wdiff rfc8942v3.txt rfc8942.txt

Internet Engineering Task Force (IETF) I. Grigorik
Request for Comments: 8942 Y. Weiss
Category: Experimental Google
ISSN: 2070-1721 October 2020 January 2021

HTTP Client Hints

Abstract

HTTP defines proactive content negotiation to allow servers to select
the appropriate response for a given request, based upon the user
agent's characteristics, as expressed in request headers. In
practice, user agents are often unwilling to send those request
headers, because it is not clear whether they will be used, and
sending them impacts both performance and privacy.

This document defines an Accept-CH response header that servers can
use to advertise their use of request headers for proactive content
negotiation, along with a set of guidelines for the creation of such
headers, colloquially known as "Client Hints."

Status of This Memo

This document is not an Internet Standards Track specification; it is
published for examination, experimental implementation, and
evaluation.

This document defines an Experimental Protocol for the Internet
community. This document is a product of the Internet Engineering
Task Force (IETF). It represents the consensus of the IETF
community. It has received public review and has been approved for
publication by the Internet Engineering Steering Group (IESG). Not
all documents approved by the IESG are candidates for any level of
Internet Standard; see Section 2 of RFC 7841.

Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8942.

This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.

Table of Contents

1. Introduction
1.1. Notational Conventions
2. Client Hints Request Header Fields
2.1. Sending Client Hints
2.2. Server Processing of Client Hints
3. Advertising Server Support
3.1. The Accept-CH Response Header Field
3.2. Interaction with Caches
4. Security Considerations
4.1. Information Exposure
4.2. Deployment and Security Risks
4.3. Abuse Detection
5. Cost of Sending Hints
6. IANA Considerations
6.1. Accept-CH
7. References
7.1. Normative References
7.2. Informative References
Acknowledgements
Authors' Addresses

1. Introduction

There are thousands of different devices accessing the web, each with
different device capabilities and preference information. These
device capabilities include hardware and software characteristics, as
well as dynamic user and user-agent user agent preferences. Historically,
applications that wanted the server to optimize content delivery and
user experience based on such capabilities had to rely on passive
identification (e.g., by matching the User-Agent header field
(Section 5.5.3 of [RFC7231]) against an established database of user- user
agent signatures), use HTTP cookies [RFC6265] and URL parameters, or
use some combination of these and similar mechanisms to enable ad hoc
content negotiation.

Such techniques are expensive to set up and maintain and are not
portable across both applications and servers. They also make it
hard for both user agent and server to understand which data are
required and are in use during the negotiation:

* User-agent User agent detection cannot reliably identify all static
variables, cannot infer dynamic user-agent user agent preferences, requires
an external device database, is not cache friendly, and is reliant
on a passive fingerprinting surface.
* Cookie-based approaches are not portable across applications and
servers, impose additional client-side latency by requiring
JavaScript execution, and are not cache friendly.
* URL parameters, similar to cookie-based approaches, suffer from
lack of portability and are hard to deploy due to a requirement to
encode content negotiation data inside of the URL of each
resource.

Proactive content negotiation (Section 3.4.1 of [RFC7231]) offers an
alternative approach; user agents use specified, well-defined request
headers to advertise their capabilities and characteristics, so that
servers can select (or formulate) an appropriate response based on
those request headers (or on other, implicit characteristics).

However, traditional proactive content negotiation techniques often
mean that user agents send these request headers prolifically. This
causes performance concerns (because it creates "bloat" in requests),
as well as privacy issues; passively providing such information
allows servers to silently fingerprint the user.

This document defines Client Hints, a framework that enables servers
to opt-in to specific proactive content negotiation features,
adapting their content accordingly, as well as guidelines for content
negotiation mechanisms that use the framework. This document also
defines a new response header, Accept-CH, that allows an origin
server to explicitly ask that user agents send these headers in
requests.

Client Hints mitigate performance concerns by assuring that user
agents will only send the request headers when they're actually going
to be used, and they mitigate privacy concerns of passive
fingerprinting by requiring explicit opt-in and disclosure of
required headers by the server through the use of the Accept-CH
response header, turning passive fingerprinting vectors into active
ones.

