DNSEXT Working Group
Internet Engineering Task Force (IETF)                          J. Damas
Internet-Draft
Request for Comments: 6891                         Bond Internet Systems
STD: 75                                                         M. Graff
Obsoletes: 2671, 2673                                           M. Graff
(if approved)
Intended status: Standards Track                                           P. Vixie
Expires: July 4, 2013
Category: Standards Track                    Internet Systems Consortium
                                                       December 31, 2012
ISSN: 2070-1721                                               April 2013

                 Extension Mechanisms for DNS (EDNS(0))
                 draft-ietf-dnsext-rfc2671bis-edns0-10

Abstract

   The Domain Name System's wire protocol includes a number of fixed
   fields whose range has been or soon will be exhausted and does not
   allow requestors to advertise their capabilities to responders.  This
   document describes backward compatible backward-compatible mechanisms for allowing the
   protocol to grow.

   This document updates the EDNS(0) Extension Mechanisms for DNS (EDNS(0))
   specification (and obsoletes RFC 2671) based on feedback from
   deployment experience in several implementations.  It also obsoletes
   RFC 2673 ("Binary Labels in the Domain Name System") and adds
   considerations on the use of extended labels in the DNS.

Status of this This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid the IETF community.  It has
   received public review and has been approved for a maximum publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of six months this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 4, 2013.
   http://www.rfc-editor.org/info/rfc6891.

Copyright Notice

   Copyright (c) 2012 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . .  4   3
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  EDNS Support Requirement  . . . . . . . . . . . . . . . . . . .  5   4
   4.  DNS Message changes Changes . . . . . . . . . . . . . . . . . . . . .  5   4
     4.1.  Message Header  . . . . . . . . . . . . . . . . . . . . . .  5   4
     4.2.  Label Types . . . . . . . . . . . . . . . . . . . . . . .   5
     4.3.  UDP Message Size  . . . . . . . . . . . . . . . . . . . . .   5
   5.  Extended Label Types  . . . . . . . . . . . . . . . . . . . . .  6   5
   6.  The OPT pseudo-RR Pseudo-RR . . . . . . . . . . . . . . . . . . . . . .   6
     6.1.  OPT Record Definition . . . . . . . . . . . . . . . . . .   6
       6.1.1.  Basic elements . Elements  . . . . . . . . . . . . . . . . . . .   6
       6.1.2.  Wire Format . . . . . . . . . . . . . . . . . . . . .  7   6
       6.1.3.  OPT Record TTL Field Use  . . . . . . . . . . . . . . .   8
       6.1.4.  Flags . . . . . . . . . . . . . . . . . . . . . . . .  9   8
     6.2.  Behaviour . . . . . . . . . . . . . . . . . . . . . . . .   9
       6.2.1.  Cache behaviour Behaviour . . . . . . . . . . . . . . . . . . .   9
       6.2.2.  Fallback  . . . . . . . . . . . . . . . . . . . . . . .   9
       6.2.3.  Requestor's Payload Size  . . . . . . . . . . . . . . . 10   9
       6.2.4.  Responder's Payload Size  . . . . . . . . . . . . . . .  10
       6.2.5.  Payload Size Selection  . . . . . . . . . . . . . . . . 11  10
       6.2.6.  Support in MiddleBoxes . Middleboxes  . . . . . . . . . . . . . . . 11  10
   7.  Transport Considerations  . . . . . . . . . . . . . . . . . . . 12  11
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  12
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13  12
     9.1.  OPT Option Code Allocation Procedure  . . . . . . . . . . .  14
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . . .  14
     10.1.  Normative References . . . . . . . . . . . . . . . . . . .  14
     10.2.  Informative References . . . . . . . . . . . . . . . . . .  14
   Appendix A.  Document Editing History  . . . . . . . . . . . . . . 15
     A.1.  Changes since RFC2671  . . . . . . . . . . . . . . . . . . 15
     A.2.  Changes since -02  . . . . . . . . . . RFCs 2671 and 2673 . . . . . . . . . . 15  14
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . .  15

