wdiff rfc8941v1.txt rfc8941.txt

Internet Engineering Task Force (IETF) M. Nottingham
Request for Comments: 8941 Fastly
Category: Standards Track P-H. Kamp
ISSN: 2070-1721 The Varnish Cache Project
October 2020
February 2021

Structured Field Values for HTTP

Abstract

This document describes a set of data types and associated algorithms
that are intended to make it easier and safer to define and handle
HTTP header and trailer fields, known as "Structured Fields",
"Structured Headers", or "Structured Trailers". It is intended for
use by specifications of new HTTP fields that wish to use a common
syntax that is more restrictive than traditional HTTP field values.

Status of This Memo

This is an Internet Standards Track document.

This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.

Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8941.

This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.

Table of Contents

1. Introduction
1.1. Intentionally Strict Processing
1.2. Notational Conventions
2. Defining New Structured Fields
3. Structured Data Types
3.1. Lists
3.1.1. Inner Lists
3.1.2. Parameters
3.2. Dictionaries
3.3. Items
3.3.1. Integers
3.3.2. Decimals
3.3.3. Strings
3.3.4. Tokens
3.3.5. Byte Sequences
3.3.6. Booleans
4. Working with Structured Fields in HTTP
4.1. Serializing Structured Fields
4.1.1. Serializing a List
4.1.2. Serializing a Dictionary
4.1.3. Serializing an Item
4.1.4. Serializing an Integer
4.1.5. Serializing a Decimal
4.1.6. Serializing a String
4.1.7. Serializing a Token
4.1.8. Serializing a Byte Sequence
4.1.9. Serializing a Boolean
4.2. Parsing Structured Fields
4.2.1. Parsing a List
4.2.2. Parsing a Dictionary
4.2.3. Parsing an Item
4.2.4. Parsing an Integer or Decimal
4.2.5. Parsing a String
4.2.6. Parsing a Token
4.2.7. Parsing a Byte Sequence
4.2.8. Parsing a Boolean
5. IANA Considerations
6. Security Considerations
7. References
7.1. Normative References
7.2. Informative References
Appendix A. Frequently Asked Questions
A.1. Why Not JSON?
Appendix B. Implementation Notes
Acknowledgements
Authors' Addresses

1. Introduction

Specifying the syntax of new HTTP header (and trailer) fields is an
onerous task; even with the guidance in Section 8.3.1 of [RFC7231],
there are many decisions -- and pitfalls -- for a prospective HTTP
field author.

Once a field is defined, bespoke parsers and serializers often need
to be written, because each field value has a slightly different
handling of what looks like common syntax.

This document introduces a set of common data structures for use in
definitions of new HTTP field values to address these problems. In
particular, it defines a generic, abstract model for them, along with
a concrete serialization for expressing that model in HTTP [RFC7230]
header and trailer fields.

An HTTP field that is defined as a "Structured Header" or "Structured
Trailer" (if the field can be either, it is a "Structured Field")
uses the types defined in this specification to define its syntax and
basic handling rules, thereby simplifying both its definition by
specification writers and handling by implementations.

Additionally, future versions of HTTP can define alternative
serializations of the abstract model of these structures, allowing
fields that use that model to be transmitted more efficiently without
being redefined.

Note that it is not a goal of this document to redefine the syntax of
existing HTTP fields; the mechanisms described herein are only
intended to be used with fields that explicitly opt into them.

Section 2 describes how to specify a Structured Field.

Section 3 defines a number of abstract data types that can be used in
Structured Fields.

Those abstract types can be serialized into and parsed from HTTP
field values using the algorithms described in Section 4.

1.1. Intentionally Strict Processing

This specification intentionally defines strict parsing and
serialization behaviors using step-by-step algorithms; the only error
handling defined is to fail the operation altogether.

It is designed to encourage faithful implementation and therefore good
interoperability. Therefore, an implementation that tried to be
helpful by being more tolerant of input would make interoperability
worse, since that would create pressure on other implementations to
implement similar (but likely subtly different) workarounds.

In other words, strict processing is an intentional feature of this
specification; it allows non-conformant input to be discovered and
corrected by the producer early and avoids both interoperability and
security issues that might otherwise result.

Note that as a result of this strictness, if a field is appended to
by multiple parties (e.g., intermediaries or different components in
the sender), an error in one party's value is likely to cause the
entire field value to fail parsing.

1.2. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.

This document uses algorithms to specify parsing and serialization
behaviors and the Augmented Backus-Naur Form (ABNF) notation of
[RFC5234] to illustrate expected syntax in HTTP header fields. In
doing so, it uses the VCHAR, SP, DIGIT, ALPHA, and DQUOTE rules from
[RFC5234]. It also includes the tchar and OWS rules from [RFC7230].

When parsing from HTTP fields, implementations MUST have behavior
that is indistinguishable from following the algorithms. If there is
disagreement between the parsing algorithms and ABNF, the specified
algorithms take precedence.

For serialization to HTTP fields, the ABNF illustrates their expected
wire representations, and the algorithms define the recommended way
to produce them. Implementations MAY vary from the specified
behavior so long as the output is still correctly handled by the
parsing algorithm. algorithm described in Section 4.2.

2. Defining New Structured Fields

To specify an HTTP field as a Structured Field, its authors need to:

* Normatively reference this specification. Recipients and
generators of the field need to know that the requirements of this
document are in effect.

* Identify whether the field is a Structured Header (i.e., it can
only be used in the header section -- the common case), a
Structured Trailer (only in the trailer section), or a Structured
Field (both).

* Specify the type of the field value; either List (Section 3.1),
Dictionary (Section 3.2), or Item (Section 3.3).

* Define the semantics of the field value.

* Specify any additional constraints upon the field value, as well
as the consequences when those constraints are violated.

Typically, this means that a field definition will specify the top-
level type -- List, Dictionary, or Item -- and then define its
allowable types and constraints upon them. For example, a header
defined as a List might have all Integer members, or a mix of types;
a header defined as an Item might allow only Strings, and
additionally only strings beginning with the letter "Q", or strings
in lowercase. Likewise, Inner Lists (Section 3.1.1) are only valid
when a field definition explicitly allows them.

