# postGGIR

#### Wei Guo

#### January 06, 2022

# Introduction

## What is GGIR?

GGIR is an R-package to process multi-day raw accelerometer data for physical activity and sleep research. GGIR will write all output files into two sub-directories of ./meta and ./results. GGIR is increasingly being used by a number of academic institutes across the world.

## What is postGGIR?

postGGIR is an R-package to data processing after running GGIR for accelerometer data. In detail, all necessary R/Rmd/shell files were generated for data processing after running GGIR for accelerometer data. Then in part 1, all csv files in the GGIR output directory were read, transformed and then merged. In part 2, the GGIR output files were checked and summarized in one excel sheet. In part 3, the merged data was cleaned according to the number of valid hours on each night and the number of valid days for each subject. In part 4, the cleaned activity data was imputed by the average ENMO over all the valid days for each subject. Finally, a comprehensive report of data processing was created using Rmarkdown, and the report includes few explortatory plots and multiple commonly used features extracted from minute level actigraphy data in part 5-7. This vignette provides a general introduction to postGGIR.

## Software Architecture

The R package postGGIR has been released with an open-source GPL-3 license on CRAN, and postGGIR can run on Windows and Linux. Parallel computing in Linux is recommended due to the memory requirements associated with reading in multiple of the large data files. The package contains one primary function for users which, when run, generates all necessary R/R Markdown/shell executable files for data processing after running GGIR for accelerometer data; load, read, transform and merge long activity data; examine and summarize GGIR outputs; clean the merged activity data according to the number of valid hours per night and the number of valid days per subject; activity data imputation by taking the average across the valid days for each subject; build a comprehensive report of data processing and exploratory plots; extract multiple commonly used features and study feature structure by the covariance decomposition. Figure 1 presents a flowchart for each step in this process which is described in greater detail below. The procedure, R functions, inputs, and outputs are all described in this package vignette. In addition, more documentation and example data could be found in postGGIR repository on GitHub (URL: https://github.com/dora201888/postGGIR).

#

Mirroring the GGIR structure of processing individual data files in multiple parts, the postGGIR package is split into seven parts, grouping functionalities in logical processing order. The parts are numbered from 1 to 7. Parts 1 to 4 are dedicated to data processing. Parts 5 to 7 are dedicated to producing R Markdown reports of data cleaning, feature extraction, and unsupervised covariance decomposition via the joint and individual variance explained (JIVE) method, respectively. These seven parts are carried out sequentially with milestone data automatically being saved locally. To use postGGIR, the first step for users is to install and load the postGGIR package. Then, users run the create.postGGIR() function which creates a single R script. The newly created R script, Studyname_part0.maincall.R, is then edited by users, allowing for the specification of arguments relevant for each of the seven parts. All optional arguments and their defaults are described in the package vignette. In addition, for users with access to a cluster for parallel processing, a shell function, named as part9_swarm.sh is created which can parallelizes the processing of individual files with minor modifications by the user. These modifications are described in the package vignette. Computationally, part 1 is the most time-consuming task, taking up at least 60% of the processing time, which the activity data in .csv format was transformed and merged. Generally, part 1 takes about 10~30 minutes to process a file with 14 days of data recorded at 30 Hz on a GeneActiv device in processor cores of 36 x 2.3 GHz (Intel Gold 6140). All output created for each part is described in the package vignette. Briefly, part 1 and part 2 output are saved using a directory structure with a depth of two, containing output data and summary for all participants. The reports for parts 5 to 7 are saved in .html format and are generated using R Markdown (.Rmd) files. These .Rmd files are included in the output, users the flexibility to adapt the source code to their research purpose.

#

Figure 1: Overview of main steps and output in postGGIR workflow.

## Software Dependencies

All postGGIR code is written in R and reports generated in R Markdown. The R packages ActFrag and ActCR are used for the calculation of certain physical activity and circadian rhythmicity features. The R package r.jive is used to perform the feature interaction analysis and to study the joint and individual variation structure by JIVE.

# Setting up your work environment

## Install R and RStudio

Download and install R

Download and install RStudio (optional, but recommended)

Download GGIR with its dependencies, you can do this with one command from the console command line:

    install.packages("postGGIR", dependencies = TRUE)

## Prepare folder structure

1. folder of .bin files for GGIR or a file listing all .bin files
   - R program will check the missing in the GGIR output by comparing with all raw .bin files
2. foder of the GGIR output with two sub-folders
   - meta (./basic, ./csv, etc)
   - results (partsummary.csv)

# Quick start

## Create a template shell script of postGGIR

    library(postGGIR)
    create.postGGIR()

The function will create a template shell script of postGGIR in the current directory, names as STUDYNAME_part0.maincall.R.

    cat STUDYNAME_part0.maincall.R

    options(width=2000)
    argv = commandArgs(TRUE);
    print(argv)
    print(paste("length=",length(argv),sep=""))
    mode<-as.numeric(argv[1])
    print(c("mode =", mode))
    # (Note) Please remove the above lines if you are running this within R console
    #        instead of submitting jobs to a cluster.