1.  Introduction

   DNS [RFC1035] specifies a Message Format message format, and within such messages
   there are standard formats for encoding options, errors, and name
   compression.  The maximum allowable size of a DNS Message message over UDP
   not using the extensions described in this document is limited to 512 bytes.
   Many of DNS's protocol limits, such as the maximum message size over
   UDP, are too small to efficiently support the additional information
   that can be conveyed in the DNS (e.g. (e.g., several IPv6 addresses or DNSSEC DNS
   Security (DNSSEC) signatures).  Finally, RFC 1035 does not define any
   way for implementations to advertise their capabilities to any of the
   other actors they interact with.

   [RFC2671] added an extension mechanism mechanisms to DNS.  This mechanism is  These mechanisms are
   widely supported supported, and a number of new DNS uses and protocol
   extensions depend on the presence of these extensions.  This memo
   refines that
   specification and obsoletes [RFC2671].

   Unextended agents will not know how to interpret the protocol
   extensions defined in [RFC2671] and restated here.  Extended agents
   need to be prepared for handling the interactions with unextended
   clients in the face of new protocol elements, elements and fall back gracefully
   to unextended DNS.

   EDNS is a hop-by-hop extension to DNS.  This means the use of EDNS is
   negotiated between each pair of hosts in a DNS resolution process.
   For instance process,
   for instance, the stub resolver communicating with the recursive
   resolver or the recursive resolver communicating with an
   authoritative server.

   [RFC2671] specified extended label types.  The only such label
   proposed was in [RFC2673] for a label type called "Bitstring Labels."
   For various reasons introducing a new label type was found "Bit-String Label"
   or "Binary Labels", with this latest term being the one in common
   use.  For various reasons, introducing a new label type was found to
   be extremely difficult, and [RFC2673] was moved to Experimental.
   This document deprecates Extended Labels, and therefore obsoletes [RFC2673], deprecating Binary Labels,
   obsoleting [RFC2673]. Labels.
   Extended labels remain defined, but their use is discouraged due to
   practical difficulties with deployment; their use in the future
   SHOULD only be considered after careful evaluation of the deployment
   hindrances.

2.  Terminology

   "Requestor" is refers to the side which that sends a request.  "Responder" is
   refers to an authoritative, recursive resolver, resolver or other DNS component which
   that responds to questions.  Other terminology is used here as per its use
   defined in the references. RFCs cited by this document.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

3.  EDNS Support Requirement

   EDNS provides a mechanism to improve the scalability of DNS as its
   uses get more diverse on the Internet.  It does this by enabling the
   use of UDP transport for DNS messages with sizes beyond the limits
   specified in RFC 1035 as well as providing extra data space for
   additional flags and return codes (RCODEs).  However, implementation
   experiencing
   experience indicates that adding new RCODEs should be avoided due to
   the difficulty in upgrading the installed base.  Flags SHOULD be used
   only when necessary for DNS resolution to function.

   For many uses, a an EDNS Option Code may be preferred.

   With

   Over time, some applications of DNS have made EDNS a requirement for
   their deployment.  For instance, DNSSEC uses the additional flag
   space introduced in EDNS to signal the request to include DNSSEC data
   in a DNS response.

   Given the increase in DNS response sizes when including larger data
   items such as AAAA Records, records, DNSSEC information (e.g. (e.g., RRSIG or
   DNSKEY)
   DNSKEY), or large TXT Records, records, the additional UDP payload
   capabilities provided by EDNS can help improve the scalability of the
   DNS by avoiding widespread use of TCP for DNS transport.

4.  DNS Message changes Changes

4.1.  Message Header

   The DNS Message Header's message header's second full 16-bit word is divided into a
   4-bit OPCODE, a 4-bit RCODE, and a number of 1-bit flags (see ,
   section
   Section 4.1.1 of [RFC1035]).  Some of these flag values were marked
   for future use, and most of these have since been allocated.  Also,
   most of the RCODE values are now in use.  The OPT pseudo-RR specified
   below contains extensions to the RCODE bit field as well as
   additional flag bits.