When parsing fails, the entire field is ignored (see Section 4.2); in
most situations, violating field-specific constraints should have the
same effect. Thus, if a header is defined as an Item and required to
be an Integer, but a String is received, the field will by default be
ignored. If the field requires different error handling, this should
be explicitly specified.

Both Items and Inner Lists allow parameters as an extensibility
mechanism; this means that values can later be extended to
accommodate more information, if need be. To preserve forward
compatibility, field specifications are discouraged from defining the
presence of an unrecognized Parameter parameter as an error condition.

To further assure that this extensibility is available in the future,
and to encourage consumers to use a complete parser implementation, a
field definition can specify that "grease" Parameters parameters be added by
senders. A specification could stipulate that all Parameters parameters that
fit a defined pattern are reserved for this use and then encourage
them to be sent on some portion of requests. This helps to
discourage recipients from writing a parser that does not account for
Parameters.

Specifications that use Dictionaries can also allow for forward
compatibility by requiring that the presence of -- as well as value
and type associated with -- unknown members be ignored. Later, Subsequent
specifications can then add additional members, specifying
constraints on them as appropriate.

An extension to a structured field Structured Field can then require that an entire
field value be ignored by a recipient that understands the extension
if constraints on the value it defines are not met.

A field definition cannot relax the requirements of this
specification because doing so would preclude handling by generic
software; they can only add additional constraints (for example, on
the numeric range of Integers and Decimals, the format of Strings and
Tokens, the types allowed in a Dictionary's values, or the number of
Items in a List). Likewise, field definitions can only use this
specification for the entire field value, not a portion thereof.

This specification defines minimums for the length or number of
various structures supported by implementations. It does not specify
maximum sizes in most cases, but authors should be aware that HTTP
implementations do impose various limits on the size of individual
fields, the total number of fields, and/or the size of the entire
header or trailer section.

Specifications can refer to a field name as a "structured header
name", "structured trailer name", or "structured field name" as
appropriate. Likewise, they can refer its field value as a
"structured header value", "structured trailer value", or "structured
field value" as necessary. Field definitions are encouraged to use
the ABNF rules beginning with "sf-" defined in this specification;
other rules in this specification are not intended for their use. to be used in
field definitions.

For example, a fictitious Foo-Example header field might be specified
as:

--8<--

| 42. Foo-Example Header
|
| The Foo-Example HTTP header field conveys information about how
| much Foo the message has.
|
| Foo-Example is an Item Structured Header [RFCxxxx]. [RFC8941]. Its value
| MUST be an Integer (Section Y.Y 3.3.1 of [RFCxxxx]). [RFC8941]). Its ABNF is:
|
| Foo-Example = sf-integer
|
| Its value indicates the amount of Foo in the message, and it MUST
| be between 0 and 10, inclusive; other values MUST cause the entire
| header field to be ignored.
|
| The following parameters are parameter is defined:
| * A Parameter parameter whose name key is "foourl", and whose value is a String
| (Section Y.Y 3.3.3 of [RFCxxxx]), [RFC8941]), conveying the Foo URL for the
| message. See below for processing requirements.
|
| "foourl" contains a URI-reference (Section 4.1 of [RFC3986]). If
| its value is not a valid URI-reference, the entire header field
| MUST be ignored. If its value is a relative reference
| (Section 4.2 of [RFC3986]), it MUST be resolved (Section 5 of
| [RFC3986]) before being used.
|
| For example:
|
| Foo-Example: 2; foourl="https://foo.example.com/"
-->8--

3. Structured Data Types

This section defines the abstract types for Structured Fields. The
ABNF provided represents the on-wire format in HTTP field values.

In summary:

* There are three top-level types that an HTTP field can be defined
as: Lists, Dictionaries, and Items.

* Lists and Dictionaries are containers; their members can be Items
or Inner Lists (which are themselves arrays of Items).

* Both Items and Inner Lists can be parameterized Parameterized with key/value
pairs.

3.1. Lists

Lists are arrays of zero or more members, each of which can be an
Item (Section 3.3) or an Inner List (Section 3.1.1), both of which
can be Parameterized (Section 3.1.2).

The ABNF for Lists in HTTP fields is:

sf-list = list-member *( OWS "," OWS list-member )
list-member = sf-item / inner-list

Each member is separated by a comma and optional whitespace. For
example, a field whose value is defined as a List of Strings Tokens could
look like:

Example-StrList: "foo", "bar", "It was the best of times."

Example-List: sugar, tea, rum

An empty List is denoted by not serializing the field at all. This
implies that fields defined as Lists have a default empty value.

Note that Lists can have their members split across multiple lines
inside a of
the same header or trailer section, as per Section 3.2.2 of
[RFC7230]; for example, the following are equivalent:

Example-Hdr: foo, bar

and

Example-Hdr: foo
Example-Hdr: bar

Example-List: sugar, tea, rum

and

Example-List: sugar, tea
Example-List: rum

However, individual members of a List cannot be safely split between
lines; see Section 4.2 for details.

Parsers MUST support Lists containing at least 1024 members. Field
specifications can constrain the types and cardinality of individual
List values as they require.

3.1.1. Inner Lists

An Inner List is an array of zero or more Items (Section 3.3). Both
the individual Items and the Inner List itself can be Parameterized
(Section 3.1.2).

The ABNF for Inner Lists is:

inner-list = "(" *SP [ sf-item *( 1*SP sf-item ) *SP ] ")"
parameters

Inner Lists are denoted by surrounding parenthesis, and their values
are delimited by one or more spaces. A field whose value is defined
as a List of Inner Lists of Strings could look like:

Example-StrListList:

Example-List: ("foo" "bar"), ("baz"), ("bat" "one"), ()

Note that the last member in this example is an empty Inner List.

A header field whose value is defined as a List of Inner Lists with
Parameters at both levels could look like:

Example-ListListParam:

Example-List: ("foo"; a=1;b=2);lvl=5, ("bar" "baz");lvl=1

Parsers MUST support Inner Lists containing at least 256 members.
Field specifications can constrain the types and cardinality of
individual Inner List members as they require.