    #########################################################################
    # (user-define 1) you need to redefine this according different study!!!!
    #########################################################################
    # example 1
    filename2id.1<-function(x)  unlist(strsplit(y1,"\\."))[1]

    #  example 2 (use csv file =c("filename","ggirID"))
    filename2id.2<-function(x) {
      d<-read.csv("./postGGIR/inst/example/filename2id.csv",head=1,stringsAsFactors=F)
      y1<-which(d[,"filename"]==x)
      if (length(y1)==0) stop(paste("Missing ",x," in filename2id.csv file",sep=""))
      if (length(y1)>=1) y2<-d[y1[1],"newID"]
      return(as.character(y2))
    }

    #########################################################################
    #  main call
    #########################################################################

    call.afterggir<-function(mode,filename2id=filename2id.1){

    library(postGGIR)
    #########################################################################
    # (user-define 2) Fill in parameters of your ggir output
    ##########################################################################

    currentdir =
    studyname =
    bindir =
    outputdir =
    setwd(currentdir)

    rmDup=FALSE   # keep all subjects in postGGIR
    PA.threshold=c(50,100,400)
    part5FN="WW_L50M125V500_T5A5"
    epochIn = 5
    epochOut = 5
    flag.epochOut = 60
    use.cluster = FALSE
    log.multiplier = 9250
    QCdays.alpha = 7
    QChours.alpha = 16
    useIDs.FN<-NULL
    Rversion="R"
    desiredtz="US/Eastern"
    RemoveDaySleeper=FALSE
    part5FN=part5FN,
    NfileEachBundle=20
    trace=FALSE
    #########################################################################
    #   remove duplicate sample IDs for plotting and feature extraction
    #########################################################################
    if (mode==3 & rmDup){
    # step 1: read ./summary/*remove_temp.csv file (output of mode=2)
    keep.last<-TRUE #keep the latest visit for each sample
    sumdir<-paste(currentdir,"/summary",sep="")
    setwd(sumdir)
    inFN<-paste(studyname,"_samples_remove_temp.csv",sep="")
    useIDs.FN<-paste(sumdir,"/",studyname,"_samples_remove.csv",sep="")

    #########################################################################
    # (user-define 3 as rmDup=TRUE)  create useIDs.FN file
    #########################################################################
    # step 2: create the ./summary/*remove.csv file manually or by R commands
    d<-read.csv(inFN,head=1,stringsAsFactors=F)
    d<-d[order(d[,"Date"]),]
    d<-d[order(d[,"newID"]),]
    d[which(is.na(d[,"newID"])),]
    S<-duplicated(d[,"newID"],fromLast=keep.last) #keep the last copy for nccr
    d[S,"duplicate"]<-"remove"
    write.csv(d,file=useIDs.FN,row.names=F)

    }

    #########################################################################
    #   call afterggir
    #########################################################################

    setwd(currentdir)
    afterggir(mode=mode,
              useIDs.FN=useIDs.FN,
              currentdir=currentdir,
              studyname=studyname,
              bindir=bindir,
              outputdir=outputdir,
              epochIn=epochIn,
              epochOut=epochOut,
              flag.epochOut=flag.epochOut,
              log.multiplier=log.multiplier,
              use.cluster=use.cluster,
              QCdays.alpha=QCdays.alpha,
              QChours.alpha=QChours.alpha,
              QCnights.feature.alpha=QCnights.feature.alpha,
              Rversion=Rversion,
              filename2id=filename2id,
              PA.threshold=PA.threshold,
              desiredtz=desiredtz,
              RemoveDaySleeper=RemoveDaySleeper,
              part5FN=part5FN,
              NfileEachBundle=NfileEachBundle,
              trace=trace)

    }
    #########################################################################
              call.afterggir(mode)
    #########################################################################

    #   Note:   call.afterggir(mode)
    #        mode = 0 : creat sw/Rmd file
    #        mode = 1 : data transform using cluster or not
    #        mode = 2 : summary
    #        mode = 3 : clean
    #        mode = 4 : impu

## Edit shell script

Three places were marked as “user-define” and need to be edited by user in the STUDYNAME_part0.maincall.R file. Please rename the file by replacing your real studyname after the edition.

### 1. Define the function filename2id( )

This user-defined function will change the filename of the raw accelerometer file to the short ID. For example, the first example change “0002__026907_2016-03-11 13-05-59.bin” to new ID of “0002”. If you prefer to define new ID by other way, you could create a .CSV file including “filename” and “newID” at least and then defined this function as the second example. The new variable of “newID”, included in the output files, could be used as the key ID in the summary report of postGGIR and be used to define the duplicate samples as well.

