PACKAGES.TXT; Thu Oct 18 21:12:11 BST 2007 This file provides details on the Slackware packages found in the ./slackware/ directory. Total size of all packages (compressed): 1656 MB Total size of all packages (uncompressed): 4611 MB PACKAGE NAME: a2ps-4.13b-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 133 K PACKAGE SIZE (uncompressed): 450 K PACKAGE DESCRIPTION: a2ps: a2ps (any to PostScript filter) a2ps: a2ps: GNU a2ps is an Any to PostScript filter. Of course it processes a2ps: plain text files, but also pretty prints quite a few popular a2ps: programming languages. Also contained in this package is psutils, a a2ps: collection of programs for manipulating PostScript files. a2ps: a2ps: a2ps is used by Apsfilter, so be sure to install this package if you a2ps: plan to do any printing. a2ps: PACKAGE NAME: aaa_base-12.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: aaa_base: aaa_base (Basic Linux filesystem package) aaa_base: aaa_base: Sets up the empty directory tree for Slackware and adds an email to aaa_base: root's mailbox welcoming them to Linux. :) This package should be aaa_base: installed first, and never uninstalled. aaa_base: PACKAGE NAME: aaa_elflibs-12.0.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 4620 K PACKAGE SIZE (uncompressed): 11520 K PACKAGE DESCRIPTION: aaa_elflibs: aaa_elflibs (shared libraries needed by many programs) aaa_elflibs: aaa_elflibs: This is a collection of shared libraries needed to run Linux programs. aaa_elflibs: ELF (Executable and Linking Format) is the standard Linux binary aaa_elflibs: format. These libraries are gathered from other Slackware packages aaa_elflibs: and are intended to give a fairly complete initial set of libraries. aaa_elflibs: This package should be not upgraded or reinstalled (it could copy aaa_elflibs: over newer library versions). aaa_elflibs: PACKAGE NAME: aaa_elflibs32-1.0-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 4265 K PACKAGE SIZE (uncompressed): 11370 K PACKAGE DESCRIPTION: aaa_elflibs32: aaa_elflibs32 (shared libraries needed by many 32-bit programs) aaa_elflibs32: aaa_elflibs32: This is a collection of shared libraries needed to run Linux programs. aaa_elflibs32: ELF (Executable and Linking Format) is the standard Linux binary aaa_elflibs32: format. These libraries are gathered from other Slackware packages aaa_elflibs32: and are intended to give a fairly complete initial set of libraries. aaa_elflibs32: This package should be not upgraded or reinstalled (it could copy aaa_elflibs32: over newer library versions). aaa_elflibs32: aaa_elflibs32: This package contains 32-bit binaries. aaa_elflibs32: PACKAGE NAME: aaa_terminfo-5.6-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 630 K PACKAGE DESCRIPTION: aaa_terminfo: aaa_terminfo (a basic collection of terminfo entries) aaa_terminfo: aaa_terminfo: This is a starter set of files from the terminfo database, which aaa_terminfo: should be enough in most cases. The complete set (from which this aaa_terminfo: is derived) can be found in the ncurses package. aaa_terminfo: aaa_terminfo: The terminfo database describes the characteristics of terminals, so aaa_terminfo: don't try to log in without this package. :-) aaa_terminfo: PACKAGE NAME: aalib-1.4rc5-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 206 K PACKAGE SIZE (uncompressed): 600 K PACKAGE DESCRIPTION: aalib: aalib (ASCII Art library) _1l1vlvlvlvlvlvlvlvlvvl=. aalib: __111llvl+' __...._ +1lv11=. aalib: AA-lib is an ASCII art graphics _11vllvlv+ =vlvlvl1= /1vlvv1i=_ aalib: library. Internally, the AA-lib _vvllvlvlv= -+vlvlvlvlvlvlvlvdvl=_ aalib: API is similar to other graphics _:lvlvlvlvlv=. --^-^1lvlvlrlvv1s aalib: libraries, but it renders the =llvlvvlvlvv11lvl=.... -lvlevlvlvv aalib: the output into ASCII art (like =lvlvlvlvll-^+1vv11111v_ vlkllvllvl aalib: the example to the right :^) =lvlvlvlvl1 +1vv1v1lv _llvlvlvlvl aalib: The developers of AA-lib are +1lv |vlvl' -^-^- _1olvlvlvlv' aalib: Jan Hubicka, Thomas A. K. Kjaer, -1vl |lvlvlvlvlvlvlvlvv1vlvlvlvlv+. aalib: Tim Newsome, and Kamil Toman. +1 ^^^^^^^^^^^^^^^^^^^^^^^^vlv- aalib: -+uvlvlvlvlvlvlvlvlvlvlvlvl+_ aalib: -vlvlvlvlvlvlvlvllvlvl-' PACKAGE NAME: acct-6.3.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 57 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: acct: acct (process accounting utilities) acct: acct: This is a set of utilities which reports and summarizes data about acct: user connect times and process execution statistics. To activate acct: process accounting, create the log file (touch /var/log/pacct), and acct: then use the accton command to start it (accton /var/log/pacct). acct: Be aware that the log file can grow to be quite large. acct: acct: The GNU process accounting utilities were written by Noel Cragg. acct: PACKAGE NAME: acl-2.2.39_1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 145 K PACKAGE SIZE (uncompressed): 400 K PACKAGE DESCRIPTION: acl: acl (tools for using POSIX Access Control Lists) acl: acl: This package contains a set of tools and libraries for manipulating acl: POSIX Access Control Lists. POSIX Access Control Lists (defined in acl: POSIX 1003.1e draft standard 17) are used to define more fine-grained acl: discretionary access rights for files and directories. acl: PACKAGE NAME: acpid-1.0.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: acpid: acpid (ACPI daemon) acpid: acpid: Most modern computers support the Advanced Configuration and Power acpid: Interface (ACPI) standard to allow intelligent power management. acpid: This package contains acpid, which is the user-space daemon needed in acpid: order to make the Linux ACPI support completely functional. acpid: acpid: ACPI must be compiled into the kernel to run acpid. acpid: PACKAGE NAME: alsa-lib-1.0.14a-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 445 K PACKAGE SIZE (uncompressed): 1570 K PACKAGE DESCRIPTION: alsa-lib: alsa-lib (Advanced Linux Sound Architecture 32-bit library) alsa-lib: alsa-lib: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-lib: functionality to the Linux operating system. This is the ALSA library alsa-lib: (libasound) which is used by audio applications. alsa-lib: alsa-lib: For more information, see http://alsa-project.org alsa-lib: PACKAGE NAME: alsa-lib32-1.0.14a-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 315 K PACKAGE SIZE (uncompressed): 830 K PACKAGE DESCRIPTION: alsa-lib32: alsa-lib32 (Advanced Linux Sound Architecture 32-bit library) alsa-lib32: alsa-lib32: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-lib32: functionality to the Linux operating system. This is the ALSA library alsa-lib32: (libasound) which is used by audio applications. alsa-lib32: alsa-lib32: For more information, see http://alsa-project.org alsa-lib32: alsa-lib32: This package contains 32-bit binaries. alsa-lib32: PACKAGE NAME: alsa-oss-1.0.14-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 36 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: alsa-oss: alsa-oss (library/wrapper to use OSS programs with ALSA) alsa-oss: alsa-oss: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-oss: functionality to the Linux operating system. OSS (Open Sound System) alsa-oss: is an older sound system for Linux that ALSA is replacing. Using alsa-oss: the aoss wrapper you can use programs that only support OSS with ALSA alsa-oss: without having to load the OSS compatibility kernel modules. alsa-oss: PACKAGE NAME: alsa-utils-1.0.14-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 1045 K PACKAGE SIZE (uncompressed): 1720 K PACKAGE DESCRIPTION: alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities) alsa-utils: alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-utils: functionality to the Linux operating system. This package contains alsa-utils: command line audio utilities for use with ALSA: alsa-utils: alsactl (manage soundcard settings) alsa-utils: arecord/aplay (capture and play audio) alsa-utils: amixer (adjust mixer settings from the command line) alsa-utils: alsamixer (an ncurses-based console mixer) alsa-utils: alsa-utils: For more information, see http://alsa-project.org PACKAGE NAME: amarok-1.4.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 13232 K PACKAGE SIZE (uncompressed): 28630 K PACKAGE DESCRIPTION: amarok: amarok (music player) amarok: amarok: Amarok is a music player for Linux and Unix with an intuitive amarok: interface. Amarok makes playing the music you love easier than ever amarok: before -- and looks good doing it. amarok: amarok: Amarok's home page is: http://amarok.kde.org amarok: PACKAGE NAME: amp-0.7.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 51 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: amp: amp (An MP3 player) amp: amp: amp (Audio Mpeg Player) is a command-line MPEG audio decoder (MP3 amp: player). It works with both MPEG1 and MPEG2 audio streams (except for amp: the multichannel extensions defined in MPEG2), layers 2 and 3. amp: PACKAGE NAME: appres-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: appres: appres appres: appres: appres is part of X11. appres: appres: For more information about the X.Org Foundation (the providers of the appres: X.Org implementation of the X Window System), see their website: appres: appres: http://www.x.org appres: PACKAGE NAME: apr-1.2.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 247 K PACKAGE SIZE (uncompressed): 930 K PACKAGE DESCRIPTION: apr: apr (Apache Portable Runtime) apr: apr: The mission of the Apache Portable Runtime (APR) is to provide a apr: free library of C data structures and routines, forming a system apr: portability layer to as many operating systems as possible. apr: PACKAGE NAME: apr-util-1.2.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 400 K PACKAGE DESCRIPTION: apr-util: apr-util (Apache Portable Runtime utilities) apr-util: apr-util: The mission of the Apache Portable Runtime (APR) is to provide a apr-util: free library of C data structures and routines, forming a system apr-util: portability layer to as many operating systems as possible. apr-util: apr-util: This package contains additional utility interfaces for APR; apr-util: including support for XML, LDAP, database interfaces, URI parsing, apr-util: and more. apr-util: PACKAGE NAME: arts-1.5.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 1384 K PACKAGE SIZE (uncompressed): 6940 K PACKAGE DESCRIPTION: arts: arts (Analog Realtime Synthesizer) arts: arts: aRts is the core sound system for KDE, and is short for "analog arts: realtime synthesizer". aRts is designed to create or process sound arts: using small specialized modules. These may create a waveform, play arts: samples, filter data, add signals, perform effects (like delay, arts: flanger or chorus), or output the data to the soundcard. arts: PACKAGE NAME: ash-0.4.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 86 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: ash: ash (Kenneth Almquist's ash shell) ash: ash: A lightweight (92K) Bourne compatible shell. Great for machines with ash: low memory, but does not provide all the extras of shells like bash, ash: tcsh, and zsh. Runs most shell scripts compatible with the Bourne ash: shell. Note that under Linux, most scripts seem to use at least some ash: bash-specific syntax. The Slackware setup scripts are a notable ash: exception, since ash is the shell used on the install disks. NetBSD ash: uses ash as its /bin/sh. ash: PACKAGE NAME: aspell-0.60.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 995 K PACKAGE SIZE (uncompressed): 3550 K PACKAGE DESCRIPTION: aspell: aspell (spell checker) aspell: aspell: GNU Aspell is a spell checker designed to eventually replace Ispell. aspell: It can either be used as a library or as an independent spell checker. aspell: PACKAGE NAME: aspell-en-6.0_0-noarch_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 1577 K PACKAGE SIZE (uncompressed): 3550 K PACKAGE DESCRIPTION: aspell-en: aspell-en aspell-en: aspell-en: GNU Aspell 0.60 English Dictionary Package. aspell-en: PACKAGE NAME: at-3.1.10-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: at: at (delayed command execution) at: at: at and batch read shell commands from standard input (or a specified at: file) storing them as a job to be scheduled for execution at a later at: time. at: at: The 'at' command was written by David Parsons and Thomas Koenig. at: PACKAGE NAME: atk-1.18.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 333 K PACKAGE SIZE (uncompressed): 2020 K PACKAGE DESCRIPTION: atk: atk atk: atk: atk is a library of accessibility functions that is used by the atk: GTK+-2 toolkit. atk: PACKAGE NAME: atk32-1.18.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: atk32: atk32 atk32: atk32: atk is a library of accessibility functions that is used by the atk32: GTK+-2 toolkit. atk32: atk32: This package contains 32-bit binaries. atk32: PACKAGE NAME: attr-2.4.32_1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 77 K PACKAGE SIZE (uncompressed): 230 K PACKAGE DESCRIPTION: attr: attr (tools for using extended attributes on filesystems) attr: attr: This package contains a set of tools for manipulating extended attr: attributes (name:value pairs associated permanently with files and attr: directories) on filesystem objects, and the library and header files attr: needed to develop programs which make use of extended attributes. attr: Extended attributes are used to provide additional functionality to attr: a filesystem. For example, Access Control Lists (ACLs) are attr: implemented using extended attributes. attr: PACKAGE NAME: audacious-1.3.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 901 K PACKAGE SIZE (uncompressed): 2630 K PACKAGE DESCRIPTION: audacious: audacious (A relatively powerful media player) audacious: audacious: Audacious is a media player, based on Beep Media Player, which is in audacious: turn based on the X Multimedia System (XMMS). It is used to play audacious: audio and other kinds of media files. By default Audacious can play audacious: MPEG audio, Ogg Vorbis, RIFF wav, most module formats, and a few audacious: other formats. Audacious can be extended through plugins to play a audacious: number of other audio and video formats. audacious: audacious: The webpage for Audacious is: http://www.audacious-media-player.org. audacious: PACKAGE NAME: audacious-plugins-1.3.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1443 K PACKAGE SIZE (uncompressed): 3730 K PACKAGE DESCRIPTION: audacious-plugins: audacious-plugins (Plugins used by the Audacious media player) audacious-plugins: audacious-plugins: This is a collection of plugins for Audacious to support additional audacious-plugins: media formats. audacious-plugins: audacious-plugins: The webpage for Audacious is: http://www.audacious-media-player.org. audacious-plugins: PACKAGE NAME: audiofile-0.2.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 193 K PACKAGE SIZE (uncompressed): 680 K PACKAGE DESCRIPTION: audiofile: audiofile (audio support library) audiofile: audiofile: Audiofile is a library to handle various audio file formats, and is audiofile: used by the esound daemon. You can also use it to develop your own audiofile: audiofile applications. audiofile: PACKAGE NAME: aumix-2.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 67 K PACKAGE SIZE (uncompressed): 220 K PACKAGE DESCRIPTION: aumix: aumix (GTK+/ncurses audio mixer) aumix: aumix: This is a program for adjusting audio mixers from the command line or aumix: scripts, or interactively at the console or a terminal with a aumix: full-screen, ncurses-based interface or a GTK-based X interface. aumix: PACKAGE NAME: autoconf-2.61-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 729 K PACKAGE SIZE (uncompressed): 1860 K PACKAGE DESCRIPTION: autoconf: autoconf (generate configuration scripts) autoconf: autoconf: GNU autoconf is an extensible package of m4 macros that produce shell autoconf: scripts to automatically configure software source code packages. autoconf: These scripts can adapt the packages to many kinds of UNIX-like autoconf: systems without manual user intervention. Autoconf creates a autoconf: configuration script for a package from a template file that lists the autoconf: operating system features that the package can use, in the form of m4 autoconf: macro calls. You must install the "m4" package to be able to use autoconf: autoconf. autoconf: PACKAGE NAME: autofs-3.1.7-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 57 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: autofs: autofs (kernel-based automounter) autofs: autofs: autofs is a kernel-based automounter for Linux. It performs a job autofs: similar to amd(8) but relies on a small stub of kernel code instead of autofs: pretending to be an NFS server. The result is simpler code, better autofs: reliability, and much faster operation in the common case (everything autofs: already mounted.) autofs: PACKAGE NAME: automake-1.9.6-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 472 K PACKAGE SIZE (uncompressed): 1390 K PACKAGE DESCRIPTION: automake: automake (a Makefile generator) automake: automake: This is Automake, a Makefile generator. It was inspired by the 4.4BSD automake: make and include files, but aims to be portable and to conform to the automake: GNU standards for Makefile variables and targets. Automake is a Perl automake: script. The input files are called Makefile.am. The output files are automake: called Makefile.in; they are intended for use with Autoconf. Automake automake: requires certain things to be done in your configure.in. You must automake: install the "m4" and "perl" packages to be able to use automake. automake: PACKAGE NAME: bash-3.1.017-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 774 K PACKAGE SIZE (uncompressed): 1690 K PACKAGE DESCRIPTION: bash: bash (sh-compatible shell) bash: bash: The GNU Bourne-Again SHell. Bash is a sh-compatible command bash: interpreter that executes commands read from the standard input or bash: from a file. Bash also incorporates useful features from the Korn bash: and C shells (ksh and csh). Bash is ultimately intended to be a bash: conformant implementation of the IEEE Posix Shell and Tools bash: specification (IEEE Working Group 1003.2). bash: bash: Bash must be present for the system to boot properly. bash: PACKAGE NAME: bc-1.06.95-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 119 K PACKAGE SIZE (uncompressed): 260 K PACKAGE DESCRIPTION: bc: bc (An arbitrary precision calculator language) bc: bc: bc is an arbitrary precision numeric processing language. Syntax is bc: similar to C, but differs in many substantial areas. It supports bc: interactive execution of statements. bc is a utility included in the bc: POSIX P1003.2/D11 draft standard. bc: bc: The GNU version of bc was written by Philip A. Nelson. bc: PACKAGE NAME: bdftopcf-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: bdftopcf: bdftopcf bdftopcf: bdftopcf: bdftopcf is part of X11. bdftopcf: bdftopcf: For more information about the X.Org Foundation (the providers of the bdftopcf: X.Org implementation of the X Window System), see their website: bdftopcf: bdftopcf: http://www.x.org bdftopcf: PACKAGE NAME: beforelight-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: beforelight: beforelight beforelight: beforelight: beforelight is part of X11. beforelight: beforelight: For more information about the X.Org Foundation (the providers of the beforelight: X.Org implementation of the X Window System), see their website: beforelight: beforelight: http://www.x.org beforelight: PACKAGE NAME: biff+comsat-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: biff+comsat: biff+comsat (mail arrival notification daemon) biff+comsat: biff+comsat: Comsat is the server process which receives reports of incoming mail biff+comsat: and notifies users if they have requested this service. "biff" is biff+comsat: the program that requests comsat service "biff y", and may be placed biff+comsat: in a user's startup file if they'd like to hear a beep and trash biff+comsat: their console with each new piece of junk mail. ;-) biff+comsat: biff+comsat: Biff was the name of Heidi Stettner's dog, who barked when the biff+comsat: mailman came. Biff was well known to many of the early BSD developers biff+comsat: living in Evans Hall at U.C. Berkeley. PACKAGE NAME: bigreqsproto-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 10 K PACKAGE DESCRIPTION: bigreqsproto: bigreqsproto bigreqsproto: bigreqsproto: bigreqsproto is part of X11. bigreqsproto: bigreqsproto: For more information about the X.Org Foundation (the providers of the bigreqsproto: X.Org implementation of the X Window System), see their website: bigreqsproto: bigreqsproto: http://www.x.org bigreqsproto: PACKAGE NAME: bin-11.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: bin: bin (some command-line utilities) bin: bin: The bin package is a collection of miscellaneous command-line bin: utilities. Some of these (such as 'tempfile') are used in system bin: scripts. bin: PACKAGE NAME: bin86-0.16.15-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 64 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: bin86: bin86 (8086 assembler/loader) bin86: bin86: This is a complete 8086 assembler and loader which can make 32-bit bin86: code for the 386+ processors. In the past it was used to compile the bin86: 16-bit bootsector and setup binaries for the kernel, but modern bin86: (2.4.x or newer) kernels use GNU ld instead. bin86: bin86: The bin86 package is needed to compile 2.2.x or earlier kernels. bin86: PACKAGE NAME: bind-9.4.1_P1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2038 K PACKAGE SIZE (uncompressed): 5660 K PACKAGE DESCRIPTION: bind: bind (DNS server and utilities) bind: bind: The named daemon and support utilities such as dig, host, and bind: nslookup. Sample configuration files for running a simple caching bind: nameserver are included. Documentation for advanced name server bind: setup can be found in /usr/doc/bind-9.x.x/. bind: PACKAGE NAME: binutils-2.17.50.0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 3561 K PACKAGE SIZE (uncompressed): 9720 K PACKAGE DESCRIPTION: binutils: binutils (GNU binary development tools) binutils: binutils: Binutils is a collection of binary utilities. It includes "as" (the binutils: portable GNU assembler), "ld" (the GNU linker), and other utilities binutils: for creating and working with binary programs. binutils: binutils: These utilities are REQUIRED to compile C, C++, Objective-C, Fortran, binutils: and most other programming languages. binutils: PACKAGE NAME: bison-2.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 382 K PACKAGE SIZE (uncompressed): 1060 K PACKAGE DESCRIPTION: bison: bison (parser generator similar to yacc) bison: bison: GNU "Bison" is a general-purpose parser generator that converts a bison: grammar description for an LALR(1) context-free grammar into a C bison: program to parse that grammar. bison: bison: Bison is upward compatible with Yacc: all properly-written Yacc bison: grammars ought to work with Bison with no change. Anyone familiar bison: with Yacc should be able to use Bison with little trouble. bison: PACKAGE NAME: bitchx-1.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1543 K PACKAGE SIZE (uncompressed): 3910 K PACKAGE DESCRIPTION: bitchx: BitchX (chat client) bitchx: bitchx: BitchX is an advanced Internet Relay Chat (IRC) client. bitchx: PACKAGE NAME: bitmap-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 53 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: bitmap: bitmap bitmap: bitmap: bitmap is part of X11. bitmap: bitmap: For more information about the X.Org Foundation (the providers of the bitmap: X.Org implementation of the X Window System), see their website: bitmap: bitmap: http://www.x.org bitmap: PACKAGE NAME: blackbox-0.65.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 362 K PACKAGE SIZE (uncompressed): 1040 K PACKAGE DESCRIPTION: blackbox: blackbox (Blackbox window manager) blackbox: blackbox: Blackbox is that fast, light window manager you have been looking for blackbox: without all those annoying library dependencies. blackbox: blackbox: Also included in this package is the bbkeys utility for controlling blackbox: keyboard shortcut commands from within Blackbox. blackbox: blackbox: The Blackbox home page is http://blackboxwm.sourceforge.net blackbox: PACKAGE NAME: bluez-firmware-1.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 78 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: bluez-firmware: bluez-firmware (Bluetooth(TM) firmware) bluez-firmware: bluez-firmware: The bluez-firmware package contains firmware needed by various bluez-firmware: chipsets to support Bluetooth(TM) on Linux. bluez-firmware: bluez-firmware: For more info, visit: http://www.bluez.org bluez-firmware: PACKAGE NAME: bluez-hcidump-1.34-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 97 K PACKAGE SIZE (uncompressed): 260 K PACKAGE DESCRIPTION: bluez-hcidump: bluez-hcidump (Linux Bluetooth(TM) analyzer) bluez-hcidump: bluez-hcidump: The bluez-hcidump package contains a network analyzer for bluez-hcidump: Bluetooth(TM). The hcidump utility reads raw HCI data coming from and bluez-hcidump: going to a Bluetooth device and prints commands, events and data. bluez-hcidump: bluez-hcidump: For more info, visit: http://www.bluez.org bluez-hcidump: PACKAGE NAME: bluez-libs-3.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 72 K PACKAGE SIZE (uncompressed): 260 K PACKAGE DESCRIPTION: bluez-libs: bluez-libs (Bluetooth(TM) wireless libraries) bluez-libs: bluez-libs: The bluez-libs package contains an implementation of the Bluetooth(TM) bluez-libs: wireless standards specifications for Linux. bluez-libs: bluez-libs: For more info, visit: http://www.bluez.org bluez-libs: PACKAGE NAME: bluez-utils-3.9-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 441 K PACKAGE SIZE (uncompressed): 1110 K PACKAGE DESCRIPTION: bluez-utils: bluez-utils (Utilities for working with Bluetooth(TM)) bluez-utils: bluez-utils: The bluez-utils package contains utilities for supporting bluez-utils: Bluetooth(TM) on Linux. bluez-utils: bluez-utils: For more info, visit: http://www.bluez.org bluez-utils: PACKAGE NAME: bootp-2.4.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 69 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: bootp: bootp bootp: bootp: This is an enhanced version of the CMU BOOTP server which was derived bootp: from the original BOOTP server created by Bill Croft at Stanford. bootp: BOOTP allows a network administrator to setup networking information bootp: for clients via an /etc/bootptab on a server so that the clients can bootp: automatically get their networking information. bootp: PACKAGE NAME: bpe-2.01.00-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 52 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: bpe: bpe (Binary Patch Editor) bpe: bpe: bpe is a simple, screen-oriented editor for searching and editing bpe: ordinary files in either ASCII or hexadecimal modes. bpe: bpe: bpe was written by Andreas Pleschutznig. Bill Davidsen contributed bpe: additional features, as did Ralphe Neill (the current maintainer). bpe: PACKAGE NAME: bridge-utils-1.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 140 K PACKAGE DESCRIPTION: bridge-utils: bridge-utils (network Ethernet bridging utilities) bridge-utils: bridge-utils: This package contains utilities for configuring Linux Ethernet bridge-utils: bridges. The Linux Ethernet bridge can be used for connecting bridge-utils: multiple Ethernet devices together. The connecting is fully bridge-utils: transparent. Hosts connected to one Ethernet device see hosts bridge-utils: connected through a bridge to the other Ethernet devices directly. bridge-utils: bridge-utils: bridge-utils was written by Stephen Hemminger and Lennert Buytenhek. bridge-utils: PACKAGE NAME: bsd-finger-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: bsd-finger: bsd-finger (user information lookup program) bsd-finger: bsd-finger: The finger displays information about the system users. Finger bsd-finger: displays the user's login name, real name, terminal name and write bsd-finger: status (as a ``*'' after the terminal name if write permission is bsd-finger: denied), idle time, login time, office location and office phone bsd-finger: number. bsd-finger: bsd-finger: As fingerd leaks semi-private information about your machine's bsd-finger: usernames and other data, fingerd should be used with caution. bsd-finger: Allow machines on a need-to-know basis. PACKAGE NAME: bsd-games-2.13-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/y PACKAGE SIZE (compressed): 2324 K PACKAGE SIZE (uncompressed): 5690 K PACKAGE DESCRIPTION: bsd-games: bsd-games (Classic BSD text games collection) bsd-games: bsd-games: Games that go in /usr/games: adventure arithmetic atc backgammon bsd-games: banner battlestar bcd caesar canfield cfscores countmail cribbage bsd-games: factor fish fortune gomoku hangman hunt mille monop morse number bsd-games: phantasia pig pom ppt primes quiz rain random robots rot13 sail bsd-games: snake snscore teachgammon trek wargames worm worms wump bsd-games: bsd-games: Adds a call to 'fortune' to /etc/profile.d/ so that users will get a bsd-games: fortune message when they log in. bsd-games: PACKAGE NAME: bzip2-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 182 K PACKAGE SIZE (uncompressed): 560 K PACKAGE DESCRIPTION: bzip2: bzip2 (a block-sorting file compressor) bzip2: bzip2: Bzip2 compresses files using the Burrows-Wheeler block sorting text bzip2: compression algorithm, and Huffman coding. Compression is generally bzip2: considerably better than that achieved by more conventional LZ77/LZ78- bzip2: based compressors, and approaches the performance of the PPM family of bzip2: statistical compressors. bzip2: bzip2: Julian Seward is the author of bzip2. bzip2: PACKAGE NAME: cairo-1.4.10-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 431 K PACKAGE SIZE (uncompressed): 1730 K PACKAGE DESCRIPTION: cairo: cairo (graphics library used by GTK+) cairo: cairo: Cairo is a vector graphics library designed to provide high-quality cairo: display and print output. Cairo is designed to produce cairo: identical output on all output media while taking advantage of display cairo: hardware acceleration when available (eg. through the X Render cairo: Extension or OpenGL). cairo: PACKAGE NAME: cairo32-1.4.10-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 229 K PACKAGE SIZE (uncompressed): 510 K PACKAGE DESCRIPTION: cairo32: cairo (graphics library used by GTK+) cairo32: cairo32: Cairo is a vector graphics library designed to provide high-quality cairo32: display and print output. Cairo is designed to produce cairo32: identical output on all output media while taking advantage of display cairo32: hardware acceleration when available (eg. through the X Render cairo32: Extension or OpenGL). cairo32: cairo32: This package contains 32-bit binaries. cairo32: PACKAGE NAME: ccache-2.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: ccache: ccache (a fast compiler cache) ccache: ccache: ccache is a compiler cache. It speeds up re-compilation of C/C++ code ccache: by caching previous compiles and detecting when the same compile is ccache: being done again. ccache: ccache: ccache was written by Andrew Tridgell. ccache: PACKAGE NAME: cdparanoia-IIIalpha9.8-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 123 K PACKAGE SIZE (uncompressed): 340 K PACKAGE DESCRIPTION: cdparanoia: cdparanoia (digital audio extraction tool) cdparanoia: cdparanoia: Cdparanoia is a Compact Disc Digital Audio (CDDA) extraction tool, cdparanoia: commonly known on the net as a 'ripper'. It reads digital audio data cdparanoia: from a Compact Disc and saves it to sound files. Cdparanoia has been cdparanoia: designed to read correct audio data even using cheap CDROM drives cdparanoia: prone to misalignment, frame jitter and loss of streaming. cdparanoia: Cdparanoia will also read and repair data from CDs that have been cdparanoia: damaged in some way. cdparanoia: PACKAGE NAME: cdrdao-1.2.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 484 K PACKAGE SIZE (uncompressed): 1280 K PACKAGE DESCRIPTION: cdrdao: cdrdao (CD burning utility) cdrdao: cdrdao: cdrdao burns proper disc-at-once (DAO) audio discs. In DAO mode the cdrdao: disc is written in one shot, so you don't have to have irritating 2 cdrdao: second gaps interrupting a live recording. cdrdao: PACKAGE NAME: cdrtools-2.01.01a23-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 1418 K PACKAGE SIZE (uncompressed): 3640 K PACKAGE DESCRIPTION: cdrtools: cdrtools cdrtools: cdrtools: Tools for mastering and writing compact discs. cdrtools: cdrtools: cdda2wav -- CD audio sampling utility. cdrtools: cdrecord -- burn discs in most ATAPI and SCSI CD-R drives. cdrtools: mkisofs -- create ISO9660/HFS/Joliet CD-ROM images. cdrtools: mkzftree -- compress a file tree to make a compressed CD-ROM. cdrtools: PACKAGE NAME: clisp-2.41a-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 12445 K PACKAGE SIZE (uncompressed): 51470 K PACKAGE DESCRIPTION: clisp: clisp (a Common Lisp implementation) clisp: clisp: Common Lisp is a high-level, general-purpose programming language. clisp: GNU CLISP is a Common Lisp implementation by Bruno Haible of Karlsruhe clisp: University and Michael Stoll of Munich University, both in Germany. clisp: It mostly supports the Lisp described in the ANSI Common Lisp standard. clisp: The user interface comes in German, English, French, Spanish, Dutch clisp: and Russian. GNU CLISP includes an interpreter, a compiler, a clisp: debugger, a large subset of CLOS, a foreign language interface and a clisp: socket interface. An X11 interface is available through CLX and clisp: Garnet. PACKAGE NAME: cmake-2.4.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 4385 K PACKAGE SIZE (uncompressed): 15070 K PACKAGE DESCRIPTION: cmake: CMake, the cross-platform, open-source make system. cmake: cmake: CMake is used to control the software process using simple platform cmake: and compiler independed configuration files. CMake generates cmake: native makefiles and workspaces that can be used in the cmake: compiler environment of your choice. cmake: cmake: CMake's home on the web is: http://www.cmake.org cmake: cmake: PACKAGE NAME: compiz-0.5.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 497 K PACKAGE SIZE (uncompressed): 1530 K PACKAGE DESCRIPTION: compiz: compiz compiz: compiz: compiz is part of X11. compiz: compiz: For more information about the X.Org Foundation (the providers of the compiz: X.Org implementation of the X Window System), see their website: compiz: compiz: http://www.x.org compiz: PACKAGE NAME: compositeproto-0.3.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: compositeproto: compositeproto compositeproto: compositeproto: compositeproto is part of X11. compositeproto: compositeproto: For more information about the X.Org Foundation (the providers of the compositeproto: X.Org implementation of the X Window System), see their website: compositeproto: compositeproto: http://www.x.org compositeproto: PACKAGE NAME: coreutils-6.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 3038 K PACKAGE SIZE (uncompressed): 8270 K PACKAGE DESCRIPTION: coreutils: coreutils (core GNU utilities) coreutils: coreutils: These are the GNU core utilities, the basic command line programs coreutils: such as 'mkdir', 'ls', and 'rm' that are needed for the system to coreutils: run. This package is the union of the GNU fileutils, sh-utils, and coreutils: textutils packages. Most of these programs have significant coreutils: advantages over their Unix counterparts, such as greater speed, coreutils: additional options, and fewer arbitrary limits. coreutils: PACKAGE NAME: cpio-2.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 75 K PACKAGE SIZE (uncompressed): 200 K PACKAGE DESCRIPTION: cpio: cpio (backup and archiving utility) cpio: cpio: This is GNU cpio, a program to manage archives of files. This package cpio: also includes mt, a tape drive control program. cpio copies files into cpio: or out of a cpio or tar archive, which is a file that contains other cpio: files plus information about them, such as their pathname, owner, cpio: timestamps, and access permissions. The archive can be another file on cpio: the disk, a magnetic tape, or a pipe. cpio: PACKAGE NAME: cryptsetup-1.0.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 319 K PACKAGE SIZE (uncompressed): 720 K PACKAGE DESCRIPTION: cryptsetup: cryptsetup (utility for setting up encrypted filesystems) cryptsetup: cryptsetup: LUKS is a standard for cross-platform hard disk encryption. cryptsetup: It provides secure management of multiple userpasswords and cryptsetup: stores setup information in the partition header. cryptsetup: LUKS for dm-crypt is now implemented in cryptsetup replacing the cryptsetup: original cryptsetup. It provides all the functionally of the cryptsetup: original version plus all LUKS features. cryptsetup: cryptsetup: cryptsetup home: http://luks.endorphin.org/dm-crypt cryptsetup: PACKAGE NAME: cscope-15.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 101 K PACKAGE SIZE (uncompressed): 350 K PACKAGE DESCRIPTION: cscope: cscope (source code browsing tool) cscope: cscope: Cscope is a text screen based source browsing tool. Although it is cscope: primarily designed to search C code (including lex and yacc files), cscope: it can also be used for C++ code. cscope: cscope: For more information, see http://cscope.sourceforge.net. cscope: PACKAGE NAME: cups-1.2.11-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 2865 K PACKAGE SIZE (uncompressed): 10120 K PACKAGE DESCRIPTION: cups: CUPS (Common UNIX Printing System) cups: cups: The Common UNIX Printing System provides a portable printing layer for cups: UNIX(R)-like operating systems. It has been developed by Easy Software cups: Products to promote a standard printing solution for all UNIX vendors cups: and users. CUPS uses the Internet Printing Protocol ("IPP") as the cups: basis for managing print jobs and queues. The CUPS package includes cups: System V and Berkeley command-line interfaces, a PostScript RIP cups: package for supporting non-PostScript printer drivers, and tools for cups: creating additional printer drivers and other CUPS services. cups: PACKAGE NAME: curl-7.16.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 707 K PACKAGE SIZE (uncompressed): 1780 K PACKAGE DESCRIPTION: curl: curl curl: curl: Curl is a command line tool for transferring data specified with URL curl: syntax. The command is designed to work without user interaction or curl: any kind of interactivity. Curl offers a busload of useful tricks curl: like proxy support, user authentication, ftp upload, HTTP post, SSL curl: (https:) connections, cookies, file transfer resume and more. curl: curl: libcurl is a library that Curl uses to do its job. It is readily curl: available to be used by your software, too. curl: PACKAGE NAME: cvs-1.11.22-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 899 K PACKAGE SIZE (uncompressed): 1550 K PACKAGE DESCRIPTION: cvs: cvs (Concurrent Versions System) cvs: cvs: CVS is a version control system, which allows you to keep old versions cvs: of files (usually source code), keep a log of who, when, and why cvs: changes occurred, etc., like RCS or SCCS. It handles multiple cvs: developers, multiple directories, triggers to enable/log/control cvs: various operations, and can work over a wide area network. cvs: cvs: Some of the people who have worked on CVS include: Dick Grune, cvs: Brian Berliner, Jeff Polk, and others too numerous to mention. cvs: PACKAGE NAME: cxxlibs-6.0.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 503 K PACKAGE SIZE (uncompressed): 1760 K PACKAGE DESCRIPTION: cxxlibs: cxxlibs (C++ shared library compatibility package) cxxlibs: cxxlibs: This package contains the shared libraries needed to run dynamically cxxlibs: linked C++ binaries linked with older versions of libstdc++. cxxlibs: PACKAGE NAME: cyrus-sasl-2.1.22-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 552 K PACKAGE SIZE (uncompressed): 1690 K PACKAGE DESCRIPTION: cyrus-sasl: cyrus-sasl (Simple Authentication and Security Layer) cyrus-sasl: cyrus-sasl: This is the Cyrus SASL library. Cyrus SASL is used by mail programs cyrus-sasl: on the client or server side to provide authentication and cyrus-sasl: authorization services. See RFC 2222 for more information. cyrus-sasl: PACKAGE NAME: damageproto-1.1.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: damageproto: damageproto damageproto: damageproto: damageproto is part of X11. damageproto: damageproto: For more information about the X.Org Foundation (the providers of the damageproto: X.Org implementation of the X Window System), see their website: damageproto: damageproto: http://www.x.org damageproto: PACKAGE NAME: db42-4.2.52-x86_64_slamd64-6.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 474 K PACKAGE SIZE (uncompressed): 1230 K PACKAGE DESCRIPTION: db42: db4 (Berkeley database library version 4.2) db42: db42: The Berkeley Database (Berkeley DB) library provides embedded database db42: support for both traditional and client/server applications. db42: db42: This package should be installed if compatibility is needed with db42: databases created with the Berkeley DB version 4.2. db42: PACKAGE NAME: db44-4.4.20-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2257 K PACKAGE SIZE (uncompressed): 6550 K PACKAGE DESCRIPTION: db44: db4 (Berkeley database library version 4.4.x) db44: db44: The Berkeley Database (Berkeley DB) library provides embedded database db44: support for both traditional and client/server applications. db44: db44: This package should be installed if compatibility is needed with db44: databases created with the Berkeley DB version 4.4.x. db44: PACKAGE NAME: dbus-1.0.2-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 607 K PACKAGE SIZE (uncompressed): 1970 K PACKAGE DESCRIPTION: dbus: dbus (D-Bus message bus system) dbus: dbus: D-Bus supplies both a system daemon (for events such as "new hardware dbus: device added" or "printer queue changed") and a per user login dbus: session daemon (for general IPC needs among user applications). dbus: Also, the message bus is built on top of a general one-to-one message dbus: passing framework, which can be used by any two apps to communicate dbus: directly (without going through the message bus daemon). dbus: PACKAGE NAME: dbus-glib-0.73-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 128 K PACKAGE SIZE (uncompressed): 550 K PACKAGE DESCRIPTION: dbus-glib: dbus-glib (Glib bindings for dbus) dbus-glib: dbus-glib: This package includes the glib bindings for the dbus IPC library. dbus-glib: PACKAGE NAME: dbus-qt3-0.70-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: dbus-qt3: dbus-qt3 (Qt3 bindings for dbus) dbus-qt3: dbus-qt3: This package contains the qt3 bindings for the D-Bus IPC suite. dbus-qt3: PACKAGE NAME: dcron-2.3.3-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: dcron: dcron (Dillon's Cron daemon) dcron: dcron: The cron daemon runs in the background and executes tasks on behalf of dcron: users at the appropriate time. Many timed system tasks are started dcron: with cron, such as the nightly indexing with updatedb. dcron: dcron: dcron was written entirely from scratch by Matthew Dillon. dcron: PACKAGE NAME: dejavu-ttf-2.17-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3506 K PACKAGE SIZE (uncompressed): 6430 K PACKAGE DESCRIPTION: dejavu-ttf: dejavu-ttf (DejaVu fonts) dejavu-ttf: dejavu-ttf: The DejaVu fonts are a font family based on the Bitstream Vera Fonts dejavu-ttf: (http://gnome.org/fonts/). Its purpose is to provide a wider range dejavu-ttf: of characters (see http://dejavu.sf.net for more information) while dejavu-ttf: maintaining the original look and feel. dejavu-ttf: dejavu-ttf: DejaVu fonts are based on Bitstream Vera fonts version 1.10. dejavu-ttf: PACKAGE NAME: desktop-file-utils-0.12-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: desktop-file-utils: desktop-file-utils (Utilities for manipulating desktop files) desktop-file-utils: desktop-file-utils: Some utilities from freedesktop.org for handling .desktop files: desktop-file-utils: desktop-file-utils: desktop-file-validate: validates a desktop file and prints desktop-file-utils: warnings/errors about spec violations. desktop-file-utils: desktop-file-install: installs a desktop file to the applications desktop-file-utils: directory, optionally munging it a bit in transit. desktop-file-utils: desktop-menu-tool: loads .vfolder-info and .menu files and does desktop-file-utils: operations on them. desktop-file-utils: PACKAGE NAME: devel32-1.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 4378 K PACKAGE SIZE (uncompressed): 10600 K PACKAGE DESCRIPTION: devel32: devel32 (Files commonly needed for 32-bit development) devel32: devel32: This package contains several files commonly needed for devel32: 32-bit development. devel32: devel32: It also contains a shell script (/etc/profile.d/32dev.sh) devel32: that sets up your environment for 32-bit development. This devel32: should generally not be made executable, as it will interfere devel32: with normal usage, however can be useful to source from a devel32: terminal when you want to build something as 32-bits. devel32: PACKAGE NAME: device-mapper-1.02.19-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 411 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE DESCRIPTION: device-mapper: device-mapper (device-mapper for logical volume management) device-mapper: device-mapper: The goal of device-mapper is to support volume management. The device-mapper: driver enables the definition of new block devices composed of device-mapper: ranges of sectors of existing devices. This can be used to define device-mapper: disk partitions or logical volumes. device-mapper: device-mapper: device-mapper is required by LVM2, the Logical Volume Manager. device-mapper: PACKAGE NAME: devs-2.3.1-noarch_slamd64-25.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 105 K PACKAGE SIZE (uncompressed): 5010 K PACKAGE DESCRIPTION: devs: devs (system device files) devs: devs: This package creates special files in the /dev directory that devs: represent your system's hardware, and a tool (/dev/MAKEDEV) for devs: creating new device files. These files are required to access devs: hardware on a Linux system. devs: PACKAGE NAME: dhcp-3.0.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 827 K PACKAGE SIZE (uncompressed): 1770 K PACKAGE DESCRIPTION: dhcp: dhcp (DHCP server and client utilities) dhcp: dhcp: This package provides the ISC's DHCP utilities, including both a dhcp: server and client. The DHCP protocol allows a host to contact a dhcp: central server which maintains a list of IP addresses which may be dhcp: assigned on one or more subnets. A DHCP client may request an dhcp: address from this pool, and then use it temporarily for communication dhcp: on the network. The DHCP protocol also provides a mechanism whereby dhcp: a client can learn important details about the network to which it is dhcp: attached, such as the location of a default router or name server. dhcp: PACKAGE NAME: dhcpcd-2.0.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: dhcpcd: dhcpcd (DHCP client daemon) dhcpcd: dhcpcd: The DHCP client program dhcpcd is used to connect to a network by dhcpcd: contacting a DHCP server. dhcpcd gets an IP address and other dhcpcd: information from a corresponding DHCP server, configures the network dhcpcd: interface automatically, and tries to renew the lease time according dhcpcd: to RFC2131 or RFC1541 depending on the command line option. dhcpcd: PACKAGE NAME: dialog-1.1_20070528-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 128 K PACKAGE SIZE (uncompressed): 370 K PACKAGE DESCRIPTION: dialog: dialog (display dialog boxes from shell scripts) dialog: dialog: Dialog is a program to present a variety of questions or display dialog: messages using dialog boxes from a shell script. The Slackware dialog: package management script "pkgtool" uses this, as do various other dialog: menu-driven console scripts. dialog: dialog: Dialog was originally contributed to Slackware by Savio Lam, and has dialog: been contributed to by many. Dialog is currently maintained by dialog: Thomas E. Dickey. dialog: PACKAGE NAME: diffstat-1.43-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: diffstat: diffstat (produces statistics from diff output) diffstat: diffstat: DiffStat is a simple filter that reads the output of the 'diff' diffstat: program and displays a histogram of insertions, deletions, and diffstat: modifications per-file. It is useful for reviewing large, complex diffstat: patch files. diffstat: diffstat: Thomas E. Dickey is the author of DiffStat. diffstat: PACKAGE NAME: diffutils-2.8.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 213 K PACKAGE SIZE (uncompressed): 650 K PACKAGE DESCRIPTION: diffutils: diffutils (finds differences between files) diffutils: diffutils: The GNU diff utilities finds differences between files. A major use diffutils: for this package is to make source code patches. diffutils: PACKAGE NAME: dirmngr-1.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 202 K PACKAGE SIZE (uncompressed): 500 K PACKAGE DESCRIPTION: dirmngr: CRL (Certificate Revocation Lists Manager) dirmngr: dirmngr: Dirmngr is a server for managing and downloading certificate dirmngr: revocation lists (CRLs) for X.509 certificates and for downloading dirmngr: the certificates themselves. Dirmngr also handles OCSP requests as dirmngr: an alternative to CRLs. Dirmngr is either invoked internally by dirmngr: gpgsm (from gnupg 2.x) or when running as a system daemon through dirmngr: the dirmngr-client tool. dirmngr: PACKAGE NAME: distcc-2.18.3-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 166 K PACKAGE SIZE (uncompressed): 400 K PACKAGE DESCRIPTION: distcc: distcc (distributed C/C++ compiler/daemon) distcc: distcc: distcc allows compilation of C code to be distributed across several distcc: machines on a network. distcc should always generate the same results distcc: as a local compile, is simple to install and use, and is often distcc: significantly faster than a local compile. distcc: distcc: IMPORTANT SECURITY NOTE: distccd should only run on trusted networks. distcc: distcc: distcc was written by Martin Pool. distcc: PACKAGE NAME: dmapi-2.2.5_1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: dmapi: dmapi (Data Management API library) dmapi: dmapi: A library required to use the Data Management API (DMAPI). dmapi: This interface is defined in the X/Open document 'Systems Management: dmapi: Data Storage Managment (XDSM) API' dated February 1997. dmapi: dmapi: The DMAPI library is used by the xfsdump utility. dmapi: PACKAGE NAME: dmidecode-2.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 54 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: dmidecode: dmidecode (DMI table decoder) dmidecode: dmidecode: dmidecode is a tool for dumping a computer's DMI table (some say dmidecode: SMBIOS) contents in a human-readable format. This table contains a dmidecode: description of the system's hardware components, as well as other dmidecode: useful pieces of information such as serial numbers and BIOS dmidecode: revision. dmidecode: dmidecode: dmidecode was written by Alan Cox and Jean Delvare. dmidecode: PACKAGE NAME: dmxproto-2.2.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: dmxproto: dmxproto dmxproto: dmxproto: dmxproto is part of X11. dmxproto: dmxproto: For more information about the X.Org Foundation (the providers of the dmxproto: X.Org implementation of the X Window System), see their website: dmxproto: dmxproto: http://www.x.org dmxproto: PACKAGE NAME: dnsmasq-2.39-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 190 K PACKAGE SIZE (uncompressed): 480 K PACKAGE DESCRIPTION: dnsmasq: dnsmasq (small DNS and DHCP server) dnsmasq: dnsmasq: Dnsmasq is a lightweight, easy to configure DNS forwarder and DHCP dnsmasq: server. It is designed to provide DNS (and optionally DHCP) to a dnsmasq: small network, and can serve the names of local machines which are not dnsmasq: in the global DNS. dnsmasq: dnsmasq: Dnsmasq was written by Simon Kelley. dnsmasq: PACKAGE NAME: dosfstools-2.11-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 48 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: dosfstools: dosfstools (tools for working with FAT filesystems) dosfstools: dosfstools: Utilities for creating FAT filesystems (mkdosfs), and for checking dosfstools: and repairing them (dosfsck). dosfstools: PACKAGE NAME: doxygen-1.5.