The document does not define specific usages of Client Hints. Such
usages need to be defined in their respective specifications.

One example of such usage is the User-Agent Client Hints [UA-CH].

1.1. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.

This document uses the Augmented Backus-Naur Form (ABNF) notation of
[RFC5234].

2. Client Hints Request Header Fields

A Client Hints request header field is an HTTP header field that is
used by HTTP user agents to indicate data that can be used by the
server to select an appropriate response. Each one conveys user-
agent preferences that the server can use to adapt and optimize the
response.

2.1. Sending Client Hints

User agents choose what Client Hints to send in a request based on
their default settings, user configuration, and server preferences
expressed in "Accept-CH". The user agent and server can use an opt-
in mechanism outlined below to negotiate which header fields need to
be sent to allow for efficient content adaption, and they can
optionally use additional mechanisms (e.g., as outlined in
[CLIENT-HINTS-INFRASTRUCTURE]) to negotiate delegation policies that
control access of third parties to those same header fields. User
agents SHOULD require an opt-in to send any hints that are not
considered low-entropy. See the low-entropy hint table at
[CLIENT-HINTS-INFRASTRUCTURE] for examples of ones hints that are. expose low
amounts of entropy.

Implementers need to be aware of the fingerprinting implications when
implementing support for Client Hints and follow the considerations
outlined in the Security Considerations section of this document (see
Section 4).

2.2. Server Processing of Client Hints

When presented with a request that contains one or more Client Hints
header fields, servers can optimize the response based upon the
information in them. When doing so, and if the resource is
cacheable, the server MUST also generate a Vary response header field
(Section 7.1.4 of [RFC7231]) to indicate which hints can affect the
selected response and whether the selected response is appropriate
for a later request.

Servers MUST ignore hints they do not understand nor support. There
is no mechanism for servers to indicate to user agents that hints
were ignored.

Furthermore, the server can generate additional response header
fields (as specified by the hint or hints in use) that convey related
values to aid client processing.

3. Advertising Server Support

Servers can advertise support for Client Hints using the mechanism
described below.

3.1. The Accept-CH Response Header Field

The Accept-CH response header field indicates server support for the
hints indicated in its value. Servers wishing to receive user-agent user agent
information through Client Hints SHOULD add the Accept-CH response
header to their responses as early as possible.

Accept-CH is a Structured Header [RFC8941]. Its value MUST be an sf-
list (Section 3.1 of [RFC8941]) whose members are Tokens
(Section 3.3.4 of [RFC8941]). Its ABNF is:

Accept-CH = sf-list

For example:

Accept-CH: Sec-CH-Example, Sec-CH-Example-2

When a user agent receives an HTTP response containing "Accept-CH",
it indicates that the origin opts-in to receive the indicated request
header fields for subsequent same-origin requests. The opt-in MUST
be ignored if delivered over non-secure transport (using a scheme
different from HTTPS). It SHOULD be persisted and bound to the
origin to enable delivery of Client Hints on subsequent requests to
the server's origin, for the duration of the user's session (as
defined by the user agent). An opt-in overrides previous persisted
opt-in values and SHOULD be persisted in its stead.

Based on the Accept-CH example above, which is received in response
to a user agent navigating to "https://site.example", and delivered
over a secure transport, persisted Accept-CH preferences will be
bound to "https://site.example". It will then use it for navigations
to for example, "https://site.example/foobar.html", but not to, for
example, "https://foobar.site.example/". It will similarly use the
preference for any same-origin resource requests (e.g., to
"https://site.example/image.jpg") initiated by the page constructed
from the navigation's response, but not to cross-origin resource
requests (e.g., "https://thirdparty.example/resource.js"). This
preference will not extend to resource requests initiated to
"https://site.example" from other origins (e.g., from navigations to
"https://other.example/").

3.2. Interaction with Caches

When selecting a response based on one or more Client Hints, and if
the resource is cacheable, the server needs to generate a Vary
response header field [RFC7234] to indicate which hints can affect
the selected response and whether the selected response is
appropriate for a later request.

Vary: Sec-CH-Example

The above example indicates that the cache key needs to include the
Sec-CH-Example header field.