3.1.2. Parameters

Parameters are an ordered map of key-value pairs that are associated
with an Item (Section 3.3) or Inner List (Section 3.1.1). The keys
are unique within the scope of the Parameters they occur within, and
the values are bare items (i.e., they themselves cannot be
parameterized; see Section 3.3).

Implementations MUST provide access to Parameters both by index and
by key. Specifications MAY use either means of accessing them.

The ABNF for Parameters is:

parameters = *( ";" *SP parameter )
parameter = param-name param-key [ "=" param-value ]
param-name
param-key = key
key = ( lcalpha / "*" )
*( lcalpha / DIGIT / "_" / "-" / "." / "*" )
lcalpha = %x61-7A ; a-z
param-value = bare-item

Note that Parameters parameters are ordered as serialized, and Parameter parameter keys
cannot contain uppercase letters. A parameter is separated from its
Item or Inner List and other parameters by a semicolon. For example:

Example-ParamList:

Example-List: abc;a=1;b=2; cde_456, (ghi;jk=4 l);q="9";r=w

Parameters whose value is Boolean (see Section 3.3.6) true MUST omit
that value when serialized. For example, the "a" parameter here is
true, while the "b" parameter is false:

Example-Int:

Example-Integer: 1; a; b=?0

Note that this requirement is only on serialization; parsers are
still required to correctly handle the true value when it appears in
a parameter.

Parsers MUST support at least 256 parameters on an Item or Inner List
List, and support parameter keys with at least 64 characters. Field
specifications can constrain the order of individual Parameters, parameters, as
well as their values' types as required.

3.2. Dictionaries

Dictionaries are ordered maps of name-value key-value pairs, where the names keys are
short textual strings and the values are Items (Section 3.3) or
arrays of Items, both of which can be Parameterized (Section 3.1.2).
There can be zero or more members, and their names keys are unique in the
scope of the Dictionary they occur within.

Implementations MUST provide access to Dictionaries both by index and
by name. key. Specifications MAY use either means of accessing the
members.

The ABNF for Dictionaries is:

sf-dictionary = dict-member *( OWS "," OWS dict-member )
dict-member = member-name [ member-key ( parameters / ( "=" member-value ]
member-name ))
member-key = key
member-value = sf-item / inner-list

Members are ordered as serialized and separated by a comma with
optional whitespace. Member names keys cannot contain uppercase
characters. Names Keys and values are separated by "=" (without
whitespace). For example:

Example-Dict: en="Applepie", da=:w4ZibGV0w6ZydGU=:

Note that in this example, the final "=" is due to the inclusion of a
Byte Sequence; see Section 3.3.5.

Members whose value is Boolean (see Section 3.3.6) true MUST omit
that value when serialized. For example, here both "b" and "c" are
true:

Example-Dict: a=?0, b, c; foo=bar

Note that this requirement is only on serialization; parsers are
still required to correctly handle the true Boolean value when it
appears in Dictionary values.

A Dictionary with a member whose value is an Inner List of Tokens:

Example-DictList:

Example-Dict: rating=1.5, feelings=(joy sadness)

A Dictionary with a mix of Items and Inner Lists, some with
Parameters:

Example-MixDict:
parameters:

Example-Dict: a=(1 2), b=3, c=4;aa=bb, d=(5 6);valid

As with Lists, an empty Dictionary is represented by omitting the
entire field. This implies that fields defined as Dictionaries have
a default empty value.

Typically, a field specification will define the semantics of
Dictionaries by specifying the allowed type(s) for individual members
by their names, keys, as well as whether their presence is required or
optional. Recipients MUST ignore names members whose keys that are
undefined or unknown, unless the field's specification specifically
disallows them.

Note that Dictionaries can have their members split across multiple
lines inside a of the same header or trailer section; for example, the
following are equivalent:

Example-Hdr:

Example-Dict: foo=1, bar=2

and

Example-Hdr:

Example-Dict: foo=1
Example-Hdr:
Example-Dict: bar=2

However, individual members of a Dictionary cannot be safely split
between lines; see Section 4.2 for details.

Parsers MUST support Dictionaries containing at least 1024 name/value key/value
pairs and names keys with at least 64 characters. Field specifications can
constrain the order of individual Dictionary members, as well as
their values' types as required.

3.3. Items

An Item can be an Integer (Section 3.3.1), a Decimal (Section 3.3.2),
a String (Section 3.3.3), a Token (Section 3.3.4), a Byte Sequence
(Section 3.3.5), or a Boolean (Section 3.3.6). It can have
associated Parameters parameters (Section 3.1.2).

The ABNF for Items is:

sf-item = bare-item parameters
bare-item = sf-integer / sf-decimal / sf-string / sf-token
/ sf-binary / sf-boolean

For example, a header field that is defined to be an Item that is an
Integer might look like:

Example-IntItemHeader:

Example-Integer: 5

or with Parameters:

Example-IntItem: parameters:

Example-Integer: 5; foo=bar

3.3.1. Integers

Integers have a range of -999,999,999,999,999 to 999,999,999,999,999
inclusive (i.e., up to fifteen digits, signed), for IEEE 754
compatibility [IEEE754].

The ABNF for Integers is:

sf-integer = ["-"] 1*15DIGIT

For example:

Example-Integer: 42

Integers larger than 15 digits can be supported in a variety of ways;
for example, by using a String (Section 3.3.3), a Byte Sequence
(Section 3.3.5), or a parameter on an Integer that acts as a scaling
factor.

While it is possible to serialize Integers with leading zeros (e.g.,
"0002", "-01") and signed zero ("-0"), these distinctions may not be
preserved by implementations.

Note that commas in Integers are used in this section's prose only
for readability; they are not valid in the wire format.

3.3.2. Decimals

Decimals are numbers with an integer and a fractional component. The
integer component has at most 12 digits; the fractional component has
at most three digits.

The ABNF for decimals is:

sf-decimal = ["-"] 1*12DIGIT "." 1*3DIGIT

For example, a header whose value is defined as a Decimal could look
like:

Example-Decimal: 4.5

While it is possible to serialize Decimals with leading zeros (e.g.,
"0002.5", "-01.334"), trailing zeros (e.g., "5.230", "-0.40"), and
signed zero (e.g., "-0.0"), these distinctions may not be preserved
by implementations.