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 2838 K PACKAGE SIZE (uncompressed): 7330 K PACKAGE DESCRIPTION: doxygen: doxygen (documentation generator) doxygen: doxygen: Doxygen is a documentation system for C++, C, Java, IDL, and to some doxygen: extent PHP and C#. Doxygen generates project documentation using doxygen: special documentation blocks in the source code, easing the process of doxygen: keeping docs and code in sync. Doxygen produces documentation in doxygen: several output formats, including HTML, LaTeX, man pages, RTF, XML, doxygen: compressed HTML, PostScript, and PDF. doxygen: PACKAGE NAME: dvd+rw-tools-7.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 117 K PACKAGE SIZE (uncompressed): 290 K PACKAGE DESCRIPTION: dvd+rw-tools: dvd+rw-tools dvd+rw-tools: dvd+rw-tools: A collection of tools to master DVD+RW/+R/-R/-RW media. For further dvd+rw-tools: information see http://fy.chalmers.se/~appro/linux/DVD+RW/. dvd+rw-tools: dvd+rw-tools: The DVD+RW tools were written by Andy Polyakov. dvd+rw-tools: PACKAGE NAME: e2fsprogs-1.39-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 798 K PACKAGE SIZE (uncompressed): 2250 K PACKAGE DESCRIPTION: e2fsprogs: e2fsprogs e2fsprogs: e2fsprogs: Utilities needed to create and maintain ext2 and ext3 filesystems. e2fsprogs: e2fsprogs: These utilities were written by Remy Card (the developer and e2fsprogs: maintainer of the ext2 fs) and Theodore T'so. e2fsprogs: PACKAGE NAME: ed-0.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: ed: ed (text editor) ed: ed: GNU ed is an 8-bit clean, more or less POSIX-compliant implementation ed: of the standard Unix line editor. These days, full-screen editors ed: have rendered 'ed' mostly of historical interest. Nonetheless, it ed: appeals to a handful of aging programmers who still believe that ed: "Small is Beautiful". ed: PACKAGE NAME: editres-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: editres: editres editres: editres: editres is part of X11. editres: editres: For more information about the X.Org Foundation (the providers of the editres: X.Org implementation of the X Window System), see their website: editres: editres: http://www.x.org editres: PACKAGE NAME: eject-2.1.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: eject: eject (a tool to eject removable media) eject: eject: Eject allows removable media (typically a DVD, CD, floppy disk, tape, eject: etc.) to be ejected under software control. The command can also eject: control some multi-disc changers, the auto-eject feature supported by eject: some devices, and can close the disc tray of some drives. eject: eject: The 'eject' program was written by Jeff Tranter. eject: PACKAGE NAME: elm-2.5.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 328 K PACKAGE SIZE (uncompressed): 840 K PACKAGE DESCRIPTION: elm: elm (Menu-driven user mail program) elm: elm: Elm is an interactive screen-oriented mailer program originally elm: written by Dave Taylor, and continued by the Elm Development Group. elm: PACKAGE NAME: elvis-2.2_0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 834 K PACKAGE SIZE (uncompressed): 2960 K PACKAGE DESCRIPTION: elvis: elvis elvis: elvis: Elvis is a text editor. It is intended to be a modern replacement elvis: for the classic ex/vi editor of UNIX fame. Elvis supports many new elvis: features, including multiple edit buffers, multiple windows, and a elvis: variety of display modes. elvis: elvis: As elvis is Slackware's default vi, this is a required package. elvis: PACKAGE NAME: emacs-22.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/e PACKAGE SIZE (compressed): 11603 K PACKAGE SIZE (uncompressed): 42100 K PACKAGE DESCRIPTION: emacs: emacs (GNU Emacs) emacs: emacs: Base binaries and support files for the GNU Emacs editor/environment. emacs: This version supports X. If you do not have X installed, you will emacs: also have to install the replacement Emacs binary that does not emacs: require the X11, Xaw3d, and Xt libraries. emacs: PACKAGE NAME: emacs-info-22.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/e PACKAGE SIZE (compressed): 3634 K PACKAGE SIZE (uncompressed): 3690 K PACKAGE DESCRIPTION: emacs-info: emacs-info (Info files for Emacs) emacs-info: emacs-info: These gzipped info files go in /usr/info, providing online emacs-info: documentation for Emacs. emacs-info: PACKAGE NAME: emacs-leim-22.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/e PACKAGE SIZE (compressed): 4135 K PACKAGE SIZE (uncompressed): 10850 K PACKAGE DESCRIPTION: emacs-leim: emacs-leim (Library of Emacs Input Method) emacs-leim: emacs-leim: The leim package for Emacs provides input methods for many languages emacs-leim: including Chinese, Tibetan, Vietnamese, Thai, Korean, and more. It emacs-leim: also provides improved handling of many non-US keyboard layouts. emacs-leim: PACKAGE NAME: emacs-lisp-22.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/e PACKAGE SIZE (compressed): 9265 K PACKAGE SIZE (uncompressed): 9960 K PACKAGE DESCRIPTION: emacs-lisp: emacs-lisp (GNU Emacs Lisp source files) emacs-lisp: emacs-lisp: This package contains source code for the parts of Emacs that are emacs-lisp: written in Emacs Lisp. *.el files are Emacs Lisp source, and the emacs-lisp: corresponding *.elc files are byte-compiled versions. emacs-lisp: emacs-lisp: The emacs-common package contains all of the *.el files that Emacs emacs-lisp: requires to run, but the rest of the *.el files included in the emacs-lisp: emacs-lisp package are probably good to have if you've got the space emacs-lisp: on your hard drive. Note that the *.el files included in the emacs-lisp: emacs-common package are not included as duplicates in emacs-lisp. PACKAGE NAME: emacs-misc-22.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/e PACKAGE SIZE (compressed): 2703 K PACKAGE SIZE (uncompressed): 7750 K PACKAGE DESCRIPTION: emacs-misc: emacs-misc (Miscellaneous files for Emacs) emacs-misc: emacs-misc: This package contains the architecture-independent files used by or emacs-misc: with Emacs. This includes various text files containing documentation emacs-misc: for GNU Emacs, or of interest to Emacs users. emacs-misc: PACKAGE NAME: emacs-nox-22.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/e PACKAGE SIZE (compressed): 2516 K PACKAGE SIZE (uncompressed): 10440 K PACKAGE DESCRIPTION: emacs-nox: emacs-nox (Emacs binary without X support) emacs-nox: emacs-nox: A replacement /usr/bin/emacs binary that is not compiled with X11 menu emacs-nox: support. This version of emacs is about 400K smaller than the full emacs-nox: version of emacs, and is the same in every respect except for X11 emacs-nox: extensions. It can still run in an xterm or rxvt if you wish to run emacs-nox: it under X, but it is mainly included for those folks who don't have X emacs-nox: (or the X11, Xaw3d, and Xt shared libs) installed on their machines. emacs-nox: You might want to remove the version that requires X if you install emacs-nox: and use this one. emacs-nox: PACKAGE NAME: encodings-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 566 K PACKAGE SIZE (uncompressed): 680 K PACKAGE DESCRIPTION: encodings: encodings encodings: encodings: encodings is part of X11. encodings: encodings: For more information about the X.Org Foundation (the providers of the encodings: X.Org implementation of the X Window System), see their website: encodings: encodings: http://www.x.org encodings: PACKAGE NAME: enscript-1.6.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 428 K PACKAGE SIZE (uncompressed): 1870 K PACKAGE DESCRIPTION: enscript: enscript (converts text files to PostScript and other formats) enscript: enscript: Enscript converts text files to PostScript and spools the generated enscript: output to a printer or saves it to a file. If no input files are enscript: given, enscript processes standard input. Enscript can be extended to enscript: handle different output media and it has many options for customizing enscript: printouts. enscript: PACKAGE NAME: epic4-2.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 780 K PACKAGE SIZE (uncompressed): 2880 K PACKAGE DESCRIPTION: epic4: epic4 (Internet Relay Chat client) epic4: epic4: EPIC is the (E)nhanced (P)rogrammable (I)RC-II (C)lient. epic4: epic4: The EPIC home page is: http://www.epicsol.org/ epic4: The EPIC main ftp site is: ftp://ftp.epicsol.org/ epic4: The EPIC IRC channel is: #epic on EFNet epic4: PACKAGE NAME: esound-0.2.38-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 121 K PACKAGE SIZE (uncompressed): 380 K PACKAGE DESCRIPTION: esound: esound (Enlightened Sound Daemon) esound: esound: EsounD, the Enlightened Sound Daemon, is a server process that mixes esound: several audio streams for playback by a single audio device. For esound: example, if you're listening to music on a CD and you receive a esound: sound-related event from ICQ, the two applications won't have to esound: jockey for the use of your sound card. Install esound if you'd like esound: to let sound applications share your audio device. esound: PACKAGE NAME: espgs-8.15.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 7235 K PACKAGE SIZE (uncompressed): 23730 K PACKAGE DESCRIPTION: espgs: espgs (ESP Ghostscript) espgs: espgs: ESP Ghostscript is a customized version of GNU Ghostscript, an espgs: interpreter of Adobe Systems' PostScript(tm) and Portable Document espgs: Format (PDF) languages. Ghostscript is an essential part of the espgs: printing subsystem, taking PostScript output from applications and espgs: converting it into an appropriate printer or display format. espgs: Ghostscript supports many printers directly, and more are supported espgs: through gimp-print and HPIJS, which are add-on packages that work espgs: with Ghostscript's IJS driver. espgs: PACKAGE NAME: etc-11.1-noarch_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 252 K PACKAGE SIZE (uncompressed): 820 K PACKAGE DESCRIPTION: etc: etc (system configuration files) etc: etc: System configuration files. The /etc directory is traditionally the etc: location where configuration files are found. etc: PACKAGE NAME: ethtool-5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 52 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: ethtool: ethtool (a tool for examining and tuning a network interface) ethtool: ethtool: ethtool is a small utility for examining and tuning your Ethernet ethtool: based network interface. For more details, see "man ethtool". ethtool: ethtool: ethtool was written by David Miller, with help from Jakub Jelinek, ethtool: Jeff Garzik, Tim Hockin, Eli Kupermann, Chris Leech, Scott Feldman, ethtool: and Andi Kleen. ethtool: PACKAGE NAME: evieext-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: evieext: evieext evieext: evieext: evieext is part of X11. evieext: evieext: For more information about the X.Org Foundation (the providers of the evieext: X.Org implementation of the X Window System), see their website: evieext: evieext: http://www.x.org evieext: PACKAGE NAME: expat-2.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 179 K PACKAGE SIZE (uncompressed): 570 K PACKAGE DESCRIPTION: expat: expat expat: expat: This is Expat, a C library for parsing XML, written by James Clark. expat: Expat is a stream-oriented XML parser used by Python, GNOME, Xft2, expat: and other things. expat: PACKAGE NAME: expat32-2.0.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 131 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: expat32: expat32 (32 binaries of expat) expat32: expat32: This is Expat, a C library for parsing XML, written by James Clark. expat32: Expat is a stream-oriented XML parser used by Python, GNOME, Xft2, expat32: and other things. expat32: expat32: This package contains 32-bit binaries. expat32: PACKAGE NAME: expect-5.43.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/tcl PACKAGE SIZE (compressed): 565 K PACKAGE SIZE (uncompressed): 1660 K PACKAGE DESCRIPTION: expect: expect expect: expect: Expect is a program that talks to other interactive programs according expect: to a script. Following the script, Expect knows what can be expected expect: from a program and what the correct response should be. An expect: interpreted language provides branching and high-level control expect: structures to direct the dialogue. expect: expect: Expect was written by Don Libes of the National Institute of Standards expect: and Technology. expect: PACKAGE NAME: fetchmail-6.3.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 735 K PACKAGE SIZE (uncompressed): 2040 K PACKAGE DESCRIPTION: fetchmail: fetchmail (mail retrieval and forwarding utility) fetchmail: fetchmail: fetchmail is a mail retrieval and forwarding utility. It fetches fetchmail: mail from a POP, IMAP, or ETRN-capable remote mailserver and forwards fetchmail: it to your local (client) machine's delivery system. You can then fetchmail: handle the retrieved mail using normal mail user agents such as elm, fetchmail: pine, or mutt. The fetchmail utility can be run in a daemon mode to fetchmail: repeatedly poll one or more systems at a specified interval. fetchmail: PACKAGE NAME: file-4.21-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 232 K PACKAGE SIZE (uncompressed): 740 K PACKAGE DESCRIPTION: file: file (a utility to determine file type) file: file: This is Ian F. Darwin's 'file' utility, used to identify files. file: Christos Zoulas has been file's maintainer since 1994. file: PACKAGE NAME: findutils-4.2.31-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 301 K PACKAGE SIZE (uncompressed): 860 K PACKAGE DESCRIPTION: findutils: findutils (utilities to locate files) findutils: findutils: This package contains the GNU find and xargs programs. The find and findutils: xargs implementations comply with POSIX 1003.2. They also support findutils: some additional options, some borrowed from Unix and some unique to findutils: GNU. findutils: PACKAGE NAME: fixesproto-4.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: fixesproto: fixesproto fixesproto: fixesproto: fixesproto is part of X11. fixesproto: fixesproto: For more information about the X.Org Foundation (the providers of the fixesproto: X.Org implementation of the X Window System), see their website: fixesproto: fixesproto: http://www.x.org fixesproto: PACKAGE NAME: flac-1.1.2-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 778 K PACKAGE SIZE (uncompressed): 3040 K PACKAGE DESCRIPTION: flac: flac (Free Lossless Audio Codec) flac: flac: FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, flac: FLAC is similar to MP3, but lossless. "Free" means that the flac: specification of the stream format is in the public domain, and that flac: neither the FLAC format nor any of the implemented encoding/decoding flac: methods are covered by any patent. It also means that the sources for flac: libFLAC and libFLAC++ are available under the LGPL and the sources for flac: flac, metaflac, and the plugins are available under the GPL. flac: flac: FLAC was developed by Josh Coalson. PACKAGE NAME: flex-2.5.33-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 303 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE DESCRIPTION: flex: flex (fast lexical analyzer generator) flex: flex: flex is a tool for generating programs that perform pattern matching flex: on text. flex is a rewrite of the AT&T Unix lex tool (the two flex: implementations do not share any code, though), with some extensions flex: (and incompatibilities). flex: PACKAGE NAME: floppy-5.4-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 319 K PACKAGE SIZE (uncompressed): 700 K PACKAGE DESCRIPTION: floppy: floppy (floppy disk utilities) floppy: floppy: Contains fdutils-5.4, tools to test and format floppy disks; and floppy: mtools-3.9.8, a collection of utilities for using DOS/Windows floppy floppy: disks with Linux. floppy: floppy: Actually, this package doesn't include mtools. Please tell me if you floppy: can get it working on amd64 :P floppy: PACKAGE NAME: fluxbox-1.0rc3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 931 K PACKAGE SIZE (uncompressed): 2680 K PACKAGE DESCRIPTION: fluxbox: fluxbox (Fluxbox window manager) fluxbox: fluxbox: Fluxbox is yet another windowmanager for X that is based on blackbox fluxbox: but with many new features. fluxbox: PACKAGE NAME: font-adobe-100dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6192 K PACKAGE SIZE (uncompressed): 7050 K PACKAGE DESCRIPTION: font-adobe-100dpi: font-adobe-100dpi font-adobe-100dpi: font-adobe-100dpi: font-adobe-100dpi is part of X11. font-adobe-100dpi: font-adobe-100dpi: For more information about the X.Org Foundation (the providers of the font-adobe-100dpi: X.Org implementation of the X Window System), see their website: font-adobe-100dpi: font-adobe-100dpi: http://www.x.org font-adobe-100dpi: PACKAGE NAME: font-adobe-75dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5494 K PACKAGE SIZE (uncompressed): 6350 K PACKAGE DESCRIPTION: font-adobe-75dpi: font-adobe-75dpi font-adobe-75dpi: font-adobe-75dpi: font-adobe-75dpi is part of X11. font-adobe-75dpi: font-adobe-75dpi: For more information about the X.Org Foundation (the providers of the font-adobe-75dpi: X.Org implementation of the X Window System), see their website: font-adobe-75dpi: font-adobe-75dpi: http://www.x.org font-adobe-75dpi: PACKAGE NAME: font-adobe-utopia-100dpi-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1450 K PACKAGE SIZE (uncompressed): 1640 K PACKAGE DESCRIPTION: font-adobe-utopia-100dpi: font-adobe-utopia-100dpi font-adobe-utopia-100dpi: font-adobe-utopia-100dpi: font-adobe-utopia-100dpi is part of X11. font-adobe-utopia-100dpi: font-adobe-utopia-100dpi: For more information about the X.Org Foundation (the providers of the font-adobe-utopia-100dpi: X.Org implementation of the X Window System), see their website: font-adobe-utopia-100dpi: font-adobe-utopia-100dpi: http://www.x.org font-adobe-utopia-100dpi: PACKAGE NAME: font-adobe-utopia-75dpi-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1204 K PACKAGE SIZE (uncompressed): 1390 K PACKAGE DESCRIPTION: font-adobe-utopia-75dpi: font-adobe-utopia-75dpi font-adobe-utopia-75dpi: font-adobe-utopia-75dpi: font-adobe-utopia-75dpi is part of X11. font-adobe-utopia-75dpi: font-adobe-utopia-75dpi: For more information about the X.Org Foundation (the providers of the font-adobe-utopia-75dpi: X.Org implementation of the X Window System), see their website: font-adobe-utopia-75dpi: font-adobe-utopia-75dpi: http://www.x.org font-adobe-utopia-75dpi: PACKAGE NAME: font-adobe-utopia-type1-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 193 K PACKAGE SIZE (uncompressed): 400 K PACKAGE DESCRIPTION: font-adobe-utopia-type1: font-adobe-utopia-type1 font-adobe-utopia-type1: font-adobe-utopia-type1: font-adobe-utopia-type1 is part of X11. font-adobe-utopia-type1: font-adobe-utopia-type1: For more information about the X.Org Foundation (the providers of the font-adobe-utopia-type1: X.Org implementation of the X Window System), see their website: font-adobe-utopia-type1: font-adobe-utopia-type1: http://www.x.org font-adobe-utopia-type1: PACKAGE NAME: font-alias-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: font-alias: font-alias font-alias: font-alias: font-alias is part of X11. font-alias: font-alias: For more information about the X.Org Foundation (the providers of the font-alias: X.Org implementation of the X Window System), see their website: font-alias: font-alias: http://www.x.org font-alias: PACKAGE NAME: font-arabic-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: font-arabic-misc: font-arabic-misc font-arabic-misc: font-arabic-misc: font-arabic-misc is part of X11. font-arabic-misc: font-arabic-misc: For more information about the X.Org Foundation (the providers of the font-arabic-misc: X.Org implementation of the X Window System), see their website: font-arabic-misc: font-arabic-misc: http://www.x.org font-arabic-misc: PACKAGE NAME: font-bh-100dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3755 K PACKAGE SIZE (uncompressed): 4250 K PACKAGE DESCRIPTION: font-bh-100dpi: font-bh-100dpi font-bh-100dpi: font-bh-100dpi: font-bh-100dpi is part of X11. font-bh-100dpi: font-bh-100dpi: For more information about the X.Org Foundation (the providers of the font-bh-100dpi: X.Org implementation of the X Window System), see their website: font-bh-100dpi: font-bh-100dpi: http://www.x.org font-bh-100dpi: PACKAGE NAME: font-bh-75dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3229 K PACKAGE SIZE (uncompressed): 3730 K PACKAGE DESCRIPTION: font-bh-75dpi: font-bh-75dpi font-bh-75dpi: font-bh-75dpi: font-bh-75dpi is part of X11. font-bh-75dpi: font-bh-75dpi: For more information about the X.Org Foundation (the providers of the font-bh-75dpi: X.Org implementation of the X Window System), see their website: font-bh-75dpi: font-bh-75dpi: http://www.x.org font-bh-75dpi: PACKAGE NAME: font-bh-lucidatypewriter-100dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 841 K PACKAGE SIZE (uncompressed): 980 K PACKAGE DESCRIPTION: font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi is part of X11. font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi: For more information about the X.Org Foundation (the providers of the font-bh-lucidatypewriter-100dpi: X.Org implementation of the X Window System), see their website: font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi: http://www.x.org font-bh-lucidatypewriter-100dpi: PACKAGE NAME: font-bh-lucidatypewriter-75dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 736 K PACKAGE SIZE (uncompressed): 870 K PACKAGE DESCRIPTION: font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi is part of X11. font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi: For more information about the X.Org Foundation (the providers of the font-bh-lucidatypewriter-75dpi: X.Org implementation of the X Window System), see their website: font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi: http://www.x.org font-bh-lucidatypewriter-75dpi: PACKAGE NAME: font-bh-ttf-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 415 K PACKAGE SIZE (uncompressed): 920 K PACKAGE DESCRIPTION: font-bh-ttf: font-bh-ttf font-bh-ttf: font-bh-ttf: font-bh-ttf is part of X11. font-bh-ttf: font-bh-ttf: For more information about the X.Org Foundation (the providers of the font-bh-ttf: X.Org implementation of the X Window System), see their website: font-bh-ttf: font-bh-ttf: http://www.x.org font-bh-ttf: PACKAGE NAME: font-bh-type1-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 640 K PACKAGE SIZE (uncompressed): 1310 K PACKAGE DESCRIPTION: font-bh-type1: font-bh-type1 font-bh-type1: font-bh-type1: font-bh-type1 is part of X11. font-bh-type1: font-bh-type1: For more information about the X.Org Foundation (the providers of the font-bh-type1: X.Org implementation of the X Window System), see their website: font-bh-type1: font-bh-type1: http://www.x.org font-bh-type1: PACKAGE NAME: font-bitstream-100dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 157 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: font-bitstream-100dpi: font-bitstream-100dpi font-bitstream-100dpi: font-bitstream-100dpi: font-bitstream-100dpi is part of X11. font-bitstream-100dpi: font-bitstream-100dpi: For more information about the X.Org Foundation (the providers of the font-bitstream-100dpi: X.Org implementation of the X Window System), see their website: font-bitstream-100dpi: font-bitstream-100dpi: http://www.x.org font-bitstream-100dpi: PACKAGE NAME: font-bitstream-75dpi-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 137 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: font-bitstream-75dpi: font-bitstream-75dpi font-bitstream-75dpi: font-bitstream-75dpi: font-bitstream-75dpi is part of X11. font-bitstream-75dpi: font-bitstream-75dpi: For more information about the X.Org Foundation (the providers of the font-bitstream-75dpi: X.Org implementation of the X Window System), see their website: font-bitstream-75dpi: font-bitstream-75dpi: http://www.x.org font-bitstream-75dpi: PACKAGE NAME: font-bitstream-speedo-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 358 K PACKAGE SIZE (uncompressed): 550 K PACKAGE DESCRIPTION: font-bitstream-speedo: font-bitstream-speedo font-bitstream-speedo: font-bitstream-speedo: font-bitstream-speedo is part of X11. font-bitstream-speedo: font-bitstream-speedo: For more information about the X.Org Foundation (the providers of the font-bitstream-speedo: X.Org implementation of the X Window System), see their website: font-bitstream-speedo: font-bitstream-speedo: http://www.x.org font-bitstream-speedo: PACKAGE NAME: font-bitstream-type1-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 322 K PACKAGE SIZE (uncompressed): 460 K PACKAGE DESCRIPTION: font-bitstream-type1: font-bitstream-type1 font-bitstream-type1: font-bitstream-type1: font-bitstream-type1 is part of X11. font-bitstream-type1: font-bitstream-type1: For more information about the X.Org Foundation (the providers of the font-bitstream-type1: X.Org implementation of the X Window System), see their website: font-bitstream-type1: font-bitstream-type1: http://www.x.org font-bitstream-type1: PACKAGE NAME: font-cronyx-cyrillic-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 295 K PACKAGE SIZE (uncompressed): 360 K PACKAGE DESCRIPTION: font-cronyx-cyrillic: font-cronyx-cyrillic font-cronyx-cyrillic: font-cronyx-cyrillic: font-cronyx-cyrillic is part of X11. font-cronyx-cyrillic: font-cronyx-cyrillic: For more information about the X.Org Foundation (the providers of the font-cronyx-cyrillic: X.Org implementation of the X Window System), see their website: font-cronyx-cyrillic: font-cronyx-cyrillic: http://www.x.org font-cronyx-cyrillic: PACKAGE NAME: font-cursor-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: font-cursor-misc: font-cursor-misc font-cursor-misc: font-cursor-misc: font-cursor-misc is part of X11. font-cursor-misc: font-cursor-misc: For more information about the X.Org Foundation (the providers of the font-cursor-misc: X.Org implementation of the X Window System), see their website: font-cursor-misc: font-cursor-misc: http://www.x.org font-cursor-misc: PACKAGE NAME: font-daewoo-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 662 K PACKAGE SIZE (uncompressed): 830 K PACKAGE DESCRIPTION: font-daewoo-misc: font-daewoo-misc font-daewoo-misc: font-daewoo-misc: font-daewoo-misc is part of X11. font-daewoo-misc: font-daewoo-misc: For more information about the X.Org Foundation (the providers of the font-daewoo-misc: X.Org implementation of the X Window System), see their website: font-daewoo-misc: font-daewoo-misc: http://www.x.org font-daewoo-misc: PACKAGE NAME: font-dec-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: font-dec-misc: font-dec-misc font-dec-misc: font-dec-misc: font-dec-misc is part of X11. font-dec-misc: font-dec-misc: For more information about the X.Org Foundation (the providers of the font-dec-misc: X.Org implementation of the X Window System), see their website: font-dec-misc: font-dec-misc: http://www.x.org font-dec-misc: PACKAGE NAME: font-ibm-type1-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 306 K PACKAGE SIZE (uncompressed): 630 K PACKAGE DESCRIPTION: font-ibm-type1: font-ibm-type1 font-ibm-type1: font-ibm-type1: font-ibm-type1 is part of X11. font-ibm-type1: font-ibm-type1: For more information about the X.Org Foundation (the providers of the font-ibm-type1: X.Org implementation of the X Window System), see their website: font-ibm-type1: font-ibm-type1: http://www.x.org font-ibm-type1: PACKAGE NAME: font-isas-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 788 K PACKAGE SIZE (uncompressed): 940 K PACKAGE DESCRIPTION: font-isas-misc: font-isas-misc font-isas-misc: font-isas-misc: font-isas-misc is part of X11. font-isas-misc: font-isas-misc: For more information about the X.Org Foundation (the providers of the font-isas-misc: X.Org implementation of the X Window System), see their website: font-isas-misc: font-isas-misc: http://www.x.org font-isas-misc: PACKAGE NAME: font-jis-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 527 K PACKAGE SIZE (uncompressed): 620 K PACKAGE DESCRIPTION: font-jis-misc: font-jis-misc font-jis-misc: font-jis-misc: font-jis-misc is part of X11. font-jis-misc: font-jis-misc: For more information about the X.Org Foundation (the providers of the font-jis-misc: X.Org implementation of the X Window System), see their website: font-jis-misc: font-jis-misc: http://www.x.org font-jis-misc: PACKAGE NAME: font-micro-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: font-micro-misc: font-micro-misc font-micro-misc: font-micro-misc: font-micro-misc is part of X11. font-micro-misc: font-micro-misc: For more information about the X.Org Foundation (the providers of the font-micro-misc: X.Org implementation of the X Window System), see their website: font-micro-misc: font-micro-misc: http://www.x.org font-micro-misc: PACKAGE NAME: font-misc-cyrillic-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 65 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: font-misc-cyrillic: font-misc-cyrillic font-misc-cyrillic: font-misc-cyrillic: font-misc-cyrillic is part of X11. font-misc-cyrillic: font-misc-cyrillic: For more information about the X.Org Foundation (the providers of the font-misc-cyrillic: X.Org implementation of the X Window System), see their website: font-misc-cyrillic: font-misc-cyrillic: http://www.x.org font-misc-cyrillic: PACKAGE NAME: font-misc-ethiopic-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 147 K PACKAGE SIZE (uncompressed): 440 K PACKAGE DESCRIPTION: font-misc-ethiopic: font-misc-ethiopic font-misc-ethiopic: font-misc-ethiopic: font-misc-ethiopic is part of X11. font-misc-ethiopic: font-misc-ethiopic: For more information about the X.Org Foundation (the providers of the font-misc-ethiopic: X.Org implementation of the X Window System), see their website: font-misc-ethiopic: font-misc-ethiopic: http://www.x.org font-misc-ethiopic: PACKAGE NAME: font-misc-meltho-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1810 K PACKAGE SIZE (uncompressed): 5670 K PACKAGE DESCRIPTION: font-misc-meltho: font-misc-meltho font-misc-meltho: font-misc-meltho: font-misc-meltho is part of X11. font-misc-meltho: font-misc-meltho: For more information about the X.Org Foundation (the providers of the font-misc-meltho: X.Org implementation of the X Window System), see their website: font-misc-meltho: font-misc-meltho: http://www.x.org font-misc-meltho: PACKAGE NAME: font-misc-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3562 K PACKAGE SIZE (uncompressed): 4380 K PACKAGE DESCRIPTION: font-misc-misc: font-misc-misc font-misc-misc: font-misc-misc: font-misc-misc is part of X11. font-misc-misc: font-misc-misc: For more information about the X.Org Foundation (the providers of the font-misc-misc: X.Org implementation of the X Window System), see their website: font-misc-misc: font-misc-misc: http://www.x.org font-misc-misc: PACKAGE NAME: font-mutt-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 206 K PACKAGE SIZE (uncompressed): 250 K PACKAGE DESCRIPTION: font-mutt-misc: font-mutt-misc font-mutt-misc: font-mutt-misc: font-mutt-misc is part of X11. font-mutt-misc: font-mutt-misc: For more information about the X.Org Foundation (the providers of the font-mutt-misc: X.Org implementation of the X Window System), see their website: font-mutt-misc: font-mutt-misc: http://www.x.org font-mutt-misc: PACKAGE NAME: font-schumacher-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 154 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: font-schumacher-misc: font-schumacher-misc font-schumacher-misc: font-schumacher-misc: font-schumacher-misc is part of X11. font-schumacher-misc: font-schumacher-misc: For more information about the X.Org Foundation (the providers of the font-schumacher-misc: X.Org implementation of the X Window System), see their website: font-schumacher-misc: font-schumacher-misc: http://www.x.org font-schumacher-misc: PACKAGE NAME: font-screen-cyrillic-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: font-screen-cyrillic: font-screen-cyrillic font-screen-cyrillic: font-screen-cyrillic: font-screen-cyrillic is part of X11. font-screen-cyrillic: font-screen-cyrillic: For more information about the X.Org Foundation (the providers of the font-screen-cyrillic: X.Org implementation of the X Window System), see their website: font-screen-cyrillic: font-screen-cyrillic: http://www.x.org font-screen-cyrillic: PACKAGE NAME: font-sony-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: font-sony-misc: font-sony-misc font-sony-misc: font-sony-misc: font-sony-misc is part of X11. font-sony-misc: font-sony-misc: For more information about the X.Org Foundation (the providers of the font-sony-misc: X.Org implementation of the X Window System), see their website: font-sony-misc: font-sony-misc: http://www.x.org font-sony-misc: PACKAGE NAME: font-sun-misc-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: font-sun-misc: font-sun-misc font-sun-misc: font-sun-misc: font-sun-misc is part of X11. font-sun-misc: font-sun-misc: For more information about the X.Org Foundation (the providers of the font-sun-misc: X.Org implementation of the X Window System), see their website: font-sun-misc: font-sun-misc: http://www.x.org font-sun-misc: PACKAGE NAME: font-util-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 230 K PACKAGE DESCRIPTION: font-util: font-util font-util: font-util: font-util is part of X11. font-util: font-util: For more information about the X.Org Foundation (the providers of the font-util: X.Org implementation of the X Window System), see their website: font-util: font-util: http://www.x.org font-util: PACKAGE NAME: font-winitzki-cyrillic-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: font-winitzki-cyrillic: font-winitzki-cyrillic font-winitzki-cyrillic: font-winitzki-cyrillic: font-winitzki-cyrillic is part of X11. font-winitzki-cyrillic: font-winitzki-cyrillic: For more information about the X.Org Foundation (the providers of the font-winitzki-cyrillic: X.Org implementation of the X Window System), see their website: font-winitzki-cyrillic: font-winitzki-cyrillic: http://www.x.org font-winitzki-cyrillic: PACKAGE NAME: font-xfree86-type1-1.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: font-xfree86-type1: font-xfree86-type1 font-xfree86-type1: font-xfree86-type1: font-xfree86-type1 is part of X11. font-xfree86-type1: font-xfree86-type1: For more information about the X.Org Foundation (the providers of the font-xfree86-type1: X.Org implementation of the X Window System), see their website: font-xfree86-type1: font-xfree86-type1: http://www.x.org font-xfree86-type1: PACKAGE NAME: fontcacheproto-0.1.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: fontcacheproto: fontcacheproto fontcacheproto: fontcacheproto: fontcacheproto is part of X11. fontcacheproto: fontcacheproto: For more information about the X.Org Foundation (the providers of the fontcacheproto: X.Org implementation of the X Window System), see their website: fontcacheproto: fontcacheproto: http://www.x.org fontcacheproto: PACKAGE NAME: fontconfig-2.4.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 326 K PACKAGE SIZE (uncompressed): 920 K PACKAGE DESCRIPTION: fontconfig: fontconfig (Font library and tools) fontconfig: fontconfig: Fontconfig is a library and tools designed to provide system-wide fontconfig: font configuration, customization, and application access. fontconfig: fontconfig: Fontconfig is written and maintained by Keith Packard. fontconfig: PACKAGE NAME: fontsproto-2.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: fontsproto: fontsproto fontsproto: fontsproto: fontsproto is part of X11. fontsproto: fontsproto: For more information about the X.Org Foundation (the providers of the fontsproto: X.Org implementation of the X Window System), see their website: fontsproto: fontsproto: http://www.x.org fontsproto: PACKAGE NAME: fonttosfnt-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: fonttosfnt: fonttosfnt fonttosfnt: fonttosfnt: fonttosfnt is part of X11. fonttosfnt: fonttosfnt: For more information about the X.Org Foundation (the providers of the fonttosfnt: X.Org implementation of the X Window System), see their website: fonttosfnt: fonttosfnt: http://www.x.org fonttosfnt: PACKAGE NAME: freetype-2.3.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 453 K PACKAGE SIZE (uncompressed): 1700 K PACKAGE DESCRIPTION: freetype: freetype (A Free, High-Quality, and Portable Font Engine) freetype: freetype: The FreeType engine is a free and portable TrueType font rendering freetype: engine. It has been developed to provide TrueType support to a freetype: great variety of platforms and environments. freetype: PACKAGE NAME: fribidi-0.10.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 68 K PACKAGE SIZE (uncompressed): 280 K PACKAGE DESCRIPTION: fribidi: fribidi (Unicode BiDirectional algorithm library) fribidi: fribidi: This library implements the Unicode BiDirectional algorithm which is fribidi: needed in order to support for left-to-right languages such as Arabic fribidi: and Hebrew. It is used in word processing and display software like fribidi: AbiWord and KDE's SVG module. fribidi: PACKAGE NAME: fslsfonts-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: fslsfonts: fslsfonts fslsfonts: fslsfonts: fslsfonts is part of X11. fslsfonts: fslsfonts: For more information about the X.Org Foundation (the providers of the fslsfonts: X.Org implementation of the X Window System), see their website: fslsfonts: fslsfonts: http://www.x.org fslsfonts: PACKAGE NAME: fstobdf-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: fstobdf: fstobdf fstobdf: fstobdf: fstobdf is part of X11. fstobdf: fstobdf: For more information about the X.Org Foundation (the providers of the fstobdf: X.Org implementation of the X Window System), see their website: fstobdf: fstobdf: http://www.x.org fstobdf: PACKAGE NAME: fvwm-2.4.20-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1560 K PACKAGE SIZE (uncompressed): 3700 K PACKAGE DESCRIPTION: fvwm: fvwm (a small and fast virtual window manager for X) fvwm: fvwm: Fvwm is the classic highly-configurable virtual window manager for fvwm: X11. It is a derivative of twm, redesigned to minimize memory fvwm: consumption, provide a 3-D look to window frames, and provide a simple fvwm: virtual desktop. fvwm: PACKAGE NAME: gamin-0.1.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 126 K PACKAGE SIZE (uncompressed): 420 K PACKAGE DESCRIPTION: gamin: gamin (A minimalist FAM replacement) gamin: gamin: Gamin is a file and directory monitoring system defined to be a subset gamin: of the FAM (File Alteration Monitor) system. gamin: gamin: The homepage for Gamin is: http://www.gnome.org/~veillard/gamin/ gamin: PACKAGE NAME: gawk-3.1.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 998 K PACKAGE SIZE (uncompressed): 2000 K PACKAGE DESCRIPTION: gawk: gawk (pattern scanning and processing language) gawk: gawk: Gawk is the GNU Project's implementation of the AWK programming gawk: language. It conforms to the definition of the language in the POSIX gawk: 1003.2 Command Language And Utilities Standard. This version in turn gawk: is based on the description in The AWK Programming Language, by Aho, gawk: Kernighan, and Weinberger, with the additional features found in the gawk: System V Release 4 version of UNIX awk. Gawk also provides more gawk: recent Bell Labs awk extensions, and some GNU-specific extensions. gawk: PACKAGE NAME: gcc-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 6128 K PACKAGE SIZE (uncompressed): 15540 K PACKAGE DESCRIPTION: gcc: gcc (Base GCC package with C support) gcc: gcc: GCC is the GNU Compiler Collection. gcc: gcc: This package contains those parts of the compiler collection needed to gcc: compile C code. Other packages add C++, Fortran, Objective-C, and gcc: Java support to the compiler core. gcc: PACKAGE NAME: gcc-g++-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 11748 K PACKAGE SIZE (uncompressed): 81860 K PACKAGE DESCRIPTION: gcc-g++: gcc-g++ (C++ for GCC) gcc-g++: gcc-g++: C++ support for the GNU Compiler Collection. gcc-g++: gcc-g++: This package contains those parts of the compiler collection needed to gcc-g++: compile C++ code. The base gcc package is also required. gcc-g++: PACKAGE NAME: gcc-gfortran-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 3038 K PACKAGE SIZE (uncompressed): 8220 K PACKAGE DESCRIPTION: gcc-gfortran: gcc-gfortran (Fortran support for GCC) gcc-gfortran: gcc-gfortran: This package contains those parts of the compiler collection gcc-gfortran: needed to compile Fortran code. The base gcc package is also gcc-gfortran: required. gcc-gfortran: gcc-gfortran: Its primary base is the ANSI FORTRAN 95 standard, with some gcc-gfortran: some extensions popularized by the 'f77' and 'f2c' compilers, gcc-gfortran: other compilers (such as Digital products), and the Fortran 90 gcc-gfortran: standard. gcc-gfortran: PACKAGE NAME: gcc-gnat-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 12037 K PACKAGE SIZE (uncompressed): 38880 K PACKAGE DESCRIPTION: gcc-gnat: gcc-gnat (Ada support for GCC) gcc-gnat: gcc-gnat: Ada 95 support for the GNU Compiler Collection. gcc-gnat: gcc-gnat: This package contains those parts of the compiler collection needed to gcc-gnat: compile Ada 95 code. Ada95 is the object oriented successor to the gcc-gnat: Ada83 language. The base gcc package is also required. gcc-gnat: PACKAGE NAME: gcc-java-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 24536 K PACKAGE SIZE (uncompressed): 94250 K PACKAGE DESCRIPTION: gcc-java: gcc-java (Java support for GCC) gcc-java: gcc-java: Java support for the GNU Compiler Collection. gcc-java: gcc-java: This package contains those parts of the compiler collection needed to gcc-java: compile programs written in the Java programming language. The base gcc-java: gcc package is also required. gcc-java: PACKAGE NAME: gcc-objc-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 2343 K PACKAGE SIZE (uncompressed): 5440 K PACKAGE DESCRIPTION: gcc-objc: gcc-objc (Objective-C support for GCC) gcc-objc: gcc-objc: Objective-C support for the GNU Compiler Collection. gcc-objc: gcc-objc: This package contains those parts of the compiler collection needed to gcc-objc: compile code written in Objective-C. Objective-C was originally gcc-objc: developed to add object-oriented extensions to the C language, and is gcc-objc: best known as the native language of the NeXT computer. gcc-objc: gcc-objc: The base gcc package is also required. gcc-objc: PACKAGE NAME: gcc32-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 214 K PACKAGE SIZE (uncompressed): 780 K PACKAGE DESCRIPTION: gcc32: gcc32 (Base 32-bit GCC package with C support) gcc32: gcc32: GCC is the GNU Compiler Collection. gcc32: gcc32: This package contains those parts of the compiler collection needed to gcc32: compile C code. Other packages add C++, Fortran, Objective-C, and gcc32: Java support to the compiler core. gcc32: gcc32: This package contains additional files for 32-bit target support, but gcc32: depends on the gcc package. gcc32: PACKAGE NAME: gcc32-g++-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 750 K PACKAGE SIZE (uncompressed): 3070 K PACKAGE DESCRIPTION: gcc32-g++: gcc32-g++ (C++ for GCC32) gcc32-g++: gcc32-g++: C++ support for the GNU Compiler Collection. gcc32-g++: gcc32-g++: This package contains those parts of the compiler collection needed to gcc32-g++: compile C++ code. The base gcc package is also required, as are gcc32-g++: gcc-g++ and gcc32. gcc32-g++: PACKAGE NAME: gcc32-gfortran-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 354 K PACKAGE SIZE (uncompressed): 1460 K PACKAGE DESCRIPTION: gcc32-gfortran: gcc32-gfortran (Fortran support for GCC32) gcc32-gfortran: gcc32-gfortran: This package contains those parts of the compiler collection gcc32-gfortran: needed to compile Fortran code. The base gcc package is also gcc32-gfortran: required, as are gcc32 and gcc-gfortran. gcc32-gfortran: gcc32-gfortran: Its primary base is the ANSI FORTRAN 95 standard, with some gcc32-gfortran: some extensions popularized by the 'f77' and 'f2c' compilers, gcc32-gfortran: other compilers (such as Digital products), and the Fortran 90 gcc32-gfortran: standard. gcc32-gfortran: PACKAGE NAME: gcc32-java-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 14344 K PACKAGE SIZE (uncompressed): 54020 K PACKAGE DESCRIPTION: gcc32-java: gcc32-java (Java support for GCC32) gcc32-java: gcc32-java: Java support for the GNU Compiler Collection. gcc32-java: gcc32-java: This package contains those parts of the compiler collection needed to gcc32-java: compile programs written in the Java programming language. The base gcc32-java: gcc package is also required, as are gcc-java and gcc32. gcc32-java: PACKAGE NAME: gcc32-objc-4.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 89 K PACKAGE SIZE (uncompressed): 260 K PACKAGE DESCRIPTION: gcc32-objc: gcc32-objc (Objective-C support for GCC32) gcc32-objc: gcc32-objc: Objective-C support for the GNU Compiler Collection. gcc32-objc: gcc32-objc: This package contains those parts of the compiler collection needed to gcc32-objc: compile code written in Objective-C. Objective-C was originally gcc32-objc: developed to add object-oriented extensions to the C language, and is gcc32-objc: best known as the native language of the NeXT computer. gcc32-objc: gcc32-objc: The base gcc package is also required, as are gcc-objc and gcc32. gcc32-objc: PACKAGE NAME: gccmakedep-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 10 K PACKAGE DESCRIPTION: gccmakedep: gccmakedep gccmakedep: gccmakedep: gccmakedep is part of X11. gccmakedep: gccmakedep: For more information about the X.Org Foundation (the providers of the gccmakedep: X.Org implementation of the X Window System), see their website: gccmakedep: gccmakedep: http://www.x.org gccmakedep: PACKAGE NAME: gd-2.0.35-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 172 K PACKAGE SIZE (uncompressed): 700 K PACKAGE DESCRIPTION: gd: gd (a graphics library) gd: gd: gd is a graphics library. It allows your code to quickly draw images gd: complete with lines, arcs, text, multiple colors, cut and paste from gd: other images, and flood fills, and write out the result as a PNG or gd: JPEG file. This is particularly useful in web applications, where gd: PNG and JPEG are two of the formats accepted for inline images by gd: most browsers. gd: gd: The gd library was written by Thomas Boutell. gd: PACKAGE NAME: gdb-6.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 1788 K PACKAGE SIZE (uncompressed): 3680 K PACKAGE DESCRIPTION: gdb: gdb (the GNU symbolic debugger) gdb: gdb: GDB, the GNU Project debugger, allows you to see what is going on gdb: inside another program while it executes -- or what another program gdb: was doing at the moment it crashed. GDB can do four main kinds of gdb: things to help you catch bugs in the act: 1) Start your program, gdb: specifying anything that might affect its behavior. 2) Make your gdb: program stop on specified conditions. 3) Examine what has happened, gdb: when your program has stopped. 4) Change things in your program, so gdb: you can experiment with correcting the effects of one bug and go on gdb: to learn about another. The program being debugged can be written in gdb: Ada, C, C++, Objective-C, Pascal and many other languages. PACKAGE NAME: gdbm-1.8.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 52 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: gdbm: gdbm (GNU database routines) gdbm: gdbm: GNU dbm is a set of database routines that work similar to the gdbm: standard UNIX dbm routines. gdbm: PACKAGE NAME: genpower-1.0.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: genpower: genpower (UPS monitoring daemon) genpower: genpower: The genpower daemon, genpowerd, will monitor the status of a serial genpower: line connected to a UPS (Uninterruptible Power Supply). If a power genpower: failure is detected, genpowerd will notify the system to take the genpower: needed steps to react to the condition of the UPS. This may include genpower: shutting the system down, or canceling a pending shutdown if the genpower: power is restored. genpower: PACKAGE NAME: getmail-4.7.4-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 192 K PACKAGE SIZE (uncompressed): 830 K PACKAGE DESCRIPTION: getmail: getmail (POP3 mail retriever) getmail: getmail: getmail is a POP3 mail retriever, with support for both ordinary and getmail: domain (or multidrop) POP3 mailboxes. It is written in Python, and getmail: licensed under the GNU General Public License version 2. getmail: getmail: getmail was written by Charles Cazabon. getmail: PACKAGE NAME: gettext-0.16.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 137 K PACKAGE SIZE (uncompressed): 760 K PACKAGE DESCRIPTION: gettext: gettext gettext: gettext: The GNU gettext package contains "gettext" and "ngettext", programs gettext: that are used to internationalize the messages given by shell scripts. gettext: PACKAGE NAME: gettext-tools-0.16.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 2583 K PACKAGE SIZE (uncompressed): 6970 K PACKAGE DESCRIPTION: gettext-tools: gettext-tools gettext-tools: gettext-tools: The GNU gettext-tools package is useful for authors and maintainers of gettext-tools: internationalized software, or for anyone compiling programs that gettext-tools: use the gettext functions. This package provides the needed tools and gettext-tools: library functions for the handling of messages in different languages. gettext-tools: Some other GNU packages use the gettext program (included in this gettext-tools: package) to internationalize the messages given by shell scripts. gettext-tools: PACKAGE NAME: getty-ps-2.1.0b-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 84 K PACKAGE SIZE (uncompressed): 220 K PACKAGE DESCRIPTION: getty-ps: getty-ps getty-ps: getty-ps: /sbin/getty and /sbin/uugetty. getty-ps: These control the process of logging into your system, and may be used getty-ps: instead of 'agetty', which is the default getty included with the getty-ps: util-linux package. getty-ps supports a number of enhancements such as getty-ps: ringback support. getty-ps: getty-ps: getty-ps was originally written by Paul Sutcliffe, Jr, and is getty-ps: currently maintained by Christine Jamison. getty-ps: PACKAGE NAME: gftp-2.0.18-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1002 K PACKAGE SIZE (uncompressed): 2920 K PACKAGE DESCRIPTION: gftp: gftp gftp: gftp: gFTP is a multithreaded FTP client for X written using GTK+. It gftp: features simultaneous downloads, resuming of interrupted file gftp: transfers, file transfer queues, downloading of entire directories, gftp: ftp proxy support, remote directory caching, passive and non-passive gftp: file transfers, drag-n-drop support, bookmarks menu, stop button, gftp: and many more features. gftp: PACKAGE NAME: ghostscript-fonts-std-8.11-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 3655 K PACKAGE SIZE (uncompressed): 4830 K PACKAGE DESCRIPTION: ghostscript-fonts-std: ghostscript-fonts-std (fonts for the Ghostscript interpreter) ghostscript-fonts-std: ghostscript-fonts-std: These fonts are used by the GhostScript interpreter. ghostscript-fonts-std: PACKAGE NAME: gimp-2.2.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 11063 K PACKAGE SIZE (uncompressed): 32870 K PACKAGE DESCRIPTION: gimp: gimp (The GNU Image Manipulation Program) gimp: gimp: The GIMP is a powerful tool for the preparation and manipulation of gimp: digital images. The GIMP provides the user with a wide variety of gimp: image manipulation, painting, processing, and rendering tools. The gimp: GIMP's open design and extensible architecture make for a very gimp: powerful end product for photo and image retouching, web graphics gimp: design, or digital illustration. gimp: PACKAGE NAME: gimp-help-2-0.8-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 17190 K PACKAGE SIZE (uncompressed): 28080 K PACKAGE DESCRIPTION: gimp-help-2: gimp-help-2 (documentation for GIMP) gimp-help-2: gimp-help-2: This package contains documentation for the GIMP image editor's gimp-help-2: built-in help system. gimp-help-2: PACKAGE NAME: gimp-print-4.2.