return a stateid with an "other" field the same as previously used for that state-owner/file/type combination, with an incremented "seqid" field. This pattern continues until the seqid is incremented past NFS4_UINT32_MAX, and one (not zero) is the next seqid value. </t> <t> The purpose of the incrementing of the seqid is to allow the server to communicate to the client the order in which operations that modified locking state associated with a stateid have been processed and to make it possible for the client to send requests that are conditional on the set of locks not having changed since the stateid in question was returned. </t> <t> Except for layout stateids (<xreftarget="layout_stateid"/>),target="layout_stateid" format="default"/>), when a client sends a stateid to the server, it has two choices with regard to the seqid sent. It may set the seqid to zero to indicate to the server that it wishes the most up-to-date seqid for that stateid's "other" field to be used. This would be the common choice in the case of a stateid sent with a READ or WRITE operation. It also may set a non-zero value, in which case the server checks if that seqid is the correct one. In that case, the server is required to return NFS4ERR_OLD_STATEID if the seqid is lower than the most current value and NFS4ERR_BAD_STATEID if the seqid is greater than the most current value. This would be the common choice in the case of stateids sent with a CLOSE or OPEN_DOWNGRADE. Because OPENs may be sent in parallel for the same owner, a client might close a file without knowing that an OPEN upgrade had been done by the server, changing the lock in question. If CLOSE were sent with a zero seqid, the OPEN upgrade would be cancelled before the client even received an indication that an upgrade had happened. </t> <t> When a stateid is sent by the server to the client as part of a callback operation, it is not subject to checking for a current seqid and returning NFS4ERR_OLD_STATEID. This is because the client is not in a position to know the most up-to-date seqid and thus cannot verify it. Unless specially noted, the seqid value for a stateid sent by the server to the client as part of a callback is required to be zero with NFS4ERR_BAD_STATEID returned if it is not. </t> <t> In making comparisons between seqids, both by the client in determining the order of operations and by the server in determining whether the NFS4ERR_OLD_STATEID is to be returned, the possibility of the seqid being swapped around past the NFS4_UINT32_MAX value needs to be taken into account. When two seqid values are being compared, the total count of slots for all sessions associated with the current client is used to do this. When one seqid value is less than this total slot count and another seqid value is greater than NFS4_UINT32_MAX minus the total slot count, the former is to be treated as lower than the latter, despite the fact that it is numerically greater. </t> </section><!-- "Stateid Structure" --><section anchor="special_stateid"title="Special Stateids">numbered="true" toc="default"> <name>Special Stateids</name> <t> Stateid values whose "other" field is either all zeros or all ones are reserved. They may not be assigned by the server but have special meanings defined by the protocol. The particular meaning depends on whether the "other" field is all zeros or all ones and the specific value of the "seqid" field. </t> <t> The following combinations of "other" and "seqid" are defined in NFSv4.1:<list style='symbols'> <t></t> <ul spacing="normal"> <li> When "other" and "seqid" are both zero, the stateid is treated as a special anonymous stateid, which can be used in READ, WRITE, and SETATTR requests to indicate the absence of any OPEN state associated with the request. When an anonymous stateid value is used and an existing open denies the form of access requested, then access will be denied to the request. This stateidMUST NOT<bcp14>MUST NOT</bcp14> be used on operations to data servers (<xref target="ds_ops"/>). </t> <t>format="default"/>). </li> <li> When "other" and "seqid" are both all ones, the stateid is a special READ bypass stateid. When this value is used in WRITE or SETATTR, it is treated like the anonymous value. When used in READ, the serverMAY<bcp14>MAY</bcp14> grant access, even if access would normally be denied to READ operations. This stateidMUST NOT<bcp14>MUST NOT</bcp14> be used on operations to data servers.</t> <t></li> <li> When "other" is zero and "seqid" is one, the stateid represents the current stateid, which is whatever value is the last stateid returned by an operation within the COMPOUND. In the case of an OPEN, the stateid returned for the open file and not the delegation is used. The stateid passed to the operation in place of the special value has its "seqid" value set to zero, except when the current stateid is used by the operation CLOSE or OPEN_DOWNGRADE. If there is no operation in the COMPOUND that has returned a stateid value, the serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_BAD_STATEID. As illustrated in <xreftarget="csid_example4"/>,target="csid_example4" format="default"/>, if the value of a current stateid is a special stateid and the stateid of an operation's arguments has "other" set to zero and "seqid" set to one, then the serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_BAD_STATEID.</t> <t></li> <li> When "other" is zero and "seqid" is NFS4_UINT32_MAX, the stateid represents a reserved stateid value defined to be invalid. When this stateid is used, the serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_BAD_STATEID.</t> </list> </t></li> </ul> <t> If a stateid value is used that has all zeros or all ones in the "other" field but does not match one of the cases above, the serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_BAD_STATEID. </t> <t> Special stateids, unlike other stateids, are not associated with individual client IDs or filehandles and can be used with all valid client IDs and filehandles. In the case of a special stateid designating the current stateid, the current stateid value substituted for the special stateid is associated with a particular client ID and filehandle, and so, if it is used where the current filehandle does not match that associated with the current stateid, the operation to which the stateid is passed will return NFS4ERR_BAD_STATEID. </t> </section><!-- "Special Stateids" --><section anchor="stateid_lifetime"title="Stateidnumbered="true" toc="default"> <name>Stateid Lifetime andValidation">Validation</name> <t> Stateids must remain valid until either a client restart or a server restart or until the client returns all of the locks associated with the stateid by means of an operation such as CLOSE or DELEGRETURN. If the locks are lost due to revocation, as long as the client ID is valid, the stateid remains a valid designation of that revoked state until the client frees it by using FREE_STATEID. Stateids associated with byte-range locks are an exception. They remain valid even if a LOCKU frees all remaining locks, so long as the open file with which they are associated remains open, unless the client frees the stateids via the FREE_STATEID operation. </t> <t> It should be noted that there are situations in which the client's locks become invalid, without the client requesting they be returned. These include lease expiration and a number of forms of lock revocation within the lease period. It is important to note that in these situations, the stateid remains valid and the client can use it to determine the disposition of the associated lost locks. </t> <t> An "other" value must never be reused for a different purpose (i.e., different filehandle, owner, or type of locks) within the context of a single client ID. A server may retain the "other" value for the same purpose beyond the point where it may otherwise be freed, but if it does so, it must maintain "seqid" continuity with previous values. </t> <t> One mechanism that may be used to satisfy the requirement that the server recognize invalid and out-of-date stateids is for the server to divide the "other" field of the stateid into two fields.<list style='symbols'> <t></t> <ul spacing="normal"> <li> an index into a table of locking-state structures.</t> <t></li> <li> a generation number that is incremented on each allocation of a table entry for a particular use.</t> </list> </t></li> </ul> <t> And then store in each table entry,<list style='symbols'> <t></t> <ul spacing="normal"> <li> the client ID with which the stateid is associated.</t> <t></li> <li> the current generation number for the (at most one) valid stateid sharing this index value.</t> <t></li> <li> the filehandle of the file on which the locks are taken.</t> <t></li> <li> an indication of the type of stateid (open, byte-range lock, file delegation, directory delegation, layout).</t> <t></li> <li> the last "seqid" value returned corresponding to the current "other" value.</t> <t></li> <li> an indication of the current status of the locks associated with this stateid, in particular, whether these have been revoked and if so, for what reason.</t> </list> </t></li> </ul> <t> With this information, an incoming stateid can be validated and the appropriate error returned when necessary. Special and non-special stateids are handled separately. (See <xreftarget='special_stateid' />target="special_stateid" format="default"/> for a discussion of special stateids.) </t> <t> Note that stateids are implicitly qualified by the current client ID, as derived from the client ID associated with the current session. Note, however, that the semantics of the session will prevent stateids associated with a previous client or server instance from being analyzed by this procedure. </t> <t> If server restart has resulted in an invalid client ID or a session ID that is invalid, SEQUENCE will return an error and the operation that takes a stateid as an argument will never be processed. </t> <t> If there has been a server restart where there is a persistent session and all leased state has been lost, then the session in question will, although valid, be marked as dead, and any operation not satisfied by means of the reply cache will receive the error NFS4ERR_DEADSESSION, and thus not be processed as indicated below. </t> <t> When a stateid is being tested and the "other" field is all zeros or all ones, a check that the "other" and "seqid" fields match a defined combination for a special stateid is done and the results determined as follows:<list style='symbols'> <t></t> <ul spacing="normal"> <li> If the "other" and "seqid" fields do not match a defined combination associated with a special stateid, the error NFS4ERR_BAD_STATEID is returned.</t> <t></li> <li> If the special stateid is one designating the current stateid and there is a current stateid, then the current stateid is substituted for the special stateid and the checks appropriate to non-special stateids are performed.</t> <t></li> <li> If the combination is valid in general but is not appropriate to the context in which the stateid is used (e.g., an all-zero stateid is used when an OPEN stateid is required in a LOCK operation), the error NFS4ERR_BAD_STATEID is also returned.</t> <t></li> <li> Otherwise, the check is completed and the special stateid is accepted as valid.</t> </list> </t></li> </ul> <t> When a stateid is being tested, and the "other" field is neither all zeros nor all ones, the following procedure could be used to validate an incoming stateid and return an appropriate error, when necessary, assuming that the "other" field would be divided into a table index and an entry generation.<list style='symbols'> <t></t> <ul spacing="normal"> <li> If the table index field is outside the range of the associated table, return NFS4ERR_BAD_STATEID.</t> <t></li> <li> If the selected table entry is of a different generation than that specified in the incoming stateid, return NFS4ERR_BAD_STATEID.</t> <t></li> <li> If the selected table entry does not match the current filehandle, return NFS4ERR_BAD_STATEID.</t> <t></li> <li> If the client ID in the table entry does not match the client ID associated with the current session, return NFS4ERR_BAD_STATEID.</t> <t></li> <li> If the stateid represents revoked state, then return NFS4ERR_EXPIRED, NFS4ERR_ADMIN_REVOKED, or NFS4ERR_DELEG_REVOKED, as appropriate.</t> <t></li> <li> If the stateid type is not valid for the context in which the stateid appears, return NFS4ERR_BAD_STATEID. Note that a stateid may be valid in general, as would be reported by the TEST_STATEID operation, but be invalid for a particular operation, as, for example, when a stateid that doesn't represent byte-range locks is passed to the non-from_open case of LOCK or to LOCKU, or when a stateid that does not represent an open is passed to CLOSE or OPEN_DOWNGRADE. In such cases, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_BAD_STATEID.</t> <t></li> <li> If the "seqid" field is not zero and it is greater than the current sequence value corresponding to the current "other" field, return NFS4ERR_BAD_STATEID.</t> <t></li> <li> If the "seqid" field is not zero and it is less than the current sequence value corresponding to the current "other" field, return NFS4ERR_OLD_STATEID.</t> <t></li> <li> Otherwise, the stateid is valid and the table entry should contain any additional information about the type of stateid and information associated with that particular type of stateid, such as the associated set of locks, e.g., open-owner and lock-owner information, as well as information on the specific locks, e.g., open modes and byte-ranges.</t> </list> </t></li> </ul> </section><!-- "Stateid Lifetime and Validation" --><section anchor="stateid_use"title="Stateidnumbered="true" toc="default"> <name>Stateid Use for I/OOperations">Operations</name> <t> Clients performing I/O operations need to select an appropriate stateid based on the locks (including opens and delegations) held by the client and the various types of state-owners sending the I/O requests. SETATTR operations that change the file size are treated like I/O operations in this regard. </t> <t> The following rules, applied in order of decreasing priority, govern the selection of the appropriate stateid. In following these rules, the client will only consider locks of which it has actually received notification by an appropriate operation response or callback. Note that the rules are slightly different in the case of I/O to data servers when file layouts are being used (see <xref target="global_stateid"/>). <list style='symbols'> <t>format="default"/>). </t> <ul spacing="normal"> <li> If the client holds a delegation for the file in question, the delegation stateidSHOULD<bcp14>SHOULD</bcp14> be used.</t> <t></li> <li> Otherwise, if the entity corresponding to the lock-owner (e.g., a process) sending the I/O has a byte-range lock stateid for the associated open file, then the byte-range lock stateid for that lock-owner and open fileSHOULD<bcp14>SHOULD</bcp14> be used.</t> <t></li> <li> If there is no byte-range lock stateid, then the OPEN stateid for the open file in questionSHOULD<bcp14>SHOULD</bcp14> be used.</t> <t></li> <li> Finally, if none of the above apply, then a special stateidSHOULD<bcp14>SHOULD</bcp14> be used.</t> </list> </t></li> </ul> <t> Ignoring these rules may result in situations in which the server does not have information necessary to properly process the request. For example, when mandatory byte-range locks are in effect, if the stateid does not indicate the proper lock-owner, via a lock stateid, a request might be avoidably rejected. </t> <t> The server however should not try to enforce these ordering rules and should use whatever information is available to properly process I/O requests. In particular, when a client has a delegation for a given file, itSHOULD<bcp14>SHOULD</bcp14> take note of this fact in processing a request, even if it is sent with a special stateid. </t> </section><!-- "Stateid Use for I/O Operations" --><section anchor="stateid_use_sa"title="Stateidnumbered="true" toc="default"> <name>Stateid Use for SETATTROperations">Operations</name> <t> Because each operation is associated with a session ID and from that the clientid can be determined, operations do not need to include a stateid for the server to be able to determine whether they should cause a delegation to be recalled or are to be treated as done within the scope of the delegation. </t> <t> In the case of SETATTR operations, a stateid is present. In cases other than those that set the file size, the client may send either a special stateid or, when a delegation is held for the file in question, a delegation stateid. While the serverSHOULD<bcp14>SHOULD</bcp14> validate the stateid and may use the stateid to optimize the determination as to whether a delegation is held, itSHOULD<bcp14>SHOULD</bcp14> note the presence of a delegation even when a special stateid is sent, andMUST<bcp14>MUST</bcp14> accept a valid delegation stateid when sent. </t> </section><!-- "Stateid Use for SETATTR Operations" --></section><!-- "Stateid Definition" --><section anchor="lease_renewal"title="Lease Renewal" >numbered="true" toc="default"> <name>Lease Renewal</name> <t> Each client/server pair, as represented by a client ID, has a single lease. The purpose of the lease is to allow the client to indicate to the server, in a low-overhead way, that it is active, and thus that the server is to retain the client's locks. This arrangement allows the server to remove stale locking-related objects that are held by a client that has crashed or is otherwise unreachable, once the relevant lease expires. This in turn allows other clients to obtain conflicting locks without being delayed indefinitely by inactive or unreachable clients. It is not a mechanism for cache consistency and lease renewals may not be denied if the lease interval has not expired. </t> <t> Since each session is associated with a specific client (identified by the client's client ID), any operation sent on that session is an indication that the associated client is reachable. When a request is sent for a given session, successful execution of a SEQUENCE operation (or successful retrieval of the result of SEQUENCE from the reply cache) on an unexpired lease will result in the lease being implicitly renewed, for the standard renewal period (equal to the lease_time attribute). </t> <t> If the client ID's lease has not expired when the server receives a SEQUENCE operation, then the serverMUST<bcp14>MUST</bcp14> renew the lease. If the client ID's lease has expired when the server receives a SEQUENCE operation, the serverMAY<bcp14>MAY</bcp14> renew the lease; this depends on whether any state was revoked as a result of the client's failure to renew the lease before expiration. </t> <t> Absent other activity that would renew the lease, a COMPOUND consisting of a single SEQUENCE operation will suffice. The client should also take communication-related delays into account and take steps to ensure that the renewal messages actually reach the server in good time. For example:<list style='symbols'> <t></t> <ul spacing="normal"> <li> When trunking is in effect, the client should consider sending multiple requests on different connections, in order to ensure that renewal occurs, even in the event of blockage in the path used for one of those connections.</t></li> <li> <t> Transport retransmission delays might become so large as to approach or exceed the length of the lease period. This may be particularly likely when the server is unresponsive due to a restart; see <xref target="reclaim_locks"/>.format="default"/>. If the client implementation is not careful, transport retransmission delays can result in the client failing to detect a server restart before the grace period ends. The scenario is that the client is using a transport with exponential backoff, such that the maximum retransmission timeout exceeds both the grace period and the lease_time attribute. A network partition causes the client's connection's retransmission interval to back off, and even after the partition heals, the next transport-level retransmission is sent after the server has restarted and its grace period ends.<vspace blankLines="1" /></t> <t> The clientMUST<bcp14>MUST</bcp14> either recover from the ensuing NFS4ERR_NO_GRACE errors or itMUST<bcp14>MUST</bcp14> ensure that, despite transport-level retransmission intervals that exceed the lease_time, a SEQUENCE operation is sent that renews the lease before expiration. The client can achieve this by associating a new connection with the session, and sending a SEQUENCE operation on it. However, if the attempt to establish a new connection is delayed for some reason (e.g., exponential backoff of the connection establishment packets), the client will have to abort the connection establishment attempt before the lease expires, and attempt to reconnect. </t></list> </t></li> </ul> <t> If the server renews the lease upon receiving a SEQUENCE operation, the serverMUST NOT<bcp14>MUST NOT</bcp14> allow the lease to expire while the rest of the operations in the COMPOUND procedure's request are still executing. Once the last operation has finished, and the response to COMPOUND has been sent, the serverMUST<bcp14>MUST</bcp14> set the lease to expire no sooner than the sum of current time and the value of the lease_time attribute. </t> <t> A client ID's lease can expire when it has been at least the lease interval (lease_time) since the last lease-renewing SEQUENCE operation was sent on any of the client ID's sessions and there are no active COMPOUND operations on any such sessions. </t> <t> Because the SEQUENCE operation is the basic mechanism to renew a lease, and because it must be done at least once for each lease period, it is the natural mechanism whereby the server will inform the client of changes in the lease status that the client needs to be informed of. The client should inspect the status flags (sr_status_flags) returned by sequence and take the appropriate action (see <xref target="OP_SEQUENCE_DESCRIPTION"/>format="default"/> for details).<list style="symbols"> <t></t> <ul spacing="normal"> <li> The status bits SEQ4_STATUS_CB_PATH_DOWN and SEQ4_STATUS_CB_PATH_DOWN_SESSION indicate problems with the backchannel that the client may need to address in order to receive callback requests.</t> <t></li> <li> The status bits SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING and SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED indicate problems with GSS contexts or RPCSEC_GSS handles for the backchannel that the client might have to address in order to allow callback requests to be sent.</t> <t></li> <li> The status bits SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED, SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED, SEQ4_STATUS_ADMIN_STATE_REVOKED, and SEQ4_STATUS_RECALLABLE_STATE_REVOKED notify the client of lock revocation events. When these bits are set, the client should use TEST_STATEID to find what stateids have been revoked and use FREE_STATEID to acknowledge loss of the associated state.</t> <t></li> <li> The status bit SEQ4_STATUS_LEASE_MOVE indicates that responsibility for lease renewal has been transferred to one or more new servers.</t> <t></li> <li> The status bit SEQ4_STATUS_RESTART_RECLAIM_NEEDED indicates that due to server restart the client must reclaim locking state.</t> <t></li> <li> The status bit SEQ4_STATUS_BACKCHANNEL_FAULT indicates that the server has encountered an unrecoverable fault with the backchannel (e.g., it has lost track of a sequence ID for a slot in the backchannel).</t> </list> </t></li> </ul> </section><!-- "Lease Renewal" --><sectiontitle="Crash Recovery"anchor="lock_crash_recovery">numbered="true" toc="default"> <name>Crash Recovery</name> <t> A critical requirement in crash recovery is that both the client and the server know when the other has failed. Additionally, it is required that a client sees a consistent view of data across server restarts. All READ and WRITE operations that may have been queued within the client or network buffers must wait until the client has successfully recovered the locks protecting the READ and WRITE operations. Any that reach the server before the server can safely determine that the client has recovered enough locking state to be sure that such operations can be safely processed must be rejected. This will happen because either:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The state presented is no longer valid since it is associated with a now invalid client ID. In this case, the client will receive either an NFS4ERR_BADSESSION or NFS4ERR_DEADSESSION error, and any attempt to attach a new session to that invalid client ID will result in an NFS4ERR_STALE_CLIENTID error.</t> <t></li> <li> Subsequent recovery of locks may make execution of the operation inappropriate (NFS4ERR_GRACE).</t> </list> </t></li> </ul> <sectiontitle="Clientnumbered="true" toc="default"> <name>Client Failure andRecovery" >Recovery</name> <t> In the event that a client fails, the server may release the client's locks when the associated lease has expired. Conflicting locks from another client may only be granted after this lease expiration. As discussed in <xref target="lease_renewal"/>,format="default"/>, when a client has not failed and re-establishes its lease before expiration occurs, requests for conflicting locks will not be granted. </t> <t> To minimize client delay upon restart, lock requests are associated with an instance of the client by a client-supplied verifier. This verifier is part of the client_owner4 sent in the initial EXCHANGE_ID call made by the client. The server returns a client ID as a result of the EXCHANGE_ID operation. The client then confirms the use of the client ID by establishing a session associated with that client ID (see <xreftarget='OP_CREATE_SESSION_DESCRIPTION' />target="OP_CREATE_SESSION_DESCRIPTION" format="default"/> for a description of how this is done). All locks, including opens, byte-range locks, delegations, and layouts obtained by sessions using that client ID, are associated with that client ID. </t> <t> Since the verifier will be changed by the client upon each initialization, the server can compare a new verifier to the verifier associated with currently held locks and determine that they do not match. This signifies the client's new instantiation and subsequent loss (upon confirmation of the new client ID) of locking state. As a result, the server is free to release all locks held that are associated with the old client ID that was derived from the old verifier. At this point, conflicting locks from other clients, kept waiting while the lease had not yet expired, can be granted. In addition, all stateids associated with the old client ID can also be freed, as they are no longer reference-able. </t> <t> Note that the verifier must have the same uniqueness properties as the verifier for the COMMIT operation. </t> </section><!-- "Client Failure and Recovery" --><section anchor="server_failure"title="Servernumbered="true" toc="default"> <name>Server Failure andRecovery" >Recovery</name> <t> If the server loses locking state (usually as a result of a restart), it must allow clients time to discover this fact and re-establish the lost locking state. The client must be able to re-establish the locking state without having the server deny valid requests because the server has granted conflicting access to another client. Likewise, if there is a possibility that clients have not yet re-established their locking state for a file and that such locking state might make it invalid to perform READ or WRITE operations. For example, if mandatory locks are a possibility, the server must disallow READ and WRITE operations for that file. </t> <t> A client can determine that loss of locking state has occurred via several methods.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> When a SEQUENCE (most common) or other operation returns NFS4ERR_BADSESSION, this may mean that the session has been destroyed but the client ID is still valid. The client sends a CREATE_SESSION request with the client ID to re-establish the session. If CREATE_SESSION fails with NFS4ERR_STALE_CLIENTID, the client must establish a new client ID (see <xref target="client_id"/>)format="default"/>) and re-establish its lock state with the new client ID, after the CREATE_SESSION operation succeeds (see <xref target="reclaim_locks"/>). </t> <t>format="default"/>). </li> <li> When a SEQUENCE (most common) or other operation on a persistent session returns NFS4ERR_DEADSESSION, this indicates that a session is no longer usable for new, i.e., not satisfied from the reply cache, operations. Once all pending operations are determined to be either performed before the retry or not performed, the client sends a CREATE_SESSION request with the client ID to re-establish the session. If CREATE_SESSION fails with NFS4ERR_STALE_CLIENTID, the client must establish a new client ID (see <xref target="client_id"/>)format="default"/>) and re-establish its lock state after the CREATE_SESSION, with the new client ID, succeeds (<xref target="reclaim_locks"/>). </t> <t>format="default"/>). </li> <li> When an operation, neither SEQUENCE nor preceded by SEQUENCE (for example, CREATE_SESSION, DESTROY_SESSION), returns NFS4ERR_STALE_CLIENTID, the clientMUST<bcp14>MUST</bcp14> establish a new client ID (<xref target="client_id"/>)format="default"/>) and re-establish its lock state (<xref target="reclaim_locks"/>). </t> </list> </t>format="default"/>). </li> </ol> <section anchor="reclaim_locks"title="State Reclaim" >numbered="true" toc="default"> <name>State Reclaim</name> <t> When state information and the associated locks are lost as a result of a server restart, the protocol must provide a way to cause that state to be re-established. The approach used is to define, for most types of locking state (layouts are an exception), a request whose function is to allow the client to re-establish on the server a lock first obtained from a previous instance. Generally, these requests are variants of the requests normally used to create locks of that type and are referred to as "reclaim-type" requests, and the process of re-establishing such locks is referred to as "reclaiming" them. </t> <t anchor="read_write_grace"> Because each client must have an opportunity to reclaim all of the locks that it has without the possibility that some other client will be granted a conflicting lock, a "grace period" is devoted to the reclaim process. During this period, requests creating client IDs and sessions are handled normally, but locking requests are subject to special restrictions. Only reclaim-type locking requests are allowed, unless the server can reliably determine (through state persistently maintained across restart instances) that granting any such lock cannot possibly conflict with a subsequent reclaim. When a request is made to obtain a new lock (i.e., not a reclaim-type request) during the grace period and such a determination cannot be made, the server must return the error NFS4ERR_GRACE. </t> <t> Once a session is established using the new client ID, the client will use reclaim-type locking requests (e.g., LOCK operations with reclaim set to TRUE and OPEN operations with a claim type of CLAIM_PREVIOUS; see <xref target="open_br_reclaim"/>)format="default"/>) to re-establish its locking state. Once this is done, or if there is no such locking state to reclaim, the client sends a global RECLAIM_COMPLETE operation, i.e., one with the rca_one_fs argument set to FALSE, to indicate that it has reclaimed all of the locking state that it will reclaim. Once a client sends such a RECLAIM_COMPLETE operation, it may attempt non-reclaim locking operations, although it might get an NFS4ERR_GRACE status result from each such operation until the period of special handling is over. See <xref target="SEC11-EFF-lock"/>format="default"/> for a discussion of the analogous handling lock reclamation in the case of file systems transitioning from server to server. </t> <t> During the grace period, the server must reject READ and WRITE operations and non-reclaim locking requests (i.e., other LOCK and OPEN operations) with an error of NFS4ERR_GRACE, unless it can guarantee that these may be done safely, as described below. </t> <t> The grace period may last until all clients that are known to possibly have had locks have done a global RECLAIM_COMPLETE operation, indicating that they have finished reclaiming the locks they held before the server restart. This means that a client that has done a RECLAIM_COMPLETE must be prepared to receive an NFS4ERR_GRACE when attempting to acquire new locks. In order for the server to know that all clients with possible prior lock state have done a RECLAIM_COMPLETE, the server must maintain in stable storage a list clients that may have such locks. The server may also terminate the grace period before all clients have done a global RECLAIM_COMPLETE. The serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> terminate the grace period before a time equal to the lease period in order to give clients an opportunity to find out about the server restart, as a result of sending requests on associated sessions with a frequency governed by the lease time. Note that when a client does not send such requests (or they are sent by the client but not received by the server), it is possible for the grace period to expire before the client finds out that the server restart has occurred. </t> <t> Some additional time in order to allow a client to establish a new client ID and session and to effect lock reclaims may be added to the lease time. Note that analogous rules apply to file system-specific grace periods discussed in <xreftarget="SEC11-EFF-lock"/>.target="SEC11-EFF-lock" format="default"/>. </t> <t> If the server can reliably determine that granting a non-reclaim request will not conflict with reclamation of locks by other clients, the NFS4ERR_GRACE error does not have to be returned even within the grace period, although NFS4ERR_GRACE must always be returned to clients attempting a non-reclaim lock request before doing their own global RECLAIM_COMPLETE. For the server to be able to service READ and WRITE operations during the grace period, it must again be able to guarantee that no possible conflict could arise between a potential reclaim locking request and the READ or WRITE operation. If the server is unable to offer that guarantee, the NFS4ERR_GRACE error must be returned to the client. </t> <t> For a server to provide simple, valid handling during the grace period, the easiest method is to simply reject all non-reclaim locking requests and READ and WRITE operations by returning the NFS4ERR_GRACE error. However, a server may keep information about granted locks in stable storage. With this information, the server could determine if a locking, READ or WRITE operation can be safely processed. </t> <t> For example, if the server maintained on stable storage summary information on whether mandatory locks exist, either mandatory byte-range locks, or share reservations specifying deny modes, many requests could be allowed during the grace period. If it is known that no such share reservations exist, OPEN request that do not specify deny modes may be safely granted. If, in addition, it is known that no mandatory byte-range locks exist, either through information stored on stable storage or simply because the server does not support such locks, READ and WRITE operations may be safely processed during the grace period. Another important case is where it is known that no mandatory byte-range locks exist, either because the server does not provide support for them or because their absence is known from persistently recorded data. In this case, READ and WRITE operations specifying stateids derived from reclaim-type operations may be validly processed during the grace period because of the fact that the valid reclaim ensures that no lock subsequently granted can prevent the I/O. </t> <t> To reiterate, for a server that allows non-reclaim lock and I/O requests to be processed during the grace period, itMUST<bcp14>MUST</bcp14> determine that no lock subsequently reclaimed will be rejected and that no lock subsequently reclaimed would have prevented any I/O operation processed during the grace period. </t> <t> Clients should be prepared for the return of NFS4ERR_GRACE errors for non-reclaim lock and I/O requests. In this case, the client should employ a retry mechanism for the request. A delay (on the order of several seconds) between retries should be used to avoid overwhelming the server. Further discussion of the general issue is included in <xref target="Floyd"/>.format="default"/>. The client must account for the server that can perform I/O and non-reclaim locking requests within the grace period as well as those that cannot do so. </t> <t> A reclaim-type locking request outside the server's grace period can only succeed if the server can guarantee that no conflicting lock or I/O request has been granted since restart. </t> <t> A server may, upon restart, establish a new value for the lease period. Therefore, clients should, once a new client ID is established, refetch the lease_time attribute and use it as the basis for lease renewal for the lease associated with that server. However, the server must establish, for this restart event, a grace period at least as long as the lease period for the previous server instantiation. This allows the client state obtained during the previous server instance to be reliably re-established. </t> <t> The possibility exists that, because of server configuration events, the client will be communicating with a server different than the one on which the locks were obtained, as shown by the combination of eir_server_scope and eir_server_owner. This leads to the issue of if and when the client should attempt to reclaim locks previously obtained on what is being reported as a different server. The rules to resolve this question are as follows:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If the server scope is different, the client should not attempt to reclaim locks. In this situation, no lock reclaim is possible. Any attempt to re-obtain the locks with non-reclaim operations is problematic since there is no guarantee that the existing filehandles will be recognized by the new server, or that if recognized, they denote the same objects. It is best to treat the locks as having been revoked by the reconfiguration event.</t> <t></li> <li> If the server scope is the same, the client should attempt to reclaim locks, even if the eir_server_owner value is different. In this situation, it is the responsibility of the server to return NFS4ERR_NO_GRACE if it cannot provide correct support for lock reclaim operations, including the prevention of edge conditions.</t> </list> </t></li> </ul> <t> The eir_server_owner field is not used in making this determination. Its function is to specify trunking possibilities for the client (see <xref target="Trunking"/>)format="default"/>) and not to control lock reclaim. </t> <section anchor="reclaim_security_considerations"title="Securitynumbered="true" toc="default"> <name>Security Considerations for StateReclaim" >Reclaim</name> <t> During the grace period, a client can reclaim state that it believes or asserts it had before the server restarted. Unless the server maintained a complete record of all the state the client had, the server has little choice but to trust the client. (Of course, if the server maintained a complete record, then it would not have to force the client to reclaim state after server restart.) While the server has to trust the client to tell the truth, the negative consequences for security are limited to enabling denial-of-service attacks in situations in which AUTH_SYS is supported. The fundamental rule for the server when processing reclaim requests is that itMUST NOT<bcp14>MUST NOT</bcp14> grant the reclaim if an equivalent non-reclaim request would not be granted during steady state due to access control or access conflict issues. For example, an OPEN request during a reclaim will be refused with NFS4ERR_ACCESS if the principal making the request does not have access to open the file according to the discretionary ACL (<xreftarget="attrdef_dacl"/>)target="attrdef_dacl" format="default"/>) on the file. </t> <t> Nonetheless, it is possible that a client operating in error or maliciously could, during reclaim, prevent another client from reclaiming access to state. For example, an attacker could send an OPEN reclaim operation with a deny mode that prevents another client from reclaiming the OPEN state it had before the server restarted. The attacker could perform the same denial of service during steady state prior to server restart, as long as the attacker had permissions. Given that the attack vectors are equivalent, the grace period does not offer any additional opportunity for denial of service, and any concerns about this attack vector, whether during grace or steady state, are addressed the same way: use RPCSEC_GSS for authentication and limit access to the file only to principals that the owner of the file trusts. </t> <t> Note that if prior to restart the server had client IDs with the EXCHGID4_FLAG_BIND_PRINC_STATEID (<xreftarget="OP_EXCHANGE_ID"/>)target="OP_EXCHANGE_ID" format="default"/>) capability set, then the serverSHOULD<bcp14>SHOULD</bcp14> record in stable storage the client owner and the principal that established the client ID via EXCHANGE_ID. If the server does not, then there is a risk a client will be unable to reclaim state if it does not have a credential for a principal that was originally authorized to establish the state. </t> </section><!-- "Security Considerations for State Reclaim" --></section><!-- "State Reclaim" --></section><!-- "Server Failure and Recovery" --><section anchor="network_partitions_and_recovery"title="Networknumbered="true" toc="default"> <name>Network Partitions andRecovery">Recovery</name> <t> If the duration of a network partition is greater than the lease period provided by the server, the server will not have received a lease renewal from the client. If this occurs, the server may free all locks held for the client or it may allow the lock state to remain for a considerable period, subject to the constraint that if a request for a conflicting lock is made, locks associated with an expired lease do not prevent such a conflicting lock from being granted butMUST<bcp14>MUST</bcp14> be revoked as necessary so as to avoid interfering with such conflicting requests. </t> <t> If the server chooses to delay freeing of lock state until there is a conflict, it may either free all of the client's locks once there is a conflict or it may only revoke the minimum set of locks necessary to allow conflicting requests. When it adopts the finer-grained approach, it must revoke all locks associated with a given stateid, even if the conflict is with only a subset of locks. </t> <t> When the server chooses to free all of a client's lock state, either immediately upon lease expiration or as a result of the first attempt to obtain a conflicting a lock, the server may report the loss of lock state in a number of ways. </t> <t> The server may choose to invalidate the session and the associated client ID. In this case, once the client can communicate with the server, it will receive an NFS4ERR_BADSESSION error. Upon attempting to create a new session, it would get an NFS4ERR_STALE_CLIENTID. Upon creating the new client ID and new session, the client will attempt to reclaim locks. Normally, the server will not allow the client to reclaim locks, because the server will not be in its recovery grace period. </t> <t> Another possibility is for the server to maintain the session and client ID but for all stateids held by the client to become invalid or stale. Once the client can reach the server after such a network partition, the status returned by the SEQUENCE operation will indicate a loss of locking state; i.e., the flag SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED will be set in sr_status_flags. In addition, all I/O submitted by the client with the now invalid stateids will fail with the server returning the error NFS4ERR_EXPIRED. Once the client learns of the loss of locking state, it will suitably notify the applications that held the invalidated locks. The client should then take action to free invalidated stateids, either by establishing a new client ID using a new verifier or by doing a FREE_STATEID operation to release each of the invalidated stateids. </t> <t> When the server adopts a finer-grained approach to revocation of locks when a client's lease has expired, only a subset of stateids will normally become invalid during a network partition. When the client can communicate with the server after such a network partition heals, the status returned by the SEQUENCE operation will indicate a partial loss of locking state (SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED). In addition, operations, including I/O submitted by the client, with the now invalid stateids will fail with the server returning the error NFS4ERR_EXPIRED. Once the client learns of the loss of locking state, it will use the TEST_STATEID operation on all of its stateids to determine which locks have been lost and then suitably notify the applications that held the invalidated locks. The client can then release the invalidated locking state and acknowledge the revocation of the associated locks by doing a FREE_STATEID operation on each of the invalidated stateids. </t> <t> When a network partition is combined with a server restart, there are edge conditions that place requirements on the server in order to avoid silent data corruption following the server restart. Two of these edge conditions are known, and are discussed below. </t> <t> The first edge condition arises as a result of the scenarios such as the following:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> Client A acquires a lock.</t> <t></li> <li> Client A and server experience mutual network partition, such that client A is unable to renew its lease.</t> <t></li> <li> Client A's lease expires, and the server releases the lock.</t> <t></li> <li> Client B acquires a lock that would have conflicted with that of client A.</t> <t></li> <li> Client B releases its lock.</t> <t></li> <li> Server restarts.</t> <t></li> <li> Network partition between client A and server heals.</t> <t></li> <li> Client A connects to a new server instance and finds out about server restart.</t> <t></li> <li> Client A reclaims its lock within the server's grace period.</t> </list> </t></li> </ol> <t> Thus, at the final step, the server has erroneously granted client A's lock reclaim. If client B modified the object the lock was protecting, client A will experience object corruption. </t> <t> The second known edge condition arises in situations such as the following:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Client A acquires one or more locks.</t> <t></li> <li> Server restarts.</t> <t></li> <li> Client A and server experience mutual network partition, such that client A is unable to reclaim all of its locks within the grace period.</t> <t></li> <li> Server's reclaim grace period ends. Client A has either no locks or an incomplete set of locks known to the server.</t> <t></li> <li> Client B acquires a lock that would have conflicted with a lock of client A that was not reclaimed.</t> <t></li> <li> Client B releases the lock.</t> <t></li> <li> Server restarts a second time.</t> <t></li> <li> Network partition between client A and server heals.</t> <t></li> <li> Client A connects to new server instance and finds out about server restart.</t> <t></li> <li> Client A reclaims its lock within the server's grace period.</t> </list> </t></li> </ol> <t> As with the first edge condition, the final step of the scenario of the second edge condition has the server erroneously granting client A's lock reclaim. </t> <t> Solving the first and second edge conditions requires either that the server always assumes after it restarts that some edge condition occurs, and thus returns NFS4ERR_NO_GRACE for all reclaim attempts, or that the server record some information in stable storage. The amount of information the server records in stable storage is in inverse proportion to how harsh the server intends to be whenever edge conditions arise. The server that is completely tolerant of all edge conditions will record in stable storage every lock that is acquired, removing the lock record from stable storage only when the lock is released. For the two edge conditions discussed above, the harshest a server can be, and still support a grace period for reclaims, requires that the server record in stable storage some minimal information. For example, a server implementation could, for each client, save in stable storage a record containing:<list style="symbols"> <t></t> <ul spacing="normal"> <li> the co_ownerid field from the client_owner4 presented in the EXCHANGE_ID operation.</t> <t></li> <li> a boolean that indicates if the client's lease expired or if there was administrative intervention (see <xref target="server_revocation"/>)format="default"/>) to revoke a byte-range lock, share reservation, or delegation and there has been no acknowledgment, via FREE_STATEID, of such revocation.</t> <t></li> <li> a boolean that indicates whether the client may have locks that it believes to be reclaimable in situations in which the grace period was terminated, making the server's view of lock reclaimability suspect. The server will set this for any client record in stable storage where the client has not done a suitable RECLAIM_COMPLETE (global or file system-specific depending on the target of the lock request) before it grants any new (i.e., not reclaimed) lock to any client.</t> </list> </t></li> </ul> <t> Assuming the above record keeping, for the first edge condition, after the server restarts, the record that client A's lease expired means that another client could have acquired a conflicting byte-range lock, share reservation, or delegation. Hence, the server must reject a reclaim from client A with the error NFS4ERR_NO_GRACE. </t> <t> For the second edge condition, after the server restarts for a second time, the indication that the client had not completed its reclaims at the time at which the grace period ended means that the server must reject a reclaim from client A with the error NFS4ERR_NO_GRACE. </t> <t> When either edge condition occurs, the client's attempt to reclaim locks will result in the error NFS4ERR_NO_GRACE. When this is received, or after the client restarts with no lock state, the client will send a global RECLAIM_COMPLETE. When the RECLAIM_COMPLETE is received, the server and client are again in agreement regarding reclaimable locks and both booleans in persistent storage can be reset, to be set again only when there is a subsequent event that causes lock reclaim operations to be questionable. </t> <t> Regardless of the level and approach to record keeping, the serverMUST<bcp14>MUST</bcp14> implement one of the following strategies (which apply to reclaims of share reservations, byte-range locks, and delegations):<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Reject all reclaims with NFS4ERR_NO_GRACE. This is extremely unforgiving, but necessary if the server does not record lock state in stable storage.</t></li> <li> <t> Record sufficient state in stable storage such that all known edge conditions involving server restart, including the two noted in this section, are detected. It is acceptable to erroneously recognize an edge condition and not allow a reclaim, when, with sufficient knowledge, it would be allowed. The error the server would return in this case is NFS4ERR_NO_GRACE. Note that it is not known if there are other edge conditions.<vspace blankLines='1' /></t> <t> In the event that, after a server restart, the server determines there is unrecoverable damage or corruption to the information in stable storage, then for all clients and/or locks that may be affected, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NO_GRACE. </t></list> </t></li> </ol> <t> A mandate for the client's handling of the NFS4ERR_NO_GRACE error is outside the scope of this specification, since the strategies for such handling are very dependent on the client's operating environment. However, one potential approach is described below. </t> <t> When the client receives NFS4ERR_NO_GRACE, it could examine the change attribute of the objects for which the client is trying to reclaim state, and use that to determine whether to re-establish the state via normal OPEN or LOCK operations. This is acceptable provided that the client's operating environment allows it. In other words, the client implementor is advised to document for his users the behavior. The client could also inform the application that its byte-range lock or share reservations (whether or not they were delegated) have been lost, such as via a UNIX signal, a Graphical User Interface (GUI) pop-up window, etc. See <xref target="data_caching_revocation"/>format="default"/> for a discussion of what the client should do for dealing with unreclaimed delegations on client state. </t> <t> For further discussion of revocation of locks, see <xref target="server_revocation"/>.format="default"/>. </t> </section><!-- "Network Partitions and Recovery" --></section><!-- "Crash Recovery" --><section anchor="server_revocation"title="Servernumbered="true" toc="default"> <name>Server Revocation ofLocks" >Locks</name> <t> At any point, the server can revoke locks held by a client, and the client must be prepared for this event. When the client detects that its locks have been or may have been revoked, the client is responsible for validating the state information between itself and the server. Validating locking state for the client means that it must verify or reclaim state for each lock currently held. </t> <t> The first occasion of lock revocation is upon server restart. Note that this includes situations in which sessions are persistent and locking state is lost. In this class of instances, the client will receive an error (NFS4ERR_STALE_CLIENTID) on an operation that takes client ID, usually as part of recovery in response to a problem with the current session), and the client will proceed with normal crash recovery as described in the <xref target="reclaim_locks"/>.format="default"/>. </t> <t> The second occasion of lock revocation is the inability to renew the lease before expiration, as discussed in <xref target="network_partitions_and_recovery"/>.format="default"/>. While this is considered a rare or unusual event, the client must be prepared to recover. The server is responsible for determining the precise consequences of the lease expiration, informing the client of the scope of the lock revocation decided upon. The client then uses the status information provided by the server in the SEQUENCE results (field sr_status_flags, see <xref target="OP_SEQUENCE_DESCRIPTION"/>)format="default"/>) to synchronize its locking state with that of the server, in order to recover. </t> <t> The third occasion of lock revocation can occur as a result of revocation of locks within the lease period, either because of administrative intervention or because a recallable lock (a delegation or layout) was not returned within the lease period after having been recalled. While these are considered rare events, they are possible, and the client must be prepared to deal with them. When either of these events occurs, the client finds out about the situation through the status returned by the SEQUENCE operation. Any use of stateids associated with locks revoked during the lease period will receive the error NFS4ERR_ADMIN_REVOKED or NFS4ERR_DELEG_REVOKED, as appropriate. </t> <t> In all situations in which a subset of locking state may have been revoked, which include all cases in which locking state is revoked within the lease period, it is up to the client to determine which locks have been revoked and which have not. It does this by using the TEST_STATEID operation on the appropriate set of stateids. Once the set of revoked locks has been determined, the applications can be notified, and the invalidated stateids can be freed and lock revocation acknowledged by using FREE_STATEID. </t> </section><!-- "Server Revocation of Locks" --><sectiontitle="Shortnumbered="true" toc="default"> <name>Short and LongLeases" >Leases</name> <t> When determining the time period for the server lease, the usual leasetradeoffstrade-offs apply. A short lease is good for fast server recovery at a cost of increased operations to effect lease renewal (when there are no other operations during the period to effect lease renewal as a side effect). A long lease is certainly kinder and gentler to servers trying to handle very large numbers of clients. The number of extra requests to effect lock renewal drops in inverse proportion to the lease time. The disadvantages of a long lease include the possibility of slower recovery after certain failures. After server failure, a longer grace period may be required when some clients do not promptly reclaim their locks and do a global RECLAIM_COMPLETE. In the event of client failure, the longer period for a lease to expire will force conflicting requests to wait longer. </t> <t> A long lease is practical if the server can store lease state in stable storage. Upon recovery, the server can reconstruct the lease state from its stable storage and continue operation with its clients. </t> </section><!-- "Short and Long Leases" --><section anchor="lease_propagation_delay"title="Clocks,numbered="true" toc="default"> <name>Clocks, Propagation Delay, and Calculating LeaseExpiration" >Expiration</name> <t> To avoid the need for synchronized clocks, lease times are granted by the server as a time delta. However, there is a requirement that the client and server clocks do not drift excessively over the duration of the lease. There is also the issue of propagation delay across the network, which could easily be several hundred milliseconds, as well as the possibility that requests will be lost and need to be retransmitted. </t> <t> To take propagation delay into account, the client should subtract it from lease times (e.g., if the client estimates the one-way propagation delay as 200 milliseconds, then it can assume that the lease is already 200 milliseconds old when it gets it). In addition, it will take another 200 milliseconds to get a response back to the server. So the client must send a lease renewal or write data back to the server at least 400 milliseconds before the lease would expire. If the propagation delay varies over the life of the lease (e.g., the client is on a mobile host), the client will need to continuously subtract the increase in propagation delay from the lease times. </t> <t> The server's lease period configuration should take into account the network distance of the clients that will be accessing the server's resources. It is expected that the lease period will take into account the network propagation delays and other network delay factors for the client population. Since the protocol does not allow for an automatic method to determine an appropriate lease period, the server's administrator may have to tune the lease period. </t> </section><!-- "Clocks, Propagation Delay, and Calculating Lease Expiration" --><sectiontitle="Obsoleteanchor="vestigial_locking" numbered="true" toc="default"> <name>Obsolete Locking Infrastructure fromNFSv4.0" anchor="vestigial_locking" >NFSv4.0</name> <t> There are a number of operations and fields within existing operations that no longer have a function in NFSv4.1. In one way or another, these changes are all due to the implementation of sessions that provide client context and exactly once semantics as a base feature of the protocol, separate from locking itself. </t> <t> The following NFSv4.0 operationsMUST NOT<bcp14>MUST NOT</bcp14> be implemented in NFSv4.1. The serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOTSUPP if these operations are found in an NFSv4.1 COMPOUND.<list style='symbols'> <t></t> <ul spacing="normal"> <li> SETCLIENTID since its function has been replaced by EXCHANGE_ID.</t> <t></li> <li> SETCLIENTID_CONFIRM since client ID confirmation now happens by means of CREATE_SESSION.</t> <t></li> <li> OPEN_CONFIRM because state-owner-based seqids have been replaced by the sequence ID in the SEQUENCE operation.</t> <t></li> <li> RELEASE_LOCKOWNER because lock-owners with no associated locks do not have any sequence-related state and so can be deleted by the server at will.</t> <t></li> <li> RENEW because every SEQUENCE operation for a session causes lease renewal, making a separate operation superfluous.</t> </list> </t></li> </ul> <t> Also, there are a number of fields, present in existing operations, related to locking that have no use in minor version 1. They were used in minor version 0 to perform functions now provided in a different fashion.<list style='symbols'> <t></t> <ul spacing="normal"> <li> Sequence ids used to sequence requests for a given state-owner and to provide retry protection, now provided via sessions.</t> <t></li> <li> Client IDs used to identify the client associated with a given request. Client identification is now available using the client ID associated with the current session, without needing an explicit client ID field.</t> </list> </t></li> </ul> <t> Such vestigial fields in existing operations have no function in NFSv4.1 and are ignored by the server. Note that client IDs in operations new to NFSv4.1 (such as CREATE_SESSION and DESTROY_CLIENTID) are not ignored. </t> </section><!-- "Vestigial Locking Infrastructure From V4.0" --></section><!-- "State Management" --> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Fileanchor="file_locking" numbered="true" toc="default"> <name>File Locking and ShareReservations" anchor="file_locking">Reservations</name> <t> To support Win32 share reservations, it is necessary to provide operations that atomically open or create files. Having a separate share/unshare operation would not allow correct implementation of the Win32 OpenFile API. In order to correctly implement share semantics, the previous NFS protocol mechanisms used when a file is opened or created (LOOKUP, CREATE, ACCESS) need to be replaced. The NFSv4.1 protocol defines an OPEN operation that is capable of atomically looking up, creating, and locking a file on the server. </t> <sectiontitle="Opensnumbered="true" toc="default"> <name>Opens and Byte-RangeLocks" >Locks</name> <t> It is assumed that manipulating a byte-range lock is rare when compared to READ and WRITE operations. It is also assumed that server restarts and network partitions are relatively rare. Therefore, it is important that the READ and WRITE operations have a lightweight mechanism to indicate if they possess a held lock. A LOCK operation contains the heavyweight information required to establish a byte-range lock and uniquely define the owner of the lock. </t> <section anchor="state-owner"title="State-Owner Definition" >numbered="true" toc="default"> <name>State-Owner Definition</name> <t> When opening a file or requesting a byte-range lock, the client must specify an identifier that represents the owner of the requested lock. This identifier is in the form of a state-owner, represented in the protocol by a state_owner4, a variable-length opaque array that, when concatenated with the current client ID, uniquely defines the owner of a lock managed by the client. This may be a thread ID, process ID, or other unique value. </t> <t> Owners of opens and owners of byte-range locks are separate entities and remain separate even if the same opaque arrays are used to designate owners of each. The protocol distinguishes between open-owners (represented by open_owner4 structures) and lock-owners (represented by lock_owner4 structures). </t> <t> Each open is associated with a specific open-owner while each byte-range lock is associated with a lock-owner and an open-owner, the latter being the open-owner associated with the open file under which the LOCK operation was done. Delegations and layouts, on the other hand, are not associated with a specific owner but are associated with the client as a whole (identified by a client ID). </t> </section><!-- "State-owner Definition" --><sectiontitle="Usenumbered="true" toc="default"> <name>Use of the Stateid andLocking" >Locking</name> <t> All READ, WRITE, and SETATTR operations contain a stateid. For the purposes of this section, SETATTR operations that change the size attribute of a file are treated as if they are writing the area between the old and new sizes (i.e., the byte-range truncated or added to the file by means of the SETATTR), even where SETATTR is not explicitly mentioned in the text. The stateid passed to one of these operations must be one that represents an open, a set of byte-range locks, or a delegation, or it may be a special stateid representing anonymous access or the special bypass stateid. </t> <t> If the state-owner performs a READ or WRITE operation in a situation in which it has established a byte-range lock or share reservation on the server (any OPEN constitutes a share reservation), the stateid (previously returned by the server) must be used to indicate what locks, including both byte-range locks and share reservations, are held by the state-owner. If no state is established by the client, either a byte-range lock or a share reservation, a special stateid for anonymous state (zero as the value for "other" and "seqid") is used. (See <xreftarget='special_stateid' />target="special_stateid" format="default"/> for a description of 'special' stateids in general.) Regardless of whether a stateid for anonymous state or a stateid returned by the server is used, if there is a conflicting share reservation or mandatory byte-range lock held on the file, the serverMUST<bcp14>MUST</bcp14> refuse to service the READ or WRITE operation. </t> <t> Share reservations are established by OPEN operations and by their nature are mandatory in that when the OPEN denies READ or WRITE operations, that denial results in such operations being rejected with error NFS4ERR_LOCKED. Byte-range locks may be implemented by the server as either mandatory or advisory, or the choice of mandatory or advisory behavior may be determined by the server on the basis of the file being accessed (for example, some UNIX-based servers support a "mandatory lock bit" on the mode attribute such that if set, byte-range locks are required on the file before I/O is possible). When byte-range locks are advisory, they only prevent the granting of conflicting lock requests and have no effect on READs or WRITEs. Mandatory byte-range locks, however, prevent conflicting I/O operations. When they are attempted, they are rejected with NFS4ERR_LOCKED. When the client gets NFS4ERR_LOCKED on a file for which it knows it has the proper share reservation, it will need to send a LOCK operation on the byte-range of the file that includes the byte-range the I/O was to be performed on, with an appropriate locktype field of the LOCK operation's arguments (i.e., READ*_LT for a READ operation, WRITE*_LT for a WRITE operation). </t> <t> Note that for UNIX environments that support mandatory byte-range locking, the distinction between advisory and mandatory locking is subtle. In fact, advisory and mandatory byte-range locks are exactly the same as far as the APIs and requirements on implementation. If the mandatory lock attribute is set on the file, the server checks to see if the lock-owner has an appropriate shared (READ_LT) or exclusive (WRITE_LT) byte-range lock on the byte-range it wishes to READ from or WRITE to. If there is no appropriate lock, the server checks if there is a conflicting lock (which can be done by attempting to acquire the conflicting lock on behalf of the lock-owner, and if successful, release the lock after the READ or WRITE operation is done), and if there is, the server returns NFS4ERR_LOCKED. </t> <t> For Windows environments, byte-range locks are always mandatory, so the server always checks for byte-range locks during I/O requests. </t> <t> Thus, the LOCK operation does not need to distinguish between advisory and mandatory byte-range locks. It is the server's processing of the READ and WRITE operations that introduces the distinction. </t> <t> Every stateid that is validly passed to READ, WRITE, or SETATTR, with the exception of special stateid values, defines an access mode for the file (i.e., OPEN4_SHARE_ACCESS_READ, OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH).<list style='symbols'> <t></t> <ul spacing="normal"> <li> For stateids associated with opens, this is the mode defined by the original OPEN that caused the allocation of the OPEN stateid and as modified by subsequent OPENs and OPEN_DOWNGRADEs for the same open-owner/file pair.</t> <t></li> <li> For stateids returned by byte-range LOCK operations, the appropriate mode is the access mode for the OPEN stateid associated with the lock set represented by the stateid.</t> <t></li> <li> For delegation stateids, the access mode is based on the type of delegation.</t> </list> </t></li> </ul> <t> When a READ, WRITE, or SETATTR (that specifies the size attribute) operation is done, the operation is subject to checking against the access mode to verify that the operation is appropriate given the stateid with which the operation is associated. </t> <t> In the case of WRITE-type operations (i.e., WRITEs and SETATTRs that set size), the serverMUST<bcp14>MUST</bcp14> verify that the access mode allows writing andMUST<bcp14>MUST</bcp14> return an NFS4ERR_OPENMODE error if it does not. In the case of READ, the server may perform the corresponding check on the access mode, or it may choose to allow READ on OPENs for OPEN4_SHARE_ACCESS_WRITE, to accommodate clients whose WRITE implementation may unavoidably do reads (e.g., due to buffer cache constraints). However, even if READs are allowed in these circumstances, the serverMUST<bcp14>MUST</bcp14> still check for locks that conflict with the READ (e.g., another OPEN specified OPEN4_SHARE_DENY_READ or OPEN4_SHARE_DENY_BOTH). Note that a server that does enforce the access mode check on READs need not explicitly check for conflicting share reservations since the existence of OPEN for OPEN4_SHARE_ACCESS_READ guarantees that no conflicting share reservation can exist. </t> <t> The READ bypass special stateid (all bits of "other" and "seqid" set to one) indicates a desire to bypass locking checks. The serverMAY<bcp14>MAY</bcp14> allow READ operations to bypass locking checks at the server, when this special stateid is used. However, WRITE operations with this special stateid valueMUST NOT<bcp14>MUST NOT</bcp14> bypass locking checks and are treated exactly the same as if a special stateid for anonymous state were used. </t> <t> A lock may not be granted while a READ or WRITE operation using one of the special stateids is being performed and the scope of the lock to be granted would conflict with the READ or WRITE operation. This can occur when:<list style='symbols'> <t></t> <ul spacing="normal"> <li> A mandatory byte-range lock is requested with a byte-range that conflicts with the byte-range of the READ or WRITE operation. For the purposes of this paragraph, a conflict occurs when a shared lock is requested and a WRITE operation is being performed, or an exclusive lock is requested and either a READ or a WRITE operation is being performed.</t> <t></li> <li> A share reservation is requested that denies reading and/or writing and the corresponding operation is being performed.</t> <t></li> <li> A delegation is to be granted and the delegation type would prevent the I/O operation, i.e., READ and WRITE conflict with an OPEN_DELEGATE_WRITE delegation and WRITE conflicts with an OPEN_DELEGATE_READ delegation.</t> </list> </t></li> </ul> <t> When a client holds a delegation, it needs to ensure that the stateid sent conveys the association of operation with the delegation, to avoid the delegation from being avoidably recalled. When the delegation stateid, a stateid open associated with that delegation, or a stateid representing byte-range locks derived from such an open is used, the server knows that the READ, WRITE, or SETATTR does not conflict with the delegation but is sent under the aegis of the delegation. Even though it is possible for the server to determine from the client ID (via the session ID) that the client does in fact have a delegation, the server is not obliged to check this, so using a special stateid can result in avoidable recall of the delegation. </t> </section><!-- "Use of the Stateid and Locking" --></section><!-- "Opens and Byte-Range Locks" --><sectiontitle="Lock Ranges" >numbered="true" toc="default"> <name>Lock Ranges</name> <t> The protocol allows a lock-owner to request a lock with a byte-range and then either upgrade, downgrade, or unlock a sub-range of the initial lock, or a byte-range that overlaps -- fully or partially -- either with that initial lock or a combination of a set of existing locks for the same lock-owner. It is expected that this will be an uncommon type of request. In any case, servers or server file systems may not be able to support sub-range lock semantics. In the event that a server receives a locking request that represents a sub-range of current locking state for the lock-owner, the server is allowed to return the error NFS4ERR_LOCK_RANGE to signify that it does not support sub-range lock operations. Therefore, the client should be prepared to receive this error and, if appropriate, report the error to the requesting application. </t> <t> The client is discouraged from combining multiple independent locking ranges that happen to be adjacent into a single request since the server may not support sub-range requests for reasons related to the recovery of byte-range locking state in the event of server failure. As discussed in <xref target="server_failure"/>,format="default"/>, the server may employ certain optimizations during recovery that work effectively only when the client's behavior during lock recovery is similar to the client's locking behavior prior to server failure. </t> </section><!-- "Lock Ranges" --><sectiontitle="Upgradingnumbered="true" toc="default"> <name>Upgrading and DowngradingLocks" >Locks</name> <t> If a client has a WRITE_LT lock on a byte-range, it can request an atomic downgrade of the lock to a READ_LT lock via the LOCK operation, by setting the type to READ_LT. If the server supports atomic downgrade, the request will succeed. If not, it will return NFS4ERR_LOCK_NOTSUPP. The client should be prepared to receive this error and, if appropriate, report the error to the requesting application. </t> <t> If a client has a READ_LT lock on a byte-range, it can request an atomic upgrade of the lock to a WRITE_LT lock via the LOCK operation by setting the type to WRITE_LT or WRITEW_LT. If the server does not support atomic upgrade, it will return NFS4ERR_LOCK_NOTSUPP. If the upgrade can be achieved without an existing conflict, the request will succeed. Otherwise, the server will return either NFS4ERR_DENIED or NFS4ERR_DEADLOCK. The error NFS4ERR_DEADLOCK is returned if the client sent the LOCK operation with the type set to WRITEW_LT and the server has detected a deadlock. The client should be prepared to receive such errors and, if appropriate, report the error to the requesting application. </t> </section><!-- "Upgrading and Downgrading Locks" --><sectiontitle="Stateidanchor="byte_range_seqid" numbered="true" toc="default"> <name>Stateid Seqid Values and Byte-RangeLocks" anchor="byte_range_seqid" >Locks</name> <t> When a LOCK or LOCKU operation is performed, the stateid returned has the same "other" value as the argument's stateid, and a "seqid" value that is incremented (relative to the argument's stateid) to reflect the occurrence of the LOCK or LOCKU operation. The serverMUST<bcp14>MUST</bcp14> increment the value of the "seqid" field whenever there is any change to the locking status of any byte offset as described by any of the locks covered by the stateid. A change in locking status includes a change from locked to unlocked or the reverse or a change from being locked for READ_LT to being locked for WRITE_LT or the reverse. </t> <t> When there is no such change, as, for example, when a range already locked for WRITE_LT is locked again for WRITE_LT, the serverMAY<bcp14>MAY</bcp14> increment the "seqid" value. </t> </section><!-- "Stateid Sequence Values and Byte-Range Locks" --><sectiontitle="Issuesanchor="multiple_openowners" numbered="true" toc="default"> <name>Issues with MultipleOpen-Owners" anchor="multiple_openowners" >Open-Owners</name> <t> When the same file is opened by multiple open-owners, a client will have multiple OPEN stateids for that file, each associated with a different open-owner. In that case, there can be multiple LOCK and LOCKU requests for the same lock-owner sent using the different OPEN stateids, and so a situation may arise in which there are multiple stateids, each representing byte-range locks on the same file and held by the same lock-owner but each associated with a different open-owner. </t> <t> In such a situation, the locking status of each byte (i.e., whether it is locked, the READ_LT or WRITE_LT type of the lock, and the lock-owner holding the lock)MUST<bcp14>MUST</bcp14> reflect the last LOCK or LOCKU operation done for the lock-owner in question, independent of the stateid through which the request was sent. </t> <t> When a byte is locked by the lock-owner in question, the open-owner to which that byte-range lock is assignedSHOULD<bcp14>SHOULD</bcp14> be that of the open-owner associated with the stateid through which the last LOCK of that byte was done. When there is a change in the open-owner associated with locks for the stateid through which a LOCK or LOCKU was done, the "seqid" field of the stateidMUST<bcp14>MUST</bcp14> be incremented, even if the locking, in terms of lock-owners has not changed. When there is a change to the set of locked bytes associated with a different stateid for the same lock-owner, i.e., associated with a different open-owner, the "seqid" value for that stateidMUST NOT<bcp14>MUST NOT</bcp14> be incremented. </t> </section><!-- "Issues with Multiple Open-Owners" --><sectiontitle="Blocking Locks"anchor="blocking_locks">numbered="true" toc="default"> <name>Blocking Locks</name> <t> Some clients require the support of blocking locks. While NFSv4.1 provides a callback when a previously unavailable lock becomes available, this is anOPTIONAL<bcp14>OPTIONAL</bcp14> feature and clients cannot depend on its presence. Clients need to be prepared to continually poll for the lock. This presents a fairness problem. Two of the lock types, READW_LT and WRITEW_LT, are used to indicate to the server that the client is requesting a blocking lock. When the callback is not used, the server should maintain an ordered list of pending blocking locks. When the conflicting lock is released, the server may wait for the period of time equal to lease_time for the first waiting client to re-request the lock. After the lease period expires, the next waiting client request is allowed the lock. Clients are required to poll at an interval sufficiently small that it is likely to acquire the lock in a timely manner. The server is not required to maintain a list of pending blocked locks as it is used to increase fairness and not correct operation. Because of the unordered nature of crash recovery, storing of lock state to stable storage would be required to guarantee ordered granting of blocking locks. </t> <t> Servers may also note the lock types and delay returning denial of the request to allow extra time for a conflicting lock to be released, allowing a successful return. In this way, clients can avoid the burden of needless frequent polling for blocking locks. The server should take care in the length of delay in the event the client retransmits the request. </t> <t> If a server receives a blocking LOCK operation, denies it, and then later receives a nonblocking request for the same lock, which is also denied, then it should remove the lock in question from its list of pending blocking locks. Clients should use such a nonblocking request to indicate to the server that this is the last time they intend to poll for the lock, as may happen when the process requesting the lock is interrupted. This is a courtesy to the server, to prevent it from unnecessarily waiting a lease period before granting other LOCK operations. However, clients are not required to perform this courtesy, and servers must not depend on them doing so. Also, clients must be prepared for the possibility that this final locking request will be accepted. </t> <t> When a server indicates, via the flag OPEN4_RESULT_MAY_NOTIFY_LOCK, that CB_NOTIFY_LOCK callbacks might be done for the current open file, the client should take notice of this, but, since this is a hint, cannot rely on a CB_NOTIFY_LOCK always being done. A client may reasonably reduce the frequency with which it polls for a denied lock, since the greater latency that might occur is likely to be eliminated given a prompt callback, but it still needs to poll. When it receives a CB_NOTIFY_LOCK, it should promptly try to obtain the lock, but it should be aware that other clients may be polling and that the server is under no obligation to reserve the lock for that particular client. </t> </section><!-- title="Blocking Locks" --><section anchor="share_reserve"title="Share Reservations" >numbered="true" toc="default"> <name>Share Reservations</name> <t> A share reservation is a mechanism to control access to a file. It is a separate and independent mechanism from byte-range locking. When a client opens a file, it sends an OPEN operation to the server specifying the type of access required (READ, WRITE, or BOTH) and the type of access to deny others (OPEN4_SHARE_DENY_NONE, OPEN4_SHARE_DENY_READ, OPEN4_SHARE_DENY_WRITE, or OPEN4_SHARE_DENY_BOTH). If the OPEN fails, the client will fail the application's open request. </t> <t> Pseudo-code definition of the semantics: </t><figure> <artwork><sourcecode type="pseudocode"><![CDATA[ if (request.access == 0) { return (NFS4ERR_INVAL) } else { if ((request.access&& file_state.deny)) || (request.deny&& file_state.access)) { return (NFS4ERR_SHARE_DENIED) } return(NFS4ERR_OK); </artwork> </figure>(NFS4ERR_OK);]]></sourcecode> <t> When doing this checking of share reservations on OPEN, the current file_state used in the algorithm includes bits that reflect all current opens, including those for the open-owner making the new OPEN request. </t> <t> The constants used for the OPEN and OPEN_DOWNGRADE operations for the access and deny fields are as follows: </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ const OPEN4_SHARE_ACCESS_READ = 0x00000001; const OPEN4_SHARE_ACCESS_WRITE = 0x00000002; const OPEN4_SHARE_ACCESS_BOTH = 0x00000003; const OPEN4_SHARE_DENY_NONE = 0x00000000; const OPEN4_SHARE_DENY_READ = 0x00000001; const OPEN4_SHARE_DENY_WRITE = 0x00000002; const OPEN4_SHARE_DENY_BOTH =0x00000003; </artwork> </figure>0x00000003;]]></sourcecode> </section><!-- "Share Reservations" --><sectiontitle="OPEN/CLOSE Operations" >numbered="true" toc="default"> <name>OPEN/CLOSE Operations</name> <t> To provide correct share semantics, a clientMUST<bcp14>MUST</bcp14> use the OPEN operation to obtain the initial filehandle and indicate the desired access and what access, if any, to deny. Even if the client intends to use a special stateid for anonymous state or READ bypass, it must still obtain the filehandle for the regular file with the OPEN operation so the appropriate share semantics can be applied. Clients that do not have a deny mode built into their programming interfaces for opening a file should request a deny mode of OPEN4_SHARE_DENY_NONE. </t> <t> The OPEN operation with the CREATE flag also subsumes the CREATE operation for regular files as used in previous versions of the NFS protocol. This allows a create with a share to be done atomically. </t> <t> The CLOSE operation removes all share reservations held by the open-owner on that file. If byte-range locks are held, the clientSHOULD<bcp14>SHOULD</bcp14> release all locks before sending a CLOSE operation. The serverMAY<bcp14>MAY</bcp14> free all outstanding locks on CLOSE, but some servers may not support the CLOSE of a file that still has byte-range locks held. The serverMUST<bcp14>MUST</bcp14> return failure, NFS4ERR_LOCKS_HELD, if any locks would exist after the CLOSE. </t> <t> The LOOKUP operation will return a filehandle without establishing any lock state on the server. Without a valid stateid, the server will assume that the client has the least access. For example, if one client opened a file with OPEN4_SHARE_DENY_BOTH and another client accesses the file via a filehandle obtained through LOOKUP, the second client could only read the file using the special read bypass stateid. The second client could not WRITE the file at all because it would not have a valid stateid from OPEN and the special anonymous stateid would not be allowed access. </t> </section><!-- "OPEN/CLOSE Operations" --><sectiontitle="Openanchor="open_upgrade" numbered="true" toc="default"> <name>Open Upgrade andDowngrade" anchor="open_upgrade" >Downgrade</name> <t> When an OPEN is done for a file and the open-owner for which the OPEN is being done already has the file open, the result is to upgrade the open file status maintained on the server to include the access and deny bits specified by the new OPEN as well as those for the existing OPEN. The result is that there is one open file, as far as the protocol is concerned, and it includes the union of the access and deny bits for all of the OPEN requests completed. The OPEN is represented by a single stateid whose "other" value matches that of the original open, and whose "seqid" value is incremented to reflect the occurrence of the upgrade. The increment is required in cases in which the "upgrade" results in no change to the open mode (e.g., an OPEN is done for read when the existing open file is opened for OPEN4_SHARE_ACCESS_BOTH). Only a single CLOSE will be done to reset the effects of both OPENs. The client may use the stateid returned by the OPEN effecting the upgrade or with a stateid sharing the same "other" field and a seqid of zero, although care needs to be taken as far as upgrades that happen while the CLOSE is pending. Note that the client, when sending the OPEN, may not know that the same file is in fact being opened. The above only applies if both OPENs result in the OPENed object being designated by the same filehandle. </t> <t> When the server chooses to export multiple filehandles corresponding to the same file object and returns different filehandles on two different OPENs of the same file object, the serverMUST NOT<bcp14>MUST NOT</bcp14> "OR" together the access and deny bits and coalesce the two open files. Instead, the server must maintain separate OPENs with separate stateids and will require separate CLOSEs to free them. </t> <t> When multiple open files on the client are merged into a single OPEN file object on the server, the close of one of the open files (on the client) may necessitate change of the access and deny status of the open file on the server. This is because the union of the access and deny bits for the remaining opens may be smaller (i.e., a proper subset) than previously. The OPEN_DOWNGRADE operation is used to make the necessary change and the client should use it to update the server so that share reservation requests by other clients are handled properly. The stateid returned has the same "other" field as that passed to the server. The "seqid" value in the returned stateidMUST<bcp14>MUST</bcp14> be incremented, even in situations in which there is no change to the access and deny bits for the file. </t> </section><!-- "Open Upgrade and Downgrade" --><sectiontitle="Parallel OPENs" anchor="parallel_opens">anchor="parallel_opens" numbered="true" toc="default"> <name>Parallel OPENs</name> <t> Unlike the case of NFSv4.0, in which OPEN operations for the same open-owner are inherently serialized because of the owner-based seqid, multiple OPENs for the same open-owner may be done in parallel. When clients do this, they may encounter situations in which, because of the existence of hard links, two OPEN operations may turn out to open the same file, with a later OPEN performed being an upgrade of the first, with this fact only visible to the client once the operations complete. </t> <t> In this situation, clients may determine the order in which the OPENs were performed by examining the stateids returned by the OPENs. Stateids that share a common value of the "other" field can be recognized as having opened the same file, with the order of the operations determinable from the order of the "seqid" fields, mod any possible wraparound of the 32-bit field. </t> <t> When the possibility exists that the client will send multiple OPENs for the same open-owner in parallel, it may be the case that an open upgrade may happen without the client knowing beforehand that this could happen. Because of this possibility, CLOSEs and OPEN_DOWNGRADEs should generally be sent with a non-zero seqid in the stateid, to avoid the possibility that the status change associated with an open upgrade is not inadvertently lost. </t> </section><!-- "Parallel OPENs" --><sectiontitle="Reclaimanchor="open_br_reclaim" numbered="true" toc="default"> <name>Reclaim of Open and Byte-RangeLocks" anchor="open_br_reclaim">Locks</name> <t> Special forms of the LOCK and OPEN operations are provided when it is necessary to re-establish byte-range locks or opens after a server failure.<list style='symbols'> <t></t> <ul spacing="normal"> <li> To reclaim existing opens, an OPEN operation is performed using a CLAIM_PREVIOUS. Because the client, in this type of situation, will have already opened the file and have the filehandle of the target file, this operation requires that the current filehandle be the target file, rather than a directory, and no file name is specified.</t> <t></li> <li> To reclaim byte-range locks, a LOCK operation with the reclaim parameter set to true is used.</t> </list> </t></li> </ul> <t> Reclaims of opens associated with delegations are discussed in <xref target="delegation_recovery"/>.format="default"/>. </t> </section> </section><!-- "File Locking and Share Reservations" --> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Client-Side Caching" >numbered="true" toc="default"> <name>Client-Side Caching</name> <t> Client-side caching of data, of file attributes, and of file names is essential to providing good performance with the NFS protocol. Providing distributed cache coherence is a difficult problem, and previous versions of the NFS protocol have not attempted it. Instead, several NFS client implementation techniques have been used to reduce the problems that a lack of coherence poses for users. These techniques have not been clearly defined by earlier protocol specifications, and it is often unclear what is valid or invalid client behavior. </t> <t> The NFSv4.1 protocol uses many techniques similar to those that have been used in previous protocol versions. The NFSv4.1 protocol does not provide distributed cache coherence. However, it defines a more limited set of caching guarantees to allow locks and share reservations to be used without destructive interference from client-side caching. </t> <t> In addition, the NFSv4.1 protocol introduces a delegation mechanism, which allows many decisions normally made by the server to be made locally by clients. This mechanism provides efficient support of the common cases where sharing is infrequent or where sharing is read-only. </t> <sectiontitle="Performancenumbered="true" toc="default"> <name>Performance Challenges for Client-SideCaching" >Caching</name> <t> Caching techniques used in previous versions of the NFS protocol have been successful in providing good performance. However, several scalability challenges can arise when those techniques are used with very large numbers of clients. This is particularly true when clients are geographically distributed, which classically increases the latency for cache revalidation requests. </t> <t> The previous versions of the NFS protocol repeat their file data cache validation requests at the time the file is opened. This behavior can have serious performance drawbacks. A common case is one in which a file is only accessed by a single client. Therefore, sharing is infrequent. </t> <t> In this case, repeated references to the server to find that no conflicts exist are expensive. A better option with regards to performance is to allow a client that repeatedly opens a file to do so without reference to the server. This is done until potentially conflicting operations from another client actually occur. </t> <t> A similar situation arises in connection with byte-range locking. Sending LOCK and LOCKU operations as well as the READ and WRITE operations necessary to make data caching consistent with the locking semantics (see <xref target="dc_file_locking"/>)format="default"/>) can severely limit performance. When locking is used to provide protection against infrequent conflicts, a large penalty is incurred. This penalty may discourage the use of byte-range locking by applications. </t> <t> The NFSv4.1 protocol provides more aggressive caching strategies with the following design goals:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Compatibility with a large range of server semantics.</t> <t></li> <li> Providing the same caching benefits as previous versions of the NFS protocol when unable to support the more aggressive model.</t> <t></li> <li> Requirements for aggressive caching are organized so that a large portion of the benefit can be obtained even when not all of the requirements can be met.</t> </list> </t></li> </ul> <t> The appropriate requirements for the server are discussed in later sections in which specific forms of caching are covered (see <xref target="open_delegation"/>).format="default"/>). </t> </section> <sectiontitle="Delegation and Callbacks"anchor="deleg_and_cb">numbered="true" toc="default"> <name>Delegation and Callbacks</name> <t> Recallable delegation of server responsibilities for a file to a client improves performance by avoiding repeated requests to the server in the absence of inter-client conflict. With the use of a "callback" RPC from server to client, a server recalls delegated responsibilities when another client engages in sharing of a delegated file. </t> <t> A delegation is passed from the server to the client, specifying the object of the delegation and the type of delegation. There are different types of delegations, but each type contains a stateid to be used to represent the delegation when performing operations that depend on the delegation. This stateid is similar to those associated with locks and share reservations but differs in that the stateid for a delegation is associated with a client ID and may be used on behalf of all the open-owners for the given client. A delegation is made to the client as a whole and not to any specific process or thread of control within it. </t> <t> The backchannel is established by CREATE_SESSION and BIND_CONN_TO_SESSION, and the client is required to maintain it. Because the backchannel may be down, even temporarily, correct protocol operation does not depend on them. Preliminary testing of backchannel functionality by means of a CB_COMPOUND procedure with a single operation, CB_SEQUENCE, can be used to check the continuity of the backchannel. A server avoids delegating responsibilities until it has determined that the backchannel exists. Because the granting of a delegation is always conditional upon the absence of conflicting access, clientsMUST NOT<bcp14>MUST NOT</bcp14> assume that a delegation will be granted and theyMUST<bcp14>MUST</bcp14> always be prepared for OPENs, WANT_DELEGATIONs, and GET_DIR_DELEGATIONs to be processed without any delegations being granted. </t> <t> Unlike locks, an operation by a second client to a delegated file will cause the server to recall a delegation through a callback. For individual operations, we will describe, under IMPLEMENTATION, when such operations are required to effect a recall. A number of points should be noted, however.<list style="symbols"> <t></t> <ul spacing="normal"> <li> The server is free to recall a delegation whenever it feels it is desirable and may do so even if no operations requiring recall are being done.</t> <t></li> <li> Operations done outside the NFSv4.1 protocol, due to, for example, access by other protocols, or by local access, also need to result in delegation recall when they make analogous changes to file system data. What is crucial is if the change would invalidate the guarantees provided by the delegation. When this is possible, the delegation needs to be recalled andMUST<bcp14>MUST</bcp14> be returned or revoked before allowing the operation to proceed.</t> <t></li> <li> The semantics of the file system are crucial in defining when delegation recall is required. If a particular change within a specific implementation causes change to a file attribute, then delegation recall is required, whether that operation has been specifically listed as requiring delegation recall. Again, what is critical is whether the guarantees provided by the delegation are being invalidated.</t> </list> </t></li> </ul> <t> Despite those caveats, the implementation sections for a number of operations describe situations in which delegation recall would be required under some common circumstances:<list style="symbols"> <t></t> <ul spacing="normal"> <li> For GETATTR, see <xref target="OP_GETATTR_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For OPEN, see <xref target="OP_OPEN_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For READ, see <xref target="OP_READ_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For REMOVE, see <xref target="OP_REMOVE_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For RENAME, see <xref target="OP_RENAME_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For SETATTR, see <xref target="OP_SETATTR_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For WRITE, see <xref target="OP_WRITE_IMPLEMENTATION"/>. </t> </list> </t>format="default"/>. </li> </ul> <t> On recall, the client holding the delegation needs to flush modified state (such as modified data) to the server and return the delegation. The conflicting request will not be acted on until the recall is complete. The recall is considered complete when the client returns the delegation or the server times its wait for the delegation to be returned and revokes the delegation as a result of the timeout. In the interim, the server will either delay responding to conflicting requests or respond to them with NFS4ERR_DELAY. Following the resolution of the recall, the server has the information necessary to grant or deny the second client's request. </t> <t> At the time the client receives a delegation recall, it may have substantial state that needs to be flushed to the server. Therefore, the server should allow sufficient time for the delegation to be returned since it may involve numerous RPCs to the server. If the server is able to determine that the client is diligently flushing state to the server as a result of the recall, the server may extend the usual time allowed for a recall. However, the time allowed for recall completion should not be unbounded. </t> <t> An example of this is when responsibility to mediate opens on a given file is delegated to a client (see <xref target="open_delegation"/>).format="default"/>). The server will not know what opens are in effect on the client. Without this knowledge, the server will be unable to determine if the access and deny states for the file allow any particular open until the delegation for the file has been returned. </t> <t> A client failure or a network partition can result in failure to respond to a recall callback. In this case, the server will revoke the delegation, which in turn will render useless any modified state still on the client. </t> <sectiontitle="Delegation Recovery"anchor="delegation_recovery">numbered="true" toc="default"> <name>Delegation Recovery</name> <t> There are three situations that delegation recovery needs to deal with:<list style="symbols"> <t></t> <ul spacing="normal"> <li> client restart</t> <t></li> <li> server restart</t> <t></li> <li> network partition (full or backchannel-only)</t> </list> </t></li> </ul> <t> In the event the client restarts, the failure to renew the lease will result in the revocation of byte-range locks and share reservations. Delegations, however, may be treated a bit differently. </t> <t> There will be situations in which delegations will need to be re-established after a client restarts. The reason for this is that the client may have file data stored locally and this data was associated with the previously held delegations. The client will need to re-establish the appropriate file state on the server. </t> <t> To allow for this type of client recovery, the serverMAY<bcp14>MAY</bcp14> extend the period for delegation recovery beyond the typical lease expiration period. This implies that requests from other clients that conflict with these delegations will need to wait. Because the normal recall process may require significant time for the client to flush changed state to the server, other clients need be prepared for delays that occur because of a conflicting delegation. This longer interval would increase the window for clients to restart and consult stable storage so that the delegations can be reclaimed. For OPEN delegations, such delegations are reclaimed using OPEN with a claim type of CLAIM_DELEGATE_PREV or CLAIM_DELEG_PREV_FH (see Sections <xref target="data_caching_revocation"format="counter" />format="counter"/> and <xref target="OP_OPEN"format="counter" />format="counter"/> for discussion of OPEN delegation and the details of OPEN, respectively). </t> <t> A serverMAY<bcp14>MAY</bcp14> support claim types of CLAIM_DELEGATE_PREV and CLAIM_DELEG_PREV_FH, and if it does, itMUST NOT<bcp14>MUST NOT</bcp14> remove delegations upon a CREATE_SESSION that confirm a client ID created by EXCHANGE_ID. Instead, the serverMUST,<bcp14>MUST</bcp14>, for a period of time no less than that of the value of the lease_time attribute, maintain the client's delegations to allow time for the client to send CLAIM_DELEGATE_PREV and/or CLAIM_DELEG_PREV_FH requests. The server that supports CLAIM_DELEGATE_PREV and/or CLAIM_DELEG_PREV_FHMUST<bcp14>MUST</bcp14> support the DELEGPURGE operation. </t> <t> When the server restarts, delegations are reclaimed (using the OPEN operation with CLAIM_PREVIOUS) in a similar fashion to byte-range locks and share reservations. However, there is a slight semantic difference. In the normal case, if the server decides that a delegation should not be granted, it performs the requested action (e.g., OPEN) without granting any delegation. For reclaim, the server grants the delegation but a special designation is applied so that the client treats the delegation as having been granted but recalled by the server. Because of this, the client has the duty to write all modified state to the server and then return the delegation. This process of handling delegation reclaim reconciles three principles of the NFSv4.1 protocol:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Upon reclaim, a client reporting resources assigned to it by an earlier server instance must be granted those resources.</t> <t></li> <li> The server has unquestionable authority to determine whether delegations are to be granted and, once granted, whether they are to be continued.</t> <t></li> <li> The use of callbacks should not be depended upon until the client has proven its ability to receive them.</t> </list> </t></li> </ul> <t> When a client needs to reclaim a delegation and there is no associated open, the client may use the CLAIM_PREVIOUS variant of the WANT_DELEGATION operation. However, since the server is not required to support this operation, an alternative is to reclaim via a dummy OPEN together with the delegation using an OPEN of type CLAIM_PREVIOUS. The dummy open file can be released using a CLOSE to re-establish the original state to be reclaimed, a delegation without an associated open. </t> <t> When a client has more than a single open associated with a delegation, state for those additional opens can be established using OPEN operations of type CLAIM_DELEGATE_CUR. When these are used to establish opens associated with reclaimed delegations, the serverMUST<bcp14>MUST</bcp14> allow them when made within the grace period. </t> <t> When a network partition occurs, delegations are subject to freeing by the server when the lease renewal period expires. This is similar to the behavior for locks and share reservations. For delegations, however, the server may extend the period in which conflicting requests are held off. Eventually, the occurrence of a conflicting request from another client will cause revocation of the delegation. A loss of the backchannel (e.g., by later network configuration change) will have the same effect. A recall request will fail and revocation of the delegation will result. </t> <t> A client normally finds out about revocation of a delegation when it uses a stateid associated with a delegation and receives one of the errors NFS4ERR_EXPIRED, NFS4ERR_ADMIN_REVOKED, or NFS4ERR_DELEG_REVOKED. It also may find out about delegation revocation after a client restart when it attempts to reclaim a delegation and receives that same error. Note that in the case of a revoked OPEN_DELEGATE_WRITE delegation, there are issues because data may have been modified by the client whose delegation is revoked and separately by other clients. See <xref target="revocation_recovery_write"/>format="default"/> for a discussion of such issues. Note also that when delegations are revoked, information about the revoked delegation will be written by the server to stable storage (as described in <xref target="network_partitions_and_recovery"/>).format="default"/>). This is done to deal with the case in which a server restarts after revoking a delegation but before the client holding the revoked delegation is notified about the revocation. </t> </section> </section> <sectiontitle="Data Caching" >numbered="true" toc="default"> <name>Data Caching</name> <t> When applications share access to a set of files, they need to be implemented so as to take account of the possibility of conflicting access by another application. This is true whether the applications in question execute on different clients or reside on the same client. </t> <t> Share reservations and byte-range locks are the facilities the NFSv4.1 protocol provides to allow applications to coordinate access by using mutual exclusion facilities. The NFSv4.1 protocol's data caching must be implemented such that it does not invalidate the assumptions on which those using these facilities depend. </t> <sectiontitle="Datanumbered="true" toc="default"> <name>Data Caching andOPENs" >OPENs</name> <t> In order to avoid invalidating the sharing assumptions on which applications rely, NFSv4.1 clients should not provide cached data to applications or modify it on behalf of an application when it would not be valid to obtain or modify that same data via a READ or WRITE operation. </t> <t> Furthermore, in the absence of an OPEN delegation (see <xref target="open_delegation"/>),format="default"/>), two additional rules apply. Note that these rules are obeyed in practice by many NFSv3 clients.<list style='symbols'></t> <ul spacing="normal"> <li> <t> First, cached data present on a client must be revalidated after doing an OPEN. Revalidating means that the client fetches the change attribute from the server, compares it with the cached change attribute, and if different, declares the cached data (as well as the cached attributes) as invalid. This is to ensure that the data for the OPENed file is still correctly reflected in the client's cache. This validation must be done at least when the client's OPEN operation includes a deny of OPEN4_SHARE_DENY_WRITE or OPEN4_SHARE_DENY_BOTH, thus terminating a period in which other clients may have had the opportunity to open the file with OPEN4_SHARE_ACCESS_WRITE/OPEN4_SHARE_ACCESS_BOTH access. Clients may choose to do the revalidation more often (i.e., at OPENs specifying a deny mode of OPEN4_SHARE_DENY_NONE) to parallel the NFSv3 protocol's practice for the benefit of users assuming this degree of cache revalidation.<vspace blankLines='1' /></t> <t> Since the change attribute is updated for data and metadata modifications, some client implementors may be tempted to use the time_modify attribute and not the change attribute to validate cached data, so that metadata changes do not spuriously invalidate clean data. The implementor is cautioned in this approach. The change attribute is guaranteed to change for each update to the file, whereas time_modify is guaranteed to change only at the granularity of the time_delta attribute. Use by the client's data cache validation logic of time_modify and not change runs the risk of the client incorrectly marking stale data as valid. Thus, any cache validation approach by the clientMUST<bcp14>MUST</bcp14> include the use of the change attribute. </t><t></li> <li> Second, modified data must be flushed to the server before closing a file OPENed for OPEN4_SHARE_ACCESS_WRITE. This is complementary to the first rule. If the data is not flushed at CLOSE, the revalidation done after the client OPENs a file is unable to achieve its purpose. The other aspect to flushing the data before close is that the data must be committed to stable storage, at the server, before the CLOSE operation is requested by the client. In the case of a server restart and a CLOSEd file, it may not be possible to retransmit the data to be written to the file, hence, this requirement.</t> </list> </t></li> </ul> </section> <sectiontitle="Dataanchor="dc_file_locking" numbered="true" toc="default"> <name>Data Caching and FileLocking" anchor="dc_file_locking">Locking</name> <t> For those applications that choose to use byte-range locking instead of share reservations to exclude inconsistent file access, there is an analogous set of constraints that apply to client-side data caching. These rules are effective only if the byte-range locking is used in a way that matches in an equivalent way the actual READ and WRITE operations executed. This is as opposed to byte-range locking that is based on pure convention. For example, it is possible to manipulate a two-megabyte file by dividing the file into two one-megabyte ranges and protecting access to the two byte-ranges by byte-range locks on bytes zero and one. A WRITE_LT lock on byte zero of the file would represent the right to perform READ and WRITE operations on the first byte-range. A WRITE_LT lock on byte one of the file would represent the right to perform READ and WRITE operations on the second byte-range. As long as all applications manipulating the file obey this convention, they will work on a local file system. However, they may not work with the NFSv4.1 protocol unless clients refrain from data caching. </t> <t> The rules for data caching in the byte-range locking environment are:<list style='symbols'> <t></t> <ul spacing="normal"> <li> First, when a client obtains a byte-range lock for a particular byte-range, the data cache corresponding to that byte-range (if any cache data exists) must be revalidated. If the change attribute indicates that the file may have been updated since the cached data was obtained, the client must flush or invalidate the cached data for the newly locked byte-range. A client might choose to invalidate all of the non-modified cached data that it has for the file, but the only requirement for correct operation is to invalidate all of the data in the newly locked byte-range.</t> <t></li> <li> Second, before releasing a WRITE_LT lock for a byte-range, all modified data for that byte-range must be flushed to the server. The modified data must also be written to stable storage.</t> </list> </t></li> </ul> <t> Note that flushing data to the server and the invalidation of cached data must reflect the actual byte-ranges locked or unlocked. Rounding these up or down to reflect client cache block boundaries will cause problems if not carefully done. For example, writing a modified block when only half of that block is within an area being unlocked may cause invalid modification to the byte-range outside the unlocked area. This, in turn, may be part of a byte-range locked by another client. Clients can avoid this situation by synchronously performing portions of WRITE operations that overlap that portion (initial or final) that is not a full block. Similarly, invalidating a locked area that is not an integral number of full buffer blocks would require the client to read one or two partial blocks from the server if the revalidation procedure shows that the data that the client possesses may not be valid. </t> <t> The data that is written to the server as a prerequisite to the unlocking of a byte-range must be written, at the server, to stable storage. The client may accomplish this either with synchronous writes or by following asynchronous writes with a COMMIT operation. This is required because retransmission of the modified data after a server restart might conflict with a lock held by another client. </t> <t> A client implementation may choose to accommodate applications that use byte-range locking in non-standard ways (e.g., using a byte-range lock as a global semaphore) by flushing to the server more data upon a LOCKU than is covered by the locked range. This may include modified data within files other than the one for which the unlocks are being done. In such cases, the client must not interfere with applications whose READs and WRITEs are being done only within the bounds of byte-range locks that the application holds. For example, an application locks a single byte of a file and proceeds to write that single byte. A client that chose to handle a LOCKU by flushing all modified data to the server could validly write that single byte in response to an unrelated LOCKU operation. However, it would not be valid to write the entire block in which that single written byte was located since it includes an area that is not locked and might be locked by another client. Client implementations can avoid this problem by dividing files with modified data into those for which all modifications are done to areas covered by an appropriate byte-range lock and those for which there are modifications not covered by a byte-range lock. Any writes done for the former class of files must not include areas not locked and thus not modified on the client. </t> </section> <sectiontitle="Datanumbered="true" toc="default"> <name>Data Caching and Mandatory FileLocking" >Locking</name> <t> Client-side data caching needs to respect mandatory byte-range locking when it is in effect. The presence of mandatory byte-range locking for a given file is indicated when the client gets back NFS4ERR_LOCKED from a READ or WRITE operation on a file for which it has an appropriate share reservation. When mandatory locking is in effect for a file, the client must check for an appropriate byte-range lock for data being read or written. If a byte-range lock exists for the range being read or written, the client may satisfy the request using the client's validated cache. If an appropriate byte-range lock is not held for the range of the read or write, the read or write request must not be satisfied by the client's cache and the request must be sent to the server for processing. When a read or write request partially overlaps a locked byte-range, the request should be subdivided into multiple pieces with each byte-range (locked or not) treated appropriately. </t> </section> <section anchor="data_caching_and_file_identity"title="Datanumbered="true" toc="default"> <name>Data Caching and FileIdentity" >Identity</name> <t> When clients cache data, the file data needs to be organized according to the file system object to which the data belongs. For NFSv3 clients, the typical practice has been to assume for the purpose of caching that distinct filehandles represent distinct file system objects. The client then has the choice to organize and maintain the data cache on this basis. </t> <t> In the NFSv4.1 protocol, there is now the possibility to have significant deviations from a "one filehandle per object" model because a filehandle may be constructed on the basis of the object's pathname. Therefore, clients need a reliable method to determine if two filehandles designate the same file system object. If clients were simply to assume that all distinct filehandles denote distinct objects and proceed to do data caching on this basis, caching inconsistencies would arise between the distinct client-side objects that mapped to the same server-side object. </t> <t> By providing a method to differentiate filehandles, the NFSv4.1 protocol alleviates a potential functional regression in comparison with the NFSv3 protocol. Without this method, caching inconsistencies within the same client could occur, and this has not been present in previous versions of the NFS protocol. Note that it is possible to have such inconsistencies with applications executing on multiple clients, but that is not the issue being addressed here. </t> <t> For the purposes of data caching, the following steps allow an NFSv4.1 client to determine whether two distinct filehandles denote the same server-side object:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If GETATTR directed to two filehandles returns different values of the fsid attribute, then the filehandles represent distinct objects.</t> <t></li> <li> If GETATTR for any file with an fsid that matches the fsid of the two filehandles in question returns a unique_handles attribute with a value of TRUE, then the two objects are distinct.</t> <t></li> <li> If GETATTR directed to the two filehandles does not return the fileid attribute for both of the handles, then it cannot be determined whether the two objects are the same. Therefore, operations that depend on that knowledge (e.g., client-side data caching) cannot be done reliably. Note that if GETATTR does not return the fileid attribute for both filehandles, it will return it for neither of the filehandles, since the fsid for both filehandles is the same.</t> <t></li> <li> If GETATTR directed to the two filehandles returns different values for the fileid attribute, then they are distinct objects.</t> <t></li> <li> Otherwise, they are the same object.</t> </list> </t></li> </ul> </section> </section> <sectiontitle="Open Delegation"anchor="open_delegation">numbered="true" toc="default"> <name>Open Delegation</name> <t> When a file is being OPENed, the server may delegate further handling of opens and closes for that file to the opening client. Any such delegation is recallable since the circumstances that allowed for the delegation are subject to change. In particular, if the server receives a conflicting OPEN from another client, the server must recall the delegation before deciding whether the OPEN from the other client may be granted. Making a delegation is up to the server, and clients should not assume that any particular OPEN either will or will not result in an OPEN delegation. The following is a typical set of conditions that servers might use in deciding whether an OPEN should be delegated:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The client must be able to respond to the server's callback requests. If a backchannel has been established, the server will send a CB_COMPOUND request, containing a single operation, CB_SEQUENCE, for a test of backchannel availability.</t> <t></li> <li> The client must have responded properly to previous recalls.</t> <t></li> <li> There must be no current OPEN conflicting with the requested delegation.</t> <t></li> <li> There should be no current delegation that conflicts with the delegation being requested.</t> <t></li> <li> The probability of future conflicting open requests should be low based on the recent history of the file.</t> <t></li> <li> The existence of any server-specific semantics of OPEN/CLOSE that would make the required handling incompatible with the prescribed handling that the delegated client would apply (see below).</t> </list></li> </ul> <t> There are two types of OPEN delegations: OPEN_DELEGATE_READ and OPEN_DELEGATE_WRITE. An OPEN_DELEGATE_READ delegation allows a client to handle, on its own, requests to open a file for reading that do not deny OPEN4_SHARE_ACCESS_READ access to others. Multiple OPEN_DELEGATE_READ delegations may be outstanding simultaneously and do not conflict. An OPEN_DELEGATE_WRITE delegation allows the client to handle, on its own, all opens. Only one OPEN_DELEGATE_WRITE delegation may exist for a given file at a given time, and it is inconsistent with any OPEN_DELEGATE_READ delegations. </t> <t> When a client has an OPEN_DELEGATE_READ delegation, it is assured that neither the contents, the attributes (with the exception of time_access), nor the names of any links to the file will change without its knowledge, so long as the delegation is held. When a client has an OPEN_DELEGATE_WRITE delegation, it may modify the file data locally since no other client will be accessing the file's data. The client holding an OPEN_DELEGATE_WRITE delegation may only locally affect file attributes that are intimately connected with the file data: size, change, time_access, time_metadata, and time_modify. All other attributes must be reflected on the server. </t> <t> When a client has an OPEN delegation, it does not need to send OPENs or CLOSEs to the server. Instead, the client may update the appropriate status internally. For an OPEN_DELEGATE_READ delegation, opens that cannot be handled locally (opens that are for OPEN4_SHARE_ACCESS_WRITE/OPEN4_SHARE_ACCESS_BOTH or that deny OPEN4_SHARE_ACCESS_READ access) must be sent to the server. </t> <t> When an OPEN delegation is made, the reply to the OPEN contains an OPEN delegation structure that specifies the following:<list style="symbols"> <t></t> <ul spacing="normal"> <li> the type of delegation (OPEN_DELEGATE_READ or OPEN_DELEGATE_WRITE).</t> <t></li> <li> space limitation information to control flushing of data on close (OPEN_DELEGATE_WRITE delegation only; see <xref target="open_delegation_caching"/>) </t> <t>format="default"/>) </li> <li> an nfsace4 specifying read and write permissions</t> <t></li> <li> a stateid to represent the delegation</t> </list></li> </ul> <t> The delegation stateid is separate and distinct from the stateid for the OPEN proper. The standard stateid, unlike the delegation stateid, is associated with a particular lock-owner and will continue to be valid after the delegation is recalled and the file remains open. </t> <t> When a request internal to the client is made to open a file and an OPEN delegation is in effect, it will be accepted or rejected solely on the basis of the following conditions. Any requirement for other checks to be made by the delegate should result in the OPEN delegation being denied so that the checks can be made by the server itself.<list style="symbols"> <t></t> <ul spacing="normal"> <li> The access and deny bits for the request and the file as described in <xref target="share_reserve"/>. </t> <t>format="default"/>. </li> <li> The read and write permissions as determined below.</t> </list></li> </ul> <t> The nfsace4 passed with delegation can be used to avoid frequent ACCESS calls. The permission check should be as follows:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If the nfsace4 indicates that the open may be done, then it should be granted without reference to the server.</t> <t></li> <li> If the nfsace4 indicates that the open may not be done, then an ACCESS request must be sent to the server to obtain the definitive answer.</t> </list></li> </ul> <t> The server may return an nfsace4 that is more restrictive than the actual ACL of the file. This includes an nfsace4 that specifies denial of all access. Note that some common practices such as mapping the traditional user "root" to the user "nobody" (see <xreftarget="owner_owner_group"/>)target="owner_owner_group" format="default"/>) may make it incorrect to return the actual ACL of the file in the delegation response. </t> <t> The use of a delegation together with various other forms of caching creates the possibility that no server authentication and authorization will ever be performed for a given user since all of the user's requests might be satisfied locally. Where the client is depending on the server for authentication and authorization, the client should be sure authentication and authorization occurs for each user by use of the ACCESS operation. This should be the case even if an ACCESS operation would not be required otherwise. As mentioned before, the server may enforce frequent authentication by returning an nfsace4 denying all access with every OPEN delegation. </t> <sectiontitle="Openanchor="open_delegation_caching" numbered="true" toc="default"> <name>Open Delegation and DataCaching" anchor="open_delegation_caching" >Caching</name> <t> An OPEN delegation allows much of the message overhead associated with the opening and closing files to be eliminated. An open when an OPEN delegation is in effect does not require that a validation message be sent to the server. The continued endurance of the "OPEN_DELEGATE_READ delegation" provides a guarantee that no OPEN for OPEN4_SHARE_ACCESS_WRITE/OPEN4_SHARE_ACCESS_BOTH, and thus no write, has occurred. Similarly, when closing a file opened for OPEN4_SHARE_ACCESS_WRITE/OPEN4_SHARE_ACCESS_BOTH and if an OPEN_DELEGATE_WRITE delegation is in effect, the data written does not have to be written to the server until the OPEN delegation is recalled. The continued endurance of the OPEN delegation provides a guarantee that no open, and thus no READ or WRITE, has been done by another client. </t> <t> For the purposes of OPEN delegation, READs and WRITEs done without an OPEN are treated as the functional equivalents of a corresponding type of OPEN. Although a clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> use special stateids when an open exists, delegation handling on the server can use the client ID associated with the current session to determine if the operation has been done by the holder of the delegation (in which case, no recall is necessary) or by another client (in which case, the delegation must be recalled and I/O not proceed until the delegation is returned or revoked). </t> <t> With delegations, a client is able to avoid writing data to the server when the CLOSE of a file is serviced. The file close system call is the usual point at which the client is notified of a lack of stable storage for the modified file data generated by the application. At the close, file data is written to the server and, through normal accounting, the server is able to determine if the available file system space for the data has been exceeded (i.e., the server returns NFS4ERR_NOSPC or NFS4ERR_DQUOT). This accounting includes quotas. The introduction of delegations requires that an alternative method be in place for the same type of communication to occur between client and server. </t> <t> In the delegation response, the server provides either the limit of the size of the file or the number of modified blocks and associated block size. The server must ensure that the client will be able to write modified data to the server of a size equal to that provided in the original delegation. The server must make this assurance for all outstanding delegations. Therefore, the server must be careful in its management of available space for new or modified data, taking into account available file system space and any applicable quotas. The server can recall delegations as a result of managing the available file system space. The client should abide by the server's state space limits for delegations. If the client exceeds the stated limits for the delegation, the server's behavior is undefined. </t> <t> Based on server conditions, quotas, or available file system space, the server may grant OPEN_DELEGATE_WRITE delegations with very restrictive space limitations. The limitations may be defined in a way that will always force modified data to be flushed to the server on close. </t> <t> With respect to authentication, flushing modified data to the server after a CLOSE has occurred may be problematic. For example, the user of the application may have logged off the client, and unexpired authentication credentials may not be present. In this case, the client may need to take special care to ensure that local unexpired credentials will in fact be available. This may be accomplished by tracking the expiration time of credentials and flushing data well in advance of their expiration or by making private copies of credentials to assure their availability when needed. </t> </section> <sectiontitle="Opennumbered="true" toc="default"> <name>Open Delegation and FileLocks" >Locks</name> <t> When a client holds an OPEN_DELEGATE_WRITE delegation, lock operations are performed locally. This includes those required for mandatory byte-range locking. This can be done since the delegation implies that there can be no conflicting locks. Similarly, all of the revalidations that would normally be associated with obtaining locks and the flushing of data associated with the releasing of locks need not be done. </t> <t> When a client holds an OPEN_DELEGATE_READ delegation, lock operations are not performed locally. All lock operations, including those requesting non-exclusive locks, are sent to the server for resolution. </t> </section> <section anchor="handling_cb_getattr"title="Handlingnumbered="true" toc="default"> <name>Handling ofCB_GETATTR" >CB_GETATTR</name> <t> The server needs to employ special handling for a GETATTR where the target is a file that has an OPEN_DELEGATE_WRITE delegation in effect. The reason for this is that the client holding the OPEN_DELEGATE_WRITE delegation may have modified the data, and the server needs to reflect this change to the second client that submitted the GETATTR. Therefore, the client holding the OPEN_DELEGATE_WRITE delegation needs to be interrogated. The server will use the CB_GETATTR operation. The only attributes that the server can reliably query via CB_GETATTR are size and change. </t> <t> Since CB_GETATTR is being used to satisfy another client's GETATTR request, the server only needs to know if the client holding the delegation has a modified version of the file. If the client's copy of the delegated file is not modified (data or size), the server can satisfy the second client's GETATTR request from the attributes stored locally at the server. If the file is modified, the server only needs to know about this modified state. If the server determines that the file is currently modified, it will respond to the second client's GETATTR as if the file had been modified locally at the server. </t> <t> Since the form of the change attribute is determined by the server and is opaque to the client, the client and server need to agree on a method of communicating the modified state of the file. For the size attribute, the client will report its current view of the file size. For the change attribute, the handling is more involved. </t> <t> For the client, the following steps will be taken when receiving an OPEN_DELEGATE_WRITE delegation:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The value of the change attribute will be obtained from the server and cached. Let this value be represented by c.</t> <t></li> <li> The client will create a value greater than c that will be used for communicating that modified data is held at the client. Let this value be represented by d.</t> <t></li> <li> When the client is queried via CB_GETATTR for the change attribute, it checks to see if it holds modified data. If the file is modified, the value d is returned for the change attribute value. If this file is not currently modified, the client returns the value c for the change attribute.</t> </list></li> </ul> <t> For simplicity of implementation, the clientMAY<bcp14>MAY</bcp14> for each CB_GETATTR return the same value d. This is true even if, between successive CB_GETATTR operations, the client again modifies the file's data or metadata in its cache. The client can return the same value because the only requirement is that the client be able to indicate to the server that the client holds modified data. Therefore, the value of d may always be c + 1. </t> <t> While the change attribute is opaque to the client in the sense that it has no idea what units of time, if any, the server is counting change with, it is not opaque in that the client has to treat it as an unsigned integer, and the server has to be able to see the results of the client's changes to that integer. Therefore, the serverMUST<bcp14>MUST</bcp14> encode the change attribute in network order when sending it to the client. The clientMUST<bcp14>MUST</bcp14> decode it from network order to its native order when receiving it, and the clientMUST<bcp14>MUST</bcp14> encode it in network order when sending it to the server. For this reason, change is defined as an unsigned integer rather than an opaque array of bytes. </t> <t> For the server, the following steps will be taken when providing an OPEN_DELEGATE_WRITE delegation:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Upon providing an OPEN_DELEGATE_WRITE delegation, the server will cache a copy of the change attribute in the data structure it uses to record the delegation. Let this value be represented by sc.</t> <t></li> <li> When a second client sends a GETATTR operation on the same file to the server, the server obtains the change attribute from the first client. Let this value be cc.</t> <t></li> <li> If the value cc is equal to sc, the file is not modified and the server returns the current values for change, time_metadata, and time_modify (for example) to the second client.</t> <t></li> <li> If the value cc is NOT equal to sc, the file is currently modified at the first client and most likely will be modified at the server at a future time. The server then uses its current time to construct attribute values for time_metadata and time_modify. A new value of sc, which we will call nsc, is computed by the server, such that nsc>=>= sc + 1. The server then returns the constructed time_metadata, time_modify, and nsc values to the requester. The server replaces sc in the delegation record with nsc. To prevent the possibility of time_modify, time_metadata, and change from appearing to go backward (which would happen if the client holding the delegation fails to write its modified data to the server before the delegation is revoked or returned), the serverSHOULD<bcp14>SHOULD</bcp14> update the file's metadata record with the constructed attribute values. For reasons of reasonable performance, committing the constructed attribute values to stable storage isOPTIONAL. </t> </list> </t><bcp14>OPTIONAL</bcp14>. </li> </ul> <t> As discussed earlier in this section, the clientMAY<bcp14>MAY</bcp14> return the same cc value on subsequent CB_GETATTR calls, even if the file was modified in the client's cache yet again between successive CB_GETATTR calls. Therefore, the server must assume that the file has been modified yet again, andMUST<bcp14>MUST</bcp14> take care to ensure that the new nsc it constructs and returns is greater than the previous nsc it returned. An example implementation's delegation record would satisfy this mandate by including a boolean field (let us call it "modified") that is set to FALSE when the delegation is granted, and an sc value set at the time of grant to the change attribute value. The modified field would be set to TRUE the first time cc != sc, and would stay TRUE until the delegation is returned or revoked. The processing for constructing nsc, time_modify, and time_metadata would use this pseudo code:<figure> <artwork></t> <sourcecode type="pseudocode"><![CDATA[ if (!modified) { do CB_GETATTR for change and size; if (cc != sc) modified = TRUE; } else { do CB_GETATTR for size; } if (modified) { sc = sc + 1; time_modify = time_metadata = current_time; update sc, time_modify, time_metadata into file's metadata;} </artwork> </figure>}]]></sourcecode> <t> This would return to the client (that sent GETATTR) the attributes it requested, but make sure size comes from what CB_GETATTR returned. The server would not update the file's metadata with the client's modified size. </t> <t> In the case that the file attribute size is different than the server's current value, the server treats this as a modification regardless of the value of the change attribute retrieved via CB_GETATTR and responds to the second client as in the last step. </t> <t> This methodology resolves issues of clock differences between client and server and other scenarios where the use of CB_GETATTR break down. </t> <t> It should be noted that the server is under no obligation to use CB_GETATTR, and therefore the serverMAY<bcp14>MAY</bcp14> simply recall the delegation to avoid its use. </t> </section> <sectiontitle="Recallnumbered="true" toc="default"> <name>Recall of OpenDelegation" >Delegation</name> <t> The following events necessitate recall of an OPEN delegation:<list style="symbols"> <t></t> <ul spacing="normal"> <li> potentially conflicting OPEN request (or a READ or WRITE operation done with a special stateid)</t> <t></li> <li> SETATTR sent by another client</t> <t></li> <li> REMOVE request for the file</t> <t></li> <li> RENAME request for the file as either the source or target of the RENAME</t> </list></li> </ul> <t> Whether a RENAME of a directory in the path leading to the file results in recall of an OPEN delegation depends on the semantics of the server's file system. If that file system denies such RENAMEs when a file is open, the recall must be performed to determine whether the file in question is, in fact, open. </t> <t> In addition to the situations above, the server may choose to recall OPEN delegations at any time if resource constraints make it advisable to do so. Clients should always be prepared for the possibility of recall. </t> <t> When a client receives a recall for an OPEN delegation, it needs to update state on the server before returning the delegation. These same updates must be done whenever a client chooses to return a delegation voluntarily. The following items of state need to be dealt with:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If the file associated with the delegation is no longer open and no previous CLOSE operation has been sent to the server, a CLOSE operation must be sent to the server.</t> <t></li> <li> If a file has other open references at the client, then OPEN operations must be sent to the server. The appropriate stateids will be provided by the server for subsequent use by the client since the delegation stateid will no longer be valid. These OPEN requests are done with the claim type of CLAIM_DELEGATE_CUR. This will allow the presentation of the delegation stateid so that the client can establish the appropriate rights to perform the OPEN.(see(See <xref target="OP_OPEN"/>,format="default"/>, which describes the OPEN operation, for details.)</t> <t></li> <li> If there are granted byte-range locks, the corresponding LOCK operations need to be performed. This applies to the OPEN_DELEGATE_WRITE delegation case only.</t> <t></li> <li> For an OPEN_DELEGATE_WRITE delegation, if at the time of recall the file is not open for OPEN4_SHARE_ACCESS_WRITE/OPEN4_SHARE_ACCESS_BOTH, all modified data for the file must be flushed to the server. If the delegation had not existed, the client would have done this data flush before the CLOSE operation.</t> <t></li> <li> For an OPEN_DELEGATE_WRITE delegation when a file is still open at the time of recall, any modified data for the file needs to be flushed to the server.</t> <t></li> <li> With the OPEN_DELEGATE_WRITE delegation in place, it is possible that the file was truncated during the duration of the delegation. For example, the truncation could have occurred as a result of an OPEN UNCHECKED with a size attribute value of zero. Therefore, if a truncation of the file has occurred and this operation has not been propagated to the server, the truncation must occur before any modified data is written to the server.</t> </list></li> </ul> <t> In the case of OPEN_DELEGATE_WRITE delegation, byte-range locking imposes some additional requirements. To precisely maintain the associated invariant, it is required to flush any modified data in any byte-range for which a WRITE_LT lock was released while the OPEN_DELEGATE_WRITE delegation was in effect. However, because the OPEN_DELEGATE_WRITE delegation implies no other locking by other clients, a simpler implementation is to flush all modified data for the file (as described just above) if any WRITE_LT lock has been released while the OPEN_DELEGATE_WRITE delegation was in effect. </t> <t> An implementation need not wait until delegation recall (or the decision to voluntarily return a delegation) to perform any of the above actions, if implementation considerations (e.g., resource availability constraints) make that desirable. Generally, however, the fact that the actual OPEN state of the file may continue to change makes it not worthwhile to send information about opens and closes to the server, except as part of delegation return. An exception is when the client has no more internal opens of the file. In this case, sending a CLOSE is useful because it reduces resource utilization on the client and server. Regardless of the client's choices on scheduling these actions, all must be performed before the delegation is returned, including (when applicable) the close that corresponds to the OPEN that resulted in the delegation. These actions can be performed either in previous requests or in previous operations in the same COMPOUND request. </t> </section> <sectiontitle="Clientsnumbered="true" toc="default"> <name>Clients That Fail to Honor DelegationRecalls" >Recalls</name> <t> A client may fail to respond to a recall for various reasons, such as a failure of the backchannel from server to the client. The client may be unaware of a failure in the backchannel. This lack of awareness could result in the client finding out long after the failure that its delegation has been revoked, and another client has modified the data for which the client had a delegation. This is especially a problem for the client that held an OPEN_DELEGATE_WRITE delegation. </t> <t> Status bits returned by SEQUENCE operations help to provide an alternate way of informing the client of issues regarding the status of the backchannel and of recalled delegations. When the backchannel is not available, the server returns the status bit SEQ4_STATUS_CB_PATH_DOWN on SEQUENCE operations. The client can react by attempting to re-establish the backchannel and by returning recallable objects if a backchannel cannot be successfully re-established. </t> <t> Whether the backchannel is functioning or not, it may be that the recalled delegation is not returned. Note that the client's lease might still be renewed, even though the recalled delegation is not returned. In this situation, serversSHOULD<bcp14>SHOULD</bcp14> revoke delegations that are not returned in a period of time equal to the lease period. This period of time should allow the client time to note the backchannel-down status and re-establish the backchannel. </t> <t> When delegations are revoked, the server will return with the SEQ4_STATUS_RECALLABLE_STATE_REVOKED status bit set on subsequent SEQUENCE operations. The client should note this and then use TEST_STATEID to find which delegations have been revoked. </t> </section> <sectiontitle="Delegation Revocation" >numbered="true" toc="default"> <name>Delegation Revocation</name> <t> At the point a delegation is revoked, if there are associated opens on the client, these opens may or may not be revoked. If no byte-range lock or open is granted that is inconsistent with the existing open, the stateid for the open may remain valid and be disconnected from the revoked delegation, just as would be the case if the delegation were returned. </t> <t> For example, if an OPEN for OPEN4_SHARE_ACCESS_BOTH with a deny of OPEN4_SHARE_DENY_NONE is associated with the delegation, granting of another such OPEN to a different client will revoke the delegation but need not revoke the OPEN, since the two OPENs are consistent with each other. On the other hand, if an OPEN denying write access is granted, then the existing OPEN must be revoked. </t> <t> When opens and/or locks are revoked, the applications holding these opens or locks need to be notified. This notification usually occurs by returning errors for READ/WRITE operations or when a close is attempted for the open file. </t> <t> If no opens exist for the file at the point the delegation is revoked, then notification of the revocation is unnecessary. However, if there is modified data present at the client for the file, the user of the application should be notified. Unfortunately, it may not be possible to notify the user since active applications may not be present at the client. See <xref target="revocation_recovery_write"/>format="default"/> for additional details. </t> </section> <sectiontitle="Delegations via WANT_DELEGATION"anchor="via_want_delegation">numbered="true" toc="default"> <name>Delegations via WANT_DELEGATION</name> <t> In addition to providing delegations as part of the reply to OPEN operations, serversMAY<bcp14>MAY</bcp14> provide delegations separate from open, via theOPTIONAL<bcp14>OPTIONAL</bcp14> WANT_DELEGATION operation. This allows delegations to be obtained in advance of an OPEN that might benefit from them, for objects that are not a valid target of OPEN, or to deal with cases in which a delegation has been recalled and the client wants to make an attempt to re-establish it if the absence of use by other clients allows that. </t> <t> The WANT_DELEGATION operation may be performed on any type of file object other than a directory. </t> <t> When a delegation is obtained using WANT_DELEGATION, any open files for the same filehandle held by that client are to be treated as subordinate to the delegation, just as if they had been created using an OPEN of type CLAIM_DELEGATE_CUR. They are otherwise unchanged as to seqid, access and deny modes, and the relationship with byte-range locks. Similarly, because existing byte-range locks are subordinate to an open, those byte-range locks also become indirectly subordinate to that new delegation. </t> <t> The WANT_DELEGATION operation provides for delivery of delegations via callbacks, when the delegations are not immediately available. When a requested delegation is available, it is delivered to the client via a CB_PUSH_DELEG operation. When this happens, open files for the same filehandle become subordinate to the new delegation at the point at which the delegation is delivered, just as if they had been created using an OPEN of type CLAIM_DELEGATE_CUR. Similarly, this occurs for existing byte-range locks subordinate to an open. </t> </section> </section> <sectiontitle="Dataanchor="data_caching_revocation" numbered="true" toc="default"> <name>Data Caching andRevocation" anchor="data_caching_revocation" >Revocation</name> <t> When locks and delegations are revoked, the assumptions upon which successful caching depends are no longer guaranteed. For any locks or share reservations that have been revoked, the corresponding state-owner needs to be notified. This notification includes applications with a file open that has a corresponding delegation that has been revoked. Cached data associated with the revocation must be removed from the client. In the case of modified data existing in the client's cache, that data must be removed from the client without being written to the server. As mentioned, the assumptions made by the client are no longer valid at the point when a lock or delegation has been revoked. For example, another client may have been granted a conflicting byte-range lock after the revocation of the byte-range lock at the first client. Therefore, the data within the lock range may have been modified by the other client. Obviously, the first client is unable to guarantee to the application what has occurred to the file in the case of revocation. </t> <t> Notification to a state-owner will in many cases consist of simply returning an error on the next and all subsequent READs/WRITEs to the open file or on the close. Where the methods available to a client make such notification impossible because errors for certain operations may not be returned, more drastic action such as signals or process termination may be appropriate. The justification here is that an invariant on which an application depends may be violated. Depending on how errors are typically treated for the client-operating environment, further levels of notification including logging, console messages, and GUI pop-ups may be appropriate. </t> <sectiontitle="Revocationanchor="revocation_recovery_write" numbered="true" toc="default"> <name>Revocation Recovery for Write OpenDelegation" anchor="revocation_recovery_write" >Delegation</name> <t> Revocation recovery for an OPEN_DELEGATE_WRITE delegation poses the special issue of modified data in the client cache while the file is not open. In this situation, any client that does not flush modified data to the server on each close must ensure that the user receives appropriate notification of the failure as a result of the revocation. Since such situations may require human action to correct problems, notification schemes in which the appropriate user or administrator is notified may be necessary. Logging and console messages are typical examples. </t> <t> If there is modified data on the client, it must not be flushed normally to the server. A client may attempt to provide a copy of the file data as modified during the delegation under a different name in the file system namespace to ease recovery. Note that when the client can determine that the file has not been modified by any other client, or when the client has a complete cached copy of the file in question, such a saved copy of the client's view of the file may be of particular value for recovery. In another case, recovery using a copy of the file based partially on the client's cached data and partially on the server's copy as modified by other clients will be anything but straightforward, so clients may avoid saving file contents in these situations or specially mark the results to warn users of possible problems. </t> <t> Saving of such modified data in delegation revocation situations may be limited to files of a certain size or might be used only when sufficient disk space is available within the target file system. Such saving may also be restricted to situations when the client has sufficient buffering resources to keep the cached copy available until it is properly stored to the target file system. </t> </section> </section> <sectiontitle="Attribute Caching" >numbered="true" toc="default"> <name>Attribute Caching</name> <t> This section pertains to the caching of a file's attributes on a client when that client does not hold a delegation on the file. </t> <t> The attributes discussed in this section do not include named attributes. Individual named attributes are analogous to files, and caching of the data for these needs to be handled just as data caching is for ordinary files. Similarly, LOOKUP results from an OPENATTR directory (as well as the directory's contents) are to be cached on the same basis as any other pathnames. </t> <t> Clients may cache file attributes obtained from the server and use them to avoid subsequent GETATTR requests. Such caching is write through in that modification to file attributes is always done by means of requests to the server and should not be done locally and should not be cached. The exception to this are modifications to attributes that are intimately connected with data caching. Therefore, extending a file by writing data to the local data cache is reflected immediately in the size as seen on the client without this change being immediately reflected on the server. Normally, such changes are not propagated directly to the server, but when the modified data is flushed to the server, analogous attribute changes are made on the server. When OPEN delegation is in effect, the modified attributes may be returned to the server in reaction to a CB_RECALL call. </t> <t> The result of local caching of attributes is that the attribute caches maintained on individual clients will not be coherent. Changes made in one order on the server may be seen in a different order on one client and in a third order on another client. </t> <t> The typical file system application programming interfaces do not provide means to atomically modify or interrogate attributes for multiple files at the same time. The following rules provide an environment where the potential incoherencies mentioned above can be reasonably managed. These rules are derived from the practice of previous NFS protocols.<list style="symbols"> <t></t> <ul spacing="normal"> <li> All attributes for a given file (per-fsid attributes excepted) are cached as a unit at the client so that no non-serializability can arise within the context of a single file.</t> <t></li> <li> An upper time boundary is maintained on how long a client cache entry can be kept without being refreshed from the server.</t> <t></li> <li> When operations are performed that change attributes at the server, the updated attribute set is requested as part of the containing RPC. This includes directory operations that update attributes indirectly. This is accomplished by following the modifying operation with a GETATTR operation and then using the results of the GETATTR to update the client's cached attributes.</t> </list></li> </ul> <t> Note that if the full set of attributes to be cached is requested by READDIR, the results can be cached by the client on the same basis as attributes obtained via GETATTR. </t> <t> A client may validate its cached version of attributes for a file by fetching both the change and time_access attributes and assuming that if the change attribute has the same value as it did when the attributes were cached, then no attributes other than time_access have changed. The reason why time_access is also fetched is because many servers operate in environments where the operation that updates change does not update time_access. For example, POSIX file semantics do not update access time when a file is modified by the write system call <xreftarget="write_atime"/>.target="write_atime" format="default"/>. Therefore, the client that wants a current time_access value should fetch it with change during the attribute cache validation processing and update its cached time_access. </t> <t> The client may maintain a cache of modified attributes for those attributes intimately connected with data of modified regular files (size, time_modify, and change). Other than those three attributes, the clientMUST NOT<bcp14>MUST NOT</bcp14> maintain a cache of modified attributes. Instead, attribute changes are immediately sent to the server. </t> <t> In some operating environments, the equivalent to time_access is expected to be implicitly updated by each read of the content of the file object. If an NFS client is caching the content of a file object, whether it is a regular file, directory, or symbolic link, the clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> update the time_access attribute (via SETATTR or a small READ or READDIR request) on the server with each read that is satisfied from cache. The reason is that this can defeat the performance benefits of caching content, especially since an explicit SETATTR of time_access may alter the change attribute on the server. If the change attribute changes, clients that are caching the content will think the content has changed, and will re-read unmodified data from the server. Nor is the client encouraged to maintain a modified version of time_access in its cache, since the client either would eventually have to write the access time to the server with bad performance effects or never update the server's time_access, thereby resulting in a situation where an application that caches access time between a close and open of the same file observes the access time oscillating between the past and present. The time_access attribute always means the time of last access to a file by a read that was satisfied by the server. This way clients will tend to see only time_access changes that go forward in time. </t> </section> <sectiontitle="Datanumbered="true" toc="default"> <name>Data and Metadata Caching and Memory MappedFiles" >Files</name> <t> Some operating environments include the capability for an application to map a file's content into the application's address space. Each time the application accesses a memory location that corresponds to a block that has not been loaded into the address space, a page fault occurs and the file is read (or if the block does not exist in the file, the block is allocated and then instantiated in the application's address space). </t> <t> As long as each memory-mapped access to the file requires a page fault, the relevant attributes of the file that are used to detect access and modification (time_access, time_metadata, time_modify, and change) will be updated. However, in many operating environments, when page faults are not required, these attributes will not be updated on reads or updates to the file via memory access (regardless of whether the file is local or is accessed remotely). A client or serverMAY<bcp14>MAY</bcp14> fail to update attributes of a file that is being accessed via memory-mapped I/O. This has several implications:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If there is an application on the server that has memory mapped a file that a client is also accessing, the client may not be able to get a consistent value of the change attribute to determine whether or not its cache is stale. A server that knows that the file is memory-mapped could always pessimistically return updated values for change so as to force the application to always get the most up-to-date data and metadata for the file. However, due to the negative performance implications of this, such behavior isOPTIONAL. </t> <t><bcp14>OPTIONAL</bcp14>. </li> <li> If the memory-mapped file is not being modified on the server, and instead is just being read by an application via the memory-mapped interface, the client will not see an updated time_access attribute. However, in many operating environments, neither will any process running on the server. Thus, NFS clients are at no disadvantage with respect to local processes.</t> <t></li> <li> If there is another client that is memory mapping the file, and if that client is holding an OPEN_DELEGATE_WRITE delegation, the same set of issues as discussed in the previous two bullet points apply. So, when a server does a CB_GETATTR to a file that the client has modified in its cache, the reply from CB_GETATTR will not necessarily be accurate. As discussed earlier, the client's obligation is to report that the file has been modified since the delegation was granted, not whether it has been modified again between successive CB_GETATTR calls, and the serverMUST<bcp14>MUST</bcp14> assume that any file the client has modified in cache has been modified again between successive CB_GETATTR calls. Depending on the nature of the client's memory management system, this weak obligation may not be possible. A clientMAY<bcp14>MAY</bcp14> return stale information in CB_GETATTR whenever the file is memory-mapped.