4.2.  Label Types

   The first two 2 bits of a wire format domain label are used to denote the
   type of the label.  [RFC1035] allocates two 2 of the four 4 possible types and
   reserves the other two. 2.  More label types were defined in [RFC2671].  This document obsoletes the
   The use of the 2-bit combination defined by [RFC2671] to identify
   extended label types. types remains valid.  However, it has been found that
   deployment of new label types is noticeably difficult and so is only
   recommended after careful evaluation of alternatives and the need for
   deployment.

4.3.  UDP Message Size

   Traditional DNS Messages messages are limited to 512 octets in size when sent
   over UDP [RFC1035].  Fitting the increasing amounts of data that can
   be transported in DNS in this 512-byte limit is becoming more
   difficult.  For instance, inclusion of DNSSEC records frequently
   requires a much larger response than a 512 byte 512-byte message can hold.

   EDNS(0) is intended to provide support for transporting these larger
   packet sizes while continuing to use UDP.  It specifies a way to advertise additional features such as
   larger response size capability, which is intended to help avoid
   truncated UDP responses responses, which then in turn cause retry over TCP.  It
   therefore provides support for transporting these larger packet sizes
   without needing to resort to TCP for transport.

5.  Extended Label Types

   The first octet in the on-the-wire representation of a DNS label
   specifies the label type; the basic DNS specification [RFC1035]
   dedicates the two 2 most significant bits of that octet for this purpose.

   [RFC2671] defined DNS label type 0b01 for use as an indication for
   Extended Label Types.
   extended label types.  A specific Extended Label Type extended label type was selected by
   the 6 least significant bits of the first octet.  Thus, Extended
   Label Types extended
   label types were indicated by the values 64-127 (0b01xxxxxx) in the
   first octet of the label.

   Extended Label Types label types are extremely difficult to deploy due to lack of
   support in clients and intermediate gateways gateways, as described in
   [RFC3363]
   [RFC3363], which moved [RFC2673] to experimental status, Experimental status; and
   [RFC3364], which describes the pros and cons.  As such such, proposals
   that contemplate extended labels SHOULD weigh this deployment cost
   against the possibility of implementing functionality in other ways.

   Finally, implementations MUST NOT generate or pass Binary Labels in
   their communications communications, as they are now deprecated.

6.  The OPT pseudo-RR Pseudo-RR

6.1.  OPT Record Definition

6.1.1.  Basic elements Elements

   An OPT pseudo-RR (sometimes called a meta-RR) MAY be added to the
   additional data section of a request.

   The OPT RR has RR type 41.

   If an OPT record is present in requests, a received request, compliant
   responders MUST include an OPT record in their respective responses.

   An OPT record does not carry any DNS data.  It is used only to
   contain control information pertaining to the question and answer question-and-answer
   sequence of a specific transaction.  OPT RRs MUST NOT be cached,
   forwarded, or stored in or loaded from master files.

   The OPT RR MAY be placed anywhere within the additional data section.
   When an OPT RR MUST is included within any DNS message message, it MUST be the
   only ONE OPT RR can be present. in that message.  If a query message with more than one
   OPT RR is received, a FORMERR (RCODE=1) MUST be returned.  The
   placement flexibility for the OPT RR does not override the need for
   the TSIG or SIG(0) RRs to be the last in the additional section
   whenever they are present.

6.1.2.  Wire Format

   An OPT RR has a fixed part and a variable set of options expressed as
   {attribute, value} pairs.  The fixed part holds some DNS meta data metadata,
   and also a small collection of basic extension elements which that we
   expect to be so popular that it would be a waste of wire space to
   encode them as {attribute, value} pairs.