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 2311 K PACKAGE SIZE (uncompressed): 3590 K PACKAGE DESCRIPTION: gimp-print: gimp-print (IJS printer driver for Ghostscript and CUPS) gimp-print: gimp-print: Gimp-Print is the print facility for the Gimp, and in addition a suite gimp-print: of drivers that may be used with common UNIX spooling systems using gimp-print: Ghostscript or CUPS. These drivers provide printing quality for Linux gimp-print: in many cases equal to or better than proprietary vendor-supplied gimp-print: drivers, and can be used for many of the most demanding printing gimp-print: tasks. gimp-print: PACKAGE NAME: git-1.5.2.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 4328 K PACKAGE SIZE (uncompressed): 9440 K PACKAGE DESCRIPTION: git: git (the stupid content tracker) git: git: Git is a fast, scalable, distributed revision control system with an git: unusually rich command set that provides both high-level operations git: and full access to internals. git: git: "git" can mean anything, depending on your mood. git: git: Git was originally written by Linus Torvalds and is currently git: maintained by Junio C. Hamano. git: PACKAGE NAME: gkrellm-2.2.10-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 811 K PACKAGE SIZE (uncompressed): 2060 K PACKAGE DESCRIPTION: gkrellm: gkrellm (GNU Krell Monitors) gkrellm: gkrellm: GKrellM charts SMP CPU, load, Disk, and all active net interfaces gkrellm: automatically. An on/off button and online timer for the PPP interface gkrellm: is provided. Monitors for memory and swap usage, file system, internet gkrellm: connections, APM laptop battery, mbox style mailboxes, and cpu temps. gkrellm: Also includes an uptime monitor, hostname label, and clock/calendar. gkrellm: gkrellm: Bill Wilson is the author of GKrellM. gkrellm: PACKAGE NAME: glib-1.2.10-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 231 K PACKAGE SIZE (uncompressed): 750 K PACKAGE DESCRIPTION: glib: glib (library of C routines) glib: glib: GLib is a library which includes support routines for C such as lists, glib: trees, hashes, memory allocation, and many other things. glib: glib: GLib is required by nearly everything that uses GTK+. glib: PACKAGE NAME: glib2-2.12.12-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 1472 K PACKAGE SIZE (uncompressed): 8820 K PACKAGE DESCRIPTION: glib2: glib2 (library of C routines) glib2: glib2: GLib is a library which includes support routines for C such as lists, glib2: trees, hashes, memory allocation, and many other things. glib2: PACKAGE NAME: glib2-32-2.12.12-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 323 K PACKAGE SIZE (uncompressed): 870 K PACKAGE DESCRIPTION: glib2-32: glib2-32 (library of C routines) glib2-32: glib2-32: GLib is a library which includes support routines for C such as lists, glib2-32: trees, hashes, memory allocation, and many other things. glib2-32: glib2-32: This package contains 32-bit binaries. glib2-32: PACKAGE NAME: glibc-2.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 23533 K PACKAGE SIZE (uncompressed): 90680 K PACKAGE DESCRIPTION: glibc: glibc (GNU C libraries) glibc: glibc: This package contains the GNU C libraries and header files. The GNU glibc: C library was written originally by Roland McGrath, and is currently glibc: maintained by Ulrich Drepper. Some parts of the library were glibc: contributed or worked on by other people. glibc: glibc: You'll need this package to compile programs. glibc: PACKAGE NAME: glibc-i18n-2.5-noarch_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 15563 K PACKAGE SIZE (uncompressed): 66270 K PACKAGE DESCRIPTION: glibc-i18n: glibc-i18n (locale files from glibc) glibc-i18n: glibc-i18n: These files go in /usr/lib/locale and /usr/share/i18n/ to provide glibc-i18n: internationalization support. You'll need this package unless you glibc-i18n: will be using US English only. glibc-i18n: PACKAGE NAME: glibc-profile-2.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 1492 K PACKAGE SIZE (uncompressed): 6630 K PACKAGE DESCRIPTION: glibc-profile: glibc-profile (GNU C libraries with profiling support) glibc-profile: glibc-profile: This package contains static versions of the GNU C libraries with glibc-profile: support for profiling binaries using gprof. gprof calculates how glibc-profile: much time a program spends in each routine which can suggest where glibc-profile: to concentrate efforts to improve performance. glibc-profile: glibc-profile: See the gprof man page for more details. glibc-profile: PACKAGE NAME: glibc-solibs-2.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 4222 K PACKAGE SIZE (uncompressed): 10540 K PACKAGE DESCRIPTION: glibc-solibs: glibc-solibs (shared GNU C libraries) glibc-solibs: glibc-solibs: This package contains the shared libraries, binaries, and support glibc-solibs: files required to run most Linux applications linked with glibc. glibc-solibs: PACKAGE NAME: glibc-zoneinfo-2.5-noarch_slamd64-5.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 505 K PACKAGE SIZE (uncompressed): 3010 K PACKAGE DESCRIPTION: glibc-zoneinfo: glibc-zoneinfo (time zone database) glibc-zoneinfo: glibc-zoneinfo: This package allows you to configure your time zone. glibc-zoneinfo: glibc-zoneinfo: This database comes from glibc, and is based on the tzdata package by glibc-zoneinfo: Arthur David Olson et.al. The latest version and more information glibc-zoneinfo: may be found at ftp://elsie.nci.nih.gov/pub/ glibc-zoneinfo: glibc-zoneinfo: Use the timeconfig utility to set your local time zone. glibc-zoneinfo: PACKAGE NAME: glibc32-2.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 13238 K PACKAGE SIZE (uncompressed): 40590 K PACKAGE DESCRIPTION: glibc32: glibc32 (32-bit support files for glibc) glibc32: glibc32: This package contains 32-bit glibc .so files and glibc32: include files required for use of 32-bit programs glibc32: in multilib distributions. glibc32: glibc32: This package is required to compile gcc. glibc32: PACKAGE NAME: glibc32-i18n-2.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 11593 K PACKAGE SIZE (uncompressed): 56550 K PACKAGE DESCRIPTION: glibc32-i18n: glibc32-i18n (32-bit Internationalisation Support) glibc32-i18n: glibc32-i18n: If you want to use languages other than US English glibc32-i18n: with 32-bit programs, you'll need this package. glibc32-i18n: glibc32-i18n: glibc32-i18n: glibc32-i18n: PACKAGE NAME: glproto-1.4.8-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: glproto: glproto glproto: glproto: glproto is part of X11. glproto: glproto: For more information about the X.Org Foundation (the providers of the glproto: X.Org implementation of the X Window System), see their website: glproto: glproto: http://www.x.org glproto: PACKAGE NAME: gmime-2.2.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 446 K PACKAGE SIZE (uncompressed): 2340 K PACKAGE DESCRIPTION: gmime: gmime (MIME parsing library) gmime: gmime: GMime is a set of utilities for parsing and creating messages using gmime: the Multipurpose Internet Mail Extension (MIME) as defined by many gmime: Internet RFCs. gmime: gmime: Jeffrey Stedfast is the author of GMime. gmime: PACKAGE NAME: gmp-4.2.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 611 K PACKAGE SIZE (uncompressed): 1870 K PACKAGE DESCRIPTION: gmp: gmp (GNU multiple precision arithmetic library) gmp: gmp: GNU MP is a library for arbitrary precision arithmetic, operating on gmp: signed integers, rational numbers, and floating point numbers. It has gmp: a rich set of functions, and the functions have a regular interface. gmp: PACKAGE NAME: gnome-icon-theme-2.14.2-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2759 K PACKAGE SIZE (uncompressed): 5460 K PACKAGE DESCRIPTION: gnome-icon-theme: gnome-icon-theme gnome-icon-theme: gnome-icon-theme: A set of default icons used by many GTK+ applications. gnome-icon-theme: PACKAGE NAME: gnuchess-5.07-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1035 K PACKAGE SIZE (uncompressed): 3030 K PACKAGE DESCRIPTION: gnuchess: gnuchess (GPL licensed chess engines and graphical frontends) gnuchess: gnuchess: This is a package of programs for playing chess. It includes the gnuchess: gnuchess and Sjeng chess engines, and the eboard and XBoard gnuchess: graphical interfaces to these engines. gnuchess: PACKAGE NAME: gnupg-1.4.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1847 K PACKAGE SIZE (uncompressed): 4640 K PACKAGE DESCRIPTION: gnupg: gnupg (The GNU Privacy Guard) gnupg: gnupg: GnuPG is GNU's tool for secure communication and data storage. It can gnupg: be used to encrypt data and to create digital signatures. It includes gnupg: an advanced key management facility and is compliant with the proposed gnupg: OpenPGP Internet standard as described in RFC2440. gnupg: PACKAGE NAME: gnupg2-2.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2396 K PACKAGE SIZE (uncompressed): 6310 K PACKAGE DESCRIPTION: gnupg2: GnuPG2 (The GNU Privacy Guard version 2.x) gnupg2: gnupg2: GnuPG is GNU's tool for secure communication and data storage. It can gnupg2: be used to encrypt data and to create digital signatures. It includes gnupg2: an advanced key management facility and is compliant with the proposed gnupg2: OpenPGP Internet standard as described in RFC2440 and the S/MIME gnupg2: standard as described by several RFCs. gnupg2: gnupg2: GnuPG 2.0 is the stable version of GnuPG integrating support for gnupg2: OpenPGP and S/MIME. It does not conflict with an installed 1.4.x gnupg2: OpenPGP-only version. PACKAGE NAME: gnuplot-4.2.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1208 K PACKAGE SIZE (uncompressed): 3180 K PACKAGE DESCRIPTION: gnuplot: gnuplot (plotting utility) gnuplot: gnuplot: Gnuplot is a command-line driven interactive function plotting utility gnuplot: for UNIX, MSDOS, and VMS platforms. The software is copyrighted but gnuplot: freely distributed (i.e., you don't have to pay for it). It was gnuplot: originally intended as graphical program which would allow scientists gnuplot: and students to visualize mathematical functions and data. Gnuplot gnuplot: supports many different types of terminals, plotters, and printers gnuplot: (including many color devices, and pseudo-devices like LaTeX) and is gnuplot: easily extensible to include new devices. gnuplot: PACKAGE NAME: gnutls-1.6.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1011 K PACKAGE SIZE (uncompressed): 2900 K PACKAGE DESCRIPTION: gnutls: gnutls (GNU TLS library) gnutls: gnutls: This is a TLS (Transport Layer Security) 1.0 and SSL (Secure Sockets gnutls: Layer) 3.0 implementation. In brief, GnuTLS can be described as a gnutls: library which offers an API to access secure communication protocols. gnutls: These protocols provide privacy over insecure lines, and were designed gnutls: to prevent eavesdropping, tampering, or message forgery. gnutls: gnutls: Homepage: http://www.gnu.org/software/gnutls/ gnutls: PACKAGE NAME: gpa-0.7.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 259 K PACKAGE SIZE (uncompressed): 910 K PACKAGE DESCRIPTION: gpa: gpa (GNU Privacy Assistant) gpa: gpa: GPA is a graphical frontend for the GNU Privacy Guard (GnuPG, gpa: http://www.gnupg.org). GPA can be used to encrypt, decrypt, and gpa: sign files, to verify signatures and to manage the private and gpa: public keys. gpa: PACKAGE NAME: gperf-3.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 94 K PACKAGE SIZE (uncompressed): 240 K PACKAGE DESCRIPTION: gperf: gperf (a perfect hash function generator) gperf: gperf: gperf is a perfect hash function generator written in C++. gperf: It transforms an n element user-specified keyword set W into a gperf: perfect hash function F. gperf currently generates the reserved gperf: keyword recognizer for lexical analyzers in several production and gperf: research compilers and language processing tools, including GNU C, gperf: GNU C++, GNU Java, GNU Pascal, GNU Modula 3, and GNU indent. gperf: gperf: gperf was written by by Douglas C. Schmidt and Bruno Haible. gperf: PACKAGE NAME: gpgme-1.1.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 336 K PACKAGE SIZE (uncompressed): 810 K PACKAGE DESCRIPTION: gpgme: gpgme (GnuPG Made Easy) gpgme: gpgme: GPGME (GnuPG Made Easy) is a C language library that allows to add gpgme: support for cryptography to a program. It is designed to make access gpgme: to public key crypto engines like GnuPG or GpgSM easier for gpgme: applications. GPGME provides a high-level crypto API for encryption, gpgme: decryption, signing, signature verification and key management. gpgme: gpgme: GPGME uses GnuPG and GpgSM as its backends to support OpenPGP and the gpgme: Cryptographic Message Syntax (CMS). gpgme: PACKAGE NAME: gpm-1.20.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 249 K PACKAGE SIZE (uncompressed): 610 K PACKAGE DESCRIPTION: gpm: gpm (general purpose mouse server) gpm: gpm: The general purpose mouse server, or gpm, allows you to use the mouse gpm: to cut and paste text from the screen. It also acts as a mouse gpm: server for applications running on the Linux console, such as the gpm: Midnight Commander file manager. gpm: gpm: NOTE: This program may cause problems when you start X on systems gpm: that do not use a serial mouse. If you get an 'unable to open mouse gpm: device' error from X, disable /etc/rc.d/rc.gpm. gpm: PACKAGE NAME: gqview-2.1.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 949 K PACKAGE SIZE (uncompressed): 2690 K PACKAGE DESCRIPTION: gqview: gqview (GQview Image Browser) gqview: gqview: GQview is an image browser that features single-click access to view gqview: images and move around the directory tree. gqview: gqview: Homepage: http://gqview.sourceforge.net/ gqview: PACKAGE NAME: grep-2.5-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 503 K PACKAGE SIZE (uncompressed): 1230 K PACKAGE DESCRIPTION: grep: grep (print lines matching a pattern) grep: grep: This is GNU grep, the "fastest grep in the west" (we hope). Grep grep: searches through textual input for lines which contain a match to a grep: specified pattern and then prints the matching lines. grep: PACKAGE NAME: groff-1.19.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 2297 K PACKAGE SIZE (uncompressed): 7250 K PACKAGE DESCRIPTION: groff: groff (document formatting system) groff: groff: The GNU groff package provides versions of troff, nroff, eqn, tbl, and groff: other Unix text-formatting utilities. Groff is used to 'compile' man groff: pages stored in groff/nroff format into a form which can be printed or groff: displayed on the screen. These man pages are stored in compressed groff: form in the /usr/man/man? directories. groff: PACKAGE NAME: gtk+-1.2.10-x86_64_slamd64-5.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 1861 K PACKAGE SIZE (uncompressed): 6140 K PACKAGE DESCRIPTION: gtk+: gtk+ (graphical user interface toolkit) gtk+: gtk+: GTK+, which stands for the Gimp ToolKit, is a library for creating gtk+: graphical user interfaces for the X Window System. This library is gtk+: needed for GIMP (the GNU Image Manipulation Program), Mozilla, and gtk+: many other X programs, including most of the programs from the GNOME gtk+: project. gtk+: PACKAGE NAME: gtk+2-2.10.13-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 9231 K PACKAGE SIZE (uncompressed): 36590 K PACKAGE DESCRIPTION: gtk+2: GTK+ version 2 gtk+2: gtk+2: This is GTK+, a multi-platform toolkit for creating graphical user gtk+2: interfaces. Offering a complete set of widgets, GTK+ is suitable for gtk+2: projects ranging from small one-off projects to complete application gtk+2: suites. gtk+2: PACKAGE NAME: gtk+2-32-2.10.13-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 1813 K PACKAGE SIZE (uncompressed): 4640 K PACKAGE DESCRIPTION: gtk+2-32: GTK+ version 2 gtk+2-32: gtk+2-32: This is GTK+, a multi-platform toolkit for creating graphical user gtk+2-32: interfaces. Offering a complete set of widgets, GTK+ is suitable for gtk+2-32: projects ranging from small one-off projects to complete application gtk+2-32: suites. gtk+2-32: gtk+2-32: This package contains 32-bit binaries. gtk+2-32: PACKAGE NAME: gucharmap-1.10.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1545 K PACKAGE SIZE (uncompressed): 5070 K PACKAGE DESCRIPTION: gucharmap: gucharmap (character map utility) gucharmap: gucharmap: gucharmap is a Unicode character map and font viewer. gucharmap: PACKAGE NAME: guile-1.8.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 1935 K PACKAGE SIZE (uncompressed): 7540 K PACKAGE DESCRIPTION: guile: guile guile: guile: This is Guile, Project GNU's extension language library. Guile is an guile: interpreter for Scheme, packaged as a library that you can link into guile: your applications to give them their own scripting language. Guile guile: will eventually support other languages as well, giving users of guile: Guile-based applications a choice of languages. guile: PACKAGE NAME: gv-3.6.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 183 K PACKAGE SIZE (uncompressed): 460 K PACKAGE DESCRIPTION: gv: gv (PS/PDF file viewer) gv: gv: gv is a PostScript and PDF previewer. It allows users to view and gv: navigate through PostScript and PDF documents on an X display by gv: providing a user interface for the ghostscript interpreter. gv: gv: gv was written by Johannes Plass, using the source code for Tim gv: Theisen's ghostview 1.5 as a starting point. gv: PACKAGE NAME: gxine-0.5.11-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 462 K PACKAGE SIZE (uncompressed): 1110 K PACKAGE DESCRIPTION: gxine: gxine (GTK+ media player based on Xine) gxine: gxine: Xine is a free multimedia player. It plays back CDs, DVDs, and VCDs, gxine: multimedia files, and multimedia streamed over a network. gxine: gxine: The gxine package contains a GTK+ graphical user interface for the gxine: Xine multimedia player. gxine: PACKAGE NAME: gzip-1.3.12-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 94 K PACKAGE SIZE (uncompressed): 220 K PACKAGE DESCRIPTION: gzip: gzip (file compression utility) gzip: gzip: Gzip reduces the size of the named files using Lempel-Ziv coding gzip: (LZ77). Whenever possible, each file is replaced by one with the gzip: extension .gz, while keeping the same ownership modes, access and gzip: modification times. gzip: PACKAGE NAME: hal-0.5.9.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 698 K PACKAGE SIZE (uncompressed): 2400 K PACKAGE DESCRIPTION: hal: hal (The HAL Hardware Abstraction Layer) hal: hal: HAL is a piece of software that provides a view of the various hal: hardware attached to a system. HAL keeps detailed metadata for each hal: piece of hardware and provides hooks so that system and desktop hal: software can react to changes in the hardware configuration (such as hal: the insertion of a DVD, or a USB flash memory stick). Users in the hal: "plugdev" or "cdrom" group will be able to use such devices on the hal: desktop without the need to mount/umount them manually. hal: hal: For more info, see: http://www.freedesktop.org/Software/hal PACKAGE NAME: hal-info-20070618-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 230 K PACKAGE DESCRIPTION: hal-info: hal-info (device information for HAL) hal-info: hal-info: The hal-info package contains device information for HAL, a Hardware hal-info: Abstraction Layer. hal-info: hal-info: For more info, see: http://www.freedesktop.org/Software/hal hal-info: PACKAGE NAME: hdparm-7.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 47 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: hdparm: hdparm (read/set hard drive parameters) hdparm: hdparm: hdparm provides a command line interface to various hard disk ioctls hdparm: supported by the Linux ATA/IDE device driver subsystem. This may be hdparm: required to enable higher-performing disk modes. hdparm: hdparm: hdparm was written by Mark Lord. hdparm: PACKAGE NAME: hfsutils-3.2.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/tcl PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: hfsutils: hfsutils hfsutils: hfsutils: hfsutils is a collection of tools for reading and writing Macintosh hfsutils: HFS volumes. These utilities can manipulate HFS volumes on nearly any hfsutils: medium. Since hfs and xhfs are linked with Tcl/Tk shared libraries, hfsutils: the hfsutils package is included here in the TCL software series. hfsutils: hfsutils: hfsutils was written by Robert Leslie hfsutils: PACKAGE NAME: hicolor-icon-theme-0.9-noarch_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: hicolor-icon-theme: hicolor-icon-theme (default icon theme) hicolor-icon-theme: hicolor-icon-theme: This is the default fallback theme used by implementations of the icon hicolor-icon-theme: theme specification. hicolor-icon-theme: hicolor-icon-theme: The specification is available at: hicolor-icon-theme: http://www.freedesktop.org/standards/icon-theme-spec/ hicolor-icon-theme: PACKAGE NAME: hplip-1.7.4a-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 13302 K PACKAGE SIZE (uncompressed): 19140 K PACKAGE DESCRIPTION: hplip: hplip (HP print/scan/fax support) hplip: hplip: HPLIP is an HP developed solution for printing, scanning, and faxing hplip: with HP inkjet and laser based printers in Linux. hplip: hplip: The HPLIP project provides printing support for more than 1000 printer hplip: models, including Deskjet, Officejet, Photosmart, PSC (Print Scan Copy), hplip: Business Inkjet, LaserJet, and LaserJet MFP. hplip: hplip: For more information, see: http://hplip.sf.net hplip: PACKAGE NAME: htdig-3.2.0b6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1163 K PACKAGE SIZE (uncompressed): 3650 K PACKAGE DESCRIPTION: htdig: htdig (web indexing and searching system) htdig: htdig: The ht://Dig system is a complete web indexing and searching system htdig: for a small domain or intranet. This system is not indended to htdig: replace the need for outside Internet search engines such as Google, htdig: but rather to cover the search needs for a single company, campus, or htdig: even a particular sub section of a web site. htdig: PACKAGE NAME: httpd-2.2.4-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2069 K PACKAGE SIZE (uncompressed): 7860 K PACKAGE DESCRIPTION: httpd: httpd (The Apache HTTP Server) httpd: httpd: Apache is an HTTP server designed as a plug-in replacement for the httpd: NCSA HTTP server. It fixes numerous bugs in the NCSA server and httpd: includes many frequently requested new features, and has an API which httpd: allows it to be extended to meet users' needs more easily. httpd: httpd: Apache is the most popular web server in the known universe; over httpd: half of the servers on the Internet are running Apache or one of httpd: its variants. httpd: PACKAGE NAME: iceauth-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: iceauth: iceauth iceauth: iceauth: iceauth is part of X11. iceauth: iceauth: For more information about the X.Org Foundation (the providers of the iceauth: X.Org implementation of the X Window System), see their website: iceauth: iceauth: http://www.x.org iceauth: PACKAGE NAME: icmpinfo-1.11-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: icmpinfo: icmpinfo (ICMP monitoring utility) icmpinfo: icmpinfo: Icmpinfo is a tool for looking at the ICMP messages received on the icmpinfo: running host. It can be used to detect and record attack attempts, as icmpinfo: well as help diagnose network problems. icmpinfo: icmpinfo: icmpinfo was written by Laurent Demailly. icmpinfo: PACKAGE NAME: ico-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: ico: ico ico: ico: ico is part of X11. ico: ico: For more information about the X.Org Foundation (the providers of the ico: X.Org implementation of the X Window System), see their website: ico: ico: http://www.x.org ico: PACKAGE NAME: imagemagick-6.3.3_9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 4654 K PACKAGE SIZE (uncompressed): 17980 K PACKAGE DESCRIPTION: imagemagick: imagemagick (a robust collection of image processing tools) imagemagick: imagemagick: ImageMagick is a collection of tools for manipulating and displaying imagemagick: digital images. It can merge images, transform image dimensions, imagemagick: do screen captures, create animation sequences, and convert between imagemagick: many different image formats. imagemagick: imagemagick: ImageMagick was written by John Cristy of ImageMagick Studio. imagemagick: imagemagick: Home page: http://www.imagemagick.org/ imagemagick: PACKAGE NAME: imake-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: imake: imake imake: imake: imake is part of X11. imake: imake: For more information about the X.Org Foundation (the providers of the imake: X.Org implementation of the X Window System), see their website: imake: imake: http://www.x.org imake: PACKAGE NAME: imapd-4.64-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 835 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE DESCRIPTION: imapd: imapd (IMAP4rev1 from pine4.63) imapd: imapd: /usr/sbin/ipop3d and /usr/sbin/imapd are servers supporting the POP3 imapd: and IMAP remote mail access protocols. They allow users to download imapd: mail from your Linux system for remote viewing. imapd: PACKAGE NAME: imlib-1.9.15-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 669 K PACKAGE SIZE (uncompressed): 1560 K PACKAGE DESCRIPTION: imlib: imlib imlib: imlib: Imlib is a display depth-independent image loading and rendering imlib: library. Imlib is designed to simplify and speed up the process of imlib: loading images and obtaining X Window System drawables. Imlib imlib: provides many simple manipulation routines which can be used for imlib: common operations. imlib: PACKAGE NAME: indent-2.2.9-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 300 K PACKAGE DESCRIPTION: indent: indent (changes the appearance of a C program) indent: indent: GNU indent changes the appearance of a C program by inserting or indent: deleting whitespace according to a plethora of options. Some canned indent: styles of formatting (like the GNU style, Kernighan & Ritchie style, indent: and original Berkeley style) are supported as well. indent: indent: GNU indent is a descendant of BSD indent. indent: PACKAGE NAME: inetd-1.79s-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: inetd: inetd (Internet super-server) inetd: inetd: This is a program to listen for connections on certain Internet inetd: sockets and invokes a program to service the request. Essentially, inetd: inetd allows running one daemon to invoke several others, reducing inetd: load on the system. Many of the network services are run through inetd: inetd, so you'll probably need it. inetd: inetd: This version of inetd was ported from OpenBSD. inetd: PACKAGE NAME: infozip-5.52-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 278 K PACKAGE SIZE (uncompressed): 650 K PACKAGE DESCRIPTION: infozip: infozip (Info-ZIP's zip and unzip utilities) infozip: infozip: zip is a compression and file packaging utility for Unix, VMS, MSDOS, infozip: OS/2, Windows NT, Minix, Atari and Macintosh, Amiga and Acorn RISC OS. infozip: It is analogous to a combination of the UNIX commands tar(1) and infozip: compress(1) and is compatible with PKZIP (Phil Katz's ZIP). A infozip: companion program (unzip(1L)), unpacks zip archives. infozip: PACKAGE NAME: inputproto-1.4.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: inputproto: inputproto inputproto: inputproto: inputproto is part of X11. inputproto: inputproto: For more information about the X.Org Foundation (the providers of the inputproto: X.Org implementation of the X Window System), see their website: inputproto: inputproto: http://www.x.org inputproto: PACKAGE NAME: iproute2-2.6.16_060323-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 416 K PACKAGE SIZE (uncompressed): 1070 K PACKAGE DESCRIPTION: iproute2: iproute2 (IP routing utilities) iproute2: iproute2: These are tools used to administer many advanced IP routing features iproute2: in the kernel. See Configure.help in the kernel documentation iproute2: (search for iproute2) for more information on which kernel options iproute2: these tools are used with. iproute2: iproute2: These utilities were written by Alexey Kuznetsov. The current iproute2: maintainer of iproute2 is Stephen Hemminger. iproute2: PACKAGE NAME: iptables-1.3.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 384 K PACKAGE SIZE (uncompressed): 1200 K PACKAGE DESCRIPTION: iptables: iptables (IP packet filter administration) iptables: iptables: iptables is a packet filter administration tool for Linux 2.4, iptables: replacing the ipchains tool that was used with the 2.2 kernel. The iptables: iptables tool is used to set up, maintain, and inspect the tables of iptables: IP packet filter rules in the Linux kernel for packet filtering, iptables: firewalling, and NAT (Network Address Translation). iptables: iptables: If you plan to set up a firewall with Linux 2.4, you'll need this. iptables: PACKAGE NAME: iptraf-3.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 307 K PACKAGE SIZE (uncompressed): 790 K PACKAGE DESCRIPTION: iptraf: iptraf iptraf: iptraf: IPTraf is a console-based network monitoring program for Linux that iptraf: displays information about IP traffic such as: iptraf: iptraf: Current TCP connections, types of IP packets, packet and byte iptraf: counts, TCP/UDP counts by ports, packet counts by packet sizes, iptraf: packet and byte counts by IP address, interface activity, flag iptraf: statuses on TCP packets, and other LAN station statistics. iptraf: iptraf: iptraf was written by Gerard Paul Java. PACKAGE NAME: iputils-s20070202-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 83 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: iputils: iputils (a collection of common network tools) iputils: iputils: The iputils package contains network tools found on nearly all *NIX iputils: systems, along with an extra or two. Some of the utilities found iputils: here include arping, clockdiff, ping, ping6, rarpd, rdisc, tracepath, iputils: tracepath6, and traceroute6. iputils: iputils: iputils is maintained by YOSHIFUJI Hideaki. iputils: PACKAGE NAME: irssi-0.8.11-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1253 K PACKAGE SIZE (uncompressed): 3340 K PACKAGE DESCRIPTION: irssi: irssi (Internet Relay Chat client) irssi: irssi: Irssi is an Internet Relay Chat client. Designed to be both secure irssi: and expandable, irssi is easily customized using modules and scripts. irssi: irssi: For more information, visit: http://irssi.org irssi: irssi: irssi was written by Timo Sirainen. irssi: PACKAGE NAME: ispell-3.2.06-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 433 K PACKAGE SIZE (uncompressed): 1650 K PACKAGE DESCRIPTION: ispell: ispell (spelling checker) ispell: ispell: Ispell is a fast screen-oriented spelling checker that shows you your ispell: errors in the context of the original file, and suggests possible ispell: corrections when it can figure them out. Compared to UNIX spell, it ispell: is faster and much easier to use. Ispell can also handle languages ispell: other than English. Ispell has a long history, and many people have ispell: contributed to the current version -- some of the major contributors ispell: include R. E. Gorin, Pace Willisson, Walt Buehring, and Geoff ispell: Kuenning. ispell: PACKAGE NAME: jed-0.99_18-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 618 K PACKAGE SIZE (uncompressed): 2090 K PACKAGE DESCRIPTION: jed: jed (programmer's editor) jed: jed: JED (by John E. Davis) is an extremely powerful but small emacs-like jed: programmer's editor that is extensible in a C-like macro language and jed: can do color syntax highlighting. Among the many features: jed: Emacs, wordstar, EDT emulation; jed: C, Fortran, TeX, text editing modes; Full undo; jed: GNU Emacs compatible info reader, and lots more. jed: jed: JED is also 8 bit clean, so you can even edit binary files! jed: PACKAGE NAME: jfsutils-1.1.11-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 282 K PACKAGE SIZE (uncompressed): 1100 K PACKAGE DESCRIPTION: jfsutils: jfsutils (IBM JFS utilities) jfsutils: jfsutils: Utilities for managing IBM's Journaled File System (JFS) under Linux: jfsutils: jfs_debugfs - shell-type JFS file system editor. jfsutils: jfs_fsck - check and repair a JFS formatted device. jfsutils: jfs_fscklog - extract a JFS fsck service log into a file. jfsutils: jfs_logdump - dump a JFS formatted device's journal log. jfsutils: jfs_mkfs - create a JFS formatted partition. jfsutils: jfs_tune - adjust tunable file system parameters on JFS. jfsutils: PACKAGE NAME: joe-3.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 351 K PACKAGE SIZE (uncompressed): 1060 K PACKAGE DESCRIPTION: joe: joe (Joe text editor) joe: joe: Joseph H. Allen's easy to use text editor, similar to WordStar[tm]. joe: PACKAGE NAME: jove-4.16.0.61-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 181 K PACKAGE SIZE (uncompressed): 500 K PACKAGE DESCRIPTION: jove: jove (Jonathan's Own Version of Emacs) jove: jove: A mostly Emacs compatible text editor, with man pages and the jove: 'teachjove' tutorial program. If you'd rather have the real thing, jove: the actual Emacs editor/environment is available in series 'E'. jove: jove: JOVE was written by Jonathan Payne. jove: PACKAGE NAME: jre-6u2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 26299 K PACKAGE SIZE (uncompressed): 75470 K PACKAGE DESCRIPTION: jre: Java(TM) 2 Platform Standard Edition Runtime Environment, jre: Version 6.0 update 1. jre: jre: The J2SE(TM) Runtime Environment (JRE) is intended for software jre: developers and vendors to redistribute with their applications. jre: It contains the Java virtual machine, runtime class libraries, and jre: Java application launcher that are necessary to run programs written jre: in the Java programming language. jre: jre: If you need development tools, obtain the jdk from /extra, or see the jre: Sun Microsystems web page: http://java.sun.com/ PACKAGE NAME: k3b-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 6257 K PACKAGE SIZE (uncompressed): 12970 K PACKAGE DESCRIPTION: k3b: k3b (The CD Creator) k3b: k3b: K3b makes writing cds under Linux easy. It has an easy to use k3b: interface and supports CD burning (including on-the-fly), copying, k3b: erasing, ripping, and more. k3b: k3b: K3b was written by Sebastian Trueg, Thomas Froescher, k3b: Christian Kvasny, and Klaus-Dieter Krannich. k3b: k3b: For more information, visit: http://www.k3b.org k3b: PACKAGE NAME: k3b-i18n-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 7155 K PACKAGE SIZE (uncompressed): 15730 K PACKAGE DESCRIPTION: k3b-i18n: k3b-i18n (internationalization files for the CD Creator) k3b-i18n: k3b-i18n: PACKAGE NAME: kbd-1.12-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 1078 K PACKAGE SIZE (uncompressed): 2920 K PACKAGE DESCRIPTION: kbd: kbd (keyboard maps and console fonts) kbd: kbd: Load and save keyboard mappings. Needed if you are not using the US kbd: keyboard map. This package also contains utilities to change your kbd: console fonts - if you install it you'll get a menu later on that lets kbd: you select from many different fonts. If you like one, you can make kbd: it your default font. A new default font can be chosen at any time by kbd: typing 'setconsolefont'. kbd: PACKAGE NAME: kbproto-1.0.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: kbproto: kbproto kbproto: kbproto: kbproto is part of X11. kbproto: kbproto: For more information about the X.Org Foundation (the providers of the kbproto: X.Org implementation of the X Window System), see their website: kbproto: kbproto: http://www.x.org kbproto: PACKAGE NAME: kde-i18n-af-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1048 K PACKAGE SIZE (uncompressed): 3150 K PACKAGE DESCRIPTION: kde-i18n-af: kde-i18n-af kde-i18n-af: kde-i18n-af: Afrikaans language support for KDE. kde-i18n-af: PACKAGE NAME: kde-i18n-ar-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1558 K PACKAGE SIZE (uncompressed): 5090 K PACKAGE DESCRIPTION: kde-i18n-ar: kde-i18n-ar kde-i18n-ar: kde-i18n-ar: Arabic language support for KDE. kde-i18n-ar: PACKAGE NAME: kde-i18n-az-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 488 K PACKAGE SIZE (uncompressed): 1650 K PACKAGE DESCRIPTION: kde-i18n-az: kde-i18n-az kde-i18n-az: kde-i18n-az: Azerbaijani language support for KDE. kde-i18n-az: PACKAGE NAME: kde-i18n-bg-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2653 K PACKAGE SIZE (uncompressed): 9300 K PACKAGE DESCRIPTION: kde-i18n-bg: kde-i18n-bg kde-i18n-bg: kde-i18n-bg: Bulgarian language support for KDE. kde-i18n-bg: PACKAGE NAME: kde-i18n-bn-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 829 K PACKAGE SIZE (uncompressed): 3200 K PACKAGE DESCRIPTION: kde-i18n-bn: kde-i18n-bn kde-i18n-bn: kde-i18n-bn: Bengali language support for KDE. kde-i18n-bn: PACKAGE NAME: kde-i18n-br-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 999 K PACKAGE SIZE (uncompressed): 3340 K PACKAGE DESCRIPTION: kde-i18n-br: kde-i18n-br kde-i18n-br: kde-i18n-br: Breton language support for KDE. kde-i18n-br: PACKAGE NAME: kde-i18n-bs-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1499 K PACKAGE SIZE (uncompressed): 4470 K PACKAGE DESCRIPTION: kde-i18n-bs: kde-i18n-bs kde-i18n-bs: kde-i18n-bs: Bosnian language support for KDE. kde-i18n-bs: PACKAGE NAME: kde-i18n-ca-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 7709 K PACKAGE SIZE (uncompressed): 17680 K PACKAGE DESCRIPTION: kde-i18n-ca: kde-i18n-ca kde-i18n-ca: kde-i18n-ca: Catalan language support for KDE. kde-i18n-ca: PACKAGE NAME: kde-i18n-cs-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3380 K PACKAGE SIZE (uncompressed): 8390 K PACKAGE DESCRIPTION: kde-i18n-cs: kde-i18n-cs kde-i18n-cs: kde-i18n-cs: Czech language support for KDE. kde-i18n-cs: PACKAGE NAME: kde-i18n-csb-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 378 K PACKAGE SIZE (uncompressed): 1130 K PACKAGE DESCRIPTION: kde-i18n-csb: kde-i18n-csb kde-i18n-csb: kde-i18n-csb: Kashubian language support for KDE. kde-i18n-csb: PACKAGE NAME: kde-i18n-cy-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1197 K PACKAGE SIZE (uncompressed): 3810 K PACKAGE DESCRIPTION: kde-i18n-cy: kde-i18n-cy kde-i18n-cy: kde-i18n-cy: Welsh language support for KDE. kde-i18n-cy: PACKAGE NAME: kde-i18n-da-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 12169 K PACKAGE SIZE (uncompressed): 26250 K PACKAGE DESCRIPTION: kde-i18n-da: kde-i18n-da kde-i18n-da: kde-i18n-da: Danish language support for KDE. kde-i18n-da: PACKAGE NAME: kde-i18n-de-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 20607 K PACKAGE SIZE (uncompressed): 37210 K PACKAGE DESCRIPTION: kde-i18n-de: kde-i18n-de kde-i18n-de: kde-i18n-de: German language support for KDE. kde-i18n-de: PACKAGE NAME: kde-i18n-el-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3171 K PACKAGE SIZE (uncompressed): 11280 K PACKAGE DESCRIPTION: kde-i18n-el: kde-i18n-el kde-i18n-el: kde-i18n-el: Greek language support for KDE. kde-i18n-el: PACKAGE NAME: kde-i18n-en_GB-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 4677 K PACKAGE SIZE (uncompressed): 13460 K PACKAGE DESCRIPTION: kde-i18n-en_GB: kde-i18n-en_GB kde-i18n-en_GB: kde-i18n-en_GB: English (UK) language support for KDE. kde-i18n-en_GB: PACKAGE NAME: kde-i18n-eo-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 969 K PACKAGE SIZE (uncompressed): 3050 K PACKAGE DESCRIPTION: kde-i18n-eo: kde-i18n-eo kde-i18n-eo: kde-i18n-eo: Esperanto language support for KDE. kde-i18n-eo: PACKAGE NAME: kde-i18n-es-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 33721 K PACKAGE SIZE (uncompressed): 50000 K PACKAGE DESCRIPTION: kde-i18n-es: kde-i18n-es kde-i18n-es: kde-i18n-es: Spanish language support for KDE. kde-i18n-es: PACKAGE NAME: kde-i18n-et-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 10052 K PACKAGE SIZE (uncompressed): 23230 K PACKAGE DESCRIPTION: kde-i18n-et: kde-i18n-et kde-i18n-et: kde-i18n-et: Estonian language support for KDE. kde-i18n-et: PACKAGE NAME: kde-i18n-eu-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2719 K PACKAGE SIZE (uncompressed): 8320 K PACKAGE DESCRIPTION: kde-i18n-eu: kde-i18n-eu kde-i18n-eu: kde-i18n-eu: Basque language support for KDE. kde-i18n-eu: PACKAGE NAME: kde-i18n-fa-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2838 K PACKAGE SIZE (uncompressed): 9680 K PACKAGE DESCRIPTION: kde-i18n-fa: kde-i18n-fa kde-i18n-fa: kde-i18n-fa: Persian (Farsi) language support for KDE. kde-i18n-fa: PACKAGE NAME: kde-i18n-fi-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2424 K PACKAGE SIZE (uncompressed): 7170 K PACKAGE DESCRIPTION: kde-i18n-fi: kde-i18n-fi kde-i18n-fi: kde-i18n-fi: Finnish language support for KDE. kde-i18n-fi: PACKAGE NAME: kde-i18n-fr-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 18023 K PACKAGE SIZE (uncompressed): 31600 K PACKAGE DESCRIPTION: kde-i18n-fr: kde-i18n-fr kde-i18n-fr: kde-i18n-fr: French language support for KDE. kde-i18n-fr: PACKAGE NAME: kde-i18n-fy-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1074 K PACKAGE SIZE (uncompressed): 3220 K PACKAGE DESCRIPTION: kde-i18n-fy: kde-i18n-fy kde-i18n-fy: kde-i18n-fy: Abkhasysk language support for KDE. kde-i18n-fy: PACKAGE NAME: kde-i18n-ga-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1212 K PACKAGE SIZE (uncompressed): 3830 K PACKAGE DESCRIPTION: kde-i18n-ga: kde-i18n-ga kde-i18n-ga: kde-i18n-ga: Irish language support for KDE. kde-i18n-ga: PACKAGE NAME: kde-i18n-gl-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2166 K PACKAGE SIZE (uncompressed): 6600 K PACKAGE DESCRIPTION: kde-i18n-gl: kde-i18n-gl kde-i18n-gl: kde-i18n-gl: Galician language support for KDE. kde-i18n-gl: PACKAGE NAME: kde-i18n-he-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2238 K PACKAGE SIZE (uncompressed): 6150 K PACKAGE DESCRIPTION: kde-i18n-he: kde-i18n-he kde-i18n-he: kde-i18n-he: Hebrew language support for KDE. kde-i18n-he: PACKAGE NAME: kde-i18n-hi-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1412 K PACKAGE SIZE (uncompressed): 5270 K PACKAGE DESCRIPTION: kde-i18n-hi: kde-i18n-hi kde-i18n-hi: kde-i18n-hi: Hindi language support for KDE. kde-i18n-hi: PACKAGE NAME: kde-i18n-hr-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1126 K PACKAGE SIZE (uncompressed): 3550 K PACKAGE DESCRIPTION: kde-i18n-hr: kde-i18n-hr kde-i18n-hr: kde-i18n-hr: Croatian language support for KDE. kde-i18n-hr: PACKAGE NAME: kde-i18n-hu-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3527 K PACKAGE SIZE (uncompressed): 10140 K PACKAGE DESCRIPTION: kde-i18n-hu: kde-i18n-hu kde-i18n-hu: kde-i18n-hu: Hungarian language support for KDE. kde-i18n-hu: PACKAGE NAME: kde-i18n-is-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1997 K PACKAGE SIZE (uncompressed): 5940 K PACKAGE DESCRIPTION: kde-i18n-is: kde-i18n-is kde-i18n-is: kde-i18n-is: Icelandic language support for KDE. kde-i18n-is: PACKAGE NAME: kde-i18n-it-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 16689 K PACKAGE SIZE (uncompressed): 31200 K PACKAGE DESCRIPTION: kde-i18n-it: kde-i18n-it kde-i18n-it: kde-i18n-it: Italian language support for KDE. kde-i18n-it: PACKAGE NAME: kde-i18n-ja-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3025 K PACKAGE SIZE (uncompressed): 9490 K PACKAGE DESCRIPTION: kde-i18n-ja: kde-i18n-ja kde-i18n-ja: kde-i18n-ja: Japanese language support for KDE. kde-i18n-ja: PACKAGE NAME: kde-i18n-kk-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1796 K PACKAGE SIZE (uncompressed): 6120 K PACKAGE DESCRIPTION: kde-i18n-kk: kde-i18n-kk kde-i18n-kk: kde-i18n-kk: Kazakh language support for KDE. kde-i18n-kk: PACKAGE NAME: kde-i18n-km-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2174 K PACKAGE SIZE (uncompressed): 9450 K PACKAGE DESCRIPTION: kde-i18n-km: kde-i18n-km kde-i18n-km: kde-i18n-km: Khmer language support for KDE. kde-i18n-km: PACKAGE NAME: kde-i18n-ko-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 320 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE DESCRIPTION: kde-i18n-ko: kde-i18n-ko kde-i18n-ko: kde-i18n-ko: Korean language support for KDE. kde-i18n-ko: PACKAGE NAME: kde-i18n-lt-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1333 K PACKAGE SIZE (uncompressed): 4120 K PACKAGE DESCRIPTION: kde-i18n-lt: kde-i18n-lt kde-i18n-lt: kde-i18n-lt: Lithuanian language support for KDE. kde-i18n-lt: PACKAGE NAME: kde-i18n-lv-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 444 K PACKAGE SIZE (uncompressed): 1390 K PACKAGE DESCRIPTION: kde-i18n-lv: kde-i18n-lv kde-i18n-lv: kde-i18n-lv: Latvian language support for KDE. kde-i18n-lv: PACKAGE NAME: kde-i18n-mk-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2089 K PACKAGE SIZE (uncompressed): 7270 K PACKAGE DESCRIPTION: kde-i18n-mk: kde-i18n-mk kde-i18n-mk: kde-i18n-mk: Macedonian language support for KDE. kde-i18n-mk: PACKAGE NAME: kde-i18n-mn-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 461 K PACKAGE SIZE (uncompressed): 1560 K PACKAGE DESCRIPTION: kde-i18n-mn: kde-i18n-mn kde-i18n-mn: kde-i18n-mn: Mongolian language support for KDE. kde-i18n-mn: PACKAGE NAME: kde-i18n-ms-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1481 K PACKAGE SIZE (uncompressed): 4520 K PACKAGE DESCRIPTION: kde-i18n-ms: kde-i18n-ms kde-i18n-ms: kde-i18n-ms: Malay language support for KDE. kde-i18n-ms: PACKAGE NAME: kde-i18n-nb-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2466 K PACKAGE SIZE (uncompressed): 7360 K PACKAGE DESCRIPTION: kde-i18n-nb: kde-i18n-nb kde-i18n-nb: kde-i18n-nb: Norwegian (Bokmaal) language support for KDE. kde-i18n-nb: PACKAGE NAME: kde-i18n-nds-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3429 K PACKAGE SIZE (uncompressed): 9490 K PACKAGE DESCRIPTION: kde-i18n-nds: kde-i18n-nds kde-i18n-nds: kde-i18n-nds: Low Saxon language support for KDE. kde-i18n-nds: PACKAGE NAME: kde-i18n-nl-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 11608 K PACKAGE SIZE (uncompressed): 23190 K PACKAGE DESCRIPTION: kde-i18n-nl: kde-i18n-nl kde-i18n-nl: kde-i18n-nl: Dutch language support for KDE. kde-i18n-nl: PACKAGE NAME: kde-i18n-nn-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1822 K PACKAGE SIZE (uncompressed): 5410 K PACKAGE DESCRIPTION: kde-i18n-nn: kde-i18n-nn kde-i18n-nn: kde-i18n-nn: Norwegian (Nynorsk) language support for KDE. kde-i18n-nn: PACKAGE NAME: kde-i18n-pa-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1090 K PACKAGE SIZE (uncompressed): 3890 K PACKAGE DESCRIPTION: kde-i18n-pa: kde-i18n-pa kde-i18n-pa: kde-i18n-pa: Punjabi language support for KDE. kde-i18n-pa: PACKAGE NAME: kde-i18n-pl-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 12934 K PACKAGE SIZE (uncompressed): 23660 K PACKAGE DESCRIPTION: kde-i18n-pl: kde-i18n-pl kde-i18n-pl: kde-i18n-pl: Polish language support for KDE. kde-i18n-pl: PACKAGE NAME: kde-i18n-pt-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 12175 K PACKAGE SIZE (uncompressed): 26710 K PACKAGE DESCRIPTION: kde-i18n-pt: kde-i18n-pt kde-i18n-pt: kde-i18n-pt: Portuguese language support for KDE. kde-i18n-pt: PACKAGE NAME: kde-i18n-pt_BR-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 11725 K PACKAGE SIZE (uncompressed): 24440 K PACKAGE DESCRIPTION: kde-i18n-pt_BR: kde-i18n-pt_BR kde-i18n-pt_BR: kde-i18n-pt_BR: Brazil portuguese language support for KDE. kde-i18n-pt_BR: PACKAGE NAME: kde-i18n-ro-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2777 K PACKAGE SIZE (uncompressed): 5890 K PACKAGE DESCRIPTION: kde-i18n-ro: kde-i18n-ro kde-i18n-ro: kde-i18n-ro: Romanian language support for KDE. kde-i18n-ro: PACKAGE NAME: kde-i18n-ru-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 8577 K PACKAGE SIZE (uncompressed): 24450 K PACKAGE DESCRIPTION: kde-i18n-ru: kde-i18n-ru kde-i18n-ru: kde-i18n-ru: Russian language support for KDE. kde-i18n-ru: PACKAGE NAME: kde-i18n-rw-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 844 K PACKAGE SIZE (uncompressed): 2880 K PACKAGE DESCRIPTION: kde-i18n-rw: kde-i18n-rw kde-i18n-rw: kde-i18n-rw: Kinyarwanda language support for KDE. kde-i18n-rw: PACKAGE NAME: kde-i18n-se-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 683 K PACKAGE SIZE (uncompressed): 2070 K PACKAGE DESCRIPTION: kde-i18n-se: kde-i18n-se kde-i18n-se: kde-i18n-se: Northern Sami language support for KDE. kde-i18n-se: PACKAGE NAME: kde-i18n-sk-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 5748 K PACKAGE SIZE (uncompressed): 13880 K PACKAGE DESCRIPTION: kde-i18n-sk: kde-i18n-sk kde-i18n-sk: kde-i18n-sk: Slovak language support for KDE. kde-i18n-sk: PACKAGE NAME: kde-i18n-sl-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 4907 K PACKAGE SIZE (uncompressed): 11630 K PACKAGE DESCRIPTION: kde-i18n-sl: kde-i18n-sl kde-i18n-sl: kde-i18n-sl: Slovenian language support for KDE. kde-i18n-sl: PACKAGE NAME: kde-i18n-sr-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3460 K PACKAGE SIZE (uncompressed): 10820 K PACKAGE DESCRIPTION: kde-i18n-sr: kde-i18n-sr kde-i18n-sr: kde-i18n-sr: Serbian language support for KDE. kde-i18n-sr: PACKAGE NAME: kde-i18n-sr@Latn-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3193 K PACKAGE SIZE (uncompressed): 8770 K PACKAGE DESCRIPTION: kde-i18n-sr@Latn: kde-i18n-sr@Latn kde-i18n-sr@Latn: kde-i18n-sr@Latn: Serbian in Latin script language support for KDE. kde-i18n-sr@Latn: PACKAGE NAME: kde-i18n-ss-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 216 K PACKAGE SIZE (uncompressed): 700 K PACKAGE DESCRIPTION: kde-i18n-ss: kde-i18n-ss kde-i18n-ss: kde-i18n-ss: Swati language support for KDE. kde-i18n-ss: PACKAGE NAME: kde-i18n-sv-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 26997 K PACKAGE SIZE (uncompressed): 41720 K PACKAGE DESCRIPTION: kde-i18n-sv: kde-i18n-sv kde-i18n-sv: kde-i18n-sv: Swedish language support for KDE. kde-i18n-sv: PACKAGE NAME: kde-i18n-ta-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2351 K PACKAGE SIZE (uncompressed): 9400 K PACKAGE DESCRIPTION: kde-i18n-ta: kde-i18n-ta kde-i18n-ta: kde-i18n-ta: Tamil language support for KDE. kde-i18n-ta: PACKAGE NAME: kde-i18n-tg-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2140 K PACKAGE SIZE (uncompressed): 7370 K PACKAGE DESCRIPTION: kde-i18n-tg: kde-i18n-tg kde-i18n-tg: kde-i18n-tg: Tajik language support for KDE. kde-i18n-tg: PACKAGE NAME: kde-i18n-th-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 964 K PACKAGE SIZE (uncompressed): 3850 K PACKAGE DESCRIPTION: kde-i18n-th: kde-i18n-th kde-i18n-th: kde-i18n-th: Thai language support for KDE. kde-i18n-th: PACKAGE NAME: kde-i18n-tr-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2149 K PACKAGE SIZE (uncompressed): 6330 K PACKAGE DESCRIPTION: kde-i18n-tr: kde-i18n-tr kde-i18n-tr: kde-i18n-tr: Turkish language support for KDE. kde-i18n-tr: PACKAGE NAME: kde-i18n-uk-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2510 K PACKAGE SIZE (uncompressed): 8380 K PACKAGE DESCRIPTION: kde-i18n-uk: kde-i18n-uk kde-i18n-uk: kde-i18n-uk: Ukrainian language support for KDE. kde-i18n-uk: PACKAGE NAME: kde-i18n-uz-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 611 K PACKAGE SIZE (uncompressed): 2140 K PACKAGE DESCRIPTION: kde-i18n-uz: kde-i18n-uz kde-i18n-uz: kde-i18n-uz: Uzbek language support for KDE. kde-i18n-uz: PACKAGE NAME: kde-i18n-vi-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 995 K PACKAGE SIZE (uncompressed): 3210 K PACKAGE DESCRIPTION: kde-i18n-vi: kde-i18n-vi kde-i18n-vi: kde-i18n-vi: Vietnamese language support for KDE. kde-i18n-vi: PACKAGE NAME: kde-i18n-zh_CN-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2182 K PACKAGE SIZE (uncompressed): 6190 K PACKAGE DESCRIPTION: kde-i18n-zh_CN: kde-i18n-zh_CN kde-i18n-zh_CN: kde-i18n-zh_CN: Simplified Chinese language support for KDE. kde-i18n-zh_CN: PACKAGE NAME: kde-i18n-zh_TW-3.5.7-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 2827 K PACKAGE SIZE (uncompressed): 8190 K PACKAGE DESCRIPTION: kde-i18n-zh_TW: kde-i18n-zh_TW kde-i18n-zh_TW: kde-i18n-zh_TW: Chinese language support for KDE. kde-i18n-zh_TW: PACKAGE NAME: kdeaccessibility-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 8772 K PACKAGE SIZE (uncompressed): 15570 K PACKAGE DESCRIPTION: kdeaccessibility: kdeaccessibility kdeaccessibility: kdeaccessibility: KDE accessibility programs, including kmag (a screen magnifier), kdeaccessibility: kmousetool (clicks the mouse for you), and kmouth (a speech kdeaccessibility: synthesizer frontend). kdeaccessibility: PACKAGE NAME: kdeaddons-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 2713 K PACKAGE SIZE (uncompressed): 10550 K PACKAGE DESCRIPTION: kdeaddons: kdeaddons kdeaddons: kdeaddons: Additional plugins and scripts for some KDE applications. kdeaddons: PACKAGE NAME: kdeadmin-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 2173 K PACKAGE SIZE (uncompressed): 5060 K PACKAGE DESCRIPTION: kdeadmin: kdeadmin kdeadmin: kdeadmin: KDE system administration tools. kdeadmin: PACKAGE NAME: kdeartwork-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 16365 K PACKAGE SIZE (uncompressed): 27190 K PACKAGE DESCRIPTION: kdeartwork: kdeartwork kdeartwork: kdeartwork: Additional themes, screensavers, sounds, wallpapers, and window kdeartwork: styles. kdeartwork: PACKAGE NAME: kdebase-3.5.7-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 29719 K PACKAGE SIZE (uncompressed): 65170 K PACKAGE DESCRIPTION: kdebase: kdebase (KDE base package) kdebase: kdebase: Core applications for the K Desktop Environment. kdebase: PACKAGE NAME: kdebindings-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 16105 K PACKAGE SIZE (uncompressed): 69520 K PACKAGE DESCRIPTION: kdebindings: kdebindings kdebindings: kdebindings: KDE and most KDE applications are implemented using the C++ kdebindings: programming language, but that doesn't mean you don't have a choice. kdebindings: This package contains a number of bindings to other languages, kdebindings: including scripting languages and other systems programming languages. kdebindings: PACKAGE NAME: kdeedu-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 30786 K PACKAGE SIZE (uncompressed): 57640 K PACKAGE DESCRIPTION: kdeedu: kdeedu kdeedu: kdeedu: Educational applications for KDE. kdeedu: PACKAGE NAME: kdegames-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 11443 K PACKAGE SIZE (uncompressed): 22790 K PACKAGE DESCRIPTION: kdegames: kdegames kdegames: kdegames: A collection of games for the K Desktop Environment. kdegames: PACKAGE NAME: kdegraphics-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 9758 K PACKAGE SIZE (uncompressed): 26790 K PACKAGE DESCRIPTION: kdegraphics: kdegraphics (KDE graphics programs) kdegraphics: kdegraphics: Graphics programs for KDE, including: kdvi (displays TeX's device kdegraphics: independent .dvi files), kfax (displays fax files), kfract (a fractal kdegraphics: generator), kghostview (displays postscript .ps files), kpaint (a kdegraphics: simple drawing program), kruler (an onscreen ruler), ksnapshot (a kdegraphics: screenshot utility), and kview (displays many graphic file formats). kdegraphics: PACKAGE NAME: kdelibs-3.5.7-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 19726 K PACKAGE SIZE (uncompressed): 60050 K PACKAGE DESCRIPTION: kdelibs: kdelibs (KDE libraries) kdelibs: kdelibs: System libraries and other resources required by KDE. kdelibs: PACKAGE NAME: kdemultimedia-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 9217 K PACKAGE SIZE (uncompressed): 32090 K PACKAGE DESCRIPTION: kdemultimedia: kdemultimedia kdemultimedia: kdemultimedia: Multimedia applications for KDE. kdemultimedia: PACKAGE NAME: kdenetwork-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 12871 K PACKAGE SIZE (uncompressed): 34630 K PACKAGE DESCRIPTION: kdenetwork: kdenetwork (network utilities for KDE) kdenetwork: kdenetwork: Network related utilities for the K Desktop Environment. kdenetwork: PACKAGE NAME: kdepim-3.5.