Note that the serialization algorithm (Section 4.1.5) rounds input
with more than three digits of precision in the fractional component.
If an alternative rounding strategy is desired, this should be
specified by the header definition to occur before serialization.

3.3.3. Strings

Strings are zero or more printable ASCII [RFC0020] characters (i.e.,
the range %x20 to %x7E). Note that this excludes tabs, newlines,
carriage returns, etc.

The ABNF for Strings is:

sf-string = DQUOTE *chr DQUOTE
chr = unescaped / escaped
unescaped = %x20-21 / %x23-5B / %x5D-7E
escaped = "\" ( DQUOTE / "\" )

Strings are delimited with double quotes, using a backslash ("\") to
escape double quotes and backslashes. For example:

Example-String: "hello world"

Note that Strings only use DQUOTE as a delimiter; single quotes do
not delimit Strings. Furthermore, only DQUOTE and "\" can be
escaped; other characters after "\" MUST cause parsing to fail.

Unicode is not directly supported in Strings, because it causes a
number of interoperability issues, and -- with few exceptions --
field values do not require it.

When it is necessary for a field value to convey non-ASCII content, a
Byte Sequence (Section 3.3.5) can be specified, along with a
character encoding (preferably [UTF-8]). UTF-8 [STD63]).

Parsers MUST support Strings (after any decoding) with at least 1024
characters.

3.3.4. Tokens

Tokens are short textual words; their abstract model is identical to
their expression in the HTTP field value serialization.

The ABNF for Tokens is:

sf-token = ( ALPHA / "*" ) *( tchar / ":" / "/" )

For example:

Example-Token: foo123/456

Parsers MUST support Tokens with at least 512 characters.

Note that Token allows the same characters as the "token" ABNF rule
defined in [RFC7230], with the exceptions that the first character is
required to be either ALPHA or "*", and ":" and "/" are also allowed
in subsequent characters.

3.3.5. Byte Sequences

Byte Sequences can be conveyed in Structured Fields.

The ABNF for a Byte Sequence is:

sf-binary = ":" *(base64) ":"
base64 = ALPHA / DIGIT / "+" / "/" / "="

A Byte Sequence is delimited with colons and encoded using base64
([RFC4648], Section 4). For example:

Example-Binary:

Example-ByteSequence: :cHJldGVuZCB0aGlzIGlzIGJpbmFyeSBjb250ZW50Lg==:

Parsers MUST support Byte Sequences with at least 16384 octets after
decoding.

3.3.6. Booleans

Boolean values can be conveyed in Structured Fields.

The ABNF for a Boolean is:

sf-boolean = "?" boolean
boolean = "0" / "1"

A Boolean is indicated with a leading "?" character followed by a "1"
for a true value or "0" for false. For example:

Example-Bool:

Example-Boolean: ?1

Note that in Dictionary (Section 3.2) and Parameter (Section 3.1.2)
values, Boolean true is indicated by omitting the value.

4. Working with Structured Fields in HTTP

This section defines how to serialize and parse Structured Fields in
textual HTTP field values and other encodings compatible with them
(e.g., in HTTP/2 [RFC7540] before compression with HPACK [RFC7541]).

4.1. Serializing Structured Fields

Given a structure defined in this specification, return an ASCII
string suitable for use in an HTTP field value.

1. If the structure is a Dictionary or List and its value is empty
(i.e., it has no members), do not serialize the field at all
(i.e., omit both the field-name and field-value).

2. If the structure is a List, let output_string be the result of
running Serializing a List (Section 4.1.1) with the structure.

3. Else, if the structure is a Dictionary, let output_string be the
result of running Serializing a Dictionary (Section 4.1.2) with
the structure.

4. Else, if the structure is an Item, let output_string be the
result of running Serializing an Item (Section 4.1.3) with the
structure.

5. Else, fail serialization.

6. Return output_string converted into an array of bytes, using
ASCII encoding [RFC0020].

4.1.1. Serializing a List

Given an array of (member_value, parameters) tuples as input_list,
return an ASCII string suitable for use in an HTTP field value.

1. Let output be an empty string.

2. For each (member_value, parameters) of input_list:

1. If member_value is an array, append the result of running
Serializing an Inner List (Section 4.1.1.1) with
(member_value, parameters) to output.

2. Otherwise, append the result of running Serializing an Item
(Section 4.1.3) with (member_value, parameters) to output.

3. If more member_values remain in input_list:

1. Append "," to output.

2. Append a single SP to output.

3. Return output.

4.1.1.1. Serializing an Inner List

Given an array of (member_value, parameters) tuples as inner_list,
and parameters as list_parameters, return an ASCII string suitable
for use in an HTTP field value.

1. Let output be the string "(".

2. For each (member_value, parameters) of inner_list:

1. Append the result of running Serializing an Item
(Section 4.1.3) with (member_value, parameters) to output.

2. If more values remain in inner_list, append a single SP to
output.

3. Append ")" to output.

4. Append the result of running Serializing Parameters
(Section 4.1.1.2) with list_parameters to output.

5. Return output.

4.1.1.2. Serializing Parameters

Given an ordered Dictionary as input_parameters (each member having a
param_name
param_key and a param_value), return an ASCII string suitable for use
in an HTTP field value.

1. Let output be an empty string.

2. For each param_name param_key with a value of param_value in
input_parameters:

1. Append ";" to output.

2. Append the result of running Serializing a Key
(Section 4.1.1.3) with param_name param_key to output.

3. If param_value is not Boolean true:

1. Append "=" to output.

2. Append the result of running Serializing a bare Item
(Section 4.1.3.1) with param_value to output.

3. Return output.

4.1.1.3. Serializing a Key

Given a key as input_key, return an ASCII string suitable for use in
an HTTP field value.

1. Convert input_key into a sequence of ASCII characters; if
conversion fails, fail serialization.

2. If input_key contains characters not in lcalpha, DIGIT, "_", "-",
".", or "*", fail serialization.

3. If the first character of input_key is not lcalpha or "*", fail
serialization.

4. Let output be an empty string.

5. Append input_key to output.

6. Return output.

4.1.2. Serializing a Dictionary

Given an ordered Dictionary as input_dictionary (each member having a
member_name
member_key and a tuple value of (member_value, parameters)), return
an ASCII string suitable for use in an HTTP field value.