   The fixed part of an OPT RR is structured as follows:

       +------------+--------------+------------------------------+
       | Field Name | Field Type   | Description                  |
       +------------+--------------+------------------------------+
       | NAME       | domain name  | MUST be 0 (root domain)      |
       | TYPE       | u_int16_t    | OPT (41)                     |
       | CLASS      | u_int16_t    | requestor's UDP payload size |
       | TTL        | u_int32_t    | extended RCODE and flags     |
       | RDLEN      | u_int16_t    | length of all RDATA          |
       | RDATA      | octet stream | {attribute,value} pairs      |
       +------------+--------------+------------------------------+

                               OPT RR Format

   The variable part of an OPT RR may contain zero or more options in
   the RDATA.  Each option MUST be treated as a bit field.  Each option
   is encoded as:

                 +0 (MSB)                            +1 (LSB)
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
   0: |                          OPTION-CODE                          |
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
   2: |                         OPTION-LENGTH                         |
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
   4: |                                                               |
      /                          OPTION-DATA                          /
      /                                                               /
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+

   OPTION-CODE
      Assigned by the Expert Review process as defined by the dnsext DNSEXT
      working group and the IESG.

   OPTION-LENGTH
      Size (in octets) of OPTION-DATA.

   OPTION-DATA
      Varies per OPTION-CODE.  MUST be treated as a bit field.

   The order of appearance of option tuples is not defined.  If one
   option modifies the behavior behaviour of another or multiple options are
   related to one another in some way, they have the same effect
   regardless of ordering in the RDATA wire encoding.

   Any OPTION-CODE values not understood by a responder or requestor
   MUST be ignored.  Specifications of such options might wish to
   include some kind of signaled acknowledgement.  For example, an
   option specification might say that if a responder sees and supports
   option XYZ, it MUST include option XYZ in its response.

6.1.3.  OPT Record TTL Field Use

   The extended RCODE and flags (which flags, which OPT stores in the RR TTL field) Time to Live
   (TTL) field, are structured as follows:

                 +0 (MSB)                            +1 (LSB)
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
   0: |         EXTENDED-RCODE        |            VERSION            |
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
   2: | DO|                           Z                               |
      +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+

   EXTENDED-RCODE
      Forms the upper 8 bits of extended 12-bit RCODE (together with the
      4 bits defined in [RFC1035].  Note that EXTENDED-RCODE value 0
      indicates that an unextended RCODE is in use (values 0 through
      15).

   VERSION
      Indicates the implementation level of the setter.  Full
      conformance with this specification is indicated by version
         ``0.'' '0'.
      Requestors are encouraged to set this to the lowest implemented
      level capable of expressing a transaction, to
         minimize minimise the
      responder and network load of discovering the greatest common
      implementation level between requestor and responder.  A
      requestor's version numbering strategy MAY ideally be a run time run-time
      configuration option.
      If a responder does not implement the VERSION level of the
      request, then it MUST respond with RCODE=BADVERS.  All responses
      MUST be limited in format to the VERSION level of the request, but
      the VERSION of each response SHOULD be the highest implementation
      level of the responder.  In this way way, a requestor will learn the
      implementation level of a responder as a side effect of every
      response, including error responses and including RCODE=BADVERS.

6.1.4.  Flags

   DO
      DNSSEC OK bit as defined by [RFC3225].

   Z
      Set to zero by senders and ignored by receivers, unless modified
      in a subsequent specification.

6.2.  Behaviour

6.2.1.  Cache behaviour Behaviour

   The OPT record MUST NOT be cached.

6.2.2.  Fallback

   If a requestor detects that the remote end does not support EDNS(0),
   it MAY issue queries without an OPT record.  It MAY cache this
   knowledge for a brief time in order to avoid fallback delays in the
   future.  However, if DNSSEC or any future option using EDNS is
   required, no fallback should be performed performed, as they these options are only signalled
   signaled through EDNS.  If an implementation detects that some
   servers for the zone support EDNS(0) while others would force the use
   of TCP to fetch all data, preference MAY be given to those which servers that
   support EDNS(0).  Implementers SHOULD analyse this choice and the
   impact on both endpoints.