### 2. Parameters of shell script

User needs to define the following parameters as follows,

Variables | Description
--- | ---
rmDup | Set rmDup = TRUE if user want to remove some samples such as duplicates. Set rmDup = FALSE if user want to keep all samples.
mode | Specify which of the five parts need to be run, e.g. mode = 0 makes that all R/Rmd/sh files are generated for other parts. When mode = 1, all csv files in the GGIR output directory were read, transformed and then merged. When mode = 2, the GGIR output files were checked and summarized in one excel sheet. When mode = 3, the merged data was cleaned according to the number of valid hours on each night and the number of valid days for each subject. When mode = 4, the cleaned data was imputed.
useIDs.FN | Filename with or without directory for sample information in CSV format, which including “filename” and “duplicate” in the headlines at least. If duplicate=“remove”, the accelerometer files will not be used in the data analysis of part 5-7. Defaut is NULL, which makes all accelerometer files will be used in part 5-7.
currentdir | Directory where the output needs to be stored. Note that this directory must exist.
studyname | Specify the study name that used in the output file names
bindir | Directory where the accelerometer files are stored or list
outputdir | Directory where the GGIR output was stored.
epochIn | Epoch size to which acceleration was averaged (seconds) in GGIR output. Defaut is 5 seconds.
epochOut | Epoch size to which acceleration was averaged (seconds) in part1. Defaut is 5 seconds.
flag.epochOut | Epoch size to which acceleration was averaged (seconds) in part 3. Defaut is 60 seconds.
log.multiplier | The coefficient used in the log transformation of the ENMO data, i.e. log( log.multiplier * ENMO + 1), which have been used in part 5-7. Defaut is 9250.
use.cluster | Specify if part1 will be done by parallel computing. Default is TRUE, and the CSV file in GGIR output will be merged for every 20 files first, and then combined for all.
QCdays.alpha | Minimum required number of valid days in subject specific analysis as a quality control step in part2. Default is 7 days.
QChours.alpha | Minimum required number of valid hours in day specific analysis as a quality control step in part2. Default is 16 hours.
QCnights.feature.alpha | Minimum required number of valid nights in day specific mean and SD analysis as a quality control step in the JIVE analysis. Default is c(0,0), i.e. no additional data cleaning in this step.
Rversion | R version, eg. “R/3.6.3”. Default is “R”.
filename2id | User defined function for converting filename to sample IDs. Default is NULL.
PA.threshold | Threshold for light, moderate and vigorous physical activity. Default is c(50,100,400).
desiredtz | desired timezone: see also https://en.wikipedia.org/wiki/Zone.tab. Used in g.inspectfile(). Default is “US/Eastern”.
RemoveDaySleeper | Specify if the daysleeper nights are removed from the calculation of number of valid days for each subject. Default is FALSE.
part5FN | Specify which output is used in the GGIR part5 results. Defaut is “WW_L50M125V500_T5A5”, which means that part5_daysummary_WW_L50M125V500_T5A5.csv and part5_personsummary_WW_L50M125V500_T5A5.csv are used in the analysis.
NfileEachBundle | Number of files in each bundle when the csv data were read and processed in a cluster. Default is 20.
trace | Specify if the intermediate results is printed when the function was executed. Default is FALSE.

### 3. Subset of samples (optional)

The postGGIR package not only simply transform/merge the activity and sleep data, but it also can do some prelimary data analysis such as principle componet analysis and feature extraction. Therefore, the basic data clean will be processed first as follows,

- data clean by removing valid days/samples defined by minimum required number of valid hours/days in the activity data
- remove duplicate samples

If you prefer to use all samples, just skip this part and use `rmDup=FALSE` as the default. Otherwise, if you want to remove some samples such as duplicates, there are two ways as follows,

- Edit R codes of “step 2” in this part. For example, the template will keep the later copy for duplicate samples
- Remove R codes of “step 2” in this part, and create studyname_samples_remove.csv file by filling “remove” in the “duplicate” column in the template file of studyname_samples_remove_temp.csv. The data will be kept unless duplicate=“remove”.

## Run R script

    call.afterggir(mode,filename2id)

Variables | Description
--- | ---
mode | Specify which of the five parts need to be run, e.g. mode = 0 makes that all R/Rmd/sh files are generated for other parts. When mode = 1, all csv files in the GGIR output directory were read, transformed and then merged. When mode = 2, the GGIR output files were checked and summarized in one excel sheet. When mode = 3, the merged data was cleaned according to the number of valid hours on each night and the number of valid days for each subject. When mode = 4, the cleaned data was imputed.
filename2id | This user-defined function will change the filename of the raw accelerometer file to the short ID for the purpose of identifying duplicate IDs.

## Run script in a cluster

    #!/bin/bash
    #
    #$ -cwd
    #$ -j y
    #$ -S /bin/bash
      source ~/.bash_profile

       cd /postGGIR/inst/example/afterGGIR;
       module load R ;
         R --no-save --no-restore --args  < studyname_ggir9s_postGGIR.pipeline.maincall.R  0
         R --no-save --no-restore --args  < studyname_ggir9s_postGGIR.pipeline.maincall.R  1
         R --no-save --no-restore --args  < studyname_ggir9s_postGGIR.pipeline.maincall.R  2
         R --no-save --no-restore --args  < studyname_ggir9s_postGGIR.pipeline.maincall.R  3
         R --no-save --no-restore --args  < studyname_ggir9s_postGGIR.pipeline.maincall.R  4

         R -e "rmarkdown::render('part5_studyname_postGGIR.report.Rmd'   )"
         R -e "rmarkdown::render('part6_studyname_postGGIR.nonwear.report.Rmd'   )"
         R -e "rmarkdown::render('part7a_studyname_postGGIR_JIVE_1_somefeatures.Rmd'   )"
         R -e "rmarkdown::render('part7b_studyname_postGGIR_JIVE_2_allfeatures.Rmd'   )"
         R -e "rmarkdown::render('part7c_studyname_postGGIR_JIVE_3_excelReport.Rmd'   )"