1. Let output be an empty string.

2. For each member_name member_key with a value of (member_value, parameters) in
input_dictionary:

1. Append the result of running Serializing a Key
(Section 4.1.1.3) with member's member_name member_key to output.

2. If member_value is Boolean true:

1. Append the result of running Serializing Parameters
(Section 4.1.1.2) with parameters to output.

3. Otherwise:

1. Append "=" to output.

2. If member_value is an array, append the result of running
Serializing an Inner List (Section 4.1.1.1) with
(member_value, parameters) to output.

3. Otherwise, append the result of running Serializing an
Item (Section 4.1.3) with (member_value, parameters) to
output.

4. If more members remain in input_dictionary:

1. Append "," to output.

2. Append a single SP to output.

3. Return output.

4.1.3. Serializing an Item

Given an Item as bare_item and Parameters as item_parameters, return
an ASCII string suitable for use in an HTTP field value.

1. Let output be an empty string.

2. Append the result of running Serializing a Bare Item
(Section 4.1.3.1) with bare_item to output.

3. Append the result of running Serializing Parameters
(Section 4.1.1.2) with item_parameters to output.

4. Return output.

4.1.3.1. Serializing a Bare Item

Given an Item as input_item, return an ASCII string suitable for use
in an HTTP field value.

1. If input_item is an Integer, return the result of running
Serializing an Integer (Section 4.1.4) with input_item.

2. If input_item is a Decimal, return the result of running
Serializing a Decimal (Section 4.1.5) with input_item.

3. If input_item is a String, return the result of running
Serializing a String (Section 4.1.6) with input_item.

4. If input_item is a Token, return the result of running
Serializing a Token (Section 4.1.7) with input_item.

5. If input_item is a Boolean, Byte Sequence, return the result of running
Serializing a Boolean Byte Sequence (Section 4.1.9) 4.1.8) with input_item.

6. If input_item is a Byte Sequence, Boolean, return the result of running
Serializing a Byte Sequence Boolean (Section 4.1.8) 4.1.9) with input_item.

7. Otherwise, fail serialization.

4.1.4. Serializing an Integer

Given an Integer as input_integer, return an ASCII string suitable
for use in an HTTP field value.

1. If input_integer is not an integer in the range of
-999,999,999,999,999 to 999,999,999,999,999 inclusive, fail
serialization.

2. Let output be an empty string.

3. If input_integer is less than (but not equal to) 0, append "-" to
output.

4. Append input_integer's numeric value represented in base 10 using
only decimal digits to output.

5. Return output.

4.1.5. Serializing a Decimal

Given a decimal number as input_decimal, return an ASCII string
suitable for use in an HTTP field value.

1. If input_decimal is not a decimal number, fail serialization.

2. If input_decimal has more than three significant digits to the
right of the decimal point, round it to three decimal places,
rounding the final digit to the nearest value, or to the even
value if it is equidistant.

3. If input_decimal has more than 12 significant digits to the left
of the decimal point after rounding, fail serialization.

4. Let output be an empty string.

5. If input_decimal is less than (but not equal to) 0, append "-"
to output.

6. Append input_decimal's integer component represented in base 10
(using only decimal digits) to output; if it is zero, append
"0".

7. Append "." to output.

8. If input_decimal's fractional component is zero, append "0" to
output.

9. Otherwise, append the significant digits of input_decimal's
fractional component represented in base 10 (using only decimal
digits) to output.

10. Return output.

4.1.6. Serializing a String

Given a String as input_string, return an ASCII string suitable for
use in an HTTP field value.

1. Convert input_string into a sequence of ASCII characters; if
conversion fails, fail serialization.

2. If input_string contains characters in the range %x00-1f or %x7f %x7f-
ff (i.e., not in VCHAR or SP), fail serialization.

3. Let output be the string DQUOTE.

4. For each character char in input_string:

1. If char is "\" or DQUOTE:

1. Append "\" to output.

2. Append char to output.

5. Append DQUOTE to output.

6. Return output.

4.1.7. Serializing a Token

Given a Token as input_token, return an ASCII string suitable for use
in an HTTP field value.

1. Convert input_token into a sequence of ASCII characters; if
conversion fails, fail serialization.

2. If the first character of input_token is not ALPHA or "*", or the
remaining portion contains a character not in tchar, ":", or "/",
fail serialization.

3. Let output be an empty string.

4. Append input_token to output.

5. Return output.

4.1.8. Serializing a Byte Sequence

Given a Byte Sequence as input_bytes, return an ASCII string suitable
for use in an HTTP field value.

1. If input_bytes is not a sequence of bytes, fail serialization.

2. Let output be an empty string.

3. Append ":" to output.

4. Append the result of base64-encoding input_bytes as per
[RFC4648], Section 4, taking account of the requirements below.

5. Append ":" to output.

6. Return output.

The encoded data is required to be padded with "=", as per [RFC4648],
Section 3.2.

Likewise, encoded data SHOULD have pad bits set to zero, as per
[RFC4648], Section 3.5, unless it is not possible to do so due to
implementation constraints.

4.1.9. Serializing a Boolean

Given a Boolean as input_boolean, return an ASCII string suitable for
use in an HTTP field value.

1. If input_boolean is not a boolean, fail serialization.

2. Let output be an empty string.

3. Append "?" to output.

4. If input_boolean is true, append "1" to output.

5. If input_boolean is false, append "0" to output.

6. Return output.

4.2. Parsing Structured Fields

When a receiving implementation parses HTTP fields that are known to
be Structured Fields, it is important that care be taken, as there
are a number of edge cases that can cause interoperability or even
security problems. This section specifies the algorithm for doing
so.

Given an array of bytes as input_bytes that represents represent the chosen
field's field-value (which is empty if that field is not present) and
field_type (one of "dictionary", "list", or "item"), return the
parsed header value.