6.2.3.  Requestor's Payload Size

   The requestor's UDP payload size (encoded in the RR CLASS field) is
   the number of octets of the largest UDP payload that can be
   reassembled and delivered in the requestor's network stack.  Note
   that path MTU, with or without fragmentation, could be smaller than
   this.

   Values lower than 512 MUST be treated as equal to 512.

   The requestor SHOULD place a value in this field that it can actually
   receive.  For example, if a requestor sits behind a firewall which that
   will block fragmented IP packets, a requestor SHOULD NOT choose a
   value which that will cause fragmentation.  Doing so will prevent large
   responses from being received, received and can cause fallback to occur.  This
   knowledge may be auto-detected by the implementation or provided by a
   human administrator.

   Note that a 512-octet UDP payload requires a 576-octet IP reassembly
   buffer.  Choosing between 1280 and 1410 bytes for IP (v4 or v6) over
   Ethernet would be reasonable.

   Bigger

   Where fragmentation is not a concern, use of bigger values SHOULD be
   considered by implementers to be used where
   fragmentation is not a concern. implementers.  Implementations SHOULD use their largest
   configured or implemented values as a starting point in an EDNS
   transaction in the absence of previous knowledge about the
   destination server.

   Choosing a very large value will guarantee fragmentation at the IP
   layer, and may prevent answers from being received due to loss of a
   single fragment loss or to misconfigured firewalls.

   The requestor's maximum payload size can change over time.  It MUST
   NOT be cached for use beyond the transaction in which it is
   advertised.

6.2.4.  Responder's Payload Size

   The responder's maximum payload size can change over time, time but can be
   reasonably be expected to remain constant between two closely spaced
   sequential transactions; transactions, for example, an arbitrary QUERY used as a
   probe to discover a responder's maximum UDP payload size, followed
   immediately by an UPDATE which that takes advantage of this size.  This is
   considered preferable to the outright use of TCP for oversized
   requests, if there is any reason to suspect that the responder
   implements EDNS, and if a request will not fit in the default 512
   512-byte payload size limit.

6.2.5.  Payload Size Selection

   Due to transaction overhead, it is not recommended to advertise an
   architectural limit as a maximum UDP payload size.  Even on system
   stacks capable of reassembling 64KB 64 KB datagrams, memory usage at low
   levels in the system will be a concern.  A good compromise may be the
   use of a an EDNS maximum payload size of 4096 octets as a starting
   point.

   A requestor MAY choose to implement a fallback to smaller advertised
   sizes to work around firewall or other network limitations.  A
   requestor SHOULD choose to use a fallback mechanism which that begins with
   a large size, such as 4096.  If that fails, a fallback around the
   1280-1410 byte
   range of 1280-1410 bytes SHOULD be tried, as it has a reasonable
   chance to fit within a single Ethernet frame.  Failing that, a
   requestor MAY choose a 512 byte 512-byte packet, which with large answers may
   cause a TCP retry.

   Values of less than 512 bytes MUST be treated as equal to 512 bytes.

6.2.6.  Support in MiddleBoxes Middleboxes
   In a network that carries DNS traffic traffic, there could be active
   equipment other than that participating directly in the DNS
   resolution process (stub and caching resolvers, authoritative
   servers) that affect affects the transmission of DNS messages (e.g. (e.g.,
   firewalls, load balancers, proxies, etc) etc.), referred to here as MiddleBoxes.
   "middleboxes".

   Conformant MiddleBoxes middleboxes MUST NOT limit DNS messages over UDP to 512
   bytes.

   MiddleBoxes which

   Middleboxes that simply forward requests to a recursive resolver MUST
   NOT modify and MUST NOT delete the OPT record contents in either
   direction.