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 19322 K PACKAGE SIZE (uncompressed): 57830 K PACKAGE DESCRIPTION: kdepim: kdepim kdepim: kdepim: This is a collection of Personal Information Management (PIM) tools. kdepim: PACKAGE NAME: kdesdk-3.5.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 7469 K PACKAGE SIZE (uncompressed): 19620 K PACKAGE DESCRIPTION: kdesdk: kdesdk kdesdk: kdesdk: KDE Software Development Kit. This is a collection of applications kdesdk: and tools used by KDE developers. It also has example code for use in kdesdk: learning KDE programming or starting a new KDE application. kdesdk: PACKAGE NAME: kdetoys-3.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 3027 K PACKAGE SIZE (uncompressed): 5200 K PACKAGE DESCRIPTION: kdetoys: kdetoys (toys for KDE) kdetoys: kdetoys: Some toys for use with KDE such as kmoon (displays various phases of kdetoys: the moon), kworldwatch (displays where in the world it is light and kdetoys: dark depending on time), kodo (a mouse odometer which shows how far kdetoys: your mouse has traveled), and kteatime (alerts you when your tea is kdetoys: ready). kdetoys: PACKAGE NAME: kdeutils-3.5.7-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 3938 K PACKAGE SIZE (uncompressed): 11300 K PACKAGE DESCRIPTION: kdeutils: kdeutils kdeutils: kdeutils: This package includes various utilities for KDE. kdeutils: PACKAGE NAME: kdevelop-3.4.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 15321 K PACKAGE SIZE (uncompressed): 39980 K PACKAGE DESCRIPTION: kdevelop: kdevelop kdevelop: kdevelop: The KDevelop integrated C/C++ application development environment. kdevelop: PACKAGE NAME: kdewebdev-3.5.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 6959 K PACKAGE SIZE (uncompressed): 18140 K PACKAGE DESCRIPTION: kdewebdev: kdewebdev (web development package for the K Desktop Environment) kdewebdev: kdewebdev: The kdewebdev package contains Quanta Plus and other applications kdewebdev: which are useful for web development. kdewebdev: PACKAGE NAME: kernel-generic-2.6.22.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 2388 K PACKAGE SIZE (uncompressed): 3290 K PACKAGE DESCRIPTION: kernel-generic: kernel-generic (a general purpose SMP Linux kernel) kernel-generic: kernel-generic: This is a Linux kernel with built-in support for most disk kernel-generic: controllers. To use filesystems, or to load support for a SCSI or kernel-generic: other controller, then you'll need to load one or more kernel kernel-generic: modules using an initial ramdisk, or initrd. For more information kernel-generic: about creating an initrd, see the README.initrd file in the /boot kernel-generic: directory. kernel-generic: kernel-generic: SMP is "Symmetric multiprocessing", or multiple CPU/core support. kernel-generic: PACKAGE NAME: kernel-headers-2.6.22.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 960 K PACKAGE SIZE (uncompressed): 4350 K PACKAGE DESCRIPTION: kernel-headers: kernel-headers (Linux kernel include files) kernel-headers: kernel-headers: These are the include files from the Linux kernel. kernel-headers: kernel-headers: You'll need these to compile most system software for Linux. kernel-headers: PACKAGE NAME: kernel-huge-2.6.22.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 4639 K PACKAGE SIZE (uncompressed): 5950 K PACKAGE DESCRIPTION: kernel-huge: kernel-huge (a fully-loaded SMP Linux kernel) kernel-huge: kernel-huge: This is a Linux kernel with built-in support for most disk kernel-huge: controllers. If you're looking for a more stripped down kernel kernel-huge: (this one contains everything but the kitchen sink ;-), then install kernel-huge: the kernel-generic in the /boot directory along with an initrd to kernel-huge: load support for your boot device and filesystem. For instructions kernel-huge: on the initrd, see README.initrd in the /boot directory. kernel-huge: kernel-huge: SMP is "Symmetric multiprocessing", or multiple CPU/core support. kernel-huge: PACKAGE NAME: kernel-modules-2.6.22.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 15148 K PACKAGE SIZE (uncompressed): 57830 K PACKAGE DESCRIPTION: kernel-modules: kernel-modules (SMP Linux kernel modules) kernel-modules: kernel-modules: A kernel module is a piece of object code that can be dynamically kernel-modules: loaded into the Linux kernel to provide new kernel functions. Most of kernel-modules: these modules provide support for devices such as CD-ROM drives, tape kernel-modules: drives, and ethernet cards. You can choose which modules to load by kernel-modules: editing /etc/rc.d/rc.modules. kernel-modules: PACKAGE NAME: kernel-source-2.6.22.8-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/k PACKAGE SIZE (compressed): 55895 K PACKAGE SIZE (uncompressed): 259190 K PACKAGE DESCRIPTION: kernel-source: kernel-source (Linux kernel source) kernel-source: kernel-source: Source code for Linus Torvalds' Linux kernel. kernel-source: kernel-source: This is the complete and unmodified source code for the Linux kernel. kernel-source: PACKAGE NAME: knemo-0.4.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 279 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE DESCRIPTION: knemo: knemo (The KDE Network Monitor) knemo: knemo: KNemo offers a network monitor similar to the one found in that other knemo: operating system. Supports Ethernet (including wireless) and PPP knemo: connections, showing both incoming and outgoing traffic. knemo: knemo: KNemo was written by Percy Leonhardt. knemo: PACKAGE NAME: koffice-1.6.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kde PACKAGE SIZE (compressed): 54709 K PACKAGE SIZE (uncompressed): 111660 K PACKAGE DESCRIPTION: koffice: koffice (KDE office productivity suite) koffice: koffice: KOffice office productivity applications. Included are a word koffice: processor, spreadsheet, presentation program, chart and graph creator, koffice: vector graphics tool, database report creator, flowcharting program, koffice: integrated data management program, a pixel graphics editor, koffice: a mathematical formula editor, and KOffice Workspace koffice: (a combination of all of the above). koffice: PACKAGE NAME: koffice-l10n-bg-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 406 K PACKAGE SIZE (uncompressed): 1330 K PACKAGE DESCRIPTION: koffice-l10n-bg: koffice-l10n-bg koffice-l10n-bg: koffice-l10n-bg: Bulgarian language support for KOffice. koffice-l10n-bg: PACKAGE NAME: koffice-l10n-ca-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1644 K PACKAGE SIZE (uncompressed): 4210 K PACKAGE DESCRIPTION: koffice-l10n-ca: koffice-l10n-ca koffice-l10n-ca: koffice-l10n-ca: Catalan language support for KOffice. koffice-l10n-ca: PACKAGE NAME: koffice-l10n-cs-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 226 K PACKAGE SIZE (uncompressed): 620 K PACKAGE DESCRIPTION: koffice-l10n-cs: koffice-l10n-cs koffice-l10n-cs: koffice-l10n-cs: Czech language support for KOffice. koffice-l10n-cs: PACKAGE NAME: koffice-l10n-cy-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 241 K PACKAGE SIZE (uncompressed): 670 K PACKAGE DESCRIPTION: koffice-l10n-cy: koffice-l10n-cy koffice-l10n-cy: koffice-l10n-cy: Welsh language support for KOffice. koffice-l10n-cy: PACKAGE NAME: koffice-l10n-da-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1153 K PACKAGE SIZE (uncompressed): 3380 K PACKAGE DESCRIPTION: koffice-l10n-da: koffice-l10n-da koffice-l10n-da: koffice-l10n-da: Danish language support for KOffice. koffice-l10n-da: PACKAGE NAME: koffice-l10n-de-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 5662 K PACKAGE SIZE (uncompressed): 8400 K PACKAGE DESCRIPTION: koffice-l10n-de: koffice-l10n-de koffice-l10n-de: koffice-l10n-de: German language support for KOffice. koffice-l10n-de: PACKAGE NAME: koffice-l10n-el-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 424 K PACKAGE SIZE (uncompressed): 1420 K PACKAGE DESCRIPTION: koffice-l10n-el: koffice-l10n-el koffice-l10n-el: koffice-l10n-el: Greek language support for KOffice. koffice-l10n-el: PACKAGE NAME: koffice-l10n-en_GB-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 306 K PACKAGE SIZE (uncompressed): 1080 K PACKAGE DESCRIPTION: koffice-l10n-en_GB: koffice-l10n-en_GB koffice-l10n-en_GB: koffice-l10n-en_GB: English (UK) language support for KOffice. koffice-l10n-en_GB: PACKAGE NAME: koffice-l10n-es-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 14888 K PACKAGE SIZE (uncompressed): 18170 K PACKAGE DESCRIPTION: koffice-l10n-es: koffice-l10n-es koffice-l10n-es: koffice-l10n-es: Spanish language support for KOffice. koffice-l10n-es: PACKAGE NAME: koffice-l10n-et-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1241 K PACKAGE SIZE (uncompressed): 3460 K PACKAGE DESCRIPTION: koffice-l10n-et: koffice-l10n-et koffice-l10n-et: koffice-l10n-et: Estonian language support for KOffice. koffice-l10n-et: PACKAGE NAME: koffice-l10n-eu-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 258 K PACKAGE SIZE (uncompressed): 730 K PACKAGE DESCRIPTION: koffice-l10n-eu: koffice-l10n-eu koffice-l10n-eu: koffice-l10n-eu: Basque language support for KOffice. koffice-l10n-eu: PACKAGE NAME: koffice-l10n-fa-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 374 K PACKAGE SIZE (uncompressed): 1200 K PACKAGE DESCRIPTION: koffice-l10n-fa: koffice-l10n-fa koffice-l10n-fa: koffice-l10n-fa: Persian (Farsi) language support for KOffice. koffice-l10n-fa: PACKAGE NAME: koffice-l10n-fi-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 257 K PACKAGE SIZE (uncompressed): 700 K PACKAGE DESCRIPTION: koffice-l10n-fi: koffice-l10n-fi koffice-l10n-fi: koffice-l10n-fi: Finnish language support for KOffice. koffice-l10n-fi: PACKAGE NAME: koffice-l10n-fr-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 5375 K PACKAGE SIZE (uncompressed): 7860 K PACKAGE DESCRIPTION: koffice-l10n-fr: koffice-l10n-fr koffice-l10n-fr: koffice-l10n-fr: French language support for KOffice. koffice-l10n-fr: PACKAGE NAME: koffice-l10n-ga-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 182 K PACKAGE SIZE (uncompressed): 500 K PACKAGE DESCRIPTION: koffice-l10n-ga: koffice-l10n-ga koffice-l10n-ga: koffice-l10n-ga: Irish Gaelic language support for KOffice. koffice-l10n-ga: PACKAGE NAME: koffice-l10n-gl-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 437 K PACKAGE SIZE (uncompressed): 1200 K PACKAGE DESCRIPTION: koffice-l10n-gl: koffice-l10n-gl koffice-l10n-gl: koffice-l10n-gl: Galician language support for KOffice. koffice-l10n-gl: PACKAGE NAME: koffice-l10n-hu-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 342 K PACKAGE SIZE (uncompressed): 970 K PACKAGE DESCRIPTION: koffice-l10n-hu: koffice-l10n-hu koffice-l10n-hu: koffice-l10n-hu: Hungarian language support for KOffice. koffice-l10n-hu: PACKAGE NAME: koffice-l10n-it-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1591 K PACKAGE SIZE (uncompressed): 4010 K PACKAGE DESCRIPTION: koffice-l10n-it: koffice-l10n-it koffice-l10n-it: koffice-l10n-it: Italian language support for KOffice. koffice-l10n-it: PACKAGE NAME: koffice-l10n-ja-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 366 K PACKAGE SIZE (uncompressed): 1090 K PACKAGE DESCRIPTION: koffice-l10n-ja: koffice-l10n-ja koffice-l10n-ja: koffice-l10n-ja: Japanese language support for KOffice. koffice-l10n-ja: PACKAGE NAME: koffice-l10n-km-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 98 K PACKAGE SIZE (uncompressed): 390 K PACKAGE DESCRIPTION: koffice-l10n-km: koffice-l10n-km koffice-l10n-km: koffice-l10n-km: Khmer language support for KOffice. koffice-l10n-km: PACKAGE NAME: koffice-l10n-lv-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 74 K PACKAGE SIZE (uncompressed): 220 K PACKAGE DESCRIPTION: koffice-l10n-lv: koffice-l10n-lv koffice-l10n-lv: koffice-l10n-lv: Latvian language support for KOffice. koffice-l10n-lv: PACKAGE NAME: koffice-l10n-ms-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 251 K PACKAGE SIZE (uncompressed): 710 K PACKAGE DESCRIPTION: koffice-l10n-ms: koffice-l10n-ms koffice-l10n-ms: koffice-l10n-ms: Malay language support for KOffice. koffice-l10n-ms: PACKAGE NAME: koffice-l10n-nb-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 315 K PACKAGE SIZE (uncompressed): 870 K PACKAGE DESCRIPTION: koffice-l10n-nb: koffice-l10n-nb koffice-l10n-nb: koffice-l10n-nb: Norwegian (Bokmaal) language support for KOffice. koffice-l10n-nb: PACKAGE NAME: koffice-l10n-nds-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 225 K PACKAGE SIZE (uncompressed): 650 K PACKAGE DESCRIPTION: koffice-l10n-nds: koffice-l10n-nds koffice-l10n-nds: koffice-l10n-nds: Low Saxon language support for KOffice. koffice-l10n-nds: PACKAGE NAME: koffice-l10n-ne-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 414 K PACKAGE SIZE (uncompressed): 1600 K PACKAGE DESCRIPTION: koffice-l10n-ne: koffice-l10n-ne koffice-l10n-ne: koffice-l10n-ne: Nepali language support for KOffice. koffice-l10n-ne: PACKAGE NAME: koffice-l10n-nl-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 3258 K PACKAGE SIZE (uncompressed): 5900 K PACKAGE DESCRIPTION: koffice-l10n-nl: koffice-l10n-nl koffice-l10n-nl: koffice-l10n-nl: Dutch language support for KOffice. koffice-l10n-nl: PACKAGE NAME: koffice-l10n-pl-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 389 K PACKAGE SIZE (uncompressed): 1080 K PACKAGE DESCRIPTION: koffice-l10n-pl: koffice-l10n-pl koffice-l10n-pl: koffice-l10n-pl: Polish language support for KOffice. koffice-l10n-pl: PACKAGE NAME: koffice-l10n-pt-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 1200 K PACKAGE SIZE (uncompressed): 3620 K PACKAGE DESCRIPTION: koffice-l10n-pt: koffice-l10n-pt koffice-l10n-pt: koffice-l10n-pt: Portuguese language support for KOffice. koffice-l10n-pt: PACKAGE NAME: koffice-l10n-pt_BR-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 5770 K PACKAGE SIZE (uncompressed): 8420 K PACKAGE DESCRIPTION: koffice-l10n-pt_BR: koffice-l10n-pt_BR koffice-l10n-pt_BR: koffice-l10n-pt_BR: Brazil portuguese language support for KOffice. koffice-l10n-pt_BR: PACKAGE NAME: koffice-l10n-ru-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 927 K PACKAGE SIZE (uncompressed): 3090 K PACKAGE DESCRIPTION: koffice-l10n-ru: koffice-l10n-ru koffice-l10n-ru: koffice-l10n-ru: Russian language support for KOffice. koffice-l10n-ru: PACKAGE NAME: koffice-l10n-sk-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 843 K PACKAGE SIZE (uncompressed): 1520 K PACKAGE DESCRIPTION: koffice-l10n-sk: koffice-l10n-sk koffice-l10n-sk: koffice-l10n-sk: Slovak language support for KOffice. koffice-l10n-sk: PACKAGE NAME: koffice-l10n-sl-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 324 K PACKAGE SIZE (uncompressed): 910 K PACKAGE DESCRIPTION: koffice-l10n-sl: koffice-l10n-sl koffice-l10n-sl: koffice-l10n-sl: Slovenian language support for KOffice. koffice-l10n-sl: PACKAGE NAME: koffice-l10n-sr-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 408 K PACKAGE SIZE (uncompressed): 1290 K PACKAGE DESCRIPTION: koffice-l10n-sr: koffice-l10n-sr koffice-l10n-sr: koffice-l10n-sr: Serbian language support for KOffice. koffice-l10n-sr: PACKAGE NAME: koffice-l10n-sr@Latn-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 379 K PACKAGE SIZE (uncompressed): 1050 K PACKAGE DESCRIPTION: koffice-l10n-sr@Latn: koffice-l10n-sr@Latn koffice-l10n-sr@Latn: koffice-l10n-sr@Latn: Serbian in Latin script language support for KOffice. koffice-l10n-sr@Latn: PACKAGE NAME: koffice-l10n-sv-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 6141 K PACKAGE SIZE (uncompressed): 8880 K PACKAGE DESCRIPTION: koffice-l10n-sv: koffice-l10n-sv koffice-l10n-sv: koffice-l10n-sv: Swedish language support for KOffice. koffice-l10n-sv: PACKAGE NAME: koffice-l10n-tr-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 300 K PACKAGE SIZE (uncompressed): 830 K PACKAGE DESCRIPTION: koffice-l10n-tr: koffice-l10n-tr koffice-l10n-tr: koffice-l10n-tr: Turkish language support for KOffice. koffice-l10n-tr: PACKAGE NAME: koffice-l10n-uk-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 337 K PACKAGE SIZE (uncompressed): 1060 K PACKAGE DESCRIPTION: koffice-l10n-uk: koffice-l10n-uk koffice-l10n-uk: koffice-l10n-uk: Ukrainian language support for KOffice. koffice-l10n-uk: PACKAGE NAME: koffice-l10n-zh_CN-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 308 K PACKAGE SIZE (uncompressed): 850 K PACKAGE DESCRIPTION: koffice-l10n-zh_CN: koffice-l10n-zh_CN koffice-l10n-zh_CN: koffice-l10n-zh_CN: Simplified Chinese language support for KOffice. koffice-l10n-zh_CN: PACKAGE NAME: koffice-l10n-zh_TW-1.6.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/kdei PACKAGE SIZE (compressed): 369 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE DESCRIPTION: koffice-l10n-zh_TW: koffice-l10n-zh_TW koffice-l10n-zh_TW: koffice-l10n-zh_TW: Chinese language support for KOffice. koffice-l10n-zh_TW: PACKAGE NAME: ksh93-2007_03_28-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 824 K PACKAGE SIZE (uncompressed): 2130 K PACKAGE DESCRIPTION: ksh93: ksh (AT&T Korn Shell 93) ksh93: ksh93: The KornShell language and interactive shell were designed by ksh93: David G. Korn at AT&T Bell Laboratories. Besides offering a powerful ksh93: interactive shell, it also offers a robust programming language with ksh93: such features as associative arrays and built in integer math ksh93: operations. ksh is an excellent choice for system administration ksh93: scripts and for everyday interactive use. ksh93: ksh93: The official site for the Korn Shell is http://www.kornshell.com/ ksh93: PACKAGE NAME: lbxproxy-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 82 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: lbxproxy: lbxproxy lbxproxy: lbxproxy: lbxproxy is part of X11. lbxproxy: lbxproxy: For more information about the X.Org Foundation (the providers of the lbxproxy: X.Org implementation of the X Window System), see their website: lbxproxy: lbxproxy: http://www.x.org lbxproxy: PACKAGE NAME: lcms-1.16-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 210 K PACKAGE SIZE (uncompressed): 640 K PACKAGE DESCRIPTION: lcms: lcms (little cms engine) lcms: lcms: Little cms is a small, speed optimized color management engine. lcms: lcms: lcms was written by Marti Maria . lcms: PACKAGE NAME: less-394-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 114 K PACKAGE SIZE (uncompressed): 250 K PACKAGE DESCRIPTION: less: less (file pager) less: less: Less is a paginator similar to more (1), but which allows backward less: movement in the file as well as forward movement. Also, less does not less: have to read the entire input file before starting, so with large less: input files it starts up faster than text editors like vi (1). less: less: Less was written by Mark Nudelman. less: PACKAGE NAME: lesstif-0.95.0-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2352 K PACKAGE SIZE (uncompressed): 7870 K PACKAGE DESCRIPTION: lesstif: lesstif (a free replacement for OSF/Motif(R)) lesstif: lesstif: LessTif is the Hungry Programmers' (www.hungry.com) free clone of lesstif: Motif(R). It aims to be source compatible with OSF/Motif(R) meaning lesstif: that the same source code should compile with both and work exactly lesstif: the same. This package contains the libraries and header files to lesstif: be able to run and compile Motif applications, along with the lesstif lesstif: version of mwm, the Motif window manager. lesstif: PACKAGE NAME: lftp-3.5.10-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 873 K PACKAGE SIZE (uncompressed): 2670 K PACKAGE DESCRIPTION: lftp: lftp (command line file transfer program) lftp: lftp: lftp is a program that allows sophisticated ftp and http connections lftp: to other hosts. lftp can handle many file access methods including lftp: ftp, ftps, http, https, hftp, fish and file. Every operation in lftp lftp: is reliable, that is any non-fatal error is ignored and the operation lftp: is retried. lftp has shell-like command syntax. lftp has a built in lftp: mirror feature which can download or upload a whole directory tree. lftp: To learn about many more features of lftp, see 'man lftp'. lftp: PACKAGE NAME: lha-114i-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 52 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: lha: lha (LHa archive utility) lha: lha: LHa is an archiving and compressing utility written by Tsugio Okamoto. lha: PACKAGE NAME: libFS-1.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: libFS: libFS libFS: libFS: libFS is part of X11. libFS: libFS: For more information about the X.Org Foundation (the providers of the libFS: X.Org implementation of the X Window System), see their website: libFS: libFS: http://www.x.org libFS: PACKAGE NAME: libICE-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: libICE: libICE libICE: libICE: libICE is part of X11. libICE: libICE: For more information about the X.Org Foundation (the providers of the libICE: X.Org implementation of the X Window System), see their website: libICE: libICE: http://www.x.org libICE: PACKAGE NAME: libSM-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: libSM: libSM libSM: libSM: libSM is part of X11. libSM: libSM: For more information about the X.Org Foundation (the providers of the libSM: X.Org implementation of the X Window System), see their website: libSM: libSM: http://www.x.org libSM: PACKAGE NAME: libX11-1.1.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1309 K PACKAGE SIZE (uncompressed): 4190 K PACKAGE DESCRIPTION: libX11: libX11 libX11: libX11: libX11 is part of X11. libX11: libX11: For more information about the X.Org Foundation (the providers of the libX11: X.Org implementation of the X Window System), see their website: libX11: libX11: http://www.x.org libX11: PACKAGE NAME: libXScrnSaver-1.1.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXScrnSaver: libXScrnSaver libXScrnSaver: libXScrnSaver: libXScrnSaver is part of X11. libXScrnSaver: libXScrnSaver: For more information about the X.Org Foundation (the providers of the libXScrnSaver: X.Org implementation of the X Window System), see their website: libXScrnSaver: libXScrnSaver: http://www.x.org libXScrnSaver: PACKAGE NAME: libXTrap-1.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: libXTrap: libXTrap libXTrap: libXTrap: libXTrap is part of X11. libXTrap: libXTrap: For more information about the X.Org Foundation (the providers of the libXTrap: X.Org implementation of the X Window System), see their website: libXTrap: libXTrap: http://www.x.org libXTrap: PACKAGE NAME: libXau-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXau: libXau libXau: libXau: libXau is part of X11. libXau: libXau: For more information about the X.Org Foundation (the providers of the libXau: X.Org implementation of the X Window System), see their website: libXau: libXau: http://www.x.org libXau: PACKAGE NAME: libXaw-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 556 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE DESCRIPTION: libXaw: libXaw libXaw: libXaw: libXaw is part of X11. libXaw: libXaw: For more information about the X.Org Foundation (the providers of the libXaw: X.Org implementation of the X Window System), see their website: libXaw: libXaw: http://www.x.org libXaw: PACKAGE NAME: libXcomposite-0.3.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXcomposite: libXcomposite libXcomposite: libXcomposite: libXcomposite is part of X11. libXcomposite: libXcomposite: For more information about the X.Org Foundation (the providers of the libXcomposite: X.Org implementation of the X Window System), see their website: libXcomposite: libXcomposite: http://www.x.org libXcomposite: PACKAGE NAME: libXcursor-1.1.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: libXcursor: libXcursor libXcursor: libXcursor: libXcursor is part of X11. libXcursor: libXcursor: For more information about the X.Org Foundation (the providers of the libXcursor: X.Org implementation of the X Window System), see their website: libXcursor: libXcursor: http://www.x.org libXcursor: PACKAGE NAME: libXdamage-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: libXdamage: libXdamage libXdamage: libXdamage: libXdamage is part of X11. libXdamage: libXdamage: For more information about the X.Org Foundation (the providers of the libXdamage: X.Org implementation of the X Window System), see their website: libXdamage: libXdamage: http://www.x.org libXdamage: PACKAGE NAME: libXdmcp-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXdmcp: libXdmcp libXdmcp: libXdmcp: libXdmcp is part of X11. libXdmcp: libXdmcp: For more information about the X.Org Foundation (the providers of the libXdmcp: X.Org implementation of the X Window System), see their website: libXdmcp: libXdmcp: http://www.x.org libXdmcp: PACKAGE NAME: libXevie-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: libXevie: libXevie libXevie: libXevie: libXevie is part of X11. libXevie: libXevie: For more information about the X.Org Foundation (the providers of the libXevie: X.Org implementation of the X Window System), see their website: libXevie: libXevie: http://www.x.org libXevie: PACKAGE NAME: libXext-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: libXext: libXext libXext: libXext: libXext is part of X11. libXext: libXext: For more information about the X.Org Foundation (the providers of the libXext: X.Org implementation of the X Window System), see their website: libXext: libXext: http://www.x.org libXext: PACKAGE NAME: libXfixes-4.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: libXfixes: libXfixes libXfixes: libXfixes: libXfixes is part of X11. libXfixes: libXfixes: For more information about the X.Org Foundation (the providers of the libXfixes: X.Org implementation of the X Window System), see their website: libXfixes: libXfixes: http://www.x.org libXfixes: PACKAGE NAME: libXfont-1.2.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 220 K PACKAGE SIZE (uncompressed): 530 K PACKAGE DESCRIPTION: libXfont: libXfont libXfont: libXfont: libXfont is part of X11. libXfont: libXfont: For more information about the X.Org Foundation (the providers of the libXfont: X.Org implementation of the X Window System), see their website: libXfont: libXfont: http://www.x.org libXfont: PACKAGE NAME: libXfontcache-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: libXfontcache: libXfontcache libXfontcache: libXfontcache: libXfontcache is part of X11. libXfontcache: libXfontcache: For more information about the X.Org Foundation (the providers of the libXfontcache: X.Org implementation of the X Window System), see their website: libXfontcache: libXfontcache: http://www.x.org libXfontcache: PACKAGE NAME: libXft-2.1.12-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: libXft: libXft libXft: libXft: libXft is part of X11. libXft: libXft: For more information about the X.Org Foundation (the providers of the libXft: X.Org implementation of the X Window System), see their website: libXft: libXft: http://www.x.org libXft: PACKAGE NAME: libXi-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 57 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: libXi: libXi libXi: libXi: libXi is part of X11. libXi: libXi: For more information about the X.Org Foundation (the providers of the libXi: X.Org implementation of the X Window System), see their website: libXi: libXi: http://www.x.org libXi: PACKAGE NAME: libXinerama-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: libXinerama: libXinerama libXinerama: libXinerama: libXinerama is part of X11. libXinerama: libXinerama: For more information about the X.Org Foundation (the providers of the libXinerama: X.Org implementation of the X Window System), see their website: libXinerama: libXinerama: http://www.x.org libXinerama: PACKAGE NAME: libXmu-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: libXmu: libXmu libXmu: libXmu: libXmu is part of X11. libXmu: libXmu: For more information about the X.Org Foundation (the providers of the libXmu: X.Org implementation of the X Window System), see their website: libXmu: libXmu: http://www.x.org libXmu: PACKAGE NAME: libXp-1.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 78 K PACKAGE SIZE (uncompressed): 140 K PACKAGE DESCRIPTION: libXp: libXp libXp: libXp: libXp is part of X11. libXp: libXp: For more information about the X.Org Foundation (the providers of the libXp: X.Org implementation of the X Window System), see their website: libXp: libXp: http://www.x.org libXp: PACKAGE NAME: libXpm-3.5.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 57 K PACKAGE SIZE (uncompressed): 140 K PACKAGE DESCRIPTION: libXpm: libXpm libXpm: libXpm: libXpm is part of X11. libXpm: libXpm: For more information about the X.Org Foundation (the providers of the libXpm: X.Org implementation of the X Window System), see their website: libXpm: libXpm: http://www.x.org libXpm: PACKAGE NAME: libXprintAppUtil-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXprintAppUtil: libXprintAppUtil libXprintAppUtil: libXprintAppUtil: libXprintAppUtil is part of X11. libXprintAppUtil: libXprintAppUtil: For more information about the X.Org Foundation (the providers of the libXprintAppUtil: X.Org implementation of the X Window System), see their website: libXprintAppUtil: libXprintAppUtil: http://www.x.org libXprintAppUtil: PACKAGE NAME: libXprintUtil-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: libXprintUtil: libXprintUtil libXprintUtil: libXprintUtil: libXprintUtil is part of X11. libXprintUtil: libXprintUtil: For more information about the X.Org Foundation (the providers of the libXprintUtil: X.Org implementation of the X Window System), see their website: libXprintUtil: libXprintUtil: http://www.x.org libXprintUtil: PACKAGE NAME: libXrandr-1.2.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: libXrandr: libXrandr libXrandr: libXrandr: libXrandr is part of X11. libXrandr: libXrandr: For more information about the X.Org Foundation (the providers of the libXrandr: X.Org implementation of the X Window System), see their website: libXrandr: libXrandr: http://www.x.org libXrandr: PACKAGE NAME: libXrender-0.9.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: libXrender: libXrender libXrender: libXrender: libXrender is part of X11. libXrender: libXrender: For more information about the X.Org Foundation (the providers of the libXrender: X.Org implementation of the X Window System), see their website: libXrender: libXrender: http://www.x.org libXrender: PACKAGE NAME: libXres-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: libXres: libXres libXres: libXres: libXres is part of X11. libXres: libXres: For more information about the X.Org Foundation (the providers of the libXres: X.Org implementation of the X Window System), see their website: libXres: libXres: http://www.x.org libXres: PACKAGE NAME: libXt-1.0.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 455 K PACKAGE SIZE (uncompressed): 1170 K PACKAGE DESCRIPTION: libXt: libXt libXt: libXt: libXt is part of X11. libXt: libXt: For more information about the X.Org Foundation (the providers of the libXt: X.Org implementation of the X Window System), see their website: libXt: libXt: http://www.x.org libXt: PACKAGE NAME: libXtst-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXtst: libXtst libXtst: libXtst: libXtst is part of X11. libXtst: libXtst: For more information about the X.Org Foundation (the providers of the libXtst: X.Org implementation of the X Window System), see their website: libXtst: libXtst: http://www.x.org libXtst: PACKAGE NAME: libXv-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: libXv: libXv libXv: libXv: libXv is part of X11. libXv: libXv: For more information about the X.Org Foundation (the providers of the libXv: X.Org implementation of the X Window System), see their website: libXv: libXv: http://www.x.org libXv: PACKAGE NAME: libXvMC-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: libXvMC: libXvMC libXvMC: libXvMC: libXvMC is part of X11. libXvMC: libXvMC: For more information about the X.Org Foundation (the providers of the libXvMC: X.Org implementation of the X Window System), see their website: libXvMC: libXvMC: http://www.x.org libXvMC: PACKAGE NAME: libXxf86dga-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: libXxf86dga: libXxf86dga libXxf86dga: libXxf86dga: libXxf86dga is part of X11. libXxf86dga: libXxf86dga: For more information about the X.Org Foundation (the providers of the libXxf86dga: X.Org implementation of the X Window System), see their website: libXxf86dga: libXxf86dga: http://www.x.org libXxf86dga: PACKAGE NAME: libXxf86misc-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: libXxf86misc: libXxf86misc libXxf86misc: libXxf86misc: libXxf86misc is part of X11. libXxf86misc: libXxf86misc: For more information about the X.Org Foundation (the providers of the libXxf86misc: X.Org implementation of the X Window System), see their website: libXxf86misc: libXxf86misc: http://www.x.org libXxf86misc: PACKAGE NAME: libXxf86vm-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: libXxf86vm: libXxf86vm libXxf86vm: libXxf86vm: libXxf86vm is part of X11. libXxf86vm: libXxf86vm: For more information about the X.Org Foundation (the providers of the libXxf86vm: X.Org implementation of the X Window System), see their website: libXxf86vm: libXxf86vm: http://www.x.org libXxf86vm: PACKAGE NAME: libao-0.8.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 220 K PACKAGE DESCRIPTION: libao: libao (Audio Output library) libao: libao: Libao is a cross-platform audio library, and is required by many libao: programs and other libraries that use audio (some examples include libao: ogg123, GAIM, and the Ogg Vorbis libraries). This package provides libao: plugins for OSS, ESD, aRts, and ALSA. You will need to install the libao: supporting libraries for any plugins you want to use. libao: PACKAGE NAME: libart_lgpl-2.3.19-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 124 K PACKAGE SIZE (uncompressed): 420 K PACKAGE DESCRIPTION: libart_lgpl: libart_lgpl (graphics library) libart_lgpl: libart_lgpl: Libart is a library for high-performance 2D graphics. It is used by libart_lgpl: both KDE and GNOME. This is the LGPL'd component of the library. libart_lgpl: libart_lgpl: Raph Levien is the author of libart. libart_lgpl: PACKAGE NAME: libassuan-1.0.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 105 K PACKAGE SIZE (uncompressed): 320 K PACKAGE DESCRIPTION: libassuan: libassuan (Interprocess Communication Library for GPG) libassuan: libassuan: This is the IPC library used by GnuPG 2.x, GPGME and a few other libassuan: packages. libassuan: PACKAGE NAME: libcaca-0.99.beta11-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 550 K PACKAGE SIZE (uncompressed): 2430 K PACKAGE DESCRIPTION: libcaca: libcaca (Colour AsCii Art library) libcaca: libcaca: The libcaca library is a graphics library that outputs text instead libcaca: of pixels, so that it can work on older video cards or text terminals. libcaca: It is not unlike the famous AAlib library. libcaca: libcaca: Sam Hocevar is the main author of libcaca. libcaca: PACKAGE NAME: libdmx-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: libdmx: libdmx libdmx: libdmx: libdmx is part of X11. libdmx: libdmx: For more information about the X.Org Foundation (the providers of the libdmx: X.Org implementation of the X Window System), see their website: libdmx: libdmx: http://www.x.org libdmx: PACKAGE NAME: libdrm-2.3.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 80 K PACKAGE SIZE (uncompressed): 350 K PACKAGE DESCRIPTION: libdrm: libdrm (A library to support Direct Rendering) libdrm: libdrm: This library implements an interface to the kernel's DRM services. libdrm: It is used to support hardware accelerated 3-D rendering. libdrm: PACKAGE NAME: libexif-0.6.16-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 363 K PACKAGE SIZE (uncompressed): 1420 K PACKAGE DESCRIPTION: libexif: libexif libexif: libexif: EXIF stands for Exchangeable Image File Format, which is a format used libexif: to store extra information in images such as the JPEG files produced libexif: by digital cameras. The libexif library allows programs such as libexif: gthumb to parse, edit, and save EXIF data. libexif: PACKAGE NAME: libfontenc-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: libfontenc: libfontenc libfontenc: libfontenc: libfontenc is part of X11. libfontenc: libfontenc: For more information about the X.Org Foundation (the providers of the libfontenc: X.Org implementation of the X Window System), see their website: libfontenc: libfontenc: http://www.x.org libfontenc: PACKAGE NAME: libgcrypt-1.2.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 255 K PACKAGE SIZE (uncompressed): 550 K PACKAGE DESCRIPTION: libgcrypt: libgcrypt (General purpose crypto library) libgcrypt: libgcrypt: Libgcrypt is a general purpose crypto library based on the code libgcrypt: used in GnuPG. libgcrypt: PACKAGE NAME: libglade-2.6.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 136 K PACKAGE SIZE (uncompressed): 560 K PACKAGE DESCRIPTION: libglade: libglade libglade: libglade: The GLADE library allows loading user interfaces which are stored libglade: externally into a program. This allows the interface to be changed libglade: without recompiling the program. The interfaces can also be edited libglade: with GLADE. libglade: PACKAGE NAME: libgpg-error-1.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 74 K PACKAGE SIZE (uncompressed): 340 K PACKAGE DESCRIPTION: libgpg-error: libgpg-error (GnuPG Error Definitions Library) libgpg-error: libgpg-error: This is a library that defines common error values for all GnuPG libgpg-error: components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgpg-error: libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon, and more. libgpg-error: PACKAGE NAME: libgpod-0.4.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 254 K PACKAGE SIZE (uncompressed): 850 K PACKAGE DESCRIPTION: libgpod: libgpod (A library for connecting to some sort of media device ;-) libgpod: libgpod: libgpod for accessing iPod content. It provides an easy to use way libgpod: to retrieve the list of files and playlist stored on an iPod, to libgpod: modify them and to save them back to the iPod. libgpod: libgpod: If you decide to make improvements please contact us so we can work libgpod: together. Just drop a mail to: Gtkpod-devel@lists.sourceforge.net libgpod: (you may ask to be CC in the answer). libgpod: PACKAGE NAME: libgsf-1.14.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 197 K PACKAGE SIZE (uncompressed): 1090 K PACKAGE DESCRIPTION: libgsf: libgsf (structured file I/O library) libgsf: libgsf: libgsf aims to provide an efficient extensible I/O abstraction for libgsf: dealing with different structured file formats. libgsf: libgsf: libgsf is used by libwv2, which is used by various word processors libgsf: to import .doc format files. libgsf: PACKAGE NAME: libgtkhtml-2.11.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 200 K PACKAGE SIZE (uncompressed): 710 K PACKAGE DESCRIPTION: libgtkhtml: libgtkhtml libgtkhtml: libgtkhtml: GtkHTML is a lightweight HTML rendering/printing/editing engine. It libgtkhtml: was originally based on KHTMLW, part of the KDE project. libgtkhtml: libgtkhtml: libgtkhtml is used by the GIMP help browser. libgtkhtml: PACKAGE NAME: libid3tag-0.15.1b-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 77 K PACKAGE SIZE (uncompressed): 300 K PACKAGE DESCRIPTION: libid3tag: libid3tag (ID3 tag manipulation library) libid3tag: libid3tag: libid3tag is a library for reading and (eventually) writing ID3 tags, libid3tag: both ID3v1 and the various versions of ID3v2. libid3tag: libid3tag: libid3tag was written by Robert Leslie. libid3tag: PACKAGE NAME: libidl-0.8.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 250 K PACKAGE DESCRIPTION: libidl: libIDL libidl: libidl: libIDL is a library licensed under the GNU LGPL for creating trees of libidl: CORBA Interface Definition Language (IDL) files, which is a libidl: specification for defining portable interfaces. libidl: libidl: libIDL is used by SeaMonkey and the Mozilla Suite. libidl: PACKAGE NAME: libidn-0.6.10-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 356 K PACKAGE SIZE (uncompressed): 1130 K PACKAGE DESCRIPTION: libidn: libidn (GNU Internationalized Domain Name library) libidn: libidn: GNU Libidn is an implementation of the Stringprep, Punycode and IDNA libidn: specifications defined by the IETF Internationalized Domain Names libidn: (IDN) working group, used for internationalized domain names. libidn: PACKAGE NAME: libieee1284-0.2.10-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: libieee1284: libieee1284 libieee1284: libieee1284: This library is intended to be used by applications that need to libieee1284: communicate with (or at least identify) devices that are attached via libieee1284: a parallel port. For example, SANE uses it to identify scanners. libieee1284: PACKAGE NAME: libjpeg-6b-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 398 K PACKAGE SIZE (uncompressed): 1240 K PACKAGE DESCRIPTION: libjpeg: libjpeg (Independent JPEG Group's JPEG software) libjpeg: libjpeg: Software to implement JPEG image compression and decompression. JPEG libjpeg: (pronounced 'jay-peg') is a standardized compression method for libjpeg: full-color and gray-scale images. JPEG is intended for compressing libjpeg: 'real-world' scenes; cartoons and other non-realistic images are not libjpeg: its strong suit. JPEG is lossy, however, on typical images of libjpeg: real-world scenes, very good compression levels can be obtained with libjpeg: no visible change, and amazingly high compression levels are possible libjpeg: if you can tolerate a low-quality image. libjpeg: PACKAGE NAME: libkarma-0.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 68 K PACKAGE SIZE (uncompressed): 200 K PACKAGE DESCRIPTION: libkarma: libkarma (library for accessing the Rio Karma music player) libkarma: libkarma: This is a library for accessing the Rio Karma, a small media player libkarma: which supports the music formats ogg vorbis, flac, mp3, wave and wma. libkarma: libkarma: libkarma was mostly written by Frank Zschockelt. libkarma: PACKAGE NAME: libksba-1.0.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 131 K PACKAGE SIZE (uncompressed): 340 K PACKAGE DESCRIPTION: libksba: libksba (X.509 & CMS library for S/MIME and TLS) libksba: libksba: KSBA (pronounced Kasbah) is a library to make X.509 certificates as libksba: well as the CMS easily accessible by other applications. libksba: Both specifications are building blocks of S/MIME and TLS. libksba: PACKAGE NAME: liblbxutil-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: liblbxutil: liblbxutil liblbxutil: liblbxutil: liblbxutil is part of X11. liblbxutil: liblbxutil: For more information about the X.Org Foundation (the providers of the liblbxutil: X.Org implementation of the X Window System), see their website: liblbxutil: liblbxutil: http://www.x.org liblbxutil: PACKAGE NAME: libmad-0.15.1b-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 83 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: libmad: libmad (high-quality MPEG audio library) libmad: libmad: MAD (libmad) is a high-quality MPEG audio decoder. It currently libmad: supports MPEG-1 and the MPEG-2 extension to Lower Sampling libmad: Frequencies, as well as the so-called MPEG 2.5 format. All three libmad: audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are libmad: fully implemented. Because MAD provides full 24-bit PCM output, libmad: applications using MAD are able to produce high quality audio. libmad: MAD is distributed under the terms of the GPL. libmad: libmad: MAD (libmad) was written by Robert Leslie. PACKAGE NAME: libmng-1.0.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 253 K PACKAGE SIZE (uncompressed): 830 K PACKAGE DESCRIPTION: libmng: libmng (Multiple-image Network Graphics library) libmng: libmng: This is libmng, the MNG reference library. MNG (pronounced 'ming'), libmng: is short for Multiple-image Network Graphics. Designed with the same libmng: modular philosophy as PNG and by many of the same people, MNG is libmng: intended to provide a home for all of the multi-image (animation) libmng: capabilities that have no place in PNG. libmng: libmng: libmng was written by Gerard Juyn. libmng: PACKAGE NAME: libmtp-0.1.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 247 K PACKAGE SIZE (uncompressed): 1390 K PACKAGE DESCRIPTION: libmtp: libmtp (A library for MTP media devices) libmtp: libmtp: libmtp is a library that attempts to support Microsoft's Media libmtp: Transfer Protocol (MTP). It was initially based the great libptp2 libmtp: library by Mariusz Woloszyn now maintained by Marcus Meissners, and libmtp: Hubert Figuere's libgphoto2 work based on libptp2 (or is libptp2 libmtp: based on libgphoto?). It is like a master DJ has remixed all of libmtp: these tracks and then added a new API adapted for portable media libmtp: players. :-) libmtp: libmtp: For the latest info, check out: http://libmtp.sourceforge.net PACKAGE NAME: libmusicbrainz-2.1.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 107 K PACKAGE SIZE (uncompressed): 300 K PACKAGE DESCRIPTION: libmusicbrainz: libmusicbrainz (library for accessing MusicBrainz servers) libmusicbrainz: libmusicbrainz: MusicBrainz is a user-maintained community music metadatabase. libmusicbrainz: The MusicBrainz client library allows applications to make metadata libmusicbrainz: lookups to a MusicBrainz server, generate signatures from WAV files libmusicbrainz: and create CD Index Disk IDs from audio CD-ROMs. libmusicbrainz: libmusicbrainz: libmusicbrainz is licensed under the GPL. Relatable has graciously libmusicbrainz: given MusicBrainz a free license to use their TRM technology: libmusicbrainz: Acoustic fingerprint technology provided by Relatable(TM), libmusicbrainz: Copyright (c) 2000-2, Relatable LLC, All rights reserved. PACKAGE NAME: libnjb-2.2.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 338 K PACKAGE SIZE (uncompressed): 1950 K PACKAGE DESCRIPTION: libnjb: libnjb (A library for Creative Nomad related media devices) libnjb: libnjb: libnjb is a C library and API for communicating with the Creative libnjb: Nomad JukeBox and Dell DJ digital audio players under BSD, Linux, libnjb: Mac OS X, and Windows. The protocol these devices use is presumably libnjb: called PDE (Portable Digital Entertainment protocol) at Creative. libnjb: Newer devices using the Microsoft MTP (Media Transfer Protocol) libnjb: are NOT supported. libnjb: libnjb: Home page: http://libnjb.sourceforge.net libnjb: PACKAGE NAME: libogg-1.1.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 80 K PACKAGE SIZE (uncompressed): 390 K PACKAGE DESCRIPTION: libogg: libogg (Ogg Bitstream library) libogg: libogg: Libogg is a library for manipulating ogg bitstreams. It handles libogg: both making ogg bitstreams and getting packets from ogg bitstreams. libogg: libogg: libogg is needed to use the Ogg Vorbis audio format. libogg: PACKAGE NAME: liboldX-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: liboldX: liboldX liboldX: liboldX: liboldX is part of X11. liboldX: liboldX: For more information about the X.Org Foundation (the providers of the liboldX: X.Org implementation of the X Window System), see their website: liboldX: liboldX: http://www.x.org liboldX: PACKAGE NAME: libpng-1.2.18-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 503 K PACKAGE SIZE (uncompressed): 1240 K PACKAGE DESCRIPTION: libpng: libpng (Portable Network Graphics library) libpng: libpng: PNG (Portable Network Graphics) is an extensible file format for the libpng: lossless, portable, well-compressed storage of raster images. PNG libpng: provides a patent-free replacement for GIF and can also replace many libpng: common uses of TIFF. Indexed-color, grayscale, and truecolor images libpng: are supported, plus an optional alpha channel. Sample depths range libpng: from 1 to 16 bits. libpng: PACKAGE NAME: libpthread-stubs-0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 10 K PACKAGE DESCRIPTION: libpthread-stubs: libpthread-stubs libpthread-stubs: libpthread-stubs: libpthread-stubs is part of X11. libpthread-stubs: libpthread-stubs: For more information about the X.Org Foundation (the providers of the libpthread-stubs: X.Org implementation of the X Window System), see their website: libpthread-stubs: libpthread-stubs: http://www.x.org libpthread-stubs: PACKAGE NAME: librsvg-2.16.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 156 K PACKAGE SIZE (uncompressed): 500 K PACKAGE DESCRIPTION: librsvg: librsvg librsvg: librsvg: Library for handling SVG (Scalable Vector Graphics). librsvg: PACKAGE NAME: libtermcap-1.2.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: libtermcap: libtermcap libtermcap: libtermcap: This is the GNU termcap library -- a library of C functions that libtermcap: enable programs to send control strings to terminals in a way libtermcap: independent of the terminal type. Most of this package is also libtermcap: distributed with GNU Emacs, but it is available in this separate libtermcap: distribution to make it easier to install as -ltermcap. libtermcap: PACKAGE NAME: libtheora-1.0alpha7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 102 K PACKAGE SIZE (uncompressed): 260 K PACKAGE DESCRIPTION: libtheora: libtheora (Theora video codec library) libtheora: libtheora: Theora is Xiph.Org's first publicly released video codec, intended libtheora: for use within the Foundation's Ogg multimedia streaming system. libtheora: libtheora: The Theora bitstream format was frozen after the alpha3 release. This libtheora: means that files produced by the alpha3 encoder will always be libtheora: playable according to the Theora I specification. Traditionally libtheora: alpha means a proof of concept, not a production-ready release. libtheora: However the code is very robust, ready for and indeed in general use. libtheora: PACKAGE NAME: libtiff-3.8.2-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 558 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE DESCRIPTION: libtiff: libtiff (a library for reading and writing TIFF files) libtiff: libtiff: This package provides support for the Tag Image File Format (TIFF), libtiff: a widely used format for storing image data. Included is the libtiff libtiff: library (for reading and writing TIFF files), and a collection of libtiff: tools for working with TIFF images. libtiff: PACKAGE NAME: libtiff32-3.8.