# Software Functionalities

## Part 1

The functions of part 1 read the activity data measured by Euclidian norm minus one (ENMO), a rotationally invariant measure of volume of acceleration, in long csv-spreadsheets and then the data was merged and transformed into a square matrix for all subjects. Depending on the time zone on which the devices were initialized, a day may have either 23 or 25 due to daylights savings time. On daylight savings crossovers, ENMO is averaged for duplicate timestamps between 1:00 AM and 2:00 AM, allowing for straightforward comparisons to standard 24-hour days. In addition to recording ENMO at each epoch, the angle of the z-axis (ANGLEZ) relative to the horizontal plane (degrees), used for estimating sleep periods, is merged and saved into an excel file. Additional data recorded by certain device, including the light mean, light peak, temperature mean, clipping score, and the Euclidian norm metric (EN) if available are merged with the ENMO data and saved under the ./data directory for part 1.

The activity data in the GGIR output is formatted in long csv-spreadsheets as follows,

timestamp | ENMO | anglez
2017-11-30T00:00:00+0100 | 8e-04 | -32.5758
2017-11-30T00:00:05+0100 | 0.0198 | -25.5726
2017-11-30T00:00:10+0100 | 0.0177 | 3.7972
2017-11-30T00:00:15+0100 | 0.0118 | 6.7154
2017-11-30T00:00:20+0100 | 0.0106 | 10.0357
2017-11-30T00:00:25+0100 | 0.0341 | 21.0143
2017-11-30T00:00:30+0100 | 0.1708 | 19.5008
…… | …… | ……
2017-11-30T23:59:55+0100 | 0.1504 | -0.596

Each row represents the corresponding ENMO and ANGLEZ values at a timestamp per 5 seconds epoch, which is specified by GGIR parameter (windowsizes) when running GGIR. After running part 1, the ENMO and ANGLEZ data are transformed into wide matrix in which each row represents 24 hours data for a day. For example, the ENMO data is formated as follows,

Date | 0:00:00 | 0:00:05 | 0:00:10 | 0:00:15 | 0:00:20 | 0:00:25 | 0:00:30 | …… | 23:59:55
11/30/2017 | 8.00E-04 | 0.0198 | 0.0177 | 0.0118 | 0.0106 | 0.0341 | 0.1708 | …… | 0.1504

Finally, the data was merged for all days and all subjects.

## Part 2

The functions of part 2 introduce descriptive variables of all accelerometer files in the GGIR output. In part 2, an excel file was output under the ./summary directory, which includes nine pages as follows, 1) List of files in the GGIR output (2) Summary of numbers of output files (3) List of duplicate IDs (4) ID errors (5) Number of valid days (6) Table of number of valid/missing days (7) Missing pattern (8) Frequency of the missing pattern (9) Description of all accelerometer files. Multiple plots were generated in a pdf file including the number of valid hours, days, missing pattern, etc. Technically, the raw accelerometer data was visited to obtain a complete input list for the purpose of examining missingness of GGIR output when user specified the path. Additionally, the summary results from GGIR output were also visited here to form a comprehensive data quality report in the part 2 of postGGIR.

## Part 3 and Part 4

The functions of part 3 introduce ‘flag’ variables for data cleaning of the merged ENMO and ANGLEZ data. By default, days with more than 16 hours were marked as valid days and subjects with more than 7 valid days were marked as valid samples. User can set these two parameters in the call to the main function (QCdays.alpha = 7, QChours.alpha = 16). Further, the data can be aggregated into minute-level or hour-level data as required by users. In part 4, ENMO data during estimated non-wear periods were imputed by taking the subject-level mean over all the valid days for each subject at that time. All output is saved under the ./data directory. In the output file, the following description variables are included: (1) number of valid hours; (2) missing pattern for each subject; (3) non-wear time in minutes; (4) an indicator variable to indicate if the visit should be removed for having multiple visits for some subjects which might lead to invalidity of independent and identically distribution in statistics and (5) the number of missing values after imputation. When the number of missing values after imputation is not zero, it means the activity data is missing on same timestamps among all days and therefore could not be imputed, therefore, such samples would be removed when systematic missingness was observed.

## Part 5

The functions of part 5 generate a comprehensive report in .html format. The report includes data quality checks and an exploratory data analysis using valid days of data. First, the numbers and missingness of GGIR output files are summarized for all GGIR parts. Second, duplicate samples were checked and marked, where the duplication might be caused by having multiple visits for some samples but only one visit will be kept in the data analysis such as functional principal component analysis (FPCA). Third, as shown in Figure 1, data quality is presented visually using the number of valid days, non-wear time, and missing data pattern. As an exploratory analysis, the data correlation, and the output of FPCA analysis was plotted in the report.

## Part 6 (Optional)

Estimated non-wear periods are loaded from the \(M\$metalong\$nonwearscore\) variable of the R data that was stored in the folder of /meta/basic of the GGIR output, which generate the matrix to clarify when data was imputed for each long epoch time window and the reason for imputation. This function will generate a non-wear matrix at minute level, coded as 0/1 for wear/non-wear time. This function will generate a non-wear matrix at minute level, and it could be skipped if user chose to use the imputation data in the JIVE application as default.

