<CODE BEGINS> file "ietf-rib-extension@2023-11-01.yang"

module ietf-rib-extension {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-rib-extension";
  prefix rib-ext;

  import ietf-inet-types {
    prefix inet;
    reference
      "RFC 6991: Common YANG Data Types";
  }
  import ietf-interfaces {
    prefix if;
    reference
      "RFC 8343: A YANG Data Model for Interface
                 Management";
  }
  import ietf-routing {
    prefix rt;
    reference
      "RFC 8349: A YANG Data Model for Routing
                 Management (NMDA Version)";
  }
  import ietf-ipv4-unicast-routing {
    prefix v4ur;
    reference
      "RFC 8349: A YANG Data Model for Routing
                 Management (NMDA Version)";
  }
  import ietf-ipv6-unicast-routing {
    prefix v6ur;
    reference
      "RFC 8349: A YANG Data Model for Routing
                 Management (NMDA Version)";
  }

  import ietf-ospf {
    prefix ospf;
    reference "RFC 9129: YANG Data Model for the OSPF Protocol";
  }

  import ietf-isis {
    prefix isis;
    reference "RFC 9130: YANG Data Model for the IS-IS Protocol";
  }

  organization
    "IETF RTGWG (Routing Area Working Group)";
  contact
    "WG Web:   <https://datatracker.ietf.org/wg/rtgwg/>
     WG List:  <mailto:rtgwg@ietf.org>

     Author:   Acee Lindem
               <mailto:acee.ietf@gmail.com>
     Author:   Yingzhen Qu
               <mailto:yingzhen.qu@futurewei.com>";
  description
    "This YANG module extends the RIB defined in the ietf-routing
     YANG module with additional route attributes.

     This YANG module conforms to the Network Management
     Datastore Architecture (NMDA) as described in RFC 8342.

     Copyright (c) 2023 IETF Trust and the persons identified as
     authors of the code.  All rights reserved.

     Redistribution and use in source and binary forms, with or
     without modification, is permitted pursuant to, and subject to
     the license terms contained in, the Revised BSD License set
     forth in Section 4.c of the IETF Trust's Legal Provisions
     Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC 9403; see the
     RFC itself for full legal notices.";

  revision 2023-11-01 {
    description
      "Initial version.";
    reference
      "RFC 9403: A YANG Data Model for RIB Extensions";
  }

  /* Groupings */

  grouping rib-statistics {
    description
      "Statistics grouping used for RIB augmentation.";
    container statistics {
      config false;
      description
        "Container for RIB statistics.";
      leaf total-routes {
        type uint32;
        description
          "Total number of routes in the RIB.";
      }
      leaf total-active-routes {
        type uint32;
        description
          "Total number of active routes in the RIB.  An active
           route is the route that is preferred over other routes
           to the same destination prefix.";
      }
      leaf total-route-memory {
        type uint64;
        units "bytes";
        description
          "Total memory for all routes in the RIB.";
      }
      list protocol-statistics {
        description
          "RIB statistics for routing protocols installing
           routes in the RIB.";
        leaf protocol {
          type identityref {
            base rt:routing-protocol;
          }
          description
            "Routing protocol installing routes in the RIB.";
        }
        leaf routes {
          type uint32;
          description
            "Total number of routes in the RIB for the routing
             protocol identified by the 'protocol' entry.";
        }
        leaf active-routes {
          type uint32;
          description
            "Total number of active routes in the RIB for the
             routing protocol identified by the 'protocol' entry.
             An active route is preferred over other routes to the
             same destination prefix.";
        }
        leaf route-memory {
          type uint64;
          units "bytes";
          description
            "Total memory for all routes in the RIB for the
             routing protocol identified by the 'protocol'
             entry.";
        }
      }
    }
  }

  grouping repair-path {
    description
      "Grouping for the IP Fast Reroute (IPFRR) repair path.";
    container repair-path {
      description
        "IPFRR next-hop repair path.";
      leaf outgoing-interface {
        type if:interface-state-ref;
        description
          "Name of the outgoing interface.";
      }
      leaf next-hop-address {
        type inet:ip-address-no-zone;
        description
          "IP address of the next hop.";
      }
      leaf metric {
        type uint32;
        description
          "The metric for the repair path.  While the reroute
           repair is local and the metric is not advertised
           externally, the metric for the repair path is useful
           for troubleshooting purposes.";
      }
      reference
        "RFC 5714: IP Fast Reroute Framework";
    }
  }

  augment "/rt:routing/rt:control-plane-protocols/"
        + "rt:control-plane-protocol/rt:static-routes/v4ur:ipv4/"
        + "v4ur:route/v4ur:next-hop/v4ur:next-hop-options/"
        + "v4ur:simple-next-hop" {
    description
      "Augment 'simple-next-hop' case in IPv4 unicast route.";
    leaf preference {
      type uint32;
      default "1";
      description
        "The preference is used to select among multiple static
         routes.  Routes with a lower next-hop preference value
         are preferred, and equal-preference routes result in
         Equal-Cost Multipath (ECMP) static routes.";
    }
    leaf tag {
      type uint32;
      default "0";
      description
        "The tag is a 32-bit opaque value associated with the
         route that can be used for policy decisions such as
         advertisement and filtering of the route.";
    }
  }