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 279 K PACKAGE SIZE (uncompressed): 860 K PACKAGE DESCRIPTION: libtiff32: libtiff (a library for reading and writing TIFF files) libtiff32: libtiff32: This package provides support for the Tag Image File Format (TIFF), libtiff32: a widely used format for storing image data. Included is the libtiff libtiff32: library (for reading and writing TIFF files), and a collection of libtiff32: tools for working with TIFF images. libtiff32: libtiff32: This package contains 32-bit binaries. libtiff32: PACKAGE NAME: libtool-1.5.24-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 640 K PACKAGE SIZE (uncompressed): 2510 K PACKAGE DESCRIPTION: libtool: libtool (a generic library support script) libtool: libtool: This is GNU Libtool, a generic library support script. Libtool hides libtool: the complexity of using shared libraries behind a consistent, portable libtool: interface. To use libtool, add the new generic library building libtool: commands to your Makefile, Makefile.in, or Makefile.am. See the libtool: documentation for details. libtool: libtool: You must install the "m4" package to be able to use libtool. libtool: PACKAGE NAME: libtunepimp-0.4.2-x86_64_slamd64-5.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 384 K PACKAGE SIZE (uncompressed): 1080 K PACKAGE DESCRIPTION: libtunepimp: libtunepimp (library for media tagging using MusicBrainz servers) libtunepimp: libtunepimp: The TunePimp library is a MusicBrainz enabled tagging library that libtunepimp: allows music files to be looked up. Once the files have been libtunepimp: identified, libtunepimp writes new metadata tags to the music files libtunepimp: and then writes the files to a standardized directory hierarchy. libtunepimp: libtunepimp: libmusicbrainz and libtunepimp are used by various media players to libtunepimp: identify and tag media files. libtunepimp: PACKAGE NAME: libungif-4.1.4-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 227 K PACKAGE SIZE (uncompressed): 850 K PACKAGE DESCRIPTION: libungif: libungif (GIF image format library) libungif: libungif: A library to load and save (uncompressed only) images using GIF, libungif: or Graphics Interchange Format. GIF was introduced by CompuServe libungif: in 1987, but is still widely used today (especially on web pages.) libungif: PACKAGE NAME: libusb-0.1.12-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 132 K PACKAGE SIZE (uncompressed): 640 K PACKAGE DESCRIPTION: libusb: libusb (USB library) libusb: libusb: This is libusb, a library which allows userspace application access libusb: to USB devices. It is used to connect to USB devices like scanners. libusb: PACKAGE NAME: libvisual-0.4.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 158 K PACKAGE SIZE (uncompressed): 570 K PACKAGE DESCRIPTION: libvisual: libvisual (audio visualization library) libvisual: libvisual: Libvisual is an audio visualization library that acts as a middle libvisual: layer between audio visualization plugins and applications. Any libvisual: application written with libvisual support included will be able to libvisual: make use of all the plugins that are written for libvisual. libvisual: Libvisual also contains a whole set of facilities to ease the libvisual: development of plugins. libvisual: libvisual: Libvisual was written by Dennis Smit. libvisual: PACKAGE NAME: libvorbis-1.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 650 K PACKAGE SIZE (uncompressed): 5020 K PACKAGE DESCRIPTION: libvorbis: libvorbis (Ogg Vorbis library) libvorbis: libvorbis: This library supports the Vorbis General Audio Compression Codec libvorbis: (commonly known as Ogg Vorbis). Ogg Vorbis is a fully open, libvorbis: non-proprietary, patent-and-royalty-free, general-purpose compressed libvorbis: audio format for audio and music at fixed and variable bitrates. libvorbis: libvorbis: The libvorbis library requires libao and libogg. You'll find some libvorbis: basic tools for creating and using Ogg Vorbis files in the libvorbis: vorbis-tools package. libvorbis: PACKAGE NAME: libwmf-0.2.8.4-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 840 K PACKAGE SIZE (uncompressed): 1610 K PACKAGE DESCRIPTION: libwmf: libwmf (WMF graphics format library) libwmf: libwmf: libwmf is a library for interpreting metafile images and either libwmf: displaying them using X or converting them to standard formats such libwmf: as PNG, JPEG, PS, EPS and SVG. libwmf: PACKAGE NAME: libwmf-docs-0.2.8.4-noarch_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 260 K PACKAGE SIZE (uncompressed): 2320 K PACKAGE DESCRIPTION: libwmf-docs: libwmf-docs (extra documentation for libwmf) libwmf-docs: libwmf-docs: This package contains extra documentation useful for programming with libwmf-docs: the libwmf (metafile graphics format) library. libwmf-docs: PACKAGE NAME: libwpd-0.8.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 227 K PACKAGE SIZE (uncompressed): 760 K PACKAGE DESCRIPTION: libwpd: libwpd (WordPerfect document format library) libwpd: libwpd: This package contains a library (libwpd) and tools to transform libwpd: WordPerfect documents into other formats such as HTML, text, and raw. libwpd: libwpd: libwpd is used by word processors such as KWord. libwpd: PACKAGE NAME: libxcb-1.0-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 236 K PACKAGE SIZE (uncompressed): 2130 K PACKAGE DESCRIPTION: libxcb: libxcb (X protocol C-language Binding) libxcb: libxcb: The XCB library provides an interface to the X Window System protocol libxcb: which is fully capable of replacing Xlib. In fact, libX11 makes use libxcb: of libxcb as much as possible. :-) Porting to XCB has several libxcb: advantages such as a smaller memory footprint, latency hiding, direct libxcb: protocol access, and improved thread support. libxcb: PACKAGE NAME: libxkbfile-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 72 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: libxkbfile: libxkbfile libxkbfile: libxkbfile: libxkbfile is part of X11. libxkbfile: libxkbfile: For more information about the X.Org Foundation (the providers of the libxkbfile: X.Org implementation of the X Window System), see their website: libxkbfile: libxkbfile: http://www.x.org libxkbfile: PACKAGE NAME: libxkbui-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: libxkbui: libxkbui libxkbui: libxkbui: libxkbui is part of X11. libxkbui: libxkbui: For more information about the X.Org Foundation (the providers of the libxkbui: X.Org implementation of the X Window System), see their website: libxkbui: libxkbui: http://www.x.org libxkbui: PACKAGE NAME: libxml2-2.6.28-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2397 K PACKAGE SIZE (uncompressed): 11170 K PACKAGE DESCRIPTION: libxml2: libxml2 (XML parser library) libxml2: libxml2: XML parser library. libxml2: PACKAGE NAME: libxslt-1.1.20-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 673 K PACKAGE SIZE (uncompressed): 2970 K PACKAGE DESCRIPTION: libxslt: libxslt (XML transformation library) libxslt: libxslt: XSLT support for libxml2. (XSLT is a language used for transforming libxslt: XML documents) libxslt: PACKAGE NAME: lilo-22.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 303 K PACKAGE SIZE (uncompressed): 850 K PACKAGE DESCRIPTION: lilo: lilo (Linux Loader) lilo: lilo: Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger. lilo: LILO boots Linux from your hard drive. It can also boot other lilo: operating systems such as MS-DOS and OS/2, and can even boot DOS from lilo: the second hard drive. LILO comes with utilities and documentation lilo: that make it easier to install, such as 'liloconfig' and 'QuickStart'. lilo: NOTE: Installing boot loaders is inherently dangerous. Be sure to have lilo: some means to boot your system from a different media if you install lilo: LILO on your hard disk. lilo: PACKAGE NAME: links-2.1pre28-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2075 K PACKAGE SIZE (uncompressed): 3420 K PACKAGE DESCRIPTION: links: links (WWW browser for the console) links: links: Links is a console mode WWW browser, supporting colors, correct table links: rendering, background downloading, frames, Javascript, and a menu links: driven configuration interface. The default is text output, but links: graphical output (using -g) is also supported using the Linux links: framebuffer console or SVGAlib. links: links: links was written by Mikulas Patocka. links: PACKAGE NAME: linux-faqs-20060228-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/f PACKAGE SIZE (compressed): 339 K PACKAGE SIZE (uncompressed): 1100 K PACKAGE DESCRIPTION: linux-faqs: linux-faqs (Linux FAQ collection from ibiblio.org) linux-faqs: linux-faqs: Frequently Asked Questions (and answers!) on many Linux topics. linux-faqs: linux-faqs: Some of the FAQs included in this package: linux-faqs: ATAPI-FAQ, AfterStep-FAQ, BLFAQ (Brief Linux FAQ), Ftape-FAQ, linux-faqs: GCC-SIG11-FAQ, Joe-Command-Reference, the Linux-FAQ, PPP-FAQ, SMP-FAQ, linux-faqs: and the Threads-FAQ. linux-faqs: linux-faqs: These FAQs will be installed under /usr/doc/Linux-FAQs/. linux-faqs: PACKAGE NAME: linux-howtos-20070609-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/f PACKAGE SIZE (compressed): 8644 K PACKAGE SIZE (uncompressed): 31450 K PACKAGE DESCRIPTION: linux-howtos: linux-howtos (HOWTOs from the Linux Documentation Project) linux-howtos: linux-howtos: Documentation on many tasks relating to Linux setup and operation. linux-howtos: linux-howtos: These documents will be installed in /usr/doc/Linux-HOWTOs/. linux-howtos: PACKAGE NAME: linux32-1.0-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: linux32: linux32 linux32: This fools programs into thinking that they're running in a 32-bit environment. Handy linux32: for games. linux32: PACKAGE NAME: linuxdoc-tools-0.9.21-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 6448 K PACKAGE SIZE (uncompressed): 32100 K PACKAGE DESCRIPTION: linuxdoc-tools: linuxdoc-tools (utilities for working with DocBook and SGML) linuxdoc-tools: linuxdoc-tools: SGML stands for Standard Generalized Markup Language. This is a linuxdoc-tools: system which allows you to produce LaTeX, HTML, GNU info, LyX, RTF, linuxdoc-tools: and plain text (via groff) from a single source file in SGML. It is linuxdoc-tools: often used for technical software documentation, such as the Linux linuxdoc-tools: HOWTO documents. linuxdoc-tools: linuxdoc-tools: This package includes everything you need to use SGML -- all of the linuxdoc-tools: standard SGML tools; OpenJade; tools for working with DocBook linuxdoc-tools: documents (various DTDs); xmlto and AsciiDoc. PACKAGE NAME: listres-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: listres: listres listres: listres: listres is part of X11. listres: listres: For more information about the X.Org Foundation (the providers of the listres: X.Org implementation of the X Window System), see their website: listres: listres: http://www.x.org listres: PACKAGE NAME: lm_sensors-2.10.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 320 K PACKAGE SIZE (uncompressed): 1300 K PACKAGE DESCRIPTION: lm_sensors: lm_sensors (hardware monitoring package) lm_sensors: lm_sensors: lm_sensors provides tools for monitoring the temperatures, voltages, lm_sensors: and fans of Linux systems with hardware monitoring devices. Included lm_sensors: are text-based tools for sensor reporting, and a library for sensors lm_sensors: access called libsensors. It also contains tools for sensor hardware lm_sensors: identification and I2C bus probing. lm_sensors: lm_sensors: IMPORTANT NOTE: If you have a Thinkpad, please read the warnings in lm_sensors: the README.thinkpad file. lm_sensors has been known to cause damage lm_sensors: to some Thinkpads. PACKAGE NAME: lndir-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: lndir: lndir lndir: lndir: lndir is part of X11. lndir: lndir: For more information about the X.Org Foundation (the providers of the lndir: X.Org implementation of the X Window System), see their website: lndir: lndir: http://www.x.org lndir: PACKAGE NAME: logrotate-3.7.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: logrotate: logrotate (system log rotation tool) logrotate: logrotate: The logrotate utility is designed to simplify the administration logrotate: of log files on a system which generates a lot of log files. logrotate: Logrotate allows for the automatic rotation compression, removal logrotate: and mailing of log files. Logrotate can be set to handle a log logrotate: file daily, weekly, monthly or when the log file gets to a certain logrotate: size. Normally, logrotate runs as a daily cron job. logrotate: PACKAGE NAME: lsof-4.78-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 314 K PACKAGE SIZE (uncompressed): 860 K PACKAGE DESCRIPTION: lsof: lsof (list open files) lsof: lsof: Lsof is a Unix-specific tool. Its name stands for "LiSt Open Files", lsof: and it does just that. It lists information about files that are open lsof: by the processes running on the system. lsof: lsof: Victor A. Abell of Purdue University is the developer of lsof. lsof: PACKAGE NAME: lsscsi-0.19-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: lsscsi: lsscsi (list SCSI devices or hosts, and their attributes) lsscsi: lsscsi: Uses information in sysfs to list scsi devices (or hosts) currently lsscsi: attached to the system. Options can be used to control the amount lsscsi: and form of information provided for each device. lsscsi: lsscsi: lsscsi was written by Doug Gilbert. lsscsi: PACKAGE NAME: luit-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: luit: luit luit: luit: luit is part of X11. luit: luit: For more information about the X.Org Foundation (the providers of the luit: X.Org implementation of the X Window System), see their website: luit: luit: http://www.x.org luit: PACKAGE NAME: lvm2-2.02.09-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 763 K PACKAGE SIZE (uncompressed): 1730 K PACKAGE DESCRIPTION: lvm2: lvm2 (Logical Volume Manager version 2) lvm2: lvm2: Heinz Mauelshagen's LVM (Logical Volume Manager) for Linux. lvm2: LVM adds an additional layer between the physical peripherals and the lvm2: low-level I/O interface to get a logical view of disks. This allows lvm2: the concatenation of several disks (so-called physical volumes or PVs) lvm2: to form a storage pool (so-called Volume Group or VG) with allocation lvm2: units called physical extents (called PE). With LVM, you can extend, lvm2: resize, or relocate storage dynamically. lvm2: PACKAGE NAME: lynx-2.8.6rel.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2094 K PACKAGE SIZE (uncompressed): 4920 K PACKAGE DESCRIPTION: lynx: Lynx (text mode browser) lynx: lynx: Lynx is a distributed hypertext browser with full World Wide Web lynx: capabilities. Lynx can be used to access information on the World lynx: Wide Web, or to build information systems intended primarily for local lynx: access. For example, Lynx has been used to build several Campus Wide lynx: Information Systems (CWIS). lynx: lynx: Lynx's authors include Lou Montulli, Garrett Blythe, Craig Lavender, lynx: Michael Grobe, and Charles Rezac. lynx: PACKAGE NAME: lzo-2.02-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 81 K PACKAGE SIZE (uncompressed): 340 K PACKAGE DESCRIPTION: lzo: lzo (LZO Compression Library) lzo: lzo: LZO is a portable lossless data compression library written in ANSI C. lzo: It offers pretty fast compression and very fast decompression. lzo: lzo: Homepage: http://www.oberhumer.com/opensource/lzo/ lzo: PACKAGE NAME: m4-1.4.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 188 K PACKAGE SIZE (uncompressed): 380 K PACKAGE DESCRIPTION: m4: m4 (an implementation of the UNIX macro processor) m4: m4: This is GNU m4, a program which copies its input to the output, m4: expanding macros as it goes. m4 has built-in functions for including m4: named files, running commands, doing integer arithmetic, manipulating m4: text in various ways, recursion, etc... Macros can also be user- m4: defined, and can take any number of arguments. m4: m4: GNU 'm4' was originally written by Rene Seindal, from Denmark. m4: PACKAGE NAME: madplay-0.15.2b-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 69 K PACKAGE SIZE (uncompressed): 200 K PACKAGE DESCRIPTION: madplay: madplay (MPEG audio decoder and player) madplay: madplay: madplay is a command-line MPEG audio decoder and player based on the madplay: MAD library (libmad). For details about MAD, see the libmad package madplay: distributed separately. madplay: madplay: madplay was written by Robert Leslie. madplay: PACKAGE NAME: mailx-12.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 250 K PACKAGE SIZE (uncompressed): 500 K PACKAGE DESCRIPTION: mailx: mailx (a simple mail client) mailx: mailx: Mailx is derived from Berkeley Mail and is intended provide the mailx: functionality of the POSIX mailx command with additional support mailx: for MIME, IMAP, POP3, SMTP, and S/MIME. It provides enhanced mailx: features for interactive use, such as caching and disconnected mailx: operation for IMAP, message threading, scoring, and filtering. mailx: It is also usable as a mail batch language, both for sending mailx: and receiving mail. mailx: mailx: The maintainer and primary developer of nail is Gunnar Ritter. PACKAGE NAME: make-3.81-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 497 K PACKAGE SIZE (uncompressed): 1180 K PACKAGE DESCRIPTION: make: make (GNU make utility to maintain groups of programs) make: make: This is the GNU implementation of make, which was written by Richard make: Stallman and Roland McGrath. The purpose of the make utility is to make: determine automatically which pieces of a large program need to be make: recompiled, and issue the commands to recompile them. make: make: This is needed to compile just about any major C program, including make: the Linux kernel. make: PACKAGE NAME: makedepend-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: makedepend: makedepend makedepend: makedepend: makedepend is part of X11. makedepend: makedepend: For more information about the X.Org Foundation (the providers of the makedepend: X.Org implementation of the X Window System), see their website: makedepend: makedepend: http://www.x.org makedepend: PACKAGE NAME: man-1.6c-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 222 K PACKAGE SIZE (uncompressed): 530 K PACKAGE DESCRIPTION: man: man (format and display the on-line manual pages) man: man: The man package is a collection of tools used for searching and man: reading the online system documentation. In fact, on most UNIX-like man: operating systems it is the primary means of finding out how programs man: on the system work. For example, 'man man' will display the man: documentation for man itself. man: man: Man requires the groff text processing package. man: PACKAGE NAME: man-pages-2.55-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 1883 K PACKAGE SIZE (uncompressed): 4150 K PACKAGE DESCRIPTION: man-pages: man-pages (system documentation) man-pages: man-pages: Man pages are online documentation for Linux. This package includes man-pages: many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux. man-pages: man-pages: The man-pages distribution is maintained by Andries E. Brouwer with man-pages: the help of more writers, editors, and other contributors than we can man-pages: name here. man-pages: PACKAGE NAME: mc-4.6.1_20070309-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 2018 K PACKAGE SIZE (uncompressed): 5190 K PACKAGE DESCRIPTION: mc: mc (Midnight Commander file manager) mc: mc: The Midnight Commander is a Norton Commander clone, a program that mc: manipulates and manages files and directories. Useful, fast, and has mc: color displays on the Linux console. Mouse support is provided mc: through the gpm mouse server. This is a lightweight compilation of mc: mc for use on the text console or in an xterm. mc: mc: mc was written by Miguel de Icaza and Mauricio Plaza. mc: PACKAGE NAME: mcabber-0.9.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 219 K PACKAGE SIZE (uncompressed): 710 K PACKAGE DESCRIPTION: mcabber: mcabber (Jabber console client) mcabber: mcabber: mcabber is a small Jabber console client for Linux, maintained by mcabber: Mikael Berthe. Mcabber includes features such as SSL support, mcabber: multi-user chat (MUC), history logging, commands completion, and mcabber: external actions triggers. mcabber: mcabber: mcabber project home is: http://www.lilotux.net/~mikael/mcabber/ mcabber: PACKAGE NAME: mcs-0.4.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: mcs: mcs (A library for managing configuration settings) mcs: mcs: mcs is a library and set of userland tools which abstract the mcs: storage of configuration settings away from userland applications. mcs: mcs: It is hoped that by using mcs, that the applications which use it mcs: will generally have a more congruent feeling in regards to settings. mcs: mcs: Because mcs is licenced under the BSD license, it is hoped that mcs: many applications will adopt its use. mcs: PACKAGE NAME: mdadm-2.6.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 408 K PACKAGE SIZE (uncompressed): 880 K PACKAGE DESCRIPTION: mdadm: mdadm (manage RAID arrays) mdadm: mdadm: mdadm is a utility program for creating, managing, and monitoring mdadm: Linux MD (Software RAID) devices. Unlike the older raidtools mdadm: package, mdadm is a single program (which should make it easier to mdadm: use). mdadm: mdadm: mdadm was written by Neil Brown. Development of mdadm is sponsored mdadm: by CSE@UNSW (The School of Computer Science and Engineering at mdadm: The University of New South Wales). mdadm: PACKAGE NAME: mercurial-0.9.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 604 K PACKAGE SIZE (uncompressed): 2140 K PACKAGE DESCRIPTION: mercurial: mercurial (a distributed source management system) mercurial: mercurial: Mercurial is a cross-platform, distributed source management tool for mercurial: software developers. It is written in Python, with a binary diff mercurial: implementation written in C. Its major features include high- mercurial: performance; serverless, fully distributed collaborative development; mercurial: robust handling of both plain text and binary files; advanced mercurial: branching and merging capabilities; and full source code available mercurial: under the terms of the LGPL. mercurial: mercurial: Mercurial was written by Matt Mackall and other contributors. PACKAGE NAME: mesa-7.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10231 K PACKAGE SIZE (uncompressed): 30750 K PACKAGE DESCRIPTION: mesa: mesa (a 3-D graphics library) mesa: mesa: Mesa is a 3-D graphics library with an API very similar to that of mesa: another well-known 3-D graphics library. :-) The Mesa libraries are mesa: used by X to provide both software and hardware accelerated graphics. mesa: mesa: Mesa was written by Brian Paul. mesa: PACKAGE NAME: mesa32-7.0.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 8807 K PACKAGE SIZE (uncompressed): 27470 K PACKAGE DESCRIPTION: mesa32: mesa32 (a 32-bit 3-D graphics library) mesa32: mesa32: Mesa is a 3-D graphics library with an API very similar to that of mesa32: another well-known 3-D graphics library. :-) The Mesa libraries are mesa32: used by X to provide both software and hardware accelerated graphics. mesa32: mesa32: Mesa was written by Brian Paul. mesa32: mesa32: This package contains 32-bit binaries of mesa. For 64-bit binaries, mesa32: install the "mesa" package from x/. mesa32: PACKAGE NAME: metamail-2.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 156 K PACKAGE SIZE (uncompressed): 460 K PACKAGE DESCRIPTION: metamail: metamail (MIME extensions for mail) metamail: metamail: Metamail is an implementation of MIME, the Multipurpose Internet metamail: Mail Extensions, a proposed standard for multimedia mail on the metamail: Internet. Metamail implements MIME, and also implements extensibility metamail: and configuration via the "mailcap" mechanism described in an metamail: informational RFC that is a companion to the MIME document. metamail: PACKAGE NAME: mhash-0.9.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 220 K PACKAGE SIZE (uncompressed): 500 K PACKAGE DESCRIPTION: mhash: mhash (Thread-safe hash library) mhash: mhash: mhash is a thread-safe hash library, implemented in C, and provides a mhash: uniform interface to a large number of hash algorithms (MD5, SHA-1, mhash: HAVAL, RIPEMD128, RIPEMD160, TIGER, GOST). These algorithms can be mhash: used to compute checksums, message digests, and other signatures. mhash: The HMAC support implements the basics for message authentication, mhash: following RFC 2104. mhash: PACKAGE NAME: minicom-2.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 375 K PACKAGE SIZE (uncompressed): 960 K PACKAGE DESCRIPTION: minicom: minicom (communications package) minicom: minicom: Minicom - a full featured menu-driven communications package similar minicom: to the DOS program 'Telix'. Also includes sz/rz - utilities used to minicom: upload and download files using the Zmodem protocol. minicom: PACKAGE NAME: mkcomposecache-1.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: mkcomposecache: mkcomposecache mkcomposecache: mkcomposecache: mkcomposecache is part of X11. mkcomposecache: mkcomposecache: For more information about the X.Org Foundation (the providers of the mkcomposecache: X.Org implementation of the X Window System), see their website: mkcomposecache: mkcomposecache: http://www.x.org mkcomposecache: PACKAGE NAME: mkfontdir-1.0.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: mkfontdir: mkfontdir mkfontdir: mkfontdir: mkfontdir is part of X11. mkfontdir: mkfontdir: For more information about the X.Org Foundation (the providers of the mkfontdir: X.Org implementation of the X Window System), see their website: mkfontdir: mkfontdir: http://www.x.org mkfontdir: PACKAGE NAME: mkfontscale-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: mkfontscale: mkfontscale mkfontscale: mkfontscale: mkfontscale is part of X11. mkfontscale: mkfontscale: For more information about the X.Org Foundation (the providers of the mkfontscale: X.Org implementation of the X Window System), see their website: mkfontscale: mkfontscale: http://www.x.org mkfontscale: PACKAGE NAME: mkinitrd-1.1.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 412 K PACKAGE SIZE (uncompressed): 460 K PACKAGE DESCRIPTION: mkinitrd: mkinitrd (make an initial ramdisk) mkinitrd: mkinitrd: mkinitrd is a script to create an initial ramdisk that is loaded at mkinitrd: the same time as the kernel. The initial ramdisk may be responsible mkinitrd: for loading kernel modules (such a filesystem or SCSI controller mkinitrd: module) that are needed to mount the root filesystem. mkinitrd: mkinitrd: The "initrd" is implemented as an initramfs. See the kernel mkinitrd: documentation for more information on this, if you are interested. mkinitrd: PACKAGE NAME: mm-1.4.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 37 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: mm: mm (Shared Memory Allocation library) mm: mm: OSSP mm is a 2-layer abstraction library which simplifies the usage of mm: shared memory between forked processes. On the first layer it hides mm: all platform dependent implementation details (allocation and locking) mm: when dealing with shared memory segments and on the second layer it mm: provides a high-level malloc(3)-style API to work with data inside mm: those shared memory segments. Apache, PHP, and other projects use mm. mm: mm: The mm library was written by Ralf S. Engelschall. mm: PACKAGE NAME: module-init-tools-3.2.2-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 429 K PACKAGE SIZE (uncompressed): 1030 K PACKAGE DESCRIPTION: module-init-tools: module-init-tools (kernel module utilities) module-init-tools: module-init-tools: Utilities to load and unload kernel modules. These are used on Linux module-init-tools: to load extra drivers or other features into the running kernel. module-init-tools: PACKAGE NAME: most-4.10.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 48 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: most: most (another pager, like 'more' and 'less') most: most: most is a paging program that displays, one windowful at a time, the most: contents of a file on a terminal. Unlike other well-known paging most: programs, most supports multiple windows and can scroll left and most: right. Why settle for less? most: most: 'most' was written by John E. Davis. most: PACKAGE NAME: mozilla-firefox-2.0.0.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 13909 K PACKAGE SIZE (uncompressed): 54930 K PACKAGE DESCRIPTION: mozilla-firefox: mozilla-firefox (Mozilla Firefox Web browser) mozilla-firefox: mozilla-firefox: This project is a redesign of the Mozilla browser component written mozilla-firefox: using the XUL user interface language. Firefox empowers you to mozilla-firefox: browse faster, more safely and more efficiently than with any other mozilla-firefox: browser. mozilla-firefox: mozilla-firefox: Visit the Mozilla Firefox project online: mozilla-firefox: http://www.mozilla.org/projects/firefox/ mozilla-firefox: PACKAGE NAME: mozilla-thunderbird-2.0.0.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 15745 K PACKAGE SIZE (uncompressed): 63490 K PACKAGE DESCRIPTION: mozilla-thunderbird: mozilla-thunderbird (Mozilla Thunderbird mail application) mozilla-thunderbird: mozilla-thunderbird: Mozilla Thunderbird is a redesign of the Mozilla mail component mozilla-thunderbird: written using the XUL user interface language. Thunderbird makes mozilla-thunderbird: emailing safer, faster, and easier than ever before with the mozilla-thunderbird: industry's best implementations of features such as intelligent spam mozilla-thunderbird: filters, built-in RSS reader, quick search, and much more. mozilla-thunderbird: mozilla-thunderbird: Visit the Mozilla Thunderbird project online: mozilla-thunderbird: http://www.mozilla.org/projects/thunderbird/ mozilla-thunderbird: PACKAGE NAME: mpfr-2.2.1p01-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 324 K PACKAGE SIZE (uncompressed): 1000 K PACKAGE DESCRIPTION: mpfr: mpfr (Multiple-Precision Floating-Point Reliable Library) mpfr: mpfr: The MPFR library is a C library for multiple-precision floating-point mpfr: computations with exact rounding (also called correct rounding). mpfr: It is based on the GMP multiple-precision library. mpfr: The main goal of MPFR is to provide a library for multiple-precision mpfr: floating-point computation which is both efficient and has mpfr: well-defined semantics. It copies the good ideas from the mpfr: ANSI/IEEE-754 standard for double-precision floating-point arithmetic mpfr: (53-bit mantissa). mpfr: PACKAGE NAME: mpg321-0.2.10-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: mpg321: mpg321 (a command-line mp3 player) mpg321: mpg321: mpg321 is a free command-line mp3 player, which uses the mad audio mpg321: decoding library. mpg321 is written to be a drop-in replacement for mpg321: the mpg123 player for front-ends such as gqmpeg and programs which use mpg321: mpg123 to decode mp3 files (like gtoaster, and other CD-recording mpg321: software). mpg321: mpg321: mpg321 requires libao.so from the oggutils package. mpg321: PACKAGE NAME: mt-st-0.9b-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: mt-st: mt-st (controls magnetic tape drive operation) mt-st: mt-st: This mt originates from BSD NET-2. Some Linux SCSI tape-specific mt-st: ioctls have been added to the original source and the man page has mt-st: been updated. Although this mt program is tailored for SCSI tape, it mt-st: can also be used with the QIC-02 driver and hopefully with other Linux mt-st: tape drivers using the same ioctls (some of the commands may not work mt-st: with all drivers). mt-st: PACKAGE NAME: mtr-0.72-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 57 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: mtr: mtr (a network diagnostic tool) mtr: mtr: mtr combines the functionality of the 'traceroute' and 'ping' programs mtr: in a single network diagnostic tool. mtr: mtr: Matt Kimball wrote most of mtr, and mtr is currently maintained by mtr: Roger Wolff. mtr: mtr: mtr has a home page: http://www.bitwizard.nl/mtr/ mtr: PACKAGE NAME: mtx-1.3.9-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 97 K PACKAGE SIZE (uncompressed): 230 K PACKAGE DESCRIPTION: mtx: mtx (Controls tape autochangers) mtx: mtx: The MTX program controls the robotic mechanism in autoloaders and mtx: tape libraries such as the HP SureStore DAT 40x6, Exabyte EZ-17, and mtx: Exabyte 220. mtx: mtx: This program is also reported to work with a variety of other tape mtx: libraries and autochangers from Tandberg/Overland, Breece Hill, HP, mtx: Seagate, Dell and Quantum. mtx: PACKAGE NAME: mutt-1.4.2.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1124 K PACKAGE SIZE (uncompressed): 2910 K PACKAGE DESCRIPTION: mutt: The mutt mail client. mutt: mutt: Mutt is a small but very powerful text-based MIME mail client. Mutt mutt: is highly configurable, and is well suited to the mail power user with mutt: advanced features like key bindings, keyboard macros, mail threading, mutt: regular expression searches and a powerful pattern matching language mutt: for selecting groups of messages. mutt: PACKAGE NAME: mysql-5.0.37-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 16801 K PACKAGE SIZE (uncompressed): 35800 K PACKAGE DESCRIPTION: mysql: mysql (SQL-based relational database server) mysql: mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL mysql: (Structured Query Language) database server. It comes with a nice API mysql: which makes it easy to integrate into other applications. mysql: mysql: The home page for MySQL is http://www.mysql.com/ mysql: PACKAGE NAME: nano-2.0.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 439 K PACKAGE SIZE (uncompressed): 1230 K PACKAGE DESCRIPTION: nano: nano (Nano's ANOther editor, an enhanced free Pico clone) nano: nano: nano is a small, free, and friendly editor from the GNU project. It nano: aims to copy Pico's look and feel while providing additional (or nano: disabled by default) features that are missing from Pico, such as nano: "search and replace" or "go to line and column number". nano: nano: Chris Allegretta is Nano's author. nano: PACKAGE NAME: nasm-0.98.39-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 366 K PACKAGE SIZE (uncompressed): 760 K PACKAGE DESCRIPTION: nasm: nasm (NASM assembler) nasm: nasm: NASM is the Netwide Assembler, a free portable assembler for the Intel nasm: 80x86 microprocessor series, using primarily the traditional Intel nasm: instruction mnemonics and syntax. nasm: nasm: NASM was written by Simon Tatham and Julian Hall. nasm: PACKAGE NAME: nc-1.10-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: nc: nc (Netcat network utility) nc: nc: Netcat, or "nc" as the actual program is named, is a simple utility nc: which reads and writes data across network connections, using TCP or nc: UDP protocol. It is designed to be a reliable "back-end" tool that nc: can be used directly or easily driven by other programs and scripts. nc: At the same time, it is a feature-rich network debugging and nc: exploration tool, since it can create almost any kind of connection nc: you would need and has several interesting built-in capabilities. nc: Netcat was written by *Hobbit* , and is a product nc: of Avian Research. PACKAGE NAME: ncftp-3.2.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 530 K PACKAGE SIZE (uncompressed): 1130 K PACKAGE DESCRIPTION: ncftp: ncftp ncftp: ncftp: NcFTP is a user interface to the Internet standard File Transfer ncftp: Protocol. This program allows a user to transfer files to and from a ncftp: remote network site, and offers additional features that are not found ncftp: in the standard interface for ftp. ncftp: PACKAGE NAME: ncompress-4.2.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: ncompress: ncompress (the classic *nix compression utility) ncompress: ncompress: Compress reduces the size of the named files using adaptive Lempel-Ziv ncompress: coding. Whenever possible, each file is replaced by one with the ncompress: extension .Z, while keeping the same ownership modes, access and ncompress: modification times. If no files are specified, the standard input is ncompress: compressed to the standard output. Compressed files can be restored ncompress: to their original form using uncompress or zcat. ncompress: PACKAGE NAME: ncurses-5.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2054 K PACKAGE SIZE (uncompressed): 8510 K PACKAGE DESCRIPTION: ncurses: ncurses ncurses: ncurses: The ncurses (new curses) library is a free software emulation of ncurses: curses in System V Release 4.0, and more. It uses terminfo format, ncurses: supports pads and color and multiple highlights and forms characters ncurses: and function-key mapping, and has all the other SYSV-curses ncurses: enhancements over BSD curses. ncurses: PACKAGE NAME: neon-0.25.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 178 K PACKAGE SIZE (uncompressed): 700 K PACKAGE DESCRIPTION: neon: neon (HTTP and WebDAV client library) neon: neon: neon is an HTTP and WebDAV client library, with a C language API. neon: Bindings for other languages may also be available, see the web site neon: for more details: http://www.webdav.org/neon/ neon: neon: The neon library is used by projects such as subversion. neon: PACKAGE NAME: net-snmp-5.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2252 K PACKAGE SIZE (uncompressed): 7350 K PACKAGE DESCRIPTION: net-snmp: net-snmp (Simple Network Management Protocol tools) net-snmp: net-snmp: Various tools relating to the Simple Network Management Protocol: net-snmp: net-snmp: An extensible agent net-snmp: An SNMP library net-snmp: Tools to request or set information from SNMP agents net-snmp: Tools to generate and handle SNMP traps net-snmp: A version of the unix 'netstat' command using SNMP net-snmp: A graphical Perl/Tk/SNMP based mib browser net-snmp: PACKAGE NAME: net-tools-1.60-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 183 K PACKAGE SIZE (uncompressed): 460 K PACKAGE DESCRIPTION: net-tools: net-tools (base Linux networking utilities) net-tools: net-tools: This is the core collection of tools such as "ifconfig" and "route" net-tools: used to configure networking on Linux. You won't be able to do much net-tools: networking without this package and the network-scripts. net-tools: net-tools: The net-tools package was maintained for many years by Phil Blundell net-tools: and Bernd Eckenfels. net-tools: PACKAGE NAME: netatalk-2.0.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 872 K PACKAGE SIZE (uncompressed): 2350 K PACKAGE DESCRIPTION: netatalk: netatalk (Appletalk file and print server) netatalk: netatalk: Netatalk is an Appletalk file and print server for Linux. Using netatalk: Netatalk, Macintosh computers on your local network can mount Linux netatalk: volumes as if they were standard Appletalk network drives, and can netatalk: print to the Linux box's printer as if it were a network printer netatalk: supporting PostScript. netatalk: netatalk: Netatalk was originally written by the Research Systems Unix Group at netatalk: The University of Michigan, and is maintained by the Netatalk Team. netatalk: PACKAGE NAME: netdate-bsd4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: netdate: netdate (simple network time utility) netdate: netdate: Netdate takes a list of names of Internet hosts as arguments, selects netdate: the one which supplies the best time, and sets the system time netdate: accordingly. The invoker must be the super-user for the time to be netdate: set. Protocol names (either udp or tcp) may be interspersed with the netdate: host names, and determine the protocol which will be used to connect netdate: to the hosts whose names follow, up to the next protocol name or the netdate: end of the arguments. The default protocol is udp. netdate: netdate: These days, "ntpdate" is probably a better choice. PACKAGE NAME: netkit-bootparamd-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: netkit-bootparamd: netkit-bootparamd (boot parameter server) netkit-bootparamd: netkit-bootparamd: This package provides rpc.bootparamd and callbootd, programs used to netkit-bootparamd: provide information to diskless clients so they can boot. It is netkit-bootparamd: used primarily to allow a Linux server to boot a Sun machine using netkit-bootparamd: SunOS bootparam. netkit-bootparamd: netkit-bootparamd: netkit-bootparamd was written by Klas Heggemann. netkit-bootparamd: PACKAGE NAME: netkit-ftp-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: netkit-ftp: netkit-ftp (the old BSD FTP client) netkit-ftp: netkit-ftp: Ftp is the user interface to the Internet standard File Transfer netkit-ftp: Protocol. The program allows a user to transfer files to and from a netkit-ftp: remote network site. netkit-ftp: netkit-ftp: This is a program of mostly historical value. For a more powerful netkit-ftp: command-line FTP client, look at something like lftp. netkit-ftp: PACKAGE NAME: netkit-ntalk-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: netkit-ntalk: netkit-ntalk (talk client and talkd daemon) netkit-ntalk: netkit-ntalk: talk and talkd are the BSD communication client server system for netkit-ntalk: the command line. "talk" is the client that asks another user to netkit-ntalk: respond; and "in.talkd" is the server that notifies a user that netkit-ntalk: someone else wants to initiate a conversation. netkit-ntalk: netkit-ntalk: The talk command appeared in 4.2BSD. netkit-ntalk: PACKAGE NAME: netkit-routed-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: netkit-routed: netkit-routed (dynamic network routing daemon) netkit-routed: netkit-routed: Routed is invoked at boot time to manage the network routing tables. netkit-routed: The routing daemon uses a variant of the Xerox NS Routing Information netkit-routed: Protocol in maintaining up to date kernel routing table entries. netkit-routed: It used a generalized protocol capable of use with multiple address netkit-routed: types, but is currently used only for Internet routing within a netkit-routed: cluster of networks. netkit-routed: netkit-routed: Fair warning: routed is no longer maintained and may be insecure. netkit-routed: PACKAGE NAME: netkit-rsh-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: netkit-rsh: netket-rsh (the BSD rsh/rcp/rlogin clients and daemon) netkit-rsh: netkit-rsh: The old BSD rsh suite. Note that none of these programs provide netkit-rsh: encryption or strong authentication of network connections. As such, netkit-rsh: their use is discouraged. The "ssh" protocol and package is a netkit-rsh: cryptographically secure replacement. netkit-rsh: PACKAGE NAME: netkit-rusers-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: netkit-rusers: netkit-rusers (show users logged in to machines on local network) netkit-rusers: netkit-rusers: The rusers command produces output similar to who, but for the list netkit-rusers: of hosts or all machines on the local network. For each host netkit-rusers: responding to the rusers query, the hostname with the names of the netkit-rusers: users currently logged on is printed on each line. The rusers netkit-rusers: command will wait for one minute to catch late responders. netkit-rusers: netkit-rusers: Portmap and rpc.rusersd must be running on remote machines. Should netkit-rusers: probably be considered insecure (or at least ill-advised) on public netkit-rusers: networks. PACKAGE NAME: netkit-rwall-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: netkit-rwall: netkit-rwall (send a message to all users) netkit-rwall: netkit-rwall: The rwall command sends a message to the users logged into the netkit-rwall: specified host. The message to be sent can be typed in and netkit-rwall: terminated with EOF or it can be in a file. netkit-rwall: netkit-rwall: Run the rpc.rwalld daemon with caution. It may be insecure. netkit-rwall: netkit-rwall: The rwall command appeared in SunOS. netkit-rwall: PACKAGE NAME: netkit-rwho-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: netkit-rwho: netkit-rwho (who is logged in on local machines) netkit-rwho: netkit-rwho: The rwho command produces output similar to who, but for all machines netkit-rwho: on the local network. If no report has been received from a machine netkit-rwho: for 11 minutes then rwho assumes the machine is down, and does not netkit-rwho: report users last known to be logged into that machine. If a users netkit-rwho: hasn't typed to the system for a minute or more, then rwho reports netkit-rwho: this idle time. If a user hasn't typed to the system for an hour or netkit-rwho: more, then the user will be omitted from the output of rwho unless netkit-rwho: the -a flag is given. netkit-rwho: PACKAGE NAME: netkit-timed-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: netkit-timed: netkit-timed (time server daemon) netkit-timed: netkit-timed: This is an early BSD time server daemon. While ntpd is better for netkit-timed: most purposes, this might be useful for secure networks or embedded netkit-timed: systems in need of something more lightweight. netkit-timed: netkit-timed: The timed daemon appeared in 4.3BSD. netkit-timed: PACKAGE NAME: netpbm-10.35.22-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2082 K PACKAGE SIZE (uncompressed): 5940 K PACKAGE DESCRIPTION: netpbm: netpbm (graphics conversion utilities) netpbm: netpbm: The netpbm package contains a library and tools for converting between netpbm: many different graphics formats. netpbm: PACKAGE NAME: netpipes-4.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 80 K PACKAGE SIZE (uncompressed): 230 K PACKAGE DESCRIPTION: netpipes: netpipes netpipes: netpipes: Robert Forsman's netpipes package makes TCP/IP streams usable in shell netpipes: scripts. It can also simplify client/server code by allowing the netpipes: programmer to skip all the tedious programming bits related to sockets netpipes: and concentrate on writing a filter/service. Here's an example of netpipes: what you can do with 'faucet' and 'hose', two netpipes commands: netpipes: netpipes: server$ faucet 3000 -out tar cf - . netpipes: client$ hose server 3000 -in tar xvf - netpipes: PACKAGE NAME: netwatch-1.0a-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 116 K PACKAGE SIZE (uncompressed): 350 K PACKAGE DESCRIPTION: netwatch: netwatch netwatch: netwatch: Netwatch allows a user (superuser) to monitor activity on the network. netwatch: The monitor includes statistics on transmitted and received packets, netwatch: bytes, protocol, and more. netwatch: PACKAGE NAME: network-scripts-12.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: network-scripts: network-scripts (Scripts to configure a network) network-scripts: network-scripts: These are the basic scripts and files used to define a network and network-scripts: configure network interfaces on Linux. Most of the original network-scripts: /etc files were written by Fred N. van Kempen, or borrowed from BSD. network-scripts: The rc.inet1 and rc.inet2 scripts were mostly written by Patrick network-scripts: Volkerding, with suggestions and fixes from hundreds of contributors network-scripts: over the years. PACKAGE NAME: netwrite-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: netwrite: netwrite (in.writed daemon for accepting network "write") netwrite: netwrite: Writed implements a very simple protocol that allows a write(1) netwrite: program on one host to connect up to one on another host, allowing netwrite: communications across the network. Writed is meant to be run from netwrite: inetd(8) listening for TCP requests on port 811. No attempt is made netwrite: to determine the authenticity of users sending messages. This netwrite: program should probably not be deployed on insecure networks. netwrite: PACKAGE NAME: newspost-2.1.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: newspost: newspost (binary posting utility) newspost: newspost: Newspost is a usenet binary autoposter. It will uuencode or yencode newspost: files and post them to usenet newsgroups. In addition, it can newspost: automatically generate and post .SFV checksum files and .PAR parity newspost: files. newspost: newspost: Newspost was mostly written by Jim Faulkner, with some help from newspost: William McBrine. Portions borrowed from cksfv by Bryan Call, and newspost: parchive by Willem Monsuwe. newspost: PACKAGE NAME: nfs-utils-1.1.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 174 K PACKAGE SIZE (uncompressed): 410 K PACKAGE DESCRIPTION: nfs-utils: nfs-utils (Network File System daemons and utilities) nfs-utils: nfs-utils: The nfs-utils package contains the necessary daemons and utilities to nfs-utils: run an NFS server on Linux. nfs-utils: nfs-utils: You'll also need the portmap package to use NFS. nfs-utils: PACKAGE NAME: nmap-4.20-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 754 K PACKAGE SIZE (uncompressed): 2730 K PACKAGE DESCRIPTION: nmap: nmap (network scanner) nmap: nmap: Nmap ("Network Mapper") is an open source utility for network nmap: exploration or security auditing. It was designed to rapidly scan nmap: large networks, although it works fine against single hosts. Nmap nmap: uses raw IP packets in novel ways to determine what hosts are nmap: available on the network, what services (ports) they are offering, nmap: what operating system (and OS version) they are running, what type of nmap: packet filters/firewalls are in use, and dozens of other nmap: characteristics. Nmap runs on most types of computers, and both nmap: console and graphical versions are available. PACKAGE NAME: nn-6.7.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 334 K PACKAGE SIZE (uncompressed): 760 K PACKAGE DESCRIPTION: nn: nn (the NN newsreader) nn: nn: nn is an easy to use menu driven newsreader by Kim F. Storm. nn: nn: nn stands for "No News is good news", and the nn newsreader is nn: designed to let you minimize the amount of time you spend reading news nn: (or, more realistically, to let you to read even more newsgroups :-). nn: This version of nn reads news from a news server via NNTP, and can nn: make use of your NNTP server's NOV database. nn: PACKAGE NAME: normalize-0.7.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 64 K PACKAGE SIZE (uncompressed): 180 K PACKAGE DESCRIPTION: normalize: normalize (adjusts volume levels of audio files) normalize: normalize: normalize is a tool for adjusting the volume of audio files to a normalize: standard level. This is useful for things like creating mix CDs normalize: from mp3 collections, where different recording levels on normalize: different albums can cause the volume to vary greatly from song normalize: to song. The package also contains an XMMS plugin. normalize: normalize: Chris Vaill is the author of normalize. normalize: PACKAGE NAME: nspluginwrapper-0.9.91.