## Part 7

In part 7, 88 features were extracted from minute level activity data of three domains of sleep, physical activity, and circadian rhythmicity, which were based on outputs from GGIR v2.4.0 and calculated by R ActFrag and ActCR packages. The standard deviation across days on each subject was also created for each feature. The weekday and weekend specific features were extracted as well since most features in the sleep and physical activity showed significant difference between weekdays and weekends. In brief, sleep domain referred to sleep duration, midpoint, efficiency, etc. Physical activity referred to daily motor activity such as sedentary behavior, light, and moderate-to-vigorous physical activity (MVPA). Circadian rhythms were natural rhythms that regulates the sleep-wake cycle within every 24 hours. For example, the cosinor curve and FPCA analysis were used in modeling of biological rhythms. A comprehensive list of all features could be found in the supplementary table and the detailed definition could be found in the GGIR manual and Di et al.’s publication in 2019.

# Running postGGIR and Inspecting the results

## Input and output of part 0

- Command = call.afterggir(mode=0)
- Output folder = ./

Output | Description
--- | ---
part1_data.transform.R (use.cluster=TRUE, optional) | R code for data transformation and merge for every 20 files in each partition. When the number of .bin files is large ( > 1000), the data merge could take long time, user could split the job and submit the job to a cluster for parallel computing.
part1_data.transform.sw (use.cluster=TRUE, optional) | Submit the job to a cluster for parallel computing
part1_data.transform.merge.sw (use.cluster=TRUE, optional) | Merge all partitions for the ENMO and ANGLEZ data
part5_studyname_postGGIR.report.Rmd | R markdown file for generate a comprehensive report of data processing and explortatory plots.
part6_studyname_postGGIR.nonwear.report.Rmd | R markdown file for generate a report of nonwear score.
part7a_studyname_postGGIR_JIVE_1_somefeatures.Rmd | Extract some features from the actigraphy data using R
part7b_studyname_postGGIR_JIVE_2_allfeatures.Rmd | Extract other features from the GGIR output and merge all features together
part7c_studyname_postGGIR_JIVE_3_runJIVE.Rmd | Perform JIVE Decomposition for All Features using r.jive
part7d_studyname_postGGIR_JIVE_4_somefeatures_weekday.Rmd | Extract some weekday/weekend specific features from the actigraphy data using R

part9_swarm.sh | shell script to submit all jobs to the cluster

## Input and output of part 1

- Main input files: csv files under /meta/csv folders of GGIR output
- Command = call.afterggir(mode=1)
- Output folder = ./data

Output | Description
--- | ---
studyname_filesummary_csvlist.csv | File list in the ./csv folder of GGIR
studyname_filesummary_Rdatalist.csv | File list in the ./basic folder of GGIR
All_studyname_ANGLEZ.data.csv | Raw data of ANGLEZ after merge
All_studyname_ENMO.data.csv | Raw data of ENMO after merge
nonwearscore_studyname_f0_f1_Xs.csv | Data matrix of nonwearscore
nonwearscore_studyname_f0_f1_Xs.pdf | Plots for nonwearscore
plot.nonwearVSnvalidhours.csv | Nonwear data for plot
plot.nonwearVSnvalidhours.pdf | Nonwear plots
lightmean_studyname_f0_f1_Xs.csv | Data matrix of lightmean
lightpeak_studyname_f0_f1_Xs.csv | Data matrix of lightpeak
temperaturemean_studyname_f0_f1_Xs.csv | Data matrix of temperaturemean
clippingscore_studyname_f0_f1_Xs.csv | Raw data of clippingscore
EN_studyname_f0_f1_Xs.csv | Data matrix of EN

f0 and f1 are the file index to start and finish with
Xs is the epoch size to which acceleration was averaged (seconds) in GGIR output

## Input and output of part 2

- Main input files
  + ./data/All_studyname_ENMO.data.csv
  + GGIR results: part2, part4 and part5 (please specify \(part5FN\) in the main function)
  + GGIR raw data when bindir was specified

- Command = call.afterggir(mode=2)

- Output folder = ./summary

Output | Description
--- | ---
studyname_ggir_output_summary.xlsx | Description of all accelerometer files in the GGIR output. This excel file includs 9 pages as follows, (1) List of files in the GGIR output (2) Summary of files (3) List of duplicate IDs (4) ID errors (5) Number of valid days (6) Table of number of valid/missing days (7) Missing patten (8) Frequency of the missing pattern (9) Description of all accelerometer files.
part2daysummary.info.csv | Intermediate results for description of each accelerometer file.
studyname_ggir_output_summary_plot.pdf | Some plots such as the number of valid days, which were included in the part2a_studyname_postGGIR.report.html file as well.
studyname_samples_remove_temp.csv | Create studyname_samples_remove.csv file by filling “remove” in the “duplicate” column in this template. If duplicate=“remove”, the accelerometer files will not be used in the data analysis of part5.

## Input and output of part 3

- Main input file: ./data/All_studyname_ENMO.data.csv
- Command = call.afterggir(mode=3)
- Output folder = ./data

Output | Description
--- | ---
flag_All_studyname_ANGLEZ.data.Xs.csv | Adding flags for data cleaning of the raw ANGLEZ data
flag_All_studyname_ENMO.data.Xs.csv | Adding flags for data cleaning of the raw ENMO data
IDMatrix.flag_All_studyname_ENMO.data.60s.csv | ID matrix

*Xs is the epoch size to which acceleration was averaged (seconds) in GGIR output

## Input and output of part 4

- Main input file: ./data/flag_All_ studyname _ENMO.data.5s.csv
- Command = call.afterggir(mode=4)
- Output folder = ./data

Output | Description
--- | ---
impu.flag_All_studyname_ENMO.data.60s.csv | Imputation data for the merged ENMO data, and the missing values were imputated by the average ENMO over all the valid days for each subject.