   MiddleBoxes which

   Middleboxes that have additional functionality, such as answering
   queries or acting as intelligent forwarders, SHOULD be able to
   process the OPT record and act based on its contents.  These boxes
   middleboxes MUST consider the incoming request and any outgoing
   requests as separate transactions if the characteristics of the
   messages are different.

   A more in depth in-depth discussion of this type of equipment and other
   considerations regarding their interaction with DNS traffic is found
   in [RFC5625] [RFC5625].

7.  Transport Considerations

   The presence of an OPT pseudo-RR in a request should be taken as an
   indication that the requestor fully implements the given version of
   EDNS,
   EDNS and can correctly understand any response that conforms to that
   feature's specification.

   Lack of presence of an OPT record in a request MUST be taken as an
   indication that the requestor does not implement any part of this
   specification and that the responder MUST NOT include an OPT record
   in its response.

   Extended agents MUST be prepared for handling the interactions with
   unextended clients in the face of new protocol elements, elements and fall back
   gracefully to unextended DNS when needed.

   Responders which that choose not to implement the protocol extensions
   defined in this document MUST respond with a return code (RCODE) of
   FORMERR to messages containing an OPT RR record in the additional
   section and MUST NOT include an OPT record in the response.

   If there is a problem with processing the OPT record itself, such as
   an option value that is badly formatted or that includes out of range out-of-range
   values, a FORMERR MUST be returned.  If this occurs occurs, the response
   MUST include an OPT record.  This is intended to allow the requestor
   to distinguish between servers which that do not implement EDNS and format
   errors within EDNS.

   The minimal response MUST be the DNS header, question section, and an
   OPT record.  This MUST also occur when an a truncated response (using
   the DNS header's TC bit) is returned.

8.  Security Considerations

   Requestor-side specification of the maximum buffer size may open a
   DNS denial of service denial-of-service attack if responders can be made to send
   messages which that are too large for intermediate gateways to forward,
   thus leading to potential ICMP storms between gateways and
   responders.

   Announcing very large UDP buffer sizes may result in dropping of DNS
   messages by middleboxes (see Section 6.2.6).  This could cause
   retransmissions with no hope of success.  Some devices have been
   found to reject fragmented UDP packets.

   Announcing too small UDP buffer sizes that are too small may result in fallback
   to TCP with a corresponding load impact on DNS servers.  This is
   especially important with DNSSEC, where answers are much larger.

9.  IANA Considerations

   The IANA has assigned RR type code 41 for OPT.

   [RFC2671] specified a number of IANA sub-registries subregistries within "DOMAIN
   NAME SYSTEM PARAMETERS:" PARAMETERS":

   o  DNS EDNS(0) Options

   o  EDNS Version Number

   o  EDNS Header Flags

   Additionally, two entries were generated in existing registries:

   o  EDNS Extended Label Type in the DNS Label Types Registry registry

   o  Bad OPT Version in the DNS RCODES registry

   IANA is advised to update has updated references to [RFC2671] in these entries and sub-registries
   subregistries to this document.

   [RFC2671] created the "EDNS Extended DNS Label Type Registry".  We
   request that this Types registry.  This registry be closed. is to
   remain open.

   The registration procedure for the DNS Label Types registry is
   Standards Action.

   This document assigns option code 65535 in the "EDNS Option Codes" DNS EDNS0 Options
   registry to "Reserved for future expansion." expansion".

   The current status of the IANA registry for EDNS Option Codes at the
   time of publication of this document is

   o  0-4 assigned, per references in the registry

   o  5-65000 Available for assignment, unassigned

   o  65001-65534 Local/Experimental use

   o  65535 Reserved for future expansion

   [RFC2671] expands the RCODE space from 4 bits to 12 bits.  This
   allows more than the 16 distinct RCODE values allowed in [RFC1035].
   IETF Standards Action Review is required to add a new RCODE.

   This document assigns EDNS Extended RCODE 16 to "BADVERS" in the DNS
   RCODES registry.