</t></li> <li> <t> The mixture of memory mapping and byte-range locking on the same file is problematic. Consider the following scenario, where a page size on each client is 8192 bytes.<list style="symbols"> <t></t> <ul spacing="normal"> <li> Client A memory maps the first page (8192 bytes) of file X.</t> <t></li> <li> Client B memory maps the first page (8192 bytes) of file X.</t> <t></li> <li> Client A WRITE_LT locks the first 4096 bytes.</t> <t></li> <li> Client B WRITE_LT locks the second 4096 bytes.</t> <t></li> <li> Client A, via a STORE instruction, modifies part of its locked byte-range.</t> <t></li> <li> Simultaneous to client A, client B executes a STORE on part of its locked byte-range.</t> </list> </t> </list> </t></li> </ul> </li> </ul> <t> Here the challenge is for each client to resynchronize to get a correct view of the first page. In many operating environments, the virtual memory management systems on each client only know a page is modified, not that a subset of the page corresponding to the respective lock byte-ranges has been modified. So it is not possible for each client to do the right thing, which is to write to the server only that portion of the page that is locked. For example, if client A simply writes out the page, and then client B writes out the page, client A's data is lost. </t> <t> Moreover, if mandatory locking is enabled on the file, then we have a different problem. When clients A and B execute the STORE instructions, the resulting page faults require a byte-range lock on the entire page. Each client then tries to extend their locked range to the entire page, which results in a deadlock. Communicating the NFS4ERR_DEADLOCK error to a STORE instruction is difficult at best. </t> <t> If a client is locking the entire memory-mapped file, there is no problem with advisory or mandatory byte-range locking, at least until the client unlocks a byte-range in the middle of the file. </t> <t> Given the above issues, the following are permitted:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Clients and serversMAY<bcp14>MAY</bcp14> deny memory mapping a file for which they know there are byte-range locks.</t> <t></li> <li> Clients and serversMAY<bcp14>MAY</bcp14> deny a byte-range lock on a file they know is memory-mapped.</t> <t></li> <li> A clientMAY<bcp14>MAY</bcp14> deny memory mapping a file that it knows requires mandatory locking for I/O. If mandatory locking is enabled after the file is opened and mapped, the clientMAY<bcp14>MAY</bcp14> deny the application further access to its mapped file.</t> </list> </t></li> </ul> </section> <sectiontitle="Nameanchor="without_dir_deleg" numbered="true" toc="default"> <name>Name and Directory Caching without DirectoryDelegations" anchor="without_dir_deleg">Delegations</name> <t> The NFSv4.1 directory delegation facility (described in <xref target="dir_deleg"/>format="default"/> below) isOPTIONAL<bcp14>OPTIONAL</bcp14> for servers to implement. Even where it is implemented, it may not always be functional because of resource availability issues or other constraints. Thus, it is important to understand how name and directory caching are done in the absence of directory delegations. These topics are discussed in the next two subsections. </t> <section anchor="name_caching"title="Name Caching" >numbered="true" toc="default"> <name>Name Caching</name> <t> The results of LOOKUP and READDIR operations may be cached to avoid the cost of subsequent LOOKUP operations. Just as in the case of attribute caching, inconsistencies may arise among the various client caches. To mitigate the effects of these inconsistencies and given the context of typical file system APIs, an upper time boundary is maintained for how long a client name cache entry can be kept without verifying that the entry has not been made invalid by a directory change operation performed by another client. </t> <t> When a client is not making changes to a directory for which there exist name cache entries, the client needs to periodically fetch attributes for that directory to ensure that it is not being modified. After determining that no modification has occurred, the expiration time for the associated name cache entries may be updated to be the current time plus the name cache staleness bound. </t> <t> When a client is making changes to a given directory, it needs to determine whether there have been changes made to the directory by other clients. It does this by using the change attribute as reported before and after the directory operation in the associated change_info4 value returned for the operation. The server is able to communicate to the client whether the change_info4 data is provided atomically with respect to the directory operation. If the change values are provided atomically, the client has a basis for determining, given proper care, whether other clients are modifying the directory in question. </t> <t> The simplest way to enable the client to make this determination is for the client to serialize all changes made to a specific directory. When this is done, and the server provides before and after values of the change attribute atomically, the client can simply compare the after value of the change attribute from one operation on a directory with the before value on the subsequent operation modifying that directory. When these are equal, the client is assured that no other client is modifying the directory in question. </t> <t> When such serialization is not used, and there may be multiple simultaneous outstanding operations modifying a single directory sent from a single client, making this sort of determination can be more complicated. If two such operations complete in a different order than they were actually performed, that might give an appearance consistent with modification being made by another client. Where this appears to happen, the client needs to await the completion of all such modifications that were started previously, to see if the outstanding before and after change numbers can be sorted into a chain such that the before value of one change number matches the after value of a previous one, in a chain consistent with this client being the only one modifying the directory. </t> <t> In either of these cases, the client is able to determine whether the directory is being modified by another client. If the comparison indicates that the directory was updated by another client, the name cache associated with the modified directory is purged from the client. If the comparison indicates no modification, the name cache can be updated on the client to reflect the directory operation and the associated timeout can be extended. The post-operation change value needs to be saved as the basis for future change_info4 comparisons. </t> <t> As demonstrated by the scenario above, name caching requires that the client revalidate name cache data by inspecting the change attribute of a directory at the point when the name cache item was cached. This requires that the server update the change attribute for directories when the contents of the corresponding directory is modified. For a client to use the change_info4 information appropriately and correctly, the server must report the pre- and post-operation change attribute values atomically. When the server is unable to report the before and after values atomically with respect to the directory operation, the server must indicate that fact in the change_info4 return value. When the information is not atomically reported, the client should not assume that other clients have not changed the directory. </t> </section> <sectiontitle="Directory Caching" >numbered="true" toc="default"> <name>Directory Caching</name> <t> The results of READDIR operations may be used to avoid subsequent READDIR operations. Just as in the cases of attribute and name caching, inconsistencies may arise among the various client caches. To mitigate the effects of these inconsistencies, and given the context of typical file system APIs, the following rules should be followed:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Cached READDIR information for a directory that is not obtained in a single READDIR operation must always be a consistent snapshot of directory contents. This is determined by using a GETATTR before the first READDIR and after the last READDIR that contributes to the cache.</t> <t></li> <li> An upper time boundary is maintained to indicate the length of time a directory cache entry is considered valid before the client must revalidate the cached information.</t> </list></li> </ul> <t> The revalidation technique parallels that discussed in the case of name caching. When the client is not changing the directory in question, checking the change attribute of the directory with GETATTR is adequate. The lifetime of the cache entry can be extended at these checkpoints. When a client is modifying the directory, the client needs to use the change_info4 data to determine whether there are other clients modifying the directory. If it is determined that no other client modifications are occurring, the client may update its directory cache to reflect its own changes. </t> <t> As demonstrated previously, directory caching requires that the client revalidate directory cache data by inspecting the change attribute of a directory at the point when the directory was cached. This requires that the server update the change attribute for directories when the contents of the corresponding directory is modified. For a client to use the change_info4 information appropriately and correctly, the server must report the pre- and post-operation change attribute values atomically. When the server is unable to report the before and after values atomically with respect to the directory operation, the server must indicate that fact in the change_info4 return value. When the information is not atomically reported, the client should not assume that other clients have not changed the directory. </t> </section> </section> <sectiontitle="Directory Delegations" anchor="dir_deleg"> <section title="Introductionanchor="dir_deleg" numbered="true" toc="default"> <name>Directory Delegations</name> <section numbered="true" toc="default"> <name>Introduction to DirectoryDelegations">Delegations</name> <t> Directory caching for the NFSv4.1 protocol, as previously described, is similar to file caching in previous versions. Clients typically cache directory information for a duration determined by the client. At the end of a predefined timeout, the client will query the server to see if the directory has been updated. By caching attributes, clients reduce the number of GETATTR calls made to the server to validate attributes. Furthermore, frequently accessed files and directories, such as the current working directory, have their attributes cached on the client so that some NFS operations can be performed without having to make an RPC call. By caching name and inode information about most recently looked up entries in a Directory Name Lookup Cache (DNLC), clients do not need to send LOOKUP calls to the server every time these files are accessed. </t> <t> This caching approach works reasonably well at reducing network traffic in many environments. However, it does not address environments where there are numerous queries for files that do not exist. In these cases of "misses", the client sends requests to the server in order to provide reasonable application semantics and promptly detect the creation of new directory entries. Examples of high miss activity are compilation in software development environments. The current behavior of NFS limits its potential scalability and wide-area sharing effectiveness in these types of environments. Other distributed stateful file system architectures such as AFS and DFS have proven that adding state around directory contents can greatly reduce network traffic in high-miss environments. </t> <t> Delegation of directory contents is anOPTIONAL<bcp14>OPTIONAL</bcp14> feature of NFSv4.1. Directory delegations provide similar traffic reduction benefits as with file delegations. By allowing clients to cache directory contents (in a read-only fashion) while being notified of changes, the client can avoid making frequent requests to interrogate the contents of slowly-changing directories, reducing network traffic and improving client performance. It can also simplify the task of determining whether other clients are making changes to the directory when the client itself is making many changes to the directory and changes are not serialized. </t> <t> Directory delegations allow improved namespace cache consistency to be achieved through delegations and synchronous recalls, in the absence of notifications. In addition, if time-based consistency is sufficient, asynchronous notifications can provide performance benefits for the client, and possibly the server, under some common operating conditions such as slowly-changing and/or very large directories. </t> </section> <sectiontitle="Directorynumbered="true" toc="default"> <name>Directory DelegationDesign">Design</name> <t> NFSv4.1 introduces the GET_DIR_DELEGATION (<xref target="OP_GET_DIR_DELEGATION"/>)format="default"/>) operation to allow the client to ask for a directory delegation. The delegation covers directory attributes and all entries in the directory. If either of these change, the delegation will be recalled synchronously. The operation causing the recall will have to wait before the recall is complete. Any changes to directory entry attributes will not cause the delegation to be recalled. </t> <t> In addition to asking for delegations, a client can also ask for notifications for certain events. These events include changes to the directory's attributes and/or its contents. If a client asks for notification for a certain event, the server will notify the client when that event occurs. This will not result in the delegation being recalled for that client. The notifications are asynchronous and provide a way of avoiding recalls in situations where a directory is changing enough that the pure recall model may not be effective while trying to allow the client to get substantial benefit. In the absence of notifications, once the delegation is recalled the client has to refresh its directory cache; this might not be very efficient for very large directories. </t> <t> The delegation is read-only and the client may not make changes to the directory other than by performing NFSv4.1 operations that modify the directory or the associated file attributes so that the server has knowledge of these changes. In order to keep the client's namespace synchronized with that of the server, the server will notify the delegation-holding client (assuming it has requested notifications) of the changes made as a result of that client's directory-modifying operations. This is to avoid any need for that client to send subsequent GETATTR or READDIR operations to the server. If a single client is holding the delegation and that client makes any changes to the directory (i.e., the changes are made via operations sent on a session associated with the client ID holding the delegation), the delegation will not be recalled. Multiple clients may hold a delegation on the same directory, but if any such client modifies the directory, the serverMUST<bcp14>MUST</bcp14> recall the delegation from the other clients, unless those clients have made provisions to be notified of that sort of modification. </t> <t> Delegations can be recalled by the server at any time. Normally, the server will recall the delegation when the directory changes in a way that is not covered by the notification, or when the directory changes and notifications have not been requested. If another client removes the directory for which a delegation has been granted, the server will recall the delegation. </t> </section> <sectiontitle="Attributesnumbered="true" toc="default"> <name>Attributes in Support of DirectoryNotifications">Notifications</name> <t> See <xref target="dir_not_attrs"/>format="default"/> for a description of the attributes associated with directory notifications. </t> </section> <sectiontitle="Directorynumbered="true" toc="default"> <name>Directory DelegationRecall">Recall</name> <t> The server will recall the directory delegation by sending a callback to the client. It will use the same callback procedure as used for recalling file delegations. The server will recall the delegation when the directory changes in a way that is not covered by the notification. However, the server need not recall the delegation if attributes of an entry within the directory change. </t> <t> If the server notices that handing out a delegation for a directory is causing too many notifications to be sent out, it may decide to not hand out delegations for that directory and/or recall those already granted. If a client tries to remove the directory for which a delegation has been granted, the server will recall all associated delegations. </t> <t> The implementation sections for a number of operations describe situations in which notification or delegation recall would be required under some common circumstances. In this regard, a similar set of caveats to those listed in <xref target="deleg_and_cb"/>format="default"/> apply.<list style="symbols"> <t></t> <ul spacing="normal"> <li> For CREATE, see <xref target="OP_CREATE_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For LINK, see <xref target="OP_LINK_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For OPEN, see <xref target="OP_OPEN_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For REMOVE, see <xref target="OP_REMOVE_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For RENAME, see <xref target="OP_RENAME_IMPLEMENTATION"/>. </t> <t>format="default"/>. </li> <li> For SETATTR, see <xref target="OP_SETATTR_IMPLEMENTATION"/>. </t> </list> </t>format="default"/>. </li> </ul> </section> <sectiontitle="Directorynumbered="true" toc="default"> <name>Directory DelegationRecovery">Recovery</name> <t> Recovery from client or server restart for state on regular files has two main goals: avoiding the necessity of breaking application guarantees with respect to locked files and delivery of updates cached at the client. Neither of these goals applies to directories protected by OPEN_DELEGATE_READ delegations and notifications. Thus, no provision is made for reclaiming directory delegations in the event of client or server restart. The client can simply establish a directory delegation in the same fashion as was done initially. </t> </section> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="NEW11"title="Multi-Server Namespace">numbered="true" toc="default"> <name>Multi-Server Namespace</name> <t> NFSv4.1 supports attributes that allow a namespace to extend beyond the boundaries of a single server. It is desirable that clients and servers support construction of such multi-server namespaces. Use of such multi-server namespaces isOPTIONAL<bcp14>OPTIONAL</bcp14>; however, and for many purposes, single-server namespaces are perfectly acceptable.UseThe use of multi-server namespaces can provide manyadvantages,advantages by separating a file system's logical position in a namespace from the (possibly changing) logistical and administrative considerations thatresult incause a particular filesystems beingsystem to be located on a particularserversserver via a single network accesspathspath that has to be known in advance or determined using DNS. </t> <sectiontitle="Terminology" anchor="SEC11-TERM">anchor="SEC11-TERM" numbered="true" toc="default"> <name>Terminology</name> <t> In this section as a whole(i.e.(i.e., within all of <xreftarget="NEW11"/>),target="NEW11" format="default"/>), the phrase "client ID" always refers to the 64-bit shorthand identifier assigned by the server (a clientid4) and never to the structurewhichthat the client uses to identify itself to the server (called an nfs_client_id4 or client_owner in NFSv4.0 andNFSv4.1NFSv4.1, respectively). The opaque identifier within those structures is referred to as a "client id string". </t> <sectiontitle="Terminologyanchor="SEC11-TERM-trunking" numbered="true" toc="default"> <name>Terminology Related toTrunking" anchor="SEC11-TERM-trunking">Trunking</name> <t> It is particularly important to clarify the distinction between trunking detection and trunking discovery. The definitions we present are applicable to all minor versions of NFSv4, but we will focus on how these terms apply to NFS version 4.1.<list style ='symbols'></t> <ul spacing="normal"> <li> <t> Trunking detection refers to ways of deciding whether two specific network addresses are connected to the same NFSv4 server. The means available to make this determination depends on the protocol version, and, in some cases, on the client implementation.<vspace blankLines="1"/></t> <t> In the case of NFS version 4.1 and later minor versions, the means of trunking detection are as described in this document and are available to every client. Two network addresses connected to the same server can always be used together to access a particular server but cannot necessarily be used together to access a single session. See below for definitions of the terms "server-trunkable" and"session-trunkable""session-trunkable". </t> </li> <li> <t> Trunking discovery is a process by which a client using one network address can obtain other addresses that are connected to the same server. Typically, it builds on a trunking detection facility by providing one or more methods by which candidate addresses are made available to theclientclient, who can then use trunking detection to appropriately filter them.<vspace blankLines="1"/></t> <t> Despite the support for trunkingdetectiondetection, there was no description of trunking discovery provided inRFC5661RFC 5661 <xreftarget="RFC5661"/>,target="RFC5661" format="default"/>, making it necessary to provide those means in this document. </t></list> </t></li> </ul> <t> The combination of a server network address and a particular connection type to be used by a connection is referred to as a "server endpoint". Although using different connection types may result in different ports being used, the use of different ports by multiple connections to the same network address in such cases is not the essence of the distinction between the two endpoints used. This is in contrast to the case of port-specific endpoints, in which the explicit specification of port numbers within network addresses is used to allow a single server node to support multiple NFS servers. </t> <t> Two network addresses connected to the same server are said to be server-trunkable. Two such addresses support the use ofclientidclient ID trunking, as described in <xreftarget="Trunking"/>.target="Trunking" format="default"/>. </t> <t> Two network addresses connected to the same server such that those addresses can be used to support a single common session are referred to as session-trunkable. Note that two addresses may be server-trunkable without beingsession-trunkablesession-trunkable, andthatthat, when two connections of different connection types are made to the same network address and are based on a single file system locationentryentry, they are always session-trunkable, independent of the connection type, as specified by <xreftarget="Trunking"/>,target="Trunking" format="default"/>, since their derivation from the same file system locationentryentry, together with the identity of their networkaddressesaddresses, assures that both connections are to the same server and will return server-ownerinformationinformation, allowing session trunking to be used. </t> </section> <sectiontitle="Terminologyanchor="SEC11-TERM-loc" numbered="true" toc="default"> <name>Terminology Related to File SystemLocation" anchor="SEC11-TERM-loc">Location</name> <t> Regarding the terminologyrelatingthat relates to the construction of multi-server namespaces out of a set of local per-server namespaces:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> Each server has a set of exported file systemswhichthat may be accessed by NFSv4 clients. Typically, this is done by assigning each file system a name within the pseudo-fs associated with the server, although the pseudo-fs may be dispensed with if there is only a single exported file system. Each such file system is part of the server's local namespace, and can be considered as a file system instance within a larger multi-server namespace.</t> <t></li> <li> The set of all exported file systems for a given server constitutes that server's local namespace.</t> <t></li> <li> In some cases, a server will have a namespace more extensive than its local namespace by using features associated with attributes that provide file system location information. These features, which allow construction of a multi-server namespace, are all described in individual sections below and include referrals(described in <xref target="SEC11-USES-ref"/>),(<xref target="SEC11-USES-ref" format="default"/>), migration(described in <xref target="SEC11-USES-migr"/>),(<xref target="SEC11-USES-migr" format="default"/>), and replication(described in <xref target="SEC11-USES-repl"/>). </t> <t>(<xref target="SEC11-USES-repl" format="default"/>). </li> <li> A file system present in a server's pseudo-fs may have multiple file system instances on different servers associated with it. All such instances are considered replicas of one another. Whether such replicas can be used simultaneously is discussed in <xreftarget="SEC11-EFF-simul"/>,target="SEC11-EFF-simul" format="default"/>, while the level ofco-ordinationcoordination between them (important when switching between them) is discussed in Sections <xref target="SEC11-EFF-fh" format="counter"/> through <xref target="SEC11-EFF-data" format="counter"/> below.</t> <t></li> <li> When a file system is present in a server's pseudo-fs, but there is no corresponding local file system, it is said to be "absent". In such cases, all associated instances will be accessed on other servers.</t> </list> </t></li> </ul> <t> Regarding the terminologyrelatingthat relates to attributes used in trunking discovery and other multi-server namespace features:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> File system location attributes include the fs_locations and fs_locations_info attributes.</t></li> <li> <t> File system location entries provide the individual file system locations within the file system location attributes. Each such entry specifies a server, in the form of ahost namehostname or an address, and an fs name, which designates the location of the file system within the server's local namespace. A file system location entry designates a set of server endpoints to which the client may establish connections. There may be multiple endpoints because ahost namehostname may map to multiple network addresses and because multiple connection types may be used to communicate with a single network address. However, except whereanexplicit port numbers are used to designate a set ofserverservers within a single server node, all such endpointsMUST<bcp14>MUST</bcp14> designate a way of connecting to a single server. The exact form of the location entry varies with the particular file system location attribute used, as described in <xreftarget="SEC11-loc-attr"/>. <vspace blankLines='1'/>target="SEC11-loc-attr" format="default"/>. </t> <t> The network addresses used in file system location entries typically appear without port number indications and are used to designate a server at one of the standard ports for NFS access, e.g., 2049 forTCP,TCP or 20049 for use with RPC-over-RDMA. Port numbers may be used in file system location entries to designate servers (typically user-level ones) accessed using other port numbers. In the case where network addresses indicate trunking relationships, the use of an explicit port number is inappropriate since trunking is a relationship between network addresses. See <xreftarget="SEC11-USES-trunk"/>target="SEC11-USES-trunk" format="default"/> for details. </t><t></li> <li> File system location elements are derived from locationentriesentries, and each describes a particular network accesspath,path consisting of a network address and a location within the server's local namespace. Such location elements need not appear within a file system location attribute, but the existence of each location element derives from a corresponding location entry. When a location entry specifies an IPaddressaddress, there is only a single corresponding location element. File system location entries that contain ahost namehostname are resolved using DNS, and may result in one or more location elements. All location elements consist of a location addresswhichthat includes the IP address of an interface to a server and an fsnamename, which is the location of the file system within the server's local namespace. The fs name can be empty if the server has no pseudo-fs and only a single exported file system at the root filehandle.</t> <t></li> <li> Two file system location elements are said to be server-trunkable if they specify the same fs name and the location addresses are such that the location addresses are server-trunkable. When the corresponding network paths are used, the client will always be able to use client ID trunking, but will only be able to use session trunking if the paths are also session-trunkable.</t> <t></li> <li> Two file system location elements are said to be session-trunkable if they specify the same fs name and the location addresses are such that the location addresses are session-trunkable. When the corresponding network paths are used, the client will be able to able to use either client ID trunking or session trunking.</t> </list> </t></li> </ul> <t> Discussion of the term "replica" is complicated by the fact that the term was used inRFC5661RFC 5661 <xreftarget="RFC5661"/>,target="RFC5661" format="default"/> with a meaning different from that used in this document. In short, in <xreftarget="RFC5661"/>target="RFC5661" format="default"/> each replica is identified by a single network accesspath while,path, while in the currentdocumentdocument, a set of network access pathswhichthat have server-trunkable network addresses and the same root-relative file system pathname is considered to be a single replica with multiple network access paths. </t> <t> Each set of server-trunkable location elements defines a set of available network access paths to a particular file system. When there are multiple such file systems, each of whichcontainscontaining the same data, these file systems are considered replicas of one another. Logically, such replication is symmetric, since the fs currently in use and an alternate fs are replicas of each other. Often, in other documents, the term "replica" is not applied to the fs currently in use, despite the fact that the replication relation is inherently symmetric. </t> </section> </section> <sectiontitle="Fileanchor="SEC11-loc-attr" numbered="true" toc="default"> <name>File System LocationAttributes" anchor="SEC11-loc-attr">Attributes</name> <t> NFSv4.1 contains attributes that provide information about how a given file system may be accessed (i.e., at what network address and namespaceposition) a given file system may be accessed.position). As a result, file systems in the namespace of one server can be associated with one or more instances of that file system on other servers. These attributes contain file system location entries specifying a server address target (either as a DNS name representing one or more IP addresses or as a specific IP address) together with the pathname of that file system within the associated single-server namespace. </t> <t> The fs_locations_infoRECOMMENDED<bcp14>RECOMMENDED</bcp14> attribute allows specification of one or more file system instance locations where the data corresponding to a given file system may be found.This attribute provides to the client, inIn addition to the specification of file system instance locations,otherthis attribute provides helpful informationsuch as: <list style='symbols'> <t> Information guidingto do the following: </t> <ul spacing="normal"> <li> Guide choices among the various file system instances provided (e.g., priority for use, writability, currency, etc.).</t> <t> Information to help</li> <li> Help the client efficiently effect as seamless a transition as possible among multiple file system instances, when and if that should be necessary.</t> <t> Information helping to guide</li> <li> Guide the selection of the appropriate connection type to be used when establishing a connection.</t> </list> </t></li> </ul> <t> Within the fs_locations_info attribute, each fs_locations_server4 entry corresponds to a file system locationentry withentry: the fls_server fielddesignatingdesignates the server,with the location pathname within the server's pseudo-fs given byand the fl_rootpath field of the encompassingfs_locations_item4.fs_locations_item4 gives the location pathname within the server's pseudo-fs. </t> <t> The fs_locations attribute defined in NFSv4.0 is also a part of NFSv4.1. This attribute only allows specification of the file system locations where the data corresponding to a given file system may be found. ServersSHOULD<bcp14>SHOULD</bcp14> make this attribute available whenever fs_locations_info is supported, but client use of fs_locations_info ispreferable, aspreferable because it provides more information. </t> <t> Within thefs_locationfs_locations attribute, each fs_location4 contains a file system location entry with the server field designating the server and the rootpath field giving the location pathname within the server's pseudo-fs. </t> </section> <sectiontitle="Fileanchor="presence_or_absence" numbered="true" toc="default"> <name>File System Presence orAbsence" anchor="presence_or_absence">Absence</name> <t> A given location in an NFSv4.1 namespace (typically but not necessarily a multi-server namespace) can have a number of file system instance locations associated with it (via the fs_locations or fs_locations_info attribute). There may also be an actual current file system at that location, accessible via normal namespace operations (e.g., LOOKUP). In this case, the file system is said to be "present" at that position in the namespace, and clients will typically use it, reserving use of additional locations specified via the location-related attributes to situations in which the principal location is no longer available. </t> <t> When there is no actual file system at the namespace location in question, the file system is said to be "absent". An absent file system contains no files or directories other than the root. Any reference to it, except to access a small set of attributes useful in determining alternate locations, will result in an error, NFS4ERR_MOVED. Note that if the server ever returns the error NFS4ERR_MOVED, itMUST<bcp14>MUST</bcp14> support the fs_locations attribute andSHOULD<bcp14>SHOULD</bcp14> support the fs_locations_info and fs_status attributes. </t> <t> While the error name suggests that we have a case of a file system that once was present, and has only become absent later, this is only one possibility. A position in the namespace may be permanently absent with the set of file system(s) designated by the location attributes being the only realization. The name NFS4ERR_MOVED reflects an earlier, more limited conception of its function, but this error will be returned whenever the referenced file system is absent, whether it has moved or not. </t> <t> Except in the case of GETATTR-type operations (to be discussed later), when the current filehandle at the start of an operation is within an absent file system, that operation is not performed and the error NFS4ERR_MOVED is returned, to indicate that the file system is absent on the current server. </t> <t> Because a GETFH cannot succeed if the current filehandle is within an absent file system, filehandles within an absent file system cannot be transferred to the client. When a client does have filehandles within an absent file system, it is the result of obtaining them when the file system was present, and having the file system become absent subsequently. </t> <t> It should be noted that because the check for the current filehandle being within an absent file system happens at the start of every operation, operations that change the current filehandle so that it is within an absent file system will not result in an error. This allows such combinations as PUTFH-GETATTR and LOOKUP-GETATTR to be used to get attribute information, particularly location attribute information, as discussed below. </t> <t> TheRECOMMENDED<bcp14>RECOMMENDED</bcp14> file system attribute fs_status can be used to interrogate the present/absent status of a given file system. </t> </section> <sectiontitle="Gettinganchor="absent_fs_attributes" numbered="true" toc="default"> <name>Getting Attributes for an Absent FileSystem" anchor="absent_fs_attributes" >System</name> <t> When a file system is absent, most attributes are not available, but it is necessary to allow the client access to the small set of attributes that are available, and most particularly those that give information about the correct current locations for this file system: fs_locations and fs_locations_info. </t> <section anchor="absent_getattr"title="GETATTRnumbered="true" toc="default"> <name>GETATTR within an Absent FileSystem">System</name> <t> As mentioned above, an exception is made for GETATTR in that attributes may be obtained for a filehandle within an absent file system. This exception only applies if the attribute mask contains at least one attribute bit that indicates the client is interested in a result regarding an absent file system: fs_locations, fs_locations_info, or fs_status. If none of these attributes is requested, GETATTR will result in an NFS4ERR_MOVED error. </t> <t> When a GETATTR is done on an absent file system, the set of supported attributes is very limited. Many attributes, including those that are normallyREQUIRED,<bcp14>REQUIRED</bcp14>, will not be available on an absent file system. In addition to the attributes mentioned above (fs_locations, fs_locations_info, fs_status), the following attributesSHOULD<bcp14>SHOULD</bcp14> be available on absent file systems. In the case ofRECOMMENDED<bcp14>RECOMMENDED</bcp14> attributes, they should be available at least to the same degree that they are available on present file systems. </t><t> <list style='hanging'> <t hangText="change_policy:"><dl newline="false" spacing="normal"> <dt>change_policy:</dt> <dd> This attribute is useful for absent file systems and can be helpful in summarizing to the client when any of the location-related attributes change.</t> <t hangText="fsid:"></dd> <dt>fsid:</dt> <dd> This attribute should be provided so that the client can determine file system boundaries, including, in particular, the boundary between present and absent file systems. This value must be different from any other fsid on the current server and need have no particular relationship to fsids on any particular destination to which the client might be directed.</t> <t hangText="mounted_on_fileid:"></dd> <dt>mounted_on_fileid:</dt> <dd> For objects at the top of an absent file system, this attribute needs to be available. Since the fileid is within the present parent file system, there should be no need to reference the absent file system to provide this information.</t> </list> </t></dd> </dl> <t> Other attributesSHOULD NOT<bcp14>SHOULD NOT</bcp14> be made available for absent file systems, even when it is possible to provide them. The server should not assume that more information is always better and should avoid gratuitously providing additional information. </t> <t> When a GETATTR operation includes a bit mask for one of the attributes fs_locations, fs_locations_info, or fs_status, but where the bit mask includes attributes that are not supported, GETATTR will not return an error, but will return the mask of the actual attributes supported with the results. </t> <t> Handling of VERIFY/NVERIFY is similar to GETATTR in that if the attribute mask does not include fs_locations, fs_locations_info, or fs_status, the error NFS4ERR_MOVED will result. It differs in that any appearance in the attribute mask of an attribute not supported for an absent file system (and note that this will include some normallyREQUIRED<bcp14>REQUIRED</bcp14> attributes) will also cause an NFS4ERR_MOVED result. </t> </section> <section anchor="absent_readdir"title="READDIRnumbered="true" toc="default"> <name>READDIR and Absent FileSystems">Systems</name> <t> A READDIR performed when the current filehandle is within an absent file system will result in an NFS4ERR_MOVED error, since, unlike the case of GETATTR, no such exception is made for READDIR. </t> <t> Attributes for an absent file system may be fetched via a READDIR for a directory in a present file system, when that directory contains the root directories of one or more absent file systems. In this case, the handling is as follows: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> If the attribute set requested includes one of the attributes fs_locations, fs_locations_info, or fs_status, then fetching of attributes proceeds normally and no NFS4ERR_MOVED indication is returned, even when the rdattr_error attribute is requested.</t> <t></li> <li> If the attribute set requested does not include one of the attributes fs_locations, fs_locations_info, or fs_status, then if the rdattr_error attribute is requested, each directory entry for the root of an absent file system will report NFS4ERR_MOVED as the value of the rdattr_error attribute.</t> <t></li> <li> If the attribute set requested does not include any of the attributes fs_locations, fs_locations_info, fs_status, or rdattr_error, then the occurrence of the root of an absent file system within the directory will result in the READDIR failing with an NFS4ERR_MOVED error.</t> <t></li> <li> The unavailability of an attribute because of a file system's absence, even one that is ordinarilyREQUIRED,<bcp14>REQUIRED</bcp14>, does not result in any error indication. The set of attributes returned for the root directory of the absent file system in that case is simply restricted to those actually available.</t> </list> </t></li> </ul> </section> </section> <sectiontitle="Usesanchor="SEC11-USES" numbered="true" toc="default"> <name>Uses of File System LocationInformation" anchor="SEC11-USES">Information</name> <t> The file system location attributes(i.e.(i.e., fs_locations and fs_locations_info), together with the possibility of absent file systems, provide a number of important facilitiesin providingfor reliable, manageable, and scalable data access. </t> <t> When a file system is present, these attributes can provide<list style="symbols"> <t>the following: </t> <ul spacing="normal"> <li> The locations of alternativereplicas,replicas to be used to access the same data in the event of server failures, communications problems, or other difficulties that make continued access to the current replica impossible or otherwise impractical.ProvisionProvisioning and use of such alternate replicas is referred to as "replication" and is discussed in <xreftarget="SEC11-USES-repl"/>target="SEC11-USES-repl" format="default"/> below.</t> <t></li> <li> The network address(es) to be used to access the current file system instance or replicas of it. Client use of this information is discussed in <xreftarget="SEC11-USES-trunk"/>target="SEC11-USES-trunk" format="default"/> below.</t> </list> </t></li> </ul> <t> Under some circumstances, multiple replicas may be used simultaneously to provide higher-performance access to the file system in question, although the lack of state sharing between servers may be an impediment to such use. </t> <t> When a file system is presentandbut becomes absent, clients can be given the opportunity to have continued access to theirdata,data using a different replica. In this case, a continued attempt to use the data in the now-absent file system will result in an NFS4ERR_MOVEDerror and, at that point,error, and then the successor replica or set of possible replica choices can be fetched and used to continue access. Transfer of access to the new replica location is referred to as"migration","migration" and is discussed in <xreftarget="SEC11-USES-repl"/>target="SEC11-USES-repl" format="default"/> below. </t> <t>WhereWhen a file system is currently absent, specification of file system location provides a means by which file systems located on one server can be associated with a namespace defined by another server, thus allowing a general multi-server namespace facility. A designation of such a remote instance, in place of a file system not previously present, is called a "pure referral" and is discussed in <xreftarget="SEC11-USES-ref"/>target="SEC11-USES-ref" format="default"/> below. </t> <t> Because client support for attributes related to file system location isOPTIONAL,<bcp14>OPTIONAL</bcp14>, a server may choose to take action to hide migration and referral events from such clients, by acting as a proxy, for example. The server can determine the presence of client support from the arguments of the EXCHANGE_ID operation (see <xref target="OP_EXCHANGE_ID_DESCRIPTION"/>).format="default"/>). </t> <sectiontitle="Combininganchor="SEC11-USES-mult" numbered="true" toc="default"> <name>Combining Multiple Uses in a SingleAttribute" anchor="SEC11-USES-mult">Attribute</name> <t> A file system location attribute will sometimes contain information relating to the location of multiplereplicasreplicas, which may be used in differentways. <list style="symbols"> <t>ways: </t> <ul spacing="normal"> <li> File system location entries that relate to the file system instance currently in use provide trunking information, allowing the client to find additional network addresses by which the instance may be accessed.</t> <t></li> <li> File system location entries that provide information about replicas to which access is to be transferred.</t> <t></li> <li> Other file system location entries that relate to replicas that are available to use in the event that access to the current replica becomes unsatisfactory.</t> </list> </t></li> </ul> <t> In order to simplify client handling and to allow the best choice of replicas to access, the server should adhere to the followingguidelines. <list style="symbols"> <t>guidelines: </t> <ul spacing="normal"> <li> All file system location entries that relate to a single file system instance should be adjacent.</t> <t></li> <li> File system location entries that relate to the instance currently in use should appear first.</t> <t></li> <li> File system location entries that relate to replica(s) to which migration is occurring should appear before replicaswhichthat are available for later use if the current replica should become inaccessible.</t> </list> </t></li> </ul> </section> <sectiontitle="Fileanchor="SEC11-USES-trunk" numbered="true" toc="default"> <name>File System Location Attributes andTrunking" anchor="SEC11-USES-trunk">Trunking</name> <t> Trunking is the use of multiple connections between a client and server in order to increase the speed of data transfer. A client may determine the set of network addresses to use to access a given file system in a number of ways:<list style="symbols"> <t></t> <ul spacing="normal"> <li> When the name of the server is known to the client, it may use DNS to obtain a set of network addresses to use in accessing the server.</t> <t></li> <li> The client may fetch the file system location attribute for the file system. This will provide either the name of the server (which can be turned into a set of network addresses usingDNS),DNS) or a set of server-trunkable location entries. Using the latter alternative, the server can provide addresses it regards as desirable to use to access the file system in question. Although these entries can contain port numbers, these port numbers are not used in determining trunking relationships. Once the candidate addresses have been determined and EXCHANGE_ID done to the proper server, only the value of theso_majorso_major_id field returned by the servers in question determines whether a trunking relationship actually exists.</t> </list> </t></li> </ul> <t>It should be noted thatWhen theclient, when itclient fetches a location attribute for a file system, it should be noted that the client may encounter multiple entries for a number of reasons,so that,such that whendeterminingit determines trunking information, it mayhaveneed to bypass addresses not trunkable with one already known. </t> <t> The server can provide location entries that include either names or network addresses. It might use the latter form because of DNS-related security concerns or because the set of addresses to be used might require active management by the server. </t> <t> Location entries used to discover candidate addresses for use in trunking are subject to change, as discussed in <xreftarget="SEC11-USES-changes"/>target="SEC11-USES-changes" format="default"/> below. The client may respond to such changes by using additional addresses once they are verified or by ceasing to use existing ones. The server can force the client to cease using an address by returning NFS4ERR_MOVED when that address is used to access a file system. This allows a transfer of client accesswhichthat is similar to migration, although the same file system instance is accessed throughout. </t> </section> <sectiontitle="Fileanchor="SEC11-USES-types" numbered="true" toc="default"> <name>File System Location Attributes and Connection TypeSelection" anchor="SEC11-USES-types">Selection</name> <t> Because of the need to support multiple types of connections, clients face the issue of determining the proper connection type to use when establishing a connection to a given server network address. In some cases, this issue can be addressed through the use of the connection "step-up" facility described in <xreftarget="OP_CREATE_SESSION"/>.target="OP_CREATE_SESSION" format="default"/>. However, because there are casesisin which that facility is not available, the client may have to choose a connection type with no possibility of changing it within the scope of a single connection. </t> <t> The two file system location attributes differ as to the information made available in this regard.Fs_locationsThe fs_locations attribute provides no information to support connection type selection. As a result, clients supporting multiple connection types would need to attempt to establish connections using multiple connection types until the one preferred by the client is successfully established. </t> <t>Fs_locations_infoThe fs_locations_info attribute includesathe FSLI4TF_RDMA flag,FSLI4TF_RDMA, which, when set indicates that RPC-over-RDMA supportwhich isavailable using the specified location entry, by "stepping up" an existing TCP connection to include support for RDMA operation. This flag makes itconvenient for a client wishing to use RDMA. When this flag is set, it indicates that RPC-over-RDMA support is available using the specified location entry. A client can establish a TCP connection and then convert that connection to use RDMA by using the step-up facility. </t> <t> Irrespective of the particular attribute used, when there is no indication that a step-up operation can be performed, a client supporting RDMA operation can establish a new RDMAconnectionconnection, and it can be bound to the session already established by the TCP connection, allowing the TCP connection to be dropped and the session converted to further use in RDMA mode, if the server supports that. </t> </section> <sectiontitle="Fileanchor="SEC11-USES-repl" numbered="true" toc="default"> <name>File SystemReplication" anchor="SEC11-USES-repl">Replication</name> <t> The fs_locations and fs_locations_info attributes provide alternative file system locations, to be used to access data in place of or in addition to the current file system instance. On first access to a file system, the client should obtain the set of alternate locations by interrogating the fs_locations or fs_locations_info attribute, with the latter being preferred. </t> <t> In the event that the occurrence of server failures, communications problems, or other difficulties make continued access to the current file system impossible or otherwise impractical, the client can use the alternate locations as a way to get continued access to its data. </t> <t> The alternate locations may be physical replicas of the (typically read-only) file system data supplemented by possible asynchronous propagation of updates. Alternatively, they may provide for the use of various forms of server clustering in which multiple servers provide alternate ways of accessing the same physical file system. How the difference between replicas affects file system transitions can be represented within the fs_locations and fs_locations_infoattributesattributes, and how the client deals with file system transition issues will be discussed in detail in later sections. </t> <t> Although the location attributes provide some information about the nature of the inter-replica transition, many aspects of the semantics of possible asynchronous updates are not currently described by the protocol,makingwhich makes it necessarythatfor clients using replication to switch among replicas undergoing change to familiarize themselves with the semantics of the update approach used.Because ofDue to this lack of specificity, many applications may find the use of migration moreappropriate, since, in that case, the server, when effecting the transition, has establishedappropriate because apoint in time such thatserver can propagate all updates made beforethat can propagatedan established point in time to the new replica as part of the migration event. </t> <sectiontitle="Fileanchor="SEC11-USES-repl-trunk" numbered="true" toc="default"> <name>File System Trunking Presented asReplication" anchor="SEC11-USES-repl-trunk">Replication</name> <t> In some situations, a file system location entry may indicate a file system access path to be used as an alternate location, where trunking, rather than replication, is to be used. The situations in which this is appropriate are limited to those in which both of the following aretrue. <list style="symbols"> <t>true: </t> <ul spacing="normal"> <li> The two file system locations (i.e., the one on which the location attribute is obtained and the one specified in the file system location entry) designate the same locations within their respective single-server namespaces.</t> <t></li> <li> The two server network addresses (i.e., the one being used to obtain the location attribute and the one specified in the file system location entry) designate the same server (as indicated by the same value of the so_major_id field of the eir_server_owner field returned in response to EXCHANGE_ID).</t> </list> </t></li> </ul> <t> When these conditions hold, operations using both access paths are generally trunked,although,although trunking may be disallowed when the attribute fs_locations_info isused, trunking may be disallowed: <list style="symbols">used: </t> <ul spacing="normal"> <li> <t> When the fs_locations_info attribute shows the two entries as not having the same simultaneous-use class, trunking isinhibitedinhibited, and the two access paths cannot be used together.<vspace blankLines="1"/></t> <t> In thiscasecase, the two paths can be used serially with no transition activity required on the part of theclient. In this case,client, and any transition between access paths istransparent, and the client, intransparent. In transferring access from one to the other,is acting as it would intheevent thatclient acts as if communicationiswere interrupted,withestablishing a new connection and possibly a new sessionbeing establishedto continue access to the same file system. </t><t></li> <li> Note that for two such location entries, any information within the fs_locations_info attribute that indicates the need for special transition activity, i.e., the appearance of the two file system location entries with different handle, fileid, write-verifier, change, and readdir classes, indicates a serious problem. The client, if it allows transition to the file system instance at all, must not treat any transition as a transparent one. The serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> indicate that these two entries (for the same file system on the same server) belong to different handle, fileid, write-verifier, change, and readdir classes, whether or not the two entries are shown belonging to the same simultaneous-use class.</t> </list> </t></li> </ul> <t> These situations were recognized by <xreftarget="RFC5661"/>,target="RFC5661" format="default"/>, even though that document made no explicit mention oftrunking. <list style="symbols"> <t>trunking: </t> <ul spacing="normal"> <li> It treated the situation that we describe as trunking as one of simultaneous use of two distinct file system instances, even though, in the explanatory framework now used to describe the situation, the case is one in which a single file system is accessed by two different trunked addresses.</t> <t></li> <li> It treated the situation in which two paths are to be used serially as a special sort of "transparent transition".however,However, in the descriptive framework now used to categorize transition situations, this is considered a case of a "network endpoint transition" (see <xreftarget="SEC11-trans-oview"/>). </t> </list> </t>target="SEC11-trans-oview" format="default"/>). </li> </ul> </section> </section> <sectiontitle="Fileanchor="SEC11-USES-migr" numbered="true" toc="default"> <name>File SystemMigration" anchor="SEC11-USES-migr">Migration</name> <t> When a file system is present and becomes inaccessible using the current access path, the NFSv4.1 protocol provides a means by which clients can be given the opportunity to have continued access to their data. This may involveuse ofusing a different access path to the existing replica orbyproviding a path to a different replica. The new access path or the location of the new replica is specified by a file system location attribute. The ensuing migration of access includes the ability to retain locks across the transition. Depending on circumstances, this can involve:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The continued use of the existing clientid when accessing the current replica using a new access path.</t> <t></li> <li> Use of lock reclaim, taking advantage of a per-fs grace period.</t> <t></li> <li> Use of Transparent State Migration.</t> </list> </t></li> </ul> <t> Typically, a client will be accessing the file system in question, get an NFS4ERR_MOVED error, and then use a file system location attribute to determine the new access path for the data. When fs_locations_info is used, additional information will be available that will define the nature of the client's handling of the transition to a new server. </t> <t> In most instances, servers will choose to migrate all clients using a particular file system to a successor replica at the same time to avoid cases in which different clients are updating different replicas.HoweverHowever, migration of an individual client can be helpful in providing load balancing, as long as the replicas in question are such that they represent the same data as described in <xreftarget="SEC11-EFF-data"/>. <list style="symbols"> <t>target="SEC11-EFF-data" format="default"/>. </t> <ul spacing="normal"> <li> In the case in which there is no transition between replicas (i.e., only a change in access path), there are no special difficulties in using of this mechanism to effect load balancing.</t> <t></li> <li> In the case in which the two replicas are sufficientlyco-ordinatedcoordinated as to allowcoherenta single client coherent, simultaneous access toboth by a single client,both, there is, in general, no obstacle to the use of migration of particular clients to effect load balancing. Generally, such simultaneous use involvesco-operationcooperation between servers to ensure that locks granted on twoco-ordinatedcoordinated replicas cannot conflict and can remain effective when transferred to a common replica.</t> <t></li> <li> In the case in which a large set of clientsareis accessing a file system in a read-only fashion,init can be helpful to migrate all clients with writable access simultaneously, while using load balancing on the set of read-only copies, as long as the rulesappearingin <xreftarget="SEC11-EFF-data"/>,target="SEC11-EFF-data" format="default"/>, which are designed to prevent datareversionreversion, areadhered to. </t> </list> </t>followed. </li> </ul> <t> In other cases, the client might not have sufficient guarantees of datasimilarity/coherencesimilarity or coherence to function properly(e.g.(e.g., the data in the two replicas is similar but not identical), and the possibility that different clients are updating different replicas can exacerbate the difficulties, making the use of load balancing in such situations a perilous enterprise. </t> <t> The protocol does not specify how the file system will be moved between servers or how updates to multiple replicas will beco-ordinated.coordinated. It is anticipated that a number of different server-to-serverco-ordinationcoordination mechanisms might beusedused, with the choice left to the server implementer. The NFSv4.1 protocol specifies the method used to communicate the migration event between client and server. </t> <t>The new location may be, inIn the case of various forms of server clustering, the new location may be another server providing access to the same physical file system. The client's responsibilities in dealing with this transition will depend on whether a switch between replicas has occurred and the means the server has chosen to provide continuity of locking state. These issues will be discussed in detail below. </t> <t> Although a single successor location is typical, multiple locations may be provided. When multiple locations are provided, the client will typically use the first one provided. If that is inaccessible for some reason, later ones can be used. In suchcasescases, the client might consider the transition to the new replica to be a migration event, even though some of the servers involved might not be aware of the use of the serverwhichthat was inaccessible. In such a case, a client might lose access to locking state as a result of the access transfer. </t> <t> When an alternate location is designated as the target for migration, it must designate the same data (with metadata being the same to the degree indicated by the fs_locations_info attribute). Where file systems are writable, a change made on the original file system must be visible on all migration targets. Where a file system is not writable but represents a read-only copy (possibly periodically updated) of a writable file system, similar requirements apply to the propagation of updates. Any change visible in the original file system must already be effected on all migration targets, to avoid any possibility that a client, in effecting a transition to the migration target, will see any reversion in file system state. </t> </section> <sectiontitle="Referrals" anchor="SEC11-USES-ref">anchor="SEC11-USES-ref" numbered="true" toc="default"> <name>Referrals</name> <t> Referrals allow the server to associate a file system namespace entry located on one server with a file system located on another server. When this includes the use of pure referrals, servers are provided a way of placing a file system in a location within the namespace essentially without respect to its physical location on a particular server. This allows a single server or a set of servers to present a multi-server namespace that encompasses file systems located on a wider range of servers. Some likely uses of this facility include establishment of site-wide or organization-wide namespaces, with the eventual possibility of combining such together into a truly global namespace, such as the one provided by AFS (the Andrew File System) <xreftarget="AFS"/>.target="AFS" format="default"/>. </t> <t> Referrals occur when a client determines, upon first referencing a position in the current namespace, that it is part of a new file system and that the file system is absent. When this occurs, typically upon receiving the error NFS4ERR_MOVED, the actual location or locations of the file system can be determined by fetching a locations attribute. </t> <t> The file system location attribute may designate a single file system location or multiple file system locations, to be selected based on the needs of the client. The server, in the fs_locations_info attribute, may specify priorities to be associated with various file system location choices. The server may assign different priorities to different locations as reported to individual clients, in order to adapt to client physical location or to effect load balancing. When both read-only and read-write file systems are present, some of the read-only locations might not be absolutely up-to-date (as they would have to be in the case of replication and migration). Servers may also specify file system locations that include client-substituted variables so that different clients are referred to different file systems (with different data contents) based on client attributes such as CPU architecture. </t> <t>WhenIf the fs_locations_info attributeis such that that there arelists multiple possibletargets listed,targets, the relationships among them may be important to the client in selecting which one to use. The same rules specified in <xreftarget="SEC11-USES-migr"/>target="SEC11-USES-migr" format="default"/> below regarding multiple migration targets apply to these multiple replicas as well. For example, the client might prefer a writable target on a server that has additional writable replicas to which it subsequently might switch. Note that, as distinguished from the case of replication, there is no need to deal with the case of propagation of updates made by the current client, since the current client has not accessed the file system in question. </t> <t> Use of multi-server namespaces is enabled by NFSv4.1 but is not required. The use of multi-server namespaces and their scope will depend on the applications used and system administration preferences. </t> <t> Multi-server namespaces can be established by a single server providing a large set of pure referrals to all of the included file systems. Alternatively, a single multi-server namespace may be administratively segmented with separate referral file systems (on separate servers) for each separately administered portion of the namespace. The top-level referral file system or any segment may use replicated referral file systems for higher availability. </t> <t> Generally, multi-server namespaces are for the most part uniform, in that the same data made available to one client at a given location in the namespace is made available to all clients at that namespace location. However, there are facilities provided that allow different clients to be directed to different sets of data, for reasons such as enabling adaptation to such client characteristics as CPU architecture. These facilities are described in <xreftarget="SEC11-fsli-item"/>.target="SEC11-fsli-item" format="default"/>. </t> <t> Note that it is possible, when providing a uniform namespace, to provide different location entries to differentclients,clients in order to provide each client with a copy of the data physically closest toit,it or otherwise optimize access(e.g.(e.g., provide load balancing). </t> </section> <sectiontitle="Changesanchor="SEC11-USES-changes" numbered="true" toc="default"> <name>Changes in a File System LocationAttribute" anchor="SEC11-USES-changes">Attribute</name> <t> Although clients will typically fetch a file system location attribute when first accessing a file system and when NFS4ERR_MOVED is returned, a client can choose to fetch the attribute periodically, in whichcasecase, the value fetched may change over time. </t> <t> For clients not prepared to access multiple replicas simultaneously (see <xreftarget="SEC11-EFF-simul"/>),target="SEC11-EFF-simul" format="default"/>), the handling of the various cases of location change are as follows:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Changes in the list of replicas or in the network addresses associated with replicas do not require immediate action. The client will typically update its list of replicas to reflect the new information.</t> <t></li> <li> Additions to the list of network addresses for the current file system instance need not be acted on promptly. However, to prepare forthe case in whicha subsequent migrationevent occurs subsequently,event, the client can choose to take note of the new address and then use it whenever it needs to switch access to a new replica.</t> <t></li> <li> Deletions from the list of network addresses for the current file system instance do notneedrequire the client tobe acted onimmediatelyby ceasingcease use of existing accesspathspaths, although new connections are not to be established on addresses that have been deleted. However, clients can choose to act on such deletions bymaking preparationspreparing for an eventual shift inaccessaccess, whichwould becomebecomes unavoidable as soon as the serverindicatesreturns NFS4ERR_MOVED to indicate that a particular network access path is not usable to access the current filesystem, by returning NFS4ERR_MOVED. </t> </list> </t>system. </li> </ul> <t> For clients that are prepared to access several replicas simultaneously, the following additional cases need to be addressed. As in the cases discussed above, changes in the set of replicas need not be acted upon promptly, although the client has the option of adjusting its access even in the absence of difficulties that would lead to the selection of a newreplica to be selected. <list style="symbols"> <t>replica. </t> <ul spacing="normal"> <li> When a new replica isaddedadded, which may be accessed simultaneously with one currently in use, the client is free to use the new replica immediately.</t> <t></li> <li> When a replica currently in use is deleted from the list, the client need not cease using it immediately. However, since the server may subsequently force such use to cease (by returning NFS4ERR_MOVED), clients might decide to limit the need for later state transfer. For example, new opens might be done on other replicas, rather than on one not present in the list.</t> </list> </t></li> </ul> </section> </section> <sectiontitle="Trunkinganchor="SEC11-TRUNK" numbered="true" toc="default"> <name>Trunking without File System LocationInformation" anchor="SEC11-TRUNK">Information</name> <t> In situations in which a file system is accessed using two server-trunkable addresses (as indicated by the same value of the so_major_id field of the eir_server_owner field returned in response to EXCHANGE_ID), trunked access is allowed even though there might not be any location entries specifically indicating the use of trunking for that file system. </t> <t> This situation was recognized by <xreftarget="RFC5661"/>, even thoughtarget="RFC5661" format="default"/>, although that document made no explicit mention of trunking and treated the situation as one of simultaneous use of two distinct file systeminstances, even though, ininstances. In the explanatory framework now used to describe the situation, the case is one in which a single file system is accessed by two different trunked addresses. </t> </section> <sectiontitle="Usersanchor="SEC11-users" numbered="true" toc="default"> <name>Users and Groups in aMulti-server Namespace" anchor="SEC11-users">Multi-Server Namespace</name> <t> As in the case of a single-server environment (see <xreftarget="owner_owner_group"/>,target="owner_owner_group" format="default"/>), when an owner or group name of the form "id@domain" is assigned to a file, there is an implicit promise to return that same string when the corresponding attribute is interrogated subsequently. In the case of a multi-server namespace, that same promise applies even if server boundaries have been crossed. Similarly, when the owner attribute of a file is derived from the security principalwhichthat created the file, that attribute should have the same value even if the interrogation occurs on a different server from the file creation. </t> <t> Similarly, the set of security principals recognized by all the participating servers needs to be the same, with each such principal having the same credentials, regardless of the particular server being accessed. </t> <t> In order to meet these requirements, those setting up multi-server namespaces will need to limit the servers included so that:<list style="symbols"> <t></t> <ul spacing="normal"> <li> In all cases in which more than a single domain is supported, the requirements stated inRFC8000RFC 8000 <xreftarget="RFC8000"/>target="RFC8000" format="default"/> are to be respected.</t> <t></li> <li> All servers support a common set of domainswhichthat includes all of the domains clients use and expect to see returned as the domain portion of an owner or group in the form "id@domain". Notethatthat, although this set most often consists of a single domain, it is possible for multiple domains to be supported.</t> <t></li> <li> All servers, for each domain that they support, accept the same set of user and group ids as valid.</t> <t></li> <li> All servers recognize the same set of security principals. For each principal, the same credential is required, independent of the server being accessed. In addition, the group membership for each such principal is to be the same, independent of the server accessed.</t> </list> </t></li> </ul> <t> Note that there is no requirement in general that the users corresponding to particular security principals have the same local representation on each server, even though it is most often the case that this is so. </t> <t> When AUTH_SYS is used, the following additional requirements must be met:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Only a single NFSv4 domain can be supported through the use of AUTH_SYS.</t> <t></li> <li> The "local" representation of all owners and groups must be the same on all servers. The word "local" is used here since that is the way that numeric user and group ids are described in <xreftarget="owner_owner_group"/>.target="owner_owner_group" format="default"/>. However, when AUTH_SYS or stringified numeric owners or groups are used, these identifiers are not truly local, since they are known to the clients as well as to the server.</t> </list> </t></li> </ul> <t> Similarly, when stringified numeric user and group ids are used, the "local" representation of all owners and groups must be the same on all servers, even when AUTH_SYS is not used. </t> </section> <sectiontitle="Additionalanchor="SEC11-csr" numbered="true" toc="default"> <name>Additional Client-SideConsiderations" anchor="SEC11-csr">Considerations</name> <t> When clients make use of servers that implement referrals, replication, and migration, care should be taken that a user who mounts a given file system that includes a referral or a relocated file system continues to see a coherent picture of that user-side file system despite the fact that it contains a number of server-side file systems that may be on different servers. </t> <t> One important issue is upward navigation from the root of a server-side file system to its parent (specified as ".." in UNIX), in the case in which it transitions to that file system as a result of referral, migration, or a transition as a result of replication. When the client is at such a point, and it needs to ascend to the parent, it must go back to the parent as seen within the multi-server namespace rather than sending a LOOKUPP operation to the server, which would result in the parent within that server's single-server namespace. In order to do this, the client needs to remember the filehandles that represent such file system roots and use these instead of sending a LOOKUPP operation to the current server. This will allow the client to present to applications a consistent namespace, where upward navigation and downward navigation are consistent. </t> <t> Another issue concerns refresh of referral locations. When referrals are used extensively, they may change as server configurations change. It is expected that clients will cache information related to traversing referrals so that future client-side requests are resolved locally without server communication. This is usually rooted in client-side name look up caching. Clients should periodically purge this data for referral points in order to detect changes in location information. When the change_policy attribute changes for directories that hold referral entries or for the referral entries themselves, clients should consider any associated cached referral information to be out of date. </t> </section> <sectiontitle="Overviewanchor="SEC11-trans-oview" numbered="true" toc="default"> <name>Overview of File AccessTransitions" anchor="SEC11-trans-oview">Transitions</name> <t> File access transitions are of two types:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Those that involve a transition from accessing the current replica to another one in connection with either replication or migration. How these are dealt with is discussed in <xreftarget="SEC11-EFF"/>. </t> <t>target="SEC11-EFF" format="default"/>. </li> <li> Those in which access to the current file system instance is retained, while the network path used to access that instance is changed. This case is discussed in <xreftarget="SEC11-nwa"/>. </t> </list> </t>target="SEC11-nwa" format="default"/>. </li> </ul> </section> <sectiontitle="Effectinganchor="SEC11-nwa" numbered="true" toc="default"> <name>Effecting Network EndpointTransitions" anchor="SEC11-nwa">Transitions</name> <t> The endpoints used to access a particular file system instance may change in a number of ways, as listed below. In each of these cases, the same fsid,filehandles, stateids,clientIDsIDs, filehandles, and stateids are used to continue access, with a continuity of lock state. In many cases, the same sessions can also be used. </t> <t> The appropriate action depends on the set of replacement addresses(i.e.that are available for use (i.e., server endpointswhichthat are server-trunkable with one previously beingused) which are available for use.used). </t><t> <list style="symbols"> <t><ul spacing="normal"> <li> When use of a particular address is toceasecease, and there is also anotheroneaddress currently in usewhichthat is server-trunkable with it, requests that would have been issued on the address whose use is to be discontinued can be issued on the remaining address(es). When an address is server-trunkable but not session-trunkable with the address whose use is to be discontinued, the request might need to be modified to reflect the fact that a different session will be used.</t> <t></li> <li> When use of a particular connection is to cease, as indicated by receiving NFS4ERR_MOVED when using thatconnectionconnection, but that address is still indicated as accessible according to the appropriate file system location entries, it is likely that requests can be issued on a new connection of a different connectiontype,type once that connection is established. Since anytwo,two non-port-specific server endpoints that share a network address are inherently session-trunkable, the client can use BIND_CONN_TO_SESSION to access the existing sessionusing the new connection and proceed to access the file system usingwith the new connection.</t> <t></li> <li> When there are no potential replacement addresses inuseuse, but there are valid addresses session-trunkable with the one whose use is to be discontinued, the client can use BIND_CONN_TO_SESSION to access the existing session using the new address. Although the target session will generally be accessible, there may be rare situations in which that session is no longeraccessible,accessible when an attempt is made to bind the new connection to it. In this case, the client can create a new session to enable continued access to the existing instance using the new connection, providing for the use of existing filehandles, stateids, and client ids whileprovidingsupplying continuity of locking state.</t> <t></li> <li> When there is no potential replacement address inuseuse, and there are no valid addresses session-trunkable with the one whose use is to be discontinued, other server-trunkable addresses may be used to provide continued access. Although the use of CREATE_SESSION is available to provide continued access to the existing instance, servers have the option of providing continued access to the existing session through the new network access path in a fashion similar to that provided by session migration (see <xreftarget="SEC11-trans-locking"/>).target="SEC11-trans-locking" format="default"/>). To take advantage of this possibility, clients can perform an initial BIND_CONN_TO_SESSION, as in the previous case, and use CREATE_SESSION only if that fails.</t> </list> </t></li> </ul> </section> <sectiontitle="Effectinganchor="SEC11-EFF" numbered="true" toc="default"> <name>Effecting File SystemTransitions" anchor="SEC11-EFF">Transitions</name> <t> There are a range of situations in which there is a change to be effected in the set of replicas used to access a particular file system. Some of these may involve an expansion or contraction of the set of replicas used as discussed in <xreftarget="SEC11-EFF-simul"/>target="SEC11-EFF-simul" format="default"/> below. </t> <t> For reasons explained in that section, most transitions will involve a transition from a single replica to a corresponding replacement replica. When effecting replica transition, some types of sharing between the replicas may affect handling of the transition as described in Sections <xref target="SEC11-EFF-fh" format="counter"/> through <xref target="SEC11-EFF-data" format="counter"/> below. The attribute fs_locations_info provides helpful information to allow the client to determine the degree of inter-replica sharing. </t> <t> With regard to some types of state, the degree of continuity across the transition depends on the occasion prompting the transition, with transitions initiated by the servers(i.e.(i.e., migration) offering much more scope for anon-disruptivenondisruptive transition than cases in which the client on its own shifts its access to another replica(i.e.(i.e., replication). This issue potentially applies to locking state and to session state, which are dealt with below as follows:<list style="symbols"> <t></t> <ul spacing="normal"> <li> An introduction to the possible means of providing continuity in these areas appears in <xreftarget="SEC11-EFF-lock"/>target="SEC11-EFF-lock" format="default"/> below.</t> <t></li> <li> Transparent State Migration is introduced in <xreftarget="SEC11-trans-locking"/>.target="SEC11-trans-locking" format="default"/>. The possible transfer of session state is addressed there as well.</t> <t></li> <li> The client handling of transitions, including determining how to deal with the various means that the server might take to supply effective continuity of lockingstatestate, is discussed in <xreftarget="SEC11-trans-client"/>. </t> <t>target="SEC11-trans-client" format="default"/>. </li> <li> Theservers' (sourcesource anddestination)destination servers' responsibilities in effecting Transparent State Migration of locking and session state are discussed in <xreftarget="SEC11-trans-server"/>. </t> </list> </t> <section title="Filetarget="SEC11-trans-server" format="default"/>. </li> </ul> <section anchor="SEC11-EFF-simul" numbered="true" toc="default"> <name>File System Transitions and SimultaneousAccess" anchor="SEC11-EFF-simul">Access</name> <t> The fs_locations_info attribute (described in <xreftarget="SEC11-li-new"/>)target="SEC11-li-new" format="default"/>) may indicate that two replicas may be used simultaneously, although some situations in which such simultaneous access is permitted are more appropriately described as instances of trunking (see <xreftarget="SEC11-USES-repl-trunk"/>).target="SEC11-USES-repl-trunk" format="default"/>). Although situations in which multiple replicas may be accessed simultaneously are somewhat similar to those in which a single replica is accessed by multiple network addresses, there are importantdifferences,differences since locking state is not shared among multiple replicas. </t> <t> Because of this difference in state handling, many clients will not have the ability to take advantage of the fact that such replicas represent the same data. Such clients will not be prepared to use multiple replicas simultaneously but will access each file system using only a single replica, although the replica selected might make multiple server-trunkable addresses available. </t> <t> Clients who are prepared to use multiple replicas simultaneouslywillcan divide opens among replicas however they choose. Once that choice is made, any subsequent transitions will treat the set of locking state associated with each replica as a single entity. </t> <t> For example, if one of the replicas become unavailable, access will be transferred to a different replica, which is also capable of simultaneous access with the one still in use. </t> <t> When there is no such replica, the transition may be to the replica already in use. At this point, the client has a choice between merging the locking state for the two replicas under the aegis of the sole replica in use or treating theseseparately,separately until another replica capable of simultaneous access presents itself. </t> </section> <sectiontitle="Filehandlesanchor="SEC11-EFF-fh" numbered="true" toc="default"> <name>Filehandles and File SystemTransitions" anchor="SEC11-EFF-fh">Transitions</name> <t> There are a number of ways in which filehandles can be handled across a file system transition. These can be divided into two broad classes depending upon whether the two file systems across which the transition happens share sufficient state to effect some sort of continuity of file system handling. </t> <t> When there is no such cooperation in filehandle assignment, the two file systems are reported as being in different handle classes. In this case, all filehandles are assumed to expire as part of the file system transition. Note that this behavior does not depend on the fh_expire_type attribute and supersedes the specification of the FH4_VOL_MIGRATION bit, which only affects behavior when fs_locations_info is not available. </t> <t> When there is cooperation in filehandle assignment, the two file systems are reported as being in the same handle classes. In this case, persistent filehandles remain valid after the file system transition, while volatile filehandles (excluding those that are only volatile due to the FH4_VOL_MIGRATION bit) are subject to expiration on the target server. </t> </section> <sectiontitle="Fileidsanchor="SEC11-EFF-fileid" numbered="true" toc="default"> <name>Fileids and File SystemTransitions" anchor="SEC11-EFF-fileid">Transitions</name> <t> In NFSv4.0, the issue of continuity of fileids in the event of a file system transition was not addressed. The general expectation had been that in situations in which the two file system instances are created by a single vendor using some sort of file system image copy, fileids would be consistent across the transition, while in the analogous multi-vendor transitions they would not. This poses difficulties, especially for the client without special knowledge of the transition mechanisms adopted by the server. Note that although fileid is not aREQUIRED<bcp14>REQUIRED</bcp14> attribute, many servers support fileids and many clients provide APIs that depend on fileids. </t> <t> It is important to note that while clients themselves may have no trouble with a fileid changing as a result of a file system transition event, applications do typically have access to the fileid (e.g., via stat). The result is that an application may work perfectly well if there is no file system instance transition or if any such transition is among instances created by a single vendor, yet be unable to deal with the situation in which a multi-vendor transition occurs at the wrong time. </t> <t> Providing the same fileids in a multi-vendor (multiple server vendors) environment has generally been held to be quite difficult. While there is work to be done, it needs to be pointed out that this difficulty is partly self-imposed. Servers have typically identified fileid with inode number, i.e. with a quantity used to find the file in question. This identification poses special difficulties for migration of a file system between vendors where assigning the same index to a given file may not be possible. Note here that a fileid is not required to be useful to find the file in question, only that it is unique within the given file system. Servers prepared to accept a fileid as a single piece of metadata and store it apart from the value used to index the file information can relatively easily maintain a fileid value across a migration event, allowing a truly transparent migration event. </t> <t> In any case, where servers can provide continuity of fileids, they should, and the client should be able to find out that such continuity is available and take appropriate action. Information about the continuity (or lack thereof) of fileids across a file system transition is represented by specifying whether the file systems in question are of the same fileid class. </t> <t> Note that when consistent fileids do not exist across a transition (either because there is no continuity of fileids or because fileid is not a supported attribute on one of instances involved), and there are no reliable filehandles across a transition event (either because there is no filehandle continuity or because the filehandles are volatile), the client is in a position where it cannot verify that files it was accessing before the transition are the same objects. It is forced to assume that no object has been renamed, and, unless there are guarantees that provide this (e.g., the file system is read-only), problems for applications may occur. Therefore, use of such configurations should be limited to situations where the problems that this may cause can be tolerated. </t> </section> <sectiontitle="Fsidsanchor="SEC11-EFF-fsid" numbered="true" toc="default"> <name>Fsids and File SystemTransitions" anchor="SEC11-EFF-fsid">Transitions</name> <t> Since fsids are generally only unique on a per-server basis, it is likely that they will change during a file system transition. Clients should not make the fsids received from the server visible to applications since they may not be globally unique, and because they may change during a file system transition event. Applications are best served if they are isolated from such transitions to the extent possible. </t> <t> Although normally a single source file system will transition to a single target file system, there is a provision for splitting a single source file system into multiple target file systems, by specifying the FSLI4F_MULTI_FS flag. </t> <section anchor="SEC11-EFF-fsid-split"title="Filenumbered="true" toc="default"> <name>File SystemSplitting">Splitting</name> <t> When a file system transition is made and the fs_locations_info indicates that the file system in question might be split into multiple file systems (via the FSLI4F_MULTI_FS flag), the clientSHOULD<bcp14>SHOULD</bcp14> do GETATTRs to determine the fsid attribute on all known objects within the file system undergoing transition to determine the new file system boundaries. </t> <t> Clients might choose to maintain the fsids passed to existing applications by mapping all of the fsids for the descendant file systems to the common fsid used for the original file system. </t> <t> Splitting a file system can be done on a transition between file systems of the same fileid class, since the fact that fileids are unique within the source file system ensure they will be unique in each of the target file systems. </t> </section> </section> <section anchor="SEC11-EFF-change"title="Thenumbered="true" toc="default"> <name>The Change Attribute and File SystemTransitions">Transitions</name> <t> Since the change attribute is defined as a server-specific one, change attributes fetched from one server are normally presumed to be invalid on another server. Such a presumption is troublesome since it would invalidate all cached change attributes, requiring refetching. Even more disruptive, the absence of any assured continuity for the change attribute means that even if the same value is retrieved on refetch, no conclusions can be drawn as to whether the object in question has changed. The identical change attribute could be merely an artifact of a modified file with a different change attribute construction algorithm, with that new algorithm just happening to result in an identical change value. </t> <t> When the two file systems have consistent change attribute formats, and this fact is communicated to the client by reporting in the same change class, the client may assume a continuity of change attribute construction and handle this situation just as it would be handled without any file system transition. </t> </section> <section anchor="SEC11-EFF-wv"title="Writenumbered="true" toc="default"> <name>Write Verifiers and File SystemTransitions">Transitions</name> <t> In a file system transition, the two file systems might be cooperating in the handling of unstably written data. Clients can determine if this is thecase,case by seeing if the two file systems belong to the same write-verifier class. When this is the case, write verifiers returned from one system may be compared to those returned by the other and superfluous writes can be avoided. </t> <t> When two file systems belong to different write-verifier classes, any verifier generated by one must not be compared to one provided by the other. Instead, the two verifiers should be treated as not equal even when the values are identical. </t> </section> <section anchor="SEC11-EFF-rdc"title="Readdirnumbered="true" toc="default"> <name>READDIR Cookies and Verifiers and File SystemTransitions">Transitions</name> <t> In a file system transition, the two file systems might be consistent in their handling of READDIR cookies and verifiers. Clients can determine if this is thecase,case by seeing if the two file systems belong to the same readdir class. When this is the case, readdir class, READDIRcookiescookies, and verifiers from one system will be recognized by theotherother, and READDIR operations started on one server can be validly continued on theother,other simply by presenting the cookie and verifier returned by a READDIR operation done on the first file system to the second. </t> <t> When two file systems belong to different readdir classes, any READDIR cookie and verifier generated by one is not valid on thesecond,second and must not be presented to that server by the client. The client should act as if the verifier were rejected. </t> </section> <section anchor="SEC11-EFF-data"title="Filenumbered="true" toc="default"> <name>File System Data and File SystemTransitions">Transitions</name> <t> When multiple replicas exist and are used simultaneously or in succession by a client, applications using them will normally expect that they contain either the same data or data that is consistent with the normal sorts of changes that are made by other clients updating the data of the file system (with metadata being the same to the degree indicated by the fs_locations_info attribute). However, when multiple file systems are presented as replicas of one another, the precise relationship between the data of one and the data of another is not, as a general matter, specified by the NFSv4.1 protocol. It is quite possible to present as replicas file systems where the data of those file systems is sufficiently different that some applications have problems dealing with the transition between replicas. The namespace will typically be constructed so that applications can choose an appropriate level of support, so that in one position in thenamespacenamespace, a varied set of replicas might be listed, while inanotheranother, only those that are up-to-date would be considered replicas. The protocol does define three special cases of the relationship among replicas to be specified by the server and relied upon by clients:<list style='symbols'> <t></t> <ul spacing="normal"> <li> When multiple replicas exist and are used simultaneously by a client (see the FSLIB4_CLSIMUL definition within fs_locations_info), they must designate the same data. Where file systems are writable, a change made on one instance must be visible on all instances at the same time, regardless of whether the interrogated instance is the one on which the modification was done. This allows a client to use these replicas simultaneously without any special adaptation to the fact that there are multiple replicas, beyond adapting to the fact that locks obtained on one replica are maintained separately(i.e.(i.e., under a different client ID). In this case, locks (whether share reservations or byte-range locks) and delegations obtained on one replica are immediately reflected on all replicas, in the sense that access from all other servers is prevented regardless of the replica used. However, because the servers are not required to treat two associated client IDs as representing the same client, it is best to access each file using only a single client ID.</t> <t></li> <li> When one replica is designated as the successor instance to another existing instance after the return of NFS4ERR_MOVED (i.e., the case of migration), the client may depend on the fact that all changes written to stable storage on the original instance are written to stable storage of the successor (uncommitted writes are dealt with in <xref target="SEC11-EFF-wv"/>format="default"/> above).</t> <t></li> <li> Where a file system is not writable but represents a read-only copy (possibly periodically updated) of a writable file system, clients have similar requirements with regard to the propagation of updates. They may need a guarantee that any change visible on the original file system instance must be immediately visible on any replica before the client transitions access to that replica, in order to avoid any possibility that a client, in effecting a transition to a replica, will see any reversion in file system state. The specific means of this guarantee varies based on the value of the fss_type field that is reported as part of the fs_status attribute (see <xref target="fs_status"/>).format="default"/>). Since these file systems are presumed to be unsuitable for simultaneous use, there is no specification of how locking is handled; in general, locks obtained on one file system will be separate from those on others. Since these are expected to be read-only file systems, this is not likely to pose an issue for clients or applications.</t> </list> </t></li> </ul> <t> When none of these special situationsapply,applies, there is nobasis,basis within the protocol for the client to make assumptions about the contents of a replica file system or its relationship to previous file system instances.ThusThus, switching between nominally identical read-write file systems would not bepossible,possible because either the client does not use the fs_locations_info attribute, or the server does not supportthe fs_locations_info attribute.it. </t> </section> <sectiontitle="Lockanchor="SEC11-EFF-lock" numbered="true" toc="default"> <name>Lock State and File SystemTransitions" anchor="SEC11-EFF-lock">Transitions</name> <t> While accessing a file system, clients obtain locks enforced by theserverserver, which may prevent actions by other clients that are inconsistent with those locks. </t> <t> When access is transferred between replicas, clients need to be assured that the actions disallowed by holding these locks cannot have occurred during the transition. This can be ensured by the methods below. Unless at least one of these is implemented, clients will not be assured of continuity of lock possession across a migrationevent. <list style="symbols">event: </t> <ul spacing="normal"> <li> <t> Providing the client an opportunity to re-obtain his locks via a per-fs grace period on the destination server, denying all clients using the destination file system the opportunity to obtain new locks that conflictwhichwith those held by the transferred client as long as that client has not completed its per-fs grace period. Because the lock reclaim mechanism was originally defined to support server reboot, it implicitly assumes thatfile handlesfilehandles will, upon reclaim,willbe the same as those at open. In the case of migration, this requires that source and destination servers use the same filehandles, as evidenced by using the same server scope (see <xreftarget="Server_Scope"/>)target="Server_Scope" format="default"/>) or by showing this agreement using fs_locations_info (see <xreftarget="SEC11-EFF-fh"/>target="SEC11-EFF-fh" format="default"/> above).<vspace blankLines="1"/></t> <t> Note that such a grace period can be implemented without interfering with the ability of non-transferred clients to obtain new locks while it is going on. As long as the destination server is aware of the transferred locks, it can distinguish requests to obtain new locks that contrast with existing locks from those that do not, allowing it to treat such client requests without reference to the ongoing grace period. </t><t></li> <li> Locking state can be transferred as part of the transition by providing Transparent State Migration as described in <xreftarget="SEC11-trans-locking"/>. </t> </list> </t>target="SEC11-trans-locking" format="default"/>. </li> </ul> <t> Of these, Transparent State Migration provides the smoother experience for clients in that there is no need to go through a reclaim process before new locks can beobtained. However,obtained; however, it requires a greater degree of inter-serverco-ordination.coordination. In general, the servers taking part in migration are free to provide either facility. However, when the filehandles can differ across the migration event, Transparent State Migration is the only available means of providing the needed functionality. </t> <t> It should be noted that these two methods are not mutually exclusive and that a server might well provide both. In particular, if there is some circumstance preventing a specific lock from being transferred transparently, the destination server can allow it to bereclaimed,reclaimed by implementing a per-fs grace period for the migrated file system. </t> <sectiontitle="Securityanchor="SEC11-EFF-lock-sc" numbered="true" toc="default"> <name>Security Consideration Related to Reclaiming Lock State after File SystemTransitions" anchor="SEC11-EFF-lock-sc">Transitions</name> <t> Although it is possible for a client reclaiming state to misrepresent itsstate,state in the same fashion as described in <xreftarget="reclaim_security_considerations"/>,target="reclaim_security_considerations" format="default"/>, most implementations providing for such reclamation in the case of file system transitions will have the ability to detect such misrepresentations. This limits the ability of unauthenticated clients to execute denial-of-service attacks in these circumstances. Nevertheless, the rules stated in <xreftarget="reclaim_security_considerations"/>,target="reclaim_security_considerations" format="default"/> regarding principal verification for reclaimrequests,requests apply in this situation as well. </t> <t> Typically, implementations that support file system transitions will have extensive information about the locks to be transferred. This isbecause: <list style="symbols"> <t>because of the following: </t> <ul spacing="normal"> <li> Since failure is not involved, there is no needstoreto store locking information in persistent storage.</t> <t></li> <li> There is no need, as there is in the failure case, to update multiple repositories containing locking state to keep them in sync. Instead, there is a one-time communication of locking state from the source to the destination server.</t> <t></li> <li> Providing this information avoids potential interference with existing clients using the destination filesystem,system by denying them the ability to obtain new locks during the grace period.</t> </list> </t></li> </ul> <t> When such detailed locking information, not necessarily including the associated stateids, is available:<list style="symbols"> <t></t> <ul spacing="normal"> <li> It is possible to detect reclaim requests that attempt to reclaim locks that did not exist before the transfer, rejecting them with NFS4ERR_RECLAIM_BAD (<xreftarget="err_RECLAIM_BAD"/>). </t> <t>target="err_RECLAIM_BAD" format="default"/>). </li> <li> It is possible when dealing with non-reclaim requests, to determine whether they conflict with existing locks, eliminating the need to return NFS4ERR_GRACE((<xref target="err_GRACE"/>)(<xref target="err_GRACE" format="default"/>) on non-reclaim requests.</t> </list> </t></li> </ul> <t> It is possible for implementations of grace periods in connection with file system transitions not to have detailed locking information available at the destination server, in whichcasecase, the security situation is exactly as described in <xreftarget="reclaim_security_considerations"/>.target="reclaim_security_considerations" format="default"/>. </t> </section> <section anchor="transferred_lease"title="Leasesnumbered="true" toc="default"> <name>Leases and File SystemTransitions">Transitions</name> <t> In the case of lease renewal, the client may not be submitting requests for a file system that has been transferred to another server. This can occur because of the lease renewal mechanism. The client renews the lease associated with all file systems when submitting a request on an associated session, regardless of the specific file system being referenced. </t> <t> In order for the client to schedule renewal of its lease where there is locking state that may have been relocated to the new server, the client must find out about lease relocation before that lease expire. To accomplish this, the SEQUENCE operation will return the status bit SEQ4_STATUS_LEASE_MOVED if responsibility for any of the renewed locking state has been transferred to a new server. This will continue until the client receives an NFS4ERR_MOVED error for each of the file systems for which there has been locking state relocation. </t> <t> When a client receives an SEQ4_STATUS_LEASE_MOVED indication from a server, for each file system of the server for which the client has locking state, the client should perform an operation. For simplicity, the client may choose to reference all file systems, but what is important is that it must reference all file systems for which there was locking state where that state has moved. Once the client receives an NFS4ERR_MOVED error for each such file system, the server will clear the SEQ4_STATUS_LEASE_MOVED indication. The client can terminate the process of checking file systems once this indication is cleared (but only if the client has received a reply for all outstanding SEQUENCE requests on all sessions it has with the server), since there are no others for which locking state has moved. </t> <t> A client may use GETATTR of the fs_status (or fs_locations_info) attribute on all of the file systems to get absence indications in a single (or a few) request(s), since absent file systems will not cause an error in this context. However, it still must do an operation that receives NFS4ERR_MOVED on each file system, in order to clear the SEQ4_STATUS_LEASE_MOVED indication. </t> <t> Once the set of file systems with transferred locking state has been determined, the client can follow the normal process to obtain the new server information (through the fs_locations and fs_locations_info attributes) and perform renewal of that lease on the new server, unless information in the fs_locations_info attribute shows that no state could have been transferred. If the server has not had state transferred to it transparently, the client will receive NFS4ERR_STALE_CLIENTID from the new server, as described above, and the client can then reclaim locks as is done in the event of server failure. </t> </section> <section anchor="transition_lease_time"title="Transitionsnumbered="true" toc="default"> <name>Transitions and the Lease_timeAttribute">Attribute</name> <t> In order that the client may appropriately manage its lease in the case of a file system transition, the destination server must establish proper values for the lease_time attribute. </t> <t> When state is transferred transparently, that state should include the correct value of the lease_time attribute. The lease_time attribute on the destination server must never be less than that on the source, since this would result in premature expiration of a lease granted by the source server. Upon transitions in which state is transferred transparently, the client is under no obligation to refetch the lease_time attribute and may continue to use the value previously fetched (on the source server). </t> <t> If state has not been transferred transparently, either because the associated servers are shown as having different eir_server_scope strings or because the client ID is rejected when presented to the new server, the client should fetch the value of lease_time on the new (i.e., destination) server, and use it for subsequent locking requests. However, the server must respect a grace period of at least as long as the lease_time on the source server, in order to ensure that clients have ample time to reclaim their lock before potentially conflicting non-reclaimed locks are granted. </t> </section> </section> </section> <sectiontitle="Transferringanchor="SEC11-trans-locking" numbered="true" toc="default"> <name>Transferring State uponMigration" anchor="SEC11-trans-locking">Migration</name> <t> When the transition is a result of a server-initiated decision to transitionaccessaccess, and the source and destination servers have implemented appropriateco-operation,cooperation, it is possibleto: <list style="symbols"> <t>to do the following: </t> <ul spacing="normal"> <li> Transfer locking state from the source to the destinationserver,server in a fashion similar to that provided by Transparent State Migration in NFSv4.0, as described in <xreftarget="RFC7931"/>.target="RFC7931" format="default"/>. Server responsibilities are described in <xreftarget="SEC11-XS-lock"/>. </t> <t>target="SEC11-XS-lock" format="default"/>. </li> <li> Transfer session state from the source to the destination server. Server responsibilities in effecting such a transfer are described in <xreftarget="SEC11-XS-session"/>. </t> </list> </t>target="SEC11-XS-session" format="default"/>. </li> </ul> <t> The means by which the client determines which of these transfer events has occurred are described in <xreftarget="SEC11-trans-client"/>.target="SEC11-trans-client" format="default"/>. </t> <sectiontitle="Transparentanchor="V41p-pnfs" numbered="true" toc="default"> <name>Transparent State Migration andpNFS" anchor="V41p-pnfs">pNFS</name> <t> When pNFS is involved, the protocol is capable of supporting:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> Migration of the Metadata Server (MDS), leaving the Data Servers(DS's)(DSs) in place.</t> <t></li> <li> Migration of the file system as a whole, including the MDS and associatedDS's. </t> <t>DSs. </li> <li> Replacement of one DS by another.</t> <t></li> <li> Migration of a pNFS file system to one in which pNFS is not used.</t> <t></li> <li> Migration of a file system not using pNFS to one in which layouts are available.</t> </list> </t></li> </ul> <t> Note thatmigrationmigration, persese, is only involved in the transfer of the MDS function. Although the servicing of a layout may be transferred from one data server to another, this not done using the file system location attributes. The MDS can effect such transfers byrecalling/revokingrecalling or revoking existing layouts and granting new ones on a different data server. </t> <t> Migration of the MDS function is directly supported by Transparent State Migration. Layout state will normally be transparently transferred, just as other state is. As a result, Transparent State Migration provides a framework in which, given appropriate inter-MDS data transfer, one MDS can be substituted for another. </t> <t> Migration of the file system function as a whole can be accomplished by recalling all layouts as part of the initial phase of the migration process. As a result,IOI/O will be done through the MDS during the migration process, and new layouts can be granted once the client is interacting with the new MDS. An MDS can also effect this sort of transition by revoking all layouts as part of Transparent State Migration, as long as the client is notified about the loss of locking state. </t> <t> In order to allow migration to a file system on which pNFS is not supported, clients need to be prepared for a situation in which layouts are not available or supported on the destination file system and so directIOI/O requests to the destination server, rather than depending on layouts being available. </t> <t> Replacement of one DS by another is not addressed by migration as such but can be effected by an MDS recalling layouts for the DS to be replaced and issuing new ones to be served by the successor DS. </t> <t> Migration may transfer a file system from a serverwhichthat does not support pNFS to onewhichthat does. In order to properly adapt to this situation, clientswhichthat support pNFS, but function adequately in itsabsenceabsence, should check for pNFS support when a file system is migrated and be prepared to use pNFS when support is available on the destination. </t> </section> </section> <sectiontitle="Clientanchor="SEC11-trans-client" numbered="true" toc="default"> <name>Client ResponsibilitieswhenWhen Accessis Transitioned" anchor="SEC11-trans-client">Is Transitioned</name> <t> For a client to respond to an access transition, it must become aware of it. The ways in which this can happen are discussed in <xreftarget="V41c-clrecov"/>target="V41c-clrecov" format="default"/>, which discusses indications that a specific file system access path has transitioned as well as situations in which additional activity is necessary to determine the set of file systems that have been migrated. <xreftarget="V41c-migrdisc"/>target="V41c-migrdisc" format="default"/> goes on to complete the discussion of how the set of migrated file systems might be determined. Sections <xref target="V41c-omoved" format="counter"/> through <xref target="V41c-ssnwas" format="counter"/> discuss how the client should deal with each transition it becomes aware of, either directly or as a result of migration discovery. </t> <t> The following terms are used to describe client activities:<list style="symbols"> <t></t> <ul spacing="normal"> <li> "Transition recovery" refers to the process of restoring access to a file system on which NFS4ERR_MOVED was received.</t> <t></li> <li> "Migration recovery" refers to that subset of transition recoverywhichthat applies when the file system has migrated to a different replica.</t> <t></li> <li> "Migration discovery" refers to the process of determining which file system(s) have been migrated. It is necessary to avoid a situation in which leases could expire when a file system is not accessed for a long period of time, since a client unaware of the migration might be referencing an unmigrated file system and not renewing the lease associated with the migrated file system.</t> </list> </t></li> </ul> <sectiontitle="Clientanchor="V41c-clrecov" numbered="true" toc="default"> <name>Client TransitionNotifications" anchor="V41c-clrecov">Notifications</name> <t> When there is a change in the network access pathwhichthat a client is to use to access a file system, there are a number of related status indications with which clients need to deal:<list style ='symbols'></t> <ul spacing="normal"> <li> <t> If an attempt is made to use or return a filehandle within a file system that is no longer accessible at the address previously used to access it, the error NFS4ERR_MOVED is returned.<vspace blankLines='1' /></t> <t> Exceptions are made to allow suchfile handlesfilehandles to be used when interrogating a file system location attribute. This enables a client to determine a new replica's location or a new network access path.<vspace blankLines='1' /></t> <t> This condition continues on subsequent attempts to access the file system in question. The only way the client can avoid the error is to cease accessing the file system in question at its old server location and access it instead using a different address at which it is now available. </t> </li> <li> <t> Whenever a client sends a SEQUENCE operationis sent by a clientto a serverwhichthat generated state held on that clientwhich isand associated with a file systemthat isno longer accessible onthe server at which it was previously available,that server, the response will containa lease-migrated indication, withtheSEQ4_STATUS_LEASE_MOVEDstatus bitbeing set. <vspace blankLines='1' />SEQ4_STATUS_LEASE_MOVED, indicating that there has been a lease migration. </t> <t> This condition continues until the client acknowledges the notification by fetching a file system location attribute for the file system whose network access path is being changed. When there are multiple such file systems, a location attribute for each such file system needs to be fetched. The location attribute for all migrated filesystemsystems needs to be fetched in order to clear the condition. Even after the condition is cleared, the client needs to respond by using the location information to access the file system at its new location to ensure that leases are not needlessly expired. </t></list> </t></li> </ul> <t> Unlikethe case ofNFSv4.0, in which the corresponding conditions are both errors and thus mutually exclusive, in NFSv4.1 the client can, and often will, receive both indications on the same request. As a result, implementations need to address the question of how toco-ordinatecoordinate the necessary recovery actions when both indications arrive in the response to the same request. It should be noted that when processing an NFSv4 COMPOUND, the server will normally decide whether SEQ4_STATUS_LEASE_MOVED is to be set before it determines which file system will be referenced or whether NFS4ERR_MOVED is to be returned. </t> <t> Since these indications are not mutually exclusive in NFSv4.1, the following combinations are possible results when a COMPOUND is issued:<list style="symbols"></t> <ul spacing="normal"> <li> <t> The COMPOUND status isNFS4ERR_MOVEDNFS4ERR_MOVED, and SEQ4_STATUS_LEASE_MOVED is asserted.<vspace blankLines='1'/></t> <t> In this case, transition recovery is required. While it is possible that migration discovery is needed in addition, it is likely that only the accessed file system has transitioned. In any case, because addressing NFS4ERR_MOVED is necessary to allow the rejected requests to be processed on the target, dealing with it will typically have priority over migration discovery. </t> </li> <li> <t> The COMPOUND status isNFS4ERR_MOVEDNFS4ERR_MOVED, and SEQ4_STATUS_LEASE_MOVED is clear.<vspace blankLines='1'/></t> <t> In this case, transition recovery is also required. It is clear that migration discovery is not needed to find file systems that have been migrated otherthatthan the one returning NFS4ERR_MOVED. Cases in which this result can arise include a referral or a migration for which there is no associated locking state. This can also arise in cases in which an access path transition other than migration occurs within the same server. In such a case, there is no need to set SEQ4_STATUS_LEASE_MOVED, since the lease remains associated with the current server even though the access path has changed. </t> </li> <li> <t> The COMPOUND status is notNFS4ERR_MOVEDNFS4ERR_MOVED, and SEQ4_STATUS_LEASE_MOVED is asserted.<vspace blankLines='1'/></t> <t> In this case, no transition recovery activity is required on the file system(s) accessed by the request. However, to prevent avoidable lease expiration, migration discovery needs to bedonedone. </t> </li> <li> <t> The COMPOUND status is notNFS4ERR_MOVEDNFS4ERR_MOVED, and SEQ4_STATUS_LEASE_MOVED is clear.<vspace blankLines='1'/></t> <t> In this case, neither transition-related activity nor migration discovery is required. </t></list> </t></li> </ul> <t> Note that the specified actions only need to be taken if they are not already going on. For example, when NFS4ERR_MOVED is receivedwhenwhile accessing a file system for which transition recovery is alreadygoing on,occurring, the client merely waits for that recovery to becompletedcompleted, while the receipt of the SEQ4_STATUS_LEASE_MOVED indication only needs to initiate migration discovery for a server if such discovery is not already underway for that server. </t> <t> The fact that a lease-migrated condition does not result in an error in NFSv4.1 has a number of important consequences. In addition to thefact, discussed above,fact that the two indications are not mutually exclusive, as discussed above, there are number of issues that are important in considering implementation of migration discovery, as discussed in <xreftarget="V41c-migrdisc"/>.target="V41c-migrdisc" format="default"/>. </t> <t> Because SEQ4_STATUS_LEASE_MOVED is not an errorcondition",condition, it is possible for file systems whose access paths have not changed to be successfully accessed on a given server even though recovery is necessary for other file systems on the same server. As a result, access cango on while, <list style="symbols"> <t>take place while: </t> <ul spacing="normal"> <li> The migration discovery process isgoing onhappening for that server.</t> <t></li> <li> The transition recovery process isgoing onhappening for other file systems connected to that server.</t> </list> </t></li> </ul> </section> <sectiontitle="Performinganchor="V41c-migrdisc" numbered="true" toc="default"> <name>Performing MigrationDiscovery" anchor="V41c-migrdisc">Discovery</name> <t> Migration discovery can be performed in the same context as transition recovery, allowing recovery for each migrated file system to be invoked as it is discovered. Alternatively, it may be done in a separate migration discovery thread, allowing migration discovery to be done in parallel with one or more instances of transition recovery. </t> <t> In either case, because the lease-migrated indication does not result in anerror.error, other access to file systems on the server can proceed normally, with the possibility that further such indications will be received, raising the issue of how such indications are to be dealt with. Ingeneral, <list style ='symbols'> <t>general: </t> <ul spacing="normal"> <li> No action needs to be taken for such indications received by any threads performing migration discovery, since continuation of that work will address the issue.</t> <t></li> <li> In other cases in which migration discovery is currently being performed, nothing further needs to be done to respond to such lease migration indications, as long as one can be certain that the migration discovery process would deal with those indications. See below for details.</t> <t></li> <li> For such indications received in all other contexts, the appropriate response is to initiate or otherwise provide for the execution of migration discovery for file systems associated with the server IP address returning the indication.</t> </list> </t></li> </ul> <t> This leaves a potential difficulty in situations in which the migration discovery process is near to completion but is still operating. One should not ignore aLEASE_MOVEDSEQ4_STATUS_LEASE_MOVED indication if the migration discovery process is not able to respond to the discovery of additional migrating file systems without additional aid. A further complexity relevant in addressing such situations is that a lease-migrated indication may reflect the server's state at the time the SEQUENCE operation was processed, which may be different from that in effect at the time the response is received. Because new migration events may occur at any time, and because aLEASE_MOVEDSEQ4_STATUS_LEASE_MOVED indication may reflect the situation in effect a considerable time before the indication is received, special care needs to be taken to ensure thatLEASE_MOVEDSEQ4_STATUS_LEASE_MOVED indications are not inappropriately ignored. </t> <t> A useful approach to this issue involves the use of separate externally-visible migration discovery states for each server. Separate values could represent the various possible states for the migration discovery process for a server:<list style="symbols"> <t> non-operation,</t> <ul spacing="normal"> <li> Non-operation, in which migration discovery is not beingperformed </t> <t> normalperformed. </li> <li> Normal operation, in which there is an ongoing scan for migrated file systems.</t> <t> completion/verification</li> <li> Completion/verification of migration discovery processing, in which the possible completion of migration discovery processing needs to be verified.</t> </list> </t></li> </ul> <t> Given that framework, migration discovery processing would proceed asfollows. <list style ='symbols'> <t>follows: </t> <ul spacing="normal"> <li> While in the normal-operation state, the thread performing discovery would fetch, for successive file systems known to the client on the server being worked on, a file system location attribute plus the fs_status attribute.</t> <t></li> <li> If the fs_status attribute indicates that the file system is a migrated one(i.e.(i.e., fss_absent istruetrue, and fss_type !=STATUS4_REFERRAL)STATUS4_REFERRAL), then a migrated file system has been found. In this situation, it is likely that the fetch of the file system location attribute has cleared one of the file systems contributing to the lease-migrated indication.</t> <t></li> <li> In cases in which that happened, the thread cannot know whether the lease-migrated indication has beenclearedcleared, and so it enters the completion/verification state and proceeds to issue a COMPOUND to see if theLEASE_MOVEDSEQ4_STATUS_LEASE_MOVED indication has been cleared.</t> <t></li> <li> When the discovery process is in the completion/verification state, if other requests get a lease-migratedindicationindication, they note that it was received. Later, the existence of such indications is used when the request completes, as described below.</t> </list> </t></li> </ul> <t> When the request used in the completion/verification state completes:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> If a lease-migrated indication is returned, the discovery continues normally. Note that this is so even if all file systems have been traversed, since new migrations could have occurred while the process was going on.</t> <t></li> <li> Otherwise, if there is any record that other requests saw a lease-migrated indication while the request wasgoing on,occurring, that record isclearedcleared, and the verification request is retried. The discovery process remains in the completion/verification state.</t> <t></li> <li> If there have been no lease-migrated indications, the work of migration discovery is consideredcompletedcompleted, and it enters the non-operating state. Once it enters this state, subsequent lease-migratedindicationindications will trigger a new migration discovery process.</t> </list> </t></li> </ul> <t> It should be noted that the process described above is not guaranteed to terminate, as a long series of new migration events might continually delay the clearing of theLEASE_MOVEDSEQ4_STATUS_LEASE_MOVED indication. To prevent unnecessary lease expiration, it is appropriate for clients to use the discovery of migrations to effect lease renewal immediately, rather than waiting for the clearing of theLEASE_MOVEDSEQ4_STATUS_LEASE_MOVED indication when the complete set of migrations is available. </t> <t> Lease discovery needs to be provided as described above. This ensures that the client discovers file system migrations soon enough to renew its leases on each destination server before they expire. Non-renewal of leases can lead to loss of locking state. While the consequences of such loss can be ameliorated through implementations of courtesy locks, servers are under no obligation to do so, and a conflicting lock request may mean that a lock is revoked unexpectedly. Clients should be aware of this possibility. </t> </section> <sectiontitle="Overviewanchor="V41c-omoved" numbered="true" toc="default"> <name>Overview of Client Response toNFS4ERR_MOVED" anchor="V41c-omoved">NFS4ERR_MOVED</name> <t> This section outlines a way in which a client that receives NFS4ERR_MOVED can effect transition recovery by using a new server or server endpoint if one is available. As part of that process, it will determine:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> Whether the NFS4ERR_MOVED indicates migration has occurred, or whether it indicates another sort of file system access transition as discussed in <xreftarget="SEC11-nwa"/>target="SEC11-nwa" format="default"/> above.</t> <t></li> <li> In the case of migration, whether Transparent State Migration has occurred.</t> <t></li> <li> Whether any state has been lost during the process of Transparent State Migration.</t> <t></li> <li> Whether sessions have been transferred as part of Transparent State Migration.</t> </list> </t></li> </ul> <t> During the first phase of this process, the client proceeds to examine file system location entries to find the initial network address it will use to continue access to the file system or its replacement. For each location entry that the client examines, the process consists of five steps:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Performing an EXCHANGE_ID directed at the location address. This operation is used to register the client owner (in the form of a client_owner4) with the server, to obtain a client ID to beuseused subsequently to communicate with it, to obtain that client ID's confirmation status, and to determineserver_ownerserver_owner4 and scope for the purpose of determining if the entry is trunkable withthatthe address previously being used to access the file system(i.e.(i.e., that it represents another network access path to the same file system and can share locking state with it).</t> <t></li> <li> Making an initial determination of whether migration has occurred. The initial determination will be based on whether the EXCHANGE_ID results indicate that the current location element is server-trunkable with that used to access the file system when access was terminated by receiving NFS4ERR_MOVED. If it is, then migration has not occurred. In that case, the transition is dealt with, at least initially, as one involving continued access to the same file system on the same server through a new network address.</t> <t></li> <li> Obtaining access to existing session state or creating new sessions. How this is done depends on the initial determination of whether migration has occurred and can be done as described in <xreftarget="V41c-ssmig"/>target="V41c-ssmig" format="default"/> below in the case of migration or as described in <xreftarget="V41c-ssnwas"/>target="V41c-ssnwas" format="default"/> below in the case of a network address transfer without migration.</t> <t> Verification of</li> <li> Verifying the trunking relationship assumed in step 2 as discussed in <xreftarget="PREP-trunk-verify"/>.target="PREP-trunk-verify" format="default"/>. Although this step will generally confirm the initial determination, it is possible for verification tofail withinvalidate theresult that aninitial determinationthat aof network address shift (without migration)has occurred may be invalidatedand instead determine that migrationdetermined to havehad occurred. There is no need to redo step 3 above, since it will be possible to continue use of the session established already.</t> <t></li> <li> Obtaining access to existing locking state and/orreobtainingre-obtaining it. How this is done depends on the final determination of whether migration has occurred and can be done as described below in <xreftarget="V41c-ssmig"/>target="V41c-ssmig" format="default"/> in the case of migration or as described in <xreftarget="V41c-ssnwas"/>target="V41c-ssnwas" format="default"/> in the case of a network address transfer without migration.</t> </list> </t></li> </ol> <t> Once the initial address has been determined, clients are free to apply an abbreviated process to find additional addresses trunkable with it (clients may seek session-trunkable or server-trunkable addresses depending on whether they supportclientidclient ID trunking). During this later phase of the process, further location entries are examined using the abbreviated procedure specified below:<list style="format %C:"> <t></t> <ol spacing="normal" type="%C:"> <li> Before the EXCHANGE_ID, the fs name of the location entry isexaminedexamined, and if it does not match that currently being used, the entry is ignored.otherwise,Otherwise, one proceeds as specified by step 1 above.</t> <t></li> <li> In the case that the network address is session-trunkable with one usedpreviouslypreviously, a BIND_CONN_TO_SESSION is used to access that session using the new network address. Otherwise, or if the bind operation fails, a CREATE_SESSION is done.</t> <t></li> <li> The verification procedure referred to in step 4 above is used. However, if it fails, the entry is ignored and the next available entry is used.</t> </list> </t></li> </ol> </section> <sectiontitle="Obtaininganchor="V41c-ssmig" numbered="true" toc="default"> <name>Obtaining Access to Sessions and State afterMigration" anchor="V41c-ssmig">Migration</name> <t> In the event that migration has occurred, migration recovery will involve determining whether Transparent State Migration has occurred. This decision is made based on the client ID returned by the EXCHANGE_ID and the reported confirmation status.<list style ='symbols'> <t></t> <ul spacing="normal"> <li> If the client ID is an unconfirmed client ID not previously known to the client, then Transparent State Migration has not occurred.</t> <t></li> <li> If the client ID is a confirmed client ID previously known to the client, then any transferred state would have been merged with an existing client ID representing the client to the destination server. In this state merger case, Transparent State Migration might or might not haveoccurredoccurred, and a determination as to whether it has occurred is deferred until sessions are established and the client is ready to begin state recovery.</t> <t></li> <li> If the client ID is a confirmed client ID not previously known to the client, then the client can conclude that the client ID was transferred as part of Transparent State Migration. In this transferred client ID case, Transparent State Migration hasoccurredoccurred, although some state might have been lost.</t> </list> </t></li> </ul> <t> Once the client ID has been obtained, it is necessary to obtain access to sessions to continue communication with the new server. In any of the cases in which Transparent State Migration has occurred, it is possible that a session was transferred as well. To deal with that possibility, clients can, after doing the EXCHANGE_ID, issue a BIND_CONN_TO_SESSION to connect the transferred session to a connection to the new server. If that fails, it is an indication that the session was not transferred and that a new session needs to be created to take its place. </t> <t> In some situations, it is possible for a BIND_CONN_TO_SESSION to succeed without session migration having occurred. If state merger has takenplaceplace, then the associated client ID may have already had a set of existing sessions, with it being possible that thesessionidsession ID of a given session is the same as one that might have been migrated. In that event, a BIND_CONN_TO_SESSION might succeed, even though there could have been no migration of the session with thatsessionid.session ID. In such cases, the client will receive sequence errors when the slot sequence values used are not appropriate on the new session. When this occurs, the client can create a new a session and cease using the existing one. </t> <t> Once the client has determined the initial migration status, and determined that there was a shift to a new server, it needs to re-establish its locking state, if possible. To enable this to happen without loss of the guarantees normally provided by locking, the destination server needs to implement a per-fs grace period in all cases in which lock state was lost, including those in which Transparent State Migration was not implemented. Each client for which there was a transfer of locking state to the new server will have the duration of the grace period to reclaim its locks, from the time its locks were transferred. </t> <t> Clients need to deal with the following cases:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> In the state merger case, it is possible that the server has not attempted Transparent State Migration, in which case state may have been lost without it being reflected in the SEQ4_STATUS bits. To determine whether this has happened, the client can use TEST_STATEID to check whether the stateids created on the source server are still accessible on the destination server. Once a single stateid is found to have been successfully transferred, the client can conclude that Transparent State Migration wasbegunbegun, and any failure to transport all of the stateids will be reflected in the SEQ4_STATUS bits. Otherwise, Transparent State Migration has not occurred.</t> <t></li> <li> In a case in which Transparent State Migration has not occurred, the client can use the per-fs grace period provided by the destination server to reclaim locks that were held on the source server.</t> <t></li> <li> In a case in which Transparent State Migration has occurred, and no lock state was lost (as shown by SEQ4_STATUS flags), no lock reclaim is necessary.</t> <t></li> <li> In a case in which Transparent State Migration has occurred, and some lock state was lost (as shown by SEQ4_STATUS flags), existing stateids need to be checked for validity using TEST_STATEID, and reclaim used to re-establish any that were not transferred.</t> </list> </t></li> </ul> <t> For all of the cases above, RECLAIM_COMPLETE with an rca_one_fs value of TRUE needs to be done before normal use of the filesystemsystem, including obtaining new locks for the file system. This applies even if no locks were lost and there was no need for any to be reclaimed. </t> </section> <sectiontitle="Obtaininganchor="V41c-ssnwas" numbered="true" toc="default"> <name>Obtaining Access to Sessions and State after Network AddressTransfer" anchor="V41c-ssnwas">Transfer</name> <t> The case in which there is a transfer to a new network address without migration is similar to that described in <xreftarget="V41c-ssmig"/>target="V41c-ssmig" format="default"/> above in that there is a need to obtain access to needed sessions and locking state. However, the details are simpler and will vary depending on the type of trunking between the address receiving NFS4ERR_MOVED and that to which the transfer is to bemademade. </t> <t> To make a session available for use, a BIND_CONN_TO_SESSION should be used to obtain access to the session previously in use. Only if this fails, should a CREATE_SESSION be done. While this procedure mirrors that in <xreftarget="V41c-ssmig"/>target="V41c-ssmig" format="default"/> above, there is an important difference in that preservation of the session is not purely optional but depends on the type of trunking. </t> <t> Access to appropriate locking state will generally need no actions beyond access to the session. However, the SEQ4_STATUS bits need to be checked for lost locking state, including the need to reclaim locks after a server reboot, since there is always a possibility of locking state being lost. </t> </section> </section> <sectiontitle="Serveranchor="SEC11-trans-server" numbered="true" toc="default"> <name>Server Responsibilities UponMigration" anchor="SEC11-trans-server">Migration</name> <t> In the event of file system migration, when the client connects to the destination server, that server needs to be able to provide the client continuedtoaccess to the files it had open on the source server. There are two ways to provide this:<list style="symbols"> <t></t> <ul spacing="normal"> <li> By provision of an fs-specific grace period, allowing the client the ability to reclaim its locks, in a fashion similar to what would have been done in the case of recovery from a server restart. See <xreftarget="SEC11-XS-reclaim"/>target="SEC11-XS-reclaim" format="default"/> for a more complete discussion.</t></li> <li> <t> By implementing Transparent State Migration possibly in connection with session migration, the server can provide the client immediate access to the state built up on the sourceserver,server on thedestination. <vspace blankLines="1"/>destination server. </t> <t> These features are discussed separately in Sections <xref target="SEC11-XS-lock" format="counter"/> and <xref target="SEC11-XS-session" format="counter"/>, which discuss Transparent State Migration and sessionmigrationmigration, respectively. </t></list> </t></li> </ul> <t> All the features described above can involve transfer of lock-related information between source and destination servers. In some cases, this transfer is a necessary part of theimplementationimplementation, while in othercasescases, it is a helpful implementationaidaid, which servers might or might not use. Thesub-sectionssubsections below discuss the informationwhichthat would be transferred but do not define the specifics of the transfer protocol. This is left as an implementationchoicechoice, although standards in this area could be developed at a later time. </t> <sectiontitle="Serveranchor="SEC11-XS-reclaim" numbered="true" toc="default"> <name>Server Responsibilities in Effecting State Reclaim afterMigration" anchor="SEC11-XS-reclaim">Migration</name> <t> In this case, the destination server needs no knowledge of the locks held on the source server. It relies on the clients to accurately report (via reclaim operations) the locks previously held, and does not allow new locks to be granted on migrated file systems until the grace period expires. Disallowing of new locks applies to all clients accessing these filesystem,systems, while grace period expiration occurs for each migrated client independently. </t> <t> During this graceperiodperiod, clients have the opportunity to use reclaim operations to obtain locks for file system objects within the migrated file system, in the same way that they do when recovering from server restart, and the servers typically rely on clients to accurately report their locks, although they have the option of subjecting these requests to verification. If the clients only reclaim locks held on the source server, no conflict can arise. Once the client has reclaimed its locks, it indicates the completion of lock reclamation by performing a RECLAIM_COMPLETE specifying rca_one_fs as TRUE. </t> <t> While it is not necessary for source and destination servers toco-operatecooperate to transfer information about locks, implementations arewell-advisedwell advised to consider transferring the following useful information:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If information about the set of clients that have locking state for the transferred file system is made available, the destination server will be able to terminate the grace period once all such clients have reclaimed their locks, allowing normal locking activity to resume earlier than it would have otherwise.</t> <t></li> <li> Locking summary information for individual clients (at various possible levels of detail) can detect some instances in which clients do not accurately represent the locks held on the source server.</t> </list> </t></li> </ul> </section> <sectiontitle="Serveranchor="SEC11-XS-lock" numbered="true" toc="default"> <name>Server Responsibilities in Effecting Transparent StateMigration" anchor="SEC11-XS-lock">Migration</name> <t> The basic responsibility of the source server in effecting Transparent State Migration is to make available to the destination server a description of each piece of locking state associated with the file system being migrated. In addition to client id string and verifier, the source server needs toprovide,provide for each stateid:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> The stateid including the current sequence value.</t> <t></li> <li> The associated client ID.</t> <t></li> <li> The handle of the associated file.</t> <t></li> <li> The type of the lock, such as open, byte-range lock, delegation, or layout.</t> <t></li> <li> For locks such as opens and byte-range locks, there will be information about the owner(s) of the lock.</t> <t></li> <li> For recallable/revocable lock types, the current recall status needs to be included.</t> <t></li> <li> For each lock type, there will be associated type-specificinformation, such asinformation. For opens, this will include share and denymodes for opens and type and byte rangesmode while for byte-range locks andlayouts. </t> </list> </t>layouts, there will be a type and a byte-range. </li> </ul> <t> Such information will most probably be organized by client id string on the destination server so that it can be used to provide appropriate context to each client when it makes itself known to the client. Issues connected with a client impersonating another by presenting another client's client id string can be addressed using NFSv4.1 state protection features, as described in <xreftarget="SECCON"/>.target="SECCON" format="default"/>. </t> <t> A further server responsibility concerns locks that are revoked or otherwise lost during the process of file system migration. Because locks that appear to be lost during the process of migration will be reclaimed by the client, the servers have to take steps to ensure that locks revoked soon before or soon after migration are not inadvertently allowed to be reclaimed in situations in which the continuity of lock possession cannot be assured.<list style='symbols'> <t></t> <ul spacing="normal"> <li> For locks lost on the source but whose loss has not yet been acknowledged by the client (by using FREE_STATEID), the destination must be aware of this loss so that it can deny a request to reclaim them.</t> <t></li> <li> For locks lost on the destination after the state transfer but before the client'sRECLAIM_COMPLTERECLAIM_COMPLETE is done, the destination server should note these and not allow them to be reclaimed.</t> </list> </t></li> </ul> <t> An additional responsibility of the cooperating servers concerns situations in which a stateid cannot be transferred transparently because it conflicts with an existing stateid held by the client and associated with a different file system. In thiscasecase, there are two valid choices:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> Treat the transfer, as in NFSv4.0, as one without Transparent State Migration. In this case, conflicting locks cannot be granted until the client does a RECLAIM_COMPLETE, after reclaiming the locks it had, with the exception of reclaims denied because they were attempts to reclaim locks that had been lost.</t> <t></li> <li> Implement Transparent State Migration, except for the lock with the conflicting stateid. In this case, the client will be aware of a lost lock (through the SEQ4_STATUS flags) and be allowed to reclaim it.</t> </list> </t></li> </ul> <t> When transferring state between the source and destination, the issues discussed inSection 7.2 of<xreftarget="RFC7931"/>target="RFC7931" sectionFormat="of" section="7.2"/> must still be attended to. In this case, the use of NFS4ERR_DELAY may still be necessary in NFSv4.1, as it was in NFSv4.0, to prevent locking state changing while it is being transferred. See <xreftarget="err_DELAY"/>target="err_DELAY" format="default"/> for information about appropriate client retry approaches in the event that NFS4ERR_DELAY is returned. </t> <t> There are a number of important differences in the NFS4.1 context:<list style ='symbols'> <t></t> <ul spacing="normal"> <li> The absence of RELEASE_LOCKOWNER means that the one case in which an operation could not be deferred by use of NFS4ERR_DELAY no longer exists.</t> <t></li> <li> Sequencing of operations is no longer done using owner-based operation sequences numbers. Instead, sequencing is session-based </t> </list> </t>based. </li> </ul> <t> As a result, when sessions are not transferred, the techniques discussed inSection 7.2 of<xreftarget="RFC7931"/>target="RFC7931" sectionFormat="of" section="7.2"/> are adequate and will not be further discussed. </t> </section> <sectiontitle="Serveranchor="SEC11-XS-session" numbered="true" toc="default"> <name>Server Responsibilities in Effecting SessionTransfer" anchor="SEC11-XS-session">Transfer</name> <t> The basic responsibility of the source server in effecting session transfer is to make available to the destination server a description of the current state of each slot with the session,including: <list style ='symbols'> <t>including the following: </t> <ul spacing="normal"> <li> The last sequence value received for that slot.</t> <t></li> <li> Whether there is cached reply data for the last request executed and, if so, the cached reply.</t> </list> </t></li> </ul> <t> When sessions are transferred, there are a number of issues that pose challenges in terms of making the transferred state unmodifiable during the period it is gathered up and transferred to the destinationserver. <list style ='symbols'> <t>server: </t> <ul spacing="normal"> <li> A single session may be used to access multiple file systems, not all of which are being transferred.</t> <t></li> <li> Requests made on a session may, even if rejected, affect the state of the session by advancing the sequence number associated with the slot used.</t> </list> </t></li> </ul> <t> As a result, when the file system state might otherwise be considered unmodifiable, the client might have any number of in-flight requests, each of which is capable of changing session state, which may be of a number of types:<list style ='numbers'> <t></t> <ol spacing="normal" type="1"> <li> Those requests that were processed on the migrating filesystem,system before migration began.</t> <t></li> <li> Those requestswhich gotthat received the error NFS4ERR_DELAY because the file system being accessed was in the process of being migrated.</t> <t></li> <li> Those requestswhich gotthat received the error NFS4ERR_MOVED because the file system being accessed had been migrated.</t> <t></li> <li> Those requests that accessed the migrating filesystem,system in order to obtain location or status information.</t> <t></li> <li> Those requests that did not reference the migrating file system.</t> </list> </t></li> </ol> <t> It should be noted that the history of any particular slot is likely to include a number of these request classes. In the case in which a sessionwhichthat is migrated is used by file systems other than the one migrated, requests of class 5 may be common and may be the last requestprocessed,processed for many slots. </t> <t> Since session state can change even after the locking state has been fixed as part of the migration process, the session state known to the client could be different from that on the destination server, which necessarily reflects the session state on the sourceserver,server at an earlier time. In deciding how to deal with this situation, it is helpful to distinguish between two sorts of behavioral consequences of the choice of initial sequence IDvalues. <list style ='symbols'>values: </t> <ul spacing="normal"> <li> <t> The error NFS4ERR_SEQ_MISORDERED is returned when the sequence ID in a request is neither equal to the last one seen for the current slot nor the next greater one.<vspace blankLines='1' /></t> <t> In view of the difficulty of arriving at a mutually acceptable value for the correct last sequence value at the point of migration, it may be necessary for the server to show some degree offorbearance,forbearance when the sequence ID is one that would be considered unacceptable if session migration were not involved. </t> </li> <li> <t> Returning the cached reply for a previously executed request when the sequence ID in the request matches the last value recorded for the slot.<vspace blankLines='1' /></t> <t> In the cases in which an error is returned and there is no possibility of any non-idempotent operation having been executed, it may not be necessary to adhere to this as strictly as might be proper if session migration were not involved. For example, the fact that the error NFS4ERR_DELAY was returned may not assist the client in any material way, while the fact that NFS4ERR_MOVED was returned by the source server may not be relevant when the request wasreissued,reissued and directed to the destination server. </t></list> </t></li> </ul> <t> An important issue is that the specification needs to take note of all potential COMPOUNDs, even if they might be unlikely in practice. For example, a COMPOUND is allowed to access multiple file systems and might perform non-idempotent operations in some of them before accessing a file system being migrated. Also, a COMPOUND may return considerable data in theresponse,response before being rejected with NFS4ERR_DELAY or NFS4ERR_MOVED, and may in addition be marked as sa_cachethis. However, note that if the client and server adhere to rules in <xreftarget="err_DELAY"/>,target="err_DELAY" format="default"/>, there is no possibility of non-idempotent operations being spuriously reissued after receiving NFS4ERR_DELAY response. </t> <t> To address these issues, a destination serverMAY<bcp14>MAY</bcp14> do any of the following when implementing sessiontransfer. <list style ='symbols'> <t>transfer: </t> <ul spacing="normal"> <li> Avoid enforcing any sequencing semantics for a particular slot until the client has established the starting sequence for that slot on the destination server.</t> <t></li> <li> For each slot, avoid returning a cached reply returning NFS4ERR_DELAY or NFS4ERR_MOVED until the client has established the starting sequence for that slot on the destination server.</t> <t></li> <li> Until the client has established the starting sequence for a particular slot on the destination server, avoid reporting NFS4ERR_SEQ_MISORDERED or returning a cached replyreturningthat contains either NFS4ERR_DELAY orNFS4ERR_MOVED, where the replyNFS4ERR_MOVED and consists solely of a series of operations where the response is NFS4_OK until the final error.</t> </list> </t></li> </ul> <t> Because of the considerations mentionedaboveabove, including the rules for the handling of NFS4ERR_DELAY included in <xreftarget="err_DELAY"/>,target="err_DELAY" format="default"/>, the destination server can respond appropriately to SEQUENCE operations received from the client by adopting the three policies listed below:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Not responding with NFS4ERR_SEQ_MISORDERED for the initial request on a slot within a transferredsession, sincesession because the destination server cannot be aware of requests made by the client after the server handoff but before the client became aware of the shift. In cases in which NFS4ERR_SEQ_MISORDERED would normally have been reported, the request is to be processednormally,normally as a new request.</t> <t></li> <li> Replying as it would for a retry whenever the sequence matches that transferred by the source server, even though this would not provide retry handling for requests issued after the server handoff, under the assumptionthatthat, when such requests areissuedissued, they will never be responded to in a state-changing fashion, making retry support for them unnecessary.</t> <t></li> <li> Once a non-retry SEQUENCE is received for a given slot, using that as the basis for further sequence checking, with no further reference to the sequence value transferred by thesource.source server.</t> </list> </t></li> </ul> </section> </section> <section anchor="effecting_referrals"title="Effectingnumbered="true" toc="default"> <name>Effecting File SystemReferrals">Referrals</name> <t> Referrals are effected when an absent file system is encountered and one or more alternate locations are made available by the fs_locations or fs_locations_info attributes. The client will typically get an NFS4ERR_MOVED error, fetch the appropriate location information, and proceed to access the file system on a different server, even though it retains its logical position within the original namespace. Referrals differ from migration events in that they happen only when the client has not previously referenced the file system in question (so there is nothing to transition). Referrals can only come into effect when an absent file system is encountered at its root. </t> <t> The examples given in the sections below are somewhat artificial in that an actual client will not typically do a multi-component look up, but will have cached information regarding the upper levels of the name hierarchy. However, these examples are chosen to make the required behavior clear and easy to put within the scope of a small number of requests, without getting into a discussion of the details of how specific clients might choose to cache things. </t> <section anchor="referrals_lookup"title="Referralnumbered="true" toc="default"> <name>Referral Example(LOOKUP)">(LOOKUP)</name> <t> Let us suppose that the following COMPOUND is sent in an environment in which /this/is/the/path is absent from the target server. This may be for a number of reasons. It may be that the file system has moved, or it may be that the target server is functioning mainly, or solely, to refer clients to the servers on which various file systems are located. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH</t> <t></li> <li> LOOKUP "this"</t> <t></li> <li> LOOKUP "is"</t> <t></li> <li> LOOKUP "the"</t> <t></li> <li> LOOKUP "path"</t> <t></li> <li> GETFH</t> <t></li> <li> GETATTR (fsid, fileid, size, time_modify)</t> </list> </t></li> </ul> <t> Under the given circumstances, the following will be the result. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH-->--> NFS_OK. The current fh is now the root of the pseudo-fs.</t> <t></li> <li> LOOKUP "this"-->--> NFS_OK. The current fh is for /this and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "is"-->--> NFS_OK. The current fh is for /this/is and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "the"-->--> NFS_OK. The current fh is for /this/is/the and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "path"-->--> NFS_OK. The current fh is for /this/is/the/path and is within a new, absent file system, but ... the client will never see the value of that fh.</t> <t></li> <li> GETFH-->--> NFS4ERR_MOVED. Fails because current fh is in an absent file system at the start of the operation, and the specification makes no exception for GETFH.</t> <t></li> <li> GETATTR (fsid, fileid, size, time_modify). Not executed because the failure of the GETFH stops processing of the COMPOUND.