## Description of flag variables in the output data

Variable | Description
--- | ---
filename | accelerometer file name
Date | date recored from the GGIR part2.summary file
id | IDs recored from the GGIR part2.summary file
calender_date | date in the format of yyyy-mm-dd
N.valid.hours | number of hours with valid data recored from the part2_daysummary.csv file in the GGIR output
N.hours | number of hours of measurement recored from the part2_daysummary.csv file in the GGIR output
weekday | day of the week-Day of the week
measurementday | day of measurement-Day number relative to start of the measurement
newID | new IDs defined as the user-defined function of filename2id(), e.g. substrings of the filename
Nmiss_c9_c31 | number of NAs from the 9th to 31th column in the part2_daysummary.csv file in the GGIR output
missing | “M” indicates missing for an invalid day, and “C” indicates completeness for a valid day
Ndays | number of days of measurement
ith_day | rank of the measurementday, for example, the value is 1,2,3,4,-3,-2,-1 for measurementday = 1,…,7
Nmiss | number of missing (invalid) days
Nnonmiss | number of non-missing (valid) days
misspattern | indicators of missing/nonmissing for all measurement days at the subject level
RowNonWear | number of columnns in the non-wearing matrix
NonWearMin | number of minutes of non-wearing
remove16h7day | indicator of a key qulity control output. If remove16h7day=1, the day need to be removed. If remove16h7day=0, the day need to be kept.
duplicate | If duplicate=“remove”, the accelerometer files will not be used in the data analysis of part5.
ImpuMiss.b | number of missing values on the ENMO data before imputation
ImpuMiss.a | number of missing values on the ENMO data after imputation
KEEP | The value is “keep”/“remove”, e.g. KEEP=“remove” if remove16h7day=1 or duplicate=“remove” or ImpuMiss.a>0

## Input and output of part 5

- Main input files
  - ./summary/studyname_ggir_output_summary.xlsx
  - ./summary/part24daysummary.info.csv
  - ./data/plot.nonwearVSnvalidhours.csv
  - ./data/impu.flag_All_studyname_ENMO.data.flag.epochOuts.csv
- Command: run part5_studyname_postGGIR.report.Rmd
- Output folder = ./

Output | Description
--- | ---
part5_studyname_postGGIR.report.html | A comprehensive report of data processing and explortatory plots.

## Input and output of part 6

- Main input file: nonwearscore_studyname_01_xx_900s.csv
- Command = run part6_studyname_postGGIR.nonwear.report.Rmd
- Output folder = ./

Folder | Output | Description
--- | --- | ---
./ | part6_studyname_postGGIR.nonwear.report.html | A report of nonwear score.
./data | JIVEraw_nonwearscore_studyname_f0_f1_Xs.csv | Imputation data matrix of nonwearscore (1/0)
./data | JIVEimpu_nonwearscore_studyname_f0_f1_Xs.csv | Data matrix of nonwearscore (1/0/NA)

f0 and f1 are the file index to start and finish with
Xs is the epoch size to which acceleration was averaged (seconds) in GGIR output

## Input and output of part 7a

- Main input
  - ./data/impu.flag_All_studyname_ENMO.data.flag.epochOuts.csv
  - GGIR: /results/QC/part4_nightsummary_sleep_full.csv
- Command = run part7a_studyname_postGGIR_JIVE_1_somefeatures.Rmd
- Output folder = ./

Output | Description
--- | ---
part7_studyname_all_features_dictionary.xlsx | Description of features
part7a_studyname_postGGIR_JIVE_1_somefeatures.html | Extract some features from the actigraphy data using R
part7a_studyname_some_features_page1_features.csv | List of some features
part7a_studyname_some_features_page2_face_day_PCs.csv | Function PCA at the day level using fpca.face( )
part7a_studyname_some_features_page3_face_subject_PCs.csv | Function PCA at the subject level using fpca.face( )
part7a_studyname_some_features_page4_denseFLMM_day_PCs.csv | Function PCA at the day level using denseFLMM( )
part7a_studyname_some_features_page5_denseFLMM_subject_PCs.csv | Function PCA at the subject level using denseFLMM( )

## Input and output of part 7b

- Main inputs
  - GGIR: part2_summary.csv
  - GGIR: part2_daysummary.csv
  - GGIR: part4_nightsummary_sleep_cleaned.csv
  - GGIR: /results/QC/part4_nightsummary_sleep_full.csv
  - GGIR: part5_daysummary_part5FN.csv
  - part7_studyname_all_features_dictionary.xlsx
- Command = run part7b_studyname_postGGIR_JIVE_2_allfeatures.Rmd
- Output folder = ./

