Internet Engineering Task Force (IETF) M.Koster, Ed.Koster Request for Comments: 9309 Category: Standards Track G.Illyes, Ed.Illyes ISSN: 2070-1721 H.Zeller, Ed.Zeller L.Sassman, Ed.Sassman Google LLC September 2022 Robots Exclusion Protocol Abstract This document specifies and extends the "Robots Exclusion Protocol" method originally defined by Martijn Koster in 1994 for service owners to control how content served by their services may be accessed, if at all, by automatic clients known as crawlers. Specifically, it adds definition language for the protocol, instructions for handling errors, and instructions for caching. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9309. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction 1.1. Requirements Language 2. Specification 2.1. Protocol Definition 2.2. Formal Syntax 2.2.1. The User-Agent Line 2.2.2. The "Allow" and "Disallow" Lines 2.2.3. Special Characters 2.2.4. Other Records 2.3. Access Method 2.3.1. Access Results 2.3.1.1. Successful Access 2.3.1.2. Redirects 2.3.1.3. "Unavailable" Status 2.3.1.4. "Unreachable" Status 2.3.1.5. Parsing Errors 2.4. Caching 2.5. Limits 3. Security Considerations 4. IANA Considerations 5. Examples 5.1. Simple Example 5.2. Longest Match 6. References 6.1. Normative References 6.2. Informative References Authors' Addresses 1. Introduction This document applies to services that provide resources that clients can access through URIs as defined in [RFC3986]. For example, in the context of HTTP, a browser is a client that displays the content of a web page. Crawlers are automated clients. Search engines, for instance, have crawlers to recursively traverse links for indexing as defined in [RFC8288]. It may be inconvenient for service owners if crawlers visit the entirety of their URI space. This document specifies the rules originally defined by the "Robots Exclusion Protocol" [ROBOTSTXT] that crawlers are requested to honor when accessing URIs. These rules are not a form of access authorization. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. Specification 2.1. Protocol Definition The protocol language consists of rule(s) and group(s) that the service makes available in a file named "robots.txt" as described in Section 2.3: Rule: A line with a key-value pair that defines how a crawler may access URIs. See Section 2.2.2. Group: One or more user-agent lines that are followed by one or more rules. The group is terminated by a user-agent line or end of file. See Section 2.2.1. The last group may have no rules, which means it implicitly allows everything. 2.2. Formal Syntax Below is an Augmented Backus-Naur Form (ABNF) description, as described in [RFC5234]. robotstxt = *(group / emptyline) group = startgroupline ; We start with a user-agent ; line *(startgroupline / emptyline) ; ... and possibly more ; user-agent lines *(rule / emptyline) ; followed by rules relevant ; for the preceding ; user-agent lines startgroupline = *WS "user-agent" *WS ":" *WS product-token EOL rule = *WS ("allow" / "disallow") *WS ":" *WS (path-pattern / empty-pattern) EOL ; parser implementors: define additional lines you need (for ; example, Sitemaps). product-token = identifier / "*" path-pattern = "/" *UTF8-char-noctl ; valid URI path pattern empty-pattern = *WS identifier = 1*(%x2D / %x41-5A / %x5F / %x61-7A) comment = "#" *(UTF8-char-noctl / WS / "#") emptyline = EOL EOL = *WS [comment] NL ; end-of-line may have ; optional trailing comment NL = %x0D / %x0A / %x0D.0A WS = %x20 / %x09 ; UTF8 derived from RFC 3629, but excluding control characters UTF8-char-noctl = UTF8-1-noctl / UTF8-2 / UTF8-3 / UTF8-4 UTF8-1-noctl = %x21 / %x22 / %x24-7F ; excluding control, space, "#" UTF8-2 = %xC2-DF UTF8-tail UTF8-3 = %xE0 %xA0-BF UTF8-tail / %xE1-EC 2UTF8-tail / %xED %x80-9F UTF8-tail / %xEE-EF 2UTF8-tail UTF8-4 = %xF0 %x90-BF 2UTF8-tail / %xF1-F3 3UTF8-tail / %xF4 %x80-8F 2UTF8-tail UTF8-tail = %x80-BF 2.2.1. The User-Agent Line Crawlers set their own name, which is called a product token, to find relevant groups. The product token MUST contain only uppercase and lowercase letters ("a-z" and "A-Z"), underscores ("_"), and hyphens ("-"). The product token SHOULD be a substring of the identification string that the crawler sends to the service. For example, in the case of HTTP [RFC9110], the product token SHOULD be a substring in the User-Agent header. The identification string SHOULD describe the purpose of the crawler. Here's an example of a User-Agent HTTP request header with a link pointing to a page describing the purpose of the ExampleBot crawler, which appears as a substring in the User- Agent HTTP header and as a product token in the robots.txt user-agent line: +==========================================+========================+ | User-Agent HTTP header | robots.txt user-agent | | | line | +==========================================+========================+ | User-Agent: Mozilla/5.0 (compatible; | user-agent: ExampleBot | | ExampleBot/0.1; | | | https://www.example.com/bot.html) | | +------------------------------------------+------------------------+ Figure 1: Example of a User-Agent HTTP header and robots.txt user-agent line for the ExampleBot product token Note that the product token (ExampleBot) is a substring of the User- Agent HTTP header. Crawlers MUST use case-insensitive matching to find the group that matches the product token and then obey the rules of the group. If there is more than one group matching the user-agent, the matching groups' rules MUST be combined into one group and parsed according to Section 2.2.2. +========================================+========================+ | Two groups that match the same product | Merged group | | token exactly | | +========================================+========================+ | user-agent: ExampleBot | user-agent: ExampleBot | | disallow: /foo | disallow: /foo | | disallow: /bar | disallow: /bar | | | disallow: /baz | | user-agent: ExampleBot | | | disallow: /baz | | +----------------------------------------+------------------------+ Figure 2: Example of how to merge two robots.txt groups that match the same product token If no matching group exists, crawlers MUST obey the group with a user-agent line with the "*" value, if present. +==================================+======================+ | Two groups that don't explicitly | Applicable group for | | match ExampleBot | ExampleBot | +==================================+======================+ | user-agent: * | user-agent: * | | disallow: /foo | disallow: /foo | | disallow: /bar | disallow: /bar | | | | | user-agent: BazBot | | | disallow: /baz | | +----------------------------------+----------------------+ Figure 3: Example of no matching groups other than the "*" for the ExampleBot product token If no group matches the product token and there is no group with a user-agent line with the "*" value, or no groups are present at all, no rules apply. 2.2.2. The "Allow" and "Disallow" Lines These lines indicate whether accessing a URI that matches the corresponding path is allowed or disallowed. To evaluate if access to a URI is allowed, a crawler MUST match the paths in "allow" and "disallow" rules against the URI. The matching SHOULD be case sensitive. The matching MUST start with the first octet of the path. The most specific match found MUST be used. The most specific match is the match that has the most octets. Duplicate rules in a group MAY be deduplicated. If an "allow" rule and a "disallow" rule are equivalent, then the "allow" rule SHOULD be used. If no match is found amongst the rules in a group for a matching user-agent or there are no rules in the group, the URI is allowed. The /robots.txt URI is implicitly allowed. Octets in the URI and robots.txt paths outside the range of the ASCII coded character set, and those in the reserved range defined by [RFC3986], MUST be percent-encoded as defined by [RFC3986] prior to comparison. If a percent-encoded ASCII octet is encountered in the URI, it MUST be unencoded prior to comparison, unless it is a reserved character in the URI as defined by [RFC3986] or the character is outside the unreserved character range. The match evaluates positively if and only if the end of the path from the rule is reached before a difference in octets is encountered. For example: +==================+=======================+=======================+ | Path | Encoded Path | Path to Match | +==================+=======================+=======================+ | /foo/bar?baz=quz | /foo/bar?baz=quz | /foo/bar?baz=quz | +------------------+-----------------------+-----------------------+ | /foo/bar?baz= | /foo/bar?baz= | /foo/bar?baz= | | https://foo.bar | https%3A%2F%2Ffoo.bar | https%3A%2F%2Ffoo.bar | +------------------+-----------------------+-----------------------+ | /foo/bar/ | /foo/bar/%E3%83%84 | /foo/bar/%E3%83%84 | | U+E38384 | | | +------------------+-----------------------+-----------------------+ | /foo/ | /foo/bar/%E3%83%84 | /foo/bar/%E3%83%84 | | bar/%E3%83%84 | | | +------------------+-----------------------+-----------------------+ | /foo/ | /foo/bar/%62%61%7A | /foo/bar/baz | | bar/%62%61%7A | | | +------------------+-----------------------+-----------------------+ Figure 4: Examples of matching percent-encoded URI components The crawler SHOULD ignore "disallow" and "allow" rules that are not in any group (for example, any rule that precedes the first user- agent line). Implementors MAY bridge encoding mismatches if they detect that the robots.txt file is not UTF-8 encoded. 