  augment "/rt:routing/rt:control-plane-protocols/"
        + "rt:control-plane-protocol/rt:static-routes/v4ur:ipv4/"
        + "v4ur:route/v4ur:next-hop/v4ur:next-hop-options/"
        + "v4ur:next-hop-list/v4ur:next-hop-list/v4ur:next-hop" {
    description
      "Augment static route configuration 'next-hop-list'.";
    leaf preference {
      type uint32;
      default "1";
      description
        "The preference is used to select among multiple static
         routes.  Routes with a lower next-hop preference value
         are preferred, and equal-preference routes result in
         ECMP static routes.";
    }
    leaf tag {
      type uint32;
      default "0";
      description
        "The tag is a 32-bit opaque value associated with the
         route that can be used for policy decisions such as
         advertisement and filtering of the route.";
    }
  }

  augment "/rt:routing/rt:control-plane-protocols/"
        + "rt:control-plane-protocol/rt:static-routes/v6ur:ipv6/"
        + "v6ur:route/v6ur:next-hop/v6ur:next-hop-options/"
        + "v6ur:simple-next-hop" {
    description
      "Augment 'simple-next-hop' case in IPv6 unicast route.";
    leaf preference {
      type uint32;
      default "1";
      description
        "The preference is used to select among multiple static
         routes.  Routes with a lower next-hop preference value
         are preferred, and equal-preference routes result in
         ECMP static routes.";
    }
    leaf tag {
      type uint32;
      default "0";
      description
        "The tag is a 32-bit opaque value associated with the
         route that can be used for policy decisions such as
         advertisement and filtering of the route.";
    }
  }

  augment "/rt:routing/rt:control-plane-protocols/"
        + "rt:control-plane-protocol/rt:static-routes/v6ur:ipv6/"
        + "v6ur:route/v6ur:next-hop/v6ur:next-hop-options/"
        + "v6ur:next-hop-list/v6ur:next-hop-list/v6ur:next-hop" {
    description
      "Augment static route configuration 'next-hop-list'.";
    leaf preference {
      type uint32;
      default "1";
      description
        "The preference is used to select among multiple static
         routes.  Routes with a lower next-hop preference value
         are preferred, and equal-preference routes result in
         ECMP static routes.";
    }
    leaf tag {
      type uint32;
      default "0";
      description
        "The tag is a 32-bit opaque value associated with the
         route that can be used for policy decisions such as
         advertisement and filtering of the route.";
    }
  }

  augment "/rt:routing/rt:ribs/rt:rib" {
    description
      "Augment a RIB with statistics.";
    uses rib-statistics;
  }

  augment "/rt:routing/rt:ribs/rt:rib/"
        + "rt:routes/rt:route" {
    description
      "Augment a route in the RIB with common attributes.";
    leaf metric {
      when "not(derived-from("
        + "../rt:source-protocol, 'ospf:ospf')) "
        + "and not(derived-from( "
        + "../rt:source-protocol, 'isis:isis'))" {
        description
          "This augmentation is only valid for routes that don't
           have OSPF or IS-IS as the source protocol.  The YANG
           data models for OSPF and IS-IS already include a
           'metric' augmentation for routes.";
      }
      type uint32;
      description
        "The metric is a numeric value indicating the cost
         of the route from the perspective of the routing
         protocol installing the route.  In general, routes with
         a lower metric installed by the same routing protocol
         are lower cost to reach and are preferable to routes
         with a higher metric.  However, metrics from different
         routing protocols are not comparable.";
    }
    leaf-list tag {
      when "not(derived-from("
        + "../rt:source-protocol, 'ospf:ospf')) "
        + "and not(derived-from( "
        + "../rt:source-protocol, 'isis:isis'))" {
        description
          "This augmentation is only valid for routes that don't
           have OSPF or IS-IS as the source protocol.  The YANG
           data models for OSPF and IS-IS already include a 'tag'
           augmentation for routes.";
      }
      type uint32;
      description
        "A tag is a 32-bit opaque value associated with the
         route that can be used for policy decisions such as
         advertisement and filtering of the route.";
    }
    leaf application-tag {
      type uint32;
      description
        "The application-specific tag is an additional tag that
         can be used by applications that require semantics and/or
         policy different from that of the tag.  For example,
         the tag is usually automatically advertised in OSPF
         AS-External Link State Advertisements (LSAs) while this
         application-specific tag is not advertised implicitly.";
    }
  }

  augment "/rt:routing/rt:ribs/rt:rib/"
        + "rt:routes/rt:route/rt:next-hop/rt:next-hop-options/"
        + "rt:simple-next-hop" {
    description
      "Augment 'simple-next-hop' with 'repair-path'.";
    uses repair-path;
  }

  augment "/rt:routing/rt:ribs/rt:rib/"
        + "rt:routes/rt:route/rt:next-hop/rt:next-hop-options/"
        + "rt:next-hop-list/rt:next-hop-list/rt:next-hop" {
    description
      "Augment the next hop with a repair path.";
    uses repair-path;
  }
}

<CODE ENDS>