Output | Description
--- | ---
part7b_studyname_postGGIR_JIVE_2_allfeatures.html | Extract other features from the GGIR output and merge all features together
part7b_studyname_all_features_1.csv | Raw data of all features
part7b_studyname_all_features_2.csv | Keep sample with valid ENMO inputs
part7b_studyname_all_features_2.csv.log | Log file of each variable of part5b_studyname_all_features_2.csv
plot_part7b_studyname_all_features_2.csv.pdf | Plot of each variable of part5b_studyname_all_features_2.csv
part7b_studyname_all_features_3.csv | Average variable at the subject level
part7b_studyname_all_features_3.csv.log | Log file of each variable of part5b_studyname_all_features_3.csv
plot_part7b_studyname_all_features_3.csv.pdf | Plot of each variable of part5b_studyname_all_features_3.csv
part7b_studyname_all_features_4.csv | subject level SD of each feature

## Input and output of part 7c

- Main inputs
  - part7b_studyname_all_features_3_subject.csv
  - part7b_studyname_all_features_4_subjectSD.csv
- Command = run part7c_studyname_postGGIR_JIVE_3_runJIVE.Rmd
- Output folder = ./

Output | Description
--- | ---
part7c_studyname_postGGIR_JIVE_4_outputReport.html | Perform JIVE Decomposition for All Features using r.jive
part7c_studyname_jive_Decomposition.csv | Joint and individual structure estimates
part7c_studyname_jive_predScore.csv | PCA scores of JIVE ( missing when jive.predict failes)
part7c_studyname_jive_predScore.csv | PCA scores of JIVE ( missing when jive.predict failes)

## Input and output of part 7d

- Main input: ./data/impu.flag_All_studyname_ENMO.data.flag.epochOuts.csv
- Command = run part7d_studyname_postGGIR_JIVE_5_somefeatures_weekday.Rmd
- Output folder = ./

Output | Description
--- | ---
part7d_studyname_some_features_page1.csv | Perform JIVE Decomposition for All Features using r.jive
part7d_weekday_studyname_all_features_3.csv | subject level mean of each feature on weekday
part7d_weekday_studyname_some_features_page4_denseFLMM_day_PCs.csv | Function PCA at the day level using denseFLMM( ) on weekday
part7d_weekday_studyname_some_features_page5_denseFLMM_subject_PCs.csv | Function PCA at the subject level using denseFLMM( ) on weekday
part7d_weekend_studyname_all_features_3.csv | subject level mean of each feature on weekend
part7d_weekend_studyname_some_features_page4_denseFLMM_day_PCs.csv | Function PCA at the day level using denseFLMM( ) on weekend
part7d_weekend_studyname_some_features_page5_denseFLMM_subject_PCs.csv | Function PCA at the subject level using denseFLMM( ) on weekend

## Description of features of domains of physical activity, sleep and circadian rhythmicity

Sleep Domain

Variable | Description
--- | ---
sleeponset | Detected onset of sleep expressed as hours since the midnight of the previous night.
wakeup | Detected waking time (after sleep period) expressed as hours since the midnight of the previous night.
number_sib_wakinghours | Number of sustained inactivity bouts during the day, with day referring to the time outside the Sleep Period Time window.
SleepDurationInSpt | Total sleep duration, which equals the accumulated nocturnal sustained inactivity bouts within the Sleep Period Time
sleep_Midpoint | Sleep Midpoint = (sleeponset + wakeup)/2.
sleep_efficiency | Sleep Efficiency = SleepDurationInSpt / (wakeup - sleeponset), which was the fraction of time spent asleep in the Sleep Period Time window.
N_atleast5minwakenight | Number of times awake during the night for at least 5 minutes
ACC_spt_sleep_mg | Average acceleration during sleep (mg)
Nblocks_spt_sleep | Number of blocks of night sleep within the Sleep period time window.