</t> </list> </t></li> </ul> <t> Given the failure of the GETFH, the client has the job of determining the root of the absent file system and where to find that file system, i.e., the server and path relative to that server's root fh. Note that in this example, the client did not obtain filehandles and attribute information (e.g., fsid) for the intermediate directories, so that it would not be sure where the absent file system starts. It could be the case, for example, that /this/is/the is the root of the moved file system and that the reason that the look up of "path" succeeded is that the file system was not absent on that operation but was moved between the last LOOKUP and the GETFH (since COMPOUND is not atomic). Even if we had the fsids for all of the intermediate directories, we could have no way of knowing that /this/is/the/path was the root of a new file system, since we don't yet have its fsid. </t> <t> In order to get the necessary information, let us re-send the chain of LOOKUPs with GETFHs and GETATTRs to at least get the fsids so we can be sure where the appropriate file system boundaries are. The client could choose to get fs_locations_info at the same time but in most cases the client will have a good guess as to where file system boundaries are (because of where NFS4ERR_MOVED was, and was not, received) making fetching of fs_locations_info unnecessary. </t><t> <list style='hanging'> <t hangText='OP01:'> PUTROOTFH --> NFS_OK </t> <t hangText='- '> Current<dl newline="false" spacing="normal"> <dt>OP01:</dt> <dd><t>PUTROOTFH --> NFS_OK</t> <ul><li>Current fh is root ofpseudo-fs. </t> <t hangText='OP02:'> GETATTR(fsid) --> NFS_OK </t> <t hangText='- '> Justpseudo-fs.</li></ul> </dd> <dt>OP02:</dt> <dd><t>GETATTR(fsid) --> NFS_OK</t> <ul><li>Just for completeness. Normally, clients will know the fsid of the pseudo-fs as soon as they establish communication with aserver. </t> <t hangText='OP03:'> LOOKUPserver.</li></ul> </dd> <dt>OP03:</dt> <dd>LOOKUP "this"--> NFS_OK </t> <t hangText='OP04:'> GETATTR(fsid) --> NFS_OK </t> <t hangText='- '>--> NFS_OK</dd> <dt>OP04:</dt> <dd><t>GETATTR(fsid) --> NFS_OK</t> <ul><li> Get current fsid to see where file system boundaries are. The fsid will be that for the pseudo-fs in this example, so noboundary. </t> <t hangText='OP05:'> GETFH --> NFS_OK </t> <t hangText='- '> Currentboundary.</li></ul> </dd> <dt>OP05:</dt> <dd><t>GETFH --> NFS_OK</t> <ul><li>Current fh is for /this and is withinpseudo-fs. </t> <t hangText='OP06:'> LOOKUPpseudo-fs.</li></ul> </dd> <dt>OP06:</dt> <dd><t>LOOKUP "is"--> NFS_OK </t> <t hangText='- '> Current--> NFS_OK</t> <ul><li>Current fh is for /this/is and is withinpseudo-fs. </t> <t hangText='OP07:'> GETATTR(fsid) --> NFS_OK </t> <t hangText='- '>pseudo-fs.</li></ul> </dd> <dt>OP07:</dt> <dd><t>GETATTR(fsid) --> NFS_OK</t> <ul><li> Get current fsid to see where file system boundaries are. The fsid will be that for the pseudo-fs in this example, so noboundary. </t> <t hangText='OP08:'> GETFH --> NFS_OK </t> <t hangText='- '> Currentboundary.</li></ul> </dd> <dt>OP08:</dt> <dd> <t>GETFH --> NFS_OK</t> <ul><li>Current fh is for /this/is and is withinpseudo-fs. </t> <t hangText='OP09:'> LOOKUPpseudo-fs.</li></ul> </dd> <dt>OP09:</dt> <dd> <t>LOOKUP "the"--> NFS_OK </t> <t hangText='- '>--> NFS_OK</t> <ul><li> Current fh is for /this/is/the and is withinpseudo-fs. </t> <t hangText='OP10:'> GETATTR(fsid) --> NFS_OK </t> <t hangText='- '>pseudo-fs.</li></ul> </dd> <dt>OP10:</dt> <dd> <t>GETATTR(fsid) --> NFS_OK</t> <ul><li> Get current fsid to see where file system boundaries are. The fsid will be that for the pseudo-fs in this example, so noboundary. </t> <t hangText='OP11:'> GETFH --> NFS_OK </t> <t hangText='- '> Currentboundary.</li></ul> </dd> <dt>OP11:</dt> <dd> <t>GETFH --> NFS_OK</t> <ul><li>Current fh is for /this/is/the and is withinpseudo-fs. </t> <t hangText='OP12:'> LOOKUPpseudo-fs.</li></ul> </dd> <dt>OP12:</dt> <dd> <t>LOOKUP "path"--> NFS_OK </t> <t hangText='- '>--> NFS_OK</t> <ul><li> Current fh is for /this/is/the/path and is within a new, absent file system, but... </t> <t hangText='- '>...</li> <li> The client will never see the value of thatfh. </t> <t hangText='OP13:'> GETATTR(fsid,fh.</li></ul> </dd> <dt>OP13:</dt> <dd> <t>GETATTR(fsid, fs_locations_info)--> NFS_OK </t> <t hangText='- '>--> NFS_OK</t> <ul><li> We are getting the fsid to know where the file system boundaries are. In this operation, the fsid will be different than that of the parent directory (which in turn was retrieved in OP10). Note that the fsid we are given will not necessarily be preserved at the new location. That fsid might be different, and in fact the fsid we have for this file system might be a valid fsid of a different file system on that newserver. </t> <t hangText='- '>server.</li> <li> In this particular case, we are pretty sure anyway that what has moved is /this/is/the/path rather than /this/is/the since we have the fsid of the latter and it is that of the pseudo-fs, which presumably cannot move. However, in other examples, we might not have this kind of information to rely on (e.g., /this/is/the might be a non-pseudo file system separate from /this/is/the/path), so we need to have other reliable source information on the boundary of the file system that is moved. If, for example, the file system /this/is had moved, we would have a case of migration rather than referral, and once the boundaries of the migrated file system was clear we could fetchfs_locations_info. </t> <t hangText='- '>fs_locations_info.</li> <li> We are fetching fs_locations_info because the fact that we got an NFS4ERR_MOVED at this point means that it is most likely that this is a referral and we need the destination. Even if it is the case that /this/is/the is a file system that has migrated, we will still need the location information for that filesystem. </t> <t hangText='OP14:'> GETFH --> NFS4ERR_MOVED </t> <t hangText='- '>system.</li></ul></dd> <dt>OP14:</dt> <dd> <t>GETFH --> NFS4ERR_MOVED</t> <ul><li> Fails because current fh is in an absent file system at the start of the operation, and the specification makes no exception for GETFH. Note that this means the server will never send the client a filehandle from within an absent filesystem. </t> </list> </t>system.</li></ul> </dd> </dl> <t> Given the above, the client knows where the root of the absent file system is (/this/is/the/path) by noting where the change of fsid occurred (between "the" and "path"). The fs_locations_info attribute also gives the client the actual location of the absent file system, so that the referral can proceed. The server gives the client the bare minimum of information about the absent file system so that there will be very little scope for problems of conflict between information sent by the referring server and information of the file system's home. No filehandles and very few attributes are present on the referring server, and the client can treat those it receives as transient information with the function of enabling the referral. </t> </section> <section anchor="referrals_readdir"title="Referralnumbered="true" toc="default"> <name>Referral Example(READDIR)">(READDIR)</name> <t> Another context in which a client may encounter referrals is when it does a READDIR on a directory in which some of the sub-directories are the roots of absent file systems. </t> <t> Suppose such a directory is read as follows: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH</t> <t></li> <li> LOOKUP "this"</t> <t></li> <li> LOOKUP "is"</t> <t></li> <li> LOOKUP "the"</t> <t></li> <li> READDIR (fsid, size, time_modify, mounted_on_fileid)</t> </list> </t></li> </ul> <t> In this case, because rdattr_error is not requested, fs_locations_info is not requested, and some of the attributes cannot be provided, the result will be an NFS4ERR_MOVED error on the READDIR, with the detailed results as follows: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH-->--> NFS_OK. The current fh is at the root of the pseudo-fs.</t> <t></li> <li> LOOKUP "this"-->--> NFS_OK. The current fh is for /this and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "is"-->--> NFS_OK. The current fh is for /this/is and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "the"-->--> NFS_OK. The current fh is for /this/is/the and is within the pseudo-fs.</t> <t></li> <li> READDIR (fsid, size, time_modify, mounted_on_fileid)-->--> NFS4ERR_MOVED. Note that the same error would have been returned if /this/is/the had migrated, but it is returned because the directory contains the root of an absent file system.</t> </list> </t></li> </ul> <t> So now suppose that we re-send with rdattr_error: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH</t> <t></li> <li> LOOKUP "this"</t> <t></li> <li> LOOKUP "is"</t> <t></li> <li> LOOKUP "the"</t> <t></li> <li> READDIR (rdattr_error, fsid, size, time_modify, mounted_on_fileid)</t> </list> </t></li> </ul> <t> The results will be: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH-->--> NFS_OK. The current fh is at the root of the pseudo-fs.</t> <t></li> <li> LOOKUP "this"-->--> NFS_OK. The current fh is for /this and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "is"-->--> NFS_OK. The current fh is for /this/is and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "the"-->--> NFS_OK. The current fh is for /this/is/the and is within the pseudo-fs.</t> <t></li> <li> READDIR (rdattr_error, fsid, size, time_modify, mounted_on_fileid)-->--> NFS_OK. The attributes for directory entry with the component named "path" will only contain rdattr_error with the value NFS4ERR_MOVED, together with an fsid value and a value for mounted_on_fileid.</t> </list> </t></li> </ul> <t> Suppose we do another READDIR to get fs_locations_info (although we could have used a GETATTR directly, as in <xref target="referrals_lookup"/>).format="default"/>). </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH</t> <t></li> <li> LOOKUP "this"</t> <t></li> <li> LOOKUP "is"</t> <t></li> <li> LOOKUP "the"</t> <t></li> <li> READDIR (rdattr_error, fs_locations_info, mounted_on_fileid, fsid, size, time_modify)</t> </list> </t></li> </ul> <t> The results would be: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> PUTROOTFH-->--> NFS_OK. The current fh is at the root of the pseudo-fs.</t> <t></li> <li> LOOKUP "this"-->--> NFS_OK. The current fh is for /this and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "is"-->--> NFS_OK. The current fh is for /this/is and is within the pseudo-fs.</t> <t></li> <li> LOOKUP "the"-->--> NFS_OK. The current fh is for /this/is/the and is within the pseudo-fs.</t> <t></li> <li> READDIR (rdattr_error, fs_locations_info, mounted_on_fileid, fsid, size, time_modify)-->--> NFS_OK. The attributes will be as shown below.</t> </list> </t></li> </ul> <t> The attributes for the directory entry with the component named "path" will only contain: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> rdattr_error (value: NFS_OK)</t> <t></li> <li> fs_locations_info</t> <t></li> <li> mounted_on_fileid (value: unique fileid within referring file system)</t> <t></li> <li> fsid (value: unique value within referring server)</t> </list> </t></li> </ul> <t> The attributes for entry "path" will not contain size or time_modify because these attributes are not available within an absent file system. </t> </section> </section> <section anchor="fs_locations"title="Thenumbered="true" toc="default"> <name>The Attributefs_locations">fs_locations</name> <t> The fs_locations attribute is structured in the following way: </t><t> <figure> <artwork><sourcecode type="xdr"><![CDATA[ struct fs_location4 { utf8str_cisserver<>;server<>; pathname4 rootpath; };</artwork> </figure> </t> <t> <figure> <artwork>]]></sourcecode> <sourcecode type="xdr"><![CDATA[ struct fs_locations4 { pathname4 fs_root; fs_location4locations<>;locations<>; };</artwork> </figure> </t>]]></sourcecode> <t> The fs_location4 data type is used to represent the location of a file system by providing a server name and the path to the root of the file system within that server's namespace. When a set of servers have corresponding file systems at the same path within their namespaces, an array of server names may be provided. An entry in the server array is a UTF-8 string and represents one of a traditional DNS host name, IPv4 address, IPv6 address, or a zero-length string. An IPv4 or IPv6 address is represented as a universal address (see <xreftarget="netaddr4"/>target="netaddr4" format="default"/> and <xreftarget="RFC5665"/>),target="RFC5665" format="default"/>), minus the netid, and either with or without the trailing ".p1.p2" suffix that represents the port number. If the suffix is omitted, then the default port, 2049,SHOULD<bcp14>SHOULD</bcp14> be assumed. A zero-length stringSHOULD<bcp14>SHOULD</bcp14> be used to indicate the current address being used for the RPC call. It is not a requirement that all servers that share the same rootpath be listed in one fs_location4 instance. The array of server names is provided for convenience. Servers that share the same rootpath may also be listed in separate fs_location4 entries in the fs_locations attribute. </t> <t> The fs_locations4 data type and the fs_locations attribute each contain an array of such locations. Since the namespace of each server may be constructed differently, the "fs_root" field is provided. The path represented by fs_root represents the location of the file system in the current server's namespace, i.e., that of the server from which the fs_locations attribute was obtained. The fs_root path is meant to aid the client by clearly referencing the root of the file system whose locations are being reported, no matter what object within the current file system the current filehandle designates. The fs_root is simply the pathname the client used to reach the object on the current server (i.e., the object to which the fs_locations attribute applies). </t> <t> When the fs_locations attribute is interrogated and there are no alternate file system locations, the serverSHOULD<bcp14>SHOULD</bcp14> return a zero-length array of fs_location4 structures, together with a valid fs_root. </t> <t> As an example, suppose there is a replicated file system located at two servers (servA and servB). At servA, the file system is located at path /a/b/c. At, servB the file system is located at path /x/y/z. If the client were to obtain the fs_locations value for the directory at /a/b/c/d, it might not necessarily know that the file system's root is located in servA's namespace at /a/b/c. When the client switches to servB, it will need to determine that the directory it first referenced at servA is now represented by the path /x/y/z/d on servB. To facilitate this, the fs_locations attribute provided by servA would have an fs_root value of /a/b/c and two entries in fs_locations. One entry in fs_locations will be for itself (servA) and the other will be for servB with a path of /x/y/z. With this information, the client is able to substitute /x/y/z for the /a/b/c at the beginning of its access path and construct /x/y/z/d to use for the new server. </t> <t> Note that there is no requirement that the number of components in each rootpath be the same; there is no relation between the number of components in rootpath or fs_root, and none of the components in a rootpath and fs_root have to be the same. In the above example, we could have had a third element in the locations array, with server equal to "servC" and rootpath equal to "/I/II", and a fourth element in locations with server equal to "servD" and rootpath equal to "/aleph/beth/gimel/daleth/he". </t> <t> The relationship between fs_root to a rootpath is that the client replaces the pathname indicated in fs_root for the current server for the substitute indicated in rootpath for the new server. </t> <t> For an example of a referred or migrated file system, suppose there is a file system located at serv1. At serv1, the file system is located at /az/buky/vedi/glagoli. The client finds that object at glagoli has migrated (or is a referral). The client gets the fs_locations attribute, which contains an fs_root of /az/buky/vedi/glagoli, and one element in the locations array, with server equal to serv2, and rootpath equal to /izhitsa/fita. The client replaces /az/buky/vedi/glagoli with /izhitsa/fita, and uses the latter pathname on serv2. </t> <t> Thus, the serverMUST<bcp14>MUST</bcp14> return an fs_root that is equal to the path the client used to reach the object to which the fs_locations attribute applies. Otherwise, the client cannot determine the new path to use on the new server. </t> <t> Since the fs_locations attribute lacks information defining various attributes of the various file system choices presented, itSHOULD<bcp14>SHOULD</bcp14> only be interrogated and used when fs_locations_info is not available. When fs_locations is used, information about the specific locations should be assumed based on the following rules. </t> <t> The following rules are general and apply irrespective of the context. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> All listed file system instances should be considered as of the same handle class, if and only if, the current fh_expire_type attribute does not include the FH4_VOL_MIGRATION bit. Note that in the case of referral, filehandle issues do not apply since there can be no filehandles known within the current file system, nor is there any access to the fh_expire_type attribute on the referring (absent) file system.</t> <t></li> <li> All listed file system instances should be considered as of the same fileid class if and only if the fh_expire_type attribute indicates persistent filehandles and does not include the FH4_VOL_MIGRATION bit. Note that in the case of referral, fileid issues do not apply since there can be no fileids known within the referring (absent) file system, nor is there any access to the fh_expire_type attribute.</t> <t></li> <li> All file system instances servers should be considered as of different change classes.</t> </list> </t></li> </ul> <t> For other class assignments, handling of file system transitions depends on the reasons for the transition: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> When the transition is due to migration, that is, the client was directed to a new file system after receiving an NFS4ERR_MOVED error, the target should be treated as being of the same write-verifier class as the source.</t> <t></li> <li> When the transition is due to failover to another replica, that is, the client selected another replica without receiving an NFS4ERR_MOVED error, the target should be treated as being of a different write-verifier class from the source.</t> </list> </t></li> </ul> <t> The specific choices reflect typical implementation patterns for failover and controlled migration, respectively. Since other choices are possible and useful, this information is better obtained by using fs_locations_info. When a server implementation needs to communicate other choices, itMUST<bcp14>MUST</bcp14> support the fs_locations_info attribute. </t> <t> See <xref target="SECCON"/>format="default"/> for a discussion on the recommendations for the security flavor to be used by any GETATTR operation that requests the"fs_locations"fs_locations attribute. </t> </section> <sectiontitle="Theanchor="SEC11-li-new" numbered="true" toc="default"> <name>The Attributefs_locations_info" anchor="SEC11-li-new">fs_locations_info</name> <t> The fs_locations_info attribute is intended as a more functional replacement for the fs_locationsattributeattribute, which will continue to exist and be supported. Clients can use it to get a more complete set of data about alternative file system locations, including additional network paths to access replicas in use and additional replicas. When the server does not support fs_locations_info, fs_locations can be used to get a subset of the data. A server that supports fs_locations_infoMUST<bcp14>MUST</bcp14> support fs_locations as well. </t> <t> There is additional data present infs_locations_info,fs_locations_info that is not available in fs_locations: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> Attribute continuity information. This information will allow a client to select a replica that meets the transparency requirements of the applications accessing the data and to leverage optimizations due to the server guarantees of attribute continuity (e.g., if the change attribute of a file of the file system is continuous between multiple replicas, the client does not have to invalidate the file's cache when switching to a different replica).</t></li> <li> <t> File system identity information that indicates when multiple replicas, from the client's point of view, correspond to the same target file system, allowing them to be used interchangeably, without disruption, as distinct synchronized replicas of the same file data.<vspace blankLines="1"/></t> <t> Note that having two replicas with common identity information is distinct from the case of two (trunked) paths to the same replica. </t><t></li> <li> Information that will bear on the suitability of various replicas, depending on the use that the client intends. For example, many applications need an absolutely up-to-date copy (e.g., those that write), while others may only need access to the most up-to-date copy reasonably available.</t> <t></li> <li> Server-derived preference information for replicas, which can be used to implement load-balancing while giving the client the entire file system list to be used in case the primary fails.</t> </list> </t></li> </ul> <t> The fs_locations_info attribute is structured similarly to the fs_locations attribute. A top-level structure (fs_locations_info4) contains the entire attribute including the root pathname of the file system and an array of lower-level structures that define replicas that share a common rootpath on their respective servers. The lower-level structure in turn (fs_locations_item4) contains a specific pathname and information on one or more individual network access paths. For thatlastlast, lowest level, fs_locations_info has an fs_locations_server4 structure that contains per-server-replica information in addition to the file system location entry. This per-server-replica information includes a nominally opaque array, fls_info, within which specific pieces of information are located at the specific indices listed below. </t> <t> Two fs_location_server4 entries that are within different fs_location_item4 structures are never trunkable, while two entries within in the same fs_location_item4 structure might or might not be trunkable. Two entries that are trunkable will have identical identity information, although, as noted above, the converse is not the case. </t> <t> The attribute will always contain at least a single fs_locations_server entry. Typically, there will be an entry with the FS4LIGF_CUR_REQ flag set, although in the case of a referral there will be no entry with that flag set. </t> <t> It should be noted that fs_locations_info attributes returned by servers for various replicas may differ for various reasons. One server may know about a set of replicas that are not known to other servers. Further, compatibility attributes may differ. Filehandles might be of the same class going from replica A to replica B but not going in the reverse direction. This might happen because the filehandles are the same, but replica B's server implementation might not have provision to note and report that equivalence. </t> <t> The fs_locations_info attribute consists of a root pathname (fli_fs_root, just like fs_root in the fs_locations attribute), together with an array of fs_location_item4 structures. The fs_location_item4 structures in turn consist of a root pathname (fli_rootpath) together with an array (fli_entries) of elements of data type fs_locations_server4, all defined as follows. </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ /* * Defines an individual server access path */ struct fs_locations_server4 { int32_t fls_currency; opaquefls_info<>;fls_info<>; utf8str_cis fls_server; }; /* * Byte indices of items within * fls_info: flag fields, class numbers, * bytes indicating ranks and orders. */ const FSLI4BX_GFLAGS = 0; const FSLI4BX_TFLAGS = 1; const FSLI4BX_CLSIMUL = 2; const FSLI4BX_CLHANDLE = 3; const FSLI4BX_CLFILEID = 4; const FSLI4BX_CLWRITEVER = 5; const FSLI4BX_CLCHANGE = 6; const FSLI4BX_CLREADDIR = 7; const FSLI4BX_READRANK = 8; const FSLI4BX_WRITERANK = 9; const FSLI4BX_READORDER = 10; const FSLI4BX_WRITEORDER = 11; /* * Bits defined within the general flag byte. */ const FSLI4GF_WRITABLE = 0x01; const FSLI4GF_CUR_REQ = 0x02; const FSLI4GF_ABSENT = 0x04; const FSLI4GF_GOING = 0x08; const FSLI4GF_SPLIT = 0x10; /* * Bits defined within the transport flag byte. */ const FSLI4TF_RDMA = 0x01; /* * Defines a set of replicas sharing * a common value of the rootpath * within the corresponding * single-server namespaces. */ struct fs_locations_item4 { fs_locations_server4fli_entries<>;fli_entries<>; pathname4 fli_rootpath; }; /* * Defines the overall structure of * the fs_locations_info attribute. */ struct fs_locations_info4 { uint32_t fli_flags; int32_t fli_valid_for; pathname4 fli_fs_root; fs_locations_item4fli_items<>;fli_items<>; }; /* * Flag bits in fli_flags. */ const FSLI4IF_VAR_SUB = 0x00000001; typedef fs_locations_info4 fattr4_fs_locations_info;</artwork> </figure>]]></sourcecode> <t> As noted above, the fs_locations_info attribute, when supported, may be requested of absent file systems without causing NFS4ERR_MOVED to be returned. It is generally expected that it will be available for both present and absent file systems even if only a single fs_locations_server4 entry is present, designating the current (present) file system, or two fs_locations_server4 entries designating the previous location of an absent file system (the one just referenced) and its successor location. Servers are strongly urged to support this attribute on all file systems if they support it on any file system. </t> <t> The data presented in the fs_locations_info attribute may be obtained by the server in any number of ways, including specification by the administrator or by current protocols for transferring data among replicas and protocols not yet developed. NFSv4.1 only defines how this information is presented by the server to the client. </t> <section anchor="SEC11-fsli-server"title="Thenumbered="true" toc="default"> <name>The fs_locations_server4Structure">Structure</name> <t> The fs_locations_server4 structure consists of the following items in addition to the fls_serverfieldfield, which specifies a network address or set of addresses to be used to access the specified file system. Note that both of these items (i.e., fls_currency andflinfo)fls_info) specify attributes of the file system replica and should not be different when there are multiple fs_locations_server4structures for the same replica,structures, each specifying a network path to the chosen replica, for the same replica. </t> <t> When these values are different in two fs_locations_server4 structures, a client has no basis for choosing one over the other and is best off simply ignoring both entries, whether these entries apply to migration replication or referral. When there are more than two such entries, majority voting can be used to exclude a single erroneous entry from consideration. In the case in which trunking information is provided for a replica currently being accessed, the additional trunked addresses can be ignored while access continues on the address currently being used, even if the entry corresponding to that path might be considered invalid. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> An indication of how up-to-date the file system is (fls_currency) in seconds. This value is relative to the master copy. A negative value indicates that the server is unable to give any reasonably useful value here. A value of zero indicates that the file system is the actual writable data or a reliably coherent and fully up-to-date copy. Positive values indicate how out-of-date this copy can normally be before it is considered for update. Such a value is not a guarantee that such updates will always be performed on the required schedule but instead serves as a hint about how far the copy of the data would be expected to be behind the most up-to-date copy.</t> <t></li> <li> A counted array of one-byte values (fls_info) containing information about the particular file system instance. This data includes general flags, transport capability flags, file system equivalence class information, and selection priority information. The encoding will be discussed below.</t> <t></li> <li> The server string (fls_server). For the case of the replica currently being accessed (via GETATTR), a zero-length stringMAY<bcp14>MAY</bcp14> be used to indicate the current address being used for the RPC call. The fls_server field can also be an IPv4 or IPv6 address, formatted the same way as an IPv4 or IPv6 address in the "server" field of the fs_location4 data type (see <xreftarget="fs_locations"/>). </t> </list> </t>target="fs_locations" format="default"/>). </li> </ul> <t> With the exception of the transport-flag field (at offset FSLI4BX_TFLAGS with the fls_info array), all of this data defined in this specification applies to the replica specified by the entry, ratherthatthan the specific network path used to access it. The classification of data in extensions to this data is discussed below. </t> <t> Data within the fls_info array is in the form of 8-bit data items with constants giving the offsets within the array of various values describing this particular file system instance. This style of definition was chosen, in preference to explicit XDR structure definitions for these values, for a number of reasons. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> The kinds of data in the fls_info array, representing flags, file system classes, and priorities among sets of file systems representing the same data, are such that 8 bits provide a quite acceptable range of values. Even where there might be more than 256 such file system instances, having more than 256 distinct classes or priorities is unlikely.</t> <t></li> <li> Explicit definition of the various specific data items within XDR would limit expandability in that any extension within would require yet another attribute, leading to specification and implementation clumsiness. In the context of the NFSv4 extension model in effect at the time fs_locations_info was designed(i.e.(i.e., that which is described inRFC5661RFC 5661 <xreftarget="RFC5661"/>),target="RFC5661" format="default"/>), this would necessitate a new minor version to effect any Standards Track extension to the data ininfls_info.</t> </list> </t></li> </ul> <t> The set of fls_info data is subject to expansion in a future minorversion,version or in a Standards TrackRFC,RFC within the context of a single minor version. The serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> send and the clientMUST NOT<bcp14>MUST NOT</bcp14> use indices within the fls_info array or flag bits that are not defined in Standards Track RFCs. </t> <t> In light of the new extension model defined inRFC8178RFC 8178 <xreftarget="RFC8178"/>target="RFC8178" format="default"/> and the fact that the individual items within fls_info are not explicitly referenced in the XDR, the following practices should be followed when extending or otherwise changing the structure of the data returned in fls_info within the scope of a single minorversion. <list style='symbols'> <t>version: </t> <ul spacing="normal"> <li> All extensions need to be described by Standards Track documents. There is no need for such documents to be marked as updatingRFC5661RFC 5661 <xreftarget="RFC5661"/>target="RFC5661" format="default"/> or this document.</t> <t></li> <li> It needs to be made clear whether the information in any added data items applies to the replica specified by the entry or to the specific network paths specified in the entry.</t> <t></li> <li> There needs to be a reliable way defined to determine whether the server is aware of the extension. This may be based on the length field of the fls_info array, but it is more flexible to provide fs-scope or server-scope attributes to indicate what extensions are provided.</t> </list> </t></li> </ul> <t> This encoding scheme can be adapted to the specification of multi-byte numeric values, even though none are currently defined. If extensions are made via Standards Track RFCs, multi-byte quantities will be encoded as a range of bytes with a range of indices, with the byte interpreted in big-endian byte order. Further, any such index assignments will be constrained by the need for the relevant quantities not to cross XDR word boundaries. </t> <t> The fls_info array currently contains: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> Two 8-bit flag fields, one devoted to general file-system characteristics and a second reserved for transport-related capabilities.</t> <t></li> <li> Six 8-bit class values that define various file system equivalence classes as explained below.</t> <t></li> <li> Four 8-bit priority values that govern file system selection as explained below.</t> </list> </t></li> </ul> <t> The general file system characteristics flag (at byte index FSLI4BX_GFLAGS) has the following bits defined within it: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> FSLI4GF_WRITABLE indicates that this file system target is writable, allowing it to be selected by clients that may need to write on this file system. When the current file system instance is writable and is defined as of the same simultaneous use class (as specified by the value at index FSLI4BX_CLSIMUL) to which the client was previously writing, then it must incorporate within its data any committed write made on the source file system instance. See <xref target="SEC11-EFF-wv"/>,format="default"/>, which discusses the write-verifier class. While there is no harm in not setting this flag for a file system that turns out to be writable, turning the flag on for a read-only file system can cause problems for clients that select a migration or replication target based on the flag and then find themselves unable to write.</t> <t></li> <li> FSLI4GF_CUR_REQ indicates that this replica is the one on which the request is being made. Only a single server entry may have this flag set and, in the case of a referral, no entry will have it set. Note that this flag might be set even if the request was made on a network access path different from any of those specified in the current entry.</t> <t></li> <li> FSLI4GF_ABSENT indicates that this entry corresponds to an absent file system replica. It can only be set if FSLI4GF_CUR_REQ is set. When both such bits are set, it indicates that a file system instance is not usable but that the information in the entry can be used to determine the sorts of continuity available when switching from this replica to other possible replicas. Since this bit can only be true if FSLI4GF_CUR_REQ is true, the value could be determined using the fs_status attribute, but the information is also made available here for the convenience of the client. An entry with this bit, since it represents a true file system (albeit absent), does not appear in the event of a referral, but only when a file system has been accessed at this location and has subsequently been migrated.</t></li> <li> <t> FSLI4GF_GOING indicates that a replica, while still available, should not be used further. The client, if using it, should make an orderly transfer to another file system instance as expeditiously as possible. It is expected that file systems going out of service will be announced as FSLI4GF_GOING some time before the actual loss of service. It is also expected that the fli_valid_for value will be sufficiently small to allow clients to detect and act on scheduled events, while large enough that the cost of the requests to fetch the fs_locations_info values will not be excessive. Values on the order of ten minutes seem reasonable.<vspace blankLines='1' /></t> <t> When this flag is seen as part of a transition into a new file system, a client might choose to transfer immediately to another replica, or it may reference the current file system and only transition when a migration event occurs. Similarly, when this flag appears as a replica in the referral, clients would likely avoid being referred to this instance whenever there is another choice.<vspace blankLines='1' /></t> <t> This flag, like the other items withinfls_infofls_info, applies to thereplica,replica rather than to a particular path to that replica. When it appears, a transition to a newreplicareplica, rather than to a different path to the same replica, is indicated. </t> </li> <li> <t> FSLI4GF_SPLIT indicates that when a transition occurs from the current file system instance to this one, the replacement may consist of multiple file systems. In this case, the client has to be prepared for the possibility that objects on the same file system before migration will be on different ones after. Note that FSLI4GF_SPLIT is not incompatible with the file systems belonging to the same fileid class since, if one has a set of fileids that are unique within a file system, each subset assigned to a smaller file system after migration would not have any conflicts internal to that file system.<vspace blankLines='1' /></t> <t> A client, in the case of a split file system, will interrogate existing files with which it has continuing connection (it is free to simply forget cached filehandles). If the client remembers the directory filehandle associated with each open file, it may proceed upward using LOOKUPP to find the new file system boundaries. Note that in the event of a referral, there will not be any such files and so these actions will not be performed. Instead, a reference to a portion of the original file system now split off into other file systems will encounter an fsid change and possibly a further referral.<vspace blankLines='1' /></t> <t> Once the client recognizes that one file system has been split into two, it can prevent the disruption of running applications by presenting the two file systems as a single one until a convenient point to recognize the transition, such as a restart. This would require a mapping from the server's fsids to fsids as seen by the client, but this is already necessary for other reasons. As noted above, existing fileids within the two descendant file systems will not conflict. Providing non-conflicting fileids for newly created files on the split file systems is the responsibility of the server (or servers working in concert). The server can encode filehandles such that filehandles generated before the split event can be discerned from those generated after the split, allowing the server to determine when the need for emulating two file systems as one is over.<vspace blankLines='1' /></t> <t> Although it is possible for this flag to be present in the event of referral, it would generally be of little interest to the client, since the client is not expected to have information regarding the current contents of the absent file system. </t></list> </t></li> </ul> <t> The transport-flag field (at byte index FSLI4BX_TFLAGS) contains the following bits related to the transport capabilities of the specific network path(s) specified by theentry.entry: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> FSLI4TF_RDMA indicates that any specified network paths provide NFSv4.1 clients access using an RDMA-capable transport.</t> </list> </t></li> </ul> <t> Attribute continuity and file system identity information are expressed by defining equivalence relations on the sets of file systems presented to the client. Each such relation is expressed as a set of file system equivalence classes. For each relation, a file system has an 8-bit class number. Two file systems belong to the same class if both have identical non-zero class numbers. Zero is treated as non-matching. Most often, the relevant question for the client will be whether a given replica is identical to / continuous with the current one in a given respect, but the information should be available also as to whether two other replicas match in that respect as well. </t> <t> The following fields specify the file system's class numbers for the equivalence relations used in determining the nature of file system transitions. See Sections <xref target="SEC11-trans-oview" format="counter"/> through <xref target="SEC11-trans-server" format="counter"/> and their various subsections for details about how this information is to be used. Servers may assign these values as they wish, so long as file system instances that share the same value have the specified relationship to one another; conversely, file systems that have the specified relationship to one another share a common class value. As each instance entry is added, the relationships of this instance to previously entered instances can be consulted, and if one is found that bears the specified relationship, that entry's class value can be copied to the new entry. When no such previous entry exists, a new value for that byte index (not previously used) can be selected, most likely by incrementing the value of the last class value assigned for that index. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> The field with byte index FSLI4BX_CLSIMUL defines the simultaneous-use class for the file system.</t> <t></li> <li> The field with byte index FSLI4BX_CLHANDLE defines the handle class for the file system.</t> <t></li> <li> The field with byte index FSLI4BX_CLFILEID defines the fileid class for the file system.</t> <t></li> <li> The field with byte index FSLI4BX_CLWRITEVER defines the write-verifier class for the file system.</t> <t></li> <li> The field with byte index FSLI4BX_CLCHANGE defines the change class for the file system.</t> <t></li> <li> The field with byte index FSLI4BX_CLREADDIR defines the readdir class for the file system.</t> </list> </t></li> </ul> <t> Server-specified preference information is also provided via 8-bit values within the fls_info array. The values provide a rank and an order (see below) to be used with separate values specifiable for the cases of read-only and writable file systems. These values are compared for different file systems to establish the server-specified preference, with lower values indicating "more preferred". </t> <t> Rank is used to express a strict server-imposed ordering on clients, with lower values indicating "more preferred". Clients should attempt to use all replicas with a given rank before they use one with a higher rank. Only if all of those file systems are unavailable should the client proceed to those of a higher rank. Because specifying a rank will override client preferences, servers should be conservative about using this mechanism, particularly when the environment is one in which client communication characteristics are neither tightly controlled nor visible to the server. </t> <t> Within a rank, the order value is used to specify the server's preference to guide the client's selection when the client's own preferences are not controlling, with lower values of order indicating "more preferred". If replicas are approximately equal in all respects, clients should defer to the order specified by the server. When clients look at server latency as part of their selection, they are free to use this criterion, but it is suggested that when latency differences are not significant, the server-specified order should guide selection. </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> The field at byte index FSLI4BX_READRANK gives the rank value to be used for read-only access.</t> <t></li> <li> The field at byte index FSLI4BX_READORDER gives the order value to be used for read-only access.</t> <t></li> <li> The field at byte index FSLI4BX_WRITERANK gives the rank value to be used for writable access.</t> <t></li> <li> The field at byte index FSLI4BX_WRITEORDER gives the order value to be used for writable access.</t> </list> </t></li> </ul> <t> Depending on the potential need for write access by a given client, one of the pairs of rank and order values is used. The read rank and order should only be used if the client knows that only reading will ever be done or if it is prepared to switch to a different replica in the event that any write access capability is required in the future. </t> </section> <section anchor="SEC11-fsli-info"title="Thenumbered="true" toc="default"> <name>The fs_locations_info4Structure">Structure</name> <t> The fs_locations_info4 structure, encoding the fs_locations_info attribute, contains the following: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> The fli_flags field, which contains general flags that affect the interpretation of this fs_locations_info4 structure and all fs_locations_item4 structures within it. The only flag currently defined is FSLI4IF_VAR_SUB. All bits in the fli_flags field that are not defined should always be returned as zero.</t> <t></li> <li> The fli_fs_root field, which contains the pathname of the root of the current file system on the current server, just as it does in the fs_locations4 structure.</t> <t></li> <li> An array called fli_items of fs_locations4_item structures, which contain information about replicas of the current file system. Where the current file system is actually present, or has been present, i.e., this is not a referral situation, one of the fs_locations_item4 structures will contain an fs_locations_server4 for the current server. This structure will have FSLI4GF_ABSENT set if the current file system is absent, i.e., normal access to it will return NFS4ERR_MOVED.</t> <t></li> <li> The fli_valid_for field specifies a time in seconds for which it is reasonable for a client to use the fs_locations_info attribute without refetch. The fli_valid_for value does not provide a guarantee of validity since servers can unexpectedly go out of service or become inaccessible for any number of reasons. Clients are well-advised to refetch this information for an actively accessed file system at every fli_valid_for seconds. This is particularly important when file system replicas may go out of service in a controlled way using the FSLI4GF_GOING flag to communicate an ongoing change. The server should set fli_valid_for to a value that allows well-behaved clients to notice the FSLI4GF_GOING flag and make an orderly switch before the loss of service becomes effective. If this value is zero, then no refetch interval is appropriate and the client need not refetch this data on any particular schedule. In the event of a transition to a new file system instance, a new value of the fs_locations_info attribute will be fetched at the destination. It is to be expected that this may have a different fli_valid_for value, which the client should then use in the same fashion as the previous value. Because a refetch of the attribute causes information from all component entries to be refetched, the server will typically provide a low value for this field if any of the replicas are likely to go out of service in a short time frame. Note that, because of the ability of the server to return NFS4ERR_MOVED to trigger the use of different paths, when alternate trunked paths are available, there is generally no need to use low values of fli_valid_for in connection with the management of alternate paths to the same replica.</t> </list> </t></li> </ul> <t> The FSLI4IF_VAR_SUB flag within fli_flags controls whether variable substitution is to be enabled. See <xref target="SEC11-fsli-item"/>format="default"/> for an explanation of variable substitution. </t> </section> <section anchor="SEC11-fsli-item"title="Thenumbered="true" toc="default"> <name>The fs_locations_item4Structure">Structure</name> <t> The fs_locations_item4 structure contains a pathname (in the field fli_rootpath) that encodes the path of the target file system replicas on the set of servers designated by the included fs_locations_server4 entries. The precise manner in which this target location is specified depends on the value of the FSLI4IF_VAR_SUB flag within the associated fs_locations_info4 structure. </t> <t> If this flag is not set, then fli_rootpath simply designates the location of the target file system within each server's single-server namespace just as it does for the rootpath within the fs_location4 structure. When this bit is set, however, component entries of a certain form are subject to client-specific variable substitution so as to allow a degree of namespace non-uniformity in order to accommodate the selection of client-specific file system targets to adapt to different client architectures or other characteristics. </t> <t> When such substitution is in effect, a variable beginning with the string "${" and ending with the string "}" and containing a colon is to be replaced by the client-specific value associated with that variable. The string "unknown" should be used by the client when it has no value for such a variable. The pathname resulting from such substitutions is used to designate the target file system, so that different clients may have different file systems, corresponding to that location in the multi-server namespace. </t> <t> As mentioned above, such substituted pathname variables contain a colon. The part before the colon is to be a DNS domain name, and the part after is to be a case-insensitive alphanumeric string. </t> <t> Where the domain is "ietf.org", only variable names defined in this document or subsequent Standards Track RFCs are subject to such substitution. Organizations are free to use their domain names to create their own sets of client-specific variables, to be subject to such substitution. In cases where such variables are intended to be used more broadly than a single organization, publication of an Informational RFC defining such variables isRECOMMENDED.<bcp14>RECOMMENDED</bcp14>. </t> <t> The variable ${ietf.org:CPU_ARCH} is used to denote that the CPU architecture object files are compiled. This specification does not limit the acceptable values (except that they must be valid UTF-8 strings), but such values as "x86", "x86_64", and "sparc" would be expected to be used in line with industry practice. </t> <t> The variable ${ietf.org:OS_TYPE} is used to denote the operating system, and thus the kernel and library APIs, for which code might be compiled. This specification does not limit the acceptable values (except that they must be valid UTF-8 strings), but such values as "linux" and "freebsd" would be expected to be used in line with industry practice. </t> <t> The variable ${ietf.org:OS_VERSION} is used to denote the operating system version, and thus the specific details of versioned interfaces, for which code might be compiled. This specification does not limit the acceptable values (except that they must be valid UTF-8 strings). However, combinations of numbers and letters with interspersed dots would be expected to be used in line with industry practice, with the details of the version format depending on the specific value of the variable ${ietf.org:OS_TYPE} with which it is used. </t> <t> Use of these variables could result in the direction of different clients to different file systems on the same server, as appropriate to particular clients. In cases in which the target file systems are located on different servers, a single server could serve as a referral point so that each valid combination of variable values would designate a referral hosted on a single server, with the targets of those referrals on a number of different servers. </t> <t> Because namespace administration is affected by the values selected to substitute for various variables, clients should provide convenient means of determining what variable substitutions a client will implement, as well as, where appropriate, providing means to control the substitutions to be used. The exact means by which this will be done is outside the scope of this specification. </t> <t> Although variable substitution is most suitable for use in the context of referrals, it may be used in the context of replication and migration. If it is used in these contexts, the server must ensure that no matter what values the client presents for the substituted variables, the result is always a valid successor file system instance to that from which a transition is occurring, i.e., that the data is identical or represents a later image of a writable file system. </t> <t> Note that when fli_rootpath is a null pathname (that is, one with zero components), the file system designated is at the root of the specified server, whether or not the FSLI4IF_VAR_SUB flag within the associated fs_locations_info4 structure is set. </t> </section> </section> <section anchor="fs_status"title="Thenumbered="true" toc="default"> <name>The Attributefs_status">fs_status</name> <t> In an environment in which multiple copies of the same basic set of data are available, information regarding the particular source of such data and the relationships among different copies can be very helpful in providing consistent data to applications. </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ enum fs4_status_type { STATUS4_FIXED = 1, STATUS4_UPDATED = 2, STATUS4_VERSIONED = 3, STATUS4_WRITABLE = 4, STATUS4_REFERRAL = 5 }; struct fs4_status { bool fss_absent; fs4_status_type fss_type; utf8str_cs fss_source; utf8str_cs fss_current; int32_t fss_age; nfstime4 fss_version; };</artwork> </figure>]]></sourcecode> <t> The boolean fss_absent indicates whether the file system is currently absent. This value will be set if the file system was previously present and becomes absent, or if the file system has never been present and the type is STATUS4_REFERRAL. When this boolean is set and the type is not STATUS4_REFERRAL, the remaining information in the fs4_status reflects that last valid when the file system was present. </t> <t> The fss_type field indicates the kind of file system image represented. This is of particular importance when using the version values to determine appropriate succession of file system images. When fss_absent is set, and the file system was previously present, the value of fss_type reflected is that when the file was last present. Five values are distinguished: </t><t> <list style='symbols'> <t><ul spacing="normal"> <li> STATUS4_FIXED, which indicates a read-only image in the sense that it will never change. The possibility is allowed that, as a result of migration or switch to a different image, changed data can be accessed, but within the confines of this instance, no change is allowed. The client can use this fact to cache aggressively.</t> <t></li> <li> STATUS4_VERSIONED, which indicates that the image, like the STATUS4_UPDATED case, is updated externally, but it provides a guarantee that the server will carefully update an associated version value so that the client can protect itself from a situation in which it reads data from one version of the file system and then later reads data from an earlier version of the same file system. See below for a discussion of how this can be done.</t> <t></li> <li> STATUS4_UPDATED, which indicates an image that cannot be updated by the user writing to it but that may be changed externally, typically because it is a periodically updated copy of another writable file system somewhere else. In this case, version information is not provided, and the client does not have the responsibility of making sure that this version only advances upon a file system instance transition. In this case, it is the responsibility of the server to make sure that the data presented after a file system instance transition is a proper successor image and includes all changes seen by the client and any change made before all such changes.</t> <t></li> <li> STATUS4_WRITABLE, which indicates that the file system is an actual writable one. The client need not, of course, actually write to the file system, but once it does, it should not accept a transition to anything other than a writable instance of that same file system.</t> <t></li> <li> STATUS4_REFERRAL, which indicates that the file system in question is absent and has never been present on this server.</t> </list> </t></li> </ul> <t> Note that in the STATUS4_UPDATED and STATUS4_VERSIONED cases, the server is responsible for the appropriate handling of locks that are inconsistent with external changes to delegations. If a server gives out delegations, theySHOULD<bcp14>SHOULD</bcp14> be recalled before an inconsistent change is made to the data, andMUST<bcp14>MUST</bcp14> be revoked if this is not possible. Similarly, if an OPEN is inconsistent with data that is changed (the OPEN has OPEN4_SHARE_DENY_WRITE/OPEN4_SHARE_DENY_BOTH and the data is changed), that OPENSHOULD<bcp14>SHOULD</bcp14> be considered administratively revoked. </t> <t> The opaque strings fss_source and fss_current provide a way of presenting information about the source of the file system image being present. It is not intended that the client do anything with this information other than make it available to administrative tools. It is intended that this information be helpful when researching possible problems with a file system image that might arise when it is unclear if the correct image is being accessed and, if not, how that image came to be made. This kind of diagnostic information will be helpful, if, as seems likely, copies of file systems are made in many different ways (e.g., simple user-level copies, file-system-level point-in-time copies, clones of the underlying storage), under a variety of administrative arrangements. In such environments, determining how a given set of data was constructed can be very helpful in resolving problems. </t> <t> The opaque string fss_source is used to indicate the source of a given file system with the expectation that tools capable of creating a file system image propagate this information, when possible. It is understood that this may not always be possible since a user-level copy may be thought of as creating a new data set and the tools used may have no mechanism to propagate this data. When a file system is initially created, it is desirable to associate with it data regarding how the file system was created, where it was created, who created it, etc. Making this information available in this attribute in a human-readable string will be helpful for applications and system administrators and will also serve to make it available when the original file system is used to make subsequent copies. </t> <t> The opaque string fss_current should provide whatever information is available about the source of the current copy. Such information includes the tool creating it, any relevant parameters to that tool, the time at which the copy was done, the user making the change, the server on which the change was made, etc. All information should be in a human-readable string. </t> <t> The field fss_age provides an indication of how out-of-date the file system currently is with respect to its ultimate data source (in case of cascading data updates). This complements the fls_currency field of fs_locations_server4 (see <xreftarget='SEC11-li-new' />)target="SEC11-li-new" format="default"/>) in the following way: the information in fls_currency gives a bound for how out of date the data in a file system might typically get, while the value in fss_age gives a bound on how out-of-date that data actually is. Negative values imply that no information is available. A zero means that this data is known to be current. A positive value means that this data is known to be no older than that number of seconds with respect to the ultimate data source. Using this value, the client may be able to decide that a data copy is too old, so that it may search for a newer version to use. </t> <t> The fss_version field provides a version identification, in the form of a time value, such that successive versions always have later time values. When the fs_type is anything other than STATUS4_VERSIONED, the server may provide such a value, but there is no guarantee as to its validity and clients will not use it except to provide additional information to add to fss_source and fss_current. </t> <t> When fss_type is STATUS4_VERSIONED, serversSHOULD<bcp14>SHOULD</bcp14> provide a value of fss_version that progresses monotonically whenever any new version of the data is established. This allows the client, if reliable image progression is important to it, to fetch this attribute as part of each COMPOUND where data or metadata from the file system is used. </t> <t> When it is important to the client to make sure that only valid successor images are accepted, it must make sure that it does not read data or metadata from the file system without updating its sense of the current state of the image. This is to avoid the possibility that the fs_status that the client holds will be one for an earlier image, which would cause the client to accept a new file system instance that is later than that but still earlier than the updated data read by the client. </t> <t> In order to accept valid images reliably, the client must do a GETATTR of the fs_status attribute that follows any interrogation of data or metadata within the file system in question. Often this is most conveniently done by appending such a GETATTR after all other operations that reference a given file system. When errors occur between reading file system data and performing such a GETATTR, care must be exercised to make sure that the data in question is not used before obtaining the proper fs_status value. In this connection, when an OPEN is done within such a versioned file system and the associated GETATTR of fs_status is not successfully completed, the open file in question must not be accessed until that fs_status is fetched. </t> <t> The procedure above will ensure that before using any data from the file system the client has in hand a newly-fetched current version of the file system image. Multiple values for multiple requests in flight can be resolved by assembling them into the required partial order (and the elements should form a total order within the partial order) and using the last. The client may then, when switching among file system instances, decline to use an instance that does not have an fss_type of STATUS4_VERSIONED or whose fss_version field is earlier than the last one obtained from the predecessor file system instance. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Parallelanchor="pnfs" numbered="true" toc="default"> <name>Parallel NFS(pNFS)" anchor="pnfs">(pNFS)</name> <sectiontitle="Introduction" anchor="pnfs_intro">anchor="pnfs_intro" numbered="true" toc="default"> <name>Introduction</name> <t> pNFS is anOPTIONAL<bcp14>OPTIONAL</bcp14> feature within NFSv4.1; the pNFS feature set allows direct client access to the storage devices containing file data. When file data for a single NFSv4 server is stored on multiple and/or higher-throughput storage devices (by comparison to the server's throughput capability), the result can be significantly better file access performance. The relationship among multiple clients, a single server, and multiple storage devices for pNFS (server and clients have access to all storage devices) is shown in <xreftarget="fig_system"/>.target="fig_system" format="default"/>. </t> <figure anchor="fig_system"><artwork><![CDATA[<artwork name="" type="" align="left" alt=""><![CDATA[ +-----------+ |+-----------+ +-----------+ ||+-----------+ | | ||| | NFSv4.1 + pNFS | | +|| Clients |<------------------------------>| Server | +| | | | +-----------+ | | ||| +-----------+ ||| | ||| | ||| Storage +-----------+ | ||| Protocol |+-----------+ | ||+----------------||+-----------+ Control | |+-----------------||| | Protocol| +------------------+|| Storage |------------+ +| Devices | +-----------+ ]]></artwork> </figure> <t> In this model, the clients, server, and storage devices are responsible for managing file access. This is in contrast to NFSv4 without pNFS, where it is primarily the server's responsibility; some of this responsibility may be delegated to the client under strictly specified conditions. See <xreftarget="storage_protocol"/>target="storage_protocol" format="default"/> for a discussion of the Storage Protocol. See <xreftarget="control_protocol"/>target="control_protocol" format="default"/> for a discussion of the Control Protocol. </t> <t> pNFS takes the form ofOPTIONAL<bcp14>OPTIONAL</bcp14> operations that manage protocol objects called 'layouts' (<xreftarget="layout_types"/>)target="layout_types" format="default"/>) that contain a byte-range and storage location information. The layout is managed in a similar fashion as NFSv4.1 data delegations. For example, the layout is leased, recallable, and revocable. However, layouts are distinct abstractions and are manipulated with new operations. When a client holds a layout, it is granted the ability to directly access the byte-range at the storage location specified in the layout. </t> <t> There are interactions between layouts and other NFSv4.1 abstractions such as data delegations and byte-range locking. Delegation issues are discussed in <xreftarget="recalling_layout"/>.target="recalling_layout" format="default"/>. Byte-range locking issues are discussed in Sections <xref target="layout_iomode"format="counter" />format="counter"/> and <xref target="layout_semantics"format="counter" />.format="counter"/>. </t> </section> <sectiontitle="pNFS Definitions">numbered="true" toc="default"> <name>pNFS Definitions</name> <t> NFSv4.1's pNFS feature provides parallel data access to a file system that stripes its content across multiple storage servers. The first instantiation of pNFS, as part of NFSv4.1, separates the file system protocol processing into two parts: metadata processing and data processing. Data consist of the contents of regular files that are striped across storage servers. Data striping occurs in at least two ways: on a file-by-file basis and, within sufficiently large files, on a block-by-block basis. In contrast, striped access to metadata by pNFS clients is not provided in NFSv4.1, even though the file system back end of a pNFS server might stripe metadata. Metadata consist of everything else, including the contents of non-regular files (e.g., directories); see <xreftarget="metadata"/>.target="metadata" format="default"/>. The metadata functionality is implemented by an NFSv4.1 server that supports pNFS and the operations described in <xref target="nfsv41operations"/>;format="default"/>; such a server is called a metadata server (<xreftarget="mds"/>).target="mds" format="default"/>). </t> <t> The data functionality is implemented by one or more storage devices, each of which are accessed by the client via a storage protocol. A subset (defined in <xref target="ds_ops"/>)format="default"/>) of NFSv4.1 is one such storage protocol. New terms are introduced to the NFSv4.1 nomenclature and existing terms are clarified to allow for the description of the pNFS feature. </t> <sectiontitle="Metadata" anchor="metadata">anchor="metadata" numbered="true" toc="default"> <name>Metadata</name> <t> Information about a file system object, such as its name, location within the namespace, owner, ACL, and other attributes. Metadata may also include storage location information, and this will vary based on the underlying storage mechanism that is used. </t> </section> <sectiontitle="Metadata Server" anchor="mds">anchor="mds" numbered="true" toc="default"> <name>Metadata Server</name> <t> An NFSv4.1 server that supports the pNFS feature. A variety of architectural choices exist for the metadata server and its use of file system information held at the server. Some servers may contain metadata only for file objects residing at the metadata server, while the file data resides on associated storage devices. Other metadata servers may hold both metadata and a varying degree of file data. </t> </section> <sectiontitle="pNFS Client">numbered="true" toc="default"> <name>pNFS Client</name> <t> An NFSv4.1 client that supports pNFS operations and supports at least one storage protocol for performing I/O to storage devices. </t> </section> <sectiontitle="Storage Device">numbered="true" toc="default"> <name>Storage Device</name> <t> A storage device stores a regular file's data, but leaves metadata management to the metadata server. A storage device could be another NFSv4.1 server, an object-based storage device (OSD), a block device accessed over a System Area Network (SAN, e.g., either FiberChannel or iSCSI SAN), or some other entity. </t> </section> <section anchor="storage_protocol"title="Storage Protocol">numbered="true" toc="default"> <name>Storage Protocol</name> <t> As noted in <xreftarget="fig_system"/>,target="fig_system" format="default"/>, the storage protocol is the method used by the client to store and retrieve data directly from the storage devices. </t> <t> The NFSv4.1 pNFS feature has been structured to allow for a variety of storage protocols to be defined and used. One example storage protocol is NFSv4.1 itself (as documented in <xreftarget="file_layout_type"/>).target="file_layout_type" format="default"/>). Other options for the storage protocol are described elsewhere and include:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Block/volume protocols such as Internet SCSI (iSCSI) <xreftarget="RFC3720" />target="RFC7143" format="default"/> and FCP <xref target="FCP-2"/>.format="default"/>. The block/volume protocol support can be independent of the addressing structure of the block/volume protocol used, allowing more than one protocol to access the same file data and enabling extensibility to other block/volume protocols. See <xreftarget="RFC5663"/>target="RFC5663" format="default"/> for a layout specification that allows pNFS to use block/volume storage protocols.</t> <t></li> <li> Object protocols such as OSD over iSCSI or Fibre Channel <xref target="OSD-T10"/>.format="default"/>. See <xreftarget="RFC5664"/>target="RFC5664" format="default"/> for a layout specification that allows pNFS to use object storage protocols.</t> </list> </t></li> </ul> <t> It is possible that various storage protocols are available to both client and server and it may be possible that a client and server do not have a matching storage protocol available to them. Because of this, the pNFS serverMUST<bcp14>MUST</bcp14> support normal NFSv4.1 access to any file accessible by the pNFS feature; this will allow for continued interoperability between an NFSv4.1 client and server. </t> </section> <section anchor="control_protocol"title="Control Protocol">numbered="true" toc="default"> <name>Control Protocol</name> <t> As noted in <xreftarget="fig_system"/>,target="fig_system" format="default"/>, the control protocol is used by the exported file system between the metadata server and storage devices. Specification of such protocols is outside the scope of the NFSv4.1 protocol. Such control protocols would be used to control activities such as the allocation and deallocation of storage, the management of state required by the storage devices to perform client access control, and, depending on the storage protocol, the enforcement of authentication and authorization so that restrictions that would be enforced by the metadata server are also enforced by the storage device. </t> <t> A particular control protocol is notREQUIRED<bcp14>REQUIRED</bcp14> by NFSv4.1 but requirements are placed on the control protocol for maintaining attributes like modify time, the change attribute, and the end-of-file (EOF) position. Note that if pNFS is layered over a clustered, parallel file system (e.g., <xreftarget="PVFS">PVFS</xref>),target="PVFS" format="default">PVFS</xref>), the mechanisms that enable clustering and parallelism in that file system can be considered the control protocol. </t> </section> <section anchor="layout_types"title="Layout Types">numbered="true" toc="default"> <name>Layout Types</name> <t> A layout describes the mapping of a file's data to the storage devices that hold the data. A layout is said to belong to a specific layout type (data type layouttype4, see <xref target="layouttype4"/>).format="default"/>). The layout type allows for variants to handle different storage protocols, such as those associated with block/volume <xref target="RFC5663"/>,format="default"/>, object <xref target="RFC5664"/>,format="default"/>, and file (<xref target="file_layout_type"/>)format="default"/>) layout types. A metadata server, along with its control protocol,MUST<bcp14>MUST</bcp14> support at least one layout type. A private sub-range of the layout type namespace is also defined. Values from the private layout type rangeMAY<bcp14>MAY</bcp14> be used for internal testing or experimentation (see <xreftarget="layouttype4"/>).target="layouttype4" format="default"/>). </t> <t> As an example, the organization of the file layout type could be an array of tuples (e.g., device ID, filehandle), along with a definition of how the data is stored across the devices (e.g., striping). A block/volume layout might be an array of tuples that store <device ID, block number, block count> along with information about block size and the associated file offset of the block number. An object layout might be an array of tuples <device ID, object ID> and an additional structure (i.e., the aggregation map) that defines how the logical byte sequence of the file data is serialized into the different objects. Note that the actual layouts are typically more complex than these simple expository examples. </t> <t> Requests for pNFS-related operations will often specify a layout type. Examples of such operations are GETDEVICEINFO and LAYOUTGET. The response for these operations will include structures such as a device_addr4 or a layout4, each of which includes a layout type within it. The layout type sent by the serverMUST<bcp14>MUST</bcp14> always be the same one requested by the client. When a server sends a response that includes a different layout type, the clientSHOULD<bcp14>SHOULD</bcp14> ignore the response and behave as if the server had returned an error response. </t> </section> <sectiontitle="Layout" anchor="layout">anchor="layout" numbered="true" toc="default"> <name>Layout</name> <t> A layout defines how a file's data is organized on one or more storage devices. There are many potential layout types; each of the layout types are differentiated by the storage protocol used to access data and by the aggregation scheme that lays out the file data on the underlying storage devices. A layout is precisely identified by the tuple <client ID, filehandle, layout type, iomode, range>, where filehandle refers to the filehandle of the file on the metadata server. </t> <t> It is important to define when layouts overlap and/or conflict with each other. For two layouts with overlapping byte-ranges to actually overlap each other, both layouts must be of the same layout type, correspond to the same filehandle, and have the same iomode. Layouts conflict when they overlap and differ in the content of the layout (i.e., the storage device/file mapping parameters differ). Note that differing iomodes do not lead to conflicting layouts. It is permissible for layouts with different iomodes, pertaining to the same byte-range, to be held by the same client. An example of this would be copy-on-write functionality for a block/volume layout type. </t> </section> <sectiontitle="Layout Iomode" anchor="layout_iomode">anchor="layout_iomode" numbered="true" toc="default"> <name>Layout Iomode</name> <t> The layout iomode (data type layoutiomode4, see <xref target="layoutiomode4"/>)format="default"/>) indicates to the metadata server the client's intent to perform either just READ operations or a mixture containing READ and WRITE operations. For certain layout types, it is useful for a client to specify this intent at the time it sends LAYOUTGET (<xref target="OP_LAYOUTGET"/>).format="default"/>). For example, for block/volume-based protocols, block allocation could occur when a LAYOUTIOMODE4_RW iomode is specified. A special LAYOUTIOMODE4_ANY iomode is defined and can only be used for LAYOUTRETURN and CB_LAYOUTRECALL, not for LAYOUTGET. It specifies that layouts pertaining to both LAYOUTIOMODE4_READ and LAYOUTIOMODE4_RW iomodes are being returned or recalled, respectively. </t> <t> A storage device may validate I/O with regard to the iomode; this is dependent upon storage device implementation and layout type. Thus, if the client's layout iomode is inconsistent with the I/O being performed, the storage device may reject the client's I/O with an error indicating that a new layout with the correct iomode should be obtained via LAYOUTGET. For example, if a client gets a layout with a LAYOUTIOMODE4_READ iomode and performs a WRITE to a storage device, the storage device is allowed to reject that WRITE. </t> <t> The use of the layout iomode does not conflict with OPEN share modes or byte-range LOCK operations; open share mode and byte-range lock conflicts are enforced as they are without the use of pNFS and are logically separate from the pNFS layout level. Open share modes and byte-range locks are the preferred method for restricting user access to data files. For example, an OPEN of OPEN4_SHARE_ACCESS_WRITE does not conflict with a LAYOUTGET containing an iomode of LAYOUTIOMODE4_RW performed by another client. Applications that depend on writing into the same file concurrently may use byte-range locking to serialize their accesses. </t> </section> <sectiontitle="Device IDs" anchor="device_ids">anchor="device_ids" numbered="true" toc="default"> <name>Device IDs</name> <t> The device ID (data type deviceid4, see <xreftarget="deviceid4"/>)target="deviceid4" format="default"/>) identifies a group of storage devices. The scope of a device ID is the pair <client ID, layout type>. In practice, a significant amount of information may be required to fully address a storage device. Rather than embedding all such information in a layout, layouts embed device IDs. The NFSv4.1 operation GETDEVICEINFO (<xref target="OP_GETDEVICEINFO"/>)format="default"/>) is used to retrieve the complete address information (including all device addresses for the device ID) regarding the storage device according to its layout type and device ID. For example, the address of an NFSv4.1 data server or of an object-based storage device could be an IP address and port. The address of a block storage device could be a volume label. </t> <t> Clients cannot expect the mapping between a device ID and its storage device address(es) to persist across metadata server restart. See <xref target="mds_recovery"/>format="default"/> for a description of how recovery works in that situation. </t> <t> A device ID lives as long as there is a layout referring to the device ID. If there are no layouts referring to the device ID, the server is free to delete the device ID any time. Once a device ID is deleted by the server, the serverMUST NOT<bcp14>MUST NOT</bcp14> reuse the device ID for the same layout type and client ID again. This requirement is feasible because the device ID is 16 bytes long, leaving sufficient room to store a generation number if the server's implementation requires most of the rest of the device ID's content to be reused. This requirement is necessary because otherwise the race conditions between asynchronous notification of device ID addition and deletion would be too difficult to sort out. </t> <t> Device ID to device address mappings are not leased, and can be changed at any time. (Note that while device ID to device address mappings are likely to change after the metadata server restarts, the server is not required to change the mappings.) A server has two choices for changing mappings. It can recall all layouts referring to the device ID or it can use a notification mechanism. </t> <t> The NFSv4.1 protocol has no optimal way to recall all layouts that referred to a particular device ID (unless the server associates a single device ID with a single fsid or a single client ID; in which case, CB_LAYOUTRECALL has options for recalling all layouts associated with the fsid, client ID pair, or just the client ID). </t> <t> Via a notification mechanism (see <xref target="OP_CB_NOTIFY_DEVICEID"/>),format="default"/>), device ID to device address mappings can change over the duration of server operation without recalling or revoking the layouts that refer to device ID. The notification mechanism can also delete a device ID, but only if the client has no layouts referring to the device ID. A notification of a change to a device ID to device address mapping will immediately or eventually invalidate some or all of the device ID's mappings. The serverMUST<bcp14>MUST</bcp14> support notifications and the client must request them before they can be used. For further information about the notificationtypestypes, see <xref target="OP_CB_NOTIFY_DEVICEID"/>.format="default"/>. </t> </section> </section> <sectiontitle="pNFS Operations" anchor="pnfs_ops">anchor="pnfs_ops" numbered="true" toc="default"> <name>pNFS Operations</name> <t> NFSv4.1 has several operations that are needed for pNFS servers, regardless of layout type or storage protocol. These operations are all sent to a metadata server and summarized here. While pNFS is anOPTIONAL<bcp14>OPTIONAL</bcp14> feature, if pNFS is implemented, some operations areREQUIRED<bcp14>REQUIRED</bcp14> in order to comply with pNFS. See <xreftarget="operation_mandlist"/>.target="operation_mandlist" format="default"/>. </t> <t> These are the fore channel pNFS operations:<list style='hanging'> <t hangText="GETDEVICEINFO"></t> <dl newline="false" spacing="normal"> <dt>GETDEVICEINFO</dt> <dd> (<xref target="OP_GETDEVICEINFO"/>),format="default"/>), as noted previously (<xref target="device_ids"/>),format="default"/>), returns the mapping of device ID to storage device address.</t> <t hangText="GETDEVICELIST"></dd> <dt>GETDEVICELIST</dt> <dd> (<xref target="OP_GETDEVICELIST"/>)format="default"/>) allows clients to fetch all device IDs for a specific file system.</t> <t hangText="LAYOUTGET"></dd> <dt>LAYOUTGET</dt> <dd> (<xref target="OP_LAYOUTGET"/>)format="default"/>) is used by a client to get a layout for a file.</t> <t hangText="LAYOUTCOMMIT"></dd> <dt>LAYOUTCOMMIT</dt> <dd> (<xref target="OP_LAYOUTCOMMIT"/>)format="default"/>) is used to inform the metadata server of the client's intent to commit data that has been written to the storage device (the storage device as originally indicated in the return value of LAYOUTGET).</t> <t hangText="LAYOUTRETURN"></dd> <dt>LAYOUTRETURN</dt> <dd> (<xref target="OP_LAYOUTRETURN"/>)format="default"/>) is used to return layouts for a file, a file system ID (FSID), or a client ID.</t> </list> </t></dd> </dl> <t> These are the backchannel pNFS operations:<list style='hanging'> <t hangText="CB_LAYOUTRECALL"></t> <dl newline="false" spacing="normal"> <dt>CB_LAYOUTRECALL</dt> <dd> (<xref target="OP_CB_LAYOUTRECALL"/>)format="default"/>) recalls a layout, all layouts belonging to a file system, or all layouts belonging to a client ID.</t> <t hangText="CB_RECALL_ANY"></dd> <dt>CB_RECALL_ANY</dt> <dd> (<xref target="OP_CB_RECALL_ANY"/>)format="default"/>) tells a client that it needs to return some number of recallable objects, including layouts, to the metadata server.</t> <t hangText="CB_RECALLABLE_OBJ_AVAIL"></dd> <dt>CB_RECALLABLE_OBJ_AVAIL</dt> <dd> (<xref target="OP_CB_RECALLABLE_OBJ_AVAIL"/>)format="default"/>) tells a client that a recallable object that it was denied (in case of pNFS, a layout denied by LAYOUTGET) due to resource exhaustion is now available.</t> <t hangText="CB_NOTIFY_DEVICEID"></dd> <dt>CB_NOTIFY_DEVICEID</dt> <dd> (<xref target="OP_CB_NOTIFY_DEVICEID"/>)format="default"/>) notifies the client of changes to device IDs.</t> </list> </t></dd> </dl> </section> <sectiontitle="pNFS Attributes" anchor="pnfs_attr">anchor="pnfs_attr" numbered="true" toc="default"> <name>pNFS Attributes</name> <t> A number of attributes specific to pNFS are listed and described in <xref target="pnfs_attr_full"/>.format="default"/>. </t> </section> <sectiontitle="Layout Semantics">numbered="true" toc="default"> <name>Layout Semantics</name> <sectiontitle="Guaranteesanchor="layout_semantics" numbered="true" toc="default"> <name>Guarantees Provided byLayouts" anchor="layout_semantics">Layouts</name> <t> Layouts grant to the client the ability to access data located at a storage device with the appropriate storage protocol. The client is guaranteed the layout will be recalled when one of two things occur: either a conflicting layout is requested or the state encapsulated by the layout becomes invalid (this can happen when an event directly or indirectly modifies the layout). When a layout is recalled and returned by the client, the client continues with the ability to access file data with normal NFSv4.1 operations through the metadata server. Only the ability to access the storage devices is affected. </t> <t> The requirement of NFSv4.1 that all user access rightsMUST<bcp14>MUST</bcp14> be obtained through the appropriate OPEN, LOCK, and ACCESS operations is not modified with the existence of layouts. Layouts are provided to NFSv4.1 clients, and user access still follows the rules of the protocol as if they did not exist. It is a requirement that for a client to access a storage device, a layout must be held by the client. If a storage device receives an I/O request for a byte-range for which the client does not hold a layout, the storage deviceSHOULD<bcp14>SHOULD</bcp14> reject that I/O request. Note that the act of modifying a file for which a layout is held does not necessarily conflict with the holding of the layout that describes the file being modified. Therefore, it is the requirement of the storage protocol or layout type that determines the necessary behavior. For example, block/volume layout types require that the layout's iomode agree with the type of I/O being performed. </t> <t> Depending upon the layout type and storage protocol in use, storage device access permissions may be granted by LAYOUTGET and may be encoded within the type-specific layout. For an example of storage device access permissions, see an object-based protocol such as <xref target="OSD-T10"/>.format="default"/>. If access permissions are encoded within the layout, the metadata serverSHOULD<bcp14>SHOULD</bcp14> recall the layout when those permissions become invalid for any reason -- for example, when a file becomes unwritable or inaccessible to a client. Note, clients are still required to perform the appropriate OPEN, LOCK, and ACCESS operations as described above. The degree to which it is possible for the client to circumvent these operations and the consequences of doing so must be clearly specified by the individual layout type specifications. In addition, these specifications must be clear about the requirements and non-requirements for the checking performed by the server. </t> <t> In the presence of pNFS functionality, mandatory byte-range locksMUST<bcp14>MUST</bcp14> behave as they would without pNFS. Therefore, if mandatory file locks and layouts are provided simultaneously, the storage deviceMUST<bcp14>MUST</bcp14> be able to enforce the mandatory byte-range locks. For example, if one client obtains a mandatory byte-range lock and a second client accesses the storage device, the storage deviceMUST<bcp14>MUST</bcp14> appropriately restrict I/O for the range of the mandatory byte-range lock. If the storage device is incapable of providing this check in the presence of mandatory byte-range locks, then the metadata serverMUST NOT<bcp14>MUST NOT</bcp14> grant layouts and mandatory byte-range locks simultaneously. </t> </section> <sectiontitle="Gettinganchor="obtaining_layout" numbered="true" toc="default"> <name>Getting aLayout" anchor="obtaining_layout">Layout</name> <t> A client obtains a layout with the LAYOUTGET operation. The metadata server will grant layouts of a particular type (e.g., block/volume, object, or file). The client selects an appropriate layout type that the server supports and the client is prepared to use. The layout returned to the client might not exactly match the requested byte-range as described in <xreftarget="OP_LAYOUTGET_DESCRIPTION"/>.target="OP_LAYOUTGET_DESCRIPTION" format="default"/>. As needed a client may send multiple LAYOUTGET operations; these might result in multiple overlapping, non-conflicting layouts (see <xreftarget="layout"/>).target="layout" format="default"/>). </t> <t> In order to get a layout, the client must first have opened the file via the OPEN operation. When a client has no layout on a file, itMUST<bcp14>MUST</bcp14> present an open stateid, a delegation stateid, or a byte-range lock stateid in the loga_stateid argument. A successful LAYOUTGET result includes a layout stateid. The first successful LAYOUTGET processed by the server using a non-layout stateid as an argumentMUST<bcp14>MUST</bcp14> have the "seqid" field of the layout stateid in the response set to one. Thereafter, the clientMUST<bcp14>MUST</bcp14> use a layout stateid (see <xref target="layout_stateid"/>)format="default"/>) on future invocations of LAYOUTGET on the file, and the "seqid"MUST NOT<bcp14>MUST NOT</bcp14> be set to zero. Once the layout has been retrieved, it can be held across multiple OPEN and CLOSE sequences. Therefore, a client may hold a layout for a file that is not currently open by any user on the client. This allows for the caching of layouts beyond CLOSE. </t> <t> The storage protocol used by the client to access the data on the storage device is determined by the layout's type. The client is responsible for matching the layout type with an available method to interpret and use the layout. The method for this layout type selection is outside the scope of the pNFS functionality. </t> <t> Although the metadata server is in control of the layout for a file, the pNFS client can provide hints to the server when a file is opened or created about the preferred layout type and aggregation schemes. pNFS introduces a layout_hint attribute (<xref target="attrdef_layout_hint"/>)format="default"/>) that the client can set at file creation time to provide a hint to the server for new files. Setting this attribute separately, after the file has been created might make it difficult, or impossible, for the server implementation to comply. </t> <t> Because the EXCLUSIVE4 createmode4 does not allow the setting of attributes at file creation time, NFSv4.1 introduces the EXCLUSIVE4_1 createmode4, which does allow attributes to be set at file creation time. In addition, if the session is created with persistent reply caches, EXCLUSIVE4_1 is neither necessary nor allowed. Instead, GUARDED4 both works better and is prescribed. <xref target="exclusive_create"/>format="default"/> in <xref target="OP_OPEN_DESCRIPTION"/>format="default"/> summarizes how a client is allowed to send an exclusive create. </t> </section> <sectiontitle="Layout Stateid" anchor="layout_stateid">anchor="layout_stateid" numbered="true" toc="default"> <name>Layout Stateid</name> <t> As with all other stateids, the layout stateid consists of a "seqid" and "other" field. Once a layout stateid is established, the "other" field will stay constant unless the stateid is revoked or the client returns all layouts on the file and the server disposes of the stateid. The "seqid" field is initially set to one, and is never zero on any NFSv4.1 operation that uses layout stateids, whether it is a fore channel or backchannel operation. After the layout stateid is established, the server increments by one the value of the "seqid" in each subsequent LAYOUTGET and LAYOUTRETURN response, and in each CB_LAYOUTRECALL request. </t> <t> Given the design goal of pNFS to provide parallelism, the layout stateid differs from other stateid types in that the client is expected to send LAYOUTGET and LAYOUTRETURN operations in parallel. The "seqid" value is used by the client to properly sort responses to LAYOUTGET and LAYOUTRETURN. The "seqid" is also used to prevent race conditions between LAYOUTGET and CB_LAYOUTRECALL. Given that the processing rules differ from layout stateids and other stateid types, only the pNFS sections of this document should be considered to determine proper layout stateid handling. </t> <t> Once the client receives a layout stateid, itMUST<bcp14>MUST</bcp14> use the correct "seqid" for subsequent LAYOUTGET or LAYOUTRETURN operations. The correct "seqid" is defined as the highest "seqid" value from responses of fully processed LAYOUTGET or LAYOUTRETURN operations or arguments of a fully processed CB_LAYOUTRECALL operation. Since the server is incrementing the "seqid" value on each layout operation, the client may determine the order of operation processing by inspecting the "seqid" value. In the case of overlapping layout ranges, the ordering information will provide the client the knowledge of which layout ranges are held. Note that overlapping layout ranges may occur because of the client's specific requests or because the server is allowed to expand the range of a requested layout and notify the client in the LAYOUTRETURN results. Additional layout stateid sequencing requirements are provided in <xreftarget="pnfs_operation_sequencing"/>.target="pnfs_operation_sequencing" format="default"/>. </t> <t> The client's receipt of a "seqid" is not sufficient for subsequent use. The client must fully process the operations before the "seqid" can be used. For LAYOUTGET results, if the client is not using the forgetful model (<xreftarget="recall_robustness"/>),target="recall_robustness" format="default"/>), itMUST<bcp14>MUST</bcp14> first update its record of what ranges of the file's layout it has before using the seqid. For LAYOUTRETURN results, the clientMUST<bcp14>MUST</bcp14> delete the range from its record of what ranges of the file's layout it had before using the seqid. For CB_LAYOUTRECALL arguments, the clientMUST<bcp14>MUST</bcp14> send a response to the recall before using the seqid. The fundamental requirement in client processing is that the "seqid" is used to provide the order of processing. LAYOUTGET results may be processed in parallel. LAYOUTRETURN results may be processed in parallel. LAYOUTGET and LAYOUTRETURN responses may be processed in parallel as long as the ranges do not overlap. CB_LAYOUTRECALL request processingMUST<bcp14>MUST</bcp14> be processed in "seqid" order at all times. </t> <t> Once a client has no more layouts on a file, the layout stateid is no longer valid andMUST NOT<bcp14>MUST NOT</bcp14> be used. Any attempt to use such a layout stateid will result in NFS4ERR_BAD_STATEID. </t> </section> <sectiontitle="Committinganchor="committing_layout" numbered="true" toc="default"> <name>Committing aLayout" anchor="committing_layout">Layout</name> <t> Allowing for varying storage protocol capabilities, the pNFS protocol does not require the metadata server and storage devices to have a consistent view of file attributes and data location mappings. Data location mapping refers to aspects such as which offsets store data as opposed to storing holes (see <xref target="sparse_dense"/>format="default"/> for a discussion). Related issues arise for storage protocols where a layout may hold provisionally allocated blocks where the allocation of those blocks does not survive a complete restart of both the client and server. Because of this inconsistency, it is necessary to resynchronize the client with the metadata server and its storage devices and make any potential changes available to other clients. This is accomplished by use of the LAYOUTCOMMIT operation. </t> <t> The LAYOUTCOMMIT operation is responsible for committing a modified layout to the metadata server. The data should be written and committed to the appropriate storage devices before the LAYOUTCOMMIT occurs. The scope of the LAYOUTCOMMIT operation depends on the storage protocol in use. It is important to note that the level of synchronization is from the point of view of the client that sent the LAYOUTCOMMIT. The updated state on the metadata server need only reflect the state as of the client's last operation previous to the LAYOUTCOMMIT. The metadata server is notREQUIRED<bcp14>REQUIRED</bcp14> to maintain a global view that accounts for other clients' I/O that may have occurred within the same time frame. </t> <t> For block/volume-based layouts, LAYOUTCOMMIT may require updating the block list that comprises the file and committing this layout to stable storage. For file-based layouts, synchronization of attributes between the metadata and storage devices, primarily the size attribute, is required. </t> <t> The control protocol is free to synchronize the attributes before it receives a LAYOUTCOMMIT; however, upon successful completion of a LAYOUTCOMMIT, state that exists on the metadata server that describes the fileMUST<bcp14>MUST</bcp14> be synchronized with the state that exists on the storage devices that comprise that file as of the client's last sent operation. Thus, a client that queries the size of a file between a WRITE to a storage device and the LAYOUTCOMMIT might observe a size that does not reflect the actual data written. </t> <t> The clientMUST<bcp14>MUST</bcp14> have a layout in order to send a LAYOUTCOMMIT operation. </t> <sectiontitle="LAYOUTCOMMITnumbered="true" toc="default"> <name>LAYOUTCOMMIT andchange/time_modify">change/time_modify</name> <t> The change and time_modify attributes may be updated by the server when the LAYOUTCOMMIT operation is processed. The reason for this is that some layout types do not support the update of these attributes when the storage devices process I/O operations. If a client has a layout with the LAYOUTIOMODE4_RW iomode on the file, the clientMAY<bcp14>MAY</bcp14> provide a suggested value to the server for time_modify within the arguments to LAYOUTCOMMIT. Based on the layout type, the provided value may or may not be used. The server should sanity-check the client-provided values before they are used. For example, the server should ensure that time does not flow backwards. The client always has the option to set time_modify through an explicit SETATTR operation. </t> <t> For some layout protocols, the storage device is able to notify the metadata server of the occurrence of an I/O; as a result, the change and time_modify attributes may be updated at the metadata server. For a metadata server that is capable of monitoring updates to the change and time_modify attributes, LAYOUTCOMMIT processing is not required to update the change attribute. In this case, the metadata server must ensure that no further update to the data has occurred since the last update of the attributes; file-based protocols may have enough information to make this determination or may update the change attribute upon each file modification. This also applies for the time_modify attribute. If the server implementation is able to determine that the file has not been modified since the last time_modify update, the server need not update time_modify at LAYOUTCOMMIT. At LAYOUTCOMMIT completion, the updated attributes should be visible if that file was modified since the latest previous LAYOUTCOMMIT or LAYOUTGET. </t> </section> <sectiontitle="LAYOUTCOMMITanchor="general_layoutcommit" numbered="true" toc="default"> <name>LAYOUTCOMMIT andsize" anchor="general_layoutcommit">size</name> <t> The size of a file may be updated when the LAYOUTCOMMIT operation is used by the client. One of the fields in the argument to LAYOUTCOMMIT is loca_last_write_offset; this field indicates the highest byte offset written but not yet committed with the LAYOUTCOMMIT operation. The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. If the client has a layout with LAYOUTIOMODE4_RW iomode on the file, with a byte-range (denoted by the values of lo_offset and lo_length) that overlaps loca_last_write_offset, then the clientMAY<bcp14>MAY</bcp14> set no_newoffset to TRUE and provide an offset that will update the file size. Keep in mind that offset is not the same as length, though they are related. For example, a loca_last_write_offset value of zero means that one byte was written at offset zero, and so the length of the file is at least one byte. </t> <t> The metadata server may do one of the following:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Update the file's size using the last write offset provided by the client as either the true file size or as a hint of the file size. If the metadata server has a method available, any new value for file size should be sanity-checked. For example, the file must not be truncated if the client presents a last write offset less than the file's current size.</t> <t></li> <li> Ignore the client-provided last write offset; the metadata server must have sufficient knowledge from other sources to determine the file's size. For example, the metadata server queries the storage devices with the control protocol.</t> </list> </t></li> </ol> <t> The method chosen to update the file's size will depend on the storage device's and/or the control protocol's capabilities. For example, if the storage devices are block devices with no knowledge of file size, the metadata server must rely on the client to set the last write offset appropriately. </t> <t> The results of LAYOUTCOMMIT contain a new size value in the form of a newsize4 union data type. If the file's size is set as a result of LAYOUTCOMMIT, the metadata server must reply with the new size; otherwise, the new size is not provided. If the file size is updated, the metadata serverSHOULD<bcp14>SHOULD</bcp14> update the storage devices such that the new file size is reflected when LAYOUTCOMMIT processing is complete. For example, the client should be able to read up to the new file size. </t> <t> The client can extend the length of a file or truncate a file by sending a SETATTR operation to the metadata server with the size attribute specified. If the size specified is larger than the current size of the file, the file is "zero extended", i.e., zeros are implicitly added between the file's previous EOF and the new EOF. (In many implementations, the zero-extended byte-range of the file consists of unallocated holes in the file.) When the client writes past EOF via WRITE, the SETATTR operation does not need to be used. </t> </section> <sectiontitle="LAYOUTCOMMITanchor="layoutcommit_update" numbered="true" toc="default"> <name>LAYOUTCOMMIT andlayoutupdate" anchor="layoutcommit_update">layoutupdate</name> <t> The LAYOUTCOMMIT argument contains a loca_layoutupdate field (<xreftarget="OP_LAYOUTCOMMIT_ARGUMENT"/>)target="OP_LAYOUTCOMMIT_ARGUMENT" format="default"/>) of data type layoutupdate4 (<xreftarget="layoutupdate4"/>).target="layoutupdate4" format="default"/>). This argument is a layout-type-specific structure. The structure can be used to pass arbitrary layout-type-specific information from the client to the metadata server at LAYOUTCOMMIT time. For example, if using a block/volume layout, the client can indicate to the metadata server which reserved or allocated blocks the client used or did not use. The content of loca_layoutupdate (field lou_body) need not be the same layout-type-specific content returned by LAYOUTGET (<xref target="OP_LAYOUTGET_RESULT"/>)format="default"/>) in the loc_body field of the lo_content field of the logr_layout field. The content of loca_layoutupdate is defined by the layout type specification and is opaque to LAYOUTCOMMIT. </t> </section> </section><!-- Layout Semantics --><sectiontitle="Recallinganchor="recalling_layout" numbered="true" toc="default"> <name>Recalling aLayout" anchor="recalling_layout">Layout</name> <t> Since a layout protects a client's access to a file via a direct client-storage-device path, a layout need only be recalled when it is semantically unable to serve this function. Typically, this occurs when the layout no longer encapsulates the true location of the file over the byte-range it represents. Any operation or action, such as server-driven restriping or load balancing, that changes the layout will result in a recall of the layout. A layout is recalled by the CB_LAYOUTRECALL callback operation (see <xref target="OP_CB_LAYOUTRECALL"/>)format="default"/>) and returned with LAYOUTRETURN (see <xref target="OP_LAYOUTRETURN"/>).format="default"/>). The CB_LAYOUTRECALL operation may recall a layout identified by a byte-range, all layouts associated with a file system ID (FSID), or all layouts associated with a client ID. <xref target="pnfs_operation_sequencing"/>format="default"/> discusses sequencing issues surrounding the getting, returning, and recalling of layouts. </t> <t> An iomode is also specified when recalling a layout. Generally, the iomode in the recall request must match the layout being returned; for example, a recall with an iomode of LAYOUTIOMODE4_RW should cause the client to only return LAYOUTIOMODE4_RW layouts and not LAYOUTIOMODE4_READ layouts. However, a special LAYOUTIOMODE4_ANY enumeration is defined to enable recalling a layout of any iomode; in other words, the client must return both LAYOUTIOMODE4_READ and LAYOUTIOMODE4_RW layouts. </t> <t> A REMOVE operationSHOULD<bcp14>SHOULD</bcp14> cause the metadata server to recall the layout to prevent the client from accessing a non-existent file and to reclaim state stored on the client. Since a REMOVE may be delayed until the last close of the file has occurred, the recall may also be delayed until this time. After the last reference on the file has been released and the file has been removed, the client should no longer be able to perform I/O using the layout. In the case of a file-based layout, the data serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_STALE in response to any operation on the removed file. </t> <t> Once a layout has been returned, the clientMUST NOT<bcp14>MUST NOT</bcp14> send I/Os to the storage devices for the file, byte-range, and iomode represented by the returned layout. If a client does send an I/O to a storage device for which it does not hold a layout, the storage deviceSHOULD<bcp14>SHOULD</bcp14> reject the I/O. </t> <t anchor="pnfs_and_delegations"> Although pNFS does not alter the file data caching capabilities of clients, or their semantics, it recognizes that some clients may perform more aggressive write-behind caching to optimize the benefits provided by pNFS. However, write-behind caching may negatively affect the latency in returning a layout in response to a CB_LAYOUTRECALL; this is similar to file delegations and the impact that file data caching has on DELEGRETURN. Client implementationsSHOULD<bcp14>SHOULD</bcp14> limit the amount of unwritten data they have outstanding at any one time in order to prevent excessively long responses to CB_LAYOUTRECALL. Once a layout is recalled, a serverMUST<bcp14>MUST</bcp14> wait one lease period before taking further action. As soon as a lease period has passed, the server may choose to fence the client's access to the storage devices if the server perceives the client has taken too long to return a layout. However, just as in the case of data delegation and DELEGRETURN, the server may choose to wait, given that the client is showing forward progress on its way to returning the layout. This forward progress can take the form of successful interaction with the storage devices or of sub-portions of the layout being returned by the client. The server can also limit exposure to these problems by limiting the byte-ranges initially provided in the layouts and thus the amount of outstanding modified data. </t> <sectiontitle="Layoutanchor="recall_robustness" numbered="true" toc="default"> <name>Layout Recall CallbackRobustness" anchor="recall_robustness">Robustness</name> <t> It has been assumed thus far that pNFS client state (layout ranges and iomode) for a file exactly matches that of the pNFS server for that file. This assumption leads to the implication that any callback results in a LAYOUTRETURN or set of LAYOUTRETURNs that exactly match the range in the callback, since both client and server agree about the state being maintained. However, it can be useful if this assumption does not always hold. For example: </t><t> <list style="symbols"> <t><ul spacing="normal"> <li> If conflicts that require callbacks are very rare, and a server can use a multi-file callback to recover per-client resources (e.g., via an FSID recall or a multi-file recall within a single CB_COMPOUND), the result may be significantly less client-server pNFS traffic.</t> <t></li> <li> It may be useful for servers to maintain information about what ranges are held by a client on a coarse-grained basis, leading to the server's layout ranges being beyond those actually held by the client. In the extreme, a server could manage conflicts on a per-file basis, only sending whole-file callbacks even though clients may request and be granted sub-file ranges.</t> <t></li> <li> It may be useful for clients to "forget" details about what layouts and ranges the client actually has, leading to the server's layout ranges being beyond those that the client "thinks" it has. As long as the client does not assume it has layouts that are beyond what the server has granted, this is a safe practice. When a client forgets what ranges and layouts it has, and it receives a CB_LAYOUTRECALL operation, the clientMUST<bcp14>MUST</bcp14> follow up with a LAYOUTRETURN for what the server recalled, or alternatively return the NFS4ERR_NOMATCHING_LAYOUT error if it has no layout to return in the recalled range.</t> <t></li> <li> In order to avoid errors, it is vital that a client not assign itself layout permissions beyond what the server has granted, and that the server not forget layout permissions that have been granted. On the other hand, if a server believes that a client holds a layout that the client does not know about, it is useful for the client to cleanly indicate completion of the requested recall either by sending a LAYOUTRETURN operation for the entire requested range or by returning an NFS4ERR_NOMATCHING_LAYOUT error to the CB_LAYOUTRECALL.</t> </list> </t></li> </ul> <t> Thus, in light of the above, it is useful for a server to be able to send callbacks for layout ranges it has not granted to a client, and for a client to return ranges it does not hold. A pNFS clientMUST<bcp14>MUST</bcp14> always return layouts that comprise the full range specified by the recall. Note, the full recalled layout range need not be returned as part of a single operation, but may be returned in portions. This allows the client to stage the flushing of dirty data and commits and returns of layouts. Also, it indicates to the metadata server that the client is making progress. </t> <t> When a layout is returned, the clientMUST NOT<bcp14>MUST NOT</bcp14> have any outstanding I/O requests to the storage devices involved in the layout. Rephrasing, the clientMUST NOT<bcp14>MUST NOT</bcp14> return the layout while it has outstanding I/O requests to the storage device. </t> <t> Even with this requirement for the client, it is possible that I/O requests may be presented to a storage device no longer allowed to perform them. Since the server has no strict control as to when the client will return the layout, the server may later decide to unilaterally revoke the client's access to the storage devices as provided by the layout. In choosing to revoke access, the server must deal with the possibility of lingering I/O requests, i.e., I/O requests that are still in flight to storage devices identified by the revoked layout. All layout type specificationsMUST<bcp14>MUST</bcp14> define whether unilateral layout revocation by the metadata server is supported; if it is, the specification must also describe how lingering writes are processed. For example, storage devices identified by the revoked layout could be fenced off from the client that held the layout. </t> <t> In order to ensure client/server convergence with regard to layout state, the final LAYOUTRETURN operation in a sequence of LAYOUTRETURN operations for a particular recallMUST<bcp14>MUST</bcp14> specify the entire range being recalled, echoing the recalled layout type, iomode, recall/return type (FILE, FSID, or ALL), and byte-range, even if layouts pertaining to partial ranges were previously returned. In addition, if the client holds no layouts that overlap the range being recalled, the client should return the NFS4ERR_NOMATCHING_LAYOUT error code to CB_LAYOUTRECALL. This allows the server to update its view of the client's layout state. </t> </section> <sectiontitle="Sequencinganchor="pnfs_operation_sequencing" numbered="true" toc="default"> <name>Sequencing of LayoutOperations" anchor="pnfs_operation_sequencing">Operations</name> <t> As with other stateful operations, pNFS requires the correct sequencing of layout operations. pNFS uses the "seqid" in the layout stateid to provide the correct sequencing between regular operations and callbacks. It is the server's responsibility to avoid inconsistencies regarding the layouts provided and the client's responsibility to properly serialize its layout requests and layout returns. </t> <sectiontitle="Layoutnumbered="true" toc="default"> <name>Layout Recall and ReturnSequencing">Sequencing</name> <t> One critical issue with regard to layout operations sequencing concerns callbacks. The protocol must defend against races between the reply to a LAYOUTGET or LAYOUTRETURN operation and a subsequent CB_LAYOUTRECALL. A clientMUST NOT<bcp14>MUST NOT</bcp14> process a CB_LAYOUTRECALL that implies one or more outstanding LAYOUTGET or LAYOUTRETURN operations to which the client has not yet received a reply. The client detects such a CB_LAYOUTRECALL by examining the "seqid" field of the recall's layout stateid. If the "seqid" is not exactly one higher than what the client currently has recorded, and the client has at least one LAYOUTGET and/or LAYOUTRETURN operation outstanding, the client knows the server sent the CB_LAYOUTRECALL after sending a response to an outstanding LAYOUTGET or LAYOUTRETURN. The clientMUST<bcp14>MUST</bcp14> wait before processing such a CB_LAYOUTRECALL until it processes all replies for outstanding LAYOUTGET and LAYOUTRETURN operations for the corresponding file with seqid less than the seqid given by CB_LAYOUTRECALL (lor_stateid; see <xreftarget="OP_CB_LAYOUTRECALL"/>.)target="OP_CB_LAYOUTRECALL" format="default"/>.) </t> <t> In addition to the seqid-based mechanism, <xreftarget="sessions_callback_races"/>target="sessions_callback_races" format="default"/> describes the sessions mechanism for allowing the client to detect callback race conditions and delay processing such a CB_LAYOUTRECALL. The serverMAY<bcp14>MAY</bcp14> reference conflicting operations in the CB_SEQUENCE that precedes the CB_LAYOUTRECALL. Because the server has already sent replies for these operations before sending the callback, the replies may race with the CB_LAYOUTRECALL. The clientMUST<bcp14>MUST</bcp14> wait for all the referenced calls to complete and update its view of the layout state before processing the CB_LAYOUTRECALL. </t> <sectiontitle="Get/Return Sequencing">numbered="true" toc="default"> <name>Get/Return Sequencing</name> <t> The protocol allows the client to send concurrent LAYOUTGET and LAYOUTRETURN operations to the server. The protocol does not provide any means for the server to process the requests in the same order in which they were created. However, through the use of the "seqid" field in the layout stateid, the client can determine the order in which parallel outstanding operations were processed by the server. Thus, when a layout retrieved by an outstanding LAYOUTGET operation intersects with a layout returned by an outstanding LAYOUTRETURN on the same file, the order in which the two conflicting operations are processed determines the final state of the overlapping layout. The order is determined by the "seqid" returned in each operation: the operation with the higher seqid was executed later. </t> <t> It is permissible for the client to send multiple parallel LAYOUTGET operations for the same file or multiple parallel LAYOUTRETURN operations for the same file or a mix of both. </t> <t> It is permissible for the client to use the current stateid (see <xreftarget="current_stateid"/>)target="current_stateid" format="default"/>) for LAYOUTGET operations, for example, when compounding LAYOUTGETs or compounding OPEN and LAYOUTGETs. It is also permissible to use the current stateid when compounding LAYOUTRETURNs. </t> <t> It is permissible for the client to use the current stateid when combining LAYOUTRETURN and LAYOUTGET operations for the same file in the same COMPOUND request since the serverMUST<bcp14>MUST</bcp14> process these in order. However, if a client does send such COMPOUND requests, itMUST NOT<bcp14>MUST NOT</bcp14> have more than one outstanding for the same file at the same time, and itMUST NOT<bcp14>MUST NOT</bcp14> have other LAYOUTGET or LAYOUTRETURN operations outstanding at the same time for that same file. </t> </section> <sectiontitle="Client Considerations">numbered="true" toc="default"> <name>Client Considerations</name> <t> Consider a pNFS client that has sent a LAYOUTGET, and before it receives the reply to LAYOUTGET, it receives a CB_LAYOUTRECALL for the same file with an overlapping range. There are two possibilities, which the client can distinguish via the layout stateid in the recall.<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> The server processed the LAYOUTGET before sending the recall, so the LAYOUTGET must be waited for because it may be carrying layout information that will need to be returned to deal with the CB_LAYOUTRECALL.</t> <t></li> <li> The server sent the callback before receiving the LAYOUTGET. The server will not respond to the LAYOUTGET until the CB_LAYOUTRECALL is processed.</t> </list></li> </ol> <t> If these possibilities cannot be distinguished, a deadlock could result, as the client must wait for the LAYOUTGET response before processing the recall in the first case, but that response will not arrive until after the recall is processed in the second case. Note that in the first case, the "seqid" in the layout stateid of the recall is two greater than what the client has recorded; in the second case, the "seqid" is one greater than what the client has recorded. This allows the client to disambiguate between the two cases. The client thus knows precisely which possibility applies. </t> <t> In case 1, the client knows it needs to wait for the LAYOUTGET response before processing the recall (or the client can return NFS4ERR_DELAY). </t> <t> In case 2, the client will not wait for the LAYOUTGET response before processing the recall because waiting would cause deadlock. Therefore, the action at the client will only require waiting in the case that the client has not yet seen the server's earlier responses to the LAYOUTGET operation(s). </t> <t> The recall process can be considered completed when the final LAYOUTRETURN operation for the recalled range is completed. The LAYOUTRETURN uses the layout stateid (with seqid) specified in CB_LAYOUTRECALL. If the client uses multiple LAYOUTRETURNs in processing the recall, the first LAYOUTRETURN will use the layout stateid as specified in CB_LAYOUTRECALL. Subsequent LAYOUTRETURNs will use the highest seqid as is the usual case. </t> </section> <sectiontitle="Server Considerations" anchor="layout_server_consider">anchor="layout_server_consider" numbered="true" toc="default"> <name>Server Considerations</name> <t> Consider a race from the metadata server's point of view. The metadata server has sent a CB_LAYOUTRECALL and receives an overlapping LAYOUTGET for the same file before the LAYOUTRETURN(s) that respond to the CB_LAYOUTRECALL. There are three cases:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> The client sent the LAYOUTGET before processing the CB_LAYOUTRECALL. The "seqid" in the layout stateid of the arguments of LAYOUTGET is one less than the "seqid" in CB_LAYOUTRECALL. The server returns NFS4ERR_RECALLCONFLICT to the client, which indicates to the client that there is a pending recall.</t> <t></li> <li> The client sent the LAYOUTGET after processing the CB_LAYOUTRECALL, but the LAYOUTGET arrived before the LAYOUTRETURN and the response to CB_LAYOUTRECALL that completed that processing. The "seqid" in the layout stateid of LAYOUTGET is equal to or greater than that of the "seqid" in CB_LAYOUTRECALL. The server has not received a response to the CB_LAYOUTRECALL, so it returns NFS4ERR_RECALLCONFLICT.</t> <t></li> <li> The client sent the LAYOUTGET after processing the CB_LAYOUTRECALL; the server received the CB_LAYOUTRECALL response, but the LAYOUTGET arrived before the LAYOUTRETURN that completed that processing. The "seqid" in the layout stateid of LAYOUTGET is equal to that of the "seqid" in CB_LAYOUTRECALL. The server has received a response to the CB_LAYOUTRECALL, so it returns NFS4ERR_RETURNCONFLICT.</t> </list> </t></li> </ol> </section> <sectiontitle="Wraparoundnumbered="true" toc="default"> <name>Wraparound and Validation ofSeqid">Seqid</name> <t> The rules for layout stateid processing differ from other stateids in the protocol because the "seqid" value cannot be zero and the stateid's "seqid" value changes in a CB_LAYOUTRECALL operation. The non-zero requirement combined with the inherent parallelism of layout operations means that a set of LAYOUTGET and LAYOUTRETURN operations may contain the same value for "seqid". The server uses a slightly modified version of the modulo arithmetic as described in <xref target="Slot_Identifiers_and_Server_Reply_Cache"/>format="default"/> when incrementing the layout stateid's "seqid". The difference is that zero is not a valid value for "seqid"; when the value of a "seqid" is 0xFFFFFFFF, the next valid value will be 0x00000001. The modulo arithmetic is also used for the comparisons of "seqid" values in the processing of CB_LAYOUTRECALL events as described above in <xref target="layout_server_consider"/>.format="default"/>. </t> <t> Just as the server validates the "seqid" in the event of CB_LAYOUTRECALL usage, as described in <xref target="layout_server_consider"/>,format="default"/>, the server also validates the "seqid" value to ensure that it is within an appropriate range. This range represents the degree of parallelism the server supports for layout stateids. If the client is sending multiple layout operations to the server in parallel, by definition, the "seqid" value in the supplied stateid will not be the current "seqid" as held by the server. The range of parallelism spans from the highest or current "seqid" to a "seqid" value in the past. To assist in the discussion, the server's current "seqid" value for a layout stateid is defined as SERVER_CURRENT_SEQID. The lowest "seqid" value that is acceptable to the server is represented by PAST_SEQID. And the value for the range of valid "seqid"s or range of parallelism is VALID_SEQID_RANGE. Therefore, the following holds: VALID_SEQID_RANGE = SERVER_CURRENT_SEQID - PAST_SEQID. In the following, all arithmetic is the modulo arithmetic as described above. </t> <t> The serverMUST<bcp14>MUST</bcp14> support a minimum VALID_SEQID_RANGE. The minimum is defined as: VALID_SEQID_RANGE = summation over 1..N of (ca_maxoperations(i) - 1), where N is the number of session fore channels and ca_maxoperations(i) is the value of the ca_maxoperations returned from CREATE_SESSION of the i'th session. The reason for "- 1" is to allow for the required SEQUENCE operation. The serverMAY<bcp14>MAY</bcp14> support a VALID_SEQID_RANGE value larger than the minimum. The maximum VALID_SEQID_RANGE is(2 ^ 32(2<sup>32</sup> - 2) (accounting for zero not being a valid "seqid" value). </t> <t> If the server finds the "seqid" is zero, the NFS4ERR_BAD_STATEID error is returned to the client. The server further validates the "seqid" to ensure it is within the range of parallelism, VALID_SEQID_RANGE. If the "seqid" value is outside of that range, the error NFS4ERR_OLD_STATEID is returned to the client. Upon receipt of NFS4ERR_OLD_STATEID, the client updates the stateid in the layout request based on processing of other layout requests and re-sends the operation to the server. </t> </section> <sectiontitle="Bulkanchor="bulk_layouts" numbered="true" toc="default"> <name>Bulk Recall andReturn" anchor="bulk_layouts">Return</name> <t> pNFS supports recalling and returning all layouts that are for files belonging to a particular fsid (LAYOUTRECALL4_FSID, LAYOUTRETURN4_FSID) or client ID (LAYOUTRECALL4_ALL, LAYOUTRETURN4_ALL). There are no "bulk" stateids, so detection of races via the seqid is not possible. The serverMUST NOT<bcp14>MUST NOT</bcp14> initiate bulk recall while another recall is in progress, or the corresponding LAYOUTRETURN is in progress or pending. In the event the server sends a bulk recall while the client has a pending or in-progress LAYOUTRETURN, CB_LAYOUTRECALL, or LAYOUTGET, the client returns NFS4ERR_DELAY. In the event the client sends a LAYOUTGET or LAYOUTRETURN while a bulk recall is in progress, the server returns NFS4ERR_RECALLCONFLICT. If the client sends a LAYOUTGET or LAYOUTRETURN after the server receives NFS4ERR_DELAY from a bulk recall, then to ensure forward progress, the serverMAY<bcp14>MAY</bcp14> return NFS4ERR_RECALLCONFLICT. </t> <t> Once a CB_LAYOUTRECALL of LAYOUTRECALL4_ALL is sent, the serverMUST NOT<bcp14>MUST NOT</bcp14> allow the client to use any layout stateid except for LAYOUTCOMMIT operations. Once the client receives a CB_LAYOUTRECALL of LAYOUTRECALL4_ALL, itMUST NOT<bcp14>MUST NOT</bcp14> use any layout stateid except for LAYOUTCOMMIT operations. Once a LAYOUTRETURN of LAYOUTRETURN4_ALL is sent, all layout stateids granted to the client ID are freed. The clientMUST NOT<bcp14>MUST NOT</bcp14> use the layout stateids again. ItMUST<bcp14>MUST</bcp14> use LAYOUTGET to obtain new layout stateids. </t> <t> Once a CB_LAYOUTRECALL of LAYOUTRECALL4_FSID is sent, the serverMUST NOT<bcp14>MUST NOT</bcp14> allow the client to use any layout stateid that refers to a file with the specified fsid except for LAYOUTCOMMIT operations. Once the client receives a CB_LAYOUTRECALL of LAYOUTRECALL4_ALL, itMUST NOT<bcp14>MUST NOT</bcp14> use any layout stateid that refers to a file with the specified fsid except for LAYOUTCOMMIT operations. Once a LAYOUTRETURN of LAYOUTRETURN4_FSID is sent, all layout stateids granted to the referenced fsid are freed. The clientMUST NOT<bcp14>MUST NOT</bcp14> use those freed layout stateids for files with the referenced fsid again. Subsequently, for any file with the referenced fsid, to use a layout, the clientMUST<bcp14>MUST</bcp14> first send a LAYOUTGET operation in order to obtain a new layout stateid for that file. </t> <t> If the server has sent a bulk CB_LAYOUTRECALL and receives a LAYOUTGET, or a LAYOUTRETURN with a stateid, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_RECALLCONFLICT. If the server has sent a bulk CB_LAYOUTRECALL and receives a LAYOUTRETURN with an lr_returntype that is not equal to the lor_recalltype of the CB_LAYOUTRECALL, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_RECALLCONFLICT. </t> </section> </section> </section> </section> <sectiontitle="Revoking Layouts" anchor="revoke_layout">anchor="revoke_layout" numbered="true" toc="default"> <name>Revoking Layouts</name> <t> Parallel NFS permits servers to revoke layouts from clients that fail to respond to recalls and/or fail to renew their lease in time. Depending on the layout type, the server might revoke the layout and might take certain actions with respect to the client's I/O to data servers. </t> </section> <sectiontitle="Metadataanchor="async_writes" numbered="true" toc="default"> <name>Metadata Server WritePropagation" anchor="async_writes">Propagation</name> <t> Asynchronous writes written through the metadata server may be propagated lazily to the storage devices. For data written asynchronously through the metadata server, a client performing a read at the appropriate storage device is not guaranteed to see the newly written data until a COMMIT occurs at the metadata server. While the write is pending, reads to the storage device may give out either the old data, the new data, or a mixture of new and old. Upon completion of a synchronous WRITE or COMMIT (for asynchronously written data), the metadata serverMUST<bcp14>MUST</bcp14> ensure that storage devices give out the new data and that the data has been written to stable storage. If the server implements its storage in any way such that it cannot obey these constraints, then itMUST<bcp14>MUST</bcp14> recall the layouts to prevent reads being done that cannot be handled correctly. Note that the layoutsMUST<bcp14>MUST</bcp14> be recalled prior to the server responding to the associated WRITE operations. </t> </section> </section> <sectiontitle="pNFS Mechanics">numbered="true" toc="default"> <name>pNFS Mechanics</name> <t> This section describes the operations flow taken by a pNFS client to a metadata server and storage device. </t> <t> When a pNFS client encounters a new FSID, it sends a GETATTR to the NFSv4.1 server for the fs_layout_type (<xref target="attrdef_fs_layout_type"/>)format="default"/>) attribute. If the attribute returns at least one layout type, and the layout types returned are among the set supported by the client, the client knows that pNFS is a possibility for the file system. If, from the server that returned the new FSID, the client does not have a client ID that came from an EXCHANGE_ID result that returned EXCHGID4_FLAG_USE_PNFS_MDS, itMUST<bcp14>MUST</bcp14> send an EXCHANGE_ID to the server with the EXCHGID4_FLAG_USE_PNFS_MDS bit set. If the server's response does not have EXCHGID4_FLAG_USE_PNFS_MDS, then contrary to what the fs_layout_type attribute said, the server does not support pNFS, and the client will not be able use pNFS to that server; in this case, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOTSUPP in response to any pNFS operation. </t> <t> The client then creates a session, requesting a persistent session, so that exclusive creates can be done with single round trip via the createmode4 of GUARDED4. If the session ends up not being persistent, the client will use EXCLUSIVE4_1 for exclusive creates. </t> <t> If a file is to be created on a pNFS-enabled file system, the client uses the OPEN operation. With the normal set of attributes that may be provided upon OPEN used for creation, there is anOPTIONAL<bcp14>OPTIONAL</bcp14> layout_hint attribute. The client's use of layout_hint allows the client to express its preference for a layout type and its associated layout details. The use of a createmode4 of UNCHECKED4, GUARDED4, or EXCLUSIVE4_1 will allow the client to provide the layout_hint attribute at create time. The clientMUST NOT<bcp14>MUST NOT</bcp14> use EXCLUSIVE4 (see <xreftarget="exclusive_create"/>).target="exclusive_create" format="default"/>). The client isRECOMMENDED<bcp14>RECOMMENDED</bcp14> to combine a GETATTR operation after the OPEN within the same COMPOUND. The GETATTR may then retrieve the layout_type attribute for the newly created file. The client will then know what layout type the server has chosen for the file and therefore what storage protocol the client must use. </t> <t> If the client wants to open an existing file, then it also includes a GETATTR to determine what layout type the file supports. </t> <t> The GETATTR in either the file creation or plain file open case can also include the layout_blksize and layout_alignment attributes so that the client can determine optimal offsets and lengths for I/O on the file. </t> <t> Assuming the client supports the layout type returned by GETATTR and it chooses to use pNFS for data access, it then sends LAYOUTGET using the filehandle and stateid returned by OPEN, specifying the range it wants to do I/O on. The response is a layout, which may be a subset of the range for which the client asked. It also includes device IDs and a description of how data is organized (or in the case of writing, how data is to be organized) across the devices. The device IDs and data description are encoded in a format that is specific to the layout type, but the client is expected to understand. </t> <t> When the client wants to send an I/O, it determines to which device ID it needs to send the I/O command by examining the data description in the layout. It then sends a GETDEVICEINFO to find the device address(es) of the device ID. The client then sends the I/O request to one of device ID's device addresses, using the storage protocol defined for the layout type. Note that if a client has multiple I/Os to send, these I/O requests may be done in parallel. </t> <t> If the I/O was a WRITE, then at some point the client may want to use LAYOUTCOMMIT to commit the modification time and the new size of the file (if it believes it extended the file size) to the metadata server and the modified data to the file system. </t> </section> <sectiontitle="Recovery" anchor="crash_recovery">anchor="crash_recovery" numbered="true" toc="default"> <name>Recovery</name> <t> Recovery is complicated by the distributed nature of the pNFS protocol. In general, crash recovery for layouts is similar to crash recovery for delegations in the base NFSv4.1 protocol. However, the client's ability to perform I/O without contacting the metadata server introduces subtleties that must be handled correctly if the possibility of file system corruption is to be avoided. </t> <sectiontitle="Recoveryanchor="pnfs_client_recovery" numbered="true" toc="default"> <name>Recovery from ClientRestart" anchor="pnfs_client_recovery">Restart</name> <t> Client recovery for layouts is similar to client recovery for other lock and delegation state. When a pNFS client restarts, it will lose all information about the layouts that it previously owned. There are two methods by which the server can reclaim these resources and allow otherwise conflicting layouts to be provided to other clients. </t> <t> The first is through the expiry of the client's lease. If the client recovery time is longer than the lease period, the client's lease will expire and the server will know that state may be released. For layouts, the server may release the state immediately upon lease expiry or it may allow the layout to persist, awaiting possible lease revival, as long as no other layout conflicts. </t> <t> The second is through the client restarting in less time than it takes for the lease period to expire. In such a case, the client will contact the server through the standard EXCHANGE_ID protocol. The server will find that the client's co_ownerid matches the co_ownerid of the previous client invocation, but that the verifier is different. The server uses this as a signal to release all layout state associated with the client's previous invocation. In this scenario, the data written by the client but not covered by a successful LAYOUTCOMMIT is in an undefined state; it may have been written or it may now be lost. This is acceptable behavior and it is the client's responsibility to use LAYOUTCOMMIT to achieve the desired level of stability. </t> </section> <sectiontitle="Dealinganchor="lease_expiration_client" numbered="true" toc="default"> <name>Dealing with Lease Expiration on theClient" anchor="lease_expiration_client">Client</name> <t anchor="pnfs_clnt_case1"> If a client believes its lease has expired, itMUST NOT<bcp14>MUST NOT</bcp14> send I/O to the storage device until it has validated its lease. The client can send a SEQUENCE operation to the metadata server. If the SEQUENCE operation is successful, but sr_status_flag has SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED, SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED, or SEQ4_STATUS_ADMIN_STATE_REVOKED set, the clientMUST NOT<bcp14>MUST NOT</bcp14> use currently held layouts. The client has two choices to recover from the lease expiration. First, for all modified but uncommitted data, the client writes it to the metadata server using the FILE_SYNC4 flag for the WRITEs, or WRITE and COMMIT. Second, the client re-establishes a client ID and session with the server and obtains new layouts and device-ID-to-device-address mappings for the modified data ranges and then writes the data to the storage devices with the newly obtained layouts. </t> <t anchor="pnfs_clnt_case2"> If sr_status_flags from the metadata server has SEQ4_STATUS_RESTART_RECLAIM_NEEDED set (or SEQUENCE returns NFS4ERR_BAD_SESSION and CREATE_SESSION returns NFS4ERR_STALE_CLIENTID), then the metadata server has restarted, and the clientSHOULD<bcp14>SHOULD</bcp14> recover using the methods described in <xref target="mds_recovery"/>.format="default"/>. </t> <t anchor="pnfs_clnt_case3"> If sr_status_flags from the metadata server has SEQ4_STATUS_LEASE_MOVED set, then the client recovers by following the procedure described in <xreftarget="transferred_lease"/>.target="transferred_lease" format="default"/>. After that, the client may get an indication that the layout state was not moved with the file system. The client recovers as in the other applicable situations discussed in the first two paragraphs of this section. </t> <t anchor="pnfs_clnt_case4"> If sr_status_flags reports no loss of state, then the lease for the layouts that the client has are valid and renewed, and the client can once again send I/O requests to the storage devices. </t> <t> While clientsSHOULD NOT<bcp14>SHOULD NOT</bcp14> send I/Os to storage devices that may extend past the lease expiration time period, this is not always possible, for example, an extended network partition that starts after the I/O is sent and does not heal until the I/O request is received by the storage device. Thus, the metadata server and/or storage devices are responsible for protecting themselves from I/Os that are both sent before the lease expires and arrive after the lease expires. See <xref target="lease_expiration_mds"/>.format="default"/>. </t> </section> <sectiontitle="Dealinganchor="lease_expiration_mds" numbered="true" toc="default"> <name>Dealing with Loss of Layout State on the MetadataServer" anchor="lease_expiration_mds">Server</name> <t> This is a description of the case where all of the following are true:<list style="symbols"> <t></t> <ul spacing="normal"> <li> the metadata server has not restarted</t> <t></li> <li> a pNFS client's layouts have been discarded (usually because the client's lease expired) and are invalid</t> <t></li> <li> an I/O from the pNFS client arrives at the storage device</t> </list></li> </ul> <t> The metadata server and its storage devicesMUST<bcp14>MUST</bcp14> solve this by fencing the client. In other words, theyMUST<bcp14>MUST</bcp14> solve this by preventing the execution of I/O operations from the client to the storage devices after layout state loss. The details of how fencing is done are specific to the layout type. The solution for NFSv4.1 file-based layouts is described in (<xref target="file_layout_revoke"/>),format="default"/>), and solutions for other layout types are in their respective external specification documents. </t> </section> <sectiontitle="Recoveryanchor="mds_recovery" numbered="true" toc="default"> <name>Recovery from Metadata ServerRestart" anchor="mds_recovery">Restart</name> <t> The pNFS client will discover that the metadata server has restarted via the methods described in <xref target="server_failure"/>format="default"/> and discussed in a pNFS-specific context in <xref target="pnfs_clnt_case2"/>.format="default"/>. The clientMUST<bcp14>MUST</bcp14> stop using layouts and delete the device ID to device address mappings it previously received from the metadata server. Having done that, if the client wrote data to the storage device without committing the layouts via LAYOUTCOMMIT, then the client has additional work to do in order to have the client, metadata server, and storage device(s) all synchronized on the state of the data.<list style='symbols'></t> <ul spacing="normal"> <li> <t> If the client has data still modified and unwritten in the client's memory, the client has only two choices.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The client can obtain a layout via LAYOUTGET after the server's grace period and write the data to the storage devices.</t> <t></li> <li> The client can WRITE that data through the metadata server using the WRITE (<xref target="OP_WRITE"/>)format="default"/>) operation, and then obtain layouts as desired.</t> </list> </t> <t></li> </ol> </li> <li> If the client asynchronously wrote data to the storage device, but still has a copy of the data in its memory, then it has available to it the recovery options listed above in the previous bullet point. If the metadata server is also in its grace period, the client has available to it the options below in the next bullet point.</t></li> <li> <t> The client does not have a copy of the data in its memory and the metadata server is still in its grace period. The client cannot use LAYOUTGET (within or outside the grace period) to reclaim a layout because the contents of the response from LAYOUTGET may not match what it had previously. The range might be different or the client might get the same range but the content of the layout might be different. Even if the content of the layout appears to be the same, the device IDs may map to different device addresses, and even if the device addresses are the same, the device addresses could have been assigned to a different storage device. The option of retrieving the data from the storage device and writing it to the metadata server per the recovery scenario described above is not available because, again, the mappings of range to device ID, device ID to device address, and device address to physical device are stale, and new mappings via new LAYOUTGET do not solve the problem.<vspace blankLines='1' /></t> <t> The only recovery option for this scenario is to send a LAYOUTCOMMIT in reclaim mode, which the metadata server will accept as long as it is in its grace period. The use of LAYOUTCOMMIT in reclaim mode informs the metadata server that the layout has changed. It is critical that the metadata server receive this information before its grace period ends, and thus before it starts allowing updates to the file system.<vspace blankLines='1' /></t> <t> To send LAYOUTCOMMIT in reclaim mode, the client sets the loca_reclaim field of the operation's arguments (<xreftarget="OP_LAYOUTCOMMIT_ARGUMENT"/>)target="OP_LAYOUTCOMMIT_ARGUMENT" format="default"/>) to TRUE. During the metadata server's recovery grace period (and only during the recovery grace period) the metadata server is prepared to accept LAYOUTCOMMIT requests with the loca_reclaim field set to TRUE.<vspace blankLines='1' /></t> <t> When loca_reclaim is TRUE, the client is attempting to commit changes to the layout that occurred prior to the restart of the metadata server. The metadata server applies some consistency checks on the loca_layoutupdate field of the arguments to determine whether the client can commit the data written to the storage device to the file system. The loca_layoutupdate field is of data type layoutupdate4 and contains layout-type-specific content (in the lou_body field of loca_layoutupdate). The layout-type-specific information that loca_layoutupdate might have is discussed in <xref target="layoutcommit_update"/>.format="default"/>. If the metadata server's consistency checks on loca_layoutupdate succeed, then the metadata serverMUST<bcp14>MUST</bcp14> commit the data (as described by the loca_offset, loca_length, and loca_layoutupdate fields of the arguments) that was written to the storage device. If the metadata server's consistency checks on loca_layoutupdate fail, the metadata server rejects the LAYOUTCOMMIT operation and makes no changes to the file system. However, any time LAYOUTCOMMIT with loca_reclaim TRUE fails, the pNFS client has lost all the data in the range defined by <loca_offset, loca_length>. A client can defend against this risk by caching all data, whether written synchronously or asynchronously in its memory, and by not releasing the cached data until a successful LAYOUTCOMMIT. This condition does not hold true for all layout types; for example, file-based storage devices need not suffer from this limitation. </t><t></li> <li> The client does not have a copy of the data in its memory and the metadata server is no longer in its grace period; i.e., the metadata server returns NFS4ERR_NO_GRACE. As with the scenario in the above bullet point, the failure of LAYOUTCOMMIT means the data in the range <loca_offset, loca_length> lost. The defense against the risk is the same -- cache all written data on the client until a successful LAYOUTCOMMIT.</t> </list> </t></li> </ul> </section> <sectiontitle="Operationsanchor="pnfs_grace_exception" numbered="true" toc="default"> <name>Operations during Metadata Server GracePeriod" anchor="pnfs_grace_exception">Period</name> <t> Some of the recovery scenarios thus far noted that some operations (namely, WRITE and LAYOUTGET) might be permitted during the metadata server's grace period. The metadata server may allow these operations during its grace period. For LAYOUTGET, the metadata server must reliably determine that servicing such a request will not conflict with an impending LAYOUTCOMMIT reclaim request. For WRITE, the metadata server must reliably determine that servicing the request will not conflict with an impending OPEN or with a LOCK where the file has mandatory byte-range locking enabled. </t> <t> As mentioned previously, for expediency, the metadata server might reject some operations (namely, WRITE and LAYOUTGET) during its grace period, because the simplest correct approach is to reject all non-reclaim pNFS requests and WRITE operations by returning the NFS4ERR_GRACE error. However, depending on the storage protocol (which is specific to the layout type) and metadata server implementation, the metadata server may be able to determine that a particular request is safe. For example, a metadata server may save provisional allocation mappings for each file to stable storage, as well as information about potentially conflicting OPEN share modes and mandatory byte-range locks that might have been in effect at the time of restart, and the metadata server may use this information during the recovery grace period to determine that a WRITE request is safe. </t> </section> <section anchor="storage_device_recovery"title="Storagenumbered="true" toc="default"> <name>Storage DeviceRecovery">Recovery</name> <t> Recovery from storage device restart is mostly dependent upon the layout type in use. However, there are a few general techniques a client can use if it discovers a storage device has crashed while holding modified, uncommitted data that was asynchronously written. First and foremost, it is important to realize that the client is the only one that has the information necessary to recover non-committed data since it holds the modified data and probably nothing else does. Second, the best solution is for the client to err on the side of caution and attempt to rewrite the modified data through another path. </t> <t> The clientSHOULD<bcp14>SHOULD</bcp14> immediately WRITE the data to the metadata server, with the stable field in the WRITE4args set to FILE_SYNC4. Once it does this, there is no need to wait for the original storage device. </t> </section> </section> <sectiontitle="Metadatanumbered="true" toc="default"> <name>Metadata and Storage DeviceRoles">Roles</name> <t> If the same physical hardware is used to implement both a metadata server and storage device, then the same hardware entity is to be understood to be implementing two distinct roles and it is important that it be clearly understood on behalf of which role the hardware is executing at any given time. </t> <t> Two sub-cases can be distinguished.<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> The storage device uses NFSv4.1 as the storage protocol, i.e., the same physical hardware is used to implement both a metadata and data server. See <xref target="pnfs_session_stuff"/>format="default"/> for a description of how multiple roles are handled.</t> <t></li> <li> The storage device does not use NFSv4.1 as the storage protocol, and the same physical hardware is used to implement both a metadata and storage device. Whether distinct network addresses are used to access the metadata server and storage device is immaterial. This is because it is always clear to the pNFS client and server, from the upper-layer protocol being used (NFSv4.1 or non-NFSv4.1), to which role the request to the common server network address is directed.</t> </list> </t></li> </ol> </section> <sectiontitle="Securityanchor="security_considerations_pnfs" numbered="true" toc="default"> <name>Security Considerations forpNFS" anchor="security_considerations_pnfs">pNFS</name> <t> pNFS separates file system metadata and data and provides access to both. There are pNFS-specific operations (listed in <xref target="pnfs_ops"/>)format="default"/>) that provide access to the metadata; all existing NFSv4.1 conventional (non-pNFS) security mechanisms and features apply to accessing the metadata. The combination of components in a pNFS system (see <xref target="fig_system"/>)format="default"/>) is required to preserve the security properties of NFSv4.1 with respect to an entity that is accessing a storage device from a client, including security countermeasures to defend against threats for which NFSv4.1 provides defenses in environments where these threats are considered significant. </t> <t> In some cases, the security countermeasures for connections to storage devices may take the form of physical isolation or a recommendation to avoid the use of pNFS in an environment. For example, it may be impractical to provide confidentiality protection for some storage protocols to protect against eavesdropping. In environments where eavesdropping on such protocols is of sufficient concern to require countermeasures, physical isolation of the communication channel (e.g., via direct connection from client(s) to storage device(s)) and/or a decision to forgo use of pNFS (e.g., and fall back to conventional NFSv4.1) may be appropriate courses of action. </t> <t> Where communication with storage devices is subject to the same threats as client-to-metadata server communication, the protocols used for that communication need to provide security mechanisms as strong as or no weaker than those available via RPCSEC_GSS for NFSv4.1. Except for the storage protocol used for the LAYOUT4_NFSV4_1_FILES layout (see <xreftarget="file_layout_type"/>),target="file_layout_type" format="default"/>), i.e., except for NFSv4.1, it is beyond the scope of this document to specify the security mechanisms for storage access protocols. </t> <t> pNFS implementationsMUST NOT<bcp14>MUST NOT</bcp14> remove NFSv4.1's access controls. The combination of clients, storage devices, and the metadata server are responsible for ensuring that all client-to-storage-device file data access respects NFSv4.1's ACLs and file open modes. This entails performing both of these checks on every access in the client, the storage device, or both (as applicable; when the storage device is an NFSv4.1 server, the storage device is ultimately responsible for controlling access as described in <xreftarget="state_propagation"/>).target="state_propagation" format="default"/>). If a pNFS configuration performs these checks only in the client, the risk of a misbehaving client obtaining unauthorized access is an important consideration in determining when it is appropriate to use such a pNFS configuration. Such layout typesSHOULD NOT<bcp14>SHOULD NOT</bcp14> be used when client-only access checks do not provide sufficient assurance that NFSv4.1 access control is being applied correctly. (This is not a problem for the file layout type described in <xreftarget="file_layout_type"/>target="file_layout_type" format="default"/> because the storage access protocol for LAYOUT4_NFSV4_1_FILES is NFSv4.1, and thus the security model for storage device access via LAYOUT4_NFSv4_1_FILES is the same as that of the metadata server.) For handling of access control specific to a layout, the reader should examine the layout specification, such as the <xreftarget="file_layout_type">NFSv4.1/file-basedtarget="file_layout_type" format="default">NFSv4.1/file-based layout</xref> of this document, the <xreftarget="RFC5663">blockstarget="RFC5663" format="default">blocks layout</xref>, and <xreftarget="RFC5664">objectstarget="RFC5664" format="default">objects layout</xref>. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="NFSv4.1anchor="file_layout_type" numbered="true" toc="default"> <name>NFSv4.1 as a Storage Protocol in pNFS: the File LayoutType" anchor="file_layout_type">Type</name> <t> This section describes the semantics and format of NFSv4.1 file-based layouts for pNFS. NFSv4.1 file-based layouts use the LAYOUT4_NFSV4_1_FILES layout type. The LAYOUT4_NFSV4_1_FILES type defines striping data across multiple NFSv4.1 data servers. </t> <sectiontitle="Clientanchor="pnfs_session_stuff" numbered="true" toc="default"> <name>Client ID and SessionConsiderations" anchor="pnfs_session_stuff">Considerations</name> <t> Sessions are aREQUIRED<bcp14>REQUIRED</bcp14> feature of NFSv4.1, and this extends to both the metadata server and file-based (NFSv4.1-based) data servers. </t> <t> The role a server plays in pNFS is determined by the result it returns from EXCHANGE_ID. The roles are:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Metadata server (EXCHGID4_FLAG_USE_PNFS_MDS is set in the result eir_flags).</t> <t></li> <li> Data server (EXCHGID4_FLAG_USE_PNFS_DS).</t> <t></li> <li> Non-metadata server (EXCHGID4_FLAG_USE_NON_PNFS). This is an NFSv4.1 server that does not support operations (e.g., LAYOUTGET) or attributes that pertain to pNFS.</t> </list> </t></li> </ul> <t> The clientMAY<bcp14>MAY</bcp14> request zero or more of EXCHGID4_FLAG_USE_NON_PNFS, EXCHGID4_FLAG_USE_PNFS_DS, or EXCHGID4_FLAG_USE_PNFS_MDS, even though some combinations (e.g., EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_USE_PNFS_MDS) are contradictory. However, the serverMUST<bcp14>MUST</bcp14> only return the following acceptable combinations: </t><texttable> <ttcol>Acceptable<table align="center"> <thead> <tr> <th align="left">Acceptable Results fromEXCHANGE_ID</ttcol> <c>EXCHANGE_ID</th> </tr> </thead> <tbody> <tr> <td align="left"> EXCHGID4_FLAG_USE_PNFS_MDS</c> <c></td> </tr> <tr> <td align="left"> EXCHGID4_FLAG_USE_PNFS_MDS | EXCHGID4_FLAG_USE_PNFS_DS</c> <c></td> </tr> <tr> <td align="left"> EXCHGID4_FLAG_USE_PNFS_DS</c> <c></td> </tr> <tr> <td align="left"> EXCHGID4_FLAG_USE_NON_PNFS</c> <c></td> </tr> <tr> <td align="left"> EXCHGID4_FLAG_USE_PNFS_DS | EXCHGID4_FLAG_USE_NON_PNFS</c> </texttable></td> </tr> </tbody> </table> <t> As the above table implies, a server can have one or two roles. A server can be both a metadata server and a data server, or it can be both a data server and non-metadata server. In addition to returning two roles in the EXCHANGE_ID's results, and thus serving both roles via a common client ID, a server can serve two roles by returning a unique client ID and server owner for each role in each of two EXCHANGE_ID results, with each result indicating each role. </t> <t> In the case of a server with concurrent pNFS roles that are served by a common client ID, if the EXCHANGE_ID request from the client has zero or a combination of the bits set in eia_flags, the server result should set bits that represent the higher of the acceptable combination of the server roles, with a preference to match the roles requested by the client. Thus, if a client request has (EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_USE_PNFS_MDS | EXCHGID4_FLAG_USE_PNFS_DS) flags set, and the server is both a metadata server and a data server, serving both the roles by a common client ID, the serverSHOULD<bcp14>SHOULD</bcp14> return with (EXCHGID4_FLAG_USE_PNFS_MDS | EXCHGID4_FLAG_USE_PNFS_DS) set. </t> <t> In the case of a server that has multiple concurrent pNFS roles, each role served by a unique client ID, if the client specifies zero or a combination of roles in the request, the server resultsSHOULD<bcp14>SHOULD</bcp14> return only one of the roles from the combination specified by the client request. If the role specified by the server result does not match the intended use by the client, the client should send the EXCHANGE_ID specifying just the interested pNFS role. </t> <t> If a pNFS metadata client gets a layout that refers it to an NFSv4.1 data server, it needs a client ID on that data server. If it does not yet have a client ID from the server that had the EXCHGID4_FLAG_USE_PNFS_DS flag set in the EXCHANGE_ID results, then the client needs to send an EXCHANGE_ID to the data server, using the same co_ownerid as it sent to the metadata server, with the EXCHGID4_FLAG_USE_PNFS_DS flag set in the arguments. If the server's EXCHANGE_ID results have EXCHGID4_FLAG_USE_PNFS_DS set, then the client may use the client ID to create sessions that will exchange pNFS data operations. The client ID returned by the data server has no relationship with the client ID returned by a metadata server unless the client IDs are equal, and the server owners and server scopes of the data server and metadata server are equal. </t> <t> In NFSv4.1, the session ID in the SEQUENCE operation implies the client ID, which in turn might be used by the server to map the stateid to the right client/server pair. However, when a data server is presented with a READ or WRITE operation with a stateid, because the stateid is associated with a client ID on a metadata server, and because the session ID in the preceding SEQUENCE operation is tied to the client ID of the data server, the data server has no obvious way to determine the metadata server from the COMPOUND procedure, and thus has no way to validate the stateid. OneRECOMMENDED<bcp14>RECOMMENDED</bcp14> approach is for pNFS servers to encode metadata server routing and/or identity information in the data server filehandles as returned in the layout. </t> <t> If metadata server routing and/or identity information is encoded in data server filehandles, when the metadata server identity or location changes, the data server filehandles it gave out will become invalid (stale), and so the metadata serverMUST<bcp14>MUST</bcp14> first recall the layouts. Invalidating a data server filehandle does not render the NFS client's data cache invalid. The client's cache should map a data server filehandle to a metadata server filehandle, and a metadata server filehandle to cached data. </t> <t> If a server is both a metadata server and a data server, the server might need to distinguish operations on files that are directed to the metadata server from those that are directed to the data server. It isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the values of the filehandles returned by the LAYOUTGET operation be different than the value of the filehandle returned by the OPEN of the same file. </t> <t> Another scenario is for the metadata server and the storage device to be distinct from one client's point of view, and the roles reversed from another client's point of view. For example, in the cluster file system model, a metadata server to one client might be a data server to another client. If NFSv4.1 is being used as the storage protocol, then pNFS servers need to encode the values of filehandles according to their specific roles. </t> <section anchor="dsonly"title="Sessionsnumbered="true" toc="default"> <name>Sessions Considerations for DataServers">Servers</name> <t> <xref target="Obligations_of_the_Client"/>format="default"/> states that a client has to keep its lease renewed in order to prevent a session from being deleted by the server. If the reply to EXCHANGE_ID has just the EXCHGID4_FLAG_USE_PNFS_DS role set, then (as noted in <xreftarget="ds_ops"/>)target="ds_ops" format="default"/>) the client will not be able to determine the data server's lease_time attribute because GETATTR will not be permitted. Instead, the rule is that any time a client receives a layout referring it to a data server that returns just the EXCHGID4_FLAG_USE_PNFS_DS role, the clientMAY<bcp14>MAY</bcp14> assume that the lease_time attribute from the metadata server that returned the layout applies to the data server. Thus, the data serverMUST<bcp14>MUST</bcp14> be aware of the values of all lease_time attributes of all metadata servers for which it is providing I/O, and itMUST<bcp14>MUST</bcp14> use the maximum of all such lease_time values as the lease interval for all client IDs and sessions established on it. </t> <t> For example, if one metadata server has a lease_time attribute of 20 seconds, and a second metadata server has a lease_time attribute of 10 seconds, then if both servers return layouts that refer to an EXCHGID4_FLAG_USE_PNFS_DS-only data server, the data serverMUST<bcp14>MUST</bcp14> renew a client's lease if the interval between two SEQUENCE operations on different COMPOUND requests is less than 20 seconds. </t> </section> </section> <sectiontitle="Fileanchor="file_layout_definitions" numbered="true" toc="default"> <name>File LayoutDefinitions" anchor="file_layout_definitions">Definitions</name> <t> The following definitions apply to the LAYOUT4_NFSV4_1_FILES layout type and may be applicable to other layout types.