PCP Working Group M. Boucadair Internet-Draft France Telecom Intended status: Standards Track R. Penno Expires: March 22, 2013 D. Wing Cisco September 18, 2012 PCP Description Option draft-boucadair-pcp-description-option-01 Abstract This document extends Port Control Protocol (PCP) with the ability to associate a description with a PCP-instantiated mapping: DESCRIPTION Option. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on March 22, 2013. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of Boucadair, et al. Expires March 22, 2013 [Page 1] Internet-Draft PCP Description Option September 2012 publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Behaviour . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. Security Considerations . . . . . . . . . . . . . . . . . . . . 4 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5 6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6.1. Normative References . . . . . . . . . . . . . . . . . . . 5 6.2. Informative References . . . . . . . . . . . . . . . . . . 5 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 5 Boucadair, et al. Expires March 22, 2013 [Page 2] Internet-Draft PCP Description Option September 2012 1. Introduction This document extends the base PCP [I-D.ietf-pcp-base] with the ability to associate a description with a PCP-instantiated mapping: DESCRIPTION Option. This option can be used in the context of [I-D.ietf-pcp-upnp-igd-interworking]. This option has been defined first in [I-D.boucadair-pcp-extensions]. 2. Format This option can be used by a user (or an application) to indicate a description associated with a given mapping such as "FTP server", "My remote access to my CP router", "Camera", "Network attached storage serve", etc. Issues related to the usage of this field for troubleshooting or for any further usage are out of scope of this document. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | DESCRIPTION | Reserved | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Description | : : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ This Option: Option Name: Description Option (DESCRIPTION) Number: TBA in the optional-to-process range (IANA) Purpose: Used to associate a text description with a mapping Valid for Opcodes: MAP, PEER Length: Variable May appear in: both request and response Maximum occurrences: 1 Figure 1: Description Option Description field carries the description text. Boucadair, et al. Expires March 22, 2013 [Page 3] Internet-Draft PCP Description Option September 2012 3. Behaviour DESCRIPTION Option is optional to be supported by PCP Servers and PCP Clients. This option (Code TBA, Figure 1) MAY be included in a PCP MAP/PEER request to associate a description with the requested mapping. The PCP Server MAY be configurable to accept the DESCRIPTION Option. If the PCP Server does not support the DESCRIPTION Option or it is configured to reject it, received DESCRIPTION Options MUST be ignored by the PCP Server and no DESCRIPTION Option MUST be included in the response. The PCP Server MUST store the content of DESCRIPTION Option only if it supports the DESCRIPTION Option and if it is configured to accept handling DESCRIPTION Options it receives. If the PCP Client does not receive a DESCRIPTION Option in a response to a request enclosing a DESCRIPTION Option, this means the PCP Server does not support that Option. The PCP Client SHOULD avoid including the DESCRIPTION Option in any subsequent request to that PCP Server. If the DESCRIPTION Option is not included in the request, the PCP Server MUST NOT include the DESCRIPTION Option in the associated response. The maximum length SHOULD be configurable in the PCP Server. If a PCP Client includes a DESCRIPTION PCP Option with a length exceeding the maximum length supported by the PCP Server, only the portion of the Description field fitting that maximum length is stored by the PCP Server and returned to the PCP Client in the response. If the PCP Server receives a DESCRIPTION option having a length which does not exceed the maximum value configured, the PCP Server MUST record the complete sequence of the description text and MUST send back to the PCP Client the same DESCRIPTION Option as the one included in the request. The PCP Client MUST NOT include empty DESCRIPTION Option (i.e., Length set to 0) in a request. Empty DESCRIPTION Options MUST be ignored by the PCP Server. 4. Security Considerations Security considerations discussed in [I-D.ietf-pcp-base] must be considered. Boucadair, et al. Expires March 22, 2013 [Page 4] Internet-Draft PCP Description Option September 2012 5. IANA Considerations The following PCP Option Codes are to be allocated in the optional- to-process range: DESCRIPTION 6. References 6.1. Normative References [I-D.ietf-pcp-base] Wing, D., Cheshire, S., Boucadair, M., Penno, R., and P. Selkirk, "Port Control Protocol (PCP)", draft-ietf-pcp-base-26 (work in progress), June 2012. [I-D.ietf-pcp-upnp-igd-interworking] Boucadair, M., Dupont, F., Penno, R., and D. Wing, "Universal Plug and Play (UPnP) Internet Gateway Device (IGD)-Port Control Protocol (PCP) Interworking Function", draft-ietf-pcp-upnp-igd-interworking-03 (work in progress), September 2012. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. 6.2. Informative References [I-D.boucadair-pcp-extensions] Boucadair, M., Penno, R., and D. Wing, "Some Extensions to Port Control Protocol (PCP)", draft-boucadair-pcp-extensions-03 (work in progress), April 2012. Authors' Addresses Mohamed Boucadair France Telecom Rennes, 35000 France Email: mohamed.boucadair@orange.com Boucadair, et al. Expires March 22, 2013 [Page 5] Internet-Draft PCP Description Option September 2012 Reinaldo Penno Cisco USA Email: repenno@cisco.com Dan Wing Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134 USA Email: dwing@cisco.com Boucadair, et al. Expires March 22, 2013 [Page 6]