Physical Activity Domain

Variable | Description
--- | ---
TAC | Total volume of physical activity in the daytime
TLAC | Total volume of log-transformed physical activity in the daytime
TAC_24h | Total volume of physical activity within 24 hours
TLAC_24h | Total volume of log-transformed physical activity within 24 hours
sed_dur | Total daytime duration in minutes of sedentary activity
light_dur | Total daytime duration in minutes of light activity
mod_dur | Total daytime duration in minutes of moderate activity
vig_dur | Total daytime duration in minutes of vigorous activity
MVPA_dur | Total daytime duration in minutes of moderate to vigorous activity
sed_dur_M10 | Total duration in minutes of sedentary activity within M10 window
light_dur_M10 | Total duration in minutes of light activity within M10 window
mod_dur_M10 | Total duration in minutes of moderate activity within M10 window
vig_dur_M10 | Total duration in minutes of vigorous activity within M10 window
MVPA_dur_M10 | Total duration in minutes of moderate to vigorous activity within M10 window
sed_dur_24h | Total duration in minutes of sedentary activity within 24 hours
light_dur_24h | Total duration in minutes of light activity within 24 hours
mod_dur_24h | Total duration in minutes of moderate activity within 24 hours
vig_dur_24h | Total duration in minutes of vigorous activity within 24 hours
MVPA_dur_24h | Total duration in minutes of moderate to vigorous activity within 24 hours
mean_r | Mean sedentary bout duration.
mean_a | Mean active bout duration.
SATP | Sedentary to active transition probabilities.
ASTP | Active to sedentary transition probabilities.
Gini_r | Gini index for active bout, absolute variability normalized to the average bout duration (resting).
Gini_a | Gini index for sedentary bout, absolute variability normalized to the average bout duration (active).
alpha_r | Power law parameter for sedentary bout.
alpha_a | Power law parameter for active bout.
h_r | Hazard function for sedentary bout.
h_a | Hazard function for active bout.
dur_day_total_IN_min | Total duration of day in minutes spent in total inactivity during the day
dur_day_total_LIG_min | Total duration of day in minutes of light activity during the day
dur_day_total_MOD_min | Total duration of day in minutes of moderate activity during the day
dur_day_total_VIG_min | Total duration of day in minutes of vigorous activity during the day
dur_day_MVPA_bts_10_min | Total duration in minutes of Moderate and Vigorous Physical Activity (MVPA) for bouts 10 minutes or more
dur_day_MVPA_bts_5_10_min | Total duration in minutes of Moderate and Vigorous Physical Activity (MVPA) for bouts 5 to 10 minutes
dur_day_MVPA_bts_1_5_min | Total duration in minutes of Moderate and Vigorous Physical Activity (MVPA) for bouts 1 to 5 minutes
Nbouts_day_IN_bts_30 | Number of bouts of inactivity for bouts 30 minutes or more
Nbouts_day_IN_bts_20_30 | Number of bouts of inactivity for bouts 20 to 30 minutes
Nbouts_day_IN_bts_10_20 | Number of bouts of inactivity for bouts 10 to 20 minutes
Nbouts_day_LIG_bts_10 | Number of bouts of light for bouts 10 minutes or more
Nbouts_day_LIG_bts_5_10 | Number of bouts of light for bouts 5 to 10 minutes
Nbouts_day_LIG_bts_1_5 | Number of bouts of light for bouts 1 to 5 minutes
Nbouts_day_MVPA_bts_10 | Number of bouts of Moderate and Vigorous Physical Activity (MVPA) for bouts 10 minutes or more
Nbouts_day_MVPA_bts_5_10 | Number of bouts of Moderate and Vigorous Physical Activity (MVPA) for bouts 5 to 10 minutes
Nbouts_day_MVPA_bts_1_5 | Number of bouts of Moderate and Vigorous Physical Activity (MVPA) for bouts 1 to 5 minutes
Nblocks_day_total_IN | Number of blocks of total inactivity during day
Nblocks_day_total_LIG | Number of blocks of total light activity during day
Nblocks_day_total_MOD | Number of blocks of total moderate activity during day
Nblocks_day_total_VIG | Number of blocks of total vigorous activity during day

Circadian Rhythmicity Domain

Variable | Description
--- | ---
L5TIME_num | Timing of least active 5 hours
M10TIME_num | Timing of most active 10 hours
L5VALUE | Average acceleration value (mg) of least active 5 hours
M10VALUE | Average acceleration value (mg) of most active 10 hours
RA_ggir | Relative amplitude reflects the difference between M10 activity and L5 activity and RA_ggir = (M10VALUE-L5VALUE)/(M10VALUE+L5VALUE).
L5 | Average acceleration value (mg) of least active 5 hours
M10 | Average acceleration value (mg) of most active 10 hours
L5TIME | Timing of least active 5 hours
M10TIME | Timing of most active 10 hours
RA | Relative amplitude: (M10-L5)/(M10+L5) where M10= most active 10 hrs, L5 = least active 5 hour.
IV | Intra-daily variability measures fragmentation in the rest/activity rhythms.
IS | Inter-daily stability measures fragmentation in the rest/activity rhythms between different days.
IV_intradailyvariability | Intra-daily variability measures fragmentation in the rest/activity rhythms.
IS_interdailystability | Inter-daily stability measures fragmentation in the rest/activity rhythms between different days.
mesor | MESOR which is short for midline statistics of rhythm, which is a rhythm adjusted mean. This represents mean activity level.
amp | Amplitude, a measure of half the extend of predictable variation within a cycle. This represents the highest activity one can achieve.
acro | Acrophase, a measure of the time of the overall high values recurring in each cycle. Here it has a unit of radian. This represents time to reach the peak.
mesor_L | Mesor in the cosinor model by using log-transformed data.
amp_L | Amplitude log-transformed in the cosinor model by using log-transformed data.
acro_L | Acrophase log-transformed in the cosinor model by using log-transformed data.
PC1 | 1st principal component score from functional principal component analysis (FPCA).
PC2 | 2nd principal component score from functional principal component analysis (FPCA).
PC3 | 3rd principal component score from functional principal component analysis (FPCA).
PC4 | 4th principal component score from functional principal component analysis (FPCA).
PC5 | 5th principal component score from functional principal component analysis (FPCA).
PC6 | 6th principal component score from functional principal component analysis (FPCA).
PC7 | 7th principal component score from functional principal component analysis (FPCA).
PC8 | 8th principal component score from functional principal component analysis (FPCA).
PC9 | 9th principal component score from functional principal component analysis (FPCA).
PC10 | 10th principal component score from functional principal component analysis (FPCA).

#

# Reference

- Wei Guo, Andrew Leroux, Vadim Zipunnikov, Kathleen R Merikangas (2021) postGGIR: An Open-Source R/R-Markdown Package for Accelerometer Data Processing after Running GGIR. (Manuscript)