Vary: Sec-CH-Example, Sec-CH-Example-2

The above example indicates that the cache key needs to include the
Sec-CH-Example and Sec-CH-Example-2 header fields.

4. Security Considerations

4.1. Information Exposure

Request header fields used in features relying on this document
expose information about the user's environment to enable privacy-
preserving proactive content negotiation and avoid exposing passive
fingerprinting vectors. However, implementers need to bear in mind
that in the worst case, uncontrolled and unmonitored active
fingerprinting is not better than passive fingerprinting. In order
to provide user privacy benefits, user agents need to apply further
policies that prevent abuse of the information exposed by features
using Client Hints.

The information exposed by features might reveal new information
about the user, and implementers ought to consider the following
considerations, recommendations, and best practices.

The underlying assumption is that exposing information about the user
as a request header is equivalent (from a security perspective) to
exposing this information by other means. (For example, if the
request's origin can access that information using JavaScript APIs
and transmit it to its servers.)

Because Client Hints is an explicit opt-in mechanism, it means that
servers wanting access to information about the user's environment
need to actively ask for it, enabling clients and privacy researchers
to keep track of which origins collect that data, and potentially act
upon it. The header-based opt-in means that removal of passive
fingerprinting vectors is possible. As an example, the user agent
can reduce the information exposed by the User-Agent string, while
enabling active access to that information through User-Agent Client
Hints [UA-CH]. Otherwise, the user agent can expose information
already available through script (e.g., the Save-Data Client Hints
<https://wicg.github.io/savedata/#save-data-request-header-field>),
without increasing the passive fingerprinting surface. User agents
supporting Client Hints features which send certain information to
opted-in servers SHOULD avoid sending the equivalent information
passively.

Therefore, features relying on this document to define Client Hint
headers MUST NOT provide new information that is otherwise not made
available to the application by the user agent, such as existing
request headers, HTML, CSS, or JavaScript.

Such features need to take into account the following aspects of the
exposed information:

Entropy: Exposing highly granular data can be used to help identify
users across multiple requests to different origins. Reducing the
set of header field values that can be expressed, or restricting
them to an enumerated range where the advertised value is close to
but is not an exact representation of the current value, can
improve privacy and reduce risk of linkability by ensuring that
the same value is sent by multiple users.

Sensitivity: The feature SHOULD NOT expose user-sensitive
information. To that end, information available to the
application, but gated behind specific user actions (e.g., a
permission prompt or user activation), SHOULD NOT be exposed as a
Client Hint.

Change over time: The feature SHOULD NOT expose user information
that changes over time, unless the state change itself is also
exposed (e.g., through JavaScript callbacks).

Different features will be positioned in different points in the
space between low-entropy, non-sensitive, and static information
(e.g., user-agent user agent information) and high-entropy, sensitive, and
dynamic information (e.g., geolocation). User agents need to
consider the value provided by a particular feature vs. these
considerations and may wish to have different policies regarding that
tradeoff on a per-feature or other fine-grained basis.

Implementers ought to consider both user- and server-controlled
mechanisms and policies to control which Client Hints header fields
are advertised:

* Implementers SHOULD restrict delivery of some or all Client Hints
header fields to the opt-in origin only, unless the opt-in origin
has explicitly delegated permission to another origin to request
Client Hints header fields.

* Implementers that consider providing user-choice mechanisms that
allow users to balance privacy concerns against bandwidth
limitations need to also consider that explaining the privacy
implications involved to users, such as the risks of passive
fingerprinting, may be challenging or even impractical.

* Implementations specific to certain use cases or threat models MAY
avoid transmitting some or all of the Client Hints header fields.
For example, avoid transmission of header fields that can carry
higher risks of linkability.

User agents MUST clear persisted opt-in preferences when any one of
site data, browsing cache, cookies, or similar are cleared.

4.2. Deployment and Security Risks

Deployment of new request headers requires several considerations:

* Potential conflicts due to existing use of a header field name
* Properties of the data communicated in a header field value

Authors of new Client Hints are advised to carefully consider whether
they need to be able to be added by client-side content (e.g.,
scripts) or whether the Client Hints need to be exclusively set by
the user agent. In the latter case, the Sec- prefix on the header
field name has the effect of preventing scripts and other application
content from setting them in user agents. Using the "Sec-" prefix
signals to servers that the user agent -- and not application content
-- generated the values. See [FETCH] for more information.