   [RFC2671] called for the recording of assignment of extended label
   types 0bxx111111 as "Reserved for future extended label types". types"; the
   IANA registry currently contains "Reserved for future expansion".
   This request implied implied, at that time, a request to open a new registry
   for Extended Label
   Types extended label types, but due to the possibility of ambiguity ambiguity,
   new text registrations were instead made within the general "DNS DNS Label Types" registry
   Types registry, which also registers entries originally defined by
   [RFC1035].

   This document requests IANA to close registration of further  There is therefore no Extended Label Types registry, with
   all label types registered in the "DNS DNS Label Types registry.

   This document deprecates Binary Labels.  Therefore, the status for
   the DNS Label Types" Registry. Types registration "Binary Labels" is now "Historic".

   IETF Standards Action is required for assignments of new EDNS(0)
   flags.  Flags SHOULD be used only when necessary for DNS resolution
   to function.  For many uses, a an EDNS Option Code may be preferred.

   IETF Standards Action is required to create new entries in the EDNS
   Version Number registry.  Within the EDNS Option Code space space, Expert
   Review is required for allocation of an EDNS Option Code.  Per this
   document, IANA is
   requested to keep maintains a registry for the EDNS Option Code space.

9.1.  OPT Option Code Allocation Procedure

   OPT Option Codes are assigned by expert review. Expert Review.

   Assignment of Option Codes should be liberal, but duplicate
   functionality is to be avoided.

10.  References

10.1.  Normative References

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, November 1987.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2671]  Vixie, P., "Extension Mechanisms for DNS (EDNS0)", RFC
              2671, August 1999.

   [RFC3225]  Conrad, D., "Indicating Resolver Support of DNSSEC", RFC
              3225, December 2001.

10.2.  Informative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2673]  Crawford, M., "Binary Labels in the Domain Name System",
              RFC 2673, August 1999.

   [RFC3363]  Bush, R., Durand, A., Fink, B., Gudmundsson, O., and T.
              Hain, "Representing Internet Protocol version 6 (IPv6)
              Addresses in the Domain Name System (DNS)", RFC 3363,
              August 2002.

   [RFC3364]  Austein, R., "Tradeoffs in Domain Name System (DNS)
              Support for Internet Protocol version 6 (IPv6)", RFC 3364,
              August 2002.

   [RFC5625]  Bellis, R., "DNS Proxy Implementation Guidelines", BCP
              152, RFC 5625, August 2009.

Appendix A.  Document Editing History  Changes since RFCs 2671 and 2673

   Following is a list of high-level changes made to the original
   RFC2671.

A.1.  Changes since RFC2671 RFCs 2671 and 2673.

   o  Support for the OPT record is now mandatory.

   o  Extended label types obsoleted and the registry remain available, but their use is closed.
      discouraged as a general solution due to observed difficulties in
      their deployment on the Internet, as illustrated by the work with
      the "Binary Labels" type.

   o  The bitstring label type,  RFC 2673, which was already moved from draft to
      experimental, defined the "Binary Labels" type and is currently
      Experimental, is requested to be moved to historical. Historic.

   o  Changes  Made changes in how EDNS buffer sizes are selected, with and provided
      recommendations on how to select them.

   o  Front material (IPR notice and such) was updated to current
      requirements.

A.2.  Changes since -02

   o  Specified the method for allocation of constants.

   o  Cleaned up a lot of wording, along with quite a bit of document
      structure changes.

Authors' Addresses

   Joao Damas
   Bond Internet Systems
   Av Albufera 14
   S.S. Reyes, Madrid  28701
   ES

   Phone: +1 650.423.1312
   Email:
   EMail: joao@bondis.org

   Michael Graff

   Email:

   EMail: explorer@flame.org

   Paul Vixie
   Internet Systems Consortium
   950 Charter Street
   Redwood City, California  94063
   US

   Phone: +1 650.423.1301
   Email:
   EMail: vixie@isc.org