1. Convert input_bytes into an ASCII string input_string; if
conversion fails, fail parsing.

2. Discard any leading SP characters from input_string.

3. If field_type is "list", let output be the result of running
Parsing a List (Section 4.2.1) with input_string.

4. If field_type is "dictionary", let output be the result of
running Parsing a Dictionary (Section 4.2.2) with input_string.

5. If field_type is "item", let output be the result of running
Parsing an Item (Section 4.2.3) with input_string.

6. Discard any leading SP characters from input_string.

7. If input_string is not empty, fail parsing.

8. Otherwise, return output.

When generating input_bytes, parsers MUST combine all field lines in
the same section (header or trailer) that case-insensitively match
the field name into one comma-separated field-value, as per
[RFC7230], Section 3.2.2; this assures that the entire field value is
processed correctly.

For Lists and Dictionaries, this has the effect of correctly
concatenating all of the field's lines, as long as individual members
of the top-level data structure are not split across multiple header
instances. The parsing algorithms for both types allow tab
characters, since these might be used to combine field lines by some
implementations.

Strings split across multiple field lines will have unpredictable
results, because a comma(s) and whitespace inserted upon combination one or more commas (with optional whitespace) will
become part of the string output by the parser. Since concatenation
might be done by an upstream intermediary, the results are not under
the control of the serializer or the parser, even when they are both
under the control of the same party.

Tokens, Integers, Decimals, and Byte Sequences cannot be split across
multiple field lines because the inserted commas will cause parsing
to fail.

Parsers MAY fail when processing a field value spread across multiple
field lines, when one of those lines does not parse as that field.
For example, a parsing handling an Example-String field that's
defined as an sf-string is allowed to fail when processing this field
section:

Example-String: "foo
Example-String: bar"

If parsing fails -- including when calling another algorithm -- the
entire field value MUST be ignored (i.e., treated as if the field
were not present in the section). This is intentionally strict, to
improve interoperability and safety, and specifications referencing
this document are not allowed to loosen this requirement.

Note that this requirement does not apply to an implementation that
is not parsing the field; for example, an intermediary is not
required to strip a failing field from a message before forwarding
it.

4.2.1. Parsing a List

Given an ASCII string as input_string, return an array of
(item_or_inner_list, parameters) tuples. input_string is modified to
remove the parsed value.

1. Let members be an empty array.

2. While input_string is not empty:

1. Append the result of running Parsing an Item or Inner List
(Section 4.2.1.1) with input_string to members.

2. Discard any leading OWS characters from input_string.

3. If input_string is empty, return members.

4. Consume the first character of input_string; if it is not
",", fail parsing.

5. Discard any leading OWS characters from input_string.

6. If input_string is empty, there is a trailing comma; fail
parsing.

3. No structured data has been found; return members (which is
empty).

4.2.1.1. Parsing an Item or Inner List

Given an ASCII string as input_string, return the tuple
(item_or_inner_list, parameters), where item_or_inner_list can be
either a single bare item or an array of (bare_item, parameters)
tuples. input_string is modified to remove the parsed value.

1. If the first character of input_string is "(", return the result
of running Parsing an Inner List (Section 4.2.1.2) with
input_string.

2. Return the result of running Parsing an Item (Section 4.2.3) with
input_string.

4.2.1.2. Parsing an Inner List

Given an ASCII string as input_string, return the tuple (inner_list,
parameters), where inner_list is an array of (bare_item, parameters)
tuples. input_string is modified to remove the parsed value.

1. Consume the first character of input_string; if it is not "(",
fail parsing.

2. Let inner_list be an empty array.

3. While input_string is not empty:

1. Discard any leading SP characters from input_string.

2. If the first character of input_string is ")":

1. Consume the first character of input_string.

2. Let parameters be the result of running Parsing
Parameters (Section 4.2.3.2) with input_string.

3. Return the tuple (inner_list, parameters).

3. Let item be the result of running Parsing an Item
(Section 4.2.3) with input_string.

4. Append item to inner_list.

5. If the first character of input_string is not SP or ")", fail
parsing.

4. The end of the Inner List was not found; fail parsing.

4.2.2. Parsing a Dictionary

Given an ASCII string as input_string, return an ordered map whose
values are (item_or_inner_list, parameters) tuples. input_string is
modified to remove the parsed value.

1. Let dictionary be an empty, ordered map.

2. While input_string is not empty:

1. Let this_key be the result of running Parsing a Key
(Section 4.2.3.3) with input_string.

2. If the first character of input_string is "=":

1. Consume the first character of input_string.

2. Let member be the result of running Parsing an Item or
Inner List (Section 4.2.1.1) with input_string.

3. Otherwise:

1. Let value be Boolean true.

2. Let parameters be the result of running Parsing
Parameters (Section 4.2.3.2) with input_string.

3. Let member be the tuple (value, parameters).

4. Add name this_key with value member to dictionary. If dictionary already contains a name key this_key (comparing
character for character), overwrite its value. value with member.

5. Otherwise, append key this_key with value member to
dictionary.

6. Discard any leading OWS characters from input_string.

7. If input_string is empty, return dictionary.

8. Consume the first character of input_string; if it is not
",", fail parsing.

9. Discard any leading OWS characters from input_string.

10. If input_string is empty, there is a trailing comma; fail
parsing.

3. No structured data has been found; return dictionary (which is
empty).

Note that when duplicate Dictionary keys are encountered, it has the
effect of ignoring all but the
last instance. instance are ignored.

4.2.3. Parsing an Item

Given an ASCII string as input_string, return a (bare_item,
parameters) tuple. input_string is modified to remove the parsed
value.

1. Let bare_item be the result of running Parsing a Bare Item
(Section 4.2.3.1) with input_string.

2. Let parameters be the result of running Parsing Parameters
(Section 4.2.3.2) with input_string.

3. Return the tuple (bare_item, parameters).

4.2.3.1. Parsing a Bare Item

Given an ASCII string as input_string, return a bare Item.
input_string is modified to remove the parsed value.

1. If the first character of input_string is a "-" or a DIGIT,
return the result of running Parsing an Integer or Decimal
(Section 4.2.4) with input_string.