<list style='hanging'> <t hangText="Unit."></t> <dl newline="false" spacing="normal"> <dt>Unit.</dt> <dd> A unit is a fixed-size quantity of data written to a data server.</t> <t hangText="Pattern."></dd> <dt>Pattern.</dt> <dd> A pattern is a method of distributing one or more equal sized units across a set of data servers. A pattern is iterated one or more times.</t> <t hangText="Stripe."></dd> <dt>Stripe.</dt> <dd> A stripe is a set of data distributed across a set of data servers in a pattern before that pattern repeats.</t> <t hangText="Stripe Count."></dd> <dt>Stripe Count.</dt> <dd> A stripe count is the number of units in a pattern.</t> <t hangText="Stripe Width."></dd> <dt>Stripe Width.</dt> <dd> A stripe width is the size of a stripe in bytes. The stripe width = the stripe count * the size of the stripe unit.</t> </list></dd> </dl> <t> Hereafter, this document will refer to a unit that is a written in a pattern as a "stripe unit". </t> <t> A pattern may have more stripe units than data servers. If so, some data servers will have more than one stripe unit per stripe. A data server that has multiple stripe units per stripeMAY<bcp14>MAY</bcp14> store each unit in a different data file (and depending on the implementation, will possibly assign a unique data filehandle to each data file). </t> </section><!-- "File Striping Definitions" "file_layout_definitions" --><sectiontitle="Fileanchor="file_data_types" numbered="true" toc="default"> <name>File Layout DataTypes" anchor="file_data_types">Types</name> <t> The high level NFSv4.1 layout types are nfsv4_1_file_layouthint4, nfsv4_1_file_layout_ds_addr4, and nfsv4_1_file_layout4. </t> <t> The SETATTR operation supports a layout hint attribute (<xref target="attrdef_layout_hint"/>).format="default"/>). When the client sets a layout hint (data type layouthint4) with a layout type of LAYOUT4_NFSV4_1_FILES (the loh_type field), the loh_body field contains a value of data type nfsv4_1_file_layouthint4. </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ const NFL4_UFLG_MASK = 0x0000003F; const NFL4_UFLG_DENSE = 0x00000001; const NFL4_UFLG_COMMIT_THRU_MDS = 0x00000002; const NFL4_UFLG_STRIPE_UNIT_SIZE_MASK = 0xFFFFFFC0; typedef uint32_t nfl_util4;</artwork> </figure> <figure> <artwork>enum filelayout_hint_care4 { NFLH4_CARE_DENSE = NFL4_UFLG_DENSE, NFLH4_CARE_COMMIT_THRU_MDS = NFL4_UFLG_COMMIT_THRU_MDS, NFLH4_CARE_STRIPE_UNIT_SIZE = 0x00000040, NFLH4_CARE_STRIPE_COUNT = 0x00000080 }; /* Encoded in the loh_body field of data type layouthint4: */ struct nfsv4_1_file_layouthint4 { uint32_t nflh_care; nfl_util4 nflh_util; count4 nflh_stripe_count; };</artwork> </figure>]]></sourcecode> <t> The generic layout hint structure is described in <xref target="layouthint4"/>.format="default"/>. The client uses the layout hint in the layout_hint (<xref target="attrdef_layout_hint"/>)format="default"/>) attribute to indicate the preferred type of layout to be used for a newly created file. The LAYOUT4_NFSV4_1_FILES layout-type-specific content for the layout hint is composed of three fields. The first field, nflh_care, is a set of flags indicating which values of the hint the client cares about. If the NFLH4_CARE_DENSE flag is set, then the client indicates in the second field, nflh_util, a preference for how the data file is packed (<xref target="sparse_dense"/>),format="default"/>), which is controlled by the value of the expression nflh_util & NFL4_UFLG_DENSE ("&" represents the bitwise AND operator). If the NFLH4_CARE_COMMIT_THRU_MDS flag is set, then the client indicates a preference for whether the client should send COMMIT operations to the metadata server or data server (<xref target="commit_thru_mds"/>),format="default"/>), which is controlled by the value of nflh_util & NFL4_UFLG_COMMIT_THRU_MDS. If the NFLH4_CARE_STRIPE_UNIT_SIZE flag is set, the client indicates its preferred stripe unit size, which is indicated in nflh_util & NFL4_UFLG_STRIPE_UNIT_SIZE_MASK (thus, the stripe unit sizeMUST<bcp14>MUST</bcp14> be a multiple of 64 bytes). The minimum stripe unit size is 64 bytes. If the NFLH4_CARE_STRIPE_COUNT flag is set, the client indicates in the third field, nflh_stripe_count, the stripe count. The stripe count multiplied by the stripe unit size is the stripe width. </t> <t> When LAYOUTGET returns a LAYOUT4_NFSV4_1_FILES layout (indicated in the loc_type field of the lo_content field), the loc_body field of the lo_content field contains a value of data type nfsv4_1_file_layout4. Among other content, nfsv4_1_file_layout4 has a storage device ID (field nfl_deviceid) of data type deviceid4. The GETDEVICEINFO operation maps a device ID to a storage device address (type device_addr4). When GETDEVICEINFO returns a device address with a layout type of LAYOUT4_NFSV4_1_FILES (the da_layout_type field), the da_addr_body field contains a value of data type nfsv4_1_file_layout_ds_addr4. </t><figure> <artwork><sourcecode type="xdr"><![CDATA[ typedef netaddr4multipath_list4<>;multipath_list4<>; /* * Encoded in the da_addr_body field of * data type device_addr4: */ struct nfsv4_1_file_layout_ds_addr4 { uint32_tnflda_stripe_indices<>;nflda_stripe_indices<>; multipath_list4nflda_multipath_ds_list<>;nflda_multipath_ds_list<>; };</artwork> </figure>]]></sourcecode> <t> The nfsv4_1_file_layout_ds_addr4 data type represents the device address. It is composed of two fields:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> nflda_multipath_ds_list: An array of lists of data servers, where each list can be one or more elements, and each element represents a data server address that may serve equally as the target of I/O operations (see <xref target="file_multipath"/>).format="default"/>). The length of this array might be different than the stripe count.</t> <t></li> <li> nflda_stripe_indices: An array of indices used to index into nflda_multipath_ds_list. The value of each element of nflda_stripe_indicesMUST<bcp14>MUST</bcp14> be less than the number of elements in nflda_multipath_ds_list. Each element of nflda_multipath_ds_listSHOULD<bcp14>SHOULD</bcp14> be referred to by one or more elements of nflda_stripe_indices. The number of elements in nflda_stripe_indices is always equal to the stripe count.</t> </list> </t> <figure> <artwork></li> </ol> <sourcecode type="xdr"><![CDATA[ /* * Encoded in the loc_body field of * data type layout_content4: */ struct nfsv4_1_file_layout4 { deviceid4 nfl_deviceid; nfl_util4 nfl_util; uint32_t nfl_first_stripe_index; offset4 nfl_pattern_offset; nfs_fh4nfl_fh_list<>;nfl_fh_list<>; };</artwork> </figure>]]></sourcecode> <t> The nfsv4_1_file_layout4 data type represents the layout. It is composed of the following fields:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> nfl_deviceid: The device ID that maps to a value of type nfsv4_1_file_layout_ds_addr4.</t> <t></li> <li> nfl_util: Like the nflh_util field of data type nfsv4_1_file_layouthint4, a compact representation of how the data on a file on each data server is packed, whether the client should send COMMIT operations to the metadata server or data server, and the stripe unit size. If a server returns two or more overlapping layouts, each stripe unit size in each overlapping layoutMUST<bcp14>MUST</bcp14> be the same.</t> <t></li> <li> nfl_first_stripe_index: The index into the first element of the nflda_stripe_indices array to use.</t></li> <li> <t> nfl_pattern_offset: This field is the logical offset into the file where the striping pattern starts. It is required for converting the client's logical I/O offset (e.g., the current offset in a POSIX file descriptor before the read() or write() system call is sent) into the stripe unit number (see <xreftarget="SUi"/>). <vspace blankLines='1' />target="SUi" format="default"/>). </t> <t> If dense packing is used, then nfl_pattern_offset is also needed to convert the client's logical I/O offset to an offset on the file on the data server corresponding to the stripe unit number (see <xreftarget="sparse_dense"/>). <vspace blankLines='1' />target="sparse_dense" format="default"/>). </t> <t> Note that nfl_pattern_offset is not always the same as lo_offset. For example, via the LAYOUTGET operation, a client might request a layout starting at offset 1000 of a file that has its striping pattern start at offset zero.<vspace blankLines='1' /></t> </li> <li> <t> nfl_fh_list: An array of data server filehandles for each list of data servers in each element of the nflda_multipath_ds_list array. The number of elements in nfl_fh_list depends on whether sparse or dense packing is being used.<list style='symbols'></t> <ul spacing="normal"> <li> <t> If sparse packing is being used, the number of elements in nfl_fh_listMUST<bcp14>MUST</bcp14> be one of three values:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Zero. This means that filehandles used for each data server are the same as the filehandle returned by the OPEN operation from the metadata server.</t> <t></li> <li> One. This means that every data server uses the same filehandle: what is specified in nfl_fh_list[0].</t> <t></li> <li> The same number of elements in nflda_multipath_ds_list. Thus, in this case, when sending an I/O operation to any data server in nflda_multipath_ds_list[X], the filehandle in nfl_fh_list[X]MUST<bcp14>MUST</bcp14> be used.</t> </list></li> </ul> <t> See the discussion on sparse packing in <xref target="sparse_dense"/>. <vspace blankLines='1' />format="default"/>. </t> </li> <li> <t> If dense packing is being used, the number of elements in nfl_fh_listMUST<bcp14>MUST</bcp14> be the same as the number of elements in nflda_stripe_indices. Thus, when sending an I/O operation to any data server in nflda_multipath_ds_list[nflda_stripe_indices[Y]], the filehandle in nfl_fh_list[Y]MUST<bcp14>MUST</bcp14> be used. In addition, any time there exists i and j, (i != j), such that the intersection of nflda_multipath_ds_list[nflda_stripe_indices[i]] and nflda_multipath_ds_list[nflda_stripe_indices[j]] is not empty, then nfl_fh_list[i]MUST NOT<bcp14>MUST NOT</bcp14> equal nfl_fh_list[j]. In other words, when dense packing is being used, if a data server appears in two or more units of a striping pattern, each reference to the data serverMUST<bcp14>MUST</bcp14> use a different filehandle.<vspace blankLines='1' /></t> <t> Indeed, if there are multiple striping patterns, as indicated by the presence of multiple objects of data type layout4 (either returned in one or multiple LAYOUTGET operations), and a data server is the target of a unit of one pattern and another unit of another pattern, then each reference to each data serverMUST<bcp14>MUST</bcp14> use a different filehandle.<vspace blankLines='1' /></t> <t> See the discussion on dense packing in <xref target="sparse_dense"/>. </t> </list>format="default"/>. </t></list></li> </ul> </li> </ol> <t> The details on the interpretation of the layout are in <xref target="file_layout_interpret"/>.format="default"/>. </t> </section><!-- "File Layout Data Types" "file_data_types" --><sectiontitle="Interpretinganchor="file_layout_interpret" numbered="true" toc="default"> <name>Interpreting the FileLayout" anchor="file_layout_interpret">Layout</name> <sectiontitle="Determininganchor="SUi" numbered="true" toc="default"> <name>Determining the Stripe UnitNumber" anchor="SUi">Number</name> <t> To find the stripe unit number that corresponds to the client's logical file offset, the pattern offset will also be used. The i'th stripe unit (SUi) is:<figure> <artwork><![CDATA[</t> <sourcecode type="pseudocode"><![CDATA[ relative_offset = file_offset - nfl_pattern_offset; SUi = floor(relative_offset /stripe_unit_size); ]]></artwork> </figure> </t>stripe_unit_size);]]></sourcecode> </section> <sectiontitle="Interpretingnumbered="true" toc="default"> <name>Interpreting the File Layout Using SparsePacking">Packing</name> <t> When sparse packing is used, the algorithm for determining the filehandle and set of data-server network addresses to write stripe unit i (SUi) to is: </t><figure> <artwork><![CDATA[<sourcecode type="pseudocode"><![CDATA[ stripe_count = number of elements in nflda_stripe_indices; j = (SUi + nfl_first_stripe_index) % stripe_count; idx = nflda_stripe_indices[j]; fh_count = number of elements in nfl_fh_list; ds_count = number of elements in nflda_multipath_ds_list; switch (fh_count) { case ds_count: fh = nfl_fh_list[idx]; break; case 1: fh = nfl_fh_list[0]; break; case 0: fh = filehandle returned by OPEN; break; default: throw a fatal exception; break; } address_list =nflda_multipath_ds_list[idx]; ]]></artwork> </figure>nflda_multipath_ds_list[idx];]]></sourcecode> <t> The client would then select a data server from address_list, and send a READ or WRITE operation using the filehandle specified in fh. </t> <t> Consider the following example: </t> <t> Suppose we have a device address consisting of seven data servers, arranged in three equivalence (<xref target="file_multipath"/>)format="default"/>) classes:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> { A, B, C, D }, { E }, { F, G }</t> </list> </t></li> </ul> <t> where A through G are network addresses. </t> <t> Then<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nflda_multipath_ds_list<> = { A, B, C, D }, { E }, { F, G }</t> </list> i.e., <list style='empty'></li> </ul> <t> i.e., </t> <ul empty="true" spacing="normal"> <li> nflda_multipath_ds_list[0] = { A, B, C, D }</t> <t></li> <li> nflda_multipath_ds_list[1] = { E }</t> <t></li> <li> nflda_multipath_ds_list[2] = { F, G }</t> </list> </t></li> </ul> <t> Suppose the striping index array is:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nflda_stripe_indices<> = { 2, 0, 1, 0 }</t> </list> </t></li> </ul> <t> Now suppose the client gets a layout that has a device ID that maps to the above device address. The initial index contains<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nfl_first_stripe_index = 2,</t> </list></li> </ul> <t> and the filehandle list is<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nfl_fh_list = { 0x36, 0x87, 0x67 }.</t> </list> </t></li> </ul> <t> If the client wants to write to SU0, the set of valid { network address, filehandle } combinations for SUi are determined by:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nfl_first_stripe_index = 2</t> </list> </t></li> </ul> <t> So<list style='empty'></t> <ul empty="true" spacing="normal"> <li> <t> idx = nflda_stripe_indices[(0 + 2) % 4]<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> = nflda_stripe_indices[2]</t> <t></li> <li> = 1</t> </list> </t> </list> </t></li> </ul> </li> </ul> <t> So<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nflda_multipath_ds_list[1] = { E }</t> </list> and <list style='empty'></li> </ul> <t> and </t> <ul empty="true" spacing="normal"> <li> nfl_fh_list[1] = { 0x87 }</t> </list> </t></li> </ul> <t> The client can thus write SU0 to { 0x87, { E } }. </t> <t> The destinations of the first 13 storage units are: </t><texttable> <ttcol>SUi</ttcol> <ttcol>filehandle</ttcol> <ttcol>data servers</ttcol> <c>0</c> <c> 87 </c><c> E </c> <c>1</c><c>36</c><c>A,B,C,D</c> <c>2</c><c>67</c><c>F,G</c> <c>3</c><c>36 </c><c>A,B,C,D</c> <c/> <c/> <c/> <c>4</c><c>87</c><c>E</c> <c>5</c><c>36</c><c>A,B,C,D</c> <c>6</c><c>67</c><c>F,G</c> <c>7</c><c>36</c><c>A,B,C,D</c> <c/> <c/> <c/> <c>8</c><c>87</c><c>E</c> <c>9</c><c>36</c><c>A,B,C,D</c> <c>10</c><c>67</c><c>F,G</c> <c>11</c><c>36</c><c>A,B,C,D</c> <c/> <c/> <c/> <c>12</c><c>87</c><c>E</c> </texttable> </section> <section title="Interpreting<!-- [rfced] We're curious why tables 9 and 10 contain blank lines? They don't appear in the original. We're trying to understand the best XML to use to format this table, and we wonder whether the breaks are necssary. --> <table align="center"> <thead> <tr> <th align="left">SUi</th> <th align="left">filehandle</th> <th align="left">data servers</th> </tr> </thead> <tbody> <tr> <td align="left">0</td> <td align="left">87 </td> <td align="left">E </td> </tr> <tr> <td align="left">1</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left">2</td> <td align="left">67</td> <td align="left">F,G</td> </tr> <tr> <td align="left">3</td> <td align="left">36 </td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left"/> <td align="left"/> <td align="left"/> </tr> <tr> <td align="left">4</td> <td align="left">87</td> <td align="left">E</td> </tr> <tr> <td align="left">5</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left">6</td> <td align="left">67</td> <td align="left">F,G</td> </tr> <tr> <td align="left">7</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left"/> <td align="left"/> <td align="left"/> </tr> <tr> <td align="left">8</td> <td align="left">87</td> <td align="left">E</td> </tr> <tr> <td align="left">9</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left">10</td> <td align="left">67</td> <td align="left">F,G</td> </tr> <tr> <td align="left">11</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left"/> <td align="left"/> <td align="left"/> </tr> <tr> <td align="left">12</td> <td align="left">87</td> <td align="left">E</td> </tr> </tbody> </table> </section> <section numbered="true" toc="default"> <name>Interpreting the File Layout Using DensePacking">Packing</name> <t> When dense packing is used, the algorithm for determining the filehandle and set of data server network addresses to write stripe unit i (SUi) to is: </t><figure> <artwork><![CDATA[<sourcecode type="pseudocode"><![CDATA[ stripe_count = number of elements in nflda_stripe_indices; j = (SUi + nfl_first_stripe_index) % stripe_count; idx = nflda_stripe_indices[j]; fh_count = number of elements in nfl_fh_list; ds_count = number of elements in nflda_multipath_ds_list; switch (fh_count) { case stripe_count: fh = nfl_fh_list[j]; break; default: throw a fatal exception; break; } address_list =nflda_multipath_ds_list[idx]; ]]></artwork> </figure>nflda_multipath_ds_list[idx];]]></sourcecode> <t> The client would then select a data server from address_list, and send a READ or WRITE operation using the filehandle specified in fh. </t> <t> Consider the following example (which is the same as the sparse packing example, except for the filehandle list): </t> <t> Suppose we have a device address consisting of seven data servers, arranged in three equivalence (<xref target="file_multipath"/>)format="default"/>) classes:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> { A, B, C, D }, { E }, { F, G }</t> </list> </t></li> </ul> <t> where A through G are network addresses. </t> <t> Then<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nflda_multipath_ds_list<> = { A, B, C, D }, { E }, { F, G }</t> </list> i.e., <list style='empty'></li> </ul> <t> i.e., </t> <ul empty="true" spacing="normal"> <li> nflda_multipath_ds_list[0] = { A, B, C, D }</t> <t></li> <li> nflda_multipath_ds_list[1] = { E }</t> <t></li> <li> nflda_multipath_ds_list[2] = { F, G }</t> </list> </t></li> </ul> <t> Suppose the striping index array is:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nflda_stripe_indices<> = { 2, 0, 1, 0 }</t> </list> </t></li> </ul> <t> Now suppose the client gets a layout that has a device ID that maps to the above device address. The initial index contains<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nfl_first_stripe_index = 2,</t> </list> and <list style='empty'></li> </ul> <t> and </t> <ul empty="true" spacing="normal"> <li> nfl_fh_list = { 0x67, 0x37, 0x87, 0x36 }.</t> </list> </t></li> </ul> <t> The interesting examples for dense packing are SU1 and SU3 because each stripe unit refers to the same data server list, yet each stripe unitMUST<bcp14>MUST</bcp14> use a different filehandle. If the client wants to write to SU1, the set of valid { network address, filehandle } combinations for SUi are determined by:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nfl_first_stripe_index = 2</t> </list> </t></li> </ul> <t> So<list style='empty'></t> <ul empty="true" spacing="normal"> <li> <t> j = (1 + 2) % 4 = 3<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> idx = nflda_stripe_indices[j]</t> <t></li> <li> = nflda_stripe_indices[3]</t> <t></li> <li> = 0</t> </list> </t> </list> </t></li> </ul> </li> </ul> <t> So<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> nflda_multipath_ds_list[0] = { A, B, C, D }</t> </list> and <list style='empty'></li> </ul> <t> and </t> <ul empty="true" spacing="normal"> <li> nfl_fh_list[3] = { 0x36 }</t> </list> </t></li> </ul> <t> The client can thus write SU1 to { 0x36, { A, B, C, D } }. </t> <t> For SU3, j = (3 + 2) % 4 = 1, and nflda_stripe_indices[1] = 0. Then nflda_multipath_ds_list[0] = { A, B, C, D }, and nfl_fh_list[1] = 0x37. The client can thus write SU3 to { 0x37, { A, B, C, D } }. </t> <t> The destinations of the first 13 storage units are: </t><texttable> <ttcol>SUi</ttcol> <ttcol>filehandle</ttcol> <ttcol>data servers</ttcol> <c>0</c> <c><table align="center"> <thead> <tr> <th align="left">SUi</th> <th align="left">filehandle</th> <th align="left">data servers</th> </tr> </thead> <tbody> <tr> <td align="left">0</td> <td align="left"> 87</c><c></td> <td align="left"> E</c> <c>1</c><c>36</c><c>A,B,C,D</c> <c>2</c><c>67</c><c>F,G</c> <c>3</c><c>37 </c><c>A,B,C,D</c> <c/> <c/> <c/> <c>4</c><c>87</c><c>E</c> <c>5</c><c>36</c><c>A,B,C,D</c> <c>6</c><c>67</c><c>F,G</c> <c>7</c><c>37</c><c>A,B,C,D</c> <c/> <c/> <c/> <c>8</c><c>87</c><c>E</c> <c>9</c><c>36</c><c>A,B,C,D</c> <c>10</c><c>67</c><c>F,G</c> <c>11</c><c>37</c><c>A,B,C,D</c> <c/> <c/> <c/> <c>12</c><c>87</c><c>E</c> </texttable> </section> <section title="Sparse</td> </tr> <tr> <td align="left">1</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left">2</td> <td align="left">67</td> <td align="left">F,G</td> </tr> <tr> <td align="left">3</td> <td align="left">37 </td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left"/> <td align="left"/> <td align="left"/> </tr> <tr> <td align="left">4</td> <td align="left">87</td> <td align="left">E</td> </tr> <tr> <td align="left">5</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left">6</td> <td align="left">67</td> <td align="left">F,G</td> </tr> <tr> <td align="left">7</td> <td align="left">37</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left"/> <td align="left"/> <td align="left"/> </tr> <tr> <td align="left">8</td> <td align="left">87</td> <td align="left">E</td> </tr> <tr> <td align="left">9</td> <td align="left">36</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left">10</td> <td align="left">67</td> <td align="left">F,G</td> </tr> <tr> <td align="left">11</td> <td align="left">37</td> <td align="left">A,B,C,D</td> </tr> <tr> <td align="left"/> <td align="left"/> <td align="left"/> </tr> <tr> <td align="left">12</td> <td align="left">87</td> <td align="left">E</td> </tr> </tbody> </table> </section> <section anchor="sparse_dense" numbered="true" toc="default"> <name>Sparse and Dense Stripe UnitPacking" anchor="sparse_dense">Packing</name> <t> The flag NFL4_UFLG_DENSE of the nfl_util4 data type (field nflh_util of the data type nfsv4_1_file_layouthint4 and field nfl_util of data type nfsv4_1_file_layout_ds_addr4) specifies how the data is packed within the data file on a data server. It allows for two different data packings: sparse and dense. The packing type determines the calculation that will be made to map the client-visible file offset to the offset within the data file located on the data server. </t> <t> If nfl_util & NFL4_UFLG_DENSE is zero, this means that sparse packing is being used. Hence, the logical offsets of the file as viewed by a client sending READs and WRITEs directly to the metadata server are the same offsets each data server uses when storing a stripe unit. The effect then, for striping patterns consisting of at least two stripe units, is for each data server file to be sparse or "holey". So for example, suppose there is a pattern with three stripe units, the stripe unit size is 4096 bytes, and there are three data servers in the pattern. Then, the file in data server 1 will have stripe units 0, 3, 6, 9, ... filled; data server 2's file will have stripe units 1, 4, 7, 10, ... filled; and data server 3's file will have stripe units 2, 5, 8, 11, ... filled. The unfilled stripe units of each file will be holes; hence, the files in each data server are sparse. </t> <t> If sparse packing is being used and a client attempts I/O to one of the holes, then an errorMUST<bcp14>MUST</bcp14> be returned by the data server. Using the above example, if data server 3 received a READ or WRITE operation for block 4, the data server would return NFS4ERR_PNFS_IO_HOLE. Thus, data servers need to understand the striping pattern in order to support sparse packing. </t> <t> If nfl_util & NFL4_UFLG_DENSE is one, this means that dense packing is being used, and the data server files have no holes. Dense packing might be selected because the data server does not (efficiently) support holey files or because the data server cannot recognize read-ahead unless there are no holes. If dense packing is indicated in the layout, the data files will be packed. Using the same striping pattern and stripe unit size that were used for the sparse packing example, the corresponding dense packing example would have all stripe units of all data files filled as follows:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Logical stripe units 0, 3, 6, ... of the file would live on stripe units 0, 1, 2, ... of the file of data server 1.</t> <t></li> <li> Logical stripe units 1, 4, 7, ... of the file would live on stripe units 0, 1, 2, ... of the file of data server 2.</t> <t></li> <li> Logical stripe units 2, 5, 8, ... of the file would live on stripe units 0, 1, 2, ... of the file of data server 3.</t> </list> </t></li> </ul> <t> Because dense packing does not leave holes on the data servers, the pNFS client is allowed to write to any offset of any data file of any data server in the stripe. Thus, the data servers need not know the file's striping pattern. </t> <t> The calculation to determine the byte offset within the data file for dense data server layouts is: </t><figure> <artwork><![CDATA[<sourcecode type="pseudocode"><![CDATA[ stripe_width = stripe_unit_size * N; where N = number of elements in nflda_stripe_indices. relative_offset = file_offset - nfl_pattern_offset; data_file_offset = floor(relative_offset / stripe_width) * stripe_unit_size + relative_offset %stripe_unit_size ]]></artwork> </figure>stripe_unit_size]]></sourcecode> <t> If dense packing is being used, and a data server appears more than once in a striping pattern, then to distinguish one stripe unit from another, the data serverMUST<bcp14>MUST</bcp14> use a different filehandle. Let's suppose there are two data servers. Logical stripe units 0, 3, 6 are served by data server 1; logical stripe units 1, 4, 7 are served by data server 2; and logical stripe units 2, 5, 8 are also served by data server 2. Unless data server 2 has two filehandles (each referring to a different data file), then, for example, a write to logical stripe unit 1 overwrites the write to logical stripe unit 2 because both logical stripe units are located in the same stripe unit (0) of data server 2. </t> </section> </section><!-- "Interpreting the File Layout" anchor="file_layout_interpret" --><sectiontitle="Dataanchor="file_multipath" numbered="true" toc="default"> <name>Data ServerMultipathing" anchor="file_multipath">Multipathing</name> <t> The NFSv4.1 file layout supports multipathing to multiple data server addresses. Data-server-level multipathing is used for bandwidth scaling via trunking (<xref target="Trunking"/>)format="default"/>) and for higher availability of use in the case of a data-server failure. Multipathing allows the client to switch to another data server address which may be that of another data server that is exporting the same data stripe unit, without having to contact the metadata server for a new layout. </t> <t> To support data server multipathing, each element of the nflda_multipath_ds_list contains an array of one more data server network addresses. This array (data type multipath_list4) represents a list of data servers (each identified by a network address), with the possibility that some data servers will appear in the list multiple times. </t> <t> The client is free to use any of the network addresses as a destination to send data server requests. If some network addresses are less optimal paths to the data than others, then the MDSSHOULD NOT<bcp14>SHOULD NOT</bcp14> include those network addresses in an element of nflda_multipath_ds_list. If less optimal network addresses exist to provide failover, theRECOMMENDED<bcp14>RECOMMENDED</bcp14> method to offer the addresses is to provide them in a replacement device-ID-to-device-address mapping, or a replacement device ID. When a client finds that no data server in an element of nflda_multipath_ds_list responds, itSHOULD<bcp14>SHOULD</bcp14> send a GETDEVICEINFO to attempt to replace the existing device-ID-to-device-address mappings. If the MDS detects that all data servers represented by an element of nflda_multipath_ds_list are unavailable, the MDSSHOULD<bcp14>SHOULD</bcp14> send a CB_NOTIFY_DEVICEID (if the client has indicated it wants device ID notifications for changed device IDs) to change the device-ID-to-device-address mappings to the available data servers. If the device ID itself will be replaced, the MDSSHOULD<bcp14>SHOULD</bcp14> recall all layouts with the device ID, and thus force the client to get new layouts and device ID mappings via LAYOUTGET and GETDEVICEINFO. </t> <t> Generally, if two network addresses appear in an element of nflda_multipath_ds_list, they will designate the same data server, and the two data server addresses will support the implementation of client ID or session trunking (the latter isRECOMMENDED)<bcp14>RECOMMENDED</bcp14>) as defined in <xreftarget="Trunking"/>.target="Trunking" format="default"/>. The two data server addresses will share the same server owner or major ID of the server owner. It is not always necessary for the two data server addresses to designate the same server with trunking being used. For example, the data could be read-only, and the data consist of exact replicas. </t> </section> <sectiontitle="Operationsanchor="ds_ops" numbered="true" toc="default"> <name>Operations Sent to NFSv4.1 DataServers" anchor="ds_ops">Servers</name> <t> Clients accessing data on an NFSv4.1 data serverMUST<bcp14>MUST</bcp14> send only the NULL procedure and COMPOUND procedures whose operations are taken only from two restricted subsets of the operations defined as valid NFSv4.1 operations. ClientsMUST<bcp14>MUST</bcp14> use the filehandle specified by the layout when accessing data on NFSv4.1 data servers. </t> <t> The first of these operation subsets consists of management operations. This subset consists of the BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CREATE_SESSION, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, SECINFO_NO_NAME, SET_SSV, and SEQUENCE operations. The client may use these operations in order to set up and maintain the appropriate client IDs, sessions, and security contexts involved in communication with the data server. Henceforth, these will be referred to as data-server housekeeping operations. </t> <t> The second subset consists of COMMIT, READ, WRITE, and PUTFH. These operationsMUST<bcp14>MUST</bcp14> be used with a current filehandle specified by the layout. In the case of PUTFH, the new current filehandleMUST<bcp14>MUST</bcp14> be one taken from the layout. Henceforth, these will be referred to as data-server I/O operations. As described in <xref target="layout_semantics"/>,format="default"/>, a clientMUST NOT<bcp14>MUST NOT</bcp14> send an I/O to a data server for which it does not hold a valid layout; the data serverMUST<bcp14>MUST</bcp14> reject such an I/O. </t> <t> Unless the server has a concurrent non-data-server personality -- i.e., EXCHANGE_ID results returned (EXCHGID4_FLAG_USE_PNFS_DS | EXCHGID4_FLAG_USE_PNFS_MDS) or (EXCHGID4_FLAG_USE_PNFS_DS | EXCHGID4_FLAG_USE_NON_PNFS) see <xreftarget="pnfs_session_stuff"/>target="pnfs_session_stuff" format="default"/> -- any attempted use of operations against a data server other than those specified in the two subsets aboveMUST<bcp14>MUST</bcp14> return NFS4ERR_NOTSUPP to the client. </t> <t> When the server has concurrent data-server and non-data-server personalities, each COMPOUND sent by the clientMUST<bcp14>MUST</bcp14> be constructed so that it is appropriate to one of the two personalities, and itMUST NOT<bcp14>MUST NOT</bcp14> contain operations directed to a mix of those personalities. The serverMUST<bcp14>MUST</bcp14> enforce this. To understand the constraints, operations within a COMPOUND are divided into the following three classes:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> An operation that is ambiguous regarding its personality assignment. This includes all of the data-server housekeeping operations. Additionally, if the server has assigned filehandles so that the ones defined by the layout are the same as those used by the metadata server, all operations using such filehandles are within this class, with the following exception. The exception is that if the operation uses a stateid that is incompatible with a data-server personality (e.g., a special stateid or the stateid has a non-zero "seqid" field, see <xreftarget="global_stateid"/>),target="global_stateid" format="default"/>), the operation is in class 3, as described below. A COMPOUND containing multiple class 1 operations (and operations of no other class)MAY<bcp14>MAY</bcp14> be sent to a server with multiple concurrent data server and non-data-server personalities.</t> <t></li> <li> An operation that is unambiguously referable to the data-server personality. This includes data-server I/O operations where the filehandle is one that can only be validly directed to the data-server personality.</t> <t></li> <li> An operation that is unambiguously referable to the non-data-server personality. This includes all COMPOUND operations that are neither data-server housekeeping nor data-server I/O operations, plus data-server I/O operations where the current fh (or the one to be made the current fh in the case of PUTFH) is only valid on the metadata server or where a stateid is used that is incompatible with the data server, i.e., is a special stateid or has a non-zero seqid value.</t> </list> </t></li> </ol> <t> When a COMPOUND first executes an operation from class 3 above, it acts as a normal COMPOUND on any other server, and the data-server personality ceases to be relevant. There are no special restrictions on the operations in the COMPOUND to limit them to those for a data server. When a PUTFH is done, filehandles derived from the layout are not valid. If their format is not normally acceptable, then NFS4ERR_BADHANDLEMUST<bcp14>MUST</bcp14> result. Similarly, current filehandles for other operations do not accept filehandles derived from layouts and are not normally usable on the metadata server. Using these will result in NFS4ERR_STALE. </t> <t> When a COMPOUND first executes an operation from class 2, which would be PUTFH where the filehandle is one from a layout, the COMPOUND henceforth is interpreted with respect to the data-server personality. Operations outside the two classes discussed aboveMUST<bcp14>MUST</bcp14> result in NFS4ERR_NOTSUPP. Filehandles are validated using the rules of the data server, resulting in NFS4ERR_BADHANDLE and/or NFS4ERR_STALE even when they would not normally do so when addressed to the non-data-server personality. Stateids must obey the rules of the data server in that any use of special stateids or stateids with non-zero seqid values must result in NFS4ERR_BAD_STATEID. </t> <t> Until the server first executes an operation from class 2 or class 3, the clientMUST NOT<bcp14>MUST NOT</bcp14> depend on the operation being executed by either the data-server or the non-data-server personality. The serverMUST<bcp14>MUST</bcp14> pick one personality consistently for a given COMPOUND, with the only possible transition being a single one when the first operation from class 2 or class 3 is executed. </t> <t> Because of the complexity induced by assigning filehandles so they can be used on both a data server and a metadata server, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that where the same server can have both personalities, the server assign separate unique filehandles to both personalities. This makes it unambiguous for which server a given request is intended. </t> <t> GETATTR and SETATTRMUST<bcp14>MUST</bcp14> be directed to the metadata server. In the case of a SETATTR of the size attribute, the control protocol is responsible for propagating size updates/truncations to the data servers. In the case of extending WRITEs to the data servers, the new size must be visible on the metadata server once a LAYOUTCOMMIT has completed (see <xref target="general_layoutcommit"/>).format="default"/>). <xref target="component_file_size"/>format="default"/> describes the mechanism by which the client is to handle data-server files that do not reflect the metadata server's size. </t> </section> <sectiontitle="COMMITanchor="commit_thru_mds" numbered="true" toc="default"> <name>COMMIT through MetadataServer" anchor="commit_thru_mds">Server</name> <t> The file layout provides two alternate means of providing for the commit of data written through data servers. The flag NFL4_UFLG_COMMIT_THRU_MDS in the field nfl_util of the file layout (data type nfsv4_1_file_layout4) is an indication from the metadata server to the client of theREQUIRED<bcp14>REQUIRED</bcp14> way of performing COMMIT, either by sending the COMMIT to the data server or the metadata server. These two methods of dealing with the issue correspond to broad styles of implementation for a pNFS server supporting the file layout type.<list style="symbols"> <t></t> <ul spacing="normal"> <li> When the flag is FALSE, COMMIT operationsMUST<bcp14>MUST</bcp14> to be sent to the data server to which the corresponding WRITE operations were sent. This approach is sometimes useful when file striping is implemented within the pNFS server (instead of the file system), with the individual data servers each implementing their own file systems.</t></li> <li> <t> When the flag is TRUE, COMMIT operationsMUST<bcp14>MUST</bcp14> be sent to the metadata server, rather than to the individual data servers. This approach is sometimes useful when file striping is implemented within the clustered file system that is the backend to the pNFS server. In such an implementation, each COMMIT to each data server might result in repeated writes of metadata blocks to the detriment of write performance. Sending a single COMMIT to the metadata server can be more efficient when there exists a clustered file system capable of implementing such a coordinated COMMIT.<vspace blankLines='1' /></t> <t> If nfl_util & NFL4_UFLG_COMMIT_THRU_MDS is TRUE, then in order to maintain the current NFSv4.1 commit and recovery model, the data serversMUST<bcp14>MUST</bcp14> return a common writeverf verifier in all WRITE responses for a given file layout, and the metadata server's COMMIT implementation must return the same writeverf. The value of the writeverf verifierMUST<bcp14>MUST</bcp14> be changed at the metadata server or any data server that is referenced in the layout, whenever there is a server event that can possibly lead to loss of uncommitted data. The scope of the verifier can be for a file or for the entire pNFS server. It might be more difficult for the server to maintain the verifier at the file level, but the benefit is that only events that impact a given file will require recovery action. </t></list> </t></li> </ul> <t> Note that if the layout specified dense packing, then the offset used to a COMMIT to the MDS may differ than that of an offset used to a COMMIT to the data server. </t> <t> The single COMMIT to the metadata server will return a verifier, and the client should compare it to all the verifiers from the WRITEs and fail the COMMIT if there are any mismatched verifiers. If COMMIT to the metadata server fails, the client should re-send WRITEs for all the modified data in the file. The client should treat modified data with a mismatched verifier as a WRITE failure and try to recover by resending the WRITEs to the original data server or using another path to that data if the layout has not been recalled. Alternatively, the client can obtain a new layout or it could rewrite the data directly to the metadata server. If nfl_util & NFL4_UFLG_COMMIT_THRU_MDS is FALSE, sending a COMMIT to the metadata server might have no effect. If nfl_util & NFL4_UFLG_COMMIT_THRU_MDS is FALSE, a COMMIT sent to the metadata server should be used only to commit data that was written to the metadata server. See <xref target="storage_device_recovery"/>format="default"/> for recovery options. </t> </section> <sectiontitle="Thenumbered="true" toc="default"> <name>The LayoutIomode">Iomode</name> <t> The layout iomode need not be used by the metadata server when servicing NFSv4.1 file-based layouts, although in some circumstances it may be useful. For example, if the server implementation supports reading from read-only replicas or mirrors, it would be useful for the server to return a layout enabling the client to do so. As such, the clientSHOULD<bcp14>SHOULD</bcp14> set the iomode based on its intent to read or write the data. The client may default to an iomode of LAYOUTIOMODE4_RW. The iomode need not be checked by the data servers when clients perform I/O. However, the data serversSHOULD<bcp14>SHOULD</bcp14> still validate that the client holds a valid layout and return an error if the client does not. </t> </section> <sectiontitle="Metadatanumbered="true" toc="default"> <name>Metadata and Data Server StateCoordination">Coordination</name> <sectiontitle="Globalanchor="global_stateid" numbered="true" toc="default"> <name>Global StateidRequirements" anchor="global_stateid">Requirements</name> <t> When the client sends I/O to a data server, the stateid usedMUST NOT<bcp14>MUST NOT</bcp14> be a layout stateid as returned by LAYOUTGET or sent by CB_LAYOUTRECALL. Permitted stateids are based on one of the following: an OPEN stateid (the stateid field of data type OPEN4resok as returned by OPEN), a delegation stateid (the stateid field of data types open_read_delegation4 and open_write_delegation4 as returned by OPEN or WANT_DELEGATION, or as sent by CB_PUSH_DELEG), or a stateid returned by the LOCK or LOCKU operations. The stateid sent to the data serverMUST<bcp14>MUST</bcp14> be sent with the seqid set to zero, indicating the most current version of that stateid, rather than indicating a specific non-zero seqid value. In no case is the use of special stateid values allowed. </t> <t> The stateid used for I/OMUST<bcp14>MUST</bcp14> have the same effect and be subject to the same validation on a data server as it would if the I/O was being performed on the metadata server itself in the absence of pNFS. This has the implication that stateids are globally valid on both the metadata and data servers. This requires the metadata server to propagate changes in LOCK and OPEN state to the data servers, so that the data servers can validate I/O accesses. This is discussed further in <xref target="state_propagation"/>.format="default"/>. Depending on when stateids are propagated, the existence of a valid stateid on the data server may act as proof of a valid layout. </t> <t> Clients performing I/O operations need to select an appropriate stateid based on the locks (including opens and delegations) held by the client and the various types of state-owners sending the I/O requests. The rules for doing so when referencing data servers are somewhat different from those discussed in <xref target="stateid_use"/>,format="default"/>, which apply when accessing metadata servers. </t> <t> The following rules, applied in order of decreasing priority, govern the selection of the appropriate stateid:<list style='symbols'> <t></t> <ul spacing="normal"> <li> If the client holds a delegation for the file in question, the delegation stateid should be used.</t> <t></li> <li> Otherwise, there must be an OPEN stateid for the current open-owner, and that OPEN stateid for the open file in question is used, unless mandatory locking prevents that. See below.</t> <t></li> <li> If the data server had previously responded with NFS4ERR_LOCKED to use of the OPEN stateid, then the client should use the byte-range lock stateid whenever one exists for that open file with the current lock-owner.</t> <t></li> <li> Special stateids should never be used. If they are used, the data serverMUST<bcp14>MUST</bcp14> reject the I/O with an NFS4ERR_BAD_STATEID error.</t> </list> </t></li> </ul> </section> <sectiontitle="Dataanchor="state_propagation" numbered="true" toc="default"> <name>Data Server StatePropagation" anchor="state_propagation" >Propagation</name> <t> Since the metadata server, which handles byte-range lock and open-mode state changes as well as ACLs, might not be co-located with the data servers where I/O accesses are validated, the server implementationMUST<bcp14>MUST</bcp14> take care of propagating changes of this state to the data servers. Once the propagation to the data servers is complete, the full effect of those changesMUST<bcp14>MUST</bcp14> be in effect at the data servers. However, some state changes need not be propagated immediately, although all changesSHOULD<bcp14>SHOULD</bcp14> be propagated promptly. These state propagations have an impact on the design of the control protocol, even though the control protocol is outside of the scope of this specification. Immediate propagation refers to the synchronous propagation of state from the metadata server to the data server(s); the propagation must be complete before returning to the client. </t> <sectiontitle="Locknumbered="true" toc="default"> <name>Lock StatePropagation">Propagation</name> <t> If the pNFS server supports mandatory byte-range locking, any mandatory byte-range locks on a fileMUST<bcp14>MUST</bcp14> be made effective at the data servers before the request that establishes them returns to the caller. The effectMUST<bcp14>MUST</bcp14> be the same as if the mandatory byte-range lock state were synchronously propagated to the data servers, even though the details of the control protocol may avoid actual transfer of the state under certain circumstances. </t> <t> On the other hand, since advisory byte-range lock state is not used for checking I/O accesses at the data servers, there is no semantic reason for propagating advisory byte-range lock state to the data servers. Since updates to advisory locks neither confer nor remove privileges, these changes need not be propagated immediately, and may not need to be propagated promptly. The updates to advisory locks need only be propagated when the data server needs to resolve a question about a stateid. In fact, if byte-range locking is not mandatory (i.e., is advisory) the clients are advised to avoid using the byte-range lock-based stateids for I/O. The stateids returned by OPEN are sufficient and eliminate overhead for this kind of state propagation. </t> <t> If a client gets back an NFS4ERR_LOCKED error from a data server, this is an indication that mandatory byte-range locking is in force. The client recovers from this by getting a byte-range lock that covers the affected range and re-sends the I/O with the stateid of the byte-range lock. </t> </section> <sectiontitle="Opennumbered="true" toc="default"> <name>Open and Deny ModeValidation">Validation</name> <t> Open and deny mode validationMUST<bcp14>MUST</bcp14> be performed against the open and deny mode(s) held by the data servers. When access is reduced or a deny mode made more restrictive (because of CLOSE or OPEN_DOWNGRADE), the data serverMUST<bcp14>MUST</bcp14> prevent any I/Os that would be denied if performed on the metadata server. When access is expanded, the data serverMUST<bcp14>MUST</bcp14> make sure that no requests are subsequently rejected because of open or deny issues that no longer apply, given the previous relaxation. </t> </section> <sectiontitle="File Attributes">numbered="true" toc="default"> <name>File Attributes</name> <t> Since the SETATTR operation has the ability to modify state that is visible on both the metadata and data servers (e.g., the size), care must be taken to ensure that the resultant state across the set of data servers is consistent, especially when truncating or growing the file. </t> <t> As described earlier, the LAYOUTCOMMIT operation is used to ensure that the metadata is synchronized with changes made to the data servers. For the NFSv4.1-based data storage protocol, it is necessary to re-synchronize state such as the size attribute, and the setting of mtime/change/atime. See <xref target="committing_layout"/>format="default"/> for a full description of the semantics regarding LAYOUTCOMMIT and attribute synchronization. It should be noted that by using an NFSv4.1-based layout type, it is possible to synchronize this state before LAYOUTCOMMIT occurs. For example, the control protocol can be used to query the attributes present on the data servers. </t> <t> Any changes to file attributes that control authorization or access as reflected by ACCESS calls or READs and WRITEs on the metadata server,MUST<bcp14>MUST</bcp14> be propagated to the data servers for enforcement on READ and WRITE I/O calls. If the changes made on the metadata server result in more restrictive access permissions for any user, those changesMUST<bcp14>MUST</bcp14> be propagated to the data servers synchronously. </t> <t> The OPEN operation (<xref target="OP_OPEN_IMPLEMENTATION"/>)format="default"/>) does not impose any requirement that I/O operations on an open file have the same credentials as the OPEN itself (unless EXCHGID4_FLAG_BIND_PRINC_STATEID is set when EXCHANGE_ID creates the client ID), and so it requires the server's READ and WRITE operations to perform appropriate access checking. Changes to ACLs also require new access checking by READ and WRITE on the server. The propagation of access-right changes due to changes in ACLs may be asynchronous only if the server implementation is able to determine that the updated ACL is not more restrictive for any user specified in the old ACL. Due to the relative infrequency of ACL updates, it is suggested that all changes be propagated synchronously. </t> </section> </section> </section> <sectiontitle="Dataanchor="component_file_size" numbered="true" toc="default"> <name>Data Server Component FileSize" anchor="component_file_size">Size</name> <t> A potential problem exists when a component data file on a particular data server has grown past EOF; the problem exists for both dense and sparse layouts. Imagine the following scenario: a client creates a new file (size == 0) and writes to byte 131072; the client then seeks to the beginning of the file and reads byte 100. The client should receive zeroes back as a result of the READ. However, if the striping pattern directs the client to send the READ to a data server other than the one that received the client's original WRITE, the data server servicing the READ may believe that the file's size is still 0 bytes. In that event, the data server's READ response will contain zero bytes and an indication of EOF. The data server can only return zeroes if it knows that the file's size has been extended. This would require the immediate propagation of the file's size to all data servers, which is potentially very costly. Therefore, the client that has initiated the extension of the file's sizeMUST<bcp14>MUST</bcp14> be prepared to deal with these EOF conditions. When the offset in the arguments to READ is less than the client's view of the file size, if the READ response indicates EOF and/or contains fewer bytes than requested, the client will interpret such a response as a hole in the file, and the NFS client will substitute zeroes for the data. </t> <t> The NFSv4.1 protocol only provides close-to-open file data cache semantics; meaning that when the file is closed, all modified data is written to the server. When a subsequent OPEN of the file is done, the change attribute is inspected for a difference from a cached value for the change attribute. For the case above, this means that a LAYOUTCOMMIT will be done at close (along with the data WRITEs) and will update the file's size and change attribute. Access from another client after that point will result in the appropriate size being returned. </t> </section> <sectiontitle="Layoutanchor="file_layout_revoke" numbered="true" toc="default"> <name>Layout Revocation andFencing" anchor="file_layout_revoke" >Fencing</name> <t> As described in <xref target="crash_recovery"/>,format="default"/>, the layout-type-specific storage protocol is responsible for handling the effects of I/Os that started before lease expiration and extend through lease expiration. The LAYOUT4_NFSV4_1_FILES layout type can prevent all I/Os to data servers from being executed after lease expiration (this prevention is called "fencing"), without relying on a precise client lease timer and without requiring data servers to maintain lease timers. The LAYOUT4_NFSV4_1_FILES pNFS server has the flexibility to revoke individual layouts, and thus fence I/O on a per-file basis. </t> <t> In addition to lease expiration, the reasons a layout can be revoked include: client fails to respond to a CB_LAYOUTRECALL, the metadata server restarts, or administrative intervention. Regardless of the reason, once a client's layout has been revoked, the pNFS serverMUST<bcp14>MUST</bcp14> prevent the client from sending I/O for the affected file from and to all data servers; in other words, itMUST<bcp14>MUST</bcp14> fence the client from the affected file on the data servers. </t> <t> Fencing works as follows. As described in <xref target="pnfs_session_stuff"/>,format="default"/>, in COMPOUND procedure requests to the data server, the data filehandle provided by the PUTFH operation and the stateid in the READ or WRITE operation are used to ensure that the client has a valid layout for the I/O being performed; if it does not, the I/O is rejected with NFS4ERR_PNFS_NO_LAYOUT. The server can simply check the stateid and, additionally, make the data filehandle stale if the layout specified a data filehandle that is different from the metadata server's filehandle for the file (see the nfl_fh_list description in <xref target="file_data_types"/>).format="default"/>). </t> <t> Before the metadata server takes any action to revoke layout state given out by a previous instance, it must make sure that all layout state from that previous instance are invalidated at the data servers. This has the following implications.<list style='symbols'> <t></t> <ul spacing="normal"> <li> The metadata server must not restripe a file until it has contacted all of the data servers to invalidate the layouts from the previous instance.</t> <t></li> <li> The metadata server must not give out mandatory locks that conflict with layouts from the previous instance without either doing a specific layout invalidation (as it would have to do anyway) or doing a global data server invalidation.</t> </list> </t></li> </ul> </section> <sectiontitle="Securityanchor="file_security_considerations" numbered="true" toc="default"> <name>Security Considerations for the File LayoutType" anchor="file_security_considerations">Type</name> <t> The NFSv4.1 file layout typeMUST<bcp14>MUST</bcp14> adhere to the security considerations outlined in <xref target="security_considerations_pnfs"/>.format="default"/>. NFSv4.1 data serversMUST<bcp14>MUST</bcp14> make all of the required access checks on each READ or WRITE I/O as determined by the NFSv4.1 protocol. If the metadata server would deny a READ or WRITE operation on a file due to its ACL, mode attribute, open access mode, open deny mode, mandatory byte-range lock state, or any other attributes and state, the data serverMUST<bcp14>MUST</bcp14> also deny the READ or WRITE operation. This impacts the control protocol and the propagation of state from the metadata server to the data servers; see <xref target="state_propagation"/>format="default"/> for more details. </t> <t> The methods for authentication, integrity, and privacy for data servers based on the LAYOUT4_NFSV4_1_FILES layout type are the same as those used by metadata servers. Metadata and data servers use ONC RPC security flavors to authenticate, and SECINFO and SECINFO_NO_NAME to negotiate the security mechanism and services to be used. Thus, when using the LAYOUT4_NFSV4_1_FILES layout type, the impact on the RPC-based security model due to pNFS (as alluded to in Sections <xref target="rpc_and_security" format="counter"/> and <xref target="parallel_access" format="counter"/>) is zero. </t> <t> For a given file object, a metadata serverMAY<bcp14>MAY</bcp14> require different security parameters (secinfo4 value) than the data server. For a given file object with multiple data servers, the secinfo4 valueSHOULD<bcp14>SHOULD</bcp14> be the same across all data servers. If the secinfo4 values across a metadata server and its data servers differ for a specific file, the mapping of the principal to the server's internal user identifierMUST<bcp14>MUST</bcp14> be the same in order for the access-control checks based on ACL, mode, open and deny mode, and mandatory locking to be consistent across on the pNFS server. </t> <t> If an NFSv4.1 implementation supports pNFS and supports NFSv4.1 file layouts, then the implementationMUST<bcp14>MUST</bcp14> support the SECINFO_NO_NAME operation on both the metadata and data servers. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="internationalization"title="Internationalization">numbered="true" toc="default"> <name>Internationalization</name> <t> The primary issue in which NFSv4.1 needs to deal with internationalization, or I18N, is with respect to file names and other strings as used within the protocol. The choice of string representation must allow reasonable name/string access to clients that use various languages. The UTF-8 encoding of the UCS (Universal Multiple-Octet Coded Character Set) as defined by <xreftarget="ISO.10646-1.1993">ISO10646</xref>target="ISO.10646-1.1993" format="default">ISO10646</xref> allows for this type of access and follows the policy described in "IETF Policy on Character Sets and Languages", <xreftarget="RFC2277">RFCtarget="RFC2277" format="default">RFC 2277</xref>. </t> <t> <xreftarget="RFC3454">RFCtarget="RFC3454" format="default">RFC 3454</xref>, otherwise known as "stringprep", documents a framework for using Unicode/UTF-8 in networking protocols so as "to increase the likelihood that string input and string comparison work in ways that make sense for typical users throughout the world". A protocol must define a profile of stringprep "in order to fully specify the processing options". The remainder of this section defines the NFSv4.1 stringprep profiles. Much of the terminology used for the remainder of this section comes from stringprep. </t> <t> There are three UTF-8 string types defined for NFSv4.1: utf8str_cs, utf8str_cis, and utf8str_mixed. Separate profiles are defined for each. Each profile defines the following, as required by stringprep:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The intended applicability of the profile.</t> <t></li> <li> The character repertoire that is the input and output to stringprep (which is Unicode 3.2 for the referenced version of stringprep). However, NFSv4.1 implementations are not limited to 3.2.</t> <t></li> <li> The mapping tables from stringprep used (as described in Section3<xref target="RFC3454" sectionFormat="bare" section="3"/> of stringprep).</t> <t></li> <li> Any additional mapping tables specific to the profile.</t> <t></li> <li> The Unicode normalization used, if any (as described in Section4<xref target="RFC3454" sectionFormat="bare" section="4"/> of stringprep).</t> <t></li> <li> The tables from the stringprep listing of characters that are prohibited as output (as described in Section5<xref target="RFC3454" sectionFormat="bare" section="5"/> of stringprep).</t> <t></li> <li> The bidirectional string testing used, if any (as described in Section6<xref target="RFC3454" sectionFormat="bare" section="6"/> of stringprep).</t> <t></li> <li> Any additional characters that are prohibited as output specific to the profile.</t> </list> </t></li> </ul> <t> Stringprep discusses Unicode characters, whereas NFSv4.1 renders UTF-8 characters. Since there is a one-to-one mapping from UTF-8 to Unicode, when the remainder of this document refers to Unicode, the reader should assume UTF-8. </t> <t> Much of the text for the profiles comes from RFC 3491 <xreftarget="RFC3491">RFC 3491</xref>.target="RFC3491" format="default"/>. </t> <sectiontitle="Stringprepnumbered="true" toc="default"> <name>Stringprep Profile for the utf8str_csType">Type</name> <t> Every use of the utf8str_cs type definition in the NFSv4 protocol specification follows the profile named nfs4_cs_prep. </t> <section toc="exclude"title="Intendednumbered="true"> <name>Intended Applicability of the nfs4_cs_prepProfile">Profile</name> <t> The utf8str_cs type is a case-sensitive string of UTF-8 characters. Its primary use in NFSv4.1 is for naming components and pathnames. Components and pathnames are stored on the server's file system. Two valid distinct UTF-8 strings might be the same after processing via the utf8str_cs profile. If the strings are two names inside a directory, the NFSv4.1 server will need to either:<list style='symbols'> <t></t> <ul spacing="normal"> <li> disallow the creation of a second name if its post-processed form collides with that of an existing name, or</t> <t></li> <li> allow the creation of the second name, but arrange so that after post-processing, the second name is different than the post-processed form of the first name.</t> </list> </t></li> </ul> </section> <section toc="exclude"title="Characternumbered="true"> <name>Character Repertoire ofnfs4_cs_prep">nfs4_cs_prep</name> <t> The nfs4_cs_prep profile uses Unicode 3.2, as defined in stringprep's Appendix A.1. However, NFSv4.1 implementations are not limited to 3.2. </t> </section> <section toc="exclude"title="Mappingnumbered="true"> <name>Mapping Used bynfs4_cs_prep">nfs4_cs_prep</name> <t> The nfs4_cs_prep profile specifies mapping using the following tables from stringprep:<list style='empty'> <t></t> <ul empty="true" spacing="normal"> <li> Table B.1</t> </list> </t></li> </ul> <t> Table B.2 is normally not part of the nfs4_cs_prep profile as it is primarily for dealing with case-insensitive comparisons. However, if the NFSv4.1 file server supports the case_insensitive file system attribute, and if case_insensitive is TRUE, the NFSv4.1 serverMUST<bcp14>MUST</bcp14> use Table B.2 (in addition to Table B1) when processing utf8str_cs strings, and the NFSv4.1 clientMUST<bcp14>MUST</bcp14> assume Table B.2 (in addition to Table B.1) is being used. </t> <t> If the case_preserving attribute is present and set to FALSE, then the NFSv4.1 serverMUST<bcp14>MUST</bcp14> use Table B.2 to map case when processing utf8str_cs strings. Whether the server maps from lower to upper case or from upper to lower case is an implementation dependency. </t> </section> <section toc="exclude"title="Normalizationnumbered="true"> <name>Normalization used bynfs4_cs_prep">nfs4_cs_prep</name> <t> The nfs4_cs_prep profile does not specify a normalization form. A later revision of this specification may specify a particular normalization form. Therefore, the server and client can expect that they may receive unnormalized characters within protocol requests and responses. If the operating environment requires normalization, then the implementation must normalize utf8str_cs strings within the protocol before presenting the information to an application (at the client) or local file system (at the server). </t> </section> <section toc="exclude"title="Prohibitednumbered="true"> <name>Prohibited Output fornfs4_cs_prep">nfs4_cs_prep</name> <t> The nfs4_cs_prep profile RECOMMENDS prohibiting the use of the following tables from stringprep:<list style='empty'> <t>Table C.5</t> <t>Table C.6</t> </list></t> <ul empty="true" spacing="normal"> <li>Table C.5</li> <li>Table C.6</li> </ul> </section> <section toc="exclude"title="Bidirectionalnumbered="true"> <name>Bidirectional Output fornfs4_cs_prep">nfs4_cs_prep</name> <t> The nfs4_cs_prep profile does not specify any checking of bidirectional strings. </t> </section> </section> <sectiontitle="Stringprepnumbered="true" toc="default"> <name>Stringprep Profile for the utf8str_cisType">Type</name> <t> Every use of the utf8str_cis type definition in the NFSv4.1 protocol specification follows the profile named nfs4_cis_prep. </t> <section toc="exclude"title="Intendednumbered="true"> <name>Intended Applicability of the nfs4_cis_prepProfile">Profile</name> <t> The utf8str_cis type is a case-insensitive string of UTF-8 characters. Its primary use in NFSv4.1 is for naming NFS servers. </t> </section> <section toc="exclude"title="Characternumbered="true"> <name>Character Repertoire ofnfs4_cis_prep">nfs4_cis_prep</name> <t> The nfs4_cis_prep profile uses Unicode 3.2, as defined in stringprep's Appendix A.1. However, NFSv4.1 implementations are not limited to 3.2. </t> </section> <section toc="exclude"title="Mappingnumbered="true"> <name>Mapping Used bynfs4_cis_prep">nfs4_cis_prep</name> <t> The nfs4_cis_prep profile specifies mapping using the following tables from stringprep:<list style='empty'> <t>Table B.1</t> <t>Table B.2</t> </list></t> <ul empty="true" spacing="normal"> <li>Table B.1</li> <li>Table B.2</li> </ul> </section> <section toc="exclude"title="Normalizationnumbered="true"> <name>Normalization Used bynfs4_cis_prep">nfs4_cis_prep</name> <t> The nfs4_cis_prep profile specifies using Unicode normalization form KC, as described in stringprep. </t> </section> <section toc="exclude"title="Prohibitednumbered="true"> <name>Prohibited Output fornfs4_cis_prep">nfs4_cis_prep</name> <t> The nfs4_cis_prep profile specifies prohibiting using the following tables from stringprep:<list style='empty'> <t>Table C.1.2</t> <t>Table C.2.2</t> <t>Table C.3</t> <t>Table C.4</t> <t>Table C.5</t> <t>Table C.6</t> <t>Table C.7</t> <t>Table C.8</t> <t>Table C.9</t> </list></t> <ul empty="true" spacing="normal"> <li>Table C.1.2</li> <li>Table C.2.2</li> <li>Table C.3</li> <li>Table C.4</li> <li>Table C.5</li> <li>Table C.6</li> <li>Table C.7</li> <li>Table C.8</li> <li>Table C.9</li> </ul> </section> <section toc="exclude"title="Bidirectionalnumbered="true"> <name>Bidirectional Output fornfs4_cis_prep">nfs4_cis_prep</name> <t> The nfs4_cis_prep profile specifies checking bidirectional strings as described in stringprep's Section6.<xref target="RFC3454" sectionFormat="bare" section="6"/>. </t> </section> </section> <sectiontitle="Stringprepnumbered="true" toc="default"> <name>Stringprep Profile for the utf8str_mixedType">Type</name> <t> Every use of the utf8str_mixed type definition in the NFSv4.1 protocol specification follows the profile named nfs4_mixed_prep. </t> <section toc="exclude"title="Intendednumbered="true"> <name>Intended Applicability of the nfs4_mixed_prepProfile">Profile</name> <t> The utf8str_mixed type is a string of UTF-8 characters, with a prefix that is case sensitive, a separator equal to '@', and a suffix that is a fully qualified domain name. Its primary use in NFSv4.1 is for naming principals identified in an Access Control Entry. </t> </section> <section toc="exclude"title="Characternumbered="true"> <name>Character Repertoire ofnfs4_mixed_prep">nfs4_mixed_prep</name> <t> The nfs4_mixed_prep profile uses Unicode 3.2, as defined in stringprep's Appendix A.1. However, NFSv4.1 implementations are not limited to 3.2. </t> </section> <section toc="exclude"title="Mappingnumbered="true"> <name>Mapping Used bynfs4_cis_prep">nfs4_cis_prep</name> <t> For the prefix and the separator of a utf8str_mixed string, the nfs4_mixed_prep profile specifies mapping using the following table from stringprep:<list style='empty'> <t>Table B.1</t> </list></t> <ul empty="true" spacing="normal"> <li>Table B.1</li> </ul> <t> For the suffix of a utf8str_mixed string, the nfs4_mixed_prep profile specifies mapping using the following tables from stringprep:<list style='empty'> <t>Table B.1</t> <t>Table B.2</t> </list></t> <ul empty="true" spacing="normal"> <li>Table B.1</li> <li>Table B.2</li> </ul> </section> <section toc="exclude"title="Normalizationnumbered="true"> <name>Normalization Used bynfs4_mixed_prep">nfs4_mixed_prep</name> <t> The nfs4_mixed_prep profile specifies using Unicode normalization form KC, as described in stringprep. </t> </section> <section toc="exclude"title="Prohibitednumbered="true"> <name>Prohibited Output fornfs4_mixed_prep">nfs4_mixed_prep</name> <t> The nfs4_mixed_prep profile specifies prohibiting using the following tables from stringprep:<list style='empty'> <t>Table C.1.2</t> <t>Table C.2.2</t> <t>Table C.3</t> <t>Table C.4</t> <t>Table C.5</t> <t>Table C.6</t> <t>Table C.7</t> <t>Table C.8</t> <t>Table C.9</t> </list></t> <ul empty="true" spacing="normal"> <li>Table C.1.2</li> <li>Table C.2.2</li> <li>Table C.3</li> <li>Table C.4</li> <li>Table C.5</li> <li>Table C.6</li> <li>Table C.7</li> <li>Table C.8</li> <li>Table C.9</li> </ul> </section> <section toc="exclude"title="Bidirectionalnumbered="true"> <name>Bidirectional Output fornfs4_mixed_prep">nfs4_mixed_prep</name> <t> The nfs4_mixed_prep profile specifies checking bidirectional strings as described in stringprep's Section6.<xref target="RFC3454" sectionFormat="bare" section="6"/>. </t> </section> </section> <sectiontitle="UTF-8 Capabilities" anchor="utf8_caps"> <figure> <artwork>anchor="utf8_caps" numbered="true" toc="default"> <name>UTF-8 Capabilities</name> <sourcecode type="xdr"><![CDATA[ const FSCHARSET_CAP4_CONTAINS_NON_UTF8 = 0x1; const FSCHARSET_CAP4_ALLOWS_ONLY_UTF8 = 0x2; typedef uint32_tfs_charset_cap4; </artwork> </figure>fs_charset_cap4;]]></sourcecode> <t> Because some operating environments and file systems do not enforce character set encodings, NFSv4.1 supports the fs_charset_cap attribute (<xreftarget="attrdef_fs_charset_cap"/>)target="attrdef_fs_charset_cap" format="default"/>) that indicates to the client a file system's UTF-8 capabilities. The attribute is an integer containing a pair of flags. The first flag is FSCHARSET_CAP4_CONTAINS_NON_UTF8, which, if set to one, tells the client that the file system contains non-UTF-8 characters, and the server will not convert non-UTF characters to UTF-8 if the client reads a symbolic link or directory, neither will operations with component names or pathnames in the arguments convert the strings to UTF-8. The second flag is FSCHARSET_CAP4_ALLOWS_ONLY_UTF8, which, if set to one, indicates that the server will accept (and generate) only UTF-8 characters on the file system. If FSCHARSET_CAP4_ALLOWS_ONLY_UTF8 is set to one, FSCHARSET_CAP4_CONTAINS_NON_UTF8MUST<bcp14>MUST</bcp14> be set to zero. FSCHARSET_CAP4_ALLOWS_ONLY_UTF8SHOULD<bcp14>SHOULD</bcp14> always be set to one. </t> </section> <sectiontitle="UTF-8anchor="utf8_related_errors" numbered="true" toc="default"> <name>UTF-8 RelatedErrors" anchor="utf8_related_errors">Errors</name> <t> Where the client sends an invalid UTF-8 string, the server should return NFS4ERR_INVAL (see <xreftarget="error_definitions"/>).target="error_definitions" format="default"/>). This includes cases in which inappropriate prefixes are detected and where the count includes trailing bytes that do not constitute a full UCS character. </t> <t> Where the client-supplied string is valid UTF-8 but contains characters that are not supported by the server as a value for that string (e.g., names containing characters outside of Unicode plane 0 on file systems that fail to support such characters despite their presence in the Unicode standard), the server should return NFS4ERR_BADCHAR. </t> <t> Where a UTF-8 string is used as a file name, and the file system (while supporting all of the characters within the name) does not allow that particular name to be used, the server should return the error <xreftarget="error_definitions">NFS4ERR_BADNAME</xref>.target="error_definitions" format="default">NFS4ERR_BADNAME</xref>. This includes situations in which the server file system imposes a normalization constraint on name strings, but will also include such situations as file system prohibitions of "." and ".." as file names for certain operations, and other such constraints. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Error Values">numbered="true" toc="default"> <name>Error Values</name> <t> NFS error numbers are assigned to failed operations within a Compound (COMPOUND or CB_COMPOUND) request. A Compound request contains a number of NFS operations that have their results encoded in sequence in a Compound reply. The results of successful operations will consist of an NFS4_OK status followed by the encoded results of the operation. If an NFS operation fails, an error status will be entered in the reply and the Compound request will be terminated. </t> <sectiontitle="Error Definitions"> <texttable anchor='error_definitions'> <preamble>numbered="true" toc="default"> <name>Error Definitions</name> <table anchor="error_definitions" align="center"> <name> Protocol ErrorDefinitions </preamble> <ttcol align='left'>Error</ttcol> <ttcol align='left'>Number</ttcol> <ttcol align='left'>Description</ttcol> <c>NFS4_OK</c> <c>0</c> <c><xrefDefinitions</name> <thead> <tr> <th align="left">Error</th> <th align="left">Number</th> <th align="left">Description</th> </tr> </thead> <tbody> <tr> <td align="left">NFS4_OK</td> <td align="left">0</td> <td align="left"> <xref target="err_OK"/></c> <c>NFS4ERR_ACCESS</c> <c>13</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_ACCESS</td> <td align="left">13</td> <td align="left"> <xref target="err_ACCESS"/></c> <c>NFS4ERR_ATTRNOTSUPP</c> <c>10032</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_ATTRNOTSUPP</td> <td align="left">10032</td> <td align="left"> <xref target="err_ATTRNOTSUPP"/></c> <c>NFS4ERR_ADMIN_REVOKED</c> <c>10047</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_ADMIN_REVOKED</td> <td align="left">10047</td> <td align="left"> <xref target="err_ADMIN_REVOKED"/></c> <c>NFS4ERR_BACK_CHAN_BUSY</c> <c>10057</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BACK_CHAN_BUSY</td> <td align="left">10057</td> <td align="left"> <xref target="err_BACK_CHAN_BUSY"/></c> <c>NFS4ERR_BADCHAR</c> <c>10040</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADCHAR</td> <td align="left">10040</td> <td align="left"> <xref target="err_BADCHAR"/></c> <c>NFS4ERR_BADHANDLE</c> <c>10001</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADHANDLE</td> <td align="left">10001</td> <td align="left"> <xref target="err_BADHANDLE"/></c> <c>NFS4ERR_BADIOMODE</c> <c>10049</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADIOMODE</td> <td align="left">10049</td> <td align="left"> <xref target="err_BADIOMODE"/></c> <c>NFS4ERR_BADLAYOUT</c> <c>10050</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADLAYOUT</td> <td align="left">10050</td> <td align="left"> <xref target="err_BADLAYOUT"/></c> <c>NFS4ERR_BADNAME</c> <c>10041</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADNAME</td> <td align="left">10041</td> <td align="left"> <xref target="err_BADNAME"/></c> <c>NFS4ERR_BADOWNER</c> <c>10039</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADOWNER</td> <td align="left">10039</td> <td align="left"> <xref target="err_BADOWNER"/></c> <c>NFS4ERR_BADSESSION</c> <c>10052</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADSESSION</td> <td align="left">10052</td> <td align="left"> <xref target="err_BADSESSION"/></c> <c>NFS4ERR_BADSLOT</c> <c>10053</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADSLOT</td> <td align="left">10053</td> <td align="left"> <xref target="err_BADSLOT"/></c> <c>NFS4ERR_BADTYPE</c> <c>10007</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADTYPE</td> <td align="left">10007</td> <td align="left"> <xref target="err_BADTYPE"/></c> <c>NFS4ERR_BADXDR</c> <c>10036</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BADXDR</td> <td align="left">10036</td> <td align="left"> <xref target="err_BADXDR"/></c> <c>NFS4ERR_BAD_COOKIE</c> <c>10003</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BAD_COOKIE</td> <td align="left">10003</td> <td align="left"> <xref target="err_BAD_COOKIE"/></c> <c>NFS4ERR_BAD_HIGH_SLOT</c> <c>10077</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BAD_HIGH_SLOT</td> <td align="left">10077</td> <td align="left"> <xref target="err_BAD_HIGH_SLOT"/></c> <c>NFS4ERR_BAD_RANGE</c> <c>10042</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BAD_RANGE</td> <td align="left">10042</td> <td align="left"> <xref target="err_BAD_RANGE"/></c> <c>NFS4ERR_BAD_SEQID</c> <c>10026</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BAD_SEQID</td> <td align="left">10026</td> <td align="left"> <xref target="err_BAD_SEQID"/></c> <c>NFS4ERR_BAD_SESSION_DIGEST</c> <c>10051</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BAD_SESSION_DIGEST</td> <td align="left">10051</td> <td align="left"> <xref target="err_BAD_SESSION_DIGEST"/></c> <c>NFS4ERR_BAD_STATEID</c> <c>10025</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_BAD_STATEID</td> <td align="left">10025</td> <td align="left"> <xref target="err_BAD_STATEID"/></c> <c>NFS4ERR_CB_PATH_DOWN</c> <c>10048</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_CB_PATH_DOWN</td> <td align="left">10048</td> <td align="left"> <xref target="err_CB_PATH_DOWN"/></c> <c>NFS4ERR_CLID_INUSE</c> <c>10017</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_CLID_INUSE</td> <td align="left">10017</td> <td align="left"> <xref target="err_CLID_INUSE"/></c> <c>NFS4ERR_CLIENTID_BUSY</c> <c>10074</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_CLIENTID_BUSY</td> <td align="left">10074</td> <td align="left"> <xref target="err_CLIENTID_BUSY"/></c> <c>NFS4ERR_COMPLETE_ALREADY</c> <c>10054</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_COMPLETE_ALREADY</td> <td align="left">10054</td> <td align="left"> <xref target="err_COMPLETE_ALREADY"/></c> <c>NFS4ERR_CONN_NOT_BOUND_TO_SESSION</c> <c>10055</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_CONN_NOT_BOUND_TO_SESSION</td> <td align="left">10055</td> <td align="left"> <xref target="err_CONN_NOT_BOUND_TO_SESSION"/></c> <c>NFS4ERR_DEADLOCK</c> <c>10045</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DEADLOCK</td> <td align="left">10045</td> <td align="left"> <xref target="err_DEADLOCK"/></c> <c>NFS4ERR_DEADSESSION</c> <c>10078</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DEADSESSION</td> <td align="left">10078</td> <td align="left"> <xref target="err_DEADSESSION"/></c> <c>NFS4ERR_DELAY</c> <c>10008</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DELAY</td> <td align="left">10008</td> <td align="left"> <xref target="err_DELAY"/></c> <c>NFS4ERR_DELEG_ALREADY_WANTED</c> <c>10056</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DELEG_ALREADY_WANTED</td> <td align="left">10056</td> <td align="left"> <xref target="err_DELEG_ALREADY_WANTED"/></c> <c>NFS4ERR_DELEG_REVOKED</c> <c>10087</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DELEG_REVOKED</td> <td align="left">10087</td> <td align="left"> <xref target="err_DELEG_REVOKED"/></c> <c>NFS4ERR_DENIED</c> <c>10010</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DENIED</td> <td align="left">10010</td> <td align="left"> <xref target="err_DENIED"/></c> <c>NFS4ERR_DIRDELEG_UNAVAIL</c> <c>10084</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DIRDELEG_UNAVAIL</td> <td align="left">10084</td> <td align="left"> <xref target="err_DIRDELEG_UNAVAIL"/></c> <c>NFS4ERR_DQUOT</c> <c>69</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_DQUOT</td> <td align="left">69</td> <td align="left"> <xref target="err_DQUOT"/></c> <c>NFS4ERR_ENCR_ALG_UNSUPP</c> <c>10079</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_ENCR_ALG_UNSUPP</td> <td align="left">10079</td> <td align="left"> <xref target="err_ENCR_ALG_UNSUPP"/></c> <c>NFS4ERR_EXIST</c> <c>17</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_EXIST</td> <td align="left">17</td> <td align="left"> <xref target="err_EXIST"/></c> <c>NFS4ERR_EXPIRED</c> <c>10011</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_EXPIRED</td> <td align="left">10011</td> <td align="left"> <xref target="err_EXPIRED"/></c> <c>NFS4ERR_FBIG</c> <c>27</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_FBIG</td> <td align="left">27</td> <td align="left"> <xref target="err_FBIG"/></c> <c>NFS4ERR_FHEXPIRED</c> <c>10014</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_FHEXPIRED</td> <td align="left">10014</td> <td align="left"> <xref target="err_FHEXPIRED"/></c> <c>NFS4ERR_FILE_OPEN</c> <c>10046</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_FILE_OPEN</td> <td align="left">10046</td> <td align="left"> <xref target="err_FILE_OPEN"/></c> <c>NFS4ERR_GRACE</c> <c>10013</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_GRACE</td> <td align="left">10013</td> <td align="left"> <xref target="err_GRACE"/></c> <c>NFS4ERR_HASH_ALG_UNSUPP</c> <c>10072</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_HASH_ALG_UNSUPP</td> <td align="left">10072</td> <td align="left"> <xref target="err_HASH_ALG_UNSUPP"/></c> <c>NFS4ERR_INVAL</c> <c>22</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_INVAL</td> <td align="left">22</td> <td align="left"> <xref target="err_INVAL"/></c> <c>NFS4ERR_IO</c> <c>5</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_IO</td> <td align="left">5</td> <td align="left"> <xref target="err_IO"/></c> <c>NFS4ERR_ISDIR</c> <c>21</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_ISDIR</td> <td align="left">21</td> <td align="left"> <xref target="err_ISDIR"/></c> <c>NFS4ERR_LAYOUTTRYLATER</c> <c>10058</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LAYOUTTRYLATER</td> <td align="left">10058</td> <td align="left"> <xref target="err_LAYOUTTRYLATER"/></c> <c>NFS4ERR_LAYOUTUNAVAILABLE</c> <c>10059</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LAYOUTUNAVAILABLE</td> <td align="left">10059</td> <td align="left"> <xref target="err_LAYOUTUNAVAILABLE"/></c> <c>NFS4ERR_LEASE_MOVED</c> <c>10031</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LEASE_MOVED</td> <td align="left">10031</td> <td align="left"> <xref target="err_LEASE_MOVED"/></c> <c>NFS4ERR_LOCKED</c> <c>10012</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LOCKED</td> <td align="left">10012</td> <td align="left"> <xref target="err_LOCKED"/></c> <c>NFS4ERR_LOCKS_HELD</c> <c>10037</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LOCKS_HELD</td> <td align="left">10037</td> <td align="left"> <xref target="err_LOCKS_HELD"/></c> <c>NFS4ERR_LOCK_NOTSUPP</c> <c>10043</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LOCK_NOTSUPP</td> <td align="left">10043</td> <td align="left"> <xref target="err_LOCK_NOTSUPP"/></c> <c>NFS4ERR_LOCK_RANGE</c> <c>10028</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_LOCK_RANGE</td> <td align="left">10028</td> <td align="left"> <xref target="err_LOCK_RANGE"/></c> <c>NFS4ERR_MINOR_VERS_MISMATCH</c> <c>10021</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_MINOR_VERS_MISMATCH</td> <td align="left">10021</td> <td align="left"> <xref target="err_MINOR_VERS_MISMATCH"/></c> <c>NFS4ERR_MLINK</c> <c>31</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_MLINK</td> <td align="left">31</td> <td align="left"> <xref target="err_MLINK"/></c> <c>NFS4ERR_MOVED</c> <c>10019</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_MOVED</td> <td align="left">10019</td> <td align="left"> <xref target="err_MOVED"/></c> <c>NFS4ERR_NAMETOOLONG</c> <c>63</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NAMETOOLONG</td> <td align="left">63</td> <td align="left"> <xref target="err_NAMETOOLONG"/></c> <c>NFS4ERR_NOENT</c> <c>2</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOENT</td> <td align="left">2</td> <td align="left"> <xref target="err_NOENT"/></c> <c>NFS4ERR_NOFILEHANDLE</c> <c>10020</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOFILEHANDLE</td> <td align="left">10020</td> <td align="left"> <xref target="err_NOFILEHANDLE"/></c> <c>NFS4ERR_NOMATCHING_LAYOUT</c> <c>10060</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOMATCHING_LAYOUT</td> <td align="left">10060</td> <td align="left"> <xref target="err_NOMATCHING_LAYOUT"/></c> <c>NFS4ERR_NOSPC</c> <c>28</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOSPC</td> <td align="left">28</td> <td align="left"> <xref target="err_NOSPC"/></c> <c>NFS4ERR_NOTDIR</c> <c>20</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOTDIR</td> <td align="left">20</td> <td align="left"> <xref target="err_NOTDIR"/></c> <c>NFS4ERR_NOTEMPTY</c> <c>66</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOTEMPTY</td> <td align="left">66</td> <td align="left"> <xref target="err_NOTEMPTY"/></c> <c>NFS4ERR_NOTSUPP</c> <c>10004</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOTSUPP</td> <td align="left">10004</td> <td align="left"> <xref target="err_NOTSUPP"/></c> <c>NFS4ERR_NOT_ONLY_OP</c> <c>10081</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOT_ONLY_OP</td> <td align="left">10081</td> <td align="left"> <xref target="err_NOT_ONLY_OP"/></c> <c>NFS4ERR_NOT_SAME</c> <c>10027</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NOT_SAME</td> <td align="left">10027</td> <td align="left"> <xref target="err_NOT_SAME"/></c> <c>NFS4ERR_NO_GRACE</c> <c>10033</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NO_GRACE</td> <td align="left">10033</td> <td align="left"> <xref target="err_NO_GRACE"/></c> <c>NFS4ERR_NXIO</c> <c>6</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_NXIO</td> <td align="left">6</td> <td align="left"> <xref target="err_NXIO"/></c> <c>NFS4ERR_OLD_STATEID</c> <c>10024</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_OLD_STATEID</td> <td align="left">10024</td> <td align="left"> <xref target="err_OLD_STATEID"/></c> <c>NFS4ERR_OPENMODE</c> <c>10038</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_OPENMODE</td> <td align="left">10038</td> <td align="left"> <xref target="err_OPENMODE"/></c> <c>NFS4ERR_OP_ILLEGAL</c> <c>10044</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_OP_ILLEGAL</td> <td align="left">10044</td> <td align="left"> <xref target="err_OP_ILLEGAL"/></c> <c>NFS4ERR_OP_NOT_IN_SESSION</c> <c>10071</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_OP_NOT_IN_SESSION</td> <td align="left">10071</td> <td align="left"> <xref target="err_OP_NOT_IN_SESSION"/></c> <c>NFS4ERR_PERM</c> <c>1</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_PERM</td> <td align="left">1</td> <td align="left"> <xref target="err_PERM"/></c> <c>NFS4ERR_PNFS_IO_HOLE</c> <c>10075</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_PNFS_IO_HOLE</td> <td align="left">10075</td> <td align="left"> <xref target="err_PNFS_IO_HOLE"/></c> <c>NFS4ERR_PNFS_NO_LAYOUT</c> <c>10080</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_PNFS_NO_LAYOUT</td> <td align="left">10080</td> <td align="left"> <xref target="err_PNFS_NO_LAYOUT"/></c> <c>NFS4ERR_RECALLCONFLICT</c> <c>10061</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_RECALLCONFLICT</td> <td align="left">10061</td> <td align="left"> <xref target="err_RECALLCONFLICT"/></c> <c>NFS4ERR_RECLAIM_BAD</c> <c>10034</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_RECLAIM_BAD</td> <td align="left">10034</td> <td align="left"> <xref target="err_RECLAIM_BAD"/></c> <c>NFS4ERR_RECLAIM_CONFLICT</c> <c>10035</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_RECLAIM_CONFLICT</td> <td align="left">10035</td> <td align="left"> <xref target="err_RECLAIM_CONFLICT"/></c> <c>NFS4ERR_REJECT_DELEG</c> <c>10085</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_REJECT_DELEG</td> <td align="left">10085</td> <td align="left"> <xref target="err_REJECT_DELEG"/></c> <c>NFS4ERR_REP_TOO_BIG</c> <c>10066</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG</td> <td align="left">10066</td> <td align="left"> <xref target="err_REP_TOO_BIG"/></c> <c>NFS4ERR_REP_TOO_BIG_TO_CACHE</c> <c>10067</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG_TO_CACHE</td> <td align="left">10067</td> <td align="left"> <xref target="err_REP_TOO_BIG_TO_CACHE"/></c> <c>NFS4ERR_REQ_TOO_BIG</c> <c>10065</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_REQ_TOO_BIG</td> <td align="left">10065</td> <td align="left"> <xref target="err_REQ_TOO_BIG"/></c> <c>NFS4ERR_RESTOREFH</c> <c>10030</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_RESTOREFH</td> <td align="left">10030</td> <td align="left"> <xref target="err_RESTOREFH"/></c> <c>NFS4ERR_RETRY_UNCACHED_REP</c> <c>10068</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_RETRY_UNCACHED_REP</td> <td align="left">10068</td> <td align="left"> <xref target="err_RETRY_UNCACHED_REP"/></c> <c>NFS4ERR_RETURNCONFLICT</c> <c>10086</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_RETURNCONFLICT</td> <td align="left">10086</td> <td align="left"> <xref target="err_RETURNCONFLICT"/></c> <c>NFS4ERR_ROFS</c> <c>30</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_ROFS</td> <td align="left">30</td> <td align="left"> <xref target="err_ROFS"/></c> <c>NFS4ERR_SAME</c> <c>10009</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SAME</td> <td align="left">10009</td> <td align="left"> <xref target="err_SAME"/></c> <c>NFS4ERR_SHARE_DENIED</c> <c>10015</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SHARE_DENIED</td> <td align="left">10015</td> <td align="left"> <xref target="err_SHARE_DENIED"/></c> <c>NFS4ERR_SEQUENCE_POS</c> <c>10064</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SEQUENCE_POS</td> <td align="left">10064</td> <td align="left"> <xref target="err_SEQUENCE_POS"/></c> <c>NFS4ERR_SEQ_FALSE_RETRY</c> <c>10076</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SEQ_FALSE_RETRY</td> <td align="left">10076</td> <td align="left"> <xref target="err_SEQ_FALSE_RETRY"/></c> <c>NFS4ERR_SEQ_MISORDERED</c> <c>10063</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SEQ_MISORDERED</td> <td align="left">10063</td> <td align="left"> <xref target="err_SEQ_MISORDERED"/></c> <c>NFS4ERR_SERVERFAULT</c> <c>10006</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SERVERFAULT</td> <td align="left">10006</td> <td align="left"> <xref target="err_SERVERFAULT"/></c> <c>NFS4ERR_STALE</c> <c>70</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_STALE</td> <td align="left">70</td> <td align="left"> <xref target="err_STALE"/></c> <c>NFS4ERR_STALE_CLIENTID</c> <c>10022</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_STALE_CLIENTID</td> <td align="left">10022</td> <td align="left"> <xref target="err_STALE_CLIENTID"/></c> <c>NFS4ERR_STALE_STATEID</c> <c>10023</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_STALE_STATEID</td> <td align="left">10023</td> <td align="left"> <xref target="err_STALE_STATEID"/></c> <c>NFS4ERR_SYMLINK</c> <c>10029</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_SYMLINK</td> <td align="left">10029</td> <td align="left"> <xref target="err_SYMLINK"/></c> <c>NFS4ERR_TOOSMALL</c> <c>10005</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_TOOSMALL</td> <td align="left">10005</td> <td align="left"> <xref target="err_TOOSMALL"/></c> <c>NFS4ERR_TOO_MANY_OPS</c> <c>10070</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_TOO_MANY_OPS</td> <td align="left">10070</td> <td align="left"> <xref target="err_TOO_MANY_OPS"/></c> <c>NFS4ERR_UNKNOWN_LAYOUTTYPE</c> <c>10062</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_UNKNOWN_LAYOUTTYPE</td> <td align="left">10062</td> <td align="left"> <xref target="err_UNKNOWN_LAYOUTTYPE"/></c> <c>NFS4ERR_UNSAFE_COMPOUND</c> <c>10069</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_UNSAFE_COMPOUND</td> <td align="left">10069</td> <td align="left"> <xref target="err_UNSAFE_COMPOUND"/></c> <c>NFS4ERR_WRONGSEC</c> <c>10016</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_WRONGSEC</td> <td align="left">10016</td> <td align="left"> <xref target="err_WRONGSEC"/></c> <c>NFS4ERR_WRONG_CRED</c> <c>10082</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_WRONG_CRED</td> <td align="left">10082</td> <td align="left"> <xref target="err_WRONG_CRED"/></c> <c>NFS4ERR_WRONG_TYPE</c> <c>10083</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_WRONG_TYPE</td> <td align="left">10083</td> <td align="left"> <xref target="err_WRONG_TYPE"/></c> <c>NFS4ERR_XDEV</c> <c>18</c> <c><xrefformat="default"/></td> </tr> <tr> <td align="left">NFS4ERR_XDEV</td> <td align="left">18</td> <td align="left"> <xref target="err_XDEV"/></c> </texttable> <section title="General Errors" anchor="errors_gen">format="default"/></td> </tr> </tbody> </table> <section anchor="errors_gen" numbered="true" toc="default"> <name>General Errors</name> <t> This section deals with errors that are applicable to a broad set of different purposes. </t> <sectiontitle="NFS4ERR_BADXDRanchor="err_BADXDR" numbered="true" toc="default"> <name>NFS4ERR_BADXDR (Error Code10036)" anchor="err_BADXDR">10036)</name> <t> The arguments for this operation do not match those specified in the XDR definition. This includes situations in which the request ends before all the arguments have been seen. Note that this error applies when fixed enumerations (these include booleans) have a value within the input stream that is not valid for the enum. A replier may pre-parse all operations for a Compound procedure before doing any operation execution and return RPC-level XDR errors in that case. </t> </section> <sectiontitle="NFS4ERR_BAD_COOKIEanchor="err_BAD_COOKIE" numbered="true" toc="default"> <name>NFS4ERR_BAD_COOKIE (Error Code10003)" anchor="err_BAD_COOKIE">10003)</name> <t> Used for operations that provide a set of information indexed by some quantity provided by the client or cookie sent by the server for an earlier invocation. Where the value cannot be used for its intended purpose, this error results. </t> </section> <sectiontitle="NFS4ERR_DELAYanchor="err_DELAY" numbered="true" toc="default"> <name>NFS4ERR_DELAY (Error Code10008)" anchor="err_DELAY">10008)</name> <t> For any of a number of reasons, the replier could not process this operation in what was deemed a reasonable time. The client should wait and then try the request with a new slot and sequence value. </t> <t> Some examples of scenarios that might lead to this situation:<list style="symbols"> <t></t> <ul spacing="normal"> <li> A server that supports hierarchical storage receives a request to process a file that had been migrated.</t> <t></li> <li> An operation requires a delegation recall to proceed,so thatbut the need to wait for this delegation to be recalled and returned makes processing this request in a timely fashion impossible.</t> <t></li> <li> A request is being performed on a session being migrated from another server as described in <xreftarget="SEC11-XS-session"/>,target="SEC11-XS-session" format="default"/>, and the lack of full information about the state of the session on the source makes it impossible to process the request immediately.</t> </list> </t></li> </ul> <t> In such cases, returning the error NFS4ERR_DELAY allows necessary preparatory operations to proceed without holding up requester resources such as a session slot. After delaying for period of time, the client can then re-send the operation in question, often as part of a nearly identical request. Because of the need to avoid spurious reissues of non-idempotent operations and to avoid acting in response to NFS4ERR_DELAY errors returned on responses returned from the replier'sreplayreply cache, integration with the session-providedreplayreply cache is necessary. There are a number of cases to deal with, each of which requires different sorts of handling by the requester and replier:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If NFS4ERR_DELAY is returned on a SEQUENCE operation, the request is retried in full with the SEQUENCE operation containing the same slot and sequence values. In this case, the replierMUST<bcp14>MUST</bcp14> avoid returning a response containing NFS4ERR_DELAY as the response to SEQUENCE solelyon the basisbecause an earlier instance ofits presencethe same request returned that error and it was stored in thereplayreply cache. If the replier did this, the retries would not be effective as there would be no opportunity for the replier to see whether the condition that generated the NFS4ERR_DELAY had been rectified during the interim between the original request and the retry.</t> <t></li> <li> If NFS4ERR_DELAY is returned on an operation other than SEQUENCEwhichthat validly appears as the first operation of a request, the handling is similar. The request can be retried in full without modification. In this case as well, the replierMUST<bcp14>MUST</bcp14> avoid returning a response containing NFS4ERR_DELAY as the response to an initial operation of a request solely on the basis of its presence in thereplayreply cache. If the replier did this, the retries would not be effective as there would be no opportunity for the replier to see whether the condition that generated the NFS4ERR_DELAY had been rectified during the interim between the original request and the retry.</t> <t></li> <li> If NFS4ERR_DELAY is returned on an operation other than the first in the request, the request when retriedMUST<bcp14>MUST</bcp14> contain a SEQUENCE operationwhichthat is different than the original one, with either thebin idslot ID or the sequence value different from that in the original request. Because requesters do this, there is no need for the replier to take special care to avoid returning an NFS4ERR_DELAYerror,error obtained from thereplayreply cache. When no non-idempotent operations have been processed before the NFS4ERR_DELAY was returned, the requester should retry the request in full, with the only difference from the original request being the modification to the slotidID or sequence value in the reissued SEQUENCE operation.</t></li> <li> <t> When NFS4ERR_DELAY is returned on an operation other than the first within a request and there has been a non-idempotent operation processed before the NFS4ERR_DELAY was returned, reissuing the request as is normally done would incorrectly cause the re-execution of the non-idempotent operation.<vspace blankLines="1"/></t> <t> To avoid this situation, the client should reissue the request without the non-idempotent operation. The request still must use a SEQUENCE operation with either a different slotidID or sequence value from the SEQUENCE in the original request. Because this is done, there is no way the replier could avoid spuriously re-executing the non-idempotent operation since the different SEQUENCE parameters prevent the requester from recognizing that the non-idempotent operation is being retried. </t></list> </t></li> </ul> <t> Note that without the ability to return NFS4ERR_DELAY and the requester's willingness to re-send when receiving it, deadlock might result. For example, if a recall is done, and if the delegation return or operations preparatory to delegation return are held up by other operations that need the delegation to be returned, session slots might not be available. The result could be deadlock. </t> </section> <sectiontitle="NFS4ERR_INVALanchor="err_INVAL" numbered="true" toc="default"> <name>NFS4ERR_INVAL (Error Code22)" anchor="err_INVAL">22)</name> <t> The arguments for this operation are not valid for some reason, even though they do match those specified in the XDR definition for the request. </t> </section> <sectiontitle="NFS4ERR_NOTSUPPanchor="err_NOTSUPP" numbered="true" toc="default"> <name>NFS4ERR_NOTSUPP (Error Code10004)" anchor="err_NOTSUPP">10004)</name> <t> Operation not supported, either because the operation is anOPTIONAL<bcp14>OPTIONAL</bcp14> one and is not supported by this server or because the operationMUST NOT<bcp14>MUST NOT</bcp14> be implemented in the current minor version. </t> </section> <sectiontitle="NFS4ERR_SERVERFAULTanchor="err_SERVERFAULT" numbered="true" toc="default"> <name>NFS4ERR_SERVERFAULT (Error Code10006)" anchor="err_SERVERFAULT">10006)</name> <t> An error occurred on the server that does not map to any of the specific legal NFSv4.1 protocol error values. The client should translate this into an appropriate error. UNIX clients may choose to translate this to EIO. </t> </section> <sectiontitle="NFS4ERR_TOOSMALLanchor="err_TOOSMALL" numbered="true" toc="default"> <name>NFS4ERR_TOOSMALL (Error Code10005)" anchor="err_TOOSMALL">10005)</name> <t> Used where an operation returns a variable amount of data, with a limit specified by the client. Where the data returned cannot be fit within the limit specified by the client, this error results. </t> </section> </section> <sectiontitle="Filehandle Errors" anchor="errors_fh">anchor="errors_fh" numbered="true" toc="default"> <name>Filehandle Errors</name> <t> These errors deal with the situation in which the current or saved filehandle, or the filehandle passed to PUTFH intended to become the current filehandle, is invalid in some way. This includes situations in which the filehandle is a valid filehandle in general but is not of the appropriate object type for the current operation. </t> <t> Where the error description indicates a problem with the current or saved filehandle, it is to be understood that filehandles are only checked for the condition if they are implicit arguments of the operation in question. </t> <sectiontitle="NFS4ERR_BADHANDLEanchor="err_BADHANDLE" numbered="true" toc="default"> <name>NFS4ERR_BADHANDLE (Error Code10001)" anchor="err_BADHANDLE">10001)</name> <t> Illegal NFS filehandle for the current server. The currentfile handlefilehandle failed internal consistency checks. Once accepted as valid (by PUTFH), no subsequent status change can cause the filehandle to generate this error. </t> </section> <sectiontitle="NFS4ERR_FHEXPIREDanchor="err_FHEXPIRED" numbered="true" toc="default"> <name>NFS4ERR_FHEXPIRED (Error Code10014)" anchor="err_FHEXPIRED">10014)</name> <t> A current or saved filehandle that is an argument to the current operation is volatile and has expired at the server. </t> </section> <sectiontitle="NFS4ERR_ISDIRanchor="err_ISDIR" numbered="true" toc="default"> <name>NFS4ERR_ISDIR (Error Code21)" anchor="err_ISDIR">21)</name> <t> The current or saved filehandle designates a directory when the current operation does not allow a directory to be accepted as the target of this operation. </t> </section> <sectiontitle="NFS4ERR_MOVEDanchor="err_MOVED" numbered="true" toc="default"> <name>NFS4ERR_MOVED (Error Code10019)" anchor="err_MOVED">10019)</name> <t> The file system that contains the current filehandle object is not present at theserver,server or is not accessibleusingwith the network address used. It may have been made accessible on a different set of network addresses, relocated or migrated to another server, or it may have never been present. The client may obtain the new file system location by obtaining the"fs_locations"fs_locations or"fs_locations_info"fs_locations_info attribute for the current filehandle. For further discussion, refer to <xref target="presence_or_absence"/>.format="default"/>. </t> <t> As with the case of NFS4ERR_DELAY, it is possible that one or more non-idempotent operations may have been successfully executed within a COMPOUND before NFS4ERR_MOVED is returned. Because of this, once the new location is determined, the original requestwhichthat received the NFS4ERR_MOVED should not be re-executed in full. Instead, the client should send a newCOMPOUND,COMPOUND with any successfully executed non-idempotent operations removed. When the client uses the same session for the new COMPOUND, its SEQUENCE operation should use a different slotidID or sequence. </t> </section> <sectiontitle="NFS4ERR_NOFILEHANDLEanchor="err_NOFILEHANDLE" numbered="true" toc="default"> <name>NFS4ERR_NOFILEHANDLE (Error Code10020)" anchor="err_NOFILEHANDLE">10020)</name> <t> The logical current or saved filehandle value is required by the current operation and is not set. This may be a result of a malformed COMPOUND operation (i.e., no PUTFH or PUTROOTFH before an operation that requires the current filehandle be set). </t> </section> <sectiontitle="NFS4ERR_NOTDIRanchor="err_NOTDIR" numbered="true" toc="default"> <name>NFS4ERR_NOTDIR (Error Code20)" anchor="err_NOTDIR">20)</name> <t> The current (or saved) filehandle designates an object that is not a directory for an operation in which a directory is required. </t> </section> <sectiontitle="NFS4ERR_STALEanchor="err_STALE" numbered="true" toc="default"> <name>NFS4ERR_STALE (Error Code70)" anchor="err_STALE">70)</name> <t> The current or saved filehandle value designating an argument to the current operation is invalid. The file referred to by that filehandle no longer exists or access to it has been revoked. </t> </section> <sectiontitle="NFS4ERR_SYMLINKanchor="err_SYMLINK" numbered="true" toc="default"> <name>NFS4ERR_SYMLINK (Error Code10029)" anchor="err_SYMLINK">10029)</name> <t> The current filehandle designates a symbolic link when the current operation does not allow a symbolic link as the target. </t> </section> <sectiontitle="NFS4ERR_WRONG_TYPEanchor="err_WRONG_TYPE" numbered="true" toc="default"> <name>NFS4ERR_WRONG_TYPE (Error Code10083)" anchor="err_WRONG_TYPE">10083)</name> <t> The current (or saved) filehandle designates an object that is of an invalid type for the current operation, and there is no more specific error (such as NFS4ERR_ISDIR or NFS4ERR_SYMLINK) that applies. Note that in NFSv4.0, such situations generally resulted in the less-specific error NFS4ERR_INVAL. </t> </section> </section> <sectiontitle="Compoundanchor="errors_comp" numbered="true" toc="default"> <name>Compound StructureErrors" anchor="errors_comp">Errors</name> <t> This section deals with errors that relate to the overall structure of a Compound request (by which we mean to include both COMPOUND and CB_COMPOUND), rather than to particular operations. </t> <t> There are a number of basic constraints on the operations that may appear in a Compound request. Sessions add to these basic constraints by requiring a Sequence operation (either SEQUENCE or CB_SEQUENCE) at the start of the Compound. </t> <sectiontitle="NFS_OKanchor="err_OK" numbered="true" toc="default"> <name>NFS_OK (Error code0)" anchor="err_OK">0)</name> <t> Indicates the operation completed successfully, in that all of the constituent operations completed without error. </t> </section> <sectiontitle="NFS4ERR_MINOR_VERS_MISMATCHanchor="err_MINOR_VERS_MISMATCH" numbered="true" toc="default"> <name>NFS4ERR_MINOR_VERS_MISMATCH (Error code10021)" anchor="err_MINOR_VERS_MISMATCH">10021)</name> <t> The minor version specified is not one that the current listener supports. This value is returned in the overall status for the Compound but is not associated with a specific operation since the results will specify a result count of zero. </t> </section> <sectiontitle="NFS4ERR_NOT_ONLY_OPanchor="err_NOT_ONLY_OP" numbered="true" toc="default"> <name>NFS4ERR_NOT_ONLY_OP (Error Code10081)" anchor="err_NOT_ONLY_OP">10081)</name> <t> Certain operations, which are allowed to be executed outside of a session,MUST<bcp14>MUST</bcp14> be the only operation within a Compound whenever the Compound does not start with a Sequence operation. This error results when that constraint is not met. </t> </section> <sectiontitle="NFS4ERR_OP_ILLEGALanchor="err_OP_ILLEGAL" numbered="true" toc="default"> <name>NFS4ERR_OP_ILLEGAL (Error Code10044)" anchor="err_OP_ILLEGAL">10044)</name> <t> The operation code is not a valid one for the current Compound procedure. The opcode in the result stream matched with this error is the ILLEGAL value, although the value that appears in the request stream may be different. Where an illegal value appears and the replier pre-parses all operations for a Compound procedure before doing any operation execution, an RPC-level XDR error may be returned. </t> </section> <sectiontitle="NFS4ERR_OP_NOT_IN_SESSIONanchor="err_OP_NOT_IN_SESSION" numbered="true" toc="default"> <name>NFS4ERR_OP_NOT_IN_SESSION (Error Code10071)" anchor="err_OP_NOT_IN_SESSION">10071)</name> <t> Most forward operations and all callback operations are only valid within the context of a session, so that the Compound request in questionMUST<bcp14>MUST</bcp14> begin with a Sequence operation. If an attempt is made to execute these operations outside the context of session, this error results. </t> </section> <sectiontitle="NFS4ERR_REP_TOO_BIGanchor="err_REP_TOO_BIG" numbered="true" toc="default"> <name>NFS4ERR_REP_TOO_BIG (Error Code10066)" anchor="err_REP_TOO_BIG">10066)</name> <t> The reply to a Compound would exceed the channel's negotiated maximum response size. </t> </section> <sectiontitle="NFS4ERR_REP_TOO_BIG_TO_CACHEanchor="err_REP_TOO_BIG_TO_CACHE" numbered="true" toc="default"> <name>NFS4ERR_REP_TOO_BIG_TO_CACHE (Error Code10067)" anchor="err_REP_TOO_BIG_TO_CACHE">10067)</name> <t> The reply to a Compound would exceed the channel's negotiated maximum size for replies cached in the reply cache when the Sequence for the current request specifies that this request is to be cached. </t> </section> <sectiontitle="NFS4ERR_REQ_TOO_BIGanchor="err_REQ_TOO_BIG" numbered="true" toc="default"> <name>NFS4ERR_REQ_TOO_BIG (Error Code10065)" anchor="err_REQ_TOO_BIG">10065)</name> <t> The Compound request exceeds the channel's negotiated maximum size for requests. </t> </section> <sectiontitle="NFS4ERR_RETRY_UNCACHED_REPanchor="err_RETRY_UNCACHED_REP" numbered="true" toc="default"> <name>NFS4ERR_RETRY_UNCACHED_REP (Error Code10068)" anchor="err_RETRY_UNCACHED_REP">10068)</name> <t> The requester has attempted a retry of a Compound that it previously requested not be placed in the reply cache. </t> </section> <sectiontitle="NFS4ERR_SEQUENCE_POSanchor="err_SEQUENCE_POS" numbered="true" toc="default"> <name>NFS4ERR_SEQUENCE_POS (Error Code10064)" anchor="err_SEQUENCE_POS">10064)</name> <t> A Sequence operation appeared in a position other than the first operation of a Compound request. </t> </section> <sectiontitle="NFS4ERR_TOO_MANY_OPSanchor="err_TOO_MANY_OPS" numbered="true" toc="default"> <name>NFS4ERR_TOO_MANY_OPS (Error Code10070)" anchor="err_TOO_MANY_OPS">10070)</name> <t> The Compound request has too many operations, exceeding the count negotiated when the session was created. </t> </section> <sectiontitle="NFS4ERR_UNSAFE_COMPOUNDanchor="err_UNSAFE_COMPOUND" numbered="true" toc="default"> <name>NFS4ERR_UNSAFE_COMPOUND (Error Code10068)" anchor="err_UNSAFE_COMPOUND">10068)</name> <t> The client has sent a COMPOUND request with an unsafe mix of operations -- specifically, with a non-idempotent operation that changes the current filehandle and that is not followed by a GETFH. </t> </section> </section> <sectiontitle="Fileanchor="errors_fs" numbered="true" toc="default"> <name>File SystemErrors" anchor="errors_fs">Errors</name> <t> These errors describe situations that occurred in the underlying file system implementation rather than in the protocol or any NFSv4.x feature. </t> <sectiontitle="NFS4ERR_BADTYPEanchor="err_BADTYPE" numbered="true" toc="default"> <name>NFS4ERR_BADTYPE (Error Code10007)" anchor="err_BADTYPE">10007)</name> <t> An attempt was made to create an object with an inappropriate type specified to CREATE. This may be because the type is undefined, because the type is not supported by the server, or because the type is not intended to be created by CREATE (such as a regular file or named attribute, for which OPEN is used to do the file creation). </t> </section> <sectiontitle="NFS4ERR_DQUOTanchor="err_DQUOT" numbered="true" toc="default"> <name>NFS4ERR_DQUOT (Error Code19)" anchor="err_DQUOT">69)</name> <t> Resource (quota) hard limit exceeded. The user's resource limit on the server has been exceeded. </t> </section> <sectiontitle="NFS4ERR_EXISTanchor="err_EXIST" numbered="true" toc="default"> <name>NFS4ERR_EXIST (Error Code17)" anchor="err_EXIST">17)</name> <t> A file of the specified target name (when creating, renaming, or linking) already exists. </t> </section> <sectiontitle="NFS4ERR_FBIGanchor="err_FBIG" numbered="true" toc="default"> <name>NFS4ERR_FBIG (Error Code27)" anchor="err_FBIG">27)</name> <t> The file is too large. The operation would have caused the file to grow beyond the server's limit. </t> </section> <sectiontitle="NFS4ERR_FILE_OPENanchor="err_FILE_OPEN" numbered="true" toc="default"> <name>NFS4ERR_FILE_OPEN (Error Code10046)" anchor="err_FILE_OPEN">10046)</name> <t> The operation is not allowed because a file involved in the operation is currently open. Servers may, but are not required to, disallow linking-to, removing, or renaming open files. </t> </section> <sectiontitle="NFS4ERR_IOanchor="err_IO" numbered="true" toc="default"> <name>NFS4ERR_IO (Error Code5)" anchor="err_IO">5)</name> <t> Indicates that an I/O error occurred for which the file system was unable to provide recovery. </t> </section> <sectiontitle="NFS4ERR_MLINKanchor="err_MLINK" numbered="true" toc="default"> <name>NFS4ERR_MLINK (Error Code31)" anchor="err_MLINK">31)</name> <t> The request would have caused the server's limit for the number of hard links a file may have to be exceeded. </t> </section> <sectiontitle="NFS4ERR_NOENTanchor="err_NOENT" numbered="true" toc="default"> <name>NFS4ERR_NOENT (Error Code2)" anchor="err_NOENT">2)</name> <t> Indicates no such file or directory. The file or directory name specified does not exist. </t> </section> <sectiontitle="NFS4ERR_NOSPCanchor="err_NOSPC" numbered="true" toc="default"> <name>NFS4ERR_NOSPC (Error Code28)" anchor="err_NOSPC">28)</name> <t> Indicates there is no space left on the device. The operation would have caused the server's file system to exceed its limit. </t> </section> <sectiontitle="NFS4ERR_NOTEMPTYanchor="err_NOTEMPTY" numbered="true" toc="default"> <name>NFS4ERR_NOTEMPTY (Error Code66)" anchor="err_NOTEMPTY">66)</name> <t> An attempt was made to remove a directory that was not empty. </t> </section> <sectiontitle="NFS4ERR_ROFSanchor="err_ROFS" numbered="true" toc="default"> <name>NFS4ERR_ROFS (Error Code30)" anchor="err_ROFS">30)</name> <t> Indicates a read-only file system. A modifying operation was attempted on a read-only file system. </t> </section> <sectiontitle="NFS4ERR_XDEVanchor="err_XDEV" numbered="true" toc="default"> <name>NFS4ERR_XDEV (Error Code18)" anchor="err_XDEV">18)</name> <t> Indicates an attempt to do an operation, such as linking, that inappropriately crosses a boundary. This may be due to such boundaries as:<list style="symbols"> <t></t> <ul spacing="normal"> <li> that between file systems (where the fsids are different).</t> <t></li> <li> that between different named attribute directories or between a named attribute directory and an ordinary directory.</t> <t></li> <li> that between byte-ranges of a file system that the file system implementation treats as separate (for example, for space accounting purposes), and where cross-connection between the byte-ranges are not allowed.</t> </list> </t></li> </ul> </section> </section> <sectiontitle="Stateanchor="errors_state_mgt" numbered="true" toc="default"> <name>State ManagementErrors" anchor="errors_state_mgt">Errors</name> <t> These errors indicate problems with the stateid (or one of the stateids) passed to a given operation. This includes situations in which the stateid is invalid as well as situations in which the stateid is valid but designates locking state that has been revoked. Depending on the operation, the stateid when valid may designate opens, byte-range locks, file or directory delegations, layouts, or device maps. </t> <sectiontitle="NFS4ERR_ADMIN_REVOKEDanchor="err_ADMIN_REVOKED" numbered="true" toc="default"> <name>NFS4ERR_ADMIN_REVOKED (Error Code10047)" anchor="err_ADMIN_REVOKED">10047)</name> <t> A stateid designates locking state of any type that has been revoked due to administrative interaction, possibly while the lease is valid. </t> </section> <sectiontitle="NFS4ERR_BAD_STATEIDanchor="err_BAD_STATEID" numbered="true" toc="default"> <name>NFS4ERR_BAD_STATEID (Error Code10026)" anchor="err_BAD_STATEID">10026)</name> <t> A stateid does not properly designate any valid state. See Sections <xref target="stateid_lifetime"format="counter" />format="counter"/> and <xref target="special_stateid"format="counter" />format="counter"/> for a discussion of how stateids are validated. </t> </section> <sectiontitle="NFS4ERR_DELEG_REVOKEDanchor="err_DELEG_REVOKED" numbered="true" toc="default"> <name>NFS4ERR_DELEG_REVOKED (Error Code10087)" anchor="err_DELEG_REVOKED">10087)</name> <t> A stateid designates recallable locking state of any type (delegation or layout) that has been revoked due to the failure of the client to return the lock when it was recalled. </t> </section> <sectiontitle="NFS4ERR_EXPIREDanchor="err_EXPIRED" numbered="true" toc="default"> <name>NFS4ERR_EXPIRED (Error Code10011)" anchor="err_EXPIRED">10011)</name> <t> A stateid designates locking state of any type that has been revoked due to expiration of the client's lease, either immediately upon lease expiration, or following a later request for a conflicting lock. </t> </section> <sectiontitle="NFS4ERR_OLD_STATEIDanchor="err_OLD_STATEID" numbered="true" toc="default"> <name>NFS4ERR_OLD_STATEID (Error Code10024)" anchor="err_OLD_STATEID">10024)</name> <t> A stateid with a non-zero seqid value does match the current seqid for the state designated by the user. </t> </section> </section> <sectiontitle="Security Errors" anchor="errors_sec">anchor="errors_sec" numbered="true" toc="default"> <name>Security Errors</name> <t> These are the various permission-related errors in NFSv4.1. </t> <sectiontitle="NFS4ERR_ACCESSanchor="err_ACCESS" numbered="true" toc="default"> <name>NFS4ERR_ACCESS (Error Code13)" anchor="err_ACCESS">13)</name> <t> Indicates permission denied. The caller does not have the correct permission to perform the requested operation. Contrast this with NFS4ERR_PERM (<xref target="err_PERM"/>),format="default"/>), which restricts itself to owner or privileged-user permission failures, and NFS4ERR_WRONG_CRED (<xref target="err_WRONG_CRED"/>),format="default"/>), which deals with appropriate permission to delete or modify transient objects based on the credentials of the user that created them. </t> </section> <sectiontitle="NFS4ERR_PERManchor="err_PERM" numbered="true" toc="default"> <name>NFS4ERR_PERM (Error Code1)" anchor="err_PERM">1)</name> <t> Indicates requester is not the owner. The operation was not allowed because the caller is neither a privileged user (root) nor the owner of the target of the operation. </t> </section> <sectiontitle="NFS4ERR_WRONGSECanchor="err_WRONGSEC" numbered="true" toc="default"> <name>NFS4ERR_WRONGSEC (Error Code10016)" anchor="err_WRONGSEC">10016)</name> <t> Indicates that the security mechanism being used by the client for the operation does not match the server's security policy. The client should change the security mechanism being used and re-send the operation (but not with the same slot ID and sequence ID; one or bothMUST<bcp14>MUST</bcp14> be different on the re-send). SECINFO and SECINFO_NO_NAME can be used to determine the appropriate mechanism. </t> </section> <sectiontitle="NFS4ERR_WRONG_CREDanchor="err_WRONG_CRED" numbered="true" toc="default"> <name>NFS4ERR_WRONG_CRED (Error Code10082)" anchor="err_WRONG_CRED">10082)</name> <t> An operation that manipulates state was attempted by a principal that was not allowed to modify that piece of state. </t> </section> </section> <sectiontitle="Name Errors" anchor="errors_name">anchor="errors_name" numbered="true" toc="default"> <name>Name Errors</name> <t> Names in NFSv4 are UTF-8 strings. When the strings are not valid UTF-8 or are of length zero, the error NFS4ERR_INVAL results. Besides this, there are a number of other errors to indicate specific problems with names. </t> <sectiontitle="NFS4ERR_BADCHARanchor="err_BADCHAR" numbered="true" toc="default"> <name>NFS4ERR_BADCHAR (Error Code10040)" anchor="err_BADCHAR">10040)</name> <t> A UTF-8 string contains a character that is not supported by the server in the context in which it being used. </t> </section> <sectiontitle="NFS4ERR_BADNAMEanchor="err_BADNAME" numbered="true" toc="default"> <name>NFS4ERR_BADNAME (Error Code10041)" anchor="err_BADNAME">10041)</name> <t> A name string in a request consisted of valid UTF-8 characters supported by the server, but the name is not supported by the server as a valid name for the current operation. An example might be creating a file or directory named ".." on a server whose file system uses that name for links to parent directories. </t> </section> <sectiontitle="NFS4ERR_NAMETOOLONGanchor="err_NAMETOOLONG" numbered="true" toc="default"> <name>NFS4ERR_NAMETOOLONG (Error Code63)" anchor="err_NAMETOOLONG">63)</name> <t> Returned when the filename in an operation exceeds the server's implementation limit. </t> </section> </section> <sectiontitle="Locking Errors" anchor="errors_locking">anchor="errors_locking" numbered="true" toc="default"> <name>Locking Errors</name> <t> This section deals with errors related to locking, both as to share reservations and byte-range locking. It does not deal with errors specific to the process of reclaiming locks. Those are dealt with in <xreftarget="errors_reclaim"></xref>.target="errors_reclaim" format="default"/>. </t> <sectiontitle="NFS4ERR_BAD_RANGEanchor="err_BAD_RANGE" numbered="true" toc="default"> <name>NFS4ERR_BAD_RANGE (Error Code10042)" anchor="err_BAD_RANGE">10042)</name> <t> The byte-range of a LOCK, LOCKT, or LOCKU operation is not allowed by the server. For example, this error results when a server that only supports 32-bit ranges receives a range that cannot be handled by that server. (See <xref target="OP_LOCK_DESCRIPTION"/>.)format="default"/>.) </t> </section> <sectiontitle="NFS4ERR_DEADLOCKanchor="err_DEADLOCK" numbered="true" toc="default"> <name>NFS4ERR_DEADLOCK (Error Code10045)" anchor="err_DEADLOCK">10045)</name> <t> The server has been able to determine a byte-range locking deadlock condition for a READW_LT or WRITEW_LT LOCK operation. </t> </section> <sectiontitle="NFS4ERR_DENIEDanchor="err_DENIED" numbered="true" toc="default"> <name>NFS4ERR_DENIED (Error Code10010)" anchor="err_DENIED">10010)</name> <t> An attempt to lock a file is denied. Since this may be a temporary condition, the client is encouraged to re-send the lock request (but not with the same slot ID and sequence ID; one or bothMUST<bcp14>MUST</bcp14> be different on the re-send) until the lock is accepted. See <xref target="blocking_locks"/>format="default"/> for a discussion of the re-send. </t> </section> <sectiontitle="NFS4ERR_LOCKEDanchor="err_LOCKED" numbered="true" toc="default"> <name>NFS4ERR_LOCKED (Error Code10012)" anchor="err_LOCKED">10012)</name> <t> A READ or WRITE operation was attempted on a file where there was a conflict between the I/O and an existing lock:<list style="symbols"> <t></t> <ul spacing="normal"> <li> There is a share reservation inconsistent with the I/O being done.</t> <t></li> <li> The range to be read or written intersects an existing mandatory byte-range lock.</t> </list> </t></li> </ul> </section> <sectiontitle="NFS4ERR_LOCKS_HELDanchor="err_LOCKS_HELD" numbered="true" toc="default"> <name>NFS4ERR_LOCKS_HELD (Error Code10037)" anchor="err_LOCKS_HELD">10037)</name> <t> An operation was prevented by the unexpected presence of locks. </t> </section> <sectiontitle="NFS4ERR_LOCK_NOTSUPPanchor="err_LOCK_NOTSUPP" numbered="true" toc="default"> <name>NFS4ERR_LOCK_NOTSUPP (Error Code10043)" anchor="err_LOCK_NOTSUPP">10043)</name> <t> A LOCK operation was attempted that would require the upgrade or downgrade of a byte-range lock range already held by the owner, and the server does not support atomic upgrade or downgrade of locks. </t> </section> <sectiontitle="NFS4ERR_LOCK_RANGEanchor="err_LOCK_RANGE" numbered="true" toc="default"> <name>NFS4ERR_LOCK_RANGE (Error Code10028)" anchor="err_LOCK_RANGE">10028)</name> <t> A LOCK operation is operating on a range that overlaps in part a currently held byte-range lock for the current lock-owner and does not precisely match a single such byte-range lock where the server does not support this type of request, and thus does not implement POSIX locking semantics <xreftarget="fcntl"/>.target="fcntl" format="default"/>. See Sections <xref target="OP_LOCK_IMPLEMENTATION"format="counter" />,format="counter"/>, <xref target="OP_LOCKT_IMPLEMENTATION"format="counter" />,format="counter"/>, and <xref target="OP_LOCKU_IMPLEMENTATION"format="counter" />format="counter"/> for a discussion of how this applies to LOCK, LOCKT, and LOCKU respectively. </t> </section> <sectiontitle="NFS4ERR_OPENMODEanchor="err_OPENMODE" numbered="true" toc="default"> <name>NFS4ERR_OPENMODE (Error Code10038)" anchor="err_OPENMODE">10038)</name> <t> The client attempted a READ, WRITE, LOCK, or other operation not sanctioned by the stateid passed (e.g., writing to a file opened for read-only access). </t> </section> <sectiontitle="NFS4ERR_SHARE_DENIEDanchor="err_SHARE_DENIED" numbered="true" toc="default"> <name>NFS4ERR_SHARE_DENIED (Error Code10015)" anchor="err_SHARE_DENIED">10015)</name> <t> An attempt to OPEN a file with a share reservation has failed because of a share conflict. </t> </section> </section> <sectiontitle="Reclaim Errors" anchor="errors_reclaim">anchor="errors_reclaim" numbered="true" toc="default"> <name>Reclaim Errors</name> <t> These errors relate to the process of reclaiming locks after a server restart. </t> <sectiontitle="NFS4ERR_COMPLETE_ALREADYanchor="err_COMPLETE_ALREADY" numbered="true" toc="default"> <name>NFS4ERR_COMPLETE_ALREADY (Error Code10054)" anchor="err_COMPLETE_ALREADY">10054)</name> <t> The client previously sent a successful RECLAIM_COMPLETE operation specifying the same scope, whether that scope is global or for the same file system in the case of a per-fs RECLAIM_COMPLETE. An additional RECLAIM_COMPLETE operation is not necessary and results in this error. </t> </section> <sectiontitle="NFS4ERR_GRACEanchor="err_GRACE" numbered="true" toc="default"> <name>NFS4ERR_GRACE (Error Code10013)" anchor="err_GRACE">10013)</name> <t> This error is returned when the server is in its grace period with regard to the file system object for which the lock was requested. In this situation, a non-reclaim locking request cannot be granted. This can occur becauseeither <list style="symbols"> <t>either: </t> <ul spacing="normal"> <li> The server does not have sufficient information about locks that might be potentially reclaimed to determine whether the lock could be granted.</t> <t></li> <li> The request is made by a client responsible for reclaiming its locks that has not yet done the appropriate RECLAIM_COMPLETE operation, allowing it to proceed to obtain new locks.</t> </list> </t></li> </ul> <t> In the case of a per-fs grace period, there may beclients,clients (i.e., those currently using the destination file system) who might be unaware of the circumstances resulting in the initiation of the grace period. Such clients need to periodically retry the request until the grace period is over, just as other clients do. </t> </section> <sectiontitle="NFS4ERR_NO_GRACEanchor="err_NO_GRACE" numbered="true" toc="default"> <name>NFS4ERR_NO_GRACE (Error Code10033)" anchor="err_NO_GRACE">10033)</name> <t> A reclaim of client state was attempted in circumstances in which the server cannot guarantee that conflicting state has not been provided to another client. This occurs in any of the followingsituations. <list style="symbols"> <t>situations: </t> <ul spacing="normal"> <li> There is no active grace period applying to the file system object for which the request was made.</t> <t></li> <li> The client making the request has no current role in reclaiming locks.</t> <t></li> <li> Previous operations have created a situation in which the server is not able to determine that a reclaim-interfering edge condition does not exist.</t> </list> </t></li> </ul> </section> <sectiontitle="NFS4ERR_RECLAIM_BADanchor="err_RECLAIM_BAD" numbered="true" toc="default"> <name>NFS4ERR_RECLAIM_BAD (Error Code10034)" anchor="err_RECLAIM_BAD">10034)</name> <t> The server has determined that a reclaim attempted by the client is not valid,i.e.i.e., the lock specified as being reclaimed could not possibly have existed before the server restart or file system migration event. A server is not obliged to make this determination and will typically rely on the client to only reclaim locks that the client was granted prior to restart. However, when a server does have reliable information to enable it to make this determination, this error indicates that the reclaim has been rejected as invalid. This is as opposed to the error NFS4ERR_RECLAIM_CONFLICT (see <xreftarget="err_RECLAIM_CONFLICT"/>)target="err_RECLAIM_CONFLICT" format="default"/>) where the server can only determine that there has been an invalid reclaim, but cannot determine which request is invalid. </t> </section> <sectiontitle="NFS4ERR_RECLAIM_CONFLICTanchor="err_RECLAIM_CONFLICT" numbered="true" toc="default"> <name>NFS4ERR_RECLAIM_CONFLICT (Error Code10035)" anchor="err_RECLAIM_CONFLICT">10035)</name> <t> The reclaim attempted by the client has encountered a conflict and cannot be satisfied. This potentially indicates a misbehaving client, although not necessarily the one receiving the error. The misbehavior might be on the part of the client that established the lock with which this client conflicted. See also <xreftarget="err_RECLAIM_BAD"/>target="err_RECLAIM_BAD" format="default"/> for the related error, NFS4ERR_RECLAIM_BAD. </t> </section> </section> <sectiontitle="pNFS Errors" anchor="errors_pnfs">anchor="errors_pnfs" numbered="true" toc="default"> <name>pNFS Errors</name> <t> This section deals with pNFS-related errors including those that are associated with using NFSv4.1 to communicate with a data server. </t> <sectiontitle="NFS4ERR_BADIOMODEanchor="err_BADIOMODE" numbered="true" toc="default"> <name>NFS4ERR_BADIOMODE (Error Code10049)" anchor="err_BADIOMODE">10049)</name> <t> An invalid or inappropriate layout iomode was specified. For example an inappropriate layout iomode, suppose a client's LAYOUTGET operation specified an iomode of LAYOUTIOMODE4_RW, and the server is neither able nor willing to let the client send write requests to data servers; the server can reply with NFS4ERR_BADIOMODE. The client would then send another LAYOUTGET with an iomode of LAYOUTIOMODE4_READ. </t> </section> <sectiontitle="NFS4ERR_BADLAYOUTanchor="err_BADLAYOUT" numbered="true" toc="default"> <name>NFS4ERR_BADLAYOUT (Error Code10050)" anchor="err_BADLAYOUT">10050)</name> <t> The layout specified is invalid in some way. For LAYOUTCOMMIT, this indicates that the specified layout is not held by the client or is not of mode LAYOUTIOMODE4_RW. For LAYOUTGET, it indicates that a layout matching the client's specification as to minimum length cannot be granted. </t> </section> <sectiontitle="NFS4ERR_LAYOUTTRYLATERanchor="err_LAYOUTTRYLATER" numbered="true" toc="default"> <name>NFS4ERR_LAYOUTTRYLATER (Error Code10058)" anchor="err_LAYOUTTRYLATER">10058)</name> <t> Layouts are temporarily unavailable for the file. The client should re-send later (but not with the same slot ID and sequence ID; one or bothMUST<bcp14>MUST</bcp14> be different on the re-send). </t> </section> <sectiontitle="NFS4ERR_LAYOUTUNAVAILABLEanchor="err_LAYOUTUNAVAILABLE" numbered="true" toc="default"> <name>NFS4ERR_LAYOUTUNAVAILABLE (Error Code10059)" anchor="err_LAYOUTUNAVAILABLE">10059)</name> <t> Returned when layouts are not available for the current file system or the particular specified file. </t> </section> <sectiontitle="NFS4ERR_NOMATCHING_LAYOUTanchor="err_NOMATCHING_LAYOUT" numbered="true" toc="default"> <name>NFS4ERR_NOMATCHING_LAYOUT (Error Code10060)" anchor="err_NOMATCHING_LAYOUT">10060)</name> <t> Returned when layouts are recalled and the client has no layouts matching the specification of the layouts being recalled. </t> </section> <sectiontitle="NFS4ERR_PNFS_IO_HOLEanchor="err_PNFS_IO_HOLE" numbered="true" toc="default"> <name>NFS4ERR_PNFS_IO_HOLE (Error Code10075)" anchor="err_PNFS_IO_HOLE">10075)</name> <t> The pNFS client has attempted to read from or write to an illegal hole of a file of a data server that is using sparse packing. See <xref target="sparse_dense"/>.format="default"/>. </t> </section> <sectiontitle="NFS4ERR_PNFS_NO_LAYOUTanchor="err_PNFS_NO_LAYOUT" numbered="true" toc="default"> <name>NFS4ERR_PNFS_NO_LAYOUT (Error Code10080)" anchor="err_PNFS_NO_LAYOUT">10080)</name> <t> The pNFS client has attempted to read from or write to a file (using a request to a data server) without holding a valid layout. This includes the case where the client had a layout, but the iomode does not allow a WRITE. </t> </section> <sectiontitle="NFS4ERR_RETURNCONFLICTanchor="err_RETURNCONFLICT" numbered="true" toc="default"> <name>NFS4ERR_RETURNCONFLICT (Error Code10086)" anchor="err_RETURNCONFLICT">10086)</name> <t> A layout is unavailable due to an attempt to perform the LAYOUTGET before a pending LAYOUTRETURN on the file has been received. See <xref target="layout_server_consider"/>.format="default"/>. </t> </section> <sectiontitle="NFS4ERR_UNKNOWN_LAYOUTTYPEanchor="err_UNKNOWN_LAYOUTTYPE" numbered="true" toc="default"> <name>NFS4ERR_UNKNOWN_LAYOUTTYPE (Error Code10062)" anchor="err_UNKNOWN_LAYOUTTYPE">10062)</name> <t> The client has specified a layout type that is not supported by the server. </t> </section> </section> <sectiontitle="Sessionanchor="errors_sess_use" numbered="true" toc="default"> <name>Session UseErrors" anchor="errors_sess_use">Errors</name> <t> This section deals with errors encountered when using sessions, that is, errors encountered when a request uses a Sequence (i.e., either SEQUENCE or CB_SEQUENCE) operation. </t> <sectiontitle="NFS4ERR_BADSESSIONanchor="err_BADSESSION" numbered="true" toc="default"> <name>NFS4ERR_BADSESSION (Error Code10052)" anchor="err_BADSESSION">10052)</name> <t> The specified session ID is unknown to the server to which the operation is addressed. </t> </section> <sectiontitle="NFS4ERR_BADSLOTanchor="err_BADSLOT" numbered="true" toc="default"> <name>NFS4ERR_BADSLOT (Error Code10053)" anchor="err_BADSLOT">10053)</name> <t> The requester sent a Sequence operation that attempted to use a slot the replier does not have in its slot table. It is possible the slot may have been retired. </t> </section> <sectiontitle="NFS4ERR_BAD_HIGH_SLOTanchor="err_BAD_HIGH_SLOT" numbered="true" toc="default"> <name>NFS4ERR_BAD_HIGH_SLOT (Error Code10077)" anchor="err_BAD_HIGH_SLOT">10077)</name> <t> The highest_slot argument in a Sequence operation exceeds the replier's enforced highest_slotid. </t> </section> <sectiontitle="NFS4ERR_CB_PATH_DOWNanchor="err_CB_PATH_DOWN" numbered="true" toc="default"> <name>NFS4ERR_CB_PATH_DOWN (Error Code10048)" anchor="err_CB_PATH_DOWN">10048)</name> <t> There is a problem contacting the client via the callback path. The function of this error has been mostly superseded by the use of status flags in the reply to the SEQUENCE operation (see <xref target="OP_SEQUENCE"/>).format="default"/>). </t> </section> <sectiontitle="NFS4ERR_DEADSESSIONanchor="err_DEADSESSION" numbered="true" toc="default"> <name>NFS4ERR_DEADSESSION (Error Code10078)" anchor="err_DEADSESSION">10078)</name> <t> The specified session is a persistent session that is dead and does not accept new requests or perform new operations on existing requests (in the case in which a request was partially executed before server restart). </t> </section> <sectiontitle="NFS4ERR_CONN_NOT_BOUND_TO_SESSIONanchor="err_CONN_NOT_BOUND_TO_SESSION" numbered="true" toc="default"> <name>NFS4ERR_CONN_NOT_BOUND_TO_SESSION (Error Code10055)" anchor="err_CONN_NOT_BOUND_TO_SESSION">10055)</name> <t> A Sequence operation was sent on a connection that has not been associated with the specified session, where the client specified that connection association was to be enforced with SP4_MACH_CRED or SP4_SSV state protection. </t> </section> <sectiontitle="NFS4ERR_SEQ_FALSE_RETRYanchor="err_SEQ_FALSE_RETRY" numbered="true" toc="default"> <name>NFS4ERR_SEQ_FALSE_RETRY (Error Code10076)" anchor="err_SEQ_FALSE_RETRY">10076)</name> <t> The requester sent a Sequence operation with a slot ID and sequence ID that are in the reply cache, but the replier has detected that the retried request is not the same as the original request. See <xreftarget="false_retry"/>.target="false_retry" format="default"/>. </t> </section> <sectiontitle="NFS4ERR_SEQ_MISORDEREDanchor="err_SEQ_MISORDERED" numbered="true" toc="default"> <name>NFS4ERR_SEQ_MISORDERED (Error Code10063)" anchor="err_SEQ_MISORDERED">10063)</name> <t> The requester sent a Sequence operation with an invalid sequence ID. </t> </section> </section> <sectiontitle="Sessionanchor="errors_sess_mgt" numbered="true" toc="default"> <name>Session ManagementErrors" anchor="errors_sess_mgt">Errors</name> <t> This section deals with errors associated with requests used in session management. </t> <sectiontitle="NFS4ERR_BACK_CHAN_BUSYanchor="err_BACK_CHAN_BUSY" numbered="true" toc="default"> <name>NFS4ERR_BACK_CHAN_BUSY (Error Code10057)" anchor="err_BACK_CHAN_BUSY">10057)</name> <t> An attempt was made to destroy a session when the session cannot be destroyed because the server has callback requests outstanding. </t> </section> <sectiontitle="NFS4ERR_BAD_SESSION_DIGESTanchor="err_BAD_SESSION_DIGEST" numbered="true" toc="default"> <name>NFS4ERR_BAD_SESSION_DIGEST (Error Code10051)" anchor="err_BAD_SESSION_DIGEST">10051)</name> <t> The digest used in a SET_SSV request is not valid. </t> </section> </section> <sectiontitle="Clientanchor="errors_client_mgt" numbered="true" toc="default"> <name>Client ManagementErrors" anchor="errors_client_mgt">Errors</name> <t> This section deals with errors associated with requests used to create and manage client IDs. </t> <sectiontitle="NFS4ERR_CLIENTID_BUSYanchor="err_CLIENTID_BUSY" numbered="true" toc="default"> <name>NFS4ERR_CLIENTID_BUSY (Error Code10074)" anchor="err_CLIENTID_BUSY">10074)</name> <t> The DESTROY_CLIENTID operation has found there are sessions and/or unexpired state associated with the client ID to be destroyed. </t> </section> <sectiontitle="NFS4ERR_CLID_INUSEanchor="err_CLID_INUSE" numbered="true" toc="default"> <name>NFS4ERR_CLID_INUSE (Error Code10017)" anchor="err_CLID_INUSE">10017)</name> <t> While processing an EXCHANGE_ID operation, the server was presented with a co_ownerid field that matches an existing client with valid leased state, but the principal sending the EXCHANGE_ID operation differs from the principal that established the existing client. This indicates a collision (most likely due to chance) between clients. The client should recover by changing the co_ownerid and re-sending EXCHANGE_ID (but not with the same slot ID and sequence ID; one or bothMUST<bcp14>MUST</bcp14> be different on the re-send). </t> </section> <sectiontitle="NFS4ERR_ENCR_ALG_UNSUPPanchor="err_ENCR_ALG_UNSUPP" numbered="true" toc="default"> <name>NFS4ERR_ENCR_ALG_UNSUPP (Error Code10079)" anchor="err_ENCR_ALG_UNSUPP">10079)</name> <t> An EXCHANGE_ID was sent that specified state protection via SSV, and where the set of encryption algorithms presented by the client did not include any supported by the server. </t> </section> <sectiontitle="NFS4ERR_HASH_ALG_UNSUPPanchor="err_HASH_ALG_UNSUPP" numbered="true" toc="default"> <name>NFS4ERR_HASH_ALG_UNSUPP (Error Code10072)" anchor="err_HASH_ALG_UNSUPP">10072)</name> <t> An EXCHANGE_ID was sent that specified state protection via SSV, and where the set of hashing algorithms presented by the client did not include any supported by the server. </t> </section> <sectiontitle="NFS4ERR_STALE_CLIENTIDanchor="err_STALE_CLIENTID" numbered="true" toc="default"> <name>NFS4ERR_STALE_CLIENTID (Error Code10022)" anchor="err_STALE_CLIENTID">10022)</name> <t> A client ID not recognized by the server was passed to an operation. Note that unlike the case of NFSv4.0, client IDs are not passed explicitly to the server in ordinary locking operations and cannot result in this error. Instead, when there is a server restart, it is first manifested through an error on the associated session, and the staleness of the client ID is detected when trying to associate a client ID with a new session. </t> </section> </section> <sectiontitle="Delegation Errors" anchor="errors_deleg">anchor="errors_deleg" numbered="true" toc="default"> <name>Delegation Errors</name> <t> This section deals with errors associated with requesting and returning delegations. </t> <sectiontitle="NFS4ERR_DELEG_ALREADY_WANTEDanchor="err_DELEG_ALREADY_WANTED" numbered="true" toc="default"> <name>NFS4ERR_DELEG_ALREADY_WANTED (Error Code10056)" anchor="err_DELEG_ALREADY_WANTED">10056)</name> <t> The client has requested a delegation when it had already registered that it wants that same delegation. </t> </section> <sectiontitle="NFS4ERR_DIRDELEG_UNAVAILanchor="err_DIRDELEG_UNAVAIL" numbered="true" toc="default"> <name>NFS4ERR_DIRDELEG_UNAVAIL (Error Code10084)" anchor="err_DIRDELEG_UNAVAIL">10084)</name> <t> This error is returned when the server is unable or unwilling to provide a requested directory delegation. </t> </section> <sectiontitle="NFS4ERR_RECALLCONFLICTanchor="err_RECALLCONFLICT" numbered="true" toc="default"> <name>NFS4ERR_RECALLCONFLICT (Error Code10061)" anchor="err_RECALLCONFLICT">10061)</name> <t> A recallable object (i.e., a layout or delegation) is unavailable due to a conflicting recall operation that is currently in progress for that object. </t> </section> <sectiontitle="NFS4ERR_REJECT_DELEGanchor="err_REJECT_DELEG" numbered="true" toc="default"> <name>NFS4ERR_REJECT_DELEG (Error Code10085)" anchor="err_REJECT_DELEG">10085)</name> <t> The callback operation invoked to deal with a new delegation has rejected it. </t> </section> </section> <sectiontitle="Attributeanchor="errors_attr" numbered="true" toc="default"> <name>Attribute HandlingErrors" anchor="errors_attr">Errors</name> <t> This section deals with errors specific to attribute handling within NFSv4. </t> <sectiontitle="NFS4ERR_ATTRNOTSUPPanchor="err_ATTRNOTSUPP" numbered="true" toc="default"> <name>NFS4ERR_ATTRNOTSUPP (Error Code10032)" anchor="err_ATTRNOTSUPP">10032)</name> <t> An attribute specified is not supported by the server. This errorMUST NOT<bcp14>MUST NOT</bcp14> be returned by the GETATTR operation. </t> </section> <sectiontitle="NFS4ERR_BADOWNERanchor="err_BADOWNER" numbered="true" toc="default"> <name>NFS4ERR_BADOWNER (Error Code10039)" anchor="err_BADOWNER">10039)</name> <t> This error is returned when an owner or owner_group attribute value or the who field of an ACE within an ACL attribute value cannot be translated to a local representation. </t> </section> <sectiontitle="NFS4ERR_NOT_SAMEanchor="err_NOT_SAME" numbered="true" toc="default"> <name>NFS4ERR_NOT_SAME (Error Code10027)" anchor="err_NOT_SAME">10027)</name> <t> This error is returned by the VERIFY operation to signify that the attributes compared were not the same as those provided in the client's request. </t> </section> <sectiontitle="NFS4ERR_SAMEanchor="err_SAME" numbered="true" toc="default"> <name>NFS4ERR_SAME (Error Code10009)" anchor="err_SAME">10009)</name> <t> This error is returned by the NVERIFY operation to signify that the attributes compared were the same as those provided in the client's request. </t> </section> </section> <sectiontitle="Obsoleted Errors" anchor="errors_obs">anchor="errors_obs" numbered="true" toc="default"> <name>Obsoleted Errors</name> <t> These errorsMUST NOT<bcp14>MUST NOT</bcp14> be generated by any NFSv4.1 operation. This can be for a number of reasons.<list style="symbols"> <t></t> <ul spacing="normal"> <li> The function provided by the error has been superseded by one of the status bits returned by the SEQUENCE operation.</t> <t></li> <li> The new session structure and associated change in locking have made the error unnecessary.</t> <t></li> <li> There has been a restructuring of some errors for NFSv4.1 that resulted in the elimination of certain errors.</t> </list> </t></li> </ul> <sectiontitle="NFS4ERR_BAD_SEQIDanchor="err_BAD_SEQID" numbered="true" toc="default"> <name>NFS4ERR_BAD_SEQID (Error Code10026)" anchor="err_BAD_SEQID">10026)</name> <t> The sequence number (seqid) in a locking request is neither the next expected number or the last number processed. These seqids are ignored in NFSv4.1. </t> </section> <sectiontitle="NFS4ERR_LEASE_MOVEDanchor="err_LEASE_MOVED" numbered="true" toc="default"> <name>NFS4ERR_LEASE_MOVED (Error Code10031)" anchor="err_LEASE_MOVED">10031)</name> <t> A lease being renewed is associated with a file system that has been migrated to a new server. The error has been superseded by the SEQ4_STATUS_LEASE_MOVED status bit (see <xref target="OP_SEQUENCE"/>).format="default"/>). </t> </section> <sectiontitle="NFS4ERR_NXIOanchor="err_NXIO" numbered="true" toc="default"> <name>NFS4ERR_NXIO (Error Code5)" anchor="err_NXIO">5)</name> <t> I/O error. No such device or address. This error is for errors involving block and character device access, but because NFSv4.1 is not a device-access protocol, this error is not applicable. </t> </section> <sectiontitle="NFS4ERR_RESTOREFHanchor="err_RESTOREFH" numbered="true" toc="default"> <name>NFS4ERR_RESTOREFH (Error Code10030)" anchor="err_RESTOREFH">10030)</name> <t> The RESTOREFH operation does not have a saved filehandle (identified by SAVEFH) to operate upon. In NFSv4.1, this error has been superseded by NFS4ERR_NOFILEHANDLE. </t> </section> <sectiontitle="NFS4ERR_STALE_STATEIDanchor="err_STALE_STATEID" numbered="true" toc="default"> <name>NFS4ERR_STALE_STATEID (Error Code10023)" anchor="err_STALE_STATEID">10023)</name> <t> A stateid generated by an earlier server instance was used. This error is moot in NFSv4.1 because all operations that take a stateidMUST<bcp14>MUST</bcp14> be preceded by the SEQUENCE operation, and the earlier server instance is detected by the session infrastructure that supports SEQUENCE. </t> </section> </section> </section><!-- When adding new errors above, add them to the next section under --> <!-- the appropriate operation; the next table for errors to --> <!-- operations is automatically generated. --><sectiontitle="Operationsnumbered="true" toc="default"> <name>Operations and Their ValidErrors">Errors</name> <t> This section contains a table that gives the valid error returns for each protocol operation. The error code NFS4_OK (indicating no error) is not listed but should be understood to be returnable by all operations with two important exceptions:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The operations thatMUST NOT<bcp14>MUST NOT</bcp14> be implemented: OPEN_CONFIRM, RELEASE_LOCKOWNER, RENEW, SETCLIENTID, and SETCLIENTID_CONFIRM.</t> <t></li> <li> The invalid operation: ILLEGAL.</t> </list> </t> <texttable anchor='op_error_returns'> <preamble> Valid</li> </ul> <table anchor="op_error_returns" align="center"> <name>Valid Error Returns for Each ProtocolOperation </preamble> <ttcol align='left'>Operation</ttcol> <ttcol align='left'>Errors</ttcol> <!-- DO NOT MOVE THIS OR THE NEXT LINE - IT MUST BE AT THE START OF TABLE --> <!-- STARTOFTHEERRORTABLE --> <c>ACCESS</c> <c>Operation</name> <thead> <tr> <th align="left">Operation</th> <th align="left">Errors</th> </tr> </thead> <tbody> <tr> <td align="left">ACCESS</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>BACKCHANNEL_CTL</c> <c></td> </tr> <tr> <td align="left">BACKCHANNEL_CTL</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOENT, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>BIND_CONN_TO_SESSION</c> <c></td> </tr> <tr> <td align="left">BIND_CONN_TO_SESSION</td> <td align="left"> NFS4ERR_BADSESSION, NFS4ERR_BADXDR, NFS4ERR_BAD_SESSION_DIGEST, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOT_ONLY_OP, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CLOSE</c> <c></td> </tr> <tr> <td align="left">CLOSE</td> <td align="left"> NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_LOCKS_HELD, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>COMMIT</c> <c></td> </tr> <tr> <td align="left">COMMIT</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_IO, NFS4ERR_ISDIR, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>CREATE</c> <c></td> </tr> <tr> <td align="left">CREATE</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADOWNER, NFS4ERR_BADTYPE, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DQUOT, NFS4ERR_EXIST, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MLINK, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_NOTDIR, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_PERM, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNSAFE_COMPOUND</c> <c /> <c /> <c>CREATE_SESSION</c> <c></td> </tr> <tr> <td align="left">CREATE_SESSION</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_CLID_INUSE, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOENT, NFS4ERR_NOT_ONLY_OP, NFS4ERR_NOSPC, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQ_MISORDERED, NFS4ERR_SERVERFAULT, NFS4ERR_STALE_CLIENTID, NFS4ERR_TOOSMALL, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>DELEGPURGE</c> <c></td> </tr> <tr> <td align="left">DELEGPURGE</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>DELEGRETURN</c> <c></td> </tr> <tr> <td align="left">DELEGRETURN</td> <td align="left"> NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTSUPP, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>DESTROY_CLIENTID</c> <c></td> </tr> <tr> <td align="left">DESTROY_CLIENTID</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_CLIENTID_BUSY, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_NOT_ONLY_OP, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE_CLIENTID, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>DESTROY_SESSION</c> <c></td> </tr> <tr> <td align="left">DESTROY_SESSION</td> <td align="left"> NFS4ERR_BACK_CHAN_BUSY, NFS4ERR_BADSESSION, NFS4ERR_BADXDR, NFS4ERR_CB_PATH_DOWN, NFS4ERR_CONN_NOT_BOUND_TO_SESSION, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_NOT_ONLY_OP, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE_CLIENTID, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>EXCHANGE_ID</c> <c></td> </tr> <tr> <td align="left">EXCHANGE_ID</td> <td align="left"> NFS4ERR_BADCHAR, NFS4ERR_BADXDR, NFS4ERR_CLID_INUSE, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_ENCR_ALG_UNSUPP, NFS4ERR_HASH_ALG_UNSUPP, NFS4ERR_INVAL, NFS4ERR_NOENT, NFS4ERR_NOT_ONLY_OP, NFS4ERR_NOT_SAME, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>FREE_STATEID</c> <c></td> </tr> <tr> <td align="left">FREE_STATEID</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_LOCKS_HELD, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>GET_DIR_DELEGATION</c> <c></td> </tr> <tr> <td align="left">GET_DIR_DELEGATION</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DIRDELEG_UNAVAIL, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>GETATTR</c> <c></td> </tr> <tr> <td align="left">GETATTR</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>GETDEVICEINFO</c> <c></td> </tr> <tr> <td align="left">GETDEVICEINFO</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOENT, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOOSMALL, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE</c> <c /> <c /> <c>GETDEVICELIST</c> <c></td> </tr> <tr> <td align="left">GETDEVICELIST</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_BAD_COOKIE, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTSUPP, NFS4ERR_NOT_SAME, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE</c> <c /> <c /> <c>GETFH</c> <c></td> </tr> <tr> <td align="left">GETFH</td> <td align="left"> NFS4ERR_FHEXPIRED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_STALE</c> <c /> <c /> <c>ILLEGAL</c> <c></td> </tr> <tr> <td align="left">ILLEGAL</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_OP_ILLEGAL</c> <c /> <c /> <c>LAYOUTCOMMIT</c> <c></td> </tr> <tr> <td align="left">LAYOUTCOMMIT</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADIOMODE, NFS4ERR_BADLAYOUT, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_EXPIRED, NFS4ERR_FBIG, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_ISDIR NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTSUPP, NFS4ERR_NO_GRACE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_RECLAIM_BAD, NFS4ERR_RECLAIM_CONFLICT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>LAYOUTGET</c> <c></td> </tr> <tr> <td align="left">LAYOUTGET</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADIOMODE, NFS4ERR_BADLAYOUT, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_DQUOT, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_LAYOUTTRYLATER, NFS4ERR_LAYOUTUNAVAILABLE, NFS4ERR_LOCKED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_NOTSUPP, NFS4ERR_OLD_STATEID, NFS4ERR_OPENMODE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_RECALLCONFLICT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOOSMALL, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>LAYOUTRETURN</c> <c></td> </tr> <tr> <td align="left">LAYOUTRETURN</td> <td align="left"> NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_ISDIR, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTSUPP, NFS4ERR_NO_GRACE, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_CRED, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>LINK</c> <c></td> </tr> <tr> <td align="left">LINK</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DQUOT, NFS4ERR_EXIST, NFS4ERR_FHEXPIRED, NFS4ERR_FILE_OPEN, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_ISDIR, NFS4ERR_IO, NFS4ERR_MLINK, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_NOTDIR, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC, NFS4ERR_WRONG_TYPE, NFS4ERR_XDEV</c> <c /> <c /> <c>LOCK</c> <c></td> </tr> <tr> <td align="left">LOCK</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_RANGE, NFS4ERR_BAD_STATEID, NFS4ERR_DEADLOCK, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DENIED, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_ISDIR, NFS4ERR_LOCK_NOTSUPP, NFS4ERR_LOCK_RANGE, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NO_GRACE, NFS4ERR_OLD_STATEID, NFS4ERR_OPENMODE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_RECLAIM_BAD, NFS4ERR_RECLAIM_CONFLICT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>LOCKT</c> <c></td> </tr> <tr> <td align="left">LOCKT</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_BAD_RANGE, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DENIED, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_ISDIR, NFS4ERR_LOCK_RANGE, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>LOCKU</c> <c></td> </tr> <tr> <td align="left">LOCKU</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_RANGE, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_LOCK_RANGE, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>LOOKUP</c> <c></td> </tr> <tr> <td align="left">LOOKUP</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC</c> <c /> <c /> <c>LOOKUPP</c> <c></td> </tr> <tr> <td align="left">LOOKUPP</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC</c> <c /> <c /> <c>NVERIFY</c> <c></td> </tr> <tr> <td align="left">NVERIFY</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SAME, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>OPEN</c> <c></td> </tr> <tr> <td align="left">OPEN</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADOWNER, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_ALREADY_WANTED, NFS4ERR_DELEG_REVOKED, NFS4ERR_DQUOT, NFS4ERR_EXIST, NFS4ERR_EXPIRED, NFS4ERR_FBIG, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_ISDIR, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_NOTDIR, NFS4ERR_NO_GRACE, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_PERM, NFS4ERR_RECLAIM_BAD, NFS4ERR_RECLAIM_CONFLICT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_SHARE_DENIED, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNSAFE_COMPOUND, NFS4ERR_WRONGSEC, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>OPEN_CONFIRM</c> <c></td> </tr> <tr> <td align="left">OPEN_CONFIRM</td> <td align="left"> NFS4ERR_NOTSUPP</c> <c /> <c /> <c>OPEN_DOWNGRADE</c> <c></td> </tr> <tr> <td align="left">OPEN_DOWNGRADE</td> <td align="left"> NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED</c> <c /> <c /> <c>OPENATTR</c> <c></td> </tr> <tr> <td align="left">OPENATTR</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DQUOT, NFS4ERR_FHEXPIRED, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNSAFE_COMPOUND, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>PUTFH</c> <c></td> </tr> <tr> <td align="left">PUTFH</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_MOVED, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC</c> <c /> <c /> <c>PUTPUBFH</c> <c></td> </tr> <tr> <td align="left">PUTPUBFH</td> <td align="left"> NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC</c> <c /> <c /> <c>PUTROOTFH</c> <c></td> </tr> <tr> <td align="left">PUTROOTFH</td> <td align="left"> NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC</c> <c /> <c /> <c>READ</c> <c></td> </tr> <tr> <td align="left">READ</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_ISDIR, NFS4ERR_IO, NFS4ERR_LOCKED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, NFS4ERR_OPENMODE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_PNFS_IO_HOLE, NFS4ERR_PNFS_NO_LAYOUT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>READDIR</c> <c></td> </tr> <tr> <td align="left">READDIR</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_BAD_COOKIE, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_NOT_SAME, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOOSMALL, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>READLINK</c> <c></td> </tr> <tr> <td align="left">READLINK</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>RECLAIM_COMPLETE</c> <c></td> </tr> <tr> <td align="left">RECLAIM_COMPLETE</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_COMPLETE_ALREADY, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_CRED, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>RELEASE_LOCKOWNER</c> <c></td> </tr> <tr> <td align="left">RELEASE_LOCKOWNER</td> <td align="left"> NFS4ERR_NOTSUPP</c> <c /> <c /> <c>REMOVE</c> <c></td> </tr> <tr> <td align="left">REMOVE</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_FILE_OPEN, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_NOTEMPTY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>RENAME</c> <c></td> </tr> <tr> <td align="left">RENAME</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DQUOT, NFS4ERR_EXIST, NFS4ERR_FHEXPIRED, NFS4ERR_FILE_OPEN, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MLINK, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_NOTDIR, NFS4ERR_NOTEMPTY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC, NFS4ERR_XDEV</c> <c /> <c /> <c>RENEW</c> <c></td> </tr> <tr> <td align="left">RENEW</td> <td align="left"> NFS4ERR_NOTSUPP</c> <c /> <c /> <c>RESTOREFH</c> <c></td> </tr> <tr> <td align="left">RESTOREFH</td> <td align="left"> NFS4ERR_DEADSESSION, NFS4ERR_FHEXPIRED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONGSEC</c> <c /> <c /> <c>SAVEFH</c> <c></td> </tr> <tr> <td align="left">SAVEFH</td> <td align="left"> NFS4ERR_DEADSESSION, NFS4ERR_FHEXPIRED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>SECINFO</c> <c></td> </tr> <tr> <td align="left">SECINFO</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADCHAR, NFS4ERR_BADNAME, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>SECINFO_NO_NAME</c> <c></td> </tr> <tr> <td align="left">SECINFO_NO_NAME</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, NFS4ERR_MOVED, NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>SEQUENCE</c> <c></td> </tr> <tr> <td align="left">SEQUENCE</td> <td align="left"> NFS4ERR_BADSESSION, NFS4ERR_BADSLOT, NFS4ERR_BADXDR, NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_CONN_NOT_BOUND_TO_SESSION, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQUENCE_POS, NFS4ERR_SEQ_FALSE_RETRY, NFS4ERR_SEQ_MISORDERED, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>SET_SSV</c> <c></td> </tr> <tr> <td align="left">SET_SSV</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_BAD_SESSION_DIGEST, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>SETATTR</c> <c></td> </tr> <tr> <td align="left">SETATTR</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, NFS4ERR_BADOWNER, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_DQUOT, NFS4ERR_EXPIRED, NFS4ERR_FBIG, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_LOCKED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_OLD_STATEID, NFS4ERR_OPENMODE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_PERM, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>SETCLIENTID</c> <c></td> </tr> <tr> <td align="left">SETCLIENTID</td> <td align="left"> NFS4ERR_NOTSUPP</c> <c /> <c /> <c>SETCLIENTID_CONFIRM</c> <c></td> </tr> <tr> <td align="left">SETCLIENTID_CONFIRM</td> <td align="left"> NFS4ERR_NOTSUPP</c> <c /> <c /> <c>TEST_STATEID</c> <c></td> </tr> <tr> <td align="left">TEST_STATEID</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>VERIFY</c> <c></td> </tr> <tr> <td align="left">VERIFY</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOT_SAME, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>WANT_DELEGATION</c> <c></td> </tr> <tr> <td align="left">WANT_DELEGATION</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_ALREADY_WANTED, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTSUPP, NFS4ERR_NO_GRACE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_RECALLCONFLICT, NFS4ERR_RECLAIM_BAD, NFS4ERR_RECLAIM_CONFLICT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>WRITE</c> <c></td> </tr> <tr> <td align="left">WRITE</td> <td align="left"> NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DEADSESSION, NFS4ERR_DELAY, NFS4ERR_DELEG_REVOKED, NFS4ERR_DQUOT, NFS4ERR_EXPIRED, NFS4ERR_FBIG, NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_ISDIR, NFS4ERR_LOCKED, NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, NFS4ERR_OLD_STATEID, NFS4ERR_OPENMODE, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_PNFS_IO_HOLE, NFS4ERR_PNFS_NO_LAYOUT, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, NFS4ERR_STALE, NFS4ERR_SYMLINK, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <!-- ENDOFTHEERRORTABLE --> <!-- DO NOT MOVE THIS OR THE ONE ABOVE LINE - IT MUST BE AT THE START OF TABLE --> </texttable></td> </tr> </tbody> </table> </section><!-- When adding new errors above, add them to the next section under --> <!-- the appropriate operation; the next table for errors to --> <!-- operations is automatically generated. --><sectiontitle="Callbacknumbered="true" toc="default"> <name>Callback Operations and Their ValidErrors">Errors</name> <t> This section contains a table that gives the valid error returns for each callback operation. The error code NFS4_OK (indicating no error) is not listed but should be understood to be returnable by all callback operations with the exception of CB_ILLEGAL. </t><texttable anchor='cb_op_error_returns'> <preamble> Valid<table anchor="cb_op_error_returns" align="center"> <name>Valid Error Returns for Each Protocol CallbackOperation </preamble> <ttcol align='left'>Callback Operation</ttcol> <ttcol align='left'>Errors</ttcol> <!-- DO NOT MOVE THIS OR THE NEXT LINE - IT MUST BE AT THE START OF TABLE --> <!-- STARTOFTHEERRORTABLE --> <c>CB_GETATTR</c> <c>Operation</name> <thead> <tr> <th align="left">Callback Operation</th> <th align="left">Errors</th> </tr> </thead> <tbody> <tr> <td align="left">CB_GETATTR</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS,</c> <c /> <c /> <c>CB_ILLEGAL</c> <c></td> </tr> <tr> <td align="left">CB_ILLEGAL</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_OP_ILLEGAL</c> <c /> <c /> <c>CB_LAYOUTRECALL</c> <c></td> </tr> <tr> <td align="left">CB_LAYOUTRECALL</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADIOMODE, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOMATCHING_LAYOUT, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_TOO_MANY_OPS, NFS4ERR_UNKNOWN_LAYOUTTYPE, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>CB_NOTIFY</c> <c></td> </tr> <tr> <td align="left">CB_NOTIFY</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_NOTIFY_DEVICEID</c> <c></td> </tr> <tr> <td align="left">CB_NOTIFY_DEVICEID</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_NOTIFY_LOCK</c> <c></td> </tr> <tr> <td align="left">CB_NOTIFY_LOCK</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DELAY, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_PUSH_DELEG</c> <c></td> </tr> <tr> <td align="left">CB_PUSH_DELEG</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REJECT_DELEG, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS, NFS4ERR_WRONG_TYPE</c> <c /> <c /> <c>CB_RECALL</c> <c></td> </tr> <tr> <td align="left">CB_RECALL</td> <td align="left"> NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_BAD_STATEID, NFS4ERR_DELAY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_RECALL_ANY</c> <c></td> </tr> <tr> <td align="left">CB_RECALL_ANY</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_RECALLABLE_OBJ_AVAIL</c> <c></td> </tr> <tr> <td align="left">CB_RECALLABLE_OBJ_AVAIL</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_INVAL, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_RECALL_SLOT</c> <c></td> </tr> <tr> <td align="left">CB_RECALL_SLOT</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_DELAY, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_SEQUENCE</c> <c></td> </tr> <tr> <td align="left">CB_SEQUENCE</td> <td align="left"> NFS4ERR_BADSESSION, NFS4ERR_BADSLOT, NFS4ERR_BADXDR, NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_CONN_NOT_BOUND_TO_SESSION, NFS4ERR_DELAY, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQUENCE_POS, NFS4ERR_SEQ_FALSE_RETRY, NFS4ERR_SEQ_MISORDERED, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <c>CB_WANTS_CANCELLED</c> <c></td> </tr> <tr> <td align="left">CB_WANTS_CANCELLED</td> <td align="left"> NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_NOTSUPP, NFS4ERR_OP_NOT_IN_SESSION, NFS4ERR_REP_TOO_BIG, NFS4ERR_REP_TOO_BIG_TO_CACHE, NFS4ERR_REQ_TOO_BIG, NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SERVERFAULT, NFS4ERR_TOO_MANY_OPS</c> <c /> <c /> <!-- ENDOFTHEERRORTABLE --> <!-- DO NOT MOVE THIS OR THE ONE ABOVE LINE - IT MUST BE AT THE START OF TABLE --> </texttable></td> </tr> </tbody> </table> </section><!-- INCLUDE THE AUTO GENERATED ERROR TO OP TABLE --><sectiontitle="Errorsnumbered="true" toc="default"> <name>Errors and the Operations That Use Them</name> <table anchor="error_op_returns" align="center"> <name>Errors and the Operations That UseThem"> <texttable anchor='error_op_returns'> <ttcol align='left'>Error</ttcol> <ttcol align='left'>Operations</ttcol> <c>NFS4ERR_ACCESS</c> <c>Them</name> <thead> <tr> <th align="left">Error</th> <th align="left">Operations</th> </tr> </thead> <tbody> <tr> <td align="left">NFS4ERR_ACCESS</td> <td align="left"> ACCESS, COMMIT, CREATE, GETATTR, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, READ, READDIR, READLINK, REMOVE, RENAME, SECINFO, SECINFO_NO_NAME, SETATTR, VERIFY, WRITE</c> <c /> <c /> <c>NFS4ERR_ADMIN_REVOKED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_ADMIN_REVOKED</td> <td align="left"> CLOSE, DELEGRETURN, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LOCK, LOCKU, OPEN, OPEN_DOWNGRADE, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_ATTRNOTSUPP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_ATTRNOTSUPP</td> <td align="left"> CREATE, LAYOUTCOMMIT, NVERIFY, OPEN, SETATTR, VERIFY</c> <c /> <c /> <c>NFS4ERR_BACK_CHAN_BUSY</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BACK_CHAN_BUSY</td> <td align="left"> DESTROY_SESSION</c> <c /> <c /> <c>NFS4ERR_BADCHAR</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADCHAR</td> <td align="left"> CREATE, EXCHANGE_ID, LINK, LOOKUP, NVERIFY, OPEN, REMOVE, RENAME, SECINFO, SETATTR, VERIFY</c> <c /> <c /> <c>NFS4ERR_BADHANDLE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADHANDLE</td> <td align="left"> CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, PUTFH</c> <c /> <c /> <c>NFS4ERR_BADIOMODE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADIOMODE</td> <td align="left"> CB_LAYOUTRECALL, LAYOUTCOMMIT, LAYOUTGET</c> <c /> <c /> <c>NFS4ERR_BADLAYOUT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADLAYOUT</td> <td align="left"> LAYOUTCOMMIT, LAYOUTGET</c> <c /> <c /> <c>NFS4ERR_BADNAME</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADNAME</td> <td align="left"> CREATE, LINK, LOOKUP, OPEN, REMOVE, RENAME, SECINFO</c> <c /> <c /> <c>NFS4ERR_BADOWNER</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADOWNER</td> <td align="left"> CREATE, OPEN, SETATTR</c> <c /> <c /> <c>NFS4ERR_BADSESSION</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADSESSION</td> <td align="left"> BIND_CONN_TO_SESSION, CB_SEQUENCE, DESTROY_SESSION, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_BADSLOT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADSLOT</td> <td align="left"> CB_SEQUENCE, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_BADTYPE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADTYPE</td> <td align="left"> CREATE</c> <c /> <c /> <c>NFS4ERR_BADXDR</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BADXDR</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_ILLEGAL, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, ILLEGAL, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, READ, READDIR, RECLAIM_COMPLETE, REMOVE, RENAME, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_BAD_COOKIE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BAD_COOKIE</td> <td align="left"> GETDEVICELIST, READDIR</c> <c /> <c /> <c>NFS4ERR_BAD_HIGH_SLOT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BAD_HIGH_SLOT</td> <td align="left"> CB_RECALL_SLOT, CB_SEQUENCE, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_BAD_RANGE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BAD_RANGE</td> <td align="left"> LOCK, LOCKT, LOCKU</c> <c /> <c /> <c>NFS4ERR_BAD_SESSION_DIGEST</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BAD_SESSION_DIGEST</td> <td align="left"> BIND_CONN_TO_SESSION, SET_SSV</c> <c /> <c /> <c>NFS4ERR_BAD_STATEID</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_BAD_STATEID</td> <td align="left"> CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_LOCK, CB_RECALL, CLOSE, DELEGRETURN, FREE_STATEID, LAYOUTGET, LAYOUTRETURN, LOCK, LOCKU, OPEN, OPEN_DOWNGRADE, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_CB_PATH_DOWN</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_CB_PATH_DOWN</td> <td align="left"> DESTROY_SESSION</c> <c /> <c /> <c>NFS4ERR_CLID_INUSE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_CLID_INUSE</td> <td align="left"> CREATE_SESSION, EXCHANGE_ID</c> <c /> <c /> <c>NFS4ERR_CLIENTID_BUSY</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_CLIENTID_BUSY</td> <td align="left"> DESTROY_CLIENTID</c> <c /> <c /> <c>NFS4ERR_COMPLETE_ALREADY</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_COMPLETE_ALREADY</td> <td align="left"> RECLAIM_COMPLETE</c> <c /> <c /> <c>NFS4ERR_CONN_NOT_BOUND_TO_SESSION</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_CONN_NOT_BOUND_TO_SESSION</td> <td align="left"> CB_SEQUENCE, DESTROY_SESSION, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_DEADLOCK</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DEADLOCK</td> <td align="left"> LOCK</c> <c /> <c /> <c>NFS4ERR_DEADSESSION</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DEADSESSION</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_DELAY</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DELAY</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_DELEG_ALREADY_WANTED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DELEG_ALREADY_WANTED</td> <td align="left"> OPEN, WANT_DELEGATION</c> <c /> <c /> <c>NFS4ERR_DELEG_REVOKED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DELEG_REVOKED</td> <td align="left"> DELEGRETURN, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, OPEN, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_DENIED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DENIED</td> <td align="left"> LOCK, LOCKT</c> <c /> <c /> <c>NFS4ERR_DIRDELEG_UNAVAIL</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DIRDELEG_UNAVAIL</td> <td align="left"> GET_DIR_DELEGATION</c> <c /> <c /> <c>NFS4ERR_DQUOT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_DQUOT</td> <td align="left"> CREATE, LAYOUTGET, LINK, OPEN, OPENATTR, RENAME, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_ENCR_ALG_UNSUPP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_ENCR_ALG_UNSUPP</td> <td align="left"> EXCHANGE_ID</c> <c /> <c /> <c>NFS4ERR_EXIST</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_EXIST</td> <td align="left"> CREATE, LINK, OPEN, RENAME</c> <c /> <c /> <c>NFS4ERR_EXPIRED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_EXPIRED</td> <td align="left"> CLOSE, DELEGRETURN, LAYOUTCOMMIT, LAYOUTRETURN, LOCK, LOCKU, OPEN, OPEN_DOWNGRADE, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_FBIG</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_FBIG</td> <td align="left"> LAYOUTCOMMIT, OPEN, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_FHEXPIRED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_FHEXPIRED</td> <td align="left"> ACCESS, CLOSE, COMMIT, CREATE, DELEGRETURN, GETATTR, GETDEVICELIST, GETFH, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_FILE_OPEN</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_FILE_OPEN</td> <td align="left"> LINK, REMOVE, RENAME</c> <c /> <c /> <c>NFS4ERR_GRACE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_GRACE</td> <td align="left"> GETATTR, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, NVERIFY, OPEN, READ, REMOVE, RENAME, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_HASH_ALG_UNSUPP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_HASH_ALG_UNSUPP</td> <td align="left"> EXCHANGE_ID</c> <c /> <c /> <c>NFS4ERR_INVAL</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_INVAL</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_PUSH_DELEG, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CREATE, CREATE_SESSION, DELEGRETURN, EXCHANGE_ID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, NVERIFY, OPEN, OPEN_DOWNGRADE, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, SECINFO, SECINFO_NO_NAME, SETATTR, SET_SSV, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_IO</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_IO</td> <td align="left"> ACCESS, COMMIT, CREATE, GETATTR, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LINK, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, READ, READDIR, READLINK, REMOVE, RENAME, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_ISDIR</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_ISDIR</td> <td align="left"> COMMIT, LAYOUTCOMMIT, LAYOUTRETURN, LINK, LOCK, LOCKT, OPEN, READ, WRITE</c> <c /> <c /> <c>NFS4ERR_LAYOUTTRYLATER</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_LAYOUTTRYLATER</td> <td align="left"> LAYOUTGET</c> <c /> <c /> <c>NFS4ERR_LAYOUTUNAVAILABLE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_LAYOUTUNAVAILABLE</td> <td align="left"> LAYOUTGET</c> <c /> <c /> <c>NFS4ERR_LOCKED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_LOCKED</td> <td align="left"> LAYOUTGET, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_LOCKS_HELD</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_LOCKS_HELD</td> <td align="left"> CLOSE, FREE_STATEID</c> <c /> <c /> <c>NFS4ERR_LOCK_NOTSUPP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_LOCK_NOTSUPP</td> <td align="left"> LOCK</c> <c /> <c /> <c>NFS4ERR_LOCK_RANGE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_LOCK_RANGE</td> <td align="left"> LOCK, LOCKT, LOCKU</c> <c /> <c /> <c>NFS4ERR_MLINK</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_MLINK</td> <td align="left"> CREATE, LINK, RENAME</c> <c /> <c /> <c>NFS4ERR_MOVED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_MOVED</td> <td align="left"> ACCESS, CLOSE, COMMIT, CREATE, DELEGRETURN, GETATTR, GETFH, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_NAMETOOLONG</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NAMETOOLONG</td> <td align="left"> CREATE, LINK, LOOKUP, OPEN, REMOVE, RENAME, SECINFO</c> <c /> <c /> <c>NFS4ERR_NOENT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOENT</td> <td align="left"> BACKCHANNEL_CTL, CREATE_SESSION, EXCHANGE_ID, GETDEVICEINFO, LOOKUP, LOOKUPP, OPEN, OPENATTR, REMOVE, RENAME, SECINFO, SECINFO_NO_NAME</c> <c /> <c /> <c>NFS4ERR_NOFILEHANDLE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOFILEHANDLE</td> <td align="left"> ACCESS, CLOSE, COMMIT, CREATE, DELEGRETURN, GETATTR, GETDEVICELIST, GETFH, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_NOMATCHING_LAYOUT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOMATCHING_LAYOUT</td> <td align="left"> CB_LAYOUTRECALL</c> <c /> <c /> <c>NFS4ERR_NOSPC</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOSPC</td> <td align="left"> CREATE, CREATE_SESSION, LAYOUTGET, LINK, OPEN, OPENATTR, RENAME, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_NOTDIR</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOTDIR</td> <td align="left"> CREATE, GET_DIR_DELEGATION, LINK, LOOKUP, LOOKUPP, OPEN, READDIR, REMOVE, RENAME, SECINFO, SECINFO_NO_NAME</c> <c /> <c /> <c>NFS4ERR_NOTEMPTY</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOTEMPTY</td> <td align="left"> REMOVE, RENAME</c> <c /> <c /> <c>NFS4ERR_NOTSUPP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOTSUPP</td> <td align="left"> CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALLABLE_OBJ_AVAIL, CB_WANTS_CANCELLED, DELEGPURGE, DELEGRETURN, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, OPENATTR, OPEN_CONFIRM, RELEASE_LOCKOWNER, RENEW, SECINFO_NO_NAME, SETCLIENTID, SETCLIENTID_CONFIRM, WANT_DELEGATION</c> <c /> <c /> <c>NFS4ERR_NOT_ONLY_OP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOT_ONLY_OP</td> <td align="left"> BIND_CONN_TO_SESSION, CREATE_SESSION, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID</c> <c /> <c /> <c>NFS4ERR_NOT_SAME</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NOT_SAME</td> <td align="left"> EXCHANGE_ID, GETDEVICELIST, READDIR, VERIFY</c> <c /> <c /> <c>NFS4ERR_NO_GRACE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_NO_GRACE</td> <td align="left"> LAYOUTCOMMIT, LAYOUTRETURN, LOCK, OPEN, WANT_DELEGATION</c> <c /> <c /> <c>NFS4ERR_OLD_STATEID</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_OLD_STATEID</td> <td align="left"> CLOSE, DELEGRETURN, FREE_STATEID, LAYOUTGET, LAYOUTRETURN, LOCK, LOCKU, OPEN, OPEN_DOWNGRADE, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_OPENMODE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_OPENMODE</td> <td align="left"> LAYOUTGET, LOCK, READ, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_OP_ILLEGAL</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_OP_ILLEGAL</td> <td align="left"> CB_ILLEGAL, ILLEGAL</c> <c /> <c /> <c>NFS4ERR_OP_NOT_IN_SESSION</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_OP_NOT_IN_SESSION</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, DELEGPURGE, DELEGRETURN, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GETFH, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_PERM</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_PERM</td> <td align="left"> CREATE, OPEN, SETATTR</c> <c /> <c /> <c>NFS4ERR_PNFS_IO_HOLE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_PNFS_IO_HOLE</td> <td align="left"> READ, WRITE</c> <c /> <c /> <c>NFS4ERR_PNFS_NO_LAYOUT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_PNFS_NO_LAYOUT</td> <td align="left"> READ, WRITE</c> <c /> <c /> <c>NFS4ERR_RECALLCONFLICT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_RECALLCONFLICT</td> <td align="left"> LAYOUTGET, WANT_DELEGATION</c> <c /> <c /> <c>NFS4ERR_RECLAIM_BAD</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_RECLAIM_BAD</td> <td align="left"> LAYOUTCOMMIT, LOCK, OPEN, WANT_DELEGATION</c> <c /> <c /> <c>NFS4ERR_RECLAIM_CONFLICT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_RECLAIM_CONFLICT</td> <td align="left"> LAYOUTCOMMIT, LOCK, OPEN, WANT_DELEGATION</c> <c /> <c /> <c>NFS4ERR_REJECT_DELEG</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_REJECT_DELEG</td> <td align="left"> CB_PUSH_DELEG</c> <c /> <c /> <c>NFS4ERR_REP_TOO_BIG</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_REP_TOO_BIG_TO_CACHE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG_TO_CACHE</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_REQ_TOO_BIG</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_REQ_TOO_BIG</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_RETRY_UNCACHED_REP</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_RETRY_UNCACHED_REP</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_ROFS</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_ROFS</td> <td align="left"> CREATE, LINK, LOCK, LOCKT, OPEN, OPENATTR, OPEN_DOWNGRADE, REMOVE, RENAME, SETATTR, WRITE</c> <c /> <c /> <c>NFS4ERR_SAME</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SAME</td> <td align="left"> NVERIFY</c> <c /> <c /> <c>NFS4ERR_SEQUENCE_POS</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SEQUENCE_POS</td> <td align="left"> CB_SEQUENCE, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_SEQ_FALSE_RETRY</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SEQ_FALSE_RETRY</td> <td align="left"> CB_SEQUENCE, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_SEQ_MISORDERED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SEQ_MISORDERED</td> <td align="left"> CB_SEQUENCE, CREATE_SESSION, SEQUENCE</c> <c /> <c /> <c>NFS4ERR_SERVERFAULT</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SERVERFAULT</td> <td align="left"> ACCESS, BIND_CONN_TO_SESSION, CB_GETATTR, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SETATTR, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_SHARE_DENIED</c> <c> OPEN </c> <c /> <c /> <c>NFS4ERR_STALE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SHARE_DENIED</td> <td align="left"> OPEN </td> </tr> <tr> <td align="left">NFS4ERR_STALE</td> <td align="left"> ACCESS, CLOSE, COMMIT, CREATE, DELEGRETURN, GETATTR, GETFH, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_STALE_CLIENTID</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_STALE_CLIENTID</td> <td align="left"> CREATE_SESSION, DESTROY_CLIENTID, DESTROY_SESSION</c> <c /> <c /> <c>NFS4ERR_SYMLINK</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_SYMLINK</td> <td align="left"> COMMIT, LAYOUTCOMMIT, LINK, LOCK, LOCKT, LOOKUP, LOOKUPP, OPEN, READ, WRITE</c> <c /> <c /> <c>NFS4ERR_TOOSMALL</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_TOOSMALL</td> <td align="left"> CREATE_SESSION, GETDEVICEINFO, LAYOUTGET, READDIR</c> <c /> <c /> <c>NFS4ERR_TOO_MANY_OPS</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_TOO_MANY_OPS</td> <td align="left"> ACCESS, BACKCHANNEL_CTL, BIND_CONN_TO_SESSION, CB_GETATTR, CB_LAYOUTRECALL, CB_NOTIFY, CB_NOTIFY_DEVICEID, CB_NOTIFY_LOCK, CB_PUSH_DELEG, CB_RECALL, CB_RECALLABLE_OBJ_AVAIL, CB_RECALL_ANY, CB_RECALL_SLOT, CB_SEQUENCE, CB_WANTS_CANCELLED, CLOSE, COMMIT, CREATE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID, FREE_STATEID, GETATTR, GETDEVICEINFO, GETDEVICELIST, GET_DIR_DELEGATION, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, OPENATTR, OPEN_DOWNGRADE, PUTFH, PUTPUBFH, PUTROOTFH, READ, READDIR, READLINK, RECLAIM_COMPLETE, REMOVE, RENAME, RESTOREFH, SAVEFH, SECINFO, SECINFO_NO_NAME, SEQUENCE, SETATTR, SET_SSV, TEST_STATEID, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_UNKNOWN_LAYOUTTYPE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_UNKNOWN_LAYOUTTYPE</td> <td align="left"> CB_LAYOUTRECALL, GETDEVICEINFO, GETDEVICELIST, LAYOUTCOMMIT, LAYOUTGET, LAYOUTRETURN, NVERIFY, SETATTR, VERIFY</c> <c /> <c /> <c>NFS4ERR_UNSAFE_COMPOUND</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_UNSAFE_COMPOUND</td> <td align="left"> CREATE, OPEN, OPENATTR</c> <c /> <c /> <c>NFS4ERR_WRONGSEC</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_WRONGSEC</td> <td align="left"> LINK, LOOKUP, LOOKUPP, OPEN, PUTFH, PUTPUBFH, PUTROOTFH, RENAME, RESTOREFH</c> <c /> <c /> <c>NFS4ERR_WRONG_CRED</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_WRONG_CRED</td> <td align="left"> CLOSE, CREATE_SESSION, DELEGPURGE, DELEGRETURN, DESTROY_CLIENTID, DESTROY_SESSION, FREE_STATEID, LAYOUTCOMMIT, LAYOUTRETURN, LOCK, LOCKT, LOCKU, OPEN_DOWNGRADE, RECLAIM_COMPLETE</c> <c /> <c /> <c>NFS4ERR_WRONG_TYPE</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_WRONG_TYPE</td> <td align="left"> CB_LAYOUTRECALL, CB_PUSH_DELEG, COMMIT, GETATTR, LAYOUTGET, LAYOUTRETURN, LINK, LOCK, LOCKT, NVERIFY, OPEN, OPENATTR, READ, READLINK, RECLAIM_COMPLETE, SETATTR, VERIFY, WANT_DELEGATION, WRITE</c> <c /> <c /> <c>NFS4ERR_XDEV</c> <c></td> </tr> <tr> <td align="left">NFS4ERR_XDEV</td> <td align="left"> LINK, RENAME</c> <c /> <c /> </texttable></td> </tr> </tbody> </table> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="nfsv41procedures"title="NFSv4.1 Procedures">numbered="true" toc="default"> <name>NFSv4.1 Procedures</name> <t> Both procedures, NULL and COMPOUND,MUST<bcp14>MUST</bcp14> be implemented. </t><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="PROC_NULL"title="Procedurenumbered="true" toc="default"> <name>Procedure 0: NULL - NoOperation" >Operation</name> <section toc="exclude" anchor="PROC_NULL_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork> void; </artwork> </figure>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ void;]]></sourcecode> </section> <section toc="exclude" anchor="PROC_NULL_RESULTS"title="RESULTS"> <figure> <artwork> void; </artwork> </figure>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ void;]]></sourcecode> </section> <section toc="exclude" anchor="PROC_NULL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This is the standard NULL procedure with the standard void argument and void response. This procedure has no functionality associated with it. Because of this, it is sometimes used to measure the overhead of processing a service request. Therefore, the serverSHOULD<bcp14>SHOULD</bcp14> ensure that no unnecessary work is done in servicing this procedure. </t> </section> <section toc="exclude" anchor="PROC_NULL_ERRORS"title="ERRORS">numbered="true"> <name>ERRORS</name> <t> None. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_COMPOUND"title="Procedurenumbered="true" toc="default"> <name>Procedure 1: COMPOUND - CompoundOperations" >Operations</name> <section toc="exclude" anchor="OP_COMPOUND_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ enum nfs_opnum4 { OP_ACCESS = 3, OP_CLOSE = 4, OP_COMMIT = 5, OP_CREATE = 6, OP_DELEGPURGE = 7, OP_DELEGRETURN = 8, OP_GETATTR = 9, OP_GETFH = 10, OP_LINK = 11, OP_LOCK = 12, OP_LOCKT = 13, OP_LOCKU = 14, OP_LOOKUP = 15, OP_LOOKUPP = 16, OP_NVERIFY = 17, OP_OPEN = 18, OP_OPENATTR = 19, OP_OPEN_CONFIRM = 20, /* Mandatory not-to-implement */ OP_OPEN_DOWNGRADE = 21, OP_PUTFH = 22, OP_PUTPUBFH = 23, OP_PUTROOTFH = 24, OP_READ = 25, OP_READDIR = 26, OP_READLINK = 27, OP_REMOVE = 28, OP_RENAME = 29, OP_RENEW = 30, /* Mandatory not-to-implement */ OP_RESTOREFH = 31, OP_SAVEFH = 32, OP_SECINFO = 33, OP_SETATTR = 34, OP_SETCLIENTID = 35, /* Mandatory not-to-implement */ OP_SETCLIENTID_CONFIRM = 36, /* Mandatory not-to-implement */ OP_VERIFY = 37, OP_WRITE = 38, OP_RELEASE_LOCKOWNER = 39, /* Mandatory not-to-implement */ /* new operations for NFSv4.1 */ OP_BACKCHANNEL_CTL = 40, OP_BIND_CONN_TO_SESSION = 41, OP_EXCHANGE_ID = 42, OP_CREATE_SESSION = 43, OP_DESTROY_SESSION = 44, OP_FREE_STATEID = 45, OP_GET_DIR_DELEGATION = 46, OP_GETDEVICEINFO = 47, OP_GETDEVICELIST = 48, OP_LAYOUTCOMMIT = 49, OP_LAYOUTGET = 50, OP_LAYOUTRETURN = 51, OP_SECINFO_NO_NAME = 52, OP_SEQUENCE = 53, OP_SET_SSV = 54, OP_TEST_STATEID = 55, OP_WANT_DELEGATION = 56, OP_DESTROY_CLIENTID = 57, OP_RECLAIM_COMPLETE = 58, OP_ILLEGAL = 10044 };</artwork> </figure> <figure> <artwork>union nfs_argop4 switch (nfs_opnum4 argop) { case OP_ACCESS: ACCESS4args opaccess; case OP_CLOSE: CLOSE4args opclose; case OP_COMMIT: COMMIT4args opcommit; case OP_CREATE: CREATE4args opcreate; case OP_DELEGPURGE: DELEGPURGE4args opdelegpurge; case OP_DELEGRETURN: DELEGRETURN4args opdelegreturn; case OP_GETATTR: GETATTR4args opgetattr; case OP_GETFH: void; case OP_LINK: LINK4args oplink; case OP_LOCK: LOCK4args oplock; case OP_LOCKT: LOCKT4args oplockt; case OP_LOCKU: LOCKU4args oplocku; case OP_LOOKUP: LOOKUP4args oplookup; case OP_LOOKUPP: void; case OP_NVERIFY: NVERIFY4args opnverify; case OP_OPEN: OPEN4args opopen; case OP_OPENATTR: OPENATTR4args opopenattr; /* Not for NFSv4.1 */ case OP_OPEN_CONFIRM: OPEN_CONFIRM4args opopen_confirm; case OP_OPEN_DOWNGRADE: OPEN_DOWNGRADE4args opopen_downgrade; case OP_PUTFH: PUTFH4args opputfh; case OP_PUTPUBFH: void; case OP_PUTROOTFH: void; case OP_READ: READ4args opread; case OP_READDIR: READDIR4args opreaddir; case OP_READLINK: void; case OP_REMOVE: REMOVE4args opremove; case OP_RENAME: RENAME4args oprename; /* Not for NFSv4.1 */ case OP_RENEW: RENEW4args oprenew; case OP_RESTOREFH: void; case OP_SAVEFH: void; case OP_SECINFO: SECINFO4args opsecinfo; case OP_SETATTR: SETATTR4args opsetattr; /* Not for NFSv4.1 */ case OP_SETCLIENTID: SETCLIENTID4args opsetclientid; /* Not for NFSv4.1 */ case OP_SETCLIENTID_CONFIRM: SETCLIENTID_CONFIRM4args opsetclientid_confirm; case OP_VERIFY: VERIFY4args opverify; case OP_WRITE: WRITE4args opwrite; /* Not for NFSv4.1 */ case OP_RELEASE_LOCKOWNER: RELEASE_LOCKOWNER4args oprelease_lockowner; /* Operations new to NFSv4.1 */ case OP_BACKCHANNEL_CTL: BACKCHANNEL_CTL4args opbackchannel_ctl; case OP_BIND_CONN_TO_SESSION: BIND_CONN_TO_SESSION4args opbind_conn_to_session; case OP_EXCHANGE_ID: EXCHANGE_ID4args opexchange_id; case OP_CREATE_SESSION: CREATE_SESSION4args opcreate_session; case OP_DESTROY_SESSION: DESTROY_SESSION4args opdestroy_session; case OP_FREE_STATEID: FREE_STATEID4args opfree_stateid; case OP_GET_DIR_DELEGATION: GET_DIR_DELEGATION4args opget_dir_delegation; case OP_GETDEVICEINFO: GETDEVICEINFO4args opgetdeviceinfo; case OP_GETDEVICELIST: GETDEVICELIST4args opgetdevicelist; case OP_LAYOUTCOMMIT: LAYOUTCOMMIT4args oplayoutcommit; case OP_LAYOUTGET: LAYOUTGET4args oplayoutget; case OP_LAYOUTRETURN: LAYOUTRETURN4args oplayoutreturn; case OP_SECINFO_NO_NAME: SECINFO_NO_NAME4args opsecinfo_no_name; case OP_SEQUENCE: SEQUENCE4args opsequence; case OP_SET_SSV: SET_SSV4args opset_ssv; case OP_TEST_STATEID: TEST_STATEID4args optest_stateid; case OP_WANT_DELEGATION: WANT_DELEGATION4args opwant_delegation; case OP_DESTROY_CLIENTID: DESTROY_CLIENTID4args opdestroy_clientid; case OP_RECLAIM_COMPLETE: RECLAIM_COMPLETE4args opreclaim_complete; /* Operations not new to NFSv4.1 */ case OP_ILLEGAL: void; };</artwork> </figure> <figure> <artwork>struct COMPOUND4args { utf8str_cs tag; uint32_t minorversion; nfs_argop4argarray<>;argarray<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_COMPOUND_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ union nfs_resop4 switch (nfs_opnum4 resop) { case OP_ACCESS: ACCESS4res opaccess; case OP_CLOSE: CLOSE4res opclose; case OP_COMMIT: COMMIT4res opcommit; case OP_CREATE: CREATE4res opcreate; case OP_DELEGPURGE: DELEGPURGE4res opdelegpurge; case OP_DELEGRETURN: DELEGRETURN4res opdelegreturn; case OP_GETATTR: GETATTR4res opgetattr; case OP_GETFH: GETFH4res opgetfh; case OP_LINK: LINK4res oplink; case OP_LOCK: LOCK4res oplock; case OP_LOCKT: LOCKT4res oplockt; case OP_LOCKU: LOCKU4res oplocku; case OP_LOOKUP: LOOKUP4res oplookup; case OP_LOOKUPP: LOOKUPP4res oplookupp; case OP_NVERIFY: NVERIFY4res opnverify; case OP_OPEN: OPEN4res opopen; case OP_OPENATTR: OPENATTR4res opopenattr; /* Not for NFSv4.1 */ case OP_OPEN_CONFIRM: OPEN_CONFIRM4res opopen_confirm; case OP_OPEN_DOWNGRADE: OPEN_DOWNGRADE4res opopen_downgrade; case OP_PUTFH: PUTFH4res opputfh; case OP_PUTPUBFH: PUTPUBFH4res opputpubfh; case OP_PUTROOTFH: PUTROOTFH4res opputrootfh; case OP_READ: READ4res opread; case OP_READDIR: READDIR4res opreaddir; case OP_READLINK: READLINK4res opreadlink; case OP_REMOVE: REMOVE4res opremove; case OP_RENAME: RENAME4res oprename; /* Not for NFSv4.1 */ case OP_RENEW: RENEW4res oprenew; case OP_RESTOREFH: RESTOREFH4res oprestorefh; case OP_SAVEFH: SAVEFH4res opsavefh; case OP_SECINFO: SECINFO4res opsecinfo; case OP_SETATTR: SETATTR4res opsetattr; /* Not for NFSv4.1 */ case OP_SETCLIENTID: SETCLIENTID4res opsetclientid; /* Not for NFSv4.1 */ case OP_SETCLIENTID_CONFIRM: SETCLIENTID_CONFIRM4res opsetclientid_confirm; case OP_VERIFY: VERIFY4res opverify; case OP_WRITE: WRITE4res opwrite; /* Not for NFSv4.1 */ case OP_RELEASE_LOCKOWNER: RELEASE_LOCKOWNER4res oprelease_lockowner; /* Operations new to NFSv4.1 */ case OP_BACKCHANNEL_CTL: BACKCHANNEL_CTL4res opbackchannel_ctl; case OP_BIND_CONN_TO_SESSION: BIND_CONN_TO_SESSION4res opbind_conn_to_session; case OP_EXCHANGE_ID: EXCHANGE_ID4res opexchange_id; case OP_CREATE_SESSION: CREATE_SESSION4res opcreate_session; case OP_DESTROY_SESSION: DESTROY_SESSION4res opdestroy_session; case OP_FREE_STATEID: FREE_STATEID4res opfree_stateid; case OP_GET_DIR_DELEGATION: GET_DIR_DELEGATION4res opget_dir_delegation; case OP_GETDEVICEINFO: GETDEVICEINFO4res opgetdeviceinfo; case OP_GETDEVICELIST: GETDEVICELIST4res opgetdevicelist; case OP_LAYOUTCOMMIT: LAYOUTCOMMIT4res oplayoutcommit; case OP_LAYOUTGET: LAYOUTGET4res oplayoutget; case OP_LAYOUTRETURN: LAYOUTRETURN4res oplayoutreturn; case OP_SECINFO_NO_NAME: SECINFO_NO_NAME4res opsecinfo_no_name; case OP_SEQUENCE: SEQUENCE4res opsequence; case OP_SET_SSV: SET_SSV4res opset_ssv; case OP_TEST_STATEID: TEST_STATEID4res optest_stateid; case OP_WANT_DELEGATION: WANT_DELEGATION4res opwant_delegation; case OP_DESTROY_CLIENTID: DESTROY_CLIENTID4res opdestroy_clientid; case OP_RECLAIM_COMPLETE: RECLAIM_COMPLETE4res opreclaim_complete; /* Operations not new to NFSv4.1 */ case OP_ILLEGAL: ILLEGAL4res opillegal; };</artwork> </figure> <figure> <artwork>struct COMPOUND4res { nfsstat4 status; utf8str_cs tag; nfs_resop4resarray<>;resarray<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_COMPOUND_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The COMPOUND procedure is used to combine one or more NFSv4 operations into a single RPC request. The server interprets each of the operations in turn. If an operation is executed by the server and the status of that operation is NFS4_OK, then the next operation in the COMPOUND procedure is executed. The server continues this process until there are no more operations to be executed or until one of the operations has a status value other than NFS4_OK. </t> <t> In the processing of the COMPOUND procedure, the server may find that it does not have the available resources to execute any or all of the operations within the COMPOUND sequence. See <xref target="COMPOUND_Sizing_Issues"/>format="default"/> for a more detailed discussion. </t> <t> The server will generally choose between two methods of decoding the client's request. The first would be the traditional one-pass XDR decode. If there is an XDR decoding error in this case, the RPC XDR decode error would be returned. The second method would be to make an initial pass to decode the basic COMPOUND request and then to XDR decode the individual operations; the most interesting is the decode of attributes. In this case, the server may encounter an XDR decode error during the second pass. If it does, the server would return the error NFS4ERR_BADXDR to signify the decode error. </t> <t> The COMPOUND arguments contain a "minorversion" field. For NFSv4.1, the value for this field is 1. If the server receives a COMPOUND procedure with a minorversion field value that it does not support, the serverMUST<bcp14>MUST</bcp14> return an error of NFS4ERR_MINOR_VERS_MISMATCH and a zero-length resultdata array. </t> <t> Contained within the COMPOUND results is a "status" field. If the results array length is non-zero, this status must be equivalent to the status of the last operation that was executed within the COMPOUND procedure. Therefore, if an operation incurred an error then the "status" value will be the same error value as is being returned for the operation that failed. </t> <t> Note that operations zero and one are not defined for the COMPOUND procedure. Operation 2 is not defined and is reserved for future definition and use with minor versioning. If the server receives an operation array that contains operation 2 and the minorversion field has a value of zero, an error of NFS4ERR_OP_ILLEGAL, as described in the next paragraph, is returned to the client. If an operation array contains an operation 2 and the minorversion field is non-zero and the server does not support the minor version, the server returns an error of NFS4ERR_MINOR_VERS_MISMATCH. Therefore, the NFS4ERR_MINOR_VERS_MISMATCH error takes precedence over all other errors. </t> <t> It is possible that the server receives a request that contains an operation that is less than the first legal operation (OP_ACCESS) or greater than the last legal operation (OP_RELEASE_LOCKOWNER). In this case, the server's response will encode the opcode OP_ILLEGAL rather than the illegal opcode of the request. The status field in the ILLEGAL return results will be set to NFS4ERR_OP_ILLEGAL. The COMPOUND procedure's return results will also be NFS4ERR_OP_ILLEGAL. </t> <t> The definition of the "tag" in the request is left to the implementor. It may be used to summarize the content of the Compound request for the benefit of packet-sniffers and engineers debugging implementations. However, the value of "tag" in the responseSHOULD<bcp14>SHOULD</bcp14> be the same value as provided in the request. This applies to the tag field of the CB_COMPOUND procedure as well. </t> <section toc="exclude" anchor="current_filehandle_stateid"title="Currentnumbered="true"> <name>Current Filehandle andStateid">Stateid</name> <t> The COMPOUND procedure offers a simple environment for the execution of the operations specified by the client. The first two relate to the filehandle while the second two relate to the current stateid. </t> <section toc="exclude" anchor="current_filehandle"title="Current Filehandle">numbered="true"> <name>Current Filehandle</name> <t> The current and saved filehandles are used throughout the protocol. Most operations implicitly use the current filehandle as an argument, and many set the current filehandle as part of the results. The combination of client-specified sequences of operations and current and saved filehandle arguments and results allows for greater protocol flexibility. The best or easiest example of current filehandle usage is a sequence like the following: </t><t><figureanchor='curfh_example'> <artwork>anchor="curfh_example"> <sourcecode type="nfsv4compound"><![CDATA[ PUTFH fh1 {fh1} LOOKUP "compA" {fh2} GETATTR {fh2} LOOKUP "compB" {fh3} GETATTR {fh3} LOOKUP "compC" {fh4} GETATTR {fh4}GETFH </artwork>GETFH]]></sourcecode> </figure></t><t> In this example, the PUTFH (<xreftarget="OP_PUTFH"/>)target="OP_PUTFH" format="default"/>) operation explicitly sets the current filehandle value while the result of each LOOKUP operation sets the current filehandle value to the resultant file system object. Also, the client is able to insert GETATTR operations using the current filehandle as an argument. </t> <t> The PUTROOTFH (<xreftarget="OP_PUTROOTFH"/>)target="OP_PUTROOTFH" format="default"/>) and PUTPUBFH (<xreftarget="OP_PUTPUBFH"/>)target="OP_PUTPUBFH" format="default"/>) operations also set the current filehandle. The above example would replace "PUTFH fh1" with PUTROOTFH or PUTPUBFH with no filehandle argument in order to achieve the same effect (on the assumption that "compA" is directly below the root of the namespace). </t> <t> Along with the current filehandle, there is a saved filehandle. While the current filehandle is set as the result of operations like LOOKUP, the saved filehandle must be set directly with the use of the SAVEFH operation. The SAVEFH operation copies the current filehandle value to the saved value. The saved filehandle value is used in combination with the current filehandle value for the LINK and RENAME operations. The RESTOREFH operation will copy the saved filehandle value to the current filehandle value; as a result, the saved filehandle value may be used a sort of "scratch" area for the client's series of operations. </t> </section> <section toc="exclude" anchor="current_stateid"title="Current Stateid">numbered="true"> <name>Current Stateid</name> <t> With NFSv4.1, additions of a current stateid and a saved stateid have been made to the COMPOUND processing environment; this allows for the passing of stateids between operations. There are no changes to the syntax of the protocol, only changes to the semantics of a few operations. </t> <t> A "current stateid" is the stateid that is associated with the current filehandle. The current stateid may only be changed by an operation that modifies the current filehandle or returns a stateid. If an operation returns a stateid, itMUST<bcp14>MUST</bcp14> set the current stateid to the returned value. If an operation sets the current filehandle but does not return a stateid, the current stateidMUST<bcp14>MUST</bcp14> be set to the all-zeros special stateid, i.e., (seqid, other) = (0, 0). If an operation uses a stateid as an argument but does not return a stateid, the current stateidMUST NOT<bcp14>MUST NOT</bcp14> be changed. For example, PUTFH, PUTROOTFH, and PUTPUBFH will change the current server state from {ocfh, (osid)} to {cfh, (0, 0)}, while LOCK will change the current state from {cfh, (osid} to {cfh, (nsid)}. Operations like LOOKUP that transform a current filehandle and component name into a new current filehandle will also change the current state to {0, 0}. The SAVEFH and RESTOREFH operations will save and restore both the current filehandle and the current stateid as a set. </t> <t> The following example is the common case of a simple READ operation with a normal stateid showing that the PUTFH initializes the current stateid to (0, 0). The subsequent READ with stateid (sid1) leaves the current stateid unchanged. </t> <figureanchor='csid_example1'> <artwork>anchor="csid_example1"> <sourcecode type="nfsv4compound"><![CDATA[ PUTFH fh1 - -> {fh1, (0, 0)} READ (sid1), 0, 1024 {fh1, (0, 0)} -> {fh1, (0,0)} </artwork>0)}]]></sourcecode> </figure> <t> This next example performs an OPEN with the root filehandle and, as a result, generates stateid (sid1). The next operation specifies the READ with the argument stateid set such that (seqid, other) are equal to (1, 0), but the current stateid set by the previous operation is actually used when the operation is evaluated. This allows correct interaction with any existing, potentially conflicting, locks. </t> <figureanchor='csid_example2'> <artwork>anchor="csid_example2"> <sourcecode type="nfsv4compound"><![CDATA[ PUTROOTFH - -> {fh1, (0, 0)} OPEN "compA" {fh1, (0, 0)} -> {fh2, (sid1)} READ (1, 0), 0, 1024 {fh2, (sid1)} -> {fh2, (sid1)} CLOSE (1, 0) {fh2, (sid1)} -> {fh2,(sid2)} </artwork>(sid2)}]]></sourcecode> </figure> <t> This next example is similar to the second in how it passes the stateid sid2 generated by the LOCK operation to the next READ operation. This allows the client to explicitly surround a single I/O operation with a lock and its appropriate stateid to guarantee correctness with other client locks. The example also shows how SAVEFH and RESTOREFH can save and later reuse a filehandle and stateid, passing them as the current filehandle and stateid to a READ operation. </t> <figureanchor='csid_example3'> <artwork>anchor="csid_example3"> <sourcecode type="nfsv4compound"><![CDATA[ PUTFH fh1 - -> {fh1, (0, 0)} LOCK 0, 1024, (sid1) {fh1, (sid1)} -> {fh1, (sid2)} READ (1, 0), 0, 1024 {fh1, (sid2)} -> {fh1, (sid2)} LOCKU 0, 1024, (1, 0) {fh1, (sid2)} -> {fh1, (sid3)} SAVEFH {fh1, (sid3)} -> {fh1, (sid3)} PUTFH fh2 {fh1, (sid3)} -> {fh2, (0, 0)} WRITE (1, 0), 0, 1024 {fh2, (0, 0)} -> {fh2, (0, 0)} RESTOREFH {fh2, (0, 0)} -> {fh1, (sid3)} READ (1, 0), 1024, 1024 {fh1, (sid3)} -> {fh1,(sid3)} </artwork>(sid3)}]]></sourcecode> </figure> <t> The final example shows a disallowed use of the current stateid. The client is attempting to implicitly pass an anonymous special stateid, (0,0), to the READ operation. The serverMUST<bcp14>MUST</bcp14> return NFS4ERR_BAD_STATEID in the reply to the READ operation. </t> <figureanchor='csid_example4'> <artwork>anchor="csid_example4"> <sourcecode type="nfsv4compound"><![CDATA[ PUTFH fh1 - -> {fh1, (0, 0)} READ (1, 0), 0, 1024 {fh1, (0, 0)} ->NFS4ERR_BAD_STATEID </artwork>NFS4ERR_BAD_STATEID]]></sourcecode> </figure> </section> </section> </section> <section toc="exclude" anchor="OP_COMPOUND_ERRORS"title="ERRORS">numbered="true"> <name>ERRORS</name> <t> COMPOUND will of course return every error that each operation on the fore channel can return (see <xreftarget="op_error_returns"/>).target="op_error_returns" format="default"/>). However, if COMPOUND returns zero operations, obviously the error returned by COMPOUND has nothing to do with an error returned by an operation. The list of errors COMPOUND will return if it processes zero operations include: </t><texttable anchor="compounderrs"> <preamble>COMPOUND<table anchor="compounderrs" align="center"> <name>COMPOUND ErrorReturns</preamble> <ttcol align='left'>Error</ttcol> <ttcol align='left'>Notes</ttcol> <c>NFS4ERR_BADCHAR</c> <c>TheReturns</name> <thead> <tr> <th align="left">Error</th> <th align="left">Notes</th> </tr> </thead> <tbody> <tr> <td align="left">NFS4ERR_BADCHAR</td> <td align="left">The tag argument has a character the replier does not support.</c> <c>NFS4ERR_BADXDR</c> <c> </c> <c>NFS4ERR_DELAY</c> <c> </c> <c>NFS4ERR_INVAL</c> <c>The</td> </tr> <tr> <td align="left">NFS4ERR_BADXDR</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_DELAY</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_INVAL</td> <td align="left">The tag argument is not in UTF-8encoding.</c> <c>NFS4ERR_MINOR_VERS_MISMATCH</c> <c> </c> <c>NFS4ERR_SERVERFAULT</c> <c> </c> <c>NFS4ERR_TOO_MANY_OPS</c> <c> </c> <c>NFS4ERR_REP_TOO_BIG</c> <c> </c> <c>NFS4ERR_REP_TOO_BIG_TO_CACHE</c> <c> </c> <c>NFS4ERR_REQ_TOO_BIG</c> <c> </c> </texttable>encoding.</td> </tr> <tr> <td align="left">NFS4ERR_MINOR_VERS_MISMATCH</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_SERVERFAULT</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_TOO_MANY_OPS</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG_TO_CACHE</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_REQ_TOO_BIG</td> <td align="left"> </td> </tr> </tbody> </table> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --></section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --><section anchor="operation_mandlist"title="Operations: REQUIRED, RECOMMENDED,numbered="true" toc="default"> <name>Operations: <bcp14>REQUIRED</bcp14>, <bcp14>RECOMMENDED</bcp14>, orOPTIONAL"><bcp14>OPTIONAL</bcp14></name> <t> The following tables summarize the operations of the NFSv4.1 protocol and the corresponding designation ofREQUIRED, RECOMMENDED,<bcp14>REQUIRED</bcp14>, <bcp14>RECOMMENDED</bcp14>, andOPTIONAL<bcp14>OPTIONAL</bcp14> to implement orMUST NOT<bcp14>MUST NOT</bcp14> implement. The designation ofMUST NOT<bcp14>MUST NOT</bcp14> implement is reserved for those operations that were defined in NFSv4.0 andMUST NOT<bcp14>MUST NOT</bcp14> be implemented in NFSv4.1. </t> <t> For the most part, theREQUIRED, RECOMMENDED,<bcp14>REQUIRED</bcp14>, <bcp14>RECOMMENDED</bcp14>, orOPTIONAL<bcp14>OPTIONAL</bcp14> designation for operations sent by the client is for the server implementation. The client is generally required to implement the operations needed for the operating environment for which it serves. For example, a read-only NFSv4.1 client would have no need to implement the WRITE operation and is not required to do so. </t> <t> TheREQUIRED<bcp14>REQUIRED</bcp14> orOPTIONAL<bcp14>OPTIONAL</bcp14> designation for callback operations sent by the server is for both the client and server. Generally, the client has the option of creating the backchannel and sending the operations on the fore channel that will be a catalyst for the server sending callback operations. A partial exception is CB_RECALL_SLOT; the only way the client can avoid supporting this operation is by not creating a backchannel. </t> <t> Since this is a summary of the operations and their designation, there are subtleties that are not presented here. Therefore, if there is a question of the requirements of implementation, the operation descriptions themselves must be consulted along with other relevant explanatory text within this specification. </t> <t> The abbreviations used in the second and third columns of the table are defined as follows.<list style="hanging"> <t hangText="REQ"> REQUIRED</t> <dl newline="false" spacing="normal"> <dt>REQ</dt> <dd> <bcp14>REQUIRED</bcp14> to implement</t> <t hangText="REC"></dd> <dt>REC</dt> <dd> RECOMMEND to implement</t> <t hangText="OPT"> OPTIONAL</dd> <dt>OPT</dt> <dd> <bcp14>OPTIONAL</bcp14> to implement</t> <t hangText="MNI"> MUST NOT</dd> <dt>MNI</dt> <dd> <bcp14>MUST NOT</bcp14> implement</t> </list> </t></dd> </dl> <t> For the NFSv4.1 features that areOPTIONAL,<bcp14>OPTIONAL</bcp14>, the operations that support those features areOPTIONAL,<bcp14>OPTIONAL</bcp14>, and the server would return NFS4ERR_NOTSUPP in response to the client's use of those operations. If anOPTIONAL<bcp14>OPTIONAL</bcp14> feature is supported, it is possible that a set of operations related to the feature becomeREQUIRED<bcp14>REQUIRED</bcp14> to implement. The third column of the table designates the feature(s) and if the operation isREQUIRED<bcp14>REQUIRED</bcp14> orOPTIONAL<bcp14>OPTIONAL</bcp14> in the presence of support for the feature. </t> <t> TheOPTIONAL<bcp14>OPTIONAL</bcp14> features identified and their abbreviations are as follows:<list style="hanging"> <t hangText="pNFS"></t> <dl newline="false" spacing="normal"> <dt>pNFS</dt> <dd> Parallel NFS</t> <t hangText="FDELG"></dd> <dt>FDELG</dt> <dd> File Delegations</t> <t hangText="DDELG"></dd> <dt>DDELG</dt> <dd> Directory Delegations</t> </list> </t> <texttable> <preamble> Operations </preamble> <ttcol align='left' >Operation</ttcol> <ttcol align='left' >REQ,</dd> </dl> <table align="center"> <name>Operations</name> <thead> <tr> <th align="left">Operation</th> <th align="left">REQ, REC, OPT, orMNI</ttcol> <ttcol align='left' >FeatureMNI</th> <th align="left">Feature (REQ, REC, orOPT)</ttcol> <ttcol align='left' >Definition</ttcol> <c>OPT)</th> <th align="left">Definition</th> </tr> </thead> <tbody> <tr> <td align="left"> ACCESS</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_ACCESS"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> BACKCHANNEL_CTL</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_BACKCHANNEL_CTL"/> </c> <c> BIND_CONN_TO_SESSION</c> <c>REQ</c> <c></c> <c>format="default"/> </td> </tr> <tr> <td align="left"> BIND_CONN_TO_SESSION</td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_BIND_CONN_TO_SESSION"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CLOSE</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_CLOSE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> COMMIT</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_COMMIT"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CREATE</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_CREATE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CREATE_SESSION</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_CREATE_SESSION"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> DELEGPURGE</c> <c>OPT</c> <c>FDELG (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">FDELG (REQ)</td> <td align="left"> <xref target="OP_DELEGPURGE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> DELEGRETURN</c> <c>OPT</c> <c>FDELG,</td> <td align="left">OPT</td> <td align="left">FDELG, DDELG, pNFS(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_DELEGRETURN"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> DESTROY_CLIENTID</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_DESTROY_CLIENTID"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> DESTROY_SESSION</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_DESTROY_SESSION"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> EXCHANGE_ID</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_EXCHANGE_ID"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> FREE_STATEID</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_FREE_STATEID"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> GETATTR</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_GETATTR"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> GETDEVICEINFO</c> <c>OPT</c> <c>pNFS (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">pNFS (REQ)</td> <td align="left"> <xref target="OP_GETDEVICEINFO"/> </c> <c> GETDEVICELIST</c> <c>OPT</c> <c>pNFS (OPT)</c> <c>format="default"/> </td> </tr> <tr> <td align="left"> GETDEVICELIST</td> <td align="left">OPT</td> <td align="left">pNFS (OPT)</td> <td align="left"> <xref target="OP_GETDEVICELIST"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> GETFH</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_GETFH"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> GET_DIR_DELEGATION</c> <c>OPT</c> <c>DDELG (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">DDELG (REQ)</td> <td align="left"> <xref target="OP_GET_DIR_DELEGATION"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LAYOUTCOMMIT</c> <c>OPT</c> <c>pNFS (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">pNFS (REQ)</td> <td align="left"> <xref target="OP_LAYOUTCOMMIT"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LAYOUTGET</c> <c>OPT</c> <c>pNFS (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">pNFS (REQ)</td> <td align="left"> <xref target="OP_LAYOUTGET"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LAYOUTRETURN</c> <c>OPT</c> <c>pNFS (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">pNFS (REQ)</td> <td align="left"> <xref target="OP_LAYOUTRETURN"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LINK</c> <c>OPT</c> <c></c> <c></td> <td align="left">OPT</td> <td align="left"/> <td align="left"> <xref target="OP_LINK"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LOCK</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_LOCK"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LOCKT</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_LOCKT"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LOCKU</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_LOCKU"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LOOKUP</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_LOOKUP"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> LOOKUPP</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_LOOKUPP"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> NVERIFY</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_NVERIFY"/> </c> <c> OPEN </c> <c>REQ</c> <c></c> <c>format="default"/> </td> </tr> <tr> <td align="left"> OPEN </td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_OPEN"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> OPENATTR</c> <c>OPT</c> <c></c> <c></td> <td align="left">OPT</td> <td align="left"/> <td align="left"> <xref target="OP_OPENATTR"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> OPEN_CONFIRM</c> <c>MNI</c> <c></c> <c></td> <td align="left">MNI</td> <td align="left"/> <td align="left"> N/A</c> <c></td> </tr> <tr> <td align="left"> OPEN_DOWNGRADE</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_OPEN_DOWNGRADE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> PUTFH</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_PUTFH"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> PUTPUBFH</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_PUTPUBFH"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> PUTROOTFH</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_PUTROOTFH"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> READ</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_READ"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> READDIR</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_READDIR"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> READLINK</c> <c>OPT</c> <c></c> <c></td> <td align="left">OPT</td> <td align="left"/> <td align="left"> <xref target="OP_READLINK"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> RECLAIM_COMPLETE</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_RECLAIM_COMPLETE"/> </c> <c> RELEASE_LOCKOWNER</c> <c>MNI</c> <c></c> <c>format="default"/> </td> </tr> <tr> <td align="left"> RELEASE_LOCKOWNER</td> <td align="left">MNI</td> <td align="left"/> <td align="left"> N/A</c> <c></td> </tr> <tr> <td align="left"> REMOVE</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_REMOVE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> RENAME</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_RENAME"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> RENEW</c> <c>MNI</c> <c></c> <c></td> <td align="left">MNI</td> <td align="left"/> <td align="left"> N/A</c> <c></td> </tr> <tr> <td align="left"> RESTOREFH</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_RESTOREFH"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> SAVEFH</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_SAVEFH"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> SECINFO</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_SECINFO"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> SECINFO_NO_NAME</c> <c>REC</c> <c>pNFS</td> <td align="left">REC</td> <td align="left">pNFS file layout(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_SECINFO_NO_NAME"/>,format="default"/>, <xreftarget="file_security_considerations"/> </c> <c> SEQUENCE </c> <c>REQ</c> <c></c> <c>target="file_security_considerations" format="default"/> </td> </tr> <tr> <td align="left"> SEQUENCE </td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_SEQUENCE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> SETATTR</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_SETATTR"/> </c> <c> SETCLIENTID</c> <c>MNI</c> <c></c> <c>format="default"/> </td> </tr> <tr> <td align="left"> SETCLIENTID</td> <td align="left">MNI</td> <td align="left"/> <td align="left"> N/A</c> <c> SETCLIENTID_CONFIRM</c> <c>MNI</c> <c></c> <c></td> </tr> <tr> <td align="left"> SETCLIENTID_CONFIRM</td> <td align="left">MNI</td> <td align="left"/> <td align="left"> N/A</c> <c> SET_SSV</c> <c>REQ</c> <c></c> <c></td> </tr> <tr> <td align="left"> SET_SSV</td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_SET_SSV"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> TEST_STATEID</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_TEST_STATEID"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> VERIFY</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_VERIFY"/> </c> <c> WANT_DELEGATION</c> <c>OPT</c> <c>FDELG (OPT)</c> <c>format="default"/> </td> </tr> <tr> <td align="left"> WANT_DELEGATION</td> <td align="left">OPT</td> <td align="left">FDELG (OPT)</td> <td align="left"> <xref target="OP_WANT_DELEGATION"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> WRITE</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_WRITE"/> </c> </texttable> <texttable> <preamble> Callback Operations </preamble> <ttcol align='left' >Operation</ttcol> <ttcol align='left' >REQ,format="default"/> </td> </tr> </tbody> </table> <table align="center"> <name>Callback Operations</name> <thead> <tr> <th align="left">Operation</th> <th align="left">REQ, REC, OPT, orMNI</ttcol> <ttcol align='left' >FeatureMNI</th> <th align="left">Feature (REQ, REC, orOPT)</ttcol> <ttcol align='left' >Definition</ttcol> <c>OPT)</th> <th align="left">Definition</th> </tr> </thead> <tbody> <tr> <td align="left"> CB_GETATTR</c> <c>OPT</c> <c>FDELG (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">FDELG (REQ)</td> <td align="left"> <xref target="OP_CB_GETATTR"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_LAYOUTRECALL</c> <c>OPT</c> <c>pNFS (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">pNFS (REQ)</td> <td align="left"> <xref target="OP_CB_LAYOUTRECALL"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_NOTIFY</c> <c>OPT</c> <c>DDELG (REQ)</c> <c></td> <td align="left">OPT</td> <td align="left">DDELG (REQ)</td> <td align="left"> <xref target="OP_CB_NOTIFY"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_NOTIFY_DEVICEID</c> <c>OPT</c> <c>pNFS (OPT)</c> <c></td> <td align="left">OPT</td> <td align="left">pNFS (OPT)</td> <td align="left"> <xref target="OP_CB_NOTIFY_DEVICEID"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_NOTIFY_LOCK</c> <c>OPT</c> <c></c> <c></td> <td align="left">OPT</td> <td align="left"/> <td align="left"> <xref target="OP_CB_NOTIFY_LOCK"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_PUSH_DELEG</c> <c>OPT</c> <c>FDELG (OPT)</c> <c></td> <td align="left">OPT</td> <td align="left">FDELG (OPT)</td> <td align="left"> <xref target="OP_CB_PUSH_DELEG"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_RECALL</c> <c>OPT</c> <c>FDELG,</td> <td align="left">OPT</td> <td align="left">FDELG, DDELG, pNFS(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_CB_RECALL"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_RECALL_ANY</c> <c>OPT</c> <c>FDELG,</td> <td align="left">OPT</td> <td align="left">FDELG, DDELG, pNFS(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_CB_RECALL_ANY"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_RECALL_SLOT</c> <c>REQ</c> <c></c> <c></td> <td align="left">REQ</td> <td align="left"/> <td align="left"> <xref target="OP_CB_RECALL_SLOT"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_RECALLABLE_OBJ_AVAIL</c> <c>OPT</c> <c>DDELG,</td> <td align="left">OPT</td> <td align="left">DDELG, pNFS(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_CB_RECALLABLE_OBJ_AVAIL"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_SEQUENCE</c> <c>OPT</c> <c>FDELG,</td> <td align="left">OPT</td> <td align="left">FDELG, DDELG, pNFS(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_CB_SEQUENCE"/> </c> <c>format="default"/> </td> </tr> <tr> <td align="left"> CB_WANTS_CANCELLED</c> <c>OPT</c> <c>FDELG,</td> <td align="left">OPT</td> <td align="left">FDELG, DDELG, pNFS(REQ)</c> <c>(REQ)</td> <td align="left"> <xref target="OP_CB_WANTS_CANCELLED"/> </c> </texttable>format="default"/> </td> </tr> </tbody> </table> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="nfsv41operations"title="NFSv4.1 Operations"> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) -->numbered="true" toc="default"> <name>NFSv4.1 Operations</name> <section anchor="OP_ACCESS"title="Operationnumbered="true" toc="default"> <name>Operation 3: ACCESS - Check AccessRights" >Rights</name> <section toc="exclude" anchor="OP_ACCESS_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ const ACCESS4_READ = 0x00000001; const ACCESS4_LOOKUP = 0x00000002; const ACCESS4_MODIFY = 0x00000004; const ACCESS4_EXTEND = 0x00000008; const ACCESS4_DELETE = 0x00000010; const ACCESS4_EXECUTE = 0x00000020; struct ACCESS4args { /* CURRENT_FH: object */ uint32_t access;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_ACCESS_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct ACCESS4resok { uint32_t supported; uint32_t access; }; union ACCESS4res switch (nfsstat4 status) { case NFS4_OK: ACCESS4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_ACCESS_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> ACCESS determines the access rights that a user, as identified by the credentials in the RPC request, has with respect to the file system object specified by the current filehandle. The client encodes the set of access rights that are to be checked in the bit mask "access". The server checks the permissions encoded in the bit mask. If a status of NFS4_OK is returned, two bit masks are included in the response. The first, "supported", represents the access rights for which the server can verify reliably. The second, "access", represents the access rights available to the user for the filehandle provided. On success, the current filehandle retains its value. </t> <t> Note that the reply's supported and access fieldsMUST NOT<bcp14>MUST NOT</bcp14> contain more values than originally set in the request's access field. For example, if the client sends an ACCESS operation with just the ACCESS4_READ value set and the server supports this value, the serverMUST NOT<bcp14>MUST NOT</bcp14> set more than ACCESS4_READ in the supported field even if it could have reliably checked other values. </t> <t> The reply's access fieldMUST NOT<bcp14>MUST NOT</bcp14> contain more values than the supported field. </t> <t> The results of this operation are necessarily advisory in nature. A return status of NFS4_OK and the appropriate bit set in the bit mask do not imply that such access will be allowed to the file system object in the future. This is because access rights can be revoked by the server at any time. </t> <t> The following access permissions may be requested:<list style="hanging"> <t hangText="ACCESS4_READ"></t> <dl newline="false" spacing="normal"> <dt>ACCESS4_READ</dt> <dd> Read data from file or read a directory.</t> <t hangText="ACCESS4_LOOKUP"></dd> <dt>ACCESS4_LOOKUP</dt> <dd> Look up a name in a directory (no meaning for non-directory objects).</t> <t hangText="ACCESS4_MODIFY"></dd> <dt>ACCESS4_MODIFY</dt> <dd> Rewrite existing file data or modify existing directory entries.</t> <t hangText="ACCESS4_EXTEND"></dd> <dt>ACCESS4_EXTEND</dt> <dd> Write new data or add directory entries.</t> <t hangText="ACCESS4_DELETE"></dd> <dt>ACCESS4_DELETE</dt> <dd> Delete an existing directory entry.</t> <t hangText="ACCESS4_EXECUTE"></dd> <dt>ACCESS4_EXECUTE</dt> <dd> Execute a regular file (no meaning for a directory).</t> </list></dd> </dl> <t> On success, the current filehandle retains its value. </t> <t> ACCESS4_EXECUTE is a challenging semantic to implement because NFS provides remote file access, not remote execution. This leads to the following:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Whether or not a regular file is executable ought to be the responsibility of the NFS client and not the server. And yet the ACCESS operation is specified to seemingly require a server to own that responsibility.</t> <t></li> <li> When a client executes a regular file, it has to read the file from the server. Strictly speaking, the server should not allow the client to read a file being executed unless the user has read permissions on the file. Requiring explicit read permissions on executable files in order to access them over NFS is not going to be acceptable to some users and storage administrators. Historically, NFS servers have allowed a user to READ a file if the user has execute access to the file.</t> </list> </t></li> </ul> <t> As a practical example, the UNIX specification <xreftarget="access_api"/>target="access_api" format="default"/> states that an implementation claiming conformance to UNIX may indicate in the access() programming interface's result that a privileged user has execute rights, even if no execute permission bits are set on the regular file's attributes. It is possible to claim conformance to the UNIX specification and instead not indicate execute rights in that situation, which is true for some operating environments. Suppose the operating environments of the client and server are implementing the access() semantics for privileged users differently, and the ACCESS operation implementations of the client and server follow their respective access() semantics. This can cause undesired behavior:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Suppose the client's access() interface returns X_OK if the user is privileged and no execute permission bits are set on the regular file's attribute, and the server's access() interface does not return X_OK in that situation. Then the client will be unable to execute files stored on the NFS server that could be executed if stored on a non-NFS file system.</t></li> <li> <t> Suppose the client's access() interface does not return X_OK if the user is privileged, and no execute permission bits are set on the regular file's attribute, and the server's access() interface does return X_OK in that situation. Then:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The client will be able to execute files stored on the NFS server that could be executed if stored on a non-NFS file system, unless the client's execution subsystem also checks for execute permission bits.</t> <t></li> <li> Even if the execution subsystem is checking for execute permission bits, there are more potential issues. For example, suppose the client is invoking access() to build a "path search table" of all executable files in the user's "search path", where the path is a list of directories each containing executable files. Suppose there are two files each in separate directories of the search path, such that files have the same component name. In the first directory the file has no execute permission bits set, and in the second directory the file has execute bits set. The path search table will indicate that the first directory has the executable file, but the execute subsystem will fail to execute it. The command shell might fail to try the second file in the second directory. And even if it did, this is a potential performance issue. Clearly, the desired outcome for the client is for the path search table to not contain the first file.</t> </list> </t> </list> </t></li> </ul> </li> </ul> <t> To deal with the problems described above, the "smart client, stupid server" principle is used. The client owns overall responsibility for determining execute access and relies on the server to parse the execution permissions within the file's mode, acl, and dacl attributes. The rules for the client and server follow:<list style='symbols'> <t></t> <ul spacing="normal"> <li> If the client is sending ACCESS in order to determine if the user can read the file, the clientSHOULD<bcp14>SHOULD</bcp14> set ACCESS4_READ in the request's access field.</t> <t></li> <li> If the client's operating environment only grants execution to the user if the user has execute access according to the execute permissions in the mode, acl, and dacl attributes, then if the client wants to determine execute access, the clientSHOULD<bcp14>SHOULD</bcp14> send an ACCESS request with ACCESS4_EXECUTE bit set in the request's access field.</t> <t></li> <li> If the client's operating environment grants execution to the user even if the user does not have execute access according to the execute permissions in the mode, acl, and dacl attributes, then if the client wants to determine execute access, itSHOULD<bcp14>SHOULD</bcp14> send an ACCESS request with both the ACCESS4_EXECUTE and ACCESS4_READ bits set in the request's access field. This way, if any read or execute permission grants the user read or execute access (or if the server interprets the user as privileged), as indicated by the presence of ACCESS4_EXECUTE and/or ACCESS4_READ in the reply's access field, the client will be able to grant the user execute access to the file.</t> <t></li> <li> If the server supports execute permission bits, or some other method for denoting executability (e.g., the suffix of the name of the file might indicate execute), itMUST<bcp14>MUST</bcp14> check only execute permissions, not read permissions, when determining whether or not the reply will have ACCESS4_EXECUTE set in the access field. The serverMUST NOT<bcp14>MUST NOT</bcp14> also examine read permission bits when determining whether or not the reply will have ACCESS4_EXECUTE set in the access field. Even if the server's operating environment would grant execute access to the user (e.g., the user is privileged), the serverMUST NOT<bcp14>MUST NOT</bcp14> reply with ACCESS4_EXECUTE set in reply's access field unless there is at least one execute permission bit set in the mode, acl, or dacl attributes. In the case of acl and dacl, the "one execute permission bit"MUST<bcp14>MUST</bcp14> be an ACE4_EXECUTE bit set in an ALLOW ACE.</t> <t></li> <li> If the server does not support execute permission bits or some other method for denoting executability, itMUST NOT<bcp14>MUST NOT</bcp14> set ACCESS4_EXECUTE in the reply's supported and access fields. If the client set ACCESS4_EXECUTE in the ACCESS request's access field, and ACCESS4_EXECUTE is not set in the reply's supported field, then the client will have to send an ACCESS request with the ACCESS4_READ bit set in the request's access field.</t> <t></li> <li> If the server supports read permission bits, itMUST<bcp14>MUST</bcp14> only check for read permissions in the mode, acl, and dacl attributes when it receives an ACCESS request with ACCESS4_READ set in the access field. The serverMUST NOT<bcp14>MUST NOT</bcp14> also examine execute permission bits when determining whether the reply will have ACCESS4_READ set in the access field or not.</t> </list></li> </ul> <t> Note that if the ACCESS reply has ACCESS4_READ or ACCESS_EXECUTE set, then the user also has permissions to OPEN (<xreftarget="OP_OPEN"/>)target="OP_OPEN" format="default"/>) or READ (<xreftarget="OP_READ"/>)target="OP_READ" format="default"/>) the file. In other words, if the client sends an ACCESS request with the ACCESS4_READ and ACCESS_EXECUTE set in the access field (or two separate requests, one with ACCESS4_READ set and the other with ACCESS4_EXECUTE set), and the reply has just ACCESS4_EXECUTE set in the access field (or just one reply has ACCESS4_EXECUTE set), then the user has authorization to OPEN or READ the file. </t> </section> <section toc="exclude" anchor="OP_ACCESS_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> In general, it is not sufficient for the client to attempt to deduce access permissions by inspecting the uid, gid, and mode fields in the file attributes or by attempting to interpret the contents of the ACL attribute. This is because the server may perform uid or gid mapping or enforce additional access-control restrictions. It is also possible that the server may not be in the same ID space as the client. In these cases (and perhaps others), the client cannot reliably perform an access check with only current file attributes. </t> <t> In the NFSv2 protocol, the only reliable way to determine whether an operation was allowed was to try it and see if it succeeded or failed. Using the ACCESS operation in the NFSv4.1 protocol, the client can ask the server to indicate whether or not one or more classes of operations are permitted. The ACCESS operation is provided to allow clients to check before doing a series of operations that will result in an access failure. The OPEN operation provides a point where the server can verify access to the file object and a method to return that information to the client. The ACCESS operation is still useful for directory operations or for use in the case that the UNIX interface access() is used on the client. </t> <t> The information returned by the server in response to an ACCESS call is not permanent. It was correct at the exact time that the server performed the checks, but not necessarily afterwards. The server can revoke access permission at any time. </t> <t> The client should use the effective credentials of the user to build the authentication information in the ACCESS request used to determine access rights. It is the effective user and group credentials that are used in subsequent READ and WRITE operations. </t> <t> Many implementations do not directly support the ACCESS4_DELETE permission. Operating systems like UNIX will ignore the ACCESS4_DELETE bit if set on an access request on a non-directory object. In these systems, delete permission on a file is determined by the access permissions on the directory in which the file resides, instead of being determined by the permissions of the file itself. Therefore, the mask returned enumerating which access rights can be determined will have the ACCESS4_DELETE value set to 0. This indicates to the client that the server was unable to check that particular access right. The ACCESS4_DELETE bit in the access mask returned will then be ignored by the client. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CLOSE"title="Operationnumbered="true" toc="default"> <name>Operation 4: CLOSE - CloseFile" >File</name> <section toc="exclude" anchor="OP_CLOSE_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct CLOSE4args { /* CURRENT_FH: object */ seqid4 seqid; stateid4 open_stateid;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_CLOSE_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ union CLOSE4res switch (nfsstat4 status) { case NFS4_OK: stateid4 open_stateid; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_CLOSE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CLOSE operation releases share reservations for the regular or named attribute file as specified by the current filehandle. The share reservations and other state information released at the server as a result of this CLOSE are only those associated with the supplied stateid. State associated with other OPENs is not affected. </t> <t> If byte-range locks are held, the clientSHOULD<bcp14>SHOULD</bcp14> release all locks before sending a CLOSE. The serverMAY<bcp14>MAY</bcp14> free all outstanding locks on CLOSE, but some servers may not support the CLOSE of a file that still has byte-range locks held. The serverMUST<bcp14>MUST</bcp14> return failure if any locks would exist after the CLOSE. </t> <t> The argument seqidMAY<bcp14>MAY</bcp14> have any value, and the serverMUST<bcp14>MUST</bcp14> ignore seqid. </t> <t> On success, the current filehandle retains its value. </t> <t> The serverMAY<bcp14>MAY</bcp14> require that the combination of principal, security flavor, and, if applicable, GSS mechanism that sent the OPEN request also be the one to CLOSE the file. This might not be possible if credentials for the principal are no longer available. The serverMAY<bcp14>MAY</bcp14> allow the machine credential or SSV credential (see <xref target="OP_EXCHANGE_ID"/>)format="default"/>) to send CLOSE. </t> </section> <section toc="exclude" anchor="OP_CLOSE_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Even though CLOSE returns a stateid, this stateid is not useful to the client and should be treated as deprecated. CLOSE "shuts down" the state associated with all OPENs for the file by a single open-owner. As noted above, CLOSE will either release all file-locking state or return an error. Therefore, the stateid returned by CLOSE is not useful for operations that follow. To help find any uses of this stateid by clients, the serverSHOULD<bcp14>SHOULD</bcp14> return the invalid special stateid (the "other" value is zero and the "seqid" field is NFS4_UINT32_MAX, see <xreftarget="special_stateid"/>).target="special_stateid" format="default"/>). </t> <t> A CLOSE operation may make delegations grantable where they were not previously. Servers may choose to respond immediately if there are pending delegation want requests or may respond to the situation at a later time. </t> </section> </section> <section anchor="OP_COMMIT"title="Operationnumbered="true" toc="default"> <name>Operation 5: COMMIT - Commit CachedData" >Data</name> <section toc="exclude" anchor="OP_COMMIT_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct COMMIT4args { /* CURRENT_FH: file */ offset4 offset; count4 count;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_COMMIT_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct COMMIT4resok { verifier4 writeverf; }; union COMMIT4res switch (nfsstat4 status) { case NFS4_OK: COMMIT4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_COMMIT_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The COMMIT operation forces or flushes uncommitted, modified data to stable storage for the file specified by the current filehandle. The flushed data is that which was previously written with one or more WRITE operations that had the "committed" field of their results field set to UNSTABLE4. </t> <t> The offset specifies the position within the file where the flush is to begin. An offset value of zero means to flush data starting at the beginning of the file. The count specifies the number of bytes of data to flush. If the count is zero, a flush from the offset to the end of the file is done. </t> <t> The server returns a write verifier upon successful completion of the COMMIT. The write verifier is used by the client to determine if the server has restarted between the initial WRITE operations and the COMMIT. The client does this by comparing the write verifier returned from the initial WRITE operations and the verifier returned by the COMMIT operation. The server must vary the value of the write verifier at each server event or instantiation that may lead to a loss of uncommitted data. Most commonly this occurs when the server is restarted; however, other events at the server may result in uncommitted data loss as well. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_COMMIT_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The COMMIT operation is similar in operation and semantics to the <xreftarget="fsync">POSIXtarget="fsync" format="default">POSIX fsync()</xref> system interface that synchronizes a file's state with the disk (file data and metadata is flushed to disk or stable storage). COMMIT performs the same operation for a client, flushing any unsynchronized data and metadata on the server to the server's disk or stable storage for the specified file. Like fsync(), it may be that there is some modified data or no modified data to synchronize. The data may have been synchronized by the server's normal periodic buffer synchronization activity. COMMIT should return NFS4_OK, unless there has been an unexpected error. </t> <t> COMMIT differs from fsync() in that it is possible for the client to flush a range of the file (most likely triggered by a buffer-reclamation scheme on the client before the file has been completely written). </t> <t> The server implementation of COMMIT is reasonably simple. If the server receives a full file COMMIT request, that is, starting at offset zero and count zero, it should do the equivalent of applying fsync() to the entire file. Otherwise, it should arrange to have the modified data in the range specified by offset and count to be flushed to stable storage. In both cases, any metadata associated with the file must be flushed to stable storage before returning. It is not an error for there to be nothing to flush on the server. This means that the data and metadata that needed to be flushed have already been flushed or lost during the last server failure. </t> <t> The client implementation of COMMIT is a little more complex. There are two reasons for wanting to commit a client buffer to stable storage. The first is that the client wants to reuse a buffer. In this case, the offset and count of the buffer are sent to the server in the COMMIT request. The server then flushes any modified data based on the offset and count, and flushes any modified metadata associated with the file. It then returns the status of the flush and the write verifier. The second reason for the client to generate a COMMIT is for a full file flush, such as may be done at close. In this case, the client would gather all of the buffers for this file that contain uncommitted data, do the COMMIT operation with an offset of zero and count of zero, and then free all of those buffers. Any other dirty buffers would be sent to the server in the normal fashion. </t> <t> After a buffer is written (via the WRITE operation) by the client with the "committed" field in the result of WRITE set to UNSTABLE4, the buffer must be considered as modified by the client until the buffer has either been flushed via a COMMIT operation or written via a WRITE operation with the "committed" field in the result set to FILE_SYNC4 or DATA_SYNC4. This is done to prevent the buffer from being freed and reused before the data can be flushed to stable storage on the server. </t> <t> When a response is returned from either a WRITE or a COMMIT operation and it contains a write verifier that differs from that previously returned by the server, the client will need to retransmit all of the buffers containing uncommitted data to the server. How this is to be done is up to the implementor. If there is only one buffer of interest, then it should be sent in a WRITE request with the FILE_SYNC4 stable parameter. If there is more than one buffer, it might be worthwhile retransmitting all of the buffers in WRITE operations with the stable parameter set to UNSTABLE4 and then retransmitting the COMMIT operation to flush all of the data on the server to stable storage. However, if the server repeatably returns from COMMIT a verifier that differs from that returned by WRITE, the only way to ensure progress is to retransmit all of the buffers with WRITE requests with the FILE_SYNC4 stable parameter. </t> <t> The above description applies to page-cache-based systems as well as buffer-cache-based systems. In the former systems, the virtual memory system will need to be modified instead of the buffer cache. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CREATE"title="Operationnumbered="true" toc="default"> <name>Operation 6: CREATE - Create a Non-Regular FileObject" >Object</name> <section toc="exclude" anchor="OP_CREATE_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ union createtype4 switch (nfs_ftype4 type) { case NF4LNK: linktext4 linkdata; case NF4BLK: case NF4CHR: specdata4 devdata; case NF4SOCK: case NF4FIFO: case NF4DIR: void; default: void; /* server should return NFS4ERR_BADTYPE */ }; struct CREATE4args { /* CURRENT_FH: directory for creation */ createtype4 objtype; component4 objname; fattr4 createattrs;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_CREATE_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct CREATE4resok { change_info4 cinfo; bitmap4 attrset; /* attributes set */ }; union CREATE4res switch (nfsstat4 status) { case NFS4_OK: /* new CURRENTFH: created object */ CREATE4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_CREATE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CREATE operation creates a file object other than an ordinary file in a directory with a given name. The OPEN operationMUST<bcp14>MUST</bcp14> be used to create a regular file or a named attribute. </t> <t> The current filehandle must be a directory: an object of type NF4DIR. If the current filehandle is an attribute directory (type NF4ATTRDIR), the error NFS4ERR_WRONG_TYPE is returned. If the currentfile handlefilehandle designates any other type of object, the error NFS4ERR_NOTDIR results. </t> <t> The objname specifies the name for the new object. The objtype determines the type of object to be created: directory, symlink, etc. If the object type specified is that of an ordinary file, a named attribute, or a named attribute directory, the error NFS4ERR_BADTYPE results. </t> <t> If an object of the same name already exists in the directory, the server will return the error NFS4ERR_EXIST. </t> <t> For the directory where the new file object was created, the server returns change_info4 information in cinfo. With the atomic field of the change_info4 data type, the server will indicate if the before and after change attributes were obtained atomically with respect to the file object creation. </t> <t> If the objname has a length of zero, or if objname does not obey the UTF-8 definition, the error NFS4ERR_INVAL will be returned. </t> <t> The current filehandle is replaced by that of the new object. </t> <t> The createattrs specifies the initial set of attributes for the object. The set of attributes may include any writable attribute valid for the object type. When the operation is successful, the server will return to the client an attribute mask signifying which attributes were successfully set for the object. </t> <t> If createattrs includes neither the owner attribute nor an ACL with an ACE for the owner, and if the server's file system both supports and requires an owner attribute (or an owner ACE), then the serverMUST<bcp14>MUST</bcp14> derive the owner (or the owner ACE). This would typically be from the principal indicated in the RPC credentials of the call, but the server's operating environment or file system semantics may dictate other methods of derivation. Similarly, if createattrs includes neither the group attribute nor a group ACE, and if the server's file system both supports and requires the notion of a group attribute (or group ACE), the serverMUST<bcp14>MUST</bcp14> derive the group attribute (or the corresponding owner ACE) for the file. This could be from the RPC call's credentials, such as the group principal if the credentials include it (such as with AUTH_SYS), from the group identifier associated with the principal in the credentials (e.g., POSIX systems have a <xreftarget="passwd">usertarget="passwd" format="default">user database</xref> that has a group identifier for every user identifier), inherited from the directory in which the object is created, or whatever else the server's operating environment or file system semantics dictate. This applies to the OPEN operation too. </t> <t> Conversely, it is possible that the client will specify in createattrs an owner attribute, group attribute, or ACL that the principal indicated the RPC call's credentials does not have permissions to create files for. The error to be returned in this instance is NFS4ERR_PERM. This applies to the OPEN operation too. </t> <t> If the current filehandle designates a directory for which another client holds a directory delegation, then, unless the delegation is such that the situation can be resolved by sending a notification, the delegationMUST<bcp14>MUST</bcp14> be recalled, and the CREATE operationMUST NOT<bcp14>MUST NOT</bcp14> proceed until the delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. </t> <t> When the current filehandle designates a directory for which one or more directory delegations exist, then, when those delegations request such notifications, NOTIFY4_ADD_ENTRY will be generated as a result of this operation. </t> <t> If the capability FSCHARSET_CAP4_ALLOWS_ONLY_UTF8 is set (<xreftarget="utf8_caps"/>),target="utf8_caps" format="default"/>), and a symbolic link is being created, then the content of the symbolic linkMUST<bcp14>MUST</bcp14> be in UTF-8 encoding. </t> </section> <section toc="exclude" anchor="OP_CREATE_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the client desires to set attribute values after the create, a SETATTR operation can be added to the COMPOUND request so that the appropriate attributes will be set. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_DELEGPURGE"title="Operationnumbered="true" toc="default"> <name>Operation 7: DELEGPURGE - Purge Delegations AwaitingRecovery" >Recovery</name> <section toc="exclude" anchor="OP_DELEGPURGE_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct DELEGPURGE4args { clientid4 clientid;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DELEGPURGE_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct DELEGPURGE4res { nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DELEGPURGE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation purges all of the delegations awaiting recovery for a given client. This is useful for clients that do not commit delegation information to stable storage to indicate that conflicting requests need not be delayed by the server awaiting recovery of delegation information. </t> <t> The client is NOT specified by the clientid field of the request. The clientSHOULD<bcp14>SHOULD</bcp14> set the client field to zero, and the serverMUST<bcp14>MUST</bcp14> ignore the clientid field. Instead, the serverMUST<bcp14>MUST</bcp14> derive the client ID from the value of the session ID in the arguments of the SEQUENCE operation that precedes DELEGPURGE in the COMPOUND request. </t> <t> The DELEGPURGE operation should be used by clients that record delegation information on stable storage on the client. In this case, after the client recovers all delegations it knows of, it should immediately send a DELEGPURGE operation. Doing so will notify the server that no additional delegations for the client will be recovered allowing it to free resources, and avoid delaying other clients which make requests that conflict with the unrecovered delegations. The set of delegations known to the server and the client might be different. The reason for this is that after sending a request that resulted in a delegation, the client might experience a failure before it both received the delegation and committed the delegation to the client's stable storage. </t> <t> The serverMAY<bcp14>MAY</bcp14> support DELEGPURGE, but if it does not, itMUST NOT<bcp14>MUST NOT</bcp14> support CLAIM_DELEGATE_PREV andMUST NOT<bcp14>MUST NOT</bcp14> support CLAIM_DELEG_PREV_FH. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_DELEGRETURN"title="Operationnumbered="true" toc="default"> <name>Operation 8: DELEGRETURN - ReturnDelegation" >Delegation</name> <section toc="exclude" anchor="OP_DELEGRETURN_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct DELEGRETURN4args { /* CURRENT_FH: delegated object */ stateid4 deleg_stateid;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DELEGRETURN_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct DELEGRETURN4res { nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DELEGRETURN_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The DELEGRETURN operation returns the delegation represented by the current filehandle and stateid. </t> <t> Delegations may be returned voluntarily (i.e., before the server has recalled them) or when recalled. In either case, the client must properly propagate state changed under the context of the delegation to the server before returning the delegation. </t> <t> The serverMAY<bcp14>MAY</bcp14> require that the principal, security flavor, and if applicable, the GSS mechanism, combination that acquired the delegation also be the one to send DELEGRETURN on the file. This might not be possible if credentials for the principal are no longer available. The serverMAY<bcp14>MAY</bcp14> allow the machine credential or SSV credential (see <xref target="OP_EXCHANGE_ID"/>)format="default"/>) to send DELEGRETURN. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_GETATTR"title="Operationnumbered="true" toc="default"> <name>Operation 9: GETATTR - GetAttributes" >Attributes</name> <section toc="exclude" anchor="OP_GETATTR_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct GETATTR4args { /* CURRENT_FH: object */ bitmap4 attr_request;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETATTR_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct GETATTR4resok { fattr4 obj_attributes; }; union GETATTR4res switch (nfsstat4 status) { case NFS4_OK: GETATTR4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETATTR_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The GETATTR operation will obtain attributes for the file system object specified by the current filehandle. The client sets a bit in the bitmap argument for each attribute value that it would like the server to return. The server returns an attribute bitmap that indicates the attribute values that it was able to return, which will include all attributes requested by the client that are attributes supported by the server for the target file system. This bitmap is followed by the attribute values ordered lowest attribute number first. </t> <t> The serverMUST<bcp14>MUST</bcp14> return a value for each attribute that the client requests if the attribute is supported by the server for the target file system. If the server does not support a particular attribute on the target file system, then itMUST NOT<bcp14>MUST NOT</bcp14> return the attribute value andMUST NOT<bcp14>MUST NOT</bcp14> set the attribute bit in the result bitmap. The serverMUST<bcp14>MUST</bcp14> return an error if it supports an attribute on the target but cannot obtain its value. In that case, no attribute values will be returned. </t> <t> File systems that are absent should be treated as having support for a very small set of attributes as described in <xreftarget="absent_getattr"/>,target="absent_getattr" format="default"/>, even if previously, when the file system was present, more attributes were supported. </t> <t> All serversMUST<bcp14>MUST</bcp14> support theREQUIRED<bcp14>REQUIRED</bcp14> attributes as specified in <xreftarget="mandatory_attributes"/>,target="mandatory_attributes" format="default"/>, for all file systems, with the exception of absent file systems. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_GETATTR_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Suppose there is an OPEN_DELEGATE_WRITE delegation held by another client for the file in question and size and/or change are among the set of attributes being interrogated. The server has two choices. First, the server can obtain the actual current value of these attributes from the client holding the delegation by using the CB_GETATTR callback. Second, the server, particularly when the delegated client is unresponsive, can recall the delegation in question. The GETATTRMUST NOT<bcp14>MUST NOT</bcp14> proceed until one of the following occurs:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The requested attribute values are returned in the response to CB_GETATTR.</t> <t></li> <li> The OPEN_DELEGATE_WRITE delegation is returned.</t> <t></li> <li> The OPEN_DELEGATE_WRITE delegation is revoked.</t> </list> </t></li> </ul> <t> Unless one of the above happens very quickly, one or more NFS4ERR_DELAY errors will be returned while a delegation is outstanding. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_GETFH"title="Operationnumbered="true" toc="default"> <name>Operation 10: GETFH - Get CurrentFilehandle" >Filehandle</name> <section toc="exclude" anchor="OP_GETFH_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* CURRENT_FH: */ void;</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETFH_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct GETFH4resok { nfs_fh4 object; }; union GETFH4res switch (nfsstat4 status) { case NFS4_OK: GETFH4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETFH_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation returns the current filehandle value. </t> <t> On success, the current filehandle retains its value. </t> <t> As described in <xreftarget="COMPOUND_Sizing_Issues"/>,target="COMPOUND_Sizing_Issues" format="default"/>, GETFH isREQUIRED<bcp14>REQUIRED</bcp14> orRECOMMENDED<bcp14>RECOMMENDED</bcp14> to immediately follow certain operations, and servers are free to reject such operations if the client fails to insert GETFH in the request asREQUIRED<bcp14>REQUIRED</bcp14> orRECOMMENDED.<bcp14>RECOMMENDED</bcp14>. <xreftarget="open_getfh_issue"/>target="open_getfh_issue" format="default"/> provides additional justification for why GETFHMUST<bcp14>MUST</bcp14> follow OPEN. </t> </section> <section toc="exclude" anchor="OP_GETFH_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Operations that change the current filehandle like LOOKUP or CREATE do not automatically return the new filehandle as a result. For instance, if a client needs to look up a directory entry and obtain its filehandle, then the following request is needed. </t><t> <list style="empty"> <t><ul empty="true" spacing="normal"> <li> PUTFH (directory filehandle)</t> <t></li> <li> LOOKUP (entry name)</t> <t></li> <li> GETFH</t> </list> </t></li> </ul> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LINK"title="Operationnumbered="true" toc="default"> <name>Operation 11: LINK - Create Link to aFile" >File</name> <section toc="exclude" anchor="OP_LINK_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct LINK4args { /* SAVED_FH: source object */ /* CURRENT_FH: target directory */ component4 newname;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LINK_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct LINK4resok { change_info4 cinfo; }; union LINK4res switch (nfsstat4 status) { case NFS4_OK: LINK4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LINK_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LINK operation creates an additional newname for the file represented by the saved filehandle, as set by the SAVEFH operation, in the directory represented by the current filehandle. The existing file and the target directory must reside within the same file system on the server. On success, the current filehandle will continue to be the target directory. If an object exists in the target directory with the same name as newname, the server must return NFS4ERR_EXIST. </t> <t> For the target directory, the server returns change_info4 information in cinfo. With the atomic field of the change_info4 data type, the server will indicate if the before and after change attributes were obtained atomically with respect to the link creation. </t> <t> If the newname has a length of zero, or if newname does not obey the UTF-8 definition, the error NFS4ERR_INVAL will be returned. </t> </section> <section toc="exclude" anchor="OP_LINK_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The serverMAY<bcp14>MAY</bcp14> impose restrictions on the LINK operation such that LINK may not be done when the file is open or when that open is done by particular protocols, or with particular options or access modes. When LINK is rejected because of such restrictions, the error NFS4ERR_FILE_OPEN is returned. </t> <t> If a server does implement such restrictions and those restrictions include cases of NFSv4 opens preventing successful execution of a link, the server needs to recall any delegations that could hide the existence of opens relevant to that decision. The reason is that when a client holds a delegation, the server might not have an accurate account of the opens for that client, since the client may execute OPENs and CLOSEs locally. The LINK operation must be delayed only until a definitive result can be obtained. For example, suppose there are multiple delegations and one of them establishes an open whose presence would prevent the link. Given the server's semantics, NFS4ERR_FILE_OPEN may be returned to the caller as soon as that delegation is returned without waiting for other delegations to be returned. Similarly, if such opens are not associated with delegations, NFS4ERR_FILE_OPEN can be returned immediately with no delegation recall being done. </t> <t> If the current filehandle designates a directory for which another client holds a directory delegation, then, unless the delegation is such that the situation can be resolved by sending a notification, the delegationMUST<bcp14>MUST</bcp14> be recalled, and the operation cannot be performed successfully until the delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. </t> <t> When the current filehandle designates a directory for which one or more directory delegations exist, then, when those delegations request such notifications, instead of a recall, NOTIFY4_ADD_ENTRY will be generated as a result of the LINK operation. </t> <t> If the current file system supports the numlinks attribute, and other clients have delegations to the file being linked, then those delegationsMUST<bcp14>MUST</bcp14> be recalled and the LINK operationMUST NOT<bcp14>MUST NOT</bcp14> proceed until all delegations are returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. </t> <t> Changes to any property of the "hard" linked files are reflected in all of the linked files. When a link is made to a file, the attributes for the file should have a value for numlinks that is one greater than the value before the LINK operation. </t> <t> The statement "file and the target directory must reside within the same file system on the server" means that the fsid fields in the attributes for the objects are the same. If they reside on different file systems, the error NFS4ERR_XDEV is returned. This error may be returned by some servers when there is an internal partitioning of a file system that the LINK operation would violate. </t> <t> On some servers, "." and ".." are illegal values for newname and the error NFS4ERR_BADNAME will be returned if they are specified. </t> <t> When the current filehandle designates a named attribute directory and the object to be linked (the saved filehandle) is not a named attribute for the same object, the error NFS4ERR_XDEVMUST<bcp14>MUST</bcp14> be returned. When the saved filehandle designates a named attribute and the current filehandle is not the appropriate named attribute directory, the error NFS4ERR_XDEVMUST<bcp14>MUST</bcp14> also be returned. </t> <t> When the current filehandle designates a named attribute directory and the object to be linked (the saved filehandle) is a named attribute within that directory, the server may return the error NFS4ERR_NOTSUPP. </t> <t> In the case that newname is already linked to the file represented by the saved filehandle, the server will return NFS4ERR_EXIST. </t> <t> Note that symbolic links are created with the CREATE operation. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LOCK"title="Operationnumbered="true" toc="default"> <name>Operation 12: LOCK - CreateLock" >Lock</name> <section toc="exclude" anchor="OP_LOCK_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* * For LOCK, transition from open_stateid and lock_owner * to a lock stateid. */ struct open_to_lock_owner4 { seqid4 open_seqid; stateid4 open_stateid; seqid4 lock_seqid; lock_owner4 lock_owner; }; /* * For LOCK, existing lock stateid continues to request new * file lock for the same lock_owner and open_stateid. */ struct exist_lock_owner4 { stateid4 lock_stateid; seqid4 lock_seqid; }; union locker4 switch (bool new_lock_owner) { case TRUE: open_to_lock_owner4 open_owner; case FALSE: exist_lock_owner4 lock_owner; }; /* * LOCK/LOCKT/LOCKU: Record lock management */ struct LOCK4args { /* CURRENT_FH: file */ nfs_lock_type4 locktype; bool reclaim; offset4 offset; length4 length; locker4 locker;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOCK_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct LOCK4denied { offset4 offset; length4 length; nfs_lock_type4 locktype; lock_owner4 owner; }; struct LOCK4resok { stateid4 lock_stateid; }; union LOCK4res switch (nfsstat4 status) { case NFS4_OK: LOCK4resok resok4; case NFS4ERR_DENIED: LOCK4denied denied; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOCK_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LOCK operation requests a byte-range lock for the byte-range specified by the offset and length parameters, and lock type specified in the locktype parameter. If this is a reclaim request, the reclaim parameter will be TRUE. </t> <t> Bytes in a file may be locked even if those bytes are not currently allocated to the file. To lock the file from a specific offset through the end-of-file (no matter how long the file actually is) use a length field equal to NFS4_UINT64_MAX. The serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL under the following combinations of length and offset:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Length is equal to zero.</t> <t></li> <li> Length is not equal to NFS4_UINT64_MAX, and the sum of length and offset exceeds NFS4_UINT64_MAX.</t> </list> </t></li> </ul> <t> 32-bit servers are servers that support locking for byte offsets that fit within 32 bits (i.e., less than or equal to NFS4_UINT32_MAX). If the client specifies a range that overlaps one or more bytes beyond offset NFS4_UINT32_MAX but does not end at offset NFS4_UINT64_MAX, then such a 32-bit serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_BAD_RANGE. </t> <t> If the server returns NFS4ERR_DENIED, the owner, offset, and length of a conflicting lock are returned. </t> <t> The locker argument specifies the lock-owner that is associated with the LOCK operation. The locker4 structure is a switched union that indicates whether the client has already created byte-range locking state associated with the current open file and lock-owner. In the case in which it has, the argument is just a stateid representing the set of locks associated with that open file and lock-owner, together with a lock_seqid value thatMAY<bcp14>MAY</bcp14> be any value andMUST<bcp14>MUST</bcp14> be ignored by the server. In the case where no byte-range locking state has been established, or the client does not have the stateid available, the argument contains the stateid of the open file with which this lock is to be associated, together with the lock-owner with which the lock is to be associated. The open_to_lock_owner case covers the very first lock done by a lock-owner for a given open file and offers a method to use the established state of the open_stateid to transition to the use of a lock stateid. </t> <t> The following fields of the locker parameterMAY<bcp14>MAY</bcp14> be set to any value by the client andMUST<bcp14>MUST</bcp14> be ignored by the server:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The clientid field of the lock_owner field of the open_owner field (locker.open_owner.lock_owner.clientid). The reason the serverMUST<bcp14>MUST</bcp14> ignore the clientid field is that the serverMUST<bcp14>MUST</bcp14> derive the client ID from the session ID from the SEQUENCE operation of the COMPOUND request.</t> <t></li> <li> The open_seqid and lock_seqid fields of the open_owner field (locker.open_owner.open_seqid and locker.open_owner.lock_seqid).</t> <t></li> <li> The lock_seqid field of the lock_owner field (locker.lock_owner.lock_seqid).</t> </list> </t></li> </ul> <t> Note that the client ID appearing in a LOCK4denied structure is the actual client associated with the conflicting lock, whether this is the client ID associated with the current session or a different one. Thus, if the server returns NFS4ERR_DENIED, itMUST<bcp14>MUST</bcp14> set the clientid field of the owner field of the denied field. </t> <t> If the current filehandle is not an ordinary file, an error will be returned to the client. In the case that the current filehandle represents an object of type NF4DIR, NFS4ERR_ISDIR is returned. If the current filehandle designates a symbolic link, NFS4ERR_SYMLINK is returned. In all other cases, NFS4ERR_WRONG_TYPE is returned. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_LOCK_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the server is unable to determine the exact offset and length of the conflicting byte-range lock, the same offset and length that were provided in the arguments should be returned in the denied results. </t> <t> LOCK operations are subject to permission checks and to checks against the access type of the associated file. However, the specific right and modes required for various types of locks reflect the semantics of the server-exported file system, and are not specified by the protocol. For example, Windows 2000 allows a write lock of a file open for read access, while a POSIX-compliant system does not. </t> <t> When the client sends a LOCK operation that corresponds to a range that the lock-owner has locked already (with the same or different lock type), or to a sub-range of such a range, or to a byte-range that includes multiple locks already granted to that lock-owner, in whole or in part, and the server does not support such locking operations (i.e., does not support POSIX locking semantics), the server will return the error NFS4ERR_LOCK_RANGE. In that case, the client may return an error, or it may emulate the required operations, using only LOCK for ranges that do not include any bytes already locked by that lock-owner and LOCKU of locks held by that lock-owner (specifying an exactly matching range and type). Similarly, when the client sends a LOCK operation that amounts to upgrading (changing from a READ_LT lock to a WRITE_LT lock) or downgrading (changing from WRITE_LT lock to a READ_LT lock) an existing byte-range lock, and the server does not support such a lock, the server will return NFS4ERR_LOCK_NOTSUPP. Such operations may not perfectly reflect the required semantics in the face of conflicting LOCK operations from other clients. </t> <t> When a client holds an OPEN_DELEGATE_WRITE delegation, the client holding that delegation is assured that there are no opens by other clients. Thus, there can be no conflicting LOCK operations from such clients. Therefore, the client may be handling locking requests locally, without doing LOCK operations on the server. If it does that, it must be prepared to update the lock status on the server, by sending appropriate LOCK and LOCKU operations before returning the delegation. </t> <t> When one or more clients hold OPEN_DELEGATE_READ delegations, any LOCK operation where the server is implementing mandatory locking semanticsMUST<bcp14>MUST</bcp14> result in the recall of all such delegations. The LOCK operation may not be granted until all such delegations are returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while the delegation remains outstanding. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LOCKT"title="Operationnumbered="true" toc="default"> <name>Operation 13: LOCKT - Test forLock" >Lock</name> <section toc="exclude" anchor="OP_LOCKT_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct LOCKT4args { /* CURRENT_FH: file */ nfs_lock_type4 locktype; offset4 offset; length4 length; lock_owner4 owner;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOCKT_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ union LOCKT4res switch (nfsstat4 status) { case NFS4ERR_DENIED: LOCK4denied denied; case NFS4_OK: void; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOCKT_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LOCKT operation tests the lock as specified in the arguments. If a conflicting lock exists, the owner, offset, length, and type of the conflicting lock are returned. The owner field in the results includes the client ID of the owner of the conflicting lock, whether this is the client ID associated with the current session or a different client ID. If no lock is held, nothing other than NFS4_OK is returned. Lock types READ_LT and READW_LT are processed in the same way in that a conflicting lock test is done without regard to blocking or non-blocking. The same is true for WRITE_LT and WRITEW_LT. </t> <t> The ranges are specified as for LOCK. The NFS4ERR_INVAL and NFS4ERR_BAD_RANGE errors are returned under the same circumstances as for LOCK. </t> <t> The clientid field of the ownerMAY<bcp14>MAY</bcp14> be set to any value by the client andMUST<bcp14>MUST</bcp14> be ignored by the server. The reason the serverMUST<bcp14>MUST</bcp14> ignore the clientid field is that the serverMUST<bcp14>MUST</bcp14> derive the client ID from the session ID from the SEQUENCE operation of the COMPOUND request. </t> <t> If the current filehandle is not an ordinary file, an error will be returned to the client. In the case that the current filehandle represents an object of type NF4DIR, NFS4ERR_ISDIR is returned. If the current filehandle designates a symbolic link, NFS4ERR_SYMLINK is returned. In all other cases, NFS4ERR_WRONG_TYPE is returned. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_LOCKT_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the server is unable to determine the exact offset and length of the conflicting lock, the same offset and length that were provided in the arguments should be returned in the denied results. </t> <t> LOCKT uses a lock_owner4 rather a stateid4, as is used in LOCK to identify the owner. This is because the client does not have to open the file to test for the existence of a lock, so a stateid might not be available. </t> <t> As noted in <xreftarget="OP_LOCK_IMPLEMENTATION"/>,target="OP_LOCK_IMPLEMENTATION" format="default"/>, some servers may return NFS4ERR_LOCK_RANGE to certain (otherwise non-conflicting) LOCK operations that overlap ranges already granted to the current lock-owner. </t> <t> The LOCKT operation's test for conflicting locksSHOULD<bcp14>SHOULD</bcp14> exclude locks for the current lock-owner, and thus should return NFS4_OK in such cases. Note that this means that a server might return NFS4_OK to a LOCKT request even though a LOCK operation for the same range and lock-owner would fail with NFS4ERR_LOCK_RANGE. </t> <t> When a client holds an OPEN_DELEGATE_WRITE delegation, it may choose (see <xref target="OP_LOCK_IMPLEMENTATION"/>)format="default"/>) to handle LOCK requests locally. In such a case, LOCKT requests will similarly be handled locally. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LOCKU"title="Operationnumbered="true" toc="default"> <name>Operation 14: LOCKU - UnlockFile" >File</name> <section toc="exclude" anchor="OP_LOCKU_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct LOCKU4args { /* CURRENT_FH: file */ nfs_lock_type4 locktype; seqid4 seqid; stateid4 lock_stateid; offset4 offset; length4 length;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOCKU_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ union LOCKU4res switch (nfsstat4 status) { case NFS4_OK: stateid4 lock_stateid; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOCKU_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LOCKU operation unlocks the byte-range lock specified by the parameters. The client may set the locktype field to any value that is legal for the nfs_lock_type4 enumerated type, and the serverMUST<bcp14>MUST</bcp14> accept any legal value for locktype. Any legal value for locktype has no effect on the success or failure of the LOCKU operation. </t> <t> The ranges are specified as for LOCK. The NFS4ERR_INVAL and NFS4ERR_BAD_RANGE errors are returned under the same circumstances as for LOCK. </t> <t> The seqid parameterMAY<bcp14>MAY</bcp14> be any value and the serverMUST<bcp14>MUST</bcp14> ignore it. </t> <t> If the current filehandle is not an ordinary file, an error will be returned to the client. In the case that the current filehandle represents an object of type NF4DIR, NFS4ERR_ISDIR is returned. If the current filehandle designates a symbolic link, NFS4ERR_SYMLINK is returned. In all other cases, NFS4ERR_WRONG_TYPE is returned. </t> <t> On success, the current filehandle retains its value. </t> <t> The serverMAY<bcp14>MAY</bcp14> require that the principal, security flavor, and if applicable, the GSS mechanism, combination that sent a LOCK operation also be the one to send LOCKU on the file. This might not be possible if credentials for the principal are no longer available. The serverMAY<bcp14>MAY</bcp14> allow the machine credential or SSV credential (see <xref target="OP_EXCHANGE_ID"/>)format="default"/>) to send LOCKU. </t> </section> <section toc="exclude" anchor="OP_LOCKU_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the area to be unlocked does not correspond exactly to a lock actually held by the lock-owner, the server may return the error NFS4ERR_LOCK_RANGE. This includes the case in which the area is not locked, where the area is a sub-range of the area locked, where it overlaps the area locked without matching exactly, or the area specified includes multiple locks held by the lock-owner. In all of these cases, allowed by <xreftarget="fcntl">POSIXtarget="fcntl" format="default">POSIX locking</xref> semantics, a client receiving this error should, if it desires support for such operations, simulate the operation using LOCKU on ranges corresponding to locks it actually holds, possibly followed by LOCK operations for the sub-ranges not being unlocked. </t> <t> When a client holds an OPEN_DELEGATE_WRITE delegation, it may choose (see <xref target="OP_LOCK_IMPLEMENTATION"/>)format="default"/>) to handle LOCK requests locally. In such a case, LOCKU operations will similarly be handled locally. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LOOKUP"title="Operationnumbered="true" toc="default"> <name>Operation 15: LOOKUP - LookupFilename" >Filename</name> <section toc="exclude" anchor="OP_LOOKUP_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct LOOKUP4args { /* CURRENT_FH: directory */ component4 objname;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOOKUP_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct LOOKUP4res { /* New CURRENT_FH: object */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOOKUP_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LOOKUP operation looks up or finds a file system object using the directory specified by the current filehandle. LOOKUP evaluates the component and if the object exists, the current filehandle is replaced with the component's filehandle. </t> <t> If the component cannot be evaluated either because it does not exist or because the client does not have permission to evaluate the component, then an error will be returned and the current filehandle will be unchanged. </t> <t> If the component is a zero-length string or if any component does not obey the UTF-8 definition, the error NFS4ERR_INVAL will be returned. </t> </section> <section toc="exclude" anchor="OP_LOOKUP_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the client wants to achieve the effect of a multi-component look up, it may construct a COMPOUND request such as (and obtain each filehandle):<figure> <artwork></t> <sourcecode type="nfsv4compound"><![CDATA[ PUTFH (directory filehandle) LOOKUP "pub" GETFH LOOKUP "foo" GETFH LOOKUP "bar"GETFH </artwork> </figure>GETFH]]></sourcecode> <t> Unlike NFSv3, NFSv4.1 allows LOOKUP requests to cross mountpoints on the server. The client can detect a mountpoint crossing by comparing the fsid attribute of the directory with the fsid attribute of the directory looked up. If the fsids are different, then the new directory is a server mountpoint. UNIX clients that detect a mountpoint crossing will need to mount the server's file system. This needs to be done to maintain the file object identity checking mechanisms common to UNIX clients. </t> <t> Servers that limit NFS access to "shared" or "exported" file systems should provide a pseudo file system into which the exported file systems can be integrated, so that clients can browse the server's namespace. The clients view of a pseudo file system will be limited to paths that lead to exported file systems. </t> <t> Note: previous versions of the protocol assigned special semantics to the names "." and "..". NFSv4.1 assigns no special semantics to these names. The LOOKUPP operator must be used to look up a parent directory. </t> <t> Note that this operation does not follow symbolic links. The client is responsible for all parsing of filenames including filenames that are modified by symbolic links encountered during the look up process. </t> <t> If the current filehandle supplied is not a directory but a symbolic link, the error NFS4ERR_SYMLINK is returned as the error. For all other non-directory file types, the error NFS4ERR_NOTDIR is returned. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LOOKUPP"title="Operationnumbered="true" toc="default"> <name>Operation 16: LOOKUPP - Lookup ParentDirectory" >Directory</name> <section toc="exclude" anchor="OP_LOOKUPP_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* CURRENT_FH: object */void; </artwork> </figure>void;]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOOKUPP_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct LOOKUPP4res { /* new CURRENT_FH: parent directory */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LOOKUPP_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The current filehandle is assumed to refer to a regular directory or a named attribute directory. LOOKUPP assigns the filehandle for its parent directory to be the current filehandle. If there is no parent directory, an NFS4ERR_NOENT error must be returned. Therefore, NFS4ERR_NOENT will be returned by the server when the current filehandle is at the root or top of the server's file tree. </t> <t> As is the case with LOOKUP, LOOKUPP will also cross mountpoints. </t> <t> If the current filehandle is not a directory or named attribute directory, the error NFS4ERR_NOTDIR is returned. </t> <t> If the requester's security flavor does not match that configured for the parent directory, then the serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_WRONGSEC (a future minor revision of NFSv4 may upgrade this toMUST)<bcp14>MUST</bcp14>) in the LOOKUPP response. However, if the server does so, itMUST<bcp14>MUST</bcp14> support the SECINFO_NO_NAME operation (<xreftarget="OP_SECINFO_NO_NAME"/>),target="OP_SECINFO_NO_NAME" format="default"/>), so that the client can gracefully determine the correct security flavor. </t> <t> If the current filehandle is a named attribute directory that is associated with a file system object via OPENATTR (i.e., not a sub-directory of a named attribute directory), LOOKUPPSHOULD<bcp14>SHOULD</bcp14> return the filehandle of the associated file system object. </t> </section> <section toc="exclude" anchor="OP_LOOKUPP_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> An issue to note is upward navigation from named attribute directories. The named attribute directories are essentially detached from the namespace, and this property should be safely represented in the client operating environment. LOOKUPP on a named attribute directory may return the filehandle of the associated file, and conveying this to applications might be unsafe as many applications expect the parent of an object to always be a directory. Therefore, the client may want to hide the parent of named attribute directories (represented as ".." in UNIX) or represent the named attribute directory as its own parent (as is typically done for the file system root directory in UNIX). </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_NVERIFY"title="Operationnumbered="true" toc="default"> <name>Operation 17: NVERIFY - Verify Difference inAttributes" >Attributes</name> <section toc="exclude" anchor="OP_NVERIFY_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct NVERIFY4args { /* CURRENT_FH: object */ fattr4 obj_attributes;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_NVERIFY_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct NVERIFY4res { nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_NVERIFY_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is used to prefix a sequence of operations to be performed if one or more attributes have changed on some file system object. If all the attributes match, then the error NFS4ERR_SAMEMUST<bcp14>MUST</bcp14> be returned. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_NVERIFY_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> This operation is useful as a cache validation operator. If the object to which the attributes belong has changed, then the following operations may obtain new data associated with that object, for instance, to check if a file has been changed and obtain new data if it has:<figure> <artwork></t> <sourcecode type="nfsv4compound"><![CDATA[ SEQUENCE PUTFH fh NVERIFY attrbits attrs READ 032767 </artwork> </figure>32767]]></sourcecode> <t> Contrast this with NFSv3, which would first send a GETATTR in one request/reply round trip, and then if attributes indicated that the client's cache was stale, then send a READ in another request/reply round trip. </t> <t> In the case that aRECOMMENDED<bcp14>RECOMMENDED</bcp14> attribute is specified in the NVERIFY operation and the server does not support that attribute for the file system object, the error NFS4ERR_ATTRNOTSUPP is returned to the client. </t> <t> When the attribute rdattr_error or any set-only attribute (e.g., time_modify_set) is specified, the error NFS4ERR_INVAL is returned to the client. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_OPEN"title="Operationnumbered="true" toc="default"> <name>Operation 18: OPEN - Open a RegularFile" >File</name> <section toc="exclude" anchor="OP_OPEN_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* * Various definitions for OPEN */ enum createmode4 { UNCHECKED4 = 0, GUARDED4 = 1, /* Deprecated in NFSv4.1. */ EXCLUSIVE4 = 2, /* * New to NFSv4.1. If session is persistent, * GUARDED4 MUST be used. Otherwise, use * EXCLUSIVE4_1 instead of EXCLUSIVE4. */ EXCLUSIVE4_1 = 3 }; struct creatverfattr { verifier4 cva_verf; fattr4 cva_attrs; }; union createhow4 switch (createmode4 mode) { case UNCHECKED4: case GUARDED4: fattr4 createattrs; case EXCLUSIVE4: verifier4 createverf; case EXCLUSIVE4_1: creatverfattr ch_createboth; }; enum opentype4 { OPEN4_NOCREATE = 0, OPEN4_CREATE = 1 }; union openflag4 switch (opentype4 opentype) { case OPEN4_CREATE: createhow4 how; default: void; }; /* Next definitions used for OPEN delegation */ enum limit_by4 { NFS_LIMIT_SIZE = 1, NFS_LIMIT_BLOCKS = 2 /* others as needed */ }; struct nfs_modified_limit4 { uint32_t num_blocks; uint32_t bytes_per_block; }; union nfs_space_limit4 switch (limit_by4 limitby) { /* limit specified as file size */ case NFS_LIMIT_SIZE: uint64_t filesize; /* limit specified by number of blocks */ case NFS_LIMIT_BLOCKS: nfs_modified_limit4 mod_blocks; } ; /* * Share Access and Deny constants for open argument */ const OPEN4_SHARE_ACCESS_READ = 0x00000001; const OPEN4_SHARE_ACCESS_WRITE = 0x00000002; const OPEN4_SHARE_ACCESS_BOTH = 0x00000003; const OPEN4_SHARE_DENY_NONE = 0x00000000; const OPEN4_SHARE_DENY_READ = 0x00000001; const OPEN4_SHARE_DENY_WRITE = 0x00000002; const OPEN4_SHARE_DENY_BOTH = 0x00000003; /* new flags for share_access field of OPEN4args */ const OPEN4_SHARE_ACCESS_WANT_DELEG_MASK = 0xFF00; const OPEN4_SHARE_ACCESS_WANT_NO_PREFERENCE = 0x0000; const OPEN4_SHARE_ACCESS_WANT_READ_DELEG = 0x0100; const OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG = 0x0200; const OPEN4_SHARE_ACCESS_WANT_ANY_DELEG = 0x0300; const OPEN4_SHARE_ACCESS_WANT_NO_DELEG = 0x0400; const OPEN4_SHARE_ACCESS_WANT_CANCEL = 0x0500; const OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL = 0x10000; const OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED = 0x20000; enum open_delegation_type4 { OPEN_DELEGATE_NONE = 0, OPEN_DELEGATE_READ = 1, OPEN_DELEGATE_WRITE = 2, OPEN_DELEGATE_NONE_EXT = 3 /* new to v4.1 */ }; enum open_claim_type4 { /* * Not a reclaim. */ CLAIM_NULL = 0, CLAIM_PREVIOUS = 1, CLAIM_DELEGATE_CUR = 2, CLAIM_DELEGATE_PREV = 3, /* * Not a reclaim. * * Like CLAIM_NULL, but object identified * by the current filehandle. */ CLAIM_FH = 4, /* new to v4.1 */ /* * Like CLAIM_DELEGATE_CUR, but object identified * by current filehandle. */ CLAIM_DELEG_CUR_FH = 5, /* new to v4.1 */ /* * Like CLAIM_DELEGATE_PREV, but object identified * by current filehandle. */ CLAIM_DELEG_PREV_FH = 6 /* new to v4.1 */ }; struct open_claim_delegate_cur4 { stateid4 delegate_stateid; component4 file; }; union open_claim4 switch (open_claim_type4 claim) { /* * No special rights to file. * Ordinary OPEN of the specified file. */ case CLAIM_NULL: /* CURRENT_FH: directory */ component4 file; /* * Right to the file established by an * open previous to server reboot. File * identified by filehandle obtained at * that time rather than by name. */ case CLAIM_PREVIOUS: /* CURRENT_FH: file being reclaimed */ open_delegation_type4 delegate_type; /* * Right to file based on a delegation * granted by the server. File is * specified by name. */ case CLAIM_DELEGATE_CUR: /* CURRENT_FH: directory */ open_claim_delegate_cur4 delegate_cur_info; /* * Right to file based on a delegation * granted to a previous boot instance * of the client. File is specified by name. */ case CLAIM_DELEGATE_PREV: /* CURRENT_FH: directory */ component4 file_delegate_prev; /* * Like CLAIM_NULL. No special rights * to file. Ordinary OPEN of the * specified file by current filehandle. */ case CLAIM_FH: /* new to v4.1 */ /* CURRENT_FH: regular file to open */ void; /* * Like CLAIM_DELEGATE_PREV. Right to file based on a * delegation granted to a previous boot * instance of the client. File is identifiedby* by filehandle. */ case CLAIM_DELEG_PREV_FH: /* new to v4.1 */ /* CURRENT_FH: file being opened */ void; /* * Like CLAIM_DELEGATE_CUR. Right to file based on * a delegation granted by the server. * File is identified by filehandle. */ case CLAIM_DELEG_CUR_FH: /* new to v4.1 */ /* CURRENT_FH: file being opened */ stateid4 oc_delegate_stateid; }; /* * OPEN: Open a file, potentially receiving an OPEN delegation */ struct OPEN4args { seqid4 seqid; uint32_t share_access; uint32_t share_deny; open_owner4 owner; openflag4 openhow; open_claim4 claim;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_OPEN_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct open_read_delegation4 { stateid4 stateid; /* Stateid for delegation*/ bool recall; /* Pre-recalled flag for delegations obtained by reclaim (CLAIM_PREVIOUS) */ nfsace4 permissions; /* Defines users who don't need an ACCESS call to open for read */ }; struct open_write_delegation4 { stateid4 stateid; /* Stateid for delegation */ bool recall; /* Pre-recalled flag for delegations obtained by reclaim (CLAIM_PREVIOUS) */ nfs_space_limit4 space_limit; /* Defines condition that the client must check to determine whether the file needs to be flushed to the server on close. */ nfsace4 permissions; /* Defines users who don't need an ACCESS call as part of a delegated open. */ }; enum why_no_delegation4 { /* new to v4.1 */ WND4_NOT_WANTED = 0, WND4_CONTENTION = 1, WND4_RESOURCE = 2, WND4_NOT_SUPP_FTYPE = 3, WND4_WRITE_DELEG_NOT_SUPP_FTYPE = 4, WND4_NOT_SUPP_UPGRADE = 5, WND4_NOT_SUPP_DOWNGRADE = 6, WND4_CANCELLED = 7, WND4_IS_DIR = 8 }; union open_none_delegation4 /* new to v4.1 */ switch (why_no_delegation4 ond_why) { case WND4_CONTENTION: bool ond_server_will_push_deleg; case WND4_RESOURCE: bool ond_server_will_signal_avail; default: void; }; union open_delegation4 switch (open_delegation_type4 delegation_type) { case OPEN_DELEGATE_NONE: void; case OPEN_DELEGATE_READ: open_read_delegation4 read; case OPEN_DELEGATE_WRITE: open_write_delegation4 write; case OPEN_DELEGATE_NONE_EXT: /* new to v4.1 */ open_none_delegation4 od_whynone; }; /* * Result flags */ /* Client must confirm open */ const OPEN4_RESULT_CONFIRM = 0x00000002; /* Type of file locking behavior at the server */ const OPEN4_RESULT_LOCKTYPE_POSIX = 0x00000004; /* Server will preserve file if removed while open */ const OPEN4_RESULT_PRESERVE_UNLINKED = 0x00000008; /* * Server may use CB_NOTIFY_LOCK on locks * derived from this open */ const OPEN4_RESULT_MAY_NOTIFY_LOCK = 0x00000020; struct OPEN4resok { stateid4 stateid; /* Stateid for open */ change_info4 cinfo; /* Directory Change Info */ uint32_t rflags; /* Result flags */ bitmap4 attrset; /* attribute set for create*/ open_delegation4 delegation; /* Info on any open delegation */ }; union OPEN4res switch (nfsstat4 status) { case NFS4_OK: /* New CURRENT_FH: opened file */ OPEN4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_OPEN_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The OPEN operation opens a regular file in a directory with the provided name or filehandle. OPEN can also create a file if a name is provided, and the client specifies it wants to create a file. Specification of whether or not a file is to be created, and the method of creation is via the openhow parameter. The openhow parameter consists of a switched union (data type opengflag4), which switches on the value of opentype (OPEN4_NOCREATE or OPEN4_CREATE). If OPEN4_CREATE is specified, this leads to another switched union (data type createhow4) that supports four cases of creation methods: UNCHECKED4, GUARDED4, EXCLUSIVE4, or EXCLUSIVE4_1. If opentype is OPEN4_CREATE, then the claim field of the claim fieldMUST<bcp14>MUST</bcp14> be one of CLAIM_NULL, CLAIM_DELEGATE_CUR, or CLAIM_DELEGATE_PREV, because these claim methods include a component of a file name. </t> <t> Upon success (which might entail creation of a new file), the current filehandle is replaced by that of the created or existing object. </t> <t> If the current filehandle is a named attribute directory, OPEN will then create or open a named attribute file. Note that exclusive create of a named attribute is not supported. If the createmode is EXCLUSIVE4 or EXCLUSIVE4_1 and the current filehandle is a named attribute directory, the server will return EINVAL. </t> <t> UNCHECKED4 means that the file should be created if a file of that name does not exist and encountering an existing regular file of that name is not an error. For this type of create, createattrs specifies the initial set of attributes for the file. The set of attributes may include any writable attribute valid for regular files. When an UNCHECKED4 create encounters an existing file, the attributes specified by createattrs are not used, except that when createattrs specifies the size attribute with a size of zero, the existing file is truncated. </t> <t> If GUARDED4 is specified, the server checks for the presence of a duplicate object by name before performing the create. If a duplicate exists, NFS4ERR_EXIST is returned. If the object does not exist, the request is performed as described for UNCHECKED4. </t> <t> For the UNCHECKED4 and GUARDED4 cases, where the operation is successful, the server will return to the client an attribute mask signifying which attributes were successfully set for the object. </t> <t> EXCLUSIVE4_1 and EXCLUSIVE4 specify that the server is to follow exclusive creation semantics, using the verifier to ensure exclusive creation of the target. The server should check for the presence of a duplicate object by name. If the object does not exist, the server creates the object and stores the verifier with the object. If the object does exist and the stored verifier matches the client provided verifier, the server uses the existing object as the newly created object. If the stored verifier does not match, then an error of NFS4ERR_EXIST is returned. </t> <t> If using EXCLUSIVE4, and if the server uses attributes to store the exclusive create verifier, the server will signify which attributes it used by setting the appropriate bits in the attribute mask that is returned in the results. Unlike UNCHECKED4, GUARDED4, and EXCLUSIVE4_1, EXCLUSIVE4 does not support the setting of attributes at file creation, and after a successful OPEN via EXCLUSIVE4, the clientMUST<bcp14>MUST</bcp14> send a SETATTR to set attributes to a known state. </t> <t> In NFSv4.1, EXCLUSIVE4 has been deprecated in favor of EXCLUSIVE4_1. Unlike EXCLUSIVE4, attributes may be provided in the EXCLUSIVE4_1 case, but because the server may use attributes of the target object to store the verifier, the set of allowable attributes may be fewer than the set of attributes SETATTR allows. The allowable attributes for EXCLUSIVE4_1 are indicated in the suppattr_exclcreat (<xreftarget="attrdef_suppattr_exclcreat"/>)target="attrdef_suppattr_exclcreat" format="default"/>) attribute. If the client attempts to set in cva_attrs an attribute that is not in suppattr_exclcreat, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. The response field, attrset, indicates both which attributes the server set from cva_attrs and which attributes the server used to store the verifier. As described in <xreftarget="OP_OPEN_IMPLEMENTATION"/>,target="OP_OPEN_IMPLEMENTATION" format="default"/>, the client can compare cva_attrs.attrmask with attrset to determine which attributes were used to store the verifier. </t> <t> With the addition of persistent sessions and pNFS, under some conditions EXCLUSIVE4MUST NOT<bcp14>MUST NOT</bcp14> be used by the client or supported by the server. The following table summarizes the appropriate and mandated exclusive create methods for implementations of NFSv4.1: </t><texttable anchor='exclusive_create'> <preamble> Required methods for exclusive create </preamble> <ttcol>Persistent<table anchor="exclusive_create" align="center"> <name>Required Methods for Exclusive Create</name> <thead> <tr> <th align="left">Persistent Reply CacheEnabled</ttcol> <ttcol>ServerEnabled</th> <th align="left">Server SupportspNFS</ttcol> <ttcol>Server REQUIRED</ttcol> <ttcol>Client Allowed</ttcol> <c>no</c> <c>no</c> <c>EXCLUSIVE4_1 and EXCLUSIVE4</c> <c>EXCLUSIVE4_1 (SHOULD)pNFS</th> <th align="left">Server <bcp14>REQUIRED</bcp14></th> <th align="left">Client Allowed</th> </tr> </thead> <tbody> <tr> <td align="left">no</td> <td align="left">no</td> <td align="left">EXCLUSIVE4_1 and EXCLUSIVE4</td> <td align="left">EXCLUSIVE4_1 (<bcp14>SHOULD</bcp14>) or EXCLUSIVE4(SHOULD NOT)</c> <c>no</c> <c>yes</c> <c>EXCLUSIVE4_1</c> <c>EXCLUSIVE4_1</c> <c>yes</c> <c>no</c> <c>GUARDED4</c> <c>GUARDED4</c> <c>yes</c> <c>yes</c> <c>GUARDED4</c> <c>GUARDED4</c> </texttable>(<bcp14>SHOULD NOT</bcp14>)</td> </tr> <tr> <td align="left">no</td> <td align="left">yes</td> <td align="left">EXCLUSIVE4_1</td> <td align="left">EXCLUSIVE4_1</td> </tr> <tr> <td align="left">yes</td> <td align="left">no</td> <td align="left">GUARDED4</td> <td align="left">GUARDED4</td> </tr> <tr> <td align="left">yes</td> <td align="left">yes</td> <td align="left">GUARDED4</td> <td align="left">GUARDED4</td> </tr> </tbody> </table> <t> If CREATE_SESSION4_FLAG_PERSIST is set in the results of CREATE_SESSION, the reply cache is persistent (see <xreftarget="OP_CREATE_SESSION"/>).target="OP_CREATE_SESSION" format="default"/>). If the EXCHGID4_FLAG_USE_PNFS_MDS flag is set in the results from EXCHANGE_ID, the server is a pNFS server (see <xreftarget="OP_EXCHANGE_ID"/>).target="OP_EXCHANGE_ID" format="default"/>). If the client attempts to use EXCLUSIVE4 on a persistent session, or a session derived from an EXCHGID4_FLAG_USE_PNFS_MDS client ID, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t> <t> With persistent sessions, exclusive create semantics are fully achievable via GUARDED4, and so EXCLUSIVE4 or EXCLUSIVE4_1MUST NOT<bcp14>MUST NOT</bcp14> be used. When pNFS is being used, the layout_hint attribute might not be supported after the file is created. Only the EXCLUSIVE4_1 and GUARDED methods of exclusive file creation allow the atomic setting of attributes. </t> <t> For the target directory, the server returns change_info4 information in cinfo. With the atomic field of the change_info4 data type, the server will indicate if the before and after change attributes were obtained atomically with respect to the link creation. </t> <t> The OPEN operation provides for Windows share reservation capability with the use of the share_access and share_deny fields of the OPEN arguments. The client specifies at OPEN the required share_access and share_deny modes. For clients that do not directly support SHAREs (i.e., UNIX), the expected deny value is OPEN4_SHARE_DENY_NONE. In the case that there is an existing SHARE reservation that conflicts with the OPEN request, the server returns the error NFS4ERR_SHARE_DENIED. For additional discussion of SHARE semantics, see <xref target="share_reserve"/>.format="default"/>. </t> <t> For each OPEN, the client provides a value for the owner field of the OPEN argument. The owner field is of data type open_owner4, and contains a field called clientid and a field called owner. The client can set the clientid field to any value and the serverMUST<bcp14>MUST</bcp14> ignore it. Instead, the serverMUST<bcp14>MUST</bcp14> derive the client ID from the session ID of the SEQUENCE operation of the COMPOUND request. </t> <t> The "seqid" field of the request is not used in NFSv4.1, but itMAY<bcp14>MAY</bcp14> be any value and the serverMUST<bcp14>MUST</bcp14> ignore it. </t> <t> In the case that the client is recovering state from a server failure, the claim field of the OPEN argument is used to signify that the request is meant to reclaim state previously held. </t> <t> The "claim" field of the OPEN argument is used to specify the file to be opened and the state information that the client claims to possess. There are seven claim types as follows: </t><texttable> <ttcol align='left'>open type</ttcol> <ttcol align='left'>description</ttcol> <c><table align="center"> <thead> <tr> <th align="left">open type</th> <th align="left">description</th> </tr> </thead> <tbody> <tr> <td align="left"> CLAIM_NULL, CLAIM_FH</c> <c></td> <td align="left"> For the client, this is a new OPEN request and there is no previous state associated with the file for the client. With CLAIM_NULL, the file is identified by the current filehandle and the specified component name. With CLAIM_FH (new to NFSv4.1), the file is identified by just the current filehandle.</c> <c></td> </tr> <tr> <td align="left"> CLAIM_PREVIOUS</c> <c></td> <td align="left"> The client is claiming basic OPEN state for a file that was held previous to a server restart. Generally used when a server is returning persistent filehandles; the client may not have the file name to reclaim the OPEN.</c> <c></td> </tr> <tr> <td align="left"> CLAIM_DELEGATE_CUR, CLAIM_DELEG_CUR_FH</c> <c></td> <td align="left"> The client is claiming a delegation for OPEN as granted by the server. Generally, this is done as part of recalling a delegation. With CLAIM_DELEGATE_CUR, the file is identified by the current filehandle and the specified component name. With CLAIM_DELEG_CUR_FH (new to NFSv4.1), the file is identified by just the current filehandle.</c> <c></td> </tr> <tr> <td align="left"> CLAIM_DELEGATE_PREV, CLAIM_DELEG_PREV_FH</c> <c></td> <td align="left"> The client is claiming a delegation granted to a previous client instance; used after the client restarts. The serverMAY<bcp14>MAY</bcp14> support CLAIM_DELEGATE_PREV and/or CLAIM_DELEG_PREV_FH (new to NFSv4.1). If it does support either claim type, CREATE_SESSIONMUST NOT<bcp14>MUST NOT</bcp14> remove the client's delegation state, and the serverMUST<bcp14>MUST</bcp14> support the DELEGPURGE operation.</c> </texttable></td> </tr> </tbody> </table> <t> For OPEN requests that reach the server during the grace period, the server returns an error of NFS4ERR_GRACE. The following claim types are exceptions:<list style='symbols'> <t></t> <ul spacing="normal"> <li> OPEN requests specifying the claim type CLAIM_PREVIOUS are devoted to reclaiming opens after a server restart and are typically only valid during the grace period.</t> <t></li> <li> OPEN requests specifying the claim types CLAIM_DELEGATE_CUR and CLAIM_DELEG_CUR_FH are valid both during and after the grace period. Since the granting of the delegation that they are subordinate to assures that there is no conflict with locks to be reclaimed by other clients, the server need not return NFS4ERR_GRACE when these are received during the grace period.</t> </list> </t></li> </ul> <t> For any OPEN request, the server may return an OPEN delegation, which allows further opens and closes to be handled locally on the client as described in <xreftarget="open_delegation"/>.target="open_delegation" format="default"/>. Note that delegation is up to the server to decide. The client should never assume that delegation will or will not be granted in a particular instance. It should always be prepared for either case. A partial exception is the reclaim (CLAIM_PREVIOUS) case, in which a delegation type is claimed. In this case, delegation will always be granted, although the server may specify an immediate recall in the delegation structure. </t> <t> The rflags returned by a successful OPEN allow the server to return information governing how the open file is to be handled.<list style="symbols"> <t></t> <ul spacing="normal"> <li> OPEN4_RESULT_CONFIRM is deprecated andMUST NOT<bcp14>MUST NOT</bcp14> be returned by an NFSv4.1 server.</t> <t></li> <li> OPEN4_RESULT_LOCKTYPE_POSIX indicates that the server's byte-range locking behavior supports the complete set of POSIX locking techniques <xreftarget="fcntl"/>.target="fcntl" format="default"/>. From this, the client can choose to manage byte-range locking state in a way to handle a mismatch of byte-range locking management.</t> <t></li> <li> OPEN4_RESULT_PRESERVE_UNLINKED indicates that the server will preserve the open file if the client (or any other client) removes the file as long as it is open. Furthermore, the server promises to preserve the file through the grace period after server restart, thereby giving the client the opportunity to reclaim its open.</t> <t></li> <li> OPEN4_RESULT_MAY_NOTIFY_LOCK indicates that the server may attempt CB_NOTIFY_LOCK callbacks for locks on this file. This flag is a hint only, and may be safely ignored by the client.</t> </list> </t></li> </ul> <t> If the component is of zero length, NFS4ERR_INVAL will be returned. The component is also subject to the normal UTF-8, character support, and name checks. See <xref target="utf8_related_errors"/>format="default"/> for further discussion. </t> <t> When an OPEN is done and the specified open-owner already has the resulting filehandle open, the result is to "OR" together the new share and deny status together with the existing status. In this case, only a single CLOSE need be done, even though multiple OPENs were completed. When such an OPEN is done, checking of share reservations for the new OPEN proceeds normally, with no exception for the existing OPEN held by the same open-owner. In this case, the stateid returned as an "other" field that matches that of the previous open while the "seqid" field is incremented to reflect the change status due to the new open. </t> <t> If the underlying file system at the server is only accessible in a read-only mode and the OPEN request has specified ACCESS_WRITE or ACCESS_BOTH, the server will return NFS4ERR_ROFS to indicate a read-only file system. </t> <t> As with the CREATE operation, the serverMUST<bcp14>MUST</bcp14> derive the owner, owner ACE, group, or group ACE if any of the four attributes are required and supported by the server's file system. For an OPEN with the EXCLUSIVE4 createmode, the server has no choice, since such OPEN calls do not include the createattrs field. Conversely, if createattrs (UNCHECKED4 or GUARDED4) or cva_attrs (EXCLUSIVE4_1) is specified, and includes an owner, owner_group, or ACE that the principal in the RPC call's credentials does not have authorization to create files for, then the server may return NFS4ERR_PERM. </t> <t> In the case of an OPEN that specifies a size of zero (e.g., truncation) and the file has named attributes, the named attributes are left as is and are not removed. </t> <t> NFSv4.1 gives more precise control to clients over acquisition of delegations via the following new flags for the share_access field of OPEN4args:<list style="hanging"> <t hangText="OPEN4_SHARE_ACCESS_WANT_READ_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_ANY_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_NO_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_CANCEL"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED"></t> </list></t> <t>OPEN4_SHARE_ACCESS_WANT_READ_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_ANY_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_NO_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_CANCEL</t> <t>OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL</t> <t>OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED</t> <t> If (share_access & OPEN4_SHARE_ACCESS_WANT_DELEG_MASK) is not zero, then the client will have specified one and only one of:<list style="hanging"> <t hangText="OPEN4_SHARE_ACCESS_WANT_READ_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_ANY_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_NO_DELEG"></t> <t hangText="OPEN4_SHARE_ACCESS_WANT_CANCEL"></t> </list></t> <t>OPEN4_SHARE_ACCESS_WANT_READ_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_ANY_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_NO_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_CANCEL</t> <t> Otherwise, the client is neither indicating a desire nor a non-desire for a delegation, and the serverMAY<bcp14>MAY</bcp14> orMAY<bcp14>MAY</bcp14> not return a delegation in the OPEN response. </t> <t> If the server supports the new _WANT_ flags and the client sends one or more of the new flags, then in the event the server does not return a delegation, itMUST<bcp14>MUST</bcp14> return a delegation type of OPEN_DELEGATE_NONE_EXT. The field ond_why in the reply indicates why no delegation was returned and will be one of:<list style="hanging"> <t hangText="WND4_NOT_WANTED"></t> <dl newline="true" spacing="normal"> <dt>WND4_NOT_WANTED</dt> <dd> The client specified OPEN4_SHARE_ACCESS_WANT_NO_DELEG.</t> <t hangText="WND4_CONTENTION"></dd> <dt>WND4_CONTENTION</dt> <dd> There is a conflicting delegation or open on the file.</t> <t hangText="WND4_RESOURCE"></dd> <dt>WND4_RESOURCE</dt> <dd> Resource limitations prevent the server from granting a delegation.</t> <t hangText="WND4_NOT_SUPP_FTYPE"></dd> <dt>WND4_NOT_SUPP_FTYPE</dt> <dd> The server does not support delegations on this file type.</t> <t hangText="WND4_WRITE_DELEG_NOT_SUPP_FTYPE"></dd> <dt>WND4_WRITE_DELEG_NOT_SUPP_FTYPE</dt> <dd> The server does not support OPEN_DELEGATE_WRITE delegations on this file type.</t> <t hangText="WND4_NOT_SUPP_UPGRADE"></dd> <dt>WND4_NOT_SUPP_UPGRADE</dt> <dd> The server does not support atomic upgrade of an OPEN_DELEGATE_READ delegation to an OPEN_DELEGATE_WRITE delegation.</t> <t hangText="WND4_NOT_SUPP_DOWNGRADE"></dd> <dt>WND4_NOT_SUPP_DOWNGRADE</dt> <dd> The server does not support atomic downgrade of an OPEN_DELEGATE_WRITE delegation to an OPEN_DELEGATE_READ delegation.</t> <t hangText="WND4_CANCELED"></dd> <dt>WND4_CANCELED</dt> <dd> The client specified OPEN4_SHARE_ACCESS_WANT_CANCEL and now any "want" for this file object is cancelled.</t> <t hangText="WND4_IS_DIR"></dd> <dt>WND4_IS_DIR</dt> <dd> The specified file object is a directory, and the operation is OPEN or WANT_DELEGATION, which do not support delegations on directories.</t> </list> </t></dd> </dl> <t> OPEN4_SHARE_ACCESS_WANT_READ_DELEG, OPEN_SHARE_ACCESS_WANT_WRITE_DELEG, or OPEN_SHARE_ACCESS_WANT_ANY_DELEG mean, respectively, the client wants an OPEN_DELEGATE_READ, OPEN_DELEGATE_WRITE, or any delegation regardless which of OPEN4_SHARE_ACCESS_READ, OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH is set. If the client has an OPEN_DELEGATE_READ delegation on a file and requests an OPEN_DELEGATE_WRITE delegation, then the client is requesting atomic upgrade of its OPEN_DELEGATE_READ delegation to an OPEN_DELEGATE_WRITE delegation. If the client has an OPEN_DELEGATE_WRITE delegation on a file and requests an OPEN_DELEGATE_READ delegation, then the client is requesting atomic downgrade to an OPEN_DELEGATE_READ delegation. A serverMAY<bcp14>MAY</bcp14> support atomic upgrade or downgrade. If it does, then the returned delegation_type of OPEN_DELEGATE_READ or OPEN_DELEGATE_WRITE that is different from the delegation type the client currently has, indicates successful upgrade or downgrade. If the server does not support atomic delegation upgrade or downgrade, then ond_why will be set to WND4_NOT_SUPP_UPGRADE or WND4_NOT_SUPP_DOWNGRADE. </t> <t> OPEN4_SHARE_ACCESS_WANT_NO_DELEG means that the client wants no delegation. </t> <t> OPEN4_SHARE_ACCESS_WANT_CANCEL means that the client wants no delegation and wants to cancel any previously registered "want" for a delegation. </t> <t> The client may set one or both of OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL and OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED. However, they will have no effect unless one of following is set:<list style="symbols"> <t>OPEN4_SHARE_ACCESS_WANT_READ_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG</t> <t>OPEN4_SHARE_ACCESS_WANT_ANY_DELEG</t> </list></t> <ul spacing="normal"> <li>OPEN4_SHARE_ACCESS_WANT_READ_DELEG</li> <li>OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG</li> <li>OPEN4_SHARE_ACCESS_WANT_ANY_DELEG</li> </ul> <t> If the client specifies OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL, then it wishes to register a "want" for a delegation, in the event the OPEN results do not include a delegation. If so and the server denies the delegation due to insufficient resources, the serverMAY<bcp14>MAY</bcp14> later inform the client, via the CB_RECALLABLE_OBJ_AVAIL operation, that the resource limitation condition has eased. The server will tell the client that it intends to send a future CB_RECALLABLE_OBJ_AVAIL operation by setting delegation_type in the results to OPEN_DELEGATE_NONE_EXT, ond_why to WND4_RESOURCE, and ond_server_will_signal_avail set to TRUE. If ond_server_will_signal_avail is set to TRUE, the serverMUST<bcp14>MUST</bcp14> later send a CB_RECALLABLE_OBJ_AVAIL operation. </t> <t> If the client specifies OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_UNCONTENDED, then it wishes to register a "want" for a delegation, in the event the OPEN results do not include a delegation. If so and the server denies the delegation due to contention, the serverMAY<bcp14>MAY</bcp14> later inform the client, via the CB_PUSH_DELEG operation, that the contention condition has eased. The server will tell the client that it intends to send a future CB_PUSH_DELEG operation by setting delegation_type in the results to OPEN_DELEGATE_NONE_EXT, ond_why to WND4_CONTENTION, and ond_server_will_push_deleg to TRUE. If ond_server_will_push_deleg is TRUE, the serverMUST<bcp14>MUST</bcp14> later send a CB_PUSH_DELEG operation. </t> <t> If the client has previously registered a want for a delegation on a file, and then sends a request to register a want for a delegation on the same file, the serverMUST<bcp14>MUST</bcp14> return a new error: NFS4ERR_DELEG_ALREADY_WANTED. If the client wishes to register a different type of delegation want for the same file, itMUST<bcp14>MUST</bcp14> cancel the existing delegation WANT. </t> </section> <section toc="exclude" anchor="OP_OPEN_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> In absence of a persistent session, the client invokes exclusive create by setting the how parameter to EXCLUSIVE4 or EXCLUSIVE4_1. In these cases, the client provides a verifier that can reasonably be expected to be unique. A combination of a client identifier, perhaps the client network address, and a unique number generated by the client, perhaps the RPC transaction identifier, may be appropriate. </t> <t> If the object does not exist, the server creates the object and stores the verifier in stable storage. For file systems that do not provide a mechanism for the storage of arbitrary file attributes, the server may use one or more elements of the object's metadata to store the verifier. The verifierMUST<bcp14>MUST</bcp14> be stored in stable storage to prevent erroneous failure on retransmission of the request. It is assumed that an exclusive create is being performed because exclusive semantics are critical to the application. Because of the expected usage, exclusive CREATE does not rely solely on the server's reply cache for storage of the verifier. A nonpersistent reply cache does not survive a crash and the session and reply cache may be deleted after a network partition that exceeds the lease time, thus opening failure windows. </t> <t> An NFSv4.1 serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> store the verifier in any of the file'sRECOMMENDED<bcp14>RECOMMENDED</bcp14> orREQUIRED<bcp14>REQUIRED</bcp14> attributes. If it does, the serverSHOULD<bcp14>SHOULD</bcp14> use time_modify_set or time_access_set to store the verifier. The serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> store the verifier in the following attributes:<list style="empty"> <t>acl</t> <ul empty="true" spacing="normal"> <li>acl (it is desirable for access control to be established atcreation),</t> <t>dacl (ditto),</t> <t>mode (ditto),</t> <t>owner (ditto),</t> <t>owner_group (ditto),</t> <t>retentevt_setcreation),</li> <li>dacl (ditto),</li> <li>mode (ditto),</li> <li>owner (ditto),</li> <li>owner_group (ditto),</li> <li>retentevt_set (it may be desired to establish retention atcreation)</t> <t>retention_hold (ditto),</t> <t>retention_set (ditto),</t> <t>saclcreation)</li> <li>retention_hold (ditto),</li> <li>retention_set (ditto),</li> <li>sacl (it is desirable for auditing control to be established atcreation),</t> <t>sizecreation),</li> <li>size (on some servers, size may have a limited range ofvalues),</t>values),</li> <li> <t>mode_set_masked (as with mode),<list style="empty"> <t>and</t> </list></t><t>time_creation<ul empty="true" spacing="normal"> <li>and</li> </ul> </li> <li>time_creation (a meaningful file creation should be set when the file iscreated).