2.2.3. Special Characters Crawlers MUST support the following special characters: +===========+===================+==============================+ | Character | Description | Example | +===========+===================+==============================+ | # | Designates a line | allow: / # comment in line | | | comment. | | | | | # comment on its own line | +-----------+-------------------+------------------------------+ | $ | Designates the | allow: /this/path/exactly$ | | | end of the match | | | | pattern. | | +-----------+-------------------+------------------------------+ | * | Designates 0 or | allow: /this/*/exactly | | | more instances of | | | | any character. | | +-----------+-------------------+------------------------------+ Figure 5: List of special characters in robots.txt files If crawlers match special characters verbatim in the URI, crawlers SHOULD use "%" encoding. For example: +============================+====================================+ | Percent-encoded Pattern | URI | +============================+====================================+ | /path/file-with-a-%2A.html | https://www.example.com/path/ | | | file-with-a-*.html | +----------------------------+------------------------------------+ | /path/foo-%24 | https://www.example.com/path/foo-$ | +----------------------------+------------------------------------+ Figure 6: Example of percent-encoding 2.2.4. Other Records Crawlers MAY interpret other records that are not part of the robots.txt protocol -- for example, "Sitemaps" [SITEMAPS]. Crawlers MAY be lenient when interpreting other records. For example, crawlers may accept common misspellings of the record. Parsing of other records MUST NOT interfere with the parsing of explicitly defined records in Section 2. For example, a "Sitemaps" record MUST NOT terminate a group. 2.3. Access Method The rules MUST be accessible in a file named "/robots.txt" (all lowercase) in the top-level path of the service. The file MUST be UTF-8 encoded (as defined in [RFC3629]) and Internet Media Type "text/plain" (as defined in [RFC2046]). As per [RFC3986], the URI of the robots.txt file is: "scheme:[//authority]/robots.txt" For example, in the context of HTTP or FTP, the URI is: https://www.example.com/robots.txt ftp://ftp.example.com/robots.txt 2.3.1. Access Results 2.3.1.1. Successful Access If the crawler successfully downloads the robots.txt file, the crawler MUST follow the parseable rules. 2.3.1.2. Redirects It's possible that a server responds to a robots.txt fetch request with a redirect, such as HTTP 301 or HTTP 302 in the case of HTTP. The crawlers SHOULD follow at least five consecutive redirects, even across authorities (for example, hosts in the case of HTTP). If a robots.txt file is reached within five consecutive redirects, the robots.txt file MUST be fetched, parsed, and its rules followed in the context of the initial authority. If there are more than five consecutive redirects, crawlers MAY assume that the robots.txt file is unavailable. 2.3.1.3. "Unavailable" Status "Unavailable" means the crawler tries to fetch the robots.txt file and the server responds with status codes indicating that the resource in question is unavailable. For example, in the context of HTTP, such status codes are in the 400-499 range. If a server status code indicates that the robots.txt file is unavailable to the crawler, then the crawler MAY access any resources on the server. 2.3.1.4. "Unreachable" Status If the robots.txt file is unreachable due to server or network errors, this means the robots.txt file is undefined and the crawler MUST assume complete disallow. For example, in the context of HTTP, server errors are identified by status codes in the 500-599 range. If the robots.txt file is undefined for a reasonably long period of time (for example, 30 days), crawlers MAY assume that the robots.txt file is unavailable as defined in Section 2.3.1.3 or continue to use a cached copy. 2.3.1.5. Parsing Errors Crawlers MUST try to parse each line of the robots.txt file. Crawlers MUST use the parseable rules. 2.4. Caching Crawlers MAY cache the fetched robots.txt file's contents. Crawlers MAY use standard cache control as defined in [RFC9111]. Crawlers SHOULD NOT use the cached version for more than 24 hours, unless the robots.txt file is unreachable. 2.5. Limits Crawlers SHOULD impose a parsing limit to protect their systems; see Section 3. The parsing limit MUST be at least 500 kibibytes [KiB]. 