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 82 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: nspluginwrapper: NSPluginWrapper nspluginwrapper: This package provides support for using 32-bit plugins in nspluginwrapper: 64-bit web browsers. nspluginwrapper: PACKAGE NAME: ntp-4.2.4p0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1505 K PACKAGE SIZE (uncompressed): 3260 K PACKAGE DESCRIPTION: ntp: ntp (Network Time Protocol daemon) ntp: ntp: The Network Time Protocol (NTP) is used to synchronize the time of a ntp: computer client or server to another server or reference time source, ntp: such as a radio or satellite receiver or modem. It provides client ntp: accuracies typically within a millisecond on LANs and up to a few tens ntp: of milliseconds on WANs relative to a primary server synchronized to ntp: Coordinated Universal Time (UTC) via a Global Positioning Service ntp: (GPS) receiver, for example. ntp: PACKAGE NAME: obexftp-0.21-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 89 K PACKAGE SIZE (uncompressed): 280 K PACKAGE DESCRIPTION: obexftp: obexftp (Access devices via ObexFTP, such as mobile phones) obexftp: obexftp: This package contains some command line tools and the ObexFTP obexftp: library. Using OpenOBEX it enables you to transfer data via IrDA, obexftp: Bluetooth, as well as some custom (Siemens, Ericsson) serial port obexftp: protocols. obexftp: obexftp: ObexFTP was written by Christian W. Zuckschwerdt. obexftp: obexftp: The project site is: http://triq.net/obexftp.html obexftp: PACKAGE NAME: oclock-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: oclock: oclock oclock: oclock: oclock is part of X11. oclock: oclock: For more information about the X.Org Foundation (the providers of the oclock: X.Org implementation of the X Window System), see their website: oclock: oclock: http://www.x.org oclock: PACKAGE NAME: openldap-client-2.3.32-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 486 K PACKAGE SIZE (uncompressed): 1160 K PACKAGE DESCRIPTION: openldap-client: openldap-client (OpenLDAP client programs) openldap-client: openldap-client: OpenLDAP is an open source implementation of the Lightweight openldap-client: Directory Access Protocol. LDAP is a alternative to the X.500 openldap-client: Directory Access Protocol (DAP). It uses the TCP/IP stack versus openldap-client: the overly complex OSI stack. openldap-client: openldap-client: LDAP is often used to provide authentication (such as for email). openldap-client: openldap-client: The OpenLDAP homepage is http://www.openldap.org/ openldap-client: PACKAGE NAME: openobex-1.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 62 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: openobex: openobex (Object Exchange protocol library) openobex: openobex: OpenOBEX is a free open source implementation of the Object Exchange openobex: (OBEX) protocol. OBEX is a session protocol and can best be openobex: described as a binary HTTP protocol. OBEX is optimised for ad-hoc openobex: wireless links and can be used to exchange all kinds of objects like openobex: files, pictures, calendar entries (vCal) and business cards (vCard). openobex: openobex: Visit the project here: http://www.openobex.org openobex: PACKAGE NAME: openssh-4.7p1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 868 K PACKAGE SIZE (uncompressed): 2010 K PACKAGE DESCRIPTION: openssh: openssh (Secure Shell daemon and clients) openssh: openssh: ssh (Secure Shell) is a program for logging into a remote machine and openssh: for executing commands on a remote machine. It is intended to replace openssh: rlogin and rsh, and provide secure encrypted communications between openssh: two untrusted hosts over an insecure network. sshd (SSH Daemon) is openssh: the daemon program for ssh. OpenSSH is based on the last free version openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and openssh: Dug Song. It has a homepage at http://www.openssh.com/ openssh: PACKAGE NAME: openssl-0.9.8e-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 3440 K PACKAGE SIZE (uncompressed): 10360 K PACKAGE DESCRIPTION: openssl: openssl (Secure Sockets Layer toolkit) openssl: openssl: The OpenSSL certificate management tool and the shared libraries that openssl: provide various encryption and decryption algorithms and protocols. openssl: openssl: This product includes software developed by the OpenSSL Project for openssl: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl: includes cryptographic software written by Eric Young openssl: (eay@cryptsoft.com). This product includes software written by Tim openssl: Hudson (tjh@cryptsoft.com). openssl: PACKAGE NAME: openssl-solibs-0.9.8e-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 864 K PACKAGE SIZE (uncompressed): 2320 K PACKAGE DESCRIPTION: openssl-solibs: openssl-solibs (OpenSSL shared libraries) openssl-solibs: openssl-solibs: These shared libraries provide encryption routines required by openssl-solibs: programs such as openssh. They are also used by KDE's Konqueror web openssl-solibs: browser to provide secure web connections. openssl-solibs: openssl-solibs: This product includes software developed by the OpenSSL Project for openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl-solibs: includes cryptographic software written by Eric Young openssl-solibs: (eay@cryptsoft.com). This product includes software written by Tim openssl-solibs: Hudson (tjh@cryptsoft.com). PACKAGE NAME: openvpn-2.0.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 322 K PACKAGE SIZE (uncompressed): 800 K PACKAGE DESCRIPTION: openvpn: openvpn (secure IP tunnel daemon) openvpn: openvpn: OpenVPN is a full-featured SSL VPN which can accomodate a wide range openvpn: of configurations, including remote access, site-to-site VPNs, WiFi openvpn: security, and enterprise-scale remote access with load balancing, openvpn: failover, and fine-grained access-controls. openvpn: openvpn: OpenVPN's home on the net is: http://openvpn.net openvpn: PACKAGE NAME: oprofile-0.9.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 997 K PACKAGE SIZE (uncompressed): 3070 K PACKAGE DESCRIPTION: oprofile: oprofile (system profiling tool) oprofile: oprofile: OProfile is a profiling system for Linux. Profiling runs oprofile: transparently in the background and profile data can be collected oprofile: at any time. OProfile makes use of the hardware performance oprofile: counters provided on Intel, AMD, and other processors, and uses a oprofile: timer-interrupt based mechanism on CPUs without counters. oprofile: OProfile can profile the whole system in high detail. oprofile: PACKAGE NAME: p2c-1.21alpha2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 296 K PACKAGE SIZE (uncompressed): 810 K PACKAGE DESCRIPTION: p2c: p2c (Pascal to C translator) p2c: p2c: P2c is a tool for translating Pascal programs into C. The input p2c: consists of a set of source files in any of the following Pascal p2c: dialects: HP Pascal, Turbo/UCSD Pascal, DEC VAX Pascal, Oregon p2c: Software Pascal/2, Macintosh Programmer's Workshop Pascal, p2c: Sun/Berkeley Pascal, Texas Instruments Pascal, Apollo Domain Pascal. p2c: Modula-2 syntax is also supported. Output is a set of .c and .h p2c: files that comprise an equivalent program in any of several dialects p2c: of C. p2c: PACKAGE NAME: pan-0.131-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1057 K PACKAGE SIZE (uncompressed): 3120 K PACKAGE DESCRIPTION: pan: pan pan: pan: This is PAN, a powerful and user-friendly USENET newsreader based on pan: GTK+2. Pan is the only Unix newsreader to score 100% on the Good pan: Net-Keeping Seal of Approval newsreader evaluations. pan: PACKAGE NAME: pango-1.16.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 621 K PACKAGE SIZE (uncompressed): 2940 K PACKAGE DESCRIPTION: pango: pango pango: pango: Pango is a library for layout and rendering of text, with an emphasis pango: on internationalization. Pango can be used anywhere that text layout pango: is needed; however, most of the work on Pango was done using the GTK+ pango: widget toolkit as a test platform. Pango forms the core of text and pango: font handling for GTK+-2. pango: PACKAGE NAME: pango32-1.16.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 295 K PACKAGE SIZE (uncompressed): 810 K PACKAGE DESCRIPTION: pango32: pango pango32: pango32: Pango is a library for layout and rendering of text, with an emphasis pango32: on internationalization. Pango can be used anywhere that text layout pango32: is needed; however, most of the work on Pango was done using the GTK+ pango32: widget toolkit as a test platform. Pango forms the core of text and pango32: font handling for GTK+-2. pango32: pango32: This package contains 32-bit binaries. pango32: PACKAGE NAME: patch-2.5.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: patch: patch (apply a diff file to an original file or files) patch: patch: Patch is a utility used to apply diffs (or patches) to files, which patch: are usually source code. patch: patch: Larry Wall wrote the original version of patch. Paul Eggert removed patch: patch's arbitrary limits; added support for binary files, setting patch: file times, and deleting files; and made it conform better to POSIX. patch: Other contributors include Wayne Davison, who added unidiff support, patch: and David MacKenzie, who added configuration and backup support. patch: PACKAGE NAME: pciutils-2.2.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 237 K PACKAGE SIZE (uncompressed): 770 K PACKAGE DESCRIPTION: pciutils: pciutils (PCI utilities) pciutils: pciutils: lspci displays detailed information about all PCI buses and devices pciutils: in the system, replacing the original /proc/pci interface. pciutils: pciutils: setpci allows reading from and writing to PCI device configuration pciutils: registers. For example, you can adjust the latency timers with it. pciutils: pciutils: See the manual pages for more details. pciutils: PACKAGE NAME: pcmciautils-014-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: pcmciautils: pcmciautils (Utilities for using PCMCIA cards with 2.6+ kernels) pcmciautils: pcmciautils: This package provides PCMCIA tools that replace the pcmcia-cs tools pcmciautils: used with the 2.4.x Linux kernel. PCMCIA cards are commonly used pcmciautils: in laptops to provide expanded capabilities such as network pcmciautils: connections, modems, increased memory, and more. pcmciautils: pcmciautils: pcmciautils: pcmciautils: PACKAGE NAME: pcre-7.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 488 K PACKAGE SIZE (uncompressed): 1670 K PACKAGE DESCRIPTION: pcre: pcre (Perl-compatible regular expression library) pcre: pcre: The PCRE library is a set of functions that implement regular pcre: expression pattern matching using the same syntax and semantics as pcre: Perl 5, with just a few differences (documented in the man page). pcre: pcre: The PCRE library is used by KDE's Konqueror browser. pcre: PACKAGE NAME: perl-5.8.8-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 13830 K PACKAGE SIZE (uncompressed): 40100 K PACKAGE DESCRIPTION: perl: perl (Practical Extraction and Report Language) perl: perl: Larry Wall's "Practical Extraction and Report Language". Perl is a perl: language optimized for scanning arbitrary text files, extracting perl: information from those text files, and printing reports based on that perl: information. It's also a good language for many system management perl: tasks. The language is intended to be practical (easy to use, perl: efficient, complete) rather than beautiful (tiny, elegant, minimal). perl: PACKAGE NAME: php-5.2.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 8055 K PACKAGE SIZE (uncompressed): 22470 K PACKAGE DESCRIPTION: php: php (HTML-embedded scripting language) php: php: PHP is an HTML-embedded scripting language. It shares syntax php: characteristics with C, Java, and Perl. The primary objective behind php: this language is to make a fast and easy-to-use scripting language php: for dynamic web sites. php: php: More information can be found online at http://www.php.net/ php: PACKAGE NAME: pidentd-3.0.19-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 50 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: pidentd: pidentd (TCP/IP IDENT protocol server) pidentd: pidentd: The identd daemon implements the IDENT protocol as specified in pidentd: RFC1413. When your machine connects to a remote system, the remote pidentd: machine may connect to your identd daemon to find out either the pidentd: user name or other information about the process that initiated pidentd: the connection. Some remote machines may choose not to allow your pidentd: connections if you do not provide access to an identd daemon. pidentd: pidentd: The pidentd daemon was written by Peter Eriksson. pidentd: PACKAGE NAME: pidgin-2.2.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 8970 K PACKAGE SIZE (uncompressed): 24700 K PACKAGE DESCRIPTION: pidgin: pidgin (GTK+ instant messaging program) pidgin: pidgin: Pidgin allows you to talk to anyone using a variety of messaging pidgin: protocols, including AIM (Oscar and TOC), ICQ, IRC, Yahoo!, MSN pidgin: Messenger, Jabber, Gadu-Gadu, Napster, and Zephyr. These protocols pidgin: are implemented using a modular, easy to use design. To use a pidgin: protocol, just load the plugin for it. pidgin: pidgin: For more info, see: http://www.pidgin.im pidgin: PACKAGE NAME: pilot-link-0.12.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 575 K PACKAGE SIZE (uncompressed): 1790 K PACKAGE DESCRIPTION: pilot-link: pilot-link pilot-link: pilot-link: This is a library for communicating with Palm Computing, Inc. Palm pilot-link: Devices as well as the Handspring Visor, TRGPro, and other devices pilot-link: which conform to this standard (PalmOS licensed devices). pilot-link: pilot-link: pilot-link is used by KPilot. pilot-link: PACKAGE NAME: pine-4.64-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 2064 K PACKAGE SIZE (uncompressed): 5140 K PACKAGE DESCRIPTION: pine: pine (a menu driven mail client) pine: pine: A menu driven user mail program. Originally based on Elm (Pine Is pine: No-longer Elm), but with many additional features that make it pine: easier to use. Also contains pilot (a simple file manager) and pine: pico (an easy to use text editor). pine: PACKAGE NAME: pinentry-0.7.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 143 K PACKAGE SIZE (uncompressed): 350 K PACKAGE DESCRIPTION: pinentry: pinentry (PIN Entry dialogs) pinentry: pinentry: This is a collection of simple PIN or passphrase entry dialogs which pinentry: utilize the Assuan protocol as described by the aegypten project. pinentry: pinentry: See http://www.gnupg.org/aegypten/ for details. pinentry: PACKAGE NAME: pkg-config-0.21-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 65 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: pkg-config: pkg-config pkg-config: pkg-config: pkg-config is a system for managing library compile/link flags pkg-config: that works with automake and autoconf. It replaces the ubiquitous pkg-config: *-config scripts you may have seen with a single tool. See the man pkg-config: page that comes with pkg-config for full documentation. pkg-config: PACKAGE NAME: pkghelpers-12.0.4-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: pkghelpers: pkghelpers (Helper script for making packages) pkghelpers: This script installs several helper functions for making pkghelpers: Slackware packages: pkghelpers: - pkghelpers_env: sets various environment variables pkghelpers: - pkghelpers_fixup: strips binaries and other standard fixes pkghelpers: - pkghelpers_makepkg: checks the package 'sanity' and makes pkghelpers: makes the package. pkghelpers: PACKAGE NAME: pkgtools-12.0.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 36 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: pkgtools: pkgtools (The Slackware package maintenance system) pkgtools: pkgtools: This package contains utilities for handling Slackware packages. pkgtools: Included are the command line utilities 'installpkg', 'removepkg', pkgtools: 'makepkg', 'explodepkg', and 'upgradepkg' that install, remove, pkgtools: build, examine, and upgrade software packages. Also included are pkgtools: 'pkgtool', a menu based program for installing packages, removing pkgtools: packages, or viewing the packages that are installed on the system, pkgtools: documentation (man pages), and a few other system admin scripts. pkgtools: PACKAGE NAME: pmake-1.111-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 130 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: pmake: pmake (BSD parallel make) pmake: pmake: This is PMake -- a parallel Make program originally written for the pmake: Sprite operating system, ported from BSD Unix. This may be useful if pmake: you're going to port software with Makefiles designed for BSD. pmake: pmake: PMake was written by Adam de Boor. pmake: PACKAGE NAME: popa3d-1.0.2-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: popa3d: popa3d (a POP3 daemon) popa3d: popa3d: popa3d is a Post Office Protocol version 3 (POP3) server. A POP3 popa3d: server operates on local mailboxes on behalf of its remote users. popa3d: Users can connect at any time to check their mailbox and fetch the popa3d: mail that has accumulated. The design goals of this POP3 server are popa3d: security, reliability, RFC compliance (slightly relaxed to work with popa3d: real-world POP3 clients), and high performance. popa3d: popa3d: The popa3d daemon was written by Solar Designer. popa3d: PACKAGE NAME: poppler-0.5.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 700 K PACKAGE SIZE (uncompressed): 2280 K PACKAGE DESCRIPTION: poppler: poppler (a library for rendering PDF documents) poppler: poppler: Poppler is a library based on the xpdf PDF viewer developed by Derek poppler: Noonburg of Glyph and Cog, LLC. Since xpdf does not provide a shared poppler: library, whenever a flaw was found potentially dozens of applications poppler: incorporating code from xpdf would have to be patched. By providing poppler: a centralized PDF library this duplicated effort will be eliminated. poppler: PACKAGE NAME: poppler-data-0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 2552 K PACKAGE SIZE (uncompressed): 7280 K PACKAGE DESCRIPTION: poppler-data: poppler-data (data files used by poppler) poppler-data: poppler-data: This package consists of encoding files for use with poppler. The poppler-data: encoding files are optional and poppler will automatically read them poppler-data: if they are present. When installed, the encoding files enables poppler-data: poppler to correctly render CJK and Cyrillic properly. While poppler poppler-data: is licensed under the GPL, these encoding files are copyright Adobe poppler-data: and licensed much more strictly, and thus distributed separately. poppler-data: PACKAGE NAME: popt-1.7-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 51 K PACKAGE SIZE (uncompressed): 200 K PACKAGE DESCRIPTION: popt: popt (command line parsing library) popt: popt: Popt is a C library for parsing command line parameters. Popt was popt: heavily influenced by the getopt() and getopt_long() functions, but it popt: improves on them by allowing more powerful argument expansion. Popt popt: can parse arbitrary argv[] style arrays and automatically set popt: variables based on command line arguments. Popt allows command line popt: arguments to be aliased via configuration files and includes utility popt: functions for parsing arbitrary strings into argv[] arrays using popt: shell-like rules. popt: PACKAGE NAME: portmap-6.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: portmap: portmap (a daemon to manage RPC connections) portmap: portmap: The portmapper (/sbin/rpc.portmap) is a network daemon used to manage portmap: connections to RPC services. Daemons that offer RPC services (such portmap: as the daemons for NFS) tell the portmapper on what port they listen. portmap: Unlike the services registered with the inetd, RPC network port portmap: numbers may change each time the system is booted. portmap: portmap: The portmapper is required to use NFS or other RPC services. portmap: PACKAGE NAME: ppp-2.4.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 499 K PACKAGE SIZE (uncompressed): 1350 K PACKAGE DESCRIPTION: ppp: ppp (Point-to-Point Protocol) ppp: ppp: The Point-to-Point Protocol (PPP) provides a method for transmitting ppp: data over serial links. It's commonly used for connecting to the ppp: Internet using a modem. This package includes the PPP daemon (pppd), ppp: which negotiates with the peer to establish the link and sets up the ppp: ppp network interface, and pppsetup, an easy-to-use utility for ppp: setting up your PPP daemon. ppp: PACKAGE NAME: printproto-1.0.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: printproto: printproto printproto: printproto: printproto is part of X11. printproto: printproto: For more information about the X.Org Foundation (the providers of the printproto: X.Org implementation of the X Window System), see their website: printproto: printproto: http://www.x.org printproto: PACKAGE NAME: procmail-3.22-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 150 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: procmail: procmail (mail processing and local delivery program) procmail: procmail: Can be used to create mail-servers, mailing lists, sort your incoming procmail: mail into separate folders/files (real convenient when subscribing to procmail: one or more mailing lists or for prioritizing your mail), preprocess procmail: your mail, start any programs upon mail arrival (e.g. to generate procmail: different chimes on your workstation for different types of mail) or procmail: selectively forward certain incoming mail automatically to someone. procmail: Procmail is required by sendmail to deliver the local mail. procmail: The author of procmail is Stephen R. van den Berg. procmail: PACKAGE NAME: procps-3.2.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 274 K PACKAGE SIZE (uncompressed): 650 K PACKAGE DESCRIPTION: procps: procps (utilities for displaying process information) procps: procps: The procps package provides the classic set of utilities used to procps: display information about the processes currently running on the procps: machine. procps: PACKAGE NAME: proftpd-1.3.0a-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 898 K PACKAGE SIZE (uncompressed): 3090 K PACKAGE DESCRIPTION: proftpd: proftpd (FTP server daemon) proftpd: proftpd: ProFTPD is the Professional File Transfer Protocol (FTP) server proftpd: daemon. ProFTPD grew out of the desire to have a secure and proftpd: configurable FTP server, and out of a significant admiration of the proftpd: Apache web server. proftpd: PACKAGE NAME: proxymngr-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: proxymngr: proxymngr proxymngr: proxymngr: proxymngr is part of X11. proxymngr: proxymngr: For more information about the X.Org Foundation (the providers of the proxymngr: X.Org implementation of the X Window System), see their website: proxymngr: proxymngr: http://www.x.org proxymngr: PACKAGE NAME: pssh-1.3.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: pssh: pssh (tools for collective remote system management) pssh: pssh: Pssh, a.k.a. "parallel ssh", are Python-written wrapper scripts for pssh: OpenSSH and rsync tools. They are useful for simultaneous control pssh: of large number of machines, using parallel ssh sessions. Included pssh: are parallel versions of ssh, scp, and rsync, as well as a parallel pssh: kill command. pssh: pssh: Pssh has been written by Brent N. Chun, and requires the python pssh: package installed. pssh: PACKAGE NAME: pth-2.0.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 280 K PACKAGE DESCRIPTION: pth: pth (GNU Portable Threads) pth: pth: Pth is a very portable POSIX/ANSI-C based library for Unix platforms pth: which provides non-preemptive priority-based scheduling for multiple pth: threads of execution (aka `multithreading') inside event-driven pth: applications. All threads run in the same address space of the pth: server application, but each thread has its own individual pth: program-counter, run-time stack, signal mask and errno variable. pth: PACKAGE NAME: python-2.5.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 14704 K PACKAGE SIZE (uncompressed): 63520 K PACKAGE DESCRIPTION: python: python (object-oriented interpreted programming language) python: python: Python is an interpreted, interactive, object-oriented programming python: language that combines remarkable power with very clear syntax. python: Python's basic power can be extended with your own modules written in python: C or C++. Python is also adaptable as an extension language for python: existing applications. python: PACKAGE NAME: qca-1.0-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 140 K PACKAGE DESCRIPTION: qca: qca (Qt Cryptographic Architecture) qca: qca: QCA aims to provide a straightforward and cross-platform crypto API, qca: using Qt datatypes and conventions. QCA separates the API from the qca: implementation, using plugins known as Providers. The advantage of qca: this model is to allow applications to avoid linking to or explicitly qca: depending on any particular cryptographic library. This allows one qca: to easily change or upgrade crypto implementations without needing qca: to recompile the application. qca: qca: QCA was written by Justin Karneges. PACKAGE NAME: qca-tls-1.0-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: qca-tls: qca-tls (SSL/TLS plugin for QCA) qca-tls: qca-tls: This is a plugin to provide SSL/TLS capability to programs that qca-tls: utilize the Qt Cryptographic Architecture (QCA). qca-tls: qca-tls: The qca-tls plugin was written by Justin Karneges. qca-tls: PACKAGE NAME: qt-3.3.8-x86_64_slamd64-7.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 16631 K PACKAGE SIZE (uncompressed): 55090 K PACKAGE DESCRIPTION: qt: Qt (a multi-platform C++ graphical user interface toolkit) qt: qt: Qt is a complete and well-developed object-oriented framework for qt: developing graphical user interface (GUI) applications using C++. qt: qt: This release is free only for development of free software for the X qt: Window System. If you use Qt for developing commercial or other qt: non-free software, you must have a professional license. Please see qt: http://www.trolltech.com/purchase.html for information on how to qt: obtain a professional license. qt: PACKAGE NAME: qt32-3.3.8-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 14614 K PACKAGE SIZE (uncompressed): 48240 K PACKAGE DESCRIPTION: qt32: Qt (a multi-platform C++ graphical user interface toolkit) qt32: qt32: Qt is a complete and well-developed object-oriented framework for qt32: developing graphical user interface (GUI) applications using C++. qt32: qt32: This release is free only for development of free software for the X qt32: Window System. If you use Qt for developing commercial or other qt32: non-free software, you must have a professional license. Please see qt32: http://www.trolltech.com/purchase.html for information on how to qt32: obtain a professional license. qt32: This package contains 32-bit binaries. PACKAGE NAME: quota-3.13-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 351 K PACKAGE SIZE (uncompressed): 850 K PACKAGE DESCRIPTION: quota: quota (Linux disk quota utilities) quota: quota: An implementation of the diskquota system for the Linux operating quota: system to keep those greedy users from gobbling up 100% of the hard quota: drive space. Works with ext2, ext3, reiserfs, and xfs filesystems. quota: This system is based on the Melbourne quota system by Robert Elz. quota: Edvard Tuinder and Marco van Wieringen ported this code to Linux. quota: Jan Kara added support for the new Linux quota format and the XFS quota: filesystem. quota: PACKAGE NAME: randrproto-1.2.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: randrproto: randrproto randrproto: randrproto: randrproto is part of X11. randrproto: randrproto: For more information about the X.Org Foundation (the providers of the randrproto: X.Org implementation of the X Window System), see their website: randrproto: randrproto: http://www.x.org randrproto: PACKAGE NAME: rcs-5.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 336 K PACKAGE SIZE (uncompressed): 690 K PACKAGE DESCRIPTION: rcs: rcs (Revision Control System) rcs: rcs: RCS, the Revision Control System, manages multiple revisions of files. rcs: rcs: RCS can store, retrieve, log, identify, and merge revisions. It is rcs: useful for files that are revised frequently, e.g. programs, rcs: documentation, graphics, and papers. rcs: PACKAGE NAME: rdesktop-1.5.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 139 K PACKAGE SIZE (uncompressed): 410 K PACKAGE DESCRIPTION: rdesktop: rdesktop (Remote Desktop Protocol client) rdesktop: rdesktop: rdesktop is a client for Remote Desktop Protocol (RDP), used in a rdesktop: number of Microsoft products including Windows NT Terminal Server, rdesktop: Windows 2000 Server, Windows XP, and Windows 2003 Server. rdesktop: rdesktop: For more information, see: http://www.rdesktop.org rdesktop: PACKAGE NAME: rdist-6.1.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 68 K PACKAGE SIZE (uncompressed): 140 K PACKAGE DESCRIPTION: rdist: rdist rdist: rdist: Rdist is a remote file distribution program. It is used to maintain rdist: identical copies of files over multiple network hosts. It preserves rdist: the owner, group, mode, and mtime of files if possible and can update rdist: programs that are executing. rdist: PACKAGE NAME: readline-5.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 405 K PACKAGE SIZE (uncompressed): 1070 K PACKAGE DESCRIPTION: readline: readline (line input library with editing features) readline: readline: The GNU Readline library provides a set of functions for use by readline: applications that allow users to edit command lines as they are typed readline: in. Both Emacs and vi editing modes are available. The Readline readline: library includes additional functions to maintain a list of previously readline: entered command lines, to recall and perhaps edit those lines, and readline: perform csh-like history expansion on previous commands. readline: PACKAGE NAME: recordproto-1.13.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: recordproto: recordproto recordproto: recordproto: recordproto is part of X11. recordproto: recordproto: For more information about the X.Org Foundation (the providers of the recordproto: X.Org implementation of the X Window System), see their website: recordproto: recordproto: http://www.x.org recordproto: PACKAGE NAME: reiserfsprogs-3.6.19-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 469 K PACKAGE SIZE (uncompressed): 990 K PACKAGE DESCRIPTION: reiserfsprogs: reiserfsprogs reiserfsprogs: reiserfsprogs: These utilities are used for Reiserfs. Reiserfs is a file system reiserfsprogs: based on balanced tree algorithms. Learn more at the home site: reiserfsprogs: http://www.namesys.com reiserfsprogs: reiserfsprogs: Reiserfs is the work of Hans Reiser and many others. See the file reiserfsprogs: /usr/doc/reiserfs*/README for full credits. reiserfsprogs: PACKAGE NAME: rendercheck-1.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: rendercheck: rendercheck rendercheck: rendercheck: rendercheck is part of X11. rendercheck: rendercheck: For more information about the X.Org Foundation (the providers of the rendercheck: X.Org implementation of the X Window System), see their website: rendercheck: rendercheck: http://www.x.org rendercheck: PACKAGE NAME: renderproto-0.9.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: renderproto: renderproto renderproto: renderproto: renderproto is part of X11. renderproto: renderproto: For more information about the X.Org Foundation (the providers of the renderproto: X.Org implementation of the X Window System), see their website: renderproto: renderproto: http://www.x.org renderproto: PACKAGE NAME: resourceproto-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: resourceproto: resourceproto resourceproto: resourceproto: resourceproto is part of X11. resourceproto: resourceproto: For more information about the X.Org Foundation (the providers of the resourceproto: X.Org implementation of the X Window System), see their website: resourceproto: resourceproto: http://www.x.org resourceproto: PACKAGE NAME: rexima-1.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: rexima: rexima (console audio mixer) rexima: rexima: Rexima is a curses-based interactive audio mixer. It can also be used rexima: from the command-line. It's designed to be small, fast, and rexima: straightforward. It also offers a command line mode so you can script rexima: mixer settings. rexima: rexima: Rexima was written by Russell Marks. rexima: PACKAGE NAME: rgb-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: rgb: rgb rgb: rgb: rgb is part of X11. rgb: rgb: For more information about the X.Org Foundation (the providers of the rgb: X.Org implementation of the X Window System), see their website: rgb: rgb: http://www.x.org rgb: PACKAGE NAME: rp-pppoe-3.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 101 K PACKAGE SIZE (uncompressed): 260 K PACKAGE DESCRIPTION: rp-pppoe: rp-pppoe (Roaring Penguin PPPoE client) rp-pppoe: rp-pppoe: PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by rp-pppoe: many ADSL Internet Service Providers. Roaring Penguin has a free rp-pppoe: client for Linux systems to connect to PPPoE service providers. rp-pppoe: rp-pppoe: The client is a user-mode program and does not require any kernel rp-pppoe: modifications. It is fully compliant with RFC 2516, the official rp-pppoe: PPPoE specification. rp-pppoe: PACKAGE NAME: rpm-4.2.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 2587 K PACKAGE SIZE (uncompressed): 6790 K PACKAGE DESCRIPTION: rpm: rpm rpm: rpm: RPM is a tool from Red Hat Software used to install and remove rpm: packages in the .rpm format. When installing RPM packages on rpm: Slackware, you may need to use the --nodeps and --force options. rpm: Before installing any binary package, it's wise to examine it to rpm: see what it's going to do, and if it will overwrite any files. You rpm: can use rpm2tgz to convert .rpm packages to .tgz packages so you rpm: can look them over. rpm: PACKAGE NAME: rpm2tgz-1.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: rpm2tgz: rpm2tgz (a tool for converting an RPM archive into a tar+gz one) rpm2tgz: rpm2tgz: Converts RPM format to Slackware's GNU tar + GNU zip format. (view rpm2tgz: converted packages with "less", install and remove with "installpkg", rpm2tgz: "removepkg", "pkgtool", or manually with "tar"). rpm2tgz: rpm2tgz: Converted packages come with no warranty. ;-) rpm2tgz: PACKAGE NAME: rstart-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: rstart: rstart rstart: rstart: rstart is part of X11. rstart: rstart: For more information about the X.Org Foundation (the providers of the rstart: X.Org implementation of the X Window System), see their website: rstart: rstart: http://www.x.org rstart: PACKAGE NAME: rsync-2.6.9-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 224 K PACKAGE SIZE (uncompressed): 420 K PACKAGE DESCRIPTION: rsync: rsync rsync: rsync: rsync is a replacement for rcp that has many more features. It rsync: uses the "rsync algorithm" which provides a very fast method for rsync: bringing remote files into sync. It does this by sending just the rsync: differences in the files across the link, without requiring that both rsync: sets of files are present at one of the ends of the link beforehand. rsync: rsync: rsync was written by Andrew Tridgell and Paul Mackerras. rsync: PACKAGE NAME: ruby-1.8.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 3202 K PACKAGE SIZE (uncompressed): 20740 K PACKAGE DESCRIPTION: ruby: ruby (Interpreted object-oriented scripting language) ruby: ruby: Ruby is an interpreted scripting language for quick and easy ruby: object-oriented programming. It has many features to process text ruby: files and to do system management tasks (as in Perl). It is simple, ruby: straight-forward, and extensible. ruby: ruby: Visit the Ruby project online at http://www.ruby-lang.org/ ruby: PACKAGE NAME: rxvt-2.7.10-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 194 K PACKAGE SIZE (uncompressed): 560 K PACKAGE DESCRIPTION: rxvt: rxvt (terminal emulator) rxvt: rxvt: rxvt is a color vt102 terminal emulator intended as an xterm rxvt: replacement for users who do not require features such as Tektronix rxvt: 4014 emulation and toolkit-style configurability. As a result, rxvt rxvt: uses much less memory -- a significant advantage on a machine serving rxvt: many X sessions. Also included is rclock, an analog clock for X. rxvt: PACKAGE NAME: rzip-2.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: rzip: rzip (a large-file compression program) rzip: rzip: rzip is a file compression program designed to do particularly well rzip: on very large files containing long distance redundancy. rzip: rzip: rzip was written by Andrew Tridgell. rzip: PACKAGE NAME: samba-3.0.26a-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 23695 K PACKAGE SIZE (uncompressed): 56030 K PACKAGE DESCRIPTION: samba: samba (SMB file and print server) samba: samba: Samba is an SMB file and print server for SMB and CIFS clients. It samba: allows you to make file space or printers on a Samba host available to samba: any PCs running SMB clients (such as PCs running Windows). samba: samba: If you have any SMB servers (such as Windows NT/2K Server), you may be samba: able to replace them by or supplement them with Samba. One of Samba's samba: big strengths is integration, so you can use it to tie together your samba: Linux hosts and Windows PC clients. samba: PACKAGE NAME: sane-1.0.18-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 3431 K PACKAGE SIZE (uncompressed): 9460 K PACKAGE DESCRIPTION: sane: sane (Scanner Access Now Easy) sane: sane: SANE is a universal scanner interface that provides standardized sane: access to any raster image scanner hardware, such as flatbed scanners, sane: hand-held scanners, video and still cameras, frame-grabbers, and other sane: similar devices. sane: PACKAGE NAME: sc-7.16-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 220 K PACKAGE SIZE (uncompressed): 480 K PACKAGE DESCRIPTION: sc: sc (spreadsheet calculator) sc: sc: This is a simple curses-based spreadsheet program. sc: PACKAGE NAME: screen-4.0.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 578 K PACKAGE SIZE (uncompressed): 840 K PACKAGE DESCRIPTION: screen: screen (screen manager with VT100/ANSI terminal emulation) screen: screen: Screen is a full-screen window manager that multiplexes a physical screen: terminal between several processes (typically interactive shells). screen: Each virtual terminal provides the functions of a DEC VT100 terminal screen: and several control functions from the ISO 6492 (ECMA 48, ANSI X3.64) screen: and ISO 2022 standards (e.g. insert/delete line and support for screen: multiple character sets). There is a scrollback history buffer for screen: each virtual terminal and a copy-and-paste mechanism that allows screen: moving text regions between windows. screen: PACKAGE NAME: scripts-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: scripts: scripts scripts: scripts: scripts is part of X11. scripts: scripts: For more information about the X.Org Foundation (the providers of the scripts: X.Org implementation of the X Window System), see their website: scripts: scripts: http://www.x.org scripts: PACKAGE NAME: scrnsaverproto-1.1.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: scrnsaverproto: scrnsaverproto scrnsaverproto: scrnsaverproto: scrnsaverproto is part of X11. scrnsaverproto: scrnsaverproto: For more information about the X.Org Foundation (the providers of the scrnsaverproto: X.Org implementation of the X Window System), see their website: scrnsaverproto: scrnsaverproto: http://www.x.org scrnsaverproto: PACKAGE NAME: sdl-1.2.11-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 731 K PACKAGE SIZE (uncompressed): 2920 K PACKAGE DESCRIPTION: sdl: sdl (Simple DirectMedia Layer library) sdl: sdl: This is the Simple DirectMedia Layer, a generic API that provides low sdl: level access to audio, keyboard, mouse, joystick, 3D hardware via sdl: OpenGL, and 2D framebuffer across multiple platforms. sdl: sdl: SDL links against alsa-lib, arts, audiofile, esound, and the X11 sdl: libraries. Make sure all of these are installed if you're planning to sdl: use SDL (a full installation will cover all of the prerequisites). sdl: PACKAGE NAME: sdparm-1.01-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 107 K PACKAGE SIZE (uncompressed): 310 K PACKAGE DESCRIPTION: sdparm: sdparm (fetch and change SCSI attributes) sdparm: sdparm: sdparm is a utility for listing and potentially changing SCSI disk sdparm: parameters. More generally it can be used on any device that uses sdparm: a SCSI command set. Apart from SCSI disks, examples of devices that sdparm: use SCSI command sets are ATAPI CD/DVD drives, SCSI and ATAPI tape sdparm: drives and SCSI enclosures. sdparm: sdparm: sdparm was written by Douglas Gilbert. sdparm: PACKAGE NAME: seamonkey-1.1.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 18890 K PACKAGE SIZE (uncompressed): 76310 K PACKAGE DESCRIPTION: seamonkey: SeaMonkey (an open-source web browser suite) seamonkey: seamonkey: The SeaMonkey browser suite. SeaMonkey features a state-of-the-art seamonkey: web browser and powerful email client, as well as a WYSIWYG web page seamonkey: composer and a feature-rich IRC chat client. For web developers, seamonkey: mozilla.org's DOM inspector and JavaScript debugger tools are seamonkey: included as well. seamonkey: seamonkey: Visit the SeaMonkey project at this URL: seamonkey: http://www.mozilla.org/projects/seamonkey/ seamonkey: PACKAGE NAME: sed-4.1.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 161 K PACKAGE SIZE (uncompressed): 450 K PACKAGE DESCRIPTION: sed: sed (stream editor) sed: sed: This is the GNU version of sed, a stream editor. A stream editor is sed: used to perform basic text transformations on an input stream (a file sed: or input from a pipeline). It is sed's ability to filter text in a sed: pipeline which distinguishes it from other types of editors. sed: sed: sed is a required package (it is needed by many system scripts). sed: PACKAGE NAME: sendmail-8.14.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 1447 K PACKAGE SIZE (uncompressed): 3690 K PACKAGE DESCRIPTION: sendmail: sendmail (mail transfer agent) sendmail: sendmail: Eric Allman's mail transport agent. The _Unix System Administration sendmail: Handbook_ calls sendmail 'The most complex and complete mail delivery sendmail: system in common use...' sendmail: sendmail: Ready-made configuration files are included for systems connected by sendmail: TCP/IP (with or without a nameserver) and for systems using UUCP. sendmail: sendmail: The procmail package is required to handle local mail delivery. sendmail: PACKAGE NAME: sendmail-cf-8.14.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 265 K PACKAGE SIZE (uncompressed): 1110 K PACKAGE DESCRIPTION: sendmail-cf: sendmail-cf (configuration files for sendmail) sendmail-cf: sendmail-cf: These files are used to create sendmail.cf configuration files. The sendmail-cf: m4 macro processor is also required in order to make use of these sendmail-cf: files. sendmail-cf: sendmail-cf: The files and documentation in /usr/share/sendmail should make it sendmail-cf: possible to support virtually any mail configuration. NOTE: You sendmail-cf: probably won't need this package if you're planning to use one of the sendmail-cf: sendmail.cf samples included in the sendmail package. sendmail-cf: PACKAGE NAME: sessreg-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: sessreg: sessreg sessreg: sessreg: sessreg is part of X11. sessreg: sessreg: For more information about the X.Org Foundation (the providers of the sessreg: X.Org implementation of the X Window System), see their website: sessreg: sessreg: http://www.x.org sessreg: PACKAGE NAME: setxkbmap-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: setxkbmap: setxkbmap setxkbmap: setxkbmap: setxkbmap is part of X11. setxkbmap: setxkbmap: For more information about the X.Org Foundation (the providers of the setxkbmap: X.Org implementation of the X Window System), see their website: setxkbmap: setxkbmap: http://www.x.org setxkbmap: PACKAGE NAME: seyon-2.20c-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 139 K PACKAGE SIZE (uncompressed): 370 K PACKAGE DESCRIPTION: seyon: seyon (telecommunications package) seyon: seyon: Seyon is a complete full-featured telecommunications package for the seyon: X Window System. Some of its features are: Dialing directory that seyon: supports an unlimited number of entries. Terminal emulation window seyon: supporting DEC VT02, Tektronix 4014, and ANSI. Script language to seyon: automate tedious tasks such as logging into remote hosts. Unlimited seyon: number of slots for external file transfer protocols. Support for seyon: zmodem auto-download. Seyon is intended to be both simple and seyon: extensively configurable. seyon: PACKAGE NAME: shadow-4.0.6-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 1086 K PACKAGE SIZE (uncompressed): 2840 K PACKAGE DESCRIPTION: shadow: shadow (shadow password suite) shadow: shadow: This set of login related programs utilizes an alternate, non-readable shadow: file to contain the actual encrypted passwords. This is presumed to shadow: increase system security by increasing the difficulty with which shadow: system crackers obtain encrypted passwords. It was written by shadow: Julianne Frances Haugh and the Linux port is maintained by Tomasz shadow: Kloczko. shadow: shadow: This package provides 'login', which is needed to log into the system. shadow: PACKAGE NAME: shared-mime-info-0.21-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 490 K PACKAGE SIZE (uncompressed): 2820 K PACKAGE DESCRIPTION: shared-mime-info: shared-mime-info (MIME database) shared-mime-info: shared-mime-info: This package contains: shared-mime-info: shared-mime-info: The freedesktop.org shared MIME database spec. shared-mime-info: The merged GNOME and KDE databases, in the new format. shared-mime-info: The update-mime-database command, used to install new MIME data. shared-mime-info: shared-mime-info: See http://www.freedesktop.org/standards/shared-mime-info.html for shared-mime-info: more information. shared-mime-info: PACKAGE NAME: sharutils-4.6.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 199 K PACKAGE SIZE (uncompressed): 680 K PACKAGE DESCRIPTION: sharutils: sharutils (GNU shell archive packing utilities) sharutils: sharutils: `shar' makes so-called shell archives out of many files, preparing sharutils: them for transmission by electronic mail services. `unshar' helps sharutils: unpacking shell archives after reception. `uuencode' prepares a file sharutils: for transmission over an electronic channel which ignores or otherwise sharutils: mangles the eight bit (high order bit) of bytes. `uudecode' does the sharutils: converse transformation. `remsync' allows for remote synchronization sharutils: of directory trees using electronic mail. sharutils: PACKAGE NAME: showfont-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: showfont: showfont showfont: showfont: showfont is part of X11. showfont: showfont: For more information about the X.Org Foundation (the providers of the showfont: X.Org implementation of the X Window System), see their website: showfont: showfont: http://www.x.org showfont: PACKAGE NAME: slang-2.0.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 580 K PACKAGE SIZE (uncompressed): 2280 K PACKAGE DESCRIPTION: slang: slang (S-Lang interpreter version 2) slang: slang: S-Lang is an interpreted language that was designed from the start slang: to be easily embedded into a program to provide it with a powerful slang: extension language. S-Lang is also a programmer's library that slang: permits a programmer to develop sophisticated platform-independent slang: software. In addition to providing the S-Lang extension language, slang: the library provides facilities for screen management, keymaps, slang: and low-level terminal I/O. slang: PACKAGE NAME: slang1-1.4.9-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 816 K PACKAGE SIZE (uncompressed): 2960 K PACKAGE DESCRIPTION: slang1: slang slang1: slang1: S-Lang is an interpreted language that was designed from the start slang1: to be easily embedded into a program to provide it with a powerful slang1: extension language. S-Lang is also a programmer's library that slang1: permits a programmer to develop sophisticated platform-independent slang1: software. In addition to providing the S-Lang extension language, slang1: the library provides facilities for screen management, keymaps, slang1: and low-level terminal I/O. slang1: PACKAGE NAME: slocate-3.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: slocate: slocate (Secure Locate) slocate: slocate: Slocate is an enhanced version of locate, a command to help you locate slocate: files on the system. Like the original version of locate, Slocate slocate: maintains a database of files on the system, updating it nightly. slocate: Unlike the original, Slocate indexes every file on the machine rather slocate: than only the ones that can be seen by everyone. The "secure" part of slocate: slocate is that it will only return matches if the user is allowed to slocate: see the files. slocate: PACKAGE NAME: slrn-0.9.8.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 971 K PACKAGE SIZE (uncompressed): 2540 K PACKAGE DESCRIPTION: slrn: slrn (s-lang read news) slrn: slrn: slrn is an easy to use but powerful newsreader. It is highly slrn: customizable, supports scoring, free key bindings, and can be extended slrn: using the s-lang macro language. slrn: slrn: slrn was written by John E. Davis, and is maintained by Thomas slrn: Schultz. slrn: PACKAGE NAME: smartmontools-5.36-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 238 K PACKAGE SIZE (uncompressed): 540 K PACKAGE DESCRIPTION: smartmontools: smartmontools (hard drive monitoring utilities) smartmontools: smartmontools: SMARTMONTOOLS contains utilities that control and monitor storage smartmontools: devices using the Self-Monitoring, Analysis and Reporting Technology smartmontools: (S.M.A.R.T.) system build into ATA and SCSI Hard Drives. This is used smartmontools: to check the reliability of the hard drive and to predict drive smartmontools: failures. SMARTMONTOOLS Version 5.x is designed to comply to the smartmontools: ATA/ATAPI-5 specification (Revision 1). Future releases of smartmontools: SMARTMONTOOLS (Versions 6.x and 7.x) will comply with the ATA/ATAPI-6 smartmontools: and ATA/ATAPI-7 specifications. smartmontools: PACKAGE NAME: smproxy-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: smproxy: smproxy smproxy: smproxy: smproxy is part of X11. smproxy: smproxy: For more information about the X.Org Foundation (the providers of the smproxy: X.Org implementation of the X Window System), see their website: smproxy: smproxy: http://www.x.org smproxy: PACKAGE NAME: sox-12.18.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 324 K PACKAGE SIZE (uncompressed): 740 K PACKAGE DESCRIPTION: sox: sox (universal sound sample translator) sox: sox: Sox is a universal sound converter, player, and recorder. It can sox: play, record, and convert between several sound file formats such as sox: .au, .snd, .voc and .wav. sox: PACKAGE NAME: splitvt-1.6.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: splitvt: splitvt (run multiple shells in a single window) splitvt: splitvt: This program splits the screen into two windows, one above the other, splitvt: and runs a shell in each one. splitvt: splitvt: Splitvt was written by Sam Lantinga. splitvt: PACKAGE NAME: startup-notification-0.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: startup-notification: startup-notification startup-notification: startup-notification: Adds support for applications to use "busy" cursors while starting up. startup-notification: PACKAGE NAME: strace-4.5.15-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: strace: strace (trace system calls and signals) strace: strace: Strace allows you to trace the execution of a command. It runs the strace: specified command until it exits, intercepting signals and system strace: calls and dumping the information to the standard error. System strace: administrators, diagnosticians and trouble-shooters will find it strace: invaluable for solving problems with programs for which the source strace: is not readily available since they do not need to be recompiled in strace: order to trace them. strace: PACKAGE NAME: stunnel-4.17-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 116 K PACKAGE SIZE (uncompressed): 310 K PACKAGE DESCRIPTION: stunnel: stunnel (Universal SSL tunnel) stunnel: stunnel: The stunnel program is designed to work as an SSL encryption wrapper stunnel: between remote client and local (inetd-startable) or remote servers. stunnel: The goal is to facilitate SSL encryption and authentication for stunnel: non-SSL-aware programs. stunnel: stunnel: stunnel can be used to add SSL functionality to commonly used inetd stunnel: daemons like POP-2, POP-3 and IMAP servers without any changes in the stunnel: programs' code. stunnel: PACKAGE NAME: subversion-1.4.