</t> </list>created).</li> </ul> <t> Another alternative for the server is to use a named attribute to store the verifier. </t> <t> Because the EXCLUSIVE4 create method does not specify initial attributes when processing an EXCLUSIVE4 create, the server<list style="symbols"> <t> SHOULD</t> <ul spacing="normal"> <li> <bcp14>SHOULD</bcp14> set the owner of the file to that corresponding to the credential of request's RPC header.</t> <t> SHOULD NOT</li> <li> <bcp14>SHOULD NOT</bcp14> leave the file's access control to anyone but the owner of the file.</t> </list> </t></li> </ul> <t> If the server cannot support exclusive create semantics, possibly because of the requirement to commit the verifier to stable storage, it should fail the OPEN request with the error NFS4ERR_NOTSUPP. </t> <t> During an exclusive CREATE request, if the object already exists, the server reconstructs the object's verifier and compares it with the verifier in the request. If they match, the server treats the request as a success. The request is presumed to be a duplicate of an earlier, successful request for which the reply was lost and that the server duplicate request cache mechanism did not detect. If the verifiers do not match, the request is rejected with the status NFS4ERR_EXIST. </t> <t> After the client has performed a successful exclusive create, the attrset response indicates which attributes were used to store the verifier. If EXCLUSIVE4 was used, the attributes set in attrset were used for the verifier. If EXCLUSIVE4_1 was used, the client determines the attributes used for the verifier by comparing attrset with cva_attrs.attrmask; any bits set in the former but not the latter identify the attributes used to store the verifier. The clientMUST<bcp14>MUST</bcp14> immediately send a SETATTR to set attributes used to store the verifier. Until it does so, the attributes used to store the verifier cannot be relied upon. The subsequent SETATTRMUST NOT<bcp14>MUST NOT</bcp14> occur in the same COMPOUND request as the OPEN. </t> <t> Unless a persistent session is used, use of the GUARDED4 attribute does not provide exactly once semantics. In particular, if a reply is lost and the server does not detect the retransmission of the request, the operation can fail with NFS4ERR_EXIST, even though the create was performed successfully. The client would use this behavior in the case that the application has not requested an exclusive create but has asked to have the file truncated when the file is opened. In the case of the client timing out and retransmitting the create request, the client can use GUARDED4 to prevent against a sequence like create, write, create (retransmitted) from occurring. </t> <t> For SHARE reservations, the value of the expression (share_access & ~OPEN4_SHARE_ACCESS_WANT_DELEG_MASK)MUST<bcp14>MUST</bcp14> be one of OPEN4_SHARE_ACCESS_READ, OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH. If not, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. The value of share_denyMUST<bcp14>MUST</bcp14> be one of OPEN4_SHARE_DENY_NONE, OPEN4_SHARE_DENY_READ, OPEN4_SHARE_DENY_WRITE, or OPEN4_SHARE_DENY_BOTH. If not, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t> <t> Based on the share_access value (OPEN4_SHARE_ACCESS_READ, OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH), the client should check that the requester has the proper access rights to perform the specified operation. This would generally be the results of applying the ACL access rules to the file for the current requester. However, just as with the ACCESS operation, the client should not attempt to second-guess the server's decisions, as access rights may change and may be subject to server administrative controls outside the ACL framework. If the requester's READ or WRITE operation is not authorized (depending on the share_access value), the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_ACCESS. </t> <t> Note that if the client ID was not created with the EXCHGID4_FLAG_BIND_PRINC_STATEID capability set in the reply to EXCHANGE_ID, then the serverMUST NOT<bcp14>MUST NOT</bcp14> impose any requirement that READs and WRITEs sent for an open file have the same credentials as the OPEN itself, and the server isREQUIRED<bcp14>REQUIRED</bcp14> to perform access checking on the READs and WRITEs themselves. Otherwise, if the reply to EXCHANGE_ID did have EXCHGID4_FLAG_BIND_PRINC_STATEID set, then with one exception, the credentials used in the OPEN requestMUST<bcp14>MUST</bcp14> match those used in the READs and WRITEs, and the stateids in the READs and WRITEsMUST<bcp14>MUST</bcp14> match, or be derived from the stateid from the reply to OPEN. The exception is if SP4_SSV or SP4_MACH_CRED state protection is used, and the spo_must_allow result of EXCHANGE_ID includes the READ and/or WRITE operations. In that case, the machine or SSV credential will be allowed to send READ and/or WRITE. See <xreftarget="OP_EXCHANGE_ID"/>.target="OP_EXCHANGE_ID" format="default"/>. </t> <t> If the component provided to OPEN is a symbolic link, the error NFS4ERR_SYMLINK will be returned to the client, while if it is a directory the error NFS4ERR_ISDIR will be returned. If the component is neither of those but not an ordinary file, the error NFS4ERR_WRONG_TYPE is returned. If the current filehandle is not a directory, the error NFS4ERR_NOTDIR will be returned. </t> <t> The use of the OPEN4_RESULT_PRESERVE_UNLINKED result flag allows a client to avoid the common implementation practice of renaming an open file to ".nfs<uniquevalue>"value>" after it removes the file. After the server returns OPEN4_RESULT_PRESERVE_UNLINKED, if a client sends a REMOVE operation that would reduce the file's link count to zero, the serverSHOULD<bcp14>SHOULD</bcp14> report a value of zero for the numlinks attribute on the file. </t> <t> If another client has a delegation of the file being opened that conflicts with open being done (sometimes depending on the share_access or share_deny value specified), the delegation(s)MUST<bcp14>MUST</bcp14> be recalled, and the operation cannot proceed until each such delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. In the case of an OPEN_DELEGATE_WRITE delegation, any open by a different client will conflict, while for an OPEN_DELEGATE_READ delegation, only opens with one of the following characteristics will be considered conflicting:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The value of share_access includes the bit OPEN4_SHARE_ACCESS_WRITE.</t> <t></li> <li> The value of share_deny specifies OPEN4_SHARE_DENY_READ or OPEN4_SHARE_DENY_BOTH.</t> <t></li> <li> OPEN4_CREATE is specified together with UNCHECKED4, the size attribute is specified as zero (for truncation), and an existing file is truncated.</t> </list> </t></li> </ul> <t> If OPEN4_CREATE is specified and the file does not exist and the current filehandle designates a directory for which another client holds a directory delegation, then, unless the delegation is such that the situation can be resolved by sending a notification, the delegationMUST<bcp14>MUST</bcp14> be recalled, and the operation cannot proceed until the delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. </t> <t> If OPEN4_CREATE is specified and the file does not exist and the current filehandle designates a directory for which one or more directory delegations exist, then, when those delegations request such notifications, NOTIFY4_ADD_ENTRY will be generated as a result of this operation. </t> <section toc="exclude" anchor="open_getfh_issue"title="Warningnumbered="true"> <name>Warning to ClientImplementors">Implementors</name> <t> OPEN resembles LOOKUP in that it generates a filehandle for the client to use. Unlike LOOKUP though, OPEN creates server state on the filehandle. In normal circumstances, the client can only release this state with a CLOSE operation. CLOSE uses the current filehandle to determine which file to close. Therefore, the clientMUST<bcp14>MUST</bcp14> follow every OPEN operation with a GETFH operation in the same COMPOUND procedure. This will supply the client with the filehandle such that CLOSE can be used appropriately. </t> <t> Simply waiting for the lease on the file to expire is insufficient because the server may maintain the state indefinitely as long as another client does not attempt to make a conflicting access to the same file. </t> <t> See also <xreftarget="COMPOUND_Sizing_Issues"/>.target="COMPOUND_Sizing_Issues" format="default"/>. </t> </section> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_OPENATTR"title="Operationnumbered="true" toc="default"> <name>Operation 19: OPENATTR - Open Named AttributeDirectory" >Directory</name> <section toc="exclude" anchor="OP_OPENATTR_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct OPENATTR4args { /* CURRENT_FH: object */ bool createdir;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_OPENATTR_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct OPENATTR4res { /* * If status is NFS4_OK, * new CURRENT_FH: named attribute * directory */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_OPENATTR_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The OPENATTR operation is used to obtain the filehandle of the named attribute directory associated with the current filehandle. The result of the OPENATTR will be a filehandle to an object of type NF4ATTRDIR. From this filehandle, READDIR and LOOKUP operations can be used to obtain filehandles for the various named attributes associated with the original file system object. Filehandles returned within the named attribute directory will designate objects of type of NF4NAMEDATTR. </t> <t> The createdir argument allows the client to signify if a named attribute directory should be created as a result of the OPENATTR operation. Some clients may use the OPENATTR operation with a value of FALSE for createdir to determine if any named attributes exist for the object. If none exist, then NFS4ERR_NOENT will be returned. If createdir has a value of TRUE and no named attribute directory exists, one is created and its filehandle becomes the current filehandle. On the other hand, if createdir has a value of TRUE and the named attribute directory already exists, no error results and the filehandle of the existing directory becomes the current filehandle. The creation of a named attribute directory assumes that the server has implemented named attribute support in this fashion and is not required to do so by this definition. </t> <t> If the currentfile handlefilehandle designates an object of type NF4NAMEDATTR (a named attribute) or NF4ATTRDIR (a named attribute directory), an error of NFS4ERR_WRONG_TYPE is returned to the client. Named attributes or a named attribute directoryMUST NOT<bcp14>MUST NOT</bcp14> have their own named attributes. </t> </section> <section toc="exclude" anchor="OP_OPENATTR_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the server does not support named attributes for the current filehandle, an error of NFS4ERR_NOTSUPP will be returned to the client. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_OPEN_DOWNGRADE"title="Operationnumbered="true" toc="default"> <name>Operation 21: OPEN_DOWNGRADE - Reduce Open FileAccess" >Access</name> <section toc="exclude" anchor="OP_OPEN_DOWNGRADE_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct OPEN_DOWNGRADE4args { /* CURRENT_FH: opened file */ stateid4 open_stateid; seqid4 seqid; uint32_t share_access; uint32_t share_deny;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_OPEN_DOWNGRADE_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct OPEN_DOWNGRADE4resok { stateid4 open_stateid; }; union OPEN_DOWNGRADE4res switch(nfsstat4 status) { case NFS4_OK: OPEN_DOWNGRADE4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_OPEN_DOWNGRADE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is used to adjust the access and deny states for a given open. This is necessary when a given open-owner opens the same file multiple times with different access and deny values. In this situation, a close of one of the opens may change the appropriate share_access and share_deny flags to remove bits associated with opens no longer in effect. </t> <t> Valid values for the expression (share_access & ~OPEN4_SHARE_ACCESS_WANT_DELEG_MASK) are OPEN4_SHARE_ACCESS_READ, OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH. If the client specifies other values, the serverMUST<bcp14>MUST</bcp14> reply with NFS4ERR_INVAL. </t> <t> Valid values for the share_deny field are OPEN4_SHARE_DENY_NONE, OPEN4_SHARE_DENY_READ, OPEN4_SHARE_DENY_WRITE, or OPEN4_SHARE_DENY_BOTH. If the client specifies other values, the serverMUST<bcp14>MUST</bcp14> reply with NFS4ERR_INVAL. </t> <t> After checking for valid values of share_access and share_deny, the server replaces the current access and deny modes on the file with share_access and share_deny subject to the following constraints:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The bits in share_accessSHOULD<bcp14>SHOULD</bcp14> equal the union of the share_access bits (not including OPEN4_SHARE_WANT_* bits) specified for some subset of the OPENs in effect for the current open-owner on the current file.</t> <t></li> <li> The bits in share_denySHOULD<bcp14>SHOULD</bcp14> equal the union of the share_deny bits specified for some subset of the OPENs in effect for the current open-owner on the current file.</t> </list></li> </ul> <t> If the above constraints are not respected, the serverSHOULD<bcp14>SHOULD</bcp14> return the error NFS4ERR_INVAL. Since share_access and share_deny bits should be subsets of those already granted, short of a defect in the client or server implementation, it is not possible for the OPEN_DOWNGRADE request to be denied because of conflicting share reservations. </t> <t> The seqid argument is not used in NFSv4.1,MAY<bcp14>MAY</bcp14> be any value, andMUST<bcp14>MUST</bcp14> be ignored by the server. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_OPEN_DOWNGRADE_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> An OPEN_DOWNGRADE operation may make OPEN_DELEGATE_READ delegations grantable where they were not previously. Servers may choose to respond immediately if there are pending delegation want requests or may respond to the situation at a later time. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_PUTFH"title="Operationnumbered="true" toc="default"> <name>Operation 22: PUTFH - Set CurrentFilehandle" >Filehandle</name> <section toc="exclude" anchor="OP_PUTFH_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct PUTFH4args { nfs_fh4 object;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_PUTFH_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct PUTFH4res { /* * If status is NFS4_OK, * new CURRENT_FH: argument to PUTFH */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_PUTFH_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation replaces the current filehandle with the filehandle provided as an argument. It clears the current stateid. </t> <t> If the security mechanism used by the requester does not meet the requirements of the filehandle provided to this operation, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_WRONGSEC. </t> <t> See <xreftarget="current_filehandle"/>target="current_filehandle" format="default"/> for more details on the current filehandle. </t> <t> See <xreftarget="current_stateid"/>target="current_stateid" format="default"/> for more details on the current stateid. </t> </section> <section toc="exclude" anchor="OP_PUTFH_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> This operation is used in an NFS request to set the context for file accessing operations that follow in the same COMPOUND request. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_PUTPUBFH"title="Operationnumbered="true" toc="default"> <name>Operation 23: PUTPUBFH - Set PublicFilehandle" >Filehandle</name> <section toc="exclude" anchor="OP_PUTPUBFH_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ void;</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_PUTPUBFH_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct PUTPUBFH4res { /* * If status is NFS4_OK, * new CURRENT_FH: public fh */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_PUTPUBFH_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation replaces the current filehandle with the filehandle that represents the public filehandle of the server's namespace. This filehandle may be different from the "root" filehandle that may be associated with some other directory on the server. </t> <t> PUTPUBFH also clears the current stateid. </t> <t> The public filehandle represents the concepts embodied in <xreftarget="RFC2054">RFCtarget="RFC2054" format="default">RFC 2054</xref>, <xreftarget="RFC2055">RFCtarget="RFC2055" format="default">RFC 2055</xref>, and <xreftarget="RFC2224">RFCtarget="RFC2224" format="default">RFC 2224</xref>. The intent for NFSv4.1 is that the public filehandle (represented by the PUTPUBFH operation) be used as a method of providing WebNFS server compatibility with NFSv3. </t> <t> The public filehandle and the root filehandle (represented by the PUTROOTFH operation)SHOULD<bcp14>SHOULD</bcp14> be equivalent. If the public and root filehandles are not equivalent, then the directory corresponding to the public filehandleMUST<bcp14>MUST</bcp14> be a descendant of the directory corresponding to the root filehandle. </t> <t> See <xreftarget="current_filehandle"/>target="current_filehandle" format="default"/> for more details on the current filehandle. </t> <t> See <xreftarget="current_stateid"/>target="current_stateid" format="default"/> for more details on the current stateid. </t> </section> <section toc="exclude" anchor="OP_PUTPUBFH_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> This operation is used in an NFS request to set the context for file accessing operations that follow in the same COMPOUND request. </t> <t> With the NFSv3 public filehandle, the client is able to specify whether the pathname provided in the LOOKUP should be evaluated as either an absolute path relative to the server's root or relative to the public filehandle. <xreftarget="RFC2224">RFCtarget="RFC2224" format="default">RFC 2224</xref> contains further discussion of the functionality. With NFSv4.1, that type of specification is not directly available in the LOOKUP operation. The reason for this is because the component separators needed to specify absolute vs. relative are not allowed in NFSv4. Therefore, the client is responsible for constructing its request such that the use of either PUTROOTFH or PUTPUBFH signifies absolute or relative evaluation of an NFS URL, respectively. </t> <t> Note that there are warnings mentioned in <xreftarget="RFC2224">RFCtarget="RFC2224" format="default">RFC 2224</xref> with respect to the use of absolute evaluation and the restrictions the server may place on that evaluation with respect to how much of its namespace has been made available. These same warnings apply to NFSv4.1. It is likely, therefore, that because of server implementation details, an NFSv3 absolute public filehandle look up may behave differently than an NFSv4.1 absolute resolution. </t> <t> There is a form of security negotiation as described in <xreftarget="RFC2755">RFCtarget="RFC2755" format="default">RFC 2755</xref> that uses the public filehandle and an overloading of the pathname. This method is not available with NFSv4.1 as filehandles are not overloaded with special meaning and therefore do not provide the same framework as NFSv3. Clients should therefore use the security negotiation mechanisms described in <xref target="Security_Service_Negotiation"/>.format="default"/>. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_PUTROOTFH"title="Operationnumbered="true" toc="default"> <name>Operation 24: PUTROOTFH - Set RootFilehandle" >Filehandle</name> <section toc="exclude" anchor="OP_PUTROOTFH_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork> void; </artwork> </figure>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ void;]]></sourcecode> </section> <section toc="exclude" anchor="OP_PUTROOTFH_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct PUTROOTFH4res { /* * If status is NFS4_OK, * new CURRENT_FH: root fh */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_PUTROOTFH_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation replaces the current filehandle with the filehandle that represents the root of the server's namespace. From this filehandle, a LOOKUP operation can locate any other filehandle on the server. This filehandle may be different from the "public" filehandle that may be associated with some other directory on the server. </t> <t> PUTROOTFH also clears the current stateid. </t> <t> See <xreftarget="current_filehandle"/>target="current_filehandle" format="default"/> for more details on the current filehandle. </t> <t> See <xreftarget="current_stateid"/>target="current_stateid" format="default"/> for more details on the current stateid. </t> </section> <section toc="exclude" anchor="OP_PUTROOTFH_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> This operation is used in an NFS request to set the context for file accessing operations that follow in the same COMPOUND request. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_READ"title="Operationnumbered="true" toc="default"> <name>Operation 25: READ - Read fromFile" >File</name> <section toc="exclude" anchor="OP_READ_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct READ4args { /* CURRENT_FH: file */ stateid4 stateid; offset4 offset; count4 count;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_READ_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct READ4resok { bool eof; opaquedata<>;data<>; }; union READ4res switch (nfsstat4 status) { case NFS4_OK: READ4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_READ_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The READ operation reads data from the regular file identified by the current filehandle. </t> <t> The client provides an offset of where the READ is to start and a count of how many bytes are to be read. An offset of zero means to read data starting at the beginning of the file. If offset is greater than or equal to the size of the file, the status NFS4_OK is returned with a data length set to zero and eof is set to TRUE. The READ is subject to access permissions checking. </t> <t> If the client specifies a count value of zero, the READ succeeds and returns zero bytes of data again subject to access permissions checking. The server may choose to return fewer bytes than specified by the client. The client needs to check for this condition and handle the condition appropriately. </t> <t> Except when special stateids are used, the stateid value for a READ request represents a value returned from a previous byte-range lock or share reservation request or the stateid associated with a delegation. The stateid identifies the associated owners if any and is used by the server to verify that the associated locks are still valid (e.g., have not been revoked). </t> <t> If the read ended at the end-of-file (formally, in a correctly formed READ operation, if offset + count is equal to the size of the file), or the READ operation extends beyond the size of the file (if offset + count is greater than the size of the file), eof is returned as TRUE; otherwise, it is FALSE. A successful READ of an empty file will always return eof as TRUE. </t> <t> If the current filehandle is not an ordinary file, an error will be returned to the client. In the case that the current filehandle represents an object of type NF4DIR, NFS4ERR_ISDIR is returned. If the current filehandle designates a symbolic link, NFS4ERR_SYMLINK is returned. In all other cases, NFS4ERR_WRONG_TYPE is returned. </t> <t> For a READ with a stateid value of all bits equal to zero, the serverMAY<bcp14>MAY</bcp14> allow the READ to be serviced subject to mandatory byte-range locks or the current share deny modes for the file. For a READ with a stateid value of all bits equal to one, the serverMAY<bcp14>MAY</bcp14> allow READ operations to bypass locking checks at the server. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_READ_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the server returns a "short read" (i.e., fewer data than requested and eof is set to FALSE), the client should send another READ to get the remaining data. A server may return less data than requested under several circumstances. The file may have been truncated by another client or perhaps on the server itself, changing the file size from what the requesting client believes to be the case. This would reduce the actual amount of data available to the client. It is possible that the server reduce the transfer size and so return a short read result. Server resource exhaustion may also occur in a short read. </t> <t> If mandatory byte-range locking is in effect for the file, and if the byte-range corresponding to the data to be read from the file is WRITE_LT locked by an owner not associated with the stateid, the server will return the NFS4ERR_LOCKED error. The client should try to get the appropriate READ_LT via the LOCK operation before re-attempting the READ. When the READ completes, the client should release the byte-range lock via LOCKU. </t> <t> If another client has an OPEN_DELEGATE_WRITE delegation for the file being read, the delegation must be recalled, and the operation cannot proceed until that delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while the delegation remains outstanding. Normally, delegations will not be recalled as a result of a READ operation since the recall will occur as a result of an earlier OPEN. However, since it is possible for a READ to be done with a special stateid, the server needs to check for this case even though the client should have done an OPEN previously. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_READDIR"title="Operationnumbered="true" toc="default"> <name>Operation 26: READDIR - ReadDirectory" >Directory</name> <section toc="exclude" anchor="OP_READDIR_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct READDIR4args { /* CURRENT_FH: directory */ nfs_cookie4 cookie; verifier4 cookieverf; count4 dircount; count4 maxcount; bitmap4 attr_request;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_READDIR_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct entry4 { nfs_cookie4 cookie; component4 name; fattr4 attrs; entry4 *nextentry; }; struct dirlist4 { entry4 *entries; bool eof; }; struct READDIR4resok { verifier4 cookieverf; dirlist4 reply; }; union READDIR4res switch (nfsstat4 status) { case NFS4_OK: READDIR4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_READDIR_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The READDIR operation retrieves a variable number of entries from a file system directory and returns client-requested attributes for each entry along with information to allow the client to request additional directory entries in a subsequent READDIR. </t> <t> The arguments contain a cookie value that represents where the READDIR should start within the directory. A value of zero for the cookie is used to start reading at the beginning of the directory. For subsequent READDIR requests, the client specifies a cookie value that is provided by the server on a previous READDIR request. </t> <t> The request's cookieverf field should be set to 0 zero) when the request's cookie field is zero (first read of the directory). On subsequent requests, the cookieverf field must match the cookieverf returned by the READDIR in which the cookie was acquired. If the server determines that the cookieverf is no longer valid for the directory, the error NFS4ERR_NOT_SAME must be returned. </t> <t> The dircount field of the request is a hint of the maximum number of bytes of directory information that should be returned. This value represents the total length of the names of the directory entries and the cookie value for these entries. This length represents the XDR encoding of the data (names and cookies) and not the length in the native format of the server. </t> <t> The maxcount field of the request represents the maximum total size of all of the data being returned within the READDIR4resok structure and includes the XDR overhead. The serverMAY<bcp14>MAY</bcp14> return less data. If the server is unable to return a single directory entry within the maxcount limit, the error NFS4ERR_TOOSMALLMUST<bcp14>MUST</bcp14> be returned to the client. </t> <t> Finally, the request's attr_request field represents the list of attributes to be returned for each directory entry supplied by the server. </t> <t> A successful reply consists of a list of directory entries. Each of these entries contains the name of the directory entry, a cookie value for that entry, and the associated attributes as requested. The "eof" flag has a value of TRUE if there are no more entries in the directory. </t> <t> The cookie value is only meaningful to the server and is used as a cursor for the directory entry. As mentioned, this cookie is used by the client for subsequent READDIR operations so that it may continue reading a directory. The cookie is similar in concept to a READ offset butMUST NOT<bcp14>MUST NOT</bcp14> be interpreted as such by the client. Ideally, the cookie valueSHOULD NOT<bcp14>SHOULD NOT</bcp14> change if the directory is modified since the client may be caching these values. </t> <t> In some cases, the server may encounter an error while obtaining the attributes for a directory entry. Instead of returning an error for the entire READDIR operation, the server can instead return the attribute rdattr_error (<xreftarget="attrdef_rdattr_error"/>).target="attrdef_rdattr_error" format="default"/>). With this, the server is able to communicate the failure to the client and not fail the entire operation in the instance of what might be a transient failure. Obviously, the client must request the fattr4_rdattr_error attribute for this method to work properly. If the client does not request the attribute, the server has no choice but to return failure for the entire READDIR operation. </t> <t> For some file system environments, the directory entries "." and ".." have special meaning, and in other environments, they do not. If the server supports these special entries within a directory, theySHOULD NOT<bcp14>SHOULD NOT</bcp14> be returned to the client as part of the READDIR response. To enable some client environments, the cookie values of zero, 1, and 2 are to be considered reserved. Note that the UNIX client will use these values when combining the server's response and local representations to enable a fully formed UNIX directory presentation to the application. </t> <t> For READDIR arguments, cookie values of one and twoSHOULD NOT<bcp14>SHOULD NOT</bcp14> be used, and for READDIR results, cookie values of zero, one, and twoSHOULD NOT<bcp14>SHOULD NOT</bcp14> be returned. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_READDIR_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The server's file system directory representations can differ greatly. A client's programming interfaces may also be bound to the local operating environment in a way that does not translate well into the NFS protocol. Therefore, the use of the dircount and maxcount fields are provided to enable the client to provide hints to the server. If the client is aggressive about attribute collection during a READDIR, the server has an idea of how to limit the encoded response. </t> <t> If dircount is zero, the server bounds the reply's size based on the request's maxcount field. </t> <t> The cookieverf may be used by the server to help manage cookie values that may become stale. It should be a rare occurrence that a server is unable to continue properly reading a directory with the provided cookie/cookieverf pair. The serverSHOULD<bcp14>SHOULD</bcp14> make every effort to avoid this condition since the application at the client might be unable to properly handle this type of failure. </t> <t> The use of the cookieverf will also protect the client from using READDIR cookie values that might be stale. For example, if the file system has been migrated, the server might or might not be able to use the same cookie values to service READDIR as the previous server used. With the client providing the cookieverf, the server is able to provide the appropriate response to the client. This prevents the case where the server accepts a cookie value but the underlying directory has changed and the response is invalid from the client's context of its previous READDIR. </t> <t> Since some servers will not be returning "." and ".." entries as has been done with previous versions of the NFS protocol, the client that requires these entries be present in READDIR responses must fabricate them. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_READLINK"title="Operationnumbered="true" toc="default"> <name>Operation 27: READLINK - Read SymbolicLink" >Link</name> <section toc="exclude" anchor="OP_READLINK_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* CURRENT_FH: symlink */void; </artwork> </figure>void;]]></sourcecode> </section> <section toc="exclude" anchor="OP_READLINK_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct READLINK4resok { linktext4 link; }; union READLINK4res switch (nfsstat4 status) { case NFS4_OK: READLINK4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_READLINK_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> READLINK reads the data associated with a symbolic link. Depending on the value of the UTF-8 capability attribute (<xreftarget="utf8_caps"/>),target="utf8_caps" format="default"/>), the data is encoded in UTF-8. Whether created by an NFS client or created locally on the server, the data in a symbolic link is not interpreted (except possibly to check for proper UTF-8 encoding) when created, but is simply stored. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_READLINK_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> A symbolic link is nominally a pointer to another file. The data is not necessarily interpreted by the server, just stored in the file. It is possible for a client implementation to store a pathname that is not meaningful to the server operating system in a symbolic link. A READLINK operation returns the data to the client for interpretation. If different implementations want to share access to symbolic links, then they must agree on the interpretation of the data in the symbolic link. </t> <t> The READLINK operation is only allowed on objects of type NF4LNK. The server should return the error NFS4ERR_WRONG_TYPE if the object is not of type NF4LNK. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_REMOVE"title="Operationnumbered="true" toc="default"> <name>Operation 28: REMOVE - Remove File SystemObject" >Object</name> <section toc="exclude" anchor="OP_REMOVE_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct REMOVE4args { /* CURRENT_FH: directory */ component4 target;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_REMOVE_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct REMOVE4resok { change_info4 cinfo; }; union REMOVE4res switch (nfsstat4 status) { case NFS4_OK: REMOVE4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_REMOVE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The REMOVE operation removes (deletes) a directory entry named by filename from the directory corresponding to the current filehandle. If the entry in the directory was the last reference to the corresponding file system object, the object may be destroyed. The directory may be either of type NF4DIR or NF4ATTRDIR. </t> <t> For the directory where the filename was removed, the server returns change_info4 information in cinfo. With the atomic field of the change_info4 data type, the server will indicate if the before and after change attributes were obtained atomically with respect to the removal. </t> <t> If the target has a length of zero, or if the target does not obey the UTF-8 definition (and the server is enforcing UTF-8 encoding; see <xreftarget="utf8_caps"/>),target="utf8_caps" format="default"/>), the error NFS4ERR_INVAL will be returned. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_REMOVE_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> NFSv3 required a different operator RMDIR for directory removal and REMOVE for non-directory removal. This allowed clients to skip checking the file type when being passed a non-directory delete system call (e.g., <xreftarget="unlink">unlink()</xref>target="unlink" format="default">unlink()</xref> in POSIX) to remove a directory, as well as the converse (e.g., a rmdir() on a non-directory) because they knew the server would check the file type. NFSv4.1 REMOVE can be used to delete any directory entry independent of its file type. The implementor of an NFSv4.1 client's entry points from the unlink() and rmdir() system calls should first check the file type against the types the system call is allowed to remove before sending a REMOVE operation. Alternatively, the implementor can produce a COMPOUND call that includes a LOOKUP/VERIFY sequence of operations to verify the file type before a REMOVE operation in the same COMPOUND call. </t> <t> The concept of last reference is server specific. However, if the numlinks field in the previous attributes of the object had the value 1, the client should not rely on referring to the object via a filehandle. Likewise, the client should not rely on the resources (disk space, directory entry, and so on) formerly associated with the object becoming immediately available. Thus, if a client needs to be able to continue to access a file after using REMOVE to remove it, the client should take steps to make sure that the file will still be accessible. While the traditional mechanism used is to RENAME the file from its old name to a new hidden name, the NFSv4.1 OPEN operationMAY<bcp14>MAY</bcp14> return a result flag, OPEN4_RESULT_PRESERVE_UNLINKED, which indicates to the client that the file will be preserved if the file has an outstanding open (see <xreftarget="OP_OPEN"/>).target="OP_OPEN" format="default"/>). </t> <t> If the server finds that the file is still open when the REMOVE arrives:<list style='symbols'> <t></t> <ul spacing="normal"> <li> The serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> delete the file's directory entry if the file was opened with OPEN4_SHARE_DENY_WRITE or OPEN4_SHARE_DENY_BOTH.</t> <t></li> <li> If the file was not opened with OPEN4_SHARE_DENY_WRITE or OPEN4_SHARE_DENY_BOTH, the serverSHOULD<bcp14>SHOULD</bcp14> delete the file's directory entry. However, until last CLOSE of the file, the serverMAY<bcp14>MAY</bcp14> continue to allow access to the file via its filehandle.</t> <t></li> <li> The serverMUST NOT<bcp14>MUST NOT</bcp14> delete the directory entry if the reply from OPEN had the flag OPEN4_RESULT_PRESERVE_UNLINKED set.</t> </list> </t></li> </ul> <t> The serverMAY<bcp14>MAY</bcp14> implement its own restrictions on removal of a file while it is open. The server might disallow such a REMOVE (or a removal that occurs as part of RENAME). The conditions that influence the restrictions on removal of a file while it is still open include:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Whether certain access protocols (i.e., not just NFS) are holding the file open.</t> <t></li> <li> Whether particular options, access modes, or policies on the server are enabled.</t> </list> </t></li> </ul> <t> If a file has an outstanding OPEN and this prevents the removal of the file's directory entry, the error NFS4ERR_FILE_OPEN is returned. </t> <t> Where the determination above cannot be made definitively because delegations are being held, theyMUST<bcp14>MUST</bcp14> be recalled to allow processing of the REMOVE to continue. When a delegation is held, the server has no reliable knowledge of the status of OPENs for that client, so unless there are files opened with the particular deny modes by clients without delegations, the determination cannot be made until delegations are recalled, and the operation cannot proceed until each sufficient delegation has been returned or revoked to allow the server to make a correct determination. </t> <t> In all cases in which delegations are recalled, the server is likely to return one or more NFS4ERR_DELAY errors while delegations remain outstanding. </t> <t> If the current filehandle designates a directory for which another client holds a directory delegation, then, unless the situation can be resolved by sending a notification, the directory delegationMUST<bcp14>MUST</bcp14> be recalled, and the operationMUST NOT<bcp14>MUST NOT</bcp14> proceed until the delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. </t> <t> When the current filehandle designates a directory for which one or more directory delegations exist, then, when those delegations request such notifications, NOTIFY4_REMOVE_ENTRY will be generated as a result of this operation. </t> <t> Note that when a remove occurs as a result of a RENAME, NOTIFY4_REMOVE_ENTRY will only be generated if the removal happens as a separate operation. In the case in which the removal is integrated and atomic with RENAME, the notification of the removal is integrated with notification for the RENAME. See the discussion of the NOTIFY4_RENAME_ENTRY notification in <xreftarget="OP_CB_NOTIFY"/>.target="OP_CB_NOTIFY" format="default"/>. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_RENAME"title="Operationnumbered="true" toc="default"> <name>Operation 29: RENAME - Rename DirectoryEntry" >Entry</name> <section toc="exclude" anchor="OP_RENAME_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct RENAME4args { /* SAVED_FH: source directory */ component4 oldname; /* CURRENT_FH: target directory */ component4 newname;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_RENAME_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct RENAME4resok { change_info4 source_cinfo; change_info4 target_cinfo; }; union RENAME4res switch (nfsstat4 status) { case NFS4_OK: RENAME4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_RENAME_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The RENAME operation renames the object identified by oldname in the source directory corresponding to the saved filehandle, as set by the SAVEFH operation, to newname in the target directory corresponding to the current filehandle. The operation is required to be atomic to the client. Source and target directoriesMUST<bcp14>MUST</bcp14> reside on the same file system on the server. On success, the current filehandle will continue to be the target directory. </t> <t> If the target directory already contains an entry with the name newname, the source objectMUST<bcp14>MUST</bcp14> be compatible with the target: either both are non-directories or both are directories and the targetMUST<bcp14>MUST</bcp14> be empty. If compatible, the existing target is removed before the rename occurs or, preferably, the target is removed atomically as part of the rename. See <xref target="OP_REMOVE_IMPLEMENTATION"/>format="default"/> for client and server actions whenever a target is removed. Note however that when the removal is performed atomically with the rename, certain parts of the removal described there are integrated with the rename. For example, notification of the removal will not be via a NOTIFY4_REMOVE_ENTRY but will be indicated as part of the NOTIFY4_ADD_ENTRY or NOTIFY4_RENAME_ENTRY generated by the rename. </t> <t> If the source object and the target are not compatible or if the target is a directory but not empty, the server will return the error NFS4ERR_EXIST. </t> <t> If oldname and newname both refer to the same file (e.g., they might be hard links of each other), then unless the file is open (see <xreftarget="OP_RENAME_IMPLEMENTATION"/>),target="OP_RENAME_IMPLEMENTATION" format="default"/>), RENAMEMUST<bcp14>MUST</bcp14> perform no action and return NFS4_OK. </t> <t> For both directories involved in the RENAME, the server returns change_info4 information. With the atomic field of the change_info4 data type, the server will indicate if the before and after change attributes were obtained atomically with respect to the rename. </t> <t> If oldname refers to a named attribute and the saved and current filehandles refer to different file system objects, the server will return NFS4ERR_XDEV just as if the saved and current filehandles represented directories on different file systems. </t> <t> If oldname or newname has a length of zero, or if oldname or newname does not obey the UTF-8 definition, the error NFS4ERR_INVAL will be returned. </t> </section> <section toc="exclude" anchor="OP_RENAME_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The serverMAY<bcp14>MAY</bcp14> impose restrictions on the RENAME operation such that RENAME may not be done when the file being renamed is open or when that open is done by particular protocols, or with particular options or access modes. Similar restrictions may be applied when a file exists with the target name and is open. When RENAME is rejected because of such restrictions, the error NFS4ERR_FILE_OPEN is returned. </t> <t> When oldname and rename refer to the same file and that file is open in a fashion such that RENAME would normally be rejected with NFS4ERR_FILE_OPEN if oldname and newname were different files, then RENAMESHOULD<bcp14>SHOULD</bcp14> be rejected with NFS4ERR_FILE_OPEN. </t> <t> If a server does implement such restrictions and those restrictions include cases of NFSv4 opens preventing successful execution of a rename, the server needs to recall any delegations that could hide the existence of opens relevant to that decision. This is because when a client holds a delegation, the server might not have an accurate account of the opens for that client, since the client may execute OPENs and CLOSEs locally. The RENAME operation need only be delayed until a definitive result can be obtained. For example, if there are multiple delegations and one of them establishes an open whose presence would prevent the rename, given the server's semantics, NFS4ERR_FILE_OPEN may be returned to the caller as soon as that delegation is returned without waiting for other delegations to be returned. Similarly, if such opens are not associated with delegations, NFS4ERR_FILE_OPEN can be returned immediately with no delegation recall being done. </t> <t> If the current filehandle or the saved filehandle designates a directory for which another client holds a directory delegation, then, unless the situation can be resolved by sending a notification, the delegationMUST<bcp14>MUST</bcp14> be recalled, and the operation cannot proceed until the delegation is returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while delegation remains outstanding. </t> <t> When the current and saved filehandles are the same and they designate a directory for which one or more directory delegations exist, then, when those delegations request such notifications, a notification of type NOTIFY4_RENAME_ENTRY will be generated as a result of this operation. When oldname and rename refer to the same file, no notification is generated (because, as <xreftarget="OP_RENAME_DESCRIPTION"/>target="OP_RENAME_DESCRIPTION" format="default"/> states, the serverMUST<bcp14>MUST</bcp14> take no action). When a file is removed because it has the same name as the target, if that removal is done atomically with the rename, a NOTIFY4_REMOVE_ENTRY notification will not be generated. Instead, the deletion of the file will be reported as part of the NOTIFY4_RENAME_ENTRY notification. </t> <t> When the current and saved filehandles are not the same:<list style="symbols"> <t></t> <ul spacing="normal"> <li> If the current filehandle designates a directory for which one or more directory delegations exist, then, when those delegations request such notifications, NOTIFY4_ADD_ENTRY will be generated as a result of this operation. When a file is removed because it has the same name as the target, if that removal is done atomically with the rename, a NOTIFY4_REMOVE_ENTRY notification will not be generated. Instead, the deletion of the file will be reported as part of the NOTIFY4_ADD_ENTRY notification.</t> <t></li> <li> If the saved filehandle designates a directory for which one or more directory delegations exist, then, when those delegations request such notifications, NOTIFY4_REMOVE_ENTRY will be generated as a result of this operation.</t> </list> </t></li> </ul> <t> If the object being renamed has file delegations held by clients other than the one doing the RENAME, the delegationsMUST<bcp14>MUST</bcp14> be recalled, and the operation cannot proceed until each such delegation is returned or revoked. Note that in the case of multiply linked files, the delegation recall requirement applies even if the delegation was obtained through a different name than the one being renamed. In all cases in which delegations are recalled, the server is likely to return one or more NFS4ERR_DELAY errors while the delegation(s) remains outstanding, although it might not do that if the delegations are returned quickly. </t> <t> The RENAME operation must be atomic to the client. The statement "source and target directoriesMUST<bcp14>MUST</bcp14> reside on the same file system on the server" means that the fsid fields in the attributes for the directories are the same. If they reside on different file systems, the error NFS4ERR_XDEV is returned. </t> <t> Based on the value of the fh_expire_type attribute for the object, the filehandle may or may not expire on a RENAME. However, server implementors are strongly encouraged to attempt to keep filehandles from expiring in this fashion. </t> <t> On some servers, the file names "." and ".." are illegal as either oldname or newname, and will result in the error NFS4ERR_BADNAME. In addition, on many servers the case of oldname or newname being an alias for the source directory will be checked for. Such servers will return the error NFS4ERR_INVAL in these cases. </t> <t> If either of the source or target filehandles are not directories, the server will return NFS4ERR_NOTDIR. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_RESTOREFH"title="Operationnumbered="true" toc="default"> <name>Operation 31: RESTOREFH - Restore SavedFilehandle" >Filehandle</name> <section toc="exclude" anchor="OP_RESTOREFH_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* SAVED_FH: */void; </artwork> </figure>void;]]></sourcecode> </section> <section toc="exclude" anchor="OP_RESTOREFH_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct RESTOREFH4res { /* * If status is NFS4_OK, * new CURRENT_FH: value of saved fh */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_RESTOREFH_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The RESTOREFH operation sets the current filehandle and stateid to the values in the saved filehandle and stateid. If there is no saved filehandle, then the server will return the error NFS4ERR_NOFILEHANDLE. </t> <t> See <xreftarget="current_filehandle"/>target="current_filehandle" format="default"/> for more details on the current filehandle. </t> <t> See <xreftarget="current_stateid"/>target="current_stateid" format="default"/> for more details on the current stateid. </t> </section> <section toc="exclude" anchor="OP_RESTOREFH_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Operations like OPEN and LOOKUP use the current filehandle to represent a directory and replace it with a new filehandle. Assuming that the previous filehandle was saved with a SAVEFH operator, the previous filehandle can be restored as the current filehandle. This is commonly used to obtain post-operation attributes for the directory, e.g.,<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ PUTFH (directory filehandle) SAVEFH GETATTR attrbits (pre-op dir attrs) CREATE optbits "foo" attrs GETATTR attrbits (file attributes) RESTOREFH GETATTR attrbits (post-op dirattrs) </artwork> </figure> </t>attrs)]]></sourcecode> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_SAVEFH"title="Operationnumbered="true" toc="default"> <name>Operation 32: SAVEFH - Save CurrentFilehandle" >Filehandle</name> <section toc="exclude" anchor="OP_SAVEFH_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ /* CURRENT_FH: */void; </artwork> </figure>void;]]></sourcecode> </section> <section toc="exclude" anchor="OP_SAVEFH_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct SAVEFH4res { /* * If status is NFS4_OK, * new SAVED_FH: value of current fh */ nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SAVEFH_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The SAVEFH operation saves the current filehandle and stateid. If a previous filehandle was saved, then it is no longer accessible. The saved filehandle can be restored as the current filehandle with the RESTOREFH operator. </t> <t> On success, the current filehandle retains its value. </t> <t> See <xreftarget="current_filehandle"/>target="current_filehandle" format="default"/> for more details on the current filehandle. </t> <t> See <xreftarget="current_stateid"/>target="current_stateid" format="default"/> for more details on the current stateid. </t> </section> <section toc="exclude" anchor="OP_SAVEFH_IMPLEMENTATION"title="IMPLEMENTATION"> <t> </t>numbered="true"> <name>IMPLEMENTATION</name> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_SECINFO"title="Operationnumbered="true" toc="default"> <name>Operation 33: SECINFO - Obtain AvailableSecurity" >Security</name> <section toc="exclude" anchor="OP_SECINFO_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct SECINFO4args { /* CURRENT_FH: directory */ component4 name;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SECINFO_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ /* * From RFC 2203 */ enum rpc_gss_svc_t { RPC_GSS_SVC_NONE = 1, RPC_GSS_SVC_INTEGRITY = 2, RPC_GSS_SVC_PRIVACY = 3 }; struct rpcsec_gss_info { sec_oid4 oid; qop4 qop; rpc_gss_svc_t service; }; /* RPCSEC_GSS has a value of '6' - See RFC 2203 */ union secinfo4 switch (uint32_t flavor) { case RPCSEC_GSS: rpcsec_gss_info flavor_info; default: void; }; typedef secinfo4SECINFO4resok<>;SECINFO4resok<>; union SECINFO4res switch (nfsstat4 status) { case NFS4_OK: /* CURRENTFH: consumed */ SECINFO4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SECINFO_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The SECINFO operation is used by the client to obtain a list of valid RPC authentication flavors for a specific directory filehandle, file name pair. SECINFO should apply the same access methodology used for LOOKUP when evaluating the name. Therefore, if the requester does not have the appropriate access to LOOKUP the name, then SECINFOMUST<bcp14>MUST</bcp14> behave the same way and return NFS4ERR_ACCESS. </t> <t> The result will contain an array that represents the security mechanisms available, with an order corresponding to the server's preferences, the most preferred being first in the array. The client is free to pick whatever security mechanism it both desires and supports, or to pick in the server's preference order the first one it supports. The array entries are represented by the secinfo4 structure. The field 'flavor' will contain a value of AUTH_NONE, AUTH_SYS (as defined in <xreftarget="RFC5531">RFCtarget="RFC5531" format="default">RFC 5531</xref>), or RPCSEC_GSS (as defined in <xreftarget="RFC2203">RFCtarget="RFC2203" format="default">RFC 2203</xref>). The field flavor can also be any other security flavor registered with IANA. </t> <t> For the flavors AUTH_NONE and AUTH_SYS, no additional security information is returned. The same is true of many (if not most) other security flavors, including AUTH_DH. For a return value of RPCSEC_GSS, a security triple is returned that contains the mechanism object identifier (OID, as defined in <xreftarget="RFC2743">RFCtarget="RFC2743" format="default">RFC 2743</xref>), the quality of protection (as defined in <xreftarget="RFC2743">RFCtarget="RFC2743" format="default">RFC 2743</xref>), and the service type (as defined in <xreftarget="RFC2203">RFCtarget="RFC2203" format="default">RFC 2203</xref>). It is possible for SECINFO to return multiple entries with flavor equal to RPCSEC_GSS with different security triple values. </t> <t> On success, the current filehandle is consumed (see <xref target="aftersecinfo"/>),format="default"/>), and if the next operation after SECINFO tries to use the current filehandle, that operation will fail with the status NFS4ERR_NOFILEHANDLE. </t> <t> If the name has a length of zero, or if the name does not obey the UTF-8 definition (assuming UTF-8 capabilities are enabled; see <xreftarget="utf8_caps"/>),target="utf8_caps" format="default"/>), the error NFS4ERR_INVAL will be returned. </t> <t> See <xreftarget="Security_Service_Negotiation"/>target="Security_Service_Negotiation" format="default"/> for additional information on the use of SECINFO. </t> </section> <section toc="exclude" anchor="OP_SECINFO_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The SECINFO operation is expected to be used by the NFS client when the error value of NFS4ERR_WRONGSEC is returned from another NFS operation. This signifies to the client that theserver'sserver's security policy is different from what the client is currently using. At this point, the client is expected to obtain a list of possible security flavors and choose what best suits its policies. </t> <t> As mentioned, theserver'sserver's security policies will determine when a client request receives NFS4ERR_WRONGSEC. See <xreftarget="error_op_returns"/>target="error_op_returns" format="default"/> for a list of operations that can return NFS4ERR_WRONGSEC. In addition, when READDIR returns attributes, the rdattr_error (<xref target="attrdef_rdattr_error"/>)format="default"/>) can contain NFS4ERR_WRONGSEC. Note that CREATE and REMOVEMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC. The rationale for CREATE is that unless the target name exists, it cannot have a separate security policy from the parent directory, and the security policy of the parent was checked when its filehandle was injected into the COMPOUND request's operations stream (for similar reasons, an OPEN operation that creates the targetMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC). If the target name exists, while it might have a separate security policy, that is irrelevant because CREATEMUST<bcp14>MUST</bcp14> return NFS4ERR_EXIST. The rationale for REMOVE is that while that target might have a separate security policy, the target is going to be removed, and so the security policy of the parent trumps that of the object being removed. RENAME and LINKMAY<bcp14>MAY</bcp14> return NFS4ERR_WRONGSEC, but the NFS4ERR_WRONGSEC error applies only to the saved filehandle (see <xreftarget="link_rename"/>).target="link_rename" format="default"/>). Any NFS4ERR_WRONGSEC error on the current filehandle used by LINK and RENAMEMUST<bcp14>MUST</bcp14> be returned by the PUTFH, PUTPUBFH, PUTROOTFH, or RESTOREFH operation that injected the current filehandle. </t> <t> With the exception of LINK and RENAME, the set of operations that can return NFS4ERR_WRONGSEC represents the point at which the client can inject a filehandle into the "current filehandle" at the server. The filehandle is either provided by the client (PUTFH, PUTPUBFH, PUTROOTFH), generated as a result of a name-to-filehandle translation (LOOKUP and OPEN), or generated from the saved filehandle via RESTOREFH. As <xreftarget="PUTFHplusSAVEFH"/>target="PUTFHplusSAVEFH" format="default"/> states, a put filehandle operation followed by SAVEFHMUST NOT<bcp14>MUST NOT</bcp14> return NFS4ERR_WRONGSEC. Thus, the RESTOREFH operation, under certain conditions (see <xreftarget="putfh_series"/>),target="putfh_series" format="default"/>), is permitted to return NFS4ERR_WRONGSEC so that security policies can be honored. </t> <t> The READDIR operation will not directly return the NFS4ERR_WRONGSEC error. However, if the READDIR request included a request for attributes, it is possible that the READDIRrequest'srequest's security triple did not match that of a directory entry. If this is the case and the client has requested the rdattr_error attribute, the server will return the NFS4ERR_WRONGSEC error in rdattr_error for the entry. </t> <t> To resolve an error return of NFS4ERR_WRONGSEC, the client does the following: </t><t> <list style="symbols"> <t><ul spacing="normal"> <li> For LOOKUP and OPEN, the client will use SECINFO with the same current filehandle and name as provided in the original LOOKUP or OPEN to enumerate the available security triples.</t> <t></li> <li> For the rdattr_error, the client will use SECINFO with the same current filehandle as provided in the original READDIR. The name passed to SECINFO will be that of the directory entry (as returned from READDIR) that had the NFS4ERR_WRONGSEC error in the rdattr_error attribute.</t></li> <li> <t> For PUTFH, PUTROOTFH, PUTPUBFH, RESTOREFH, LINK, and RENAME, the client will use SECINFO_NO_NAME { style = SECINFO_STYLE4_CURRENT_FH }. The client will prefix the SECINFO_NO_NAME operation with the appropriate PUTFH, PUTPUBFH, or PUTROOTFH operation that provides the filehandle originally provided by the PUTFH, PUTPUBFH, PUTROOTFH, or RESTOREFH operation.<vspace blankLines='1' /></t> <t> NOTE: In NFSv4.0, the client was required to use SECINFO, and had to reconstruct the parent of the original filehandle and the component name of the original filehandle. The introduction in NFSv4.1 of SECINFO_NO_NAME obviates the need for reconstruction. </t><t></li> <li> For LOOKUPP, the client will use SECINFO_NO_NAME { style = SECINFO_STYLE4_PARENT } and provide the filehandle that equals the filehandle originally provided to LOOKUPP.</t> </list> </t></li> </ul> <t> See <xreftarget="SECCON"/>target="SECCON" format="default"/> for a discussion on the recommendations for the security flavor used by SECINFO and SECINFO_NO_NAME. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_SETATTR"title="Operationnumbered="true" toc="default"> <name>Operation 34: SETATTR - SetAttributes" >Attributes</name> <section toc="exclude" anchor="OP_SETATTR_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct SETATTR4args { /* CURRENT_FH: target object */ stateid4 stateid; fattr4 obj_attributes;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SETATTR_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct SETATTR4res { nfsstat4 status; bitmap4 attrsset;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SETATTR_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The SETATTR operation changes one or more of the attributes of a file system object. The new attributes are specified with a bitmap and the attributes that follow the bitmap in bit order. </t> <t> The stateid argument for SETATTR is used to provide byte-range locking context that is necessary for SETATTR requests that set the size attribute. Since setting the size attribute modifies the file's data, it has the same locking requirements as a corresponding WRITE. Any SETATTR that sets the size attribute is incompatible with a share reservation that specifies OPEN4_SHARE_DENY_WRITE. The area between the old end-of-file and the new end-of-file is considered to be modified just as would have been the case had the area in question been specified as the target of WRITE, for the purpose of checking conflicts with byte-range locks, for those cases in which a server is implementing mandatory byte-range locking behavior. A valid stateidSHOULD<bcp14>SHOULD</bcp14> always be specified. When the file size attribute is not set, the special stateid consisting of all bits equal to zeroMAY<bcp14>MAY</bcp14> be passed. </t> <t> On either success or failure of the operation, the server will return the attrsset bitmask to represent what (if any) attributes were successfully set. The attrsset in the response is a subset of the attrmask field of the obj_attributes field in the argument. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_SETATTR_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the request specifies the owner attribute to be set, the serverSHOULD<bcp14>SHOULD</bcp14> allow the operation to succeed if the current owner of the object matches the value specified in the request. Some servers may be implemented in a way as to prohibit the setting of the owner attribute unless the requester has privilege to do so. If the server is lenient in this one case of matching owner values, the client implementation may be simplified in cases of creation of an object (e.g., an exclusive create via OPEN) followed by a SETATTR. </t> <t> The file size attribute is used to request changes to the size of a file. A value of zero causes the file to be truncated, a value less than the current size of the file causes data from new size to the end of the file to be discarded, and a size greater than the current size of the file causes logically zeroed data bytes to be added to the end of the file. Servers are free to implement this using unallocated bytes (holes) or allocated data bytes set to zero. Clients should not make any assumptions regarding a server's implementation of this feature, beyond that the bytes in the affected byte-range returned by READ will be zeroed. ServersMUST<bcp14>MUST</bcp14> support extending the file size via SETATTR. </t> <t> SETATTR is not guaranteed to be atomic. A failed SETATTR may partially change a file's attributes, hence the reason why the reply always includes the status and the list of attributes that were set. </t> <t> If the object whose attributes are being changed has a file delegation that is held by a client other than the one doing the SETATTR, the delegation(s) must be recalled, and the operation cannot proceed to actually change an attribute until each such delegation is returned or revoked. In all cases in which delegations are recalled, the server is likely to return one or more NFS4ERR_DELAY errors while the delegation(s) remains outstanding, although it might not do that if the delegations are returned quickly. </t> <t> If the object whose attributes are being set is a directory and another client holds a directory delegation for that directory, then if enabled, asynchronous notifications will be generated when the set of attributes changed has a non-null intersection with the set of attributes for which notification is requested. Notifications of type NOTIFY4_CHANGE_DIR_ATTRS will be sent to the appropriate client(s), but the SETATTR is not delayed by waiting for these notifications to be sent. </t> <t> If the object whose attributes are being set is a member of the directory for which another client holds a directory delegation, then asynchronous notifications will be generated when the set of attributes changed has a non-null intersection with the set of attributes for which notification is requested. Notifications of type NOTIFY4_CHANGE_CHILD_ATTRS will be sent to the appropriate clients, but the SETATTR is not delayed by waiting for these notifications to be sent. </t> <t> Changing the size of a file with SETATTR indirectly changes the time_modify and change attributes. A client must account for this as size changes can result in data deletion. </t> <t> The attributes time_access_set and time_modify_set are write-only attributes constructed as a switched union so the client can direct the server in setting the time values. If the switched union specifies SET_TO_CLIENT_TIME4, the client has provided an nfstime4 to be used for the operation. If the switch union does not specify SET_TO_CLIENT_TIME4, the server is to use its current time for the SETATTR operation. </t> <t> If server and client times differ, programs that compare client time to file times can break. A time synchronization protocol should be used to limit client/server time skew. </t> <t> Use of a COMPOUND containing a VERIFY operation specifying only the change attribute, immediately followed by a SETATTR, provides a means whereby a client may specify a request that emulates the functionality of the SETATTR guard mechanism of NFSv3. Since the function of the guard mechanism is to avoid changes to the file attributes based on stale information, delays between checking of the guard condition and the setting of the attributes have the potential to compromise this function, as would the corresponding delay in the NFSv4 emulation. Therefore, NFSv4.1 serversSHOULD<bcp14>SHOULD</bcp14> take care to avoid such delays, to the degree possible, when executing such a request. </t> <t> If the server does not support an attribute as requested by the client, the serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_ATTRNOTSUPP. </t> <t> A mask of the attributes actually set is returned by SETATTR in all cases. That maskMUST NOT<bcp14>MUST NOT</bcp14> include attribute bits not requested to be set by the client. If the attribute masks in the request and reply are equal, the status field in the replyMUST<bcp14>MUST</bcp14> be NFS4_OK. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_VERIFY"title="Operationnumbered="true" toc="default"> <name>Operation 37: VERIFY - Verify SameAttributes" >Attributes</name> <section toc="exclude" anchor="OP_VERIFY_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ struct VERIFY4args { /* CURRENT_FH: object */ fattr4 obj_attributes;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_VERIFY_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct VERIFY4res { nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_VERIFY_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The VERIFY operation is used to verify that attributes have the value assumed by the client before proceeding with the following operations in the COMPOUND request. If any of the attributes do not match, then the error NFS4ERR_NOT_SAME must be returned. The current filehandle retains its value after successful completion of the operation. </t> </section> <section toc="exclude" anchor="OP_VERIFY_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> One possible use of the VERIFY operation is the following series of operations. With this, the client is attempting to verify that the file being removed will match what the client expects to be removed. This series can help prevent the unintended deletion of a file.<figure> <artwork></t> <sourcecode type="xdr"><![CDATA[ PUTFH (directory filehandle) LOOKUP (file name) VERIFY (filehandle == fh) PUTFH (directory filehandle) REMOVE (filename) </artwork> </figure>name)]]></sourcecode> <t> This series does not prevent a second client from removing and creating a new file in the middle of this sequence, but it does help avoid the unintended result. </t> <t> In the case that aRECOMMENDED<bcp14>RECOMMENDED</bcp14> attribute is specified in the VERIFY operation and the server does not support that attribute for the file system object, the error NFS4ERR_ATTRNOTSUPP is returned to the client. </t> <t> When the attribute rdattr_error or any set-only attribute (e.g., time_modify_set) is specified, the error NFS4ERR_INVAL is returned to the client. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_WRITE"title="Operationnumbered="true" toc="default"> <name>Operation 38: WRITE - Write toFile" >File</name> <section toc="exclude" anchor="OP_WRITE_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ enum stable_how4 { UNSTABLE4 = 0, DATA_SYNC4 = 1, FILE_SYNC4 = 2 }; struct WRITE4args { /* CURRENT_FH: file */ stateid4 stateid; offset4 offset; stable_how4 stable; opaquedata<>; }; </artwork> </figure>data<>; };]]></sourcecode> </section> <section toc="exclude" anchor="OP_WRITE_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct WRITE4resok { count4 count; stable_how4 committed; verifier4 writeverf; }; union WRITE4res switch (nfsstat4 status) { case NFS4_OK: WRITE4resok resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_WRITE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The WRITE operation is used to write data to a regular file. The target file is specified by the current filehandle. The offset specifies the offset where the data should be written. An offset of zero specifies that the write should start at the beginning of the file. The count, as encoded as part of the opaque data parameter, represents the number of bytes of data that are to be written. If the count is zero, the WRITE will succeed and return a count of zero subject to permissions checking. The serverMAY<bcp14>MAY</bcp14> write fewer bytes than requested by the client. </t> <t> The client specifies with the stable parameter the method of how the data is to be processed by the server. If stable is FILE_SYNC4, the serverMUST<bcp14>MUST</bcp14> commit the data written plus all file system metadata to stable storage before returning results. This corresponds to the NFSv2 protocol semantics. Any other behavior constitutes a protocol violation. If stable is DATA_SYNC4, then the serverMUST<bcp14>MUST</bcp14> commit all of the data to stable storage and enough of the metadata to retrieve the data before returning. The server implementor is free to implement DATA_SYNC4 in the same fashion as FILE_SYNC4, but with a possible performance drop. If stable is UNSTABLE4, the server is free to commit any part of the data and the metadata to stable storage, including all or none, before returning a reply to the client. There is no guarantee whether or when any uncommitted data will subsequently be committed to stable storage. The only guarantees made by the server are that it will not destroy any data without changing the value of writeverf and that it will not commit the data and metadata at a level less than that requested by the client. </t> <t> Except when special stateids are used, the stateid value for a WRITE request represents a value returned from a previous byte-range LOCK or OPEN request or the stateid associated with a delegation. The stateid identifies the associated owners if any and is used by the server to verify that the associated locks are still valid (e.g., have not been revoked). </t> <t> Upon successful completion, the following results are returned. The count result is the number of bytes of data written to the file. The server may write fewer bytes than requested. If so, the actual number of bytes written starting at location, offset, is returned. </t> <t> The server also returns an indication of the level of commitment of the data and metadata via committed. Per <xreftarget="stable_committed"/>, <list style='symbols'> <t>target="stable_committed" format="default"/>, </t> <ul spacing="normal"> <li> The serverMAY<bcp14>MAY</bcp14> commit the data at a stronger level than requested.</t> <t></li> <li> The serverMUST<bcp14>MUST</bcp14> commit the data at a level at least as high as that committed.</t> </list> </t> <texttable anchor="stable_committed"> <preamble> Valid combinations</li> </ul> <table anchor="stable_committed" align="center"> <name>Valid Combinations of thefields stableFields Stable in therequestRequest andcommittedCommitted in thereply. </preamble> <ttcol>stable</ttcol> <ttcol>committed</ttcol> <c>UNSTABLE4</c> <c>FILE_SYNC4,Reply</name> <thead> <tr> <th align="left">stable</th> <th align="left">committed</th> </tr> </thead> <tbody> <tr> <td align="left">UNSTABLE4</td> <td align="left">FILE_SYNC4, DATA_SYNC4,UNSTABLE4</c> <c>DATA_SYNC4</c> <c>FILE_SYNC4, DATA_SYNC4</c> <c>FILE_SYNC4</c> <c>FILE_SYNC4</c> </texttable>UNSTABLE4</td> </tr> <tr> <td align="left">DATA_SYNC4</td> <td align="left">FILE_SYNC4, DATA_SYNC4</td> </tr> <tr> <td align="left">FILE_SYNC4</td> <td align="left">FILE_SYNC4</td> </tr> </tbody> </table> <t> The final portion of the result is the field writeverf. This field is the write verifier and is a cookie that the client can use to determine whether a server has changed instance state (e.g., server restart) between a call to WRITE and a subsequent call to either WRITE or COMMIT. This cookieMUST<bcp14>MUST</bcp14> be unchanged during a single instance of the NFSv4.1 server andMUST<bcp14>MUST</bcp14> be unique between instances of the NFSv4.1 server. If the cookie changes, then the clientMUST<bcp14>MUST</bcp14> assume that any data written with an UNSTABLE4 value for committed and an old writeverf in the reply has been lost and will need to be recovered. </t> <t> If a client writes data to the server with the stable argument set to UNSTABLE4 and the reply yields a committed response of DATA_SYNC4 or UNSTABLE4, the client will follow up some time in the future with a COMMIT operation to synchronize outstanding asynchronous data and metadata with the server's stable storage, barring client error. It is possible that due to client crash or other error that a subsequent COMMIT will not be received by the server. </t> <t> For a WRITE with a stateid value of all bits equal to zero, the serverMAY<bcp14>MAY</bcp14> allow the WRITE to be serviced subject to mandatory byte-range locks or the current share deny modes for the file. For a WRITE with a stateid value of all bits equal to 1, the serverMUST NOT<bcp14>MUST NOT</bcp14> allow the WRITE operation to bypass locking checks at the server and otherwise is treated as if a stateid of all bits equal to zero were used. </t> <t> On success, the current filehandle retains its value. </t> </section> <section toc="exclude" anchor="OP_WRITE_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> It is possible for the server to write fewer bytes of data than requested by the client. In this case, the serverSHOULD NOT<bcp14>SHOULD NOT</bcp14> return an error unless no data was written at all. If the server writes less than the number of bytes specified, the client will need to send another WRITE to write the remaining data. </t> <t> It is assumed that the act of writing data to a file will cause the time_modified and change attributes of the file to be updated. However, these attributesSHOULD NOT<bcp14>SHOULD NOT</bcp14> be changed unless the contents of the file are changed. Thus, a WRITE request with count set to zeroSHOULD NOT<bcp14>SHOULD NOT</bcp14> cause the time_modified and change attributes of the file to be updated. </t> <t> Stable storage is persistent storage that survives: </t><t> <list style="numbers"> <t><ol spacing="normal" type="1"> <li> Repeated power failures.</t> <t></li> <li> Hardware failures (of any board, power supply, etc.).</t> <t></li> <li> Repeated software crashes and restarts.</t> </list> </t></li> </ol> <t> This definition does not address failure of the stable storage module itself. </t> <t> The verifier is defined to allow a client to detect different instances of an NFSv4.1 protocol server over which cached, uncommitted data may be lost. In the most likely case, the verifier allows the client to detect server restarts. This information is required so that the client can safely determine whether the server could have lost cached data. If the server fails unexpectedly and the client has uncommitted data from previous WRITE requests (done with the stable argument set to UNSTABLE4 and in which the result committed was returned as UNSTABLE4 as well), the server might not have flushed cached data to stable storage. The burden of recovery is on the client, and the client will need to retransmit the data to the server. </t> <t> A suggested verifier would be to use the time that the server was last started (if restarting the server results in lost buffers). </t> <t> The reply's committed field allows the client to do more effective caching. If the server is committing all WRITE requests to stable storage, then itSHOULD<bcp14>SHOULD</bcp14> return with committed set to FILE_SYNC4, regardless of the value of the stable field in the arguments. A server that uses an NVRAM accelerator may choose to implement this policy. The client can use this to increase the effectiveness of the cache by discarding cached data that has already been committed on the server. </t> <t> Some implementations may return NFS4ERR_NOSPC instead of NFS4ERR_DQUOT when a user's quota is exceeded. </t> <t> In the case that the current filehandle is of type NF4DIR, the server will return NFS4ERR_ISDIR. If the current file is a symbolic link, the error NFS4ERR_SYMLINK will be returned. Otherwise, if the current filehandle does not designate an ordinary file, the server will return NFS4ERR_WRONG_TYPE. </t> <t> If mandatory byte-range locking is in effect for the file, and the corresponding byte-range of the data to be written to the file is READ_LT or WRITE_LT locked by an owner that is not associated with the stateid, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_LOCKED. If so, the clientMUST<bcp14>MUST</bcp14> check if the owner corresponding to the stateid used with the WRITE operation has a conflicting READ_LT lock that overlaps with the byte-range that was to be written. If the stateid's owner has no conflicting READ_LT lock, then the clientSHOULD<bcp14>SHOULD</bcp14> try to get the appropriate write byte-range lock via the LOCK operation before re-attempting the WRITE. When the WRITE completes, the clientSHOULD<bcp14>SHOULD</bcp14> release the byte-range lock via LOCKU. </t> <t> If the stateid's owner had a conflicting READ_LT lock, then the client has no choice but to return an error to the application that attempted the WRITE. The reason is that since the stateid's owner had a READ_LT lock, either the server attempted to temporarily effectively upgrade this READ_LT lock to a WRITE_LT lock or the server has no upgrade capability. If the server attempted to upgrade the READ_LT lock and failed, it is pointless for the client to re-attempt the upgrade via the LOCK operation, because there might be another client also trying to upgrade. If two clients are blocked trying to upgrade the same lock, the clients deadlock. If the server has no upgrade capability, then it is pointless to try a LOCK operation to upgrade. </t> <t> If one or more other clients have delegations for the file being written, those delegationsMUST<bcp14>MUST</bcp14> be recalled, and the operation cannot proceed until those delegations are returned or revoked. Except where this happens very quickly, one or more NFS4ERR_DELAY errors will be returned to requests made while the delegation remains outstanding. Normally, delegations will not be recalled as a result of a WRITE operation since the recall will occur as a result of an earlier OPEN. However, since it is possible for a WRITE to be done with a special stateid, the server needs to check for this case even though the client should have done an OPEN previously. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_BACKCHANNEL_CTL"title="Operationnumbered="true" toc="default"> <name>Operation 40: BACKCHANNEL_CTL - BackchannelControl" >Control</name> <section toc="exclude" anchor="OP_BACKCHANNEL_CTL_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ typedef opaquegsshandle4_t<>;gsshandle4_t<>; struct gss_cb_handles4 { rpc_gss_svc_t gcbp_service; /* RFC 2203 */ gsshandle4_t gcbp_handle_from_server; gsshandle4_t gcbp_handle_from_client; }; union callback_sec_parms4 switch (uint32_t cb_secflavor) { case AUTH_NONE: void; case AUTH_SYS: authsys_parms cbsp_sys_cred; /* RFC18315531 */ case RPCSEC_GSS: gss_cb_handles4 cbsp_gss_handles; }; struct BACKCHANNEL_CTL4args { uint32_t bca_cb_program; callback_sec_parms4bca_sec_parms<>; }; </artwork> </figure>bca_sec_parms<>; };]]></sourcecode> </section> <section toc="exclude" anchor="OP_BACKCHANNEL_CTL_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct BACKCHANNEL_CTL4res { nfsstat4 bcr_status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_BACKCHANNEL_CTL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The BACKCHANNEL_CTL operation replaces the backchannel's callback program number and adds (not replaces) RPCSEC_GSS handles for use by the backchannel. </t> <t> The arguments of the BACKCHANNEL_CTL call are a subset of the CREATE_SESSION parameters. In the arguments of BACKCHANNEL_CTL, the bca_cb_program field and bca_sec_parms fields correspond respectively to the csa_cb_program and csa_sec_parms fields of the arguments of CREATE_SESSION (<xreftarget="OP_CREATE_SESSION"/>).target="OP_CREATE_SESSION" format="default"/>). </t> <t> BACKCHANNEL_CTLMUST<bcp14>MUST</bcp14> appear in a COMPOUND that starts with SEQUENCE. </t> <t> If the RPCSEC_GSS handle identified by gcbp_handle_from_server does not exist on the server, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOENT. </t> <t> If an RPCSEC_GSS handle is using the SSV context (see <xreftarget="ssv_mech"/>),target="ssv_mech" format="default"/>), then because each SSV RPCSEC_GSS handle shares a common SSV GSS context, there are security considerations specific to this situation discussed in <xreftarget="rpcsec_ssv_consider"/>.target="rpcsec_ssv_consider" format="default"/>. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_BIND_CONN_TO_SESSION"title="Operationnumbered="true" toc="default"> <name>Operation 41: BIND_CONN_TO_SESSION - Associate Connection withSession" >Session</name> <section toc="exclude" anchor="OP_BIND_CONN_TO_SESSION_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ enum channel_dir_from_client4 { CDFC4_FORE = 0x1, CDFC4_BACK = 0x2, CDFC4_FORE_OR_BOTH = 0x3, CDFC4_BACK_OR_BOTH = 0x7 }; struct BIND_CONN_TO_SESSION4args { sessionid4 bctsa_sessid; channel_dir_from_client4 bctsa_dir; bool bctsa_use_conn_in_rdma_mode;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_BIND_CONN_TO_SESSION_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ enum channel_dir_from_server4 { CDFS4_FORE = 0x1, CDFS4_BACK = 0x2, CDFS4_BOTH = 0x3 }; struct BIND_CONN_TO_SESSION4resok { sessionid4 bctsr_sessid; channel_dir_from_server4 bctsr_dir; bool bctsr_use_conn_in_rdma_mode; }; union BIND_CONN_TO_SESSION4res switch (nfsstat4 bctsr_status) { case NFS4_OK: BIND_CONN_TO_SESSION4resok bctsr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_BIND_CONN_TO_SESSION_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> BIND_CONN_TO_SESSION is used to associate additional connections with a session. ItMUST<bcp14>MUST</bcp14> be used on the connection being associated with the session. ItMUST<bcp14>MUST</bcp14> be the only operation in the COMPOUND procedure. If SP4_NONE (<xref target="OP_EXCHANGE_ID"/>)format="default"/>) state protection is used, any principal, security flavor, or RPCSEC_GSS contextMAY<bcp14>MAY</bcp14> be used to invoke the operation. If SP4_MACH_CRED is used, RPCSEC_GSSMUST<bcp14>MUST</bcp14> be used with the integrity or privacy services, using the principal that created the client ID. If SP4_SSV is used, RPCSEC_GSS with the SSV GSS mechanism (<xref target="ssv_mech"/>)format="default"/>) and integrity or privacyMUST<bcp14>MUST</bcp14> be used. </t> <t> If, when the client ID was created, the client opted for SP4_NONE state protection, the client is not required to use BIND_CONN_TO_SESSION to associate the connection with the session, unless the client wishes to associate the connection with the backchannel. When SP4_NONE protection is used, simply sending a COMPOUND request with a SEQUENCE operation is sufficient to associate the connection with the session specified in SEQUENCE. </t> <t> The field bctsa_dir indicates whether the client wants to associate the connection with the fore channel or the backchannel or both channels. The value CDFC4_FORE_OR_BOTH indicates that the client wants to associate the connection with both the fore channel and backchannel, but will accept the connection being associated to just the fore channel. The value CDFC4_BACK_OR_BOTH indicates that the client wants to associate with both the fore channel and backchannel, but will accept the connection being associated with just the backchannel. The server replies in bctsr_dir which channel(s) the connection is associated with. If the client specified CDFC4_FORE, the serverMUST<bcp14>MUST</bcp14> return CDFS4_FORE. If the client specified CDFC4_BACK, the serverMUST<bcp14>MUST</bcp14> return CDFS4_BACK. If the client specified CDFC4_FORE_OR_BOTH, the serverMUST<bcp14>MUST</bcp14> return CDFS4_FORE or CDFS4_BOTH. If the client specified CDFC4_BACK_OR_BOTH, the serverMUST<bcp14>MUST</bcp14> return CDFS4_BACK or CDFS4_BOTH. </t> <t> See the CREATE_SESSION operation (<xref target="OP_CREATE_SESSION"/>),format="default"/>), and the description of the argument csa_use_conn_in_rdma_mode to understand bctsa_use_conn_in_rdma_mode, and the description of csr_use_conn_in_rdma_mode to understand bctsr_use_conn_in_rdma_mode. </t> <t> Invoking BIND_CONN_TO_SESSION on a connection already associated with the specified session has no effect, and the serverMUST<bcp14>MUST</bcp14> respond with NFS4_OK, unless the client is demanding changes to the set of channels the connection is associated with. If so, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t> </section> <section toc="exclude" anchor="OP_BIND_CONN_TO_SESSION_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If a session's channel loses all connections, depending on the client ID's state protection and type of channel, the client might need to use BIND_CONN_TO_SESSION to associate a new connection. If the server restarted and does not keep the reply cache in stable storage, the server will not recognize the session ID. The client will ultimately have to invoke EXCHANGE_ID to create a new client ID and session. </t> <t> Suppose SP4_SSV state protection is being used, and BIND_CONN_TO_SESSION is among the operations included in the spo_must_enforce set when the client ID was created (<xreftarget="OP_EXCHANGE_ID"/>).target="OP_EXCHANGE_ID" format="default"/>). If so, there is an issue if SET_SSV is sent, no response is returned, and the last connection associated with the client ID drops. The client, per the sessions model,MUST<bcp14>MUST</bcp14> retry the SET_SSV. But it needs a new connection to do so, andMUST<bcp14>MUST</bcp14> associate that connection with the session via a BIND_CONN_TO_SESSION authenticated with the SSV GSS mechanism. The problem is that the RPCSEC_GSS message integrity codes use a subkey derived from the SSV as the key and the SSV may have changed. While there are multiple recovery strategies, a single, general strategy is described here.<list style='symbols'> <t></t> <ul spacing="normal"> <li> The client reconnects.</t> <t></li> <li> The client assumes that the SET_SSV was executed, and so sends BIND_CONN_TO_SESSION with the subkey (derived from the new SSV, i.e., what SET_SSV would have set the SSV to) used as the key for the RPCSEC_GSS credential message integrity codes.</t> <t></li> <li> If the request succeeds, this means that the original attempted SET_SSV did execute successfully. The client re-sends the original SET_SSV, which the server will reply to via the reply cache.</t> <t></li> <li> If the server returns an RPC authentication error, this means that the server's current SSV was not changed (and the SET_SSV was likely not executed). The client then tries BIND_CONN_TO_SESSION with the subkey derived from the old SSV as the key for the RPCSEC_GSS message integrity codes.</t> <t></li> <li> The attempted BIND_CONN_TO_SESSION with the old SSV should succeed. If so, the client re-sends the original SET_SSV. If the original SET_SSV was not executed, then the server executes it. If the original SET_SSV was executed but failed, the server will return the SET_SSV from the reply cache.</t> </list> </t></li> </ul> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --><sectiontitle="Operationanchor="OP_EXCHANGE_ID" numbered="true" toc="default"> <name>Operation 42: EXCHANGE_ID - Instantiate ClientID" anchor="OP_EXCHANGE_ID">ID</name> <t> The EXCHANGE_ID operation exchanges long-hand client and server identifiers(owners),(owners) and provides access to a client ID, creating one if necessary. This client ID becomes associated with the connection on which the operation is done, so that it is available when a CREATE_SESSION is done or when the connection is used to issue a request on an existing session associated with the current client. </t> <sectiontitle="ARGUMENT"anchor="EXID-arg"toc="exclude"> <t> <figure> <artwork>toc="exclude" numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ const EXCHGID4_FLAG_SUPP_MOVED_REFER = 0x00000001; const EXCHGID4_FLAG_SUPP_MOVED_MIGR = 0x00000002; const EXCHGID4_FLAG_BIND_PRINC_STATEID = 0x00000100; const EXCHGID4_FLAG_USE_NON_PNFS = 0x00010000; const EXCHGID4_FLAG_USE_PNFS_MDS = 0x00020000; const EXCHGID4_FLAG_USE_PNFS_DS = 0x00040000; const EXCHGID4_FLAG_MASK_PNFS = 0x00070000; const EXCHGID4_FLAG_UPD_CONFIRMED_REC_A = 0x40000000; const EXCHGID4_FLAG_CONFIRMED_R = 0x80000000; struct state_protect_ops4 { bitmap4 spo_must_enforce; bitmap4 spo_must_allow; }; struct ssv_sp_parms4 { state_protect_ops4 ssp_ops; sec_oid4ssp_hash_algs<>;ssp_hash_algs<>; sec_oid4ssp_encr_algs<>;ssp_encr_algs<>; uint32_t ssp_window; uint32_t ssp_num_gss_handles; }; enum state_protect_how4 { SP4_NONE = 0, SP4_MACH_CRED = 1, SP4_SSV = 2 }; union state_protect4_a switch(state_protect_how4 spa_how) { case SP4_NONE: void; case SP4_MACH_CRED: state_protect_ops4 spa_mach_ops; case SP4_SSV: ssv_sp_parms4 spa_ssv_parms; }; struct EXCHANGE_ID4args { client_owner4 eia_clientowner; uint32_t eia_flags; state_protect4_a eia_state_protect; nfs_impl_id4eia_client_impl_id<1>; }; </artwork> </figure> </t>eia_client_impl_id<1>; };]]></sourcecode> </section> <sectiontitle="RESULT"anchor="EXID-res"toc="exclude"> <t> <figure> <artwork>toc="exclude" numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct ssv_prot_info4 { state_protect_ops4 spi_ops; uint32_t spi_hash_alg; uint32_t spi_encr_alg; uint32_t spi_ssv_len; uint32_t spi_window; gsshandle4_tspi_handles<>;spi_handles<>; }; union state_protect4_r switch(state_protect_how4 spr_how) { case SP4_NONE: void; case SP4_MACH_CRED: state_protect_ops4 spr_mach_ops; case SP4_SSV: ssv_prot_info4 spr_ssv_info; }; struct EXCHANGE_ID4resok { clientid4 eir_clientid; sequenceid4 eir_sequenceid; uint32_t eir_flags; state_protect4_r eir_state_protect; server_owner4 eir_server_owner; opaqueeir_server_scope<NFS4_OPAQUE_LIMIT>;eir_server_scope<NFS4_OPAQUE_LIMIT>; nfs_impl_id4eir_server_impl_id<1>;eir_server_impl_id<1>; }; union EXCHANGE_ID4res switch (nfsstat4 eir_status) { case NFS4_OK: EXCHANGE_ID4resok eir_resok4; default: void;}; </artwork> </figure> </t>};]]></sourcecode> </section> <sectiontitle="DESCRIPTION"anchor="OP_EXCHANGE_ID_DESCRIPTION"toc="exclude">toc="exclude" numbered="true"> <name>DESCRIPTION</name> <t> The client uses the EXCHANGE_ID operation to register a particularclient_ownerinstance of that client with theserver.server, as represented by a client_owner4. However, when theclient_ownerclient_owner4 has already been registered by other means(e.g.(e.g., Transparent State Migration), the client may still use EXCHANGE_ID to obtain the client ID assigned previously. </t> <t> The client ID returned from this operation will be associated with the connection on which the EXCHANGE_ID is received and will serve as a parent object for sessions created by the client on this connection or to which the connection is bound. As a result of using those sessions to make requests involving the creation of state, that state will become associated with the client ID returned. </t> <t> In situations in which the registration of the client_owner has not occurred previously, the client ID must first be used, along with the returned eir_sequenceid, in creating an associated session using CREATE_SESSION. </t> <t> If the flag EXCHGID4_FLAG_CONFIRMED_R is set in the result, eir_flags, then it is an indication that the registration of the client_owner has already occurred and that a further CREATE_SESSION is not needed to confirm it. Of course, subsequent CREATE_SESSION operations may be needed for other reasons. </t> <t> The value eir_sequenceid is used to establish an initial sequence valueassociateassociated with the client ID returned. In cases in which a CREATE_SESSION has already been done, there is no need for this value, since sequencing of such request has already beenestablishedestablished, and the client has no need for this value and will ignoreitit. </t> <t> EXCHANGE_IDMAY<bcp14>MAY</bcp14> be sent in a COMPOUND procedure that starts with SEQUENCE. However, when a client communicates with a server for the first time, it will not have a session, so using SEQUENCE will not be possible. If EXCHANGE_ID is sent without a preceding SEQUENCE, then itMUST<bcp14>MUST</bcp14> be the only operation in the COMPOUND procedure's request. If it is not, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOT_ONLY_OP. </t> <t> The eia_clientowner field is composed of a co_verifier field and a co_ownerid string. As noted in <xreftarget="Client_Identifiers"/>,target="Client_Identifiers" format="default"/>, the co_ownerid identifies the client, and the co_verifier specifies a particular incarnation of that client. An EXCHANGE_ID sent with a new incarnation of the client will lead to the server removing lock state of the old incarnation. On the other hand, when an EXCHANGE_ID sent with the current incarnation and co_owneridwill, when itdoes not result in an unrelated error, it will potentially update an existing client ID'sproperties,properties or simply return information about the existing client_id.ThatThe latter would happen when this operation is done to the same server using different network addresses as part of creating trunked connections. </t> <t> A serverMUST NOT<bcp14>MUST NOT</bcp14> provide the same client ID to two different incarnations of an eia_clientowner. </t> <t> In addition to the client ID and sequence ID, the server returns a server owner (eir_server_owner) and server scope (eir_server_scope). The former field is used in connection with network trunking as described in <xref target="Trunking"/>.format="default"/>. The latter field is used to allow clients to determine when client IDs sent by one server may be recognized by another in the event of file system migration (see <xref target="SEC11-EFF-lock"/>format="default"/> of the current document). </t> <t> The client ID returned by EXCHANGE_ID is only unique relative to the combination of eir_server_owner.so_major_id and eir_server_scope. Thus, if two servers return the same client ID, the onus is on the client to distinguish the client IDs on the basis of eir_server_owner.so_major_id and eir_server_scope. In the event two different servers claim matching server_owner.so_major_id and eir_server_scope, the client can use the verification techniques discussed in <xref target="PREP-trunk-verify"/>format="default"/> to determine if the servers are distinct. If they are distinct, then the client will need to note the destination network addresses of the connections used with each server and use the network address as the final discriminator. </t> <t> The server, as defined by the unique identity expressed in the so_major_id of the server owner and the server scope, needs to track several properties of each client ID it hands out. The properties apply to the client ID and all sessions associated with the client ID. The properties are derived from the arguments and results of EXCHANGE_ID. The client ID properties include:<list style="symbols"></t> <ul spacing="normal"> <li> <t> The capabilities expressed by the following bits, which come from the results of EXCHANGE_ID:<list> <t>EXCHGID4_FLAG_SUPP_MOVED_REFER</t> <t>EXCHGID4_FLAG_SUPP_MOVED_MIGR </t> <t>EXCHGID4_FLAG_BIND_PRINC_STATEID </t> <t>EXCHGID4_FLAG_USE_NON_PNFS</t><t>EXCHGID4_FLAG_USE_PNFS_MDS </t> <t>EXCHGID4_FLAG_USE_PNFS_DS </t> </list><ul spacing="normal"> <li>EXCHGID4_FLAG_SUPP_MOVED_REFER</li> <li>EXCHGID4_FLAG_SUPP_MOVED_MIGR </li> <li>EXCHGID4_FLAG_BIND_PRINC_STATEID </li> <li>EXCHGID4_FLAG_USE_NON_PNFS </li> <li>EXCHGID4_FLAG_USE_PNFS_MDS </li> <li>EXCHGID4_FLAG_USE_PNFS_DS </li> </ul> <t> These properties may be updated by subsequent EXCHANGE_ID operations on confirmed client IDs though the serverMAY<bcp14>MAY</bcp14> refuse to change them. </t><t></li> <li> The state protection method used, one of SP4_NONE, SP4_MACH_CRED, or SP4_SSV, as set by the spa_how field of the arguments to EXCHANGE_ID. Once the client ID is confirmed, this property cannot be updated by subsequent EXCHANGE_ID operations.</t></li> <li> <t> For SP4_MACH_CRED or SP4_SSV state protection:<list> <t></t> <ul spacing="normal"> <li> The list of operations (spo_must_enforce) thatMUST<bcp14>MUST</bcp14> use the specified state protection. This list comes from the results of EXCHANGE_ID.</t> <t></li> <li> The list of operations (spo_must_allow) thatMAY<bcp14>MAY</bcp14> use the specified state protection. This list comes from the results of EXCHANGE_ID.</t> </list></li> </ul> <t> Once the client ID is confirmed, these properties cannot be updated by subsequent EXCHANGE_ID requests. </t> </li> <li> <t> For SP4_SSV protection:<list> <t></t> <ul spacing="normal"> <li> The OID of the hash algorithm. This property is represented by one of the algorithms in the ssp_hash_algs field of the EXCHANGE_ID arguments. Once the client ID is confirmed, this property cannot be updated by subsequent EXCHANGE_ID requests.</t> <t></li> <li> The OID of the encryption algorithm. This property is represented by one of the algorithms in the ssp_encr_algs field of the EXCHANGE_ID arguments. Once the client ID is confirmed, this property cannot be updated by subsequent EXCHANGE_ID requests.</t></li> <li> <t> The length of the SSV. This property is represented by the spi_ssv_len field in the EXCHANGE_ID results. Once the client ID is confirmed, this property cannot be updated by subsequent EXCHANGE_ID operations.<vspace blankLines='1' /></t> <t> There areREQUIRED<bcp14>REQUIRED</bcp14> andRECOMMENDED<bcp14>RECOMMENDED</bcp14> relationships among the length of the key of the encryption algorithm ("key length"), the length of the output of hash algorithm ("hash length"), and the length of the SSV ("SSV length").<list style="symbols"> <t></t> <ul spacing="normal"> <li> key lengthMUST<bcp14>MUST</bcp14> be <= hash length. This is because the keys used for the encryption algorithm are actually subkeys derived from the SSV, and the derivation is via the hash algorithm. The selection of an encryption algorithm with a key length that exceeded the length of the output of the hash algorithm would require padding, and thus weaken the use of the encryption algorithm.</t> <t></li> <li> hash lengthSHOULD<bcp14>SHOULD</bcp14> be <= SSV length. This is because the SSV is a key used to derive subkeys via an HMAC, and it is recommended that the key used as input to an HMAC be at least as long as the length of the HMAC's hash algorithm's output (seeSection 3 of<xreftarget="RFC2104"/>). </t> <t>target="RFC2104" sectionFormat="of" section="3"/>). </li> <li> key lengthSHOULD<bcp14>SHOULD</bcp14> be <= SSV length. This is a transitive result of the above two invariants.</t> <t></li> <li> key lengthSHOULD<bcp14>SHOULD</bcp14> be>=>= hash length / 2. This is because the subkey derivation is via an HMAC and it is recommended that if the HMAC has to be truncated, it should not be truncated to less than half the hash length (see Section4<xref target="RFC2104" sectionFormat="bare" section="4"/> of RFC 2104 <xreftarget="RFC2104">RFC2104</xref>). </t> </list> </t> <t>target="RFC2104" format="default"/>). </li> </ul> </li> <li> Number of concurrent versions of the SSV the client and server will support (see <xreftarget="ssv_mech"/>).target="ssv_mech" format="default"/>). This property is represented by spi_window in the EXCHANGE_ID results. The property may be updated by subsequent EXCHANGE_ID operations.</t> </list> </t> <t></li> </ul> </li> <li> The client's implementation ID as represented by the eia_client_impl_id field of the arguments. The property may be updated by subsequent EXCHANGE_ID requests.</t> <t></li> <li> The server's implementation ID as represented by the eir_server_impl_id field of the reply. The property may be updated by replies to subsequent EXCHANGE_ID requests.</t> </list> </t></li> </ul> <t> The eia_flags passed as part of the arguments and the eir_flags results allow the client and server to inform each other of their capabilities as well as indicate how the client ID will be used. Whether a bit is set or cleared on the arguments' flags does not force the server to set or clear the same bit on the results' side. Bits not defined above cannot be set in the eia_flags field. If they are, the serverMUST<bcp14>MUST</bcp14> reject the operation with NFS4ERR_INVAL. </t> <t> The EXCHGID4_FLAG_UPD_CONFIRMED_REC_A bit can only be set in eia_flags; it is always off in eir_flags. The EXCHGID4_FLAG_CONFIRMED_R bit can only be set in eir_flags; it is always off in eia_flags. If the server recognizes the co_ownerid and co_verifier as mapping to a confirmed client ID, it sets EXCHGID4_FLAG_CONFIRMED_R in eir_flags. The EXCHGID4_FLAG_CONFIRMED_R flag allows a client to tell if the client ID it is trying to create already exists and is confirmed. </t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is set in eia_flags, this means that the client is attempting to update properties of an existing confirmed client ID (if the client wants to update properties of an unconfirmed client ID, itMUST NOT<bcp14>MUST NOT</bcp14> set EXCHGID4_FLAG_UPD_CONFIRMED_REC_A). If so, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the client send the update EXCHANGE_ID operation in the same COMPOUND as a SEQUENCE so that the EXCHANGE_ID is executed exactly once. Whether the client can update the properties of client ID depends on the state protection it selected when the client ID was created, and the principal and security flavor it used when sending the EXCHANGE_ID operation. The situations described in items <xref target="case_update" format="counter"/>, <xref target="case_update_noent" format="counter"/>, <xref target="case_update_exist" format="counter"/>, or <xref target="case_update_perm" format="counter"/> of the second numbered list of <xref target="OP_EXCHANGE_ID_IMPLEMENTATION"/>format="default"/> below will apply. Note that if the operation succeeds and returns a client ID that is already confirmed, the serverMUST<bcp14>MUST</bcp14> set the EXCHGID4_FLAG_CONFIRMED_R bit in eir_flags. </t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is not set in eia_flags, this means that the client is trying to establish a new client ID; it is attempting to trunk data communication to the server (See <xreftarget="Trunking"/>);target="Trunking" format="default"/>); or it is attempting to update properties of an unconfirmed client ID. The situations described in items <xref target="case_new_owner_id" format="counter"/>, <xref target="case_non_update" format="counter"/>, <xref target="case_client_collision" format="counter"/>, <xref target="case_retry" format="counter"/>, or <xref target="case_client_restart" format="counter"/> of the second numbered list of <xref target="OP_EXCHANGE_ID_IMPLEMENTATION"/>format="default"/> below will apply. Note that if the operation succeeds and returns a client ID that was previously confirmed, the serverMUST<bcp14>MUST</bcp14> set the EXCHGID4_FLAG_CONFIRMED_R bit in eir_flags. </t> <t> When the EXCHGID4_FLAG_SUPP_MOVED_REFER flag bit is set, the client indicates that it is capable of dealing with an NFS4ERR_MOVED error as part of a referral sequence. When this bit is not set, it is still legal for the server to perform a referral sequence. However, a server may use the fact that the client is incapable of correctly responding to a referral, by avoiding it for that particular client. It may, for instance, act as a proxy for that particular file system, at some cost in performance, although it is not obligated to do so. If the server will potentially perform a referral, itMUST<bcp14>MUST</bcp14> set EXCHGID4_FLAG_SUPP_MOVED_REFER in eir_flags. </t> <t> When the EXCHGID4_FLAG_SUPP_MOVED_MIGR is set, the client indicates that it is capable of dealing with an NFS4ERR_MOVED error as part of a file system migration sequence. When this bit is not set, it is still legal for the server to indicate that a file system has moved, when this in fact happens. However, a server may use the fact that the client is incapable of correctly responding to a migration in its scheduling of file systems to migrate so as to avoid migration of file systems being actively used. It may also hide actual migrations from clients unable to deal with them by acting as a proxy for a migrated file system for particular clients, at some cost in performance, although it is not obligated to do so. If the server will potentially perform a migration, itMUST<bcp14>MUST</bcp14> set EXCHGID4_FLAG_SUPP_MOVED_MIGR in eir_flags. </t> <t> When EXCHGID4_FLAG_BIND_PRINC_STATEID is set, the client indicates that it wants the server to bind the stateid to the principal. This means that when a principal creates a stateid, it has to be the one to use the stateid. If the server will perform binding, it will return EXCHGID4_FLAG_BIND_PRINC_STATEID. The serverMAY<bcp14>MAY</bcp14> return EXCHGID4_FLAG_BIND_PRINC_STATEID even if the client does not request it. If an update to the client ID changes the value of EXCHGID4_FLAG_BIND_PRINC_STATEID's client ID property, the effect applies only to new stateids. Existing stateids (and all stateids with the same "other" field) that were created with stateid to principal binding in force will continue to have binding in force. Existing stateids (and all stateids with the same "other" field) that were created with stateid to principal not in force will continue to have binding not in force. </t> <t> The EXCHGID4_FLAG_USE_NON_PNFS, EXCHGID4_FLAG_USE_PNFS_MDS, and EXCHGID4_FLAG_USE_PNFS_DS bits are described in <xreftarget="Client_ID_and_Session_Association"/>target="pnfs_session_stuff"/> and convey roles the client ID is to be used for in a pNFS environment. The serverMUST<bcp14>MUST</bcp14> set one of the acceptable combinations of these bits (roles) in eir_flags, as specified in that section. Note that the same client owner/server owner pair can have multiple roles. Multiple roles can be associated with the same client ID or with different client IDs. Thus, if a client sends EXCHANGE_ID from the same client owner to the same server owner multiple times, but specifies different pNFS roles each time, the server might return different client IDs. Given that different pNFS roles might have different client IDs, the client may ask for different properties for each role/client ID. </t> <t> The spa_how field of the eia_state_protect field specifies how the client wants to protect its client, locking, and session states from unauthorized changes (<xreftarget="protect_state_change"/>): <list style="symbols"> <t>target="protect_state_change" format="default"/>): </t> <ul spacing="normal"> <li> SP4_NONE. The client does not request the NFSv4.1 server to enforce state protection. The NFSv4.1 serverMUST NOT<bcp14>MUST NOT</bcp14> enforce state protection for the returned client ID.</t></li> <li> <t> SP4_MACH_CRED. If spa_how is SP4_MACH_CRED, then the clientMUST<bcp14>MUST</bcp14> send the EXCHANGE_ID operation with RPCSEC_GSS as the security flavor, and with a service of RPC_GSS_SVC_INTEGRITY or RPC_GSS_SVC_PRIVACY. If SP4_MACH_CRED is specified, then the client wants to use an RPCSEC_GSS-based machine credential to protect its state. The serverMUST<bcp14>MUST</bcp14> note the principal the EXCHANGE_ID operation was sent with, and the GSS mechanism used. These notes collectively comprise the machine credential.<vspace blankLines='1' /></t> <t> After the client ID is confirmed, as long as the lease associated with the client ID is unexpired, a subsequent EXCHANGE_ID operation that uses the same eia_clientowner.co_owner as the first EXCHANGE_IDMUST<bcp14>MUST</bcp14> also use the same machine credential as the first EXCHANGE_ID. The server returns the same client ID for the subsequent EXCHANGE_ID as that returned from the first EXCHANGE_ID. </t><t></li> <li> SP4_SSV. If spa_how is SP4_SSV, then the clientMUST<bcp14>MUST</bcp14> send the EXCHANGE_ID operation with RPCSEC_GSS as the security flavor, and with a service of RPC_GSS_SVC_INTEGRITY or RPC_GSS_SVC_PRIVACY. If SP4_SSV is specified, then the client wants to use the SSV to protect its state. The server records the credential used in the request as the machine credential (as defined above) for the eia_clientowner.co_owner. The CREATE_SESSION operation that confirms the client IDMUST<bcp14>MUST</bcp14> use the same machine credential.</t> </list> </t></li> </ul> <t> When a client specifies SP4_MACH_CRED or SP4_SSV, it also provides two lists of operations (each expressed as a bitmap). The first list is spo_must_enforce and consists of those operations the clientMUST<bcp14>MUST</bcp14> send (subject to the server confirming the list of operations in the result of EXCHANGE_ID) with the machine credential (if SP4_MACH_CRED protection is specified) or the SSV-based credential (if SP4_SSV protection is used). The clientMUST<bcp14>MUST</bcp14> send the operations with RPCSEC_GSS credentials that specify the RPC_GSS_SVC_INTEGRITY or RPC_GSS_SVC_PRIVACY security service. Typically, the first list of operations includes EXCHANGE_ID, CREATE_SESSION, DELEGPURGE, DESTROY_SESSION, BIND_CONN_TO_SESSION, and DESTROY_CLIENTID. The clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> specify in this list any operations that require a filehandle because the server's access policiesMAY<bcp14>MAY</bcp14> conflict with the client's choice, and thus the client would then be unable to access a subset of the server's namespace. </t> <t> Note that if SP4_SSV protection is specified, and the client indicates that CREATE_SESSION must be protected with SP4_SSV, because the SSV cannot exist without a confirmed client ID, the first CREATE_SESSIONMUST<bcp14>MUST</bcp14> instead be sent using the machine credential, and the serverMUST<bcp14>MUST</bcp14> accept the machine credential. </t> <t> There is a corresponding result, also called spo_must_enforce, of the operations for which the server will require SP4_MACH_CRED or SP4_SSV protection. Normally, the server's result equals the client's argument, but the resultMAY<bcp14>MAY</bcp14> be different. If the client requests one or more operations in the set { EXCHANGE_ID, CREATE_SESSION, DELEGPURGE, DESTROY_SESSION, BIND_CONN_TO_SESSION, DESTROY_CLIENTID }, then the result spo_must_enforceMUST<bcp14>MUST</bcp14> include the operations the client requested from that set. </t> <t> If spo_must_enforce in the results has BIND_CONN_TO_SESSION set, then connection binding enforcement is enabled, and the clientMUST<bcp14>MUST</bcp14> use the machine (if SP4_MACH_CRED protection is used) or SSV (if SP4_SSV protection is used) credential on calls to BIND_CONN_TO_SESSION. </t> <t> The second list is spo_must_allow and consists of those operations the client wants to have the option of sending with the machine credential or the SSV-based credential, even if the object the operations are performed on is not owned by the machine or SSV credential. </t> <t> The corresponding result, also called spo_must_allow, consists of the operations the server will allow the client to use SP4_SSV or SP4_MACH_CRED credentials with. Normally, the server's result equals the client's argument, but the resultMAY<bcp14>MAY</bcp14> be different. </t> <t> The purpose of spo_must_allow is to allow clients to solve the following conundrum. Suppose the client ID is confirmed with EXCHGID4_FLAG_BIND_PRINC_STATEID, and it calls OPEN with the RPCSEC_GSS credentials of a normal user. Now suppose the user's credentials expire, and cannot be renewed (e.g., a Kerberos ticket granting ticket expires, and the user has logged off and will not be acquiring a new ticket granting ticket). The client will be unable to send CLOSE without the user's credentials, which is to say the client has to either leave the state on the server or re-send EXCHANGE_ID with a new verifier to clear all state, that is, unless the client includes CLOSE on the list of operations in spo_must_allow and the server agrees. </t> <t> The SP4_SSV protection parameters also have:<list style="hanging"> <t hangText="ssp_hash_algs:" /> <t></t> <dl newline="true" spacing="normal"> <dt>ssp_hash_algs:</dt> <dd><t> This is the set of algorithms the client supports for the purpose of computing the digests needed for the internal SSV GSS mechanism and for the SET_SSV operation. Each algorithm is specified as an object identifier (OID). TheREQUIRED<bcp14>REQUIRED</bcp14> algorithms for a server are id-sha1, id-sha224, id-sha256, id-sha384, and id-sha512 <xreftarget="RFC4055"/>. </t>target="RFC4055" format="default"/>.</t> <t> Due to known weaknesses in id-sha1, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the client specify at least one algorithm within ssp_hash_algs other thanid-sha1. </t>id-sha1.</t> <t> The algorithm the server selects among the set is indicated in spi_hash_alg, a field of spr_ssv_prot_info. The field spi_hash_alg is an index into the array ssp_hash_algs. Because of known the weaknesses in id-sha1, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that it not be selected by the server as long as ssp_hash_algs contains any other supportedalgorithm. </t>algorithm.</t> <t> If the server does not support any of the offered algorithms, it returns NFS4ERR_HASH_ALG_UNSUPP. If ssp_hash_algs is empty, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t><t hangText="ssp_encr_algs:" /> <t></dd> <dt>ssp_encr_algs:</dt> <dd> This is the set of algorithms the client supports for the purpose of providing privacy protection for the internal SSV GSS mechanism. Each algorithm is specified as an OID. TheREQUIRED<bcp14>REQUIRED</bcp14> algorithm for a server is id-aes256-CBC. TheRECOMMENDED<bcp14>RECOMMENDED</bcp14> algorithms are id-aes192-CBC and id-aes128-CBC <xref target="CSOR_AES"/>.format="default"/>. The selected algorithm is returned in spi_encr_alg, an index into ssp_encr_algs. If the server does not support any of the offered algorithms, it returns NFS4ERR_ENCR_ALG_UNSUPP. If ssp_encr_algs is empty, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. Note that due to previously stated requirements and recommendations on the relationships between key length and hash length, some combinations ofRECOMMENDED<bcp14>RECOMMENDED</bcp14> andREQUIRED<bcp14>REQUIRED</bcp14> encryption algorithm and hash algorithm eitherSHOULD NOT<bcp14>SHOULD NOT</bcp14> orMUST NOT<bcp14>MUST NOT</bcp14> be used. <xreftarget="algtbl"/>target="algtbl" format="default"/> summarizes the illegal and discouraged combinations.</t> <t hangText="ssp_window:" /> <t></dd> <dt>ssp_window:</dt> <dd> This is the number of SSV versions the client wants the server to maintain (i.e., each successful call to SET_SSV produces a new version of the SSV). If ssp_window is zero, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. The server responds with spi_window, whichMUST NOT<bcp14>MUST NOT</bcp14> exceed ssp_window andMUST<bcp14>MUST</bcp14> be at least one. Any requests on the backchannel or fore channel that are using a version of the SSV that is outside the window will fail with an ONC RPC authentication error, and the requester will have to retry them with the same slot ID and sequence ID.</t> <t hangText="ssp_num_gss_handles:" /></dd> <dt>ssp_num_gss_handles:</dt> <dd> <t> This is the number of RPCSEC_GSS handles the server should create that are based on the GSS SSV mechanism (see <xref target="ssv_mech"/>).format="default"/>). It is not the total number of RPCSEC_GSS handles for the client ID. Indeed, subsequent calls to EXCHANGE_ID will add RPCSEC_GSS handles. The server responds with a list of handles in spi_handles. If the client asks for at least one handle and the server cannot create it, the serverMUST<bcp14>MUST</bcp14> return an error. The handles in spi_handles are not available for use until the client ID is confirmed, which could be immediately if EXCHANGE_ID returns EXCHGID4_FLAG_CONFIRMED_R, or upon successful confirmation from CREATE_SESSION.<vspace blankLines='1' /></t> <t> While a client ID can span all the connections that are connected to a server sharing the same eir_server_owner.so_major_id, the RPCSEC_GSS handles returned in spi_handles can only be used on connections connected to a server that returns the same the eir_server_owner.so_major_id and eir_server_owner.so_minor_id on each connection. It is permissible for the client to set ssp_num_gss_handles to zero; the client can create more handles with another EXCHANGE_ID call.<vspace blankLines='1' /></t> <t> Because each SSV RPCSEC_GSS handle shares a common SSV GSS context, there are security considerations specific to this situation discussed in <xreftarget="rpcsec_ssv_consider"/>. <vspace blankLines='1' />target="rpcsec_ssv_consider" format="default"/>. </t> <t> The seq_window (see Section5.2.3.1<xref target="RFC2203" sectionFormat="bare" section="5.2.3.1"/> ofRFC2203RFC 2203 <xreftarget="RFC2203"/>)target="RFC2203" format="default"/>) of each RPCSEC_GSS handle in spi_handleMUST<bcp14>MUST</bcp14> be the same as the seq_window of the RPCSEC_GSS handle used for the credential of the RPC requestthatof which the EXCHANGE_ID operation was sent as apart of.part. </t></list> </t> <texttable anchor='algtbl'> <ttcol align='left'>Encryption Algorithm</ttcol> <ttcol align='left'>MUST NOT</dd> </dl> <table anchor="algtbl" align="center"> <thead> <tr> <th align="left">Encryption Algorithm</th> <th align="left"><bcp14>MUST NOT</bcp14> be combinedwith</ttcol> <ttcol align='left'>SHOULD NOTwith</th> <th align="left"><bcp14>SHOULD NOT</bcp14> be combinedwith</ttcol> <c>id-aes128-CBC</c> <c></c> <c>id-sha384, id-sha512</c> <c>id-aes192-CBC</c> <c>id-sha1</c> <c>id-sha512</c> <c>id-aes256-CBC</c> <c>id-sha1, id-sha224</c> <c></c> </texttable>with</th> </tr> </thead> <tbody> <tr> <td align="left">id-aes128-CBC</td> <td align="left"/> <td align="left">id-sha384, id-sha512</td> </tr> <tr> <td align="left">id-aes192-CBC</td> <td align="left">id-sha1</td> <td align="left">id-sha512</td> </tr> <tr> <td align="left">id-aes256-CBC</td> <td align="left">id-sha1, id-sha224</td> <td align="left"/> </tr> </tbody> </table> <t> The arguments include an array of up to one element in length called eia_client_impl_id. If eia_client_impl_id is present, it contains the information identifying the implementation of the client. Similarly, the results include an array of up to one element in length called eir_server_impl_id that identifies the implementation of the server. ServersMUST<bcp14>MUST</bcp14> accept a zero-length eia_client_impl_id array, and clientsMUST<bcp14>MUST</bcp14> accept a zero-length eir_server_impl_id array. </t> <t> A possible use for implementation identifiers would be in diagnostic software that extracts this information in an attempt to identify interoperability problems, performance workload behaviors, or general usage statistics. Since the intent of having access to this information is for planning or general diagnosis only, the client and serverMUST NOT<bcp14>MUST NOT</bcp14> interpret this implementation identity information in a way that affects how the implementation interacts with its peer. The client and server are not allowed to depend on the peer's manifesting a particular allowed behavior based on an implementation identifier but are required to interoperate as specified elsewhere in the protocol specification. </t> <t> Because it is possible that some implementations might violate the protocol specification and interpret the identity information, implementationsMUST<bcp14>MUST</bcp14> provide facilities to allow the NFSv4 client and server to be configured to set the contents of the nfs_impl_id structures sent to any specified value. </t> </section> <sectiontitle="IMPLEMENTATION"anchor="OP_EXCHANGE_ID_IMPLEMENTATION"toc="exclude">toc="exclude" numbered="true"> <name>IMPLEMENTATION</name> <t> A server's client record is a 5-tuple: </t> <ol spacing="normal" type="1"> <li> <t>co_ownerid: </t> <t><list style="numbers"> <t>co_ownerid <list style="empty"> <t>TheThe client identifier string, from the eia_clientowner structure of the EXCHANGE_ID4args structure.</t></list></t></li> <li> <t>co_verifier:<list style="empty"></t> <t>A client-specific value used to indicate incarnations (where a client restart represents a new incarnation), from the eia_clientowner structure of the EXCHANGE_ID4args structure.</t></list></t></li> <li> <t>principal:<list style="empty"></t> <t> The principal that was defined in the RPC header's credential and/or verifier at the time the client record was established. </t></list></t></li> <li> <t>client ID:<list style="empty"></t> <t>The shorthand client identifier, generated by the server and returned via the eir_clientid field in the EXCHANGE_ID4resok structure.</t></list></t></li> <li> <t>confirmed:<list style="empty"></t> <t>A private field on the server indicating whether or not a client record has been confirmed. A client record is confirmed if there has been a successful CREATE_SESSION operation to confirm it. Otherwise, it is unconfirmed. An unconfirmed record is established by an EXCHANGE_ID call. Any unconfirmed record that is not confirmed within a lease periodSHOULD<bcp14>SHOULD</bcp14> be removed.</t></list></t> </list> </t> <!-- start new list --></li> </ol> <t> The following identifiers represent special values for the fields in the records.<list style="hanging"> <t hangText="ownerid_arg:"/> <t></t> <dl newline="true" spacing="normal"> <dt>ownerid_arg:</dt> <dd> The value of the eia_clientowner.co_ownerid subfield of the EXCHANGE_ID4args structure of the current request.</t> <t hangText="verifier_arg:"/> <t></dd> <dt>verifier_arg:</dt> <dd> The value of the eia_clientowner.co_verifier subfield of the EXCHANGE_ID4args structure of the current request.</t> <t hangText="old_verifier_arg:"/> <t></dd> <dt>old_verifier_arg:</dt> <dd> A value of the eia_clientowner.co_verifier field of a client record received in a previous request; this is distinct from verifier_arg.</t> <t hangText="principal_arg:"/> <t></dd> <dt>principal_arg:</dt> <dd> The value of the RPCSEC_GSS principal for the current request.</t> <t hangText="old_principal_arg:"/> <t></dd> <dt>old_principal_arg:</dt> <dd> A value of the principal of a client record as defined by the RPC header's credential or verifier of a previous request. This is distinct from principal_arg.</t> <t hangText="clientid_ret:"/> <t></dd> <dt>clientid_ret:</dt> <dd> The value of the eir_clientid field the server will return in the EXCHANGE_ID4resok structure for the current request.</t> <t hangText="old_clientid_ret:"/> <t></dd> <dt>old_clientid_ret:</dt> <dd> The value of the eir_clientid field the server returned in the EXCHANGE_ID4resok structure for a previous request. This is distinct from clientid_ret.</t> <t hangText="confirmed:"/> <t></dd> <dt>confirmed:</dt> <dd> The client ID has been confirmed.</t> <t hangText="unconfirmed:"/> <t></dd> <dt>unconfirmed:</dt> <dd> The client ID has not been confirmed.</t> </list> </t></dd> </dl> <t> Since EXCHANGE_ID is a non-idempotent operation, we must consider the possibility that retries occur as a result of a client restart, network partition, malfunctioning router, etc. Retries are identified by the value of the eia_clientowner field of EXCHANGE_ID4args, and the method for dealing with them is outlined in the scenarios below. </t> <t> The scenarios are described in terms of the client record(s) a server has for a given co_ownerid. Note that if the client ID was created specifying SP4_SSV state protection and EXCHANGE_ID as the one of the operations in spo_must_allow, then the serverMUST<bcp14>MUST</bcp14> authorize EXCHANGE_IDs with the SSV principal in addition to the principal that created the client ID. </t><t anchor="case_list"> <list style="numbers"> <t anchor="case_new_owner_id">New<ol spacing="normal" type="1"> <li anchor="case_new_owner_id"> <t>New Owner ID<list style="empty"></t> <t> If the server has no client records with eia_clientowner.co_ownerid matching ownerid_arg, and EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is not set in the EXCHANGE_ID, then a new shorthand client ID (let us call it clientid_ret) is generated, and the following unconfirmed record is added to the server's state.<vspace blankLines='1' /></t> <t> { ownerid_arg, verifier_arg, principal_arg, clientid_ret, unconfirmed }<vspace blankLines='1' /></t> <t> Subsequently, the server returns clientid_ret.<vspace blankLines='1' /> </t> </list> <vspace blankLines='1' /></t><t anchor="case_non_update">Non-Update</li> <li anchor="case_non_update"> <t>Non-Update on Existing ClientID <list style="empty">ID</t> <t> If the server has the following confirmed record, and the request does not have EXCHGID4_FLAG_UPD_CONFIRMED_REC_A set, then the request is the result of a retried request due to a faulty router or lost connection, or the client is trying to determine if it can perform trunking.<vspace blankLines='1' /></t> <t> { ownerid_arg, verifier_arg, principal_arg, clientid_ret, confirmed }<vspace blankLines='1' /></t> <t> Since the record has been confirmed, the client must have received the server's reply from the initial EXCHANGE_ID request. Since the server has a confirmed record, and since EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is not set, with the possible exception of eir_server_owner.so_minor_id, the server returns the same result it did when the client ID's properties were last updated (or if never updated, the result when the client ID was created). The confirmed record is unchanged. </t></list> </t> <t anchor="case_client_collision">Client</li> <li anchor="case_client_collision"> <t>Client Collision<list style="empty"></t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is not set, and if the server has the following confirmed record, then this request is likely the result of a chance collision between the values of the eia_clientowner.co_ownerid subfield of EXCHANGE_ID4args for two different clients. </t> <t> { ownerid_arg, *, old_principal_arg, old_clientid_ret, confirmed } </t> <t> If there is currently no state associated with old_clientid_ret, or if there is state but the lease has expired, then this case is effectively equivalent to the New Owner ID case of <xreftarget="case_new_owner_id"/>.target="case_new_owner_id" format="default"/>. The confirmed record is deleted, the old_clientid_ret and its lock state are deleted, a new shorthand client ID is generated, and the following unconfirmed record is added to the server's state.<vspace blankLines='1' /></t> <t> { ownerid_arg, verifier_arg, principal_arg, clientid_ret, unconfirmed }<vspace blankLines='1' /></t> <t> Subsequently, the server returns clientid_ret.<vspace blankLines='1' /></t> <t> If old_clientid_ret has an unexpired lease with state, then no state of old_clientid_ret is changed or deleted. The server returns NFS4ERR_CLID_INUSE to indicate that the client should retry with a different value for the eia_clientowner.co_ownerid subfield of EXCHANGE_ID4args. The client record is notchanged. </t> </list> </t> <t anchor="case_retry">Replacementchanged.</t> </li> <li anchor="case_retry"> <t>Replacement of Unconfirmed Record<list style="empty"></t> <t> If the EXCHGID4_FLAG_UPD_CONFIRMED_REC_A flag is not set, and the server has the following unconfirmed record, then the client is attempting EXCHANGE_ID again on an unconfirmed client ID, perhaps due to a retry, a client restart before client ID confirmation (i.e., before CREATE_SESSION was called), or some other reason.<vspace blankLines='1' /></t> <t> { ownerid_arg, *, *, old_clientid_ret, unconfirmed }<vspace blankLines='1' /></t> <t> It is possible that the properties of old_clientid_ret are different than those specified in the current EXCHANGE_ID. Whether or not the properties are being updated, to eliminate ambiguity, the server deletes the unconfirmed record, generates a new client ID (clientid_ret), and establishes the following unconfirmed record:<vspace blankLines='1' /></t> <t> { ownerid_arg, verifier_arg, principal_arg, clientid_ret, unconfirmed }<vspace blankLines='1' /> </t> </list></t><t anchor="case_client_restart">Client Restart <list style="empty"></li> <li anchor="case_client_restart"> <t>Client Restart</t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is not set, and if the server has the following confirmed client record, then this request is likely from a previously confirmed client that has restarted. </t> <t> { ownerid_arg, old_verifier_arg, principal_arg, old_clientid_ret, confirmed } </t> <t> Since the previous incarnation of the same client will no longer be making requests, once the new client ID is confirmed by CREATE_SESSION, byte-range locks and share reservations should be released immediately rather than forcing the new incarnation to wait for the lease time on the previous incarnation to expire. Furthermore, session state should be removed since if the client had maintained that information across restart, this request would not have been sent. If the server supports neither the CLAIM_DELEGATE_PREV nor CLAIM_DELEG_PREV_FH claim types, associated delegations should be purged as well; otherwise, delegations are retained and recovery proceeds according to <xreftarget="delegation_recovery"/>.target="delegation_recovery" format="default"/>. </t> <t> After processing, clientid_ret is returned to the client and this client record is added: </t> <t> { ownerid_arg, verifier_arg, principal_arg, clientid_ret, unconfirmed }<vspace blankLines='1' /></t> <t> The previously described confirmed record continues to exist, and thus the same ownerid_arg exists in both a confirmed and unconfirmed state at the same time. The number of states can collapse to one once the server receives an applicable CREATE_SESSION or EXCHANGE_ID.<list style='symbols'> <t></t> <ul spacing="normal"> <li> If the server subsequently receives a successful CREATE_SESSION that confirms clientid_ret, then the server atomically destroys the confirmed record and makes the unconfirmed record confirmed as described in <xref target="OP_CREATE_SESSION_DESCRIPTION"/>. </t> <t>format="default"/>. </li> <li> If the server instead subsequently receives an EXCHANGE_ID with the client owner equal to ownerid_arg, one strategy is to simply delete the unconfirmed record, and process the EXCHANGE_ID as described in the entirety of <xref target="OP_EXCHANGE_ID_IMPLEMENTATION"/>. </t> </list> </t> </list>format="default"/>. </li> </ul> </li> <li anchor="case_update"> <t>Update </t><t anchor="case_update">Update <list style="empty"><t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is set, and the server has the following confirmed record, then this request is an attempt at an update.<vspace blankLines='1' /></t> <t> { ownerid_arg, verifier_arg, principal_arg, clientid_ret, confirmed }<vspace blankLines='1' /></t> <t> Since the record has been confirmed, the client must have received the server's reply from the initial EXCHANGE_ID request. The server allows the update, and the client record is left intact. </t></list> </t> <t anchor="case_update_noent">Update</li> <li anchor="case_update_noent"> <t>Update but No Confirmed Record<list style="empty"></t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is set, and the server has no confirmed record corresponding ownerid_arg, then the server returns NFS4ERR_NOENT and leaves any unconfirmed record intact. </t></list> </t> <t anchor="case_update_exist">Update</li> <li anchor="case_update_exist"> <t>Update but Wrong Verifier<list style="empty"></t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is set, and the server has the following confirmed record, then this request is an illegal attempt at an update, perhaps because of a retry from a previous client incarnation.<vspace blankLines='1' /></t> <t> { ownerid_arg, old_verifier_arg, *, clientid_ret, confirmed }<vspace blankLines='1' /></t> <t> The server returns NFS4ERR_NOT_SAME and leaves the client record intact. </t></list> </t> <t anchor="case_update_perm">Update</li> <li anchor="case_update_perm"> <t>Update but Wrong Principal<list style="empty"></t> <t> If EXCHGID4_FLAG_UPD_CONFIRMED_REC_A is set, and the server has the following confirmed record, then this request is an illegal attempt at an update by an unauthorized principal.<vspace blankLines='1' /></t> <t> { ownerid_arg, verifier_arg, old_principal_arg, clientid_ret, confirmed }<vspace blankLines='1' /></t> <t> The server returns NFS4ERR_PERM and leaves the client record intact. </t></list> </t> </list> </t></li> </ol> </section> </section><!-- Copyright (C) The Internet Society (2006) --> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CREATE_SESSION"title="Operationnumbered="true" toc="default"> <name>Operation 43: CREATE_SESSION - Create New Session and Confirm ClientID" >ID</name> <section toc="exclude" anchor="OP_CREATE_SESSION_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct channel_attrs4 { count4 ca_headerpadsize; count4 ca_maxrequestsize; count4 ca_maxresponsesize; count4 ca_maxresponsesize_cached; count4 ca_maxoperations; count4 ca_maxrequests; uint32_tca_rdma_ird<1>;ca_rdma_ird<1>; }; const CREATE_SESSION4_FLAG_PERSIST = 0x00000001; const CREATE_SESSION4_FLAG_CONN_BACK_CHAN = 0x00000002; const CREATE_SESSION4_FLAG_CONN_RDMA = 0x00000004; struct CREATE_SESSION4args { clientid4 csa_clientid; sequenceid4 csa_sequence; uint32_t csa_flags; channel_attrs4 csa_fore_chan_attrs; channel_attrs4 csa_back_chan_attrs; uint32_t csa_cb_program; callback_sec_parms4csa_sec_parms<>; }; </artwork> </figure>csa_sec_parms<>; };]]></sourcecode> </section> <section toc="exclude" anchor="OP_CREATE_SESSION_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CREATE_SESSION4resok { sessionid4 csr_sessionid; sequenceid4 csr_sequence; uint32_t csr_flags; channel_attrs4 csr_fore_chan_attrs; channel_attrs4 csr_back_chan_attrs; }; union CREATE_SESSION4res switch (nfsstat4 csr_status) { case NFS4_OK: CREATE_SESSION4resok csr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_CREATE_SESSION_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is used by the client to create new session objects on the server. </t> <t> CREATE_SESSION can be sent with or without a preceding SEQUENCE operation in the same COMPOUND procedure. If CREATE_SESSION is sent with a preceding SEQUENCE operation, any session created by CREATE_SESSION has no direct relation to the session specified in the SEQUENCE operation, although the two sessions might be associated with the same client ID. If CREATE_SESSION is sent without a preceding SEQUENCE, then itMUST<bcp14>MUST</bcp14> be the only operation in the COMPOUND procedure's request. If it is not, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOT_ONLY_OP. </t> <t> In addition to creating a session, CREATE_SESSION has the following effects:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The first session created with a new client ID serves to confirm the creation of that client's state on the server. The server returns the parameter values for the new session.</t> <t></li> <li> The connection CREATE_SESSION that is sent over is associated with the session's fore channel.</t> </list> </t></li> </ul> <t> The arguments and results of CREATE_SESSION are described as follows:<list style="hanging"> <t hangText="csa_clientid:"/> <t></t> <dl newline="false" spacing="normal"> <dt>csa_clientid:</dt> <dd> This is the client ID with which the new session will be associated. The corresponding result is csr_sessionid, the session ID of the new session.</t> <t hangText="csa_sequence:"/> <t></dd> <dt>csa_sequence:</dt> <dd> Each client ID serializes CREATE_SESSION via a per-client ID sequence number (see <xref target="OP_CREATE_SESSION_IMPLEMENTATION"/>).format="default"/>). The corresponding result is csr_sequence, whichMUST<bcp14>MUST</bcp14> be equal to csa_sequence.</t> </list> </t></dd> </dl> <t> In the next three arguments, the client offers a value that is to be a property of the session. Except where stated otherwise, it isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the server accept the value. If it is not acceptable, the serverMAY<bcp14>MAY</bcp14> use a different value. Regardless, the serverMUST<bcp14>MUST</bcp14> return the value the session will use (which will be either what the client offered, or what the server is insisting on) to the client.<list style="hanging"> <t hangText="csa_flags:"/></t> <dl newline="false" spacing="normal"> <dt>csa_flags:</dt> <dd> <t> The csa_flags field contains a list of the following flag bits:<list style="hanging"> <t hangText="CREATE_SESSION4_FLAG_PERSIST:"/></t> <dl newline="true" spacing="normal"> <dt>CREATE_SESSION4_FLAG_PERSIST:</dt> <dd> <t> If CREATE_SESSION4_FLAG_PERSIST is set, the client wants the server to provide a persistent reply cache. For sessions in which only idempotent operations will be used (e.g., a read-only session), clientsSHOULD NOT<bcp14>SHOULD NOT</bcp14> set CREATE_SESSION4_FLAG_PERSIST. If the server does not or cannot provide a persistent reply cache, the serverMUST NOT<bcp14>MUST NOT</bcp14> set CREATE_SESSION4_FLAG_PERSIST in the field csr_flags.<vspace blankLines='1' /></t> <t> If the server is a pNFS metadata server, for reasons described in <xref target="obtaining_layout"/>format="default"/> itSHOULD<bcp14>SHOULD</bcp14> support CREATE_SESSION4_FLAG_PERSIST if it supports the layout_hint (<xref target="attrdef_layout_hint"/>)format="default"/>) attribute. </t><t hangText="CREATE_SESSION4_FLAG_CONN_BACK_CHAN:"/> <t></dd> <dt>CREATE_SESSION4_FLAG_CONN_BACK_CHAN:</dt> <dd> If CREATE_SESSION4_FLAG_CONN_BACK_CHAN is set in csa_flags, the client is requesting that the connection over which the CREATE_SESSION operation arrived be associated with the session's backchannel in addition to its fore channel. If the server agrees, it sets CREATE_SESSION4_FLAG_CONN_BACK_CHAN in the result field csr_flags. If CREATE_SESSION4_FLAG_CONN_BACK_CHAN is not set in csa_flags, then CREATE_SESSION4_FLAG_CONN_BACK_CHANMUST NOT<bcp14>MUST NOT</bcp14> be set in csr_flags.</t> <t hangText="CREATE_SESSION4_FLAG_CONN_RDMA:"/> <t></dd> <dt>CREATE_SESSION4_FLAG_CONN_RDMA:</dt> <dd> If CREATE_SESSION4_FLAG_CONN_RDMA is set in csa_flags, and if the connection over which the CREATE_SESSION operation arrived is currently in non-RDMA mode but has the capability to operate in RDMA mode, then the client is requesting that the server "step up" to RDMA mode on the connection. If the server agrees, it sets CREATE_SESSION4_FLAG_CONN_RDMA in the result field csr_flags. If CREATE_SESSION4_FLAG_CONN_RDMA is not set in csa_flags, then CREATE_SESSION4_FLAG_CONN_RDMAMUST NOT<bcp14>MUST NOT</bcp14> be set in csr_flags. Note that once the server agrees to step up, it and the clientMUST<bcp14>MUST</bcp14> exchange all future traffic on the connection with RPC RDMA framing and not Record Marking (<xref target="RFC8166"/>). </t> </list> </t> <t hangText="csa_fore_chan_attrs, csa_fore_chan_attrs:"/>format="default"/>). </dd> </dl> </dd> <dt>csa_fore_chan_attrs, csa_back_chan_attrs:</dt> <dd> <t> The csa_fore_chan_attrs and csa_back_chan_attrs fields apply to attributes of the fore channel (which conveys requests originating from the client to the server), and the backchannel (the channel that conveys callback requests originating from the server to the client), respectively. The results are in corresponding structures called csr_fore_chan_attrs and csr_back_chan_attrs. The results establish attributes for each channel, and on all subsequent use of each channel of the session. Each structure has the following fields:<list style="hanging"> <t hangText="ca_headerpadsize:"/></t> <dl newline="true" spacing="normal"> <dt>ca_headerpadsize:</dt> <dd> <t> The maximum amount of padding the requester is willing to apply to ensure that write payloads are aligned on some boundary at the replier. For each channel, the server<list style="symbols"> <t></t> <ul spacing="normal"> <li> will reply in ca_headerpadsize with its preferred value, or zero if padding is not in use, and</t> <t> MAY</li> <li> <bcp14>MAY</bcp14> decrease this value butMUST NOT<bcp14>MUST NOT</bcp14> increase it.</t> </list> </t> <t hangText="ca_maxrequestsize:"/> <t></li> </ul> </dd> <dt>ca_maxrequestsize:</dt> <dd> The maximum size of a COMPOUND or CB_COMPOUND request that will be sent. This size represents the XDR encoded size of the request, including the RPC headers (including security flavor credentials and verifiers) but excludes any RPC transport framing headers. Imagine a request coming over a non-RDMA TCP/IP connection, and that it has a single Record Marking header preceding it. The maximum allowable count encoded in the header will be ca_maxrequestsize. If a requester sends a request that exceeds ca_maxrequestsize, the error NFS4ERR_REQ_TOO_BIG will be returned per the description in <xref target="COMPOUND_Sizing_Issues"/>.format="default"/>. For each channel, the serverMAY<bcp14>MAY</bcp14> decrease this value butMUST NOT<bcp14>MUST NOT</bcp14> increase it.</t> <t hangText="ca_maxresponsesize:"/> <t></dd> <dt>ca_maxresponsesize:</dt> <dd> The maximum size of a COMPOUND or CB_COMPOUND reply that the requester will accept from the replier including RPC headers (see the ca_maxrequestsize definition). For each channel, the serverMAY<bcp14>MAY</bcp14> decrease this value, butMUST NOT<bcp14>MUST NOT</bcp14> increase it. However, if the client selects a value for ca_maxresponsesize such that a replier on a channel could never send a response, the serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_TOOSMALL in the CREATE_SESSION reply. After the session is created, if a requester sends a request for which the size of the reply would exceed this value, the replier will return NFS4ERR_REP_TOO_BIG, per the description in <xref target="COMPOUND_Sizing_Issues"/>. </t> <t hangText="ca_maxresponsesize_cached:"/> <t>format="default"/>. </dd> <dt>ca_maxresponsesize_cached:</dt> <dd> Like ca_maxresponsesize, but the maximum size of a reply that will be stored in the reply cache (<xref target="Slot_Identifiers_and_Server_Reply_Cache"/>).format="default"/>). For each channel, the serverMAY<bcp14>MAY</bcp14> decrease this value, butMUST NOT<bcp14>MUST NOT</bcp14> increase it. If, in the reply to CREATE_SESSION, the value of ca_maxresponsesize_cached of a channel is less than the value of ca_maxresponsesize of the same channel, then this is an indication to the requester that it needs to be selective about which replies it directs the replier to cache; for example, large replies fromnonidempotentnon-idempotent operations (e.g., COMPOUND requests with a READ operation) should not be cached. The requester decides which replies to cache via an argument to the SEQUENCE (the sa_cachethis field, see <xref target="OP_SEQUENCE"/>)format="default"/>) or CB_SEQUENCE (the csa_cachethis field, see <xref target="OP_CB_SEQUENCE"/>)format="default"/>) operations. After the session is created, if a requester sends a request for which the size of the reply would exceed ca_maxresponsesize_cached, the replier will return NFS4ERR_REP_TOO_BIG_TO_CACHE, per the description in <xref target="COMPOUND_Sizing_Issues"/>. </t> <t hangText="ca_maxoperations:"/> <t>format="default"/>. </dd> <dt>ca_maxoperations:</dt> <dd> The maximum number of operations the replier will accept in a COMPOUND or CB_COMPOUND. For the backchannel, the serverMUST NOT<bcp14>MUST NOT</bcp14> change the value the client offers. For the fore channel, the serverMAY<bcp14>MAY</bcp14> change the requested value. After the session is created, if a requester sends a COMPOUND or CB_COMPOUND with more operations than ca_maxoperations, the replierMUST<bcp14>MUST</bcp14> return NFS4ERR_TOO_MANY_OPS.</t> <t hangText="ca_maxrequests:"/> <t></dd> <dt>ca_maxrequests:</dt> <dd> The maximum number of concurrent COMPOUND or CB_COMPOUND requests the requester will send on the session. Subsequent requests will each be assigned a slot identifier by the requester within the range zero to ca_maxrequests - 1 inclusive. For the backchannel, the serverMUST NOT<bcp14>MUST NOT</bcp14> change the value the client offers. For the fore channel, the serverMAY<bcp14>MAY</bcp14> change the requested value.</t> <t hangText="ca_rdma_ird:"/> <t></dd> <dt>ca_rdma_ird:</dt> <dd> This array has a maximum of one element. If this array has one element, then the element contains the inbound RDMA read queue depth (IRD). For each channel, the serverMAY<bcp14>MAY</bcp14> decrease this value, butMUST NOT<bcp14>MUST NOT</bcp14> increase it.</t> </list> </t> <t hangText="csa_cb_program"/> <t></dd></dl></dd> <dt>csa_cb_program</dt> <dd> This is the ONC RPC program number the serverMUST<bcp14>MUST</bcp14> use in any callbacks sent through the backchannel to the client. The serverMUST<bcp14>MUST</bcp14> specify an ONC RPC program number equal to csa_cb_program and an ONC RPC version number equal to 4 in callbacks sent to the client. If a CB_COMPOUND is sent to the client, the serverMUST<bcp14>MUST</bcp14> use a minor version number of 1. There is no corresponding result.</t> <t hangText="csa_sec_parms"/></dd> <dt>csa_sec_parms</dt> <dd> <t> The field csa_sec_parms is an array of acceptable security credentials the server can use on the session's backchannel. Three security flavors are supported: AUTH_NONE, AUTH_SYS, and RPCSEC_GSS. If AUTH_NONE is specified for a credential, then this says the client is authorizing the server to use AUTH_NONE on all callbacks for the session. If AUTH_SYS is specified, then the client is authorizing the server to use AUTH_SYS on all callbacks, using the credential specified cbsp_sys_cred. If RPCSEC_GSS is specified, then the server is allowed to use the RPCSEC_GSS context specified in cbsp_gss_parms as the RPCSEC_GSS context in the credential of the RPC header of callbacks to the client. There is no corresponding result.<vspace blankLines='1' /></t> <t> The RPCSEC_GSS context for the backchannel is specified via a pair of values of data type gsshandle4_t. The data type gsshandle4_t represents an RPCSEC_GSS handle, and is precisely the same as the data type of the "handle" field of the rpc_gss_init_res data type defined inSection 5.2.3.1,"Context Creation Response - Successful Acceptance",of<xref target="RFC2203"/>. <vspace blankLines='1' />sectionFormat="of" section="5.2.3.1"/>. </t> <t> The first RPCSEC_GSS handle, gcbp_handle_from_server, is the fore handle the server returned to the client (either in the handle field of data type rpc_gss_init_res or as one of the elements of the spi_handles field returned in the reply to EXCHANGE_ID) when the RPCSEC_GSS context was created on the server. The second handle, gcbp_handle_from_client, is the back handle to which the client will map the RPCSEC_GSS context. The server can immediately use the value of gcbp_handle_from_client in the RPCSEC_GSS credential in callback RPCs. That is, the value in gcbp_handle_from_client can be used as the value of the field "handle" in data type rpc_gss_cred_t (seeSection 5,"Elements of the RPCSEC_GSS Security Protocol",of<xref target="RFC2203"/>)sectionFormat="of" section="5"/>) in callback RPCs. The serverMUST<bcp14>MUST</bcp14> use the RPCSEC_GSS security service specified in gcbp_service, i.e., itMUST<bcp14>MUST</bcp14> set the "service" field of the rpc_gss_cred_t data type in RPCSEC_GSS credential to the value of gcbp_service (seeSection 5.3.1,"RPC Request Header",of<xref target="RFC2203"/>). <vspace blankLines='1' />sectionFormat="of" section="5.3.1"/>). </t> <t> If the RPCSEC_GSS handle identified by gcbp_handle_from_server does not exist on the server, the server will return NFS4ERR_NOENT.<vspace blankLines='1' /></t> <t> Within each element of csa_sec_parms, the fore and back RPCSEC_GSS contextsMUST<bcp14>MUST</bcp14> share the same GSS context andMUST<bcp14>MUST</bcp14> have the same seq_window (see Section5.2.3.1<xref target="RFC2203" sectionFormat="bare" section="5.2.3.1"/> of RFC 2203 <xreftarget="RFC2203">RFC2203</xref>).target="RFC2203" format="default"/>). The fore and back RPCSEC_GSS context state are independent of each other as far as the RPCSEC_GSS sequence number (see the seq_num field in the rpc_gss_cred_t data type of Sections5<xref target="RFC2203" sectionFormat="bare" section="5"/> and5.3.1<xref target="RFC2203" sectionFormat="bare" section="5.3.1"/> of <xref target="RFC2203"/>). <vspace blankLines='1' />format="default"/>). </t> <t> If an RPCSEC_GSS handle is using the SSV context (see <xreftarget="ssv_mech"/>),target="ssv_mech" format="default"/>), then because each SSV RPCSEC_GSS handle shares a common SSV GSS context, there are security considerations specific to this situation discussed in <xreftarget="rpcsec_ssv_consider"/>. <vspace blankLines='1' /> </t> </list>target="rpcsec_ssv_consider" format="default"/>. </t> </dd> </dl> <t> Once the session is created, the first SEQUENCE or CB_SEQUENCE received on a slotMUST<bcp14>MUST</bcp14> have a sequence ID equal to 1; if not, the replierMUST<bcp14>MUST</bcp14> return NFS4ERR_SEQ_MISORDERED. </t> </section> <section toc="exclude" anchor="OP_CREATE_SESSION_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> To describe a possible implementation, the same notation for client records introduced in the description of EXCHANGE_ID is used with the following addition:<list style="empty"> <t></t> <ul empty="true" spacing="normal"> <li> clientid_arg: The value of the csa_clientid field of the CREATE_SESSION4args structure of the current request.</t> </list> </t></li> </ul> <t> Since CREATE_SESSION is a non-idempotent operation, we need to consider the possibility that retries may occur as a result of a client restart, network partition, malfunctioning router, etc. For each client ID created by EXCHANGE_ID, the server maintains a separate reply cache (called the CREATE_SESSION reply cache) similar to the session reply cache used for SEQUENCE operations, with two distinctions.<list style="symbols"> <t></t> <ul spacing="normal"> <li> First, this is a reply cache just for detecting and processing CREATE_SESSION requests for a given client ID.</t> <t></li> <li> Second, the size of the client ID reply cache is of one slot (and as a result, the CREATE_SESSION request does not carry a slot number). This means that at most one CREATE_SESSION request for a given client ID can be outstanding.</t> </list></li> </ul> <t> As previously stated, CREATE_SESSION can be sent with or without a preceding SEQUENCE operation. Even if a SEQUENCE precedes CREATE_SESSION, the serverMUST<bcp14>MUST</bcp14> maintain the CREATE_SESSION reply cache, which is separate from the reply cache for the session associated with a SEQUENCE. If CREATE_SESSION was originally sent by itself, the clientMAY<bcp14>MAY</bcp14> send a retry of the CREATE_SESSION operation within a COMPOUND preceded by a SEQUENCE. If CREATE_SESSION was originally sent in a COMPOUND that started with a SEQUENCE, then the clientSHOULD<bcp14>SHOULD</bcp14> send a retry in a COMPOUND that starts with a SEQUENCE that has the same session ID as the SEQUENCE of the original request. However, the clientMAY<bcp14>MAY</bcp14> send a retry in a COMPOUND that either has no preceding SEQUENCE, or has a preceding SEQUENCE that refers to a different session than the original CREATE_SESSION. This might be necessary if the client sends a CREATE_SESSION in a COMPOUND preceded by a SEQUENCE with session ID X, and session X no longer exists. Regardless, any retry of CREATE_SESSION, with or without a preceding SEQUENCE,MUST<bcp14>MUST</bcp14> use the same value of csa_sequence as the original. </t> <t> After the client received a reply to an EXCHANGE_ID operation that contains a new, unconfirmed client ID, the server expects the client to follow with a CREATE_SESSION operation to confirm the client ID. The server expects value of csa_sequenceid in the arguments to that CREATE_SESSION to be to equal the value of the field eir_sequenceid that was returned in results of the EXCHANGE_ID that returned the unconfirmed client ID. Before the server replies to that EXCHANGE_ID operation, it initializes the client ID slot to be equal to eir_sequenceid - 1 (accounting for underflow), and records a contrived CREATE_SESSION result with a "cached" result of NFS4ERR_SEQ_MISORDERED. With the client ID slot thus initialized, the processing of the CREATE_SESSION operation is divided into four phases:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Client record look up. The server looks up the client ID in its client record table. If the server contains no records with client ID equal to clientid_arg, then most likely the client's state has been purged during a period of inactivity, possibly due to a loss of connectivity. NFS4ERR_STALE_CLIENTID is returned, and no changes are made to any client records on the server. Otherwise, the server goes to phase 2.</t> <t></li> <li> Sequence ID processing. If csa_sequenceid is equal to the sequence ID in the client ID's slot, then this is a replay of the previous CREATE_SESSION request, and the server returns the cached result. If csa_sequenceid is not equal to the sequence ID in the slot, and is more than one greater (accounting for wraparound), then the server returns the error NFS4ERR_SEQ_MISORDERED, and does not change the slot. If csa_sequenceid is equal to the slot's sequence ID + 1 (accounting for wraparound), then the slot's sequence ID is set to csa_sequenceid, and the CREATE_SESSION processing goes to the next phase. A subsequent new CREATE_SESSION call over the same client IDMUST<bcp14>MUST</bcp14> use a csa_sequenceid that is one greater than the sequence ID in the slot.</t></li> <li> <t> Client ID confirmation. If this would be the first session for the client ID, the CREATE_SESSION operation serves to confirm the client ID. Otherwise, the client ID confirmation phase is skipped and only the session creation phase occurs. Any case in which there is more than one record with identical values for client ID represents a server implementation error. Operation in the potential valid cases is summarized as follows.<list style="symbols"></t> <ul spacing="normal"> <li> <t>Successful Confirmation<list style="empty"> <t></t> <ul empty="true" spacing="normal"> <li> If the server has the following unconfirmed record, then this is the expected confirmation of an unconfirmed record.</t> <t></li> <li> { ownerid, verifier, principal_arg, clientid_arg, unconfirmed }</t> <t></li> <li> As noted in <xref target="OP_EXCHANGE_ID_IMPLEMENTATION"/>,format="default"/>, the server might also have the following confirmed record.</t> <t></li> <li> { ownerid, old_verifier, principal_arg, old_clientid, confirmed }</t> <t></li> <li> The server schedules the replacement of both records with:</t> <t></li> <li> { ownerid, verifier, principal_arg, clientid_arg, confirmed }</t> <t></li> <li> The processing of CREATE_SESSION continues on to session creation. Once the session is successfully created, the scheduled client record replacement is committed. If the session is not successfully created, then no changes are made to any client records on the server.</t> </list> </t></li> </ul> </li> <li> <t>Unsuccessful Confirmation<list style="empty"> <t></t> <ul empty="true" spacing="normal"> <li> If the server has the following record, then the client has changed principals after the previous EXCHANGE_ID request, or there has been a chance collision between shorthand client identifiers.</t> <t></li> <li> { *, *, old_principal_arg, clientid_arg, * }</t> <t></li> <li> Neither of these cases is permissible. Processing stops and NFS4ERR_CLID_INUSE is returned to the client. No changes are made to any client records on the server.