3. Security Considerations The Robots Exclusion Protocol is not a substitute for valid content security measures. Listing paths in the robots.txt file exposes them publicly and thus makes the paths discoverable. To control access to the URI paths in a robots.txt file, users of the protocol should employ a valid security measure relevant to the application layer on which the robots.txt file is served -- for example, in the case of HTTP, HTTP Authentication as defined in [RFC9110]. To protect against attacks against their system, implementors of robots.txt parsing and matching logic should take the following considerations into account: Memory management: Section 2.5 defines the lower limit of bytes that must be processed, which inherently also protects the parser from out-of-memory scenarios. Invalid characters: Section 2.2 defines a set of characters that parsers and matchers can expect in robots.txt files. Out-of-bound characters should be rejected as invalid, which limits the available attack vectors that attempt to compromise the system. Untrusted content: Implementors should treat the content of a robots.txt file as untrusted content, as defined by the specification of the application layer used. For example, in the context of HTTP, implementors should follow the Security Considerations section of [RFC9110]. 4. IANA Considerations This document has no IANA actions. 5. Examples 5.1. Simple Example The following example shows: *: A group that's relevant to all user agents that don't have an explicitly defined matching group. It allows access to the URLs with the /publications/ path prefix, and it restricts access to the URLs with the /example/ path prefix and to all URLs with a .gif suffix. The "*" character designates any character, including the otherwise-required forward slash; see Section 2.2. foobot: A regular case. A single user agent followed by rules. The crawler only has access to two URL path prefixes on the site -- /example/page.html and /example/allowed.gif. The rules of the group are missing the optional space character, which is acceptable as defined in Section 2.2. barbot and bazbot: A group that's relevant for more than one user agent. The crawlers are not allowed to access the URLs with the /example/page.html path prefix but otherwise have unrestricted access to the rest of the URLs on the site. quxbot: An empty group at the end of the file. The crawler has unrestricted access to the URLs on the site. User-Agent: * Disallow: *.gif$ Disallow: /example/ Allow: /publications/ User-Agent: foobot Disallow:/ Allow:/example/page.html Allow:/example/allowed.gif User-Agent: barbot User-Agent: bazbot Disallow: /example/page.html User-Agent: quxbot EOF 5.2. Longest Match The following example shows that in the case of two rules, the longest one is used for matching. In the following case, /example/page/disallowed.gif MUST be used for the URI example.com/example/page/disallow.gif. User-Agent: foobot Allow: /example/page/ Disallow: /example/page/disallowed.gif 6. References 6.1. Normative References [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, <https://www.rfc-editor.org/info/rfc2046>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November 2003, <https://www.rfc-editor.org/info/rfc3629>. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, <https://www.rfc-editor.org/info/rfc3986>. [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, <https://www.rfc-editor.org/info/rfc5234>. [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. [RFC8288] Nottingham, M., "Web Linking", RFC 8288, DOI 10.17487/RFC8288, October 2017, <https://www.rfc-editor.org/info/rfc8288>. [RFC9110] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, June 2022, <https://www.rfc-editor.org/info/rfc9110>. [RFC9111] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Caching", STD 98, RFC 9111, DOI 10.17487/RFC9111, June 2022, <https://www.rfc-editor.org/info/rfc9111>. 6.2. Informative References [KiB] "Kibibyte", Simple English Wikipedia, the free encyclopedia, 17 September 2020, <https://simple.wikipedia.org/wiki/Kibibyte>. [ROBOTSTXT] "The Web Robots Pages (including /robots.txt)", 2007, <https://www.robotstxt.org/>. [SITEMAPS] "What are Sitemaps? (Sitemap protocol)", April 2020, <https://www.sitemaps.org/index.html>. Authors' Addresses Martijn Koster(editor)Stalworthy Manor Farm Suton Lane Wymondham, Norfolk NR18 9JG United Kingdom Email: m.koster@greenhills.co.uk Gary Illyes(editor)Google LLC Brandschenkestrasse 110 CH-8002 Zürich Switzerland Email: garyillyes@google.com Henner Zeller(editor)Google LLC 1600 Amphitheatre Pkwy Mountain View, CA 94043 United States of America Email: henner@google.com Lizzi Sassman(editor)Google LLC Brandschenkestrasse 110 CH-8002 Zürich Switzerland Email: lizzi@google.com