By convention, request headers that are Client Hints are encouraged
to use a CH- prefix, to make them easier to identify as using this
framework; for example, CH-Foo or, with a "Sec-" prefix, Sec-CH-Foo.
Doing so makes them easier to identify programmatically (e.g., for
stripping unrecognized hints from requests by privacy filters).

A Client Hints request header negotiated using the Accept-CH opt-in
mechanism MUST have a field name that matches sf-token (Section 3.3.4
of [RFC8941]).

4.3. Abuse Detection

A user agent that tracks access to active fingerprinting information
SHOULD consider emission of Client Hints headers similar to the way
it would consider access to the equivalent API.

Research into abuse of Client Hints might look at how HTTP responses
to requests that contain Client Hints differ from those with
different values and from those without values. This might be used
to reveal which Client Hints are in use, allowing researchers to
further analyze that use.

5. Cost of Sending Hints

Sending Client Hints to the server incurs an increase in request byte
size. Some of this increase can be mitigated by HTTP header
compression schemes, but each new hint sent will still lead to some
increased bandwidth usage. Servers SHOULD take that into account
when opting in to receive Client Hints and SHOULD NOT opt-in to
receive hints unless they are to be used for content adaptation
purposes.

Due to request byte size increase, features relying on this document
to define Client Hints MAY consider restricting sending those hints
to certain request destinations [FETCH], where they are more likely
to be useful.

6. IANA Considerations

Features relying on this document are expected to register added
request header fields in the "Permanent Message Header Field Names"
registry [RFC3864].

This document defines the "Accept-CH" HTTP response header field;
IANA has registered it in the same registry.

6.1. Accept-CH

Header field name: Accept-CH

Applicable protocol: HTTP

Status: experimental

Author/Change controller: IETF

Specification document(s): Section 3.1 of this RFC

Related information: for Client Hints

7. References

7.1. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.

[RFC3864] Klyne, G., Nottingham, M., and J. Mogul, "Registration
Procedures for Message Header Fields", BCP 90, RFC 3864,
DOI 10.17487/RFC3864, September 2004,
<https://www.rfc-editor.org/info/rfc3864>.

[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.

[RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
DOI 10.17487/RFC7231, June 2014,
<https://www.rfc-editor.org/info/rfc7231>.

[RFC7234] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
Ed., "Hypertext Transfer Protocol (HTTP/1.1): Caching",
RFC 7234, DOI 10.17487/RFC7234, June 2014,
<https://www.rfc-editor.org/info/rfc7234>.

[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.

[RFC8941] Nottingham, M. and P-H. Kamp, "Structured Field Values for
HTTP", RFC 8941, DOI 10.17487/RFC8941, October 2020, January 2021,
<https://www.rfc-editor.org/info/rfc8941>.

7.2. Informative References

[CLIENT-HINTS-INFRASTRUCTURE]
Weiss, Y., "Client Hints Infrastructure", July 2020,
<https://wicg.github.io/client-hints-infrastructure/>.

[FETCH] WHATWG, "Fetch - Living Standard", Living Standard,
September 2020, <https://fetch.spec.whatwg.org/>.

[RFC6265] Barth, A., "HTTP State Management Mechanism", RFC 6265,
DOI 10.17487/RFC6265, April 2011,
<https://www.rfc-editor.org/info/rfc6265>.

[UA-CH] West, M. and Y. Weiss, "User-Agent Client Hints", August
2020, <https://wicg.github.io/ua-client-hints/>.

Acknowledgements

Thanks to Mark Nottingham, Julian Reschke, Chris Bentzel, Ben
Greenstein, Tarun Bansal, Roy Fielding, Vasiliy Faronov, Ted Hardie,
Jonas Sicking, Martin Thomson, and numerous other members of the IETF
HTTP Working Group for invaluable help and feedback.

Authors' Addresses

Ilya Grigorik
Google

Email: ilya@igvita.com
URI: https://www.igvita.com/

Yoav Weiss
Google

Email: yoav@yoav.ws
URI: https://blog.yoav.ws/