</t> </list> </t> </list> </t></li> </ul> </li> </ul> </li> <li> <t> Session creation. The server confirmed the client ID, either in this CREATE_SESSION operation, or a previous CREATE_SESSION operation. The server examines the remaining fields of the arguments.<vspace blankLines='1' /></t> <t> The server creates the session by recording the parameter values used (including whether the CREATE_SESSION4_FLAG_PERSIST flag is set and has been accepted by the server) and allocating space for the session reply cache (if there is not enough space, the server returns NFS4ERR_NOSPC). For each slot in the reply cache, the server sets the sequence ID to zero, and records an entry containing a COMPOUND reply with zero operations and the error NFS4ERR_SEQ_MISORDERED. This way, if the first SEQUENCE request sent has a sequence ID equal to zero, the server can simply return what is in the reply cache: NFS4ERR_SEQ_MISORDERED. The client initializes its reply cache for receiving callbacks in the same way, and similarly, the first CB_SEQUENCE operation on a slot after session creationMUST<bcp14>MUST</bcp14> have a sequence ID of one.<vspace blankLines='1' /></t> <t> If the session state is created successfully, the server associates the session with the client ID provided by the client.<vspace blankLines='1' /></t> <t> When a request that had CREATE_SESSION4_FLAG_CONN_RDMA set needs to be retried, the retryMUST<bcp14>MUST</bcp14> be done on a new connection that is in non-RDMA mode. If properties of the new connection are different enough that the arguments to CREATE_SESSION need to change, then a non-retryMUST<bcp14>MUST</bcp14> be sent. The server will eventually dispose of any session that was created on the original connection. </t></list> </t></li> </ol> <t> On the backchannel, the client and server might wish to have many slots, in some cases perhaps more that the fore channel, in order to deal with the situations where the network link has high latency and is the primary bottleneck for response to recalls. If so, and if the client provides too few slots to the backchannel, the server might limit the number of recallable objects it gives to the client. </t> <t> Implementing RPCSEC_GSS callback support requires changes to both the client and server implementations of RPCSEC_GSS. One possible set of changes includes:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Adding a data structure that wraps the GSS-API context with a reference count.</t> <t></li> <li> New functions to increment and decrement the reference count. If the reference count is decremented to zero, the wrapper data structure and the GSS-API context it refers to would be freed.</t> <t></li> <li> Change RPCSEC_GSS to create the wrapper data structure upon receiving GSS-API context from gss_accept_sec_context() and gss_init_sec_context(). The reference count would be initialized to 1.</t> <t></li> <li> Adding a function to map an existing RPCSEC_GSS handle to a pointer to the wrapper data structure. The reference count would be incremented.</t> <t></li> <li> Adding a function to create a new RPCSEC_GSS handle from a pointer to the wrapper data structure. The reference count would be incremented.</t> <t></li> <li> Replacing calls from RPCSEC_GSS that free GSS-API contexts, with calls to decrement the reference count on the wrapper data structure.</t> </list> </t></li> </ul> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_DESTROY_SESSION"title="Operationnumbered="true" toc="default"> <name>Operation 44: DESTROY_SESSION - Destroy aSession" >Session</name> <section toc="exclude" anchor="OP_DESTROY_SESSION_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct DESTROY_SESSION4args { sessionid4 dsa_sessionid;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DESTROY_SESSION_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct DESTROY_SESSION4res { nfsstat4 dsr_status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DESTROY_SESSION_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The DESTROY_SESSION operation closes the session and discards the session's reply cache, if any. Any remaining connections associated with the session are immediately disassociated. If the connection has no remaining associated sessions, the connectionMAY<bcp14>MAY</bcp14> be closed by the server. Locks, delegations, layouts, wants, and the lease, which are all tied to the client ID, are not affected by DESTROY_SESSION. </t> <t> DESTROY_SESSIONMUST<bcp14>MUST</bcp14> be invoked on a connection that is associated with the session being destroyed. In addition, if SP4_MACH_CRED state protection was specified when the client ID was created, the RPCSEC_GSS principal that created the sessionMUST<bcp14>MUST</bcp14> be the one that destroys the session, using RPCSEC_GSS privacy or integrity. If SP4_SSV state protection was specified when the client ID was created, RPCSEC_GSS using the SSV mechanism (<xref target="ssv_mech"/>) MUSTformat="default"/>) <bcp14>MUST</bcp14> be used, with integrity or privacy. </t> <t> If the COMPOUND request starts with SEQUENCE, and if the sessionids specified in SEQUENCE and DESTROY_SESSION are the same, then<list style="symbols"> <t></t> <ul spacing="normal"> <li> DESTROY_SESSIONMUST<bcp14>MUST</bcp14> be the final operation in the COMPOUND request.</t> <t></li> <li> It is advisable to avoid placing DESTROY_SESSION in a COMPOUND request with other state-modifying operations, because the DESTROY_SESSION will destroy the reply cache.</t> <t></li> <li> Because the session and its reply cache are destroyed, a client that retries the request may receive an error in reply to the retry, even though the original request was successful.</t> </list> </t></li> </ul> <t> If the COMPOUND request starts with SEQUENCE, and if the sessionids specified in SEQUENCE and DESTROY_SESSION are different, then DESTROY_SESSION can appear in any position of the COMPOUND request (except for the first position). The two sessionids can belong to different client IDs. </t> <t> If the COMPOUND request does not start with SEQUENCE, and if DESTROY_SESSION is not the sole operation, then serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOT_ONLY_OP. </t> <t> If there is a backchannel on the session and the server has outstanding CB_COMPOUND operations for the session which have not been replied to, then the serverMAY<bcp14>MAY</bcp14> refuse to destroy the session and return an error. If so, then in the event the backchannel is down, the serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_CB_PATH_DOWN to inform the client that the backchannel needs to be repaired before the server will allow the session to be destroyed. Otherwise, the error CB_BACK_CHAN_BUSYSHOULD<bcp14>SHOULD</bcp14> be returned to indicate that there are CB_COMPOUNDs that need to be replied to. The clientSHOULD<bcp14>SHOULD</bcp14> reply to all outstanding CB_COMPOUNDs before re-sending DESTROY_SESSION. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_FREE_STATEID"title="Operationnumbered="true" toc="default"> <name>Operation 45: FREE_STATEID - Free Stateid with NoLocks" >Locks</name> <section toc="exclude" anchor="OP_FREE_STATEID_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct FREE_STATEID4args { stateid4 fsa_stateid;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_FREE_STATID_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct FREE_STATEID4res { nfsstat4 fsr_status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_FREE_STATEID4_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The FREE_STATEID operation is used to free a stateid that no longer has any associated locks (including opens, byte-range locks, delegations, and layouts). This may be because of client LOCKU operations or because of server revocation. If there are valid locks (of any kind) associated with the stateid in question, the error NFS4ERR_LOCKS_HELD will be returned, and the associated stateid will not be freed. </t> <t> When a stateid is freed that had been associated with revoked locks, by sending the FREE_STATEID operation, the client acknowledges the loss of those locks. This allows the server, once all such revoked state is acknowledged, to allow that client again to reclaim locks, without encountering the edge conditions discussed in <xref target="server_failure"/>.format="default"/>. </t> <t> Once a successful FREE_STATEID is done for a given stateid, any subsequent use of that stateid will result in an NFS4ERR_BAD_STATEID error. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_GET_DIR_DELEGATION"title="Operationnumbered="true" toc="default"> <name>Operation 46: GET_DIR_DELEGATION - Get a DirectoryDelegation" >Delegation</name> <section toc="exclude" anchor="OP_GET_DIR_DELEGATION_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ typedef nfstime4 attr_notice4; struct GET_DIR_DELEGATION4args { /* CURRENT_FH: delegated directory */ bool gdda_signal_deleg_avail; bitmap4 gdda_notification_types; attr_notice4 gdda_child_attr_delay; attr_notice4 gdda_dir_attr_delay; bitmap4 gdda_child_attributes; bitmap4 gdda_dir_attributes;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GET_DIR_DELEGATION_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct GET_DIR_DELEGATION4resok { verifier4 gddr_cookieverf; /* Stateid for get_dir_delegation */ stateid4 gddr_stateid; /* Which notifications can the server support */ bitmap4 gddr_notification; bitmap4 gddr_child_attributes; bitmap4 gddr_dir_attributes; }; enum gddrnf4_status { GDD4_OK = 0, GDD4_UNAVAIL = 1 }; union GET_DIR_DELEGATION4res_non_fatal switch (gddrnf4_status gddrnf_status) { case GDD4_OK: GET_DIR_DELEGATION4resok gddrnf_resok4; case GDD4_UNAVAIL: bool gddrnf_will_signal_deleg_avail; }; union GET_DIR_DELEGATION4res switch (nfsstat4 gddr_status) { case NFS4_OK: GET_DIR_DELEGATION4res_non_fatal gddr_res_non_fatal4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GET_DIR_DELEGATION_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The GET_DIR_DELEGATION operation is used by a client to request a directory delegation. The directory is represented by the current filehandle. The client also specifies whether it wants the server to notify it when the directory changes in certain ways by setting one or more bits in a bitmap. The server may refuse to grant the delegation. In that case, the server will return NFS4ERR_DIRDELEG_UNAVAIL. If the server decides to hand out the delegation, it will return a cookie verifier for that directory. If the cookie verifier changes when the client is holding the delegation, the delegation will be recalled unless the client has asked for notification for this event. </t> <t> The server will also return a directory delegation stateid, gddr_stateid, as a result of the GET_DIR_DELEGATION operation. This stateid will appear in callback messages related to the delegation, such as notifications and delegation recalls. The client will use this stateid to return the delegation voluntarily or upon recall. A delegation is returned by calling the DELEGRETURN operation. </t> <t> The server might not be able to support notifications of certain events. If the client asks for such notifications, the serverMUST<bcp14>MUST</bcp14> inform the client of its inability to do so as part of the GET_DIR_DELEGATION reply by not setting the appropriate bits in the supported notifications bitmask, gddr_notification, contained in the reply. The serverMUST NOT<bcp14>MUST NOT</bcp14> add bits to gddr_notification that the client did not request. </t> <t> The GET_DIR_DELEGATION operation can be used for both normal and named attribute directories. </t> <t> If client sets gdda_signal_deleg_avail to TRUE, then it is registering with the client a "want" for a directory delegation. If the delegation is not available, and the server supports and will honor the "want", the results will have gddrnf_will_signal_deleg_avail set to TRUE and no error will be indicated on return. If so, the client should expect a future CB_RECALLABLE_OBJ_AVAIL operation to indicate that a directory delegation is available. If the server does not wish to honor the "want" or is not able to do so, it returns the error NFS4ERR_DIRDELEG_UNAVAIL. If the delegation is immediately available, the serverSHOULD<bcp14>SHOULD</bcp14> return it with the response to the operation, rather than via a callback. </t> <t> When a client makes a request for a directory delegation while it already holds a directory delegation for that directory (including the case where it has been recalled but not yet returned by the client or revoked by the server), the serverMUST<bcp14>MUST</bcp14> reply with the value of gddr_status set to NFS4_OK, the value of gddrnf_status set to GDD4_UNAVAIL, and the value of gddrnf_will_signal_deleg_avail set to FALSE. The delegation the client held before the request remains intact, and its state is unchanged. The current stateid is not changed (see <xreftarget="current_stateid"/>target="current_stateid" format="default"/> for a description of the current stateid). </t> </section> <section toc="exclude" anchor="OP_GET_DIR_DELEGATION_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Directory delegations provide the benefit of improving cache consistency of namespace information. This is done through synchronous callbacks. A server must support synchronous callbacks in order to support directory delegations. In addition to that, asynchronous notifications provide a way to reduce network traffic as well as improve client performance in certain conditions. </t> <t> Notifications are specified in terms of potential changes to the directory. A client can ask to be notified of events by setting one or more bits in gdda_notification_types. The client can ask for notifications on addition of entries to a directory (by setting the NOTIFY4_ADD_ENTRY in gdda_notification_types), notifications on entry removal (NOTIFY4_REMOVE_ENTRY), renames (NOTIFY4_RENAME_ENTRY), directory attribute changes (NOTIFY4_CHANGE_DIR_ATTRIBUTES), and cookie verifier changes (NOTIFY4_CHANGE_COOKIE_VERIFIER) by setting one or more corresponding bits in the gdda_notification_types field. </t> <t> The client can also ask for notifications of changes to attributes of directory entries (NOTIFY4_CHANGE_CHILD_ATTRIBUTES) in order to keep its attribute cache up to date. However, any changes made to child attributes do not cause the delegation to be recalled. If a client is interested in directory entry caching or negative name caching, it can set the gdda_notification_types appropriately to its particular need and the server will notify it of all changes that would otherwise invalidate its name cache. The kind of notification a client asks for may depend on the directory size, its rate of change, and the applications being used to access that directory. The enumeration of the conditions under which a client might ask for a notification is out of the scope of this specification. </t> <t> For attribute notifications, the client will set bits in the gdda_dir_attributes bitmap to indicate which attributes it wants to be notified of. If the server does not support notifications for changes to a certain attribute, itSHOULD NOT<bcp14>SHOULD NOT</bcp14> set that attribute in the supported attribute bitmap specified in the reply (gddr_dir_attributes). The client will also set in the gdda_child_attributes bitmap the attributes of directory entries it wants to be notified of, and the server will indicate in gddr_child_attributes which attributes of directory entries it will notify the client of. </t> <t> The client will also let the server know if it wants to get the notification as soon as the attribute change occurs or after a certain delay by setting a delay factor; gdda_child_attr_delay is for attribute changes to directory entries and gdda_dir_attr_delay is for attribute changes to the directory. If this delay factor is set to zero, that indicates to the server that the client wants to be notified of any attribute changes as soon as they occur. If the delay factor is set to N seconds, the server will make a best-effort guarantee that attribute updates are synchronized within N seconds. If the client asks for a delay factor that the server does not support or that may cause significant resource consumption on the server by causing the server to send a lot of notifications, the server should not commit to sending out notifications for attributes and therefore must not set the appropriate bit in the gddr_child_attributes and gddr_dir_attributes bitmaps in the response. </t> <t> The clientMUST<bcp14>MUST</bcp14> use a security tuple (<xreftarget="NFSv4_Security_Tuples"/>)target="NFSv4_Security_Tuples" format="default"/>) that the directory or its applicable ancestor (<xreftarget="Security_Service_Negotiation"/>)target="Security_Service_Negotiation" format="default"/>) is exported with. If not, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_WRONGSEC to the operation that both precedes GET_DIR_DELEGATION and sets the current filehandle (see <xreftarget="using_secinfo"/>).target="using_secinfo" format="default"/>). </t> <t> The directory delegation covers all the entries in the directory except the parent entry. That means if a directory and its parent both hold directory delegations, any changes to the parent will not cause a notification to be sent for the child even though the child's parent entry points to the parent directory. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_GETDEVICEINFO"title="Operationnumbered="true" toc="default"> <name>Operation 47: GETDEVICEINFO - Get DeviceInformation" >Information</name> <section toc="exclude" anchor="OP_GETDEVICEINFO_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct GETDEVICEINFO4args { deviceid4 gdia_device_id; layouttype4 gdia_layout_type; count4 gdia_maxcount; bitmap4 gdia_notify_types;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETDEVICEINFO_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct GETDEVICEINFO4resok { device_addr4 gdir_device_addr; bitmap4 gdir_notification; }; union GETDEVICEINFO4res switch (nfsstat4 gdir_status) { case NFS4_OK: GETDEVICEINFO4resok gdir_resok4; case NFS4ERR_TOOSMALL: count4 gdir_mincount; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETDEVICEINFO_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The GETDEVICEINFO operation returns pNFS storage device address information for the specified device ID. The client identifies the device information to be returned by providing the gdia_device_id and gdia_layout_type that uniquely identify the device. The client provides gdia_maxcount to limit the number of bytes for the result. This maximum size represents all of the data being returned within the GETDEVICEINFO4resok structure and includes the XDR overhead. The server may return less data. If the server is unable to return any information within the gdia_maxcount limit, the error NFS4ERR_TOOSMALL will be returned. However, if gdia_maxcount is zero, NFS4ERR_TOOSMALLMUST NOT<bcp14>MUST NOT</bcp14> be returned. </t> <t> The da_layout_type field of the gdir_device_addr returned by the serverMUST<bcp14>MUST</bcp14> be equal to the gdia_layout_type specified by the client. If it is not equal, the clientSHOULD<bcp14>SHOULD</bcp14> ignore the response as invalid and behave as if the server returned an error, even if the client does have support for the layout type returned. </t> <t> The client also provides a notification bitmap, gdia_notify_types, for the device ID mapping notification for which it is interested in receiving; the server must support device ID notifications for the notification request to have affect. The notification mask is composed in the same manner as the bitmap for file attributes (<xref target="fattr4"/>).format="default"/>). The numbers of bit positions are listed in the notify_device_type4 enumeration type (<xref target="OP_CB_NOTIFY_DEVICEID"/>).format="default"/>). Only two enumerated values of notify_device_type4 currently apply to GETDEVICEINFO: NOTIFY_DEVICEID4_CHANGE and NOTIFY_DEVICEID4_DELETE (see <xref target="OP_CB_NOTIFY_DEVICEID"/>).format="default"/>). </t> <t> The notification bitmap applies only to the specified device ID. If a client sends a GETDEVICEINFO operation on a deviceID multiple times, the last notification bitmap is used by the server for subsequent notifications. If the bitmap is zero or empty, then the device ID's notifications are turned off. </t> <t> If the client wants to just update or turn off notifications, itMAY<bcp14>MAY</bcp14> send a GETDEVICEINFO operation with gdia_maxcount set to zero. In that event, if the device ID is valid, the reply's da_addr_body field of the gdir_device_addr field will be of zero length. </t> <t> If an unknown device ID is given in gdia_device_id, the server returns NFS4ERR_NOENT. Otherwise, the device address information is returned in gdir_device_addr. Finally, if the server supports notifications for device ID mappings, the gdir_notification result will contain a bitmap of which notifications it will actually send to the client (via CB_NOTIFY_DEVICEID, see <xref target="OP_CB_NOTIFY_DEVICEID"/>).format="default"/>). </t> <t> If NFS4ERR_TOOSMALL is returned, the results also contain gdir_mincount. The value of gdir_mincount represents the minimum size necessary to obtain the device information. </t> </section> <section toc="exclude" anchor="OP_GETDEVICEINFO_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Aside from updating or turning off notifications, another use case for gdia_maxcount being set to zero is to validate a device ID. </t> <t> The clientSHOULD<bcp14>SHOULD</bcp14> request a notification for changes or deletion of a device ID to device address mapping so that the server can allow the client gracefully use a new mapping, without having pending I/O fail abruptly, or force layouts using the device ID to be recalled or revoked. </t> <t> It is possible that GETDEVICEINFO (and GETDEVICELIST) will race with CB_NOTIFY_DEVICEID, i.e., CB_NOTIFY_DEVICEID arrives before the client gets and processes the response to GETDEVICEINFO or GETDEVICELIST. The analysis of the race leverages the fact that the serverMUST NOT<bcp14>MUST NOT</bcp14> delete a device ID that is referred to by a layout the client has.<list style="symbols"></t> <ul spacing="normal"> <li> <t> CB_NOTIFY_DEVICEID deletes a device ID. If the client believes it has layouts that refer to the device ID, then it is possible that layouts referring to the deleted device ID have been revoked. The client should send a TEST_STATEID request using the stateid for each layout that might have been revoked. If TEST_STATEID indicates that any layouts have been revoked, the client must recover from layout revocation as described in <xref target="revoke_layout"/>.format="default"/>. If TEST_STATEID indicates that at least one layout has not been revoked, the client should send a GETDEVICEINFO operation on the supposedly deleted device ID to verify that the device ID has been deleted.<vspace blankLines='1' /></t> <t> If GETDEVICEINFO indicates that the device ID does not exist, then the client assumes the server is faulty and recovers by sending an EXCHANGE_ID operation. If GETDEVICEINFO indicates that the device ID does exist, then while the server is faulty for sending an erroneous device ID deletion notification, the degree to which it is faulty does not require the client to create a new client ID.<vspace blankLines='1' /></t> <t> If the client does not have layouts that refer to the device ID, no harm is done. The client should mark the device ID as deleted, and when GETDEVICEINFO or GETDEVICELIST results are received that indicate that the device ID has been in fact deleted, the device ID should be removed from the client's cache. </t><t></li> <li> CB_NOTIFY_DEVICEID indicates that a device ID's device addressing mappings have changed. The client should assume that the results from the in-progress GETDEVICEINFO will be stale for the device ID once received, and so it should send another GETDEVICEINFO on the device ID.</t> </list> </t></li> </ul> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_GETDEVICELIST"title="Operationnumbered="true" toc="default"> <name>Operation 48: GETDEVICELIST - Get All Device Mappings for a FileSystem" >System</name> <section toc="exclude" anchor="OP_GETDEVICELIST_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct GETDEVICELIST4args { /* CURRENT_FH: object belonging to the file system */ layouttype4 gdla_layout_type; /* number of deviceIDs to return */ count4 gdla_maxdevices; nfs_cookie4 gdla_cookie; verifier4 gdla_cookieverf;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETDEVICELIST_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct GETDEVICELIST4resok { nfs_cookie4 gdlr_cookie; verifier4 gdlr_cookieverf; deviceid4gdlr_deviceid_list<>;gdlr_deviceid_list<>; bool gdlr_eof; }; union GETDEVICELIST4res switch (nfsstat4 gdlr_status) { case NFS4_OK: GETDEVICELIST4resok gdlr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_GETDEVICELIST_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is used by the client to enumerate all of the device IDs that a server's file system uses. </t> <t> The client provides a current filehandle of a file object that belongs to the file system (i.e., all file objects sharing the same fsid as that of the current filehandle) and the layout type in gdia_layout_type. Since this operation might require multiple calls to enumerate all the device IDs (and is thus similar to the <xreftarget="OP_READDIR">target="OP_READDIR" format="default"> READDIR</xref> operation), the client also provides gdia_cookie and gdia_cookieverf to specify the current cursor position in the list. When the client wants to read from the beginning of the file system's device mappings, it sets gdla_cookie to zero. The field gdla_cookieverfMUST<bcp14>MUST</bcp14> be ignored by the server when gdla_cookie is zero. The client provides gdla_maxdevices to limit the number of device IDs in the result. If gdla_maxdevices is zero, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. The serverMAY<bcp14>MAY</bcp14> return fewer device IDs. </t> <t> The successful response to the operation will contain the cookie, gdlr_cookie, and the cookie verifier, gdlr_cookieverf, to be used on the subsequent GETDEVICELIST. A gdlr_eof value of TRUE signifies that there are no remaining entries in the server's device list. Each element of gdlr_deviceid_list contains a device ID. </t> </section> <section toc="exclude" anchor="OP_GETDEVICELIST_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> An example of the use of this operation is for pNFS clients and servers that use LAYOUT4_BLOCK_VOLUME layouts. In these environments it may be helpful for a client to determine device accessibility upon first file system access. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LAYOUTCOMMIT"title="Operationnumbered="true" toc="default"> <name>Operation 49: LAYOUTCOMMIT - Commit Writes Made Using aLayout" >Layout</name> <section toc="exclude" anchor="OP_LAYOUTCOMMIT_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ union newtime4 switch (bool nt_timechanged) { case TRUE: nfstime4 nt_time; case FALSE: void; }; union newoffset4 switch (bool no_newoffset) { case TRUE: offset4 no_offset; case FALSE: void; }; struct LAYOUTCOMMIT4args { /* CURRENT_FH: file */ offset4 loca_offset; length4 loca_length; bool loca_reclaim; stateid4 loca_stateid; newoffset4 loca_last_write_offset; newtime4 loca_time_modify; layoutupdate4 loca_layoutupdate;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LAYOUTCOMMIT_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ union newsize4 switch (bool ns_sizechanged) { case TRUE: length4 ns_size; case FALSE: void; }; struct LAYOUTCOMMIT4resok { newsize4 locr_newsize; }; union LAYOUTCOMMIT4res switch (nfsstat4 locr_status) { case NFS4_OK: LAYOUTCOMMIT4resok locr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LAYOUTCOMMIT_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LAYOUTCOMMIT operation commits changes in the layout represented by the current filehandle, client ID (derived from the session ID in the preceding SEQUENCE operation), byte-range, and stateid. Since layouts are sub-dividable, a smaller portion of a layout, retrieved via LAYOUTGET, can be committed. The byte-range being committed is specified through the byte-range (loca_offset and loca_length). This byte-rangeMUST<bcp14>MUST</bcp14> overlap with one or more existing layouts previously granted via LAYOUTGET (<xreftarget="OP_LAYOUTGET"/>),target="OP_LAYOUTGET" format="default"/>), each with an iomode of LAYOUTIOMODE4_RW. In the case where the iomode of any held layout segment is not LAYOUTIOMODE4_RW, the server should return the error NFS4ERR_BAD_IOMODE. For the case where the client does not hold matching layout segment(s) for the defined byte-range, the server should return the error NFS4ERR_BAD_LAYOUT. </t> <t> The LAYOUTCOMMIT operation indicates that the client has completed writes using a layout obtained by a previous LAYOUTGET. The client may have only written a subset of the data range it previously requested. LAYOUTCOMMIT allows it to commit or discard provisionally allocated space and to update the server with a new end-of-file. The layout referenced by LAYOUTCOMMIT is still valid after the operation completes and can be continued to be referenced by the client ID, filehandle, byte-range, layout type, and stateid. </t> <t> If the loca_reclaim field is set to TRUE, this indicates that the client is attempting to commit changes to a layout after the restart of the metadata server during the metadata server's recovery grace period (see <xreftarget="mds_recovery"/>).target="mds_recovery" format="default"/>). This type of request may be necessary when the client has uncommitted writes to provisionally allocated byte-ranges of a file that were sent to the storage devices before the restart of the metadata server. In this case, the layout provided by the clientMUST<bcp14>MUST</bcp14> be a subset of a writable layout that the client held immediately before the restart of the metadata server. The value of the field loca_stateidMUST<bcp14>MUST</bcp14> be a value that the metadata server returned before it restarted. The metadata server is free to accept or reject this request based on its own internal metadata consistency checks. If the metadata server finds that the layout provided by the client does not pass its consistency checks, itMUST<bcp14>MUST</bcp14> reject the request with the status NFS4ERR_RECLAIM_BAD. The successful completion of the LAYOUTCOMMIT request with loca_reclaim set to TRUE does NOT provide the client with a layout for the file. It simply commits the changes to the layout specified in the loca_layoutupdate field. To obtain a layout for the file, the client must send a LAYOUTGET request to the server after the server's grace period has expired. If the metadata server receives a LAYOUTCOMMIT request with loca_reclaim set to TRUE when the metadata server is not in its recovery grace period, itMUST<bcp14>MUST</bcp14> reject the request with the status NFS4ERR_NO_GRACE. </t> <t> Setting the loca_reclaim field to TRUE is required if and only if the committed layout was acquired before the metadata server restart. If the client is committing a layout that was acquired during the metadata server's grace period, itMUST<bcp14>MUST</bcp14> set the "reclaim" field to FALSE. </t> <t> The loca_stateid is a layout stateid value as returned by previously successful layout operations (see <xreftarget="layout_stateid"/>).target="layout_stateid" format="default"/>). </t> <t> The loca_last_write_offset field specifies the offset of the last byte written by the client previous to the LAYOUTCOMMIT. Note that this value is never equal to the file's size (at most it is one byte less than the file's size) andMUST<bcp14>MUST</bcp14> be less than or equal to NFS4_MAXFILEOFF. Also, loca_last_write_offsetMUST<bcp14>MUST</bcp14> overlap the range described by loca_offset and loca_length. The metadata server may use this information to determine whether the file's size needs to be updated. If the metadata server updates the file's size as the result of the LAYOUTCOMMIT operation, it must return the new size (locr_newsize.ns_size) as part of the results. </t> <t> The loca_time_modify field allows the client to suggest a modification time it would like the metadata server to set. The metadata server may use the suggestion or it may use the time of the LAYOUTCOMMIT operation to set the modification time. If the metadata server uses the client-provided modification time, it should ensure that time does not flow backwards. If the client wants to force the metadata server to set an exact time, the client should use a SETATTR operation in a COMPOUND right after LAYOUTCOMMIT. See <xref target="committing_layout"/>format="default"/> for more details. If the client desires the resultant modification time, it should construct the COMPOUND so that a GETATTR follows the LAYOUTCOMMIT. </t> <t> The loca_layoutupdate argument to LAYOUTCOMMIT provides a mechanism for a client to provide layout-specific updates to the metadata server. For example, the layout update can describe what byte-ranges of the original layout have been used and what byte-ranges can be deallocated. There is no NFSv4.1 file layout-specific layoutupdate4 structure. </t> <t> The layout information is more verbose for block devices than for objects and files because the latter two hide the details of block allocation behind their storage protocols. At the minimum, the client needs to communicate changes to the end-of-file location back to the server, and, if desired, its view of the file's modification time. For block/volume layouts, it needs to specify precisely which blocks have been used. </t> <t> If the layout identified in the arguments does not exist, the error NFS4ERR_BADLAYOUT is returned. The layout being committed may also be rejected if it does not correspond to an existing layout with an iomode of LAYOUTIOMODE4_RW. </t> <t> On success, the current filehandle retains its value and the current stateid retains its value. </t> </section> <section toc="exclude" anchor="OP_LAYOUTCOMMIT_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The clientMAY<bcp14>MAY</bcp14> also use LAYOUTCOMMIT with the loca_reclaim field set to TRUE to convey hints to modified file attributes or to report layout-type specific information such as I/O errors for object-based storage layouts, as normally done during normal operation. Doing so may help the metadata server to recover files more efficiently after restart. For example, some file system implementations may require expansive recovery of file system objects if the metadata server does not get a positive indication from all clients holding a LAYOUTIOMODE4_RW layout that they have successfully completed all their writes. Sending a LAYOUTCOMMIT (if required) and then following with LAYOUTRETURN can provide such an indication and allow for graceful and efficient recovery. </t> <t> If loca_reclaim is TRUE, the metadata server is free to either examine or ignore the value in the field loca_stateid. The metadata server implementation might or might not encode in its layout stateid information that allows themetadatemetadata server to perform a consistency check on the LAYOUTCOMMIT request. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LAYOUTGET"title="Operationnumbered="true" toc="default"> <name>Operation 50: LAYOUTGET - Get LayoutInformation" >Information</name> <section toc="exclude" anchor="OP_LAYOUTGET_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct LAYOUTGET4args { /* CURRENT_FH: file */ bool loga_signal_layout_avail; layouttype4 loga_layout_type; layoutiomode4 loga_iomode; offset4 loga_offset; length4 loga_length; length4 loga_minlength; stateid4 loga_stateid; count4 loga_maxcount;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LAYOUTGET_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct LAYOUTGET4resok { bool logr_return_on_close; stateid4 logr_stateid; layout4logr_layout<>;logr_layout<>; }; union LAYOUTGET4res switch (nfsstat4 logr_status) { case NFS4_OK: LAYOUTGET4resok logr_resok4; case NFS4ERR_LAYOUTTRYLATER: bool logr_will_signal_layout_avail; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LAYOUTGET_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The LAYOUTGET operation requests a layout from the metadata server for reading or writing the file given by the filehandle at the byte-range specified by offset and length. Layouts are identified by the client ID (derived from the session ID in the preceding SEQUENCE operation), current filehandle, layout type (loga_layout_type), and the layout stateid (loga_stateid). The use of the loga_iomode field depends upon the layout type, but should reflect the client's data access intent. </t> <t> If the metadata server is in a grace period, and does not persist layouts and device ID to device address mappings, then itMUST<bcp14>MUST</bcp14> return NFS4ERR_GRACE (see <xreftarget="reclaim_locks"/>).target="reclaim_locks" format="default"/>). </t> <t> The LAYOUTGET operation returns layout information for the specified byte-range: a layout. The client actually specifies two ranges, both starting at the offset in the loga_offset field. The first range is between loga_offset and loga_offset + loga_length - 1 inclusive. This range indicates the desired range the client wants the layout to cover. The second range is between loga_offset and loga_offset + loga_minlength - 1 inclusive. This range indicates the required range the client needs the layout to cover. Thus, loga_minlengthMUST<bcp14>MUST</bcp14> be less than or equal to loga_length. </t> <t> When a length field is set to NFS4_UINT64_MAX, this indicates a desire (when loga_length is NFS4_UINT64_MAX) or requirement (when loga_minlength is NFS4_UINT64_MAX) to get a layout from loga_offset through the end-of-file, regardless of the file's length. </t> <t> The following rules govern the relationships among, and the minima of, loga_length, loga_minlength, and loga_offset.<list style='symbols'> <t></t> <ul spacing="normal"> <li> If loga_length is less than loga_minlength, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL.</t> <t></li> <li> If loga_minlength is zero, this is an indication to the metadata server that the client desires any layout at offset loga_offset or less that the metadata server has "readily available". Readily is subjective, and depends on the layout type and the pNFS server implementation. For example, some metadata servers might have to pre-allocate stable storage when they receive a request for a range of a file that goes beyond the file's current length. If loga_minlength is zero and loga_length is greater than zero, this tells the metadata server what range of the layout the client would prefer to have. If loga_length and loga_minlength are both zero, then the client is indicating that it desires a layout of any length with the ending offset of the range no less than the value specified loga_offset, and the starting offset at or below loga_offset. If the metadata server does not have a layout that is readily available, then itMUST<bcp14>MUST</bcp14> return NFS4ERR_LAYOUTTRYLATER.</t> <t></li> <li> If the sum of loga_offset and loga_minlength exceeds NFS4_UINT64_MAX, and loga_minlength is not NFS4_UINT64_MAX, the error NFS4ERR_INVALMUST<bcp14>MUST</bcp14> result.</t> <t></li> <li> If the sum of loga_offset and loga_length exceeds NFS4_UINT64_MAX, and loga_length is not NFS4_UINT64_MAX, the error NFS4ERR_INVALMUST<bcp14>MUST</bcp14> result.</t> </list></li> </ul> <t> After the metadata server has performed the above checks on loga_offset, loga_minlength, and loga_offset, the metadata serverMUST<bcp14>MUST</bcp14> return a layout according to the rules in <xreftarget="layout_hell"/>.target="layout_hell" format="default"/>. </t><texttable anchor='layout_hell'> <preamble><t> Acceptable layouts based on loga_minlength. Note: u64m = NFS4_UINT64_MAX; a_off = loga_offset; a_minlen = loga_minlength.</preamble> <ttcol>Layout</t> <table anchor="layout_hell" align="center"> <thead> <tr> <th align="left">Layout iomode ofrequest</ttcol> <ttcol>Layoutrequest</th> <th align="left">Layout a_minlen ofrequest</ttcol> <ttcol>Layoutrequest</th> <th align="left">Layout iomode ofreply</ttcol> <ttcol>Layoutreply</th> <th align="left">Layout offset ofreply</ttcol> <ttcol>Layoutreply</th> <th align="left">Layout length ofreply</ttcol> <c>_READ</c> <c>u64m</c> <c>MAY be _READ</c> <c>MUSTreply</th> </tr> </thead> <tbody> <tr> <td align="left">_READ</td> <td align="left">u64m</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUSTa_off</td> <td align="left"><bcp14>MUST</bcp14> be>=>= file length - layoutoffset</c> <c>_READ</c> <c>u64m</c> <c>MAY be _RW</c> <c>MUSToffset</td> </tr> <tr> <td align="left">_READ</td> <td align="left">u64m</td> <td align="left"><bcp14>MAY</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUST be u64m</c> <c>_READ</c> <c>>a_off</td> <td align="left"><bcp14>MUST</bcp14> be u64m</td> </tr> <tr> <td align="left">_READ</td> <td align="left">> 0 and <u64m</c> <c>MAY be _READ</c> <c>MUSTu64m</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUSTa_off</td> <td align="left"><bcp14>MUST</bcp14> be>=>= MIN(file length, a_minlen + a_off) - layoutoffset</c> <c>_READ</c> <c>>offset</td> </tr> <tr> <td align="left">_READ</td> <td align="left">> 0 and <u64m</c> <c>MAY be _RW</c> <c>MUSTu64m</td> <td align="left"><bcp14>MAY</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUSTa_off</td> <td align="left"><bcp14>MUST</bcp14> be>=>= a_off - layout offset +a_minlen</c> <c>_READ</c> <c>0</c> <c>MAY be _READ</c> <c>MUSTa_minlen</td> </tr> <tr> <td align="left">_READ</td> <td align="left">0</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUST be > 0</c> <c>_READ</c> <c>0</c> <c>MAY be _RW</c> <c>MUSTa_off</td> <td align="left"><bcp14>MUST</bcp14> be > 0</td> </tr> <tr> <td align="left">_READ</td> <td align="left">0</td> <td align="left"><bcp14>MAY</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUST be > 0</c> <c>_RW</c> <c>u64m</c> <c>MUST be _RW</c> <c>MUSTa_off</td> <td align="left"><bcp14>MUST</bcp14> be > 0</td> </tr> <tr> <td align="left">_RW</td> <td align="left">u64m</td> <td align="left"><bcp14>MUST</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUST be u64m</c> <c>_RW</c> <c>>a_off</td> <td align="left"><bcp14>MUST</bcp14> be u64m</td> </tr> <tr> <td align="left">_RW</td> <td align="left">> 0 and <u64m</c> <c>MUST be _RW</c> <c>MUSTu64m</td> <td align="left"><bcp14>MUST</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUSTa_off</td> <td align="left"><bcp14>MUST</bcp14> be>=>= a_off - layout offset +a_minlen</c> <c>_RW</c> <c>0</c> <c>MUST be _RW</c> <c>MUSTa_minlen</td> </tr> <tr> <td align="left">_RW</td> <td align="left">0</td> <td align="left"><bcp14>MUST</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>MUST be > 0</c> </texttable>a_off</td> <td align="left"><bcp14>MUST</bcp14> be > 0</td> </tr> </tbody> </table> <t> If loga_minlength is not zero and the metadata server cannot return a layout according to the rules in <xreftarget="layout_hell"/>,target="layout_hell" format="default"/>, then the metadata serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_BADLAYOUT. If loga_minlength is zero and the metadata server cannot or will not return a layout according to the rules in <xreftarget="layout_hell"/>,target="layout_hell" format="default"/>, then the metadata serverMUST<bcp14>MUST</bcp14> return the error NFS4ERR_LAYOUTTRYLATER. Assuming that loga_length is greater than loga_minlength or equal to zero, the metadata serverSHOULD<bcp14>SHOULD</bcp14> return a layout according to the rules in <xreftarget="layout_hell2"/>.target="layout_hell2" format="default"/>. </t><texttable anchor='layout_hell2'> <preamble><t> Desired layouts based on loga_length. The rules of <xreftarget='layout_hell'/> MUSTtarget="layout_hell" format="default"/> <bcp14>MUST</bcp14> be applied first. Note: u64m = NFS4_UINT64_MAX; a_off = loga_offset; a_len = loga_length.</preamble> <ttcol>Layout</t> <table anchor="layout_hell2" align="center"> <thead> <tr> <th align="left">Layout iomode ofrequest</ttcol> <ttcol>Layoutrequest</th> <th align="left">Layout a_len ofrequest</ttcol> <ttcol>Layoutrequest</th> <th align="left">Layout iomode ofreply</ttcol> <ttcol>Layoutreply</th> <th align="left">Layout offset ofreply</ttcol> <ttcol>Layoutreply</th> <th align="left">Layout length ofreply</ttcol> <c>_READ</c> <c>u64m</c> <c>MAY be _READ</c> <c>MUSTreply</th> </tr> </thead> <tbody> <tr> <td align="left">_READ</td> <td align="left">u64m</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULD be u64m</c> <c>_READ</c> <c>u64m</c> <c>MAY be _RW</c> <c>MUSTa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be u64m</td> </tr> <tr> <td align="left">_READ</td> <td align="left">u64m</td> <td align="left"><bcp14>MAY</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULD be u64m</c> <c>_READ</c> <c>>a_off</td> <td align="left"><bcp14>SHOULD</bcp14> be u64m</td> </tr> <tr> <td align="left">_READ</td> <td align="left">> 0 and <u64m</c> <c>MAY be _READ</c> <c>MUSTu64m</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULDa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be>=>= a_off - layout offset +a_len</c> <c>_READ</c> <c>>a_len</td> </tr> <tr> <td align="left">_READ</td> <td align="left">> 0 and <u64m</c> <c>MAY be _RW</c> <c>MUSTu64m</td> <td align="left"><bcp14>MAY</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULDa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be>=>= a_off - layout offset +a_len</c> <c>_READ</c> <c>0</c> <c>MAY be _READ</c> <c>MUSTa_len</td> </tr> <tr> <td align="left">_READ</td> <td align="left">0</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULDa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be>> a_off - layoutoffset</c> <c>_READ</c> <c>0</c> <c>MAY be _READ</c> <c>MUSToffset</td> </tr> <tr> <td align="left">_READ</td> <td align="left">0</td> <td align="left"><bcp14>MAY</bcp14> be _READ</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULDa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be>> a_off - layoutoffset</c> <c>_RW</c> <c>u64m</c> <c>MUST be _RW</c> <c>MUSToffset</td> </tr> <tr> <td align="left">_RW</td> <td align="left">u64m</td> <td align="left"><bcp14>MUST</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULD be u64m</c> <c>_RW</c> <c>>a_off</td> <td align="left"><bcp14>SHOULD</bcp14> be u64m</td> </tr> <tr> <td align="left">_RW</td> <td align="left">> 0 and <u64m</c> <c>MUST be _RW</c> <c>MUSTu64m</td> <td align="left"><bcp14>MUST</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULDa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be>=>= a_off - layout offset +a_len</c> <c>_RW</c> <c>0</c> <c>MUST be _RW</c> <c>MUSTa_len</td> </tr> <tr> <td align="left">_RW</td> <td align="left">0</td> <td align="left"><bcp14>MUST</bcp14> be _RW</td> <td align="left"><bcp14>MUST</bcp14> be <=a_off</c> <c>SHOULDa_off</td> <td align="left"><bcp14>SHOULD</bcp14> be>> a_off - layoutoffset</c> </texttable>offset</td> </tr> </tbody> </table> <t> The loga_stateid field specifies a valid stateid. If a layout is not currently held by the client, the loga_stateid field represents a stateid reflecting the correspondingly valid open, byte-range lock, or delegation stateid. Once a layout is held on the file by the client, the loga_stateid fieldMUST<bcp14>MUST</bcp14> be a stateid as returned from a previous LAYOUTGET or LAYOUTRETURN operation or provided by a CB_LAYOUTRECALL operation (see <xreftarget="layout_stateid"/>).target="layout_stateid" format="default"/>). </t> <t> The loga_maxcount field specifies the maximum layout size (in bytes) that the client can handle. If the size of the layout structure exceeds the size specified by maxcount, the metadata server will return the NFS4ERR_TOOSMALL error. </t> <t> The returned layout is expressed as an array, logr_layout, with each element of type layout4. If a file has a single striping pattern, then logr_layoutSHOULD<bcp14>SHOULD</bcp14> contain just one entry. Otherwise, if the requested range overlaps more than one striping pattern, logr_layout will contain the required number of entries. The elements of logr_layoutMUST<bcp14>MUST</bcp14> be sorted in ascending order of the value of the lo_offset field of each element. ThereMUST<bcp14>MUST</bcp14> be no gaps or overlaps in the range between two successive elements of logr_layout. The lo_iomode field in each element of logr_layoutMUST<bcp14>MUST</bcp14> be the same. </t> <t> <xref target="layout_hell"/>format="default"/> and <xref target="layout_hell2"/>format="default"/> both refer to a returned layout iomode, offset, and length. Because the returned layout is encoded in the logr_layout array, more description is required.<list style='hanging'> <t hangText='iomode'/> <t></t> <dl newline="false" spacing="normal"> <dt>iomode</dt> <dd> The value of the returned layout iomode listed in <xref target="layout_hell"/>format="default"/> and <xref target="layout_hell2"/>format="default"/> is equal to the value of the lo_iomode field in each element of logr_layout. As shown in <xref target="layout_hell"/>format="default"/> and <xref target="layout_hell2"/>,format="default"/>, the metadata serverMAY<bcp14>MAY</bcp14> return a layout with an lo_iomode different from the requested iomode (field loga_iomode of the request). If it does so, itMUST<bcp14>MUST</bcp14> ensure that the lo_iomode is more permissive than the loga_iomode requested. For example, this behavior allows an implementation to upgrade LAYOUTIOMODE4_READ requests to LAYOUTIOMODE4_RW requests at its discretion, within the limits of the layout type specific protocol. A lo_iomode of either LAYOUTIOMODE4_READ or LAYOUTIOMODE4_RWMUST<bcp14>MUST</bcp14> be returned.</t> <t hangText='offset'/> <t></dd> <dt>offset</dt> <dd> The value of the returned layout offset listed in <xref target="layout_hell"/>format="default"/> and <xref target="layout_hell2"/>format="default"/> is always equal to the lo_offset field of the first element logr_layout.</t> <t hangText='length'/></dd> <dt>length</dt> <dd> <t> When setting the value of the returned layout length, the situation is complicated by the possibility that the special layout length value NFS4_UINT64_MAX is involved. For a logr_layout array of N elements, the lo_length field in the first N-1 elementsMUST NOT<bcp14>MUST NOT</bcp14> be NFS4_UINT64_MAX. The lo_length field of the last element of logr_layout can be NFS4_UINT64_MAX under some conditions as described in the following list.<list style='symbols'> <t></t> <ul spacing="normal"> <li> If an applicable rule of <xreftarget="layout_hell"/>target="layout_hell" format="default"/> states that the metadata serverMUST<bcp14>MUST</bcp14> return a layout of length NFS4_UINT64_MAX, then the lo_length field of the last element of logr_layoutMUST<bcp14>MUST</bcp14> be NFS4_UINT64_MAX.</t> <t></li> <li> If an applicable rule of <xreftarget="layout_hell"/>target="layout_hell" format="default"/> states that the metadata serverMUST NOT<bcp14>MUST NOT</bcp14> return a layout of length NFS4_UINT64_MAX, then the lo_length field of the last element of logr_layoutMUST NOT<bcp14>MUST NOT</bcp14> be NFS4_UINT64_MAX.</t> <t></li> <li> If an applicable rule of <xreftarget="layout_hell2"/>target="layout_hell2" format="default"/> states that the metadata serverSHOULD<bcp14>SHOULD</bcp14> return a layout of length NFS4_UINT64_MAX, then the lo_length field of the last element of logr_layoutSHOULD<bcp14>SHOULD</bcp14> be NFS4_UINT64_MAX.</t> <t></li> <li> When the value of the returned layout length of <xref target="layout_hell"/>format="default"/> and <xref target="layout_hell2"/>format="default"/> is not NFS4_UINT64_MAX, then the returned layout length is equal to the sum of the lo_length fields of each element of logr_layout.</t> </list> </t> </list> </t></li> </ul> </dd> </dl> <t> The logr_return_on_close result field is a directive to return the layout before closing the file. When the metadata server sets this return value to TRUE, itMUST<bcp14>MUST</bcp14> be prepared to recall the layout in the case in which the client fails to return the layout before close. For the metadata server that knows a layout must be returned before a close of the file, this return value can be used to communicate the desired behavior to the client and thus remove one extra step from the client's and metadata server's interaction. </t> <t> The logr_stateid stateid is returned to the client for use in subsequent layout related operations. See Sections <xref target="stateid"format="counter" />,format="counter"/>, <xref target="layout_stateid"format="counter" />,format="counter"/>, and <xref target="pnfs_operation_sequencing"format="counter" />format="counter"/> for a further discussion and requirements. </t> <t> The format of the returned layout (lo_content) is specific to the layout type. The value of the layout type (lo_content.loc_type) for each of the elements of the array of layouts returned by the metadata server (logr_layout)MUST<bcp14>MUST</bcp14> be equal to the loga_layout_type specified by the client. If it is not equal, the clientSHOULD<bcp14>SHOULD</bcp14> ignore the response as invalid and behave as if the metadata server returned an error, even if the client does have support for the layout type returned. </t> <t> If neither the requested file nor its containing file system support layouts, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_LAYOUTUNAVAILABLE. If the layout type is not supported, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_UNKNOWN_LAYOUTTYPE. If layouts are supported but no layout matches the client provided layout identification, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_BADLAYOUT. If an invalid loga_iomode is specified, or a loga_iomode of LAYOUTIOMODE4_ANY is specified, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_BADIOMODE. </t> <t> If the layout for the file is unavailable due to transient conditions, e.g., file sharing prohibits layouts, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_LAYOUTTRYLATER. </t> <t> If the layout request is rejected due to an overlapping layout recall, the metadata serverMUST<bcp14>MUST</bcp14> return NFS4ERR_RECALLCONFLICT. See <xreftarget="pnfs_operation_sequencing"/>target="pnfs_operation_sequencing" format="default"/> for details. </t> <t> If the layout conflicts with a mandatory byte-range lock held on the file, and if the storage devices have no method of enforcing mandatory locks, other than through the restriction of layouts, the metadata serverSHOULD<bcp14>SHOULD</bcp14> return NFS4ERR_LOCKED. </t> <t> If client sets loga_signal_layout_avail to TRUE, then it is registering with the client a "want" for a layout in the event the layout cannot be obtained due to resource exhaustion. If the metadata server supports and will honor the "want", the results will have logr_will_signal_layout_avail set to TRUE. If so, the client should expect a CB_RECALLABLE_OBJ_AVAIL operation to indicate that a layout is available. </t> <t> On success, the current filehandle retains its value and the current stateid is updated to match the value as returned in the results. </t> </section> <section toc="exclude" anchor="OP_LAYOUTGET_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> Typically, LAYOUTGET will be called as part of a COMPOUND request after an OPEN operation and results in the client having location information for the file. This requires that loga_stateid be set to the special stateid that tells the metadata server to use the current stateid, which is set by OPEN (see <xreftarget="current_stateid"/>).target="current_stateid" format="default"/>). A client may also hold a layout across multiple OPENs. The client specifies a layout type that limits what kind of layout the metadata server will return. This prevents metadata servers from granting layouts that are unusable by the client. </t> <t> As indicated by <xref target="layout_hell"/>format="default"/> and <xref target="layout_hell2"/>,format="default"/>, the specification of LAYOUTGET allows a pNFS client and server considerable flexibility. A pNFS client can take several strategies for sending LAYOUTGET. Some examples are as follows.<list style='symbols'> <t></t> <ul spacing="normal"> <li> If LAYOUTGET is preceded by OPEN in the same COMPOUND request and the OPEN requests OPEN4_SHARE_ACCESS_READ access, the client might opt to request a _READ layout with loga_offset set to zero, loga_minlength set to zero, and loga_length set to NFS4_UINT64_MAX. If the file has space allocated to it, that space is striped over one or more storage devices, and there is either no conflicting layout or the concept of a conflicting layout does not apply to the pNFS server's layout type or implementation, then the metadata server might return a layout with a starting offset of zero, and a length equal to the length of the file, if not NFS4_UINT64_MAX. If the length of the file is not a multiple of the pNFS server's stripe width (see <xreftarget="file_layout_definitions"/>target="file_layout_definitions" format="default"/> for a formal definition), the metadata server might round up the returned layout's length.</t> <t></li> <li> If LAYOUTGET is preceded by OPEN in the same COMPOUND request, and the OPEN requests OPEN4_SHARE_ACCESS_WRITE access and does not truncate the file, the client might opt to request a _RW layout with loga_offset set to zero, loga_minlength set to zero, and loga_length set to the file's current length (if known), or NFS4_UINT64_MAX. As with the previous case, under some conditions the metadata server might return a layout that covers the entire length of the file or beyond.</t> <t></li> <li> This strategy is as above, but the OPEN truncates the file. In this case, the client might anticipate it will be writing to the file from offset zero, and so loga_offset and loga_minlength are set to zero, and loga_length is set to the value of threshold4_write_iosize. The metadata server might return a layout from offset zero with a length at least as long as threshold4_write_iosize.</t> <t></li> <li> A process on the client invokes a request to read from offset 10000 for length 50000. The client is using buffered I/O, and has buffer sizes of 4096 bytes. The client intends to map the request of the process into a series of READ requests starting at offset 8192. The end offset needs to be higher than 10000 + 50000 = 60000, and the next offset that is a multiple of 4096 is 61440. The difference between 61440 and that starting offset of the layout is 53248 (which is the product of 4096 and 15). The value of threshold4_read_iosize is less than 53248, so the client sends a LAYOUTGET request with loga_offset set to 8192, loga_minlength set to 53248, and loga_length set to the file's length (if known) minus 8192 or NFS4_UINT64_MAX (if the file's length is not known). Since this LAYOUTGET request exceeds the metadata server's threshold, it grants the layout, possibly with an initial offset of zero, with an end offset of at least 8192 + 53248 - 1 = 61439, but preferably a layout with an offset aligned on the stripe width and a length that is a multiple of the stripe width.</t> <t></li> <li> This strategy is as above, but the client is not using buffered I/O, and instead all internal I/O requests are sent directly to the server. The LAYOUTGET request has loga_offset equal to 10000 and loga_minlength set to 50000. The value of loga_length is set to the length of the file. The metadata server is free to return a layout that fully overlaps the requested range, with a starting offset and length aligned on the stripe width.</t> <t></li> <li> Again, a process on the client invokes a request to read from offset 10000 for length 50000 (i.e. a range with a starting offset of 10000 and an ending offset of 69999), and buffered I/O is in use. The client is expecting that the server might not be able to return the layout for the full I/O range. The client intends to map the request of the process into a series of thirteen READ requests starting at offset 8192, each with length 4096, with a total length of 53248 (which equals 13 * 4096), which fully contains the range that client's process wants to read. Because the value of threshold4_read_iosize is equal to 4096, it is practical and reasonable for the client to use several LAYOUTGET operations to complete the series of READs. The client sends a LAYOUTGET request with loga_offset set to 8192, loga_minlength set to 4096, and loga_length set to 53248 or higher. The server will grant a layout possibly with an initial offset of zero, with an end offset of at least 8192 + 4096 - 1 = 12287, but preferably a layout with an offset aligned on the stripe width and a length that is a multiple of the stripe width. This will allow the client to make forward progress, possibly sending more LAYOUTGET operations for the remainder of the range.</t> <t></li> <li> An NFS client detects a sequential read pattern, and so sends a LAYOUTGET operation that goes well beyond any current or pending read requests to the server. The server might likewise detect this pattern, and grant the LAYOUTGET request. Once the client reads from an offset of the file that represents 50% of the way through the range of the last layout it received, in order to avoid stalling I/O that would wait for a layout, the client sends more operations from an offset of the file that represents 50% of the way through the last layout it received. The client continues to request layouts with byte-ranges that are well in advance of the byte-ranges of recent and/or read requests of processes running on the client.</t> <t></li> <li> This strategy is as above, but the client fails to detect the pattern, but the server does. The next time the metadata server gets a LAYOUTGET, it returns a layout with a length that is well beyond loga_minlength.</t> <t></li> <li> A client is using buffered I/O, and has a long queue of write-behinds to process and also detects a sequential write pattern. It sends a LAYOUTGET for a layout that spans the range of the queued write-behinds and well beyond, including ranges beyond the filer's current length. The client continues to send LAYOUTGET operations once the write-behind queue reaches 50% of the maximum queue length.</t> </list> </t></li> </ul> <t> Once the client has obtained a layout referring to a particular device ID, the metadata serverMUST NOT<bcp14>MUST NOT</bcp14> delete the device ID until the layout is returned or revoked. </t> <t> CB_NOTIFY_DEVICEID can race with LAYOUTGET. One race scenario is that LAYOUTGET returns a device ID for which the client does not have device address mappings, and the metadata server sends a CB_NOTIFY_DEVICEID to add the device ID to the client's awareness and meanwhile the client sends GETDEVICEINFO on the device ID. This scenario is discussed in <xreftarget="OP_GETDEVICEINFO_IMPLEMENTATION"/>.target="OP_GETDEVICEINFO_IMPLEMENTATION" format="default"/>. Another scenario is that the CB_NOTIFY_DEVICEID is processed by the client before it processes the results from LAYOUTGET. The client will send a GETDEVICEINFO on the device ID. If the results from GETDEVICEINFO are received before the client gets results from LAYOUTGET, then there is no longer a race. If the results from LAYOUTGET are received before the results from GETDEVICEINFO, the client can either wait for results of GETDEVICEINFO or send another one to get possibly more up-to-date device address mappings for the device ID. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_LAYOUTRETURN"title="Operationnumbered="true" toc="default"> <name>Operation 51: LAYOUTRETURN - Release LayoutInformation" >Information</name> <section toc="exclude" anchor="OP_LAYOUTRETURN_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ /* Constants used for LAYOUTRETURN and CB_LAYOUTRECALL */ const LAYOUT4_RET_REC_FILE = 1; const LAYOUT4_RET_REC_FSID = 2; const LAYOUT4_RET_REC_ALL = 3; enum layoutreturn_type4 { LAYOUTRETURN4_FILE = LAYOUT4_RET_REC_FILE, LAYOUTRETURN4_FSID = LAYOUT4_RET_REC_FSID, LAYOUTRETURN4_ALL = LAYOUT4_RET_REC_ALL }; struct layoutreturn_file4 { offset4 lrf_offset; length4 lrf_length; stateid4 lrf_stateid; /* layouttype4 specific data */ opaquelrf_body<>;lrf_body<>; }; union layoutreturn4 switch(layoutreturn_type4 lr_returntype) { case LAYOUTRETURN4_FILE: layoutreturn_file4 lr_layout; default: void; };</artwork> </figure> <figure> <artwork>struct LAYOUTRETURN4args { /* CURRENT_FH: file */ bool lora_reclaim; layouttype4 lora_layout_type; layoutiomode4 lora_iomode; layoutreturn4 lora_layoutreturn;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LAYOUTRETURN_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ union layoutreturn_stateid switch (bool lrs_present) { case TRUE: stateid4 lrs_stateid; case FALSE: void; }; union LAYOUTRETURN4res switch (nfsstat4 lorr_status) { case NFS4_OK: layoutreturn_stateid lorr_stateid; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_LAYOUTRETURN_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation returns from the client to the server one or more layouts represented by the client ID (derived from the session ID in the preceding SEQUENCE operation), lora_layout_type, and lora_iomode. When lr_returntype is LAYOUTRETURN4_FILE, the returned layout is further identified by the current filehandle, lrf_offset, lrf_length, and lrf_stateid. If the lrf_length field is NFS4_UINT64_MAX, all bytes of the layout, starting at lrf_offset, are returned. When lr_returntype is LAYOUTRETURN4_FSID, the current filehandle is used to identify the file system and all layouts matching the client ID, the fsid of the file system, lora_layout_type, and lora_iomode are returned. When lr_returntype is LAYOUTRETURN4_ALL, all layouts matching the client ID, lora_layout_type, and lora_iomode are returned and the current filehandle is not used. After this call, the clientMUST NOT<bcp14>MUST NOT</bcp14> use the returned layout(s) and the associated storage protocol to access the file data. </t> <t> If the set of layouts designated in the case of LAYOUTRETURN4_FSID or LAYOUTRETURN4_ALL is empty, then no error results. In the case of LAYOUTRETURN4_FILE, the byte-range specified is returned even if it is a subdivision of a layout previously obtained with LAYOUTGET, a combination of multiple layouts previously obtained with LAYOUTGET, or a combination including some layouts previously obtained with LAYOUTGET, and one or more subdivisions of such layouts. When the byte-range does not designate any bytes for which a layout is held for the specified file, client ID, layout type and mode, no error results. See <xref target="bulk_layouts"/>format="default"/> for considerations with "bulk" return of layouts. </t> <t> The layout being returned may be a subset or superset of a layout specified by CB_LAYOUTRECALL. However, if it is a subset, the recall is not complete until the full recalled scope has been returned. Recalled scope refers to the byte-range in the case of LAYOUTRETURN4_FILE, the use of LAYOUTRETURN4_FSID, or the use of LAYOUTRETURN4_ALL. There must be a LAYOUTRETURN with a matching scope to complete the return even if all current layout ranges have been previously individually returned. </t> <t> For all lr_returntype values, an iomode of LAYOUTIOMODE4_ANY specifies that all layouts that match the other arguments to LAYOUTRETURN (i.e., client ID, lora_layout_type, and one of current filehandle and range; fsid derived from current filehandle; or LAYOUTRETURN4_ALL) are being returned. </t> <t> In the case that lr_returntype is LAYOUTRETURN4_FILE, the lrf_stateid provided by the client is a layout stateid as returned from previous layout operations. Note that the "seqid" field of lrf_stateidMUST NOT<bcp14>MUST NOT</bcp14> be zero. See Sections <xref target="stateid"format="counter" />,format="counter"/>, <xref target="layout_stateid"format="counter" />,format="counter"/>, and <xref target="pnfs_operation_sequencing"format="counter" />format="counter"/> for a further discussion and requirements. </t> <t> Return of a layout or all layouts does not invalidate the mapping of storage device ID to a storage device address. The mapping remains in effect until specifically changed or deleted via device ID notification callbacks. Of course if there are no remaining layouts that refer to a previously used device ID, the server is free to delete a device ID without a notification callback, which will be the case when notifications are not in effect. </t> <t> If the lora_reclaim field is set to TRUE, the client is attempting to return a layout that was acquired before the restart of the metadata server during the metadata server's grace period. When returning layouts that were acquired during the metadata server's grace period, the clientMUST<bcp14>MUST</bcp14> set the lora_reclaim field to FALSE. The lora_reclaim fieldMUST<bcp14>MUST</bcp14> be set to FALSE also when lr_layoutreturn is LAYOUTRETURN4_FSID or LAYOUTRETURN4_ALL. See <xreftarget="OP_LAYOUTCOMMIT">LAYOUTCOMMITtarget="OP_LAYOUTCOMMIT" format="default">LAYOUTCOMMIT </xref> for more details. </t> <t> Layouts may be returned when recalled or voluntarily (i.e., before the server has recalled them). In either case, the client must properly propagate state changed under the context of the layout to the storage device(s) or to the metadata server before returning the layout. </t> <t> If the client returns the layout in response to a CB_LAYOUTRECALL where the lor_recalltype field of the clora_recall field was LAYOUTRECALL4_FILE, the client should use the lor_stateid value from CB_LAYOUTRECALL as the value for lrf_stateid. Otherwise, it should use logr_stateid (from a previous LAYOUTGET result) or lorr_stateid (from a previous LAYRETURN result). This is done to indicate the point in time (in terms of layout stateid transitions) when the recall was sent. The client uses the precise lora_recallstateid value andMUST NOT<bcp14>MUST NOT</bcp14> set the stateid's seqid to zero; otherwise, NFS4ERR_BAD_STATEIDMUST<bcp14>MUST</bcp14> be returned. NFS4ERR_OLD_STATEID can be returned if the client is using an old seqid, and the server knows the client should not be using the old seqid. For example, the client uses the seqid on slot 1 of the session, receives the response with the new seqid, and uses the slot to send another request with the old seqid. </t> <t> If a client fails to return a layout in a timely manner, then the metadata serverSHOULD<bcp14>SHOULD</bcp14> use its control protocol with the storage devices to fence the client from accessing the data referenced by the layout. See <xref target="recalling_layout"/>format="default"/> for more details. </t> <t> If the LAYOUTRETURN request sets the lora_reclaim field to TRUE after the metadata server's grace period, NFS4ERR_NO_GRACE is returned. </t> <t> If the LAYOUTRETURN request sets the lora_reclaim field to TRUE and lr_returntype is set to LAYOUTRETURN4_FSID or LAYOUTRETURN4_ALL, NFS4ERR_INVAL is returned. </t> <t> If the client sets the lr_returntype field to LAYOUTRETURN4_FILE, then the lrs_stateid field will represent the layout stateid as updated for this operation's processing; the current stateid will also be updated to match the returned value. If the last byte of any layout for the current file, client ID, and layout type is being returned and there are no remaining pending CB_LAYOUTRECALL operations for which a LAYOUTRETURN operation must be done, lrs_presentMUST<bcp14>MUST</bcp14> be FALSE, and no stateid will be returned. In addition, the COMPOUND request's current stateid will be set to the all-zeroes special stateid (see <xreftarget="current_stateid"/>).target="current_stateid" format="default"/>). The serverMUST<bcp14>MUST</bcp14> reject with NFS4ERR_BAD_STATEID any further use of the current stateid in that COMPOUND until the current stateid is re-established by a later stateid-returning operation. </t> <t> On success, the current filehandle retains its value. </t> <t> If the EXCHGID4_FLAG_BIND_PRINC_STATEID capability is set on the client ID (see <xreftarget="OP_EXCHANGE_ID"/>),target="OP_EXCHANGE_ID" format="default"/>), the server will require that the principal, security flavor, and if applicable, the GSS mechanism, combination that acquired the layout also be the one to send LAYOUTRETURN. This might not be possible if credentials for the principal are no longer available. The server will allow the machine credential or SSV credential (see <xref target="OP_EXCHANGE_ID"/>)format="default"/>) to send LAYOUTRETURN if LAYOUTRETURN's operation code was set in the spo_must_allow result of EXCHANGE_ID. </t> </section> <section toc="exclude" anchor="OP_LAYOUTRETURN_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The final LAYOUTRETURN operation in response to a CB_LAYOUTRECALL callbackMUST<bcp14>MUST</bcp14> be serialized with any outstanding, intersecting LAYOUTRETURN operations. Note that it is possible that while a client is returning the layout for some recalled range, the server may recall a superset of that range (e.g., LAYOUTRECALL4_ALL); the final return operation for the latter must block until the former layout recall is done. </t> <t> Returning all layouts in a file system using LAYOUTRETURN4_FSID is typically done in response to a CB_LAYOUTRECALL for that file system as the final return operation. Similarly, LAYOUTRETURN4_ALL is used in response to a recall callback for all layouts. It is possible that the client already returned some outstanding layouts via individual LAYOUTRETURN calls and the call for LAYOUTRETURN4_FSID or LAYOUTRETURN4_ALL marks the end of the LAYOUTRETURN sequence. See <xref target="recall_robustness"/>format="default"/> for more details. </t> <t> Once the client has returned all layouts referring to a particular device ID, the serverMAY<bcp14>MAY</bcp14> delete the device ID. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Operationanchor="OP_SECINFO_NO_NAME" numbered="true" toc="default"> <name>Operation 52: SECINFO_NO_NAME - Get Security on UnnamedObject" anchor="OP_SECINFO_NO_NAME">Object</name> <section toc="exclude" anchor="OP_SECINFO_NO_NAME_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ enum secinfo_style4 { SECINFO_STYLE4_CURRENT_FH = 0, SECINFO_STYLE4_PARENT = 1 }; /* CURRENT_FH: object or child directory */ typedef secinfo_style4 SECINFO_NO_NAME4args;</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_SECINFO_NO_NAME_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ /* CURRENTFH: consumed if status is NFS4_OK */ typedef SECINFO4res SECINFO_NO_NAME4res;</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_SECINFO_NO_NAME_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> Like the SECINFO operation, SECINFO_NO_NAME is used by the client to obtain a list of valid RPC authentication flavors for a specific file object. Unlike SECINFO, SECINFO_NO_NAME only works with objects that are accessed by filehandle. </t> <t> There are two styles of SECINFO_NO_NAME, as determined by the value of the secinfo_style4 enumeration. If SECINFO_STYLE4_CURRENT_FH is passed, then SECINFO_NO_NAME is querying for the required security for the current filehandle. If SECINFO_STYLE4_PARENT is passed, then SECINFO_NO_NAME is querying for the required security of the current filehandle's parent. If the style selected is SECINFO_STYLE4_PARENT, then SECINFO should apply the same access methodology used for LOOKUPP when evaluating the traversal to the parent directory. Therefore, if the requester does not have the appropriate access to LOOKUPP the parent, then SECINFO_NO_NAME must behave the same way and return NFS4ERR_ACCESS. </t> <t> If PUTFH, PUTPUBFH, PUTROOTFH, or RESTOREFH returns NFS4ERR_WRONGSEC, then the client resolves the situation by sending a COMPOUND request that consists of PUTFH, PUTPUBFH, or PUTROOTFH immediately followed by SECINFO_NO_NAME, style SECINFO_STYLE4_CURRENT_FH. See <xref target="Security_Service_Negotiation"/>format="default"/> for instructions on dealing with NFS4ERR_WRONGSEC error returns from PUTFH, PUTROOTFH, PUTPUBFH, or RESTOREFH. </t> <t> If SECINFO_STYLE4_PARENT is specified and there is no parent directory, SECINFO_NO_NAMEMUST<bcp14>MUST</bcp14> return NFS4ERR_NOENT. </t> <t> On success, the current filehandle is consumed (see <xref target="aftersecinfo"/>),format="default"/>), and if the next operation after SECINFO_NO_NAME tries to use the current filehandle, that operation will fail with the status NFS4ERR_NOFILEHANDLE. </t> <t> Everything else about SECINFO_NO_NAME is the same as SECINFO. See the discussion on SECINFO (<xreftarget="OP_SECINFO_DESCRIPTION"/>).target="OP_SECINFO_DESCRIPTION" format="default"/>). </t> </section> <section toc="exclude" anchor="OP_SECINFO_NO_NAME_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> See the discussion on SECINFO (<xref target="OP_SECINFO_IMPLEMENTATION"/>).format="default"/>). </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_SEQUENCE"title="Operationnumbered="true" toc="default"> <name>Operation 53: SEQUENCE - Supply Per-Procedure Sequencing andControl" >Control</name> <section toc="exclude" anchor="OP_SEQUENCE_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct SEQUENCE4args { sessionid4 sa_sessionid; sequenceid4 sa_sequenceid; slotid4 sa_slotid; slotid4 sa_highest_slotid; bool sa_cachethis;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SEQUENCE_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ const SEQ4_STATUS_CB_PATH_DOWN = 0x00000001; const SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING = 0x00000002; const SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED = 0x00000004; const SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED = 0x00000008; const SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED = 0x00000010; const SEQ4_STATUS_ADMIN_STATE_REVOKED = 0x00000020; const SEQ4_STATUS_RECALLABLE_STATE_REVOKED = 0x00000040; const SEQ4_STATUS_LEASE_MOVED = 0x00000080; const SEQ4_STATUS_RESTART_RECLAIM_NEEDED = 0x00000100; const SEQ4_STATUS_CB_PATH_DOWN_SESSION = 0x00000200; const SEQ4_STATUS_BACKCHANNEL_FAULT = 0x00000400; const SEQ4_STATUS_DEVID_CHANGED = 0x00000800; const SEQ4_STATUS_DEVID_DELETED = 0x00001000; struct SEQUENCE4resok { sessionid4 sr_sessionid; sequenceid4 sr_sequenceid; slotid4 sr_slotid; slotid4 sr_highest_slotid; slotid4 sr_target_highest_slotid; uint32_t sr_status_flags; }; union SEQUENCE4res switch (nfsstat4 sr_status) { case NFS4_OK: SEQUENCE4resok sr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SEQUENCE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The SEQUENCE operation is used by the server to implement session request control and the reply cache semantics. </t> <t> SEQUENCEMUST<bcp14>MUST</bcp14> appear as the first operation of any COMPOUND in which it appears. The error NFS4ERR_SEQUENCE_POS will be returned when it is found in any position in a COMPOUND beyond the first. Operations other than SEQUENCE, BIND_CONN_TO_SESSION, EXCHANGE_ID, CREATE_SESSION, and DESTROY_SESSION,MUST NOT<bcp14>MUST NOT</bcp14> appear as the first operation in a COMPOUND. Such operationsMUST<bcp14>MUST</bcp14> yield the error NFS4ERR_OP_NOT_IN_SESSION if they do appear at the start of a COMPOUND. </t> <t> If SEQUENCE is received on a connection not associated with the session via CREATE_SESSION or BIND_CONN_TO_SESSION, and connection association enforcement is enabled (see <xref target="OP_EXCHANGE_ID"/>),format="default"/>), then the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION. </t> <t> The sa_sessionid argument identifies the session to which this request applies. The sr_sessionid resultMUST<bcp14>MUST</bcp14> equal sa_sessionid. </t> <t> The sa_slotid argument is the index in the reply cache for the request. The sa_sequenceid field is the sequence number of the request for the reply cache entry (slot). The sr_slotid resultMUST<bcp14>MUST</bcp14> equal sa_slotid. The sr_sequenceid resultMUST<bcp14>MUST</bcp14> equal sa_sequenceid. </t> <t> The sa_highest_slotid argument is the highest slot ID for which the client has a request outstanding; it could be equal to sa_slotid. The server returns two "highest_slotid" values: sr_highest_slotid and sr_target_highest_slotid. The former is the highest slot ID the server will accept in future SEQUENCE operation, andSHOULD NOT<bcp14>SHOULD NOT</bcp14> be less than the value of sa_highest_slotid (but see <xref target="Slot_Identifiers_and_Server_Reply_Cache"/>format="default"/> for an exception). The latter is the highest slot ID the server would prefer the client use on a future SEQUENCE operation. </t> <t> If sa_cachethis is TRUE, then the client is requesting that the server cache the entire reply in the server's reply cache; therefore, the serverMUST<bcp14>MUST</bcp14> cache the reply (see <xref target="optional_reply_caching"/>).format="default"/>). The serverMAY<bcp14>MAY</bcp14> cache the reply if sa_cachethis is FALSE. If the server does not cache the entire reply, itMUST<bcp14>MUST</bcp14> still record that it executed the request at the specified slot and sequence ID. </t> <t> The response to the SEQUENCE operation contains a word of status flags (sr_status_flags) that can provide to the client information related to the status of the client's lock state and communications paths. Note that any status bits relating to lock stateMAY<bcp14>MAY</bcp14> be reset when lock state is lost due to a server restart (even if the session is persistent across restarts; session persistence does not imply lock state persistence) or the establishment of a new client instance.<list style='hanging'> <t hangText="SEQ4_STATUS_CB_PATH_DOWN"><vspace /></t> <dl newline="true" spacing="normal"> <dt>SEQ4_STATUS_CB_PATH_DOWN</dt> <dd> When set, indicates that the client has no operational backchannel path for any session associated with the client ID, making it necessary for the client to re-establish one. This bit remains set on all SEQUENCE responses on all sessions associated with the client ID until at least one backchannel is available on any session associated with the client ID. If the client fails to re-establish a backchannel for the client ID, it is subject to having recallable state revoked.</t> <t hangText="SEQ4_STATUS_CB_PATH_DOWN_SESSION"><vspace /></dd> <dt>SEQ4_STATUS_CB_PATH_DOWN_SESSION</dt> <dd> When set, indicates that the session has no operational backchannel. There are two reasons why SEQ4_STATUS_CB_PATH_DOWN_SESSION may be set and not SEQ4_STATUS_CB_PATH_DOWN. First is that a callback operation that applies specifically to the session (e.g., CB_RECALL_SLOT, see <xref target="OP_CB_RECALL_SLOT"/>)format="default"/>) needs to be sent. Second is that the server did send a callback operation, but the connection was lost before the reply. The server cannot be sure whether or not the client received the callback operation, and so, per rules on request retry, the serverMUST<bcp14>MUST</bcp14> retry the callback operation over the same session. The SEQ4_STATUS_CB_PATH_DOWN_SESSION bit is the indication to the client that it needs to associate a connection to the session's backchannel. This bit remains set on all SEQUENCE responses of the session until a connection is associated with the session's a backchannel. If the client fails to re-establish a backchannel for the session, it is subject to having recallable state revoked.</t> <t hangText="SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING"><vspace /></dd> <dt>SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING</dt> <dd> <t> When set, indicates that all GSS contexts or RPCSEC_GSS handles assigned to the session's backchannel will expire within a period equal to the lease time. This bit remains set on all SEQUENCE replies until at least one of the following are true:<list style='symbols'> <t></t> <ul spacing="normal"> <li> All SSV RPCSEC_GSS handles on the session's backchannel have been destroyed and all non-SSV GSS contexts have expired.</t> <t></li> <li> At least one more SSV RPCSEC_GSS handle has been added to the backchannel.</t> <t></li> <li> The expiration time of at least one non-SSV GSS context of an RPCSEC_GSS handle is beyond the lease period from the current time (relative to the time of when a SEQUENCE response was sent)</t> </list> </t> <t hangText="SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED"><vspace /></li> </ul> </dd> <dt>SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED</dt> <dd> When set, indicates all non-SSV GSS contexts and all SSV RPCSEC_GSS handles assigned to the session's backchannel have expired or have been destroyed. This bit remains set on all SEQUENCE replies until at least one non-expired non-SSV GSS context for the session's backchannel has been established or at least one SSV RPCSEC_GSS handle has been assigned to the backchannel.</t> <t hangText="SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED"><vspace /></dd> <dt>SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED</dt> <dd> When set, indicates that the lease has expired and as a result the server released all of the client's locking state. This status bit remains set on all SEQUENCE replies until the loss of all such locks has been acknowledged by use of FREE_STATEID (see <xref target="OP_FREE_STATEID"/>),format="default"/>), or by establishing a new client instance by destroying all sessions (via DESTROY_SESSION), the client ID (via DESTROY_CLIENTID), and then invoking EXCHANGE_ID and CREATE_SESSION to establish a new client ID.</t> <t hangText="SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED"><vspace /></dd> <dt>SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED</dt> <dd> When set, indicates that some subset of the client's locks have been revoked due to expiration of the lease period followed by another client's conflicting LOCK operation. This status bit remains set on all SEQUENCE replies until the loss of all such locks has been acknowledged by use of FREE_STATEID.</t> <t hangText="SEQ4_STATUS_ADMIN_STATE_REVOKED"><vspace /></dd> <dt>SEQ4_STATUS_ADMIN_STATE_REVOKED</dt> <dd> When set, indicates that one or more locks have been revoked without expiration of the lease period, due to administrative action. This status bit remains set on all SEQUENCE replies until the loss of all such locks has been acknowledged by use of FREE_STATEID.</t> <t hangText="SEQ4_STATUS_RECALLABLE_STATE_REVOKED"><vspace /></dd> <dt>SEQ4_STATUS_RECALLABLE_STATE_REVOKED</dt> <dd> When set, indicates that one or more recallable objects have been revoked without expiration of the lease period, due to the client's failure to return them when recalled, which may be a consequence of there being no working backchannel and the client failing to re-establish a backchannel per the SEQ4_STATUS_CB_PATH_DOWN, SEQ4_STATUS_CB_PATH_DOWN_SESSION, or SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED status flags. This status bit remains set on all SEQUENCE replies until the loss of all such locks has been acknowledged by use of FREE_STATEID.</t> <t hangText="SEQ4_STATUS_LEASE_MOVED"><vspace /></dd> <dt>SEQ4_STATUS_LEASE_MOVED</dt> <dd> When set, indicates that responsibility for lease renewal has been transferred to one or more new servers. This condition will continue until the client receives an NFS4ERR_MOVED error and the server receives the subsequent GETATTR for the fs_locations or fs_locations_info attribute for an access to each file system for which a lease has been moved to a new server. See <xref target="transferred_lease"/>. </t> <t hangText="SEQ4_STATUS_RESTART_RECLAIM_NEEDED"><vspace />format="default"/>. </dd> <dt>SEQ4_STATUS_RESTART_RECLAIM_NEEDED</dt> <dd> When set, indicates that due to server restart, the client must reclaim locking state. Until the client sends a global RECLAIM_COMPLETE (<xref target="OP_RECLAIM_COMPLETE"/>),format="default"/>), every SEQUENCE operation will return SEQ4_STATUS_RESTART_RECLAIM_NEEDED.</t> <t hangText="SEQ4_STATUS_BACKCHANNEL_FAULT"><vspace /></dd> <dt>SEQ4_STATUS_BACKCHANNEL_FAULT</dt> <dd> The server has encountered an unrecoverable fault with the backchannel (e.g., it has lost track of the sequence ID for a slot in the backchannel). The clientMUST<bcp14>MUST</bcp14> stop sending more requests on the session's fore channel, wait for all outstanding requests to complete on the fore and back channel, and then destroy the session.</t> <t hangText="SEQ4_STATUS_DEVID_CHANGED"><vspace /></dd> <dt>SEQ4_STATUS_DEVID_CHANGED</dt> <dd> The client is using device ID notifications and the server has changed a device ID mapping held by the client. This flag will stay present until the client has obtained the new mapping with GETDEVICEINFO.</t> <t hangText="SEQ4_STATUS_DEVID_DELETED"><vspace /></dd> <dt>SEQ4_STATUS_DEVID_DELETED</dt> <dd> The client is using device ID notifications and the server has deleted a device ID mapping held by the client. This flag will stay in effect until the client sends a GETDEVICEINFO on the device ID with a null value in the argument gdia_notify_types.</t> </list> </t></dd> </dl> <t> The value of the sa_sequenceid argument relative to the cached sequence ID on the slot falls into one of three cases.<list style="symbols"> <t></t> <ul spacing="normal"> <li> If the difference between sa_sequenceid and the server's cached sequence ID at the slot ID is two (2) or more, or if sa_sequenceid is less than the cached sequence ID (accounting for wraparound of the unsigned sequence ID value), then the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_SEQ_MISORDERED.</t> <t></li> <li> If sa_sequenceid and the cached sequence ID are the same, this is a retry, and the server replies with what is recorded in the reply cache. The lease is possibly renewed as described below.</t> <t></li> <li> If sa_sequenceid is one greater (accounting for wraparound) than the cached sequence ID, then this is a new request, and the slot's sequence ID is incremented. The operations subsequent to SEQUENCE, if any, are processed. If there are no other operations, the only other effects are to cache the SEQUENCE reply in the slot, maintain the session's activity, and possibly renew the lease.</t> </list> </t></li> </ul> <t> If the client reuses a slot ID and sequence ID for a completely different request, the serverMAY<bcp14>MAY</bcp14> treat the request as if it is a retry of what it has already executed. The serverMAY<bcp14>MAY</bcp14> however detect the client's illegal reuse and return NFS4ERR_SEQ_FALSE_RETRY. </t> <t> If SEQUENCE returns an error, then the state of the slot (sequence ID, cached reply)MUST NOT<bcp14>MUST NOT</bcp14> change, and the associated leaseMUST NOT<bcp14>MUST NOT</bcp14> be renewed. </t> <t> If SEQUENCE returns NFS4_OK, then the associated leaseMUST<bcp14>MUST</bcp14> be renewed (see <xreftarget="lease_renewal"/>),target="lease_renewal" format="default"/>), except if SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED is returned in sr_status_flags. </t> </section> <section toc="exclude" anchor="OP_SEQUENCE_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The serverMUST<bcp14>MUST</bcp14> maintain a mapping of session ID to client ID in order to validate any operations that follow SEQUENCE that take a stateid as an argument and/or result. </t> <t> If the client establishes a persistent session, then a SEQUENCE received after a server restart might encounter requests performed and recorded in a persistent reply cache before the server restart. In this case, SEQUENCE will be processed successfully, while requests that were not previously performed and recorded are rejected with NFS4ERR_DEADSESSION. </t> <t> Depending on which of the operations within the COMPOUND were successfully performed before the server restart, these operations will also have replies sent from the server reply cache. Note that when these operations establish locking state, it is locking state that applies to the previous server instance and to the previous client ID, even though the server restart, which logically happened after these operations, eliminated that state. In the case of a partially executed COMPOUND, processing may reach an operation not processed during the earlier server instance, making this operation a new one and not performable on the existing session. In this case, NFS4ERR_DEADSESSION will be returned from that operation. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_SET_SSV"title="Operationnumbered="true" toc="default"> <name>Operation 54: SET_SSV - Update SSV for a ClientID" >ID</name> <section toc="exclude" anchor="OP_SET_SSV_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct ssa_digest_input4 { SEQUENCE4args sdi_seqargs; }; struct SET_SSV4args { opaquessa_ssv<>;ssa_ssv<>; opaquessa_digest<>; }; </artwork> </figure>ssa_digest<>; };]]></sourcecode> </section> <section toc="exclude" anchor="OP_SET_SSV_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct ssr_digest_input4 { SEQUENCE4res sdi_seqres; }; struct SET_SSV4resok { opaquessr_digest<>;ssr_digest<>; }; union SET_SSV4res switch (nfsstat4 ssr_status) { case NFS4_OK: SET_SSV4resok ssr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_SET_SSV_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is used to update the SSV for a client ID. Before SET_SSV is called the first time on a client ID, the SSV is zero. The SSV is the key used for the SSV GSS mechanism (<xref target="ssv_mech"/>)format="default"/>) </t> <t> SET_SSVMUST<bcp14>MUST</bcp14> be preceded by a SEQUENCE operation in the same COMPOUND. ItMUST NOT<bcp14>MUST NOT</bcp14> be used if the client did not opt for SP4_SSV state protection when the client ID was created (see <xref target="OP_EXCHANGE_ID"/>);format="default"/>); the server returns NFS4ERR_INVAL in that case. </t> <t> The field ssa_digest is computed as the output of the HMAC (<xreftarget="RFC2104">RFCtarget="RFC2104" format="default">RFC 2104</xref>) using the subkey derived from the SSV4_SUBKEY_MIC_I2T and current SSV as the key (see <xref target="ssv_mech"/>format="default"/> for a description of subkeys), and an XDR encoded value of data type ssa_digest_input4. The field sdi_seqargs is equal to the arguments of the SEQUENCE operation for the COMPOUND procedure that SET_SSV is within. </t> <t> The argument ssa_ssv is XORed with the current SSV to produce the new SSV. The argument ssa_ssvSHOULD<bcp14>SHOULD</bcp14> be generated randomly. </t> <t> In the response, ssr_digest is the output of the HMAC using the subkey derived from SSV4_SUBKEY_MIC_T2I and new SSV as the key, and an XDR encoded value of data type ssr_digest_input4. The field sdi_seqres is equal to the results of the SEQUENCE operation for the COMPOUND procedure that SET_SSV is within. </t> <t> As noted in <xref target="OP_EXCHANGE_ID"/>,format="default"/>, the client and server can maintain multiple concurrent versions of the SSV. The client and server eachMUST<bcp14>MUST</bcp14> maintain an internal SSV version number, which is set to one the first time SET_SSV executes on the server and the client receives the first SET_SSV reply. Each subsequent SET_SSV increases the internal SSV version number by one. The value of this version number corresponds to the smpt_ssv_seq, smt_ssv_seq, sspt_ssv_seq, and ssct_ssv_seq fields of the SSV GSS mechanism tokens (see <xreftarget="ssv_mech"/>).target="ssv_mech" format="default"/>). </t> </section> <section toc="exclude" anchor="OP_SET_SSV_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> When the server receives ssa_digest, itMUST<bcp14>MUST</bcp14> verify the digest by computing the digest the same way the client did and comparing it with ssa_digest. If the server gets a different result, this is an error, NFS4ERR_BAD_SESSION_DIGEST. This error might be the result of another SET_SSV from the same client ID changing the SSV. If so, the client recovers by sending a SET_SSV operation again with a recomputed digest based on the subkey of the new SSV. If the transport connection is dropped after the SET_SSV request is sent, but before the SET_SSV reply is received, then there are special considerations for recovery if the client has no more connections associated with sessions associated with the client ID of the SSV. See <xreftarget="OP_BIND_CONN_TO_SESSION_IMPLEMENTATION"/>.target="OP_BIND_CONN_TO_SESSION_IMPLEMENTATION" format="default"/>. </t> <t> ClientsSHOULD NOT<bcp14>SHOULD NOT</bcp14> send an ssa_ssv that is equal to a previous ssa_ssv, nor equal to a previous or current SSV (including an ssa_ssv equal to zero since the SSV is initialized to zero when the client ID is created). </t> <t> ClientsSHOULD<bcp14>SHOULD</bcp14> send SET_SSV with RPCSEC_GSS privacy. ServersMUST<bcp14>MUST</bcp14> support RPCSEC_GSS with privacy for any COMPOUND that has { SEQUENCE, SET_SSV }. </t> <t> A clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> send SET_SSV with the SSV GSS mechanism's credential because the purpose of SET_SSV is to seed the SSV from non-SSV credentials. Instead, SET_SSVSHOULD<bcp14>SHOULD</bcp14> be sent with the credential of a user that is accessing the client ID for the first time (<xref target="protect_state_change"/>).format="default"/>). However, if the client does send SET_SSV with SSV credentials, the digest protecting the arguments uses the value of the SSV before ssa_ssv is XORed in, and the digest protecting the results uses the value of the SSV after the ssa_ssv is XORed in. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_TEST_STATEID"title="Operationnumbered="true" toc="default"> <name>Operation 55: TEST_STATEID - Test Stateids forValidity" >Validity</name> <section toc="exclude" anchor="OP_TEST_STATEID_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct TEST_STATEID4args { stateid4ts_stateids<>; }; </artwork> </figure>ts_stateids<>; };]]></sourcecode> </section> <section toc="exclude" anchor="OP_TEST_STATEID_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct TEST_STATEID4resok { nfsstat4tsr_status_codes<>;tsr_status_codes<>; }; union TEST_STATEID4res switch (nfsstat4 tsr_status) { case NFS4_OK: TEST_STATEID4resok tsr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_TEST_STATEID4_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The TEST_STATEID operation is used to check the validity of a set of stateids. It can be used at any time, but the client should definitely use it when it receives an indication that one or more of its stateids have been invalidated due to lock revocation. This occurs when the SEQUENCE operation returns with one of the following sr_status_flags set:<list style='symbols'> <t> SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED</t><t><ul spacing="normal"> <li> SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED </li> <li> SEQ4_STATUS_EXPIRED_ADMIN_STATE_REVOKED</t> <t></li> <li> SEQ4_STATUS_EXPIRED_RECALLABLE_STATE_REVOKED</t> </list> </t></li> </ul> <t> The client can use TEST_STATEID one or more times to test the validity of its stateids. Each use of TEST_STATEID allows a large set of such stateids to be tested and avoids problems with earlier stateids in a COMPOUND request from interfering with the checking of subsequent stateids, as would happen if individual stateids were tested by a series of corresponding by operations in a COMPOUND request. </t> <t> For each stateid, the server returns the status code that would be returned if that stateid were to be used in normal operation. Returning such a status indication is not an error and does not cause COMPOUND processing to terminate. Checks for the validity of the stateid proceed as they would for normal operations with a number of exceptions:<list style='symbols'> <t></t> <ul spacing="normal"> <li> There is no check for the type of stateid object, as would be the case for normal use of a stateid.</t> <t></li> <li> There is no reference to the current filehandle.</t> <t></li> <li> Special stateids are always considered invalid (they result in the error code NFS4ERR_BAD_STATEID).</t> </list> </t></li> </ul> <t> All stateids are interpreted as being associated with the client for the current session. Any possible association with a previous instance of the client (as stale stateids) is not considered. </t> <t> The valid status values in the returned status_code array are NFS4ERR_OK, NFS4ERR_BAD_STATEID, NFS4ERR_OLD_STATEID, NFS4ERR_EXPIRED, NFS4ERR_ADMIN_REVOKED, and NFS4ERR_DELEG_REVOKED. </t> </section> <section toc="exclude" anchor="OP_TEST_STATEID_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> See Sections <xref target="stateid_structure"format="counter" />format="counter"/> and <xref target="stateid_lifetime"format="counter" />format="counter"/> for a discussion of stateid structure, lifetime, and validation. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_WANT_DELEGATION"title="Operationnumbered="true" toc="default"> <name>Operation 56: WANT_DELEGATION - RequestDelegation" >Delegation</name> <section toc="exclude" anchor="OP_WANT_DELEGATION_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ union deleg_claim4 switch (open_claim_type4 dc_claim) { /* * No special rights to object. Ordinary delegation * request of the specified object. Object identified * by filehandle. */ case CLAIM_FH: /* new to v4.1 */ /* CURRENT_FH: object being delegated */ void; /* * Right to file based on a delegation granted * to a previous boot instance of the client. * File is specified by filehandle. */ case CLAIM_DELEG_PREV_FH: /* new to v4.1 */ /* CURRENT_FH: object being delegated */ void; /* * Right to the file established by an open previous * to server reboot. File identified by filehandle. * Used during server reclaim grace period. */ case CLAIM_PREVIOUS: /* CURRENT_FH: object being reclaimed */ open_delegation_type4 dc_delegate_type; }; struct WANT_DELEGATION4args { uint32_t wda_want; deleg_claim4 wda_claim;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_WANT_DELEGATION_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ union WANT_DELEGATION4res switch (nfsstat4 wdr_status) { case NFS4_OK: open_delegation4 wdr_resok4; default: void;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_WANT_DELEGATION_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> Where this description mandates the return of a specific error code for a specific condition, and where multiple conditions apply, the serverMAY<bcp14>MAY</bcp14> return any of the mandated error codes. </t> <t> This operation allows a client to:<list style='symbols'> <t></t> <ul spacing="normal"> <li> Get a delegation on all types of files except directories.</t> <t></li> <li> Register a "want" for a delegation for the specified file object, and be notified via a callback when the delegation is available. The serverMAY<bcp14>MAY</bcp14> support notifications of availability via callbacks. If the server does not support registration of wants, itMUST NOT<bcp14>MUST NOT</bcp14> return an error to indicate that, and insteadMUST<bcp14>MUST</bcp14> return with ond_why set to WND4_CONTENTION or WND4_RESOURCE and ond_server_will_push_deleg or ond_server_will_signal_avail set to FALSE. When the server indicates that it will notify the client by means of a callback, it will either provide the delegation using a CB_PUSH_DELEG operation or cancel its promise by sending a CB_WANTS_CANCELLED operation.</t> <t></li> <li> Cancel a want for a delegation.</t> </list> </t></li> </ul> <t> The clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> set OPEN4_SHARE_ACCESS_READ andSHOULD NOT<bcp14>SHOULD NOT</bcp14> set OPEN4_SHARE_ACCESS_WRITE in wda_want. If it does, the serverMUST<bcp14>MUST</bcp14> ignore them. </t> <t> The meanings of the following flags in wda_want are the same as they are in OPEN, except as noted below.<list style="symbols"> <t> OPEN4_SHARE_ACCESS_WANT_READ_DELEG</t><t><ul spacing="normal"> <li> OPEN4_SHARE_ACCESS_WANT_READ_DELEG </li> <li> OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG</t> <t></li> <li> OPEN4_SHARE_ACCESS_WANT_ANY_DELEG</t> <t></li> <li> OPEN4_SHARE_ACCESS_WANT_NO_DELEG. Unlike the OPEN operation, this flagSHOULD NOT<bcp14>SHOULD NOT</bcp14> be set by the client in the arguments to WANT_DELEGATION, andMUST<bcp14>MUST</bcp14> be ignored by the server.</t> <t></li> <li> OPEN4_SHARE_ACCESS_WANT_CANCEL</t> <t></li> <li> OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL</t> <t></li> <li> OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED</t> </list> </t></li> </ul> <t> The handling of the above flags in WANT_DELEGATION is the same as in OPEN. Information about the delegation and/or the promises the server is making regarding future callbacks are the same as those described in the open_delegation4 structure. </t> <t> The successful results of WANT_DELEGATION are of data type open_delegation4, which is the same data type as the "delegation" field in the results of the OPEN operation (see <xref target="OP_OPEN_DESCRIPTION"/>).format="default"/>). The server constructs wdr_resok4 the same way it constructs OPEN's "delegation" with one difference: WANT_DELEGATIONMUST NOT<bcp14>MUST NOT</bcp14> return a delegation type of OPEN_DELEGATE_NONE. </t> <t> If ((wda_want & OPEN4_SHARE_ACCESS_WANT_DELEG_MASK) & ~OPEN4_SHARE_ACCESS_WANT_NO_DELEG) is zero, then the client is indicating no explicit desire or non-desire for a delegation and the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_INVAL. </t> <t> The client uses the OPEN4_SHARE_ACCESS_WANT_CANCEL flag in the WANT_DELEGATION operation to cancel a previously requested want for a delegation. Note that if the server is in the process of sending the delegation (via CB_PUSH_DELEG) at the time the client sends a cancellation of the want, the delegation might still be pushed to the client. </t> <t> If WANT_DELEGATION fails to return a delegation, and the server returns NFS4_OK, the serverMUST<bcp14>MUST</bcp14> set the delegation type to OPEN4_DELEGATE_NONE_EXT, and set od_whynone, as described in <xref target="OP_OPEN"/>.format="default"/>. Write delegations are not available for file types that are not writable. This includes file objects of types NF4BLK, NF4CHR, NF4LNK, NF4SOCK, and NF4FIFO. If the client requests OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG without OPEN4_SHARE_ACCESS_WANT_READ_DELEG on an object with one of the aforementioned file types, the server must set wdr_resok4.od_whynone.ond_why to WND4_WRITE_DELEG_NOT_SUPP_FTYPE. </t> </section> <section toc="exclude" anchor="OP_WANT_DELEGATION_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> A request for a conflicting delegation is not normally intended to trigger the recall of the existing delegation. Servers may choose to treat some clients as having higher priority such that their wants will trigger recall of an existing delegation, although that is expected to be an unusual situation. </t> <t> Servers will generally recall delegations assigned by WANT_DELEGATION on the same basis as those assigned by OPEN. CB_RECALL will generally be done only when other clients perform operations inconsistent with the delegation. The normal response to aging of delegations is to use CB_RECALL_ANY, in order to give the client the opportunity to keep the delegations most useful from its point of view. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_DESTROY_CLIENTID"title="Operationnumbered="true" toc="default"> <name>Operation 57: DESTROY_CLIENTID - Destroy a ClientID" >ID</name> <section toc="exclude" anchor="OP_DESTROY_CLIENTID_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct DESTROY_CLIENTID4args { clientid4 dca_clientid;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DESTROY_CLIENTID_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct DESTROY_CLIENTID4res { nfsstat4 dcr_status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_DESTROY_CLIENTID_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The DESTROY_CLIENTID operation destroys the client ID. If there are sessions (both idle and non-idle), opens, locks, delegations, layouts, and/or wants (<xref target="OP_WANT_DELEGATION"/>)format="default"/>) associated with the unexpired lease of the client ID, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_CLIENTID_BUSY. DESTROY_CLIENTIDMAY<bcp14>MAY</bcp14> be preceded with a SEQUENCE operation as long as the client ID derived from the session ID of SEQUENCE is not the same as the client ID to be destroyed. If the client IDs are the same, then the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_CLIENTID_BUSY. </t> <t> If DESTROY_CLIENTID is not prefixed by SEQUENCE, itMUST<bcp14>MUST</bcp14> be the only operation in the COMPOUND request (otherwise, the serverMUST<bcp14>MUST</bcp14> return NFS4ERR_NOT_ONLY_OP). If the operation is sent without a SEQUENCE preceding it, a client that retransmits the request may receive an error in response, because the original request might have been successfully executed. </t> </section> <section toc="exclude" anchor="OP_DESTROY_CLIENTID_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> DESTROY_CLIENTID allows a server to immediately reclaim the resources consumed by an unused client ID, and also to forget that it ever generated the client ID. By forgetting that it ever generated the client ID, the server can safely reuse the client ID on a future EXCHANGE_ID operation. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><sectiontitle="Operationanchor="OP_RECLAIM_COMPLETE" numbered="true" toc="default"> <name>Operation 58: RECLAIM_COMPLETE - Indicates ReclaimsFinished" anchor="OP_RECLAIM_COMPLETE">Finished</name> <sectiontitle="ARGUMENT"toc="exclude"anchor="OP_RECLAIM_COMPLETE_ARGUMENT"> <figure> <artwork> <CODE BEGINS>anchor="OP_RECLAIM_COMPLETE_ARGUMENT" numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct RECLAIM_COMPLETE4args { /* * If rca_one_fs TRUE, * * CURRENT_FH: object in * file system reclaim is * complete for. */ bool rca_one_fs; };<CODE ENDS> </artwork> </figure>]]></sourcecode> </section> <sectiontitle="RESULTS"toc="exclude"anchor="OP_RECLAIM_COMPLETE_RESULTS"> <figure> <artwork> <CODE BEGINS>anchor="OP_RECLAIM_COMPLETE_RESULTS" numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct RECLAIM_COMPLETE4res { nfsstat4 rcr_status; };<CODE ENDS> </artwork> </figure>]]></sourcecode> </section> <sectiontitle="DESCRIPTION"toc="exclude"anchor="OP_RECLAIM_COMPLETE_DESCRIPTION">anchor="OP_RECLAIM_COMPLETE_DESCRIPTION" numbered="true"> <name>DESCRIPTION</name> <t> A RECLAIM_COMPLETE operation is used to indicate that the client has reclaimed all of the locking state that it will recover using reclaim, when it is recovering state due to either a server restart or the migration of a file system to another server. There are two types of RECLAIM_COMPLETE operations:<list style="symbols"> <t></t> <ul spacing="normal"> <li> When rca_one_fs is FALSE, a global RECLAIM_COMPLETE is being done. This indicates that recovery of all locks that the client held on the previous server instance has been completed. The current filehandle need not be set in this case.</t> <t></li> <li> When rca_one_fs is TRUE, a file system-specific RECLAIM_COMPLETE is being done. This indicates that recovery of locks for a single fs (the one designated by the current filehandle) due to the migration of the file system has been completed. Presence of a current filehandle is required when rca_one_fs is set to TRUE. When the current filehandle designates a filehandle in a file system not in the process of migration, the operation returns NFS4_OK and is otherwise ignored.</t> </list> </t></li> </ul> <t> Once a RECLAIM_COMPLETE is done, there can be no further reclaim operations for locks whose scope is defined as having completed recovery. Once the client sends RECLAIM_COMPLETE, the server will not allow the client to do subsequent reclaims of locking state for that scope and, if these are attempted, will return NFS4ERR_NO_GRACE. </t> <t> Whenever a client establishes a new client ID and before it does the first non-reclaim operation that obtains a lock, itMUST<bcp14>MUST</bcp14> send a RECLAIM_COMPLETE with rca_one_fs set to FALSE, even if there are no locks to reclaim. If non-reclaim locking operations are done before the RECLAIM_COMPLETE, an NFS4ERR_GRACE error will be returned. </t> <t> Similarly, when the client accesses a migrated file system on a new server, before it sends the first non-reclaim operation that obtains a lock on this new server, itMUST<bcp14>MUST</bcp14> send a RECLAIM_COMPLETE with rca_one_fs set to TRUE and current filehandle within that file system, even if there are no locks to reclaim. If non-reclaim locking operations are done on that file system before the RECLAIM_COMPLETE, an NFS4ERR_GRACE error will be returned. </t> <t> It should be noted that there are situations in which a client needs to issue both forms of RECLAIM_COMPLETE. An example is an instance of file system migration in which the file system is migrated to a server for which the client has no clientid. As a result, the client needs to obtain a clientid from the server (incurring the responsibility to do RECLAIM_COMPLETE with rca_one_fs set to FALSE) as well as RECLAIM_COMPLETE with rca_one_fs set to TRUE to complete the per-fs grace period associated with the file system migration. These two may be done in any order as long as all necessary lock reclaims have been done before issuing either of them. </t> <t> Any locks not reclaimed at the point at which RECLAIM_COMPLETE is done become non-reclaimable. The clientMUST NOT<bcp14>MUST NOT</bcp14> attempt to reclaim them, either during the current server instance or in any subsequent server instance, or on another server to which responsibility for that file system is transferred. If the client were to do so, it would be violating the protocol by representing itself as owning locks that it does not own, and so has no right to reclaim. SeeSection 8.4.3 of<xreftarget="RFC5661"/>target="RFC5661" sectionFormat="of" section="8.4.3"/> for a discussion of edge conditions related to lock reclaim. </t> <t> By sending a RECLAIM_COMPLETE, the client indicates readiness to proceed to do normal non-reclaim locking operations. The client should be aware that such operations may temporarily result in NFS4ERR_GRACE errors until the server is ready to terminate its grace period. </t> </section> <sectiontitle="IMPLEMENTATION"toc="exclude"anchor="OP_RECLAIM_COMPLETE_IMPLEMENTATION">anchor="OP_RECLAIM_COMPLETE_IMPLEMENTATION" numbered="true"> <name>IMPLEMENTATION</name> <t> Servers will typically use the information as to when reclaim activity is complete to reduce the length of the grace period. When the server maintains in persistent storage a list of clients that might have had locks, it is able to use the fact that all such clients have done a RECLAIM_COMPLETE to terminate the grace period and begin normal operations (i.e., grant requests for new locks) sooner than it might otherwise. </t> <t> Latency can be minimized by doing a RECLAIM_COMPLETE as part of the COMPOUND request in which the last lock-reclaiming operation is done. When there are no reclaims to be done, RECLAIM_COMPLETE should be done immediately in order to allow the grace period to end as soon as possible. </t> <t> RECLAIM_COMPLETE should only be done once for each server instance or occasion of the transition of a file system. If it is done a second time, the error NFS4ERR_COMPLETE_ALREADY will result. Note that because of the session feature's retry protection, retries of COMPOUND requests containing RECLAIM_COMPLETE operation will not result in this error. </t> <t> When a RECLAIM_COMPLETE is sent, the client effectively acknowledges any locks not yet reclaimed as lost. This allows the server to re-enable the client to recover locks if the occurrence of edge conditions, as described in <xreftarget="network_partitions_and_recovery"/>,target="network_partitions_and_recovery" format="default"/>, had caused the server to disable the client's ability to recover locks. </t> <t> Because previous descriptions of RECLAIM_COMPLETE were not sufficiently explicit about the circumstances in which use of RECLAIM_COMPLETE with rca_one_fs set to TRUE was appropriate, there have been cases in which it has been misused by clients who have issued RECLAIM_COMPLETE with rca_one_fs set to TRUE when it should have not been. There have also been cases in which servers have, in various ways, not responded to such misuse as described above, either ignoring the rca_one_fs setting (treating the operation as a global RECLAIM_COMPLETE) or ignoring the entire operation. </t> <t> While clientsSHOULD NOT<bcp14>SHOULD NOT</bcp14> misuse thisfeaturefeature, and serversSHOULD<bcp14>SHOULD</bcp14> respond to such misuse as described above,implementersimplementors need to be aware of the following considerations as they make necessarytradeoffstrade-offs between interoperability with existing implementations and proper support for facilities to allow lock recovery in the event of file system migration.<list style="symbols"> <t></t> <ul spacing="normal"> <li> When servers have no support for becoming the destination server of a file system subject to migration, there is no possibility of a per-fs RECLAIM_COMPLETE being donelegitimatelylegitimately, and occurrences of itSHOULD<bcp14>SHOULD</bcp14> be ignored. However, the negative consequences of accepting such mistaken use are quite limited as long as the client does not issue it before all necessary reclaims are done.</t> <t></li> <li> When a server might become the destination for a file system being migrated, inappropriate use of per-fs RECLAIM_COMPLETE is more concerning. In the case in which the file system designated is not within a per-fs grace period, the per-fs RECLAIM_COMPLETESHOULD<bcp14>SHOULD</bcp14> be ignored, with the negative consequences of accepting it being limited, as in the case in which migration is not supported. However, if the server encounters a file system undergoing migration, the operation cannot be accepted as if it were a global RECLAIM_COMPLETE without invalidating its intended use.</t> </list> </t></li> </ul> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_ILLEGAL"title="Operationnumbered="true" toc="default"> <name>Operation 10044: ILLEGAL - IllegalOperation" >Operation</name> <section toc="exclude" anchor="OP_ILLEGAL_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork> void; </artwork> </figure>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ void;]]></sourcecode> </section> <section toc="exclude" anchor="OP_ILLEGAL_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ struct ILLEGAL4res { nfsstat4 status;}; </artwork> </figure>};]]></sourcecode> </section> <section toc="exclude" anchor="OP_ILLEGAL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is a placeholder for encoding a result to handle the case of the client sending an operation code within COMPOUND that is not supported. See the COMPOUND procedure description for more details. </t> <t> The status field of ILLEGAL4resMUST<bcp14>MUST</bcp14> be set to NFS4ERR_OP_ILLEGAL. </t> </section> <section toc="exclude" anchor="OP_ILLEGAL_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> A client will probably not send an operation with code OP_ILLEGAL but if it does, the response will be ILLEGAL4res just as it would be with any other invalid operation code. Note that if the server gets an illegal operation code that is not OP_ILLEGAL, and if the server checks for legal operation codes during the XDR decode phase, then the ILLEGAL4res would not be returned. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --></section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="nfsv41callbackprocedures"title="NFSv4.1numbered="true" toc="default"> <name>NFSv4.1 CallbackProcedures">Procedures</name> <t> The procedures used for callbacks are defined in the following sections. In the interest of clarity, the terms "client" and "server" refer to NFS clients and servers, despite the fact that for an individual callback RPC, the sense of these terms would be precisely the opposite. </t> <t> Both procedures, CB_NULL and CB_COMPOUND,MUST<bcp14>MUST</bcp14> be implemented. </t><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="PROC_CB_NULL"title="Procedurenumbered="true" toc="default"> <name>Procedure 0: CB_NULL - NoOperation" >Operation</name> <section toc="exclude" anchor="PROC_CB_NULL_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork> void; </artwork> </figure>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ void;]]></sourcecode> </section> <section toc="exclude" anchor="PROC_CB_NULL_RESULTS"title="RESULTS"> <figure> <artwork> void; </artwork> </figure>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ void;]]></sourcecode> </section> <section toc="exclude" anchor="PROC_CB_NULL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> CB_NULL is the standard ONC RPC NULL procedure, with the standard void argument and void response. Even though there is no direct functionality associated with this procedure, the server will use CB_NULL to confirm the existence of a path for RPCs from the server to client. </t> </section> <section toc="exclude" anchor="PROC_CB_NULL_ERRORS"title="ERRORS">numbered="true"> <name>ERRORS</name> <t> None. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="PROC_CB_COMPOUND"title="Procedurenumbered="true" toc="default"> <name>Procedure 1: CB_COMPOUND - CompoundOperations" >Operations</name> <section toc="exclude" anchor="PROC_CB_COMPOUND_ARGUMENTS"title="ARGUMENTS"> <figure> <artwork>numbered="true"> <name>ARGUMENTS</name> <sourcecode type="xdr"><![CDATA[ enum nfs_cb_opnum4 { OP_CB_GETATTR = 3, OP_CB_RECALL = 4, /* Callback operations new to NFSv4.1 */ OP_CB_LAYOUTRECALL = 5, OP_CB_NOTIFY = 6, OP_CB_PUSH_DELEG = 7, OP_CB_RECALL_ANY = 8, OP_CB_RECALLABLE_OBJ_AVAIL = 9, OP_CB_RECALL_SLOT = 10, OP_CB_SEQUENCE = 11, OP_CB_WANTS_CANCELLED = 12, OP_CB_NOTIFY_LOCK = 13, OP_CB_NOTIFY_DEVICEID = 14, OP_CB_ILLEGAL = 10044 };</artwork> </figure> <figure> <artwork>union nfs_cb_argop4 switch (unsigned argop) { case OP_CB_GETATTR: CB_GETATTR4args opcbgetattr; case OP_CB_RECALL: CB_RECALL4args opcbrecall; case OP_CB_LAYOUTRECALL: CB_LAYOUTRECALL4args opcblayoutrecall; case OP_CB_NOTIFY: CB_NOTIFY4args opcbnotify; case OP_CB_PUSH_DELEG: CB_PUSH_DELEG4args opcbpush_deleg; case OP_CB_RECALL_ANY: CB_RECALL_ANY4args opcbrecall_any; case OP_CB_RECALLABLE_OBJ_AVAIL: CB_RECALLABLE_OBJ_AVAIL4args opcbrecallable_obj_avail; case OP_CB_RECALL_SLOT: CB_RECALL_SLOT4args opcbrecall_slot; case OP_CB_SEQUENCE: CB_SEQUENCE4args opcbsequence; case OP_CB_WANTS_CANCELLED: CB_WANTS_CANCELLED4args opcbwants_cancelled; case OP_CB_NOTIFY_LOCK: CB_NOTIFY_LOCK4args opcbnotify_lock; case OP_CB_NOTIFY_DEVICEID: CB_NOTIFY_DEVICEID4args opcbnotify_deviceid; case OP_CB_ILLEGAL: void; };</artwork> </figure> <figure> <artwork>struct CB_COMPOUND4args { utf8str_cs tag; uint32_t minorversion; uint32_t callback_ident; nfs_cb_argop4argarray<>;argarray<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="PROC_CB_COMPOUND_RESULTS"title="RESULTS"> <figure> <artwork>numbered="true"> <name>RESULTS</name> <sourcecode type="xdr"><![CDATA[ union nfs_cb_resop4 switch (unsigned resop) { case OP_CB_GETATTR: CB_GETATTR4res opcbgetattr; case OP_CB_RECALL: CB_RECALL4res opcbrecall; /* new NFSv4.1 operations */ case OP_CB_LAYOUTRECALL: CB_LAYOUTRECALL4res opcblayoutrecall; case OP_CB_NOTIFY: CB_NOTIFY4res opcbnotify; case OP_CB_PUSH_DELEG: CB_PUSH_DELEG4res opcbpush_deleg; case OP_CB_RECALL_ANY: CB_RECALL_ANY4res opcbrecall_any; case OP_CB_RECALLABLE_OBJ_AVAIL: CB_RECALLABLE_OBJ_AVAIL4res opcbrecallable_obj_avail; case OP_CB_RECALL_SLOT: CB_RECALL_SLOT4res opcbrecall_slot; case OP_CB_SEQUENCE: CB_SEQUENCE4res opcbsequence; case OP_CB_WANTS_CANCELLED: CB_WANTS_CANCELLED4res opcbwants_cancelled; case OP_CB_NOTIFY_LOCK: CB_NOTIFY_LOCK4res opcbnotify_lock; case OP_CB_NOTIFY_DEVICEID: CB_NOTIFY_DEVICEID4res opcbnotify_deviceid; /* Not new operation */ case OP_CB_ILLEGAL: CB_ILLEGAL4res opcbillegal; };</artwork> </figure> <figure> <artwork>struct CB_COMPOUND4res { nfsstat4 status; utf8str_cs tag; nfs_cb_resop4resarray<>;resarray<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_COMPOUND_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_COMPOUND procedure is used to combine one or more of the callback procedures into a single RPC request. The main callback RPC program has two main procedures: CB_NULL and CB_COMPOUND. All other operations use the CB_COMPOUND procedure as a wrapper. </t> <t> During the processing of the CB_COMPOUND procedure, the client may find that it does not have the available resources to execute any or all of the operations within the CB_COMPOUND sequence. Refer to <xref target="COMPOUND_Sizing_Issues"/>format="default"/> for details. </t> <t> The minorversion field of the argumentsMUST<bcp14>MUST</bcp14> be the same as the minorversion of the COMPOUND procedure used to create the client ID and session. For NFSv4.1, minorversionMUST<bcp14>MUST</bcp14> be set to 1. </t> <t> Contained within the CB_COMPOUND results is a "status" field. This statusMUST<bcp14>MUST</bcp14> be equal to the status of the last operation that was executed within the CB_COMPOUND procedure. Therefore, if an operation incurred an error, then the "status" value will be the same error value as is being returned for the operation that failed. </t> <t> The "tag" field is handled the same way as that of the COMPOUND procedure (see <xref target="OP_COMPOUND_DESCRIPTION"/>).format="default"/>). </t> <t> Illegal operation codes are handled in the same way as they are handled for the COMPOUND procedure. </t> </section> <section toc="exclude" anchor="PROC_CB_COMPOUND_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The CB_COMPOUND procedure is used to combine individual operations into a single RPC request. The client interprets each of the operations in turn. If an operation is executed by the client and the status of that operation is NFS4_OK, then the next operation in the CB_COMPOUND procedure is executed. The client continues this process until there are no more operations to be executed or one of the operations has a status value other than NFS4_OK. </t> </section> <section toc="exclude" anchor="OP_CB_COMPOUND_ERRORS"title="ERRORS">numbered="true"> <name>ERRORS</name> <t> CB_COMPOUND will of course return every error that each operation on the backchannel can return (see <xreftarget="cb_op_error_returns"/>).target="cb_op_error_returns" format="default"/>). However, if CB_COMPOUND returns zero operations, obviously the error returned by COMPOUND has nothing to do with an error returned by an operation. The list of errors CB_COMPOUND will return if it processes zero operations includes: </t><texttable anchor="CB_compounderrs"> <preamble>CB_COMPOUND error returns</preamble> <ttcol align='left'>Error</ttcol> <ttcol align='left'>Notes</ttcol> <c>NFS4ERR_BADCHAR</c> <c>The<table anchor="CB_compounderrs" align="center"> <name>CB_COMPOUND Error Returns</name> <thead> <tr> <th align="left">Error</th> <th align="left">Notes</th> </tr> </thead> <tbody> <tr> <td align="left">NFS4ERR_BADCHAR</td> <td align="left">The tag argument has a character the replier does not support.</c> <c>NFS4ERR_BADXDR</c> <c> </c> <c>NFS4ERR_DELAY</c> <c> </c> <c>NFS4ERR_INVAL</c> <c>The</td> </tr> <tr> <td align="left">NFS4ERR_BADXDR</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_DELAY</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_INVAL</td> <td align="left">The tag argument is not in UTF-8encoding.</c> <c>NFS4ERR_MINOR_VERS_MISMATCH</c> <c> </c> <c>NFS4ERR_SERVERFAULT</c> <c> </c> <c>NFS4ERR_TOO_MANY_OPS</c> <c> </c> <c>NFS4ERR_REP_TOO_BIG</c> <c> </c> <c>NFS4ERR_REP_TOO_BIG_TO_CACHE</c> <c> </c> <c>NFS4ERR_REQ_TOO_BIG</c> <c> </c> </texttable>encoding.</td> </tr> <tr> <td align="left">NFS4ERR_MINOR_VERS_MISMATCH</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_SERVERFAULT</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_TOO_MANY_OPS</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_REP_TOO_BIG_TO_CACHE</td> <td align="left"> </td> </tr> <tr> <td align="left">NFS4ERR_REQ_TOO_BIG</td> <td align="left"> </td> </tr> </tbody> </table> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --></section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="nfsv41cboperations"title="NFSv4.1numbered="true" toc="default"> <name>NFSv4.1 CallbackOperations"> <!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) -->Operations</name> <section anchor="OP_CB_GETATTR"title="Operationnumbered="true" toc="default"> <name>Operation 3: CB_GETATTR - GetAttributes" >Attributes</name> <section toc="exclude" anchor="OP_CB_GETATTR_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct CB_GETATTR4args { nfs_fh4 fh; bitmap4 attr_request; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_GETATTR_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_GETATTR4resok { fattr4 obj_attributes; }; union CB_GETATTR4res switch (nfsstat4 status) { case NFS4_OK: CB_GETATTR4resok resok4; default: void; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_GETATTR_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_GETATTR operation is used by the server to obtain the current modified state of a file that has been OPEN_DELEGATE_WRITE delegated. The size and change attributes are the only ones guaranteed to be serviced by the client. See <xreftarget="handling_cb_getattr"/>target="handling_cb_getattr" format="default"/> for a full description of how the client and server are to interact with the use of CB_GETATTR. </t> <t> If the filehandle specified is not one for which the client holds an OPEN_DELEGATE_WRITE delegation, an NFS4ERR_BADHANDLE error is returned. </t> </section> <section toc="exclude" anchor="OP_CB_GETATTR_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The client returns attrmask bits and the associated attribute values only for the change attribute, and attributes that it may change (time_modify, and size). </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_RECALL"title="Operationnumbered="true" toc="default"> <name>Operation 4: CB_RECALL - Recall aDelegation" >Delegation</name> <section toc="exclude" anchor="OP_CB_RECALL_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct CB_RECALL4args { stateid4 stateid; bool truncate; nfs_fh4 fh; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALL_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_RECALL4res { nfsstat4 status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_RECALL operation is used to begin the process of recalling a delegation and returning it to the server. </t> <t> The truncate flag is used to optimize recall for a file object that is a regular file and is about to be truncated to zero. When it is TRUE, the client is freed of the obligation to propagate modified data for the file to the server, since this data is irrelevant. </t> <t> If the handle specified is not one for which the client holds a delegation, an NFS4ERR_BADHANDLE error is returned. </t> <t> If the stateid specified is not one corresponding to an OPEN delegation for the file specified by the filehandle, an NFS4ERR_BAD_STATEID is returned. </t> </section> <section toc="exclude" anchor="OP_CB_RECALL_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The clientSHOULD<bcp14>SHOULD</bcp14> reply to the callback immediately. Replying does not complete the recall except when the value of the reply's status field is neither NFS4ERR_DELAY nor NFS4_OK. The recall is not complete until the delegation is returned using a DELEGRETURN operation. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_LAYOUTRECALL"title="Operationnumbered="true" toc="default"> <name>Operation 5: CB_LAYOUTRECALL - Recall Layout fromClient" >Client</name> <section toc="exclude" anchor="OP_CB_LAYOUTRECALL_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ /* * NFSv4.1 callback arguments and results */ enum layoutrecall_type4 { LAYOUTRECALL4_FILE = LAYOUT4_RET_REC_FILE, LAYOUTRECALL4_FSID = LAYOUT4_RET_REC_FSID, LAYOUTRECALL4_ALL = LAYOUT4_RET_REC_ALL }; struct layoutrecall_file4 { nfs_fh4 lor_fh; offset4 lor_offset; length4 lor_length; stateid4 lor_stateid; }; union layoutrecall4 switch(layoutrecall_type4 lor_recalltype) { case LAYOUTRECALL4_FILE: layoutrecall_file4 lor_layout; case LAYOUTRECALL4_FSID: fsid4 lor_fsid; case LAYOUTRECALL4_ALL: void; }; struct CB_LAYOUTRECALL4args { layouttype4 clora_type; layoutiomode4 clora_iomode; bool clora_changed; layoutrecall4 clora_recall; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_LAYOUTRECALL_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_LAYOUTRECALL4res { nfsstat4 clorr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_LAYOUTRECALL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_LAYOUTRECALL operation is used by the server to recall layouts from the client; as a result, the client will begin the process of returning layouts via LAYOUTRETURN. The CB_LAYOUTRECALL operation specifies one of three forms of recall processing with the value of layoutrecall_type4. The recall is for one of the following: a specific layout of a specific file (LAYOUTRECALL4_FILE), an entire file system ID (LAYOUTRECALL4_FSID), or all file systems (LAYOUTRECALL4_ALL). </t> <t> The behavior of the operation varies based on the value of the layoutrecall_type4. The value and behaviors are:<list style="hanging"> <t hangText="LAYOUTRECALL4_FILE"></t> <t></t> <dl newline="true" spacing="normal"> <dt>LAYOUTRECALL4_FILE</dt> <dd><t> For a layout to match the recall request, the values of the following fields must match those of the layout: clora_type, clora_iomode, lor_fh, and the byte-range specified by lor_offset and lor_length. The clora_iomode field may have a special value of LAYOUTIOMODE4_ANY. The special value LAYOUTIOMODE4_ANY will match any iomode originally returned in a layout; therefore, it acts as a wild card. The other special value used is for lor_length. If lor_length has a value of NFS4_UINT64_MAX, the lor_length field means the maximum possible file size. If a matching layout is found, itMUST<bcp14>MUST</bcp14> be returned using the LAYOUTRETURN operation (see <xref target="OP_LAYOUTRETURN"/>).format="default"/>). An example of the field's special value use is if clora_iomode is LAYOUTIOMODE4_ANY, lor_offset is zero, and lor_length is NFS4_UINT64_MAX, then the entire layout is to bereturned. </t>returned.</t> <t> The NFS4ERR_NOMATCHING_LAYOUT error is only returned when the client does not hold layouts for the file or if the client does not have any overlapping layouts for the specification in the layoutrecall. </t> <t hangText="LAYOUTRECALL4_FSIDrecall.</t> </dd> <dt>LAYOUTRECALL4_FSID andLAYOUTRECALL4_ALL"></t> <t>LAYOUTRECALL4_ALL</dt> <dd><t> If LAYOUTRECALL4_FSID is specified, the fsid specifies the file system for which any outstanding layoutsMUST<bcp14>MUST</bcp14> be returned. If LAYOUTRECALL4_ALL is specified, all outstanding layoutsMUST<bcp14>MUST</bcp14> be returned. In addition, LAYOUTRECALL4_FSID and LAYOUTRECALL4_ALL specify that all the storage device ID to storage device address mappings in the affected file system(s) are also recalled. The respective LAYOUTRETURN with either LAYOUTRETURN4_FSID or LAYOUTRETURN4_ALL acknowledges to the server that the client invalidated the said device mappings. See <xref target="bulk_layouts"/>format="default"/> for considerations with "bulk" recall of layouts. </t> <t> The NFS4ERR_NOMATCHING_LAYOUT error is only returned when the client does not hold layouts and does not have valid deviceidmappings. </t> </list> </t>mappings.</t> </dd> </dl> <t> In processing the layout recall request, the client also varies its behavior based on the value of the clora_changed field. This field is used by the server to provide additional context for the reason why the layout is being recalled. A FALSE value for clora_changed indicates that no change in the layout is expected and the client may write modified data to the storage devices involved; this must be done prior to returning the layout via LAYOUTRETURN. A TRUE value for clora_changed indicates that the server is changing the layout. Examples of layout changes and reasons for a TRUE indication are the following: the metadata server is restriping the file or a permanent error has occurred on a storage device and the metadata server would like to provide a new layout for the file. Therefore, a clora_changed value of TRUE indicates some level of change for the layout and the clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> write and commit modified data to the storage devices. In this case, the client writes and commits data through the metadata server. </t> <t> See <xreftarget="layout_stateid"/>target="layout_stateid" format="default"/> for a description of how the lor_stateid field in the arguments is to be constructed. Note that the "seqid" field of lor_stateidMUST NOT<bcp14>MUST NOT</bcp14> be zero. See Sections <xref target="stateid"format="counter" />,format="counter"/>, <xref target="layout_stateid"format="counter" />,format="counter"/>, and <xref target="pnfs_operation_sequencing"format="counter" />format="counter"/> for a further discussion and requirements. </t> </section> <section toc="exclude" anchor="OP_CB_LAYOUTRECALL_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The client's processing for CB_LAYOUTRECALL is similar to CB_RECALL (recall of file delegations) in that the client responds to the request before actually returning layouts via the LAYOUTRETURN operation. While the client responds to the CB_LAYOUTRECALL immediately, the operation is not considered complete (i.e., considered pending) until all affected layouts are returned to the server via the LAYOUTRETURN operation. </t> <t> Before returning the layout to the server via LAYOUTRETURN, the client should wait for the response from in-process or in-flight READ, WRITE, or COMMIT operations that use the recalled layout. </t> <t> If the client is holding modified data that is affected by a recalled layout, the client has various options for writing the data to the server. As always, the client may write the data through the metadata server. In fact, the client may not have a choice other than writing to the metadata server when the clora_changed argument is TRUE and a new layout is unavailable from the server. However, the client may be able to write the modified data to the storage device if the clora_changed argument is FALSE; this needs to be done before returning the layout via LAYOUTRETURN. If the client were to obtain a new layout covering the modified data's byte-range, then writing to the storage devices is an available alternative. Note that before obtaining a new layout, the client must first return the original layout. </t> <t> In the case of modified data being written while the layout is held, the client must use LAYOUTCOMMIT operations at the appropriate time; as required LAYOUTCOMMIT must be done before the LAYOUTRETURN. If a large amount of modified data is outstanding, the client may send LAYOUTRETURNs for portions of the recalled layout; this allows the server to monitor the client's progress and adherence to the original recall request. However, the last LAYOUTRETURN in a sequence of returnsMUST<bcp14>MUST</bcp14> specify the full range being recalled (see <xref target="recall_robustness"/>format="default"/> for details). </t> <t> If a server needs to delete a device ID and there are layouts referring to the device ID, CB_LAYOUTRECALLMUST<bcp14>MUST</bcp14> be invoked to cause the client to return all layouts referring to the device ID before the server can delete the device ID. If the client does not return the affected layouts, the serverMAY<bcp14>MAY</bcp14> revoke the layouts. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_NOTIFY"title="Operationnumbered="true" toc="default"> <name>Operation 6: CB_NOTIFY - Notify Client of DirectoryChanges" >Changes</name> <section toc="exclude" anchor="OP_CB_NOTIFY_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ /* * Directory notification types. */ enum notify_type4 { NOTIFY4_CHANGE_CHILD_ATTRS = 0, NOTIFY4_CHANGE_DIR_ATTRS = 1, NOTIFY4_REMOVE_ENTRY = 2, NOTIFY4_ADD_ENTRY = 3, NOTIFY4_RENAME_ENTRY = 4, NOTIFY4_CHANGE_COOKIE_VERIFIER = 5 }; /* Changed entry information. */ struct notify_entry4 { component4 ne_file; fattr4 ne_attrs; }; /* Previous entry information */ struct prev_entry4 { notify_entry4 pe_prev_entry; /* what READDIR returned for this entry */ nfs_cookie4 pe_prev_entry_cookie; }; struct notify_remove4 { notify_entry4 nrm_old_entry; nfs_cookie4 nrm_old_entry_cookie; }; struct notify_add4 { /* * Information on object * possibly renamed over. */ notify_remove4nad_old_entry<1>;nad_old_entry<1>; notify_entry4 nad_new_entry; /* what READDIR would have returned for this entry */ nfs_cookie4nad_new_entry_cookie<1>;nad_new_entry_cookie<1>; prev_entry4nad_prev_entry<1>;nad_prev_entry<1>; bool nad_last_entry; }; struct notify_attr4 { notify_entry4 na_changed_entry; }; struct notify_rename4 { notify_remove4 nrn_old_entry; notify_add4 nrn_new_entry; }; struct notify_verifier4 { verifier4 nv_old_cookieverf; verifier4 nv_new_cookieverf; }; /* * Objects of typenotify_<>4notify_<>4 and *notify_device_<>4notify_device_<>4 are encoded in this. */ typedef opaquenotifylist4<>;notifylist4<>; struct notify4 { /* composed from notify_type4 or notify_deviceid_type4 */ bitmap4 notify_mask; notifylist4 notify_vals; }; struct CB_NOTIFY4args { stateid4 cna_stateid; nfs_fh4 cna_fh; notify4cna_changes<>;cna_changes<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_NOTIFY4res { nfsstat4 cnr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_NOTIFY operation is used by the server to send notifications to clients about changes to delegated directories. The registration of notifications for the directories occurs when the delegation is established using GET_DIR_DELEGATION. These notifications are sent over the backchannel. The notification is sent once the original request has been processed on the server. The server will send an array of notifications for changes that might have occurred in the directory. The notifications are sent as list of pairs of bitmaps and values. See <xref target="fattr4"/>format="default"/> for a description of how NFSv4.1 bitmaps work. </t> <t> If the server has more notifications than can fit in the CB_COMPOUND request, itSHOULD<bcp14>SHOULD</bcp14> send a sequence of serial CB_COMPOUND requests so that the client's view of the directory does not become confused. For example, if the server indicates that a file named "foo" is added and that the file "foo" is removed, the order in which the client receives these notifications needs to be the same as the order in which the corresponding operations occurred on the server. </t> <t> If the client holding the delegation makes any changes in the directory that cause files or sub-directories to be added or removed, the server will notify that client of the resulting change(s). If the client holding the delegation is making attribute or cookie verifier changes only, the server does not need to send notifications to that client. The server will send the following information for each operation:<list style="hanging"> <t hangText="NOTIFY4_ADD_ENTRY"><vspace /></t> <dl newline="true" spacing="normal"> <dt>NOTIFY4_ADD_ENTRY</dt> <dd> The server will send information about the new directory entry being created along with the cookie for that entry. The entry information (data type notify_add4) includes the component name of the entry and attributes. The server will send this type of entry when a file is actually being created, when an entry is being added to a directory as a result of a rename across directories (see below), and when a hard link is being created to an existing file. If this entry is added to the end of the directory, the server will set the nad_last_entry flag to TRUE. If the file is added such that there is at least one entry before it, the server will also return the previous entry information (nad_prev_entry, a variable-length array of up to one element. If the array is of zero length, there is no previous entry), along with its cookie. This is to help clients find the right location in their file name caches and directory caches where this entry should be cached. If the new entry's cookie is available, it will be in the nad_new_entry_cookie (another variable-length array of up to one element) field. If the addition of the entry causes another entry to be deleted (which can only happen in the rename case) atomically with the addition, then information on this entry is reported in nad_old_entry.</t> <t hangText="NOTIFY4_REMOVE_ENTRY"><vspace /></dd> <dt>NOTIFY4_REMOVE_ENTRY</dt> <dd> The server will send information about the directory entry being deleted. The server will also send the cookie value for the deleted entry so that clients can get to the cached information for this entry.</t> <t hangText="NOTIFY4_RENAME_ENTRY"><vspace /></dd> <dt>NOTIFY4_RENAME_ENTRY</dt> <dd> The server will send information about both the old entry and the new entry. This includes the name and attributes for each entry. In addition, if the rename causes the deletion of an entry (i.e., the case of a file renamed over), then this is reported in nrn_new_new_entry.nad_old_entry. This notification is only sent if both entries are in the same directory. If the rename is across directories, the server will send a remove notification to one directory and an add notification to the other directory, assuming both have a directory delegation.</t> <t hangText="NOTIFY4_CHANGE_CHILD_ATTRS/NOTIFY4_CHANGE_DIR_ATTRS"><vspace /></dd> <dt>NOTIFY4_CHANGE_CHILD_ATTRS/NOTIFY4_CHANGE_DIR_ATTRS</dt> <dd> The client will use the attribute mask to inform the server of attributes for which it wants to receive notifications. This change notification can be requested for changes to the attributes of the directory as well as changes to any file's attributes in the directory by using two separate attribute masks. The client cannot ask for change attribute notification for a specific file. One attribute mask covers all the files in the directory. Upon any attribute change, the server will send back the values of changed attributes. Notifications might not make sense for some file system-wide attributes, and it is up to the server to decide which subset it wants to support. The client can negotiate the frequency of attribute notifications by letting the server know how often it wants to be notified of an attribute change. The server will return supported notification frequencies or an indication that no notification is permitted for directory or child attributes by setting the dir_notif_delay and dir_entry_notif_delay attributes, respectively.</t> <t hangText="NOTIFY4_CHANGE_COOKIE_VERIFIER"><vspace /></dd> <dt>NOTIFY4_CHANGE_COOKIE_VERIFIER</dt> <dd> If the cookie verifier changes while a client is holding a delegation, the server will notify the client so that it can invalidate its cookies and re-send a READDIR to get the new set of cookies.</t> </list> </t></dd> </dl> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_PUSH_DELEG"title="Operationnumbered="true" toc="default"> <name>Operation 7: CB_PUSH_DELEG - Offer Previously Requested Delegation toClient" >Client</name> <section toc="exclude" anchor="OP_CB_PUSH_DELEG_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct CB_PUSH_DELEG4args { nfs_fh4 cpda_fh; open_delegation4 cpda_delegation; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_PUSH_DELEG_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_PUSH_DELEG4res { nfsstat4 cpdr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_PUSH_DELEG_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> CB_PUSH_DELEG is used by the server both to signal to the client that the delegation it wants (previously indicated via a want established from an OPEN or WANT_DELEGATION operation) is available and to simultaneously offer the delegation to the client. The client has the choice of accepting the delegation by returning NFS4_OK to the server, delaying the decision to accept the offered delegation by returning NFS4ERR_DELAY, or permanently rejecting the offer of the delegation by returning NFS4ERR_REJECT_DELEG. When a delegation is rejected in this fashion, the want previously established is permanently deleted and the delegation is subject to acquisition by another client. </t> </section> <section toc="exclude" anchor="OP_CB_PUSH_DELEG_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the client does return NFS4ERR_DELAY and there is a conflicting delegation request, the serverMAY<bcp14>MAY</bcp14> process it at the expense of the client that returned NFS4ERR_DELAY. The client's want will not be cancelled, butMAY<bcp14>MAY</bcp14> be processed behind other delegation requests or registered wants. </t> <t> When a client returns a status other than NFS4_OK, NFS4ERR_DELAY, or NFS4ERR_REJECT_DELAY, the want remains pending, although servers may decide to cancel the want by sending a CB_WANTS_CANCELLED. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_RECALL_ANY"title="Operationnumbered="true" toc="default"> <name>Operation 8: CB_RECALL_ANY - Keep Any N RecallableObjects" >Objects</name> <section toc="exclude" anchor="OP_CB_RECALL_ANY_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ const RCA4_TYPE_MASK_RDATA_DLG = 0; const RCA4_TYPE_MASK_WDATA_DLG = 1; const RCA4_TYPE_MASK_DIR_DLG = 2; const RCA4_TYPE_MASK_FILE_LAYOUT = 3; const RCA4_TYPE_MASK_BLK_LAYOUT = 4; const RCA4_TYPE_MASK_OBJ_LAYOUT_MIN = 8; const RCA4_TYPE_MASK_OBJ_LAYOUT_MAX = 9; const RCA4_TYPE_MASK_OTHER_LAYOUT_MIN = 12; const RCA4_TYPE_MASK_OTHER_LAYOUT_MAX = 15; struct CB_RECALL_ANY4args { uint32_t craa_objects_to_keep; bitmap4 craa_type_mask; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALL_ANY_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_RECALL_ANY4res { nfsstat4 crar_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALL_ANY_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The server may decide that it cannot hold all of the state for recallable objects, such as delegations and layouts, without running out of resources. In such a case, while not optimal, the server is free to recall individual objects to reduce the load. </t> <t> Because the general purpose of such recallable objects as delegations is to eliminate client interaction with the server, the server cannot interpret lack of recent use as indicating that the object is no longer useful. The absence of visible use is consistent with a delegation keeping potential operations from being sent to the server. In the case of layouts, while it is true that the usefulness of a layout is indicated by the use of the layout when storage devices receive I/O requests, because there is no mandate that a storage device indicate to the metadata server any past or present use of a layout, the metadata server is not likely to know which layouts are good candidates to recall in response to low resources. </t> <t> In order to implement an effective reclaim scheme for such objects, the server's knowledge of available resources must be used to determine when objects must be recalled with the clients selecting the actual objects to be returned. </t> <t> Server implementations may differ in their resource allocation requirements. For example, one server may share resources among all classes of recallable objects, whereas another may use separate resource pools for layouts and for delegations, or further separate resources by types of delegations. </t> <t> When a given resource pool is over-utilized, the server can send a CB_RECALL_ANY to clients holding recallable objects of the types involved, allowing it to keep a certain number of such objects and return any excess. A mask specifies which types of objects are to be limited. The client chooses, based on its own knowledge of current usefulness, which of the objects in that class should be returned. </t> <t> A number of bits are defined. For some of these, ranges are defined and it is up to the definition of the storage protocol to specify how these are to be used. There are ranges reserved for object-based storage protocols and for other experimental storage protocols. An RFC defining such a storage protocol needs to specify how particular bits within its range are to be used. For example, it may specify a mapping between attributes of the layout (read vs. write, size of area) and the bit to be used, or it may define a field in the layout where the associated bit position is made available by the server to the client.<list style='hanging'> <t hangText='RCA4_TYPE_MASK_RDATA_DLG'></t><t><dl newline="true" spacing="normal"> <dt>RCA4_TYPE_MASK_RDATA_DLG</dt> <dd> The client is to return OPEN_DELEGATE_READ delegations on non-directory file objects.</t> <t hangText='RCA4_TYPE_MASK_WDATA_DLG'> </t> <t></dd> <dt>RCA4_TYPE_MASK_WDATA_DLG</dt> <dd> The client is to return OPEN_DELEGATE_WRITE delegations on regular file objects.</t> <t hangText='RCA4_TYPE_MASK_DIR_DLG'> </t> <t></dd> <dt>RCA4_TYPE_MASK_DIR_DLG</dt> <dd> The client is to return directory delegations.</t> <t hangText='RCA4_TYPE_MASK_FILE_LAYOUT'> </t> <t></dd> <dt>RCA4_TYPE_MASK_FILE_LAYOUT</dt> <dd> The client is to return layouts of type LAYOUT4_NFSV4_1_FILES.</t> <t hangText='RCA4_TYPE_MASK_BLK_LAYOUT'> </t> <t></dd> <dt>RCA4_TYPE_MASK_BLK_LAYOUT</dt> <dd> See <xreftarget='RFC5663' />target="RFC5663" format="default"/> for a description.</t> <t hangText='RCA4_TYPE_MASK_OBJ_LAYOUT_MIN</dd> <dt>RCA4_TYPE_MASK_OBJ_LAYOUT_MIN toRCA4_TYPE_MASK_OBJ_LAYOUT_MAX'> </t> <t>RCA4_TYPE_MASK_OBJ_LAYOUT_MAX</dt> <dd> See <xreftarget='RFC5664' />target="RFC5664" format="default"/> for a description.</t> <t hangText='RCA4_TYPE_MASK_OTHER_LAYOUT_MIN</dd> <dt>RCA4_TYPE_MASK_OTHER_LAYOUT_MIN toRCA4_TYPE_MASK_OTHER_LAYOUT_MAX'> </t> <t>RCA4_TYPE_MASK_OTHER_LAYOUT_MAX</dt> <dd> This range is reserved for telling the client to recall layouts of experimental or site-specific layout types (see <xreftarget='layouttype4'/>). </t> </list> </t>target="layouttype4" format="default"/>). </dd> </dl> <t> When a bit is set in the type mask that corresponds to an undefined type of recallable object, NFS4ERR_INVALMUST<bcp14>MUST</bcp14> be returned. When a bit is set that corresponds to a defined type of object but the client does not support an object of the type, NFS4ERR_INVALMUST NOT<bcp14>MUST NOT</bcp14> be returned. Future minor versions of NFSv4 may expand the set of valid type mask bits. </t> <t> CB_RECALL_ANY specifies a count of objects that the client may keep as opposed to a count that the client must return. This is to avoid a potential race between a CB_RECALL_ANY that had a count of objects to free with a set of client-originated operations to return layouts or delegations. As a result of the race, the client and server would have differing ideas as to how many objects to return. Hence, the client could mistakenly free too many. </t> <t> If resource demands prompt it, the server may send another CB_RECALL_ANY with a lower count, even if it has not yet received an acknowledgment from the client for a previous CB_RECALL_ANY with the same type mask. Although the possibility exists that these will be received by the client in an order different from the order in which they were sent, any such permutation of the callback stream is harmless. It is the job of the client to bring down the size of the recallable object set in line with each CB_RECALL_ANY received, and until that obligation is met, it cannot be cancelled or modified by any subsequent CB_RECALL_ANY for the same type mask. Thus, if the server sends two CB_RECALL_ANYs, the effect will be the same as if the lower count was sent, whatever the order of recall receipt. Note that this means that a server may not cancel the effect of a CB_RECALL_ANY by sending another recall with a higher count. When a CB_RECALL_ANY is received and the count is already within the limit set or is above a limit that the client is working to get down to, that callback has no effect. </t> <t> Servers are generally free to deny recallable objects when insufficient resources are available. Note that the effect of such a policy is implicitly to give precedence to existing objects relative to requested ones, with the result that resources might not be optimally used. To prevent this, servers are well advised to make the point at which they start sending CB_RECALL_ANY callbacks somewhat below that at which they cease to give out new delegations and layouts. This allows the client to purge its less-used objects whenever appropriate and so continue to have its subsequent requests given new resources freed up by object returns. </t> </section> <section toc="exclude" anchor="OP_CB_RECALL_ANY_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The client can choose to return any type of object specified by the mask. If a server wishes to limit the use of objects of a specific type, it should only specify that type in the mask it sends. Should the client fail to return requested objects, it is up to the server to handle this situation, typically by sending specific recalls (i.e., sending CB_RECALL operations) to properly limit resource usage. The server should give the client enough time to return objects before proceeding to specific recalls. This time should not be less than the lease period. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_RECALLABLE_OBJ_AVAIL"title="Operationnumbered="true" toc="default"> <name>Operation 9: CB_RECALLABLE_OBJ_AVAIL - Signal Resources for RecallableObjects" >Objects</name> <section toc="exclude" anchor="OP_CB_RECALLABLE_OBJ_AVAIL_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ typedef CB_RECALL_ANY4args CB_RECALLABLE_OBJ_AVAIL4args;</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALLABLE_OBJ_AVAIL_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_RECALLABLE_OBJ_AVAIL4res { nfsstat4 croa_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALLABLE_OBJ_AVAIL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> CB_RECALLABLE_OBJ_AVAIL is used by the server to signal the client that the server has resources to grant recallable objects that might previously have been denied by OPEN, WANT_DELEGATION, GET_DIR_DELEG, or LAYOUTGET. </t> <t> The argument craa_objects_to_keep means the total number of recallable objects of the types indicated in the argument type_mask that the server believes it can allow the client to have, including the number of such objects the client already has. A client that tries to acquire more recallable objects than the server informs it can have runs the risk of having objects recalled. </t> <t> The server is not obligated to reserve the difference between the number of the objects the client currently has and the value of craa_objects_to_keep, nor does delaying the reply to CB_RECALLABLE_OBJ_AVAIL prevent the server from using the resources of the recallable objects for another purpose. Indeed, if a client responds slowly to CB_RECALLABLE_OBJ_AVAIL, the server might interpret the client as having reduced capability to manage recallable objects, and so cancel or reduce any reservation it is maintaining on behalf of the client. Thus, if the client desires to acquire more recallable objects, it needs to reply quickly to CB_RECALLABLE_OBJ_AVAIL, and then send the appropriate operations to acquire recallable objects. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_RECALL_SLOT"title="Operationnumbered="true" toc="default"> <name>Operation 10: CB_RECALL_SLOT - Change Flow ControlLimits" >Limits</name> <section toc="exclude" anchor="OP_CB_RECALL_SLOT_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct CB_RECALL_SLOT4args { slotid4 rsa_target_highest_slotid; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALL_SLOT_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_RECALL_SLOT4res { nfsstat4 rsr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_RECALL_SLOT_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_RECALL_SLOT operation requests the client to return session slots, and if applicable, transport credits (e.g., RDMA credits for connections associated with the operations channel) of the session's fore channel. CB_RECALL_SLOT specifies rsa_target_highest_slotid, the value of the target highest slot ID the server wants for the session. The clientMUST<bcp14>MUST</bcp14> then progress toward reducing the session's highest slot ID to the target value. </t> <t> If the session has only non-RDMA connections associated with its operations channel, then the client need only wait for all outstanding requests with a slot ID>> rsa_target_highest_slotid to complete, then send a single COMPOUND consisting of a single SEQUENCE operation, with the sa_highestslot field set to rsa_target_highest_slotid. If there are RDMA-based connections associated with operation channel, then the client needs to also send enough zero-length "RDMA Send" messages to take the total<!-- Please leave this use of "Send" capitalized in order to denote an artifact particular to RDMA-based communication. Thanks. -->RDMA credit count to rsa_target_highest_slotid + 1 or below. </t> </section> <section toc="exclude" anchor="OP_CB_RECALL_SLOT_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> If the client fails to reduce highest slot it has on the fore channel to what the server requests, the server can force the issue by asserting flow control on the receive side of all connections bound to the fore channel, and then finish servicing all outstanding requests that are in slots greater than rsa_target_highest_slotid. Once that is done, the server can then open the flow control, and any time the client sends a new request on a slot greater than rsa_target_highest_slotid, the server can return NFS4ERR_BADSLOT. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_SEQUENCE"title="Operationnumbered="true" toc="default"> <name>Operation 11: CB_SEQUENCE - Supply Backchannel Sequencing andControl" >Control</name> <section toc="exclude" anchor="OP_CB_SEQUENCE_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct referring_call4 { sequenceid4 rc_sequenceid; slotid4 rc_slotid; }; struct referring_call_list4 { sessionid4 rcl_sessionid; referring_call4rcl_referring_calls<>;rcl_referring_calls<>; }; struct CB_SEQUENCE4args { sessionid4 csa_sessionid; sequenceid4 csa_sequenceid; slotid4 csa_slotid; slotid4 csa_highest_slotid; bool csa_cachethis; referring_call_list4csa_referring_call_lists<>;csa_referring_call_lists<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_SEQUENCE_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_SEQUENCE4resok { sessionid4 csr_sessionid; sequenceid4 csr_sequenceid; slotid4 csr_slotid; slotid4 csr_highest_slotid; slotid4 csr_target_highest_slotid; }; union CB_SEQUENCE4res switch (nfsstat4 csr_status) { case NFS4_OK: CB_SEQUENCE4resok csr_resok4; default: void; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_SEQUENCE_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_SEQUENCE operation is used to manage operational accounting for the backchannel of the session on which a request is sent. The contents include the session ID to which this request belongs, the slot ID and sequence ID used by the server to implement session request control and exactly once semantics, and exchanged slot ID maxima that are used to adjust the size of the reply cache. In each CB_COMPOUND request, CB_SEQUENCEMUST<bcp14>MUST</bcp14> appear once andMUST<bcp14>MUST</bcp14> be the first operation. The error NFS4ERR_SEQUENCE_POSMUST<bcp14>MUST</bcp14> be returned when CB_SEQUENCE is found in any position in a CB_COMPOUND beyond the first. If any other operation is in the first position of CB_COMPOUND, NFS4ERR_OP_NOT_IN_SESSIONMUST<bcp14>MUST</bcp14> be returned. </t> <t> See <xreftarget="OP_SEQUENCE_DESCRIPTION"/>target="OP_SEQUENCE_DESCRIPTION" format="default"/> for a description of how slots are processed. </t> <t> If csa_cachethis is TRUE, then the server is requesting that the client cache the reply in the callback reply cache. The clientMUST<bcp14>MUST</bcp14> cache the reply (see <xref target="optional_reply_caching"/>).format="default"/>). </t> <t> The csa_referring_call_lists array is the list of COMPOUND requests, identified by session ID, slot ID, and sequence ID. These are requests that the client previously sent to the server. These previous requests created state that some operation(s) in the same CB_COMPOUND as the csa_referring_call_lists are identifying. A session ID is included because leased state is tied to a client ID, and a client ID can have multiple sessions. See <xref target="sessions_callback_races"/>.format="default"/>. </t> <t> The value of the csa_sequenceid argument relative to the cached sequence ID on the slot falls into one of three cases.<list style="symbols"> <t></t> <ul spacing="normal"> <li> If the difference between csa_sequenceid and the client's cached sequence ID at the slot ID is two (2) or more, or if csa_sequenceid is less than the cached sequence ID (accounting for wraparound of the unsigned sequence ID value), then the clientMUST<bcp14>MUST</bcp14> return NFS4ERR_SEQ_MISORDERED.</t> <t></li> <li> If csa_sequenceid and the cached sequence ID are the same, this is a retry, and the client returns the CB_COMPOUND request's cached reply.</t> <t></li> <li> If csa_sequenceid is one greater (accounting for wraparound) than the cached sequence ID, then this is a new request, and the slot's sequence ID is incremented. The operations subsequent to CB_SEQUENCE, if any, are processed. If there are no other operations, the only other effects are to cache the CB_SEQUENCE reply in the slot, maintain the session's activity, and when the server receives the CB_SEQUENCE reply, renew the lease of state related to the client ID.</t> </list> </t></li> </ul> <t> If the server reuses a slot ID and sequence ID for a completely different request, the clientMAY<bcp14>MAY</bcp14> treat the request as if it is a retry of what it has already executed. The clientMAY<bcp14>MAY</bcp14> however detect the server's illegal reuse and return NFS4ERR_SEQ_FALSE_RETRY. </t> <t> If CB_SEQUENCE returns an error, then the state of the slot (sequence ID, cached reply)MUST NOT<bcp14>MUST NOT</bcp14> change. See <xreftarget="optional_reply_caching"/>target="optional_reply_caching" format="default"/> for the conditions when the error NFS4ERR_RETRY_UNCACHED_REP might be returned. </t> <t> The client returns two "highest_slotid" values: csr_highest_slotid and csr_target_highest_slotid. The former is the highest slot ID the client will accept in a future CB_SEQUENCE operation, andSHOULD NOT<bcp14>SHOULD NOT</bcp14> be less than the value of csa_highest_slotid (but see <xref target="Slot_Identifiers_and_Server_Reply_Cache"/>format="default"/> for an exception). The latter is the highest slot ID the client would prefer the server use on a future CB_SEQUENCE operation. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_WANTS_CANCELLED"title="Operationnumbered="true" toc="default"> <name>Operation 12: CB_WANTS_CANCELLED - Cancel Pending DelegationWants " >Wants</name> <section toc="exclude" anchor="OP_CB_WANTS_CANCELLED_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct CB_WANTS_CANCELLED4args { bool cwca_contended_wants_cancelled; bool cwca_resourced_wants_cancelled; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_WANTS_CANCELLED_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_WANTS_CANCELLED4res { nfsstat4 cwcr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_WANTS_CANCELLED_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_WANTS_CANCELLED operation is used to notify the client that some or all of the wants it registered for recallable delegations and layouts have been cancelled. </t> <t> If cwca_contended_wants_cancelled is TRUE, this indicates that the server will not be pushing to the client any delegations that become available after contention passes. </t> <t> If cwca_resourced_wants_cancelled is TRUE, this indicates that the server will not notify the client when there are resources on the server to grant delegations or layouts. </t> <t> After receiving a CB_WANTS_CANCELLED operation, the client is free to attempt to acquire the delegations or layouts it was waiting for, and possibly re-register wants. </t> </section> <section toc="exclude" anchor="OP_CB_WANTS_CANCELLED_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> When a client has an OPEN, WANT_DELEGATION, or GET_DIR_DELEGATION request outstanding, when a CB_WANTS_CANCELLED is sent, the server may need to make clear to the client whether a promise to signal delegation availability happened before the CB_WANTS_CANCELLED and is thus covered by it, or after the CB_WANTS_CANCELLED in which case it was not covered by it. The server can make this distinction by putting the appropriate requests into the list of referring calls in the associated CB_SEQUENCE. </t> </section> </section><!-- Copyright (C) The Internet Society (2006) --> <!-- Copyright (C) The IETF Trust (2007-2008) --><section anchor="OP_CB_NOTIFY_LOCK"title="Operationnumbered="true" toc="default"> <name>Operation 13: CB_NOTIFY_LOCK - Notify Client of Possible LockAvailability" >Availability</name> <section toc="exclude" anchor="OP_CB_NOTIFY_LOCK_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ struct CB_NOTIFY_LOCK4args { nfs_fh4 cnla_fh; lock_owner4 cnla_lock_owner; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_LOCK_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_NOTIFY_LOCK4res { nfsstat4 cnlr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_LOCK_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The server can use this operation to indicate that a byte-range lock for the given file and lock-owner, previously requested by the client via an unsuccessful LOCK operation, might be available. </t> <t> This callback is meant to be used by servers to help reduce the latency of blocking locks in the case where they recognize that a client that has been polling for a blocking byte-range lock may now be able to acquire the lock. If the server supports this callback for a given file, itMUST<bcp14>MUST</bcp14> set the OPEN4_RESULT_MAY_NOTIFY_LOCK flag when responding to successful opens for that file. This does not commit the server to the use of CB_NOTIFY_LOCK, but the client may use this as a hint to decide how frequently to poll for locks derived from that open. </t> <t> If an OPEN operation results in an upgrade, in which the stateid returned has an "other" value matching that of a stateid already allocated, with a new "seqid" indicating a change in the lock being represented, then the value of the OPEN4_RESULT_MAY_NOTIFY_LOCK flag when responding to that new OPEN controls handling from that point going forward. When parallel OPENs are done on the same file and open-owner, the ordering of the "seqid" fields of the returned stateids (subject to wraparound) are to be used to select the controlling value of the OPEN4_RESULT_MAY_NOTIFY_LOCK flag. </t> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_LOCK_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> The serverMUST NOT<bcp14>MUST NOT</bcp14> grant the byte-range lock to the client unless and until it receives a LOCK operation from the client. Similarly, the client receiving this callback cannot assume that it now has the lock or that a subsequent LOCK operation for the lock will be successful. </t> <t> The server is not required to implement this callback, and even if it does, it is not required to use it in any particular case. Therefore, the client must still rely on polling for blocking locks, as described in <xreftarget="blocking_locks"/>.target="blocking_locks" format="default"/>. </t> <t> Similarly, the client is not required to implement this callback, and even it does, is still free to ignore it. Therefore, the serverMUST NOT<bcp14>MUST NOT</bcp14> assume that the client will act based on the callback. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_NOTIFY_DEVICEID"title="Operationnumbered="true" toc="default"> <name>Operation 14: CB_NOTIFY_DEVICEID - Notify Client of Device IDChanges" >Changes</name> <section toc="exclude" anchor="OP_CB_NOTIFY_DEVICEID_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ /* * Device notification types. */ enum notify_deviceid_type4 { NOTIFY_DEVICEID4_CHANGE = 1, NOTIFY_DEVICEID4_DELETE = 2 }; /* For NOTIFY4_DEVICEID4_DELETE */ struct notify_deviceid_delete4 { layouttype4 ndd_layouttype; deviceid4 ndd_deviceid; }; /* For NOTIFY4_DEVICEID4_CHANGE */ struct notify_deviceid_change4 { layouttype4 ndc_layouttype; deviceid4 ndc_deviceid; bool ndc_immediate; }; struct CB_NOTIFY_DEVICEID4args { notify4cnda_changes<>;cnda_changes<>; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_DEVICEID_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ struct CB_NOTIFY_DEVICEID4res { nfsstat4 cndr_status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_NOTIFY_DEVICEID_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> The CB_NOTIFY_DEVICEID operation is used by the server to send notifications to clients about changes to pNFS device IDs. The registration of device ID notifications is optional and is done via GETDEVICEINFO. These notifications are sent over the backchannel once the original request has been processed on the server. The server will send an array of notifications, cnda_changes, as a list of pairs of bitmaps and values. See <xref target="fattr4"/>format="default"/> for a description of how NFSv4.1 bitmaps work. </t> <t> As with CB_NOTIFY (<xreftarget="OP_CB_NOTIFY_DESCRIPTION"/>),target="OP_CB_NOTIFY_DESCRIPTION" format="default"/>), it is possible the server has more notifications than can fit in a CB_COMPOUND, thus requiring multiple CB_COMPOUNDs. Unlike CB_NOTIFY, serialization is not an issue because unlike directory entries, device IDs cannot be re-used after being deleted (<xref target="device_ids"/>).format="default"/>). </t> <t> All device ID notifications contain a device ID and a layout type. The layout type is necessary because two different layout types can share the same device ID, and the common device ID can have completely different mappings for each layout type. </t> <t> The server will send the following notifications:<list style="hanging"> <t hangText="NOTIFY_DEVICEID4_CHANGE"><vspace /></t> <dl newline="true" spacing="normal"> <dt>NOTIFY_DEVICEID4_CHANGE</dt> <dd> A previously provided device-ID-to-device-address mapping has changed and the client uses GETDEVICEINFO to obtain the updated mapping. The notification is encoded in a value of data type notify_deviceid_change4. This data type also contains a boolean field, ndc_immediate, which if TRUE indicates that the change will be enforced immediately, and so the client might not be able to complete any pending I/O to the device ID. If ndc_immediate is FALSE, then for an indefinite time, the client can complete pending I/O. After pending I/O is complete, the clientSHOULD<bcp14>SHOULD</bcp14> get the new device-ID-to-device-address mappings before sending new I/O requests to the storage devices addressed by the device ID.</t> <t hangText="NOTIFY4_DEVICEID_DELETE"><vspace /></dd> <dt>NOTIFY4_DEVICEID_DELETE</dt> <dd> <t> Deletes a device ID from the mappings. This notificationMUST NOT<bcp14>MUST NOT</bcp14> be sent if the client has a layout that refers to the device ID. In other words, if the server is sending a delete device ID notification, one of the following is true for layouts associated with the layout type:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The client never had a layout referring to that device ID.</t> <t></li> <li> The client has returned all layouts referring to that device ID.</t> <t></li> <li> The server has revoked all layouts referring to that device ID.</t> </list></li> </ul> <t> The notification is encoded in a value of data type notify_deviceid_delete4. After a server deletes a device ID, itMUST NOT<bcp14>MUST NOT</bcp14> reuse that device ID for the same layout type until the client ID is deleted. </t></list> </t></dd> </dl> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="OP_CB_ILLEGAL"title="Operationnumbered="true" toc="default"> <name>Operation 10044: CB_ILLEGAL - Illegal CallbackOperation" >Operation</name> <section toc="exclude" anchor="OP_CB_ILLEGAL_ARGUMENT"title="ARGUMENT"> <figure> <artwork>numbered="true"> <name>ARGUMENT</name> <sourcecode type="xdr"><![CDATA[ void;</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_ILLEGAL_RESULT"title="RESULT"> <figure> <artwork>numbered="true"> <name>RESULT</name> <sourcecode type="xdr"><![CDATA[ /* * CB_ILLEGAL: Response for illegal operation numbers */ struct CB_ILLEGAL4res { nfsstat4 status; };</artwork> </figure>]]></sourcecode> </section> <section toc="exclude" anchor="OP_CB_ILLEGAL_DESCRIPTION"title="DESCRIPTION">numbered="true"> <name>DESCRIPTION</name> <t> This operation is a placeholder for encoding a result to handle the case of the server sending an operation code within CB_COMPOUND that is not defined in the NFSv4.1 specification. See <xreftarget="OP_CB_COMPOUND_DESCRIPTION"/>target="OP_CB_COMPOUND_DESCRIPTION" format="default"/> for more details. </t> <t> The status field of CB_ILLEGAL4resMUST<bcp14>MUST</bcp14> be set to NFS4ERR_OP_ILLEGAL. </t> </section> <section toc="exclude" anchor="OP_CB_ILLEGAL_IMPLEMENTATION"title="IMPLEMENTATION">numbered="true"> <name>IMPLEMENTATION</name> <t> A server will probably not send an operation with code OP_CB_ILLEGAL, but if it does, the response will be CB_ILLEGAL4res just as it would be with any other invalid operation code. Note that if the client gets an illegal operation code that is not OP_ILLEGAL, and if the client checks for legal operation codes during the XDR decode phase, then an instance of data type CB_ILLEGAL4res will not be returned. </t> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --></section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="SECCON"title="Security Considerations">numbered="true" toc="default"> <name>Security Considerations</name> <t> Historically, the authentication model of NFS was based on the entire machine being the NFS client, with the NFS server trusting the NFS client to authenticate the end-user. The NFS server in turn shared its files only to specific clients, as identified by the client's source network address. Given this model, the AUTH_SYS RPC security flavor simply identified the end-user using the client to the NFS server. When processing NFS responses, the client ensured that the responses came from the same network address and port number to which the request was sent. While such a model is easy to implement and simple to deploy and use, it is unsafe. Thus, NFSv4.1 implementations areREQUIRED<bcp14>REQUIRED</bcp14> to support a security model that uses end-to-end authentication, where an end-user on a client mutually authenticates (via cryptographic schemes that do not expose passwords or keys in the clear on the network) to a principal on an NFS server. Consideration is also given to the integrity and privacy of NFS requests and responses. The issues of end-to-end mutual authentication, integrity, and privacy are discussed in <xref target="RPCSEC_GSS_and_Security_Services"/>.format="default"/>. There are specific considerations when using Kerberos V5 as described in <xreftarget="krb5_sec_consider"/>.target="krb5_sec_consider" format="default"/>. </t> <t> Note that beingREQUIRED<bcp14>REQUIRED</bcp14> to implement does not meanREQUIRED<bcp14>REQUIRED</bcp14> to use; AUTH_SYS can be used by NFSv4.1 clients and servers. However, AUTH_SYS is merely anOPTIONAL<bcp14>OPTIONAL</bcp14> security flavor in NFSv4.1, and so interoperability via AUTH_SYS is not assured. </t> <t> For reasons of reduced administration overhead, better performance, and/or reduction of CPU utilization, users of NFSv4.1 implementations might decline to use security mechanisms that enable integrity protection on each remote procedure call and response. The use of mechanisms without integrity leaves the user vulnerable to a man-in-the-middle of the NFS client and server that modifies the RPC request and/or the response. While implementations are free to provide the option to use weaker security mechanisms, there are three operations in particular that warrant the implementation overriding user choices.<list style='symbols'> <t></t> <ul spacing="normal"> <li> The first two such operations are SECINFO and SECINFO_NO_NAME. It isRECOMMENDED<bcp14>RECOMMENDED</bcp14> that the client send both operations such that they are protected with a security flavor that has integrity protection, such as RPCSEC_GSS with either the rpc_gss_svc_integrity or rpc_gss_svc_privacy service. Without integrity protection encapsulating SECINFO and SECINFO_NO_NAME and their results, a man-in-the-middle could modify results such that the client might select a weaker algorithm in the set allowed by the server, making the client and/or server vulnerable to further attacks.</t> <t></li> <li> The third operation thatSHOULD<bcp14>SHOULD</bcp14> use integrity protection is any GETATTR for the fs_locations and fs_locations_info attributes, in order to mitigate the severity of a man-in-the-middle attack. The attack has two steps. First the attacker modifies the unprotected results of some operation to return NFS4ERR_MOVED. Second, when the client follows up with a GETATTR for the fs_locations or fs_locations_info attributes, the attacker modifies the results to cause the client to migrate its traffic to a server controlled by the attacker. With integrity protection, this attack is mitigated.</t> </list> </t></li> </ul> <t> Relative to previous NFS versions, NFSv4.1 has additional security considerations for pNFS (see Sections <xref target="security_considerations_pnfs"format="counter" />format="counter"/> and <xref target="file_security_considerations"format="counter" />),format="counter"/>), locking and session state (see <xreftarget="protect_state_change"/>),target="protect_state_change" format="default"/>), and state recovery during grace period (see <xreftarget="reclaim_security_considerations"/>).target="reclaim_security_considerations" format="default"/>). With respect to locking and session state, if SP4_SSV state protection is being used, <xreftarget="rpcsec_ssv_consider"/>target="rpcsec_ssv_consider" format="default"/> has specific security considerations for the NFSv4.1 client and server. </t> <t> Security considerations for lock reclaim differ between the two different situations in which state reclaim is to be done. The server failure situation is discussed in <xreftarget="reclaim_security_considerations"/>target="reclaim_security_considerations" format="default"/>, while the per-fs state reclaim done in support of migration/replication is discussed in <xreftarget="SEC11-EFF-lock-sc"/>.target="SEC11-EFF-lock-sc" format="default"/>. </t> <t> The use of the multi-server namespace features described in <xreftarget="NEW11"/>target="NEW11" format="default"/> raises the possibility that requests to determine the set of network addresses corresponding to a given server might be interfered with or have their responses modified in flight. In light of this possibility, the following considerations should betaken note of: <list style="symbols">noted: </t> <ul spacing="normal"> <li> <t> When DNS is used to convert server names to addresses and DNSSEC <xreftarget="RFC4033"/>target="RFC4033" format="default"/> is not available, the validity of the network addresses returned generally cannot be relied upon. However, when combined with a trusted resolver, DNS over TLS <xreftarget="RFC7858"/>,target="RFC7858" format="default"/> and DNS over HTTPS <xreftarget="RFC8484"/>target="RFC8484" format="default"/> canalsobe relied upon to provide valid address resolutions.<vspace blankLines="1"/></t> <t> In situations in which the validity of the provided addresses cannot be relied upon and the client uses RPCSEC_GSS to access the designated server, it is possible for mutual authentication to discover invalid server addresses as long as the RPCSEC_GSS implementation used does not use insecure DNS queries to canonicalize the hostname components of the service principal names, as explained in <xreftarget="RFC4120"/>.target="RFC4120" format="default"/>. </t><t></li> <li> The fetching of attributes containing file system location informationSHOULD<bcp14>SHOULD</bcp14> be performed using integrity protection. It is important to note here that a client making a request of this sort without using integrity protection needs be aware of the negative consequences of doing so, which can lead to invalidhost nameshostnames or network addresses being returned. These include cases in which the client is directed to a server under the control of an attacker, who might get access to data written or provide incorrect values for data read. In light of this, the client needs to recognize that using such returned location information to access an NFSv4 server without use of RPCSEC_GSS(i.e.(i.e., by using AUTH_SYS) poses dangers as it can result in the client interacting with such an attacker-controlledserver,server without any authentication facilities to verify the server's identity.</t> <t></li> <li> Despite the fact that it is a requirement that implementations provide "support" for use of RPCSEC_GSS, it cannot be assumed that use of RPCSEC_GSS is always available between any particular client-server pair.</t> <t></li> <li> When a client has the network addresses of a server but not the associatedhost names,hostnames, that would interfere with its ability to use RPCSEC_GSS.</t> </list> </t></li> </ul> <t> In light of the above, a serverSHOULD<bcp14>SHOULD</bcp14> present file system location entries that correspond to file systems on other servers using ahost name.hostname. This would allow the client to interrogate the fs_locations on the destination server to obtain trunking information (as well as replica information) using integrity protection, validating the name provided while assuring that the response has not been modified in flight. </t> <t> When RPCSEC_GSS is not available on a server, the client needs to be aware of the fact that the location entries are subject to modification in flight and so cannot be relied upon. In the case of a client being directed to another server after NFS4ERR_MOVED, this could vitiate the authentication provided by the use of RPCSEC_GSS on the designated destination server. Even when RPCSEC_GSS authentication is available on the destination, the server might still properly authenticate as the server to which the client was erroneously directed. Without a way to decide whether the server is a valid one, the client can only determine, using RPCSEC_GSS, that the server corresponds to the name provided, with no basis for trusting that server. As a result, the clientSHOULD NOT<bcp14>SHOULD NOT</bcp14> use such unverified location entries as a basis for migration, even though RPCSEC_GSS might be available on the destination. </t> <t> When a file system location attribute is fetched upon connecting with an NFS server, itSHOULD,<bcp14>SHOULD</bcp14>, as stated above, be done with integrity protection. When this not possible, it is generally best for the client to ignore trunking and replica information or simply not fetch the location information for these purposes. </t> <t> When location information cannot be verified, it can be subjected to additional filtering to prevent the client from being inappropriately directed. For example, if a range of network addresses can be determined that assure that the servers and clients using AUTH_SYS are subject to the appropriate set of constraints(e.g.(e.g., physical network isolation, administrative controls on the operating systems used), then network addresses in the appropriate range can be used with others discarded or restricted in their use of AUTH_SYS. </t> <t> To summarize considerations regarding the use of RPCSEC_GSS in fetching location information, we need to consider the following possibilities for requests to interrogate location information, with interrogation approaches on the referring and destination servers arrived at separately:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The use of integrity protection isRECOMMENDED<bcp14>RECOMMENDED</bcp14> in all cases, since the absence of integrity protection exposes the client to the possibility of the results being modified in transit.</t> <t></li> <li> The use of requests issued without RPCSEC_GSS(i.e.(i.e., usingAUTH_SYSAUTH_SYS, which has no provision to avoid modification of data in flight), while undesirable and a potential security exposure, may not be avoidable in all cases. Where the use of the returned information cannot be avoided, it is made subject to filtering as described above to eliminate the possibility that the client would treat an invalid address as if it were a NFSv4 server. The specifics will vary depending on the degree of network isolation and whether the request is to the referring or destination servers.</t> </list> </t></li> </ul> <t> Even if such requests are not interfered with in flight, it is possible for a compromised server to direct the client to use inappropriate servers, such as those under the control of the attacker. It is not clear that being directed to such servers represents a greater threat to the client than the damage that could be done by the compromised server itself. However, it is possible that some sorts of transient server compromises might betaken advantage ofexploited to direct a client to a server capable of doing greater damage over a longer time. One useful step to guard against this possibility is to issue requests to fetch location data using RPCSEC_GSS, even if no mapping to an RPCSEC_GSS principal is available. In this case, RPCSEC_GSS would not be used, as it typically is, to identify the client principal to the server, but rather to make sure (via RPCSEC_GSS mutual authentication) that the server being contacted is the one intended. </t> <t> Similar considerations apply if the threat to be avoided is the redirection of client traffic to inappropriate(i.e.(i.e., poorly performing) servers. In both cases, there is no reason for the information returned to depend on the identity of the client principal requesting it, while the validity of the server information, which has the capability to affect all client principals, is of considerable importance. </t> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="ianaconsider"title="IANA Considerations">numbered="true" toc="default"> <name>IANA Considerations</name> <t> This section uses terms that are defined in <xreftarget="RFC5226"/>.target="RFC8126" format="default"/>. </t> <section anchor="Iana-actions"title="IANA Actions Needed">numbered="true" toc="default"> <name>IANA Actions</name> <t> This update does not require any modificationofof, or additionstoto, registry entries or registry rules associated with NFSv4.1. However, since this documentis intended to obsolete RFC5661, it will be necessary forobsoletes RFC 5661, IANAto updatehas updated all registry entries and registry rules references thatpointspoint toRFC5661RFC 5661 to point to this document instead. </t> <t> Previous actions by IANA related to NFSv4.1 are listed in the remaining subsections of <xreftarget="ianaconsider"/>.target="ianaconsider" format="default"/>. </t> </section> <section anchor="namedattributesiana"title="Namednumbered="true" toc="default"> <name>Named AttributeDefinitions">Definitions</name> <t> IANA created a registry called the "NFSv4 Named Attribute Definitions Registry". </t> <t> The NFSv4.1 protocol supports the association of a file with zero or more named attributes. The namespace identifiers for these attributes are defined as string names. The protocol does not define the specific assignment of the namespace for these file attributes. The IANA registry promotes interoperability where common interests exist. While application developers are allowed to define and use attributes as needed, they are encouraged to register the attributes with IANA. </t> <t> Such registered named attributes are presumed to apply to all minor versions of NFSv4, including those defined subsequently to the registration. If the named attribute is intended to be limited to specific minor versions, this will be clearly stated in the registry's assignment. </t> <t> All assignments to the registry are made on a First Come First Served basis, perSection 4.1 of<xreftarget="RFC5226"/>.target="RFC8126" sectionFormat="of" section="4.4"/>. The policy for each assignment is Specification Required, perSection 4.1 of<xreftarget="RFC5226"/>.target="RFC8126" sectionFormat="of" section="4.6"/>. </t> <t> Under the NFSv4.1 specification, the name of a named attribute can in theory be up to2^322<sup>32</sup> - 1 bytes in length, but in practice NFSv4.1 clients and servers will be unable to handle a string that long. IANA should reject any assignment request with a named attribute that exceeds 128 UTF-8 characters. To give the IESG the flexibility to set up bases of assignment of Experimental Use and Standards Action, the prefixes of "EXPE" and "STDS" are Reserved. The named attribute with a zero-length name is Reserved. </t> <t> The prefix "PRIV" is designated for Private Use. A site that wants to make use of unregistered named attributes without risk of conflicting with an assignment in IANA's registry should use the prefix "PRIV" in all of its named attributes. </t> <t> Because some NFSv4.1 clients and servers have case-insensitive semantics, the fifteen additional lower case and mixed case permutations of each of "EXPE", "PRIV", and "STDS" are Reserved (e.g., "expe", "expE", "exPe", etc. are Reserved). Similarly, IANA must not allow two assignments that would conflict if both named attributes were converted to a common case. </t> <t> The registry of named attributes is a list of assignments, each containing three fields for each assignment.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> A US-ASCII string name that is the actual name of the attribute. This name must be unique. This string name can be 1 to 128 UTF-8 characters long.</t> <t></li> <li> A reference to the specification of the named attribute. The reference can consume up to 256 bytes (or more if IANA permits).</t> <t></li> <li> The point of contact of the registrant. The point of contact can consume up to 256 bytes (or more if IANA permits).</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> There is no initial registry. </t> </section> <sectiontitle="Updating Registrations">numbered="true" toc="default"> <name>Updating Registrations</name> <t> The registrant is always permitted to update the point of contact field. Any other change will require Expert Review or IESG Approval. </t> </section> </section> <section anchor="notifyiana"title="Devicenumbered="true" toc="default"> <name>Device IDNotifications">Notifications</name> <t> IANA created a registry called the "NFSv4 Device ID Notifications Registry". </t> <t> The potential exists for new notification types to be added to the CB_NOTIFY_DEVICEID operation (see <xref target="OP_CB_NOTIFY_DEVICEID"/>).format="default"/>). This can be done via changes to the operations that register notifications, or by adding new operations to NFSv4. This requires a new minor version of NFSv4, and requires a Standards Track document from the IETF. Another way to add a notification is to specify a new layout type (see <xref target="pnfsiana"/>).format="default"/>). </t> <t> Hence, all assignments to the registry are made on a Standards Action basis perSection 4.1 of<xreftarget="RFC5226"/>,target="RFC8126" section="4.6" sectionFormat="of" format="default"/>, with Expert Review required. </t> <t> The registry is a list of assignments, each containing five fields per assignment.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The name of the notification type. This name must have the prefix "NOTIFY_DEVICEID4_". This name must be unique.</t> <t></li> <li> The value of the notification. IANA will assign this number, and the request from the registrant will use TBD1 instead of an actual value. IANAMUST<bcp14>MUST</bcp14> use a whole number that can be no higher than2^32-1,2<sup>32</sup>-1, and should be the next available value. The value assigned must be unique. A Designated Expert must be used to ensure that when the name of the notification type and its value are added to the NFSv4.1 notify_deviceid_type4 enumerated data type in the NFSv4.1 XDR description(<xref target="RFC5662"/>),<xref target="RFC5662" format="default"/>, the result continues to be a valid XDR description.</t> <t></li> <li> The Standards Track RFC(s) that describe the notification. If the RFC(s) have not yet been published, the registrant will use RFCTBD2, RFCTBD3, etc. instead of an actual RFC number.</t> <t></li> <li> How the RFC introduces the notification. This is indicated by a single US-ASCII value. If the value is N, it means a minor revision to the NFSv4 protocol. If the value is L, it means a new pNFS layout type. Other values can be used with IESG Approval.</t> <t></li> <li> The minor versions of NFSv4 that are allowed to use the notification. While these are numeric values, IANA will not allocate and assign them; the author of the relevant RFCs with IESG Approval assigns these numbers. Each time there is a new minor version of NFSv4 approved, a Designated Expert should review the registry to make recommended updates as needed.</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> The initial registry is in <xreftarget="devnotelist"/>.target="devnotelist" format="default"/>. Note that the next available value is zero. </t><texttable title="Initial<table anchor="devnotelist" align="center"> <name>Initial Device ID NotificationAssignments" anchor='devnotelist'> <ttcol>Notification Name</ttcol> <ttcol>Value</ttcol> <ttcol>RFC</ttcol> <ttcol>How</ttcol> <ttcol>Minor Versions</ttcol> <c>NOTIFY_DEVICEID4_CHANGE</c> <c>1</c> <c>RFC5661</c> <c>N</c> <c>1</c> <c>NOTIFY_DEVICEID4_DELETE</c> <c>2</c> <c>RFC5661</c> <c>N</c> <c>1</c> </texttable> </section> <section title="Updating Registrations">Assignments</name> <thead> <tr> <th align="left">Notification Name</th> <th align="left">Value</th> <th align="left">RFC</th> <th align="left">How</th> <th align="left">Minor Versions</th> </tr> </thead> <tbody> <tr> <td align="left">NOTIFY_DEVICEID4_CHANGE</td> <td align="left">1</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> <tr> <td align="left">NOTIFY_DEVICEID4_DELETE</td> <td align="left">2</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> </tbody> </table> </section> <section numbered="true" toc="default"> <name>Updating Registrations</name> <t> The update of a registration will require IESG Approval on the advice of a Designated Expert. </t> </section> </section> <section anchor="recalliana"title="Objectnumbered="true" toc="default"> <name>Object RecallTypes">Types</name> <t> IANA created a registry called the "NFSv4 Recallable Object Types Registry". </t> <t> The potential exists for new object types to be added to the CB_RECALL_ANY operation (see <xref target="OP_CB_RECALL_ANY"/>).format="default"/>). This can be done via changes to the operations that add recallable types, or by adding new operations to NFSv4. This requires a new minor version of NFSv4, and requires a Standards Track document from IETF. Another way to add a new recallable object is to specify a new layout type (see <xref target="pnfsiana"/>).format="default"/>). </t> <t> All assignments to the registry are made on a Standards Action basis perSection 4.1 of<xreftarget="RFC5226"/>,target="RFC8126" sectionFormat="of" section="4.9"/>, with Expert Review required. </t> <t> Recallable object types are 32-bit unsigned numbers. There are no Reserved values. Values in the range 12 through 15, inclusive, are designated for Private Use. </t> <t> The registry is a list of assignments, each containing five fields per assignment.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The name of the recallable object type. This name must have the prefix "RCA4_TYPE_MASK_". The name must be unique.</t> <t></li> <li> The value of the recallable object type. IANA will assign this number, and the request from the registrant will use TBD1 instead of an actual value. IANAMUST<bcp14>MUST</bcp14> use a whole number that can be no higher than2^32-1,2<sup>32</sup>-1, and should be the next available value. The value must be unique. A Designated Expert must be used to ensure that when the name of the recallable type and its value are added to the NFSv4 XDR description <xreftarget="RFC5662"/>,target="RFC5662" format="default"/>, the result continues to be a valid XDR description.</t> <t></li> <li> The Standards Track RFC(s) that describe the recallable object type. If the RFC(s) have not yet been published, the registrant will use RFCTBD2, RFCTBD3, etc. instead of an actual RFC number.</t> <t></li> <li> How the RFC introduces the recallable object type. This is indicated by a single US-ASCII value. If the value is N, it means a minor revision to the NFSv4 protocol. If the value is L, it means a new pNFS layout type. Other values can be used with IESG Approval.</t> <t></li> <li> The minor versions of NFSv4 that are allowed to use the recallable object type. While these are numeric values, IANA will not allocate and assign them; the author of the relevant RFCs with IESG Approval assigns these numbers. Each time there is a new minor version of NFSv4 approved, a Designated Expert should review the registry to make recommended updates as needed.</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> The initial registry is in <xreftarget="recalllist"/>.target="recalllist" format="default"/>. Note that the next available value is five. </t><texttable title="Initial<table anchor="recalllist" align="center"> <name>Initial Recallable Object TypeAssignments" anchor='recalllist'> <ttcol>RecallableAssignments</name> <thead> <tr> <th align="left">Recallable Object TypeName</ttcol> <ttcol>Value</ttcol> <ttcol>RFC</ttcol> <ttcol>How</ttcol> <ttcol>Minor Versions</ttcol> <c>RCA4_TYPE_MASK_RDATA_DLG</c> <c>0</c> <c>RFC 5661</c> <c>N</c> <c>1</c> <c>RCA4_TYPE_MASK_WDATA_DLG</c> <c>1</c> <c>RFC 5661</c> <c>N</c> <c>1</c> <c>RCA4_TYPE_MASK_DIR_DLG</c> <c>2</c> <c>RFC 5661</c> <c>N</c> <c>1</c> <c>RCA4_TYPE_MASK_FILE_LAYOUT</c> <c>3</c> <c>RFC 5661</c> <c>N</c> <c>1</c> <c>RCA4_TYPE_MASK_BLK_LAYOUT</c> <c>4</c> <c>RFC 5661</c> <c>L</c> <c>1</c> <c>RCA4_TYPE_MASK_OBJ_LAYOUT_MIN</c> <c>8</c> <c>RFC 5661</c> <c>L</c> <c>1</c> <c>RCA4_TYPE_MASK_OBJ_LAYOUT_MAX</c> <c>9</c> <c>RFC 5661</c> <c>L</c> <c>1</c> </texttable> </section> <section title="Updating Registrations">Name</th> <th align="left">Value</th> <th align="left">RFC</th> <th align="left">How</th> <th align="left">Minor Versions</th> </tr> </thead> <tbody> <tr> <td align="left">RCA4_TYPE_MASK_RDATA_DLG</td> <td align="left">0</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> <tr> <td align="left">RCA4_TYPE_MASK_WDATA_DLG</td> <td align="left">1</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> <tr> <td align="left">RCA4_TYPE_MASK_DIR_DLG</td> <td align="left">2</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> <tr> <td align="left">RCA4_TYPE_MASK_FILE_LAYOUT</td> <td align="left">3</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> <tr> <td align="left">RCA4_TYPE_MASK_BLK_LAYOUT</td> <td align="left">4</td> <td align="left">RFC 8881</td> <td align="left">L</td> <td align="left">1</td> </tr> <tr> <td align="left">RCA4_TYPE_MASK_OBJ_LAYOUT_MIN</td> <td align="left">8</td> <td align="left">RFC 8881</td> <td align="left">L</td> <td align="left">1</td> </tr> <tr> <td align="left">RCA4_TYPE_MASK_OBJ_LAYOUT_MAX</td> <td align="left">9</td> <td align="left">RFC 8881</td> <td align="left">L</td> <td align="left">1</td> </tr> </tbody> </table> </section> <section numbered="true" toc="default"> <name>Updating Registrations</name> <t> The update of a registration will require IESG Approval on the advice of a Designated Expert. </t> </section> </section> <section anchor="pnfsiana"title="Layout Types">numbered="true" toc="default"> <name>Layout Types</name> <t> IANA created a registry called the "pNFS Layout Types Registry". </t> <t> All assignments to the registry are made on a Standards Action basis, with Expert Review required. </t> <t> Layout types are 32-bit numbers. The value zero is Reserved. Values in the range 0x80000000 to 0xFFFFFFFF inclusive are designated for Private Use. IANA will assign numbers from the range 0x00000001 to 0x7FFFFFFF inclusive. </t> <t> The registry is a list of assignments, each containing five fields.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The name of the layout type. This name must have the prefix "LAYOUT4_". The name must be unique.</t> <t></li> <li> The value of the layout type. IANA will assign this number, and the request from the registrant will use TBD1 instead of an actual value. The value assigned must be unique. A Designated Expert must be used to ensure that when the name of the layout type and its value are added to the NFSv4.1 layouttype4 enumerated data type in the NFSv4.1 XDR description(<xref target="RFC5662"/>),<xref target="RFC5662" format="default"/>, the result continues to be a valid XDR description.</t> <t></li> <li> The Standards Track RFC(s) that describe the notification. If the RFC(s) have not yet been published, the registrant will use RFCTBD2, RFCTBD3, etc. instead of an actual RFC number. Collectively, the RFC(s) must adhere to the guidelines listed in <xreftarget="layout_guidelines"/>. </t> <t>target="layout_guidelines" format="default"/>. </li> <li> How the RFC introduces the layout type. This is indicated by a single US-ASCII value. If the value is N, it means a minor revision to the NFSv4 protocol. If the value is L, it means a new pNFS layout type. Other values can be used with IESG Approval.</t> <t></li> <li> The minor versions of NFSv4 that are allowed to use the notification. While these are numeric values, IANA will not allocate and assign them; the author of the relevant RFCs with IESG Approval assigns these numbers. Each time there is a new minor version of NFSv4 approved, a Designated Expert should review the registry to make recommended updates as needed.</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> The initial registry is in <xreftarget="layoutlist"/>.target="layoutlist" format="default"/>. </t><texttable title="Initial<table anchor="layoutlist" align="center"> <name>Initial Layout TypeAssignments" anchor='layoutlist'> <ttcol>LayoutAssignments</name> <thead> <tr> <th align="left">Layout TypeName</ttcol> <ttcol>Value</ttcol> <ttcol>RFC</ttcol> <ttcol>How</ttcol> <ttcol>Minor Versions</ttcol> <c>LAYOUT4_NFSV4_1_FILES</c> <c>0x1</c> <c>RFC 5661</c> <c>N</c> <c>1</c> <c>LAYOUT4_OSD2_OBJECTS</c> <c>0x2</c> <c>RFC 5664</c> <c>L</c> <c>1</c> <c>LAYOUT4_BLOCK_VOLUME</c> <c>0x3</c> <c>RFC 5663</c> <c>L</c> <c>1</c> <!-- [rfced] The IANA site lists this document (RFC 5661) as the reference for values 0x2 and 0x3, instead of RFCs 5664 and 5663, respectively. Does the IANA site need to be updated? [Eisler]: The IANA site needs to be updated. --> </texttable> </section> <section title="Updating Registrations">Name</th> <th align="left">Value</th> <th align="left">RFC</th> <th align="left">How</th> <th align="left">Minor Versions</th> </tr> </thead> <tbody> <tr> <td align="left">LAYOUT4_NFSV4_1_FILES</td> <td align="left">0x1</td> <td align="left">RFC 8881</td> <td align="left">N</td> <td align="left">1</td> </tr> <tr> <td align="left">LAYOUT4_OSD2_OBJECTS</td> <td align="left">0x2</td> <td align="left">RFC 5664</td> <td align="left">L</td> <td align="left">1</td> </tr> <tr> <td align="left">LAYOUT4_BLOCK_VOLUME</td> <td align="left">0x3</td> <td align="left">RFC 5663</td> <td align="left">L</td> <td align="left">1</td> </tr> </tbody> </table> </section> <section numbered="true" toc="default"> <name>Updating Registrations</name> <t> The update of a registration will require IESG Approval on the advice of a Designated Expert. </t> </section> <section anchor="layout_guidelines"title="Guidelinesnumbered="true" toc="default"> <name>Guidelines for Writing Layout TypeSpecifications">Specifications</name> <t> The author of a new pNFS layout specification must follow these steps to obtain acceptance of the layout type as a Standards Track RFC:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The author devises the new layout specification.</t></li> <li> <t> The new layout type specificationMUST,<bcp14>MUST</bcp14>, at a minimum:<list style='symbols'></t> <ul spacing="normal"> <li> <t> Define the contents of the layout-type-specific fields of the following data types:<list style='symbols'> <t></t> <ul spacing="normal"> <li> the da_addr_body field of the device_addr4 data type;</t> <t></li> <li> the loh_body field of the layouthint4 data type;</t> <t></li> <li> the loc_body field of layout_content4 data type (which in turn is the lo_content field of the layout4 data type);</t> <t></li> <li> the lou_body field of the layoutupdate4 data type;</t> </list> </t> <t></li> </ul> </li> <li> Describe or define the storage access protocol used to access the storage devices.</t> <t></li> <li> Describe whether revocation of layouts is supported.</t></li> <li> <t> At a minimum, describe the methods of recovery from:<list style="numbers"> <t></t> <ol spacing="normal" type="1"> <li> Failure and restart for client, server, storage device.</t> <t></li> <li> Lease expiration from perspective of the active client, server, storage device.</t> <t></li> <li> Loss of layout state resulting in fencing of client access to storage devices (for an example, see <xref target="lease_expiration_mds"/>). </t> </list> </t>format="default"/>). </li> </ol> </li> <li> <t> Include an IANA considerations section, which will in turn include:<list style="symbols"> <t></t> <ul spacing="normal"> <li> A request to IANA for a new layout type per <xreftarget="pnfsiana"/>. </t> <t>target="pnfsiana" format="default"/>. </li> <li> A list of requests to IANA for any new recallable object types for CB_RECALL_ANY; each entry is to be presented in the form described in <xreftarget="recalliana"/>. </t> <t>target="recalliana" format="default"/>. </li> <li> A list of requests to IANA for any new notification values for CB_NOTIFY_DEVICEID; each entry is to be presented in the form described in <xreftarget="notifyiana"/>. </t> </list> </t> <t>target="notifyiana" format="default"/>. </li> </ul> </li> <li> Include a security considerations section. This sectionMUST<bcp14>MUST</bcp14> explain how the NFSv4.1 authentication, authorization, and access-control models are preserved. That is, if a metadata server would restrict a READ or WRITE operation, how would pNFS via the layout similarly restrict a corresponding input or output operation?</t> </list> </t> <t></li> </ul> </li> <li> The author documents the new layout specification as an Internet-Draft.</t> <t></li> <li> The author submits the Internet-Draft for review through the IETF standards process as defined in "The Internet Standards Process--Revision 3" (BCP9).9 <xref target="BCP09" format="default"/>). The new layout specification will be submitted for eventual publication as a Standards Track RFC.</t> <t></li> <li> The layout specification progresses through the IETF standards process.</t> </list> </t></li> </ol> </section> </section> <section anchor="path_var_iana"title="Pathnumbered="true" toc="default"> <name>Path VariableDefinitions">Definitions</name> <t> This section deals with the IANA considerations associated with the variable substitution feature for location names as described in <xref target="SEC11-fsli-item"/>.format="default"/>. As described there, variables subject to substitution consist of a domain name and a specific name within that domain, with the two separated by a colon. There are two sets of IANA considerations here:<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The list of variable names.</t> <t></li> <li> For each variable name, the list of possible values.</t> </list></li> </ol> <t> Thus, there will be one registry for the list of variable names, and possibly one registry for listing the values of each variable name. </t> <section anchor="path_variables_iana"title="Pathnumbered="true" toc="default"> <name>Path VariablesRegistry">Registry</name> <t> IANA created a registry called the "NFSv4 Path Variables Registry". </t> <section anchor="path_values_iana"title="Pathnumbered="true" toc="default"> <name>Path VariableValues">Values</name> <t> Variable names are of the form "${", followed by a domain name, followed by a colon (":"), followed by a domain-specific portion of the variable name, followed by "}". When the domain name is "ietf.org", all variables names must be registered with IANA on a Standards Action basis, with Expert Review required. Path variables with registered domain names neither part of nor equal to ietf.org are assigned on a Hierarchical Allocation basis (delegating to the domain owner) and thus of no concern to IANA, unless the domain owner chooses to register a variable name from his domain. If the domain owner chooses to do so, IANA will do so on a First Come First Serve basis. To accommodate registrants who do not have their own domain, IANA will accept requests to register variables with the prefix "${FCFS.ietf.org:" on a First Come First Served basis. Assignments on a First Come First Basis do not require Expert Review, unless the registrant also wants IANA to establish a registry for the values of the registered variable. </t> <t> The registry is a list of assignments, each containing three fields.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> The name of the variable. The name of this variable must start with a "${" followed by a registered domain name, followed by ":", or it must start with "${FCFS.ietf.org". The name must be no more than 64 UTF-8 characters long. The name must be unique.</t> <t></li> <li> For assignments made on Standards Action basis, the Standards Track RFC(s) that describe the variable. If the RFC(s) have not yet been published, the registrant will use RFCTBD1, RFCTBD2, etc. instead of an actual RFC number. Note that the RFCs do not have to be a part of an NFS minor version. For assignments made on a First Come First Serve basis, an explanation (consuming no more than 1024 bytes, or more if IANA permits) of the purpose of the variable. A reference to the explanation can be substituted.</t> <t></li> <li> The point of contact, including an email address. The point of contact can consume up to 256 bytes (or more if IANA permits). For assignments made on a Standards Action basis, the point of contact is always IESG.</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> The initial registry is in <xreftarget="varlist"/>.target="varlist" format="default"/>. </t><texttable title="Initial<table anchor="varlist" align="center"> <name>Initial List of PathVariables" anchor='varlist'> <ttcol>Variable Name</ttcol> <ttcol>RFC</ttcol> <ttcol>Point of Contact</ttcol> <c>${ietf.org:CPU_ARCH}</c> <c>RFC 5661</c> <c>IESG</c> <c>${ietf.org:OS_TYPE}</c> <c>RFC 5661</c> <c>IESG</c> <c>${ietf.org:OS_VERSION}</c> <c>RFC 5661</c> <c>IESG</c> </texttable>Variables</name> <thead> <tr> <th align="left">Variable Name</th> <th align="left">RFC</th> <th align="left">Point of Contact</th> </tr> </thead> <tbody> <tr> <td align="left">${ietf.org:CPU_ARCH}</td> <td align="left">RFC 8881</td> <td align="left">IESG</td> </tr> <tr> <td align="left">${ietf.org:OS_TYPE}</td> <td align="left">RFC 8881</td> <td align="left">IESG</td> </tr> <tr> <td align="left">${ietf.org:OS_VERSION}</td> <td align="left">RFC 8881</td> <td align="left">IESG</td> </tr> </tbody> </table> <t> IANA has created registries for the values of the variable names ${ietf.org:CPU_ARCH} and ${ietf.org:OS_TYPE}. See Sections <xref target="cpu_arch"format="counter" />format="counter"/> and <xref target="os_type"format="counter" />.format="counter"/>. </t> <t> For the values of the variable ${ietf.org:OS_VERSION}, no registry is needed as the specifics of the values of the variable will vary with the value of ${ietf.org:OS_TYPE}. Thus, values for ${ietf.org:OS_VERSION} are on a Hierarchical Allocation basis and are of no concern to IANA. </t> </section> <sectiontitle="Updating Registrations">numbered="true" toc="default"> <name>Updating Registrations</name> <t> The update of an assignment made on a Standards Action basis will require IESG Approval on the advice of a Designated Expert. </t> <t> The registrant can always update the point of contact of an assignment made on a First Come First Serve basis. Any other update will require Expert Review. </t> </section> </section> </section> <sectiontitle="Valuesanchor="cpu_arch" numbered="true" toc="default"> <name>Values for the ${ietf.org:CPU_ARCH}Variable" anchor="cpu_arch">Variable</name> <t> IANA created a registry called the "NFSv4 ${ietf.org:CPU_ARCH} Value Registry". </t> <t> Assignments to the registry are made on a First Come First Serve basis. The zero-length value of ${ietf.org:CPU_ARCH} is Reserved. Values with a prefix of "PRIV" are designated for Private Use. </t> <t> The registry is a list of assignments, each containing three fields.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> A value of the ${ietf.org:CPU_ARCH} variable. The value must be 1 to 32 UTF-8 characters long. The value must be unique.</t> <t></li> <li> An explanation (consuming no more than 1024 bytes, or more if IANA permits) of what CPU architecture the value denotes. A reference to the explanation can be substituted.</t> <t></li> <li> The point of contact, including an email address. The point of contact can consume up to 256 bytes (or more if IANA permits).</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> There is no initial registry. </t> </section> <sectiontitle="Updating Registrations">numbered="true" toc="default"> <name>Updating Registrations</name> <t> The registrant is free to update the assignment, i.e., change the explanation and/or point-of-contact fields. </t> </section> </section> <sectiontitle="Valuesanchor="os_type" numbered="true" toc="default"> <name>Values for the ${ietf.org:OS_TYPE}Variable" anchor="os_type">Variable</name> <t> IANA created a registry called the "NFSv4 ${ietf.org:OS_TYPE} Value Registry". </t> <t> Assignments to the registry are made on a First Come First Serve basis. The zero-length value of ${ietf.org:OS_TYPE} is Reserved. Values with a prefix of "PRIV" are designated for Private Use. </t> <t> The registry is a list of assignments, each containing three fields.<list style='numbers'> <t></t> <ol spacing="normal" type="1"> <li> A value of the ${ietf.org:OS_TYPE} variable. The value must be 1 to 32 UTF-8 characters long. The value must be unique.</t> <t></li> <li> An explanation (consuming no more than 1024 bytes, or more if IANA permits) of what CPU architecture the value denotes. A reference to the explanation can be substituted.</t> <t></li> <li> The point of contact, including an email address. The point of contact can consume up to 256 bytes (or more if IANA permits).</t> </list> </t></li> </ol> <sectiontitle="Initial Registry">numbered="true" toc="default"> <name>Initial Registry</name> <t> There is no initial registry. </t> </section> <sectiontitle="Updating Registrations">numbered="true" toc="default"> <name>Updating Registrations</name> <t> The registrant is free to update the assignment, i.e., change the explanation and/or point of contact fields. </t> </section> </section> </section> </section><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --></middle><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007) --> <!-- Copyright (C) The Internet Society (2006) --><back><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --> <references title="Normative References"> <reference anchor='RFC2119'> <front> <title abbrev='RFC Key Words'>Key words for use in RFCs to Indicate Requirement Levels</title> <author initials='S.' surname='Bradner' fullname='Scott Bradner'> <organization>Harvard University</organization> <address> <postal> <street>1350 Mass. Ave.</street> <street>Cambridge</street> <street>MA 02138</street></postal> <phone>- +1 617 495 3864</phone> <email>sob@harvard.edu</email></address></author> <date year='1997' month='March' /> </front> <seriesInfo name='BCP' value='14' /> <seriesInfo name='RFC' value='2119' /> <format type='TXT' target='http://www.rfc-editor.org/rfc/rfc2119.txt' /> </reference> <reference anchor='RFC4506'> <front> <title>XDR: External Data Representation Standard</title> <author initials='M.' surname='Eisler' fullname='M. Eisler' role='editor'> <organization /></author> <date year='2006' month='May' /> <abstract> <t><p>This document describes the External Data Representation Standard (XDR) protocol as it is currently deployed and accepted. This document obsoletes RFC 1832. [STANDARDS TRACK]</p></t></abstract></front> <seriesInfo name='STD' value='67' /> <seriesInfo name='RFC' value='4506' /> <format type='TXT' octets='55477' target='http://www.rfc-editor.org/rfc/rfc4506.txt' /> </reference> <reference anchor='RFC5531'> <front> <title> RPC: Remote Procedure Call Protocol Specification Version 2 </title> <author initials='R.' surname='Thurlow' fullname='R. Thurlow'> <organization /> </author> <date year='2009' month='May' /> <abstract> <t>This document describes the Open Network Computing (ONC) Remote Procedure Call (RPC) version 2 protocol as it is currently deployed and accepted. This document obsoletes RFC 1831. [STANDARDS TRACK]</t></abstract></front> <seriesInfo name='RFC' value='5531' /> <format type='TXT' octets='161720' target='ftp://ftp.isi.edu/in-notes/rfc5531.txt' /> </reference> <reference anchor='RFC2203'> <front> <title>RPCSEC_GSS Protocol Specification</title> <author initials='M.' surname='Eisler' fullname='Michael Eisler'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>M/S UCOS03</street> <street>2550 Garcia Avenue</street> <street>Mountain View</street> <street>CA 94043</street></postal> <phone>+1 (719) 599-9026</phone> <email>mre@eng.sun.com</email></address></author> <author initials='A.' surname='Chiu' fullname='Alex Chiu'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>M/S UMPK17-203</street> <street>2550 Garcia Avenue</street> <street>Mountain View</street> <street>CA 94043</street></postal> <phone>+1 (415) 786-6465</phone> <email>hacker@eng.sun.com</email></address></author> <author initials='L.' surname='Ling' fullname='Lin Ling'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>M/S UMPK17-201</street> <street>2550 Garcia Avenue</street> <street>Mountain View</street> <street>CA 94043</street></postal> <phone>+1 (415) 786-5084</phone> <email>lling@eng.sun.com</email></address></author> <date year='1997' month='September' /> <area>Security</area> <keyword>generic security service</keyword> <keyword>remote procedure call</keyword> <keyword>security</keyword> <abstract> <t> This memo describes an ONC/RPC security flavor that allows RPC protocols to access the Generic Security Services Application Programming Interface (referred to henceforth as GSS-API). </t></abstract></front> <seriesInfo name='RFC' value='2203' /> <format type='TXT' octets='50937' target='http://www.rfc-editor.org/rfc/rfc2203.txt' /> <format type='HTML' octets='64234' target='http://xml.resource.org/public/rfc/html/rfc2203.html' /> <format type='XML' octets='50069' target='http://xml.resource.org/public/rfc/xml/rfc2203.xml' /> </reference> <reference anchor='RFC4121'> <front> <title>The Kerberos Version 5 Generic Security Service Application Program Interface (GSS-API) Mechanism Version 2</title> <author initials='L.' surname='Zhu'> <organization>Microsoft</organization> </author> <author initials='K.' surname='Jaganathan'> <organization>Microsoft</organization> </author> <author initials='S.' surname='Hartman'> <organization>MIT</organization> </author> <date year='2005' month='July' /> <abstract> <t> RFC 1964 is updated and incremental changes are proposed in response to recent developments such as the introduction of Kerberos crypto-system framework. These changes support the inclusion of new crypto-systems, by defining new per-message tokens along with their encryption and checksum algorithms based on the crypto-system profiles. </t> </abstract> </front> <seriesInfo name='RFC' value='4121' /> <format type='TXT' target='http://www.rfc-editor.org/rfc/rfc4121.txt' /> </reference><references> <name>References</name> <references> <name>Normative References</name> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2119.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.4506.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5531.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2203.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.4121.xml"/> <referenceanchor="hardlink">anchor="hardlink" target="https://www.opengroup.org"> <front> <title abbrev="OpenGroup"> SectionGroup">Section 3.191 of Chapter 3 of Base Definitions of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2743.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5040.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5403.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5662.xml"/> <referenceanchor='RFC2743'> <front> <title abbrev='GSS-API'>Generic Security Service Application Program Interface Version 2, Update 1</title> <author initials='J.' surname='Linn' fullname='John Linn'> <organization>RSA Laboratories</organization> <address> <postal> <street>20 Crosby Drive</street> <city>Bedford</city> <region>MA</region> <code>01730</code> <country>US</country></postal> <phone>+1 781 687 7817</phone> <email>jlinn@rsasecurity.com</email></address></author> <date year='2000' month='January' /> <abstract> <t>The Generic Security Service Application Program Interface (GSS-API), Version 2, as defined in, provides security services to callers in a generic fashion, supportable with a range of underlying mechanisms and technologies and hence allowing source-level portability of applications to different environments. This specification defines GSS-API services and primitives at a level independent of underlying mechanism and programming language environment, and is to be complemented by other, related specifications:</t> <t>documents defining specific parameter bindings for particular language environments</t> <t>documents defining token formats, protocols, and procedures to be implemented in order to realize GSS-API services atop particular security mechanisms</t> <t>This memo obsoletesmaking specific, incremental changes in response to implementation experience and liaison requests. It is intended, therefore, that this memo or a successor version thereto will become the basis for subsequent progression of the GSS-API specification on the standards track.</t></abstract></front> <seriesInfo name='RFC' value='2743' /> <format type='TXT' octets='229418' target='http://www.rfc-editor.org/rfc/rfc2743.txt' /> </reference> <reference anchor='RDMAP'> <front> <title abbrev='RDMAP - WIP'>A Remote Direct Memory Access Protocol Specification </title> <author initials='R.' surname='Recio'> <organization>IBM Corporation</organization> </author> <author initials='B.' surname='Metzler'> <organization>IBM Corporation</organization> </author> <author initials='P.' surname='Culley'> <organization>Hewlett-Packard Company</organization> </author> <author initials='J.' surname='Hilland'> <organization>Hewlett-Packard Company</organization> </author> <author initials='D.' surname='Garcia'> <organization></organization> </author> <date year='2007' month='October' /> <abstract> <t> This document defines a Remote Direct Memory Access Protocol (RDMAP) that operates over the Direct Data Placement Protocol (DDP protocol). RDMAP provides read and write services directly to applications and enables data to be transferred directly into Upper Layer Protocol (ULP) buffers without intermediate data copies. It also enables a kernel bypass implementation. </t></abstract></front> <seriesInfo name='RFC' value='5040' /> <format type='TXT' target='http://www.rfc-editor.org/rfc/rfc5040.txt' /> </reference> <reference anchor='RFC5403'> <front> <title>RPCSEC_GSS Version 2</title> <author initials='M.' surname='Eisler' fullname='M. Eisler'> <organization /></author> <date year='2009' month='February' /> <abstract> <t>This document describes version 2 of the RPCSEC_GSS protocol. Version 2 is the same as version 1 (specified in RFC 2203) except that support for channel bindings has been added. RPCSEC_GSS allows remote procedure call (RPC) protocols to access the Generic Security Services Application Programming Interface (GSS-API). [STANDARDS TRACK]</t></abstract></front> <seriesInfo name='RFC' value='5403' /> <format type='TXT' octets='30812' target='ftp://ftp.isi.edu/in-notes/rfc5403.txt' /> </reference> <reference anchor='RFC5662'> <front> <title> Network File System (NFS) Version 4 Minor Version 1 External Data Representation Standard (XDR) Description </title> <author initials='S' surname='Shepler' fullname='Spencer Shepler' role='editor'> <organization /> </author> <author initials='M' surname='Eisler' fullname='Mike Eisler' role='editor'> <organization /> </author> <author initials='D' surname='Noveck' fullname='David Noveck' role='editor'> <organization /> </author> <date month='January' year='2010' /> <abstract><t>This Internet-Draft provides the XDR description for NFSv4 minor version one.</t></abstract> </front> <seriesInfo name='RFC' value='5662' /> </reference> <reference anchor="symlink">anchor="symlink" target="https://www.opengroup.org"> <front> <title>Section 3.372 of Chapter 3 of Base Definitions of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5665.xml"/> <referenceanchor='RFC5665'> <front> <title> IANA Considerations for Remote Procedure Call (RPC) Network Identifiers and Universal Address Formats </title> <author initials='M' surname='Eisler' fullname='Mike Eisler'> <organization /> </author> <date month='January' year='2010' /> <abstract> <t> IANA Considerations for RPC Net Identifiers and Universal Address Formats. </t> </abstract> </front> <seriesInfo name='RFC' value='5665' /> </reference> <reference anchor="read_atime">anchor="read_atime" target="https://www.opengroup.org"> <front> <title>Section 'read()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <referenceanchor="readdir_atime">anchor="readdir_atime" target="https://www.opengroup.org"> <front> <title>Section 'readdir()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <referenceanchor="write_atime">anchor="write_atime" target="https://www.opengroup.org"> <front> <title>Section 'write()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.3454.xml"/> <referenceanchor='RFC3454'> <front> <title>Preparation of Internationalized Strings ("stringprep")</title> <author initials='P.' surname='Hoffman' fullname='P. Hoffman'> <organization /></author> <author initials='M.' surname='Blanchet' fullname='M. Blanchet'> <organization /></author> <date year='2002' month='December' /> <abstract> <t> <p>This document describes a framework for preparing Unicode text strings in order to increase the likelihood that string input and string comparison work in ways that make sense for typical users throughout the world. The stringprep protocol is useful for protocol identifier values, company and personal names, internationalized domain names, and other text strings. This document does not specify how protocols should prepare text strings. Protocols must create profiles of stringprep in order to fully specify the processing options. [STANDARDS TRACK] </p> </t> </abstract> </front> <seriesInfo name='RFC' value='3454' /> <format type='TXT' octets='138684' target='http://www.rfc-editor.org/rfc/rfc3454.txt' /> </reference> <reference anchor="chmod">anchor="chmod" target="https://www.opengroup.org"> <front> <title>Section 'chmod()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <reference anchor="ISO.10646-1.1993"> <front> <title>Information Technology - Universal Multiple-octet coded Character Set (UCS) - Part 1: Architecture and Basic MultilingualPlane</title>Plane </title> <seriesInfo name="ISO" value="Standard 10646-1"/> <author> <organization>International Organization for Standardization </organization> </author> <date month="May"year="1993" /> </front> <seriesInfo name="ISO" value="Standard 10646-1" /> </reference> <reference anchor='RFC2277'> <front> <title abbrev='Charset Policy'> IETF Policy on Character Sets and Languages</title> <author initials='H.' surname='Alvestrand' fullname='Harald Tveit Alvestrand'> <organization>UNINETT</organization> <address> <postal> <street>P.O.Box 6883 Elgeseter</street> <street>N-7002 TRONDHEIM</street> <country>NORWAY</country></postal> <phone>+47 73 59 70 94</phone> <email>Harald.T.Alvestrand@uninett.no</email></address></author> <date year='1998' month='January' /> <area>Applications</area> <keyword>Internet Engineering Task Force</keyword> <keyword>character encoding</keyword></front> <seriesInfo name='BCP' value='18' /> <seriesInfo name='RFC' value='2277' /> <format type='TXT' octets='16622' target='http://www.rfc-editor.org/rfc/rfc2277.txt' /> <format type='HTML' octets='26556' target='http://xml.resource.org/public/rfc/html/rfc2277.html' /> <format type='XML' octets='15544' target='http://xml.resource.org/public/rfc/xml/rfc2277.xml' /> </reference> <reference anchor='RFC3491'> <front> <title>Nameprep: A Stringprep Profile for Internationalized Domain Names (IDN)</title> <author initials='P.' surname='Hoffman' fullname='P. Hoffman'> <organization /></author> <author initials='M.' surname='Blanchet' fullname='M. Blanchet'> <organization /></author> <date year='2003' month='March' /> <abstract> <t> <p>This document describes how to prepare internationalized domain name (IDN) labels in order to increase the likelihood that name input and name comparison work in ways that make sense for typical users throughout the world. This profile of the stringprep protocol is used as part of a suite of on-the-wire protocols for internationalizing the Domain Name System (DNS). [STANDARDS TRACK] </p> </t> </abstract>year="1993"/> </front><seriesInfo name='RFC' value='3491' /> <format type='TXT' octets='10316' target='http://www.rfc-editor.org/rfc/rfc3491.txt' /></reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2277.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.3491.xml"/> <referenceanchor="fcntl">anchor="fcntl" target="https://www.opengroup.org"> <front> <title>Section 'fcntl()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <referenceanchor="fsync">anchor="fsync" target="https://www.opengroup.org"> <front> <title>Section 'fsync()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <referenceanchor="passwd">anchor="passwd" target="https://www.opengroup.org"> <front> <title>Section 'getpwnam()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference> <referenceanchor="unlink">anchor="unlink" target="https://www.opengroup.org"> <front> <title>Section 'unlink()' of System Interfaces of The Open Group Base Specifications Issue 6 IEEE Std 1003.1, 2004 Edition, HTML Version(www.opengroup.org), ISBN 1931624232</title> <seriesInfo name="ISBN" value="1931624232"/> <author> <organization>The Open Group </organization> </author> <date year="2004"/> </front> </reference><!-- obsoleted by RFC 5531<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.4055.xml"/> <referenceanchor='RFC1831'>anchor="CSOR_AES" target="https://csrc.nist.gov/projects/computer-security-objects-register/algorithm-registration"> <front><title abbrev='Remote Procedure Call Protocol Version 2'>RPC: Remote Procedure Call Protocol Specification Version 2</title> <author initials='R.' surname='Srinivasan' fullname='Raj Srinivasan'> <organization>Sun Microsystems, Inc., ONC Technologies</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>M/S MTV-5-40</street> <city>Mountain View</city> <region>CA</region> <code>94043</code> <country>US</country></postal> <phone>+1 415 336 2478</phone> <facsimile>+1 415 336 6015</facsimile> <email>raj@eng.sun.com</email></address></author> <date year='1995' month='August' /> <abstract> <t>This document describes the ONC Remote Procedure Call (ONC RPC Version 2) protocol as it is currently deployed<title>Computer Security Objects Register </title> <author> <organization>National Institute of Standards andaccepted. "ONC" stands for "Open Network Computing".</t></abstract></front> <seriesInfo name='RFC' value='1831' /> <format type='TXT' octets='37798' target='ftp://ftp.isi.edu/in-notes/rfc1831.txt' />Technology </organization> </author> <date month="May" year="2016"/> </front> </reference>--><xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7861.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.4120.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.4033.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7858.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8000.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8166.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8267.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8484.xml"/> <referencegroup anchor="BCP09" target="https://www.rfc-editor.org/info/bcp9"> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2026.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7127.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5657.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.6410.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7100.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7475.xml"/> </referencegroup> </references> <references> <name>Informative References</name> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml3/reference.I-D.draft-roach-bis-documents-00.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.3530.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.1813.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2847.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2623.xml"/> <referenceanchor='RFC4055'>anchor="Chet"> <front><title> Additional Algorithms and Identifiers for RSA Cryptography for use in<title>Improving theInternet X.509 Public Key Infrastructure CertificatePerformance andCertificate Revocation List (CRL) Profile </title> <author initials='J.' surname='Schaad' fullname='J. Schaad'> <organization /></author> <author initials='B.' surname='Kaliski' fullname='B. Kaliski'> <organization /></author>Correctness of an NFS Server</title> <authorinitials='R.' surname='Housley' fullname='R. Housley'> <organization /></author>initials="C." surname="Juszczak" fullname="Chet Juszczak"> <organization>Digital Equipment Corporation</organization> </author> <dateyear='2005' month='June' />month="June" year="1990"/> <abstract><t><p>This document supplements RFC 3279. It describes the conventions for using the RSA Probabilistic Signature Scheme (RSASSA-PSS) signature algorithm,<t> Describes reply cache implementation that avoids work in theRSA Encryption Scheme - Optimal Asymmetric Encryption Padding (RSAES-OAEP) key transport algorithm and additional one-way hash functions withserver by handling duplicate requests. More important, though listed as a side-effect, thePublic-Key Cryptography Standards (PKCS) #1 version 1.5 signature algorithmreply cache aids in theInternet X.509 Public Key Infrastructure (PKI). Encoding formats, algorithm identifiers, and parameter formats are specified. [STANDARDS TRACK]</p>avoidance of destructive non- idempotent operation re-application -- improving correctness. </t> </abstract> </front><seriesInfo name='RFC' value='4055' /> <format type='TXT' octets='57479' target='http://www.rfc-editor.org/rfc/rfc4055.txt' /><refcontent>USENIX Conference Proceedings</refcontent> </reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.3232.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.1833.xml"/> <referenceanchor="CSOR_AES">anchor="rpc_xid_issues"> <front><title>Cryptographic Algorithm Object Registration </title> <author> <organization>National Institute of Standards and Technology </organization><title>RPC XID Issues</title> <author initials="R." surname="Werme" fullname="Ric Werme"> <organization>Digital Equipment Corporation</organization> </author> <datemonth="November" year="2007" />month="February" year="1996"/> <abstract> <t> The presentation provides implementation advice for ONC RPC transaction identifier (xid) generation. </t> </abstract> </front><seriesInfo name="URL" value="http://csrc.nist.gov/groups/ST/crypto_apps_infra/csor/algorithms.html" /><refcontent>USENIX Conference Proceedings</refcontent> </reference><?rfc include="reference.RFC.7861.xml"?> <?rfc include="reference.RFC.4120.xml"?> <?rfc include="reference.RFC.4033.xml"?> <?rfc include="reference.RFC.7858.xml"?> <?rfc include="reference.RFC.8000.xml"?> <?rfc include="reference.RFC.8166.xml"?> <?rfc include="reference.RFC.8267.xml"?> <?rfc include="reference.RFC.8484.xml"?> </references> <references title="Informative References"> <?rfc include="reference.I-D.roach-bis-documents.xml"?><xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.1094.xml"/> <referenceanchor='RFC3530'> <front> <title>Network File System (NFS) version 4 Protocol</title> <author initials="S." surname="Shepler" fullname="S. Shepler"> <organization>Sun Microsystems, Inc.</organization> </author> <author initials="B." surname="Callaghan" fullname="B. Callaghan"> <organization>Sun Microsystems, Inc.</organization> </author> <author initials="D." surname="Robinson" fullname="D. Robinson"> <organization>Sun Microsystems, Inc.</organization> </author> <author initials="R." surname="Thurlow" fullname="R. Thurlow"> <organization>Sun Microsystems, Inc.</organization> </author> <author initials="C." surname="Beame" fullname="C. Beame"> <organization>Hummingbird, Ltd.</organization> </author> <author initials="M." surname="Eisler" fullname="M. Eisler"> <organization>NetApp</organization> </author> <author initials="D." surname="Noveck" fullname="D. Noveck"> <organization>NetApp</organization> </author> <date year="2003" month="April"/> </front> <seriesInfo name="RFC" value="3530"/> <format type="TXT" octets="600988" target="http://www.rfc-editor.org/rfc/rfc3530.txt"/> </reference> <reference anchor='RFC1813'> <front> <title abbrev='NFSv3 Protocol'>NFS Version 3 Protocol Specification</title> <author initials='B.' surname='Callaghan' fullname='Brent Callaghan'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>Mailstop UMTV05-44</street> <city>Mountain View</city> <region>CA</region> <code>94043-1100</code> <country>US</country></postal> <phone>+1 415 336 1051</phone> <facsimile>+1 415 336 6015</facsimile> <email>brent.callaghan@eng.sun.com</email></address></author> <author initials='B.' surname='Pawlowski' fullname='Brian Pawlowski'> <organization>NetApp</organization> <address> <postal> <street>319 North Bernardo Ave.</street> <city>Mountain View</city> <region>CA</region> <code>94043</code> <country>US</country></postal> <phone>+1 415 428 5136</phone> <facsimile>+1 415 428 5151</facsimile> <email>beepy@netapp.com</email></address></author> <author initials='P.' surname='Staubach' fullname='Peter Staubach'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>Mailstop UMTV05-44</street> <city>Mountain View</city> <region>CA</region> <code>94043-1100</code> <country>US</country></postal> <phone>+1 415 336 5615</phone> <facsimile>+1 415 336 6015</facsimile> <email>peter.staubach@eng.sun.com</email></address></author> <date year='1995' month='June' /> <abstract> <t>This paper describes the NFSv3 protocol. This paper is provided so that people can write compatible implementations.</t></abstract></front> <seriesInfo name='RFC' value='1813' /> <format type='TXT' octets='229793' target='http://www.rfc-editor.org/rfc/rfc1813.txt' /> </reference> <reference anchor='RFC2847'> <front> <title>LIPKEY - A Low Infrastructure Public Key Mechanism Using SPKM</title> <author initials='M.' surname='Eisler' fullname='M. Eisler'> <organization /></author> <date year='2000' month='June' /> <abstract> <t><p>This memorandum describes a method whereby one can use GSS-API (Generic Security Service Application Program Interface) to supply a secure channel between a client and server, authenticating the client with a password, and a server with a public key certificate. [STANDARDS TRACK] </p></t> </abstract> </front> <seriesInfo name='RFC' value='2847' /> <format type='TXT' octets='50045' target='http://www.rfc-editor.org/rfc/rfc2847.txt' /> </reference> <reference anchor='RFC2623'> <front> <title abbrev='NFS Security, RPCSEC_GSS, and Kerberos V5'> NFS Version 2 and Version 3 Security Issues and the NFS Protocol's Use of RPCSEC_GSS and Kerberos V5 </title> <author initials='M.' surname='Eisler' fullname='Mike Eisler'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>5565 Wilson Road</street> <city>Colorado Springs</city> <region>CO</region> <code>80919</code> <country>US</country></postal> <phone>+1 719 599 9026</phone> <email>mre@eng.sun.com</email></address></author> <date year='1999' month='June' /> <abstract> <t>This memorandum clarifies various security issues involving the NFSv2 and NFSv3 protocols and then describes how the NFS protocol use the RPCSEC_GSS security flavor protocol and Kerberos V5. This memorandum is provided so that people can write compatible implementations.</t> </abstract> </front> <seriesInfo name='RFC' value='2623' /> <format type='TXT' octets='42521' target='http://www.rfc-editor.org/rfc/rfc2623.txt' /> </reference> <reference anchor="Chet"> <front> <title>Improving the Performance and Correctness of an NFS Server</title> <author initials="C." surname="Juszczak" fullname="Chet Juszczak"> <organization>Digital Equipment Corporation</organization> </author> <date month="June" year="1990"/> <abstract> <t> Describes reply cache implementation that avoids work in the server by handling duplicate requests. More important, though listed as a side-effect, the reply cache aids in the avoidance of destructive non- idempotent operation re-application -- improving correctness. </t> </abstract> </front> <seriesInfo name="USENIX Conference Proceedings" value="" /> </reference> <reference anchor='RFC3232'> <front> <title>Assigned Numbers: RFC 1700 is Replaced by an On-line Database</title> <author initials='J.' surname='Reynolds' fullname='J. Reynolds' role='editor'> <organization /></author> <date year='2002' month='January' /> <abstract> <t><p>This memo obsoletes RFC 1700 (STD 2) "Assigned Numbers", which contained an October 1994 snapshot of assigned Internet protocol parameters. This memo provides information for the Internet community. </p></t> </abstract></front> <seriesInfo name='RFC' value='3232' /> <format type='TXT' octets='3849' target='http://www.rfc-editor.org/rfc/rfc3232.txt' /> </reference> <reference anchor='RFC1833'> <front> <title>Binding Protocols for ONC RPC Version 2</title> <author initials='R.' surname='Srinivasan' fullname='Raj Srinivasan'> <organization>Sun Microsystems, Inc., ONC Technologies</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>M/S MTV-5-40</street> <city>Mountain View</city> <region>CA</region> <code>94043</code> <country>US</country></postal> <phone>+1 415 336 2478</phone> <facsimile>+1 415 336 6015</facsimile> <email>raj@eng.sun.com</email></address></author> <date year='1995' month='August' /> <abstract> <t>This document describes the binding protocols used in conjunction with the ONC Remote Procedure Call (ONC RPC Version 2) protocols.</t></abstract></front> <seriesInfo name='RFC' value='1833' /> <format type='TXT' octets='24449' target='http://www.rfc-editor.org/rfc/rfc1833.txt' /> </reference> <reference anchor="rpc_xid_issues"> <front> <title>RPC XID Issues</title> <author initials="R." surname="Werme" fullname="Ric Werme"> <organization>Digital Equipment Corporation</organization> </author> <date month="February" year="1996"/> <abstract> <t> The presentation provides implementation advice for ONC RPC transaction identifier (xid) generation. </t> </abstract> </front> <seriesInfo name="USENIX Conference Proceedings" value="" /> </reference> <reference anchor='RFC1094'> <front> <title abbrev='NFS: Network File System'>NFS: Network File System Protocol specification</title> <author initials='B.' surname='Nowicki' fullname='Bill Nowicki'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>Mail Stop 1-40</street> <city>Mountain View</city> <region>CA</region> <code>94043</code> <country>US</country></postal> <phone>+1 415 336 7278</phone> <email>nowicki@SUN.COM</email></address></author> <date year='1989' month='March' /></front> <seriesInfo name='RFC' value='1094' /> <format type='TXT' octets='51454' target='http://www.rfc-editor.org/rfc/rfc1094.txt' /> </reference> <reference anchor="ha_nfs_ibm">anchor="ha_nfs_ibm"> <front> <title>A Highly Available Network Server</title> <author initials="A." surname="Bhide" fullname="Anupam Bhide"> <organization>IBM T.J. Watson Research Center</organization> </author> <author initials="E. N." surname="Elnozahy" fullname="Elmootazbellah N. Elnozahy"> <organization>IBM T.J. Watson Research Center</organization> </author> <author initials="S. P." surname="Morgan" fullname="Stephen P. Morgan "> <organization>IBM T.J. Watson Research Center</organization> </author> <date month="January" year="1991"/> <abstract> <t> This paper presents the design and implementation of a Highly Available Network File Server (HA-NFS). We separate the problem of network file server reliability into three different subproblems: server reliability, disk reliability, and network reliability. HA-NFS offers a different solution for each: dual-ported disks and impersonation are used to provide server reliability, disk mirroring can be used to provide disk reliability, and optional network replication can be used to provide network reliability. The implementation shows that HA-NFS provides high availability without the excessive resource overhead or the performance degradation that characterize traditional replication methods. Ongoing operations are not aborted during fail-over and recovery is completely transparent to applications. HA-NFS adheres to the NFS protocol standard and can be used by existing NFS clients without modification. </t> </abstract> </front><seriesInfo name="USENIX<refcontent>USENIX ConferenceProceedings" value="" /> </reference> <reference anchor='RFC5664'> <front> <title> Object-Based Parallel NFS (pNFS) Operations </title> <author initials='B' surname='Halevy' fullname='Benny Halevy'> <organization /> </author> <author initials='B' surname='Welch' fullname='Brent Welch'> <organization /> </author> <author initials='J' surname='Zelenka' fullname='Jim Zelenka'> <organization /> </author> <date month='January' year='2010' /> <abstract><t>This Internet-Draft provides a description of the object-based pNFS extension for NFSv4. This is a companion to the main pnfs specification in the NFSv4 Minor Version 1 Internet Draft, which is currently draft-ietf-nfsv4-minorversion1-23.</t></abstract> </front> <seriesInfo name='RFC' value='5664' /> <format type='TXT' target='http://www.ietf.org/internet-drafts/draft-ietf-nfsv4-pnfs-obj-12.txt' />Proceedings</refcontent> </reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5664.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5663.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2054.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2055.xml"/> <referenceanchor='RFC5663'> <front> <title> Parallel NFS (pNFS) Block/Volume Layout </title> <author initials='D' surname='Black' fullname='David Black'> <organization /> </author> <author initials='J' surname='Glasgow' fullname='Jason Glasgow'> <organization /> </author> <author initials='S' surname='Fridella' fullname='Stephen Fridella'> <organization /> </author> <date month='January' year='2010' /> <abstract><t>Parallel NFS (pNFS) extends NFSv4 to allow clients to directly access file data on the storage used by the NFSv4 server. This ability to bypass the server for data access can increase both performance and parallelism, but requires additional client functionality for data access, some of which is dependent on the class of storage used. The main pNFS operations draft specifies storage-class-independent extensions to NFS; this draft specifies the additional extensions (primarily data structures) for use of pNFS with block and volume based storage.</t></abstract> </front> <seriesInfo name='RFC' value='5663' /> <format type='TXT' target='http://www.ietf.org/internet-drafts/draft-ietf-nfsv4-pnfs-block-11.txt' /> </reference> <reference anchor='RFC2054'> <front> <title>WebNFS Client Specification</title> <author initials='B.' surname='Callaghan' fullname='Brent Callaghan'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>Mailstop Mpk17-201</street> <city>Mountain View</city> <region>CA</region> <code>94043-1100</code> <country>US</country></postal> <phone>+1 415 786 5067</phone> <facsimile>+1 415 786 5896</facsimile> <email>brent.callaghan@eng.sun.com</email></address></author> <date year='1996' month='October' /> <abstract> <t>This document describes a lightweight binding mechanism that allows NFS clients to obtain service from WebNFS-enabled servers with a minimum of protocol overhead. In removing this overhead, WebNFS clients see benefits in faster response to requests, easy transit of packet filter firewalls and TCP-based proxies, and better server scalability.</t></abstract></front> <seriesInfo name='RFC' value='2054' /> <format type='TXT' octets='36354' target='http://www.rfc-editor.org/rfc/rfc2054.txt' /> </reference> <reference anchor='RFC2055'> <front> <title>WebNFS Server Specification</title> <author initials='B.' surname='Callaghan' fullname='Brent Callaghan'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>2550 Garcia Avenue</street> <street>Mailstop Mpk17-201</street> <city>Mountain View</city> <region>CA</region> <code>94043-1100</code> <country>US</country></postal> <phone>+1 415 786 5067</phone> <facsimile>+1 415 786 5896</facsimile> <email>brent.callaghan@eng.sun.com</email></address></author> <date year='1996' month='October' /> <abstract> <t>This document describes the specifications for a server of WebNFS clients. WebNFS extends the semantics of the NFSv3 protocol to allow clients to obtain filehandles more easily, without recourse to the portmap or MOUNT protocols. In removing the need for these protocols, WebNFS clients see benefits in faster response to requests, easy transit of firewalls and better server scalability This description is provided to facilitate compatible implementations of WebNFS servers.</t></abstract></front> <seriesInfo name='RFC' value='2055' /> <format type='TXT' octets='20498' target='http://www.rfc-editor.org/rfc/rfc2055.txt' /> </reference> <reference anchor="errata">anchor="errata" target="https://www.ietf.org/about/groups/iesg/statements/processing-rfc-errata/"> <front> <title>IESG Processing of RFC Errata for the IETF Stream </title> <author> <organization>IESG </organization> </author> <date month="July"year="2008" />year="2008"/> </front><format type='TXT' target='http://www.ietf.org/IESG/STATEMENTS/iesg-statement-07-30-2008.txt' /> </reference> <reference anchor='RFC2104'> <front> <title abbrev='HMAC'>HMAC: Keyed-Hashing for Message Authentication</title> <author initials='H.' surname='Krawczyk' fullname='Hugo Krawczyk'> <organization>IBM, T.J. Watson Research Center</organization> <address> <postal> <street>P.O.Box 704</street> <city>Yorktown Heights</city> <region>NY</region> <code>10598</code> <country>US</country></postal> <email>hugo@watson.ibm.com</email></address></author> <author initials='M.' surname='Bellare' fullname='Mihir Bellare'> <organization>University of California at San Diego, Dept of Computer Science and Engineering</organization> <address> <postal> <street>9500 Gilman Drive</street> <street>Mail Code 0114</street> <city>La Jolla</city> <region>CA</region> <code>92093</code> <country>US</country></postal> <email>mihir@cs.ucsd.edu</email></address></author> <author initials='R.' surname='Canetti' fullname='Ran Canetti'> <organization>IBM T.J. Watson Research Center</organization> <address> <postal> <street>P.O.Box 704</street> <city>Yorktown Heights</city> <region>NY</region> <code>10598</code> <country>US</country></postal> <email>canetti@watson.ibm.com</email></address></author> <date year='1997' month='February' /> <abstract> <t>This document describes HMAC, a mechanism for message authentication using cryptographic hash functions. HMAC can be used with any iterative cryptographic hash function, e.g., MD5, SHA-1, in combination with a secret shared key. The cryptographic strength of HMAC depends on the properties of the underlying hash function.</t></abstract></front> <seriesInfo name='RFC' value='2104' /> <format type='TXT' octets='22297' target='http://www.rfc-editor.org/rfc/rfc2104.txt' /> </reference> <reference anchor='RFC2624'> <front> <title abbrev='NFSv4 Design Considerations'>NFS Version 4 Design Considerations</title> <author initials='S.' surname='Shepler' fullname='Spencer Shepler'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>7808 Moonflower Drive</street> <city>Austin</city> <region>TX</region> <code>78750</code> <country>US</country></postal> <phone>+1 512 349 9376</phone> <email>spencer.shepler@eng.sun.com</email></address></author> <date year='1999' month='June' /> <abstract> <t>The main task of the NFSv4 working group is to create a protocol definition for a distributed file system that focuses on the following items: improved access and good performance on the Internet, strong security with negotiation built into the protocol, better cross-platform interoperability, and designed for protocol extensions. NFSv4 will owe its general design to the previous versions of NFS. It is expected, however, that many features will be quite different in NFSv4 than previous versions to facilitate the goals of the working group and to address areas that NFSv2 and NFSv3 have not.</t> <t>This design considerations document is meant to present more detail than the working group charter. Specifically, it presents the areas that the working group will investigate and consider while developing a protocol specification for NFSv4. Based on this investigation the working group will decide the features of the new protocol based on the cost and benefits within the specific feature areas.</t></abstract> <note title='Key Words'> <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.</t></note></front> <seriesInfo name='RFC' value='2624' /> <format type='TXT' octets='52891' target='http://www.rfc-editor.org/rfc/rfc2624.txt' /></reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2104.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2624.xml"/> <reference anchor="xnfs"> <front> <title> Protocols for Interworking: XNFS, Version3W, ISBN 1-85912-184-5 </title>3W</title> <seriesInfo name="ISBN" value="1-85912-184-5"/> <author> <organization>The Open Group </organization> </author> <date month="February" year="1998"/> </front> </reference> <reference anchor="Floyd"> <front> <title> The Synchronization of Periodic Routing Messages </title> <author initials="S."surname="Floyd" > <organization></organization>surname="Floyd"> <organization/> </author> <author initials="V." surname="Jacobson"><organization></organization><organization/> </author> <date month="April" year="1994"/> </front><seriesInfo name="IEEE/ACM<refcontent>IEEE/ACM Transactions onNetworking" value="2(2),Networking, 2(2), pp.122-136" /> </reference> <reference anchor="RFC3720"> <front> <title>Internet Small Computer Systems Interface (iSCSI)</title> <author initials="J." surname="Satran" fullname="J. Satran"> <organization/> </author> <author initials="K." surname="Meth" fullname="K. Meth"> <organization/> </author> <author initials="C." surname="Sapuntzakis" fullname="C. Sapuntzakis"> <organization/> </author> <author initials="M." surname="Chadalapaka" fullname="M. Chadalapaka"> <organization/> </author> <author initials="E." surname="Zeidner" fullname="E. Zeidner"> <organization/> </author> <date year="2004" month="April"/> </front> <seriesInfo name="RFC" value="3720"/> <format type="TXT" octets="578468" target="http://www.rfc-editor.org/rfc/rfc3720.txt"/>122-136</refcontent> </reference> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7143.xml"/> <reference anchor="FCP-2"> <front> <title>Fibre Channel Protocol for SCSI, 2nd Version (FCP-2)</title> <author initials="R." surname="Snively" fullname="Robert Snively"> <organization>Brocade Communication Systems, Inc.</organization> </author> <date month="Oct"year="2003" />year="2003"/> </front><seriesInfo name="ANSI/INCITS" value="350-2003" /><refcontent>ANSI/INCITS, 350-2003</refcontent> </reference> <referenceanchor='OSD-T10' target='http://www.t10.org/ftp/t10/drafts/osd/osd-r10.pdf'>anchor="OSD-T10" target="https://www.t10.org/drafts.htm"> <front> <title>Object-Based Storage Device Commands (OSD)</title> <author initials="R.O." surname="Weber" fullname="Ralph O. Weber"> <organization>ENDL Texas</organization> </author> <date month="July" year="2004"/> </front><seriesInfo name="ANSI/INCITS" value="400-2004"/><refcontent>ANSI/INCITS, 400-2004</refcontent> </reference> <reference anchor="PVFS"> <front> <title>PVFS: A Parallel File System for Linux Clusters.</title> <author initials="P. H." surname="Carns"> <organization> Parallel Architecture Research Laboratory, Clemson University, Clemson, SC 29634 </organization> </author> <author initials="W. B." surname="Ligon III"> <organization> Parallel Architecture Research Laboratory, Clemson University, Clemson, SC 29634 </organization> </author> <author initials="R. B." surname="Ross"> <organization> Parallel Architecture Research Laboratory, Clemson University, Clemson, SC 29634 </organization> </author> <author initials="R." surname="Thakur"> <organization>Mathematics and Computer Science Division, Argonne National Laboratory, Argonne, IL 60439</organization> </author> <date year="2000"/> </front><seriesInfo name="Proceedings<refcontent>Proceedings of the 4th Annual Linux Showcase andConference" value=""/>Conference</refcontent> </reference> <referenceanchor="access_api">anchor="access_api" target="https://www.opengroup.org"> <front> <title>The Open Group Base Specifications Issue 6, IEEE Std 1003.1, 2004 Edition </title> <author> <organization>The Open Group </organization> </author> <dateyear="2004" />year="2004"/> <abstract> <t> The description of the access() function states: "If the process has appropriate privileges, an implementation may indicate success for X_OK even if none of the execute file permission bits are set." </t> </abstract> </front> </reference><reference anchor='RFC2224'> <front> <title>NFS URL Scheme</title> <author initials='B.' surname='Callaghan' fullname='Brent Callaghan'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>Mailstop Mpk17-201</street> <street>901 San Antonio Road</street> <street>Palo Alto</street> <street>California 94303</street></postal> <phone>1-415-786-5067</phone> <facsimile>1-415-786-5896</facsimile> <email>brent.callaghan@eng.sun.com</email></address></author> <date year='1997' month='October' /> <area>Applications</area> <keyword>NFS</keyword> <keyword>network file system</keyword> <keyword>uniform resource</keyword> <abstract> <t> A new URL scheme, 'nfs' is defined. It is used to refer to files and directories on NFS servers using the general URL syntax defined in RFC 1738, "Uniform Resource Locators (URL)". </t> <t> This scheme uses the public filehandle and multi-component look up [RFC2054, RFC2055] to access server data with a minimum of protocol overhead. </t> <t> The NFS protocol provides access to shared file systems across networks. It is designed to be machine, operating system, network architecture, and transport protocol independent. </t></abstract></front> <seriesInfo name='RFC' value='2224' /> <format type='TXT' octets='22726' target='http://www.rfc-editor.org/rfc/rfc2224.txt' /> <format type='HTML' octets='35259' target='http://xml.resource.org/public/rfc/html/rfc2224.html' /> <format type='XML' octets='24805' target='http://xml.resource.org/public/rfc/xml/rfc2224.xml' /> </reference> <reference anchor='RFC2755'> <front> <title>Security Negotiation for WebNFS</title> <author initials='A.' surname='Chiu' fullname='Alex Chiu'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>901 San Antonio Road</street> <city>Palo Alto</city> <region>CA</region> <code>94303</code> <country>US</country></postal> <phone>+1 650 786 6465</phone> <email>alex.chiu@Eng.sun.com</email></address></author> <author initials='M.' surname='Eisler' fullname='Mike Eisler'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>901 San Antonio Road</street> <city>Palo Alto</city> <region>CA</region> <code>94303</code> <country>US</country></postal> <phone>+1 719 599 9026</phone> <email>michael.eisler@Eng.sun.com</email></address></author> <author initials='B.' surname='Callaghan' fullname='Brent Callaghan'> <organization>Sun Microsystems, Inc.</organization> <address> <postal> <street>901 San Antonio Road</street> <city>Palo Alto</city> <region>CA</region> <code>94303</code> <country>US</country></postal> <phone>+1 650 786 5067</phone> <email>brent.callaghan@Eng.sun.com</email></address></author> <date year='2000' month='January' /> <abstract> <t>This document describes a protocol for a WebNFS clientto negotiate the desired security mechanism with a WebNFS serverbefore the WebNFS client falls back to the MOUNT v3 protocol. This document is provided so that people can write compatible implementations.</t></abstract></front> <seriesInfo name='RFC' value='2755' /> <format type='TXT' octets='23493' target='http://www.rfc-editor.org/rfc/rfc2755.txt' /> </reference> <reference anchor='RFC5226'> <front> <title>Guidelines for Writing an IANA Considerations Section in RFCs</title> <author initials='T.' surname='Narten' fullname='T. Narten'> <organization /></author> <author initials='H.' surname='Alvestrand' fullname='H. Alvestrand'> <organization /></author> <date year='2008' month='May' /> <abstract> <t>Many protocols make use of identifiers consisting of constants and other well-known values. Even after a protocol has been defined and deployment has begun, new values may need to be assigned (e.g., for a new option type in DHCP, or a new encryption or authentication transform for IPsec). To ensure that such quantities have consistent values and interpretations across all implementations, their assignment must be administered by a central authority. For IETF protocols, that role is provided by the Internet Assigned Numbers Authority (IANA).</t><t> In order for IANA to manage a given namespace prudently, it needs guidelines describing the conditions under which new values can be assigned or when modifications to existing values can be made. If IANA is expected to play a role in the management of a namespace, IANA must be given clear and concise instructions describing that role. This document discusses issues that should be considered in formulating a policy for assigning values to a namespace and provides guidelines for authors on the specific text that must be included in documents that place demands on IANA.</t><t> This document obsoletes RFC 2434. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements.</t></abstract></front> <seriesInfo name='BCP' value='26' /> <seriesInfo name='RFC' value='5226' /> <format type='TXT' octets='66160' target='http://www.rfc-editor.org/rfc/rfc5226.txt' /> </reference><xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2224.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.2755.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8126.xml"/> <reference anchor="Err2006"target="https://www.rfc-editor.org/errata_search.php?eid=2006">quote-title="false" target="https://www.rfc-editor.org/errata/eid2006"> <front><title>Errata 2006 for RFC 5661</title> <author initials='M.' surname='Eisler' fullname='Mike Eisler'><title>Erratum ID 2006</title> <author> <organization>RFC Errata</organization> </author><date year='2010' month='January' /></front> <refcontent>RFC 5661</refcontent> </reference> <referenceanchor="AFS" target="https://www.cs.cmu.edu/~satya/docdir/spasojevic-tocs-afs-measurement-1996.pdf">anchor="AFS"> <front> <title> An Empirical Study of a Wide-Area Distributed File System </title> <authorinitials='M.' surname='Spasojevic' fullname='Mirjana Spasojevic'>initials="M." surname="Spasojevic" fullname="Mirjana Spasojevic"> </author> <authorinitials='M.' surname='Satayanarayanan' fullname='Mahadev Satayanarayanan'>initials="M." surname="Satayanarayanan" fullname="Mahadev Satayanarayanan"> </author> <dateyear='1996' month='May' />year="1996" month="May"/> </front> <refcontent>ACM Transactions on Computer Systems</refcontent> <refcontent>Vol. 14</refcontent> <refcontent>No. 2</refcontent> <refcontent>pp. 200-222</refcontent> <seriesInfo name="DOI" value="10.1145/227695.227698"/> </reference><?rfc include="reference.RFC.5661.xml"?> <?rfc include="reference.RFC.8178.xml"?> <?rfc include="reference.RFC.7530.xml"?> <?rfc include="reference.RFC.7931.xml"?> <?rfc include="reference.RFC.8434.xml"?> <?rfc include="reference.RFC.7258.xml"?> <?rfc include="reference.RFC.3552.xml"?><xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5661.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8178.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7530.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7931.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.8434.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.7258.xml"/> <xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.3552.xml"/> </references> </references><!-- $Id: 2009-12-20-TO-rfc5661.xml,v 1.2 2009/12/21 05:59:32 shepler.mre Exp $ --> <!-- Copyright (C) The IETF Trust (2007-2008) --> <!-- Copyright (C) The Internet Society (2006) --><section anchor="NEED"title="Neednumbered="true" toc="default"> <name>The Need forthis Update">This Update</name> <t> This document includes an explanation of how clients and servers are to determine the particular network access paths to be used to access a file system. This includesdescribingdescriptions of how to handle changes to the specific replica to be used or to the set of addresses to be used to accessit are to be dealt with,it, and how to deal transparently with transfers of responsibility that need to bemade can be dealt with transparently.made. This includes cases in which there is a shift between one replica and another and those in which different network access paths are used to access the same replica. </t> <t> As a result of the following problems inRFC5661RFC 5661 <xreftarget="RFC5661"/>,target="RFC5661" format="default"/>, itiswas necessary to provide the specific updateswhichthat are made by this document. These updates are described in <xreftarget="CHG"/> <list style="symbols"> <t> RFC5661target="CHG" format="default"/>. </t> <ul spacing="normal"> <li> RFC 5661 <xreftarget="RFC5661"/>,target="RFC5661" format="default"/>, while it dealt with situations in which various forms of clustering allowedco-ordinationcoordination of the state assigned byco-operatingcooperating servers to be used, made no provisions for Transparent State Migration. Within NFSv4.0, Transparent State Migration was first explained clearly inRFC7530RFC 7530 <xreftarget="RFC7530"/>target="RFC7530" format="default"/> and corrected and clarified byRFC7931RFC 7931 <xreftarget="RFC7931"/>.target="RFC7931" format="default"/>. No corresponding explanation for NFSv4.1 had been provided.</t> <t></li> <li> Although NFSv4.1was defined withprovided a clear definition of how trunking detection was to be done, there was no clear specification of how trunking discovery was to be done, despite the fact that the specification clearly indicated that this information could be made available via the file system location attributes.</t> <t></li> <li> Because the existence of multiple network access paths to the same file system was dealt with as if there were multiple replicas, issues relating to transitions between replicas could never be clearly distinguished from trunking-related transitions between the addresses used to access a particular file system instance. As a result, in situations in which both migration and trunking configuration changes were involved, neither of these could be clearly dealtwithwith, and the relationship between these two features was not seriously addressed.</t> <t></li> <li> Because use of two network access paths to the same file system instance(i.e.(i.e., trunking) was often treated as if two replicas were involved, it was considered that two replicas were being used simultaneously. As a result, the treatment of replicas being used simultaneously inRFC5661RFC 5661 <xref target="RFC5661"/>format="default"/> was notclearclear, as it covered the two distinct cases of a single file system instance being accessed by two different network access paths and two replicas being accessed simultaneously, with the limitations of the latter case not being clearly laid out.</t> </list> </t></li> </ul> <t> The majority of the consequences of these issues are dealt with by presenting in <xreftarget="NEW11"/>target="NEW11" format="default"/> a replacement for Section11 within RFC5661<xref target="RFC5661" sectionFormat="bare" section="11"/> of RFC 5661 <xref target="RFC5661"/>. This replacement modifies existingsub-sectionssubsections within that section and adds newones,ones as described in <xreftarget="CHG-11"/>.target="CHG-11" format="default"/>. Also, some existing sectionsarewere deleted. These changes were made in orderto: <list style="symbols"> <t>to do the following: </t> <ul spacing="normal"> <li> Reorganize the description so that the case of two network access paths to the same file system instanceneeds to beis distinguished clearly from the case of two different replicas since, in the former case, locking state is shared and there also can be sharing of session state.</t> <t></li> <li> Provide a clear statement regarding the desirability of transparent transfer of state between replicas together with a recommendation that eitherthattransparent transfer or a single-fs grace period be provided.</t> <t></li> <li> Specifically delineate howsuch transfers area client is tobe dealt with by the client,handle such transfers, taking into account the differences from the treatment in <xreftarget="RFC7931"/>target="RFC7931" format="default"/> made necessary by the major protocol changesmade into NFSv4.1.</t> <t> Provide discussion of</li> <li> Discuss the relationship between transparent state transfer and Parallel NFS (pNFS).</t> <t> Provide clarification of</li> <li> Clarify the fs_locations_info attribute in order to specify which portions of theinformationprovided information apply to a specific network access path and which apply to the replicawhichthat the path is used to access.</t> </list> </t></li> </ul> <t> In addition,there are also updates toother sections ofRFC5661RFC 5661 <xreftarget="RFC5661"/>, wheretarget="RFC5661" format="default"/> were updated to correct the consequences of the incorrect assumptions underlying thecurrenttreatment of multi-server namespaceissues also needed to be corrected.issues. These areto be dealt with asdescribed inSectionsAppendices <xref target="CHG-ops" format="counter"/> through <xref target="CHG-other" format="counter"/>.<list style="symbols"> <t></t> <ul spacing="normal"> <li> A revised introductory section regarding multi-server namespace facilities is provided.</t> <t></li> <li> A more realistic treatment of server scope isprovided, whichprovided. This treatment reflects the more limitedco-ordinationcoordination of locking state adopted by servers actually sharing a common server scope.</t> <t></li> <li> Some confusing text regarding changes in server_owner has been clarified.</t> <t></li> <li> The description of some existing errors has been modified to more clearly explain certainerrorserror situations to reflect the existence of trunking and the possible use of fs-specific grace periods. For details, see <xreftarget="CHG-errs"/>. </t> <t>target="CHG-errs" format="default"/>. </li> <li> New descriptions of certain existing operations are provided, either because the existing treatment did not account for situations that would arise in dealing withtransparent state migration,Transparent State Migration, or because some types of reclaim issues were not adequately dealt with in the context of fs-specific grace periods. For details, see <xreftarget="CHG-ops"/>. </t> </list> </t>target="CHG-ops" format="default"/>. </li> </ul> </section> <section anchor="CHG"title="Changesnumbered="true" toc="default"> <name>Changes inthis Update">This Update</name> <sectiontitle="Revisionsanchor="CHG-11" numbered="true" toc="default"> <name>Revisions Made to Section 11 ofRFC5661" anchor="CHG-11">RFC 5661</name> <t> A number of areasneeded to behave been revised or extended, in manycasecases replacingexisting sub-sectionssubsections withinsection 11Section <xref target="RFC5661" sectionFormat="bare" section="11"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>:<list style="symbols"> <t></t> <ul spacing="normal"> <li> New introductory material, including a terminology section, replaces theexistingmaterial inRFC5661RFC 5661 <xreftarget="RFC5661"/>target="RFC5661" format="default"/>, ranging from the start of theexistingoriginal Section11<xref target="RFC5661" sectionFormat="bare" section="11"/> up to and includingthe existingSection11.1.<xref target="RFC5661" sectionFormat="bare" section="11.1"/>. The new material starts at the beginning of <xreftarget="NEW11"/>target="NEW11" format="default"/> and continues through <xref target="SEC11-loc-attr"format="counter"/> below. </t>format="counter"/>. </li> <li> <t> A significant reorganization of the material inthe existingSections11.4<xref target="RFC5661" sectionFormat="bare" section="11.4"/> and11.5 (of RFC5661<xreftarget="RFC5661"/>) istarget="RFC5661" sectionFormat="bare" section="11.5"/> of RFC 5661 <xref target="RFC5661"/> was necessary. The reasons for the reorganization of these sections into a single section with multiple subsections are discussed in <xreftarget="SEC11-uses-reorg"/>target="SEC11-uses-reorg" format="default"/> below. This replacement appears as <xreftarget="SEC11-USES"/> below. <vspace blankLines='1' />target="SEC11-USES" format="default"/>. </t> <t> New material relating to the handling of the file system location attributes is contained in Sections <xref target="SEC11-USES-mult" format="counter"/> and <xref target="SEC11-USES-changes"format="counter"/> below.format="counter"/>. </t><t></li> <li> A new section describing requirements for user and group handling within a multi-server namespace has been added as <xreftarget="SEC11-users"/> </t> <t>target="SEC11-users" format="default"/>. </li> <li> A major replacement forthe existingSection11.7 of RFC5661<xref target="RFC5661"/>sectionFormat="bare" section="11.7"/> of RFC 5661 <xref target="RFC5661"/>, entitled "Effecting File System Transitions",will appearappears as Sections <xref target="SEC11-trans-oview" format="counter"/> through <xref target="SEC11-trans-server" format="counter"/>. The reasons for the reorganization of this section into multiple sections are discussed in <xreftarget="SEC11-trans-reorg"/>. </t> <t>target="SEC11-trans-reorg" format="default"/>. </li> <li> A replacement forthe existingSection11.10 of RFC5661<xref target="RFC5661"/>sectionFormat="bare" section="11.10"/> of RFC 5661 <xref target="RFC5661"/>, entitled "The Attribute fs_locations_info",will appearappears as <xreftarget="SEC11-li-new"/>,target="SEC11-li-new" format="default"/>, with <xreftarget="SEC11-li-changes"/>target="SEC11-li-changes" format="default"/> describing the differences between the new section and the treatment within <xref target="RFC5661"/>.format="default"/>. A revised treatmentiswas necessary because theexistingoriginal treatment did not make clear how the added attribute information relates to the case of trunked paths to the same replica. These issues were not addressed inRFC5661RFC 5661 <xref target="RFC5661"/>format="default"/> where the concepts of a replica and a network path used to access a replica were not clearly distinguished.</t> </list> </t></li> </ul> <sectiontitle="Re-organizationanchor="SEC11-uses-reorg" toc="exclude" numbered="true"> <name>Reorganization of Sections 11.4 and 11.5 ofRFC5661" anchor="SEC11-uses-reorg" toc="exclude">RFC 5661</name> <t> Previously, issues related to the fact that multiple location entries directed the client to the same file system instance were dealt with ina separateSection11.5<xref target="RFC5661" sectionFormat="bare" section="11.5"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>. Because of the new treatment of trunking, these issues now belong within <xreftarget="SEC11-USES"/> below.target="SEC11-USES" format="default"/>. </t> <t> In this new section, trunking isdealt withcovered in <xreftarget="SEC11-USES-trunk"/>target="SEC11-USES-trunk" format="default"/> together with the other uses of file system location information described in Sections <xreftarget="SEC11-USES-types"/>target="SEC11-USES-types" format="counter"/> through <xref target="SEC11-USES-ref" format="counter"/>. </t> <t> As a result, <xreftarget="SEC11-USES"/>target="SEC11-USES" format="default"/>, whichwill replacereplaces Section11.4<xref target="RFC5661" sectionFormat="bare" section="11.4"/> ofRFC5661RFC 5661 <xreftarget="RFC5661"/>target="RFC5661"/>, is substantially different than the section it replaces in that someexistingoriginal sectionswill behave been replaced by corresponding sectionsbelow while, at the same time,as described below, while new sectionswill be added, resulting in a replacement containing some renumbered sections, as follows: <list style ='symbols'> <t>have been added: </t> <ul spacing="normal"> <li> The material in <xreftarget="SEC11-USES"/>,target="SEC11-USES" format="default"/>, exclusive of subsections, replaces the material in Section11.4<xref target="RFC5661" sectionFormat="bare" section="11.4"/> ofRFC5661RFC 5661 <xref target="RFC5661"/> exclusive of subsections.</t> <t></li> <li> <xreftarget="SEC11-USES-mult"/>target="SEC11-USES-mult" format="default"/> isathe new first subsection of the overall section.</t> <t></li> <li> <xreftarget="SEC11-USES-trunk"/>target="SEC11-USES-trunk" format="default"/> isathe new second subsection of the overall section.</t> <t></li> <li> Each of the Sections <xref target="SEC11-USES-repl" format="counter"/>, <xref target="SEC11-USES-migr" format="counter"/>, and <xref target="SEC11-USES-ref" format="counter"/> replaces (in order) one of the corresponding Sections11.4.1, 11.4.2,<xref target="RFC5661" sectionFormat="bare" section="11.4.1"/>, <xref target="RFC5661" sectionFormat="bare" section="11.4.2"/>, and11.4.3<xref target="RFC5661" sectionFormat="bare" section="11.4.3"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>.11.4.4, and 11.4.5. </t> <t></li> <li> <xreftarget="SEC11-USES-changes"/>target="SEC11-USES-changes" format="default"/> isathe new final subsection of the overall section.</t> </list> </t></li> </ul> </section> <sectiontitle="Re-organizationanchor="SEC11-trans-reorg" toc="exclude" numbered="true"> <name>Reorganization of Material Dealing with File SystemTransitions" anchor="SEC11-trans-reorg" toc="exclude">Transitions</name> <t> The material relating to file system transition, previously contained in Section11.7<xref target="RFC5661" sectionFormat="bare" section="11.7"/> ofRFC5661RFC 5661 <xref target="RFC5661"/> has been reorganized and augmented as described below:<list style="symbols"></t> <ul spacing="normal"> <li> <t> Because there can be a shift of the network access paths used to access a file system instance without any shift between replicas, a new <xreftarget="SEC11-trans-oview"/>target="SEC11-trans-oview" format="default"/> distinguishes between those cases in which there is a shift between distinct replicas and those involving a shift in network access paths with no shift between replicas.<vspace blankLines="1"/></t> <t> As a result,athe new <xreftarget="SEC11-nwa"/>target="SEC11-nwa" format="default"/> deals with network addresstransitionstransitions, while the bulk of theformeroriginal Section11.7 (in RFC5661<xreftarget="RFC5661"/>) istarget="RFC5661" sectionFormat="bare" section="11.7"/> of RFC 5661 <xref target="RFC5661"/> has been extensively modified as reflected in <xreftarget="SEC11-EFF"/>target="SEC11-EFF" format="default"/>, which is now limited to cases in which there is a shift between two different sets of replicas. </t><t></li> <li> The additional <xreftarget="SEC11-trans-locking"/>target="SEC11-trans-locking" format="default"/> discusses the case in which a shift to a different replica is made and state is transferred to allow the client the ability to have continued access to its accumulated locking state on the new server.</t> <t></li> <li> The additional <xreftarget="SEC11-trans-client"/>target="SEC11-trans-client" format="default"/> discusses the client's response to accesstransitions andtransitions, how it determines whether migration has occurred, and how it gets access to any transferred locking and session state.</t> <t></li> <li> The additional <xreftarget="SEC11-trans-server"/>target="SEC11-trans-server" format="default"/> discusses the responsibilities of the source and destination servers when transferring locking and session state.</t> </list> </t></li> </ul> <t> Thisre-organizationreorganization has caused a renumbering of the sections withinSection 11 of<xreftarget="RFC5661"/>target="RFC5661" sectionFormat="of" section="11"/> as described below:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The new Sections <xref target="SEC11-trans-oview" format="counter"/> and <xref target="SEC11-nwa" format="counter"/> have resulted in the renumbering of existing sections with thesenumbers to be renumbered. </t> <t> Section 11.7 ofnumbers. </li> <li> <xreftarget="RFC5661"/> will betarget="RFC5661" sectionFormat="of" section="11.7"/> has been substantially modified andappearappears as <xreftarget="SEC11-EFF"/>.target="SEC11-EFF" format="default"/>. The necessary modifications reflect the fact that this sectionwillonlydealdeals with transitions betweenreplicasreplicas, while transitions between network addresses are dealt with in other sections. Details of the reorganization are described later in this section.</t> <t> The additional</li> <li> Sections <xref target="SEC11-trans-locking" format="counter"/>, <xref target="SEC11-trans-client" format="counter"/>, and <xref target="SEC11-trans-server" format="counter"/> have been added.</t> <t></li> <li> Consequently, Sections11.8, 11.9, 11.10,<xref target="RFC5661" sectionFormat="bare" section="11.8"/>, <xref target="RFC5661" sectionFormat="bare" section="11.9"/>, <xref target="RFC5661" sectionFormat="bare" section="11.10"/>, and11.11<xref target="RFC5661" sectionFormat="bare" section="11.11"/> in <xreftarget="RFC5661"/>target="RFC5661" format="default"/> now appear as Sections11.13, 11.14, 11.15,<xref target="effecting_referrals" format="counter"/>, <xref target="fs_locations" format="counter"/>, <xref target="SEC11-li-new" format="counter"/>, and11.16,<xref target="fs_status" format="counter"/>, respectively.</t> </list> </t></li> </ul> <t> As part of this generalre-organization,reorganization, Section11.7<xref target="RFC5661" sectionFormat="bare" section="11.7"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>will behas been modified as described below:<list style="symbols"> <t></t> <ul spacing="normal"> <li> Sections11.7<xref target="RFC5661" sectionFormat="bare" section="11.7"/> and11.7.1<xref target="RFC5661" sectionFormat="bare" section="11.7.1"/> ofRFC5661RFC 5661 <xreftarget="RFC5661"/> are to betarget="RFC5661" format="default"/> have been replaced by Sections <xref target="SEC11-EFF" format="counter"/> and <xref target="SEC11-EFF-simul" format="counter"/>, respectively.</t> <t></li> <li> Section11.7.2<xref target="RFC5661" sectionFormat="bare" section="11.7.2"/> of RFC 5661 (and included subsections)of RFC5661 <xref target="RFC5661"/> are to behas been deleted.</t> <t></li> <li> Sections11.7.3, 11.7.4. 11.7.5, 11.7.5.1,<xref target="RFC5661" sectionFormat="bare" section="11.7.3"/>, <xref target="RFC5661" sectionFormat="bare" section="11.7.4"/>, <xref target="RFC5661" sectionFormat="bare" section="11.7.5"/>, <xref target="RFC5661" sectionFormat="bare" section="11.7.5.1"/>, and11.7.6<xref target="RFC5661" sectionFormat="bare" section="11.7.6"/> ofRFC5661RFC 5661 <xreftarget="RFC5661"/> are to betarget="RFC5661" format="default"/> have been replaced by Sections <xref target="SEC11-EFF-fh" format="counter"/>, <xref target="SEC11-EFF-fileid" format="counter"/>, <xref target="SEC11-EFF-fsid" format="counter"/>, <xref target="SEC11-EFF-fsid-split" format="counter"/>, and <xref target="SEC11-EFF-change" format="counter"/> respectively in this document.</t> <t></li> <li> Section11.7.7<xref target="RFC5661" sectionFormat="bare" section="11.7.7"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>is to behas been replaced by <xreftarget="SEC11-EFF-lock"/>target="SEC11-EFF-lock" format="default"/>. Thissub-sectionsubsection has been moved to the end of the section dealing with file system transitions.</t> <t></li> <li> Sections11.7.8, 11.7.9.<xref target="RFC5661" sectionFormat="bare" section="11.7.8"/>, <xref target="RFC5661" sectionFormat="bare" section="11.7.9"/>, and11.7.10<xref target="RFC5661" sectionFormat="bare" section="11.7.10"/> ofRFC5661RFC 5661 <xreftarget="RFC5661"/> are to betarget="RFC5661" format="default"/> have been replaced by Sections <xref target="SEC11-EFF-wv" format="counter"/>, <xref target="SEC11-EFF-rdc" format="counter"/>, and <xref target="SEC11-EFF-data" format="counter"/> respectively in this document.</t> </list> </t></li> </ul> </section> <sectiontitle="Updatesanchor="SEC11-li-changes" toc="exclude" numbered="true"> <name>Updates totreatmentthe Treatment offs_locations_info" anchor="SEC11-li-changes" toc="exclude">fs_locations_info</name> <t> Various elements of the fs_locations_info attribute contain information that applies to either a specific file system replica or to a network path or set of network paths used to access such a replica. Theexistingoriginal treatment offs_locations info (in Section 11.10fs_locations_info (Section <xref target="RFC5661" sectionFormat="bare" section="11.10"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>)doesdid not clearly distinguish these cases, in part because the document did not clearly distinguish replicas from the paths used to access them. </t> <t> In addition, special clarificationneeded to behas been provided with regard to the following fields:<list style="symbols"> <t></t> <ul spacing="normal"> <li> With regard to the handling of FSLI4GF_GOING, itneeds to be made clearwas clarified that this only applies to the unavailability of a replica rather than to a path to access a replica.</t> <t></li> <li> In describing the appropriate value for a server to use for fli_valid_for, itneeds to be made clearwas clarified that there is no need for the client to frequently fetch the fs_locations_info value to be prepared for shifts in trunking patterns.</t> <t></li> <li> Clarification of the rules for extensions to the fls_infoneeds to behas been provided. Theexistingoriginal treatmentreflectsreflected the extension model that was in effect at the timeRFC5661RFC 5661 <xreftarget="RFC5661"/>target="RFC5661" format="default"/> was written,and needed to bebut has been updated in accordance with the extension model described inRFC8178RFC 8178 <xreftarget="RFC8178"/>. </t> </list> </t>target="RFC8178" format="default"/>. </li> </ul> </section> </section> <sectiontitle="Revisionsanchor="CHG-ops" numbered="true" toc="default"> <name>Revisions Made to Operations inRFC5661" anchor="CHG-ops">RFC 5661</name> <t>Revised descriptions were neededDescriptions have been revised to address issues that arose in effecting necessary changes to multi-server namespace features.<list style="symbols"> <t></t> <ul spacing="normal"> <li> Theexistingtreatment of EXCHANGE_ID(in Section 18.35(Section <xref target="RFC5661" sectionFormat="bare" section="18.35"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>)assumesassumed that client IDs cannot becreated/ confirmedcreated/confirmed other than by the EXCHANGE_ID and CREATE_SESSION operations. Also, the necessary use of EXCHANGE_ID in recovery from migration and related situationsiswas notaddressed clearly.clearly addressed. A revised treatment of EXCHANGE_IDis necessarywas necessary, and it appears in <xreftarget="OP_EXCHANGE_ID"/>target="OP_EXCHANGE_ID" format="default"/>, while the specific differences between it and the treatment within <xreftarget="RFC5661"/>target="RFC5661" format="default"/> are explained in <xreftarget="OTH-eid"/>target="OTH-eid" format="default"/> below.</t> <t></li> <li> Theexistingtreatment of RECLAIM_COMPLETE insection 18.51Section <xref target="RFC5661" sectionFormat="bare" section="18.51"/> ofRFC5661RFC 5661 <xreftarget="RFC5661"/>) istarget="RFC5661"/> was not sufficiently clear about the purpose and use of the rca_one_fs and how the serveriswas to deal with inappropriate values of this argument. Because the resulting confusionraisesraised interoperability issues, a new treatment of RECLAIM_COMPLETEis necessarywas necessary, and it appears in <xreftarget="OP_RECLAIM_COMPLETE"/> belowtarget="OP_RECLAIM_COMPLETE" format="default"/>, while the specific differences between it and the treatment withinRFC5661RFC 5661 <xreftarget="RFC5661"/>target="RFC5661" format="default"/> are discussed in <xreftarget="OTH-rc"/>target="OTH-rc" format="default"/> below. In addition, the definitions of the reclaim-related errorsreceivehave received an updated treatment in <xreftarget="errors_reclaim"/>target="errors_reclaim" format="default"/> to reflect the fact that there are multiple contexts for lock reclaim operations.</t> </list> </t></li> </ul> <sectiontitle="Revision toanchor="OTH-eid" toc="exclude" numbered="true"> <name>Revision of Treatment ofEXCHANGE_ID" anchor="OTH-eid" toc="exclude">EXCHANGE_ID</name> <t> Therearewas a number of issues in the original treatment of EXCHANGE_ID(in RFC5661in RFC 5661 <xreftarget="RFC5661"/>)target="RFC5661" format="default"/> thatcausecaused problems for Transparent State Migration and for the transfer of access between different network access paths to the same file system instance. </t> <t> These issuesarisearose from the fact that this treatment waswritten, <list style="symbols"> <t>written: </t> <ul spacing="normal"> <li> Assuming that a client ID can only become known to a server by having been created by executing an EXCHANGE_ID, with confirmation of the ID only possible by execution of a CREATE_SESSION.</t> <t></li> <li> Considering the interactions between a client and a server only occurring on a single networkaddress </t> </list> </t>address. </li> </ul> <t> As these assumptions have become invalid in the context of Transparent State Migration and active use of trunking, the treatment has been modified in severalrespects. <list style="symbols">respects: </t> <ul spacing="normal"> <li> <t> It had been assumed that anEXCHANGED_IDEXCHANGE_ID executed when the serveriswas already awareofthat a given client instancemust bewas either updating associated parameters(e.g.(e.g., with respect to callbacks) ora lingering retransmission to dealdealing with a previously lostreply.reply by retransmitting. As a result, any slot sequence returned by that operation would be of no use. Theexistingoriginal treatmentgoeswent so far as to say that it"MUST NOT""<bcp14>MUST NOT</bcp14>" be used, although this usageiswas not in accord with <xreftarget="RFC2119"/>.target="RFC2119" format="default"/>. This created a difficulty when an EXCHANGE_ID is done after Transparent State Migration since that slot sequence would need to be used in a subsequent CREATE_SESSION.<vspace blankLines="1"/></t> <t> In the updated treatment, CREATE_SESSION is a way that client IDs areconfirmedconfirmed, but it is understood that other ways are possible. The slot sequence can be used asneededneeded, and cases in which it would be of no use are appropriately noted. </t> </li> <li> <t> Itwashad been assumed that the only functions of EXCHANGE_ID were to inform the server of the client, to create the client ID, and to communicate it to the client. When multiple simultaneous connections are involved, as often happens when trunking, that treatment was inadequate in that it ignored the role of EXCHANGE_ID in associating the client ID with the connection on which it was done, so that it could be used by a subsequentCREATE_SESSSION,CREATE_SESSION whose parameters do not include an explicit client ID.<vspace blankLines="1"/></t> <t> The new treatment explicitly discusses the role of EXCHANGE_ID in associating the client ID with the connection so it can be used by CREATE_SESSION and in associating a connection with an existing session. </t></list> </t></li> </ul> <t> The new treatment can be found in <xreftarget="OP_EXCHANGE_ID"/>target="OP_EXCHANGE_ID" format="default"/> above. It supersedes the treatment in Section18.35<xref target="RFC5661" sectionFormat="bare" section="18.35"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>. </t> </section> <sectiontitle="Revision toanchor="OTH-rc" toc="exclude" numbered="true"> <name>Revision of Treatment ofRECLAIM_COMPLETE" anchor="OTH-rc" toc="exclude">RECLAIM_COMPLETE</name> <t> The following changes were made to the treatment of RECLAIM_COMPLETE inRFC5661RFC 5661 <xreftarget="RFC5661"/>target="RFC5661" format="default"/> to arrive at the treatment in <xreftarget="OP_RECLAIM_COMPLETE"/>. <list style="symbols"> <t>target="OP_RECLAIM_COMPLETE" format="default"/>: </t> <ul spacing="normal"> <li> In a number ofplacesplaces, the textiswas made more explicit about the purpose of rca_one_fs and its connection to file system migration.</t> <t></li> <li> There is a discussion of situations in which particular forms of RECLAIM_COMPLETE would need to be done.</t> <t></li> <li> There is a discussion of interoperability issuesthat result frombetween implementations that may have arisen due to the lack of clarity of the previous treatment of RECLAIM_COMPLETE.</t> </list> </t></li> </ul> </section> </section> <sectiontitle="Revisionsanchor="CHG-errs" numbered="true" toc="default"> <name>Revisions Made to Error Definitions inRFC5661" anchor="CHG-errs">RFC 5661</name> <t> The new handling of various situations required revisionsofto some existing errordefinition: <list style="symbols">definitions: </t> <ul spacing="normal"> <li> <t> Because of the need to appropriately address trunking-related issues, some uses of the term "replica" inRFC5661RFC 5661 <xreftarget="RFC5661"/> have becometarget="RFC5661" format="default"/> became problematicsincebecause a shift in network access paths was considered to be a shift to a different replica. As a result, theexistingoriginal definition of NFS4ERR_MOVED (in Section15.1.2.4<xref target="RFC5661" sectionFormat="bare" section="15.1.2.4"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>)needs to bewas updated to reflect the different handling of unavailability of a particular fs via a specific network address.<vspace blankLines="1"/></t> <t> Since such a situation is no longer considered to constitute unavailability of a file system instance, the descriptionneeds to changehas been changed, even though the set of circumstances in which it is to be returnedremainremains the same. The new paragraph explicitly recognizes that a different network address might be used, while the previous description, misleadingly, treated this as a shift between two replicas while only a single file system instance might be involved. The updated description appears in <xreftarget="err_MOVED"/> below.target="err_MOVED" format="default"/>. </t><t></li> <li> Because of the need to accommodate the use of fs-specific grace periods, itiswas necessary to clarify some of theerrordefinitions of reclaim-related errors in Section15<xref target="RFC5661" sectionFormat="bare" section="15"/> ofRFC5661RFC 5661 <xreftarget="RFC5661"/>,target="RFC5661"/> so that the text applies properly to reclaims for all types of grace periods. The updated descriptions appear within <xreftarget="errors_reclaim"/> below. </t> <t>target="errors_reclaim" format="default"/>. </li> <li> Because of the need to provide the clarifications in errata report 2006 <xreftarget="Err2006"/>target="Err2006" format="default"/> and to adapt these to properly explain the interaction of NFS4ERR_DELAY with thereplayreply cache, a revised description of NFS4ERR_DELAY appears in <xreftarget="err_DELAY"/>.target="err_DELAY" format="default"/>. This errata report, unlike many otherRFC5661RFC 5661 errata reports, is addressed in this document because of the extensive use of NFS4ERR_DELAY in connection with state migration and session migration.</t> </list> </t></li> </ul> </section> <sectiontitle="Otheranchor="CHG-other" numbered="true" toc="default"> <name>Other Revisions Made toRFC5661" anchor="CHG-other">RFC 5661</name> <t>BesideBesides the major reworking of Section11<xref target="RFC5661" sectionFormat="bare" section="11"/> of RFC 5661 <xref target="RFC5661"/> and the associated revisions to existing operations and errors, therearewere a number of related changes thatarewere necessary:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The summarythat appearedin Section1.7.3.3<xref target="RFC5661" sectionFormat="bare" section="1.7.3.3"/> ofRFC5661RFC 5661 <xref target="RFC5661"/> was revised to reflect the changes madein the revisedto <xreftarget="NEW11"/>target="NEW11" format="default"/> above. The updated summary appears as <xreftarget="PREP-intro"/>target="PREP-intro" format="default"/> above.</t> <t></li> <li> The discussion of server scopewhich appearedin Section2.10.4<xref target="RFC5661" sectionFormat="bare" section="2.10.4"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>needed to be replaced,was replaced sincethe previous text appearsit appeared to require a level of inter-serverco-ordinationcoordination incompatible with its basic function of avoiding the need for a globally uniform means of assigning server_owner values. A revised treatment appears in <xreftarget="Server_Scope"/>. </t> <t>target="Server_Scope" format="default"/>. </li> <li> The discussion of trunkingwhich appearedin Section2.10.5<xref target="RFC5661" sectionFormat="bare" section="2.10.5"/> ofRFC5661RFC 5661 <xref target="RFC5661"/>needed to be revised,was revised to more clearly explain the multiple types of trunking support and how the client can be made aware of the existing trunking configuration. In addition, while the last paragraph (exclusive ofsub-sections)subsections) of thatsection,section dealing with server_ownerchanges, ischanges was literally true, ithashad been a source of confusion. Since theexistingoriginal paragraphcancould be read as suggesting that such changes bedealt with non-disruptively,handled nondisruptively, the issueneeds to bewas clarified in the revisedsection, which appears in<xreftarget="Trunking"/>. </t> </list> </t>target="Trunking" format="default"/>. </li> </ul> </section> </section> <sectiontitle="Securityanchor="SECBAD" numbered="true" toc="default"> <name>Security IssuesthatThat Need tobe Addressed" anchor="SECBAD">Be Addressed</name> <t> The following issues in the treatment of security within the NFSv4.1 specification need to be addressed:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The Security Considerations Section ofRFC5661RFC 5661 <xref target="RFC5661"/> isformat="default"/> was not written inaccordaccordance withRFC3552RFC 3552 (BCP 72) <xref target="RFC3552"/> (also BCP72).format="default"/>. Of particular concerniswas the fact that the sectiondoesdid not contain a threat analysis.</t> <t></li> <li> Initial analysis of the existing security issues with NFSv4.1 has made it likely that a revised Security ConsiderationsSectionsection for the existing protocol (one containing a threat analysis) would be likely to conclude that NFSv4.1 does not meet the goal of secure use on theinternet. </t> </list> </t>Internet. </li> </ul> <t> The Security ConsiderationsSectionsection of this document(in <xref target="SECCON"/>)(<xref target="SECCON" format="default"/>) has not been thoroughly revised to correct the difficulties mentioned above. Instead, it has been modified to take proper account of issues related to the multi-server namespace features discussed in <xreftarget="NEW11"/>,target="NEW11" format="default"/>, leaving the incomplete discussion and security weaknesses pretty much as they were. </t> <t> The following major security issues need to be addressed in a satisfactory fashion before an updated Security Considerations section can be published as part of a bis document for NFSv4.1:<list style="symbols"></t> <ul spacing="normal"> <li> <t> The continued use of AUTH_SYS and the security exposures it createsneedsneed to be addressed. Addressing this issue must not be limited to the questions of whether the designation of this asOPTIONAL<bcp14>OPTIONAL</bcp14> was justified and whether it should be changed.<vspace blankLines='1'/></t> <t> In any event, it may not bepossible,possible at thispoint,point to correct the security problems created by continued use of AUTH_SYS simply by revising this designation. </t> </li> <li> <t> The lack of attention within the protocol to the possibility of pervasive monitoring attacks such as those described inRFC7258RFC 7258 <xreftarget="RFC7258"/>target="RFC7258" format="default"/> (alsoBCP188). <vspace blankLines='1'/>BCP 188). </t> <t> In that connection, the use of CREATE_SESSION without privacy protection needs to be addressed as it exposes the session ID to view by an attacker. This is worrisome as this is precisely the type of protocol artifact alluded to inRFC7258,RFC 7258, which can enable further mischief on the part of the attacker as it enables denial-of-service attackswhichthat can be executed effectively with only a single, normally low-value, credential, even when RPCSEC_GSS authentication is in use. </t> </li> <li> <t> The lack of effective use of privacy and integrity, even where the infrastructure to support use of RPCSEC_GSSinis present, needs to be addressed.<vspace blankLines='1'/></t> <t> In light of the security exposures that this situation creates, it is not enough to define a protocol thatcould,could address this problem with the provision of sufficientresources, address the problem.resources. Instead, what is needed is a way to provide the necessarysecurity,security with very limited performance costs and without requiring securityinfrastructure thatinfrastructure, which experience has shown is difficult for many clients and servers to provide. </t></list> </t></li> </ul> <t> In trying to provide a major security upgrade for a deployed protocol such as NFSv4.1, the workinggroup,group and theinternetInternet communityisare likely to finditselfthemselves dealing with a number of considerations such as the following:<list style="symbols"> <t></t> <ul spacing="normal"> <li> The need to accommodate existing deployments ofexistingprotocolsasspecified previously in existing Proposed Standards.</t> <t></li> <li> The difficulty of effecting changes toexistingexisting, interoperating implementations.</t> <t></li> <li> The difficulty of making changes to NFSv4 protocols other than those in the form ofOPTIONAL<bcp14>OPTIONAL</bcp14> extensions.</t> <t></li> <li> The tendency of those responsible for existing NFSv4 deployments to ignore security flaws in the context of local area networks under the mistaken impression that network isolation provides, in and of itself, isolation from all potential attackers.</t> </list> </t></li> </ul> <t> Given that the above-mentioned difficultiesmentioned aboveapply to minor version zero as well, it may make sense to deal with these security issues in a common documentapplyingthat applies to all NFSv4 minor versions. If that approach istaken the,taken, the Security Considerations section of an eventual NFv4.1 bis document would reference that commondocumentdocument, and the defining RFCs for other minor versions might do so as well. </t> </section> <sectiontitle="Acknowledgments">numbered="false" toc="default"> <name>Acknowledgments</name> <sectiontitle="Acknowledgmentstoc="exclude" numbered="false"> <name>Acknowledgments forthis Update" toc="exclude">This Update</name> <t> The authors wish to acknowledge the important role ofAndy Adamson<contact fullname="Andy Adamson"/> of Netapp in clarifying the need for trunking discovery functionality, and exploring the role of the file system location attributes in providing the necessary support. </t> <t> The authors wish to thankTom Haynes<contact fullname="Tom Haynes"/> of Hammerspace for drawing our attention to the fact that internationalization and security might best be handled in documents dealing with such protocol issues as they apply to all NFSv4 minor versions. </t> <t> The authors also wish to acknowledge the work ofXuan Qi<contact fullname="Xuan Qi"/> of Oracle with NFSv4.1 client and server prototypes oftransparent state migrationTransparent State Migration functionality. </t> <t> The authors wish to thank others that brought attention to important issues. The comments ofTrond Myklebust<contact fullname="Trond Myklebust"/> of Primary Data related to trunking helped to clarify the role of DNS in trunking discovery.Rick Macklem's<contact fullname="Rick Macklem"/>'s comments brought attention to problems in the handling of the per-fs version of RECLAIM_COMPLETE. </t> <t> The authors wish to thankOlga Kornievskaia<contact fullname="Olga Kornievskaia"/> of Netapp for her helpful review comments. </t> </section> <sectiontitle="Acknowledgmentstoc="exclude" numbered="false"> <name>Acknowledgments forRFC5661" toc="exclude">RFC 5661</name> <t> The initial text for the SECINFO extensions were edited byMike Eisler<contact fullname="Mike Eisler"/> with contributions fromPeng Dai, Sergey Klyushin, and Carl Burnett.<contact fullname="Peng Dai"/>, <contact fullname="Sergey Klyushin"/>, and <contact fullname="Carl Burnett"/>. </t> <t> The initial text for the SESSIONS extensions were edited byTom Talpey, Spencer Shepler, Jon Bauman<contact fullname="Tom Talpey"/>, <contact fullname="Spencer Shepler"/>, <contact fullname="Jon Bauman"/> with contributions fromCharles Antonelli, Brent Callaghan, Mike Eisler, John Howard, Chet Juszczak, Trond Myklebust, Dave Noveck, John Scott, Mike Stolarchuk, and Mark Wittle.<contact fullname="Charles Antonelli"/>, <contact fullname="Brent Callaghan"/>, <contact fullname="Mike Eisler"/>, <contact fullname="John Howard"/>, <contact fullname="Chet Juszczak"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Dave Noveck"/>, <contact fullname="John Scott"/>, <contact fullname="Mike Stolarchuk"/>, and <contact fullname="Mark Wittle"/>. </t> <t> Initial text relating to multi-server namespace features, including the concept of referrals, were contributed byDave Noveck, Carl Burnett, and Charles Fan<contact fullname="Dave Noveck"/>, <contact fullname="Carl Burnett"/>, and <contact fullname="Charles Fan"/> with contributions fromTed Anderson, Neil Brown, and Jon Haswell.<contact fullname="Ted Anderson"/>, <contact fullname="Neil Brown"/>, and <contact fullname="Jon Haswell"/>. </t> <t> The initial text for the Directory Delegations support were contributed bySaadia Khan<contact fullname="Saadia Khan"/> with input fromDave Noveck, Mike Eisler, Carl Burnett, Ted Anderson, and Tom Talpey.<contact fullname="Dave Noveck"/>, <contact fullname="Mike Eisler"/>, <contact fullname="Carl Burnett"/>, <contact fullname="Ted Anderson"/>, and <contact fullname="Tom Talpey"/>. </t> <t> The initial text for the ACL explanations were contributed bySam Falkner and Lisa Week.<contact fullname="Sam Falkner"/> and <contact fullname="Lisa Week"/>. </t> <t> The pNFS work was inspired by the NASD and OSD work done byGarth Gibson. Gary Grider<contact fullname="Garth Gibson"/>. <contact fullname="Gary Grider"/> has also been a champion of high-performance parallel I/O.Garth Gibson and Peter Corbett<contact fullname="Garth Gibson"/> and <contact fullname="Peter Corbett"/> started the pNFS effort with a problem statement document for the IETF that formed the basis for the pNFS work in NFSv4.1. </t> <t> The initial text for the parallel NFS support was edited byBrent Welch and Garth Goodson.<contact fullname="Brent Welch"/> and <contact fullname="Garth Goodson"/>. Additional authors for those documents wereBenny Halevy, David Black,<contact fullname="Benny Halevy"/>, <contact fullname="David Black"/>, andAndy Adamson.<contact fullname="Andy Adamson"/>. Additional input came from the informal group that contributed to the construction of the initial pNFS drafts; specific acknowledgment goes toGary Grider, Peter Corbett, Dave Noveck, Peter Honeyman,<contact fullname="Gary Grider"/>, <contact fullname="Peter Corbett"/>, <contact fullname="Dave Noveck"/>, <contact fullname="Peter Honeyman"/>, andStephen Fridella.<contact fullname="Stephen Fridella"/>. </t> <t>Fredric Isaman<contact fullname="Fredric Isaman"/> found several errors in draft versions of the ONC RPC XDR description of the NFSv4.1 protocol. </t> <t>Audrey<contact fullname="Audrey VanBelleghemBelleghem"/> provided, in numerous ways, essentialco-ordinationcoordination and management of the process of editing the specification documents. </t> <t>Richard Jernigan<contact fullname="Richard Jernigan"/> gave feedback on the file layout's striping pattern design. </t> <t> Several formal inspection teams were formed to review various areas of the protocol. All the inspections found significant errors and room for improvement. NFSv4.1's inspection teams were:<list style="symbols"> <t></t> <ul spacing="normal"> <li><t> ACLs, with the following inspectors:Sam Falkner, Bruce Fields, Rahul Iyer, Saadia Khan, Dave Noveck, Lisa Week, Mario Wurzl, and Alan Yoder. </t> <t><contact fullname="Sam Falkner"/>, <contact fullname="Bruce Fields"/>, <contact fullname="Rahul Iyer"/>, <contact fullname="Saadia Khan"/>, <contact fullname="Dave Noveck"/>, <contact fullname="Lisa Week"/>, <contact fullname="Mario Wurzl"/>, and <contact fullname="Alan Yoder"/>.</t> </li> <li><t> Sessions, with the following inspectors:William Brown, Tom Doeppner, Robert Gordon, Benny Halevy, Fredric Isaman, Rick Macklem, Trond Myklebust, Dave Noveck, Karen Rochford, John Scott, and Peter Shah. </t> <t><contact fullname="William Brown"/>, <contact fullname="Tom Doeppner"/>, <contact fullname="Robert Gordon"/>, <contact fullname="Benny Halevy"/>, <contact fullname="Fredric Isaman"/>, <contact fullname="Rick Macklem"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Dave Noveck"/>, <contact fullname="Karen Rochford"/>, <contact fullname="John Scott"/>, and <contact fullname="Peter Shah"/>.</t> </li> <li><t> Initial pNFS inspection, with the following inspectors:Andy Adamson, David Black, Mike Eisler, Marc Eshel, Sam Falkner, Garth Goodson, Benny Halevy, Rahul Iyer, Trond Myklebust, Spencer Shepler, and Lisa Week. </t> <t><contact fullname="Andy Adamson"/>, <contact fullname="David Black"/>, <contact fullname="Mike Eisler"/>, <contact fullname="Marc Eshel"/>, <contact fullname="Sam Falkner"/>, <contact fullname="Garth Goodson"/>, <contact fullname="Benny Halevy"/>, <contact fullname="Rahul Iyer"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Spencer Shepler"/>, and <contact fullname="Lisa Week"/>.</t> </li> <li><t> Global namespace, with the following inspectors:Mike Eisler, Dan Ellard, Craig Everhart, Fredric Isaman, Trond Myklebust, Dave Noveck, Theresa Raj, Spencer Shepler, Renu Tewari,<contact fullname="Mike Eisler"/>, <contact fullname="Dan Ellard"/>, <contact fullname="Craig Everhart"/>, <contact fullname="Fredric Isaman"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Dave Noveck"/>, <contact fullname="Theresa Raj"/>, <contact fullname="Spencer Shepler"/>, <contact fullname="Renu Tewari"/>, andRobert Thurlow. </t> <t><contact fullname="Robert Thurlow"/>.</t> </li> <li><t> NFSv4.1 file layout type, with the following inspectors:Andy Adamson, Marc Eshel, Sam Falkner, Garth Goodson, Rahul Iyer, Trond Myklebust, and Lisa Week. </t> <t><contact fullname="Andy Adamson"/>, <contact fullname="Marc Eshel"/>, <contact fullname="Sam Falkner"/>, <contact fullname="Garth Goodson"/>, <contact fullname="Rahul Iyer"/>, <contact fullname="Trond Myklebust"/>, and <contact fullname="Lisa Week"/>.</t> </li> <li><t> NFSv4.1 locking and directory delegations, with the following inspectors:Mike Eisler, Pranoop Erasani, Robert Gordon, Saadia Khan, Eric Kustarz, Dave Noveck, Spencer Shepler, and Amy Weaver. </t> <t><contact fullname="Mike Eisler"/>, <contact fullname="Pranoop Erasani"/>, <contact fullname="Robert Gordon"/>, <contact fullname="Saadia Khan"/>, <contact fullname="Eric Kustarz"/>, <contact fullname="Dave Noveck"/>, <contact fullname="Spencer Shepler"/>, and <contact fullname="Amy Weaver"/>.</t> </li> <li><t> EXCHANGE_ID and DESTROY_CLIENTID, with the following inspectors:Mike Eisler, Pranoop Erasani, Robert Gordon, Benny Halevy, Fredric Isaman, Saadia Khan, Ricardo Labiaga, Rick Macklem, Trond Myklebust, Spencer Shepler, and Brent Welch. </t> <t><contact fullname="Mike Eisler"/>, <contact fullname="Pranoop Erasani"/>, <contact fullname="Robert Gordon"/>, <contact fullname="Benny Halevy"/>, <contact fullname="Fredric Isaman"/>, <contact fullname="Saadia Khan"/>, <contact fullname="Ricardo Labiaga"/>, <contact fullname="Rick Macklem"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Spencer Shepler"/>, and <contact fullname="Brent Welch"/>.</t> </li> <li><t> Final pNFS inspection, with the following inspectors:Andy Adamson, Mike Eisler, Mark Eshel, Sam Falkner, Jason Glasgow, Garth Goodson, Robert Gordon, Benny Halevy, Dean Hildebrand, Rahul Iyer, Suchit Kaura, Trond Myklebust, Anatoly Pinchuk, Spencer Shepler, Renu Tewari, Lisa Week, and Brent Welch. </t> </list> </t><contact fullname="Andy Adamson"/>, <contact fullname="Mike Eisler"/>, <contact fullname="Mark Eshel"/>, <contact fullname="Sam Falkner"/>, <contact fullname="Jason Glasgow"/>, <contact fullname="Garth Goodson"/>, <contact fullname="Robert Gordon"/>, <contact fullname="Benny Halevy"/>, <contact fullname="Dean Hildebrand"/>, <contact fullname="Rahul Iyer"/>, <contact fullname="Suchit Kaura"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Anatoly Pinchuk"/>, <contact fullname="Spencer Shepler"/>, <contact fullname="Renu Tewari"/>, <contact fullname="Lisa Week"/>, and <contact fullname="Brent Welch"/>.</t> </li> </ul> <t> A review team worked together to generate the tables of assignments of error sets to operations and make sure that each such assignment had two or more people validating it. Participating in the process wereAndy Adamson, Mike Eisler, Sam Falkner, Garth Goodson, Robert Gordon, Trond Myklebust, Dave Noveck, Spencer Shepler, Tom Talpey, Amy Weaver, and Lisa Week. </t> <t> Jari Arkko, David Black, Scott Bradner, Lisa Dusseault, Lars Eggert, Chris Newman, and Tim Polk<contact fullname="Andy Adamson"/>, <contact fullname="Mike Eisler"/>, <contact fullname="Sam Falkner"/>, <contact fullname="Garth Goodson"/>, <contact fullname="Robert Gordon"/>, <contact fullname="Trond Myklebust"/>, <contact fullname="Dave Noveck"/>, <contact fullname="Spencer Shepler"/>, <contact fullname="Tom Talpey"/>, <contact fullname="Amy Weaver"/>, and <contact fullname="Lisa Week"/>. </t> <t> <contact fullname="Jari Arkko"/>, <contact fullname="David Black"/>, <contact fullname="Scott Bradner"/>, <contact fullname="Lisa Dusseault"/>, <contact fullname="Lars Eggert"/>, <contact fullname="Chris Newman"/>, and <contact fullname="Tim Polk"/> provided valuable review and guidance. </t> <t>Olga Kornievskaia<contact fullname="Olga Kornievskaia"/> found several errors in the SSV specification. </t> <t>Ricardo Labiaga<contact fullname="Ricardo Labiaga"/> found several places where the use of RPCSEC_GSS was underspecified. </t> <t> Those who provided miscellaneous comments include:Andy Adamson, Sunil Bhargo, Alex Burlyga, Pranoop Erasani, Bruce Fields, Vadim Finkelstein, Jason Goldschmidt, Vijay<contact fullname="Andy Adamson"/>, <contact fullname="Sunil Bhargo"/>, <contact fullname="Alex Burlyga"/>, <contact fullname="Pranoop Erasani"/>, <contact fullname="Bruce Fields"/>, <contact fullname="Vadim Finkelstein"/>, <contact fullname="Jason Goldschmidt"/>, <contact fullname="Vijay K.Gurbani, Sergey Klyushin, Ricardo Labiaga, James Lentini, Anshul Madan, Daniel Muntz, Daniel Picken, Archana Ramani, Jim Rees, Mahesh Siddheshwar, Tom Talpey, and Peter Varga.Gurbani"/>, <contact fullname="Sergey Klyushin"/>, <contact fullname="Ricardo Labiaga"/>, <contact fullname="James Lentini"/>, <contact fullname="Anshul Madan"/>, <contact fullname="Daniel Muntz"/>, <contact fullname="Daniel Picken"/>, <contact fullname="Archana Ramani"/>, <contact fullname="Jim Rees"/>, <contact fullname="Mahesh Siddheshwar"/>, <contact fullname="Tom Talpey"/>, and <contact fullname="Peter Varga"/>. </t> </section> </section> </back> </rfc>