2. If the first character of input_string is a DQUOTE, return the
result of running Parsing a String (Section 4.2.5) with
input_string.

3. If the first character of input_string is ":", an ALPHA or "*", return
the result of running Parsing a Byte Sequence Token (Section 4.2.7) 4.2.6) with
input_string.

4. If the first character of input_string is "?", ":", return the result
of running Parsing a Boolean Byte Sequence (Section 4.2.8) 4.2.7) with
input_string.

5. If the first character of input_string is an ALPHA or "*", "?", return the result
of running Parsing a Token Boolean (Section 4.2.6) 4.2.8) with input_string.

6. Otherwise, the item type is unrecognized; fail parsing.

4.2.3.2. Parsing Parameters

Given an ASCII string as input_string, return an ordered map whose
values are bare Items. input_string is modified to remove the parsed
value.

1. Let parameters be an empty, ordered map.

2. While input_string is not empty:

1. If the first character of input_string is not ";", exit the
loop.

2. Consume a the ";" character from the beginning of input_string.

3. Discard any leading SP characters from input_string.

4. Let param_name param_key be the result of running Parsing a Key
(Section 4.2.3.3) with input_string.

5. Let param_value be Boolean true.

6. If the first character of input_string is "=":

1. Consume the "=" character at the beginning of
input_string.

2. Let param_value be the result of running Parsing a Bare
Item (Section 4.2.3.1) with input_string.

7. Append key param_name with value param_value to parameters. If parameters already contains a name param_name key param_key (comparing
character for character), overwrite its value. value with
param_value.

8. Otherwise, append key param_key with value param_value to
parameters.

3. Return parameters.

Note that when duplicate Parameter parameter keys are encountered, it has the
effect of ignoring all but the
last instance. instance are ignored.

4.2.3.3. Parsing a Key

Given an ASCII string as input_string, return a key. input_string is
modified to remove the parsed value.

1. If the first character of input_string is not lcalpha or "*",
fail parsing.

2. Let output_string be an empty string.

3. While input_string is not empty:

1. If the first character of input_string is not one of lcalpha,
DIGIT, "_", "-", ".", or "*", return output_string.

2. Let char be the result of consuming the first character of
input_string.

3. Append char to output_string.

4. Return output_string.

4.2.4. Parsing an Integer or Decimal

Given an ASCII string as input_string, return an Integer or Decimal.
input_string is modified to remove the parsed value.

NOTE: This algorithm parses both Integers (Section 3.3.1) and
Decimals (Section 3.3.2) 3.3.2), and returns the corresponding structure.

1. Let type be "integer".

2. Let sign be 1.

3. Let input_number be an empty string.

4. If the first character of input_string is "-", consume it and
set sign to -1.

5. If input_string is empty, there is an empty integer; fail
parsing.

6. If the first character of input_string is not a DIGIT, fail
parsing.

7. While input_string is not empty:

1. Let char be the result of consuming the first character of
input_string.

2. If char is a DIGIT, append it to input_number.

3. Else, if type is "integer" and char is ".":

1. If input_number contains more than 12 characters, fail
parsing.

2. Otherwise, append char to input_number and set type to
"decimal".

4. Otherwise, prepend char to input_string, and exit the loop.

5. If type is "integer" and input_number contains more than 15
characters, fail parsing.

6. If type is "decimal" and input_number contains more than 16
characters, fail parsing.

8. If type is "integer":

1. Parse input_number as an integer and let output_number be
the product of the result and sign.

2. If output_number is outside the range -999,999,999,999,999
to 999,999,999,999,999 inclusive, fail parsing.

9. Otherwise:

1. If the final character of input_number is ".", fail parsing.

2. If the number of characters after "." in input_number is
greater than three, fail parsing.

3. Parse input_number as a decimal number and let output_number
be the product of the result and sign.

10. Return output_number.

4.2.5. Parsing a String

Given an ASCII string as input_string, return an unquoted String.
input_string is modified to remove the parsed value.

1. Let output_string be an empty string.

2. If the first character of input_string is not DQUOTE, fail
parsing.

3. Discard the first character of input_string.

4. While input_string is not empty:

1. Let char be the result of consuming the first character of
input_string.

2. If char is a backslash ("\"):

1. If input_string is now empty, fail parsing.

2. Let next_char be the result of consuming the first
character of input_string.

3. If next_char is not DQUOTE or "\", fail parsing.

4. Append next_char to output_string.

3. Else, if char is DQUOTE, return output_string.

4. Else, if char is in the range %x00-1f or %x7f %x7f-ff (i.e., it's it is
not in VCHAR or SP), fail parsing.

5. Else, append char to output_string.

5. Reached the end of input_string without finding a closing DQUOTE;
fail parsing.

4.2.6. Parsing a Token

Given an ASCII string as input_string, return a Token. input_string
is modified to remove the parsed value.

1. If the first character of input_string is not ALPHA or "*", fail
parsing.

2. Let output_string be an empty string.

3. While input_string is not empty:

1. If the first character of input_string is not in tchar, ":",
or "/", return output_string.

2. Let char be the result of consuming the first character of
input_string.

3. Append char to output_string.

4. Return output_string.

4.2.7. Parsing a Byte Sequence

Given an ASCII string as input_string, return a Byte Sequence.
input_string is modified to remove the parsed value.

1. If the first character of input_string is not ":", fail parsing.

2. Discard the first character of input_string.

3. If there is not a ":" character before the end of input_string,
fail parsing.

4. Let b64_content be the result of consuming content of
input_string up to but not including the first instance of the
character ":".

5. Consume the ":" character at the beginning of input_string.

6. If b64_content contains a character not included in ALPHA, DIGIT,
"+", "/", and "=", fail parsing.

7. Let binary_content be the result of base64-decoding [RFC4648]
b64_content, synthesizing padding if necessary (note the
requirements about recipient behavior below). If base64 decoding
fails, parsing fails.

8. Return binary_content.

Because some implementations of base64 do not allow rejection of
encoded data that is not properly "=" padded (see [RFC4648],
Section 3.2), parsers SHOULD NOT fail when "=" padding is not
present, unless they cannot be configured to do so.