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/d PACKAGE SIZE (compressed): 2347 K PACKAGE SIZE (uncompressed): 7300 K PACKAGE DESCRIPTION: subversion: subversion (a version control system) subversion: subversion: Subversion is a version control system which allows you to keep old subversion: versions of files and directories (usually source code), and keep a subversion: log of who, when, and why changes occurred, similar to other such subversion: systems like CVS, RCS or SCCS. Subversion keeps all the information subversion: to permit extracting previous versions of those files at any time. subversion: subversion: For more information about the Subversion project, visit: subversion: http://subversion.tigris.org subversion: PACKAGE NAME: sudo-1.6.8p12-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 146 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: sudo: sudo (give limited root privileges to certain users) sudo: sudo: 'sudo' is a command that allows users to execute some commands as sudo: root. The /etc/sudoers file (edited with 'visudo') specifies which sudo: users have access to sudo and which commands they can run. 'sudo' sudo: logs all its activities to /var/log/ so the system administrator sudo: can keep an eye on things. sudo: PACKAGE NAME: svgalib-1.9.25-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 666 K PACKAGE SIZE (uncompressed): 1550 K PACKAGE DESCRIPTION: svgalib: svgalib (A low level graphics library for Linux) svgalib: svgalib: This is a low level graphics library for Linux, originally based on svgalib: VGAlib 1.2 by Tommy Frandsen. Support for many more chipsets has svgalib: been added. svgalib: svgalib: This version of svgalib requires a kernel module (svgalib_helper), svgalib: which is separately packaged in "svgalib_helper". svgalib: svgalib: svgalib is currently maintained by Matan Ziv-Av. svgalib: PACKAGE NAME: svgalib_helper-1.9.25_2.6.22.8-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: svgalib_helper: svgalib_helper (kernel module required by svgalib) svgalib_helper: svgalib_helper: This package contains the kernel module (svgalib_helper) svgalib_helper: required by the svgalib package. svgalib_helper: svgalib_helper: svgalib is currently maintained by Matan Ziv-Av. svgalib_helper: PACKAGE NAME: sysfsutils-2.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 47 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: sysfsutils: sysfsutils (Utilities for the sysfs filesystem) sysfsutils: sysfsutils: The purpose of this package is to provide a set of utilities for sysfsutils: interfacing with sysfs, a virtual filesystem in Linux kernel versions sysfsutils: 2.6+ that provides a tree of system devices. While a filesystem is a sysfsutils: very useful interface, a library (libsysfs) is also included that sysfsutils: will hopefully make it easier for applications to query system sysfsutils: devices and their attributes. sysfsutils: PACKAGE NAME: sysklogd-1.4.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 65 K PACKAGE SIZE (uncompressed): 150 K PACKAGE DESCRIPTION: sysklogd: sysklogd (Linux system logging utilities) sysklogd: sysklogd: Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd. sysklogd: sysklogd: This package contains a modified version of syslogd for the Linux sysklogd: environment. An additional utility, klogd, is included which allows sysklogd: kernel logging to be directed through the syslogd facility. sysklogd: Syslogd and klogd are started when your system boots. sysklogd: PACKAGE NAME: syslinux-3.36-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 305 K PACKAGE SIZE (uncompressed): 800 K PACKAGE DESCRIPTION: syslinux: syslinux (SYSLINUX/PXELINUX/ISOLINUX boot loaders) syslinux: syslinux: SYSLINUX is a boot loader for the Linux operating system which syslinux: operates off an MS-DOS/Windows FAT filesystem. This is used by the syslinux: Slackware makebootdisk script to create system boot floppies. syslinux: syslinux: Also included are PXELINUX and ISOLINUX, boot loaders for booting from syslinux: a network server or CD-ROM. syslinux: syslinux: SYSLINUX, PXELINUX, and ISOLINUX were written by H. Peter Anvin. syslinux: PACKAGE NAME: sysstat-7.0.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 139 K PACKAGE SIZE (uncompressed): 390 K PACKAGE DESCRIPTION: sysstat: sysstat (system performance monitoring tools) sysstat: sysstat: The sysstat utilities are a collection of performance monitoring sysstat: tools for Linux. These include sar, sadf, mpstat, iostat and sa sysstat: tools. sysstat: sysstat: The sysstat utilities were written by Sebastien Godard. sysstat: PACKAGE NAME: sysvinit-2.86-x86_64_slamd64-8.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 180 K PACKAGE DESCRIPTION: sysvinit: sysvinit (init, the parent of all processes) sysvinit: sysvinit: System V style init programs by Miquel van Smoorenburg that control sysvinit: the booting and shutdown of your system. These support a number of sysvinit: system runlevels, each with a specific set of utilities spawned. sysvinit: For example, the normal system runlevel is 3, which starts agetty sysvinit: on virtual consoles tty1 - tty6. Runlevel 4 starts xdm. sysvinit: Runlevel 0 shuts the system down. sysvinit: PACKAGE NAME: sysvinit-functions-8.53-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: sysvinit-functions: sysvinit-functions (/etc/init.d/functions) sysvinit-functions: sysvinit-functions: This is the /etc/init.d/functions file, the typical sysvinit-style sysvinit-functions: directories, and a few supporting binaries. Using this system, sysvinit-functions: subdirectories of /etc/rc.d/ are searched for scripts (which are sysvinit-functions: usually symlinks to the script in /etc/init.d/ or /etc/rc.d/init.d/). sysvinit-functions: The links must start with S to start a script or K to stop (kill) it. sysvinit-functions: sysvinit-functions: For the most part, these are useful for running software developed sysvinit-functions: for other versions of Linux. sysvinit-functions: PACKAGE NAME: sysvinit-scripts-1.2-noarch_slamd64-4.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: sysvinit-scripts: sysvinit-scripts (the basic scripts used to boot your machine) sysvinit-scripts: sysvinit-scripts: These are the Slackware boot scripts, which are needed to start the sysvinit-scripts: machine. Sysvinit looks for these in /etc/rc.d/. sysvinit-scripts: PACKAGE NAME: t1lib-5.1.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 979 K PACKAGE SIZE (uncompressed): 1560 K PACKAGE DESCRIPTION: t1lib: t1lib (Type 1 font rasterizer library) t1lib: t1lib: t1lib is a library distributed under the GNU General Public Library t1lib: License for generating character and string glyphs from Adobe Type 1 t1lib: fonts under UNIX. t1lib uses most of the code of the X11 rasterizer t1lib: donated by IBM to the X11 project. t1lib: PACKAGE NAME: taglib-1.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 178 K PACKAGE SIZE (uncompressed): 720 K PACKAGE DESCRIPTION: taglib: taglib (audio meta-data library) taglib: taglib: TagLib is a library for reading and editing the meta-data of several taglib: popular audio formats. Currently it supports both ID3v1 and ID3v2 taglib: for MP3 files, Ogg Vorbis comments and ID3 tags and Vorbis comments taglib: in FLAC files. taglib: PACKAGE NAME: tar-1.16.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 810 K PACKAGE SIZE (uncompressed): 2320 K PACKAGE DESCRIPTION: tar: tar (archiving utility) tar: tar: This is the GNU version of tar, an archiving program designed to store tar: and extract files from an archive file known as a tarfile. A tarfile tar: may be made on a tape drive, however, it is also common to write a tar: tarfile to a normal file. tar: tar: Slackware's package system uses tarfiles compressed with GNU gzip. tar: PACKAGE NAME: tcl-8.4.15-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/tcl PACKAGE SIZE (compressed): 1759 K PACKAGE SIZE (uncompressed): 4160 K PACKAGE DESCRIPTION: tcl: tcl (Tool Command Language) tcl: tcl: Tcl, developed by Dr. John Ousterhout, is a simple to use text-based tcl: script language with many built-in features which make it especially tcl: nice for writing interactive scripts. tcl: PACKAGE NAME: tclx-8.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/tcl PACKAGE SIZE (compressed): 123 K PACKAGE SIZE (uncompressed): 310 K PACKAGE DESCRIPTION: tclx: tclx (Extended Tcl) tclx: tclx: Extended Tcl (TclX), is a set of extensions to Tcl, the Tool Command tclx: Language invented by Dr. John Ousterhout. Extended Tcl is oriented tclx: towards Unix system programming tasks and large application tclx: development. Many additional interfaces to the Unix operating system tclx: are provided. Extended Tcl was designed and implemented by Karl tclx: Lehenbauer (karl@NeoSoft.com) and Mark Diekhans (markd@Grizzly.com), tclx: with help in the early stages from Peter da Silva (peter@NeoSoft.com). tclx: PACKAGE NAME: tcp_wrappers-7.6-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 116 K PACKAGE SIZE (uncompressed): 340 K PACKAGE DESCRIPTION: tcp_wrappers: tcp_wrappers (TCP/IP daemon wrapper library and utilities) tcp_wrappers: tcp_wrappers: With this package you can monitor and filter incoming requests for tcp_wrappers: network services for access control, and detection things like host tcp_wrappers: name spoofing and host address spoofing. Nearly all the network tcp_wrappers: daemons on Slackware are "wrapped" using this library, and most tcp_wrappers: daemons in /etc/inetd.conf use tcp_wrappers' tcpd wrapper daemon. tcp_wrappers: If you plan to do much networking, you will need tcp_wrappers. tcp_wrappers: tcp_wrappers: tcp_wrappers was written by Wietse Venema. tcp_wrappers: PACKAGE NAME: tcpdump-3.9.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 511 K PACKAGE SIZE (uncompressed): 1270 K PACKAGE DESCRIPTION: tcpdump: tcpdump tcpdump: tcpdump: Tcpdump is a tool for network monitoring and data acquisition. You tcpdump: can use it to dump information on all the packets on a network that tcpdump: match a boolean expression. Tcpdump uses libpcap, a system tcpdump: independent interface for user-level packet capture. tcpdump: PACKAGE NAME: tcsh-6.15.00-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 311 K PACKAGE SIZE (uncompressed): 630 K PACKAGE DESCRIPTION: tcsh: tcsh (C shell) tcsh: tcsh: tcsh is an enhanced but completely compatible version of the Berkeley tcsh: UNIX C shell, csh(1). It is a command language interpreter usable both tcsh: as an interactive login shell and a shell script command processor. It tcsh: includes a command-line editor, programmable word completion, spelling tcsh: correction, a history mechanism, job control, and a C-like syntax. tcsh: PACKAGE NAME: telnet-0.17-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: telnet: telnet (the telnet client and daemon) telnet: telnet: telnet supports the original DARPA telnet interactive communication telnet: protocol. As connecting to a telnetd server transmits your password telnet: over the network in cleartext, telnet's use as a login protocol has telnet: been mostly superceded by the use of ssh and sshd. However, the telnet: telnet client is still a very handy tool, and telnetd may still have telnet: some uses on networks that are known to be secure. telnet: telnet: telnet and telnetd were ported from BSD. telnet: PACKAGE NAME: tetex-3.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/t PACKAGE SIZE (compressed): 52620 K PACKAGE SIZE (uncompressed): 158030 K PACKAGE DESCRIPTION: tetex: tetex (teTeX binaries and support files) tetex: tetex: This package contains the binaries and support files required for the tetex: teTeX TeX distribution, such as input files for TeX, runtime tetex: configuration files, hyphenation tables, manpages, and the computer tetex: modern fonts. tetex: PACKAGE NAME: tetex-doc-3.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/t PACKAGE SIZE (compressed): 47843 K PACKAGE SIZE (uncompressed): 92970 K PACKAGE DESCRIPTION: tetex-doc: tetex-doc (Documentation for teTeX) tetex-doc: tetex-doc: This package contains documentation for AMSTeX, BibTeX, extended plain tetex-doc: format, font packages, format files (babel, texdraw, pstricks, xypic), tetex-doc: LaTeX, MetaPost, Makeindex, pdftex, the Kpathsea library, as well as tetex-doc: general information about TeX such as a list of ftp servers, a draft tetex-doc: for the TeX Directory Standard (TDS), The TeX and LaTeX Catalogue, tetex-doc: TeX FAQs, and more. tetex-doc: PACKAGE NAME: texinfo-4.8-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 911 K PACKAGE SIZE (uncompressed): 2030 K PACKAGE DESCRIPTION: texinfo: texinfo (GNU software documentation system) texinfo: texinfo: 'Texinfo' is a documentation system that uses a single source file to texinfo: produce both on-line information and printed output. Using Texinfo, texinfo: you can create a printed document with the normal features of a book, texinfo: including chapters, sections, cross references, and indices. From the texinfo: same Texinfo source file, you can create a menu-driven, on-line Info texinfo: file with nodes, menus, cross references, and indices. texinfo: texinfo: This package is needed to read the documentation files in /usr/info. texinfo: PACKAGE NAME: tftp-hpa-0.48-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: tftp-hpa: tftp-hpa (Trivial File Transfer Protocol) tftp-hpa: tftp-hpa: The Trivial File Transfer Protocol (TFTP) is normally used only for tftp-hpa: booting diskless workstations (or the Slackware installer). The tftp tftp-hpa: package provides the user interface for TFTP, which allows users to tftp-hpa: transfer files to and from a remote machine. This program and TFTP tftp-hpa: provide very little security, and should not be enabled unless it is tftp-hpa: expressly needed. tftp-hpa: tftp-hpa: tftp-hpa is maintained by H. Peter Anvin. tftp-hpa: PACKAGE NAME: time-1.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: time: time (the GNU time command for measuring program resource use) time: time: The `time' command runs another program, then displays information time: about the resources used by that program, collected by the system time: while the program was running. time: time: GNU time was originally written by David Keppel, with later versions time: worked on by David MacKenzie, Arne Henrik Juul, and Francois Pinard. time: PACKAGE NAME: tin-1.8.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 670 K PACKAGE SIZE (uncompressed): 1790 K PACKAGE DESCRIPTION: tin: tin (the Tin newsreader) tin: tin: Tin is a full-screen, easy-to-use Netnews reader. It can read news tin: locally (i.e. /var/spool/news) or remotely (rtin or tin -r option) tin: via a NNTP (Network News Transport Protocol) server. It will tin: automatically utilize NOV (news overview) style index files if tin: available locally or via the nntp xover command. tin: tin: Tin was written by Iain Lea and is currently tin: maintained by Urs Janssen . tin: PACKAGE NAME: tix-8.1.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/tcl PACKAGE SIZE (compressed): 1521 K PACKAGE SIZE (uncompressed): 4350 K PACKAGE DESCRIPTION: tix: tix (an extension to the Tk toolkit) tix: tix: Tix, which stands for Tk Interface Extension, is an extension library tix: for Tcl/Tk. Tix adds many new widgets, image types and other commands tix: that allows you to create compelling Tcl/Tk-based GUI applications. tix: With these new widgets, your applications will look great and interact tix: with your users in intuitive ways. tix: PACKAGE NAME: tk-8.4.15-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/tcl PACKAGE SIZE (compressed): 1535 K PACKAGE SIZE (uncompressed): 3610 K PACKAGE DESCRIPTION: tk: tk (Tk toolkit for Tcl) tk: tk: Tk is an extension to Tcl that allows you to quickly and easily build tk: X11 applications that have the look and feel of Motif apps. tk: PACKAGE NAME: traceroute-1.4a12-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: traceroute: traceroute (IP packet route tracing utility) traceroute: traceroute: The traceroute utility displays the route used by IP packets on their traceroute: way to a specified network host. Traceroute will display the IP traceroute: number and host name (if possible) of all the machines along the route traceroute: taken by the packets. If you're having network connectivity problems, traceroute: traceroute can show you where the trouble is located. traceroute: PACKAGE NAME: transfig-3.2.4-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/t PACKAGE SIZE (compressed): 238 K PACKAGE SIZE (uncompressed): 640 K PACKAGE DESCRIPTION: transfig: transfig transfig: transfig: This package contains the binaries to transform .fig files (created by transfig: xfig) to some other formats like epsf and LaTeX. If you have transfig: installed xfig, you should also install this package if you want to transfig: use xfig to create other files than .fig files, which can then be transfig: included in your LaTeX documents. transfig: PACKAGE NAME: trapproto-3.4.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: trapproto: trapproto trapproto: trapproto: trapproto is part of X11. trapproto: trapproto: For more information about the X.Org Foundation (the providers of the trapproto: X.Org implementation of the X Window System), see their website: trapproto: trapproto: http://www.x.org trapproto: PACKAGE NAME: tree-1.5.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: tree: tree (a program to display a directory tree) tree: tree: Tree is a recursive directory listing program that produces a depth tree: indented listing of files, which is colorized ala dircolors if the tree: LS_COLORS environment variable is set and output is to tty. With no tree: arguments, tree lists the files in the current directory. tree: tree: The tree utility was written by Steve Baker. tree: PACKAGE NAME: trn-3.6-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 206 K PACKAGE SIZE (uncompressed): 420 K PACKAGE DESCRIPTION: trn: trn (a threaded newsreader) trn: trn: A threaded news reader for reading a remote NNTP server. Compiled to trn: use Overviews or mthreads, and to read news through your NNTP server. trn: Be sure to set NNTPSERVER in your /etc/profile or /etc/csh.login. trn: PACKAGE NAME: ttf-indic-fonts-0.4.7.4-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3017 K PACKAGE SIZE (uncompressed): 6900 K PACKAGE DESCRIPTION: ttf-indic-fonts: ttf-indic-fonts (Fonts for Indic scripts) ttf-indic-fonts: ttf-indic-fonts: This is a collection of free fonts that support some of the more ttf-indic-fonts: widely used Indic scripts. Included are TTF fonts for Bengali, ttf-indic-fonts: Devanagari, Gujarati, Kannada, Malayalam, Oriya, Punjabi, Tamil, ttf-indic-fonts: and Telugu. ttf-indic-fonts: ttf-indic-fonts: For more information about enabling full Indic support (this package ttf-indic-fonts: will enable display, but probably not input), see the ttf-indic-fonts: Indic-Fonts-HOWTO which can be found in /usr/doc/Linux-HOWTOs. ttf-indic-fonts: PACKAGE NAME: twm-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 103 K PACKAGE SIZE (uncompressed): 210 K PACKAGE DESCRIPTION: twm: twm twm: twm: twm is part of X11. twm: twm: For more information about the X.Org Foundation (the providers of the twm: X.Org implementation of the X Window System), see their website: twm: twm: http://www.x.org twm: PACKAGE NAME: udev-111-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 211 K PACKAGE SIZE (uncompressed): 620 K PACKAGE DESCRIPTION: udev: udev (dynamic device directory system) udev: udev: udev provides a dynamic device directory containing only the files udev: for the devices which are actually present. It creates or removes udev: device node files usually located in the /dev directory. udev: udev: udev requires a 2.6 or newer kernel. udev: udev: Kay Sievers is the udev maintainer. udev: PACKAGE NAME: unarj-265-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: unarj: unarj (a command-line utility for decompressing .arj archives) unarj: unarj: This is a simple command-line tool for decompressing .arj files. unarj: Thanks to Haruhiko Okumura and ARJ Software, Inc. for providing this unarj: source code free of charge. unarj: unarj: UNARJ software and manual copyright (c) 1990-2002 ARJ Software, Inc. unarj: All rights reserved. unarj: PACKAGE NAME: usbutils-0.72-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 110 K PACKAGE SIZE (uncompressed): 290 K PACKAGE DESCRIPTION: usbutils: usbutils (USB utilities) usbutils: usbutils: lsusb displays detailed information about all USB buses and devices usbutils: in the system. usbutils: usbutils: usbmodules lists the kernel modules for a plugged in USB device. usbutils: usbutils: See the manual pages for more details. usbutils: PACKAGE NAME: utempter-1.1.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: utempter: utempter (utmp updating library and utility) utempter: utempter: The utempter package provides a utility and shared library that utempter: allows terminal applications such as xterm and screen to update utempter: /var/run/utmp and /var/log/wtmp without requiring root privileges. utempter: PACKAGE NAME: util-linux-2.12r-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 1899 K PACKAGE SIZE (uncompressed): 4870 K PACKAGE DESCRIPTION: util-linux: util-linux (a huge collection of essential utilities) util-linux: util-linux: The util-linux package is a huge collection of random utilities that util-linux: are essential to run a Linux system. This package includes the util-linux: util-linux package from ftp.kernel.org, plus some related programs util-linux: from other sources such as adjtimex, bsdstrings, net-tools (only for util-linux: 'hostname', a complete version is in the tcpip package), schedutils, util-linux: setserial, and ziptool. util-linux: PACKAGE NAME: util-macros-1.1.5-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: util-macros: util-macros util-macros: util-macros: util-macros is part of X11. util-macros: util-macros: For more information about the X.Org Foundation (the providers of the util-macros: X.Org implementation of the X Window System), see their website: util-macros: util-macros: http://www.x.org util-macros: PACKAGE NAME: uucp-1.07-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 714 K PACKAGE SIZE (uncompressed): 1410 K PACKAGE DESCRIPTION: uucp: uucp (Taylor UUCP) uucp: uucp: Ian Taylor's Unix to Unix copy: mail and news over modem lines. uucp: This is the standard UUCP package of the Free Software Foundation. uucp: uucp: Configured to use HoneyDanBer and/or Taylor configuration files. uucp: PACKAGE NAME: videoproto-2.2.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: videoproto: videoproto videoproto: videoproto: videoproto is part of X11. videoproto: videoproto: For more information about the X.Org Foundation (the providers of the videoproto: X.Org implementation of the X Window System), see their website: videoproto: videoproto: http://www.x.org videoproto: PACKAGE NAME: viewres-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: viewres: viewres viewres: viewres: viewres is part of X11. viewres: viewres: For more information about the X.Org Foundation (the providers of the viewres: X.Org implementation of the X Window System), see their website: viewres: viewres: http://www.x.org viewres: PACKAGE NAME: vim-7.1.012-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 7974 K PACKAGE SIZE (uncompressed): 22860 K PACKAGE DESCRIPTION: vim: vim (Vi IMproved) vim: vim: Vim is an almost compatible version of the UNIX editor vi. Many new vim: features have been added: multi level undo, command line history, vim: filename completion, block operations, and more. vim: vim: Vim's development is led by Bram Moolenaar. vim: vim: This package also contains the Exuberant Ctags program vim: written by Darren Hiebert. vim: PACKAGE NAME: vim-gvim-7.1.012-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1546 K PACKAGE SIZE (uncompressed): 3200 K PACKAGE DESCRIPTION: vim-gvim: vim-gvim (gvim, the X/GTK2 enabled version of vim) vim-gvim: vim-gvim: Gvim is a graphical version of vim. Vim is an almost compatible vim-gvim: version of the UNIX editor vi. Many new features have been added, vim-gvim: such as multi level undo, command line history, filename completion, vim-gvim: block operations, and more. vim-gvim: vim-gvim: The main vim package in the AP series is required to use this package. vim-gvim: vim-gvim: Vim's development is led by Bram Moolenaar. vim-gvim: PACKAGE NAME: vlan-1.9-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: vlan: vlan (VLAN (802.1q) configuration program) vlan: vlan: The vlan package contains the vconfig program, which allows you to vlan: create and remove VLAN devices on a VLAN enabled kernel. VLAN vlan: devices are virtual Ethernet devices which represent virtual LANs on vlan: the physical LAN. vlan: vlan: vlan is primarily the work of Alex Zeffertt, Cambridge Broadband Ltd, vlan: extensively rewritten by Ben Greear. vlan: PACKAGE NAME: vorbis-tools-1.1.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 183 K PACKAGE SIZE (uncompressed): 590 K PACKAGE DESCRIPTION: vorbis-tools: vorbis-tools (Ogg Vorbis Tools) vorbis-tools: vorbis-tools: The vorbis-tools package contains several basic tools for working with vorbis-tools: compressed audio files in the Ogg Vorbis (.ogg) format: vorbis-tools: vorbis-tools: oggenc (an .ogg encoder), ogg123 (a playback tool), vorbiscomment vorbis-tools: (add comments to vorbis files), ogginfo (show information about an vorbis-tools: ogg file), oggdec (a command line decoder), and vcut (a tool for vorbis-tools: splitting vorbis files). vorbis-tools: vorbis-tools: These tools require the libao, libogg, and libvorbis libraries. PACKAGE NAME: vsftpd-2.0.5-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 124 K PACKAGE SIZE (uncompressed): 330 K PACKAGE DESCRIPTION: vsftpd: vsftpd (Very Secure FTP Daemon) vsftpd: vsftpd: vsftpd is an FTP server, or daemon. The 'vs' stands for Very Secure. vsftpd: Obviously this is not a guarantee, but a reflection that the entire vsftpd: codebase was written with security in mind, and carefully designed to vsftpd: be resilient to attack (as well as extremely fast and scalable). vsftpd: vsftpd: The vsftpd homepage is http://vsftpd.beasts.org/ vsftpd: vsftpd: The Very Secure FTP Daemon was written by Chris Evans. vsftpd: PACKAGE NAME: vte-0.16.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 741 K PACKAGE SIZE (uncompressed): 2910 K PACKAGE DESCRIPTION: vte: vte (terminal emulator widget) vte: vte: VTE is a terminal emulator widget for use with GTK+. This package vte: contains the VTE library and development files and a sample vte: implementation (vte). vte: vte: VTE is used by XFce. vte: PACKAGE NAME: wget-1.10.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 589 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE DESCRIPTION: wget: wget (a non-interactive network retriever) wget: wget: GNU Wget is a free network utility to retrieve files from the wget: World Wide Web using HTTP and FTP, the two most widely used Internet wget: protocols. It works non-interactively, thus enabling work in the wget: background after having logged off. wget: wget: The author of Wget is Hrvoje Niksic . wget: PACKAGE NAME: which-2.16-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: which: which (shows the full path to shell commands) which: which: GNU 'which' takes one or more arguments. For each of its arguments it which: prints to stdout the full path of the executables that would have been which: executed when this argument had been entered at the shell prompt. It which: does this by searching for an executable or script in the directories which: listed in the environment variable PATH using the same algorithm as which: bash(1). 'Which' is a built-in function in many shells. which: which: The GNU version of which was written by Carlo Wood. which: PACKAGE NAME: whois-4.7.21-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: whois: whois (whois directory client) whois: whois: This is an enhanced whois (RFC 954) client derived from the BSD and whois: RIPE whois programs. It can automatically select the appropriate whois: whois server for most queries. whois: whois: This version of whois was written by Marco d'Itri whois: For more information, see: http://www.linux.it/~md/software/ whois: PACKAGE NAME: windowmaker-0.92.0-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 2811 K PACKAGE SIZE (uncompressed): 7350 K PACKAGE DESCRIPTION: windowmaker: windowmaker (a fast and elegant window manager) windowmaker: windowmaker: Window Maker is a window manager for the X Window System that is windowmaker: relatively fast and small, feature rich, easy to use, with a simple windowmaker: and elegant appearance reminiscent of the NeXTSTEP(tm) graphical windowmaker: user interface. windowmaker: windowmaker: Window Maker is part of the official GNU project. windowmaker: PACKAGE NAME: wireless-tools-28-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 171 K PACKAGE SIZE (uncompressed): 480 K PACKAGE DESCRIPTION: wireless-tools: wireless-tools (utilities for wireless networking) wireless-tools: wireless-tools: This package contains tools and a library used for configuring wireless-tools: wireless networking interfaces: wireless-tools: iwconfig (the main wireless tool), iwlist (display more detailed wireless-tools: information than iwconfig), iwspy (get stats per MAC address and wireless-tools: more), iwpriv (set driver private ioctls), iwgetid (show the wireless-tools: ESSID or NWID of a device), iwevent (display wireless events), wireless-tools: ifrename (rename a network interface). wireless-tools: wireless-tools: The wireless-tools were written by Jean Tourrilhes. PACKAGE NAME: workbone-2.40-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: workbone: workbone (text-based CD player) workbone: workbone: WorkBone is a simple interactive tool for for playing audio CDs from workbone: the Linux console. workbone: PACKAGE NAME: wpa_supplicant-0.5.7-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 263 K PACKAGE SIZE (uncompressed): 680 K PACKAGE DESCRIPTION: wpa_supplicant: wpa_supplicant (WPA/WPA2/IEEE 802.1X Supplicant) wpa_supplicant: wpa_supplicant: wpa_supplicant is a WPA Supplicant for Linux with support for wpa_supplicant: WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the wpa_supplicant: IEEE 802.1X/WPA component that is used in the client stations. wpa_supplicant: It implements key negotiation with a WPA Authenticator and it wpa_supplicant: controls the roaming and IEEE 802.11 authentication/association wpa_supplicant: of the wlan driver. wpa_supplicant: wpa_supplicant: More info: http://hostap.epitest.fi/wpa_supplicant/ wpa_supplicant: PACKAGE NAME: wv2-0.2.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 319 K PACKAGE SIZE (uncompressed): 1170 K PACKAGE DESCRIPTION: wv2: wv2 (MS Word document import library) wv2: wv2: wv2 is a portable MS Word .doc import filter that is used by KWord. wv2: Currently, it supports MS Word 6, MS Word 95, MS Word 97, MS Word wv2: 2000, and MS Word 2002 (XP) documents. Older versions like Word 2, 3, wv2: 4, and 5 aren't supported yet, but might be in the future. wv2: wv2: wv2's authors are Shaheed Haque, Werner Trobin, and David Faure. wv2: PACKAGE NAME: x11-skel-7.1-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: x11-skel: x11-skel (Miscellaneous things required for X) x11-skel: x11-skel: These are some symlinks needed by X11 after moving some files and x11-skel: directories to conform with the Linux FHS. For example, the fonts x11-skel: are now in the /usr/share/fonts directory, and this package makes x11-skel: a symlink to there from /usr/lib/X11/fonts (the default location). x11-skel: An /etc/xdg directory (the default for XDG_CONFIG_DIRS in the x11-skel: XDG Base Directory Specification) is also contained in this package, x11-skel: as well as sample xorg.conf files and other scripts. x11-skel: PACKAGE NAME: x11perf-1.4.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 60 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: x11perf: x11perf x11perf: x11perf: x11perf is part of X11. x11perf: x11perf: For more information about the X.Org Foundation (the providers of the x11perf: X.Org implementation of the X Window System), see their website: x11perf: x11perf: http://www.x.org x11perf: PACKAGE NAME: x3270-3.3.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 582 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE DESCRIPTION: x3270: x3270 (IBM host access tool for X) x3270: x3270: x3270 opens a telnet connection to an IBM host in an X window. Since x3270: the window created by x3270 can use its own font for displaying x3270: characters, is a fairly accurate representation of an IBM 3278. x3270: PACKAGE NAME: xauth-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xauth: xauth xauth: xauth: xauth is part of X11. xauth: xauth: For more information about the X.Org Foundation (the providers of the xauth: X.Org implementation of the X Window System), see their website: xauth: xauth: http://www.x.org xauth: PACKAGE NAME: xaw3d-1.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 186 K PACKAGE SIZE (uncompressed): 740 K PACKAGE DESCRIPTION: xaw3d: xaw3d (3D version of libXaw) xaw3d: xaw3d: Xaw3d is a set of 3D widgets by Kaleb S. Keithley based on the Athena xaw3d: Widget set. The Three-D Athena may be used as a replacement for the xaw3d: Athena (Xaw) Widget set -- you may relink almost any Athena Widget xaw3d: based application and obtain a three dimensional appearance on some of xaw3d: the widgets. You can also replace your shared libXaw with libXaw3d xaw3d: and obtain the three dimensional appearance without even relinking. xaw3d: PACKAGE NAME: xbiff-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xbiff: xbiff xbiff: xbiff: xbiff is part of X11. xbiff: xbiff: For more information about the X.Org Foundation (the providers of the xbiff: X.Org implementation of the X Window System), see their website: xbiff: xbiff: http://www.x.org xbiff: PACKAGE NAME: xbitmaps-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 240 K PACKAGE DESCRIPTION: xbitmaps: xbitmaps xbitmaps: xbitmaps: xbitmaps is part of X11. xbitmaps: xbitmaps: For more information about the X.Org Foundation (the providers of the xbitmaps: X.Org implementation of the X Window System), see their website: xbitmaps: xbitmaps: http://www.x.org xbitmaps: PACKAGE NAME: xcalc-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: xcalc: xcalc xcalc: xcalc: xcalc is part of X11. xcalc: xcalc: For more information about the X.Org Foundation (the providers of the xcalc: X.Org implementation of the X Window System), see their website: xcalc: xcalc: http://www.x.org xcalc: PACKAGE NAME: xcb-proto-1.0-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 280 K PACKAGE DESCRIPTION: xcb-proto: xcb-proto xcb-proto: xcb-proto: xcb-proto is part of X11. xcb-proto: xcb-proto: For more information about the X.Org Foundation (the providers of the xcb-proto: X.Org implementation of the X Window System), see their website: xcb-proto: xcb-proto: http://www.x.org xcb-proto: PACKAGE NAME: xchat-2.8.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 2292 K PACKAGE SIZE (uncompressed): 5810 K PACKAGE DESCRIPTION: xchat: xchat xchat: xchat: X-Chat is a GTK+-based IRC (Internet Relay Chat) client. xchat: PACKAGE NAME: xclipboard-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xclipboard: xclipboard xclipboard: xclipboard: xclipboard is part of X11. xclipboard: xclipboard: For more information about the X.Org Foundation (the providers of the xclipboard: X.Org implementation of the X Window System), see their website: xclipboard: xclipboard: http://www.x.org xclipboard: PACKAGE NAME: xclock-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xclock: xclock xclock: xclock: xclock is part of X11. xclock: xclock: For more information about the X.Org Foundation (the providers of the xclock: X.Org implementation of the X Window System), see their website: xclock: xclock: http://www.x.org xclock: PACKAGE NAME: xcmiscproto-1.1.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xcmiscproto: xcmiscproto xcmiscproto: xcmiscproto: xcmiscproto is part of X11. xcmiscproto: xcmiscproto: For more information about the X.Org Foundation (the providers of the xcmiscproto: X.Org implementation of the X Window System), see their website: xcmiscproto: xcmiscproto: http://www.x.org xcmiscproto: PACKAGE NAME: xcmsdb-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xcmsdb: xcmsdb xcmsdb: xcmsdb: xcmsdb is part of X11. xcmsdb: xcmsdb: For more information about the X.Org Foundation (the providers of the xcmsdb: X.Org implementation of the X Window System), see their website: xcmsdb: xcmsdb: http://www.x.org xcmsdb: PACKAGE NAME: xconsole-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xconsole: xconsole xconsole: xconsole: xconsole is part of X11. xconsole: xconsole: For more information about the X.Org Foundation (the providers of the xconsole: X.Org implementation of the X Window System), see their website: xconsole: xconsole: http://www.x.org xconsole: PACKAGE NAME: xcursor-themes-1.0.1-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 437 K PACKAGE SIZE (uncompressed): 3430 K PACKAGE DESCRIPTION: xcursor-themes: xcursor-themes xcursor-themes: xcursor-themes: xcursor-themes is part of X11. xcursor-themes: xcursor-themes: For more information about the X.Org Foundation (the providers of the xcursor-themes: X.Org implementation of the X Window System), see their website: xcursor-themes: xcursor-themes: http://www.x.org xcursor-themes: PACKAGE NAME: xcursorgen-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xcursorgen: xcursorgen xcursorgen: xcursorgen: xcursorgen is part of X11. xcursorgen: xcursorgen: For more information about the X.Org Foundation (the providers of the xcursorgen: X.Org implementation of the X Window System), see their website: xcursorgen: xcursorgen: http://www.x.org xcursorgen: PACKAGE NAME: xdbedizzy-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xdbedizzy: xdbedizzy xdbedizzy: xdbedizzy: xdbedizzy is part of X11. xdbedizzy: xdbedizzy: For more information about the X.Org Foundation (the providers of the xdbedizzy: X.Org implementation of the X Window System), see their website: xdbedizzy: xdbedizzy: http://www.x.org xdbedizzy: PACKAGE NAME: xditview-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: xditview: xditview xditview: xditview: xditview is part of X11. xditview: xditview: For more information about the X.Org Foundation (the providers of the xditview: X.Org implementation of the X Window System), see their website: xditview: xditview: http://www.x.org xditview: PACKAGE NAME: xdm-1.1.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 113 K PACKAGE SIZE (uncompressed): 320 K PACKAGE DESCRIPTION: xdm: xdm xdm: xdm: xdm is part of X11. xdm: xdm: For more information about the X.Org Foundation (the providers of the xdm: X.Org implementation of the X Window System), see their website: xdm: xdm: http://www.x.org xdm: PACKAGE NAME: xdpyinfo-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xdpyinfo: xdpyinfo xdpyinfo: xdpyinfo: xdpyinfo is part of X11. xdpyinfo: xdpyinfo: For more information about the X.Org Foundation (the providers of the xdpyinfo: X.Org implementation of the X Window System), see their website: xdpyinfo: xdpyinfo: http://www.x.org xdpyinfo: PACKAGE NAME: xdriinfo-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xdriinfo: xdriinfo xdriinfo: xdriinfo: xdriinfo is part of X11. xdriinfo: xdriinfo: For more information about the X.Org Foundation (the providers of the xdriinfo: X.Org implementation of the X Window System), see their website: xdriinfo: xdriinfo: http://www.x.org xdriinfo: PACKAGE NAME: xedit-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 320 K PACKAGE SIZE (uncompressed): 850 K PACKAGE DESCRIPTION: xedit: xedit xedit: xedit: xedit is part of X11. xedit: xedit: For more information about the X.Org Foundation (the providers of the xedit: X.Org implementation of the X Window System), see their website: xedit: xedit: http://www.x.org xedit: PACKAGE NAME: xev-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xev: xev xev: xev: xev is part of X11. xev: xev: For more information about the X.Org Foundation (the providers of the xev: X.Org implementation of the X Window System), see their website: xev: xev: http://www.x.org xev: PACKAGE NAME: xextproto-7.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 37 K PACKAGE SIZE (uncompressed): 240 K PACKAGE DESCRIPTION: xextproto: xextproto xextproto: xextproto: xextproto is part of X11. xextproto: xextproto: For more information about the X.Org Foundation (the providers of the xextproto: X.Org implementation of the X Window System), see their website: xextproto: xextproto: http://www.x.org xextproto: PACKAGE NAME: xeyes-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xeyes: xeyes xeyes: xeyes: xeyes is part of X11. xeyes: xeyes: For more information about the X.Org Foundation (the providers of the xeyes: X.Org implementation of the X Window System), see their website: xeyes: xeyes: http://www.x.org xeyes: PACKAGE NAME: xf86-input-acecad-1.2.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-input-acecad: xf86-input-acecad xf86-input-acecad: xf86-input-acecad: xf86-input-acecad is part of X11. xf86-input-acecad: xf86-input-acecad: For more information about the X.Org Foundation (the providers of the xf86-input-acecad: X.Org implementation of the X Window System), see their website: xf86-input-acecad: xf86-input-acecad: http://www.x.org xf86-input-acecad: PACKAGE NAME: xf86-input-aiptek-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-input-aiptek: xf86-input-aiptek xf86-input-aiptek: xf86-input-aiptek: xf86-input-aiptek is part of X11. xf86-input-aiptek: xf86-input-aiptek: For more information about the X.Org Foundation (the providers of the xf86-input-aiptek: X.Org implementation of the X Window System), see their website: xf86-input-aiptek: xf86-input-aiptek: http://www.x.org xf86-input-aiptek: PACKAGE NAME: xf86-input-calcomp-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-calcomp: xf86-input-calcomp xf86-input-calcomp: xf86-input-calcomp: xf86-input-calcomp is part of X11. xf86-input-calcomp: xf86-input-calcomp: For more information about the X.Org Foundation (the providers of the xf86-input-calcomp: X.Org implementation of the X Window System), see their website: xf86-input-calcomp: xf86-input-calcomp: http://www.x.org xf86-input-calcomp: PACKAGE NAME: xf86-input-digitaledge-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-digitaledge: xf86-input-digitaledge xf86-input-digitaledge: xf86-input-digitaledge: xf86-input-digitaledge is part of X11. xf86-input-digitaledge: xf86-input-digitaledge: For more information about the X.Org Foundation (the providers of the xf86-input-digitaledge: X.Org implementation of the X Window System), see their website: xf86-input-digitaledge: xf86-input-digitaledge: http://www.x.org xf86-input-digitaledge: PACKAGE NAME: xf86-input-elographics-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-elographics: xf86-input-elographics xf86-input-elographics: xf86-input-elographics: xf86-input-elographics is part of X11. xf86-input-elographics: xf86-input-elographics: For more information about the X.Org Foundation (the providers of the xf86-input-elographics: X.Org implementation of the X Window System), see their website: xf86-input-elographics: xf86-input-elographics: http://www.x.org xf86-input-elographics: PACKAGE NAME: xf86-input-evdev-1.1.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xf86-input-evdev: xf86-input-evdev xf86-input-evdev: xf86-input-evdev: xf86-input-evdev is part of X11. xf86-input-evdev: xf86-input-evdev: For more information about the X.Org Foundation (the providers of the xf86-input-evdev: X.Org implementation of the X Window System), see their website: xf86-input-evdev: xf86-input-evdev: http://www.x.org xf86-input-evdev: PACKAGE NAME: xf86-input-fpit-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-fpit: xf86-input-fpit xf86-input-fpit: xf86-input-fpit: xf86-input-fpit is part of X11. xf86-input-fpit: xf86-input-fpit: For more information about the X.Org Foundation (the providers of the xf86-input-fpit: X.Org implementation of the X Window System), see their website: xf86-input-fpit: xf86-input-fpit: http://www.x.org xf86-input-fpit: PACKAGE NAME: xf86-input-hyperpen-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-hyperpen: xf86-input-hyperpen xf86-input-hyperpen: xf86-input-hyperpen: xf86-input-hyperpen is part of X11. xf86-input-hyperpen: xf86-input-hyperpen: For more information about the X.Org Foundation (the providers of the xf86-input-hyperpen: X.Org implementation of the X Window System), see their website: xf86-input-hyperpen: xf86-input-hyperpen: http://www.x.org xf86-input-hyperpen: PACKAGE NAME: xf86-input-jamstudio-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-jamstudio: xf86-input-jamstudio xf86-input-jamstudio: xf86-input-jamstudio: xf86-input-jamstudio is part of X11. xf86-input-jamstudio: xf86-input-jamstudio: For more information about the X.Org Foundation (the providers of the xf86-input-jamstudio: X.Org implementation of the X Window System), see their website: xf86-input-jamstudio: xf86-input-jamstudio: http://www.x.org xf86-input-jamstudio: PACKAGE NAME: xf86-input-joystick-1.2.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-input-joystick: xf86-input-joystick xf86-input-joystick: xf86-input-joystick: xf86-input-joystick is part of X11. xf86-input-joystick: xf86-input-joystick: For more information about the X.Org Foundation (the providers of the xf86-input-joystick: X.Org implementation of the X Window System), see their website: xf86-input-joystick: xf86-input-joystick: http://www.x.org xf86-input-joystick: PACKAGE NAME: xf86-input-keyboard-1.2.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-input-keyboard: xf86-input-keyboard xf86-input-keyboard: xf86-input-keyboard: xf86-input-keyboard is part of X11. xf86-input-keyboard: xf86-input-keyboard: For more information about the X.Org Foundation (the providers of the xf86-input-keyboard: X.Org implementation of the X Window System), see their website: xf86-input-keyboard: xf86-input-keyboard: http://www.x.org xf86-input-keyboard: PACKAGE NAME: xf86-input-magellan-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-magellan: xf86-input-magellan xf86-input-magellan: xf86-input-magellan: xf86-input-magellan is part of X11. xf86-input-magellan: xf86-input-magellan: For more information about the X.Org Foundation (the providers of the xf86-input-magellan: X.Org implementation of the X Window System), see their website: xf86-input-magellan: xf86-input-magellan: http://www.x.org xf86-input-magellan: PACKAGE NAME: xf86-input-magictouch-1.0.0.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xf86-input-magictouch: xf86-input-magictouch xf86-input-magictouch: xf86-input-magictouch: xf86-input-magictouch is part of X11. xf86-input-magictouch: xf86-input-magictouch: For more information about the X.Org Foundation (the providers of the xf86-input-magictouch: X.Org implementation of the X Window System), see their website: xf86-input-magictouch: xf86-input-magictouch: http://www.x.org xf86-input-magictouch: PACKAGE NAME: xf86-input-mouse-1.2.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: xf86-input-mouse: xf86-input-mouse xf86-input-mouse: xf86-input-mouse: xf86-input-mouse is part of X11. xf86-input-mouse: xf86-input-mouse: For more information about the X.Org Foundation (the providers of the xf86-input-mouse: X.Org implementation of the X Window System), see their website: xf86-input-mouse: xf86-input-mouse: http://www.x.org xf86-input-mouse: PACKAGE NAME: xf86-input-mutouch-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-mutouch: xf86-input-mutouch xf86-input-mutouch: xf86-input-mutouch: xf86-input-mutouch is part of X11. xf86-input-mutouch: xf86-input-mutouch: For more information about the X.Org Foundation (the providers of the xf86-input-mutouch: X.Org implementation of the X Window System), see their website: xf86-input-mutouch: xf86-input-mutouch: http://www.x.org xf86-input-mutouch: PACKAGE NAME: xf86-input-palmax-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-palmax: xf86-input-palmax xf86-input-palmax: xf86-input-palmax: xf86-input-palmax is part of X11. xf86-input-palmax: xf86-input-palmax: For more information about the X.Org Foundation (the providers of the xf86-input-palmax: X.Org implementation of the X Window System), see their website: xf86-input-palmax: xf86-input-palmax: http://www.x.org xf86-input-palmax: PACKAGE NAME: xf86-input-spaceorb-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-spaceorb: xf86-input-spaceorb xf86-input-spaceorb: xf86-input-spaceorb: xf86-input-spaceorb is part of X11. xf86-input-spaceorb: xf86-input-spaceorb: For more information about the X.Org Foundation (the providers of the xf86-input-spaceorb: X.Org implementation of the X Window System), see their website: xf86-input-spaceorb: xf86-input-spaceorb: http://www.x.org xf86-input-spaceorb: PACKAGE NAME: xf86-input-summa-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-summa: xf86-input-summa xf86-input-summa: xf86-input-summa: xf86-input-summa is part of X11. xf86-input-summa: xf86-input-summa: For more information about the X.Org Foundation (the providers of the xf86-input-summa: X.Org implementation of the X Window System), see their website: xf86-input-summa: xf86-input-summa: http://www.x.org xf86-input-summa: PACKAGE NAME: xf86-input-tek4957-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-tek4957: xf86-input-tek4957 xf86-input-tek4957: xf86-input-tek4957: xf86-input-tek4957 is part of X11. xf86-input-tek4957: xf86-input-tek4957: For more information about the X.Org Foundation (the providers of the xf86-input-tek4957: X.Org implementation of the X Window System), see their website: xf86-input-tek4957: xf86-input-tek4957: http://www.x.org xf86-input-tek4957: PACKAGE NAME: xf86-input-ur98-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-input-ur98: xf86-input-ur98 xf86-input-ur98: xf86-input-ur98: xf86-input-ur98 is part of X11. xf86-input-ur98: xf86-input-ur98: For more information about the X.Org Foundation (the providers of the xf86-input-ur98: X.Org implementation of the X Window System), see their website: xf86-input-ur98: xf86-input-ur98: http://www.x.org xf86-input-ur98: PACKAGE NAME: xf86-input-vmmouse-12.4.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-input-vmmouse: xf86-input-vmmouse xf86-input-vmmouse: xf86-input-vmmouse: xf86-input-vmmouse is part of X11. xf86-input-vmmouse: xf86-input-vmmouse: For more information about the X.Org Foundation (the providers of the xf86-input-vmmouse: X.Org implementation of the X Window System), see their website: xf86-input-vmmouse: xf86-input-vmmouse: http://www.x.org xf86-input-vmmouse: PACKAGE NAME: xf86-input-void-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xf86-input-void: xf86-input-void xf86-input-void: xf86-input-void: xf86-input-void is part of X11. xf86-input-void: xf86-input-void: For more information about the X.Org Foundation (the providers of the xf86-input-void: X.Org implementation of the X Window System), see their website: xf86-input-void: xf86-input-void: http://www.x.org xf86-input-void: PACKAGE NAME: xf86-video-apm-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 62 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: xf86-video-apm: xf86-video-apm xf86-video-apm: xf86-video-apm: xf86-video-apm is part of X11. xf86-video-apm: xf86-video-apm: For more information about the X.Org Foundation (the providers of the xf86-video-apm: X.Org implementation of the X Window System), see their website: xf86-video-apm: xf86-video-apm: http://www.x.org xf86-video-apm: PACKAGE NAME: xf86-video-ark-0.6.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-video-ark: xf86-video-ark xf86-video-ark: xf86-video-ark: xf86-video-ark is part of X11. xf86-video-ark: xf86-video-ark: For more information about the X.Org Foundation (the providers of the xf86-video-ark: X.Org implementation of the X Window System), see their website: xf86-video-ark: xf86-video-ark: http://www.x.org xf86-video-ark: PACKAGE NAME: xf86-video-ast-0.81.