Because some implementations of base64 do not allow rejection of
encoded data that has non-zero pad bits (see [RFC4648], Section 3.5),
parsers SHOULD NOT fail when non-zero pad bits are present, unless
they cannot be configured to do so.

This specification does not relax the requirements in [RFC4648],
Sections 3.1 and 3.3; therefore, parsers MUST fail on characters
outside the base64 alphabet and on line feeds in encoded data.

4.2.8. Parsing a Boolean

Given an ASCII string as input_string, return a Boolean. input_string
is modified to remove the parsed value.

1. If the first character of input_string is not "?", fail parsing.

2. Discard the first character of input_string.

3. If the first character of input_string matches "1", discard the
first character, and return true.

4. If the first character of input_string matches "0", discard the
first character, and return false.

5. If no No value has matched; fail parsing.

5. IANA Considerations

This document has no IANA actions.

6. Security Considerations

The size of most types defined by Structured Fields is not limited;
as a result, extremely large fields could be an attack vector (e.g.,
for resource consumption). Most HTTP implementations limit the sizes
of individual fields as well as the overall header or trailer section
size to mitigate such attacks.

It is possible for parties with the ability to inject new HTTP fields
to change the meaning of a Structured Field. In some circumstances,
this will cause parsing to fail, but it is not possible to reliably
fail in all such circumstances.

7. References

7.1. Normative References

[RFC0020] Cerf, V., "ASCII format for network interchange", STD 80,
RFC 20, DOI 10.17487/RFC0020, October 1969,
<https://www.rfc-editor.org/info/rfc20>.

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.

[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
<https://www.rfc-editor.org/info/rfc4648>.

[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.

[RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Message Syntax and Routing",
RFC 7230, DOI 10.17487/RFC7230, June 2014,
<https://www.rfc-editor.org/info/rfc7230>.

[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.

7.2. Informative References

[IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic",
DOI 10.1109/IEEESTD.2019.8766229, IEEE 754-2019, July
2019, <https://ieeexplore.ieee.org/document/8766229>.

[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/info/rfc3986>.

[RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
DOI 10.17487/RFC7231, June 2014,
<https://www.rfc-editor.org/info/rfc7231>.

[RFC7493] Bray, T., Ed., "The I-JSON Message Format", RFC 7493,
DOI 10.17487/RFC7493, March 2015,
<https://www.rfc-editor.org/info/rfc7493>.

[RFC7540] Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext
Transfer Protocol Version 2 (HTTP/2)", RFC 7540,
DOI 10.17487/RFC7540, May 2015,
<https://www.rfc-editor.org/info/rfc7540>.

[RFC7541] Peon, R. and H. Ruellan, "HPACK: Header Compression for
HTTP/2", RFC 7541, DOI 10.17487/RFC7541, May 2015,
<https://www.rfc-editor.org/info/rfc7541>.

[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.

[UTF-8]

[STD63] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November 2003, <https://www.rfc-editor.org/info/rfc3629>.
<https://www.rfc-editor.org/info/std63>.

Appendix A. Frequently Asked Questions

A.1. Why Not JSON?

Earlier proposals for Structured Fields were based upon JSON
[RFC8259]. However, constraining its use to make it suitable for
HTTP header fields required senders and recipients to implement
specific additional handling.

For example, JSON has specification issues around large numbers and
objects with duplicate members. Although advice for avoiding these
issues is available (e.g., [RFC7493]), it cannot be relied upon.

Likewise, JSON strings are by default Unicode strings, which have a
number of potential interoperability issues (e.g., in comparison).
Although implementers can be advised to avoid non-ASCII content where
unnecessary, this is difficult to enforce.

Another example is JSON's ability to nest content to arbitrary
depths. Since the resulting memory commitment might be unsuitable
(e.g., in embedded and other limited server deployments), it's
necessary to limit it in some fashion; however, existing JSON
implementations have no such limits, and even if a limit is
specified, it's likely that some field definition will find a need to
violate it.

Because of JSON's broad adoption and implementation, it is difficult
to impose such additional constraints across all implementations;
some deployments would fail to enforce them, thereby harming
interoperability. In short, if it looks like JSON, people will be
tempted to use a JSON parser/serializer on field values.

Since a major goal for Structured Fields is to improve
interoperability and simplify implementation, these concerns led to a
format that requires a dedicated parser and serializer.

Additionally, there were widely shared feelings that JSON doesn't
"look right" in HTTP fields.

Appendix B. Implementation Notes

A generic implementation of this specification should expose the top-
level serialize (Section 4.1) and parse (Section 4.2) functions.
They need not be functions; for example, it could be implemented as
an object, with methods for each of the different top-level types.

For interoperability, it's important that generic implementations be
complete and follow the algorithms closely; see Section 1.1. To aid
this, a common test suite is being maintained by the community at
<https://github.com/httpwg/structured-field-tests>.

Implementers should note that Dictionaries and Parameters are order-
preserving maps. Some fields may not convey meaning in the ordering
of these data types, but it should still be exposed so that it will
be available to applications that need to use it.

Likewise, implementations should note that it's important to preserve
the distinction between Tokens and Strings. While most programming
languages have native types that map to the other types well, it may
be necessary to create a wrapper "token" object or use a parameter on
functions to assure that these types remain separate.

The serialization algorithm is defined in a way that it is not
strictly limited to the data types defined in Section 3 in every
case. For example, Decimals are designed to take broader input and
round to allowed values.

Implementations are allowed to limit the allowed size of different
structures, subject to the minimums defined for each type. When a
structure exceeds an implementation limit, that structure fails
parsing or serialization.

Acknowledgements

Many thanks to Matthew Kerwin for his detailed feedback and careful
consideration during the development of this specification.

Thanks also to Ian Clelland, Roy Fielding, Anne van Kesteren, Kazuho
Oku, Evert Pot, Julian Reschke, Martin Thomson, Mike West, and
Jeffrey Yasskin for their contributions.

Authors' Addresses

Mark Nottingham
Fastly
Prahran VIC
Australia

Email: mnot@mnot.net
URI: https://www.mnot.net/

Poul-Henning Kamp
The Varnish Cache Project

Email: phk@varnish-cache.org