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xf86-video-ast: xf86-video-ast xf86-video-ast: xf86-video-ast: xf86-video-ast is part of X11. xf86-video-ast: xf86-video-ast: For more information about the X.Org Foundation (the providers of the xf86-video-ast: X.Org implementation of the X Window System), see their website: xf86-video-ast: xf86-video-ast: http://www.x.org xf86-video-ast: PACKAGE NAME: xf86-video-ati-6.6.192-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 326 K PACKAGE SIZE (uncompressed): 820 K PACKAGE DESCRIPTION: xf86-video-ati: xf86-video-ati xf86-video-ati: xf86-video-ati: xf86-video-ati is part of X11. xf86-video-ati: xf86-video-ati: For more information about the X.Org Foundation (the providers of the xf86-video-ati: X.Org implementation of the X Window System), see their website: xf86-video-ati: xf86-video-ati: http://www.x.org xf86-video-ati: PACKAGE NAME: xf86-video-chips-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 67 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: xf86-video-chips: xf86-video-chips xf86-video-chips: xf86-video-chips: xf86-video-chips is part of X11. xf86-video-chips: xf86-video-chips: For more information about the X.Org Foundation (the providers of the xf86-video-chips: X.Org implementation of the X Window System), see their website: xf86-video-chips: xf86-video-chips: http://www.x.org xf86-video-chips: PACKAGE NAME: xf86-video-cirrus-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: xf86-video-cirrus: xf86-video-cirrus xf86-video-cirrus: xf86-video-cirrus: xf86-video-cirrus is part of X11. xf86-video-cirrus: xf86-video-cirrus: For more information about the X.Org Foundation (the providers of the xf86-video-cirrus: X.Org implementation of the X Window System), see their website: xf86-video-cirrus: xf86-video-cirrus: http://www.x.org xf86-video-cirrus: PACKAGE NAME: xf86-video-cyrix-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xf86-video-cyrix: xf86-video-cyrix xf86-video-cyrix: xf86-video-cyrix: xf86-video-cyrix is part of X11. xf86-video-cyrix: xf86-video-cyrix: For more information about the X.Org Foundation (the providers of the xf86-video-cyrix: X.Org implementation of the X Window System), see their website: xf86-video-cyrix: xf86-video-cyrix: http://www.x.org xf86-video-cyrix: PACKAGE NAME: xf86-video-dummy-0.2.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-video-dummy: xf86-video-dummy xf86-video-dummy: xf86-video-dummy: xf86-video-dummy is part of X11. xf86-video-dummy: xf86-video-dummy: For more information about the X.Org Foundation (the providers of the xf86-video-dummy: X.Org implementation of the X Window System), see their website: xf86-video-dummy: xf86-video-dummy: http://www.x.org xf86-video-dummy: PACKAGE NAME: xf86-video-fbdev-0.3.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-video-fbdev: xf86-video-fbdev xf86-video-fbdev: xf86-video-fbdev: xf86-video-fbdev is part of X11. xf86-video-fbdev: xf86-video-fbdev: For more information about the X.Org Foundation (the providers of the xf86-video-fbdev: X.Org implementation of the X Window System), see their website: xf86-video-fbdev: xf86-video-fbdev: http://www.x.org xf86-video-fbdev: PACKAGE NAME: xf86-video-glint-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 300 K PACKAGE DESCRIPTION: xf86-video-glint: xf86-video-glint xf86-video-glint: xf86-video-glint: xf86-video-glint is part of X11. xf86-video-glint: xf86-video-glint: For more information about the X.Org Foundation (the providers of the xf86-video-glint: X.Org implementation of the X Window System), see their website: xf86-video-glint: xf86-video-glint: http://www.x.org xf86-video-glint: PACKAGE NAME: xf86-video-i128-1.2.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: xf86-video-i128: xf86-video-i128 xf86-video-i128: xf86-video-i128: xf86-video-i128 is part of X11. xf86-video-i128: xf86-video-i128: For more information about the X.Org Foundation (the providers of the xf86-video-i128: X.Org implementation of the X Window System), see their website: xf86-video-i128: xf86-video-i128: http://www.x.org xf86-video-i128: PACKAGE NAME: xf86-video-i740-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xf86-video-i740: xf86-video-i740 xf86-video-i740: xf86-video-i740: xf86-video-i740 is part of X11. xf86-video-i740: xf86-video-i740: For more information about the X.Org Foundation (the providers of the xf86-video-i740: X.Org implementation of the X Window System), see their website: xf86-video-i740: xf86-video-i740: http://www.x.org xf86-video-i740: PACKAGE NAME: xf86-video-i810-1.7.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 154 K PACKAGE SIZE (uncompressed): 360 K PACKAGE DESCRIPTION: xf86-video-i810: xf86-video-i810 xf86-video-i810: xf86-video-i810: xf86-video-i810 is part of X11. xf86-video-i810: xf86-video-i810: For more information about the X.Org Foundation (the providers of the xf86-video-i810: X.Org implementation of the X Window System), see their website: xf86-video-i810: xf86-video-i810: http://www.x.org xf86-video-i810: PACKAGE NAME: xf86-video-imstt-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-video-imstt: xf86-video-imstt xf86-video-imstt: xf86-video-imstt: xf86-video-imstt is part of X11. xf86-video-imstt: xf86-video-imstt: For more information about the X.Org Foundation (the providers of the xf86-video-imstt: X.Org implementation of the X Window System), see their website: xf86-video-imstt: xf86-video-imstt: http://www.x.org xf86-video-imstt: PACKAGE NAME: xf86-video-intel-2.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 168 K PACKAGE SIZE (uncompressed): 440 K PACKAGE DESCRIPTION: xf86-video-intel: xf86-video-intel xf86-video-intel: xf86-video-intel: xf86-video-intel is part of X11. xf86-video-intel: xf86-video-intel: For more information about the X.Org Foundation (the providers of the xf86-video-intel: X.Org implementation of the X Window System), see their website: xf86-video-intel: xf86-video-intel: http://www.x.org xf86-video-intel: PACKAGE NAME: xf86-video-mga-1.4.6.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 77 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: xf86-video-mga: xf86-video-mga xf86-video-mga: xf86-video-mga: xf86-video-mga is part of X11. xf86-video-mga: xf86-video-mga: For more information about the X.Org Foundation (the providers of the xf86-video-mga: X.Org implementation of the X Window System), see their website: xf86-video-mga: xf86-video-mga: http://www.x.org xf86-video-mga: PACKAGE NAME: xf86-video-neomagic-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: xf86-video-neomagic: xf86-video-neomagic xf86-video-neomagic: xf86-video-neomagic: xf86-video-neomagic is part of X11. xf86-video-neomagic: xf86-video-neomagic: For more information about the X.Org Foundation (the providers of the xf86-video-neomagic: X.Org implementation of the X Window System), see their website: xf86-video-neomagic: xf86-video-neomagic: http://www.x.org xf86-video-neomagic: PACKAGE NAME: xf86-video-newport-0.2.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xf86-video-newport: xf86-video-newport xf86-video-newport: xf86-video-newport: xf86-video-newport is part of X11. xf86-video-newport: xf86-video-newport: For more information about the X.Org Foundation (the providers of the xf86-video-newport: X.Org implementation of the X Window System), see their website: xf86-video-newport: xf86-video-newport: http://www.x.org xf86-video-newport: PACKAGE NAME: xf86-video-nsc-2.8.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 126 K PACKAGE SIZE (uncompressed): 350 K PACKAGE DESCRIPTION: xf86-video-nsc: xf86-video-nsc xf86-video-nsc: xf86-video-nsc: xf86-video-nsc is part of X11. xf86-video-nsc: xf86-video-nsc: For more information about the X.Org Foundation (the providers of the xf86-video-nsc: X.Org implementation of the X Window System), see their website: xf86-video-nsc: xf86-video-nsc: http://www.x.org xf86-video-nsc: PACKAGE NAME: xf86-video-nv-2.1.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 82 K PACKAGE SIZE (uncompressed): 200 K PACKAGE DESCRIPTION: xf86-video-nv: xf86-video-nv xf86-video-nv: xf86-video-nv: xf86-video-nv is part of X11. xf86-video-nv: xf86-video-nv: For more information about the X.Org Foundation (the providers of the xf86-video-nv: X.Org implementation of the X Window System), see their website: xf86-video-nv: xf86-video-nv: http://www.x.org xf86-video-nv: PACKAGE NAME: xf86-video-rendition-4.1.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 45 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: xf86-video-rendition: xf86-video-rendition xf86-video-rendition: xf86-video-rendition: xf86-video-rendition is part of X11. xf86-video-rendition: xf86-video-rendition: For more information about the X.Org Foundation (the providers of the xf86-video-rendition: X.Org implementation of the X Window System), see their website: xf86-video-rendition: xf86-video-rendition: http://www.x.org xf86-video-rendition: PACKAGE NAME: xf86-video-s3-0.5.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: xf86-video-s3: xf86-video-s3 xf86-video-s3: xf86-video-s3: xf86-video-s3 is part of X11. xf86-video-s3: xf86-video-s3: For more information about the X.Org Foundation (the providers of the xf86-video-s3: X.Org implementation of the X Window System), see their website: xf86-video-s3: xf86-video-s3: http://www.x.org xf86-video-s3: PACKAGE NAME: xf86-video-s3virge-1.9.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 37 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: xf86-video-s3virge: xf86-video-s3virge xf86-video-s3virge: xf86-video-s3virge: xf86-video-s3virge is part of X11. xf86-video-s3virge: xf86-video-s3virge: For more information about the X.Org Foundation (the providers of the xf86-video-s3virge: X.Org implementation of the X Window System), see their website: xf86-video-s3virge: xf86-video-s3virge: http://www.x.org xf86-video-s3virge: PACKAGE NAME: xf86-video-savage-2.1.2-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 68 K PACKAGE SIZE (uncompressed): 170 K PACKAGE DESCRIPTION: xf86-video-savage: xf86-video-savage xf86-video-savage: xf86-video-savage: xf86-video-savage is part of X11. xf86-video-savage: xf86-video-savage: For more information about the X.Org Foundation (the providers of the xf86-video-savage: X.Org implementation of the X Window System), see their website: xf86-video-savage: xf86-video-savage: http://www.x.org xf86-video-savage: PACKAGE NAME: xf86-video-siliconmotion-1.5.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: xf86-video-siliconmotion: xf86-video-siliconmotion xf86-video-siliconmotion: xf86-video-siliconmotion: xf86-video-siliconmotion is part of X11. xf86-video-siliconmotion: xf86-video-siliconmotion: For more information about the X.Org Foundation (the providers of the xf86-video-siliconmotion: X.Org implementation of the X Window System), see their website: xf86-video-siliconmotion: xf86-video-siliconmotion: http://www.x.org xf86-video-siliconmotion: PACKAGE NAME: xf86-video-sis-0.9.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 265 K PACKAGE SIZE (uncompressed): 600 K PACKAGE DESCRIPTION: xf86-video-sis: xf86-video-sis xf86-video-sis: xf86-video-sis: xf86-video-sis is part of X11. xf86-video-sis: xf86-video-sis: For more information about the X.Org Foundation (the providers of the xf86-video-sis: X.Org implementation of the X Window System), see their website: xf86-video-sis: xf86-video-sis: http://www.x.org xf86-video-sis: PACKAGE NAME: xf86-video-sisusb-0.8.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: xf86-video-sisusb: xf86-video-sisusb xf86-video-sisusb: xf86-video-sisusb: xf86-video-sisusb is part of X11. xf86-video-sisusb: xf86-video-sisusb: For more information about the X.Org Foundation (the providers of the xf86-video-sisusb: X.Org implementation of the X Window System), see their website: xf86-video-sisusb: xf86-video-sisusb: http://www.x.org xf86-video-sisusb: PACKAGE NAME: xf86-video-tdfx-1.3.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: xf86-video-tdfx: xf86-video-tdfx xf86-video-tdfx: xf86-video-tdfx: xf86-video-tdfx is part of X11. xf86-video-tdfx: xf86-video-tdfx: For more information about the X.Org Foundation (the providers of the xf86-video-tdfx: X.Org implementation of the X Window System), see their website: xf86-video-tdfx: xf86-video-tdfx: http://www.x.org xf86-video-tdfx: PACKAGE NAME: xf86-video-tga-1.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: xf86-video-tga: xf86-video-tga xf86-video-tga: xf86-video-tga: xf86-video-tga is part of X11. xf86-video-tga: xf86-video-tga: For more information about the X.Org Foundation (the providers of the xf86-video-tga: X.Org implementation of the X Window System), see their website: xf86-video-tga: xf86-video-tga: http://www.x.org xf86-video-tga: PACKAGE NAME: xf86-video-trident-1.2.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 70 K PACKAGE SIZE (uncompressed): 190 K PACKAGE DESCRIPTION: xf86-video-trident: xf86-video-trident xf86-video-trident: xf86-video-trident: xf86-video-trident is part of X11. xf86-video-trident: xf86-video-trident: For more information about the X.Org Foundation (the providers of the xf86-video-trident: X.Org implementation of the X Window System), see their website: xf86-video-trident: xf86-video-trident: http://www.x.org xf86-video-trident: PACKAGE NAME: xf86-video-tseng-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: xf86-video-tseng: xf86-video-tseng xf86-video-tseng: xf86-video-tseng: xf86-video-tseng is part of X11. xf86-video-tseng: xf86-video-tseng: For more information about the X.Org Foundation (the providers of the xf86-video-tseng: X.Org implementation of the X Window System), see their website: xf86-video-tseng: xf86-video-tseng: http://www.x.org xf86-video-tseng: PACKAGE NAME: xf86-video-v4l-0.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86-video-v4l: xf86-video-v4l xf86-video-v4l: xf86-video-v4l: xf86-video-v4l is part of X11. xf86-video-v4l: xf86-video-v4l: For more information about the X.Org Foundation (the providers of the xf86-video-v4l: X.Org implementation of the X Window System), see their website: xf86-video-v4l: xf86-video-v4l: http://www.x.org xf86-video-v4l: PACKAGE NAME: xf86-video-vesa-1.3.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-video-vesa: xf86-video-vesa xf86-video-vesa: xf86-video-vesa: xf86-video-vesa is part of X11. xf86-video-vesa: xf86-video-vesa: For more information about the X.Org Foundation (the providers of the xf86-video-vesa: X.Org implementation of the X Window System), see their website: xf86-video-vesa: xf86-video-vesa: http://www.x.org xf86-video-vesa: PACKAGE NAME: xf86-video-vga-4.1.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86-video-vga: xf86-video-vga xf86-video-vga: xf86-video-vga: xf86-video-vga is part of X11. xf86-video-vga: xf86-video-vga: For more information about the X.Org Foundation (the providers of the xf86-video-vga: X.Org implementation of the X Window System), see their website: xf86-video-vga: xf86-video-vga: http://www.x.org xf86-video-vga: PACKAGE NAME: xf86-video-via-0.2.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 137 K PACKAGE SIZE (uncompressed): 390 K PACKAGE DESCRIPTION: xf86-video-via: xf86-video-via xf86-video-via: xf86-video-via: xf86-video-via is part of X11. xf86-video-via: xf86-video-via: For more information about the X.Org Foundation (the providers of the xf86-video-via: X.Org implementation of the X Window System), see their website: xf86-video-via: xf86-video-via: http://www.x.org xf86-video-via: PACKAGE NAME: xf86-video-vmware-10.15.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xf86-video-vmware: xf86-video-vmware xf86-video-vmware: xf86-video-vmware: xf86-video-vmware is part of X11. xf86-video-vmware: xf86-video-vmware: For more information about the X.Org Foundation (the providers of the xf86-video-vmware: X.Org implementation of the X Window System), see their website: xf86-video-vmware: xf86-video-vmware: http://www.x.org xf86-video-vmware: PACKAGE NAME: xf86-video-voodoo-1.1.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xf86-video-voodoo: xf86-video-voodoo xf86-video-voodoo: xf86-video-voodoo: xf86-video-voodoo is part of X11. xf86-video-voodoo: xf86-video-voodoo: For more information about the X.Org Foundation (the providers of the xf86-video-voodoo: X.Org implementation of the X Window System), see their website: xf86-video-voodoo: xf86-video-voodoo: http://www.x.org xf86-video-voodoo: PACKAGE NAME: xf86bigfontproto-1.1.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xf86bigfontproto: xf86bigfontproto xf86bigfontproto: xf86bigfontproto: xf86bigfontproto is part of X11. xf86bigfontproto: xf86bigfontproto: For more information about the X.Org Foundation (the providers of the xf86bigfontproto: X.Org implementation of the X Window System), see their website: xf86bigfontproto: xf86bigfontproto: http://www.x.org xf86bigfontproto: PACKAGE NAME: xf86dga-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xf86dga: xf86dga xf86dga: xf86dga: xf86dga is part of X11. xf86dga: xf86dga: For more information about the X.Org Foundation (the providers of the xf86dga: X.Org implementation of the X Window System), see their website: xf86dga: xf86dga: http://www.x.org xf86dga: PACKAGE NAME: xf86dgaproto-2.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xf86dgaproto: xf86dgaproto xf86dgaproto: xf86dgaproto: xf86dgaproto is part of X11. xf86dgaproto: xf86dgaproto: For more information about the X.Org Foundation (the providers of the xf86dgaproto: X.Org implementation of the X Window System), see their website: xf86dgaproto: xf86dgaproto: http://www.x.org xf86dgaproto: PACKAGE NAME: xf86driproto-2.0.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xf86driproto: xf86driproto xf86driproto: xf86driproto: xf86driproto is part of X11. xf86driproto: xf86driproto: For more information about the X.Org Foundation (the providers of the xf86driproto: X.Org implementation of the X Window System), see their website: xf86driproto: xf86driproto: http://www.x.org xf86driproto: PACKAGE NAME: xf86miscproto-0.9.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xf86miscproto: xf86miscproto xf86miscproto: xf86miscproto: xf86miscproto is part of X11. xf86miscproto: xf86miscproto: For more information about the X.Org Foundation (the providers of the xf86miscproto: X.Org implementation of the X Window System), see their website: xf86miscproto: xf86miscproto: http://www.x.org xf86miscproto: PACKAGE NAME: xf86rushproto-1.1.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xf86rushproto: xf86rushproto xf86rushproto: xf86rushproto: xf86rushproto is part of X11. xf86rushproto: xf86rushproto: For more information about the X.Org Foundation (the providers of the xf86rushproto: X.Org implementation of the X Window System), see their website: xf86rushproto: xf86rushproto: http://www.x.org xf86rushproto: PACKAGE NAME: xf86vidmodeproto-2.2.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xf86vidmodeproto: xf86vidmodeproto xf86vidmodeproto: xf86vidmodeproto: xf86vidmodeproto is part of X11. xf86vidmodeproto: xf86vidmodeproto: For more information about the X.Org Foundation (the providers of the xf86vidmodeproto: X.Org implementation of the X Window System), see their website: xf86vidmodeproto: xf86vidmodeproto: http://www.x.org xf86vidmodeproto: PACKAGE NAME: xfce-4.4.1-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 19057 K PACKAGE SIZE (uncompressed): 49020 K PACKAGE DESCRIPTION: xfce: xfce (a fast and lightweight desktop environment for X) xfce: xfce: XFce is a fast and lightweight desktop environment that is both xfce: visually appealing and easy to use. xfce: xfce: For more information, see: http://www.xfce.org xfce: xfce: XFce was developed by Olivier Fourdan. xfce: PACKAGE NAME: xfd-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xfd: xfd xfd: xfd: xfd is part of X11. xfd: xfd: For more information about the X.Org Foundation (the providers of the xfd: X.Org implementation of the X Window System), see their website: xfd: xfd: http://www.x.org xfd: PACKAGE NAME: xfig-3.2.4-x86_64_slamd64-4.tgz PACKAGE LOCATION: ./slackware/t PACKAGE SIZE (compressed): 3603 K PACKAGE SIZE (uncompressed): 9890 K PACKAGE DESCRIPTION: xfig: xfig xfig: xfig: This package contains the binary for xfig, an interactive drawing tool xfig: under X. Xfig can create fig, epsf, and LaTeX files with various xfig: options. You also have to install the transfig package (transfig.tgz) xfig: so that xfig can export fig files as epsf and LaTeX files. This xfig: package also contains a set of basic examples of fig files. xfig: PACKAGE NAME: xfindproxy-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xfindproxy: xfindproxy xfindproxy: xfindproxy: xfindproxy is part of X11. xfindproxy: xfindproxy: For more information about the X.Org Foundation (the providers of the xfindproxy: X.Org implementation of the X Window System), see their website: xfindproxy: xfindproxy: http://www.x.org xfindproxy: PACKAGE NAME: xfontsel-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xfontsel: xfontsel xfontsel: xfontsel: xfontsel is part of X11. xfontsel: xfontsel: For more information about the X.Org Foundation (the providers of the xfontsel: X.Org implementation of the X Window System), see their website: xfontsel: xfontsel: http://www.x.org xfontsel: PACKAGE NAME: xfractint-20.04p04-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 989 K PACKAGE SIZE (uncompressed): 2550 K PACKAGE DESCRIPTION: xfractint: xfractint (fractal generation program) xfractint: xfractint: Xfractint draws a wide variety of fractals. Xfractint is a port of the xfractint: DOS program Fractint. xfractint: xfractint: The primary original authors of Fractint are Bert Tyler, Timothy xfractint: Wegner, Mark Peterson, and Pieter Branderhorst. Fractint was ported xfractint: to X by Ken Shirriff. xfractint: PACKAGE NAME: xfs-1.0.4-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 130 K PACKAGE DESCRIPTION: xfs: xfs xfs: xfs: xfs is part of X11. xfs: xfs: For more information about the X.Org Foundation (the providers of the xfs: X.Org implementation of the X Window System), see their website: xfs: xfs: http://www.x.org xfs: PACKAGE NAME: xfsdump-2.2.38_1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 410 K PACKAGE SIZE (uncompressed): 900 K PACKAGE DESCRIPTION: xfsdump: xfsdump (backup tools for the XFS filesystem) xfsdump: xfsdump: The xfsdump package contains the xfsdump and xfsrestore utilities for xfsdump: backing up and restoring XFS partitions. xfsdump examines files in a xfsdump: filesystem, determines which need to be backed up, and copies those xfsdump: files to a specified disk, tape or other storage medium. xfsrestore xfsdump: performs the inverse function of xfsdump; it can restore a full xfsdump: or incremental backup of a filesystem. xfsdump: PACKAGE NAME: xfsinfo-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xfsinfo: xfsinfo xfsinfo: xfsinfo: xfsinfo is part of X11. xfsinfo: xfsinfo: For more information about the X.Org Foundation (the providers of the xfsinfo: X.Org implementation of the X Window System), see their website: xfsinfo: xfsinfo: http://www.x.org xfsinfo: PACKAGE NAME: xfsprogs-2.8.16_1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 1498 K PACKAGE SIZE (uncompressed): 3770 K PACKAGE DESCRIPTION: xfsprogs: xfsprogs (tools to use the XFS filesystem) xfsprogs: xfsprogs: XFS is a high performance journaling filesystem which originated xfsprogs: on the SGI IRIX platform. It is completely multi-threaded, can xfsprogs: support large files and large filesystems, extended attributes, xfsprogs: variable block sizes, is extent based, and makes extensive use of xfsprogs: Btrees (directories, extents, free space) to aid both performance xfsprogs: and scalability. xfsprogs: PACKAGE NAME: xfwp-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xfwp: xfwp xfwp: xfwp: xfwp is part of X11. xfwp: xfwp: For more information about the X.Org Foundation (the providers of the xfwp: X.Org implementation of the X Window System), see their website: xfwp: xfwp: http://www.x.org xfwp: PACKAGE NAME: xgames-0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 121 K PACKAGE SIZE (uncompressed): 300 K PACKAGE DESCRIPTION: xgames: xgames (small X games collection) xgames: xgames: A few small and historic games and toys for X. xgames: xgames: Includes maze, spider, xcolormap, xlander, xminesweep, xroach, xsnow. xgames: PACKAGE NAME: xgamma-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xgamma: xgamma xgamma: xgamma: xgamma is part of X11. xgamma: xgamma: For more information about the X.Org Foundation (the providers of the xgamma: X.Org implementation of the X Window System), see their website: xgamma: xgamma: http://www.x.org xgamma: PACKAGE NAME: xgc-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 80 K PACKAGE DESCRIPTION: xgc: xgc xgc: xgc: xgc is part of X11. xgc: xgc: For more information about the X.Org Foundation (the providers of the xgc: X.Org implementation of the X Window System), see their website: xgc: xgc: http://www.x.org xgc: PACKAGE NAME: xhost-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xhost: xhost xhost: xhost: xhost is part of X11. xhost: xhost: For more information about the X.Org Foundation (the providers of the xhost: X.Org implementation of the X Window System), see their website: xhost: xhost: http://www.x.org xhost: PACKAGE NAME: xine-lib-1.1.7-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 4240 K PACKAGE SIZE (uncompressed): 9020 K PACKAGE DESCRIPTION: xine-lib: xine-lib (xine multimedia playback engine libraries) xine-lib: xine-lib: xine-lib is a free (GPL licensed) high-performance multimedia xine-lib: playback engine. The xine shared libraries are used by xine-ui (and xine-lib: other media players and multimedia applications) for smooth video xine-lib: processing and playback of multimedia streams such as movies, radio xine-lib: and TV network streams, DVDs, and VCDs. xine-lib: PACKAGE NAME: xine-ui-0.99.5-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1569 K PACKAGE SIZE (uncompressed): 3010 K PACKAGE DESCRIPTION: xine-ui: xine-ui (xine multimedia playback engine user interface) xine-ui: xine-ui: Xine is a free multimedia player. It plays back CDs, DVDs, and VCDs, xine-ui: multimedia files, and multimedia streamed over a network. xine-ui: xine-ui: The xine-ui package contains the graphical user interface for the xine-ui: xine multimedia player. xine-ui: PACKAGE NAME: xineramaproto-1.1.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xineramaproto: xineramaproto xineramaproto: xineramaproto: xineramaproto is part of X11. xineramaproto: xineramaproto: For more information about the X.Org Foundation (the providers of the xineramaproto: X.Org implementation of the X Window System), see their website: xineramaproto: xineramaproto: http://www.x.org xineramaproto: PACKAGE NAME: xinit-1.0.4-x86_64_slamd64-3.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xinit: xinit xinit: xinit: xinit is part of X11. xinit: xinit: For more information about the X.Org Foundation (the providers of the xinit: X.Org implementation of the X Window System), see their website: xinit: xinit: http://www.x.org xinit: PACKAGE NAME: xkbcomp-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 88 K PACKAGE SIZE (uncompressed): 200 K PACKAGE DESCRIPTION: xkbcomp: xkbcomp xkbcomp: xkbcomp: xkbcomp is part of X11. xkbcomp: xkbcomp: For more information about the X.Org Foundation (the providers of the xkbcomp: X.Org implementation of the X Window System), see their website: xkbcomp: xkbcomp: http://www.x.org xkbcomp: PACKAGE NAME: xkbevd-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xkbevd: xkbevd xkbevd: xkbevd: xkbevd is part of X11. xkbevd: xkbevd: For more information about the X.Org Foundation (the providers of the xkbevd: X.Org implementation of the X Window System), see their website: xkbevd: xkbevd: http://www.x.org xkbevd: PACKAGE NAME: xkbprint-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 50 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: xkbprint: xkbprint xkbprint: xkbprint: xkbprint is part of X11. xkbprint: xkbprint: For more information about the X.Org Foundation (the providers of the xkbprint: X.Org implementation of the X Window System), see their website: xkbprint: xkbprint: http://www.x.org xkbprint: PACKAGE NAME: xkbutils-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xkbutils: xkbutils xkbutils: xkbutils: xkbutils is part of X11. xkbutils: xkbutils: For more information about the X.Org Foundation (the providers of the xkbutils: X.Org implementation of the X Window System), see their website: xkbutils: xkbutils: http://www.x.org xkbutils: PACKAGE NAME: xkeyboard-config-0.9-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 326 K PACKAGE SIZE (uncompressed): 2610 K PACKAGE DESCRIPTION: xkeyboard-config: xkeyboard-config xkeyboard-config: xkeyboard-config: xkeyboard-config is part of X11. xkeyboard-config: xkeyboard-config: For more information about the X.Org Foundation (the providers of the xkeyboard-config: X.Org implementation of the X Window System), see their website: xkeyboard-config: xkeyboard-config: http://www.x.org xkeyboard-config: PACKAGE NAME: xkill-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xkill: xkill xkill: xkill: xkill is part of X11. xkill: xkill: For more information about the X.Org Foundation (the providers of the xkill: X.Org implementation of the X Window System), see their website: xkill: xkill: http://www.x.org xkill: PACKAGE NAME: xlibs32-7.1-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/c PACKAGE SIZE (compressed): 2022 K PACKAGE SIZE (uncompressed): 4980 K PACKAGE DESCRIPTION: xlibs32: xlibs32 xlibs32: This package provides the libraries required for 32-bit X xlibs32: applications to run. xlibs32: xlibs32: It replaces the old 32x11 package. xlibs32: PACKAGE NAME: xload-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xload: xload xload: xload: xload is part of X11. xload: xload: For more information about the X.Org Foundation (the providers of the xload: X.Org implementation of the X Window System), see their website: xload: xload: http://www.x.org xload: PACKAGE NAME: xlockmore-5.23-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 1130 K PACKAGE SIZE (uncompressed): 3050 K PACKAGE DESCRIPTION: xlockmore: xlockmore (screen locker for X) xlockmore: xlockmore: Patrick J. Naughton's xlock screensaver/locker for X, with many xlockmore: more modes added by David A. Bagley. xlockmore: xlockmore: The 'Bob' bitmap has been included especially for Slackware, as well xlockmore: as a Linux penguin logo. (NOTE: the image of J. R. "Bob" Dobbs is a xlockmore: registered trademark of The Subgenius Foundation, used by permission) xlockmore: PACKAGE NAME: xlogo-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xlogo: xlogo xlogo: xlogo: xlogo is part of X11. xlogo: xlogo: For more information about the X.Org Foundation (the providers of the xlogo: X.Org implementation of the X Window System), see their website: xlogo: xlogo: http://www.x.org xlogo: PACKAGE NAME: xlsatoms-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xlsatoms: xlsatoms xlsatoms: xlsatoms: xlsatoms is part of X11. xlsatoms: xlsatoms: For more information about the X.Org Foundation (the providers of the xlsatoms: X.Org implementation of the X Window System), see their website: xlsatoms: xlsatoms: http://www.x.org xlsatoms: PACKAGE NAME: xlsclients-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xlsclients: xlsclients xlsclients: xlsclients: xlsclients is part of X11. xlsclients: xlsclients: For more information about the X.Org Foundation (the providers of the xlsclients: X.Org implementation of the X Window System), see their website: xlsclients: xlsclients: http://www.x.org xlsclients: PACKAGE NAME: xlsfonts-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xlsfonts: xlsfonts xlsfonts: xlsfonts: xlsfonts is part of X11. xlsfonts: xlsfonts: For more information about the X.Org Foundation (the providers of the xlsfonts: X.Org implementation of the X Window System), see their website: xlsfonts: xlsfonts: http://www.x.org xlsfonts: PACKAGE NAME: xmag-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xmag: xmag xmag: xmag: xmag is part of X11. xmag: xmag: For more information about the X.Org Foundation (the providers of the xmag: X.Org implementation of the X Window System), see their website: xmag: xmag: http://www.x.org xmag: PACKAGE NAME: xman-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 100 K PACKAGE DESCRIPTION: xman: xman xman: xman: xman is part of X11. xman: xman: For more information about the X.Org Foundation (the providers of the xman: X.Org implementation of the X Window System), see their website: xman: xman: http://www.x.org xman: PACKAGE NAME: xmessage-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xmessage: xmessage xmessage: xmessage: xmessage is part of X11. xmessage: xmessage: For more information about the X.Org Foundation (the providers of the xmessage: X.Org implementation of the X Window System), see their website: xmessage: xmessage: http://www.x.org xmessage: PACKAGE NAME: xmh-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 77 K PACKAGE SIZE (uncompressed): 160 K PACKAGE DESCRIPTION: xmh: xmh xmh: xmh: xmh is part of X11. xmh: xmh: For more information about the X.Org Foundation (the providers of the xmh: X.Org implementation of the X Window System), see their website: xmh: xmh: http://www.x.org xmh: PACKAGE NAME: xmodmap-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xmodmap: xmodmap xmodmap: xmodmap: xmodmap is part of X11. xmodmap: xmodmap: For more information about the X.Org Foundation (the providers of the xmodmap: X.Org implementation of the X Window System), see their website: xmodmap: xmodmap: http://www.x.org xmodmap: PACKAGE NAME: xmore-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xmore: xmore xmore: xmore: xmore is part of X11. xmore: xmore: For more information about the X.Org Foundation (the providers of the xmore: X.Org implementation of the X Window System), see their website: xmore: xmore: http://www.x.org xmore: PACKAGE NAME: xorg-cf-files-1.0.2-noarch_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 221 K PACKAGE SIZE (uncompressed): 1230 K PACKAGE DESCRIPTION: xorg-cf-files: xorg-cf-files xorg-cf-files: xorg-cf-files: xorg-cf-files is part of X11. xorg-cf-files: xorg-cf-files: For more information about the X.Org Foundation (the providers of the xorg-cf-files: X.Org implementation of the X Window System), see their website: xorg-cf-files: xorg-cf-files: http://www.x.org xorg-cf-files: PACKAGE NAME: xorg-docs-1.4-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5750 K PACKAGE SIZE (uncompressed): 7280 K PACKAGE DESCRIPTION: xorg-docs: xorg-docs xorg-docs: xorg-docs: xorg-docs is part of X11. xorg-docs: xorg-docs: For more information about the X.Org Foundation (the providers of the xorg-docs: X.Org implementation of the X Window System), see their website: xorg-docs: xorg-docs: http://www.x.org xorg-docs: PACKAGE NAME: xorg-server-1.3.0.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3734 K PACKAGE SIZE (uncompressed): 11520 K PACKAGE DESCRIPTION: xorg-server: xorg-server (The Xorg server, the core of the X Window System) xorg-server: xorg-server: Xorg is a full featured X server that was originally designed for UNIX xorg-server: and UNIX-like operating systems running on Intel x86 hardware. It now xorg-server: runs on a wider range of hardware and OS platforms. This work was xorg-server: derived by the X.Org Foundation from the XFree86 Project's XFree86 xorg-server: 4.4rc2 release. The XFree86 release was originally derived from X386 xorg-server: 1.2 by Thomas Roell which was contributed to X11R5 by Snitily Graphics xorg-server: Consulting Service. xorg-server: xorg-server: The home page for the X project is: http://www.x.org PACKAGE NAME: xorg-server-xdmx-1.3.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 866 K PACKAGE SIZE (uncompressed): 1930 K PACKAGE DESCRIPTION: xorg-server-xdmx: xorg-server-xdmx (Distributed Multi-head X server) xorg-server-xdmx: xorg-server-xdmx: Xdmx is a proxy X server that uses one or more other X servers as its xorg-server-xdmx: display devices. It provides multi-head X functionality for displays xorg-server-xdmx: that might be located on different machines. xorg-server-xdmx: PACKAGE NAME: xorg-server-xnest-1.3.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1426 K PACKAGE SIZE (uncompressed): 3630 K PACKAGE DESCRIPTION: xorg-server-xnest: xorg-server-xnest (a nested X server) xorg-server-xnest: xorg-server-xnest: Xnest is an experimental nested server for X that acts as both a xorg-server-xnest: client and a server. Xnest is a client of the real server which xorg-server-xnest: manages windows and graphics requests on its behalf. Xnest is a xorg-server-xnest: server to its own clients. Xnest manages windows and graphics xorg-server-xnest: requests on their behalf. To these clients Xnest appears to be a xorg-server-xnest: conventional server. xorg-server-xnest: PACKAGE NAME: xorg-server-xvfb-1.3.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1568 K PACKAGE SIZE (uncompressed): 3920 K PACKAGE DESCRIPTION: xorg-server-xvfb: xorg-server-xvfb (virtual framebuffer X server) xorg-server-xvfb: xorg-server-xvfb: Xvfb is an X server that can run on machines with no display hardware xorg-server-xvfb: and no physical input devices. It emulates a dumb framebuffer using xorg-server-xvfb: virtual memory. The primary use of this server is intended to be xorg-server-xvfb: server testing. The mfb or cfb code for any depth can be exercised xorg-server-xvfb: with this server without the need for real hardware that supports the xorg-server-xvfb: desired depths. A secondary use is testing clients against unusual xorg-server-xvfb: depths and screen configurations. xorg-server-xvfb: PACKAGE NAME: xorg-sgml-doctools-1.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 10 K PACKAGE DESCRIPTION: xorg-sgml-doctools: xorg-sgml-doctools xorg-sgml-doctools: xorg-sgml-doctools: xorg-sgml-doctools is part of X11. xorg-sgml-doctools: xorg-sgml-doctools: For more information about the X.Org Foundation (the providers of the xorg-sgml-doctools: X.Org implementation of the X Window System), see their website: xorg-sgml-doctools: xorg-sgml-doctools: http://www.x.org xorg-sgml-doctools: PACKAGE NAME: xpaint-2.7.8.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 383 K PACKAGE SIZE (uncompressed): 1200 K PACKAGE DESCRIPTION: xpaint: xpaint (simple X paint program) xpaint: xpaint: XPaint is a versatile bitmap/pixmap editing tool with a feature set xpaint: similar to MacPaint. xpaint: xpaint: The short features list: xpaint: Brushes, Spray paint, Pencil, Lines, Arcs, Pattern Fill, Text, xpaint: Boxes, Circles, Polygons. xpaint: Works on multiple images simultaneously. Cut/Copy/Paste between all xpaint: active images. Fatbits/Zoom on the image windows. xpaint: PACKAGE NAME: xpdf-3.02pl1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 565 K PACKAGE SIZE (uncompressed): 1480 K PACKAGE DESCRIPTION: xpdf: xpdf (PDF viewer for X) xpdf: xpdf: Xpdf is a viewer for Portable Document Format (PDF) files. xpdf: xpdf: xpdf was written by Derek B. Noonburg. xpdf: xpdf: The xpdf package requires the t1lib package to render Type 1 fonts. xpdf: PACKAGE NAME: xphelloworld-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 60 K PACKAGE DESCRIPTION: xphelloworld: xphelloworld xphelloworld: xphelloworld: xphelloworld is part of X11. xphelloworld: xphelloworld: For more information about the X.Org Foundation (the providers of the xphelloworld: X.Org implementation of the X Window System), see their website: xphelloworld: xphelloworld: http://www.x.org xphelloworld: PACKAGE NAME: xplsprinters-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xplsprinters: xplsprinters xplsprinters: xplsprinters: xplsprinters is part of X11. xplsprinters: xplsprinters: For more information about the X.Org Foundation (the providers of the xplsprinters: X.Org implementation of the X Window System), see their website: xplsprinters: xplsprinters: http://www.x.org xplsprinters: PACKAGE NAME: xpr-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 70 K PACKAGE DESCRIPTION: xpr: xpr xpr: xpr: xpr is part of X11. xpr: xpr: For more information about the X.Org Foundation (the providers of the xpr: X.Org implementation of the X Window System), see their website: xpr: xpr: http://www.x.org xpr: PACKAGE NAME: xprehashprinterlist-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xprehashprinterlist: xprehashprinterlist xprehashprinterlist: xprehashprinterlist: xprehashprinterlist is part of X11. xprehashprinterlist: xprehashprinterlist: For more information about the X.Org Foundation (the providers of the xprehashprinterlist: X.Org implementation of the X Window System), see their website: xprehashprinterlist: xprehashprinterlist: http://www.x.org xprehashprinterlist: PACKAGE NAME: xprop-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xprop: xprop xprop: xprop: xprop is part of X11. xprop: xprop: For more information about the X.Org Foundation (the providers of the xprop: X.Org implementation of the X Window System), see their website: xprop: xprop: http://www.x.org xprop: PACKAGE NAME: xproto-7.0.10-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 400 K PACKAGE DESCRIPTION: xproto: xproto xproto: xproto: xproto is part of X11. xproto: xproto: For more information about the X.Org Foundation (the providers of the xproto: X.Org implementation of the X Window System), see their website: xproto: xproto: http://www.x.org xproto: PACKAGE NAME: xproxymanagementprotocol-1.0.2-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 2 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xproxymanagementprotocol: xproxymanagementprotocol xproxymanagementprotocol: xproxymanagementprotocol: xproxymanagementprotocol is part of X11. xproxymanagementprotocol: xproxymanagementprotocol: For more information about the X.Org Foundation (the providers of the xproxymanagementprotocol: X.Org implementation of the X Window System), see their website: xproxymanagementprotocol: xproxymanagementprotocol: http://www.x.org xproxymanagementprotocol: PACKAGE NAME: xrandr-1.2.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xrandr: xrandr xrandr: xrandr: xrandr is part of X11. xrandr: xrandr: For more information about the X.Org Foundation (the providers of the xrandr: X.Org implementation of the X Window System), see their website: xrandr: xrandr: http://www.x.org xrandr: PACKAGE NAME: xrdb-1.0.3-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xrdb: xrdb xrdb: xrdb: xrdb is part of X11. xrdb: xrdb: For more information about the X.Org Foundation (the providers of the xrdb: X.Org implementation of the X Window System), see their website: xrdb: xrdb: http://www.x.org xrdb: PACKAGE NAME: xrefresh-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xrefresh: xrefresh xrefresh: xrefresh: xrefresh is part of X11. xrefresh: xrefresh: For more information about the X.Org Foundation (the providers of the xrefresh: X.Org implementation of the X Window System), see their website: xrefresh: xrefresh: http://www.x.org xrefresh: PACKAGE NAME: xrx-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 110 K PACKAGE DESCRIPTION: xrx: xrx xrx: xrx: xrx is part of X11. xrx: xrx: For more information about the X.Org Foundation (the providers of the xrx: X.Org implementation of the X Window System), see their website: xrx: xrx: http://www.x.org xrx: PACKAGE NAME: xsane-0.994-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 2075 K PACKAGE SIZE (uncompressed): 5270 K PACKAGE DESCRIPTION: xsane: xsane (Graphical frontend to SANE, Scanner Access Now Easy) xsane: xsane: xsane provides a graphical user-interface to control an image xsane: acquisition device such as a flatbed scanner. It allows previewing xsane: and scanning individual images and can be invoked either directly xsane: from the command-line or through the GIMP image manipulation program. xsane: xsane: xsane accesses image acquisition devices through the SANE (Scanner xsane: Access Now Easy) interface. xsane: PACKAGE NAME: xscreensaver-5.02-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 8045 K PACKAGE SIZE (uncompressed): 18590 K PACKAGE DESCRIPTION: xscreensaver: xscreensaver (a screen saver and locker for X) xscreensaver: xscreensaver: A modular screen saver and locker for the X Window System. Highly xscreensaver: customizable: allows the use of any program that can draw on the xscreensaver: root window as a display mode. More than 100 display modes are xscreensaver: included in this package. xscreensaver: PACKAGE NAME: xset-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xset: xset xset: xset: xset is part of X11. xset: xset: For more information about the X.Org Foundation (the providers of the xset: X.Org implementation of the X Window System), see their website: xset: xset: http://www.x.org xset: PACKAGE NAME: xsetmode-1.0.0-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xsetmode: xsetmode xsetmode: xsetmode: xsetmode is part of X11. xsetmode: xsetmode: For more information about the X.Org Foundation (the providers of the xsetmode: X.Org implementation of the X Window System), see their website: xsetmode: xsetmode: http://www.x.org xsetmode: PACKAGE NAME: xsetpointer-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xsetpointer: xsetpointer xsetpointer: xsetpointer: xsetpointer is part of X11. xsetpointer: xsetpointer: For more information about the X.Org Foundation (the providers of the xsetpointer: X.Org implementation of the X Window System), see their website: xsetpointer: xsetpointer: http://www.x.org xsetpointer: PACKAGE NAME: xsetroot-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 30 K PACKAGE DESCRIPTION: xsetroot: xsetroot xsetroot: xsetroot: xsetroot is part of X11. xsetroot: xsetroot: For more information about the X.Org Foundation (the providers of the xsetroot: X.Org implementation of the X Window System), see their website: xsetroot: xsetroot: http://www.x.org xsetroot: PACKAGE NAME: xsm-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 48 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: xsm: xsm xsm: xsm: xsm is part of X11. xsm: xsm: For more information about the X.Org Foundation (the providers of the xsm: X.Org implementation of the X Window System), see their website: xsm: xsm: http://www.x.org xsm: PACKAGE NAME: xstdcmap-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xstdcmap: xstdcmap xstdcmap: xstdcmap: xstdcmap is part of X11. xstdcmap: xstdcmap: For more information about the X.Org Foundation (the providers of the xstdcmap: X.Org implementation of the X Window System), see their website: xstdcmap: xstdcmap: http://www.x.org xstdcmap: PACKAGE NAME: xterm-224-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 221 K PACKAGE SIZE (uncompressed): 480 K PACKAGE DESCRIPTION: xterm: xterm (terminal emulator for X) xterm: xterm: The xterm program is a terminal emulator for the X Window System. xterm: It provides DEC VT102/VT220 (VTxxx) and Tektronix 4014 compatible xterm: terminals for programs that cannot use the window system directly. xterm: PACKAGE NAME: xtrans-1.0.3-noarch_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 300 K PACKAGE DESCRIPTION: xtrans: xtrans xtrans: xtrans: xtrans is part of X11. xtrans: xtrans: For more information about the X.Org Foundation (the providers of the xtrans: X.Org implementation of the X Window System), see their website: xtrans: xtrans: http://www.x.org xtrans: PACKAGE NAME: xtrap-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 90 K PACKAGE DESCRIPTION: xtrap: xtrap xtrap: xtrap: xtrap is part of X11. xtrap: xtrap: For more information about the X.Org Foundation (the providers of the xtrap: X.Org implementation of the X Window System), see their website: xtrap: xtrap: http://www.x.org xtrap: PACKAGE NAME: xv-3.10a-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/xap PACKAGE SIZE (compressed): 985 K PACKAGE SIZE (uncompressed): 1600 K PACKAGE DESCRIPTION: xv: xv (John Bradley's interactive image viewer) xv: xv: xv is an interactive image manipulation program. xv: xv: NOTICE: This program is unregistered shareware. Please read the xv: license information included. xv: PACKAGE NAME: xvidtune-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xvidtune: xvidtune xvidtune: xvidtune: xvidtune is part of X11. xvidtune: xvidtune: For more information about the X.Org Foundation (the providers of the xvidtune: X.Org implementation of the X Window System), see their website: xvidtune: xvidtune: http://www.x.org xvidtune: PACKAGE NAME: xvinfo-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 20 K PACKAGE DESCRIPTION: xvinfo: xvinfo xvinfo: xvinfo: xvinfo is part of X11. xvinfo: xvinfo: For more information about the X.Org Foundation (the providers of the xvinfo: X.Org implementation of the X Window System), see their website: xvinfo: xvinfo: http://www.x.org xvinfo: PACKAGE NAME: xwd-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xwd: xwd xwd: xwd: xwd is part of X11. xwd: xwd: For more information about the X.Org Foundation (the providers of the xwd: X.Org implementation of the X Window System), see their website: xwd: xwd: http://www.x.org xwd: PACKAGE NAME: xwininfo-1.0.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 50 K PACKAGE DESCRIPTION: xwininfo: xwininfo xwininfo: xwininfo: xwininfo is part of X11. xwininfo: xwininfo: For more information about the X.Org Foundation (the providers of the xwininfo: X.Org implementation of the X Window System), see their website: xwininfo: xwininfo: http://www.x.org xwininfo: PACKAGE NAME: xwud-1.0.1-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 40 K PACKAGE DESCRIPTION: xwud: xwud xwud: xwud: xwud is part of X11. xwud: xwud: For more information about the X.Org Foundation (the providers of the xwud: X.Org implementation of the X Window System), see their website: xwud: xwud: http://www.x.org xwud: PACKAGE NAME: yptools-2.9-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 229 K PACKAGE SIZE (uncompressed): 690 K PACKAGE DESCRIPTION: yptools: yptools (NIS servers and clients) yptools: yptools: NIS stands for Network Information Service. NIS is usually used to yptools: provide /etc/passwd and /etc/group information throughout the network. yptools: Most Sun-based networks run NIS, and Linux machines can take full yptools: advantage of existing NIS service or provide NIS service themselves. yptools: PACKAGE NAME: ytalk-3.3.0-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/n PACKAGE SIZE (compressed): 54 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: ytalk: ytalk (multi-user chat program) ytalk: ytalk: YTalk is a multi-user chat program. It works almost exactly like the ytalk: UNIX talk program and even communicates with the same talk daemon, but ytalk: YTalk allows for multiple connections. ytalk: PACKAGE NAME: zlib-1.2.3-x86_64_slamd64-2.tgz PACKAGE LOCATION: ./slackware/l PACKAGE SIZE (compressed): 130 K PACKAGE SIZE (uncompressed): 400 K PACKAGE DESCRIPTION: zlib: zlib (compression library) zlib: zlib: zlib is a general purpose thread safe data compression library. The zlib: data format used by the zlib library is described by RFCs 1950 to zlib: 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt (zlib format) zlib: rfc1951.txt (deflate format) and rfc1952.txt (gzip format). zlib: PACKAGE NAME: zoo-2.10-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/a PACKAGE SIZE (compressed): 60 K PACKAGE SIZE (uncompressed): 120 K PACKAGE DESCRIPTION: zoo: zoo (archiving and compressing utility) zoo: zoo: Zoo is used to create and maintain collections of files in compressed zoo: form. It uses a Lempel-Ziv compression algorithm that gives space zoo: savings in the range of 20% to 80% depending on the type of file data. zoo: Zoo can store and selectively extract multiple generations of the same zoo: file. Data can be recovered from damaged archives by skipping the zoo: damaged portion and locating undamaged data with the help of fiz(1). zoo: zoo: Zoo was written by Rahul Dhesi. zoo: PACKAGE NAME: zsh-4.3.2-x86_64_slamd64-1.tgz PACKAGE LOCATION: ./slackware/ap PACKAGE SIZE (compressed): 2101 K PACKAGE SIZE (uncompressed): 7090 K PACKAGE DESCRIPTION: zsh: zsh (the Z shell) zsh: zsh: Zsh is a UNIX command interpreter (shell) which of the standard shells zsh: most resembles the Korn shell (ksh), although it is not completely zsh: compatible. It includes enhancements of many types, notably in the zsh: command-line editor, options for customizing its behavior, filename zsh: globbing, features to make C-shell (csh) users feel more at home and zsh: extra features drawn from tcsh (another 'custom' shell). Zsh was zsh: written by Paul Falstad. zsh: